# ======================================================

# Conditionals and other variables controlling the build

# ======================================================

# NOTES ON BOOTSTRAPING PYTHON 3.6:

#

# Due to a dependency cycle between Python, gdb, rpm, pip, setuptools, wheel,

# and other packages, in order to rebase Python 3 one has to build in the

# following order:

#

# 1. At the same time:

#     - gdb without python support (add %%global _without_python 1 on top of gdb's SPEC file)

#     - python-rpm-generators with bootstrapping_python set to 1

#       (this can be done also during step 2., but should be done before 3.)

# 2. python3 with with_rewheel set to 0

# 3. At the same time:

#     - gdb with python support (remove %%global _without_python 1 on top of gdb's SPEC file)

#     - python-rpm-generators with bootstrapping_python set to 0

#       (this can be done at any later step without negative effects)

# 4. rpm

# 5. python-setuptools with bootstrap set to 1

# 6. python-pip with build_wheel set to 0

# 7. python-wheel with %%bcond_without bootstrap

# 8. python-setuptools with bootstrap set to 0 and also with_check set to 0

# 9. python-pip with build_wheel set to 1

# 10. pyparsing

# 11. python3 with with_rewheel set to 1

#

# Then the most important packages have to be built, starting from their

# various leaf dependencies recursively. After these have been built, a

# targeted rebuild should be requested for the rest.

#

# Currently these packages are recommended to have been built before a targeted

# rebuild after a python abi change:

#   python-sphinx, pytest, python-requests, cloud-init, dnf, anaconda, abrt

%bcond_without rewheel

%global pybasever 3.6

# pybasever without the dot:

%global pyshortver 36

%global pylibdir %{_libdir}/python%{pybasever}

%global dynload_dir %{pylibdir}/lib-dynload

# SOABI is defined in the upstream configure.in from Python-3.2a2 onwards,

# for PEP 3149:

#   http://www.python.org/dev/peps/pep-3149/

# ("configure.in" became "configure.ac" in Python 3.3 onwards, and in

# backports)

# ABIFLAGS, LDVERSION and SOABI are in the upstream Makefile

# With Python 3.3, we lose the "u" suffix due to PEP 393

%global ABIFLAGS_optimized m

%global ABIFLAGS_debug     dm

%global LDVERSION_optimized %{pybasever}%{ABIFLAGS_optimized}

%global LDVERSION_debug     %{pybasever}%{ABIFLAGS_debug}

%global SOABI_optimized cpython-%{pyshortver}%{ABIFLAGS_optimized}-%{_arch}-linux%{_gnu}

%global SOABI_debug     cpython-%{pyshortver}%{ABIFLAGS_debug}-%{_arch}-linux%{_gnu}

# All bytecode files are now in a __pycache__ subdirectory, with a name

# reflecting the version of the bytecode (to permit sharing of python libraries

# between different runtimes)

# See http://www.python.org/dev/peps/pep-3147/

# For example,

#   foo/bar.py

# now has bytecode at:

#   foo/__pycache__/bar.cpython-36.pyc

#   foo/__pycache__/bar.cpython-36.opt-1.pyc

#	foo/__pycache__/bar.cpython-36.opt-2.pyc

%global bytecode_suffixes .cpython-36*.pyc

# Python's configure script defines SOVERSION, and this is used in the Makefile

# to determine INSTSONAME, the name of the libpython DSO:

#   LDLIBRARY='libpython$(VERSION).so'

#   INSTSONAME="$LDLIBRARY".$SOVERSION

# We mirror this here in order to make it easier to add the -gdb.py hooks.

# (if these get out of sync, the payload of the libs subpackage will fail

# and halt the build)

%global py_SOVERSION 1.0

%global py_INSTSONAME_optimized libpython%{LDVERSION_optimized}.so.%{py_SOVERSION}

