From 5c4f8b5b68451e5d208a5aefb195fdd108629da4 Mon Sep 17 00:00:00 2001
From: Tomasz Nowicki <tn@semihalf.com>
Date: Fri, 9 Sep 2016 21:24:03 +0200
Subject: [PATCH 1/6] PCI/ACPI: Extend pci_mcfg_lookup() responsibilities
In preparation for adding MCFG platform specific quirk handling move
CFG resource calculation and ECAM ops assignment to pci_mcfg_lookup().
It becomes the gate for further ops and CFG resource manipulation
in arch-agnostic code (drivers/acpi/pci_mcfg.c).
No functionality changes in this patch.
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
---
arch/arm64/kernel/pci.c | 17 +++++------------
drivers/acpi/pci_mcfg.c | 28 +++++++++++++++++++++++++---
include/linux/pci-acpi.h | 4 +++-
3 files changed, 33 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index acf3872..fb439c7 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -125,24 +125,17 @@ pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
u16 seg = root->segment;
struct pci_config_window *cfg;
struct resource cfgres;
- unsigned int bsz;
+ struct pci_ecam_ops *ecam_ops;
+ int ret;
- /* Use address from _CBA if present, otherwise lookup MCFG */
- if (!root->mcfg_addr)
- root->mcfg_addr = pci_mcfg_lookup(seg, bus_res);
-
- if (!root->mcfg_addr) {
+ ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
+ if (ret) {
dev_err(&root->device->dev, "%04x:%pR ECAM region not found\n",
seg, bus_res);
return NULL;
}
- bsz = 1 << pci_generic_ecam_ops.bus_shift;
- cfgres.start = root->mcfg_addr + bus_res->start * bsz;
- cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
- cfgres.flags = IORESOURCE_MEM;
- cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res,
- &pci_generic_ecam_ops);
+ cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res, ecam_ops);
if (IS_ERR(cfg)) {
dev_err(&root->device->dev, "%04x:%pR error %ld mapping ECAM\n",
seg, bus_res, PTR_ERR(cfg));
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index b5b376e..ffcc651 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
/* Structure to hold entries from the MCFG table */
struct mcfg_entry {
@@ -35,9 +36,18 @@ struct mcfg_entry {
/* List to save MCFG entries */
static LIST_HEAD(pci_mcfg_list);
-phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
+int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
+ struct pci_ecam_ops **ecam_ops)
{
+ struct pci_ecam_ops *ops = &pci_generic_ecam_ops;
+ struct resource *bus_res = &root->secondary;
+ u16 seg = root->segment;
struct mcfg_entry *e;
+ struct resource res;
+
+ /* Use address from _CBA if present, otherwise lookup MCFG */
+ if (root->mcfg_addr)
+ goto skip_lookup;
/*
* We expect exact match, unless MCFG entry end bus covers more than
@@ -45,10 +55,22 @@ phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
*/
list_for_each_entry(e, &pci_mcfg_list, list) {
if (e->segment == seg && e->bus_start == bus_res->start &&
- e->bus_end >= bus_res->end)
- return e->addr;
+ e->bus_end >= bus_res->end) {
+ root->mcfg_addr = e->addr;
+ }
+
}
+ if (!root->mcfg_addr)
+ return -ENXIO;
+
+skip_lookup:
+ memset(&res, 0, sizeof(res));
+ res.start = root->mcfg_addr + (bus_res->start << 20);
+ res.end = res.start + (resource_size(bus_res) << 20) - 1;
+ res.flags = IORESOURCE_MEM;
+ *cfgres = res;
+ *ecam_ops = ops;
return 0;
}
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 7d63a66..7a4e83a 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -24,7 +24,9 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
}
extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
-extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
+struct pci_ecam_ops;
+extern int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
+ struct pci_ecam_ops **ecam_ops);
static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
{
--
2.9.3
From 16c02d9cc0e67b48c343aecc4b5566e729a97683 Mon Sep 17 00:00:00 2001
From: Tomasz Nowicki <tn@semihalf.com>
Date: Fri, 9 Sep 2016 21:24:04 +0200
Subject: [PATCH 2/6] PCI/ACPI: Check platform specific ECAM quirks
Some platforms may not be fully compliant with generic set of PCI config
accessors. For these cases we implement the way to overwrite CFG accessors
set and configuration space range.
