diff -Naurp linux-2.6.35/drivers/media/IR/ene_ir.c linux-2.6.35.new/drivers/media/IR/ene_ir.c
--- linux-2.6.35/drivers/media/IR/ene_ir.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.35.new/drivers/media/IR/ene_ir.c	2010-09-09 23:21:49.000000000 -0400
@@ -0,0 +1,1023 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (pnp id: ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+#include <media/ir-common.h>
+#include "ene_ir.h"
+
+
+static int sample_period = -1;
+static int enable_idle = 1;
+static int input = 1;
+static int debug;
+static int txsim;
+
+static int ene_irq_status(struct ene_device *dev);
+
+/* read a hardware register */
+static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
+{
+	u8 retval;
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+	retval = inb(dev->hw_io + ENE_IO);
+
+	ene_dbg_verbose("reg %04x == %02x", reg, retval);
+	return retval;
+}
+
+/* write a hardware register */
+static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
+{
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+	outb(value, dev->hw_io + ENE_IO);
+
+	ene_dbg_verbose("reg %04x <- %02x", reg, value);
+}
+
+/* change specific bits in hardware register */
+static void ene_hw_write_reg_mask(struct ene_device *dev,
+				  u16 reg, u8 value, u8 mask)
+{
+	u8 regvalue;
+
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+
+	regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
+	regvalue |= (value & mask);
+	outb(regvalue, dev->hw_io + ENE_IO);
+
+	ene_dbg_verbose("reg %04x <- %02x (mask=%02x)", reg, value, mask);
+}
+
+/* detect hardware features */
+static int ene_hw_detect(struct ene_device *dev)
+{
+	u8 chip_major, chip_minor;
+	u8 hw_revision, old_ver;
+	u8 tmp;
+	u8 fw_capabilities;
+	int pll_freq;
+
+	tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
+	ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
+
+	chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
+	chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
+
+	ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
+	hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
+	old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
+
+	pll_freq = (ene_hw_read_reg(dev, ENE_PLLFRH) << 4) +
+		(ene_hw_read_reg(dev, ENE_PLLFRL) >> 4);
+
+	if (pll_freq != 1000)
+		dev->rx_period_adjust = 4;
+	else
+		dev->rx_period_adjust = 2;
+
+
+	ene_printk(KERN_NOTICE, "PLL freq = %d\n", pll_freq);
+
+	if (hw_revision == 0xFF) {
+
+		ene_printk(KERN_WARNING, "device seems to be disabled\n");
+		ene_printk(KERN_WARNING,
+			"send a mail to lirc-list@lists.sourceforge.net\n");
+		ene_printk(KERN_WARNING, "please attach output of acpidump\n");
+		return -ENODEV;
+	}
+
+	if (chip_major == 0x33) {
+		ene_printk(KERN_WARNING, "chips 0x33xx aren't supported\n");
+		return -ENODEV;
+	}
+
+	if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
+		dev->hw_revision = ENE_HW_C;
+	} else if (old_ver == 0x24 && hw_revision == 0xC0) {
+		dev->hw_revision = ENE_HW_B;
+		ene_printk(KERN_NOTICE, "KB3926B detected\n");
+	} else {
+		dev->hw_revision = ENE_HW_D;
+		ene_printk(KERN_WARNING,
+			"unknown ENE chip detected, assuming KB3926D\n");
+		ene_printk(KERN_WARNING,
+			"driver support might be not complete");
+
+	}
+
+	ene_printk(KERN_DEBUG,
+		"chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n",
+			chip_major, chip_minor, old_ver, hw_revision);
+
+	/* detect features hardware supports */
+	if (dev->hw_revision < ENE_HW_C)
+		return 0;
+
+	fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
+	ene_dbg("Firmware capabilities: %02x", fw_capabilities);
+
+	dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
+	dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
+
+	dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
+	    (fw_capabilities & ENE_FW2_FAN_AS_NRML_IN);
+
+	ene_printk(KERN_NOTICE, "hardware features:\n");
+	ene_printk(KERN_NOTICE,
+		"learning and transmit %s, gpio40_learn %s, fan_in %s\n",
+	       dev->hw_learning_and_tx_capable ? "on" : "off",
+	       dev->hw_gpio40_learning ? "on" : "off",
+	       dev->hw_fan_as_normal_input ? "on" : "off");
+
+	if (dev->hw_learning_and_tx_capable) {
+		ene_printk(KERN_WARNING,
+		"Device supports transmitting, but that support is\n");
+		ene_printk(KERN_WARNING,
+		"lightly tested. Please test it and mail\n");
+		ene_printk(KERN_WARNING,
+		"lirc-list@lists.sourceforge.net\n");
+	}
+	return 0;
+}
+
+/* this enables/disables IR input via gpio40*/
+static void ene_enable_gpio40_receive(struct ene_device *dev, int enable)
+{
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, enable ?
+			      0 : ENE_CIR_CONF2_GPIO40DIS,
+			      ENE_CIR_CONF2_GPIO40DIS);
+}
+
+/* this enables/disables IR via standard input */
+static void ene_enable_normal_receive(struct ene_device *dev, int enable)
+{
+	ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_RX_ON : 0);
+}
+
+/* this enables/disables IR input via unused fan tachtometer input */
+static void ene_enable_fan_receive(struct ene_device *dev, int enable)
+{
+	if (!enable)
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
+	else {
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
+	}
+	dev->rx_fan_input_inuse = enable;
+}
+
+
+/* Sense current received carrier */
+static int ene_rx_sense_carrier(struct ene_device *dev)
+{
+	int period = ene_hw_read_reg(dev, ENE_RX_CARRIER);
+	int carrier;
+	ene_dbg("RX: hardware carrier period = %02x", period);
+
+	if (!(period & ENE_RX_CARRIER_VALID))
+		return 0;
+
+	period &= ~ENE_RX_CARRIER_VALID;
+
+	if (!period)
+		return 0;
+
+	carrier = 2000000 / period;
+	ene_dbg("RX: sensed carrier = %d Hz", carrier);
+	return carrier;
+}
+
+/* determine which input to use*/
+static void ene_rx_set_inputs(struct ene_device *dev)
+{
+	int learning_mode = dev->learning_enabled;
+
+	ene_dbg("RX: setup receiver, learning mode = %d", learning_mode);
+
+	ene_enable_normal_receive(dev, 1);
+
+	/* old hardware doesn't support learning mode for sure */
+	if (dev->hw_revision <= ENE_HW_B)
+		return;
+
+	/* receiver not learning capable, still set gpio40 correctly */
+	if (!dev->hw_learning_and_tx_capable) {
+		ene_enable_gpio40_receive(dev, !dev->hw_gpio40_learning);
+		return;
+	}
+
+	/* enable learning mode */
+	if (learning_mode) {
+		ene_enable_gpio40_receive(dev, dev->hw_gpio40_learning);
+
+		/* fan input is not used for learning */
+		if (dev->hw_fan_as_normal_input)
+			ene_enable_fan_receive(dev, 0);
+
+	/* disable learning mode */
+	} else {
+		if (dev->hw_fan_as_normal_input) {
+			ene_enable_fan_receive(dev, 1);
+			ene_enable_normal_receive(dev, 0);
+		} else
+			ene_enable_gpio40_receive(dev,
+					!dev->hw_gpio40_learning);
+	}
+
+	/* set few additional settings for this mode */
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_mode ?
+			      ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
+
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_mode ?
+			      ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
+
+	if (dev->rx_fan_input_inuse) {
+		dev->props->rx_resolution = ENE_SAMPLE_PERIOD_FAN * 1000;
+
+		dev->props->timeout =
+			ENE_FAN_VALUE_MASK * ENE_SAMPLE_PERIOD_FAN * 1000;
+	} else {
+		dev->props->rx_resolution = sample_period * 1000;
+		dev->props->timeout = ENE_MAXGAP * 1000;
+	}
+}
+
+/* Enable the device for receive */
+static void ene_rx_enable(struct ene_device *dev)
+{
+	u8 reg_value;
+
+	if (dev->hw_revision < ENE_HW_C) {
+		ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
+		ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
+	} else {
+		reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
+		reg_value |= ENEC_IRQ_UNK_EN;
+		reg_value &= ~ENEC_IRQ_STATUS;
+		reg_value |= (dev->irq & ENEC_IRQ_MASK);
+		ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
+		ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
+	}
+
+	ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
+	ene_rx_set_inputs(dev);
+
+	/* set sampling period */
+	ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
+
+	/* ack any pending irqs - just in case */
+	ene_irq_status(dev);
+
+	/* enable firmware bits */
+	ene_hw_write_reg_mask(dev, ENE_FW1,
+			      ENE_FW1_ENABLE | ENE_FW1_IRQ,
+			      ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+	/* enter idle mode */
+	ir_raw_event_set_idle(dev->idev, 1);
+	ir_raw_event_reset(dev->idev);
+
+}
+
+/* Disable the device receiver */
+static void ene_rx_disable(struct ene_device *dev)
+{
+	/* disable inputs */
+	ene_enable_normal_receive(dev, 0);
+
+	if (dev->hw_fan_as_normal_input)
+		ene_enable_fan_receive(dev, 0);
+
+	/* disable hardware IRQ and firmware flag */
+	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+	ir_raw_event_set_idle(dev->idev, 1);
+	ir_raw_event_reset(dev->idev);
+}
+
+
+/* prepare transmission */
+static void ene_tx_prepare(struct ene_device *dev)
+{
+	u8 conf1;
+
+	conf1 = ene_hw_read_reg(dev, ENE_CIR_CONF1);
+	dev->saved_conf1 = conf1;
+
+	if (dev->hw_revision == ENE_HW_C)
+		conf1 &= ~ENE_CIR_CONF1_TX_CLEAR;
+
+	/* Enable TX engine */
+	conf1 |= ENE_CIR_CONF1_TX_ON;
+
+	/* Set carrier */
+	if (dev->tx_period) {
+
+		/* NOTE: duty cycle handling is just a guess, it might
+			not be aviable. Default values were tested */
+		int tx_period_in500ns = dev->tx_period * 2;
+
+		int tx_pulse_width_in_500ns =
+			tx_period_in500ns / (100 / dev->tx_duty_cycle);
+
+		if (!tx_pulse_width_in_500ns)
+			tx_pulse_width_in_500ns = 1;
+
+		ene_dbg("TX: pulse distance = %d * 500 ns", tx_period_in500ns);
+		ene_dbg("TX: pulse width = %d * 500 ns",
+						tx_pulse_width_in_500ns);
+
+		ene_hw_write_reg(dev, ENE_TX_PERIOD, ENE_TX_PERIOD_UNKBIT |
+					tx_period_in500ns);
+
+		ene_hw_write_reg(dev, ENE_TX_PERIOD_PULSE,
+					tx_pulse_width_in_500ns);
+
+		conf1 |= ENE_CIR_CONF1_TX_CARR;
+	} else
+		conf1 &= ~ENE_CIR_CONF1_TX_CARR;
+
+	ene_hw_write_reg(dev, ENE_CIR_CONF1, conf1);
+
+}
+
+/* end transmission */
+static void ene_tx_complete(struct ene_device *dev)
+{
+	ene_hw_write_reg(dev, ENE_CIR_CONF1, dev->saved_conf1);
+	dev->tx_buffer = NULL;
+}
+
+/* set transmit mask */
+static void ene_tx_hw_set_transmiter_mask(struct ene_device *dev)
+{
+	u8 txport1 = ene_hw_read_reg(dev, ENE_TX_PORT1) & ~ENE_TX_PORT1_EN;
+	u8 txport2 = ene_hw_read_reg(dev, ENE_TX_PORT2) & ~ENE_TX_PORT2_EN;
+
+	if (dev->transmitter_mask & 0x01)
+		txport1 |= ENE_TX_PORT1_EN;
+
+	if (dev->transmitter_mask & 0x02)
+		txport2 |= ENE_TX_PORT2_EN;
+
+	ene_hw_write_reg(dev, ENE_TX_PORT1, txport1);
+	ene_hw_write_reg(dev, ENE_TX_PORT2, txport2);
+}
+
+/* TX one sample - must be called with dev->hw_lock*/
+static void ene_tx_sample(struct ene_device *dev)
+{
+	u8 raw_tx;
+	u32 sample;
+
+	if (!dev->tx_buffer) {
+		ene_dbg("TX: attempt to transmit NULL buffer");
+		return;
+	}
+
+	/* Grab next TX sample */
+	if (!dev->tx_sample) {
+again:
+		if (dev->tx_pos == dev->tx_len + 1) {
+			if (!dev->tx_done) {
+				ene_dbg("TX: no more data to send");
+				dev->tx_done = 1;
+				goto exit;
+			} else {
+				ene_dbg("TX: last sample sent by hardware");
+				ene_tx_complete(dev);
+				complete(&dev->tx_complete);
+				return;
+			}
+		}
+
+		sample = dev->tx_buffer[dev->tx_pos++];
+		dev->tx_sample_pulse = !dev->tx_sample_pulse;
+
+		ene_dbg("TX: sample %8d (%s)", sample, dev->tx_sample_pulse ?
+							"pulse" : "space");
+
+		dev->tx_sample = DIV_ROUND_CLOSEST(sample, ENE_TX_SMPL_PERIOD);
+
+		/* guard against too short samples */
+		if (!dev->tx_sample)
+			goto again;
+	}
+
+	raw_tx = min(dev->tx_sample , (unsigned int)ENE_TX_SMLP_MASK);
+	dev->tx_sample -= raw_tx;
+
+	if (dev->tx_sample_pulse)
+		raw_tx |= ENE_TX_PULSE_MASK;
+
+	ene_hw_write_reg(dev, ENE_TX_INPUT1 + dev->tx_reg, raw_tx);
+	dev->tx_reg = !dev->tx_reg;
+exit:
+	/* simulate TX done interrupt */
+	if (txsim)
+		mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);
+}
+
+/* timer to simulate tx done interrupt */
+static void ene_tx_irqsim(unsigned long data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	ene_tx_sample(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+
+/* read irq status and ack it */
+static int ene_irq_status(struct ene_device *dev)
+{
+	u8 irq_status;
+	u8 fw_flags1, fw_flags2;
+	int cur_rx_pointer;
+	int retval = 0;
+
+	fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
+	cur_rx_pointer = !!(fw_flags2 & ENE_FW2_BUF_HIGH);
+
+	if (dev->hw_revision < ENE_HW_C) {
+		irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
+
+		if (!(irq_status & ENEB_IRQ_STATUS_IR))
+			return 0;
+
+		ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
+				 irq_status & ~ENEB_IRQ_STATUS_IR);
+		dev->rx_pointer = cur_rx_pointer;
+		return ENE_IRQ_RX;
+	}
+
+	irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
+
+	if (!(irq_status & ENEC_IRQ_STATUS))
+		return 0;
+
+	/* original driver does that twice - a workaround ? */
+	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+
+	/* clear unknown flag in F8F9 */
+	if (fw_flags2 & ENE_FW2_IRQ_CLR)
+		ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
+
+	/* check if this is a TX interrupt */
+	fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
+	if (fw_flags1 & ENE_FW1_TXIRQ) {
+		ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
+		retval |= ENE_IRQ_TX;
+	}
+
+	/* Check if this is RX interrupt */
+	if (dev->rx_pointer != cur_rx_pointer) {
+		retval |= ENE_IRQ_RX;
+		dev->rx_pointer = cur_rx_pointer;
+
+	} else if (!(retval & ENE_IRQ_TX)) {
+		ene_dbg("RX: interrupt without change in RX pointer(%d)",
+			dev->rx_pointer);
+		retval |= ENE_IRQ_RX;
+	}
+
+	if ((retval & ENE_IRQ_RX) && (retval & ENE_IRQ_TX))
+		ene_dbg("both RX and TX interrupt at same time");
+
+	return retval;
+}
+
+/* interrupt handler */
+static irqreturn_t ene_isr(int irq, void *data)
+{
+	u16 hw_value;
+	int i, hw_sample;
+	int pulse;
+	int irq_status;
+	unsigned long flags;
+	int carrier = 0;
+	irqreturn_t retval = IRQ_NONE;
+	struct ene_device *dev = (struct ene_device *)data;
+	struct ir_raw_event ev;
+
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	irq_status = ene_irq_status(dev);
+
+	if (!irq_status)
+		goto unlock;
+
+	retval = IRQ_HANDLED;
+
+	if (irq_status & ENE_IRQ_TX) {
+
+		if (!dev->hw_learning_and_tx_capable) {
+			ene_dbg("TX interrupt on unsupported device!");
+			goto unlock;
+		}
+		ene_tx_sample(dev);
+	}
+
+	if (!(irq_status & ENE_IRQ_RX))
+		goto unlock;
+
+
+	if (dev->carrier_detect_enabled || debug)
+		carrier = ene_rx_sense_carrier(dev);
+#if 0
+	/* TODO */
+	if (dev->carrier_detect_enabled && carrier)
+		ir_raw_event_report_frequency(dev->idev, carrier);
+#endif
+
+	for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
+		hw_value = ene_hw_read_reg(dev,
+				ENE_SAMPLE_BUFFER + dev->rx_pointer * 4 + i);
+
+		if (dev->rx_fan_input_inuse) {
+			/* read high part of the sample */
+			hw_value |= ene_hw_read_reg(dev,
+			    ENE_SAMPLE_BUFFER_FAN +
+					dev->rx_pointer * 4 + i) << 8;
+			pulse = hw_value & ENE_FAN_SMPL_PULS_MSK;
+
+			/* clear space bit, and other unused bits */
+			hw_value &= ENE_FAN_VALUE_MASK;
+			hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
+
+		} else {
+			pulse = !(hw_value & ENE_SAMPLE_SPC_MASK);
+			hw_value &= ENE_SAMPLE_VALUE_MASK;
+			hw_sample = hw_value * sample_period;
+
+			if (dev->rx_period_adjust) {
+				hw_sample *= (100 - dev->rx_period_adjust);
+				hw_sample /= 100;
+			}
+		}
+		/* no more data */
+		if (!(hw_value))
+			break;
+
+		ene_dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
+
+
+		ev.duration = hw_sample * 1000;
+		ev.pulse = pulse;
+		ir_raw_event_store_with_filter(dev->idev, &ev);
+	}
+
+	ir_raw_event_handle(dev->idev);
+unlock:
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return retval;
+}
+
+/* Initialize default settings */
+static void ene_setup_settings(struct ene_device *dev)
+{
+	dev->tx_period = 32;
+	dev->tx_duty_cycle = 25; /*%*/
+	dev->transmitter_mask = 3;
+
+	/* Force learning mode if (input == 2), otherwise
+		let user set it with LIRC_SET_REC_CARRIER */
+	dev->learning_enabled =
+		(input == 2 && dev->hw_learning_and_tx_capable);
+
+	dev->rx_pointer = -1;
+
+}
+
+/* outside interface: called on first open*/
+static int ene_open(void *data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->in_use = 1;
+	ene_setup_settings(dev);
+	ene_rx_enable(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+/* outside interface: called on device close*/
+static void ene_close(void *data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	spin_lock_irqsave(&dev->hw_lock, flags);
+
+	ene_rx_disable(dev);
+	dev->in_use = 0;
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* outside interface: set transmitter mask */
+static int ene_set_tx_mask(void *data, u32 tx_mask)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	ene_dbg("TX: attempt to set transmitter mask %02x", tx_mask);
+
+	/* invalid txmask */
