diff --git a/.cvsignore b/.cvsignore
index 5b7c836..495edab 100644
--- a/.cvsignore
+++ b/.cvsignore
@@ -1 +1 @@
-clamav-0.95.3-norar.tar.bz2
+clamav-0.96.1-norar.tar.xz
diff --git a/clamav-0.92-open.patch b/clamav-0.92-open.patch
index 040fc20..48ad0c1 100644
--- a/clamav-0.92-open.patch
+++ b/clamav-0.92-open.patch
@@ -1,5 +1,7 @@
---- clamav-0.91.2/clamd/dazukoio_compat12.c.open	2007-03-06 14:38:06.000000000 +0100
-+++ clamav-0.91.2/clamd/dazukoio_compat12.c	2007-08-25 12:36:30.000000000 +0200
+Index: clamav-0.96.1/clamd/dazukoio_compat12.c
+===================================================================
+--- clamav-0.96.1.orig/clamd/dazukoio_compat12.c
++++ clamav-0.96.1/clamd/dazukoio_compat12.c
 @@ -89,7 +89,7 @@ int dazukoRegister_TS_compat12(struct da
  	if (dazuko->device < 0)
  	{
diff --git a/clamav-0.92-private.patch b/clamav-0.92-private.patch
index bab2948..61625a1 100644
--- a/clamav-0.92-private.patch
+++ b/clamav-0.92-private.patch
@@ -1,5 +1,7 @@
---- clamav-0.92/libclamav.pc.in.private
-+++ clamav-0.92/libclamav.pc.in
+Index: clamav-0.96.1/libclamav.pc.in
+===================================================================
+--- clamav-0.96.1.orig/libclamav.pc.in
++++ clamav-0.96.1/libclamav.pc.in
 @@ -6,6 +6,6 @@ includedir=@includedir@
  Name: libclamav
  Description: A GPL virus scanner
@@ -10,8 +12,10 @@
 +Libs: -L${libdir} -lclamav
 +Libs.private: -L${libdir} -lclamav @LIBCLAMAV_LIBS@
 +Cflags: -I${includedir}
---- clamav-0.92/clamav-config.in.private
-+++ clamav-0.92/clamav-config.in
+Index: clamav-0.96.1/clamav-config.in
+===================================================================
+--- clamav-0.96.1.orig/clamav-config.in
++++ clamav-0.96.1/clamav-config.in
 @@ -54,12 +54,8 @@ while test $# -gt 0; do
  	usage 0
  	;;
diff --git a/clamav-0.95-cliopts.patch b/clamav-0.95-cliopts.patch
index 90d173f..7d94b28 100644
--- a/clamav-0.95-cliopts.patch
+++ b/clamav-0.95-cliopts.patch
@@ -1,8 +1,8 @@
-Index: clamav-0.95rc1/shared/optparser.c
+Index: clamav-0.96.1/shared/optparser.c
 ===================================================================
---- clamav-0.95rc1.orig/shared/optparser.c
-+++ clamav-0.95rc1/shared/optparser.c
-@@ -211,7 +211,7 @@ const struct clam_option clam_options[] 
+--- clamav-0.96.1.orig/shared/optparser.c
++++ clamav-0.96.1/shared/optparser.c
+@@ -236,7 +236,7 @@ const struct clam_option __clam_options[
  
      { "ExitOnOOM", NULL, 0, TYPE_BOOL, MATCH_BOOL, 0, NULL, 0, OPT_CLAMD, "Stop the daemon when libclamav reports an out of memory condition.", "yes" },
  
diff --git a/clamav-0.95.3-umask.patch b/clamav-0.95.3-umask.patch
index 220f7ab..ada0fcd 100644
--- a/clamav-0.95.3-umask.patch
+++ b/clamav-0.95.3-umask.patch
@@ -1,8 +1,8 @@
-Index: clamav-0.95.3/clamav-milter/clamav-milter.c
+Index: clamav-0.96.1/clamav-milter/clamav-milter.c
 ===================================================================
---- clamav-0.95.3.orig/clamav-milter/clamav-milter.c
-+++ clamav-0.95.3/clamav-milter/clamav-milter.c
-@@ -306,7 +306,7 @@ int main(int argc, char **argv) {
+--- clamav-0.96.1.orig/clamav-milter/clamav-milter.c
++++ clamav-0.96.1/clamav-milter/clamav-milter.c
+@@ -365,7 +365,7 @@ int main(int argc, char **argv) {
  
