drivers/staging/Kconfig | 2 +
drivers/staging/Makefile | 1 +
drivers/staging/lirc/Kconfig | 106 +++
drivers/staging/lirc/Makefile | 18 +
drivers/staging/lirc/TODO | 8 +
drivers/staging/lirc/TODO.lirc_i2c | 3 +
drivers/staging/lirc/lirc_bt829.c | 383 +++++++++
drivers/staging/lirc/lirc_ene0100.c | 646 ++++++++++++++
drivers/staging/lirc/lirc_ene0100.h | 169 ++++
drivers/staging/lirc/lirc_i2c.c | 536 ++++++++++++
drivers/staging/lirc/lirc_igorplugusb.c | 555 ++++++++++++
drivers/staging/lirc/lirc_imon.c | 1058 +++++++++++++++++++++++
drivers/staging/lirc/lirc_it87.c | 1022 +++++++++++++++++++++++
drivers/staging/lirc/lirc_it87.h | 116 +++
drivers/staging/lirc/lirc_ite8709.c | 542 ++++++++++++
drivers/staging/lirc/lirc_parallel.c | 705 ++++++++++++++++
drivers/staging/lirc/lirc_parallel.h | 26 +
drivers/staging/lirc/lirc_sasem.c | 933 +++++++++++++++++++++
drivers/staging/lirc/lirc_serial.c | 1313 +++++++++++++++++++++++++++++
drivers/staging/lirc/lirc_sir.c | 1282 ++++++++++++++++++++++++++++
drivers/staging/lirc/lirc_ttusbir.c | 396 +++++++++
drivers/staging/lirc/lirc_zilog.c | 1387 +++++++++++++++++++++++++++++++
22 files changed, 11206 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 984a754..9296517 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -147,5 +147,7 @@ source "drivers/staging/mrst-touchscreen/Kconfig"
source "drivers/staging/msm/Kconfig"
+source "drivers/staging/lirc/Kconfig"
+
endif # !STAGING_EXCLUDE_BUILD
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 9fa2513..6c5b523 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_SLICOSS) += slicoss/
obj-$(CONFIG_VIDEO_GO7007) += go7007/
obj-$(CONFIG_VIDEO_CX25821) += cx25821/
obj-$(CONFIG_VIDEO_TM6000) += tm6000/
+obj-$(CONFIG_LIRC_STAGING) += lirc/
obj-$(CONFIG_USB_IP_COMMON) += usbip/
obj-$(CONFIG_W35UND) += winbond/
obj-$(CONFIG_PRISM2_USB) += wlan-ng/
diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig
new file mode 100644
index 0000000..ab30a09
--- /dev/null
+++ b/drivers/staging/lirc/Kconfig
@@ -0,0 +1,105 @@
+#
+# LIRC driver(s) configuration
+#
+menuconfig LIRC_STAGING
+ bool "Linux Infrared Remote Control IR receiver/transmitter drivers"
+ depends on LIRC
+ help
+ Say Y here, and all supported Linux Infrared Remote Control IR and
+ RF receiver and transmitter drivers will be displayed. When paired
+ with a remote control and the lirc daemon, the receiver drivers
+ allow control of your Linux system via remote control.
+
+if LIRC_STAGING
+
+config LIRC_BT829
+ tristate "BT829 based hardware"
+ depends on LIRC_STAGING && PCI
+ help
+ Driver for the IR interface on BT829-based hardware
+
+config LIRC_ENE0100
+ tristate "ENE KB3924/ENE0100 CIR Port Reciever"
+ depends on LIRC_STAGING && PNP
+ help
+ This is a driver for CIR port handled by ENE KB3924 embedded
+ controller found on some notebooks.
+ It appears on PNP list as ENE0100.
+
+config LIRC_I2C
+ tristate "I2C Based IR Receivers"
+ depends on LIRC_STAGING && I2C
+ help
+ Driver for I2C-based IR receivers, such as those commonly
+ found onboard Hauppauge PVR-150/250/350 video capture cards
+
+config LIRC_IGORPLUGUSB
+ tristate "Igor Cesko's USB IR Receiver"
+ depends on LIRC_STAGING && USB
+ help
+ Driver for Igor Cesko's USB IR Receiver
+
+config LIRC_IMON
+ tristate "Legacy SoundGraph iMON Receiver and Display"
+ depends on LIRC_STAGING && USB
+ help
+ Driver for the original SoundGraph iMON IR Receiver and Display
+
+ Current generation iMON devices use the input layer imon driver.
+
+config LIRC_IT87
+ tristate "ITE IT87XX CIR Port Receiver"
+ depends on LIRC_STAGING && PNP
+ help
+ Driver for the ITE IT87xx IR Receiver
+
+config LIRC_ITE8709
+ tristate "ITE8709 CIR Port Receiver"
+ depends on LIRC_STAGING && PNP
+ help
+ Driver for the ITE8709 IR Receiver
+
+config LIRC_PARALLEL
+ tristate "Homebrew Parallel Port Receiver"
+ depends on LIRC_STAGING && PARPORT && !SMP
+ help
+ Driver for Homebrew Parallel Port Receivers
+
+config LIRC_SASEM
+ tristate "Sasem USB IR Remote"
+ depends on LIRC_STAGING && USB
+ help
+ Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module
+
+config LIRC_SERIAL
+ tristate "Homebrew Serial Port Receiver"
+ depends on LIRC_STAGING
+ help
+ Driver for Homebrew Serial Port Receivers
+
+config LIRC_SERIAL_TRANSMITTER
+ bool "Serial Port Transmitter"
+ default y
+ depends on LIRC_SERIAL
+ help
+ Serial Port Transmitter support
+
+config LIRC_SIR
+ tristate "Built-in SIR IrDA port"
+ depends on LIRC_STAGING
+ help
+ Driver for the SIR IrDA port
+
+config LIRC_TTUSBIR
+ tristate "Technotrend USB IR Receiver"
+ depends on LIRC_STAGING && USB
+ help
+ Driver for the Technotrend USB IR Receiver
+
+config LIRC_ZILOG
+ tristate "Zilog/Hauppauge IR Transmitter"
+ depends on LIRC_STAGING && I2C
+ help
+ Driver for the Zilog/Hauppauge IR Transmitter, found on
+ PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards
+endif
diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/lirc/Makefile
new file mode 100644
index 0000000..a019182
--- /dev/null
+++ b/drivers/staging/lirc/Makefile
@@ -0,0 +1,18 @@
+# Makefile for the lirc drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o
+obj-$(CONFIG_LIRC_ENE0100) += lirc_ene0100.o
+obj-$(CONFIG_LIRC_I2C) += lirc_i2c.o
+obj-$(CONFIG_LIRC_IGORPLUGUSB) += lirc_igorplugusb.o
+obj-$(CONFIG_LIRC_IMON) += lirc_imon.o
+obj-$(CONFIG_LIRC_IT87) += lirc_it87.o
+obj-$(CONFIG_LIRC_ITE8709) += lirc_ite8709.o
+obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o
+obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o
+obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o
+obj-$(CONFIG_LIRC_SIR) += lirc_sir.o
+obj-$(CONFIG_LIRC_TTUSBIR) += lirc_ttusbir.o
+obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o
diff --git a/drivers/staging/lirc/TODO b/drivers/staging/lirc/TODO
new file mode 100644
index 0000000..b6cb593
--- /dev/null
+++ b/drivers/staging/lirc/TODO
@@ -0,0 +1,8 @@
+- All drivers should either be ported to ir-core, or dropped entirely
+ (see drivers/media/IR/mceusb.c vs. lirc_mceusb.c in lirc cvs for an
+ example of a previously completed port).
+
+Please send patches to:
+Jarod Wilson <jarod@wilsonet.com>
+Greg Kroah-Hartman <greg@kroah.com>
+
diff --git a/drivers/staging/lirc/TODO.lirc_i2c b/drivers/staging/lirc/TODO.lirc_i2c
new file mode 100644
index 0000000..1f0a6ff
--- /dev/null
+++ b/drivers/staging/lirc/TODO.lirc_i2c
@@ -0,0 +1,3 @@
+lirc_i2c provides support for some drivers that have already a RC
+driver under drivers/media/video. It should be integrated into those
+drivers, in special with drivers/media/video/ir-kbd-i2c.c.
diff --git a/drivers/staging/lirc/lirc_bt829.c b/drivers/staging/lirc/lirc_bt829.c
new file mode 100644
index 0000000..3388102
--- /dev/null
+++ b/drivers/staging/lirc/lirc_bt829.c
@@ -0,0 +1,383 @@
+/*
+ * Remote control driver for the TV-card based on bt829
+ *
+ * by Leonid Froenchenko <lfroen@galileo.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/threads.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <media/lirc_dev.h>
+
+static int poll_main(void);
+static int atir_init_start(void);
+
+static void write_index(unsigned char index, unsigned int value);
+static unsigned int read_index(unsigned char index);
+
+static void do_i2c_start(void);
+static void do_i2c_stop(void);
+
+static void seems_wr_byte(unsigned char al);
+static unsigned char seems_rd_byte(void);
+
+static unsigned int read_index(unsigned char al);
+static void write_index(unsigned char ah, unsigned int edx);
+
+static void cycle_delay(int cycle);
+
+static void do_set_bits(unsigned char bl);
+static unsigned char do_get_bits(void);
+
+#define DATA_PCI_OFF 0x7FFC00
+#define WAIT_CYCLE 20
+
+#define DRIVER_NAME "lirc_bt829"
+
+static int debug;
+#define dprintk(fmt, args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG DRIVER_NAME ": "fmt, ## args); \
+ } while (0)
+
+static int atir_minor;
+static unsigned long pci_addr_phys;
+static unsigned char *pci_addr_lin;
+
+static struct lirc_driver atir_driver;
+
+static struct pci_dev *do_pci_probe(void)
+{
+ struct pci_dev *my_dev;
+ my_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+ PCI_DEVICE_ID_ATI_264VT, NULL);
+ if (my_dev) {
+ printk(KERN_ERR DRIVER_NAME ": Using device: %s\n",
+ pci_name(my_dev));
+ pci_addr_phys = 0;
+ if (my_dev->resource[0].flags & IORESOURCE_MEM) {
+ pci_addr_phys = my_dev->resource[0].start;
+ printk(KERN_INFO DRIVER_NAME ": memory at 0x%08X\n",
+ (unsigned int)pci_addr_phys);
+ }
+ if (pci_addr_phys == 0) {
+ printk(KERN_ERR DRIVER_NAME ": no memory resource ?\n");
+ return NULL;
+ }
+ } else {
+ printk(KERN_ERR DRIVER_NAME ": pci_probe failed\n");
+ return NULL;
+ }
+ return my_dev;
+}
+
+static int atir_add_to_buf(void *data, struct lirc_buffer *buf)
+{
+ unsigned char key;
+ int status;
+ status = poll_main();
+ key = (status >> 8) & 0xFF;
+ if (status & 0xFF) {
+ dprintk("reading key %02X\n", key);
+ lirc_buffer_write(buf, &key);
+ return 0;
+ }
+ return -ENODATA;
+}
+
+static int atir_set_use_inc(void *data)
+{
+ dprintk("driver is opened\n");
+ return 0;
+}
+
+static void atir_set_use_dec(void *data)
+{
+ dprintk("driver is closed\n");
+}
+
+int init_module(void)
+{
+ struct pci_dev *pdev;
+
+ pdev = do_pci_probe();
+ if (pdev == NULL)
+ return 1;
+
+ if (!atir_init_start())
+ return 1;
+
+ strcpy(atir_driver.name, "ATIR");
+ atir_driver.minor = -1;
+ atir_driver.code_length = 8;
+ atir_driver.sample_rate = 10;
+ atir_driver.data = 0;
+ atir_driver.add_to_buf = atir_add_to_buf;
+ atir_driver.set_use_inc = atir_set_use_inc;
+ atir_driver.set_use_dec = atir_set_use_dec;
+ atir_driver.dev = &pdev->dev;
+ atir_driver.owner = THIS_MODULE;
+
+ atir_minor = lirc_register_driver(&atir_driver);
+ if (atir_minor < 0) {
+ printk(KERN_ERR DRIVER_NAME ": failed to register driver!\n");
+ return atir_minor;
+ }
+ dprintk("driver is registered on minor %d\n", atir_minor);
+
+ return 0;
+}
+
+
+void cleanup_module(void)
+{
+ lirc_unregister_driver(atir_minor);
+}
+
+
+static int atir_init_start(void)
+{
+ pci_addr_lin = ioremap(pci_addr_phys + DATA_PCI_OFF, 0x400);
+ if (pci_addr_lin == 0) {
+ printk(KERN_INFO DRIVER_NAME ": pci mem must be mapped\n");
+ return 0;
+ }
+ return 1;
+}
+
+static void cycle_delay(int cycle)
+{
+ udelay(WAIT_CYCLE*cycle);
+}
+
+
+static int poll_main()
+{
+ unsigned char status_high, status_low;
+
+ do_i2c_start();
+
+ seems_wr_byte(0xAA);
+ seems_wr_byte(0x01);
+
+ do_i2c_start();
+
+ seems_wr_byte(0xAB);
+
+ status_low = seems_rd_byte();
+ status_high = seems_rd_byte();
+
+ do_i2c_stop();
+
+ return (status_high << 8) | status_low;
+}
+
+static void do_i2c_start(void)
+{
+ do_set_bits(3);
+ cycle_delay(4);
+
+ do_set_bits(1);
+ cycle_delay(7);
+
+ do_set_bits(0);
+ cycle_delay(2);
+}
+
+static void do_i2c_stop(void)
+{
+ unsigned char bits;