+	if (!tx_mask || tx_mask & ~0x3) {
+		ene_dbg("TX: invalid mask");
+		/* return count of transmitters */
+		return 2;
+	}
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->transmitter_mask = tx_mask;
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+/* outside interface : set tx carrier */
+static int ene_set_tx_carrier(void *data, u32 carrier)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	u32 period = 1000000 / carrier; /* (1 / freq) (* # usec in 1 sec) */
+
+	ene_dbg("TX: attempt to set tx carrier to %d kHz", carrier);
+
+	if (period && (period > ENE_TX_PERIOD_MAX ||
+			period < ENE_TX_PERIOD_MIN)) {
+
+		ene_dbg("TX: out of range %d-%d carrier, "
+			"falling back to 32 kHz",
+			1000 / ENE_TX_PERIOD_MIN,
+			1000 / ENE_TX_PERIOD_MAX);
+
+		period = 32; /* this is just a coincidence!!! */
+	}
+	ene_dbg("TX: set carrier to %d kHz", carrier);
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->tx_period = period;
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+
+/* outside interface: enable learning mode */
+static int ene_set_learning_mode(void *data, int enable)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	if (enable == dev->learning_enabled)
+		return 0;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->learning_enabled = enable;
+	ene_rx_set_inputs(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+/* outside interface: set rec carrier */
+static int ene_set_rec_carrier(void *data, u32 min, u32 max)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	ene_set_learning_mode(dev,
+		max > ENE_NORMAL_RX_HI || min < ENE_NORMAL_RX_LOW);
+	return 0;
+}
+
+/* outside interface: enable or disable idle mode */
+static void ene_rx_set_idle(void *data, int idle)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	ene_dbg("%sabling idle mode", idle ? "en" : "dis");
+
+	ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
+		(enable_idle && idle) ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
+			ENE_CIR_SAMPLE_OVERFLOW);
+}
+
+
+/* outside interface: transmit */
+static int ene_transmit(void *data, int *buf, u32 n)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	dev->tx_buffer = buf;
+	dev->tx_len = n / sizeof(int);
+	dev->tx_pos = 0;
+	dev->tx_reg = 0;
+	dev->tx_done = 0;
+	dev->tx_sample = 0;
+	dev->tx_sample_pulse = 0;
+
+	ene_dbg("TX: %d samples", dev->tx_len);
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+
+	ene_tx_hw_set_transmiter_mask(dev);
+	ene_tx_prepare(dev);
+
+	/* Transmit first two samples */
+	ene_tx_sample(dev);
+	ene_tx_sample(dev);
+
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+	if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {
+		ene_dbg("TX: timeout");
+		spin_lock_irqsave(&dev->hw_lock, flags);
+		ene_tx_complete(dev);
+		spin_unlock_irqrestore(&dev->hw_lock, flags);
+	} else
+		ene_dbg("TX: done");
+	return n;
+}
+
+
+/* probe entry */
+static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
+{
+	int error = -ENOMEM;
+	struct ir_dev_props *ir_props;
+	struct input_dev *input_dev;
+	struct ene_device *dev;
+
+	/* allocate memory */
+	input_dev = input_allocate_device();
+	ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
+
+	if (!input_dev || !ir_props || !dev)
+		goto error;
+
+	/* validate resources */
+	error = -ENODEV;
+
+	if (!pnp_port_valid(pnp_dev, 0) ||
+	    pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
+		goto error;
+
+	if (!pnp_irq_valid(pnp_dev, 0))
+		goto error;
+
+	dev->hw_io = pnp_port_start(pnp_dev, 0);
+	dev->irq = pnp_irq(pnp_dev, 0);
+	spin_lock_init(&dev->hw_lock);
+
+	/* claim the resources */
+	error = -EBUSY;
+	if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
+		goto error;
+
+	if (request_irq(dev->irq, ene_isr,
+			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
+		goto error;
+
+	pnp_set_drvdata(pnp_dev, dev);
+	dev->pnp_dev = pnp_dev;
+
+	/* detect hardware version and features */
+	error = ene_hw_detect(dev);
+	if (error)
+		goto error;
+
+	ene_setup_settings(dev);
+
+	if (!dev->hw_learning_and_tx_capable && txsim) {
+		dev->hw_learning_and_tx_capable = 1;
+		setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
+						(long unsigned int)dev);
+		ene_printk(KERN_WARNING,
+			"Simulation of TX activated\n");
+	}
+
+	ir_props->driver_type = RC_DRIVER_IR_RAW;
+	ir_props->allowed_protos = IR_TYPE_ALL;
+	ir_props->priv = dev;
+	ir_props->open = ene_open;
+	ir_props->close = ene_close;
+	ir_props->min_timeout = ENE_MINGAP * 1000;
+	ir_props->max_timeout = ENE_MAXGAP * 1000;
+	ir_props->timeout = ENE_MAXGAP * 1000;
+
+	if (dev->hw_revision == ENE_HW_B)
+		ir_props->s_idle = ene_rx_set_idle;
+
+
+	dev->props = ir_props;
+	dev->idev = input_dev;
+
+	/* don't allow too short/long sample periods */
+	if (sample_period < 5 || sample_period > 0x7F)
+		sample_period = -1;
+
+	/* choose default sample period */
+	if (sample_period == -1) {
+
+		sample_period = 50;
+
+		/* on revB, hardware idle mode eats first sample
+		  if we set too low sample period */
+		if (dev->hw_revision == ENE_HW_B && enable_idle)
+			sample_period = 75;
+	}
+
+	ir_props->rx_resolution = sample_period * 1000;
+
+	if (dev->hw_learning_and_tx_capable) {
+
+		ir_props->s_learning_mode = ene_set_learning_mode;
+
+		if (input == 0)
+			ir_props->s_rx_carrier_range = ene_set_rec_carrier;
+
+		init_completion(&dev->tx_complete);
+		ir_props->tx_ir = ene_transmit;
+		ir_props->s_tx_mask = ene_set_tx_mask;
+		ir_props->s_tx_carrier = ene_set_tx_carrier;
+		ir_props->tx_resolution = ENE_TX_SMPL_PERIOD * 1000;
+		/* ir_props->s_carrier_report = ene_set_carrier_report; */
+	}
+
+
+	device_set_wakeup_capable(&pnp_dev->dev, 1);
+	device_set_wakeup_enable(&pnp_dev->dev, 1);
+
+	if (dev->hw_learning_and_tx_capable)
+		input_dev->name = "ENE eHome Infrared Remote Transceiver";
+	else
+		input_dev->name = "ENE eHome Infrared Remote Receiver";
+
+
+	error = -ENODEV;
+	if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
+							ENE_DRIVER_NAME))
+		goto error;
+
+
+	ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
+	return 0;
+error:
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+	if (dev->hw_io)
+		release_region(dev->hw_io, ENE_MAX_IO);
+
+	input_free_device(input_dev);
+	kfree(ir_props);
+	kfree(dev);
+	return error;
+}
+
+/* main unload function */
+static void ene_remove(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	ene_rx_disable(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+	free_irq(dev->irq, dev);
+	release_region(dev->hw_io, ENE_MAX_IO);
+	ir_input_unregister(dev->idev);
+	kfree(dev->props);
+	kfree(dev);
+}
+
+/* enable wake on IR (wakes on specific button on original remote) */
+static void ene_enable_wake(struct ene_device *dev, int enable)
+{
+	enable = enable && device_may_wakeup(&dev->pnp_dev->dev);
+
+	ene_dbg("wake on IR %s", enable ? "enabled" : "disabled");
+
+	ene_hw_write_reg_mask(dev, ENE_FW1, enable ?
+		ENE_FW1_WAKE : 0, ENE_FW1_WAKE);
+}
+
+#ifdef CONFIG_PM
+static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	ene_enable_wake(dev, 1);
+	return 0;
+}
+
+static int ene_resume(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	if (dev->in_use)
+		ene_rx_enable(dev);
+
+	ene_enable_wake(dev, 0);
+	return 0;
+}
+#endif
+
+static void ene_shutdown(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	ene_enable_wake(dev, 1);
+}
+
+static const struct pnp_device_id ene_ids[] = {
+	{.id = "ENE0100",},
+	{.id = "ENE0200",},
+	{.id = "ENE0201",},
+	{.id = "ENE0202",},
+	{},
+};
+
+static struct pnp_driver ene_driver = {
+	.name = ENE_DRIVER_NAME,
+	.id_table = ene_ids,
+	.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+
+	.probe = ene_probe,
+	.remove = __devexit_p(ene_remove),
+#ifdef CONFIG_PM
+	.suspend = ene_suspend,
+	.resume = ene_resume,
+#endif
+	.shutdown = ene_shutdown,
+};
+
+static int __init ene_init(void)
+{
+	return pnp_register_driver(&ene_driver);
+}
+
+static void ene_exit(void)
+{
+	pnp_unregister_driver(&ene_driver);
+}
+
+module_param(sample_period, int, S_IRUGO);
+MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");
+
+module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_idle,
+	"Enables turning off signal sampling after long inactivity time; "
+	"if disabled might help detecting input signal (default: enabled)"
+	" (KB3926B only)");
+
+module_param(input, bool, S_IRUGO);
+MODULE_PARM_DESC(input, "select which input to use "
+	"0 - auto, 1 - standard, 2 - wideband(KB3926C+)");
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debug (debug=2 verbose debug output)");
+
+module_param(txsim, bool, S_IRUGO);
+MODULE_PARM_DESC(txsim,
+	"Simulate TX features on unsupported hardware (dangerous)");
+
+MODULE_DEVICE_TABLE(pnp, ene_ids);
+MODULE_DESCRIPTION
+	("Infrared input driver for KB3926B/KB3926C/KB3926D "
+	"(aka ENE0100/ENE0200/ENE0201) CIR port");
+
+MODULE_AUTHOR("Maxim Levitsky");
+MODULE_LICENSE("GPL");
+
+module_init(ene_init);
+module_exit(ene_exit);
diff -Naurp linux-2.6.35/drivers/media/IR/ene_ir.h linux-2.6.35.new/drivers/media/IR/ene_ir.h
--- linux-2.6.35/drivers/media/IR/ene_ir.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.35.new/drivers/media/IR/ene_ir.h	2010-09-09 23:21:49.000000000 -0400
@@ -0,0 +1,235 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/spinlock.h>
+
+
+/* hardware address */
+#define ENE_STATUS		0	/* hardware status - unused */
+#define ENE_ADDR_HI		1	/* hi byte of register address */
+#define ENE_ADDR_LO		2	/* low byte of register address */
+#define ENE_IO			3	/* read/write window */
+#define ENE_MAX_IO		4
+
+/* 8 bytes of samples, divided in 2 halfs*/
+#define ENE_SAMPLE_BUFFER	0xF8F0	/* regular sample buffer */
+#define ENE_SAMPLE_SPC_MASK	0x80	/* sample is space */
+#define ENE_SAMPLE_VALUE_MASK	0x7F
+#define ENE_SAMPLE_OVERFLOW	0x7F
+#define ENE_SAMPLES_SIZE	4
+
+/* fan input sample buffer */
+#define ENE_SAMPLE_BUFFER_FAN	0xF8FB	/* this buffer holds high byte of */
+					/* each sample of normal buffer */
+#define ENE_FAN_SMPL_PULS_MSK	0x8000	/* this bit of combined sample */
+					/* if set, says that sample is pulse */
+#define ENE_FAN_VALUE_MASK	0x0FFF  /* mask for valid bits of the value */
+
+/* first firmware register */
+#define ENE_FW1			0xF8F8
+#define	ENE_FW1_ENABLE		0x01	/* enable fw processing */
+#define ENE_FW1_TXIRQ		0x02	/* TX interrupt pending */
+#define ENE_FW1_WAKE		0x40	/* enable wake from S3 */
+#define ENE_FW1_IRQ		0x80	/* enable interrupt */
+
+/* second firmware register */
+#define ENE_FW2			0xF8F9
+#define ENE_FW2_BUF_HIGH	0x01	/* which half of the buffer to read */
+#define ENE_FW2_IRQ_CLR		0x04	/* clear this on IRQ */
+#define ENE_FW2_GP40_AS_LEARN	0x08	/* normal input is used as */
+					/* learning input */
+#define ENE_FW2_FAN_AS_NRML_IN	0x40	/* fan is used as normal input */
+#define ENE_FW2_LEARNING	0x80	/* hardware supports learning and TX */
+
+/* transmitter ports */
+#define ENE_TX_PORT2		0xFC01	/* this enables one or both */
+#define ENE_TX_PORT2_EN		0x20	/* TX ports */
+#define ENE_TX_PORT1		0xFC08
+#define ENE_TX_PORT1_EN		0x02
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ		0xFD09	/* IRQ number */
+#define ENEB_IRQ_UNK1		0xFD17	/* unknown setting = 1 */
+#define ENEB_IRQ_STATUS		0xFD80	/* irq status */
+#define ENEB_IRQ_STATUS_IR	0x20	/* IR irq */
+
+/* fan as input settings - only if learning capable */
+#define ENE_FAN_AS_IN1		0xFE30  /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN	0xCD
+#define ENE_FAN_AS_IN2		0xFE31  /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN	0x03
+#define ENE_SAMPLE_PERIOD_FAN   61	/* fan input has fixed sample period */
+
+/* IRQ registers block (for revision C,D) */
+#define ENEC_IRQ		0xFE9B	/* new irq settings register */
+#define ENEC_IRQ_MASK		0x0F	/* irq number mask */
+#define ENEC_IRQ_UNK_EN		0x10	/* always enabled */
+#define ENEC_IRQ_STATUS		0x20	/* irq status and ACK */
+
+/* CIR block settings */
+#define ENE_CIR_CONF1		0xFEC0
+#define ENE_CIR_CONF1_TX_CLEAR	0x01	/* clear that on revC */
+					/* while transmitting */
+#define ENE_CIR_CONF1_RX_ON	0x07	/* normal receiver enabled */
+#define ENE_CIR_CONF1_LEARN1	0x08	/* enabled on learning mode */
+#define ENE_CIR_CONF1_TX_ON	0x30	/* enabled on transmit */
+#define ENE_CIR_CONF1_TX_CARR	0x80	/* send TX carrier or not */
+
+#define ENE_CIR_CONF2		0xFEC1	/* unknown setting = 0 */
+#define ENE_CIR_CONF2_LEARN2	0x10	/* set on enable learning */
+#define ENE_CIR_CONF2_GPIO40DIS	0x20	/* disable input via gpio40 */
+
+#define ENE_CIR_SAMPLE_PERIOD	0xFEC8	/* sample period in us */
+#define ENE_CIR_SAMPLE_OVERFLOW	0x80	/* interrupt on overflows if set */
+
+
+/* Two byte tx buffer */
+#define ENE_TX_INPUT1		0xFEC9
+#define ENE_TX_INPUT2		0xFECA
+#define ENE_TX_PULSE_MASK	0x80	/* Transmitted sample is pulse */
+#define ENE_TX_SMLP_MASK	0x7F
+#define ENE_TX_SMPL_PERIOD	50	/* transmit sample period - fixed */
+
+
+/* Unknown TX setting - TX sample period ??? */
+#define ENE_TX_UNK1		0xFECB	/* set to 0x63 */
+
+/* Current received carrier period */
+#define ENE_RX_CARRIER		0xFECC	/* RX period (500 ns) */
+#define ENE_RX_CARRIER_VALID	0x80	/* Register content valid */
+
+
+/* TX period (1/carrier) */
+#define ENE_TX_PERIOD		0xFECE	/* TX period (500 ns) */
+#define ENE_TX_PERIOD_UNKBIT	0x80	/* This bit set on transmit*/
+#define ENE_TX_PERIOD_PULSE	0xFECF	/* TX pulse period (500 ns)*/
+
+/* Hardware versions */
+#define ENE_HW_VERSION		0xFF00	/* hardware revision */
+#define ENE_PLLFRH		0xFF16
+#define ENE_PLLFRL		0xFF17
+
+#define ENE_HW_UNK		0xFF1D
+#define ENE_HW_UNK_CLR		0x04
+#define ENE_HW_VER_MAJOR	0xFF1E	/* chip version */
+#define ENE_HW_VER_MINOR	0xFF1F
+#define ENE_HW_VER_OLD		0xFD00
+
+/* Normal/Learning carrier ranges - only valid if we have learning input*/
+/* TODO: test */
+#define ENE_NORMAL_RX_LOW	34
+#define ENE_NORMAL_RX_HI	38
+
+/* Tx carrier range */
+/* Hardware might be able to do more, but this range is enough for
+   all purposes */
+#define ENE_TX_PERIOD_MAX	32	/* corresponds to 29.4 kHz */
+#define ENE_TX_PERIOD_MIN	16	/* corrsponds to 62.5 kHz */
+
+
+
+/* Minimal and maximal gaps */
+
+/* Normal case:
+	Minimal gap is 0x7F * sample period
+	Maximum gap depends on hardware.
+	For KB3926B, it is unlimited, for newer models its around
+	250000, after which HW stops sending samples, and that is
+	not possible to change */
+
+/* Fan case:
+	Both minimal and maximal gaps are same, and equal to 0xFFF * 0x61
+	And there is nothing to change this setting
+*/
+
+#define ENE_MAXGAP		250000
+#define ENE_MINGAP		(127 * sample_period)
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME		"ene_ir"
+
+#define ENE_IRQ_RX		1
+#define ENE_IRQ_TX		2
+
+#define  ENE_HW_B		1	/* 3926B */
+#define  ENE_HW_C		2	/* 3926C */
+#define  ENE_HW_D		3	/* 3926D */
+
+#define ene_printk(level, text, ...) \
+	printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
+
+#define ene_dbg(text, ...) \
+	if (debug) \
+		printk(KERN_DEBUG \
+			ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+#define ene_dbg_verbose(text, ...) \
+	if (debug > 1) \
+		printk(KERN_DEBUG \
+			ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+
+struct ene_device {
+	struct pnp_dev *pnp_dev;
+	struct input_dev *idev;
+	struct ir_dev_props *props;
+	int in_use;
+
+	/* hw IO settings */
+	unsigned long hw_io;
+	int irq;
+	spinlock_t hw_lock;
+
+	/* HW features */
+	int hw_revision;			/* hardware revision */
+	bool hw_learning_and_tx_capable;	/* learning capable */
+	bool hw_gpio40_learning;		/* gpio40 is learning */
+	bool hw_fan_as_normal_input;		/* fan input is used as */
+						/* regular input */
+	/* HW state*/
+	int rx_pointer;				/* hw pointer to rx buffer */
+	bool rx_fan_input_inuse;		/* is fan input in use for rx*/
+	int tx_reg;				/* current reg used for TX */
+	u8  saved_conf1;			/* saved FEC0 reg */
+
+	/* TX sample handling */
+	unsigned int tx_sample;			/* current sample for TX */
+	bool tx_sample_pulse;			/* current sample is pulse */
+
+	/* TX buffer */
+	int *tx_buffer;				/* input samples buffer*/
+	int tx_pos;				/* position in that bufer */
+	int tx_len;				/* current len of tx buffer */
+	int tx_done;				/* done transmitting */
+						/* one more sample pending*/
+	struct completion tx_complete;		/* TX completion */
+	struct timer_list tx_sim_timer;
+
+	/* TX settings */
+	int tx_period;
+	int tx_duty_cycle;
+	int transmitter_mask;
+
+	/* RX settings */
+	bool learning_enabled;			/* learning input enabled */
+	bool carrier_detect_enabled;		/* carrier detect enabled */
+	int rx_period_adjust;
+};
diff -Naurp linux-2.6.35/drivers/media/IR/imon.c linux-2.6.35.new/drivers/media/IR/imon.c
--- linux-2.6.35/drivers/media/IR/imon.c	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/imon.c	2010-09-09 23:21:42.000000000 -0400
@@ -406,7 +406,7 @@ static int display_close(struct inode *i
 	struct imon_context *ictx = NULL;
 	int retval = 0;
 