%global py_INSTSONAME_debug     libpython%{LDVERSION_debug}.so.%{py_SOVERSION}

%bcond_without debug_build

%bcond_without optimizations

%global with_gdb_hooks 1

%global with_systemtap 0

# some arches don't have valgrind so we need to disable its support on them

%ifnarch s390 %{mips} riscv64

%global with_valgrind 1

%else

%global with_valgrind 0

%endif

%global with_gdbm 1

# Change from yes to no to turn this off

%global with_computed_gotos yes

%bcond_without tests

# We want to byte-compile the .py files within the packages using the new

# python3 binary.

#

# Unfortunately, rpmbuild's infrastructure requires us to jump through some

# hoops to avoid byte-compiling with the system python 2 version:

#   /usr/lib/rpm/redhat/macros sets up build policy that (amongst other things)

# defines __os_install_post.  In particular, "brp-python-bytecompile" is

# invoked without an argument thus using the wrong version of python

# (/usr/bin/python, rather than the freshly built python), thus leading to

# numerous syntax errors, and incorrect magic numbers in the .pyc files.  We

# thus override __os_install_post to avoid invoking this script:

%global __os_install_post /usr/lib/rpm/brp-compress \

  %{!?__debug_package:/usr/lib/rpm/brp-strip %{__strip}} \

  /usr/lib/rpm/brp-strip-static-archive %{__strip} \

  /usr/lib/rpm/brp-strip-comment-note %{__strip} %{__objdump} \

  /usr/lib/rpm/brp-python-hardlink

# to remove the invocation of brp-python-bytecompile, whilst keeping the

# invocation of brp-python-hardlink (since this should still work for python3

# pyc/pyo files)

# ==================

# Top-level metadata

# ==================

Summary: Version 3 of the Python programming language aka Python 3000

Name: python3

Version: %{pybasever}.2

Release: 0%{?dist}

License: Python

Group: Development/Languages

# =======================

# Build-time requirements

# =======================

# (keep this list alphabetized)

BuildRequires: autoconf

BuildRequires: bluez-libs-devel

BuildRequires: bzip2

BuildRequires: bzip2-devel

# expat 2.1.0 added the symbol XML_SetHashSalt without bumping SONAME.  We use

# it (in pyexpat) in order to enable the fix in Python-3.2.3 for CVE-2012-0876:

BuildRequires: expat-devel >= 2.1.0

BuildRequires: findutils

BuildRequires: gcc-c++

%if %{with_gdbm}

BuildRequires: gdbm-devel

%endif

BuildRequires: glibc-devel

BuildRequires: gmp-devel

BuildRequires: libffi-devel

BuildRequires: libGL-devel

BuildRequires: libX11-devel

BuildRequires: ncurses-devel

# workaround http://bugs.python.org/issue19804 (test_uuid requires ifconfig)

BuildRequires: net-tools

BuildRequires: openssl-devel

BuildRequires: pkgconfig

BuildRequires: readline-devel

BuildRequires: sqlite-devel

BuildRequires: desktop-file-utils

# Disabled the dependency on `libappstream-glib` for Python 3 in the Python 3

# module as it is not packaged in the Platform or any module yet, and has too

# many dependencies to be packaged in the Python 3 module.

#   BuildRequires: libappstream-glib

BuildRequires: systemtap-sdt-devel

BuildRequires: systemtap-devel

# (this introduces a dependency on "python", in that systemtap-sdt-devel's

# /usr/bin/dtrace is a python 2 script)

%global tapsetdir      /usr/share/systemtap/tapset

BuildRequires: tar

BuildRequires: tcl-devel

BuildRequires: tix-devel

BuildRequires: tk-devel

%if 0%{?with_valgrind}

BuildRequires: valgrind-devel

%endif

BuildRequires: xz-devel

BuildRequires: zlib-devel

%if %{with rewheel}

BuildRequires: python3-setuptools

BuildRequires: python3-pip

%endif

# =======================

# Source code and patches

# =======================

Source: https://www.python.org/ftp/python/%{version}/Python-%{version}.tar.xz

# Supply an RPM macro "py_byte_compile" for the python3-devel subpackage

# to enable specfiles to selectively byte-compile individual files and paths

# with different Python runtimes as necessary:

Source3: macros.pybytecompile%{pybasever}

