# We have to override the new %%install behavior because, well... the kernel is special.

%global __spec_install_pre %{___build_pre}

Summary: The Linux kernel

# For a stable, released kernel, released_kernel should be 1. For rawhide

# and/or a kernel built from an rc or git snapshot, released_kernel should

# be 0.

%global released_kernel 0

# Save original buildid for later if it's defined

%if 0%{?buildid:1}

%global orig_buildid %{buildid}

%undefine buildid

%endif

###################################################################

# Polite request for people who spin their own kernel rpms:

# please modify the "buildid" define in a way that identifies

# that the kernel isn't the stock distribution kernel, for example,

# by setting the define to ".local" or ".bz123456". This will be

# appended to the full kernel version.

#

# (Uncomment the '#' and both spaces below to set the buildid.)

#

# % define buildid .local

###################################################################

# The buildid can also be specified on the rpmbuild command line

# by adding --define="buildid .whatever". If both the specfile and

# the environment define a buildid they will be concatenated together.

%if 0%{?orig_buildid:1}

%if 0%{?buildid:1}

%global srpm_buildid %{buildid}

%define buildid %{srpm_buildid}%{orig_buildid}

%else

%define buildid %{orig_buildid}

%endif

%endif

# baserelease defines which build revision of this kernel version we're

# building.  We used to call this fedora_build, but the magical name

# baserelease is matched by the rpmdev-bumpspec tool, which you should use.

#

# We used to have some extra magic weirdness to bump this automatically,

# but now we don't.  Just use: rpmdev-bumpspec -c 'comment for changelog'

# When changing base_sublevel below or going from rc to a final kernel,

# reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec).

# scripts/rebase.sh should be made to do that for you, actually.

#

# For non-released -rc kernels, this will be prepended with "0.", so

# for example a 3 here will become 0.3

#

%global baserelease 40

%global fedora_build %{baserelease}

# base_sublevel is the kernel version we're starting with and patching

# on top of -- for example, 2.6.22-rc7-git1 starts with a 2.6.21 base,

# which yields a base_sublevel of 21.

%define base_sublevel 35

## If this is a released kernel ##

%if 0%{?released_kernel}

# Do we have a -stable update to apply?

%define stable_update 0

# Is it a -stable RC?

%define stable_rc 0

# Set rpm version accordingly

%if 0%{?stable_update}

%define stablerev .%{stable_update}

%define stable_base %{stable_update}

%if 0%{?stable_rc}

# stable RCs are incremental patches, so we need the previous stable patch

%define stable_base %(echo $((%{stable_update} - 1)))

%endif

%endif

%define rpmversion 2.6.%{base_sublevel}%{?stablerev}

## The not-released-kernel case ##

%else

# The next upstream release sublevel (base_sublevel+1)

%define upstream_sublevel %(echo $((%{base_sublevel} + 1)))

# The rc snapshot level

%define rcrev 8

# The git snapshot level

%define gitrev 0

# Set rpm version accordingly

%define rpmversion 2.6.%{upstream_sublevel}

%endif

# Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below.

# What parts do we want to build?  We must build at least one kernel.

# These are the kernels that are built IF the architecture allows it.

# All should default to 1 (enabled) and be flipped to 0 (disabled)

# by later arch-specific checks.

# The following build options are enabled by default.

# Use either --without <opt> in your rpmbuild command or force values

# to 0 in here to disable them.

#

# standard kernel

%define with_up        %{?_without_up:        0} %{?!_without_up:        1}

# kernel-smp (only valid for ppc 32-bit)

%define with_smp       %{?_without_smp:       0} %{?!_without_smp:       1}

# kernel-debug

%define with_debug     %{?_without_debug:     0} %{?!_without_debug:     1}

# kernel-doc

%define with_doc       %{?_without_doc:       0} %{?!_without_doc:       1}

# kernel-headers

%define with_headers   %{?_without_headers:   0} %{?!_without_headers:   1}

# kernel-firmware

%define with_firmware  %{?_with_firmware:     1} %{?!_with_firmware:     0}

# tools/perf

%define with_perf      %{?_without_perf:      0} %{?!_without_perf:      1}

# kernel-debuginfo

%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}

# kernel-bootwrapper (for creating zImages from kernel + initrd)

%define with_bootwrapper %{?_without_bootwrapper: 0} %{?!_without_bootwrapper: 1}