+ bits = do_get_bits() & 0xFD;
+ do_set_bits(bits);
+ cycle_delay(1);
+
+ bits |= 1;
+ do_set_bits(bits);
+ cycle_delay(2);
+
+ bits |= 2;
+ do_set_bits(bits);
+ bits = 3;
+ do_set_bits(bits);
+ cycle_delay(2);
+}
+
+static void seems_wr_byte(unsigned char value)
+{
+ int i;
+ unsigned char reg;
+
+ reg = do_get_bits();
+ for (i = 0; i < 8; i++) {
+ if (value & 0x80)
+ reg |= 0x02;
+ else
+ reg &= 0xFD;
+
+ do_set_bits(reg);
+ cycle_delay(1);
+
+ reg |= 1;
+ do_set_bits(reg);
+ cycle_delay(1);
+
+ reg &= 0xFE;
+ do_set_bits(reg);
+ cycle_delay(1);
+ value <<= 1;
+ }
+ cycle_delay(2);
+
+ reg |= 2;
+ do_set_bits(reg);
+
+ reg |= 1;
+ do_set_bits(reg);
+
+ cycle_delay(1);
+ do_get_bits();
+
+ reg &= 0xFE;
+ do_set_bits(reg);
+ cycle_delay(3);
+}
+
+static unsigned char seems_rd_byte(void)
+{
+ int i;
+ int rd_byte;
+ unsigned char bits_2, bits_1;
+
+ bits_1 = do_get_bits() | 2;
+ do_set_bits(bits_1);
+
+ rd_byte = 0;
+ for (i = 0; i < 8; i++) {
+ bits_1 &= 0xFE;
+ do_set_bits(bits_1);
+ cycle_delay(2);
+
+ bits_1 |= 1;
+ do_set_bits(bits_1);
+ cycle_delay(1);
+
+ bits_2 = do_get_bits();
+ if (bits_2 & 2)
+ rd_byte |= 1;
+
+ rd_byte <<= 1;
+ }
+
+ bits_1 = 0;
+ if (bits_2 == 0)
+ bits_1 |= 2;
+
+ do_set_bits(bits_1);
+ cycle_delay(2);
+
+ bits_1 |= 1;
+ do_set_bits(bits_1);
+ cycle_delay(3);
+
+ bits_1 &= 0xFE;
+ do_set_bits(bits_1);
+ cycle_delay(2);
+
+ rd_byte >>= 1;
+ rd_byte &= 0xFF;
+ return rd_byte;
+}
+
+static void do_set_bits(unsigned char new_bits)
+{
+ int reg_val;
+ reg_val = read_index(0x34);
+ if (new_bits & 2) {
+ reg_val &= 0xFFFFFFDF;
+ reg_val |= 1;
+ } else {
+ reg_val &= 0xFFFFFFFE;
+ reg_val |= 0x20;
+ }
+ reg_val |= 0x10;
+ write_index(0x34, reg_val);
+
+ reg_val = read_index(0x31);
+ if (new_bits & 1)
+ reg_val |= 0x1000000;
+ else
+ reg_val &= 0xFEFFFFFF;
+
+ reg_val |= 0x8000000;
+ write_index(0x31, reg_val);
+}
+
+static unsigned char do_get_bits(void)
+{
+ unsigned char bits;
+ int reg_val;
+
+ reg_val = read_index(0x34);
+ reg_val |= 0x10;
+ reg_val &= 0xFFFFFFDF;
+ write_index(0x34, reg_val);
+
+ reg_val = read_index(0x34);
+ bits = 0;
+ if (reg_val & 8)
+ bits |= 2;
+ else
+ bits &= 0xFD;
+
+ reg_val = read_index(0x31);
+ if (reg_val & 0x1000000)
+ bits |= 1;
+ else
+ bits &= 0xFE;
+
+ return bits;
+}
+
+static unsigned int read_index(unsigned char index)
+{
+ unsigned char *addr;
+ unsigned int value;
+ /* addr = pci_addr_lin + DATA_PCI_OFF + ((index & 0xFF) << 2); */
+ addr = pci_addr_lin + ((index & 0xFF) << 2);
+ value = readl(addr);
+ return value;
+}
+
+static void write_index(unsigned char index, unsigned int reg_val)
+{
+ unsigned char *addr;
+ addr = pci_addr_lin + ((index & 0xFF) << 2);
+ writel(reg_val, addr);
+}
+
+MODULE_AUTHOR("Froenchenko Leonid");
+MODULE_DESCRIPTION("IR remote driver for bt829 based TV cards");
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/staging/lirc/lirc_ene0100.c b/drivers/staging/lirc/lirc_ene0100.c
new file mode 100644
index 0000000..a152c52
--- /dev/null
+++ b/drivers/staging/lirc/lirc_ene0100.c
@@ -0,0 +1,646 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
+ *
+ * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include "lirc_ene0100.h"
+
+static int sample_period = 75;
+static int enable_idle = 1;
+static int enable_learning;
+
+static void ene_set_idle(struct ene_device *dev, int idle);
+static void ene_set_inputs(struct ene_device *dev, int enable);
+
+/* read a hardware register */
+static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
+{
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+ return inb(dev->hw_io + ENE_IO);
+}
+
+/* write a hardware register */
+static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
+{
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+ outb(value, dev->hw_io + ENE_IO);
+}
+
+/* change specific bits in hardware register */
+static void ene_hw_write_reg_mask(struct ene_device *dev,
+ u16 reg, u8 value, u8 mask)
+{
+ u8 regvalue;
+
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+
+ regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
+ regvalue |= (value & mask);
+ outb(regvalue, dev->hw_io + ENE_IO);
+}
+
+/* read irq status and ack it */
+static int ene_hw_irq_status(struct ene_device *dev, int *buffer_pointer)
+{
+ u8 irq_status;
+ u8 fw_flags1, fw_flags2;
+
+ fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
+
+ if (buffer_pointer)
+ *buffer_pointer = 4 * (fw_flags2 & ENE_FW2_BUF_HIGH);
+
+ if (dev->hw_revision < ENE_HW_C) {
+ irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
+
+ if (!(irq_status & ENEB_IRQ_STATUS_IR))
+ return 0;
+ ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
+ irq_status & ~ENEB_IRQ_STATUS_IR);
+
+ /* rev B support only recieving */
+ return ENE_IRQ_RX;
+ }
+
+ irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
+
+ if (!(irq_status & ENEC_IRQ_STATUS))
+ return 0;
+
+ /* original driver does that twice - a workaround ? */
+ ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+ ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+
+ /* clear unknown flag in F8F9 */
+ if (fw_flags2 & ENE_FW2_IRQ_CLR)
+ ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
+
+ /* check if this is a TX interrupt */
+ fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
+
+ if (fw_flags1 & ENE_FW1_TXIRQ) {
+ ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
+ return ENE_IRQ_TX;
+ } else
+ return ENE_IRQ_RX;
+}
+
+static int ene_hw_detect(struct ene_device *dev)
+{
+ u8 chip_major, chip_minor;
+ u8 hw_revision, old_ver;
+ u8 tmp;
+ u8 fw_capabilities;
+
+ tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
+ ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
+
+ chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
+ chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
+
+ ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
+ hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
+ old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
+
+ if (hw_revision == 0xFF) {
+
+ ene_printk(KERN_WARNING, "device seems to be disabled\n");
+ ene_printk(KERN_WARNING,
+ "send a mail to lirc-list@lists.sourceforge.net\n");
+ ene_printk(KERN_WARNING, "please attach output of acpidump\n");
+
+ return -ENODEV;
+ }
+
+ if (chip_major == 0x33) {
+ ene_printk(KERN_WARNING, "chips 0x33xx aren't supported yet\n");
+ return -ENODEV;
+ }
+
+ if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_C;
+ ene_printk(KERN_WARNING,
+ "KB3926C detected, driver support is not complete!\n");
+
+ } else if (old_ver == 0x24 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_B;
+ ene_printk(KERN_NOTICE, "KB3926B detected\n");
+ } else {
+ dev->hw_revision = ENE_HW_D;
+ ene_printk(KERN_WARNING,
+ "unknown ENE chip detected, assuming KB3926D\n");
+ ene_printk(KERN_WARNING, "driver support incomplete");
+
+ }
+
+ ene_printk(KERN_DEBUG, "chip is 0x%02x%02x - 0x%02x, 0x%02x\n",
+ chip_major, chip_minor, old_ver, hw_revision);
+
+
+ /* detect features hardware supports */
+
+ if (dev->hw_revision < ENE_HW_C)
+ return 0;
+
+ fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
+
+ dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
+ dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
+
+ dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
+ fw_capabilities & ENE_FW2_FAN_AS_NRML_IN;
+
+ ene_printk(KERN_NOTICE, "hardware features:\n");
+ ene_printk(KERN_NOTICE,
+ "learning and tx %s, gpio40_learn %s, fan_in %s\n",
+ dev->hw_learning_and_tx_capable ? "on" : "off",
+ dev->hw_gpio40_learning ? "on" : "off",
+ dev->hw_fan_as_normal_input ? "on" : "off");
+
+ if (!dev->hw_learning_and_tx_capable && enable_learning)
+ enable_learning = 0;
+
+ if (dev->hw_learning_and_tx_capable) {
+ ene_printk(KERN_WARNING,
+ "Device supports transmitting, but the driver doesn't\n");
+ ene_printk(KERN_WARNING,
+ "due to lack of hardware to test against.\n");
+ ene_printk(KERN_WARNING,
+ "Send a mail to: lirc-list@lists.sourceforge.net\n");
+ }
+ return 0;
+}
+
+/* hardware initialization */
+static int ene_hw_init(void *data)
+{
+ u8 reg_value;
+ struct ene_device *dev = (struct ene_device *)data;
+ dev->in_use = 1;
+
+ if (dev->hw_revision < ENE_HW_C) {
+ ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
+ ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
+ } else {
+ reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
+ reg_value |= ENEC_IRQ_UNK_EN;
+ reg_value &= ~ENEC_IRQ_STATUS;
+ reg_value |= (dev->irq & ENEC_IRQ_MASK);
+ ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
+ ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
+ }
+
+ ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
+ ene_set_inputs(dev, enable_learning);
+
+ /* set sampling period */
+ ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
+
+ /* ack any pending irqs - just in case */
+ ene_hw_irq_status(dev, NULL);
+
+ /* enter idle mode */
+ ene_set_idle(dev, 1);
+
+ /* enable firmware bits */
+ ene_hw_write_reg_mask(dev, ENE_FW1,
+ ENE_FW1_ENABLE | ENE_FW1_IRQ,
+ ENE_FW1_ENABLE | ENE_FW1_IRQ);
+ /* clear stats */
+ dev->sample = 0;
+ return 0;
+}
+
+/* this enables gpio40 signal, used if connected to wide band input*/
+static void ene_enable_gpio40(struct ene_device *dev, int enable)
+{
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, enable ?
+ 0 : ENE_CIR_CONF2_GPIO40DIS,
+ ENE_CIR_CONF2_GPIO40DIS);
+}
+
+/* this enables the classic sampler */
+static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
+{
+ ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_ADC_ON : 0);
+}
+
+/* this enables recieve via fan input */
+static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
+{
+ if (!enable)
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
+ else {
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
+ }
+ dev->fan_input_inuse = enable;
+}
+
+/* determine which input to use*/
+static void ene_set_inputs(struct ene_device *dev, int learning_enable)
+{
+ ene_enable_normal_recieve(dev, 1);
+
+ /* old hardware doesn't support learning mode for sure */
+ if (dev->hw_revision <= ENE_HW_B)
+ return;
+
+ /* reciever not learning capable, still set gpio40 correctly */
+ if (!dev->hw_learning_and_tx_capable) {
+ ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
+ return;
+ }
+
+ /* enable learning mode */
+ if (learning_enable) {
+ ene_enable_gpio40(dev, dev->hw_gpio40_learning);
+
+ /* fan input is not used for learning */
+ if (dev->hw_fan_as_normal_input)
+ ene_enable_fan_recieve(dev, 0);
+
+ /* disable learning mode */
+ } else {
+ if (dev->hw_fan_as_normal_input) {
+ ene_enable_fan_recieve(dev, 1);
+ ene_enable_normal_recieve(dev, 0);
+ } else
+ ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
+ }
+
+ /* set few additional settings for this mode */
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_enable ?
+ ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
+
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_enable ?
+ ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
+}
+
+/* deinitialization */
+static void ene_hw_deinit(void *data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+
+ /* disable samplers */
+ ene_enable_normal_recieve(dev, 0);
+
+ if (dev->hw_fan_as_normal_input)
+ ene_enable_fan_recieve(dev, 0);
+
+ /* disable hardware IRQ and firmware flag */
+ ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+ ene_set_idle(dev, 1);
+ dev->in_use = 0;
+}
+
+/* sends current sample to userspace */
+static void send_sample(struct ene_device *dev)
+{
+ int value = abs(dev->sample) & PULSE_MASK;
+
+ if (dev->sample > 0)
+ value |= PULSE_BIT;
+
+ if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
+ lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&value);
+ wake_up(&dev->lirc_driver->rbuf->wait_poll);
+ }
+ dev->sample = 0;
+}
+
+/* this updates current sample */
+static void update_sample(struct ene_device *dev, int sample)
+{
+ if (!dev->sample)
+ dev->sample = sample;
+ else if (same_sign(dev->sample, sample))
+ dev->sample += sample;
+ else {
+ send_sample(dev);
+ dev->sample = sample;
+ }
+}
+
+/* enable or disable idle mode */
+static void ene_set_idle(struct ene_device *dev, int idle)
+{
+ struct timeval now;
+ int disable = idle && enable_idle && (dev->hw_revision < ENE_HW_C);
+
+ ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
+ disable ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
+ ENE_CIR_SAMPLE_OVERFLOW);
+ dev->idle = idle;
+
+ /* remember when we have entered the idle mode */
+ if (idle) {
+ do_gettimeofday(&dev->gap_start);
+ return;
+ }
+
+ /* send the gap between keypresses now */
+ do_gettimeofday(&now);
+
+ if (now.tv_sec - dev->gap_start.tv_sec > 16)
+ dev->sample = space(PULSE_MASK);
+ else
+ dev->sample = dev->sample +
+ space(1000000ull * (now.tv_sec - dev->gap_start.tv_sec))
+ + space(now.tv_usec - dev->gap_start.tv_usec);
+
+ if (abs(dev->sample) > PULSE_MASK)
+ dev->sample = space(PULSE_MASK);
+ send_sample(dev);
+}
+
+/* interrupt handler */
+static irqreturn_t ene_hw_irq(int irq, void *data)
+{
+ u16 hw_value;
+ int i, hw_sample;
+ int space;
+ int buffer_pointer;
+ int irq_status;
+
+ struct ene_device *dev = (struct ene_device *)data;
+ irq_status = ene_hw_irq_status(dev, &buffer_pointer);
+
+ if (!irq_status)
+ return IRQ_NONE;
+
+ /* TODO: only RX for now */
+ if (irq_status == ENE_IRQ_TX)
+ return IRQ_HANDLED;
+
+ for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
+
+ hw_value = ene_hw_read_reg(dev,
+ ENE_SAMPLE_BUFFER + buffer_pointer + i);
+
+ if (dev->fan_input_inuse) {
+ /* read high part of the sample */
+ hw_value |= ene_hw_read_reg(dev,
+ ENE_SAMPLE_BUFFER_FAN + buffer_pointer + i) << 8;
+
+ /* test for _space_ bit */
+ space = !(hw_value & ENE_FAN_SMPL_PULS_MSK);
+
+ /* clear space bit, and other unused bits */
+ hw_value &= ENE_FAN_VALUE_MASK;
+ hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
+
+ } else {
+ space = hw_value & ENE_SAMPLE_SPC_MASK;
+ hw_value &= ENE_SAMPLE_VALUE_MASK;
+ hw_sample = hw_value * sample_period;
+ }
+
+ /* no more data */
+ if (!(hw_value))
+ break;
+
+ if (space)
+ hw_sample *= -1;
+
+ /* overflow sample recieved, handle it */
+
+ if (!dev->fan_input_inuse && hw_value == ENE_SAMPLE_OVERFLOW) {
+
+ if (dev->idle)
+ continue;
+
+ if (dev->sample > 0 || abs(dev->sample) <= ENE_MAXGAP)
+ update_sample(dev, hw_sample);
+ else
+ ene_set_idle(dev, 1);
+
+ continue;
+ }
+
+ /* normal first sample recieved */
+ if (!dev->fan_input_inuse && dev->idle) {
+ ene_set_idle(dev, 0);
+
+ /* discard first recieved value, its random
+ since its the time signal was off before
+ first pulse if idle mode is enabled, HW
+ does that for us */
+
+ if (!enable_idle)
+ continue;
+ }
+ update_sample(dev, hw_sample);
+ send_sample(dev);
+ }
+ return IRQ_HANDLED;
+}
+
+static int ene_probe(struct pnp_dev *pnp_dev,
+ const struct pnp_device_id *dev_id)
+{
+ struct ene_device *dev;
+ struct lirc_driver *lirc_driver;
+ int error = -ENOMEM;
+
+ dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
+
+ if (!dev)
+ goto err1;
+
+ dev->pnp_dev = pnp_dev;
+ pnp_set_drvdata(pnp_dev, dev);
+
+
+ /* prepare lirc interface */
+ error = -ENOMEM;
+ lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+
+ if (!lirc_driver)
+ goto err2;
+
+ dev->lirc_driver = lirc_driver;
+
+ strcpy(lirc_driver->name, ENE_DRIVER_NAME);
+ lirc_driver->minor = -1;
+ lirc_driver->code_length = sizeof(int) * 8;
+ lirc_driver->features = LIRC_CAN_REC_MODE2;
+ lirc_driver->data = dev;
+ lirc_driver->set_use_inc = ene_hw_init;
+ lirc_driver->set_use_dec = ene_hw_deinit;
+ lirc_driver->dev = &pnp_dev->dev;
+ lirc_driver->owner = THIS_MODULE;
+
+ lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+
+ if (!lirc_driver->rbuf)
+ goto err3;
+
+ if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 256))
+ goto err4;
+
+ error = -ENODEV;
+ if (lirc_register_driver(lirc_driver))
+ goto err5;
+
+ /* validate resources */
+ if (!pnp_port_valid(pnp_dev, 0) ||
+ pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
+ goto err6;
+
+ if (!pnp_irq_valid(pnp_dev, 0))
+ goto err6;
+
+ dev->hw_io = pnp_port_start(pnp_dev, 0);
+ dev->irq = pnp_irq(pnp_dev, 0);
+
+ /* claim the resources */
+ error = -EBUSY;
+ if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
+ goto err6;
+
+ if (request_irq(dev->irq, ene_hw_irq,
+ IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
+ goto err7;
+
+ /* detect hardware version and features */
+ error = ene_hw_detect(dev);
+ if (error)
+ goto err8;
+
+ ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
+ return 0;
+
+err8:
+ free_irq(dev->irq, dev);
+err7:
+ release_region(dev->hw_io, ENE_MAX_IO);
+err6:
+ lirc_unregister_driver(lirc_driver->minor);
+err5:
+ lirc_buffer_free(lirc_driver->rbuf);
+err4:
+ kfree(lirc_driver->rbuf);
+err3:
+ kfree(lirc_driver);
+err2:
+ kfree(dev);
+err1:
+ return error;
+}
+
+static void ene_remove(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_hw_deinit(dev);
+ free_irq(dev->irq, dev);
+ release_region(dev->hw_io, ENE_MAX_IO);
+ lirc_unregister_driver(dev->lirc_driver->minor);
+ lirc_buffer_free(dev->lirc_driver->rbuf);
+ kfree(dev->lirc_driver);
+ kfree(dev);
+}
+
+#ifdef CONFIG_PM
+
+/* TODO: make 'wake on IR' configurable and add .shutdown */
+/* currently impossible due to lack of kernel support */
+
+static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_hw_write_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, ENE_FW1_WAKE);
+ return 0;
+}
+
+static int ene_resume(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ if (dev->in_use)
+ ene_hw_init(dev);
+
+ ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_WAKE);
+ return 0;
+}
+
+#endif
+
+static const struct pnp_device_id ene_ids[] = {
+ {.id = "ENE0100",},
+ {},
+};
+
+static struct pnp_driver ene_driver = {
+ .name = ENE_DRIVER_NAME,
+ .id_table = ene_ids,
+ .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+
+ .probe = ene_probe,
+ .remove = __devexit_p(ene_remove),
+
+#ifdef CONFIG_PM
+ .suspend = ene_suspend,
+ .resume = ene_resume,
+#endif
+};
+
+static int __init ene_init(void)
+{
+ if (sample_period < 5) {
+ ene_printk(KERN_ERR, "sample period must be at\n");
+ ene_printk(KERN_ERR, "least 5 us, (at least 30 recommended)\n");
+ return -EINVAL;
+ }
+ return pnp_register_driver(&ene_driver);
+}
+
+static void ene_exit(void)
+{
+ pnp_unregister_driver(&ene_driver);
+}
+
+module_param(sample_period, int, S_IRUGO);
+MODULE_PARM_DESC(sample_period, "Hardware sample period (75 us default)");
+
+module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_idle,
+ "Enables turning off signal sampling after long inactivity time; "
+ "if disabled might help detecting input signal (default: enabled)");
+
+module_param(enable_learning, bool, S_IRUGO);
+MODULE_PARM_DESC(enable_learning, "Use wide band (learning) reciever");
+
+MODULE_DEVICE_TABLE(pnp, ene_ids);
+MODULE_DESCRIPTION
+ ("LIRC driver for KB3926B/KB3926C/KB3926D (aka ENE0100) CIR port");
+MODULE_AUTHOR("Maxim Levitsky");
+MODULE_LICENSE("GPL");
+
+module_init(ene_init);
+module_exit(ene_exit);
diff --git a/drivers/staging/lirc/lirc_ene0100.h b/drivers/staging/lirc/lirc_ene0100.h
new file mode 100644
index 0000000..776b693
--- /dev/null
+++ b/drivers/staging/lirc/lirc_ene0100.h
@@ -0,0 +1,169 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
+ *
+ * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+/* hardware address */
+#define ENE_STATUS 0 /* hardware status - unused */
+#define ENE_ADDR_HI 1 /* hi byte of register address */
+#define ENE_ADDR_LO 2 /* low byte of register address */
+#define ENE_IO 3 /* read/write window */
+#define ENE_MAX_IO 4
+
+/* 8 bytes of samples, divided in 2 halfs*/
+#define ENE_SAMPLE_BUFFER 0xF8F0 /* regular sample buffer */
+#define ENE_SAMPLE_SPC_MASK (1 << 7) /* sample is space */
+#define ENE_SAMPLE_VALUE_MASK 0x7F
+#define ENE_SAMPLE_OVERFLOW 0x7F
+#define ENE_SAMPLES_SIZE 4
+
+/* fan input sample buffer */
+#define ENE_SAMPLE_BUFFER_FAN 0xF8FB /* this buffer holds high byte of */
+ /* each sample of normal buffer */
+
+#define ENE_FAN_SMPL_PULS_MSK 0x8000 /* this bit of combined sample */
+ /* if set, says that sample is pulse */
+#define ENE_FAN_VALUE_MASK 0x0FFF /* mask for valid bits of the value */
+
+/* first firmware register */
+#define ENE_FW1 0xF8F8
+#define ENE_FW1_ENABLE (1 << 0) /* enable fw processing */
+#define ENE_FW1_TXIRQ (1 << 1) /* TX interrupt pending */
+#define ENE_FW1_WAKE (1 << 6) /* enable wake from S3 */
+#define ENE_FW1_IRQ (1 << 7) /* enable interrupt */
+
+/* second firmware register */
+#define ENE_FW2 0xF8F9
+#define ENE_FW2_BUF_HIGH (1 << 0) /* which half of the buffer to read */
+#define ENE_FW2_IRQ_CLR (1 << 2) /* clear this on IRQ */
+#define ENE_FW2_GP40_AS_LEARN (1 << 4) /* normal input is used as */
+ /* learning input */
+#define ENE_FW2_FAN_AS_NRML_IN (1 << 6) /* fan is used as normal input */
+#define ENE_FW2_LEARNING (1 << 7) /* hardware supports learning and TX */
+
+/* fan as input settings - only if learning capable */
+#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN 0xCD
+#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN 0x03
+#define ENE_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ 0xFD09 /* IRQ number */
