diff --git a/glibc.spec b/glibc.spec index 95b62a8..06dc884 100644 --- a/glibc.spec +++ b/glibc.spec @@ -1,6 +1,6 @@ %define glibcsrcdir glibc-2.27.9000-568-g93304f5f7a %define glibcversion 2.27.9000 -%define glibcrelease 39%{?dist} +%define glibcrelease 40%{?dist} # Pre-release tarballs are pulled in from git using a command that is # effectively: # @@ -1219,7 +1219,7 @@ done ############################################################################## # There are several main file lists (and many more for # the langpack sub-packages (langpack-${lang}.filelist)): -# * rpm.filelist +# * master.filelist # - Master file list from which all other lists are built. # * glibc.filelist # - Files for the glibc packages. @@ -1251,7 +1251,7 @@ done # Create the main file lists. This way we can append to any one of them later # wihtout having to create it. Note these are removed at the start of the # install phase. -touch rpm.filelist +touch master.filelist touch glibc.filelist touch common.filelist touch utils.filelist @@ -1304,13 +1304,17 @@ touch debuginfocommon.filelist -e '\,.*/etc/\(localtime\|nsswitch.conf\|ld\.so\.conf\|ld\.so\.cache\|default\|rpc\|gai\.conf\),d' \ -e '\,.*/%{_libdir}/lib\(pcprofile\|memusage\)\.so,d' \ -e '\,.*/bin/\(memusage\|mtrace\|xtrace\|pcprofiledump\),d' -} | sort > rpm.filelist +} | sort > master.filelist # The master file list is now used by each subpackage to list their own # files. We go through each package and subpackage now and create their lists. # Each subpackage picks the files from the master list that they need. # The order of the subpackage list generation does not matter. +# Make the master file list read-only after this point to avoid accidental +# modification. +chmod 0444 master.filelist + ############################################################################### # glibc ############################################################################### @@ -1326,7 +1330,7 @@ touch debuginfocommon.filelist # - All bench test binaries. # - The aux-cache, since it's handled specially in the files section. # - The build-locale-archive binary since it's in the common package. -cat rpm.filelist \ +cat master.filelist \ | grep -v \ -e '%{_infodir}' \ -e '%{_libdir}/lib.*_p.a' \ @@ -1351,12 +1355,12 @@ cat rpm.filelist \ # - The nss_files, nss_compat, and nss_db files. # - The libmemusage.so and libpcprofile.so used by utils. for module in compat files dns; do - cat rpm.filelist \ + cat master.filelist \ | grep -E \ -e "/libnss_$module(\.so\.[0-9.]+|-[0-9.]+\.so)$" \ >> glibc.filelist done -grep -e "libmemusage.so" -e "libpcprofile.so" rpm.filelist >> glibc.filelist +grep -e "libmemusage.so" -e "libpcprofile.so" master.filelist >> glibc.filelist ############################################################################### # glibc-devel @@ -1364,18 +1368,18 @@ grep -e "libmemusage.so" -e "libpcprofile.so" rpm.filelist >> glibc.filelist %if %{with docs} # Put the info files into the devel file list, but exclude the generated dir. -grep '%{_infodir}' rpm.filelist | grep -v '%{_infodir}/dir' > devel.filelist +grep '%{_infodir}' master.filelist | grep -v '%{_infodir}/dir' > devel.filelist %endif # Put some static files into the devel package. -grep '%{_libdir}/lib.*\.a' rpm.filelist \ +grep '%{_libdir}/lib.*\.a' master.filelist \ | grep '/lib\(\(c\|pthread\|nldbl\|mvec\)_nonshared\|g\|ieee\|mcheck\)\.a$' \ >> devel.filelist # Put all of the object files and *.so (not the versioned ones) into the # devel package. -grep '%{_libdir}/.*\.o' < rpm.filelist >> devel.filelist -grep '%{_libdir}/lib.*\.so' < rpm.filelist >> devel.filelist +grep '%{_libdir}/.*\.o' < master.filelist >> devel.filelist +grep '%{_libdir}/lib.*\.so' < master.filelist >> devel.filelist # The exceptions are: # - libmemusage.so and libpcprofile.so in glibc used by utils. # - libnss_*.so which are in nss-devel. @@ -1392,10 +1396,10 @@ sed -i -e '\,libmemusage.so,d' \ # across all multilib packages. We must keep gnu/stubs.h and gnu/lib-names.h # in the glibc-headers package, but the -32, -64, -64-v1, and -64-v2 versions # go into the development packages. -grep '%{_prefix}/include/gnu/stubs-.