# Want to build a the vsdo directories installed

%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}

# Build the kernel-doc package, but don't fail the build if it botches.

# Here "true" means "continue" and "false" means "fail the build".

%if 0%{?released_kernel}

%define doc_build_fail false

%else

%define doc_build_fail true

%endif

%define rawhide_skip_docs 1

%if 0%{?rawhide_skip_docs}

%define with_doc 0

%define doc_build_fail true

%endif

# Additional options for user-friendly one-off kernel building:

#

# Only build the base kernel (--with baseonly):

%define with_baseonly  %{?_with_baseonly:     1} %{?!_with_baseonly:     0}

# Only build the smp kernel (--with smponly):

%define with_smponly   %{?_with_smponly:      1} %{?!_with_smponly:      0}

# Only build the debug kernel (--with dbgonly):

%define with_dbgonly   %{?_with_dbgonly:      1} %{?!_with_dbgonly:      0}

# should we do C=1 builds with sparse

%define with_sparse	%{?_with_sparse:      1} %{?!_with_sparse:      0}

# Set debugbuildsenabled to 1 for production (build separate debug kernels)

#  and 0 for rawhide (all kernels are debug kernels).

# See also 'make debug' and 'make release'.

%define debugbuildsenabled 0

# Want to build a vanilla kernel build without any non-upstream patches?

%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}

# pkg_release is what we'll fill in for the rpm Release: field

%if 0%{?released_kernel}

%if 0%{?stable_rc}

%define stable_rctag .rc%{stable_rc}

%endif

%define pkg_release %{fedora_build}%{?stable_rctag}%{?buildid}%{?dist}

%else

# non-released_kernel

%if 0%{?rcrev}

%define rctag .rc%rcrev

%else

%define rctag .rc0

%endif

%if 0%{?gitrev}

%define gittag .git%gitrev

%else

%define gittag .git0

%endif

%define pkg_release 0.%{fedora_build}%{?rctag}%{?gittag}%{?buildid}%{?dist}

%endif

# The kernel tarball/base version

%define kversion 2.6.%{base_sublevel}

%define make_target bzImage

%define KVERREL %{version}-%{release}.%{_target_cpu}

%define hdrarch %_target_cpu

%define asmarch %_target_cpu

%if 0%{!?nopatches:1}

%define nopatches 0

%endif

%if %{with_vanilla}

%define nopatches 1

%endif

%if %{nopatches}

%define with_bootwrapper 0

%define variant -vanilla

%else

%define variant_fedora -fedora

%endif

%define using_upstream_branch 0

%if 0%{?upstream_branch:1}

%define stable_update 0

%define using_upstream_branch 1

%define variant -%{upstream_branch}%{?variant_fedora}

%define pkg_release 0.%{fedora_build}%{upstream_branch_tag}%{?buildid}%{?dist}

%endif

%if !%{debugbuildsenabled}

%define with_debug 0

%endif

%if !%{with_debuginfo}

%define _enable_debug_packages 0

%endif

%define debuginfodir /usr/lib/debug

# kernel-PAE is only built on i686.

%ifarch i686

%define with_pae 1

%else

%define with_pae 0

%endif

# if requested, only build base kernel

%if %{with_baseonly}

%define with_smp 0

%define with_debug 0

%endif

# if requested, only build smp kernel

%if %{with_smponly}

%define with_up 0

%define with_debug 0

%endif

# if requested, only build debug kernel

%if %{with_dbgonly}

%if %{debugbuildsenabled}

%define with_up 0

%endif

%define with_smp 0

%define with_pae 0

%define with_perf 0

%endif

%define all_x86 i386 i686

%if %{with_vdso_install}

# These arches install vdso/ directories.

%define vdso_arches %{all_x86} x86_64 ppc ppc64

%endif

# Overrides for generic default options

# only ppc and alphav56 need separate smp kernels

%ifnarch ppc alphaev56

%define with_smp 0

%endif

# don't do debug builds on anything but i686 and x86_64

%ifnarch i686 x86_64

%define with_debug 0

%endif

# only package docs noarch

%ifnarch noarch

%define with_doc 0

%endif

# don't build noarch kernels or headers (duh)

%ifarch noarch

