# workaround LTO related issue when stripping the target files (#1863378)
%global __brp_strip_lto %{nil}
%global cross cross
%global rpmprefix %{nil}
%global build_all 1
%global build_aarch64 %{build_all}
%global build_alpha %{build_all}
%global build_arm %{build_all}
%global build_arc %{build_all}
%global build_avr32 %{build_all}
%global build_blackfin %{build_all}
%global build_c6x %{build_all}
%global build_cris %{build_all}
%global build_frv %{build_all}
%global build_h8300 %{build_all}
%global build_hppa %{build_all}
%global build_hppa64 %{build_all}
%global build_ia64 %{build_all}
%global build_loongarch64 %{build_all}
%global build_m68k %{build_all}
%global build_microblaze %{build_all}
%global build_mips64 %{build_all}
%global build_mn10300 %{build_all}
%global build_nios2 %{build_all}
%global build_openrisc %{build_all}
%global build_powerpc64 %{build_all}
%global build_powerpc64le %{build_all}
%global build_riscv64 %{build_all}
%global build_s390x %{build_all}
%global build_sh %{build_all}
%global build_sparc64 %{build_all}
%global build_x86_64 %{build_all}
%global build_xtensa %{build_all}
# built compiler generates lots of ICEs
# - none at this time
# gcc considers obsolete
%global build_cris 0
%global build_m32r 0
%global build_score 0
%global build_sh 0
%global build_sh64 0
# gcc doesn't build
# - none at this time
# 32-bit packages we don't build as we can use the 64-bit package instead
%global build_i386 0
%global build_mips 0
%global build_powerpc 0
%global build_s390 0
%global build_sh4 0
%global build_sparc 0
# gcc doesn't support
%global build_metag 0
# not available in binutils-2.22
%global build_unicore32 0
%global multilib_64_archs sparc64 ppc64 s390x x86_64
# we won't build libgcc for these as it depends on C library or kernel headers
# % global no_libgcc_targets nios2*
%global no_libgcc_targets none
###############################################################################
#
# The gcc versioning information. In a sed command below, the specfile winds
# pre-release version numbers in BASE-VER back to the last actually-released
# number.
%global DATE 20230728
%global gitrev 8a3e2d71f2a0309540e68c79dadd66a06ca3da73
%global gcc_version 13.2.1
%global gcc_major 13
# Note, cross_gcc_release must be integer, if you want to add suffixes
# to %%{release}, append them after %%{cross_gcc_release} on Release:
# line. gcc_release is the Fedora gcc release that the patches were
# taken from.
%global gcc_release 2
%global cross_gcc_release 1
%global cross_binutils_version 2.39-3
%global isl_version 0.16.1
%global isl_libmajor 15
%global _performance_build 1
# Hardening slows the compiler way too much.
%undefine _hardened_build
Summary: Cross C compiler
Name: %{cross}-gcc
Version: %{gcc_version}
Release: %{cross_gcc_release}%{?dist}.2
# libgcc, libgfortran, libmudflap, libgomp, libstdc++ and crtstuff have
# GCC Runtime Exception.
License: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
URL: http://gcc.gnu.org
BuildRequires: gcc-c++
BuildRequires: isl-devel >= %{isl_version}
# The source for this package was pulled from upstream's vcs. Use the
# following commands to generate the tarball:
# git clone --depth 1 git://gcc.gnu.org/git/gcc.git gcc-dir.tmp
# git --git-dir=gcc-dir.tmp/.git fetch --depth 1 origin %%{gitrev}
# git --git-dir=gcc-dir.tmp/.git archive --prefix=%%{name}-%%{version}-%%{DATE}/ %%{gitrev} | xz -9e > %%{name}-%%{version}-%%{DATE}.tar.xz
# rm -rf gcc-dir.tmp
%global srcdir gcc-%{version}-%{DATE}
Source0: %{srcdir}.tar.xz
Patch0: gcc13-hack.patch
Patch2: gcc13-sparc-config-detection.patch
Patch3: gcc13-libgomp-omp_h-multilib.patch
Patch4: gcc13-libtool-no-rpath.patch
Patch5: gcc13-isl-dl.patch
Patch6: gcc13-isl-dl2.patch
Patch7: gcc13-libstdc++-docs.patch
Patch8: gcc13-no-add-needed.patch
Patch9: gcc13-Wno-format-security.patch
Patch10: gcc13-rh1574936.patch
Patch11: gcc13-d-shared-libphobos.patch
Patch900: cross-gcc-intl-filename.patch
Patch901: cross-gcc-format-config.patch
%if 0%{?fedora} >= 29 || 0%{?rhel} > 7
BuildRequires: binutils >= 2.31
%else
BuildRequires: binutils >= 2.24
%endif
BuildRequires: zlib-devel, gettext, dejagnu, bison, flex, texinfo, sharutils
BuildRequires: %{cross}-binutils-common >= %{cross_binutils_version}
# Make sure pthread.h doesn't contain __thread tokens
# Make sure glibc supports stack protector
# Make sure glibc supports DT_GNU_HASH
BuildRequires: glibc-devel >= 2.4.90-13
BuildRequires: elfutils-devel >= 0.147
BuildRequires: elfutils-libelf-devel >= 0.147
BuildRequires: gmp-devel >= 4.1.2-8, mpfr-devel >= 2.2.1, libmpc-devel >= 0.8.1
Provides: bundled(libiberty)
%description
Cross-build GNU C compiler collection.