In first place pci_mcfg_parse() saves machine's IDs and revision number
(these come from MCFG header) in order to match against known quirk entries.
Then the algorithm traverses available quirk list (static array),
matches against <oem_id, oem_table_id, rev, domain, bus number range> and
returns custom PCI config ops and/or CFG resource structure.
When adding new quirk there are two possibilities:
1. Override default pci_generic_ecam_ops ops but CFG resource comes from MCFG
{ "OEM_ID", "OEM_TABLE_ID", <REV>, <DOMAIN>, <BUS_NR>, &foo_ops, MCFG_RES_EMPTY },
2. Override default pci_generic_ecam_ops ops and CFG resource. For this case
it is also allowed get CFG resource from quirk entry w/o having it in MCFG.
{ "OEM_ID", "OEM_TABLE_ID", <REV>, <DOMAIN>, <BUS_NR>, &boo_ops,
DEFINE_RES_MEM(START, SIZE) },
pci_generic_ecam_ops and MCFG entries will be used for platforms
free from quirks.
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Christopher Covington <cov@codeaurora.org>
---
drivers/acpi/pci_mcfg.c | 80 +++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 74 insertions(+), 6 deletions(-)
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index ffcc651..2b8acc7 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -32,6 +32,59 @@ struct mcfg_entry {
u8 bus_start;
u8 bus_end;
};
+struct mcfg_fixup {
+ char oem_id[ACPI_OEM_ID_SIZE + 1];
+ char oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1];
+ u32 oem_revision;
+ u16 seg;
+ struct resource bus_range;
+ struct pci_ecam_ops *ops;
+ struct resource cfgres;
+};
+
+#define MCFG_DOM_ANY (-1)
+#define MCFG_BUS_RANGE(start, end) DEFINE_RES_NAMED((start), \
+ ((end) - (start) + 1), \
+ NULL, IORESOURCE_BUS)
+#define MCFG_BUS_ANY MCFG_BUS_RANGE(0x0, 0xff)
+#define MCFG_RES_EMPTY DEFINE_RES_NAMED(0, 0, NULL, 0)
+
+static struct mcfg_fixup mcfg_quirks[] = {
+/* { OEM_ID, OEM_TABLE_ID, REV, DOMAIN, BUS_RANGE, cfgres, ops }, */
+};
+
+static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
+static char mcfg_oem_table_id[ACPI_OEM_TABLE_ID_SIZE];
+static u32 mcfg_oem_revision;
+
+static void pci_mcfg_match_quirks(struct acpi_pci_root *root,
+ struct resource *cfgres,
+ struct pci_ecam_ops **ecam_ops)
+{
+ struct mcfg_fixup *f;
+ int i;
+
+ /*
+ * First match against PCI topology <domain:bus> then use OEM ID, OEM
+ * table ID, and OEM revision from MCFG table standard header.
+ */
+ for (i = 0, f = mcfg_quirks; i < ARRAY_SIZE(mcfg_quirks); i++, f++) {
+ if (f->seg == root->segment &&
+ resource_contains(&f->bus_range, &root->secondary) &&
+ !memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
+ !memcmp(f->oem_table_id, mcfg_oem_table_id,
+ ACPI_OEM_TABLE_ID_SIZE) &&
+ f->oem_revision == mcfg_oem_revision) {
+ if (f->cfgres.start)
+ *cfgres = f->cfgres;
+ if (f->ops)
+ *ecam_ops = f->ops;
+ dev_info(&root->device->dev, "Applying PCI MCFG quirks for %s %s rev: %d\n",
+ f->oem_id, f->oem_table_id, f->oem_revision);
+ return;
+ }
+ }
+}
/* List to save MCFG entries */
static LIST_HEAD(pci_mcfg_list);
@@ -61,14 +114,24 @@ int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
}
- if (!root->mcfg_addr)
- return -ENXIO;
-
skip_lookup:
memset(&res, 0, sizeof(res));
- res.start = root->mcfg_addr + (bus_res->start << 20);
- res.end = res.start + (resource_size(bus_res) << 20) - 1;
- res.flags = IORESOURCE_MEM;
+ if (root->mcfg_addr) {
+ res.start = root->mcfg_addr + (bus_res->start << 20);
+ res.end = res.start + (resource_size(bus_res) << 20) - 1;
+ res.flags = IORESOURCE_MEM;
+ }
+
+ /*
+ * Let to override default ECAM ops and CFG resource range.