%define with_up 0

%define with_headers 0

%define with_perf 0

%define all_arch_configs kernel-%{version}-*.config

%define with_firmware  %{?_with_firmware:     1} %{?!_with_firmware:     0}

%endif

# bootwrapper is only on ppc

%ifnarch ppc ppc64

%define with_bootwrapper 0

%endif

# sparse blows up on ppc64 alpha and sparc64

%ifarch ppc64 ppc alpha sparc64

%define with_sparse 0

%endif

# Per-arch tweaks

%ifarch %{all_x86}

%define asmarch x86

%define hdrarch i386

%define all_arch_configs kernel-%{version}-i?86*.config

%define image_install_path boot

%define kernel_image arch/x86/boot/bzImage

%endif

%ifarch x86_64

%define asmarch x86

%define all_arch_configs kernel-%{version}-x86_64*.config

%define image_install_path boot

%define kernel_image arch/x86/boot/bzImage

%endif

%ifarch ppc64

%define asmarch powerpc

%define hdrarch powerpc

%define all_arch_configs kernel-%{version}-ppc64*.config

%define image_install_path boot

%define make_target vmlinux

%define kernel_image vmlinux

%define kernel_image_elf 1

%endif

%ifarch s390x

%define asmarch s390

%define hdrarch s390

%define all_arch_configs kernel-%{version}-s390x.config

%define image_install_path boot

%define make_target image

%define kernel_image arch/s390/boot/image

%endif

%ifarch sparc64

%define asmarch sparc

%define all_arch_configs kernel-%{version}-sparc64*.config

%define make_target image

%define kernel_image arch/sparc/boot/image

%define image_install_path boot

%define with_perf 0

%endif

%ifarch ppc

%define asmarch powerpc

%define hdrarch powerpc

%define all_arch_configs kernel-%{version}-ppc{-,.}*config

%define image_install_path boot

%define make_target vmlinux

%define kernel_image vmlinux

%define kernel_image_elf 1

%endif

%ifarch ia64

%define all_arch_configs kernel-%{version}-ia64*.config

%define image_install_path boot/efi/EFI/redhat

%define make_target compressed

%define kernel_image vmlinux.gz

%endif

%ifarch alpha alphaev56

%define all_arch_configs kernel-%{version}-alpha*.config

%define image_install_path boot

%define make_target vmlinux

%define kernel_image vmlinux

%endif

%ifarch %{arm}

%define all_arch_configs kernel-%{version}-arm*.config

%define image_install_path boot

%define hdrarch arm

%define make_target vmlinux

%define kernel_image vmlinux

%endif

%if %{nopatches}

# XXX temporary until last vdso patches are upstream

%define vdso_arches ppc ppc64

%endif

# Should make listnewconfig fail if there's config options

# printed out?

%if %{nopatches}%{using_upstream_branch}

%define listnewconfig_fail 0

%else

%define listnewconfig_fail 1

%endif

# To temporarily exclude an architecture from being built, add it to

# %nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we

# don't build kernel-headers then the new build system will no longer let

# us use the previous build of that package -- it'll just be completely AWOL.

# Which is a BadThing(tm).

# We only build kernel-headers on the following...

%define nobuildarches i386 s390 sparc %{arm}

%ifarch %nobuildarches

%define with_up 0

%define with_smp 0

%define with_pae 0

%define with_debuginfo 0

%define with_perf 0

%define _enable_debug_packages 0

%endif

%define with_pae_debug 0

%if %{with_pae}

%define with_pae_debug %{with_debug}

%endif

#

# Three sets of minimum package version requirements in the form of Conflicts:

# to versions below the minimum

#

#

# First the general kernel 2.6 required versions as per

# Documentation/Changes

#

%define kernel_dot_org_conflicts  ppp < 2.4.3-3, isdn4k-utils < 3.2-32, nfs-utils < 1.0.7-12, e2fsprogs < 1.37-4, util-linux < 2.12, jfsutils < 1.1.7-2, reiserfs-utils < 3.6.19-2, xfsprogs < 2.6.13-4, procps < 3.2.5-6.3, oprofile < 0.9.1-2

