diff --git a/dhcpd-conf-to-ldap b/dhcpd-conf-to-ldap
deleted file mode 100755
index d68d41a..0000000
--- a/dhcpd-conf-to-ldap
+++ /dev/null
@@ -1,517 +0,0 @@
-#!/usr/bin/perl -w
-
-# Brian Masney <masneyb@ntelos.net>
-# To use this script, set your base DN below. Then run 
-# ./dhcpd-conf-to-ldap.pl < /path-to-dhcpd-conf/dhcpd.conf > output-file
-# The output of this script will generate entries in LDIF format. You can use
-# the slapadd command to add these entries into your LDAP server. You will
-# definately want to double check that your LDAP entries are correct before
-# you load them into LDAP.
-
-# This script does not do much error checking. Make sure before you run this
-# that the DHCP server doesn't give any errors about your config file
-
-use Sys::Hostname;
-
-my $basedn = "dc=ntelos, dc=net";
-
-sub next_token
-{
-  local ($lowercase) = @_;
-  local ($token, $newline);
-
-  do 
-    {
-      if (!defined ($line) || length ($line) == 0)
-        {
-          $line = <>;
-          return undef if !defined ($line);
-          chop $line;
-          $line_number++;
-          $token_number = 0;
-        }
-
-      $line =~ s/#.*//;
-      $line =~ s/^\s+//;
-      $line =~ s/\s+$//;
-    }
-  while (length ($line) == 0);
-
-  if (($token, $newline) = $line =~ /^(.*?)\s+(.*)/)
-    {
-      $line = $newline;
-    }
-  else
-    {
-      $token = $line;
-      $line = '';
-    }
-  $token_number++;
-
-  $token =~ y/[A-Z]/[a-z]/ if $lowercase;
-
-  return ($token);
-}
-
-
-sub remaining_line
-{
-  local ($tmp, $str);
-
-  $str = "";
-  while (($tmp = next_token (0)))
-    {
-      $str .= ' ' if !($str eq "");
-      $str .= $tmp;
-      last if $tmp =~ /;\s*$/;
-    }
-
-  $str =~ s/;$//;
-  return ($str);
-}
-
-
-sub
-add_dn_to_stack
-{
-  local ($dn) = @_;
-
-  $current_dn = "$dn, $current_dn";
-}
-
-
-sub
-remove_dn_from_stack
-{
-  $current_dn =~ s/^.*?,\s*//;
-}
-
-
-sub
-parse_error
-{
-  print "Parse error on line number $line_number at token number $token_number\n";
-  exit (1);
-}
-
-
-sub
-print_entry
-{
-  return if (scalar keys %curentry == 0);
-
-  if (!defined ($curentry{'type'}))
-    {
-      $host = hostname ();
-      $hostdn = "cn=$host, $basedn";
-      print "dn: $hostdn\n";
-      print "objectClass: top\n";
-      print "objectClass: dhcpServer\n";
-      print "cn: $host\n";
-      print "dhcpServiceDN: $current_dn\n\n";
-
-      print "dn: $current_dn\n";
-      print "cn: DHCP Config\n";
-      print "objectClass: top\n";
-      print "objectClass: dhcpService\n";
-      if (defined ($curentry{'options'}))
-        {
-          print "objectClass: dhcpOptions\n";
-        }
-      print "dhcpPrimaryDN: $hostdn\n";
-    }
-  elsif ($curentry{'type'} eq 'subnet')
-    {
-      print "dn: $current_dn\n";
-      print "cn: " . $curentry{'ip'} . "\n";
-      print "objectClass: top\n";
-      print "objectClass: dhcpSubnet\n";
-      if (defined ($curentry{'options'}))
-        {
-          print "objectClass: dhcpOptions\n";
-        }
-      
-      print "dhcpNetMask: " . $curentry{'netmask'} . "\n";
-      if (defined ($curentry{'range'}))
-        {
-          print "dhcpRange: " . $curentry{'range'} . "\n";
-        }
-    }
-  elsif ($curentry{'type'} eq 'shared-network')
-    {
-      print "dn: $current_dn\n";
-      print "cn: " . $curentry{'descr'} . "\n";
-      print "objectClass: top\n";
-      print "objectClass: dhcpSharedNetwork\n";
-      if (defined ($curentry{'options'}))
-        {
-          print "objectClass: dhcpOptions\n";
-        }
-    }
-  elsif ($curentry{'type'} eq 'group')
-    {
-      print "dn: $current_dn\n";
-      print "cn: group\n";
-      print "objectClass: top\n";
-      print "objectClass: dhcpGroup\n";
-      if (defined ($curentry{'options'}))
-        {
-          print "objectClass: dhcpOptions\n";
-        }
-    }
-  elsif ($curentry{'type'} eq 'host')
-    {
-      print "dn: $current_dn\n";
-      print "cn: " . $curentry{'host'} . "\n";
-      print "objectClass: top\n";
-      print "objectClass: dhcpHost\n";
-      if (defined ($curentry{'options'}))
-        {
-          print "objectClass: dhcpOptions\n";
-        }
-
-      if (defined ($curentry{'hwaddress'}))
-        {
-          print "dhcpHWAddress: " . $curentry{'hwaddress'} . "\n";
-        }
-    }
-  elsif ($curentry{'type'} eq 'pool')
-    {
-      print "dn: $current_dn\n";
-      print "cn: pool\n";
-      print "objectClass: top\n";
-      print "objectClass: dhcpPool\n";
-      if (defined ($curentry{'options'}))
-        {
-          print "objectClass: dhcpOptions\n";