# Systemtap tapset to make it easier to use the systemtap static probes

# (actually a template; LIBRARY_PATH will get fixed up during install)

# Written by dmalcolm; not yet sent upstream

Source5: libpython.stp

# Example systemtap script using the tapset

# Written by wcohen, mjw, dmalcolm; not yet sent upstream

Source6: systemtap-example.stp

# Another example systemtap script that uses the tapset

# Written by dmalcolm; not yet sent upstream

Source7: pyfuntop.stp

# A simple script to check timestamps of bytecode files

# Run in check section with Python that is currently being built

# Written by bkabrda

Source8: check-pyc-and-pyo-timestamps.py

# A simple macro that enables packages to require system-python(abi) instead of python(abi)

Source9: macros.systempython

# Desktop menu entry for idle3

Source10: idle3.desktop

# AppData file for idle3

Source11: idle3.appdata.xml

# Fixup distutils/unixccompiler.py to remove standard library path from rpath:

# Was Patch0 in ivazquez' python3000 specfile:

Patch1:         Python-3.1.1-rpath.patch

# 00055 #

# Systemtap support: add statically-defined probe points

# Patch sent upstream as http://bugs.python.org/issue14776

# with some subsequent reworking to cope with LANG=C in an rpmbuild

# (where sys.getfilesystemencoding() == 'ascii')

Patch55: 00055-systemtap.patch

Patch102: 00102-lib64.patch

# 00104 #

# Only used when "%{_lib}" == "lib64"

# Another lib64 fix, for distutils/tests/test_install.py; not upstream:

Patch104: 00104-lib64-fix-for-test_install.patch

# 00111 #

# Patch the Makefile.pre.in so that the generated Makefile doesn't try to build

# a libpythonMAJOR.MINOR.a (bug 550692):

# Downstream only: not appropriate for upstream

Patch111: 00111-no-static-lib.patch

# 00132 #

# Add non-standard hooks to unittest for use in the "check" phase below, when

# running selftests within the build:

#   @unittest._skipInRpmBuild(reason)

# for tests that hang or fail intermittently within the build environment, and:

#   @unittest._expectedFailureInRpmBuild

# for tests that always fail within the build environment

#

# The hooks only take effect if WITHIN_PYTHON_RPM_BUILD is set in the

# environment, which we set manually in the appropriate portion of the "check"

# phase below (and which potentially other python-* rpms could set, to reuse

# these unittest hooks in their own "check" phases)

Patch132: 00132-add-rpmbuild-hooks-to-unittest.patch

# 00133 #

# 00133-skip-test_dl.patch is not relevant for python3: the "dl" module no

# longer exists

# 00137 #

# Some tests within distutils fail when run in an rpmbuild:

Patch137: 00137-skip-distutils-tests-that-fail-in-rpmbuild.patch

# 00146 #

# Support OpenSSL FIPS mode (e.g. when OPENSSL_FORCE_FIPS_MODE=1 is set)

# - handle failures from OpenSSL (e.g. on attempts to use MD5 in a

#   FIPS-enforcing environment)

# - add a new "usedforsecurity" keyword argument to the various digest

#   algorithms in hashlib so that you can whitelist a callsite with

#   "usedforsecurity=False"

# (sent upstream for python 3 as http://bugs.python.org/issue9216 ; see RHEL6

# python patch 119)

# - enforce usage of the _hashlib implementation: don't fall back to the _md5

#   and _sha* modules (leading to clearer error messages if fips selftests

#   fail)

# - don't build the _md5 and _sha* modules; rely on the _hashlib implementation

#   of hashlib

# (rhbz#563986)

# Note: Up to Python 3.4.0.b1, upstream had their own implementation of what

# they assumed would become sha3. This patch was adapted to give it the

# usedforsecurity argument, even though it did nothing (OpenSSL didn't have

# sha3 implementation at that time).In 3.4.0.b2, sha3 implementation was reverted

# (see http://bugs.python.org/issue16113), but the alterations were left in the

# patch, since they may be useful again if upstream decides to rerevert sha3

# implementation and OpenSSL still doesn't support it. For now, they're harmless.

Patch146: 00146-hashlib-fips.patch