*\.h$' < rpm.filelist >> devel.filelist || : -grep '%{_prefix}/include/gnu/lib-names-.*\.h$' < rpm.filelist >> devel.filelist || : +grep '%{_prefix}/include/gnu/stubs-.*\.h$' < master.filelist >> devel.filelist || : +grep '%{_prefix}/include/gnu/lib-names-.*\.h$' < master.filelist >> devel.filelist || : # Put the include files into headers file list. -grep '%{_prefix}/include' < rpm.filelist \ +grep '%{_prefix}/include' < master.filelist \ | egrep -v '%{_prefix}/include/gnu/stubs-.*\.h$' \ | egrep -v '%{_prefix}/include/gnu/lib-names-.*\.h$' \ > headers.filelist @@ -1405,7 +1409,7 @@ grep '%{_prefix}/include' < rpm.filelist \ ############################################################################### # Put the rest of the static files into the static package. -grep '%{_libdir}/lib.*\.a' < rpm.filelist \ +grep '%{_libdir}/lib.*\.a' < master.filelist \ | grep -v '/lib\(\(c\|pthread\|nldbl\|mvec\)_nonshared\|g\|ieee\|mcheck\)\.a$' \ > static.filelist @@ -1416,15 +1420,15 @@ grep '%{_libdir}/lib.*\.a' < rpm.filelist \ # All of the bin and certain sbin files go into the common package except # glibc_post_upgrade.* and iconvconfig which need to go in glibc. Likewise # nscd is excluded because it goes in nscd. -grep '%{_prefix}/bin' rpm.filelist >> common.filelist -grep '%{_prefix}/sbin/[^gi]' rpm.filelist \ +grep '%{_prefix}/bin' master.filelist >> common.filelist +grep '%{_prefix}/sbin/[^gi]' master.filelist \ | grep -v 'nscd' >> common.filelist # All of the files under share go into the common package since they should be # multilib-independent. # Exceptions: # - The actual share directory, not owned by us. # - The info files which go in devel, and the info directory. -grep '%{_prefix}/share' rpm.filelist \ +grep '%{_prefix}/share' master.filelist \ | grep -v \ -e '%{_prefix}/share/info/libc.info.*' \ -e '%%dir %{prefix}/share/info' \ @@ -1464,7 +1468,7 @@ EOF # to pick up .debug files, and the -devel symbolic links. for module in db hesiod; do grep -E "/libnss_$module(\.so\.[0-9.]+|-[0-9.]+\.so)$" \ - rpm.filelist > nss_$module.filelist + master.filelist > nss_$module.filelist done ############################################################################### @@ -1473,14 +1477,14 @@ done # Symlinks go into the nss-devel package (instead of the main devel # package). -grep '/libnss_[a-z]*\.so$' rpm.filelist > nss-devel.filelist +grep '/libnss_[a-z]*\.so$' master.filelist > nss-devel.filelist ############################################################################### # libnsl ############################################################################### # Prepare the libnsl-related file lists. -grep '/libnsl-[0-9.]*.so$' rpm.filelist > libnsl.filelist +grep '/libnsl-[0-9.]*.so$' master.filelist > libnsl.filelist test $(wc -l < libnsl.filelist) -eq 1 ############################################################################### @@ -1501,7 +1505,6 @@ echo "%{_prefix}/libexec/glibc-benchtests/compare_bench.py*" >> benchtests.filel echo "%{_prefix}/libexec/glibc-benchtests/import_bench.py*" >> benchtests.filelist echo "%{_prefix}/libexec/glibc-benchtests/validate_benchout.py*" >> benchtests.filelist %endif -sed -i -e '\,glibc-benchtests,d' rpm.filelist ############################################################################### # glibc-debuginfocommon, and glibc-debuginfo @@ -1770,7 +1773,7 @@ if test $1 = 0; then fi %systemd_postun_with_restart nscd.service -%files -f rpm.filelist +%files -f glibc.filelist %dir %{_prefix}/%{_lib}/audit %if %{buildpower9} %dir /%{_lib}/power9 @@ -1862,6 +1865,9 @@ fi %endif %changelog +* Fri Jul 13 2018 Carlos O'Donell - 2.27.9000-40 +- Fix file list for glibc RPM packaging (#1601011). + * Wed Jul 11 2018 Florian Weimer - 2.27.9000-39 - Add POWER9 multilib (downstream only)