-        }
-
-      if (defined ($curentry{'range'}))
-        {
-          print "dhcpRange: " . $curentry{'range'} . "\n";
-        }
-    }
-  elsif ($curentry{'type'} eq 'class')
-    {
-      print "dn: $current_dn\n";
-      print "cn: " . $curentry{'class'} . "\n";
-      print "objectClass: top\n";
-      print "objectClass: dhcpClass\n";
-      if (defined ($curentry{'options'}))
-        {
-          print "objectClass: dhcpOptions\n";
-        }
-    }
-  elsif ($curentry{'type'} eq 'subclass')
-    {
-      print "dn: $current_dn\n";
-      print "cn: " . $curentry{'subclass'} . "\n";
-      print "objectClass: top\n";
-      print "objectClass: dhcpSubClass\n";
-      if (defined ($curentry{'options'}))
-        {
-          print "objectClass: dhcpOptions\n";
-        }
-      print "dhcpClassData: " . $curentry{'class'} . "\n";
-    }
-
-  if (defined ($curentry{'statements'}))
-    {
-      foreach $statement (@{$curentry{'statements'}})
-        {
-          print "dhcpStatements: $statement\n";
-        }
-    }
-
-  if (defined ($curentry{'options'}))
-    {
-      foreach $statement (@{$curentry{'options'}})
-        {
-          print "dhcpOption: $statement\n";
-        }
-    }
-
-  print "\n";
-  undef (%curentry);
-}
-
-
-sub parse_netmask
-{
-  local ($netmask) = @_;
-  local ($i);
-
-  if ((($a, $b, $c, $d) = $netmask =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) != 4)
-    {
-      parse_error ();
-    }
-
-  $num = (($a & 0xff) << 24) |
-         (($b & 0xff) << 16) |
-         (($c & 0xff) << 8) |
-          ($d & 0xff);
-
-  for ($i=1; $i<=32 && $num & (1 << (32 - $i)); $i++)
-    {
-    }
-  $i--;
-
-  return ($i);
-}
-
-
-sub parse_subnet
-{
-  local ($ip, $tmp, $netmask);
-
-  print_entry () if %curentry;
-    
-  $ip = next_token (0);
-  parse_error () if !defined ($ip);
-
-  $tmp = next_token (1);
-  parse_error () if !defined ($tmp);
-  parse_error () if !($tmp eq 'netmask');
-
-  $tmp = next_token (0);
-  parse_error () if !defined ($tmp);
-  $netmask = parse_netmask ($tmp);
-
-  $tmp = next_token (0);
-  parse_error () if !defined ($tmp);
-  parse_error () if !($tmp eq '{');
-
-  add_dn_to_stack ("cn=$ip");
-  $curentry{'type'} = 'subnet';
-  $curentry{'ip'} = $ip;
-  $curentry{'netmask'} = $netmask;
-}
-
-
-sub parse_shared_network
-{
-  local ($descr, $tmp);
-
-  print_entry () if %curentry;
-
-  $descr = next_token (0);
-  parse_error () if !defined ($descr);
-
-  $tmp = next_token (0);
-  parse_error () if !defined ($tmp);
-  parse_error () if !($tmp eq '{');
-
-  add_dn_to_stack ("cn=$descr");
-  $curentry{'type'} = 'shared-network';
-  $curentry{'descr'} = $descr;
-}
-
-
-sub parse_host
-{
-  local ($descr, $tmp);
-
-  print_entry () if %curentry;
-
-  $host = next_token (0);
-  parse_error () if !defined ($host);
-
-  $tmp = next_token (0);
-  parse_error () if !defined ($tmp);
-  parse_error () if !($tmp eq '{');
-
-  add_dn_to_stack ("cn=$host");
-  $curentry{'type'} = 'host';
-  $curentry{'host'} = $host;
-}
-
-
-sub parse_group
-{
-  local ($descr, $tmp);
-
-  print_entry () if %curentry;
-
-  $tmp = next_token (0);
-  parse_error () if !defined ($tmp);
-  parse_error () if !($tmp eq '{');
-
-  add_dn_to_stack ("cn=group");
-  $curentry{'type'} = 'group';
-}
-
-
-sub parse_pool
-{
-  local ($descr, $tmp);
-
-  print_entry () if %curentry;
-
-  $tmp = next_token (0);
-  parse_error () if !defined ($tmp);
-  parse_error () if !($tmp eq '{');
-
-  add_dn_to_stack ("cn=pool");
-  $curentry{'type'} = 'pool';
-}
-
-
-sub parse_class
-{
-  local ($descr, $tmp);
-
-  print_entry () if %curentry;
-
-  $class = next_token (0);
-  parse_error () if !defined ($class);
-
-  $tmp = next_token (0);
-  parse_error () if !defined ($tmp);
-  parse_error () if !($tmp eq '{');
-
-  $class =~ s/\"//g;
-  add_dn_to_stack ("cn=$class");
-  $curentry{'type'} = 'class';
-  $curentry{'class'} = $class;
-}
-
-
-sub parse_subclass
-{
-  local ($descr, $tmp);
-
-  print_entry () if %curentry;
-
-  $class = next_token (0);
-  parse_error () if !defined ($class);
-
-  $subclass = next_token (0);
-  parse_error () if !defined ($subclass);
-
-  $tmp = next_token (0);
-  parse_error () if !defined ($tmp);
-  parse_error () if !($tmp eq '{');
-
-  add_dn_to_stack ("cn=$subclass");
-  $curentry{'type'} = 'subclass';
-  $curentry{'class'} = $class;
-  $curentry{'subclass'} = $subclass;
-}
-
-
-sub parse_hwaddress
-{
-  local ($type, $hw, $tmp);
-
-  $type = next_token (0);
-  parse_error () if !defined ($type);
-
-  $hw = next_token (0);
-  parse_error () if !defined ($hw);
-  $hw =~ s/;$//;
-