+ * Also, this might even retrieve CFG resource range in case MCFG
+ * does not have it. Invalid CFG start address means MCFG firmware bug
+ * or we need another quirk in array.
+ */
+ pci_mcfg_match_quirks(root, &res, &ops);
+ if (!res.start)
+ return -ENXIO;
+
*cfgres = res;
*ecam_ops = ops;
return 0;
@@ -101,6 +164,11 @@ static __init int pci_mcfg_parse(struct acpi_table_header *header)
list_add(&e->list, &pci_mcfg_list);
}
+ /* Save MCFG IDs and revision for quirks matching */
+ memcpy(mcfg_oem_id, header->oem_id, ACPI_OEM_ID_SIZE);
+ memcpy(mcfg_oem_table_id, header->oem_table_id, ACPI_OEM_TABLE_ID_SIZE);
+ mcfg_oem_revision = header->revision;
+
pr_info("MCFG table detected, %d entries\n", n);
return 0;
}
--
2.9.3
From 2243ab64c12a873e47b72c8e636b40ed09c5f0d4 Mon Sep 17 00:00:00 2001
From: Tomasz Nowicki <tn@semihalf.com>
Date: Fri, 9 Sep 2016 21:24:05 +0200
Subject: [PATCH 3/6] PCI: thunder-pem: Allow to probe PEM-specific register
range for ACPI case
thunder-pem driver stands for being ACPI based PCI host controller.
However, there is no standard way to describe its PEM-specific register
ranges in ACPI tables. Thus we add thunder_pem_init() ACPI extension
to obtain hardcoded addresses from static resource array.
Although it is not pretty, it prevents from creating standard mechanism to
handle similar cases in future.
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
---
drivers/pci/host/pci-thunder-pem.c | 61 ++++++++++++++++++++++++++++++--------
1 file changed, 48 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index 6abaf80..b048761 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
+#include <linux/pci-acpi.h>
#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
@@ -284,6 +285,40 @@ static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn,
return pci_generic_config_write(bus, devfn, where, size, val);
}
+#ifdef CONFIG_ACPI
+static struct resource thunder_pem_reg_res[] = {
+ [4] = DEFINE_RES_MEM(0x87e0c0000000UL, SZ_16M),
+ [5] = DEFINE_RES_MEM(0x87e0c1000000UL, SZ_16M),
+ [6] = DEFINE_RES_MEM(0x87e0c2000000UL, SZ_16M),
+ [7] = DEFINE_RES_MEM(0x87e0c3000000UL, SZ_16M),
+ [8] = DEFINE_RES_MEM(0x87e0c4000000UL, SZ_16M),
+ [9] = DEFINE_RES_MEM(0x87e0c5000000UL, SZ_16M),
+ [14] = DEFINE_RES_MEM(0x97e0c0000000UL, SZ_16M),
+ [15] = DEFINE_RES_MEM(0x97e0c1000000UL, SZ_16M),
+ [16] = DEFINE_RES_MEM(0x97e0c2000000UL, SZ_16M),
+ [17] = DEFINE_RES_MEM(0x97e0c3000000UL, SZ_16M),
+ [18] = DEFINE_RES_MEM(0x97e0c4000000UL, SZ_16M),
+ [19] = DEFINE_RES_MEM(0x97e0c5000000UL, SZ_16M),
+};
+
+static struct resource *thunder_pem_acpi_res(struct pci_config_window *cfg)
+{
+ struct acpi_device *adev = to_acpi_device(cfg->parent);
+ struct acpi_pci_root *root = acpi_driver_data(adev);
+
+ if ((root->segment >= 4 && root->segment <= 9) ||
+ (root->segment >= 14 && root->segment <= 19))
+ return &thunder_pem_reg_res[root->segment];
+
+ return NULL;
+}
+#else
+static struct resource *thunder_pem_acpi_res(struct pci_config_window *cfg)
+{
+ return NULL;
+}
+#endif
+
static int thunder_pem_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
@@ -292,24 +327,24 @@ static int thunder_pem_init(struct pci_config_window *cfg)
struct thunder_pem_pci *pem_pci;
struct platform_device *pdev;
- /* Only OF support for now */
- if (!dev->of_node)
- return -EINVAL;
-
pem_pci = devm_kzalloc(dev, sizeof(*pem_pci), GFP_KERNEL);
if (!pem_pci)
return -ENOMEM;
- pdev = to_platform_device(dev);
-
- /*
- * The second register range is the PEM bridge to the PCIe
- * bus. It has a different config access method than those
- * devices behind the bridge.