      if((opt = optget(opts, "PidFile"))->enabled) {
  	FILE *fd;
@@ -11,11 +11,11 @@ Index: clamav-0.95.3/clamav-milter/clamav-milter.c
  
  	if((fd = fopen(opt->strarg, "w")) == NULL) {
  	    logg("!Can't save PID in file %s\n", opt->strarg);
-Index: clamav-0.95.3/shared/output.c
+Index: clamav-0.96.1/shared/output.c
 ===================================================================
---- clamav-0.95.3.orig/shared/output.c
-+++ clamav-0.95.3/shared/output.c
-@@ -270,7 +270,7 @@ int logg(const char *str, ...)
+--- clamav-0.96.1.orig/shared/output.c
++++ clamav-0.96.1/shared/output.c
+@@ -280,7 +280,7 @@ int logg(const char *str, ...)
  #endif
      if(logg_file) {
  	if(!logg_fp) {
@@ -24,11 +24,11 @@ Index: clamav-0.95.3/shared/output.c
  	    if((logg_fp = fopen(logg_file, "at")) == NULL) {
  		umask(old_umask);
  #ifdef CL_THREAD_SAFE
-Index: clamav-0.95.3/freshclam/freshclam.c
+Index: clamav-0.96.1/freshclam/freshclam.c
 ===================================================================
---- clamav-0.95.3.orig/freshclam/freshclam.c
-+++ clamav-0.95.3/freshclam/freshclam.c
-@@ -102,7 +102,7 @@ static void writepid(const char *pidfile
+--- clamav-0.96.1.orig/freshclam/freshclam.c
++++ clamav-0.96.1/freshclam/freshclam.c
+@@ -106,7 +106,7 @@ static void writepid(const char *pidfile
  {
  	FILE *fd;
  	int old_umask;
diff --git a/clamav-0.96-disable-jit.patch b/clamav-0.96-disable-jit.patch
new file mode 100644
index 0000000..01b3c79
--- /dev/null
+++ b/clamav-0.96-disable-jit.patch
@@ -0,0 +1,150 @@
+Index: clamav-0.96.1/clamd/clamd.c
+===================================================================
+--- clamav-0.96.1.orig/clamd/clamd.c
++++ clamav-0.96.1/clamd/clamd.c
+@@ -434,6 +434,9 @@ int main(int argc, char **argv)
+     if((opt = optget(opts,"BytecodeTimeout"))->enabled) {
+ 	cl_engine_set_num(engine, CL_ENGINE_BYTECODE_TIMEOUT, opt->numarg);
+     }
++    if((opt = optget(opts,"BytecodeDisableJIT"))->enabled) {
++	cl_engine_set_num(engine, CL_ENGINE_BYTECODE_DISABLEJIT, opt->numarg);
++    }
+ 
+     if(optget(opts,"PhishingScanURLs")->enabled)
+ 	dboptions |= CL_DB_PHISHING_URLS;
+Index: clamav-0.96.1/clamscan/manager.c
+===================================================================
+--- clamav-0.96.1.orig/clamscan/manager.c
++++ clamav-0.96.1/clamscan/manager.c
+@@ -404,6 +404,8 @@ int scanmanager(const struct optstruct *
+ 	cl_engine_set_num(engine, CL_ENGINE_BYTECODE_SECURITY, CL_BYTECODE_TRUST_ALL);
+     if((opt = optget(opts,"bytecode-timeout"))->enabled)
+ 	cl_engine_set_num(engine, CL_ENGINE_BYTECODE_TIMEOUT, opt->numarg);
++    if((opt = optget(opts,"bytecode-disable-jit"))->enabled)
++	cl_engine_set_num(engine, CL_ENGINE_BYTECODE_DISABLEJIT, opt->numarg);
+ 
+     if((opt = optget(opts, "tempdir"))->enabled) {
+ 	if((ret = cl_engine_set_str(engine, CL_ENGINE_TMPDIR, opt->strarg))) {
+Index: clamav-0.96.1/docs/man/clamd.conf.5.in
+===================================================================
+--- clamav-0.96.1.orig/docs/man/clamd.conf.5.in
++++ clamav-0.96.1/docs/man/clamd.conf.5.in
+@@ -253,6 +253,12 @@ Default: TrustSigned