-  $curentry{'hwaddress'} = "$type $hw";
-}
-
-    
-sub parse_range
-{
-  local ($tmp, $str);
-
-  $str = remaining_line ();
-
-  if (!($str eq ''))
-    {
-      $str =~ s/;$//;
-      $curentry{'range'} = $str;
-    }
-}
-
-
-sub parse_statement
-{
-  local ($token) = shift;
-  local ($str);
-
-  if ($token eq 'option')
-    {
-      $str = remaining_line ();
-      push (@{$curentry{'options'}}, $str);
-    }
-  else
-    {
-      $str = $token . " " . remaining_line ();
-      push (@{$curentry{'statements'}}, $str);
-    }
-}
-
-
-my $token;
-my $token_number = 0;
-my $line_number = 0;
-my %curentry;
-
-$current_dn = "cn=DHCP Config, $basedn";
-$curentry{'descr'} = 'DHCP Config';
-$line = '';
-
-while (($token = next_token (1)))
-  {
-    if ($token eq '}')
-      {
-        print_entry () if %curentry;
-        remove_dn_from_stack ();
-      }
-    elsif ($token eq 'subnet')
-      {
-        parse_subnet ();
-        next;
-      }
-    elsif ($token eq 'shared-network')
-      {
-        parse_shared_network ();
-        next;
-      }
-    elsif ($token eq 'class')
-      {
-        parse_class ();
-        next;
-      }
-    elsif ($token eq 'subclass')
-      {
-        parse_subclass ();
-        next;
-      }
-    elsif ($token eq 'pool')
-      {
-        parse_pool ();
-        next;
-      }
-    elsif ($token eq 'group')
-      {
-        parse_group ();
-        next;
-      }
-    elsif ($token eq 'host')
-      {
-        parse_host ();
-        next;
-      }
-    elsif ($token eq 'hardware')
-      {
-        parse_hwaddress ();
-        next;
-      }
-    elsif ($token eq 'range')
-      {
-        parse_range ();
-        next;
-      }
-    else
-      {
-        parse_statement ($token);
-        next;
-      }
-  }
-
-
diff --git a/linux b/linux
deleted file mode 100755
index 81b5bd5..0000000
--- a/linux
+++ /dev/null
@@ -1,566 +0,0 @@
-#!/bin/bash
-# dhclient-script for Linux. Dan Halbert, March, 1997.
-# Updated for Linux 2.[12] by Brian J. Murrell, January 1999.
-# No guarantees about this. I'm a novice at the details of Linux
-# networking.
-
-# Notes:
-
-# 0. This script is based on the netbsd script supplied with dhcp-970306.
-
-# 1. ifconfig down apparently deletes all relevant routes and flushes
-# the arp cache, so this doesn't need to be done explicitly.
-
-# 2. The alias address handling here has not been tested AT ALL.
-# I'm just going by the doc of modern Linux ip aliasing, which uses
-# notations like eth0:0, eth0:1, for each alias.
-
-# 3. I have to calculate the network address, and calculate the broadcast
-# address if it is not supplied. This might be much more easily done
-# by the dhclient C code, and passed on.
-
-if [ -n "${dhc_dbus}" ]; then
-   /bin/dbus-send \
-       --system \
-       --dest=com.redhat.dhcp \
-       --type=method_call \
-       /com/redhat/dhcp/$interface \
-       com.redhat.dhcp.set \
-       'string:'"`env | /bin/egrep -v '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`";
-       if (( ( dhc_dbus & 31 ) == 31 )); then
-	   exit 0;
-       fi;
-fi;
-
-function save_previous() {
-  if [ -e $1 ]; then
-    /bin/mv $1 $1.predhclient
-  else
-    echo ''> $1.predhclient 
-  fi
-}
-
-make_resolv_conf() {
-  if [ "${PEERDNS}" == "no" ]; then  
-      return 
-  fi
-
-  if [ x$reason == xRENEW ] &&
-     [ "$new_domain_name" == "$old_domain_name" ] && 
-     [ "$new_domain_name_servers" == "$old_domain_name_servers" ]; then
-      return;
-  fi
-
-  if [ -n "$new_domain_name" ] || [ -n "$new_domain_name_servers" ]; then
-    cp -fp /etc/resolv.conf /etc/resolv.conf.predhclient
-    rscf=`mktemp /tmp/XXXXXX`;
-    echo '; generated by /sbin/dhclient-script' > $rscf
-    if [ -n "$SEARCH" ]; then
- 	echo search $SEARCH >> $rscf
-    else
-	if [ -n "$new_domain_name" ]; then
- 	    echo search $new_domain_name >> $rscf
-        fi
-    fi
-    for nameserver in $new_domain_name_servers; do
-      echo nameserver $nameserver >> $rscf
-    done
-    change_resolv_conf $rscf
-    rm -f $rscf
-  fi
-}
-
-# Must be used on exit.   Invokes the local dhcp client exit hooks, if any.
-exit_with_hooks() {
-  exit_status=$1
-  if [ -f /etc/dhclient-exit-hooks ]; then
-    . /etc/dhclient-exit-hooks
-  fi
-# probably should do something with exit status of the local script
-  exit $exit_status
-}
-
-# Invoke the local dhcp client enter hooks, if they exist.
-if [ -f /etc/dhclient-enter-hooks ]; then
-  exit_status=0
-  . /etc/dhclient-enter-hooks
-  # allow the local script to abort processing of this state
-  # local script must set exit_status variable to nonzero.