+#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */
+#define ENEB_IRQ_STATUS 0xFD80 /* irq status */
+#define ENEB_IRQ_STATUS_IR (1 << 5) /* IR irq */
+
+/* IRQ registers block (for revision C,D) */
+#define ENEC_IRQ 0xFE9B /* new irq settings register */
+#define ENEC_IRQ_MASK 0x0F /* irq number mask */
+#define ENEC_IRQ_UNK_EN (1 << 4) /* always enabled */
+#define ENEC_IRQ_STATUS (1 << 5) /* irq status and ACK */
+
+/* CIR block settings */
+#define ENE_CIR_CONF1 0xFEC0
+#define ENE_CIR_CONF1_ADC_ON 0x7 /* reciever on gpio40 enabled */
+#define ENE_CIR_CONF1_LEARN1 (1 << 3) /* enabled on learning mode */
+#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */
+#define ENE_CIR_CONF1_TX_CARR (1 << 7) /* send TX carrier or not */
+
+#define ENE_CIR_CONF2 0xFEC1 /* unknown setting = 0 */
+#define ENE_CIR_CONF2_LEARN2 (1 << 4) /* set on enable learning */
+#define ENE_CIR_CONF2_GPIO40DIS (1 << 5) /* disable normal input via gpio40 */
+
+#define ENE_CIR_SAMPLE_PERIOD 0xFEC8 /* sample period in us */
+#define ENE_CIR_SAMPLE_OVERFLOW (1 << 7) /* interrupt on overflows if set */
+
+
+/* transmitter - not implemented yet */
+/* KB3926C and higher */
+/* transmission is very similiar to recieving, a byte is written to */
+/* ENE_TX_INPUT, in same manner as it is read from sample buffer */
+/* sample period is fixed*/
+
+
+/* transmitter ports */
+#define ENE_TX_PORT1 0xFC01 /* this enables one or both */
+#define ENE_TX_PORT1_EN (1 << 5) /* TX ports */
+#define ENE_TX_PORT2 0xFC08
+#define ENE_TX_PORT2_EN (1 << 1)
+
+#define ENE_TX_INPUT 0xFEC9 /* next byte to transmit */
+#define ENE_TX_SPC_MASK (1 << 7) /* Transmitted sample is space */
+#define ENE_TX_UNK1 0xFECB /* set to 0x63 */
+#define ENE_TX_SMPL_PERIOD 50 /* transmit sample period */
+
+
+#define ENE_TX_CARRIER 0xFECE /* TX carrier * 2 (khz) */
+#define ENE_TX_CARRIER_UNKBIT 0x80 /* This bit set on transmit */
+#define ENE_TX_CARRIER_LOW 0xFECF /* TX carrier / 2 */
+
+/* Hardware versions */
+#define ENE_HW_VERSION 0xFF00 /* hardware revision */
+#define ENE_HW_UNK 0xFF1D
+#define ENE_HW_UNK_CLR (1 << 2)
+#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */
+#define ENE_HW_VER_MINOR 0xFF1F
+#define ENE_HW_VER_OLD 0xFD00
+
+#define same_sign(a, b) ((((a) > 0) && (b) > 0) || ((a) < 0 && (b) < 0))
+
+#define ENE_DRIVER_NAME "enecir"
+#define ENE_MAXGAP 250000 /* this is amount of time we wait
+ before turning the sampler, chosen
+ arbitry */
+
+#define space(len) (-(len)) /* add a space */
+
+/* software defines */
+#define ENE_IRQ_RX 1
+#define ENE_IRQ_TX 2
+
+#define ENE_HW_B 1 /* 3926B */
+#define ENE_HW_C 2 /* 3926C */
+#define ENE_HW_D 3 /* 3926D */
+
+#define ene_printk(level, text, ...) \
+ printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
+
+struct ene_device {
+ struct pnp_dev *pnp_dev;
+ struct lirc_driver *lirc_driver;
+
+ /* hw settings */
+ unsigned long hw_io;
+ int irq;
+
+ int hw_revision; /* hardware revision */
+ int hw_learning_and_tx_capable; /* learning capable */
+ int hw_gpio40_learning; /* gpio40 is learning */
+ int hw_fan_as_normal_input; /* fan input is used as regular input */
+
+ /* device data */
+ int idle;
+ int fan_input_inuse;
+
+ int sample;
+ int in_use;
+
+ struct timeval gap_start;
+};
diff --git a/drivers/staging/lirc/lirc_i2c.c b/drivers/staging/lirc/lirc_i2c.c
new file mode 100644
index 0000000..6df2c0e
--- /dev/null
+++ b/drivers/staging/lirc/lirc_i2c.c
@@ -0,0 +1,536 @@
+/*
+ * lirc_i2c.c
+ *
+ * i2c IR driver for the onboard IR port on many TV tuner cards, including:
+ * -Flavors of the Hauppauge PVR-150/250/350
+ * -Hauppauge HVR-1300
+ * -PixelView (BT878P+W/FM)
+ * -KNC ONE TV Station/Anubis Typhoon TView Tuner
+ * -Asus TV-Box and Creative/VisionTek BreakOut-Box
+ * -Leadtek Winfast PVR2000
+ *
+ * Copyright (c) 2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
+ * modified for PixelView (BT878P+W/FM) by
+ * Michal Kochanowicz <mkochano@pld.org.pl>
+ * Christoph Bartelmus <lirc@bartelmus.de>
+ * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by
+ * Ulrich Mueller <ulrich.mueller42@web.de>
+ * modified for Asus TV-Box and Creative/VisionTek BreakOut-Box by
+ * Stefan Jahn <stefan@lkcc.org>
+ * modified for inclusion into kernel sources by
+ * Jerome Brock <jbrock@users.sourceforge.net>
+ * modified for Leadtek Winfast PVR2000 by
+ * Thomas Reitmayr (treitmayr@yahoo.com)
+ * modified for Hauppauge HVR-1300 by
+ * Jan Frey (jfrey@gmx.de)
+ *
+ * parts are cut&pasted from the old lirc_haup.c driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <media/lirc_dev.h>
+
+struct IR {
+ struct lirc_driver l;
+ struct i2c_client c;
+ int nextkey;
+ unsigned char b[3];
+ unsigned char bits;
+ unsigned char flag;
+};
+
+#define DEVICE_NAME "lirc_i2c"
+
+/* module parameters */
+static int debug; /* debug output */
+static int minor = -1; /* minor number */
+
+#define dprintk(fmt, args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG DEVICE_NAME ": " fmt, \
+ ## args); \
+ } while (0)
+
+static int reverse(int data, int bits)
+{
+ int i;
+ int c;
+
+ for (c = 0, i = 0; i < bits; i++)
+ c |= ((data & (1<<i)) ? 1 : 0) << (bits-1-i);
+
+ return c;
+}
+
+static int add_to_buf_adap(void *data, struct lirc_buffer *buf)
+{
+ struct IR *ir = data;
+ unsigned char keybuf[4];
+
+ keybuf[0] = 0x00;
+ i2c_master_send(&ir->c, keybuf, 1);
+ /* poll IR chip */
+ if (i2c_master_recv(&ir->c, keybuf, sizeof(keybuf)) != sizeof(keybuf)) {
+ dprintk("read error\n");
+ return -EIO;
+ }
+
+ dprintk("key (0x%02x%02x%02x%02x)\n",
+ keybuf[0], keybuf[1], keybuf[2], keybuf[3]);
+
+ /* key pressed ? */
+ if (keybuf[2] == 0xff)
+ return -ENODATA;
+
+ /* remove repeat bit */
+ keybuf[2] &= 0x7f;
+ keybuf[3] |= 0x80;
+
+ lirc_buffer_write(buf, keybuf);
+ return 0;
+}
+
+static int add_to_buf_pcf8574(void *data, struct lirc_buffer *buf)
+{
+ struct IR *ir = data;
+ int rc;
+ unsigned char all, mask;
+ unsigned char key;
+
+ /* compute all valid bits (key code + pressed/release flag) */
+ all = ir->bits | ir->flag;
+
+ /* save IR writable mask bits */
+ mask = i2c_smbus_read_byte(&ir->c) & ~all;
+
+ /* send bit mask */
+ rc = i2c_smbus_write_byte(&ir->c, (0xff & all) | mask);
+
+ /* receive scan code */
+ rc = i2c_smbus_read_byte(&ir->c);
+
+ if (rc == -1) {
+ dprintk("%s read error\n", ir->c.name);
+ return -EIO;
+ }
+
+ /* drop duplicate polls */
+ if (ir->b[0] == (rc & all))
+ return -ENODATA;
+
+ ir->b[0] = rc & all;
+
+ dprintk("%s key 0x%02X %s\n", ir->c.name, rc & ir->bits,
+ (rc & ir->flag) ? "released" : "pressed");
+
+ /* ignore released buttons */
+ if (rc & ir->flag)
+ return -ENODATA;
+
+ /* set valid key code */
+ key = rc & ir->bits;
+ lirc_buffer_write(buf, &key);
+ return 0;
+}
+
+/* common for Hauppauge IR receivers */
+static int add_to_buf_haup_common(void *data, struct lirc_buffer *buf,
+ unsigned char *keybuf, int size, int offset)
+{
+ struct IR *ir = data;
+ __u16 code;
+ unsigned char codes[2];
+ int ret;
+
+ /* poll IR chip */
+ ret = i2c_master_recv(&ir->c, keybuf, size);
+ if (ret == size) {
+ ir->b[0] = keybuf[offset];
+ ir->b[1] = keybuf[offset+1];
+ ir->b[2] = keybuf[offset+2];
+ if (ir->b[0] != 0x00 && ir->b[1] != 0x00)
+ dprintk("key (0x%02x/0x%02x)\n", ir->b[0], ir->b[1]);
+ } else {
+ dprintk("read error (ret=%d)\n", ret);
+ /* keep last successful read buffer */
+ }
+
+ /* key pressed ? */
+ if ((ir->b[0] & 0x80) == 0)
+ return -ENODATA;
+
+ /* look what we have */
+ code = (((__u16)ir->b[0]&0x7f)<<6) | (ir->b[1]>>2);
+
+ codes[0] = (code >> 8) & 0xff;
+ codes[1] = code & 0xff;
+
+ /* return it */
+ dprintk("sending code 0x%02x%02x to lirc\n", codes[0], codes[1]);
+ lirc_buffer_write(buf, codes);
+ return 0;
+}
+
+/* specific for the Hauppauge PVR150 IR receiver */
+static int add_to_buf_haup_pvr150(void *data, struct lirc_buffer *buf)
+{
+ unsigned char keybuf[6];
+ /* fetch 6 bytes, first relevant is at offset 3 */
+ return add_to_buf_haup_common(data, buf, keybuf, 6, 3);
+}
+
+/* used for all Hauppauge IR receivers but the PVR150 */
+static int add_to_buf_haup(void *data, struct lirc_buffer *buf)
+{
+ unsigned char keybuf[3];
+ /* fetch 3 bytes, first relevant is at offset 0 */
+ return add_to_buf_haup_common(data, buf, keybuf, 3, 0);
+}
+
+
+static int add_to_buf_pvr2000(void *data, struct lirc_buffer *buf)
+{
+ struct IR *ir = data;
+ unsigned char key;
+ s32 flags;
+ s32 code;
+
+ /* poll IR chip */
+ flags = i2c_smbus_read_byte_data(&ir->c, 0x10);
+ if (-1 == flags) {
+ dprintk("read error\n");
+ return -ENODATA;
+ }
+ /* key pressed ? */
+ if (0 == (flags & 0x80))
+ return -ENODATA;
+
+ /* read actual key code */
+ code = i2c_smbus_read_byte_data(&ir->c, 0x00);
+ if (-1 == code) {
+ dprintk("read error\n");
+ return -ENODATA;
+ }
+
+ key = code & 0xFF;
+
+ dprintk("IR Key/Flags: (0x%02x/0x%02x)\n", key, flags & 0xFF);
+
+ /* return it */
+ lirc_buffer_write(buf, &key);
+ return 0;
+}
+
+static int add_to_buf_pixelview(void *data, struct lirc_buffer *buf)
+{
+ struct IR *ir = data;
+ unsigned char key;
+
+ /* poll IR chip */
+ if (1 != i2c_master_recv(&ir->c, &key, 1)) {
+ dprintk("read error\n");
+ return -1;
+ }
+ dprintk("key %02x\n", key);
+
+ /* return it */
+ lirc_buffer_write(buf, &key);
+ return 0;
+}
+
+static int add_to_buf_pv951(void *data, struct lirc_buffer *buf)
+{
+ struct IR *ir = data;
+ unsigned char key;
+ unsigned char codes[4];
+
+ /* poll IR chip */
+ if (1 != i2c_master_recv(&ir->c, &key, 1)) {
+ dprintk("read error\n");
+ return -ENODATA;
+ }
+ /* ignore 0xaa */
+ if (key == 0xaa)
+ return -ENODATA;
+ dprintk("key %02x\n", key);
+
+ codes[0] = 0x61;
+ codes[1] = 0xD6;
+ codes[2] = reverse(key, 8);
+ codes[3] = (~codes[2])&0xff;
+
+ lirc_buffer_write(buf, codes);
+ return 0;
+}
+
+static int add_to_buf_knc1(void *data, struct lirc_buffer *buf)
+{
+ static unsigned char last_key = 0xFF;
+ struct IR *ir = data;
+ unsigned char key;
+
+ /* poll IR chip */
+ if (1 != i2c_master_recv(&ir->c, &key, 1)) {
+ dprintk("read error\n");
+ return -ENODATA;
+ }
+
+ /*
+ * it seems that 0xFE indicates that a button is still held
+ * down, while 0xFF indicates that no button is held
+ * down. 0xFE sequences are sometimes interrupted by 0xFF
+ */
+
+ dprintk("key %02x\n", key);
+
+ if (key == 0xFF)
+ return -ENODATA;
+
+ if (key == 0xFE)
+ key = last_key;
+
+ last_key = key;