# 00155 #

# Avoid allocating thunks in ctypes unless absolutely necessary, to avoid

# generating SELinux denials on "import ctypes" and "import uuid" when

# embedding Python within httpd (rhbz#814391)

Patch155: 00155-avoid-ctypes-thunks.patch

# 00157 #

# Update uid/gid handling throughout the standard library: uid_t and gid_t are

# unsigned 32-bit values, but existing code often passed them through C long

# values, which are signed 32-bit values on 32-bit architectures, leading to

# negative int objects for uid/gid values >= 2^31 on 32-bit architectures.

#

# Introduce _PyObject_FromUid/Gid to convert uid_t/gid_t values to python

# objects, using int objects where the value will fit (long objects otherwise),

# and _PyArg_ParseUid/Gid to convert int/long to uid_t/gid_t, with -1 allowed

# as a special case (since this is given special meaning by the chown syscall)

#

# Update standard library to use this throughout for uid/gid values, so that

# very large uid/gid values are round-trippable, and -1 remains usable.

# (rhbz#697470)

Patch157: 00157-uid-gid-overflows.patch

# 00160 #

# Python 3.3 added os.SEEK_DATA and os.SEEK_HOLE, which may be present in the

# header files in the build chroot, but may not be supported in the running

# kernel, hence we disable this test in an rpm build.

# Adding these was upstream issue http://bugs.python.org/issue10142

# Not yet sent upstream

Patch160: 00160-disable-test_fs_holes-in-rpm-build.patch

# 00163 #

# Some tests within test_socket fail intermittently when run inside Koji;

# disable them using unittest._skipInRpmBuild

# Not yet sent upstream

Patch163: 00163-disable-parts-of-test_socket-in-rpm-build.patch

# 00170 #

# In debug builds, try to print repr() when a C-level assert fails in the

# garbage collector (typically indicating a reference-counting error

# somewhere else e.g in an extension module)

# Backported to 2.7 from a patch I sent upstream for py3k

#   http://bugs.python.org/issue9263  (rhbz#614680)

# hiding the proposed new macros/functions within gcmodule.c to avoid exposing

# them within the extension API.

# (rhbz#850013

Patch170: 00170-gc-assertions.patch

# 00178 #

# Don't duplicate various FLAGS in sysconfig values

# http://bugs.python.org/issue17679

# Does not affect python2 AFAICS (different sysconfig values initialization)

Patch178: 00178-dont-duplicate-flags-in-sysconfig.patch

# 00180 #

# Enable building on ppc64p7

# Not appropriate for upstream, Fedora-specific naming

Patch180: 00180-python-add-support-for-ppc64p7.patch

# 00186 #

# Fix for https://bugzilla.redhat.com/show_bug.cgi?id=1023607

# Previously, this fixed a problem where some *.py files were not being

# bytecompiled properly during build. This was result of py_compile.compile

# raising exception when trying to convert test file with bad encoding, and

# thus not continuing bytecompilation for other files.

# This was fixed upstream, but the test hasn't been merged yet, so we keep it

Patch186: 00186-dont-raise-from-py_compile.patch

# 00188 #

# Downstream only patch that should be removed when we compile all guaranteed

# hashlib algorithms properly. The problem is this:

# - during tests, test_hashlib is imported and executed before test_lib2to3

# - if at least one hash function has failed, trying to import it triggers an

#   exception that is being caught and exception is logged:

#   http://hg.python.org/cpython/file/2de806c8b070/Lib/hashlib.py#l217

# - logging the exception makes logging module run basicConfig

# - when lib2to3 tests are run again, lib2to3 runs basicConfig again, which

#   doesn't do anything, because it was run previously

#   (logging.root.handlers != []), which means that the default setup

#   (most importantly logging level) is not overriden. That means that a test

#   relying on this will fail (test_filename_changing_on_output_single_dir)

Patch188: 00188-fix-lib2to3-tests-when-hashlib-doesnt-compile-properly.patch