-  if [ $exit_status -ne 0 ]; then
-    exit $exit_status
-  fi
-fi
-
-# Import Red Hat Linux configuration
-cd /etc/sysconfig/network-scripts;
-. /etc/sysconfig/network-scripts/network-functions
-. /etc/rc.d/init.d/functions
-
-[ -f ../network ] && . ../network
-[ -f ../networking/network ] && . ../networking/network
-
-CONFIG=$interface
-
-need_config ${CONFIG}
-
-if [ -f "${CONFIG}" ]; then 
-    source_config
-else
-    echo $"$0: configuration for $interface not found. Continuing with defaults." >&2
-fi
-
-source_config
-
-release=`uname -r`
-relmajor=`echo $release |/bin/cut -f1 -d'.'`
-relminor=`echo $release |/bin/cut -f2 -d'.'`
-
-# simple IP arithmetic functions:
-
-function quad2num()
-{
-    if [ $# -eq 4 ]; then
-       let n="$1<<24|$2<<16|$3<<8|$4"
-       echo $n;
-       return 0;
-    fi
-    echo '0';
-    return 1;
-}
-
-function ip2num()
-{
-    IFS='.' quad2num $1;
-}
-
-function num2ip()
-{
-    let n="$1";
-    let o1='(n>>24)&0xff';
-    let o2='(n>>16)&0xff';
-    let o3='(n>>8)&0xff';
-    let o4='n & 0xff';
-    echo $o1.$o2.$o3.$o4;
-}
-
-function mask()
-{   
-    ip=$1
-    m=$2
-    let ip=`IFS='.' ip2num $ip`;
-    let m=`IFS='.' ip2num $m`;
-    let n='ip&m';
-    num2ip $n;
-}
-
-function mask_bits()
-{
-    ip=$1
-    let ip=`IFS='.' ip2num $ip`;
-    let bits=0
-    for ((bit=1; '((ip&bit)==0) && (bits < 32)'; 'bit<<=1')) do
-        let bits+=1
-    done
-    let n_bits=32-bits
-    echo $n_bits
-}
-
-function class_bits()
-{
-    let ip=`IFS='.' ip2num $1`;
-    let bits=32
-    let mask='255';
-    for ((i=0; i <= 3; i++, 'mask<<=8')); do
-	let v='ip&mask';
-	if [ "$v" -eq 0 ] ; then
-	    let bits-=8;
-        else
-            break;
-	fi;
-    done;
-    echo $bits;
-}
-
-function routerReachable()
-{ # Handle silly DHCP servers that give us a router not on our subnet:    
-    router=$1
-    routerSubnet=`mask $router $new_subnet_mask`
-    mySubnet=`mask $new_ip_address $new_subnet_mask`
-    unreachable=0
-    if [ "$routerSubnet" != "$mySubnet" ]; then
-	unreachable=1
-	if /sbin/arping -f -q -I $interface -w2 $router; then
-	    /sbin/ip route add ${router}/32 dev $interface
-	    if [ $? -eq 0 ]; then
-		unreachable=0
-	    else
-		/usr/bin/logger -p local7.notice -t "NET"  "dhclient: failed to create host route for unreachable router $router not on subnet $mySubnet";
-	    fi
-	else
-	    unreachable=1
-	    if [ -x /usr/bin/logger ]; then
-		/usr/bin/logger -p local7.notice -t "NET"  "dhclient: DHCP router $router is unreachable on DHCP subnet $mySubnet router subnet $routerSubnet";
-	    fi;
-	fi;
-    fi;
-    return $unreachable;
-}
-
-function add_default_gateway()
-{
-    router=$1
-    metric=''
-    if [ $# -gt 1 ] && [ "$2" -gt 0 ]; then 
-	metric="metric $2";
-    fi;    
-    if routerReachable $router ; then
-	/sbin/ip route replace default via $router dev $interface $metric;
-	if [ $? -ne 0 ]; then 
-	    /usr/bin/logger -p local7.notice -t "NET"  'dhclient: failed to create default route: '$router dev $interface $metric;
-	    return 1;
-	else
-	    return 0;
-	fi;
-    fi;
-    return 1;
-}
-
-function dhconfig()
-{
-    if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-	if [ x$old_ip_address != x ] && [ x$alias_ip_address != x ] && \
-		[ x$alias_ip_address != x$old_ip_address ]; then
-         # Possible new alias. Remove old alias.
-	    ifconfig $interface:0- inet 0
-	fi
-
-	if [ x$old_ip_address != x ] && [ x$old_ip_address != x$new_ip_address ]; then
-        # IP address changed. Bringing down the interface will delete all routes,
-        # and clear the ARP cache.
-	    ifconfig $interface inet 0 down
-	fi
-    fi
-    if [ x$reason = xBOUND ] || [ x$reason = xREBOOT ] ||
-       [ x$old_ip_address  != x$new_ip_address ] ||
-       [ x$old_subnet_mask != x$new_subnet_mask ] ||
-       [ x$new_network_number != x$new_network_number ] ||
-       [ x$old_broadcast_address != x$new_broadcast_address ] ||
-       [ "x$old_routers" != "x$new_routers" ] ||
-       [ x$old_interface_mtu != x$new_interface_mtu ] ; then
-	if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-	    ifconfig $interface inet $new_ip_address $new_subnet_arg \
-		$new_broadcast_arg
-	    if [ -n "$new_interface_mtu" ]; then
-		/sbin/ip link set $interface mtu $new_interface_mtu;
-	    fi;
-	    if [ -x /etc/dhclient-${interface}-up-hooks ]; then
-		. /etc/dhclient-${interface}-up-hooks;
-	    elif [ -x /etc/dhclient-up-hooks ]; then
-		. /etc/dhclient-up-hooks;
-	    fi;
-	fi;
-	
-	if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 4 ) != 4 )); then
-	    prefix_bits=`mask_bits $new_subnet_mask`
-            # Add a network route to the computed network address.