+ lirc_buffer_write(buf, &key);
+
+ return 0;
+}
+
+static int set_use_inc(void *data)
+{
+ struct IR *ir = data;
+
+ dprintk("%s called\n", __func__);
+
+ /* lock bttv in memory while /dev/lirc is in use */
+ i2c_use_client(&ir->c);
+
+ return 0;
+}
+
+static void set_use_dec(void *data)
+{
+ struct IR *ir = data;
+
+ dprintk("%s called\n", __func__);
+
+ i2c_release_client(&ir->c);
+}
+
+static struct lirc_driver lirc_template = {
+ .name = "lirc_i2c",
+ .set_use_inc = set_use_inc,
+ .set_use_dec = set_use_dec,
+ .dev = NULL,
+ .owner = THIS_MODULE,
+};
+
+static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id);
+static int ir_remove(struct i2c_client *client);
+static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg);
+
+static const struct i2c_device_id ir_receiver_id[] = {
+ /* Generic entry for any IR receiver */
+ { "ir_video", 0 },
+ /* IR device specific entries could be added here */
+ { }
+};
+
+static struct i2c_driver driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "i2c ir driver",
+ },
+ .probe = ir_probe,
+ .remove = ir_remove,
+ .id_table = ir_receiver_id,
+ .command = ir_command,
+};
+
+static void pcf_probe(struct i2c_client *client, struct IR *ir)
+{
+ int ret1, ret2, ret3, ret4;
+
+ ret1 = i2c_smbus_write_byte(client, 0xff);
+ ret2 = i2c_smbus_read_byte(client);
+ ret3 = i2c_smbus_write_byte(client, 0x00);
+ ret4 = i2c_smbus_read_byte(client);
+
+ /* in the Asus TV-Box: bit 1-0 */
+ if (((ret2 & 0x03) == 0x03) && ((ret4 & 0x03) == 0x00)) {
+ ir->bits = (unsigned char) ~0x07;
+ ir->flag = 0x04;
+ /* in the Creative/VisionTek BreakOut-Box: bit 7-6 */
+ } else if (((ret2 & 0xc0) == 0xc0) && ((ret4 & 0xc0) == 0x00)) {
+ ir->bits = (unsigned char) ~0xe0;
+ ir->flag = 0x20;
+ }
+
+ return;
+}
+
+static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct IR *ir;
+ struct i2c_adapter *adap = client->adapter;
+ unsigned short addr = client->addr;
+ int retval;
+
+ ir = kzalloc(sizeof(struct IR), GFP_KERNEL);
+ if (!ir)
+ return -ENOMEM;
+ memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver));
+ memcpy(&ir->c, client, sizeof(struct i2c_client));
+
+ i2c_set_clientdata(client, ir);
+ ir->l.data = ir;
+ ir->l.minor = minor;
+ ir->l.sample_rate = 10;
+ ir->l.dev = &ir->c.dev;
+ ir->nextkey = -1;
+
+ switch (addr) {
+ case 0x64:
+ strlcpy(ir->c.name, "Pixelview IR", I2C_NAME_SIZE);
+ ir->l.code_length = 8;
+ ir->l.add_to_buf = add_to_buf_pixelview;
+ break;
+ case 0x4b:
+ strlcpy(ir->c.name, "PV951 IR", I2C_NAME_SIZE);
+ ir->l.code_length = 32;
+ ir->l.add_to_buf = add_to_buf_pv951;
+ break;
+ case 0x71:
+ if (adap->id == I2C_HW_B_CX2388x)
+ strlcpy(ir->c.name, "Hauppauge HVR1300", I2C_NAME_SIZE);
+ else /* bt8xx or cx2341x */
+ /*
+ * The PVR150 IR receiver uses the same protocol as
+ * other Hauppauge cards, but the data flow is
+ * different, so we need to deal with it by its own.
+ */
+ strlcpy(ir->c.name, "Hauppauge PVR150", I2C_NAME_SIZE);
+ ir->l.code_length = 13;
+ ir->l.add_to_buf = add_to_buf_haup_pvr150;
+ break;
+ case 0x6b:
+ strlcpy(ir->c.name, "Adaptec IR", I2C_NAME_SIZE);
+ ir->l.code_length = 32;
+ ir->l.add_to_buf = add_to_buf_adap;
+ break;
+ case 0x18:
+ case 0x1a:
+ if (adap->id == I2C_HW_B_CX2388x) {
+ strlcpy(ir->c.name, "Leadtek IR", I2C_NAME_SIZE);
+ ir->l.code_length = 8;
+ ir->l.add_to_buf = add_to_buf_pvr2000;
+ } else { /* bt8xx or cx2341x */
+ strlcpy(ir->c.name, "Hauppauge IR", I2C_NAME_SIZE);
+ ir->l.code_length = 13;
+ ir->l.add_to_buf = add_to_buf_haup;
+ }
+ break;
+ case 0x30:
+ strlcpy(ir->c.name, "KNC ONE IR", I2C_NAME_SIZE);
+ ir->l.code_length = 8;
+ ir->l.add_to_buf = add_to_buf_knc1;
+ break;
+ case 0x21:
+ case 0x23:
+ pcf_probe(client, ir);
+ strlcpy(ir->c.name, "TV-Box IR", I2C_NAME_SIZE);
+ ir->l.code_length = 8;
+ ir->l.add_to_buf = add_to_buf_pcf8574;
+ break;
+ default:
+ /* shouldn't happen */
+ printk("lirc_i2c: Huh? unknown i2c address (0x%02x)?\n", addr);
+ kfree(ir);
+ return -EINVAL;
+ }
+ printk(KERN_INFO "lirc_i2c: chip 0x%x found @ 0x%02x (%s)\n",
+ adap->id, addr, ir->c.name);
+
+ retval = lirc_register_driver(&ir->l);
+
+ if (retval < 0) {
+ printk(KERN_ERR "lirc_i2c: failed to register driver!\n");
+ kfree(ir);
+ return retval;
+ }
+
+ ir->l.minor = retval;
+
+ return 0;
+}
+
+static int ir_remove(struct i2c_client *client)
+{
+ struct IR *ir = i2c_get_clientdata(client);
+
+ /* unregister device */
+ lirc_unregister_driver(ir->l.minor);
+
+ /* free memory */
+ kfree(ir);
+ return 0;
+}
+
+static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+ /* nothing */
+ return 0;
+}
+
+static int __init lirc_i2c_init(void)
+{
+ i2c_add_driver(&driver);
+ return 0;
+}
+
+static void __exit lirc_i2c_exit(void)
+{
+ i2c_del_driver(&driver);
+}
+
+MODULE_DESCRIPTION("Infrared receiver driver for Hauppauge and "
+ "Pixelview cards (i2c stack)");
+MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, "
+ "Ulrich Mueller, Stefan Jahn, Jerome Brock");
+MODULE_LICENSE("GPL");
+
+module_param(minor, int, S_IRUGO);
+MODULE_PARM_DESC(minor, "Preferred minor device number");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
+
+module_init(lirc_i2c_init);
+module_exit(lirc_i2c_exit);
diff --git a/drivers/staging/lirc/lirc_igorplugusb.c b/drivers/staging/lirc/lirc_igorplugusb.c
new file mode 100644
index 0000000..bce600e
--- /dev/null
+++ b/drivers/staging/lirc/lirc_igorplugusb.c
@@ -0,0 +1,555 @@
+/*
+ * lirc_igorplugusb - USB remote support for LIRC
+ *
+ * Supports the standard homebrew IgorPlugUSB receiver with Igor's firmware.
+ * See http://www.cesko.host.sk/IgorPlugUSB/IgorPlug-USB%20(AVR)_eng.htm
+ *
+ * The device can only record bursts of up to 36 pulses/spaces.
+ * Works fine with RC5. Longer commands lead to device buffer overrun.
+ * (Maybe a better firmware or a microcontroller with more ram can help?)
+ *
+ * Version 0.1 [beta status]
+ *
+ * Copyright (C) 2004 Jan M. Hochstein
+ * <hochstein@algo.informatik.tu-darmstadt.de>
+ *
+ * This driver was derived from:
+ * Paul Miller <pmiller9@users.sourceforge.net>
+ * "lirc_atiusb" module
+ * Vladimir Dergachev <volodya@minspring.com>'s 2002
+ * "USB ATI Remote support" (input device)
+ * Adrian Dewhurst <sailor-lk@sailorfrag.net>'s 2002
+ * "USB StreamZap remote driver" (LIRC)
+ * Artur Lipowski <alipowski@kki.net.pl>'s 2002
+ * "lirc_dev" and "lirc_gpio" LIRC modules
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/usb.h>
+#include <linux/time.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+
+/* module identification */
+#define DRIVER_VERSION "0.1"
+#define DRIVER_AUTHOR \
+ "Jan M. Hochstein <hochstein@algo.informatik.tu-darmstadt.de>"
+#define DRIVER_DESC "USB remote driver for LIRC"
+#define DRIVER_NAME "lirc_igorplugusb"
+
+/* debugging support */
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+#define dprintk(fmt, args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG fmt, ## args); \
+ } while (0)
+
+/* One mode2 pulse/space has 4 bytes. */
+#define CODE_LENGTH sizeof(int)
+
+/* Igor's firmware cannot record bursts longer than 36. */
+#define DEVICE_BUFLEN 36
+
+/*
+ * Header at the beginning of the device's buffer:
+ * unsigned char data_length
+ * unsigned char data_start (!=0 means ring-buffer overrun)
+ * unsigned char counter (incremented by each burst)
+ */
+#define DEVICE_HEADERLEN 3
+
+/* This is for the gap */
+#define ADDITIONAL_LIRC_BYTES 2
+
+/* times to poll per second */
+#define SAMPLE_RATE 100
+static int sample_rate = SAMPLE_RATE;
+
+
+/**** Igor's USB Request Codes */
+
+#define SET_INFRABUFFER_EMPTY 1
+/**
+ * Params: none
+ * Answer: empty
+ */
+
+#define GET_INFRACODE 2
+/**
+ * Params:
+ * wValue: offset to begin reading infra buffer
+ *
+ * Answer: infra data
+ */
+
+#define SET_DATAPORT_DIRECTION 3
+/**
+ * Params:
+ * wValue: (byte) 1 bit for each data port pin (0=in, 1=out)
+ *
+ * Answer: empty
+ */
+
+#define GET_DATAPORT_DIRECTION 4
+/**
+ * Params: none
+ *
+ * Answer: (byte) 1 bit for each data port pin (0=in, 1=out)
+ */
+
+#define SET_OUT_DATAPORT 5
+/**
+ * Params:
+ * wValue: byte to write to output data port
+ *
+ * Answer: empty
+ */
+
+#define GET_OUT_DATAPORT 6
+/**
+ * Params: none
+ *
+ * Answer: least significant 3 bits read from output data port
+ */
+
+#define GET_IN_DATAPORT 7
+/**
+ * Params: none
+ *
+ * Answer: least significant 3 bits read from input data port
+ */
+
+#define READ_EEPROM 8
+/**
+ * Params:
+ * wValue: offset to begin reading EEPROM
+ *
+ * Answer: EEPROM bytes
+ */
+
+#define WRITE_EEPROM 9
+/**
+ * Params:
+ * wValue: offset to EEPROM byte
+ * wIndex: byte to write
+ *
+ * Answer: empty
+ */
+
+#define SEND_RS232 10
+/**
+ * Params:
+ * wValue: byte to send
+ *
+ * Answer: empty
+ */
+
+#define RECV_RS232 11
+/**
+ * Params: none
+ *
+ * Answer: byte received
+ */
+
+#define SET_RS232_BAUD 12
+/**
+ * Params:
+ * wValue: byte to write to UART bit rate register (UBRR)
+ *
+ * Answer: empty
+ */
+
+#define GET_RS232_BAUD 13
+/**
+ * Params: none
+ *
+ * Answer: byte read from UART bit rate register (UBRR)
+ */
+
+
+/* data structure for each usb remote */
+struct igorplug {
+
+ /* usb */
+ struct usb_device *usbdev;
+ struct urb *urb_in;
+ int devnum;
+
+ unsigned char *buf_in;
+ unsigned int len_in;
+ int in_space;
+ struct timeval last_time;
+
+ dma_addr_t dma_in;
+
+ /* lirc */
+ struct lirc_driver *d;
+
+ /* handle sending (init strings) */
+ int send_flags;
+ wait_queue_head_t wait_out;
+};
+
+static int unregister_from_lirc(struct igorplug *ir)
+{
+ struct lirc_driver *d = ir->d;
+ int devnum;
+
+ if (!ir->d)
+ return -EINVAL;
+
+ devnum = ir->devnum;
+ dprintk(DRIVER_NAME "[%d]: unregister from lirc called\n", devnum);
+
+ lirc_unregister_driver(d->minor);
+
+ printk(DRIVER_NAME "[%d]: usb remote disconnected\n", devnum);
+
+ kfree(d);
+ ir->d = NULL;
+ kfree(ir);
+ return 0;
+}
+
+static int set_use_inc(void *data)
+{
+ struct igorplug *ir = data;
+
+ if (!ir) {
+ printk(DRIVER_NAME "[?]: set_use_inc called with no context\n");
+ return -EIO;
+ }
+ dprintk(DRIVER_NAME "[%d]: set use inc\n", ir->devnum);
+
+ if (!ir->usbdev)
+ return -ENODEV;
+
+ return 0;
+}
+
+static void set_use_dec(void *data)
+{
+ struct igorplug *ir = data;
+
+ if (!ir) {
+ printk(DRIVER_NAME "[?]: set_use_dec called with no context\n");
+ return;
+ }
+ dprintk(DRIVER_NAME "[%d]: set use dec\n", ir->devnum);
+}
+
+
+/**
+ * Called in user context.