+ Set bytecode timeout in milliseconds.
+ .br
+ Default: 60000
++.TP
++\fBBytecodeDisableJIT BOOL\fR
++Disable the JIT and fallback to interpreter mode.
++WARNING: disabling the JIT affects performance!
++.br
++Default: No
+ .TP 
+ \fBDetectPUA BOOL\fR
+ Detect Possibly Unwanted Applications.
+Index: clamav-0.96.1/docs/man/clamscan.1.in
+===================================================================
+--- clamav-0.96.1.orig/docs/man/clamscan.1.in
++++ clamav-0.96.1/docs/man/clamscan.1.in
+@@ -86,6 +86,10 @@ This option disables safety checks and m
+ .TP 
+ \fB\-\-bytecode\-timeout=N\fR
+ Set bytecode timeout in milliseconds (default: 60000 = 60s)
++.TP
++\fB\-\-bytecode\-disable\-jit\fR
++Disable the JIT and fallback to interpreter mode.
++WARNING: disable the JIT affects performance!
+ .TP 
+ \fB\-\-detect\-pua[=yes/no(*)]\fR
+ Detect Possibly Unwanted Applications.
+Index: clamav-0.96.1/etc/clamd.conf
+===================================================================
+--- clamav-0.96.1.orig/etc/clamd.conf
++++ clamav-0.96.1/etc/clamd.conf
+@@ -472,3 +472,8 @@ Example
+ # 
+ # Default: 60000
+ # BytecodeTimeout 60000
++ 
++# Disable JIT and fallback to interpreter. WARNING: disabling JIT affects performance.
++# 
++# Default: no
++#BytecodeDisableJIT no
+Index: clamav-0.96.1/libclamav/clamav.h
+===================================================================
+--- clamav-0.96.1.orig/libclamav/clamav.h
++++ clamav-0.96.1/libclamav/clamav.h
+@@ -144,7 +144,8 @@ enum cl_engine_field {
+     CL_ENGINE_TMPDIR,		    /* (char *) */
+     CL_ENGINE_KEEPTMP,		    /* uint32_t */
+     CL_ENGINE_BYTECODE_SECURITY,     /* uint32_t */
+-    CL_ENGINE_BYTECODE_TIMEOUT       /* uint32_t */
++    CL_ENGINE_BYTECODE_TIMEOUT,       /* uint32_t */
++    CL_ENGINE_BYTECODE_DISABLEJIT        /* uint32_t */
+ };
+ 
+ enum bytecode_security {
+Index: clamav-0.96.1/libclamav/others.c
+===================================================================
+--- clamav-0.96.1.orig/libclamav/others.c
++++ clamav-0.96.1/libclamav/others.c
+@@ -301,6 +301,7 @@ struct cl_engine *cl_engine_new(void)
+     new->bytecode_security = CL_BYTECODE_TRUST_SIGNED;
+     /* 5 seconds timeout */
+     new->bytecode_timeout = 60000;
++    new->disablejit = 0;
+     new->refcount = 1;
+     new->ac_only = 0;
+     new->ac_mindepth = CLI_DEFAULT_AC_MINDEPTH;
+@@ -399,6 +400,9 @@ int cl_engine_set_num(struct cl_engine *
+ 	case CL_ENGINE_BYTECODE_TIMEOUT:
+ 	    engine->bytecode_timeout = num;
+ 	    break;
++	case CL_ENGINE_BYTECODE_DISABLEJIT:
++	    engine->disablejit = num;
++	    break;
+ 	default:
+ 	    cli_errmsg("cl_engine_set_num: Incorrect field number\n");
+ 	    return CL_EARG;
+Index: clamav-0.96.1/libclamav/others.h
+===================================================================
+--- clamav-0.96.1.orig/libclamav/others.h
++++ clamav-0.96.1/libclamav/others.h
+@@ -253,6 +253,7 @@ struct cl_engine {
+     unsigned hook_lsig_ids;
+     enum bytecode_security bytecode_security;
+     uint32_t bytecode_timeout;
++    unsigned disablejit;
+ };
+ 
+ struct cl_settings {