%package -n %{cross}-gcc-common
Summary: Cross-build GNU C compiler documentation and translation files
BuildArch: noarch
%description -n %{cross}-gcc-common
Documentation, manual pages and translation files for cross-build GNU C
compiler.
This is the common part of a set of cross-build GNU C compiler packages for
building kernels for other architectures. No support for cross-building
user space programs is currently supplied as that would massively multiply the
number of packages.
###############################################################################
#
# Conditional arch package definition
#
###############################################################################
%global do_package() \
%if %2 \
%package -n %{rpmprefix}gcc-%1 \
Summary: Cross-build binary utilities for %1 \
Requires: %{cross}-gcc-common == %{version}-%{release} \
BuildRequires: %{rpmprefix}binutils-%1 >= %{cross_binutils_version} \
Requires: %{rpmprefix}binutils-%1 >= %{cross_binutils_version} \
Requires: gmp-devel >= 4.1.2-8, mpfr-devel >= 3.1.0, libmpc-devel >= 0.8.1 \
%if 0%{?__isa_bits} == 64 \
Requires: libisl.so.%{isl_libmajor}()(64bit) \
%else \
Requires: libisl.so.%{isl_libmajor} \
%endif \
%description -n %{rpmprefix}gcc-%1 \
Cross-build GNU C compiler. \
\
Only building kernels is currently supported. Support for cross-building \
user space programs is not currently provided as that would massively multiply \
the number of packages. \
\
%package -n %{rpmprefix}gcc-c++-%1 \
Summary: Cross-build binary utilities for %1 \
Requires: %{rpmprefix}gcc-%1 == %{version}-%{release} \
%description -n %{rpmprefix}gcc-c++-%1 \
Cross-build GNU C++ compiler. \
\
Only the compiler is provided; not libstdc++. Support for cross-building \
user space programs is not currently provided as that would massively multiply \
the number of packages. \
%endif
%global do_symlink() \
%if %2 \
%package -n gcc-%1 \
Summary: Cross-build binary utilities for %1 \
Requires: gcc-%3 == %{version}-%{release} \
%description -n gcc-%1 \
Cross-build GNU C++ compiler. \
\
Only building kernels is currently supported. Support for cross-building \
user space programs is not currently provided as that would massively multiply \
the number of packages. \
\
%package -n gcc-c++-%1 \
Summary: Cross-build binary utilities for %1 \
Requires: gcc-%1 == %{version}-%{release} \
Requires: gcc-c++-%3 == %{version}-%{release} \
%description -n gcc-c++-%1 \
Cross-build GNU C++ compiler. \
\
Only the compiler is provided; not libstdc++. Support for cross-building \
user space programs is not currently provided as that would massively multiply \
the number of packages. \
%endif
%do_package aarch64-linux-gnu %{build_aarch64}
%do_package alpha-linux-gnu %{build_alpha}
%do_package arc-linux-gnu %{build_arc}
%do_package arm-linux-gnu %{build_arm}
%do_package avr32-linux-gnu %{build_avr32}
%do_package bfin-linux-gnu %{build_blackfin}
%do_package c6x-linux-gnu %{build_c6x}
%do_package cris-linux-gnu %{build_cris}
%do_package frv-linux-gnu %{build_frv}
%do_package h8300-linux-gnu %{build_h8300}
%do_package hppa-linux-gnu %{build_hppa}
%do_package hppa64-linux-gnu %{build_hppa64}
%do_package i386-linux-gnu %{build_i386}
%do_package ia64-linux-gnu %{build_ia64}
%do_package loongarch64-linux-gnu %{build_loongarch64}
%do_package m32r-linux-gnu %{build_m32r}
%do_package m68k-linux-gnu %{build_m68k}
%do_package metag-linux-gnu %{build_metag}
%do_package microblaze-linux-gnu %{build_microblaze}
%do_package mips-linux-gnu %{build_mips}
%do_package mips64-linux-gnu %{build_mips64}
%do_package mn10300-linux-gnu %{build_mn10300}
%do_package nios2-linux-gnu %{build_nios2}
%do_package openrisc-linux-gnu %{build_openrisc}
%do_package powerpc-linux-gnu %{build_powerpc}
%do_package powerpc64-linux-gnu %{build_powerpc64}
