diff -aurp open-iscsi-2.0-868-test1/etc/iscsid.conf open-iscsi-2.0-868-test1.tmp/etc/iscsid.conf
--- open-iscsi-2.0-868-test1/etc/iscsid.conf 2008-01-03 13:23:36.000000000 -0600
+++ open-iscsi-2.0-868-test1.tmp/etc/iscsid.conf 2008-01-03 13:55:59.000000000 -0600
@@ -27,8 +20,8 @@
# To request that the iscsi initd scripts startup a session set to "automatic".
# node.startup = automatic
#
-# To manually startup the session set to "manual". The default is manual.
-node.startup = manual
+# To manually startup the session set to "manual". The default is automatic.
+node.startup = automatic
# *************
# CHAP Settings
@@ -92,17 +85,6 @@ node.conn[0].timeo.noop_out_interval = 5
# this will cause the IO to be failed to the multipath layer.
node.conn[0].timeo.noop_out_timeout = 5
-# To specify the time to wait for abort response before
-# failing the operation and trying a logical unit reset edit the line.
-# The value is in seconds and the default is 15 seconds.
-node.session.err_timeo.abort_timeout = 15
-
-# To specify the time to wait for a logical unit response
-# before failing the operation and trying session re-establishment
-# edit the line.
-# The value is in seconds and the default is 30 seconds.
-node.session.err_timeo.lu_reset_timeout = 20
-
#******
# Retry
#******
@@ -188,41 +170,24 @@ node.conn[0].iscsi.MaxRecvDataSegmentLen
discovery.sendtargets.iscsi.MaxRecvDataSegmentLength = 32768
# To allow the targets to control the setting of the digest checking,
-# with the initiator requesting a preference of enabling the checking, uncomment# one or both of the following lines:
+# with the initiator requesting a preference of enabling the checking, uncommen
+# the following lines (Data digests are not supported and on ppc/ppc64
+# both header and data digests are not supported.):
#node.conn[0].iscsi.HeaderDigest = CRC32C,None
-#node.conn[0].iscsi.DataDigest = CRC32C,None
#
# To allow the targets to control the setting of the digest checking,
# with the initiator requesting a preference of disabling the checking,
-# uncomment one or both of the following lines:
+# uncomment the following lines:
#node.conn[0].iscsi.HeaderDigest = None,CRC32C
-#node.conn[0].iscsi.DataDigest = None,CRC32C
#
# To enable CRC32C digest checking for the header and/or data part of
-# iSCSI PDUs, uncomment one or both of the following lines:
+# iSCSI PDUs, uncomment the following lines:
#node.conn[0].iscsi.HeaderDigest = CRC32C
-#node.conn[0].iscsi.DataDigest = CRC32C
#
# To disable digest checking for the header and/or data part of
-# iSCSI PDUs, uncomment one or both of the following lines:
+# iSCSI PDUs, uncomment the following lines:
#node.conn[0].iscsi.HeaderDigest = None
-#node.conn[0].iscsi.DataDigest = None
#
# The default is to never use DataDigests and to allow the target to control
# the setting of the HeaderDigest checking with the initiator requesting
# a preference of disabling the checking.
-
-#************
-# Workarounds
-#************
-
-# Some targets like IET prefer after an initiator has sent a task
-# management function like an ABORT TASK or LOGICAL UNIT RESET, that
-# it does not respond to PDUs like R2Ts. To enable this behavior uncomment
-# the following line (The default behavior is Yes):
-node.session.iscsi.FastAbort = Yes
-
-# Some targets like Equalogic prefer that after an initiator has sent
-# a task management function like an ABORT TASK or LOGICAL UNIT RESET, that
-# it continue to respond to R2Ts. To enable this uncomment this line
-# node.session.iscsi.FastAbort = No
diff -aurp open-iscsi-2.0-868-test1/README open-iscsi-2.0-868-test1.tmp/README
--- open-iscsi-2.0-868-test1/README 2008-01-03 13:23:36.000000000 -0600
+++ open-iscsi-2.0-868-test1.tmp/README 2008-01-03 13:53:11.000000000 -0600
@@ -78,11 +78,6 @@ the cache sync command will fail.
- iscsiadm's -P 3 option will not print out scsi devices.
- iscsid will not automatically online devices.
-You need to enable "Cryptographic API" under "Cryptographic options" in the
-kernel config. And you must enable "CRC32c CRC algorithm" even if
-you do not use header or data digests. They are the kernel options,
-CONFIG_CRYPTO and CONFIG_CRYPTO_CRC32C, respectively.
-
By default the kernel source found at
/lib/modules/`uname -a`/build
will be used to compile the open-iscsi modules. To specify a different
@@ -613,7 +608,7 @@ Red Hat or Fedora:
-----------------
To start open-iscsi in Red Hat/Fedora you can do:
- service open-iscsi start
+ service iscsi start
To get open-iscsi to automatically start at run time you may have to
run:
@@ -792,6 +778,8 @@ To login to all the automated nodes, sim
e.g /etc/init.d/open-iscsi restart. On your next startup the nodes will
be logged into autmotically.
+To set the startup value, so that nodes are not logged into automatically
+use the value "manual".
8. Advanced Configuration
=========================
diff -aurp open-iscsi-2.0-868-test1/usr/idbm.c open-iscsi-2.0-868-test1.tmp/usr/idbm.c
--- open-iscsi-2.0-868-test1/usr/idbm.c 2008-01-03 13:23:36.000000000 -0600
+++ open-iscsi-2.0-868-test1.tmp/usr/idbm.c 2008-01-03 13:52:01.000000000 -0600
@@ -364,10 +364,14 @@ idbm_recinfo_node(node_rec_t *r, recinfo
__recinfo_int_o4(key, ri, r, conn[i].iscsi.HeaderDigest,
IDBM_SHOW, "None", "CRC32C", "CRC32C,None",
"None,CRC32C", num);
+/*
+ We only support data digests
+
sprintf(key, "node.conn[%d].iscsi.DataDigest", i);
__recinfo_int_o4(key, ri, r, conn[i].iscsi.DataDigest, IDBM_SHOW,
"None", "CRC32C", "CRC32C,None",
"None,CRC32C", num);
+*/
sprintf(key, "node.conn[%d].iscsi.IFMarker", i);
__recinfo_int_o2(key, ri, r, conn[i].iscsi.IFMarker, IDBM_SHOW,
"No", "Yes", num);