- */
- res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (acpi_disabled) {
+ pdev = to_platform_device(dev);
+
+ /*
+ * The second register range is the PEM bridge to the PCIe
+ * bus. It has a different config access method than those
+ * devices behind the bridge.
+ */
+ res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ } else {
+ res_pem = thunder_pem_acpi_res(cfg);
+ }
if (!res_pem) {
- dev_err(dev, "missing \"reg[1]\"property\n");
+ dev_err(dev, "missing configuration region\n");
return -EINVAL;
}
--
2.9.3
From 443d85d47ee00b3f0b6f39d470a11e7eb116817d Mon Sep 17 00:00:00 2001
From: Tomasz Nowicki <tn@semihalf.com>
Date: Fri, 9 Sep 2016 21:24:06 +0200
Subject: [PATCH 4/6] PCI: thunder: Enable ACPI PCI controller for ThunderX
pass2.x silicon version
ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully
compliant with ECAM standard. It uses non-standard configuration space
accessors (see pci_thunder_pem_ops) and custom configuration space granulation
(see bus_shift = 24). In order to access configuration space and
probe PEM as ACPI based PCI host controller we need to add MCFG quirk
infrastructure. This involves:
1. Export PEM pci_thunder_pem_ops structure so it is visible to MCFG quirk
code.
2. New quirk entries for each PEM segment. Each contains platform IDs,
mentioned pci_thunder_pem_ops and CFG resources.
Quirk is considered for ThunderX silicon pass2.x only which is identified
via MCFG revision 1.
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
---
drivers/acpi/pci_mcfg.c | 27 +++++++++++++++++++++++++++
drivers/pci/host/pci-thunder-pem.c | 2 +-
include/linux/pci-ecam.h | 4 ++++
3 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 2b8acc7..1f73d7b 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -51,6 +51,33 @@ struct mcfg_fixup {
static struct mcfg_fixup mcfg_quirks[] = {
/* { OEM_ID, OEM_TABLE_ID, REV, DOMAIN, BUS_RANGE, cfgres, ops }, */
+#ifdef CONFIG_PCI_HOST_THUNDER_PEM
+ /* SoC pass2.x */
+ { "CAVIUM", "THUNDERX", 1, 4, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x88001f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 1, 5, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x884057000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 1, 6, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x88808f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 1, 7, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x89001f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 1, 8, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x894057000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 1, 9, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x89808f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 1, 14, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x98001f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 1, 15, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x984057000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 1, 16, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x98808f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 1, 17, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x99001f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 1, 18, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x994057000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 1, 19, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x99808f000000UL, 0x39 * SZ_16M) },
+#endif
};
static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index b048761..d7c10cc 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -367,7 +367,7 @@ static int thunder_pem_init(struct pci_config_window *cfg)
return 0;
}
-static struct pci_ecam_ops pci_thunder_pem_ops = {
+struct pci_ecam_ops pci_thunder_pem_ops = {
.bus_shift = 24,
.init = thunder_pem_init,
.pci_ops = {
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index 7adad20..65505ea 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -58,6 +58,10 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn,
int where);
/* default ECAM ops */
extern struct pci_ecam_ops pci_generic_ecam_ops;
+/* ECAM ops for known quirks */
+#ifdef CONFIG_PCI_HOST_THUNDER_PEM
+extern struct pci_ecam_ops pci_thunder_pem_ops;
+#endif
#ifdef CONFIG_PCI_HOST_GENERIC
/* for DT-based PCI controllers that support ECAM */
--
2.9.3
From 6eca99cc392a11bb07b9ef88bca71a85f8bbe273 Mon Sep 17 00:00:00 2001
From: Tomasz Nowicki <tn@semihalf.com>
Date: Fri, 9 Sep 2016 21:24:07 +0200
Subject: [PATCH 5/6] PCI: thunder: Enable ACPI PCI controller for ThunderX
pass1.x silicon version
ThunderX pass1.x requires to emulate the EA headers for on-chip devices
hence it has to use custom pci_thunder_ecam_ops for accessing PCI config
space (pci-thuner-ecam.c). Add new entries to MCFG quirk array where they
can be applied while probing ACPI based PCI host controller.