+Index: clamav-0.96.1/libclamav/readdb.c
+===================================================================
+--- clamav-0.96.1.orig/libclamav/readdb.c
++++ clamav-0.96.1/libclamav/readdb.c
+@@ -2595,7 +2595,10 @@ int cl_load(const char *path, struct cl_
+ 	    return ret;
+ 
+     if((dboptions & CL_DB_BYTECODE) && !engine->bcs.engine && (engine->dconf->bytecode & BYTECODE_ENGINE_MASK)) {
+-	if((ret = cli_bytecode_init(&engine->bcs, engine->dconf->bytecode)))
++	unsigned dconfmask = engine->dconf->bytecode;
++	if (engine->disablejit)
++	    dconfmask &= BYTECODE_INTERPRETER;
++	if((ret = cli_bytecode_init(&engine->bcs, dconfmask)))
+ 	    return ret;
+     } else {
+ 	cli_dbgmsg("Bytecode engine disabled\n");
+Index: clamav-0.96.1/shared/optparser.c
+===================================================================
+--- clamav-0.96.1.orig/shared/optparser.c
++++ clamav-0.96.1/shared/optparser.c
+@@ -252,6 +252,9 @@ const struct clam_option __clam_options[
+ 	"Set bytecode security level.\nPossible values:\n\tNone - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS\n\tTrustSigned - trust bytecode loaded from signed .c[lv]d files,\n\t\t insert runtime safety checks for bytecode loaded from other sources\n\tParanoid - don't trust any bytecode, insert runtime checks for all\nRecommended: TrustSigned, because bytecode in .cvd files already has these checks\n","TrustSigned"},
+     { "BytecodeTimeout", "bytecode-timeout", 0, TYPE_NUMBER, MATCH_NUMBER, 60000, NULL, 0, OPT_CLAMD | OPT_CLAMSCAN, 
+ 	"Set bytecode timeout in miliseconds.\n","60000"},
++    { "BytecodeDisableJIT", "bytecode-disable-jit", 0, TYPE_BOOL, MATCH_BOOL, 0, NULL, 0, OPT_CLAMD | OPT_CLAMSCAN, 
++	"Disable JIT and fallback to interpreter. WARNING: disabling JIT affects performance.\n","no"},
++
+     { "DetectPUA", "detect-pua", 0, TYPE_BOOL, MATCH_BOOL, 0, NULL, 0, OPT_CLAMD | OPT_CLAMSCAN, "Detect Potentially Unwanted Applications.", "yes" },
+ 
+     { "ExcludePUA", "exclude-pua", 0, TYPE_STRING, NULL, -1, NULL, FLAG_MULTIPLE, OPT_CLAMD | OPT_CLAMSCAN, "Exclude a specific PUA category. This directive can be used multiple times.\nSee http://www.clamav.net/support/pua for the complete list of PUA\ncategories.", "NetTool\nPWTool" },
diff --git a/clamav-0.96-jitoff.patch b/clamav-0.96-jitoff.patch
new file mode 100644
index 0000000..cea2e5a
--- /dev/null
+++ b/clamav-0.96-jitoff.patch
@@ -0,0 +1,80 @@
+Index: clamav-0.96.1/etc/clamd.conf
+===================================================================
+--- clamav-0.96.1.orig/etc/clamd.conf
++++ clamav-0.96.1/etc/clamd.conf
+@@ -11,7 +11,7 @@ Example
+ # LogFile must be writable for the user running daemon.
+ # A full path is required.
+ # Default: disabled
+-#LogFile /tmp/clamd.log
++#LogFile /var/log/clamd.<SERVICE>
+ 
+ # By default the log file is locked for writing - the lock protects against
+ # running clamd multiple times (if want to run another clamd, please
+@@ -40,7 +40,7 @@ Example
+ 
+ # Use system logger (can work together with LogFile).
+ # Default: no
+-#LogSyslog yes
++LogSyslog yes
+ 
+ # Specify the type of syslog messages - please refer to 'man syslog'
