[PATCH] hid: support for bluetooth tivo slide remote and usb dongle
This patch adds full support for the TiVo Slide Remote, primarily by way
of extending the existing generic HID support. Only four keys are not
usages within a standard usage page, but they're easily handled by the
addition of a HID_UP_TIVOVENDOR usage page. Note that the UP is 0xffff,
which matches the mask, but its also a valid vendor-specific UP, according
to the spec.
What's actually connected to the computer is a Broadcom-made usb dongle,
which has an embedded hub, bluetooth adapter, mouse and keyboard devices.
You pair with the dongle, then the remote sends data that its converted
into HID on the keyboard interface (the mouse interface doesn't do anything
interesting right now, so far as I can tell).
lsusb for this device:
Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp.
Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp.
Bus 004 Device 003: ID 150a:1201
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Speaking of the keyboard interface, the remote actually does contain a
keyboard as well. The top slides away, revealing a reasonably functional
qwerty keyboard (not unlike many slide cell phones), thus the product
name.
Now for some caveats... This device seems to report 0xc (consumer usage
page) 0x20 ("+10") after most key presses. At the moment, this will simply
be ignored, but if a mapping for that usage is added, the remote behaves
very badly (we end up w/a repeating/stuck key until another key is pressed).
Not quite sure what to do about that one, if that usage does get mapped. I
guess a device-specific quirk to just ignore it would work.
Anyway, the thing is working 100% as expected with this patch right now.
Three more things to note... This patch fixes an incorrect mapping of 0xc 0x45,
which was mapped to KEY_RADIO, which is definitely wrong, but may cause some
existing device to now report KEY_RIGHT there. Second, there's also an
unrelated fix for a redundant KERN_DEBUG in a dbg_hid call. Third, the
additions to HID_UP_GENDESK aren't strictly needed by the remote, but the
dongle does try to register those, and they're all technically correct, so
I've included them for the benefit of a device that comes along and
actually does try to use them.
Applies cleanly to hid master, tested w/a 2.6.35.4-based Fedora kernel.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
drivers/hid/hid-input.c | 45 ++++++++++++++++++++++++++++++++++++++++-----
include/linux/hid.h | 1 +
2 files changed, 41 insertions(+), 5 deletions(-)
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 6c03dcc..bd1479e 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -44,11 +44,11 @@ static const unsigned char hid_keyboard[256] = {
72, 73, 82, 83, 86,127,116,117,183,184,185,186,187,188,189,190,
191,192,193,194,134,138,130,132,128,129,131,137,133,135,136,113,
115,114,unk,unk,unk,121,unk, 89, 93,124, 92, 94, 95,unk,unk,unk,
- 122,123, 90, 91, 85,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,
+ 122,123, 90, 91, 85,unk,unk,unk,unk,unk,unk,unk,111,unk,unk,unk,
unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,
unk,unk,unk,unk,unk,unk,179,180,unk,unk,unk,unk,unk,unk,unk,unk,
unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,
- unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,
+ unk,unk,unk,unk,unk,unk,unk,unk,111,unk,unk,unk,unk,unk,unk,unk,
29, 42, 56,125, 97, 54,100,126,164,166,165,163,161,115,114,113,
150,158,159,128,136,177,178,176,142,152,173,140,unk,unk,unk,unk
};
@@ -136,7 +136,7 @@ static int hidinput_setkeycode(struct input_dev *dev,
clear_bit(old_keycode, dev->keybit);
set_bit(usage->code, dev->keybit);
- dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n", keycode, scancode);
+ dbg_hid("Assigned keycode %d to HID usage code %x\n", keycode, scancode);
/* Set the keybit for the old keycode if the old keycode is used
* by another key */
if (hidinput_find_key (hid, 0, old_keycode))
@@ -235,6 +235,18 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case 0x1: map_key_clear(KEY_POWER); break;
case 0x2: map_key_clear(KEY_SLEEP); break;
case 0x3: map_key_clear(KEY_WAKEUP); break;
+ case 0x4: map_key_clear(KEY_CONTEXT_MENU); break;
+ case 0x5: map_key_clear(KEY_MENU); break;
+ case 0x6: map_key_clear(KEY_PROG1); break;
+ case 0x7: map_key_clear(KEY_HELP); break;
+ case 0x8: map_key_clear(KEY_EXIT); break;
+ case 0x9: map_key_clear(KEY_SELECT); break;
+ case 0xa: map_key_clear(KEY_RIGHT); break;
+ case 0xb: map_key_clear(KEY_LEFT); break;
+ case 0xc: map_key_clear(KEY_UP); break;
+ case 0xd: map_key_clear(KEY_DOWN); break;
+ case 0xe: map_key_clear(KEY_POWER2); break;
+ case 0xf: map_key_clear(KEY_RESTART); break;
default: goto unknown;
}
break;
@@ -343,12 +355,24 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case HID_UP_CONSUMER: /* USB HUT v1.1, pages 56-62 */
switch (usage->hid & HID_USAGE) {
case 0x000: goto ignore;
+ case 0x030: map_key_clear(KEY_POWER); break;
case 0x034: map_key_clear(KEY_SLEEP); break;
case 0x036: map_key_clear(BTN_MISC); break;
case 0x040: map_key_clear(KEY_MENU); break;
- case 0x045: map_key_clear(KEY_RADIO); break;
-
+ case 0x041: map_key_clear(KEY_SELECT); break;
+ case 0x042: map_key_clear(KEY_UP); break;
+ case 0x043: map_key_clear(KEY_DOWN); break;
+ case 0x044: map_key_clear(KEY_LEFT); break;
+ case 0x045: map_key_clear(KEY_RIGHT); break;
+
+ case 0x069: map_key_clear(KEY_RED); break;
+ case 0x06a: map_key_clear(KEY_GREEN); break;
+ case 0x06b: map_key_clear(KEY_BLUE); break;
+ case 0x06c: map_key_clear(KEY_YELLOW); break;
+ case 0x06d: map_key_clear(KEY_ZOOM); break;
+
+ case 0x082: map_key_clear(KEY_VIDEO_NEXT); break;
case 0x083: map_key_clear(KEY_LAST); break;
case 0x088: map_key_clear(KEY_PC); break;
case 0x089: map_key_clear(KEY_TV); break;
@@ -390,6 +414,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case 0x0e5: map_key_clear(KEY_BASSBOOST); break;
case 0x0e9: map_key_clear(KEY_VOLUMEUP); break;
case 0x0ea: map_key_clear(KEY_VOLUMEDOWN); break;
+ case 0x0f5: map_key_clear(KEY_SLOW); break;
case 0x182: map_key_clear(KEY_BOOKMARKS); break;
case 0x183: map_key_clear(KEY_CONFIG); break;
@@ -491,6 +516,16 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
}
break;
+ case HID_UP_TIVOVENDOR:
+ switch (usage->hid & HID_USAGE) {
+ case 0x3d: map_key_clear(KEY_PROG1); break;
+ case 0x3e: map_key_clear(KEY_TV); break;
+ case 0x41: map_key_clear(KEY_PAGEDOWN); break;
+ case 0x42: map_key_clear(KEY_PAGEUP); break;
+ default: goto unknown;
+ }
+ break;
+
default:
unknown:
if (field->report_size == 1) {
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 42a0f1d..083cfb2 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -200,6 +200,7 @@ struct hid_item {
#define HID_UP_MSVENDOR 0xff000000
#define HID_UP_CUSTOM 0x00ff0000
#define HID_UP_LOGIVENDOR 0xffbc0000
+#define HID_UP_TIVOVENDOR 0xffff0000
#define HID_USAGE 0x0000ffff