-	ictx = (struct imon_context *)file->private_data;
+	ictx = file->private_data;
 
 	if (!ictx) {
 		err("%s: no context for device", __func__);
@@ -811,7 +811,7 @@ static ssize_t vfd_write(struct file *fi
 	const unsigned char vfd_packet6[] = {
 		0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
 
-	ictx = (struct imon_context *)file->private_data;
+	ictx = file->private_data;
 	if (!ictx) {
 		err("%s: no context for device", __func__);
 		return -ENODEV;
@@ -895,7 +895,7 @@ static ssize_t lcd_write(struct file *fi
 	int retval = 0;
 	struct imon_context *ictx;
 
-	ictx = (struct imon_context *)file->private_data;
+	ictx = file->private_data;
 	if (!ictx) {
 		err("%s: no context for device", __func__);
 		return -ENODEV;
diff -Naurp linux-2.6.35/drivers/media/IR/ir-core-priv.h linux-2.6.35.new/drivers/media/IR/ir-core-priv.h
--- linux-2.6.35/drivers/media/IR/ir-core-priv.h	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/ir-core-priv.h	2010-09-09 23:21:49.000000000 -0400
@@ -32,7 +32,7 @@ struct ir_raw_handler {
 
 struct ir_raw_event_ctrl {
 	struct list_head		list;		/* to keep track of raw clients */
-	struct work_struct		rx_work;	/* for the rx decoding workqueue */
+	struct task_struct		*thread;
 	struct kfifo			kfifo;		/* fifo for the pulse/space durations */
 	ktime_t				last_event;	/* when last event occurred */
 	enum raw_event_type		last_type;	/* last event type */
@@ -41,10 +41,13 @@ struct ir_raw_event_ctrl {
 
 	/* raw decoder state follows */
 	struct ir_raw_event prev_ev;
+	struct ir_raw_event this_ev;
 	struct nec_dec {
 		int state;
 		unsigned count;
 		u32 bits;
+		bool is_nec_x;
+		bool necx_repeat;
 	} nec;
 	struct rc5_dec {
 		int state;
@@ -82,7 +85,7 @@ struct ir_raw_event_ctrl {
 	struct lirc_codec {
 		struct ir_input_dev *ir_dev;
 		struct lirc_driver *drv;
-		int lircdata;
+		int carrier_low;
 	} lirc;
 };
 
@@ -110,10 +113,9 @@ static inline void decrease_duration(str
 		ev->duration -= duration;
 }
 
-#define TO_US(duration)			(((duration) + 500) / 1000)
+#define TO_US(duration)			DIV_ROUND_CLOSEST((duration), 1000)
 #define TO_STR(is_pulse)		((is_pulse) ? "pulse" : "space")
 #define IS_RESET(ev)			(ev.duration == 0)
-
 /*
  * Routines from ir-sysfs.c - Meant to be called only internally inside
  * ir-core
@@ -132,7 +134,8 @@ int ir_raw_handler_register(struct ir_ra
 void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_init(void);
 
-
+int ir_rcmap_init(void);
+void ir_rcmap_cleanup(void);
 /*
  * Decoder initialization code
  *
diff -Naurp linux-2.6.35/drivers/media/IR/ir-jvc-decoder.c linux-2.6.35.new/drivers/media/IR/ir-jvc-decoder.c
--- linux-2.6.35/drivers/media/IR/ir-jvc-decoder.c	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/ir-jvc-decoder.c	2010-09-09 23:21:49.000000000 -0400
@@ -32,6 +32,7 @@ enum jvc_state {
 	STATE_BIT_SPACE,
 	STATE_TRAILER_PULSE,
 	STATE_TRAILER_SPACE,
+	STATE_CHECK_REPEAT,
 };
 
 /**
@@ -60,6 +61,7 @@ static int ir_jvc_decode(struct input_de
 	IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n",
 		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
 
+again:
 	switch (data->state) {
 
 	case STATE_INACTIVE:
@@ -149,8 +151,18 @@ static int ir_jvc_decode(struct input_de
 		}
 
 		data->count = 0;
-		data->state = STATE_BIT_PULSE;
+		data->state = STATE_CHECK_REPEAT;
 		return 0;
+
+	case STATE_CHECK_REPEAT:
+		if (!ev.pulse)
+			break;
+
+		if (eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
+			data->state = STATE_INACTIVE;
+  else
+			data->state = STATE_BIT_PULSE;
+		goto again;
 	}
 
 out:
diff -Naurp linux-2.6.35/drivers/media/IR/ir-keytable.c linux-2.6.35.new/drivers/media/IR/ir-keytable.c
--- linux-2.6.35/drivers/media/IR/ir-keytable.c	2010-08-01 18:11:14.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/ir-keytable.c	2010-09-09 23:21:49.000000000 -0400
@@ -339,6 +339,8 @@ void ir_repeat(struct input_dev *dev)
 
 	spin_lock_irqsave(&ir->keylock, flags);
 
+	input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
+
 	if (!ir->keypressed)
 		goto out;
 
@@ -370,6 +372,8 @@ void ir_keydown(struct input_dev *dev, i
 
 	spin_lock_irqsave(&ir->keylock, flags);
 
+	input_event(dev, EV_MSC, MSC_SCAN, scancode);
+
 	/* Repeat event? */
 	if (ir->keypressed &&
 	    ir->last_scancode == scancode &&
@@ -383,9 +387,11 @@ void ir_keydown(struct input_dev *dev, i
 	ir->last_toggle = toggle;
 	ir->last_keycode = keycode;
 
+
 	if (keycode == KEY_RESERVED)
 		goto out;
 
+
 	/* Register a keypress */
 	ir->keypressed = true;
 	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
@@ -428,7 +434,7 @@ static void ir_close(struct input_dev *i
  */
 int __ir_input_register(struct input_dev *input_dev,
 		      const struct ir_scancode_table *rc_tab,
-		      const struct ir_dev_props *props,
+		      struct ir_dev_props *props,
 		      const char *driver_name)
 {
 	struct ir_input_dev *ir_dev;
@@ -480,6 +486,8 @@ int __ir_input_register(struct input_dev
 
 	set_bit(EV_KEY, input_dev->evbit);
 	set_bit(EV_REP, input_dev->evbit);
+	set_bit(EV_MSC, input_dev->evbit);
+	set_bit(MSC_SCAN, input_dev->mscbit);
 
 	if (ir_setkeytable(input_dev, &ir_dev->rc_tab, rc_tab)) {
 		rc = -ENOMEM;
@@ -497,8 +505,10 @@ int __ir_input_register(struct input_dev
 				goto out_event;
 		}
 
-	IR_dprintk(1, "Registered input device on %s for %s remote.\n",
-		   driver_name, rc_tab->name);
+	IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
+		   driver_name, rc_tab->name,
+		   (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
+			" in raw mode" : "");
 
 	return 0;
 
diff -Naurp linux-2.6.35/drivers/media/IR/ir-lirc-codec.c linux-2.6.35.new/drivers/media/IR/ir-lirc-codec.c
--- linux-2.6.35/drivers/media/IR/ir-lirc-codec.c	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/ir-lirc-codec.c	2010-09-09 23:21:49.000000000 -0400
@@ -32,6 +32,7 @@
 static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 {
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	int sample;
 
 	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
 		return 0;
@@ -39,18 +40,20 @@ static int ir_lirc_decode(struct input_d
 	if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
 		return -EINVAL;
 
+	if (IS_RESET(ev))
+		return 0;
+
 	IR_dprintk(2, "LIRC data transfer started (%uus %s)\n",
 		   TO_US(ev.duration), TO_STR(ev.pulse));
 
-	ir_dev->raw->lirc.lircdata += ev.duration / 1000;
+	sample = ev.duration / 1000;
 	if (ev.pulse)
-		ir_dev->raw->lirc.lircdata |= PULSE_BIT;
+		sample |= PULSE_BIT;
 
 	lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
-			  (unsigned char *) &ir_dev->raw->lirc.lircdata);
+			  (unsigned char *) &sample);
 	wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
 
-	ir_dev->raw->lirc.lircdata = 0;
 
 	return 0;
 }
@@ -74,14 +77,9 @@ static ssize_t ir_lirc_transmit_ir(struc
 	if (count > LIRCBUF_SIZE || count % 2 == 0)
 		return -EINVAL;
 
-	txbuf = kzalloc(sizeof(int) * LIRCBUF_SIZE, GFP_KERNEL);
-	if (!txbuf)
-		return -ENOMEM;
-
-	if (copy_from_user(txbuf, buf, n)) {
-		ret = -EFAULT;
-		goto out;
-	}
+	txbuf = memdup_user(buf, n);
+	if (IS_ERR(txbuf))
+		return PTR_ERR(txbuf);
 
 	ir_dev = lirc->ir_dev;
 	if (!ir_dev) {
@@ -97,13 +95,14 @@ out:
 	return ret;
 }
 
-static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
+			unsigned long __user arg)
 {
 	struct lirc_codec *lirc;
 	struct ir_input_dev *ir_dev;
 	int ret = 0;
 	void *drv_data;
-	unsigned long val;
+	unsigned long val = 0;
 
 	lirc = lirc_get_pdata(filep);
 	if (!lirc)
@@ -115,47 +114,106 @@ static long ir_lirc_ioctl(struct file *f
 
 	drv_data = ir_dev->props->priv;
 
-	switch (cmd) {
-	case LIRC_SET_TRANSMITTER_MASK:
+	if (_IOC_DIR(cmd) & _IOC_WRITE) {
 		ret = get_user(val, (unsigned long *)arg);
 		if (ret)
 			return ret;
+	}
+
+	switch (cmd) {
+
+	/* legacy support */
+	case LIRC_GET_SEND_MODE:
+		val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
+		break;
 
-		if (ir_dev->props && ir_dev->props->s_tx_mask)
+	case LIRC_SET_SEND_MODE:
+		if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+			return -EINVAL;
+		break;
+
+	/* TX settings */
+	case LIRC_SET_TRANSMITTER_MASK:
+		if (ir_dev->props->s_tx_mask)
 			ret = ir_dev->props->s_tx_mask(drv_data, (u32)val);
 		else
 			return -EINVAL;
 		break;
 
 	case LIRC_SET_SEND_CARRIER:
-		ret = get_user(val, (unsigned long *)arg);
-		if (ret)
-			return ret;
-
-		if (ir_dev->props && ir_dev->props->s_tx_carrier)
+		if (ir_dev->props->s_tx_carrier)
 			ir_dev->props->s_tx_carrier(drv_data, (u32)val);
 		else
 			return -EINVAL;
 		break;
 
-	case LIRC_GET_SEND_MODE:
-		val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
-		ret = put_user(val, (unsigned long *)arg);
+	case LIRC_SET_SEND_DUTY_CYCLE:
+		if (!ir_dev->props->s_tx_duty_cycle)
+			return -ENOSYS;
+
+		if (val <= 0 || val >= 100)
+			return -EINVAL;
+
+		ir_dev->props->s_tx_duty_cycle(ir_dev->props->priv, val);
 		break;
 
-	case LIRC_SET_SEND_MODE:
-		ret = get_user(val, (unsigned long *)arg);
-		if (ret)
-			return ret;
+	/* RX settings */
+	case LIRC_SET_REC_CARRIER:
+		if (ir_dev->props->s_rx_carrier_range)
+			ret = ir_dev->props->s_rx_carrier_range(
+				ir_dev->props->priv,
+				ir_dev->raw->lirc.carrier_low, val);
+		else
+			return -ENOSYS;
 