#

# Then a series of requirements that are distribution specific, either

# because we add patches for something, or the older versions have

# problems with the newer kernel or lack certain things that make

# integration in the distro harder than needed.

#

%define package_conflicts initscripts < 7.23, udev < 063-6, iptables < 1.3.2-1, ipw2200-firmware < 2.4, iwl4965-firmware < 228.57.2, selinux-policy-targeted < 1.25.3-14, squashfs-tools < 4.0, wireless-tools < 29-3

# We moved the drm include files into kernel-headers, make sure there's

# a recent enough libdrm-devel on the system that doesn't have those.

%define kernel_headers_conflicts libdrm-devel < 2.4.0-0.15

#

# Packages that need to be installed before the kernel is, because the %post

# scripts use them.

#

%define kernel_prereq  fileutils, module-init-tools, initscripts >= 8.11.1-1, grubby >= 7.0.10-1

%define initrd_prereq  dracut >= 001-7

#

# This macro does requires, provides, conflicts, obsoletes for a kernel package.

#	%%kernel_reqprovconf <subpackage>

# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes

# macros defined above.

#

%define kernel_reqprovconf \

Provides: kernel = %{rpmversion}-%{pkg_release}\

Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:.%{1}}\

Provides: kernel-drm = 4.3.0\

Provides: kernel-drm-nouveau = 16\

Provides: kernel-modeset = 1\

Provides: kernel-uname-r = %{KVERREL}%{?1:.%{1}}\

Requires(pre): %{kernel_prereq}\

Requires(pre): %{initrd_prereq}\

%if %{with_firmware}\

Requires(pre): kernel-firmware >= %{rpmversion}-%{pkg_release}\

%else\

Requires(pre): linux-firmware >= 20100806-2\

%endif\

Requires(post): /sbin/new-kernel-pkg\

Requires(preun): /sbin/new-kernel-pkg\

Conflicts: %{kernel_dot_org_conflicts}\

Conflicts: %{package_conflicts}\

%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\

%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\

%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\

# We can't let RPM do the dependencies automatic because it'll then pick up\

# a correct but undesirable perl dependency from the module headers which\

# isn't required for the kernel proper to function\

AutoReq: no\

AutoProv: yes\

%{nil}

Name: kernel%{?variant}

Group: System Environment/Kernel

License: GPLv2

URL: http://www.kernel.org/

Version: %{rpmversion}

Release: %{pkg_release}

# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.

# SET %%nobuildarches (ABOVE) INSTEAD

ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 ia64 sparc sparc64 s390 s390x alpha alphaev56 %{arm}

ExclusiveOS: Linux

%kernel_reqprovconf

%ifarch x86_64 sparc64

Obsoletes: kernel-smp

%endif

#

# List the packages used during the kernel build

#

BuildRequires: module-init-tools, patch >= 2.5.4, bash >= 2.03, sh-utils, tar

BuildRequires: bzip2, findutils, gzip, m4, perl, make >= 3.78, diffutils, gawk

BuildRequires: gcc >= 3.4.2, binutils >= 2.12, redhat-rpm-config

BuildRequires: net-tools

BuildRequires: xmlto, asciidoc

%if %{with_sparse}

BuildRequires: sparse >= 0.4.1

%endif

%if %{with_perf}

BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed)

%endif

BuildConflicts: rhbuildsys(DiskFree) < 500Mb

%define fancy_debuginfo 0

%if %{with_debuginfo}

%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6

%define fancy_debuginfo 1

%endif

%endif

%if %{fancy_debuginfo}

# Fancy new debuginfo generation introduced in Fedora 8.

BuildRequires: rpm-build >= 4.4.2.1-4

%define debuginfo_args --strict-build-id

%endif

Source0: ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-%{kversion}.tar.bz2