%do_package powerpc64le-linux-gnu %{build_powerpc64le}
%do_symlink ppc-linux-gnu %{build_powerpc} powerpc-linux-gnu
%do_symlink ppc64-linux-gnu %{build_powerpc64} powerpc64-linux-gnu
%do_symlink ppc64le-linux-gnu %{build_powerpc64le} powerpc64le-linux-gnu
%do_package riscv64-linux-gnu %{build_riscv64}
%do_package s390-linux-gnu %{build_s390}
%do_package s390x-linux-gnu %{build_s390x}
%do_package score-linux-gnu %{build_score}
%do_package sh-linux-gnu %{build_sh}
%do_package sh4-linux-gnu %{build_sh4}
%do_package sh64-linux-gnu %{build_sh64}
%do_package sparc-linux-gnu %{build_sparc}
%do_package sparc64-linux-gnu %{build_sparc64}
%do_package unicore32-linux-gnu %{build_unicore32}
%do_package x86_64-linux-gnu %{build_x86_64}
%do_package xtensa-linux-gnu %{build_xtensa}
###############################################################################
#
# Preparation
#
###############################################################################
%prep
%setup -q -n %{srcdir} -c
cd %{srcdir}
%patch0 -p0 -b .hack~
%patch2 -p0 -b .sparc-config-detection~
%patch3 -p0 -b .libgomp-omp_h-multilib~
%patch4 -p0 -b .libtool-no-rpath~
%patch5 -p0 -b .isl-dl
%patch6 -p0 -b .isl-dl2
%patch7 -p0 -b .libc++docs
%patch8 -p0 -b .no-add-needed~
%patch9 -p0 -b .Wno-format-security~
%patch10 -p0 -b .rh1574936
%patch11 -p0 -b .shared-libphobos
%patch900 -p0 -b .cross-intl~
%patch901 -p0 -b .format-config~
echo 'Red Hat Cross %{version}-%{cross_gcc_release}' > gcc/DEV-PHASE
echo 'TM_H += $(srcdir)/config/rs6000/rs6000-modes.h' >> gcc/config/rs6000/t-rs6000
./contrib/gcc_update --touch
LC_ALL=C sed -i -e 's/\xa0/ /' gcc/doc/options.texi
sed -i -e 's/Common Driver Var(flag_report_bug)/& Init(1)/' gcc/common.opt
# This test causes fork failures, because it spawns way too many threads
rm -f gcc/testsuite/go.test/test/chan/goroutines.go
function prep_target () {
target=$1
cond=$2
if [ $cond != 0 ]
then
echo $1 >&5
fi
}
cd ..
(
prep_target aarch64-linux-gnu %{build_aarch64}
prep_target alpha-linux-gnu %{build_alpha}
prep_target arc-linux-gnu %{build_arc}
prep_target arm-linux-gnu %{build_arm}
prep_target avr32-linux-gnu %{build_avr32}
prep_target bfin-linux-gnu %{build_blackfin}
prep_target c6x-linux-gnu %{build_c6x}
prep_target cris-linux-gnu %{build_cris}
prep_target frv-linux-gnu %{build_frv}
prep_target h8300-linux-gnu %{build_h8300}
prep_target hppa-linux-gnu %{build_hppa}
prep_target hppa64-linux-gnu %{build_hppa64}
prep_target i386-linux-gnu %{build_i386}
prep_target ia64-linux-gnu %{build_ia64}
prep_target loongarch64-linux-gnu %{build_loongarch64}
prep_target m32r-linux-gnu %{build_m32r}
prep_target m68k-linux-gnu %{build_m68k}
prep_target metag-linux-gnu %{build_metag}
prep_target microblaze-linux-gnu %{build_microblaze}
prep_target mips-linux-gnu %{build_mips}
prep_target mips64-linux-gnu %{build_mips64}
prep_target mn10300-linux-gnu %{build_mn10300}
prep_target nios2-linux-gnu %{build_nios2}
prep_target openrisc-linux-gnu %{build_openrisc}
prep_target powerpc-linux-gnu %{build_powerpc}
prep_target powerpc64-linux-gnu %{build_powerpc64}
prep_target powerpc64le-linux-gnu %{build_powerpc64le}
prep_target riscv64-linux-gnu %{build_riscv64}
prep_target s390-linux-gnu %{build_s390}
prep_target s390x-linux-gnu %{build_s390x}
prep_target score-linux-gnu %{build_score}
prep_target sh-linux-gnu %{build_sh}
prep_target sh4-linux-gnu %{build_sh4}
prep_target sh64-linux-gnu %{build_sh64}
prep_target sparc-linux-gnu %{build_sparc}
prep_target sparc64-linux-gnu %{build_sparc64}
prep_target unicore32-linux-gnu %{build_unicore32}
prep_target x86_64-linux-gnu %{build_x86_64}
prep_target xtensa-linux-gnu %{build_xtensa}
) 5>target.list
n=0
for target in `cat target.list`
do
n=1
break
done
if [ $n = 0 ]
then
echo "No targets selected" >&2