-		if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+		if (!ret)
+			ir_dev->raw->lirc.carrier_low = 0;
+		break;
+
+	case LIRC_SET_REC_CARRIER_RANGE:
+		if (val >= 0)
+			ir_dev->raw->lirc.carrier_low = val;
+		break;
+
+
+	case LIRC_GET_REC_RESOLUTION:
+		val = ir_dev->props->rx_resolution;
+		break;
+
+	case LIRC_SET_WIDEBAND_RECEIVER:
+		if (ir_dev->props->s_learning_mode)
+			return ir_dev->props->s_learning_mode(
+				ir_dev->props->priv, !!val);
+		else
+			return -ENOSYS;
+
+	/* Generic timeout support */
+	case LIRC_GET_MIN_TIMEOUT:
+		if (!ir_dev->props->max_timeout)
+			return -ENOSYS;
+		val = ir_dev->props->min_timeout / 1000;
+		break;
+
+	case LIRC_GET_MAX_TIMEOUT:
+		if (!ir_dev->props->max_timeout)
+			return -ENOSYS;
+		val = ir_dev->props->max_timeout / 1000;
+		break;
+
+	case LIRC_SET_REC_TIMEOUT:
+		if (val < ir_dev->props->min_timeout ||
+		    val > ir_dev->props->max_timeout)
 			return -EINVAL;
+		ir_dev->props->timeout = val * 1000;
 		break;
 
 	default:
 		return lirc_dev_fop_ioctl(filep, cmd, arg);
 	}
 
+	if (_IOC_DIR(cmd) & _IOC_READ)
+		ret = put_user(val, (unsigned long *)arg);
+
 	return ret;
 }
 
@@ -192,7 +250,7 @@ static int ir_lirc_register(struct input
 		return rc;
 
 	rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-	if (!drv)
+	if (!rbuf)
 		goto rbuf_alloc_failed;
 
 	rc = lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE);
@@ -201,13 +259,28 @@ static int ir_lirc_register(struct input
 
 	features = LIRC_CAN_REC_MODE2;
 	if (ir_dev->props->tx_ir) {
+
 		features |= LIRC_CAN_SEND_PULSE;
 		if (ir_dev->props->s_tx_mask)
 			features |= LIRC_CAN_SET_TRANSMITTER_MASK;
 		if (ir_dev->props->s_tx_carrier)
 			features |= LIRC_CAN_SET_SEND_CARRIER;
+
+		if (ir_dev->props->s_tx_duty_cycle)
+			features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
 	}
 
+	if (ir_dev->props->s_rx_carrier_range)
+		features |= LIRC_CAN_SET_REC_CARRIER |
+			LIRC_CAN_SET_REC_CARRIER_RANGE;
+
+	if (ir_dev->props->s_learning_mode)
+		features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
+
+	if (ir_dev->props->max_timeout)
+		features |= LIRC_CAN_SET_REC_TIMEOUT;
+
+
 	snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
 		 ir_dev->driver_name);
 	drv->minor = -1;
@@ -229,8 +302,6 @@ static int ir_lirc_register(struct input
 
 	ir_dev->raw->lirc.drv = drv;
 	ir_dev->raw->lirc.ir_dev = ir_dev;
-	ir_dev->raw->lirc.lircdata = PULSE_MASK;
-
 	return 0;
 
 lirc_register_failed:
diff -Naurp linux-2.6.35/drivers/media/IR/ir-nec-decoder.c linux-2.6.35.new/drivers/media/IR/ir-nec-decoder.c
--- linux-2.6.35/drivers/media/IR/ir-nec-decoder.c	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/ir-nec-decoder.c	2010-09-09 23:21:49.000000000 -0400
@@ -20,12 +20,13 @@
 #define NEC_HEADER_PULSE	(16 * NEC_UNIT)
 #define NECX_HEADER_PULSE	(8  * NEC_UNIT) /* Less common NEC variant */
 #define NEC_HEADER_SPACE	(8  * NEC_UNIT)
-#define NEC_REPEAT_SPACE	(8  * NEC_UNIT)
+#define NEC_REPEAT_SPACE	(4  * NEC_UNIT)
 #define NEC_BIT_PULSE		(1  * NEC_UNIT)
 #define NEC_BIT_0_SPACE		(1  * NEC_UNIT)
 #define NEC_BIT_1_SPACE		(3  * NEC_UNIT)
 #define	NEC_TRAILER_PULSE	(1  * NEC_UNIT)
 #define	NEC_TRAILER_SPACE	(10 * NEC_UNIT) /* even longer in reality */
+#define NECX_REPEAT_BITS	1
 
 enum nec_state {
 	STATE_INACTIVE,
@@ -67,8 +68,12 @@ static int ir_nec_decode(struct input_de
 		if (!ev.pulse)
 			break;
 
-		if (!eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2) &&
-		    !eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+		if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2)) {
+			data->is_nec_x = false;
+			data->necx_repeat = false;
+		} else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+			data->is_nec_x = true;
+		else
 			break;
 
 		data->count = 0;
@@ -105,6 +110,17 @@ static int ir_nec_decode(struct input_de
 		if (ev.pulse)
 			break;
 
+		if (data->necx_repeat && data->count == NECX_REPEAT_BITS &&
+			geq_margin(ev.duration,
+			NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
+				IR_dprintk(1, "Repeat last key\n");
+				ir_repeat(input_dev);
+				data->state = STATE_INACTIVE;
+				return 0;
+
+		} else if (data->count > NECX_REPEAT_BITS)
+			data->necx_repeat = false;
+
 		data->bits <<= 1;
 		if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2))
 			data->bits |= 1;
@@ -159,6 +175,9 @@ static int ir_nec_decode(struct input_de
 			IR_dprintk(1, "NEC scancode 0x%04x\n", scancode);
 		}
 
+		if (data->is_nec_x)
+			data->necx_repeat = true;
+
 		ir_keydown(input_dev, scancode, 0);
 		data->state = STATE_INACTIVE;
 		return 0;
diff -Naurp linux-2.6.35/drivers/media/IR/ir-raw-event.c linux-2.6.35.new/drivers/media/IR/ir-raw-event.c
--- linux-2.6.35/drivers/media/IR/ir-raw-event.c	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/ir-raw-event.c	2010-09-09 23:21:49.000000000 -0400
@@ -12,9 +12,10 @@
  *  GNU General Public License for more details.
  */
 
-#include <linux/workqueue.h>
-#include <linux/spinlock.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
 #include <linux/sched.h>
+#include <linux/freezer.h>
 #include "ir-core-priv.h"
 
 /* Define the max number of pulse/space transitions to buffer */
@@ -24,7 +25,7 @@
 static LIST_HEAD(ir_raw_client_list);
 
 /* Used to handle IR raw handler extensions */
-static DEFINE_SPINLOCK(ir_raw_handler_lock);
+static DEFINE_MUTEX(ir_raw_handler_lock);
 static LIST_HEAD(ir_raw_handler_list);
 static u64 available_protocols;
 
@@ -33,20 +34,30 @@ static u64 available_protocols;
 static struct work_struct wq_load;
 #endif
 
-static void ir_raw_event_work(struct work_struct *work)
+static int ir_raw_event_thread(void *data)
 {
 	struct ir_raw_event ev;
 	struct ir_raw_handler *handler;
-	struct ir_raw_event_ctrl *raw =
-		container_of(work, struct ir_raw_event_ctrl, rx_work);
+	struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
 
-	while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
-		spin_lock(&ir_raw_handler_lock);
-		list_for_each_entry(handler, &ir_raw_handler_list, list)
-			handler->decode(raw->input_dev, ev);
-		spin_unlock(&ir_raw_handler_lock);
-		raw->prev_ev = ev;
+	while (!kthread_should_stop()) {
+		try_to_freeze();
+
+		mutex_lock(&ir_raw_handler_lock);
+
+		while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
+			list_for_each_entry(handler, &ir_raw_handler_list, list)
+				handler->decode(raw->input_dev, ev);
+			raw->prev_ev = ev;
+		}
+
+		mutex_unlock(&ir_raw_handler_lock);
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule();
 	}
+
+	return 0;
 }
 
 /**
@@ -66,6 +77,9 @@ int ir_raw_event_store(struct input_dev 
 	if (!ir->raw)
 		return -EINVAL;
 
+	IR_dprintk(2, "sample: (05%dus %s)\n",
+		TO_US(ev->duration), TO_STR(ev->pulse));
+
 	if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
 		return -ENOMEM;
 
@@ -126,6 +140,90 @@ int ir_raw_event_store_edge(struct input
 EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
 
 /**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev:	the struct input_dev device descriptor
+ * @type:	the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+						struct ir_raw_event *ev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+
+	if (!raw || !ir->props)
+		return -EINVAL;
+
+	/* Ignore spaces in idle mode */
+	if (ir->idle && !ev->pulse)
+		return 0;
+	else if (ir->idle)
+		ir_raw_event_set_idle(input_dev, 0);
+
+	if (!raw->this_ev.duration) {
+		raw->this_ev = *ev;
+	} else if (ev->pulse == raw->this_ev.pulse) {
+		raw->this_ev.duration += ev->duration;
+	} else {
+		ir_raw_event_store(input_dev, &raw->this_ev);
+		raw->this_ev = *ev;
+	}
+
+	/* Enter idle mode if nessesary */
+	if (!ev->pulse && ir->props->timeout &&
+		raw->this_ev.duration >= ir->props->timeout)
+		ir_raw_event_set_idle(input_dev, 1);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+	ktime_t now;
+	u64 delta;
+
+	if (!ir->props)
+		return;
+
+	if (!ir->raw)
+		goto out;
+
+	if (idle) {
+		IR_dprintk(2, "enter idle mode\n");
+		raw->last_event = ktime_get();
+	} else {
+		IR_dprintk(2, "exit idle mode\n");
+
+		now = ktime_get();
+		delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+		WARN_ON(raw->this_ev.pulse);
+
+		raw->this_ev.duration =
+			min(raw->this_ev.duration + delta,
+						(u64)IR_MAX_DURATION);
+
+		ir_raw_event_store(input_dev, &raw->this_ev);
+
+		if (raw->this_ev.duration == IR_MAX_DURATION)
+			ir_raw_event_reset(input_dev);
+
+		raw->this_ev.duration = 0;
+	}
+out:
+	if (ir->props->s_idle)
+		ir->props->s_idle(ir->props->priv, idle);
+	ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
+/**
  * ir_raw_event_handle() - schedules the decoding of stored ir data
  * @input_dev:	the struct input_dev device descriptor
  *
@@ -138,7 +236,7 @@ void ir_raw_event_handle(struct input_de
 	if (!ir->raw)
 		return;
 
-	schedule_work(&ir->raw->rx_work);
+	wake_up_process(ir->raw->thread);
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_handle);
 
@@ -147,9 +245,9 @@ u64
 ir_raw_get_allowed_protocols()
 {
 	u64 protocols;
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	protocols = available_protocols;
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 	return protocols;
 }
 
@@ -167,7 +265,7 @@ int ir_raw_event_register(struct input_d
 		return -ENOMEM;
 
 	ir->raw->input_dev = input_dev;
-	INIT_WORK(&ir->raw->rx_work, ir_raw_event_work);
+
 	ir->raw->enabled_protocols = ~0;
 	rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
 			 GFP_KERNEL);
@@ -177,12 +275,23 @@ int ir_raw_event_register(struct input_d
 		return rc;
 	}
 
-	spin_lock(&ir_raw_handler_lock);
+	ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
+			"rc%u",  (unsigned int)ir->devno);
+
+	if (IS_ERR(ir->raw->thread)) {
+		int ret = PTR_ERR(ir->raw->thread);
+
+		kfree(ir->raw);
+		ir->raw = NULL;
+		return ret;
+	}
+
+	mutex_lock(&ir_raw_handler_lock);
 	list_add_tail(&ir->raw->list, &ir_raw_client_list);
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
 		if (handler->raw_register)
 			handler->raw_register(ir->raw->input_dev);
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 
 	return 0;
 }
@@ -195,14 +304,14 @@ void ir_raw_event_unregister(struct inpu
 	if (!ir->raw)
 		return;
 
-	cancel_work_sync(&ir->raw->rx_work);
+	kthread_stop(ir->raw->thread);
 
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	list_del(&ir->raw->list);
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
 		if (handler->raw_unregister)
 			handler->raw_unregister(ir->raw->input_dev);
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 
 	kfifo_free(&ir->raw->kfifo);
 	kfree(ir->raw);
@@ -217,13 +326,13 @@ int ir_raw_handler_register(struct ir_ra
 {
 	struct ir_raw_event_ctrl *raw;
 
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
 	if (ir_raw_handler->raw_register)
 		list_for_each_entry(raw, &ir_raw_client_list, list)
 			ir_raw_handler->raw_register(raw->input_dev);
 	available_protocols |= ir_raw_handler->protocols;
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 
 	return 0;
 }
@@ -233,13 +342,13 @@ void ir_raw_handler_unregister(struct ir
 {
 	struct ir_raw_event_ctrl *raw;
 
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	list_del(&ir_raw_handler->list);
 	if (ir_raw_handler->raw_unregister)
 		list_for_each_entry(raw, &ir_raw_client_list, list)
 			ir_raw_handler->raw_unregister(raw->input_dev);
 	available_protocols &= ~ir_raw_handler->protocols;
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 }
 EXPORT_SYMBOL(ir_raw_handler_unregister);
 
diff -Naurp linux-2.6.35/drivers/media/IR/ir-sysfs.c linux-2.6.35.new/drivers/media/IR/ir-sysfs.c
--- linux-2.6.35/drivers/media/IR/ir-sysfs.c	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/ir-sysfs.c	2010-09-09 23:21:49.000000000 -0400
@@ -33,6 +33,22 @@ static struct class ir_input_class = {
 	.devnode	= ir_devnode,
 };
 
+static struct {
+	u64	type;
+	char	*name;
+} proto_names[] = {
+	{ IR_TYPE_UNKNOWN,	"unknown"	},
+	{ IR_TYPE_RC5,		"rc-5"		},
+	{ IR_TYPE_NEC,		"nec"		},
+	{ IR_TYPE_RC6,		"rc-6"		},
+	{ IR_TYPE_JVC,		"jvc"		},
+	{ IR_TYPE_SONY,		"sony"		},
+	{ IR_TYPE_RC5_SZ,	"rc-5-sz"	},
+	{ IR_TYPE_LIRC,		"lirc"		},
+};
+
+#define PROTO_NONE	"none"
+
 /**
  * show_protocols() - shows the current IR protocol(s)
  * @d:		the device descriptor
@@ -50,6 +66,7 @@ static ssize_t show_protocols(struct dev
 	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
 	u64 allowed, enabled;
 	char *tmp = buf;
+	int i;
 
 	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
 		enabled = ir_dev->rc_tab.ir_type;
@@ -63,45 +80,12 @@ static ssize_t show_protocols(struct dev
 		   (long long)allowed,
 		   (long long)enabled);
 
-	if (allowed & enabled & IR_TYPE_UNKNOWN)
-		tmp += sprintf(tmp, "[unknown] ");
-	else if (allowed & IR_TYPE_UNKNOWN)
-		tmp += sprintf(tmp, "unknown ");
-
-	if (allowed & enabled & IR_TYPE_RC5)
-		tmp += sprintf(tmp, "[rc5] ");
-	else if (allowed & IR_TYPE_RC5)
-		tmp += sprintf(tmp, "rc5 ");
-
-	if (allowed & enabled & IR_TYPE_NEC)
-		tmp += sprintf(tmp, "[nec] ");
-	else if (allowed & IR_TYPE_NEC)
-		tmp += sprintf(tmp, "nec ");
-
-	if (allowed & enabled & IR_TYPE_RC6)
-		tmp += sprintf(tmp, "[rc6] ");
-	else if (allowed & IR_TYPE_RC6)
-		tmp += sprintf(tmp, "rc6 ");
-
-	if (allowed & enabled & IR_TYPE_JVC)
-		tmp += sprintf(tmp, "[jvc] ");
-	else if (allowed & IR_TYPE_JVC)
-		tmp += sprintf(tmp, "jvc ");
-
-	if (allowed & enabled & IR_TYPE_SONY)
-		tmp += sprintf(tmp, "[sony] ");
-	else if (allowed & IR_TYPE_SONY)
-		tmp += sprintf(tmp, "sony ");
-
-	if (allowed & enabled & IR_TYPE_RC5_SZ)
-		tmp += sprintf(tmp, "[rc5sz] ");
-	else if (allowed & IR_TYPE_RC5_SZ)
-		tmp += sprintf(tmp, "rc5sz ");
-
-	if (allowed & enabled & IR_TYPE_LIRC)
-		tmp += sprintf(tmp, "[lirc] ");
-	else if (allowed & IR_TYPE_LIRC)
-		tmp += sprintf(tmp, "lirc ");
+	for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+		if (allowed & enabled & proto_names[i].type)
+			tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
+		else if (allowed & proto_names[i].type)
+			tmp += sprintf(tmp, "%s ", proto_names[i].name);
+	}
 
 	if (tmp != buf)
 		tmp--;
@@ -121,6 +105,7 @@ static ssize_t show_protocols(struct dev
  * Writing "+proto" will add a protocol to the list of enabled protocols.
  * Writing "-proto" will remove a protocol from the list of enabled protocols.
  * Writing "proto" will enable only "proto".
+ * Writing "none" will disable all protocols.
  * Returns -EINVAL if an invalid protocol combination or unknown protocol name
  * is used, otherwise @len.
  */
@@ -134,71 +119,63 @@ static ssize_t store_protocols(struct de
 	const char *tmp;
 	u64 type;
 	u64 mask;
-	int rc;
+	int rc, i, count = 0;
 	unsigned long flags;
 