# 00189 #

# Add the rewheel module, allowing to recreate wheels from already installed

# ones

# https://github.com/bkabrda/rewheel

Patch189: 00189-add-rewheel-module.patch

# 00205 #

# LIBPL variable in makefile takes LIBPL from configure.ac

# but the LIBPL variable defined there doesn't respect libdir macro

Patch205: 00205-make-libpl-respect-lib64.patch

# 00206 #

# Remove hf flag from arm triplet which is used

# by debian but fedora infra uses only eabi without hf

Patch206: 00206-remove-hf-from-arm-triplet.patch

# 00243 #

# Fix the triplet used on 64-bit MIPS

# rhbz#1322526: https://bugzilla.redhat.com/show_bug.cgi?id=1322526

# Upstream uses Debian-like style mips64-linux-gnuabi64

# Fedora needs the default mips64-linux-gnu

Patch243: 00243-fix-mips64-triplet.patch

# 00251

# Set values of prefix and exec_prefix in distutils install command

# to /usr/local if executable is /usr/bin/python* and RPM build

# is not detected to make pip and distutils install into separate location

# Fedora Change: https://fedoraproject.org/wiki/Changes/Making_sudo_pip_safe

Patch251: 00251-change-user-install-location.patch

# 00252

# Add executable option to install.py command to make it work for

# scripts specified as an entry_points

# Reported upstream: https://bugs.python.org/issue29411

Patch252: 00252-add-executable-option.patch

# 00262 #

# Backport of PEP 538: Coercing the legacy C locale to a UTF-8 based locale

# https://www.python.org/dev/peps/pep-0538/

# Fedora Change: https://fedoraproject.org/wiki/Changes/python3_c.utf-8_locale

# Original proposal: https://bugzilla.redhat.com/show_bug.cgi?id=1404918

Patch262: 00262-pep538_coerce_legacy_c_locale.patch

# 00264 #

# test_pass_by_value was added in Python 3.6.1 and on aarch64

# it is catching an error that was there, but wasn't tested before.

# Therefore skipping the test on aarch64 until fixed upstream.

# Reported upstream: http://bugs.python.org/issue29804

Patch264: 00264-skip-test-failing-on-aarch64.patch

# 00270 #

# Fix test_alpn_protocols from test_ssl as openssl > 1.1.0f

# changed the behaviour of the ALPN hook.

# Fixed upstream: http://bugs.python.org/issue30714

Patch270: 00270-fix-ssl-alpn-hook-test.patch

# 00271 #

# Make test_asyncio to not depend on the current signal handler

# as this can make it hang on koji, since it ignores SIGHUP.

# Reported upstream: http://bugs.python.org/issue31034

Patch271: 00271-asyncio-get-default-signal-handler.patch

# (New patches go here ^^^)

#

# When adding new patches to "python" and "python3" in Fedora, EL, etc.,

# please try to keep the patch numbers in-sync between all specfiles.

#

# More information, and a patch number catalog, is at:

#

#     https://fedoraproject.org/wiki/SIGs/Python/PythonPatches

# add correct arch for ppc64/ppc64le

# it should be ppc64le-linux-gnu/ppc64-linux-gnu instead powerpc64le-linux-gnu/powerpc64-linux-gnu

Patch5001: python3-powerppc-arch.patch

BuildRoot: %{_tmppath}/%{name}-%{version}-root

# ======================================================

# Additional metadata, and subpackages

# ======================================================

URL: https://www.python.org/

# See notes in bug 532118:

Provides: python(abi) = %{pybasever}

Requires: %{name}-libs%{?_isa} = %{version}-%{release}

# In order to support multiple python interpreters, apart from the system python3,

# for development purposes, new packages were introduced which can be installed in parallel

# with the main python3 package (e.g. 1369688), with the naming scheme 'python<version>',

# however in order to keep the upgrade path clean we need to Obsolete and Provide

# these packages at the main python3 package.

Obsoletes: python%{pyshortver}

Provides: python%{pyshortver} = %{version}-%{release}

%if %{with rewheel}

Requires: python3-setuptools

Requires: python3-pip

%endif

%description

Python is an interpreted, interactive, object-oriented programming