-	    if [ $relmajor -lt 2 ] || \
-		( [ $relmajor -eq 2 ] && [ $relminor -eq 0 ] ); then
-		/sbin/ip route replace ${new_network_number}/${prefix_bits} dev $interface
-		if [ $added_old_broadcast_route -eq 1 ]; then
-		   /sbin/ip route del default;
-		fi;
-	    fi;
-	    if [[  ( ( -z "$GATEWAYDEV" )  || ( "$GATEWAYDEV" = "$interface" ) ) && ( ( -z "$GATEWAY" )  || ( ( -n "$DHCLIENT_IGNORE_GATEWAY" ) && ( "$DHCLIENT_IGNORE_GATEWAY" = [Yy]* ) ) ) ]]; then
-		metric=${METRIC:-''};
-		let i=${METRIC:-0};
-		default_routers=()
-		for router in $new_routers; do
-		    added_router=0
-		    for r in ${default_routers[@]}; do
-			if [ "$r" == "$router" ]; then
-			    added_router=1;
-                        fi;
-		    done
-		    if [ -z "$router" ] || [ "$added_router" -eq 1 ] || [ `IFS=. ip2num $router` -le 0 ] || [[ ( "$router" = "$new_broadcast_address" ) && ( "$new_subnet_mask" != "255.255.255.255" ) ]]; then
-			continue;
-		    fi;
-		    default_routers=(${default_routers[@]} $router)
-		    add_default_gateway $router $metric;		    
-		    let i=i+1;
-		    metric=$i; 
-		done
-	    elif [[ ( ( -z "$GATEWAYDEV" ) || ( "$GATEWAYDEV" = "$interface" ) ) && ( -n "$GATEWAY" ) ]]; then
-		routerSubnet=`mask $GATEWAY $new_subnet_mask`
-		mySubnet=`mask $new_ip_address $new_subnet_mask`
-		if [ "$routerSubnet" = "$mySubnet" ]; then
-		    /sbin/ip route replace default via $GATEWAY dev $interface 
-		fi;
-	    fi;
-            # static routes
-	    if [ "x$new_static_routes" != x ]; then
-		IFS=', 	' static_routes=($new_static_routes)
-		route_targets=()
-		for((i=0; i<${#static_routes[@]}; i+=2)); do
-		    target=${static_routes[$i]}
-		    gateway=${static_routes[$i+1]}
-		    metric=''
-		    for t in ${route_targets[@]}; do
-			if [ $t == $target ]; then
-			    if [ -z "$metric" ]; then
-				metric=1;
-			    else
-				((metric=metric+1));
-			    fi;
-			fi;
-		    done;
-		    if [ -n "$metric" ]; then
-			metric="metric $metric";
-		    fi;		    
-		    if routerReachable $gateway; then
-			/sbin/ip route replace ${target}/`class_bits $target` via ${gateway} dev $interface ${metric}
-			if [ $? -ne 0 ]; then
-			   /usr/bin/logger -p local7.notice -t 'NET' 'dhclient: failed to create static route:' ${target}/`class_bits $target` via ${gateway} dev $interface ${metric};			
-			else			    
- 			   route_targets=(${route_targets[@]} $target);
-			fi;
-		    fi;
-		done
-	    fi
-	fi
-    fi
-    if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-	if [ x$new_ip_address != x$alias_ip_address ] && [ x$alias_ip_address != x ];
-	    then
-	    ifconfig $interface:0- inet 0
-	    ifconfig $interface:0 inet $alias_ip_address $alias_subnet_arg
-	    /sbin/ip route replace ${alias_ip_address}/32 dev $interface:0
-	fi
-    fi
-    if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 1 ) != 1 )); then
-	make_resolv_conf
-
-	if [ -n "$new_host_name" ] && need_hostname; then
-	    hostname $new_host_name
-	fi
-    fi;
-    if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 8 ) != 8 )); then
-	if [ "${PEERNIS}" = no ]; then
-	    :
-	elif [ -n "$new_nis_domain" ]; then
-	    domainname "$new_nis_domain"
-	    save_previous /etc/yp.conf
-	    let contents=0
-	    echo '# generated by /sbin/dhclient-script' > /etc/yp.conf
-	    if [ -n "$new_nis_servers" ]; then
-		for I in $new_nis_servers; do
-		    echo "domain $new_nis_domain server $I" >> /etc/yp.conf
-		    let contents=contents+1
-		done
-	    else
-		echo "domain $new_nis_domain broadcast" >> /etc/yp.conf
-		let contents=contents+1
-	    fi
-	    level=`/sbin/runlevel`
-	    level=${level##*\ }
-	    if [ "$level" = "unknown" ]; then
-		level=1;
-	    fi
-	    if [ $contents -gt 0 ] && [[ "$level" = [0-6] ]] && /sbin/chkconfig --level=$level ypbind >/dev/null 2>&1 && [ -r /var/run/ypbind.pid ] && yppid=`cat /var/run/ypbind.pid` && [ -d /proc/${yppid} ] && [ "`if [ -x /sbin/busybox ]; then /sbin/busybox readlink /proc/${yppid}/exe; else echo /sbin/ypbind; fi`" = "/sbin/ypbind" ]; then
-	       kill -HUP $yppid;
-	    fi
-	elif [ -n "$new_nis_servers" ]; then
-	    save_previous /etc/yp.conf
-	    echo '# generated by /sbin/dhclient-script' > /etc/yp.conf
-	    let contents=0
-	    for I in $new_nis_servers; do
-		echo "ypserver $I" >> /etc/yp.conf
-		let contents=contents+1
-	    done
-	    level=`/sbin/runlevel`
-	    level=${level##*\ }
-	    if [ "$level" = "unknown" ]; then
-		level=1;
-	    fi
-	    if [ $contents -gt 0 ] && [[ "$level" = [0-6] ]] && /sbin/chkconfig --level=$level ypbind >/dev/null 2>&1 && [ -r /var/run/ypbind.pid ] && yppid=`cat /var/run/ypbind.pid` && [ -d /proc/${yppid} ] && [ "`if [ -x /sbin/busybox ]; then /sbin/busybox readlink /proc/${yppid}/exe; else echo /sbin/ypbind; fi`" = "/sbin/ypbind" ] ; then
-	       kill -HUP $yppid;
-	    fi
-	fi
-    fi
-    if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 16 ) != 16 )); then
-	if [ -n "$DHCP_TIME_OFFSET_SETS_TIMEZONE" ] && [[ "$DHCP_TIME_OFFSET_SETS_TIMEZONE" = [yY1]* ]]; then
-	    if [ -n "$new_time_offset" ]; then
-	    #   DHCP option "time-offset" is requested by default and should be handled.