ThunderX pass1.x is using the same way for accessing off-chip devices
(so-called PEM) as silicon pass-2.x so we need to add PEM quirk
entries too.
Quirk is considered for ThunderX silicon pass1.x only which is identified
via MCFG revision 2.
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
---
drivers/acpi/pci_mcfg.c | 45 +++++++++++++++++++++++++++++++++++++
drivers/pci/host/pci-thunder-ecam.c | 2 +-
include/linux/pci-ecam.h | 3 +++
3 files changed, 49 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 1f73d7b..eb14f74 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -77,6 +77,51 @@ static struct mcfg_fixup mcfg_quirks[] = {
DEFINE_RES_MEM(0x994057000000UL, 0x39 * SZ_16M) },
{ "CAVIUM", "THUNDERX", 1, 19, MCFG_BUS_ANY, &pci_thunder_pem_ops,
DEFINE_RES_MEM(0x99808f000000UL, 0x39 * SZ_16M) },
+
+ /* SoC pass1.x */
+ { "CAVIUM", "THUNDERX", 2, 4, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x88001f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 2, 5, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x884057000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 2, 6, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x88808f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 2, 7, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x89001f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 2, 8, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x894057000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 2, 9, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x89808f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 2, 14, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x98001f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 2, 15, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x984057000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 2, 16, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x98808f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 2, 17, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x99001f000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 2, 18, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x994057000000UL, 0x39 * SZ_16M) },
+ { "CAVIUM", "THUNDERX", 2, 19, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ DEFINE_RES_MEM(0x99808f000000UL, 0x39 * SZ_16M) },
+#endif
+#ifdef CONFIG_PCI_HOST_THUNDER_ECAM
+ /* SoC pass1.x */
+ { "CAVIUM", "THUNDERX", 2, 0, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
+ MCFG_RES_EMPTY},
+ { "CAVIUM", "THUNDERX", 2, 1, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
+ MCFG_RES_EMPTY},
+ { "CAVIUM", "THUNDERX", 2, 2, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
+ MCFG_RES_EMPTY},
+ { "CAVIUM", "THUNDERX", 2, 3, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
+ MCFG_RES_EMPTY},
+ { "CAVIUM", "THUNDERX", 2, 10, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
+ MCFG_RES_EMPTY},
+ { "CAVIUM", "THUNDERX", 2, 11, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
+ MCFG_RES_EMPTY},
+ { "CAVIUM", "THUNDERX", 2, 12, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
+ MCFG_RES_EMPTY},
+ { "CAVIUM", "THUNDERX", 2, 13, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
+ MCFG_RES_EMPTY},
#endif
};
diff --git a/drivers/pci/host/pci-thunder-ecam.c b/drivers/pci/host/pci-thunder-ecam.c
index d50a3dc..b6c17e2 100644
--- a/drivers/pci/host/pci-thunder-ecam.c
+++ b/drivers/pci/host/pci-thunder-ecam.c
@@ -346,7 +346,7 @@ static int thunder_ecam_config_write(struct pci_bus *bus, unsigned int devfn,
return pci_generic_config_write(bus, devfn, where, size, val);
}
-static struct pci_ecam_ops pci_thunder_ecam_ops = {
+struct pci_ecam_ops pci_thunder_ecam_ops = {
.bus_shift = 20,
.pci_ops = {
.map_bus = pci_ecam_map_bus,
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index 65505ea..35f0e81 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -62,6 +62,9 @@ extern struct pci_ecam_ops pci_generic_ecam_ops;
#ifdef CONFIG_PCI_HOST_THUNDER_PEM
extern struct pci_ecam_ops pci_thunder_pem_ops;
#endif
+#ifdef CONFIG_PCI_HOST_THUNDER_ECAM
+extern struct pci_ecam_ops pci_thunder_ecam_ops;
+#endif
#ifdef CONFIG_PCI_HOST_GENERIC
/* for DT-based PCI controllers that support ECAM */
--
2.9.3
From 3080ac5bb527155ccdf8490ce221b1c6ad01f502 Mon Sep 17 00:00:00 2001
From: Duc Dang <dhdang@apm.com>
Date: Sat, 17 Sep 2016 07:24:38 -0700
Subject: [PATCH 6/6] PCI/ACPI: xgene: Add ECAM quirk for X-Gene PCIe
controller
PCIe controller in X-Gene SoCs is not ECAM compliant: software
needs to configure additional concontroller register to address
device at bus:dev:function.