Source11: genkey

Source14: find-provides

Source15: merge.pl

Source20: Makefile.config

Source21: config-debug

Source22: config-nodebug

Source23: config-generic

Source24: config-rhel-generic

Source30: config-x86-generic

Source31: config-i686-PAE

Source40: config-x86_64-generic

Source50: config-powerpc-generic

Source51: config-powerpc32-generic

Source52: config-powerpc32-smp

Source53: config-powerpc64

Source60: config-ia64-generic

Source70: config-s390x

Source90: config-sparc64-generic

Source100: config-arm

# Here should be only the patches up to the upstream canonical Linus tree.

# For a stable release kernel

%if 0%{?stable_update}

%if 0%{?stable_base}

%define    stable_patch_00  patch-2.6.%{base_sublevel}.%{stable_base}.bz2

Patch00: %{stable_patch_00}

%endif

%if 0%{?stable_rc}

%define    stable_patch_01  patch-2.6.%{base_sublevel}.%{stable_update}-rc%{stable_rc}.bz2

Patch01: %{stable_patch_01}

%endif

# non-released_kernel case

# These are automagically defined by the rcrev and gitrev values set up

# near the top of this spec file.

%else

%if 0%{?rcrev}

Patch00: patch-2.6.%{upstream_sublevel}-rc%{rcrev}.bz2

%if 0%{?gitrev}

Patch01: patch-2.6.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.bz2

%endif

%else

# pre-{base_sublevel+1}-rc1 case

%if 0%{?gitrev}

Patch00: patch-2.6.%{base_sublevel}-git%{gitrev}.bz2

%endif

%endif

%endif

%if %{using_upstream_branch}

### BRANCH PATCH ###

%endif

Patch02: git-linus.diff

# we also need compile fixes for -vanilla

Patch04: linux-2.6-compile-fixes.patch

# build tweak for build ID magic, even for -vanilla

Patch05: linux-2.6-makefile-after_link.patch

%if !%{nopatches}

# revert upstream patches we get via other methods

Patch09: linux-2.6-upstream-reverts.patch

# Git trees.

# Standalone patches

Patch20: linux-2.6-hotfixes.patch

Patch30: linux-2.6-tracehook.patch

Patch31: linux-2.6-utrace.patch

Patch32: linux-2.6-utrace-ptrace.patch

Patch150: linux-2.6.29-sparc-IOC_TYPECHECK.patch

Patch160: linux-2.6-32bit-mmap-exec-randomization.patch

Patch161: linux-2.6-i386-nx-emulation.patch

Patch200: linux-2.6-debug-sizeof-structs.patch

Patch201: linux-2.6-debug-nmi-timeout.patch

Patch202: linux-2.6-debug-taint-vm.patch

Patch203: linux-2.6-debug-vm-would-have-oomkilled.patch

Patch204: linux-2.6-debug-always-inline-kzalloc.patch

Patch380: linux-2.6-defaults-pci_no_msi.patch

Patch381: linux-2.6-defaults-pci_use_crs.patch

Patch383: linux-2.6-defaults-aspm.patch

Patch385: ima-allow-it-to-be-completely-disabled-and-default-off.patch

Patch390: linux-2.6-defaults-acpi-video.patch

Patch391: linux-2.6-acpi-video-dos.patch

Patch393: acpi-ec-add-delay-before-write.patch

Patch394: linux-2.6-acpi-debug-infinite-loop.patch

Patch395: acpi-update-battery-information-on-notification-0x81.patch

Patch450: linux-2.6-input-kill-stupid-messages.patch

Patch452: linux-2.6.30-no-pcspkr-modalias.patch

Patch454: thinkpad-acpi-fix-backlight.patch

Patch460: linux-2.6-serial-460800.patch

Patch470: die-floppy-die.patch

Patch510: linux-2.6-silence-noise.patch

Patch530: linux-2.6-silence-fbcon-logo.patch

Patch570: linux-2.6-selinux-mprotect-checks.patch

Patch580: linux-2.6-sparc-selinux-mprotect-checks.patch

Patch610: hda_intel-prealloc-4mb-dmabuffer.patch

Patch700: linux-2.6-e1000-ich9-montevina.patch

Patch800: linux-2.6-crash-driver.patch

# crypto/

# virt + ksm patches

Patch1555: fix_xen_guest_on_old_EC2.patch