+ # for facility names.
+@@ -54,7 +54,7 @@ Example
+ # This option allows you to save a process identifier of the listening
+ # daemon (main thread).
+ # Default: disabled
+-#PidFile /var/run/clamd.pid
++#PidFile /var/run/clamd.<SERVICE>/clamd.pid
+ 
+ # Optional path to the global temporary directory.
+ # Default: system specific (usually /tmp or /var/tmp).
+@@ -73,7 +73,7 @@ Example
+ 
+ # Path to a local socket file the daemon will listen on.
+ # Default: disabled (must be specified by a user)
+-#LocalSocket /tmp/clamd.socket
++#LocalSocket /var/run/clamd.<SERVICE>/clamd.sock
+ 
+ # Sets the group ownership on the unix socket.
+ # Default: disabled (the primary group of the user running clamd)
+@@ -183,11 +183,11 @@ Example
+ 
+ # Run as another user (clamd must be started by root for this option to work)
+ # Default: don't drop privileges
+-#User clamav
++User <USER>
+ 
+ # Initialize supplementary group access (clamd must be started by root).
+ # Default: no
+-#AllowSupplementaryGroups no
++AllowSupplementaryGroups yes
+ 
+ # Stop daemon when libclamav reports out of memory condition.
+ #ExitOnOOM yes
+@@ -474,6 +474,10 @@ Example
+ # BytecodeTimeout 60000
+  
+ # Disable JIT and fallback to interpreter. WARNING: disabling JIT affects performance.
+-# 
+-# Default: no
++#
++# This option has been turned off in Fedora due to security concerns
++# by default.  You might need to enable the 'clamd_use_jit' SELinux
++# boolean after enabling this option.
++#
++# Default: yes
+ #BytecodeDisableJIT no
+Index: clamav-0.96.1/shared/optparser.c
+===================================================================
+--- clamav-0.96.1.orig/shared/optparser.c
++++ clamav-0.96.1/shared/optparser.c
+@@ -252,7 +252,7 @@ const struct clam_option __clam_options[
+ 	"Set bytecode security level.\nPossible values:\n\tNone - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS\n\tTrustSigned - trust bytecode loaded from signed .c[lv]d files,\n\t\t insert runtime safety checks for bytecode loaded from other sources\n\tParanoid - don't trust any bytecode, insert runtime checks for all\nRecommended: TrustSigned, because bytecode in .cvd files already has these checks\n","TrustSigned"},
+     { "BytecodeTimeout", "bytecode-timeout", 0, TYPE_NUMBER, MATCH_NUMBER, 60000, NULL, 0, OPT_CLAMD | OPT_CLAMSCAN, 
+ 	"Set bytecode timeout in miliseconds.\n","60000"},
+-    { "BytecodeDisableJIT", "bytecode-disable-jit", 0, TYPE_BOOL, MATCH_BOOL, 0, NULL, 0, OPT_CLAMD | OPT_CLAMSCAN, 
++    { "BytecodeDisableJIT", "bytecode-disable-jit", 0, TYPE_BOOL, MATCH_BOOL, 1, NULL, 0, OPT_CLAMD | OPT_CLAMSCAN, 
+ 	"Disable JIT and fallback to interpreter. WARNING: disabling JIT affects performance.\n","no"},
+ 
+     { "DetectPUA", "detect-pua", 0, TYPE_BOOL, MATCH_BOOL, 0, NULL, 0, OPT_CLAMD | OPT_CLAMSCAN, "Detect Potentially Unwanted Applications.", "yes" },
diff --git a/clamav.spec b/clamav.spec
index 88935d7..d8a88e7 100644
--- a/clamav.spec
+++ b/clamav.spec
@@ -5,6 +5,7 @@
 %bcond_without		upstart
 %bcond_with		unrar
 %bcond_without		noarch
+%bcond_without		bytecode
 ##
 