This patch depends on "ECAM quirks handling for ARM64 platforms"
series (http://www.spinics.net/lists/arm-kernel/msg530692.html)
to address the limitation above for X-Gene PCIe controller.
The quirk will only be applied for X-Gene PCIe MCFG table with
OEM revison 1, 2, 3 or 4 (PCIe controller v1 and v2 on X-Gene SoCs).
Signed-off-by: Duc Dang <dhdang@apm.com>
---
drivers/acpi/pci_mcfg.c | 32 +++++
drivers/pci/host/Makefile | 2 +-
drivers/pci/host/pci-xgene-ecam.c | 280 ++++++++++++++++++++++++++++++++++++++
include/linux/pci-ecam.h | 5 +
4 files changed, 318 insertions(+), 1 deletion(-)
create mode 100644 drivers/pci/host/pci-xgene-ecam.c
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index eb14f74..635ab24 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -123,6 +123,38 @@ static struct mcfg_fixup mcfg_quirks[] = {
{ "CAVIUM", "THUNDERX", 2, 13, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
MCFG_RES_EMPTY},
#endif
+#ifdef CONFIG_PCI_XGENE
+ {"APM ", "XGENE ", 1, 0, MCFG_BUS_ANY,
+ &xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 1, 1, MCFG_BUS_ANY,
+ &xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 1, 2, MCFG_BUS_ANY,
+ &xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 1, 3, MCFG_BUS_ANY,
+ &xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 1, 4, MCFG_BUS_ANY,
+ &xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 2, 0, MCFG_BUS_ANY,
+ &xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 2, 1, MCFG_BUS_ANY,
+ &xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 2, 2, MCFG_BUS_ANY,
+ &xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 2, 3, MCFG_BUS_ANY,
+ &xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 2, 4, MCFG_BUS_ANY,
+ &xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 3, 0, MCFG_BUS_ANY,
+ &xgene_v2_1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 3, 1, MCFG_BUS_ANY,
+ &xgene_v2_1_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 4, 0, MCFG_BUS_ANY,
+ &xgene_v2_2_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 4, 1, MCFG_BUS_ANY,
+ &xgene_v2_2_pcie_ecam_ops, MCFG_RES_EMPTY},
+ {"APM ", "XGENE ", 4, 2, MCFG_BUS_ANY,
+ &xgene_v2_2_pcie_ecam_ops, MCFG_RES_EMPTY},
+#endif
};
static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 8843410..af4f505 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
-obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
+obj-$(CONFIG_PCI_XGENE) += pci-xgene.o pci-xgene-ecam.o
obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
diff --git a/drivers/pci/host/pci-xgene-ecam.c b/drivers/pci/host/pci-xgene-ecam.c
new file mode 100644
index 0000000..b66a04f
--- /dev/null
+++ b/drivers/pci/host/pci-xgene-ecam.c
@@ -0,0 +1,280 @@
+/*
+ * APM X-Gene PCIe ECAM fixup driver
+ *
+ * Copyright (c) 2016, Applied Micro Circuits Corporation
+ * Author:
+ * Duc Dang <dhdang@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/platform_device.h>
+#include <linux/pci-ecam.h>
+
+#ifdef CONFIG_ACPI
+#define RTDID 0x160
+#define ROOT_CAP_AND_CTRL 0x5C
+
+/* PCIe IP version */
+#define XGENE_PCIE_IP_VER_UNKN 0
+#define XGENE_PCIE_IP_VER_1 1
+#define XGENE_PCIE_IP_VER_2 2
+
+#define XGENE_CSR_LENGTH 0x10000
+
+struct xgene_pcie_acpi_root {
+ void __iomem *csr_base;
+ u32 version;
+};
+