language often compared to Tcl, Perl, Scheme or Java. Python includes

modules, classes, exceptions, very high level dynamic data types

and dynamic typing. Python supports interfaces to many system calls and

libraries, as well as to various windowing systems (X11, Motif, Tk,

Mac and MFC).

Programmers can write new built-in modules for Python in C or C++.

Python can be used as an extension language for applications that

need a programmable interface.

Note that documentation for Python is provided in the python3-docs package.

This package provides the "python3" executable; most of the actual

implementation is within the "python3-libs" and "system-python-libs" packages.

%package libs

Summary:        Python runtime libraries

Group:          Development/Libraries

# For Modularity purpose we need not to include the dist-tag int he dependency

%if %(d="%{?dist}"; [ "${d#module-base-runtime-}x" != "${d}x" ] && echo 1 || echo 0)

Requires:       system-python-libs%{?_isa} = %{version}

%else

Requires:       system-python-libs%{?_isa} = %{version}-%{release}

%endif

# expat 2.1.0 added the symbol XML_SetHashSalt without bumping SONAME.  We use

# this symbol (in pyexpat), so we must explicitly state this dependency to

# prevent "import pyexpat" from failing with a linker error if someone hasn't

# yet upgraded expat:

Requires: expat >= 2.1.0

Provides: python3-enum34 = 1.0.4-5%{?dist}

Obsoletes: python3-enum34 < 1.0.4-5%{?dist}

%description libs

This package contains runtime libraries for use by Python:

- the libpython dynamic library, for use by applications that embed Python as

a scripting language, and by the main "python3" executable

- the Python standard library

%package -n system-python

Summary:        System Python executable

Group:          Development/Libraries

Requires:       system-python-libs%{?_isa} = %{version}-%{release}

Provides:       system-python(abi) = %{pybasever}

%description -n system-python

System Python provides a binary interpreter which uses system-python-libs,

a subset of standard Python library considered essential to run various tools,

requiring Python, that consider themselves "system tools".

%package -n system-python-libs

Summary:        System Python runtime libraries

Group:          Development/Libraries

%define __requires_exclude ^(/usr/bin/python3.*|python\\(abi\\) = 3\\..*)$

Requires: expat >= 2.1.0

# Python 3 built with glibc >= 2.24.90-26 needs to require it (rhbz#1410644).

Requires: glibc%{?_isa} >= 2.24.90-26

%description -n system-python-libs

This package contains files used to embed System Python into applications.

%package devel

Summary: Libraries and header files needed for Python development

Group: Development/Libraries

Requires: %{name} = %{version}-%{release}

Requires: %{name}-libs%{?_isa} = %{version}-%{release}

BuildRequires: python-rpm-macros

Requires: python-rpm-macros

Requires: python3-rpm-macros

Requires: python3-rpm-generators

Conflicts: %{name} < %{version}-%{release}

%description devel

The Python programming language's interpreter can be extended with

dynamically loaded extensions and can be embedded in other programs.

This package contains the header files and libraries needed to do

these types of tasks.

Install python3-devel if you want to develop Python extensions. The

python3 package will also need to be installed.  You'll probably also

want to install the python3-docs package, which contains Python

documentation.

%package tools

Summary: A collection of tools included with Python

Group: Development/Tools

Requires: %{name} = %{version}-%{release}

Requires: %{name}-tkinter = %{version}-%{release}

%description tools

This package contains several tools included with Python

%package tkinter

Summary: A GUI toolkit for Python

Group: Development/Languages

Requires: %{name} = %{version}-%{release}

%description tkinter

The Tkinter (Tk interface) program is a graphical user interface for

the Python scripting language.