+ * return 0 if data was added to the buffer and
+ * -ENODATA if none was available. This should add some number of bits
+ * evenly divisible by code_length to the buffer
+ */
+static int usb_remote_poll(void *data, struct lirc_buffer *buf)
+{
+ int ret;
+ struct igorplug *ir = (struct igorplug *)data;
+
+ if (!ir->usbdev) /* Has the device been removed? */
+ return -ENODEV;
+
+ memset(ir->buf_in, 0, ir->len_in);
+
+ ret = usb_control_msg(
+ ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+ GET_INFRACODE, USB_TYPE_VENDOR|USB_DIR_IN,
+ 0/* offset */, /*unused*/0,
+ ir->buf_in, ir->len_in,
+ /*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
+ if (ret > 0) {
+ int i = DEVICE_HEADERLEN;
+ int code, timediff;
+ struct timeval now;
+
+ if (ret <= 1) /* ACK packet has 1 byte --> ignore */
+ return -ENODATA;
+
+ dprintk(DRIVER_NAME ": Got %d bytes. Header: %02x %02x %02x\n",
+ ret, ir->buf_in[0], ir->buf_in[1], ir->buf_in[2]);
+
+ if (ir->buf_in[2] != 0) {
+ printk(DRIVER_NAME "[%d]: Device buffer overrun.\n",
+ ir->devnum);
+ /* start at earliest byte */
+ i = DEVICE_HEADERLEN + ir->buf_in[2];
+ /* where are we now? space, gap or pulse? */
+ }
+
+ do_gettimeofday(&now);
+ timediff = now.tv_sec - ir->last_time.tv_sec;
+ if (timediff + 1 > PULSE_MASK / 1000000)
+ timediff = PULSE_MASK;
+ else {
+ timediff *= 1000000;
+ timediff += now.tv_usec - ir->last_time.tv_usec;
+ }
+ ir->last_time.tv_sec = now.tv_sec;
+ ir->last_time.tv_usec = now.tv_usec;
+
+ /* create leading gap */
+ code = timediff;
+ lirc_buffer_write(buf, (unsigned char *)&code);
+ ir->in_space = 1; /* next comes a pulse */
+
+ /* MODE2: pulse/space (PULSE_BIT) in 1us units */
+
+ while (i < ret) {
+ /* 1 Igor-tick = 85.333333 us */
+ code = (unsigned int)ir->buf_in[i] * 85
+ + (unsigned int)ir->buf_in[i] / 3;
+ if (ir->in_space)
+ code |= PULSE_BIT;
+ lirc_buffer_write(buf, (unsigned char *)&code);
+ /* 1 chunk = CODE_LENGTH bytes */
+ ir->in_space ^= 1;
+ ++i;
+ }
+
+ ret = usb_control_msg(
+ ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+ SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN,
+ /*unused*/0, /*unused*/0,
+ /*dummy*/ir->buf_in, /*dummy*/ir->len_in,
+ /*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
+ if (ret < 0)
+ printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: "
+ "error %d\n", ir->devnum, ret);
+ return 0;
+ } else if (ret < 0)
+ printk(DRIVER_NAME "[%d]: GET_INFRACODE: error %d\n",
+ ir->devnum, ret);
+
+ return -ENODATA;
+}
+
+
+
+static int usb_remote_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = NULL;
+ struct usb_host_interface *idesc = NULL;
+ struct usb_host_endpoint *ep_ctl2;
+ struct igorplug *ir = NULL;
+ struct lirc_driver *driver = NULL;
+ int devnum, pipe, maxp;
+ int minor = 0;
+ char buf[63], name[128] = "";
+ int mem_failure = 0;
+ int ret;
+
+ dprintk(DRIVER_NAME ": usb probe called.\n");
+
+ dev = interface_to_usbdev(intf);
+
+ idesc = intf->cur_altsetting;
+
+ if (idesc->desc.bNumEndpoints != 1)
+ return -ENODEV;
+ ep_ctl2 = idesc->endpoint;
+ if (((ep_ctl2->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ != USB_DIR_IN)
+ || (ep_ctl2->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ != USB_ENDPOINT_XFER_CONTROL)
+ return -ENODEV;
+ pipe = usb_rcvctrlpipe(dev, ep_ctl2->desc.bEndpointAddress);
+ devnum = dev->devnum;
+ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+ dprintk(DRIVER_NAME "[%d]: bytes_in_key=%lu maxp=%d\n",
+ devnum, CODE_LENGTH, maxp);
+
+
+ mem_failure = 0;
+ ir = kzalloc(sizeof(struct igorplug), GFP_KERNEL);
+ if (!ir) {
+ mem_failure = 1;
+ goto mem_failure_switch;
+ }
+ driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+ if (!driver) {
+ mem_failure = 2;
+ goto mem_failure_switch;
+ }
+
+ ir->buf_in = usb_alloc_coherent(dev,
+ DEVICE_BUFLEN+DEVICE_HEADERLEN,
+ GFP_ATOMIC, &ir->dma_in);
+ if (!ir->buf_in) {
+ mem_failure = 3;
+ goto mem_failure_switch;
+ }
+
+ strcpy(driver->name, DRIVER_NAME " ");
+ driver->minor = -1;
+ driver->code_length = CODE_LENGTH * 8; /* in bits */
+ driver->features = LIRC_CAN_REC_MODE2;
+ driver->data = ir;
+ driver->chunk_size = CODE_LENGTH;
+ driver->buffer_size = DEVICE_BUFLEN + ADDITIONAL_LIRC_BYTES;
+ driver->set_use_inc = &set_use_inc;
+ driver->set_use_dec = &set_use_dec;
+ driver->sample_rate = sample_rate; /* per second */
+ driver->add_to_buf = &usb_remote_poll;
+ driver->dev = &intf->dev;
+ driver->owner = THIS_MODULE;
+
+ init_waitqueue_head(&ir->wait_out);
+
+ minor = lirc_register_driver(driver);
+ if (minor < 0)
+ mem_failure = 9;
+
+mem_failure_switch:
+
+ switch (mem_failure) {
+ case 9:
+ usb_free_coherent(dev, DEVICE_BUFLEN+DEVICE_HEADERLEN,
+ ir->buf_in, ir->dma_in);
+ case 3:
+ kfree(driver);
+ case 2:
+ kfree(ir);
+ case 1:
+ printk(DRIVER_NAME "[%d]: out of memory (code=%d)\n",
+ devnum, mem_failure);
+ return -ENOMEM;
+ }
+
+ driver->minor = minor;
+ ir->d = driver;
+ ir->devnum = devnum;
+ ir->usbdev = dev;
+ ir->len_in = DEVICE_BUFLEN+DEVICE_HEADERLEN;
+ ir->in_space = 1; /* First mode2 event is a space. */
+ do_gettimeofday(&ir->last_time);
+
+ if (dev->descriptor.iManufacturer
+ && usb_string(dev, dev->descriptor.iManufacturer,
+ buf, sizeof(buf)) > 0)
+ strlcpy(name, buf, sizeof(name));
+ if (dev->descriptor.iProduct
+ && usb_string(dev, dev->descriptor.iProduct, buf, sizeof(buf)) > 0)
+ snprintf(name + strlen(name), sizeof(name) - strlen(name),
+ " %s", buf);
+ printk(DRIVER_NAME "[%d]: %s on usb%d:%d\n", devnum, name,
+ dev->bus->busnum, devnum);
+
+ /* clear device buffer */
+ ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+ SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN,
+ /*unused*/0, /*unused*/0,
+ /*dummy*/ir->buf_in, /*dummy*/ir->len_in,
+ /*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
+ if (ret < 0)
+ printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: error %d\n",
+ devnum, ret);
+
+ usb_set_intfdata(intf, ir);
+ return 0;
+}
+
+
+static void usb_remote_disconnect(struct usb_interface *intf)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct igorplug *ir = usb_get_intfdata(intf);
+ usb_set_intfdata(intf, NULL);
+
+ if (!ir || !ir->d)
+ return;
+
+ ir->usbdev = NULL;
+ wake_up_all(&ir->wait_out);
+
+ usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
+
+ unregister_from_lirc(ir);
+}
+
+static struct usb_device_id usb_remote_id_table[] = {
+ /* Igor Plug USB (Atmel's Manufact. ID) */
+ { USB_DEVICE(0x03eb, 0x0002) },
+
+ /* Terminating entry */
+ { }
+};
+
+static struct usb_driver usb_remote_driver = {
+ .name = DRIVER_NAME,
+ .probe = usb_remote_probe,
+ .disconnect = usb_remote_disconnect,
+ .id_table = usb_remote_id_table
+};
+
+static int __init usb_remote_init(void)
+{
+ int i;
+
+ printk(KERN_INFO "\n"
+ DRIVER_NAME ": " DRIVER_DESC " v" DRIVER_VERSION "\n");
+ printk(DRIVER_NAME ": " DRIVER_AUTHOR "\n");
+ dprintk(DRIVER_NAME ": debug mode enabled\n");
+
+ i = usb_register(&usb_remote_driver);
+ if (i < 0) {
+ printk(DRIVER_NAME ": usb register failed, result = %d\n", i);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __exit usb_remote_exit(void)
+{
+ usb_deregister(&usb_remote_driver);
+}
+
+module_init(usb_remote_init);
+module_exit(usb_remote_exit);
+
+#include <linux/vermagic.h>
+MODULE_INFO(vermagic, VERMAGIC_STRING);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, usb_remote_id_table);
+
+module_param(sample_rate, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(sample_rate, "Sampling rate in Hz (default: 100)");
+
diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c
new file mode 100644
index 0000000..6649325
--- /dev/null
+++ b/drivers/staging/lirc/lirc_imon.c
@@ -0,0 +1,1058 @@
+/*
+ * lirc_imon.c: LIRC/VFD/LCD driver for SoundGraph iMON IR/VFD/LCD
+ * including the iMON PAD model
+ *
+ * Copyright(C) 2004 Venky Raju(dev@venky.ws)
+ * Copyright(C) 2009 Jarod Wilson <jarod@wilsonet.com>
+ *
+ * lirc_imon is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+
+#define MOD_AUTHOR "Venky Raju <dev@venky.ws>"
+#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display"
+#define MOD_NAME "lirc_imon"
+#define MOD_VERSION "0.8"
+
+#define DISPLAY_MINOR_BASE 144
+#define DEVICE_NAME "lcd%d"
+
+#define BUF_CHUNK_SIZE 4
+#define BUF_SIZE 128
+
+#define BIT_DURATION 250 /* each bit received is 250us */
+
+/*** P R O T O T Y P E S ***/
+
+/* USB Callback prototypes */
+static int imon_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+static void imon_disconnect(struct usb_interface *interface);
+static void usb_rx_callback(struct urb *urb);
+static void usb_tx_callback(struct urb *urb);
+
+/* suspend/resume support */
+static int imon_resume(struct usb_interface *intf);
+static int imon_suspend(struct usb_interface *intf, pm_message_t message);
+
+/* Display file_operations function prototypes */
+static int display_open(struct inode *inode, struct file *file);
+static int display_close(struct inode *inode, struct file *file);
+
+/* VFD write operation */
+static ssize_t vfd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos);
+
+/* LIRC driver function prototypes */
+static int ir_open(void *data);
+static void ir_close(void *data);
+
+/* Driver init/exit prototypes */
+static int __init imon_init(void);
+static void __exit imon_exit(void);
+
+/*** G L O B A L S ***/
+#define IMON_DATA_BUF_SZ 35
+
+struct imon_context {
+ struct usb_device *usbdev;
+ /* Newer devices have two interfaces */
+ int display; /* not all controllers do */
+ int display_isopen; /* display port has been opened */
+ int ir_isopen; /* IR port open */
+ int dev_present; /* USB device presence */
+ struct mutex ctx_lock; /* to lock this object */
+ wait_queue_head_t remove_ok; /* For unexpected USB disconnects */
+
+ int vfd_proto_6p; /* some VFD require a 6th packet */
+
+ struct lirc_driver *driver;
+ struct usb_endpoint_descriptor *rx_endpoint;
+ struct usb_endpoint_descriptor *tx_endpoint;
+ struct urb *rx_urb;
+ struct urb *tx_urb;
+ unsigned char usb_rx_buf[8];
+ unsigned char usb_tx_buf[8];
+
+ struct rx_data {
+ int count; /* length of 0 or 1 sequence */
+ int prev_bit; /* logic level of sequence */
+ int initial_space; /* initial space flag */
+ } rx;
+
+ struct tx_t {
+ unsigned char data_buf[IMON_DATA_BUF_SZ]; /* user data buffer */
+ struct completion finished; /* wait for write to finish */
+ atomic_t busy; /* write in progress */
+ int status; /* status of tx completion */
+ } tx;
+};
+
+static const struct file_operations display_fops = {
+ .owner = THIS_MODULE,
+ .open = &display_open,
+ .write = &vfd_write,
+ .release = &display_close
+};
+
+/*
+ * USB Device ID for iMON USB Control Boards
+ *
+ * The Windows drivers contain 6 different inf files, more or less one for
+ * each new device until the 0x0034-0x0046 devices, which all use the same
+ * driver. Some of the devices in the 34-46 range haven't been definitively
+ * identified yet. Early devices have either a TriGem Computer, Inc. or a
+ * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later
+ * devices use the SoundGraph vendor ID (0x15c2).