-	tmp = skip_spaces(data);
+	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+		type = ir_dev->rc_tab.ir_type;
+	else
+		type = ir_dev->raw->enabled_protocols;
 
-	if (*tmp == '+') {
-		enable = true;
-		disable = false;
-		tmp++;
-	} else if (*tmp == '-') {
-		enable = false;
-		disable = true;
-		tmp++;
-	} else {
-		enable = false;
-		disable = false;
-	}
+	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
+		if (!*tmp)
+			break;
+
+		if (*tmp == '+') {
+			enable = true;
+			disable = false;
+			tmp++;
+		} else if (*tmp == '-') {
+			enable = false;
+			disable = true;
+			tmp++;
+		} else {
+			enable = false;
+			disable = false;
+		}
 
-	if (!strncasecmp(tmp, "unknown", 7)) {
-		tmp += 7;
-		mask = IR_TYPE_UNKNOWN;
-	} else if (!strncasecmp(tmp, "rc5", 3)) {
-		tmp += 3;
-		mask = IR_TYPE_RC5;
-	} else if (!strncasecmp(tmp, "nec", 3)) {
-		tmp += 3;
-		mask = IR_TYPE_NEC;
-	} else if (!strncasecmp(tmp, "rc6", 3)) {
-		tmp += 3;
-		mask = IR_TYPE_RC6;
-	} else if (!strncasecmp(tmp, "jvc", 3)) {
-		tmp += 3;
-		mask = IR_TYPE_JVC;
-	} else if (!strncasecmp(tmp, "sony", 4)) {
-		tmp += 4;
-		mask = IR_TYPE_SONY;
-	} else if (!strncasecmp(tmp, "rc5sz", 5)) {
-		tmp += 5;
-		mask = IR_TYPE_RC5_SZ;
-	} else if (!strncasecmp(tmp, "lirc", 4)) {
-		tmp += 4;
-		mask = IR_TYPE_LIRC;
-	} else {
-		IR_dprintk(1, "Unknown protocol\n");
-		return -EINVAL;
+		if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
+			tmp += sizeof(PROTO_NONE);
+			mask = 0;
+			count++;
+		} else {
+			for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+				if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
+					tmp += strlen(proto_names[i].name);
+					mask = proto_names[i].type;
+					break;
+				}
+			}
+			if (i == ARRAY_SIZE(proto_names)) {
+				IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
+				return -EINVAL;
+			}
+			count++;
+		}
+
+		if (enable)
+			type |= mask;
+		else if (disable)
+			type &= ~mask;
+		else
+			type = mask;
 	}
 
-	tmp = skip_spaces(tmp);
-	if (*tmp != '\0') {
-		IR_dprintk(1, "Invalid trailing characters\n");
+	if (!count) {
+		IR_dprintk(1, "Protocol not specified\n");
 		return -EINVAL;
 	}
 
-	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
-		type = ir_dev->rc_tab.ir_type;
-	else
-		type = ir_dev->raw->enabled_protocols;
-
-	if (enable)
-		type |= mask;
-	else if (disable)
-		type &= ~mask;
-	else
-		type = mask;
-
 	if (ir_dev->props && ir_dev->props->change_protocol) {
 		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
 						    type);
@@ -217,7 +194,6 @@ static ssize_t store_protocols(struct de
 		ir_dev->raw->enabled_protocols = type;
 	}
 
-
 	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
 		   (long long)type);
 
@@ -286,6 +262,7 @@ int ir_register_class(struct input_dev *
 		return devno;
 
 	ir_dev->dev.type = &rc_dev_type;
+
 	ir_dev->dev.class = &ir_input_class;
 	ir_dev->dev.parent = input_dev->dev.parent;
 	dev_set_name(&ir_dev->dev, "rc%d", devno);
@@ -349,6 +326,7 @@ static int __init ir_core_init(void)
 
 	/* Initialize/load the decoders/keymap code that will be used */
 	ir_raw_init();
+	ir_rcmap_init();
 
 	return 0;
 }
@@ -356,6 +334,7 @@ static int __init ir_core_init(void)
 static void __exit ir_core_exit(void)
 {
 	class_unregister(&ir_input_class);
+	ir_rcmap_cleanup();
 }
 
 module_init(ir_core_init);
diff -Naurp linux-2.6.35/drivers/media/IR/Kconfig linux-2.6.35.new/drivers/media/IR/Kconfig
--- linux-2.6.35/drivers/media/IR/Kconfig	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/Kconfig	2010-09-09 23:21:49.000000000 -0400
@@ -1,13 +1,22 @@
-config IR_CORE
-	tristate
+menuconfig IR_CORE
+	tristate "Infrared remote controller adapters"
 	depends on INPUT
 	default INPUT
+	---help---
+	  Enable support for Remote Controllers on Linux. This is
+	  needed in order to support several video capture adapters.
+
+	  Enable this option if you have a video capture board even
+	  if you don't need IR, as otherwise, you may not be able to
+	  compile the driver for your adapter.
 
 config VIDEO_IR
 	tristate
 	depends on IR_CORE
 	default IR_CORE
 
+if IR_CORE
+
 config LIRC
 	tristate
 	default y
@@ -16,7 +25,7 @@ config LIRC
 	   Enable this option to build the Linux Infrared Remote
 	   Control (LIRC) core device interface driver. The LIRC
 	   interface passes raw IR to and from userspace, where the
-	   LIRC daemon handles protocol decoding for IR reception ann
+	   LIRC daemon handles protocol decoding for IR reception and
 	   encoding for IR transmitting (aka "blasting").
 
 source "drivers/media/IR/keymaps/Kconfig"
@@ -44,6 +53,7 @@ config IR_RC5_DECODER
 config IR_RC6_DECODER
 	tristate "Enable IR raw decoder for the RC6 protocol"
 	depends on IR_CORE
+	select BITREVERSE
 	default y
 
 	---help---
@@ -77,7 +87,9 @@ config IR_RC5_SZ_DECODER
 
 	---help---
 	   Enable this option if you have IR with RC-5 (streamzap) protocol,
-	   and if the IR is decoded in software.
+	   and if the IR is decoded in software. (The Streamzap PC Remote
+	   uses an IR protocol that is almost standard RC-5, but not quite,
+	   as it uses an additional bit).
 
 config IR_LIRC_CODEC
 	tristate "Enable IR to LIRC bridge"
@@ -113,6 +125,20 @@ config IR_MCEUSB
 	   To compile this driver as a module, choose M here: the
 	   module will be called mceusb.
 
+config IR_ENE
+	tristate "ENE eHome Receiver/Transciever (pnp id: ENE0100/ENE02xxx)"
+	depends on PNP
+	depends on IR_CORE
+	---help---
+	   Say Y here to enable support for integrated infrared receiver
+	   /transciever made by ENE.
+
+	   You can see if you have it by looking at lspnp output.
+	   Output should include ENE0100 ENE0200 or something similiar.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called ene_ir.
+
 config IR_STREAMZAP
 	tristate "Streamzap PC Remote IR Receiver"
 	depends on USB_ARCH_HAS_HCD
@@ -124,3 +150,5 @@ config IR_STREAMZAP
 
 	   To compile this driver as a module, choose M here: the
 	   module will be called streamzap.
+
+endif #IR_CORE
diff -Naurp linux-2.6.35/drivers/media/IR/keymaps/Makefile linux-2.6.35.new/drivers/media/IR/keymaps/Makefile
--- linux-2.6.35/drivers/media/IR/keymaps/Makefile	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/keymaps/Makefile	2010-09-09 23:21:42.000000000 -0400
@@ -14,10 +14,11 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t
 			rc-budget-ci-old.o \
 			rc-cinergy-1400.o \
 			rc-cinergy.o \
+			rc-dib0700-nec.o \
+			rc-dib0700-rc5.o \
 			rc-dm1105-nec.o \
 			rc-dntv-live-dvb-t.o \
 			rc-dntv-live-dvbt-pro.o \
-			rc-empty.o \
 			rc-em-terratec.o \
 			rc-encore-enltv2.o \
 			rc-encore-enltv.o \
diff -Naurp linux-2.6.35/drivers/media/IR/keymaps/rc-dib0700-nec.c linux-2.6.35.new/drivers/media/IR/keymaps/rc-dib0700-nec.c
--- linux-2.6.35/drivers/media/IR/keymaps/rc-dib0700-nec.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.35.new/drivers/media/IR/keymaps/rc-dib0700-nec.c	2010-09-09 23:21:42.000000000 -0400
@@ -0,0 +1,124 @@
+/* rc-dvb0700-big.c - Keytable for devices in dvb0700
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * TODO: This table is a real mess, as it merges RC codes from several
+ * devices into a big table. It also has both RC-5 and NEC codes inside.
+ * It should be broken into small tables, and the protocols should properly
+ * be indentificated.
+ *
+ * The table were imported from dib0700_devices.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode dib0700_nec_table[] = {
+	/* Key codes for the Pixelview SBTVD remote */
+	{ 0x8613, KEY_MUTE },
+	{ 0x8612, KEY_POWER },
+	{ 0x8601, KEY_1 },
+	{ 0x8602, KEY_2 },
+	{ 0x8603, KEY_3 },
+	{ 0x8604, KEY_4 },
+	{ 0x8605, KEY_5 },
+	{ 0x8606, KEY_6 },
+	{ 0x8607, KEY_7 },
+	{ 0x8608, KEY_8 },
+	{ 0x8609, KEY_9 },
+	{ 0x8600, KEY_0 },
+	{ 0x860d, KEY_CHANNELUP },
+	{ 0x8619, KEY_CHANNELDOWN },
+	{ 0x8610, KEY_VOLUMEUP },
+	{ 0x860c, KEY_VOLUMEDOWN },
+
+	{ 0x860a, KEY_CAMERA },
+	{ 0x860b, KEY_ZOOM },
+	{ 0x861b, KEY_BACKSPACE },
+	{ 0x8615, KEY_ENTER },
+
+	{ 0x861d, KEY_UP },
+	{ 0x861e, KEY_DOWN },
+	{ 0x860e, KEY_LEFT },
+	{ 0x860f, KEY_RIGHT },
+
+	{ 0x8618, KEY_RECORD },
+	{ 0x861a, KEY_STOP },
+
+	/* Key codes for the EvolutePC TVWay+ remote */
+	{ 0x7a00, KEY_MENU },
+	{ 0x7a01, KEY_RECORD },
+	{ 0x7a02, KEY_PLAY },
+	{ 0x7a03, KEY_STOP },
+	{ 0x7a10, KEY_CHANNELUP },
+	{ 0x7a11, KEY_CHANNELDOWN },
+	{ 0x7a12, KEY_VOLUMEUP },
+	{ 0x7a13, KEY_VOLUMEDOWN },
+	{ 0x7a40, KEY_POWER },
+	{ 0x7a41, KEY_MUTE },
+
+	/* Key codes for the Elgato EyeTV Diversity silver remote */
+	{ 0x4501, KEY_POWER },
+	{ 0x4502, KEY_MUTE },
+	{ 0x4503, KEY_1 },
+	{ 0x4504, KEY_2 },
+	{ 0x4505, KEY_3 },
+	{ 0x4506, KEY_4 },
+	{ 0x4507, KEY_5 },
+	{ 0x4508, KEY_6 },
+	{ 0x4509, KEY_7 },
+	{ 0x450a, KEY_8 },
+	{ 0x450b, KEY_9 },
+	{ 0x450c, KEY_LAST },
+	{ 0x450d, KEY_0 },
+	{ 0x450e, KEY_ENTER },
+	{ 0x450f, KEY_RED },
+	{ 0x4510, KEY_CHANNELUP },
+	{ 0x4511, KEY_GREEN },
+	{ 0x4512, KEY_VOLUMEDOWN },
+	{ 0x4513, KEY_OK },
+	{ 0x4514, KEY_VOLUMEUP },
+	{ 0x4515, KEY_YELLOW },
+	{ 0x4516, KEY_CHANNELDOWN },
+	{ 0x4517, KEY_BLUE },
+	{ 0x4518, KEY_LEFT }, /* Skip backwards */
+	{ 0x4519, KEY_PLAYPAUSE },
+	{ 0x451a, KEY_RIGHT }, /* Skip forward */
+	{ 0x451b, KEY_REWIND },
+	{ 0x451c, KEY_L }, /* Live */
+	{ 0x451d, KEY_FASTFORWARD },
+	{ 0x451e, KEY_STOP }, /* 'Reveal' for Teletext */
+	{ 0x451f, KEY_MENU }, /* KEY_TEXT for Teletext */
+	{ 0x4540, KEY_RECORD }, /* Font 'Size' for Teletext */
+	{ 0x4541, KEY_SCREEN }, /*  Full screen toggle, 'Hold' for Teletext */
+	{ 0x4542, KEY_SELECT }, /* Select video input, 'Select' for Teletext */
+};
+
+static struct rc_keymap dib0700_nec_map = {
+	.map = {
+		.scan    = dib0700_nec_table,
+		.size    = ARRAY_SIZE(dib0700_nec_table),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_DIB0700_NEC_TABLE,
+	}
+};
+
+static int __init init_rc_map(void)
+{
+	return ir_register_map(&dib0700_nec_map);
+}
+
+static void __exit exit_rc_map(void)
+{
+	ir_unregister_map(&dib0700_nec_map);
+}
+
+module_init(init_rc_map)
+module_exit(exit_rc_map)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff -Naurp linux-2.6.35/drivers/media/IR/keymaps/rc-dib0700-rc5.c linux-2.6.35.new/drivers/media/IR/keymaps/rc-dib0700-rc5.c
--- linux-2.6.35/drivers/media/IR/keymaps/rc-dib0700-rc5.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.35.new/drivers/media/IR/keymaps/rc-dib0700-rc5.c	2010-09-09 23:21:42.000000000 -0400
@@ -0,0 +1,235 @@
+/* rc-dvb0700-big.c - Keytable for devices in dvb0700
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * TODO: This table is a real mess, as it merges RC codes from several
+ * devices into a big table. It also has both RC-5 and NEC codes inside.
+ * It should be broken into small tables, and the protocols should properly
+ * be indentificated.
+ *
+ * The table were imported from dib0700_devices.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode dib0700_rc5_table[] = {
+	/* Key codes for the tiny Pinnacle remote*/
+	{ 0x0700, KEY_MUTE },
+	{ 0x0701, KEY_MENU }, /* Pinnacle logo */
+	{ 0x0739, KEY_POWER },
+	{ 0x0703, KEY_VOLUMEUP },
+	{ 0x0709, KEY_VOLUMEDOWN },
+	{ 0x0706, KEY_CHANNELUP },
+	{ 0x070c, KEY_CHANNELDOWN },
+	{ 0x070f, KEY_1 },
+	{ 0x0715, KEY_2 },
+	{ 0x0710, KEY_3 },
+	{ 0x0718, KEY_4 },
+	{ 0x071b, KEY_5 },
+	{ 0x071e, KEY_6 },
+	{ 0x0711, KEY_7 },
+	{ 0x0721, KEY_8 },
+	{ 0x0712, KEY_9 },
+	{ 0x0727, KEY_0 },
+	{ 0x0724, KEY_SCREEN }, /* 'Square' key */
+	{ 0x072a, KEY_TEXT },   /* 'T' key */
+	{ 0x072d, KEY_REWIND },
+	{ 0x0730, KEY_PLAY },
+	{ 0x0733, KEY_FASTFORWARD },
+	{ 0x0736, KEY_RECORD },
+	{ 0x073c, KEY_STOP },
+	{ 0x073f, KEY_CANCEL }, /* '?' key */
+
+	/* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */
+	{ 0xeb01, KEY_POWER },
+	{ 0xeb02, KEY_1 },
+	{ 0xeb03, KEY_2 },
+	{ 0xeb04, KEY_3 },
+	{ 0xeb05, KEY_4 },
+	{ 0xeb06, KEY_5 },
+	{ 0xeb07, KEY_6 },
+	{ 0xeb08, KEY_7 },
+	{ 0xeb09, KEY_8 },
+	{ 0xeb0a, KEY_9 },
+	{ 0xeb0b, KEY_VIDEO },
+	{ 0xeb0c, KEY_0 },
+	{ 0xeb0d, KEY_REFRESH },
+	{ 0xeb0f, KEY_EPG },
+	{ 0xeb10, KEY_UP },
+	{ 0xeb11, KEY_LEFT },
+	{ 0xeb12, KEY_OK },
+	{ 0xeb13, KEY_RIGHT },
+	{ 0xeb14, KEY_DOWN },
+	{ 0xeb16, KEY_INFO },
+	{ 0xeb17, KEY_RED },
+	{ 0xeb18, KEY_GREEN },
+	{ 0xeb19, KEY_YELLOW },
+	{ 0xeb1a, KEY_BLUE },
+	{ 0xeb1b, KEY_CHANNELUP },
+	{ 0xeb1c, KEY_VOLUMEUP },
+	{ 0xeb1d, KEY_MUTE },
+	{ 0xeb1e, KEY_VOLUMEDOWN },
+	{ 0xeb1f, KEY_CHANNELDOWN },
+	{ 0xeb40, KEY_PAUSE },
+	{ 0xeb41, KEY_HOME },
+	{ 0xeb42, KEY_MENU }, /* DVD Menu */
+	{ 0xeb43, KEY_SUBTITLE },
+	{ 0xeb44, KEY_TEXT }, /* Teletext */
+	{ 0xeb45, KEY_DELETE },
+	{ 0xeb46, KEY_TV },
+	{ 0xeb47, KEY_DVD },
+	{ 0xeb48, KEY_STOP },
+	{ 0xeb49, KEY_VIDEO },
+	{ 0xeb4a, KEY_AUDIO }, /* Music */
+	{ 0xeb4b, KEY_SCREEN }, /* Pic */
+	{ 0xeb4c, KEY_PLAY },
+	{ 0xeb4d, KEY_BACK },
+	{ 0xeb4e, KEY_REWIND },
+	{ 0xeb4f, KEY_FASTFORWARD },
+	{ 0xeb54, KEY_PREVIOUS },
+	{ 0xeb58, KEY_RECORD },
+	{ 0xeb5c, KEY_NEXT },
+
+	/* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */
+	{ 0x1e00, KEY_0 },
+	{ 0x1e01, KEY_1 },
+	{ 0x1e02, KEY_2 },
+	{ 0x1e03, KEY_3 },
+	{ 0x1e04, KEY_4 },
+	{ 0x1e05, KEY_5 },
+	{ 0x1e06, KEY_6 },
+	{ 0x1e07, KEY_7 },
+	{ 0x1e08, KEY_8 },
+	{ 0x1e09, KEY_9 },
+	{ 0x1e0a, KEY_KPASTERISK },
+	{ 0x1e0b, KEY_RED },
+	{ 0x1e0c, KEY_RADIO },
+	{ 0x1e0d, KEY_MENU },
+	{ 0x1e0e, KEY_GRAVE }, /* # */
+	{ 0x1e0f, KEY_MUTE },
+	{ 0x1e10, KEY_VOLUMEUP },
+	{ 0x1e11, KEY_VOLUMEDOWN },
+	{ 0x1e12, KEY_CHANNEL },
+	{ 0x1e14, KEY_UP },
+	{ 0x1e15, KEY_DOWN },
+	{ 0x1e16, KEY_LEFT },
+	{ 0x1e17, KEY_RIGHT },
+	{ 0x1e18, KEY_VIDEO },
+	{ 0x1e19, KEY_AUDIO },
+	{ 0x1e1a, KEY_MEDIA },
+	{ 0x1e1b, KEY_EPG },
+	{ 0x1e1c, KEY_TV },
+	{ 0x1e1e, KEY_NEXT },
+	{ 0x1e1f, KEY_BACK },
+	{ 0x1e20, KEY_CHANNELUP },
+	{ 0x1e21, KEY_CHANNELDOWN },
+	{ 0x1e24, KEY_LAST }, /* Skip backwards */
+	{ 0x1e25, KEY_OK },
+	{ 0x1e29, KEY_BLUE},
+	{ 0x1e2e, KEY_GREEN },
+	{ 0x1e30, KEY_PAUSE },
+	{ 0x1e32, KEY_REWIND },
+	{ 0x1e34, KEY_FASTFORWARD },
+	{ 0x1e35, KEY_PLAY },
+	{ 0x1e36, KEY_STOP },
+	{ 0x1e37, KEY_RECORD },
+	{ 0x1e38, KEY_YELLOW },
+	{ 0x1e3b, KEY_GOTO },
+	{ 0x1e3d, KEY_POWER },
+
+	/* Key codes for the Leadtek Winfast DTV Dongle */
+	{ 0x0042, KEY_POWER },
+	{ 0x077c, KEY_TUNER },
+	{ 0x0f4e, KEY_PRINT }, /* PREVIEW */
+	{ 0x0840, KEY_SCREEN }, /* full screen toggle*/
+	{ 0x0f71, KEY_DOT }, /* frequency */
+	{ 0x0743, KEY_0 },
+	{ 0x0c41, KEY_1 },
+	{ 0x0443, KEY_2 },
+	{ 0x0b7f, KEY_3 },
+	{ 0x0e41, KEY_4 },
+	{ 0x0643, KEY_5 },
+	{ 0x097f, KEY_6 },
+	{ 0x0d7e, KEY_7 },
+	{ 0x057c, KEY_8 },
+	{ 0x0a40, KEY_9 },
+	{ 0x0e4e, KEY_CLEAR },
+	{ 0x047c, KEY_CHANNEL }, /* show channel number */
+	{ 0x0f41, KEY_LAST }, /* recall */
+	{ 0x0342, KEY_MUTE },
+	{ 0x064c, KEY_RESERVED }, /* PIP button*/
+	{ 0x0172, KEY_SHUFFLE }, /* SNAPSHOT */
+	{ 0x0c4e, KEY_PLAYPAUSE }, /* TIMESHIFT */
+	{ 0x0b70, KEY_RECORD },
+	{ 0x037d, KEY_VOLUMEUP },
+	{ 0x017d, KEY_VOLUMEDOWN },
+	{ 0x0242, KEY_CHANNELUP },
+	{ 0x007d, KEY_CHANNELDOWN },
+
+	/* Key codes for Nova-TD "credit card" remote control. */
+	{ 0x1d00, KEY_0 },
+	{ 0x1d01, KEY_1 },
+	{ 0x1d02, KEY_2 },
+	{ 0x1d03, KEY_3 },
+	{ 0x1d04, KEY_4 },
+	{ 0x1d05, KEY_5 },
+	{ 0x1d06, KEY_6 },
+	{ 0x1d07, KEY_7 },
+	{ 0x1d08, KEY_8 },
+	{ 0x1d09, KEY_9 },
+	{ 0x1d0a, KEY_TEXT },
+	{ 0x1d0d, KEY_MENU },
+	{ 0x1d0f, KEY_MUTE },
+	{ 0x1d10, KEY_VOLUMEUP },
+	{ 0x1d11, KEY_VOLUMEDOWN },
+	{ 0x1d12, KEY_CHANNEL },
+	{ 0x1d14, KEY_UP },
+	{ 0x1d15, KEY_DOWN },
+	{ 0x1d16, KEY_LEFT },
+	{ 0x1d17, KEY_RIGHT },
+	{ 0x1d1c, KEY_TV },
+	{ 0x1d1e, KEY_NEXT },
+	{ 0x1d1f, KEY_BACK },
+	{ 0x1d20, KEY_CHANNELUP },
+	{ 0x1d21, KEY_CHANNELDOWN },
+	{ 0x1d24, KEY_LAST },
+	{ 0x1d25, KEY_OK },
+	{ 0x1d30, KEY_PAUSE },
+	{ 0x1d32, KEY_REWIND },
+	{ 0x1d34, KEY_FASTFORWARD },
+	{ 0x1d35, KEY_PLAY },
+	{ 0x1d36, KEY_STOP },
+	{ 0x1d37, KEY_RECORD },
+	{ 0x1d3b, KEY_GOTO },
+	{ 0x1d3d, KEY_POWER },
+};
+
+static struct rc_keymap dib0700_rc5_map = {
+	.map = {
+		.scan    = dib0700_rc5_table,
+		.size    = ARRAY_SIZE(dib0700_rc5_table),
+		.ir_type = IR_TYPE_RC5,
+		.name    = RC_MAP_DIB0700_RC5_TABLE,
+	}
+};
+
+static int __init init_rc_map(void)
+{
+	return ir_register_map(&dib0700_rc5_map);
+}
+
+static void __exit exit_rc_map(void)
+{
+	ir_unregister_map(&dib0700_rc5_map);
+}
+
+module_init(init_rc_map)
+module_exit(exit_rc_map)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff -Naurp linux-2.6.35/drivers/media/IR/keymaps/rc-rc6-mce.c linux-2.6.35.new/drivers/media/IR/keymaps/rc-rc6-mce.c
--- linux-2.6.35/drivers/media/IR/keymaps/rc-rc6-mce.c	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/keymaps/rc-rc6-mce.c	2010-09-09 23:21:49.000000000 -0400
@@ -74,6 +74,8 @@ static struct ir_scancode rc6_mce[] = {
 	{ 0x800f045a, KEY_SUBTITLE }, /* Caption/Teletext */
 	{ 0x800f044d, KEY_TITLE },
 