 %global username	clamupdate
@@ -23,7 +24,7 @@
 
 Summary:	End-user tools for the Clam Antivirus scanner
 Name:		clamav
-Version:	0.95.3
+Version:	0.96.1
 Release:	%release_func 1200%{?snapshot:.%snapshot}
 
 License:	%{?with_unrar:proprietary}%{!?with_unrar:GPLv2}
@@ -37,7 +38,7 @@ Source999:	http://download.sourceforge.net/sourceforge/clamav/%name-%version%{?s
 # incompatible unrar from RARlabs. We have to pull this code out.
 # tarball was created by
 #   make clean-sources [TARBALL=<original-tarball>] [VERSION=<version>]
-Source0:	%name-%version%{?snapshot}-norar.tar.bz2
+Source0:	%name-%version%{?snapshot}-norar.tar.xz
 %endif
 Source1:	clamd-wrapper
 Source2:	clamd.sysconfig
@@ -50,13 +51,16 @@ Patch24:	clamav-0.92-private.patch
 Patch25:	clamav-0.92-open.patch
 Patch26:	clamav-0.95-cliopts.patch
 Patch27:	clamav-0.95.3-umask.patch
+# https://bugzilla.redhat.com/attachment.cgi?id=403775&action=diff&context=patch&collapsed=&headers=1&format=raw
+Patch28:	clamav-0.96-disable-jit.patch
+Patch29:	clamav-0.96-jitoff.patch
 BuildRoot:	%_tmppath/%name-%version-%release-root
 Requires:	clamav-lib = %version-%release
 Requires:	data(clamav)
 BuildRequires:	zlib-devel bzip2-devel gmp-devel curl-devel
 BuildRequires:	ncurses-devel
 BuildRequires:	%_includedir/tcpd.h
-BuildRequires:	bc
+%{?with_bytecode:BuildRequires:	bc tcl ocaml groff graphviz}
 
 %package filesystem
 Summary:	Filesystem structure for clamav
@@ -81,8 +85,6 @@ Group:		Development/Libraries
 Source100:	clamd-gen
 Requires:	clamav-lib        = %version-%release
 Requires:	clamav-filesystem = %version-%release
-Requires(pre):	%_libdir/pkgconfig
-Requires:	pkgconfig
 
 %package data
 Summary:	Virus signature data for the Clam Antivirus scanner
@@ -316,6 +318,8 @@ The Upstart initscripts for clamav-milter.
 %patch25 -p1 -b .open
 %patch26 -p1 -b .cliopts
 %patch27 -p1 -b .umask
+%patch28 -p1 -b .jit-disable
+%patch29 -p1 -b .jitoff
 
 install -p -m0644 %SOURCE300 clamav-milter/
 
@@ -342,15 +346,21 @@ sed -ri \
 %build
 CFLAGS="$RPM_OPT_FLAGS -Wall -W -Wmissing-prototypes -Wmissing-declarations -std=gnu99"
 export LDFLAGS='-Wl,--as-needed'
-# HACK: remove me, when configure uses $LIBS instead of $LDFLAGS for milter check
-export LIBS='-lmilter -lpthread'
+# HACK: remove me...
+export FRESHCLAM_LIBS='-lz'
 # IPv6 check is buggy and does not work when there are no IPv6 interface on build machine
 export have_cv_ipv6=yes
-%configure --disable-clamav --with-dbdir=/var/lib/clamav	\
-	--enable-milter --disable-static			\
-	--disable-rpath						\
-	--with-user=%username		\
-	--with-group=%username		\
+%configure \
+	--disable-static \
+	--disable-rpath \
+	--disable-silent-rules \
+	--disable-clamav \
+	--with-user=%username \
+	--with-group=%username \
+	--with-dbdir=/var/lib/clamav \
+	--enable-milter \
+	--enable-clamdtop \
+	%{!?with_bytecode:--disable-llvm} \
 	%{!?with_unrar:--disable-unrar}
 
 # TODO: check periodically that CLAMAVUSER is used for freshclam only
@@ -696,6 +706,14 @@ test "$1" != "0" || /sbin/initctl -q stop clamav-milter || :
 
 
 %changelog
+* Sun Jun 20 2010 Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> - 0.96.1-1200
+- updated to 0.96.1
+- applied upstream patch which allows to disable JIT compiler (#573191)
+- disabled JIT compiler by default
+- removed explicit 'pkgconfig' requirements in -devel (#533956)
+- added some BRs
+- rediffed patches
+
 * Sat Nov 21 2009 Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de>
 - adjusted chkconfig positions for clamav-milter (#530101)
 
diff --git a/lastver b/lastver
index 4d8fc8c..483b771 100644
--- a/lastver
+++ b/lastver
@@ -1 +1 @@
-0.95.3
+0.96.1
diff --git a/sources b/sources
index 898c137..b30d6e5 100644
--- a/sources
+++ b/sources
@@ -1 +1 @@
-7a76425f5cffb9973d6ee45580dc2094  clamav-0.95.3-norar.tar.bz2
+d7a79bcd71da15817d6c731f989cf73a  clamav-0.96.1-norar.tar.xz