+ */
+static struct usb_device_id imon_usb_id_table[] = {
+ /* TriGem iMON (IR only) -- TG_iMON.inf */
+ { USB_DEVICE(0x0aa8, 0x8001) },
+
+ /* SoundGraph iMON (IR only) -- sg_imon.inf */
+ { USB_DEVICE(0x04e8, 0xff30) },
+
+ /* SoundGraph iMON VFD (IR & VFD) -- iMON_VFD.inf */
+ { USB_DEVICE(0x0aa8, 0xffda) },
+
+ /* SoundGraph iMON SS (IR & VFD) -- iMON_SS.inf */
+ { USB_DEVICE(0x15c2, 0xffda) },
+
+ {}
+};
+
+/* Some iMON VFD models requires a 6th packet for VFD writes */
+static struct usb_device_id vfd_proto_6p_list[] = {
+ { USB_DEVICE(0x15c2, 0xffda) },
+ {}
+};
+
+/* Some iMON devices have no lcd/vfd, don't set one up */
+static struct usb_device_id ir_only_list[] = {
+ { USB_DEVICE(0x0aa8, 0x8001) },
+ { USB_DEVICE(0x04e8, 0xff30) },
+ {}
+};
+
+/* USB Device data */
+static struct usb_driver imon_driver = {
+ .name = MOD_NAME,
+ .probe = imon_probe,
+ .disconnect = imon_disconnect,
+ .suspend = imon_suspend,
+ .resume = imon_resume,
+ .id_table = imon_usb_id_table,
+};
+
+static struct usb_class_driver imon_class = {
+ .name = DEVICE_NAME,
+ .fops = &display_fops,
+ .minor_base = DISPLAY_MINOR_BASE,
+};
+
+/* to prevent races between open() and disconnect(), probing, etc */
+static DEFINE_MUTEX(driver_lock);
+
+static int debug;
+
+/*** M O D U L E C O D E ***/
+
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_VERSION(MOD_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, imon_usb_id_table);
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes(default: no)");
+
+static void free_imon_context(struct imon_context *context)
+{
+ struct device *dev = context->driver->dev;
+ usb_free_urb(context->tx_urb);
+ usb_free_urb(context->rx_urb);
+ lirc_buffer_free(context->driver->rbuf);
+ kfree(context->driver->rbuf);
+ kfree(context->driver);
+ kfree(context);
+
+ dev_dbg(dev, "%s: iMON context freed\n", __func__);
+}
+
+static void deregister_from_lirc(struct imon_context *context)
+{
+ int retval;
+ int minor = context->driver->minor;
+
+ retval = lirc_unregister_driver(minor);
+ if (retval)
+ err("%s: unable to deregister from lirc(%d)",
+ __func__, retval);
+ else
+ printk(KERN_INFO MOD_NAME ": Deregistered iMON driver "
+ "(minor:%d)\n", minor);
+
+}
+
+/**
+ * Called when the Display device (e.g. /dev/lcd0)
+ * is opened by the application.
+ */
+static int display_open(struct inode *inode, struct file *file)
+{
+ struct usb_interface *interface;
+ struct imon_context *context = NULL;
+ int subminor;
+ int retval = 0;
+
+ /* prevent races with disconnect */
+ mutex_lock(&driver_lock);
+
+ subminor = iminor(inode);
+ interface = usb_find_interface(&imon_driver, subminor);
+ if (!interface) {
+ err("%s: could not find interface for minor %d",
+ __func__, subminor);
+ retval = -ENODEV;
+ goto exit;
+ }
+ context = usb_get_intfdata(interface);
+
+ if (!context) {
+ err("%s: no context found for minor %d",
+ __func__, subminor);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ mutex_lock(&context->ctx_lock);
+
+ if (!context->display) {
+ err("%s: display not supported by device", __func__);
+ retval = -ENODEV;
+ } else if (context->display_isopen) {
+ err("%s: display port is already open", __func__);
+ retval = -EBUSY;
+ } else {
+ context->display_isopen = 1;
+ file->private_data = context;
+ dev_info(context->driver->dev, "display port opened\n");
+ }
+
+ mutex_unlock(&context->ctx_lock);
+
+exit:
+ mutex_unlock(&driver_lock);
+ return retval;
+}
+
+/**
+ * Called when the display device (e.g. /dev/lcd0)
+ * is closed by the application.
+ */
+static int display_close(struct inode *inode, struct file *file)
+{
+ struct imon_context *context = NULL;
+ int retval = 0;
+
+ context = (struct imon_context *)file->private_data;
+
+ if (!context) {
+ err("%s: no context for device", __func__);
+ return -ENODEV;
+ }
+
+ mutex_lock(&context->ctx_lock);
+
+ if (!context->display) {
+ err("%s: display not supported by device", __func__);
+ retval = -ENODEV;
+ } else if (!context->display_isopen) {
+ err("%s: display is not open", __func__);
+ retval = -EIO;
+ } else {
+ context->display_isopen = 0;
+ dev_info(context->driver->dev, "display port closed\n");
+ if (!context->dev_present && !context->ir_isopen) {
+ /*
+ * Device disconnected before close and IR port is not
+ * open. If IR port is open, context will be deleted by
+ * ir_close.
+ */
+ mutex_unlock(&context->ctx_lock);
+ free_imon_context(context);
+ return retval;
+ }
+ }
+
+ mutex_unlock(&context->ctx_lock);
+ return retval;
+}
+
+/**
+ * Sends a packet to the device -- this function must be called
+ * with context->ctx_lock held.
+ */
+static int send_packet(struct imon_context *context)
+{
+ unsigned int pipe;
+ int interval = 0;
+ int retval = 0;
+ struct usb_ctrlrequest *control_req = NULL;
+
+ /* Check if we need to use control or interrupt urb */
+ pipe = usb_sndintpipe(context->usbdev,
+ context->tx_endpoint->bEndpointAddress);
+ interval = context->tx_endpoint->bInterval;
+
+ usb_fill_int_urb(context->tx_urb, context->usbdev, pipe,
+ context->usb_tx_buf,
+ sizeof(context->usb_tx_buf),
+ usb_tx_callback, context, interval);
+
+ context->tx_urb->actual_length = 0;
+
+ init_completion(&context->tx.finished);
+ atomic_set(&(context->tx.busy), 1);
+
+ retval = usb_submit_urb(context->tx_urb, GFP_KERNEL);
+ if (retval) {
+ atomic_set(&(context->tx.busy), 0);
+ err("%s: error submitting urb(%d)", __func__, retval);
+ } else {
+ /* Wait for transmission to complete (or abort) */
+ mutex_unlock(&context->ctx_lock);
+ retval = wait_for_completion_interruptible(
+ &context->tx.finished);
+ if (retval)
+ err("%s: task interrupted", __func__);
+ mutex_lock(&context->ctx_lock);
+
+ retval = context->tx.status;
+ if (retval)
+ err("%s: packet tx failed (%d)", __func__, retval);
+ }
+
+ kfree(control_req);
+
+ return retval;
+}
+
+/**
+ * Writes data to the VFD. The iMON VFD is 2x16 characters
+ * and requires data in 5 consecutive USB interrupt packets,
+ * each packet but the last carrying 7 bytes.
+ *
+ * I don't know if the VFD board supports features such as
+ * scrolling, clearing rows, blanking, etc. so at
+ * the caller must provide a full screen of data. If fewer
+ * than 32 bytes are provided spaces will be appended to
+ * generate a full screen.
+ */
+static ssize_t vfd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos)
+{
+ int i;
+ int offset;
+ int seq;
+ int retval = 0;
+ struct imon_context *context;
+ const unsigned char vfd_packet6[] = {
+ 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
+ int *data_buf;
+
+ context = (struct imon_context *)file->private_data;
+ if (!context) {
+ err("%s: no context for device", __func__);
+ return -ENODEV;
+ }
+
+ mutex_lock(&context->ctx_lock);
+
+ if (!context->dev_present) {
+ err("%s: no iMON device present", __func__);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ if (n_bytes <= 0 || n_bytes > IMON_DATA_BUF_SZ - 3) {
+ err("%s: invalid payload size", __func__);
+ retval = -EINVAL;
+ goto exit;
+ }
+
+ data_buf = memdup_user(buf, n_bytes);
+ if (IS_ERR(data_buf)) {
+ retval = PTR_ERR(data_buf);
+ goto exit;
+ }
+
+ memcpy(context->tx.data_buf, data_buf, n_bytes);
+
+ /* Pad with spaces */
+ for (i = n_bytes; i < IMON_DATA_BUF_SZ - 3; ++i)
+ context->tx.data_buf[i] = ' ';
+
+ for (i = IMON_DATA_BUF_SZ - 3; i < IMON_DATA_BUF_SZ; ++i)
+ context->tx.data_buf[i] = 0xFF;
+
+ offset = 0;
+ seq = 0;
+
+ do {
+ memcpy(context->usb_tx_buf, context->tx.data_buf + offset, 7);
+ context->usb_tx_buf[7] = (unsigned char) seq;
+
+ retval = send_packet(context);
+ if (retval) {
+ err("%s: send packet failed for packet #%d",
+ __func__, seq/2);
+ goto exit;
+ } else {
+ seq += 2;
+ offset += 7;
+ }
+
+ } while (offset < IMON_DATA_BUF_SZ);
+
+ if (context->vfd_proto_6p) {
+ /* Send packet #6 */
+ memcpy(context->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6));
+ context->usb_tx_buf[7] = (unsigned char) seq;
+ retval = send_packet(context);
+ if (retval)
+ err("%s: send packet failed for packet #%d",
+ __func__, seq/2);
+ }
+
+exit:
+ mutex_unlock(&context->ctx_lock);
+
+ return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Callback function for USB core API: transmit data
+ */
+static void usb_tx_callback(struct urb *urb)
+{
+ struct imon_context *context;
+
+ if (!urb)
+ return;
+ context = (struct imon_context *)urb->context;
+ if (!context)
+ return;
+
+ context->tx.status = urb->status;
+
+ /* notify waiters that write has finished */
+ atomic_set(&context->tx.busy, 0);
+ complete(&context->tx.finished);
+
+ return;
+}
+
+/**
+ * Called by lirc_dev when the application opens /dev/lirc
+ */
+static int ir_open(void *data)
+{
+ int retval = 0;
+ struct imon_context *context;
+
+ /* prevent races with disconnect */
+ mutex_lock(&driver_lock);
+
+ context = (struct imon_context *)data;
+
+ /* initial IR protocol decode variables */
+ context->rx.count = 0;
+ context->rx.initial_space = 1;
+ context->rx.prev_bit = 0;
+
+ context->ir_isopen = 1;
+ dev_info(context->driver->dev, "IR port opened\n");
+
+ mutex_unlock(&driver_lock);
+ return retval;
+}
+
+/**
+ * Called by lirc_dev when the application closes /dev/lirc
+ */
+static void ir_close(void *data)
+{
+ struct imon_context *context;
+
+ context = (struct imon_context *)data;
+ if (!context) {
+ err("%s: no context for device", __func__);
+ return;
+ }
+
+ mutex_lock(&context->ctx_lock);
+
+ context->ir_isopen = 0;
+ dev_info(context->driver->dev, "IR port closed\n");
+
+ if (!context->dev_present) {
+ /*
+ * Device disconnected while IR port was still open. Driver
+ * was not deregistered at disconnect time, so do it now.