exit 8
fi
###############################################################################
#
# Build
#
###############################################################################
%build
%global builddir %{_builddir}/%{srcdir}
# Undo the broken autoconf change in recent Fedora versions
export CONFIG_SITE=NONE
CC=gcc
CXX=g++
OPT_FLAGS=`echo %{optflags}|sed -e 's/\(-Wp,\)\?-D_FORTIFY_SOURCE=[12]//g'`
OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-flto=auto//g;s/-flto//g;s/-ffat-lto-objects//g'`
OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-m64//g;s/-m32//g;s/-m31//g'`
OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-mfpmath=sse/-mfpmath=sse -msse2/g'`
OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/ -pipe / /g'`
OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/ -g / -g1 /g'`
%ifarch sparc
OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-mcpu=ultrasparc/-mtune=ultrasparc/g;s/-mcpu=v[78]//g'`
%endif
%ifarch %{ix86}
OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-march=i.86//g'`
%endif
OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-Werror=format-security/-Wformat-security/g'`
OPT_FLAGS=`echo "$OPT_FLAGS" | sed -e 's/[[:blank:]]\+/ /g'`
case "$OPT_FLAGS" in
*-fasynchronous-unwind-tables*)
sed -i -e 's/-fno-exceptions /-fno-exceptions -fno-asynchronous-unwind-tables /' \
%{srcdir}/libgcc/Makefile.in
;;
esac
#
# Configure the compiler
#
cd %{builddir}
function config_target () {
echo "=== CONFIGURING $1"
arch=$1
prefix=$arch-
build_dir=$1
case $arch in
aarch64-*) target=aarch64-linux-gnu;;
arc-*) target=arc-linux-gnu;;
arm-*) target=arm-linux-gnueabi;;
avr32-*) target=avr-linux;;
bfin-*) target=bfin-uclinux;;
c6x-*) target=c6x-uclinux;;
h8300-*) target=h8300-elf;;
mn10300-*) target=am33_2.0-linux;;
m68knommu-*) target=m68k-linux;;
openrisc-*) target=or1k-linux-gnu;;
parisc-*) target=hppa-linux;;
score-*) target=score-elf;;
sh64-*) target=sh64-linux-elf;;
v850-*) target=v850e-linux;;
x86-*) target=x86_64-linux;;
*) target=$arch;;
esac
echo $arch: target is $target
#export CFLAGS="$RPM_OPT_FLAGS"
CONFIG_FLAGS=
case $arch in
arc-*)
CONFIG_FLAGS="--with-cpu=hs38"
;;
arm-*)
CONFIG_FLAGS="--with-tune=generic-armv7-a --with-arch=armv7-a \
--with-float=hard --with-fpu=vfpv3-d16 --with-abi=aapcs-linux"
;;
mips64-*)
CONFIG_FLAGS="--with-arch=mips64r2 --with-abi=64 --with-arch_32=mips32r2 --with-fp-32=xx"
;;
powerpc-*|powerpc64-*|ppc-*|ppc64-*)
CONFIG_FLAGS="--with-cpu-32=power7 --with-tune-32=power8 --with-cpu-64=power7 --with-tune-64=power8 --enable-secureplt"
;;
powerpc64le-*|ppc64le-*)
CONFIG_FLAGS="--with-cpu-32=power8 --with-tune-32=power8 --with-cpu-64=power8 --with-tune-64=power8 --enable-secureplt"
;;
s390*-*)
%if 0%{?fedora} >= 26 || 0%{?rhel} > 7
CONFIG_FLAGS="--with-arch=zEC12 --with-tune=z13 --enable-decimal-float"
%else
CONFIG_FLAGS="--with-arch=z9-109 --with-tune=z10 --enable-decimal-float"
%endif
;;
sh-*)
CONFIG_FLAGS=--with-multilib-list=m1,m2,m2e,m2a,m2a-single,m4,m4-single,m4-single-only,m4-nofpu
;;
sh4-*)
CONFIG_FLAGS=--with-multilib-list=m4,m4-single,m4-single-only,m4-nofpu
;;
sh64-*)
CONFIG_FLAGS=--with-multilib-list=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu
;;
sparc-*)
CONFIG_FLAGS="--disable-linux-futex --with-cpu=v7"
;;
sparc64-*)
CONFIG_FLAGS="--disable-linux-futex --with-cpu=ultrasparc"
;;
x86_64-*)
CONFIG_FLAGS="--with-arch_32=i686 --with-tune=generic --enable-cet"
;;
esac
case $arch in
alpha*|powerpc*|ppc*|s390*|sparc*)
CONFIG_FLAGS="$CONFIG_FLAGS --with-long-double-128" ;;
esac
case $arch in
i[3456]86*|x86_64*|ppc*|ppc64*|s390*|arm*|aarch64*|mips*)
CONFIG_FLAGS="$CONFIG_FLAGS --enable-gnu-indirect-function" ;;
esac
%ifnarch %{mips}
case $arch in
mips*) ;;
*) CONFIG_FLAGS="$CONFIG_FLAGS --with-linker-hash-style=gnu" ;;
