diff -Naur i2c-tools-3.1.0.orig/eepromer/eeprog.8 i2c-tools-3.1.0/eepromer/eeprog.8

--- i2c-tools-3.1.0.orig/eepromer/eeprog.8	1970-01-01 01:00:00.000000000 +0100

+++ i2c-tools-3.1.0/eepromer/eeprog.8	2013-07-03 17:10:46.193787836 +0200

@@ -0,0 +1,105 @@

+.\"

+.\"  eeprog.8 - manpage for the i2c-tools/eeprog utility

+.\"  Copyright (C) 2013  Jaromir Capik

+.\"

+.\"  This program is free software; you can redistribute it and/or modify

+.\"  it under the terms of the GNU General Public License as published by

+.\"  the Free Software Foundation; either version 2 of the License, or

+.\"  (at your option) any later version.

+.\"

+.\"  This program is distributed in the hope that it will be useful,

+.\"  but WITHOUT ANY WARRANTY; without even the implied warranty of

+.\"  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+.\"  GNU General Public License for more details.

+.\"

+.\"  You should have received a copy of the GNU General Public License along

+.\"  with this program; if not, write to the Free Software Foundation, Inc.,

+.\"  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

+.\"

+.TH eeprog "8" "Jul 2013" "i2c-tools" "System Administration"

+.SH NAME

+eeprog \- reads and writes 24Cxx EEPROMs connected to I2C serial bus.

+.SH SYNOPSIS

+.B eeprog

+[-fqxdh] [-16|-8] [-r addr[:count]|-w addr] <device> <i2c-addr>

+.SH DESCRIPTION

+.B eeprog

+uses the SMBus protocol used by most of the recent chipsets.

+.SH NOTE

+Don't forget to load your i2c chipset and the i2c-dev drivers.

+.P

+The following environment variables could be set instead of the command line arguments:

+.P

+    EEPROG_DEV              device

+.br

+    EEPROG_I2C_ADDR         i2c-addr

+.SH PARAMETERS

+.I Address modes

+.TP

+.B \-8

+Use 8bit address mode for 24c0x...24C16 [default]

+.TP

+.B \-16

+Use 16bit address mode for 24c32...24C256

+.TP

+.I Actions

+.TP

+.B \-r addr[:count]

+Read

+.B count

+(1 if omitted) bytes from

+.B addr

+and print them to the standard output

+.TP

+.B \-w addr

+Write input (stdin) at address

+.B addr

+of the EEPROM

+.TP

+.B \-h

+Print this help

+.TP

+.I Options

+.TP

+.B \-x

+Set hex output mode

+.TP

+.B \-d

+Dummy mode, display what *would* have been done

+.TP

+.B \-f

+Disable warnings and don't ask confirmation

+.TP

+.B \-q

+Quiet mode

+.TP

+.I Bus

+.TP

+.B device

+Device file representing the I2C bus (eg. /dev/i2c-0)

+.TP

+.B i2c-addr

+I2C bus address of the EEPROM (eg. 0x3A)

+.SH EXAMPLES

+Read 64 bytes from the EEPROM at address 0x54 on bus 0 starting at address 123 (decimal)

+.P

+.B 	eeprog

+/dev/i2c-0 0x54 -r 123:64

+.P

+Print the hex codes of the first 32 bytes read from bus 1 at address 0x22

+.P

+.B 	eeprog

+/dev/i2c-1 0x51 -x -r 0x22:0x20

+.P

+Write the current timestamp at address 0x200 of the EEPROM on bus 0 at address 0x33

+.P

+ 	date |

+.B eeprog

+/dev/i2c-0 0x33 -w 0x200

+.SH SEE ALSO

+.BR eeprom (8)

+.BR eepromer (8)

+.SH AUTHOR

+.UR stefano@codesink.org

+Stefano Barbato

+.UE

diff -Naur i2c-tools-3.1.0.orig/eepromer/eepromer.8 i2c-tools-3.1.0/eepromer/eepromer.8

--- i2c-tools-3.1.0.orig/eepromer/eepromer.8	1970-01-01 01:00:00.000000000 +0100

+++ i2c-tools-3.1.0/eepromer/eepromer.8	2013-07-03 17:25:35.067487324 +0200

@@ -0,0 +1,63 @@

+.\"

+.\"  eeprom.8 - manpage for the i2c-tools/eeprom utility

+.\"  Copyright (C) 2013  Jaromir Capik

+.\"

+.\"  This program is free software; you can redistribute it and/or modify

+.\"  it under the terms of the GNU General Public License as published by

+.\"  the Free Software Foundation; either version 2 of the License, or

+.\"  (at your option) any later version.

+.\"

+.\"  This program is distributed in the hope that it will be useful,

+.\"  but WITHOUT ANY WARRANTY; without even the implied warranty of

+.\"  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+.\"  GNU General Public License for more details.

+.\"

+.\"  You should have received a copy of the GNU General Public License along

+.\"  with this program; if not, write to the Free Software Foundation, Inc.,

+.\"  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

+.\"

+.TH eepromer "8" "Jul 2013" "i2c-tools" "System Administration"

+.SH NAME

+eepromer \- reads and writes 24Cxx EEPROMs connected to I2C serial bus.