+       { 0x800f044e, KEY_PRINT }, /* Print - HP OEM version of remote */
+
 	{ 0x800f040c, KEY_POWER },
 	{ 0x800f040d, KEY_PROG1 }, /* Windows MCE button */
 
diff -Naurp linux-2.6.35/drivers/media/IR/keymaps/rc-streamzap.c linux-2.6.35.new/drivers/media/IR/keymaps/rc-streamzap.c
--- linux-2.6.35/drivers/media/IR/keymaps/rc-streamzap.c	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/keymaps/rc-streamzap.c	2010-09-09 23:21:42.000000000 -0400
@@ -60,7 +60,7 @@ static struct rc_keymap streamzap_map = 
 	.map = {
 		.scan    = streamzap,
 		.size    = ARRAY_SIZE(streamzap),
-		.ir_type = IR_TYPE_RC5,
+		.ir_type = IR_TYPE_RC5_SZ,
 		.name    = RC_MAP_STREAMZAP,
 	}
 };
diff -Naurp linux-2.6.35/drivers/media/IR/Makefile linux-2.6.35.new/drivers/media/IR/Makefile
--- linux-2.6.35/drivers/media/IR/Makefile	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/Makefile	2010-09-09 23:21:42.000000000 -0400
@@ -17,4 +17,5 @@ obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-c
 # stand-alone IR receivers/transmitters
 obj-$(CONFIG_IR_IMON) += imon.o
 obj-$(CONFIG_IR_MCEUSB) += mceusb.o
+obj-$(CONFIG_IR_ENE) += ene_ir.o
 obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
diff -Naurp linux-2.6.35/drivers/media/IR/mceusb.c linux-2.6.35.new/drivers/media/IR/mceusb.c
--- linux-2.6.35/drivers/media/IR/mceusb.c	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/mceusb.c	2010-09-09 23:21:49.000000000 -0400
@@ -120,6 +120,10 @@ static struct usb_device_id mceusb_dev_t
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
 	/* Philips eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
+	/* Philips/Spinel plus IR transceiver for ASUS */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
+	/* Philips/Spinel plus IR transceiver for ASUS */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
 	/* Realtek MCE IR Receiver */
 	{ USB_DEVICE(VENDOR_REALTEK, 0x0161) },
 	/* SMK/Toshiba G83C0004D410 */
@@ -427,7 +431,7 @@ static void mceusb_dev_printdata(struct 
 	}
 }
 
-static void usb_async_callback(struct urb *urb, struct pt_regs *regs)
+static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
 {
 	struct mceusb_dev *ir;
 	int len;
@@ -476,7 +480,7 @@ static void mce_request_packet(struct mc
 		/* outbound data */
 		usb_fill_int_urb(async_urb, ir->usbdev,
 			usb_sndintpipe(ir->usbdev, ep->bEndpointAddress),
-			async_buf, size, (usb_complete_t) usb_async_callback,
+			async_buf, size, (usb_complete_t)mce_async_callback,
 			ir, ep->bInterval);
 		memcpy(async_buf, data, size);
 
@@ -919,7 +923,6 @@ static int __devinit mceusb_dev_probe(st
 	struct usb_endpoint_descriptor *ep = NULL;
 	struct usb_endpoint_descriptor *ep_in = NULL;
 	struct usb_endpoint_descriptor *ep_out = NULL;
-	struct usb_host_config *config;
 	struct mceusb_dev *ir = NULL;
 	int pipe, maxp, i;
 	char buf[63], name[128] = "";
@@ -929,7 +932,6 @@ static int __devinit mceusb_dev_probe(st
 
 	dev_dbg(&intf->dev, ": %s called\n", __func__);
 
-	config = dev->actconfig;
 	idesc  = intf->cur_altsetting;
 
 	is_gen3 = usb_match_id(intf, gen3_list) ? 1 : 0;
diff -Naurp linux-2.6.35/drivers/media/IR/rc-map.c linux-2.6.35.new/drivers/media/IR/rc-map.c
--- linux-2.6.35/drivers/media/IR/rc-map.c	2010-08-01 18:11:14.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/rc-map.c	2010-09-09 23:21:49.000000000 -0400
@@ -82,3 +82,26 @@ void ir_unregister_map(struct rc_keymap 
 }
 EXPORT_SYMBOL_GPL(ir_unregister_map);
 
+
+static struct ir_scancode empty[] = {
+	{ 0x2a, KEY_COFFEE },
+};
+
+static struct rc_keymap empty_map = {
+	.map = {
+		.scan    = empty,
+		.size    = ARRAY_SIZE(empty),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_EMPTY,
+	}
+};
+
+int ir_rcmap_init(void)
+{
+	return ir_register_map(&empty_map);
+}
+
+void ir_rcmap_cleanup(void)
+{
+	ir_unregister_map(&empty_map);
+}
diff -Naurp linux-2.6.35/drivers/media/IR/rc-map.c.orig linux-2.6.35.new/drivers/media/IR/rc-map.c.orig
--- linux-2.6.35/drivers/media/IR/rc-map.c.orig	1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.35.new/drivers/media/IR/rc-map.c.orig	2010-09-09 23:21:42.000000000 -0400
@@ -0,0 +1,84 @@
+/* ir-raw-event.c - handle IR Pulse/Space event
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <media/ir-core.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+/* Used to handle IR raw handler extensions */
+static LIST_HEAD(rc_map_list);
+static DEFINE_SPINLOCK(rc_map_lock);
+
+static struct rc_keymap *seek_rc_map(const char *name)
+{
+	struct rc_keymap *map = NULL;
+
+	spin_lock(&rc_map_lock);
+	list_for_each_entry(map, &rc_map_list, list) {
+		if (!strcmp(name, map->map.name)) {
+			spin_unlock(&rc_map_lock);
+			return map;
+		}
+	}
+	spin_unlock(&rc_map_lock);
+
+	return NULL;
+}
+
+struct ir_scancode_table *get_rc_map(const char *name)
+{
+
+	struct rc_keymap *map;
+
+	map = seek_rc_map(name);
+#ifdef MODULE
+	if (!map) {
+		int rc = request_module(name);
+		if (rc < 0) {
+			printk(KERN_ERR "Couldn't load IR keymap %s\n", name);
+			return NULL;
+		}
+		msleep(20);	/* Give some time for IR to register */
+
+		map = seek_rc_map(name);
+	}
+#endif
+	if (!map) {
+		printk(KERN_ERR "IR keymap %s not found\n", name);
+		return NULL;
+	}
+
+	printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
+
+	return &map->map;
+}
+EXPORT_SYMBOL_GPL(get_rc_map);
+
+int ir_register_map(struct rc_keymap *map)
+{
+	spin_lock(&rc_map_lock);
+	list_add_tail(&map->list, &rc_map_list);
+	spin_unlock(&rc_map_lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_register_map);
+
+void ir_unregister_map(struct rc_keymap *map)
+{
+	spin_lock(&rc_map_lock);
+	list_del(&map->list);
+	spin_unlock(&rc_map_lock);
+}
+EXPORT_SYMBOL_GPL(ir_unregister_map);
+
diff -Naurp linux-2.6.35/drivers/media/IR/rc-map.c.rej linux-2.6.35.new/drivers/media/IR/rc-map.c.rej
--- linux-2.6.35/drivers/media/IR/rc-map.c.rej	1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.35.new/drivers/media/IR/rc-map.c.rej	2010-09-09 23:21:42.000000000 -0400
@@ -0,0 +1,13 @@
+--- drivers/media/IR/rc-map.c
++++ drivers/media/IR/rc-map.c
+@@ -100,8 +100,10 @@
+ {
+ 	return ir_register_map(&empty_map);
+ }
++EXPORT_SYMBOL_GPL(ir_rcmap_init);
+ 
+ void ir_rcmap_cleanup(void)
+ {
+ 	ir_unregister_map(&empty_map);
+ }
++EXPORT_SYMBOL_GPL(ir_rcmap_cleanup);
diff -Naurp linux-2.6.35/drivers/media/IR/streamzap.c linux-2.6.35.new/drivers/media/IR/streamzap.c
--- linux-2.6.35/drivers/media/IR/streamzap.c	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/media/IR/streamzap.c	2010-09-09 23:21:42.000000000 -0400
@@ -71,9 +71,9 @@ MODULE_DEVICE_TABLE(usb, streamzap_table
 
 /* from ir-rc5-sz-decoder.c */
 #ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
-#define load_rc5_sz_decode()   request_module("ir-rc5-sz-decoder")
+#define load_rc5_sz_decode()    request_module("ir-rc5-sz-decoder")
 #else
-#define load_rc5_sz_decode()   0
+#define load_rc5_sz_decode()    0
 #endif
 
 enum StreamzapDecoderState {
@@ -244,9 +244,9 @@ static void streamzap_callback(struct ur
 		break;
 	}
 