# DRM

# nouveau + drm fixes

Patch1810: drm-nouveau-updates.patch

Patch1819: drm-intel-big-hammer.patch

# intel drm is all merged upstream

Patch1824: drm-intel-next.patch

# make sure the lvds comes back on lid open

Patch1825: drm-intel-make-lvds-work.patch

Patch1900: linux-2.6-intel-iommu-igfx.patch

# linux1394 git patches

Patch2200: linux-2.6-firewire-git-update.patch

Patch2201: linux-2.6-firewire-git-pending.patch

# Quiet boot fixes

# silence the ACPI blacklist code

Patch2802: linux-2.6-silence-acpi-blacklist.patch

# media patches

Patch2899: linux-2.6-v4l-dvb-fixes.patch

Patch2900: linux-2.6-v4l-dvb-update.patch

Patch2901: linux-2.6-v4l-dvb-experimental.patch

Patch2902: linux-2.6-v4l-dvb-uvcvideo-update.patch

Patch2910: linux-2.6-v4l-dvb-add-lgdt3304-support.patch

Patch2912: linux-2.6-v4l-dvb-ir-core-update.patch

#Patch2916: lirc-staging-2.6.36-fixes.patch

Patch2917: hdpvr-ir-enable.patch

Patch3000: linux-2.6-rcu-sched-warning.patch

# fs fixes

# NFSv4

# patches headed upstream

Patch12010: add-appleir-usb-driver.patch

Patch12016: disable-i8042-check-on-apple-mac.patch

Patch12017: prevent-runtime-conntrack-changes.patch

Patch12018: neuter_intel_microcode_load.patch

Patch12030: tpm-fix-stall-on-boot.patch

# Wacom Bamboo

Patch12100: wacom-01-add-fuzz-parameters-to-features.patch

Patch12105: wacom-02-parse-the-bamboo-device-family.patch

Patch12110: wacom-03-collect-device-quirks-into-single-function.patch

Patch12115: wacom-04-add-support-for-the-bamboo-touch-trackpad.patch

Patch12120: wacom-05-add-a-quirk-for-low-resolution-bamboo-devices.patch

Patch12125: wacom-06-request-tablet-data-for-bamboo-pens.patch

Patch12130: wacom-07-move-bamboo-touch-irq-to-its-own-function.patch

Patch12135: wacom-08-add-support-for-bamboo-pen.patch

Patch12140: wacom-09-disable-bamboo-touchpad-when-pen-is-being-used.patch

# Runtime power management

Patch12200: linux-2.6-bluetooth-autosuspend.patch

Patch12201: linux-2.6-uvc-autosuspend.patch

Patch12202: linux-2.6-qcserial-autosuspend.patch

Patch12203: linux-2.6-usb-pci-autosuspend.patch

Patch12204: linux-2.6-enable-more-pci-autosuspend.patch

# PCI patches to fix problems with _CRS

Patch12221: pci-v2-1-4-resources-ensure-alignment-callback-doesn-t-allocate-below-available-start.patch

Patch12222: pci-v2-2-4-x86-PCI-allocate-space-from-the-end-of-a-region-not-the-beginning.patch

Patch12223: pci-v2-3-4-resources-allocate-space-within-a-region-from-the-top-down.patch

Patch12224: pci-v2-4-4-PCI-allocate-bus-resources-from-the-top-down.patch

Patch12300: btusb-macbookpro-7-1.patch

Patch12301: btusb-macbookpro-6-2.patch

Patch12302: pnpacpi-cope-with-invalid-device-ids.patch

Patch12303: dmar-disable-when-ricoh-multifunction.patch

Patch12305: xhci_hcd-suspend-resume.patch

%endif

BuildRoot: %{_tmppath}/kernel-%{KVERREL}-root

%description

The kernel package contains the Linux kernel (vmlinuz), the core of any

Linux operating system.  The kernel handles the basic functions

of the operating system: memory allocation, process allocation, device

input and output, etc.

%package doc

Summary: Various documentation bits found in the kernel source

Group: Documentation

%description doc

This package contains documentation files from the kernel

source. Various bits of information about the Linux kernel and the

device drivers shipped with it are documented in these files.