esac
%endif
mkdir $build_dir
cd $build_dir
# We could optimize the cross builds size by --enable-shared but the produced
# binaries may be less convenient in the embedded environment.
CC="$CC" \
CXX="$CXX" \
CFLAGS="$OPT_FLAGS" \
CXXFLAGS="`echo " $OPT_FLAGS " | sed 's/ -Wall / /g;s/ -fexceptions / /g' \
| sed 's/ -Wformat-security / -Wformat -Wformat-security /'`" \
CFLAGS_FOR_TARGET="-g -O2 -Wall -fexceptions" \
AR_FOR_TARGET=%{_bindir}/$arch-ar \
AS_FOR_TARGET=%{_bindir}/$arch-as \
DLLTOOL_FOR_TARGET=%{_bindir}/$arch-dlltool \
LD_FOR_TARGET=%{_bindir}/$arch-ld \
NM_FOR_TARGET=%{_bindir}/$arch-nm \
OBJDUMP_FOR_TARGET=%{_bindir}/$arch-objdump \
RANLIB_FOR_TARGET=%{_bindir}/$arch-ranlib \
READELF_FOR_TARGET=%{_bindir}/$arch-readelf \
STRIP_FOR_TARGET=%{_bindir}/$arch-strip \
WINDRES_FOR_TARGET=%{_bindir}/$arch-windres \
WINDMC_FOR_TARGET=%{_bindir}/$arch-windmc \
LDFLAGS='-Wl,-z,relro ' \
../%{srcdir}/configure \
--bindir=%{_bindir} \
--build=%{_target_platform} \
--datadir=%{_datadir} \
--disable-decimal-float \
--disable-dependency-tracking \
--disable-gold \
--disable-libgcj \
--disable-libgomp \
--disable-libmpx \
--disable-libquadmath \
--disable-libssp \
--disable-libunwind-exceptions \
--disable-shared \
--disable-silent-rules \
--disable-sjlj-exceptions \
--disable-threads \
--with-ld=/usr/bin/$arch-ld \
--enable-__cxa_atexit \
--enable-checking=release \
--enable-gnu-unique-object \
--enable-initfini-array \
--enable-languages=c,c++ \
--enable-linker-build-id \
--enable-lto \
--enable-nls \
--enable-obsolete \
--enable-plugin \
%ifarch ppc ppc64 ppc64le ppc64p7
--enable-secureplt \
%endif
--enable-targets=all \
--exec-prefix=%{_exec_prefix} \
--host=%{_target_platform} \
--includedir=%{_includedir} \
--infodir=%{_infodir} \
--libexecdir=%{_libexecdir} \
--localstatedir=%{_localstatedir} \
--mandir=%{_mandir} \
--prefix=%{_prefix} \
--program-prefix=$prefix \
--sbindir=%{_sbindir} \
--sharedstatedir=%{_sharedstatedir} \
--sysconfdir=%{_sysconfdir} \
--target=$target \
--with-bugurl=http://bugzilla.redhat.com/bugzilla/ \
--with-gcc-major-version-only \
--with-isl \
--with-newlib \
--with-plugin-ld=%{_bindir}/$arch-ld \
--with-sysroot=%{_prefix}/$arch/sys-root \
--with-system-libunwind \
--with-system-zlib \
--without-headers \
$CONFIG_FLAGS
%if 0
--libdir=%{_libdir} # we want stuff in /usr/lib/gcc/ not /usr/lib64/gcc
%endif
cd ..