+.SH SYNOPSIS

+.B eepromer

+[-r|-w|-e|-p] -f <device> <i2c-addr>

+.SH DESCRIPTION

+The EEPROM must be a large EEPROM which uses a 2-byte address

+field (24C32 or larger). It will NOT WORK on small EEPROMs

+(24C01 - 24C16) such as those used on SDRAM DIMMs.

+.SH NOTE

+Don't forget to load your i2c chipset and the i2c-dev drivers.

+.P

+Tested only on 24C256.

+.P

+.SH PARAMETERS

+.TP

+.I Actions

+.TP

+.B \-r

+Read

+.TP

+.B \-w

+Write

+.TP

+.B \-e

+Erase

+.TP

+.B \-p

+Print header

+.TP

+.I Bus

+.TP

+.B \-f device

+Device file representing the I2C bus (eg. /dev/i2c-0)

+.TP

+.B i2c-addr

+I2C bus address of the EEPROM (eg. 0x3A)

+.SH SEE ALSO

+.BR eeprog (8)

+.BR eeprom (8)

+.SH AUTHOR

+.UR marvin@sitour.cz

+Daniel Smolik

+.UE

diff -Naur i2c-tools-3.1.0.orig/eepromer/eeprom.8 i2c-tools-3.1.0/eepromer/eeprom.8

--- i2c-tools-3.1.0.orig/eepromer/eeprom.8	1970-01-01 01:00:00.000000000 +0100

+++ i2c-tools-3.1.0/eepromer/eeprom.8	2013-07-03 17:14:22.852383941 +0200

@@ -0,0 +1,64 @@

+.\"

+.\"  eeprom.8 - manpage for the i2c-tools/eeprom utility

+.\"  Copyright (C) 2013  Jaromir Capik

+.\"

+.\"  This program is free software; you can redistribute it and/or modify

+.\"  it under the terms of the GNU General Public License as published by

+.\"  the Free Software Foundation; either version 2 of the License, or

+.\"  (at your option) any later version.

+.\"

+.\"  This program is distributed in the hope that it will be useful,

+.\"  but WITHOUT ANY WARRANTY; without even the implied warranty of

+.\"  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+.\"  GNU General Public License for more details.

+.\"

+.\"  You should have received a copy of the GNU General Public License along

+.\"  with this program; if not, write to the Free Software Foundation, Inc.,

+.\"  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

+.\"

+.TH eeprom "8" "Jul 2013" "i2c-tools" "System Administration"

+.SH NAME

+eeprom \- reads and writes 24Cxx EEPROMs connected to I2C serial bus.

+.SH SYNOPSIS

+.B eeprom

+[-d dev] [-a adr] [-p pgs] [-w] [-y] [-f file]

+.SH DESCRIPTION

+.B eeprom

+can be used for reading from / writing to i2c-eeproms like the popular

+24C16, 24C08, 24C04, etc.

+In contrast to eeprommer which supports 24C256-type eeproms (24C16s)

+this tool works with 1-byte addresses!

+.SH NOTE

+Don't forget to load your i2c chipset and the i2c-dev drivers.

+.P

+Pages/addresses:

+    eeproms with more than 256 bytes appear as if they

+    were several eeproms with consecutive addresses on the bus

+    so we might as well address several separate eeproms with

+    increasing addresses

+.SH PARAMETERS

+.TP

+.B dev

+device, e.g. /dev/i2c-0    (def)

+.TP

+.B adr

+base address of eeprom, eg 0xA0 (def)

+.TP

+.B pgs

+number of pages to read, eg 8 (def)

+.TP

+.B \-w

+write to eeprom (default is reading!)

+.TP

+.B \-y

+suppress warning when writing (default is to warn!)

+.TP

+.B \-f file

+copy eeprom contents to/from file (default for read is test only; for write is all zeros)

+.SH SEE ALSO

+.BR eeprog (8)

+.BR eepromer (8)

+.SH AUTHOR

+.UR chris@hedonism.cx

+Christian Vogel

+.UE

diff -Naur i2c-tools-3.1.0.orig/tools/i2cset.c i2c-tools-3.1.0/tools/i2cset.c

--- i2c-tools-3.1.0.orig/tools/i2cset.c	2011-02-15 17:12:27.000000000 +0100

+++ i2c-tools-3.1.0/tools/i2cset.c	2013-06-19 12:45:55.852490195 +0200

@@ -35,7 +35,12 @@

 static void help(void)

 {

 	fprintf(stderr,

-		"Usage: i2cset [-f] [-y] [-m MASK] I2CBUS CHIP-ADDRESS DATA-ADDRESS [VALUE] ... [MODE]\n"

+		"Usage: i2cset [OPTIONS] I2CBUS CHIP-ADDRESS DATA-ADDRESS [VALUE] ... [MODE]\n"

+		"  OPTIONS are\n"

+		"    -f (force access when busy)\n"

+		"    -y (disable interactive mode)\n"

+		"    -m MASK (value write mask - bits set to 0 are preserved if possible)\n"

+		"    -r (write verification by reading back)\n"

 		"  I2CBUS is an integer or an I2C bus name\n"

 		"  ADDRESS is an integer (0x03 - 0x77)\n"

 		"  MODE is one of:\n"