-	    #   The geographical zone abbreviation cannot be determined from the GMT offset,
-	    #   but the $ZONEINFO/Etc/GMT$offset file can be used - note: this disables DST.
-		((z=new_time_offset/3600));
-		((hoursWest=`printf '%+d' $z`))
-		if (( $hoursWest < 0 )); then
-		   # tzdata treats negative 'hours west' as positive 'gmtoff' !
-		   ((hoursWest*=-1));
-		fi
-		tzfile=/usr/share/zoneinfo/Etc/GMT`printf '%+d' $hoursWest`;
-		if [ -e $tzfile ]; then
-		    /bin/mv -f /etc/localtime /etc/localtime.predhclient;
-		    /bin/cp -fp $tzfile /etc/localtime;
-		    /bin/touch /etc/localtime;
-		fi;
-	    fi;
-	fi;
-	if [ "${PEERNTP}" = no ]; then
-	    :
-	elif [ -n "$new_ntp_servers" ] && [ -e /etc/ntp.conf ]; then
-	    save_previous /etc/ntp.conf
-	    /bin/egrep -v '(^[\ \	]*(server|fudge))|(generated by /sbin/dhclient-script)'< /etc/ntp.conf.predhclient > /etc/ntp.conf
-	    echo '# servers generated by /sbin/dhclient-script' >> /etc/ntp.conf
-	    localClocks=(`/bin/egrep '^[\ \	]*server[\ \	]+127\.127' /etc/ntp.conf.predhclient | while read s addr rest; do echo $addr; done`)      
-	    localClockFudge="`/bin/egrep '^[\ \	]*fudge[\ \	]+127\.127' /etc/ntp.conf.predhclient`";
-	    for s in $new_ntp_servers ${localClocks[@]};
-	      do
-	      echo 'server '$s >> /etc/ntp.conf;
-	    done
-	    echo "$localClockFudge" >> /etc/ntp.conf;
-	    if [ -x /usr/bin/diff ] && /usr/bin/diff -q /etc/ntp.conf /etc/ntp.conf.predhclient >/dev/null 2>&1; then
-		: ;
-	    else
-		/sbin/service ntpd condrestart >/dev/null 2>&1
-	    fi;
-	fi
-    fi;
-}
-
-if [ x$new_broadcast_address != x ] && [ x$new_subnet_mask != x ] && [ "$new_subnet_mask" != "255.255.255.255" ]; then
-  new_broadcast_arg="broadcast $new_broadcast_address"
-fi
-if [ x$old_broadcast_address != x ]; then
-  old_broadcast_arg="broadcast $old_broadcast_address"
-fi
-if [ x$new_subnet_mask != x ]; then
-  new_subnet_arg="netmask $new_subnet_mask"
-fi
-if [ x$old_subnet_mask != x ]; then
-  old_subnet_arg="netmask $old_subnet_mask"
-fi
-if [ x$alias_subnet_mask != x ]; then
-  alias_subnet_arg="netmask $alias_subnet_mask"
-fi
-
-if [ x$reason = xMEDIUM ]; then
-  # Linux doesn't do mediums (ok, ok, media).
-  exit_with_hooks 0
-fi
-
-added_old_broadcast_route=0;
-if [ x$reason = xPREINIT ]; then
-    if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-	if [ x$alias_ip_address != x ]; then
-    # Bring down alias interface. Its routes will disappear too.
-	    ifconfig $interface:0- inet 0
-	fi
-	if [ x$keep_old_ip = xyes ]; then
-	    ifconfig $interface up
-	elif [ $relmajor -lt 2 ] || ( [ $relmajor -eq 2 ] && [ $relminor -eq 0 ] )   then
-	    ifconfig $interface inet 0.0.0.0 netmask 0.0.0.0 \
-		broadcast 255.255.255.255 up
-    # Add route to make broadcast work. Do not omit netmask.
-	    /sbin/ip route replace default dev $interface && added_old_broadcast_route=1;
-	else
-	    ifconfig $interface 0 up
-	fi     
-
-  # We need to give the kernel some time to get the interface up.
-  #	sleep 1
-  # I don't think this is necessary with modern kernels - no problems found during testing -
-  # JVD, 2005-06-17
-	# but just in case:
-	if [ -n "$DHCLIENT_DELAY" ] && [ "$DHCLIENT_DELAY" -gt 0 ] ; then
-	    sleep $DHCLIENT_DELAY;
-	fi;
-	exit_with_hooks 0
-    fi;
-fi
-
-if [ x$reason = xARPCHECK ] || [ x$reason = xARPSEND ]; then
-    if [ -z "$new_ip_address" ] || [ -z "$interface" ] ||  /sbin/arping -q -f -c 2 -w 3 -D -I ${interface} ${new_ip_address}; then
-	exit_with_hooks 0
-    else
-	exit_with_hooks 1
-    fi;
-fi
-  
-if [ x$reason = xBOUND ] || [ x$reason = xRENEW ] || \
-   [ x$reason = xREBIND ] || [ x$reason = xREBOOT ]; then    
-    dhconfig ;
-    exit_with_hooks 0
-fi
-
-if [ x$reason = xEXPIRE ] || [ x$reason = xFAIL ] || [ x$reason = xRELEASE ] \
-   || [ x$reason = xSTOP ]; then
-  if [ -f /etc/resolv.conf.predhclient ]; then
-     change_resolv_conf /etc/resolv.conf.predhclient
-     rm -f /etc/resolv.conf.predhclient
-  fi
-  if [ -n "$DHCP_TIME_OFFSET_SETS_TIMEZONE" ] && [[ "$DHCP_TIME_OFFSET_SETS_TIMEZONE" = [yY1]* ]]; then
-      if [ -e /etc/localtime.predhclient ]; then
-	  /bin/rm -f /etc/localtime
-	  /bin/mv -f /etc/localtime.predhclient /etc/localtime;
-	  /bin/touch /etc/localtime;
-      fi;
-  fi;
-  if [ -f /etc/ntp.conf.predhclient ]; then
-     /bin/rm -f /etc/ntp.conf
-     /bin/mv -f /etc/ntp.conf.predhclient /etc/ntp.conf
-     service ntpd condrestart >/dev/null 2>&1 
-  fi
-  if [ -f /etc/yp.conf.predhclient ]; then
-     /bin/rm -f /etc/yp.conf
-     /bin/mv -f /etc/yp.conf.predhclient /etc/yp.conf
-     level=`/sbin/runlevel`
-     level=${level##*\ }
-     if [ "$level" = "unknown" ]; then
-	 level=1;
-     fi
-     if [[ "$level" = [0-6] ]] && /sbin/chkconfig --level=$level ypbind >/dev/null 2>&1 && [ -r /var/run/ypbind.pid ] && yppid=`cat /var/run/ypbind.pid` && [ -d /proc/${yppid} ] && [ "`if [ -x /sbin/busybox ]; then /sbin/busybox readlink /proc/${yppid}/exe; else echo /sbin/ypbind; fi`" = "/sbin/ypbind" ] ; then
-	 kill -HUP $yppid;
-     fi
-  fi 
-  if [ -x /etc/dhclient-${interface}-down-hooks ]; then
-      . /etc/dhclient-${interface}-down-hooks;
-  elif [ -x /etc/dhclient-down-hooks ]; then
-      . /etc/dhclient-down-hooks;
-  fi;
-  if [ x$alias_ip_address != x ]; then
-    # Turn off alias interface.