}
for target in `cat target.list`
do
config_target $target
done
function build_target () {
echo "=== BUILDING $1"
arch=$1
build_dir=$1
BUILD_FLAGS=
case $arch in
x86_64-*)
BUILD_FLAGS="gcc_cv_libc_provides_ssp=yes gcc_cv_as_ix86_tlsldm=yes"
;;
esac
AR_FOR_TARGET=%{_bindir}/$arch-ar \
AS_FOR_TARGET=%{_bindir}/$arch-as \
DLLTOOL_FOR_TARGET=%{_bindir}/$arch-dlltool \
LD_FOR_TARGET=%{_bindir}/$arch-ld \
NM_FOR_TARGET=%{_bindir}/$arch-nm \
OBJDUMP_FOR_TARGET=%{_bindir}/$arch-objdump \
RANLIB_FOR_TARGET=%{_bindir}/$arch-ranlib \
READELF_FOR_TARGET=%{_bindir}/$arch-readelf \
STRIP_FOR_TARGET=%{_bindir}/$arch-strip \
WINDRES_FOR_TARGET=%{_bindir}/$arch-windres \
WINDMC_FOR_TARGET=%{_bindir}/$arch-windmc \
make -C $build_dir %{_smp_mflags} tooldir=%{_prefix} $BUILD_FLAGS all-gcc
echo "=== BUILDING LIBGCC $1"
case $arch in
%{no_libgcc_targets})
;;
*)
make -C $build_dir tooldir=%{_prefix} all-target-libgcc
;;
esac
}
for target in `cat target.list`
do
build_target $target
done
###############################################################################
#
# Installation
#
###############################################################################
%install
rm -rf %{buildroot}
function install_bin () {
echo "=== INSTALLING $1"
arch=$1
cpu=${1%%%%-*}
case $arch in
%{no_libgcc_targets}) with_libgcc="";;
*) with_libgcc="install-target-libgcc";;
esac
make -C $arch DESTDIR=%{buildroot} install-gcc ${with_libgcc}
# We want links for ppc and ppc64 also if we make powerpc, powerpc64 or powerpc64le
case $cpu in
powerpc*)
cd %{buildroot}/usr/bin
for i in $cpu-*
do
ln -s $i ppc${i#powerpc}
done
cd -
;;
esac
}
for target in `cat target.list`
do
mkdir -p %{buildroot}%{_prefix}/$target/sys-root
install_bin $target
done
grep ^powerpc target.list | sed -e s/powerpc/ppc/ >symlink-target.list
# For cross-gcc we drop the documentation.
rm -rf %{buildroot}%{_infodir}
# Remove binaries we will not be including, so that they don't end up in
# gcc-debuginfo
rm -f %{buildroot}%{_libdir}/{libffi*,libiberty.a}
rm -f %{buildroot}%{_libexecdir}/gcc/*/%{gcc_major}/install-tools/{mkheaders,fixincl}
rm -f %{buildroot}%{_prefix}/bin/*-gcc-%{gcc_major} || :
rmdir %{buildroot}%{_includedir}
find %{buildroot}%{_datadir} -name gcc.mo |
while read x
do
y=`dirname $x`
mv $x $y/%{cross}-gcc.mo
done
%find_lang %{cross}-gcc
gzip %{buildroot}%{_mandir}/man1/*.1
rm %{buildroot}%{_mandir}/man7/*.7
rmdir %{buildroot}%{_mandir}/man7
# All the installed manual pages and translation files for each program are the
# same, so symlink them to the common package
cd %{buildroot}%{_mandir}/man1
for i in %{cross}-cpp.1.gz %{cross}-gcc.1.gz %{cross}-g++.1.gz %{cross}-gcov.1.gz
do
j=${i#%{cross}-}
for k in *-$j
do
if [ $k != $i -a ! -L $k ]
then
mv $k $i
ln -s $i $k
fi
done
done
# Add manpages the additional symlink-only targets
%if %{build_powerpc}%{build_powerpc64}%{build_powerpc64le}
for i in powerpc*
do
ln -s $i ppc${i#powerpc}
done
%endif
cd -
function install_lang () {
arch=$1
cpu=${arch%%%%-*}
case $cpu in
avr32) target_cpu=avr;;
bfin) target_cpu=bfin;;
h8300) target_cpu=h8300;;
mn10300) target_cpu=am33_2.0;;
openrisc) target_cpu=or1k;;
parisc) target_cpu=hppa;;
score) target_cpu=score;;
v850) target_cpu=v850e;;
x86) target_cpu=x86_64;;
*) target_cpu=$cpu;;
esac
(
echo '%{_bindir}/'$arch'*-cpp'
echo '%{_bindir}/'$arch'*-gcc'
echo '%{_bindir}/'$arch'*-gcc-ar'
echo '%{_bindir}/'$arch'*-gcc-nm'
echo '%{_bindir}/'$arch'*-gcc-ranlib'
echo '%{_bindir}/'$arch'*-gcov*'
echo '%{_bindir}/'$arch'*-lto-dump'
echo '%{_mandir}/man1/'$arch'*-cpp*'
echo '%{_mandir}/man1/'$arch'*-gcc*'
echo '%{_mandir}/man1/'$arch'*-gcov*'
echo '%{_mandir}/man1/'$arch'*-lto-dump*'
case $cpu in
ppc*|ppc64*)
;;
*)
echo '/usr/lib/gcc/'$target_cpu'-*/'
echo '%{_libexecdir}/gcc/'$target_cpu'-*/*/cc1'
echo '%{_libexecdir}/gcc/'$target_cpu'-*/*/collect2'
echo '%{_libexecdir}/gcc/'$target_cpu'-*/*/[abd-z]*'
echo %{_prefix}/$arch/sys-root
;;
esac