-	dev_info(sz->dev, "%s: received urb, len %d\n", __func__, len);
+	dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
 	for (i = 0; i < len; i++) {
-		dev_info(sz->dev, "sz idx %d: %x\n",
+		dev_dbg(sz->dev, "sz idx %d: %x\n",
 			i, (unsigned char)sz->buf_in[i]);
 		switch (sz->decoder_state) {
 		case PulseSpace:
diff -Naurp linux-2.6.35/drivers/staging/lirc/Kconfig linux-2.6.35.new/drivers/staging/lirc/Kconfig
--- linux-2.6.35/drivers/staging/lirc/Kconfig	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/staging/lirc/Kconfig	2010-09-09 23:21:42.000000000 -0400
@@ -18,14 +18,6 @@ config LIRC_BT829
 	help
 	  Driver for the IR interface on BT829-based hardware
 
-config LIRC_ENE0100
-	tristate "ENE KB3924/ENE0100 CIR Port Reciever"
-	depends on LIRC_STAGING && PNP
-	help
-	  This is a driver for CIR port handled by ENE KB3924 embedded
-	  controller found on some notebooks.
-	  It appears on PNP list as ENE0100.
-
 config LIRC_I2C
 	tristate "I2C Based IR Receivers"
 	depends on LIRC_STAGING && I2C
diff -Naurp linux-2.6.35/drivers/staging/lirc/lirc_ene0100.c linux-2.6.35.new/drivers/staging/lirc/lirc_ene0100.c
--- linux-2.6.35/drivers/staging/lirc/lirc_ene0100.c	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/staging/lirc/lirc_ene0100.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,646 +0,0 @@
-/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
- *
- * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include "lirc_ene0100.h"
-
-static int sample_period = 75;
-static int enable_idle = 1;
-static int enable_learning;
-
-static void ene_set_idle(struct ene_device *dev, int idle);
-static void ene_set_inputs(struct ene_device *dev, int enable);
-
-/* read a hardware register */
-static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
-{
-	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
-	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-	return inb(dev->hw_io + ENE_IO);
-}
-
-/* write a hardware register */
-static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
-{
-	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
-	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-	outb(value, dev->hw_io + ENE_IO);
-}
-
-/* change specific bits in hardware register */
-static void ene_hw_write_reg_mask(struct ene_device *dev,
-				  u16 reg, u8 value, u8 mask)
-{
-	u8 regvalue;
-
-	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
-	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-
-	regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
-	regvalue |= (value & mask);
-	outb(regvalue, dev->hw_io + ENE_IO);
-}
-
-/* read irq status and ack it */
-static int ene_hw_irq_status(struct ene_device *dev, int *buffer_pointer)
-{
-	u8 irq_status;
-	u8 fw_flags1, fw_flags2;
-
-	fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
-
-	if (buffer_pointer)
-		*buffer_pointer = 4 * (fw_flags2 & ENE_FW2_BUF_HIGH);
-
-	if (dev->hw_revision < ENE_HW_C) {
-		irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
-
-		if (!(irq_status & ENEB_IRQ_STATUS_IR))
-			return 0;
-		ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
-				 irq_status & ~ENEB_IRQ_STATUS_IR);
-
-		/* rev B support only recieving */
-		return ENE_IRQ_RX;
-	}
-
-	irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
-
-	if (!(irq_status & ENEC_IRQ_STATUS))
-		return 0;
-
-	/* original driver does that twice - a workaround ? */
-	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
-	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
-
-	/* clear unknown flag in F8F9 */
-	if (fw_flags2 & ENE_FW2_IRQ_CLR)
-		ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
-
-	/* check if this is a TX interrupt */
-	fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
-
-	if (fw_flags1 & ENE_FW1_TXIRQ) {
-		ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
-		return ENE_IRQ_TX;
-	} else
-		return ENE_IRQ_RX;
-}
-
-static int ene_hw_detect(struct ene_device *dev)
-{
-	u8 chip_major, chip_minor;
-	u8 hw_revision, old_ver;
-	u8 tmp;
-	u8 fw_capabilities;
-
-	tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
-	ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
-
-	chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
-	chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
-
-	ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
-	hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
-	old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
-
-	if (hw_revision == 0xFF) {
-
-		ene_printk(KERN_WARNING, "device seems to be disabled\n");
-		ene_printk(KERN_WARNING,
-			"send a mail to lirc-list@lists.sourceforge.net\n");
-		ene_printk(KERN_WARNING, "please attach output of acpidump\n");
-
-		return -ENODEV;
-	}
-
-	if (chip_major == 0x33) {
-		ene_printk(KERN_WARNING, "chips 0x33xx aren't supported yet\n");
-		return -ENODEV;
-	}
-
-	if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
-		dev->hw_revision = ENE_HW_C;
-		ene_printk(KERN_WARNING,
-		       "KB3926C detected, driver support is not complete!\n");
-
-	} else if (old_ver == 0x24 && hw_revision == 0xC0) {
-		dev->hw_revision = ENE_HW_B;
-		ene_printk(KERN_NOTICE, "KB3926B detected\n");
-	} else {
-		dev->hw_revision = ENE_HW_D;
-		ene_printk(KERN_WARNING,
-			"unknown ENE chip detected, assuming KB3926D\n");
-		ene_printk(KERN_WARNING, "driver support incomplete");
-
-	}
-
-	ene_printk(KERN_DEBUG, "chip is 0x%02x%02x - 0x%02x, 0x%02x\n",
-		chip_major, chip_minor, old_ver, hw_revision);
-
-
-	/* detect features hardware supports */
-
-	if (dev->hw_revision < ENE_HW_C)
-		return 0;
-
-	fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
-
-	dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
-	dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
-
-	dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
-	    fw_capabilities & ENE_FW2_FAN_AS_NRML_IN;
-
-	ene_printk(KERN_NOTICE, "hardware features:\n");
-	ene_printk(KERN_NOTICE,
-		"learning and tx %s, gpio40_learn %s, fan_in %s\n",
-	       dev->hw_learning_and_tx_capable ? "on" : "off",
-	       dev->hw_gpio40_learning ? "on" : "off",
-	       dev->hw_fan_as_normal_input ? "on" : "off");
-
-	if (!dev->hw_learning_and_tx_capable && enable_learning)
-		enable_learning = 0;
-
-	if (dev->hw_learning_and_tx_capable) {
-		ene_printk(KERN_WARNING,
-		"Device supports transmitting, but the driver doesn't\n");
-		ene_printk(KERN_WARNING,
-		"due to lack of hardware to test against.\n");
-		ene_printk(KERN_WARNING,
-		"Send a mail to: lirc-list@lists.sourceforge.net\n");
-	}
-	return 0;
-}
-
-/* hardware initialization */
-static int ene_hw_init(void *data)
-{
-	u8 reg_value;
-	struct ene_device *dev = (struct ene_device *)data;
-	dev->in_use = 1;
-
-	if (dev->hw_revision < ENE_HW_C) {
-		ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
-		ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
-	} else {
-		reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
-		reg_value |= ENEC_IRQ_UNK_EN;
-		reg_value &= ~ENEC_IRQ_STATUS;
-		reg_value |= (dev->irq & ENEC_IRQ_MASK);
-		ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
-		ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
-	}
-
-	ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
-	ene_set_inputs(dev, enable_learning);
-
-	/* set sampling period */
-	ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
-
-	/* ack any pending irqs - just in case */
-	ene_hw_irq_status(dev, NULL);
-
-	/* enter idle mode */
-	ene_set_idle(dev, 1);
-
-	/* enable firmware bits */
-	ene_hw_write_reg_mask(dev, ENE_FW1,
-			      ENE_FW1_ENABLE | ENE_FW1_IRQ,
-			      ENE_FW1_ENABLE | ENE_FW1_IRQ);
-	/* clear stats */
-	dev->sample = 0;
-	return 0;
-}
-
-/* this enables gpio40 signal, used if connected to wide band input*/
-static void ene_enable_gpio40(struct ene_device *dev, int enable)
-{
-	ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, enable ?
-			      0 : ENE_CIR_CONF2_GPIO40DIS,
-			      ENE_CIR_CONF2_GPIO40DIS);
-}
-
-/* this enables the classic sampler */
-static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
-{
-	ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_ADC_ON : 0);
-}
-
-/* this enables recieve via fan input */
-static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
-{
-	if (!enable)
-		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
-	else {
-		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
-		ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
-	}
-	dev->fan_input_inuse = enable;
-}
-
-/* determine which input to use*/
-static void ene_set_inputs(struct ene_device *dev, int learning_enable)
-{
-	ene_enable_normal_recieve(dev, 1);
-
-	/* old hardware doesn't support learning mode for sure */
-	if (dev->hw_revision <= ENE_HW_B)
-		return;
-
-	/* reciever not learning capable, still set gpio40 correctly */
-	if (!dev->hw_learning_and_tx_capable) {
-		ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
-		return;
-	}
-
-	/* enable learning mode */
-	if (learning_enable) {
-		ene_enable_gpio40(dev, dev->hw_gpio40_learning);
-
-		/* fan input is not used for learning */
-		if (dev->hw_fan_as_normal_input)
-			ene_enable_fan_recieve(dev, 0);
-
-	/* disable learning mode */
-	} else {
-		if (dev->hw_fan_as_normal_input) {
-			ene_enable_fan_recieve(dev, 1);
-			ene_enable_normal_recieve(dev, 0);
-		} else
-			ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
-	}
-
-	/* set few additional settings for this mode */
-	ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_enable ?
-			      ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
-
-	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_enable ?
-			      ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
-}
-
-/* deinitialization */
-static void ene_hw_deinit(void *data)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-
-	/* disable samplers */
-	ene_enable_normal_recieve(dev, 0);
-
-	if (dev->hw_fan_as_normal_input)
-		ene_enable_fan_recieve(dev, 0);
-
-	/* disable hardware IRQ and firmware flag */
-	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
-
-	ene_set_idle(dev, 1);
-	dev->in_use = 0;
-}
-
-/*  sends current sample to userspace */
-static void send_sample(struct ene_device *dev)
-{
-	int value = abs(dev->sample) & PULSE_MASK;
-
-	if (dev->sample > 0)
-		value |= PULSE_BIT;
-
-	if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
-		lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&value);
-		wake_up(&dev->lirc_driver->rbuf->wait_poll);
-	}
-	dev->sample = 0;
-}
-
-/*  this updates current sample */
-static void update_sample(struct ene_device *dev, int sample)
-{
-	if (!dev->sample)
-		dev->sample = sample;
-	else if (same_sign(dev->sample, sample))
-		dev->sample += sample;
-	else {
-		send_sample(dev);
-		dev->sample = sample;
-	}
-}
-
-/* enable or disable idle mode */
-static void ene_set_idle(struct ene_device *dev, int idle)
-{
-	struct timeval now;
-	int disable = idle && enable_idle && (dev->hw_revision < ENE_HW_C);
-
-	ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
-			      disable ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
-			      ENE_CIR_SAMPLE_OVERFLOW);
-	dev->idle = idle;
-
-	/* remember when we have entered the idle mode */
-	if (idle) {
-		do_gettimeofday(&dev->gap_start);
-		return;
-	}
-
-	/* send the gap between keypresses now */
-	do_gettimeofday(&now);
-
-	if (now.tv_sec - dev->gap_start.tv_sec > 16)
-		dev->sample = space(PULSE_MASK);
-	else
-		dev->sample = dev->sample +
-		    space(1000000ull * (now.tv_sec - dev->gap_start.tv_sec))
-		    + space(now.tv_usec - dev->gap_start.tv_usec);
-
-	if (abs(dev->sample) > PULSE_MASK)
-		dev->sample = space(PULSE_MASK);
-	send_sample(dev);
-}
-
-/* interrupt handler */
-static irqreturn_t ene_hw_irq(int irq, void *data)
-{
-	u16 hw_value;
-	int i, hw_sample;
-	int space;
-	int buffer_pointer;
-	int irq_status;
-
-	struct ene_device *dev = (struct ene_device *)data;
-	irq_status = ene_hw_irq_status(dev, &buffer_pointer);
-
-	if (!irq_status)
-		return IRQ_NONE;
-
-	/* TODO: only RX for now */
-	if (irq_status == ENE_IRQ_TX)
-		return IRQ_HANDLED;
-
-	for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
-
-		hw_value = ene_hw_read_reg(dev,
-				ENE_SAMPLE_BUFFER + buffer_pointer + i);
-
-		if (dev->fan_input_inuse) {
-			/* read high part of the sample */
-			hw_value |= ene_hw_read_reg(dev,
-			    ENE_SAMPLE_BUFFER_FAN + buffer_pointer + i) << 8;
-
-			/* test for _space_ bit */
-			space = !(hw_value & ENE_FAN_SMPL_PULS_MSK);
-
-			/* clear space bit, and other unused bits */
-			hw_value &= ENE_FAN_VALUE_MASK;
-			hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
-
-		} else {
-			space = hw_value & ENE_SAMPLE_SPC_MASK;
-			hw_value &= ENE_SAMPLE_VALUE_MASK;
-			hw_sample = hw_value * sample_period;
-		}
-
-		/* no more data */
-		if (!(hw_value))
-			break;
-
-		if (space)
-			hw_sample *= -1;
-
-		/* overflow sample recieved, handle it */
-
-		if (!dev->fan_input_inuse && hw_value == ENE_SAMPLE_OVERFLOW) {
-
-			if (dev->idle)
-				continue;
-
-			if (dev->sample > 0 || abs(dev->sample) <= ENE_MAXGAP)
-				update_sample(dev, hw_sample);
-			else
-				ene_set_idle(dev, 1);
-
-			continue;
-		}
-
-		/* normal first sample recieved */
-		if (!dev->fan_input_inuse && dev->idle) {
-			ene_set_idle(dev, 0);
-
-			/* discard first recieved value, its random
-			   since its the time signal was off before
-			   first pulse if idle mode is enabled, HW
-			   does that for us */
-
-			if (!enable_idle)
-				continue;
-		}
-		update_sample(dev, hw_sample);
-		send_sample(dev);
-	}
-	return IRQ_HANDLED;
-}
-
-static int ene_probe(struct pnp_dev *pnp_dev,
-		     const struct pnp_device_id *dev_id)
-{
-	struct ene_device *dev;
-	struct lirc_driver *lirc_driver;
-	int error = -ENOMEM;
-
-	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
-
-	if (!dev)
-		goto err1;
-
-	dev->pnp_dev = pnp_dev;
-	pnp_set_drvdata(pnp_dev, dev);
-
-
-	/* prepare lirc interface */
-	error = -ENOMEM;
-	lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
-
-	if (!lirc_driver)
-		goto err2;
-
-	dev->lirc_driver = lirc_driver;
-
-	strcpy(lirc_driver->name, ENE_DRIVER_NAME);
-	lirc_driver->minor = -1;
-	lirc_driver->code_length = sizeof(int) * 8;
-	lirc_driver->features = LIRC_CAN_REC_MODE2;
-	lirc_driver->data = dev;
-	lirc_driver->set_use_inc = ene_hw_init;
-	lirc_driver->set_use_dec = ene_hw_deinit;
-	lirc_driver->dev = &pnp_dev->dev;
-	lirc_driver->owner = THIS_MODULE;
-
-	lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-
-	if (!lirc_driver->rbuf)
-		goto err3;
-
-	if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 256))
-		goto err4;
-
-	error = -ENODEV;
-	if (lirc_register_driver(lirc_driver))
-		goto err5;
-
-	/* validate resources */
-	if (!pnp_port_valid(pnp_dev, 0) ||
-	    pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
-		goto err6;
-
-	if (!pnp_irq_valid(pnp_dev, 0))
-		goto err6;
-
-	dev->hw_io = pnp_port_start(pnp_dev, 0);
-	dev->irq = pnp_irq(pnp_dev, 0);
-
-	/* claim the resources */
-	error = -EBUSY;
-	if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
-		goto err6;
-
-	if (request_irq(dev->irq, ene_hw_irq,
-			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
-		goto err7;
-
-	/* detect hardware version and features */
-	error = ene_hw_detect(dev);
-	if (error)
-		goto err8;
-
-	ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
-	return 0;
-
-err8:
-	free_irq(dev->irq, dev);
-err7:
-	release_region(dev->hw_io, ENE_MAX_IO);
-err6:
-	lirc_unregister_driver(lirc_driver->minor);
-err5:
-	lirc_buffer_free(lirc_driver->rbuf);
-err4:
-	kfree(lirc_driver->rbuf);
-err3:
-	kfree(lirc_driver);
-err2:
-	kfree(dev);
-err1:
-	return error;
-}
-
-static void ene_remove(struct pnp_dev *pnp_dev)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	ene_hw_deinit(dev);
-	free_irq(dev->irq, dev);
-	release_region(dev->hw_io, ENE_MAX_IO);
-	lirc_unregister_driver(dev->lirc_driver->minor);
-	lirc_buffer_free(dev->lirc_driver->rbuf);
-	kfree(dev->lirc_driver);
-	kfree(dev);
-}
-
-#ifdef CONFIG_PM
-
-/* TODO: make 'wake on IR' configurable and add .shutdown */
-/* currently impossible due to lack of kernel support */
-
-static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	ene_hw_write_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, ENE_FW1_WAKE);
-	return 0;
-}
-
-static int ene_resume(struct pnp_dev *pnp_dev)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	if (dev->in_use)
-		ene_hw_init(dev);
-
-	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_WAKE);
-	return 0;
-}
-
-#endif
-
-static const struct pnp_device_id ene_ids[] = {
-	{.id = "ENE0100",},
-	{},
-};
-
-static struct pnp_driver ene_driver = {
-	.name = ENE_DRIVER_NAME,
-	.id_table = ene_ids,
-	.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
-
-	.probe = ene_probe,
-	.remove = __devexit_p(ene_remove),
-
-#ifdef CONFIG_PM
-	.suspend = ene_suspend,
-	.resume = ene_resume,
-#endif
-};
-
-static int __init ene_init(void)
-{
-	if (sample_period < 5) {
-		ene_printk(KERN_ERR, "sample period must be at\n");
-		ene_printk(KERN_ERR, "least 5 us, (at least 30 recommended)\n");
-		return -EINVAL;
-	}
-	return pnp_register_driver(&ene_driver);
-}
-
-static void ene_exit(void)
-{
-	pnp_unregister_driver(&ene_driver);
-}
-
-module_param(sample_period, int, S_IRUGO);
-MODULE_PARM_DESC(sample_period, "Hardware sample period (75 us default)");
-
-module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(enable_idle,
-	"Enables turning off signal sampling after long inactivity time; "
-	"if disabled might help detecting input signal (default: enabled)");
-
-module_param(enable_learning, bool, S_IRUGO);
-MODULE_PARM_DESC(enable_learning, "Use wide band (learning) reciever");
-
-MODULE_DEVICE_TABLE(pnp, ene_ids);
-MODULE_DESCRIPTION
-    ("LIRC driver for KB3926B/KB3926C/KB3926D (aka ENE0100) CIR port");
-MODULE_AUTHOR("Maxim Levitsky");
-MODULE_LICENSE("GPL");
-
-module_init(ene_init);
-module_exit(ene_exit);
diff -Naurp linux-2.6.35/drivers/staging/lirc/lirc_ene0100.h linux-2.6.35.new/drivers/staging/lirc/lirc_ene0100.h
--- linux-2.6.35/drivers/staging/lirc/lirc_ene0100.h	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/staging/lirc/lirc_ene0100.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,169 +0,0 @@
-/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
- *
- * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
-
-/* hardware address */
-#define ENE_STATUS		0	 /* hardware status - unused */
-#define ENE_ADDR_HI		1	 /* hi byte of register address */
-#define ENE_ADDR_LO		2	 /* low byte of register address */
-#define ENE_IO			3	 /* read/write window */
-#define ENE_MAX_IO		4
-
-/* 8 bytes of samples, divided in 2 halfs*/
-#define ENE_SAMPLE_BUFFER	0xF8F0	 /* regular sample buffer */
-#define ENE_SAMPLE_SPC_MASK	(1 << 7) /* sample is space */
-#define ENE_SAMPLE_VALUE_MASK	0x7F
-#define ENE_SAMPLE_OVERFLOW	0x7F
-#define ENE_SAMPLES_SIZE	4
-
-/* fan input sample buffer */
-#define ENE_SAMPLE_BUFFER_FAN	0xF8FB	 /* this buffer holds high byte of */
-					 /* each sample of normal buffer */
-
-#define ENE_FAN_SMPL_PULS_MSK	0x8000	 /* this bit of combined sample */
-					 /* if set, says that sample is pulse */
-#define ENE_FAN_VALUE_MASK	0x0FFF   /* mask for valid bits of the value */
-
-/* first firmware register */
-#define ENE_FW1			0xF8F8
-#define	ENE_FW1_ENABLE		(1 << 0) /* enable fw processing */
-#define ENE_FW1_TXIRQ		(1 << 1) /* TX interrupt pending */
-#define ENE_FW1_WAKE		(1 << 6) /* enable wake from S3 */
-#define ENE_FW1_IRQ		(1 << 7) /* enable interrupt */
-
-/* second firmware register */
-#define ENE_FW2			0xF8F9
-#define ENE_FW2_BUF_HIGH	(1 << 0) /* which half of the buffer to read */
-#define ENE_FW2_IRQ_CLR		(1 << 2) /* clear this on IRQ */
-#define ENE_FW2_GP40_AS_LEARN	(1 << 4) /* normal input is used as */
-					 /* learning input */
-#define ENE_FW2_FAN_AS_NRML_IN	(1 << 6) /* fan is used as normal input */
-#define ENE_FW2_LEARNING	(1 << 7) /* hardware supports learning and TX */
-
-/* fan as input settings - only if learning capable */
-#define ENE_FAN_AS_IN1		0xFE30   /* fan init reg 1 */
-#define ENE_FAN_AS_IN1_EN	0xCD
-#define ENE_FAN_AS_IN2		0xFE31   /* fan init reg 2 */
-#define ENE_FAN_AS_IN2_EN	0x03
-#define ENE_SAMPLE_PERIOD_FAN   61	 /* fan input has fixed sample period */
-
-/* IRQ registers block (for revision B) */
-#define ENEB_IRQ		0xFD09	 /* IRQ number */
-#define ENEB_IRQ_UNK1		0xFD17	 /* unknown setting = 1 */
-#define ENEB_IRQ_STATUS		0xFD80	 /* irq status */
-#define ENEB_IRQ_STATUS_IR	(1 << 5) /* IR irq */
-
-/* IRQ registers block (for revision C,D) */
-#define ENEC_IRQ		0xFE9B	 /* new irq settings register */
-#define ENEC_IRQ_MASK		0x0F	 /* irq number mask */
-#define ENEC_IRQ_UNK_EN		(1 << 4) /* always enabled */
-#define ENEC_IRQ_STATUS		(1 << 5) /* irq status and ACK */
-
-/* CIR block settings */
-#define ENE_CIR_CONF1		0xFEC0
-#define ENE_CIR_CONF1_ADC_ON	0x7	 /* reciever on gpio40 enabled */
-#define ENE_CIR_CONF1_LEARN1	(1 << 3) /* enabled on learning mode */
-#define ENE_CIR_CONF1_TX_ON	0x30	 /* enabled on transmit */
-#define ENE_CIR_CONF1_TX_CARR	(1 << 7) /* send TX carrier or not */
-
-#define ENE_CIR_CONF2		0xFEC1	 /* unknown setting = 0 */
-#define ENE_CIR_CONF2_LEARN2	(1 << 4) /* set on enable learning */
-#define ENE_CIR_CONF2_GPIO40DIS	(1 << 5) /* disable normal input via gpio40 */
-
-#define ENE_CIR_SAMPLE_PERIOD	0xFEC8	 /* sample period in us */
-#define ENE_CIR_SAMPLE_OVERFLOW	(1 << 7) /* interrupt on overflows if set */
-
-
-/* transmitter - not implemented yet */
-/* KB3926C and higher */
-/* transmission is very similiar to recieving, a byte is written to */
-/* ENE_TX_INPUT, in same manner as it is read from sample buffer */
-/* sample period is fixed*/
-
-
-/* transmitter ports */
-#define ENE_TX_PORT1		0xFC01	 /* this enables one or both */
-#define ENE_TX_PORT1_EN		(1 << 5) /* TX ports */
-#define ENE_TX_PORT2		0xFC08
-#define ENE_TX_PORT2_EN		(1 << 1)
-
-#define ENE_TX_INPUT		0xFEC9	 /* next byte to transmit */
-#define ENE_TX_SPC_MASK		(1 << 7) /* Transmitted sample is space */
-#define ENE_TX_UNK1		0xFECB	 /* set to 0x63 */
-#define ENE_TX_SMPL_PERIOD	50	 /* transmit sample period */
-
-
-#define ENE_TX_CARRIER		0xFECE	 /* TX carrier * 2 (khz) */
-#define ENE_TX_CARRIER_UNKBIT	0x80	 /* This bit set on transmit */
-#define ENE_TX_CARRIER_LOW	0xFECF	 /* TX carrier / 2 */
-
-/* Hardware versions */
-#define ENE_HW_VERSION		0xFF00	 /* hardware revision */
-#define ENE_HW_UNK		0xFF1D
-#define ENE_HW_UNK_CLR		(1 << 2)
-#define ENE_HW_VER_MAJOR	0xFF1E	 /* chip version */
-#define ENE_HW_VER_MINOR	0xFF1F
-#define ENE_HW_VER_OLD		0xFD00
-
-#define same_sign(a, b) ((((a) > 0) && (b) > 0) || ((a) < 0 && (b) < 0))
-
-#define ENE_DRIVER_NAME		"enecir"
-#define ENE_MAXGAP		250000	 /* this is amount of time we wait
-					 before turning the sampler, chosen
-					 arbitry */
-
-#define space(len)	       (-(len))	 /* add a space */
-
-/* software defines */
-#define ENE_IRQ_RX		1
-#define ENE_IRQ_TX		2
-
-#define  ENE_HW_B		1	/* 3926B */
-#define  ENE_HW_C		2	/* 3926C */
-#define  ENE_HW_D		3	/* 3926D */
-
-#define ene_printk(level, text, ...) \
-	printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
-
-struct ene_device {
-	struct pnp_dev *pnp_dev;
-	struct lirc_driver *lirc_driver;
-
-	/* hw settings */
-	unsigned long hw_io;
-	int irq;
-
-	int hw_revision;			/* hardware revision */
-	int hw_learning_and_tx_capable;		/* learning capable */
-	int hw_gpio40_learning;			/* gpio40 is learning */
-	int hw_fan_as_normal_input;	/* fan input is used as regular input */
-
-	/* device data */
-	int idle;
-	int fan_input_inuse;
-
-	int sample;
-	int in_use;
-
-	struct timeval gap_start;
-};
diff -Naurp linux-2.6.35/drivers/staging/lirc/Makefile linux-2.6.35.new/drivers/staging/lirc/Makefile
--- linux-2.6.35/drivers/staging/lirc/Makefile	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/drivers/staging/lirc/Makefile	2010-09-09 23:21:42.000000000 -0400
@@ -4,7 +4,6 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_LIRC_BT829)	+= lirc_bt829.o
-obj-$(CONFIG_LIRC_ENE0100)	+= lirc_ene0100.o
 obj-$(CONFIG_LIRC_I2C)		+= lirc_i2c.o
 obj-$(CONFIG_LIRC_IGORPLUGUSB)	+= lirc_igorplugusb.o
 obj-$(CONFIG_LIRC_IMON)		+= lirc_imon.o
diff -Naurp linux-2.6.35/include/media/ir-core.h linux-2.6.35.new/include/media/ir-core.h
--- linux-2.6.35/include/media/ir-core.h	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/include/media/ir-core.h	2010-09-09 23:21:49.000000000 -0400
@@ -41,6 +41,11 @@ enum rc_driver_type {
  *	anything with it. Yet, as the same keycode table can be used with other
  *	devices, a mask is provided to allow its usage. Drivers should generally
  *	leave this field in blank
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
+ * @rx_resolution : resolution (in ns) of input sampler
+ * @tx_resolution: resolution (in ns) of output sampler
  * @priv: driver-specific data, to be used on the callbacks
  * @change_protocol: allow changing the protocol used on hardware decoders
  * @open: callback to allow drivers to enable polling/irq when IR input device
@@ -49,19 +54,36 @@ enum rc_driver_type {
  *	is opened.
  * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
  * @s_tx_carrier: set transmit carrier frequency
+ * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
+ * @s_rx_carrier: inform driver about carrier it is expected to handle
  * @tx_ir: transmit IR
+ * @s_idle: optional: enable/disable hardware idle mode, upon which,
+	device doesn't interrupt host until it sees IR pulses
+ * @s_learning_mode: enable wide band receiver used for learning
  */
 struct ir_dev_props {
 	enum rc_driver_type	driver_type;
 	unsigned long		allowed_protos;
 	u32			scanmask;
+
+	u32			timeout;
+	u32			min_timeout;
+	u32			max_timeout;
+
+	u32			rx_resolution;
+	u32			tx_resolution;
+
 	void			*priv;
 	int			(*change_protocol)(void *priv, u64 ir_type);
 	int			(*open)(void *priv);
 	void			(*close)(void *priv);
 	int			(*s_tx_mask)(void *priv, u32 mask);
 	int			(*s_tx_carrier)(void *priv, u32 carrier);
+	int			(*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
+	int			(*s_rx_carrier_range)(void *priv, u32 min, u32 max);
 	int			(*tx_ir)(void *priv, int *txbuf, u32 n);
+	void			(*s_idle)(void *priv, int enable);
+	int			(*s_learning_mode)(void *priv, int enable);
 };
 