You'll want to install this package if you need a reference to the

options that can be passed to Linux kernel modules at load time.

%package headers

Summary: Header files for the Linux kernel for use by glibc

Group: Development/System

Obsoletes: glibc-kernheaders

Provides: glibc-kernheaders = 3.0-46

%description headers

Kernel-headers includes the C header files that specify the interface

between the Linux kernel and userspace libraries and programs.  The

header files define structures and constants that are needed for

building most standard programs and are also needed for rebuilding the

glibc package.

%package firmware

Summary: Firmware files used by the Linux kernel

Group: Development/System

# This is... complicated.

# Look at the WHENCE file.

License: GPL+ and GPLv2+ and MIT and Redistributable, no modification permitted

%if "x%{?variant}" != "x"

Provides: kernel-firmware = %{rpmversion}-%{pkg_release}

%endif

%description firmware

Kernel-firmware includes firmware files required for some devices to

operate.

%package bootwrapper

Summary: Boot wrapper files for generating combined kernel + initrd images

Group: Development/System

Requires: gzip

%description bootwrapper

Kernel-bootwrapper contains the wrapper code which makes bootable "zImage"

files combining both kernel and initial ramdisk.

%package debuginfo-common-%{_target_cpu}

Summary: Kernel source files used by %{name}-debuginfo packages

Group: Development/Debug

%description debuginfo-common-%{_target_cpu}

This package is required by %{name}-debuginfo subpackages.

It provides the kernel source files common to all builds.

%if %{with_perf}

%package -n perf

Summary: Performance monitoring for the Linux kernel

Group: Development/System

License: GPLv2

%description -n perf

This package provides the perf tool and the supporting documentation.

%endif

#

# This macro creates a kernel-<subpackage>-debuginfo package.

#	%%kernel_debuginfo_package <subpackage>

#

%define kernel_debuginfo_package() \

%package %{?1:%{1}-}debuginfo\

Summary: Debug information for package %{name}%{?1:-%{1}}\

Group: Development/Debug\

Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\

Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\

AutoReqProv: no\

%description -n %{name}%{?1:-%{1}}-debuginfo\

This package provides debug information for package %{name}%{?1:-%{1}}.\

This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\

%{expand:%%global debuginfo_args %{?debuginfo_args} -p '/.*/%%{KVERREL}%{?1:\.%{1}}/.*|/.*%%{KVERREL}%{?1:\.%{1}}(\.debug)?' -o debuginfo%{?1}.list}\

%{nil}

#

# This macro creates a kernel-<subpackage>-devel package.

#	%%kernel_devel_package <subpackage> <pretty-name>

#

%define kernel_devel_package() \

%package %{?1:%{1}-}devel\

Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\

Group: System Environment/Kernel\

Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\

Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:.%{1}}\

Provides: kernel-devel = %{version}-%{release}%{?1:.%{1}}\

Provides: kernel-devel-uname-r = %{KVERREL}%{?1:.%{1}}\

AutoReqProv: no\

Requires(pre): /usr/bin/find\

Requires: perl\

%description -n kernel%{?variant}%{?1:-%{1}}-devel\

This package provides kernel headers and makefiles sufficient to build modules\

against the %{?2:%{2} }kernel package.\

%{nil}

#

# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.

#	%%define variant_summary The Linux kernel compiled for <configuration>

#	%%kernel_variant_package [-n <pretty-name>] <subpackage>

#

%define kernel_variant_package(n:) \

%package %1\

Summary: %{variant_summary}\

Group: System Environment/Kernel\

%kernel_reqprovconf\

%{expand:%%kernel_devel_package %1 %{!?-n:%1}%{?-n:%{-n*}}}\

%{expand:%%kernel_debuginfo_package %1}\

%{nil}

# First the auxiliary packages of the main kernel package.

%kernel_devel_package

%kernel_debuginfo_package

# Now, each variant package.

%define variant_summary The Linux kernel compiled for SMP machines

%kernel_variant_package -n SMP smp

%description smp

This package includes a SMP version of the Linux kernel. It is

required only on machines with two or more CPUs as well as machines with

hyperthreading technology.

Install the kernel-smp package if your machine uses two or more CPUs.