-    ifconfig $interface:0- inet 0
-  fi
-  if [ x$old_ip_address != x ]; then
-    # Shut down interface, which will delete routes and clear arp cache.
-    ifconfig $interface inet 0 down
-  fi
-  if [ x$alias_ip_address != x ]; then
-    ifconfig $interface:0 inet $alias_ip_address $alias_subnet_arg
-    /sbin/ip route replace ${alias_ip_address}/32 $interface:0
-  fi
-  exit_with_hooks 0
-fi
-
-if [ x$reason = xTIMEOUT ] && [ "x$new_routers" != 'x' ]; then
-    if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-	if [ x$alias_ip_address != x ]; then
-	    ifconfig $interface:0- inet 0
-	fi
-	ifconfig $interface inet $new_ip_address $new_subnet_arg \
-					$new_broadcast_arg
-    fi;
-    set $new_routers
-    if ping -q -c 1 -w 10 -I $interface $1; then
-	dhconfig ;
-	exit_with_hooks 0
-    fi
-    if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-	ifconfig $interface inet 0 down
-    fi;
-    exit_with_hooks 1
-elif [ x$reason = xTIMEOUT ]; then
-  exit_with_hooks 1
-fi
-exit_with_hooks 0
diff --git a/linux.dbus-example b/linux.dbus-example
deleted file mode 100755
index 1ee9e0d..0000000
--- a/linux.dbus-example
+++ /dev/null
@@ -1,223 +0,0 @@
-#!/bin/bash
-# dhclient-script for Linux. Dan Halbert, March, 1997.
-# Updated for Linux 2.[12] by Brian J. Murrell, January 1999.
-# No guarantees about this. I'm a novice at the details of Linux
-# networking.
-
-# Notes:
-
-# 0. This script is based on the netbsd script supplied with dhcp-970306.
-
-# 1. ifconfig down apparently deletes all relevant routes and flushes
-# the arp cache, so this doesn't need to be done explicitly.
-
-# 2. The alias address handling here has not been tested AT ALL.
-# I'm just going by the doc of modern Linux ip aliasing, which uses
-# notations like eth0:0, eth0:1, for each alias.
-
-# 3. I have to calculate the network address, and calculate the broadcast
-# address if it is not supplied. This might be much more easily done
-# by the dhclient C code, and passed on.
-
-# 4. TIMEOUT not tested. ping has a flag I don't know, and I'm suspicious
-# of the $1 in its args.
-
-if [ -n "${dhc_dbus}" ]; then
-  /bin/dbus-send \
-    --system --dest=com.redhat.dhcp --type=method_call \
-    /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-    'string:'"`env | /bin/egrep -v '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`";
-    if (( ( dhc_dbus & 31 ) == 31 )); then
-    exit 0;
-    fi;
-fi;
-
-make_resolv_conf() {
-  if [ "x$new_domain_name" != x ] && [ x"$new_domain_name_servers" != x ]; then
-    echo search $new_domain_name >/etc/resolv.conf
-    chmod 644 /etc/resolv.conf
-    for nameserver in $new_domain_name_servers; do
-      echo nameserver $nameserver >>/etc/resolv.conf
-    done
-  fi
-}
-
-# Must be used on exit.   Invokes the local dhcp client exit hooks, if any.
-exit_with_hooks() {
-  exit_status=$1
-  if [ -f /etc/dhclient-exit-hooks ]; then
-    . /etc/dhclient-exit-hooks
-  fi
-# probably should do something with exit status of the local script
-  exit $exit_status
-}
-
-# Invoke the local dhcp client enter hooks, if they exist.
-if [ -f /etc/dhclient-enter-hooks ]; then
-  exit_status=0
-  . /etc/dhclient-enter-hooks
-  # allow the local script to abort processing of this state
-  # local script must set exit_status variable to nonzero.