 struct ir_input_dev {
@@ -69,9 +91,10 @@ struct ir_input_dev {
 	char				*driver_name;	/* Name of the driver module */
 	struct ir_scancode_table	rc_tab;		/* scan/key table */
 	unsigned long			devno;		/* device number */
-	const struct ir_dev_props	*props;		/* Device properties */
+	struct ir_dev_props		*props;		/* Device properties */
 	struct ir_raw_event_ctrl	*raw;		/* for raw pulse/space events */
 	struct input_dev		*input_dev;	/* the input device associated with this device */
+	bool				idle;
 
 	/* key info - needed by IR keycode handlers */
 	spinlock_t			keylock;	/* protects the below members */
@@ -95,12 +118,12 @@ enum raw_event_type {
 /* From ir-keytable.c */
 int __ir_input_register(struct input_dev *dev,
 		      const struct ir_scancode_table *ir_codes,
-		      const struct ir_dev_props *props,
+		      struct ir_dev_props *props,
 		      const char *driver_name);
 
 static inline int ir_input_register(struct input_dev *dev,
 		      const char *map_name,
-		      const struct ir_dev_props *props,
+		      struct ir_dev_props *props,
 		      const char *driver_name) {
 	struct ir_scancode_table *ir_codes;
 	struct ir_input_dev *ir_dev;
@@ -110,8 +133,12 @@ static inline int ir_input_register(stru
 		return -EINVAL;
 
 	ir_codes = get_rc_map(map_name);
-	if (!ir_codes)
-		return -EINVAL;
+	if (!ir_codes) {
+		ir_codes = get_rc_map(RC_MAP_EMPTY);
+
+		if (!ir_codes)
+			return -EINVAL;
+	}
 
 	rc = __ir_input_register(dev, ir_codes, props, driver_name);
 	if (rc < 0)
@@ -144,6 +171,10 @@ struct ir_raw_event {
 void ir_raw_event_handle(struct input_dev *input_dev);
 int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
 int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+				struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle);
+
 static inline void ir_raw_event_reset(struct input_dev *input_dev)
 {
 	struct ir_raw_event ev = { .pulse = false, .duration = 0 };
diff -Naurp linux-2.6.35/include/media/lirc.h linux-2.6.35.new/include/media/lirc.h
--- linux-2.6.35/include/media/lirc.h	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/include/media/lirc.h	2010-09-09 23:21:42.000000000 -0400
@@ -77,6 +77,7 @@
 #define LIRC_CAN_SET_REC_FILTER           0x08000000
 
 #define LIRC_CAN_MEASURE_CARRIER          0x02000000
+#define LIRC_CAN_USE_WIDEBAND_RECEIVER    0x04000000
 
 #define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
 #define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
@@ -145,7 +146,7 @@
  * if enabled from the next key press on the driver will send
  * LIRC_MODE2_FREQUENCY packets
  */
-#define LIRC_SET_MEASURE_CARRIER_MODE  _IOW('i', 0x0000001d, __u32)
+#define LIRC_SET_MEASURE_CARRIER_MODE	_IOW('i', 0x0000001d, __u32)
 
 /*
  * to set a range use
@@ -162,4 +163,6 @@
 #define LIRC_SETUP_START               _IO('i', 0x00000021)
 #define LIRC_SETUP_END                 _IO('i', 0x00000022)
 
+#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
+
 #endif
diff -Naurp linux-2.6.35/include/media/rc-map.h linux-2.6.35.new/include/media/rc-map.h
--- linux-2.6.35/include/media/rc-map.h	2010-09-09 23:19:00.000000000 -0400
+++ linux-2.6.35.new/include/media/rc-map.h	2010-09-09 23:21:42.000000000 -0400
@@ -70,6 +70,8 @@ void rc_map_init(void);
 #define RC_MAP_BUDGET_CI_OLD             "rc-budget-ci-old"
 #define RC_MAP_CINERGY_1400              "rc-cinergy-1400"
 #define RC_MAP_CINERGY                   "rc-cinergy"
+#define RC_MAP_DIB0700_NEC_TABLE         "rc-dib0700-nec"
+#define RC_MAP_DIB0700_RC5_TABLE         "rc-dib0700-rc5"
 #define RC_MAP_DM1105_NEC                "rc-dm1105-nec"
 #define RC_MAP_DNTV_LIVE_DVBT_PRO        "rc-dntv-live-dvbt-pro"
 #define RC_MAP_DNTV_LIVE_DVB_T           "rc-dntv-live-dvb-t"
@@ -125,6 +127,7 @@ void rc_map_init(void);
 #define RC_MAP_VIDEOMATE_TV_PVR          "rc-videomate-tv-pvr"
 #define RC_MAP_WINFAST                   "rc-winfast"
 #define RC_MAP_WINFAST_USBII_DELUXE      "rc-winfast-usbii-deluxe"
+
 /*
  * Please, do not just append newer Remote Controller names at the end.
  * The names should be ordered in alphabetical order