) >files.$arch
(
echo '%{_bindir}/'$arch'*-c++'
echo '%{_bindir}/'$arch'*-g++'
echo '%{_mandir}/man1/'$arch'*-g++*'
case $cpu in
ppc*|ppc64*)
;;
*)
echo '%{_libexecdir}/gcc/'$target_cpu'-*/*/cc1plus'
esac
) >files-c++.$arch
}
for target in `cat target.list symlink-target.list`
do
install_lang $target
done
%global __ar_no_strip $RPM_BUILD_DIR/%{srcdir}/ar-no-strip
cat >%{__ar_no_strip} <<EOF
#!/bin/bash
f=\$2
if [ \${f##*/} = libgcc.a -o \${f##*/} = libgcov.a ]
then
:
else
%{__strip} \$*
fi
EOF
chmod +x %{__ar_no_strip}
%undefine __strip
%global __strip %{__ar_no_strip}
###############################################################################
#
# Filesets
#
###############################################################################
%files -n %{cross}-gcc-common -f %{cross}-gcc.lang
%doc %{srcdir}/COPYING*
%doc %{srcdir}/README
%{_mandir}/man1/%{cross}-*
%global do_files() \
%if %2 \
%files -n %{rpmprefix}gcc-%1 -f files.%1 \
%files -n %{rpmprefix}gcc-c++-%1 -f files-c++.%1 \
%endif
%do_files aarch64-linux-gnu %{build_aarch64}
%do_files alpha-linux-gnu %{build_alpha}
%do_files arc-linux-gnu %{build_arc}
%do_files arm-linux-gnu %{build_arm}
%do_files avr32-linux-gnu %{build_avr32}
%do_files bfin-linux-gnu %{build_blackfin}
%do_files c6x-linux-gnu %{build_c6x}
%do_files cris-linux-gnu %{build_cris}
%do_files frv-linux-gnu %{build_frv}
%do_files h8300-linux-gnu %{build_h8300}
%do_files hppa-linux-gnu %{build_hppa}
%do_files hppa64-linux-gnu %{build_hppa64}
%do_files i386-linux-gnu %{build_i386}
%do_files ia64-linux-gnu %{build_ia64}
%do_files loongarch64-linux-gnu %{build_loongarch64}
%do_files m32r-linux-gnu %{build_m32r}
%do_files m68k-linux-gnu %{build_m68k}
%do_files metag-linux-gnu %{build_metag}
%do_files microblaze-linux-gnu %{build_microblaze}
%do_files mips-linux-gnu %{build_mips}
%do_files mips64-linux-gnu %{build_mips64}
%do_files mn10300-linux-gnu %{build_mn10300}
%do_files nios2-linux-gnu %{build_nios2}
%do_files openrisc-linux-gnu %{build_openrisc}
%do_files powerpc-linux-gnu %{build_powerpc}
%do_files powerpc64-linux-gnu %{build_powerpc64}
%do_files powerpc64le-linux-gnu %{build_powerpc64le}
%do_files ppc-linux-gnu %{build_powerpc}
%do_files ppc64-linux-gnu %{build_powerpc64}
%do_files ppc64le-linux-gnu %{build_powerpc64le}
%do_files riscv64-linux-gnu %{build_riscv64}
%do_files s390-linux-gnu %{build_s390}
%do_files s390x-linux-gnu %{build_s390x}
%do_files score-linux-gnu %{build_score}
%do_files sh-linux-gnu %{build_sh}
%do_files sh4-linux-gnu %{build_sh4}
%do_files sh64-linux-gnu %{build_sh64}
%do_files sparc-linux-gnu %{build_sparc}
%do_files sparc64-linux-gnu %{build_sparc64}
%do_files unicore32-linux-gnu %{build_unicore32}
%do_files x86_64-linux-gnu %{build_x86_64}
%do_files xtensa-linux-gnu %{build_xtensa}
%changelog
* Wed Jan 24 2024 Fedora Release Engineering <releng@fedoraproject.org> - 13.2.1-1.2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
* Fri Jan 19 2024 Fedora Release Engineering <releng@fedoraproject.org> - 13.2.1-1.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
* Mon Jul 31 2023 Peter Robinson <pbrobinson@fedoraproject.org> - 13.2.1-1
- Update to 13.2.1
- Re-enable PARISC (hppa/hppa64)
* Wed Jul 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 13.1.1-2.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
* Sat Jun 10 2023 Peter Robinson <pbrobinson@fedoraproject.org> - 13.1.1-2
- Fix libisl version issue
* Thu Jun 08 2023 Peter Robinson <pbrobinson@fedoraproject.org> - 13.1.1-1
- Update to gcc 13.1
- Drop tile/hppa support (dropped upstream)
* Tue Apr 18 2023 Arjun Shankar <arjun@redhat.com> - 12.2.1-6
- Backport upstream patches for improved C99 compatibility
* Tue Jan 24 2023 Michael Brown <mbrown@fensystems.co.uk> - 12.2.1-5
- Enable support for LoongArch64
* Sun Jan 22 2023 Michael Brown <mbrown@fensystems.co.uk> - 12.2.1-4
- Update to match gcc package's 12.2.1-4 release