+static int xgene_v1_pcie_ecam_init(struct pci_config_window *cfg)
+{
+ struct xgene_pcie_acpi_root *xgene_root;
+ struct device *dev = cfg->parent;
+ u32 csr_base;
+
+ xgene_root = devm_kzalloc(dev, sizeof(*xgene_root), GFP_KERNEL);
+ if (!xgene_root)
+ return -ENOMEM;
+
+ switch (cfg->res.start) {
+ case 0xE0D0000000ULL:
+ csr_base = 0x1F2B0000;
+ break;
+ case 0xD0D0000000ULL:
+ csr_base = 0x1F2C0000;
+ break;
+ case 0x90D0000000ULL:
+ csr_base = 0x1F2D0000;
+ break;
+ case 0xA0D0000000ULL:
+ csr_base = 0x1F500000;
+ break;
+ case 0xC0D0000000ULL:
+ csr_base = 0x1F510000;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ xgene_root->csr_base = ioremap(csr_base, XGENE_CSR_LENGTH);
+ if (!xgene_root->csr_base) {
+ kfree(xgene_root);
+ return -ENODEV;
+ }
+
+ xgene_root->version = XGENE_PCIE_IP_VER_1;
+
+ cfg->priv = xgene_root;
+
+ return 0;
+}
+
+static int xgene_v2_1_pcie_ecam_init(struct pci_config_window *cfg)
+{
+ struct xgene_pcie_acpi_root *xgene_root;
+ struct device *dev = cfg->parent;
+ resource_size_t csr_base;
+
+ xgene_root = devm_kzalloc(dev, sizeof(*xgene_root), GFP_KERNEL);
+ if (!xgene_root)
+ return -ENOMEM;
+
+ switch (cfg->res.start) {
+ case 0xC0D0000000ULL:
+ csr_base = 0x1F2B0000;
+ break;
+ case 0xA0D0000000ULL:
+ csr_base = 0x1F2C0000;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ xgene_root->csr_base = ioremap(csr_base, XGENE_CSR_LENGTH);
+ if (!xgene_root->csr_base) {
+ kfree(xgene_root);
+ return -ENODEV;
+ }
+
+ xgene_root->version = XGENE_PCIE_IP_VER_2;
+
+ cfg->priv = xgene_root;
+
+ return 0;
+}
+
+static int xgene_v2_2_pcie_ecam_init(struct pci_config_window *cfg)
+{
+ struct xgene_pcie_acpi_root *xgene_root;
+ struct device *dev = cfg->parent;
+ resource_size_t csr_base;
+
+ xgene_root = devm_kzalloc(dev, sizeof(*xgene_root), GFP_KERNEL);
+ if (!xgene_root)
+ return -ENOMEM;
+
+ switch (cfg->res.start) {
+ case 0xE0D0000000ULL:
+ csr_base = 0x1F2B0000;
+ break;
+ case 0xA0D0000000ULL:
+ csr_base = 0x1F500000;
+ break;
+ case 0x90D0000000ULL:
+ csr_base = 0x1F2D0000;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ xgene_root->csr_base = ioremap(csr_base, XGENE_CSR_LENGTH);
+ if (!xgene_root->csr_base) {
+ kfree(xgene_root);
+ return -ENODEV;
+ }
+
+ xgene_root->version = XGENE_PCIE_IP_VER_2;
+
+ cfg->priv = xgene_root;
+
+ return 0;
+}
+/*
+ * For Configuration request, RTDID register is used as Bus Number,
+ * Device Number and Function number of the header fields.
+ */
+static void xgene_pcie_set_rtdid_reg(struct pci_bus *bus, uint devfn)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ struct xgene_pcie_acpi_root *port = cfg->priv;
+ unsigned int b, d, f;
+ u32 rtdid_val = 0;
+
+ b = bus->number;
+ d = PCI_SLOT(devfn);
+ f = PCI_FUNC(devfn);
+
+ if (!pci_is_root_bus(bus))
+ rtdid_val = (b << 8) | (d << 3) | f;
+
+ writel(rtdid_val, port->csr_base + RTDID);
+ /* read the register back to ensure flush */
+ readl(port->csr_base + RTDID);
+}
+
+/*
+ * X-Gene PCIe port uses BAR0-BAR1 of RC's configuration space as
+ * the translation from PCI bus to native BUS. Entire DDR region
+ * is mapped into PCIe space using these registers, so it can be
+ * reached by DMA from EP devices. The BAR0/1 of bridge should be
+ * hidden during enumeration to avoid the sizing and resource allocation
+ * by PCIe core.