%package test

Summary: The test modules from the main python3 package

Group: Development/Languages

Requires: %{name} = %{version}-%{release}

Requires: %{name}-tools = %{version}-%{release}

%description test

The test modules from the main %{name} package.

These are in a separate package to save space, as they are almost never used

in production.

You might want to install the python3-test package if you're developing

python code that uses more than just unittest and/or test_support.py.

%if %{with debug_build}

%package debug

Summary: Debug version of the Python runtime

Group: Applications/System

# The debug build is an all-in-one package version of the regular build, and

# shares the same .py/.pyc files and directories as the regular build.  Hence

# we depend on all of the subpackages of the regular build:

Requires: %{name}%{?_isa} = %{version}-%{release}

Requires: %{name}-libs%{?_isa} = %{version}-%{release}

Requires: %{name}-devel%{?_isa} = %{version}-%{release}

Requires: %{name}-test%{?_isa} = %{version}-%{release}

Requires: %{name}-tkinter%{?_isa} = %{version}-%{release}

Requires: %{name}-tools%{?_isa} = %{version}-%{release}

%description debug

python3-debug provides a version of the Python runtime with numerous debugging

features enabled, aimed at advanced Python users, such as developers of Python

extension modules.

This version uses more memory and will be slower than the regular Python build,

but is useful for tracking down reference-counting issues, and other bugs.

The bytecodes are unchanged, so that .pyc files are compatible between the two

versions of Python, but the debugging features mean that C/C++ extension

modules are ABI-incompatible with those built for the standard runtime.

It shares installation directories with the standard Python runtime, so that

.py and .pyc files can be shared. All compiled extension modules gain a "_d"

suffix ("foo_d.so" rather than "foo.so") so that each Python implementation

can load its own extensions.

%endif # with debug_build

# ======================================================

# The prep phase of the build:

# ======================================================

%prep

%setup -q -n Python-%{version}%{?prerel}

%if 0%{?with_systemtap}

# Provide an example of usage of the tapset:

cp -a %{SOURCE6} .

cp -a %{SOURCE7} .

%endif # with_systemtap

# Ensure that we're using the system copy of various libraries, rather than

# copies shipped by upstream in the tarball:

#   Remove embedded copy of expat:

rm -r Modules/expat || exit 1

#   Remove embedded copy of zlib:

rm -r Modules/zlib || exit 1

## Disabling hashlib patch for now as it needs to be reimplemented

## for OpenSSL 1.1.0.

# Don't build upstream Python's implementation of these crypto algorithms;

# instead rely on _hashlib and OpenSSL.

#

# For example, in our builds hashlib.md5 is implemented within _hashlib via

# OpenSSL (and thus respects FIPS mode), and does not fall back to _md5

# TODO: there seems to be no OpenSSL support in Python for sha3 so far

# when it is there, also remove _sha3/ dir

#for f in md5module.c sha1module.c sha256module.c sha512module.c; do

#    rm Modules/$f

#done

%if %{with rewheel}

%global pip_version 9.0.1

sed -r -i s/'_PIP_VERSION = "[0-9.]+"'/'_PIP_VERSION = "%{pip_version}"'/ Lib/ensurepip/__init__.py

%endif

#

# Apply patches:

#

%patch1 -p1

%if 0%{?with_systemtap}

%patch55 -p1 -b .systemtap

%endif

%if "%{_lib}" == "lib64"

%patch102 -p1

%patch104 -p1

%endif

%patch111 -p1

%patch132 -p1

%patch137 -p1

#patch146 -p1

%patch155 -p1

%patch157 -p1

%patch160 -p1

%patch163 -p1

%patch170 -p1

%patch178 -p1

%patch180 -p1

%patch186 -p1

%patch188 -p1

%if %{with rewheel}

%patch189 -p1

%endif

%patch205 -p1

%patch206 -p1

%patch243 -p1

%patch251 -p1

%patch252 -p1

%patch262 -p1

%ifarch aarch64

%patch264 -p1

%endif

%patch270 -p1

%patch271 -p1