-  if [ $exit_status -ne 0 ]; then
-    exit $exit_status
-  fi
-fi
-
-release=`uname -r`
-release=`expr $release : '\(.*\)\..*'`
-relminor=`echo $release |sed -e 's/[0-9]*\.\([0-9][0-9]*\)\(\..*\)*$/\1/'`
-relmajor=`echo $release |sed -e 's/\([0-9][0-9]*\)\..*$/\1/'`
-
-if [ x$new_broadcast_address != x ]; then
-  new_broadcast_arg="broadcast $new_broadcast_address"
-fi
-if [ x$old_broadcast_address != x ]; then
-  old_broadcast_arg="broadcast $old_broadcast_address"
-fi
-if [ x$new_subnet_mask != x ]; then
-  new_subnet_arg="netmask $new_subnet_mask"
-fi
-if [ x$old_subnet_mask != x ]; then
-  old_subnet_arg="netmask $old_subnet_mask"
-fi
-if [ x$alias_subnet_mask != x ]; then
-  alias_subnet_arg="netmask $alias_subnet_mask"
-fi
-
-if [ x$reason = xMEDIUM ]; then
-  # Linux doesn't do mediums (ok, ok, media).
-  exit_with_hooks 0
-fi
-
-if [ x$reason = xPREINIT ]; then
-  if [ x$alias_ip_address != x ]; then
-    # Bring down alias interface. Its routes will disappear too.
-    ifconfig $interface:0- inet 0
-  fi
-  if [ $relmajor -lt 2 ] || ( [ $relmajor -eq 2 ] && [ $relminor -eq 0 ] )
-   then
-    ifconfig $interface inet 0.0.0.0 netmask 0.0.0.0 \
-		broadcast 255.255.255.255 up
-    # Add route to make broadcast work. Do not omit netmask.
-    route add default dev $interface netmask 0.0.0.0
-  else
-    ifconfig $interface 0 up
-  fi
-
-  # We need to give the kernel some time to get the interface up.
-  sleep 1
-
-  exit_with_hooks 0
-fi
-
-if [ x$reason = xARPCHECK ] || [ x$reason = xARPSEND ]; then
-  exit_with_hooks 0
-fi
-  
-if [ x$reason = xBOUND ] || [ x$reason = xRENEW ] || \
-   [ x$reason = xREBIND ] || [ x$reason = xREBOOT ]; then
-  current_hostname=`hostname`
-  if [ x$current_hostname = x ] || \
-     [ x$current_hostname = x$old_host_name ]; then
-    if [ x$current_hostname = x ] || \
-       [ x$new_host_name != x$old_host_name ]; then
-      hostname $new_host_name
-    fi
-  fi
-
-  if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-  if [ x$old_ip_address != x ] && [ x$alias_ip_address != x ] && \
-		[ x$alias_ip_address != x$old_ip_address ]; then
-    # Possible new alias. Remove old alias.
-    ifconfig $interface:0- inet 0
-  fi
-  if [ x$old_ip_address != x ] && [ x$old_ip_address != x$new_ip_address ]; then
-    # IP address changed. Bringing down the interface will delete all routes,
-    # and clear the ARP cache.
-    ifconfig $interface inet 0 down
-
-  fi
-  fi
-  if [ x$old_ip_address = x ] || [ x$old_ip_address != x$new_ip_address ] || \
-     [ x$reason = xBOUND ] || [ x$reason = xREBOOT ]; then
-  if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-    ifconfig $interface inet $new_ip_address $new_subnet_arg \
-							$new_broadcast_arg
-  fi
-  if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 4 ) != 4 )); then
-    # Add a network route to the computed network address.
-    if [ $relmajor -lt 2 ] || \
-		( [ $relmajor -eq 2 ] && [ $relminor -eq 0 ] ); then
-      route add -net $new_network_number $new_subnet_arg dev $interface
-    fi
-    for router in $new_routers; do
-      route add default gw $router
-    done
-  fi
-  fi
-  if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-  if [ x$new_ip_address != x$alias_ip_address ] && [ x$alias_ip_address != x ];
-   then
-    ifconfig $interface:0- inet 0
-    ifconfig $interface:0 inet $alias_ip_address $alias_subnet_arg
-    route add -host $alias_ip_address $interface:0
-  fi
-  fi
-  if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 1 ) != 1 )); then
-  make_resolv_conf
-  fi
-  exit_with_hooks 0
-fi
-
-if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-if [ x$reason = xEXPIRE ] || [ x$reason = xFAIL ] || [ x$reason = xRELEASE ] \
-   || [ x$reason = xSTOP ]; then
-  if [ x$alias_ip_address != x ]; then
-    # Turn off alias interface.
-    ifconfig $interface:0- inet 0
-  fi
-  if [ x$old_ip_address != x ]; then
-    # Shut down interface, which will delete routes and clear arp cache.
-    ifconfig $interface inet 0 down
-  fi
-  if [ x$alias_ip_address != x ]; then
-    ifconfig $interface:0 inet $alias_ip_address $alias_subnet_arg
-    route add -host $alias_ip_address $interface:0
-  fi
-  exit_with_hooks 0
-fi
-fi
-
-if [ x$reason = xTIMEOUT ]; then
-  if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-  if [ x$alias_ip_address != x ]; then
-    ifconfig $interface:0- inet 0
-  fi
-  ifconfig $interface inet $new_ip_address $new_subnet_arg \
-					$new_broadcast_arg
-  fi
-  set $new_routers
-  ############## what is -w in ping?
-  if ping -q -c 1 $1; then
-    if [ x$new_ip_address != x$alias_ip_address ] && \
-			[ x$alias_ip_address != x ]; then
-      ifconfig $interface:0 inet $alias_ip_address $alias_subnet_arg
-      route add -host $alias_ip_address dev $interface:0
-    fi
-    if [ $relmajor -lt 2 ] || \
-		( [ $relmajor -eq 2 ] && [ $relminor -eq 0 ] ); then
-      route add -net $new_network_number
-    fi
-    for router in $new_routers; do
-      route add default gw $router
-    done
-    make_resolv_conf
-    exit_with_hooks 0
-  fi
-  if [ -z "${dhc_dbus}" ] || (( ( dhc_dbus & 2 ) != 2 )); then
-  ifconfig $interface inet 0 down
-  fi
-  exit_with_hooks 1
-fi
-
-exit_with_hooks 0