* Sun Jan 22 2023 Michael Brown <mbrown@fensystems.co.uk> - 12.2.1-3
- Update to match gcc package's 12.2.1-3 release
* Thu Jan 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 12.2.1-2.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
* Sun Jan 01 2023 Dan Horák <dan[at]danny.cz> - 12.2.1-2
- fix the openrisc toolchain triplet to match binutils (rhbz#2096361)
* Tue Aug 30 2022 Dan Horák <dan[at]danny.cz> - 12.2.1-1
- Update to 12.2.1 GA release
- Add Requires for plugin development (rhbz#2121894)
* Wed Jul 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 12.1.1-1.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
* Sat May 07 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 12.1.1-1.2
- Update to 12.1.1 GA release
* Thu Jan 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 11.2.1-1.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
* Sat Jul 31 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 11.2.1-1
- Update to gcc 11.2.1
* Sat Jul 24 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 11.1.1-1
- Update to gcc 11.1.1
- Enable OpenRISC (or1k) support
- Disable sh/crui support
* Wed Jul 21 2021 Fedora Release Engineering <releng@fedoraproject.org> - 10.2.1-3.3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
* Thu Mar 11 2021 Dan Horák <dan[at]danny.cz> - 10.2.1-3.2
- reduce debuginfo verbosity
* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 10.2.1-3.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
* Fri Sep 04 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 10.2.1-3
- GCC 10.2.0 release
* Sat Aug 01 2020 Fedora Release Engineering <releng@fedoraproject.org> - 10.1.1-2.2
- Second attempt - Rebuilt for
https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
* Mon Jul 27 2020 Fedora Release Engineering <releng@fedoraproject.org> - 10.1.1-2.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
* Mon Jul 20 2020 Jeff Law <law@redhat.com> - 10.1.1-2
- Fix broken configure files compromised by LTO
- Add autoconf to BuildRequires
* Fri May 08 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 10.1.1-1
- GCC 10.1.0 release
* Thu Apr 30 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 10.0.1-0.13
- Update to gcc 10 snapshot 0.13
* Tue Jan 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 9.2.1-3.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
* Sat Dec 14 2019 Jeff Law <law@redhat.com> - 9.2.1-3
- Fix unprintable control character in PA backend caught by gcc-10
* Wed Oct 9 2019 Jerry James <loganjerry@gmail.com> - 9.2.1-2
- Rebuild for mpfr 4
* Tue Aug 27 2019 Peter Robinson <pbrobinson@fedoraproject.org> 9.2.1-1
- Sync with gcc-9.2.1-1
* Wed Jul 24 2019 Fedora Release Engineering <releng@fedoraproject.org> - 9.1.1-2.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
* Mon Jun 10 2019 Tom Callaway <spot@fedoraproject.org> - 9.1.1-2
- remove shared support from arm (glibc-arm-linux-gnu is dead)
* Sun May 26 2019 Peter Robinson <pbrobinson@fedoraproject.org> 9.1.1-1
- Sync with gcc-9.1.1-1
* Thu Jan 31 2019 Fedora Release Engineering <releng@fedoraproject.org> - 8.2.1-1.2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
* Wed Nov 7 2018 Tom Callaway <spot@fedoraproject.org> - 8.2.1-1
- update to 8.2.1
* Thu Jul 12 2018 Fedora Release Engineering <releng@fedoraproject.org> - 8.1.1-3.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Thu Jul 12 2018 David Howells <dhowells@redhat.com> - 8.1.1-3
- Change ARC to multilib (#1600183).
- Fix arc700 cpu type (#1600183).
* Wed Jul 11 2018 David Howells <dhowells@redhat.com> - 8.1.1-3
- Switch ARC to arc-linux-gnu and use hs38 not arc700 (#1600183).
* Tue Jul 10 2018 David Howells <dhowells@redhat.com> - 8.1.1-2
- Sync with gcc-8.1.1-4.
- Add support for the ARC arch (#1599744).
* Tue May 29 2018 David Howells <dhowells@redhat.com> - 8.1.1-1
- Sync with gcc-8.1.1-1.
* Fri Mar 30 2018 David Howells <dhowells@redhat.com> - 8.0.1-0.1
- Move to gcc-8 (#1580076).