+ */
+static bool xgene_pcie_hide_rc_bars(struct pci_bus *bus, int offset)
+{
+ if (pci_is_root_bus(bus) && ((offset == PCI_BASE_ADDRESS_0) ||
+ (offset == PCI_BASE_ADDRESS_1)))
+ return true;
+
+ return false;
+}
+
+void __iomem *xgene_pcie_ecam_map_bus(struct pci_bus *bus,
+ unsigned int devfn, int where)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ unsigned int busn = bus->number;
+ void __iomem *base;
+
+ if (busn < cfg->busr.start || busn > cfg->busr.end)
+ return NULL;
+
+ if ((pci_is_root_bus(bus) && devfn != 0) ||
+ xgene_pcie_hide_rc_bars(bus, where))
+ return NULL;
+
+ xgene_pcie_set_rtdid_reg(bus, devfn);
+
+ if (busn > cfg->busr.start)
+ base = cfg->win + (1 << cfg->ops->bus_shift);
+ else
+ base = cfg->win;
+
+ return base + where;
+}
+
+static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ struct xgene_pcie_acpi_root *port = cfg->priv;
+
+ if (pci_generic_config_read32(bus, devfn, where & ~0x3, 4, val) !=
+ PCIBIOS_SUCCESSFUL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * The v1 controller has a bug in its Configuration Request
+ * Retry Status (CRS) logic: when CRS is enabled and we read the
+ * Vendor and Device ID of a non-existent device, the controller
+ * fabricates return data of 0xFFFF0001 ("device exists but is not
+ * ready") instead of 0xFFFFFFFF ("device does not exist"). This
+ * causes the PCI core to retry the read until it times out.
+ * Avoid this by not claiming to support CRS.
+ */
+ if (pci_is_root_bus(bus) && (port->version == XGENE_PCIE_IP_VER_1) &&
+ ((where & ~0x3) == ROOT_CAP_AND_CTRL))
+ *val &= ~(PCI_EXP_RTCAP_CRSVIS << 16);
+
+ if (size <= 2)
+ *val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ecam_ops xgene_v1_pcie_ecam_ops = {
+ .bus_shift = 16,
+ .init = xgene_v1_pcie_ecam_init,
+ .pci_ops = {
+ .map_bus = xgene_pcie_ecam_map_bus,
+ .read = xgene_pcie_config_read32,
+ .write = pci_generic_config_write,
+ }
+};
+
+struct pci_ecam_ops xgene_v2_1_pcie_ecam_ops = {
+ .bus_shift = 16,
+ .init = xgene_v2_1_pcie_ecam_init,
+ .pci_ops = {
+ .map_bus = xgene_pcie_ecam_map_bus,
+ .read = xgene_pcie_config_read32,
+ .write = pci_generic_config_write,
+ }
+};
+
+struct pci_ecam_ops xgene_v2_2_pcie_ecam_ops = {
+ .bus_shift = 16,
+ .init = xgene_v2_2_pcie_ecam_init,
+ .pci_ops = {
+ .map_bus = xgene_pcie_ecam_map_bus,
+ .read = xgene_pcie_config_read32,
+ .write = pci_generic_config_write,
+ }
+};
+#endif
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index 35f0e81..40da3e7 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -65,6 +65,11 @@ extern struct pci_ecam_ops pci_thunder_pem_ops;
#ifdef CONFIG_PCI_HOST_THUNDER_ECAM
extern struct pci_ecam_ops pci_thunder_ecam_ops;
#endif
+#ifdef CONFIG_PCI_XGENE
+extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops;
+extern struct pci_ecam_ops xgene_v2_1_pcie_ecam_ops;
+extern struct pci_ecam_ops xgene_v2_2_pcie_ecam_ops;
+#endif
#ifdef CONFIG_PCI_HOST_GENERIC
/* for DT-based PCI controllers that support ECAM */
--
2.9.3