+ */
+ deregister_from_lirc(context);
+
+ if (!context->display_isopen) {
+ mutex_unlock(&context->ctx_lock);
+ free_imon_context(context);
+ return;
+ }
+ /*
+ * If display port is open, context will be deleted by
+ * display_close
+ */
+ }
+
+ mutex_unlock(&context->ctx_lock);
+ return;
+}
+
+/**
+ * Convert bit count to time duration (in us) and submit
+ * the value to lirc_dev.
+ */
+static void submit_data(struct imon_context *context)
+{
+ unsigned char buf[4];
+ int value = context->rx.count;
+ int i;
+
+ dev_dbg(context->driver->dev, "submitting data to LIRC\n");
+
+ value *= BIT_DURATION;
+ value &= PULSE_MASK;
+ if (context->rx.prev_bit)
+ value |= PULSE_BIT;
+
+ for (i = 0; i < 4; ++i)
+ buf[i] = value>>(i*8);
+
+ lirc_buffer_write(context->driver->rbuf, buf);
+ wake_up(&context->driver->rbuf->wait_poll);
+ return;
+}
+
+static inline int tv2int(const struct timeval *a, const struct timeval *b)
+{
+ int usecs = 0;
+ int sec = 0;
+
+ if (b->tv_usec > a->tv_usec) {
+ usecs = 1000000;
+ sec--;
+ }
+
+ usecs += a->tv_usec - b->tv_usec;
+
+ sec += a->tv_sec - b->tv_sec;
+ sec *= 1000;
+ usecs /= 1000;
+ sec += usecs;
+
+ if (sec < 0)
+ sec = 1000;
+
+ return sec;
+}
+
+/**
+ * Process the incoming packet
+ */
+static void imon_incoming_packet(struct imon_context *context,
+ struct urb *urb, int intf)
+{
+ int len = urb->actual_length;
+ unsigned char *buf = urb->transfer_buffer;
+ struct device *dev = context->driver->dev;
+ int octet, bit;
+ unsigned char mask;
+ int i, chunk_num;
+
+ /*
+ * just bail out if no listening IR client
+ */
+ if (!context->ir_isopen)
+ return;
+
+ if (len != 8) {
+ dev_warn(dev, "imon %s: invalid incoming packet "
+ "size (len = %d, intf%d)\n", __func__, len, intf);
+ return;
+ }
+
+ if (debug) {
+ printk(KERN_INFO "raw packet: ");
+ for (i = 0; i < len; ++i)
+ printk("%02x ", buf[i]);
+ printk("\n");
+ }
+
+ /*
+ * Translate received data to pulse and space lengths.
+ * Received data is active low, i.e. pulses are 0 and
+ * spaces are 1.
+ *
+ * My original algorithm was essentially similar to
+ * Changwoo Ryu's with the exception that he switched
+ * the incoming bits to active high and also fed an
+ * initial space to LIRC at the start of a new sequence
+ * if the previous bit was a pulse.
+ *
+ * I've decided to adopt his algorithm.
+ */
+
+ if (buf[7] == 1 && context->rx.initial_space) {
+ /* LIRC requires a leading space */
+ context->rx.prev_bit = 0;
+ context->rx.count = 4;
+ submit_data(context);
+ context->rx.count = 0;
+ }
+
+ for (octet = 0; octet < 5; ++octet) {
+ mask = 0x80;
+ for (bit = 0; bit < 8; ++bit) {
+ int curr_bit = !(buf[octet] & mask);
+ if (curr_bit != context->rx.prev_bit) {
+ if (context->rx.count) {
+ submit_data(context);
+ context->rx.count = 0;
+ }
+ context->rx.prev_bit = curr_bit;
+ }
+ ++context->rx.count;
+ mask >>= 1;
+ }
+ }
+
+ if (chunk_num == 10) {
+ if (context->rx.count) {
+ submit_data(context);
+ context->rx.count = 0;
+ }
+ context->rx.initial_space = context->rx.prev_bit;
+ }
+}
+
+/**
+ * Callback function for USB core API: receive data
+ */
+static void usb_rx_callback(struct urb *urb)
+{
+ struct imon_context *context;
+ unsigned char *buf;
+ int len;
+ int intfnum = 0;
+
+ if (!urb)
+ return;
+
+ context = (struct imon_context *)urb->context;
+ if (!context)
+ return;
+
+ buf = urb->transfer_buffer;
+ len = urb->actual_length;
+
+ switch (urb->status) {
+ case -ENOENT: /* usbcore unlink successful! */
+ return;
+
+ case 0:
+ imon_incoming_packet(context, urb, intfnum);
+ break;
+
+ default:
+ dev_warn(context->driver->dev, "imon %s: status(%d): ignored\n",
+ __func__, urb->status);
+ break;
+ }
+
+ usb_submit_urb(context->rx_urb, GFP_ATOMIC);
+
+ return;
+}
+
+/**
+ * Callback function for USB core API: Probe
+ */
+static int imon_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usbdev = NULL;
+ struct usb_host_interface *iface_desc = NULL;
+ struct usb_endpoint_descriptor *rx_endpoint = NULL;
+ struct usb_endpoint_descriptor *tx_endpoint = NULL;
+ struct urb *rx_urb = NULL;
+ struct urb *tx_urb = NULL;
+ struct lirc_driver *driver = NULL;
+ struct lirc_buffer *rbuf = NULL;
+ struct device *dev = &interface->dev;
+ int ifnum;
+ int lirc_minor = 0;
+ int num_endpts;
+ int retval = 0;
+ int display_ep_found = 0;
+ int ir_ep_found = 0;
+ int alloc_status = 0;
+ int vfd_proto_6p = 0;
+ int code_length;
+ struct imon_context *context = NULL;
+ int i;
+ u16 vendor, product;
+
+ context = kzalloc(sizeof(struct imon_context), GFP_KERNEL);
+ if (!context) {
+ err("%s: kzalloc failed for context", __func__);
+ alloc_status = 1;
+ goto alloc_status_switch;
+ }
+
+ /*
+ * Try to auto-detect the type of display if the user hasn't set
+ * it by hand via the display_type modparam. Default is VFD.
+ */
+ if (usb_match_id(interface, ir_only_list))
+ context->display = 0;
+ else
+ context->display = 1;
+
+ code_length = BUF_CHUNK_SIZE * 8;
+
+ usbdev = usb_get_dev(interface_to_usbdev(interface));
+ iface_desc = interface->cur_altsetting;
+ num_endpts = iface_desc->desc.bNumEndpoints;
+ ifnum = iface_desc->desc.bInterfaceNumber;
+ vendor = le16_to_cpu(usbdev->descriptor.idVendor);
+ product = le16_to_cpu(usbdev->descriptor.idProduct);
+
+ dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n",
+ __func__, vendor, product, ifnum);
+
+ /* prevent races probing devices w/multiple interfaces */
+ mutex_lock(&driver_lock);
+
+ /*
+ * Scan the endpoint list and set:
+ * first input endpoint = IR endpoint
+ * first output endpoint = display endpoint
+ */
+ for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) {
+ struct usb_endpoint_descriptor *ep;
+ int ep_dir;
+ int ep_type;
+ ep = &iface_desc->endpoint[i].desc;
+ ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+ ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+ if (!ir_ep_found &&
+ ep_dir == USB_DIR_IN &&
+ ep_type == USB_ENDPOINT_XFER_INT) {
+
+ rx_endpoint = ep;
+ ir_ep_found = 1;
+ dev_dbg(dev, "%s: found IR endpoint\n", __func__);
+
+ } else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
+ ep_type == USB_ENDPOINT_XFER_INT) {
+ tx_endpoint = ep;
+ display_ep_found = 1;
+ dev_dbg(dev, "%s: found display endpoint\n", __func__);
+ }
+ }
+
+ /*
+ * Some iMON receivers have no display. Unfortunately, it seems
+ * that SoundGraph recycles device IDs between devices both with
+ * and without... :\
+ */
+ if (context->display == 0) {
+ display_ep_found = 0;
+ dev_dbg(dev, "%s: device has no display\n", __func__);
+ }
+
+ /* Input endpoint is mandatory */
+ if (!ir_ep_found) {
+ err("%s: no valid input (IR) endpoint found.", __func__);
+ retval = -ENODEV;
+ alloc_status = 2;
+ goto alloc_status_switch;
+ }
+
+ /* Determine if display requires 6 packets */
+ if (display_ep_found) {
+ if (usb_match_id(interface, vfd_proto_6p_list))
+ vfd_proto_6p = 1;
+
+ dev_dbg(dev, "%s: vfd_proto_6p: %d\n",
+ __func__, vfd_proto_6p);
+ }
+
+ driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+ if (!driver) {
+ err("%s: kzalloc failed for lirc_driver", __func__);
+ alloc_status = 2;
+ goto alloc_status_switch;
+ }
+ rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+ if (!rbuf) {
+ err("%s: kmalloc failed for lirc_buffer", __func__);
+ alloc_status = 3;
+ goto alloc_status_switch;
+ }
+ if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) {
+ err("%s: lirc_buffer_init failed", __func__);
+ alloc_status = 4;
+ goto alloc_status_switch;
+ }
+ rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!rx_urb) {
+ err("%s: usb_alloc_urb failed for IR urb", __func__);
+ alloc_status = 5;
+ goto alloc_status_switch;
+ }
+ tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!tx_urb) {
+ err("%s: usb_alloc_urb failed for display urb",
+ __func__);
+ alloc_status = 6;
+ goto alloc_status_switch;
+ }
+
+ mutex_init(&context->ctx_lock);
+ context->vfd_proto_6p = vfd_proto_6p;
+
+ strcpy(driver->name, MOD_NAME);
+ driver->minor = -1;
+ driver->code_length = sizeof(int) * 8;
+ driver->sample_rate = 0;
+ driver->features = LIRC_CAN_REC_MODE2;
+ driver->data = context;
+ driver->rbuf = rbuf;
+ driver->set_use_inc = ir_open;
+ driver->set_use_dec = ir_close;
+ driver->dev = &interface->dev;
+ driver->owner = THIS_MODULE;
+
+ mutex_lock(&context->ctx_lock);
+
+ context->driver = driver;
+ /* start out in keyboard mode */
+
+ lirc_minor = lirc_register_driver(driver);
+ if (lirc_minor < 0) {
+ err("%s: lirc_register_driver failed", __func__);
+ alloc_status = 7;
+ goto alloc_status_switch;
+ } else
+ dev_info(dev, "Registered iMON driver "
+ "(lirc minor: %d)\n", lirc_minor);
+
+ /* Needed while unregistering! */
+ driver->minor = lirc_minor;
+
+ context->usbdev = usbdev;
+ context->dev_present = 1;
+ context->rx_endpoint = rx_endpoint;
+ context->rx_urb = rx_urb;
+
+ /*
+ * tx is used to send characters to lcd/vfd, associate RF
+ * remotes, set IR protocol, and maybe more...
+ */
+ context->tx_endpoint = tx_endpoint;
+ context->tx_urb = tx_urb;
+
+ if (display_ep_found)
+ context->display = 1;
+
+ usb_fill_int_urb(context->rx_urb, context->usbdev,
+ usb_rcvintpipe(context->usbdev,
+ context->rx_endpoint->bEndpointAddress),
+ context->usb_rx_buf, sizeof(context->usb_rx_buf),
+ usb_rx_callback, context,
+ context->rx_endpoint->bInterval);
+
+ retval = usb_submit_urb(context->rx_urb, GFP_KERNEL);
+
+ if (retval) {
+ err("%s: usb_submit_urb failed for intf0 (%d)",
+ __func__, retval);
+ mutex_unlock(&context->ctx_lock);
+ goto exit;
+ }
+
+ usb_set_intfdata(interface, context);
+
+ if (context->display && ifnum == 0) {
+ dev_dbg(dev, "%s: Registering iMON display with sysfs\n",
+ __func__);
+
+ if (usb_register_dev(interface, &imon_class)) {
+ /* Not a fatal error, so ignore */
+ dev_info(dev, "%s: could not get a minor number for "
+ "display\n", __func__);
+ }
+ }
+
+ dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
+ "usb<%d:%d> initialized\n", vendor, product, ifnum,
+ usbdev->bus->busnum, usbdev->devnum);
+
+alloc_status_switch:
+ mutex_unlock(&context->ctx_lock);
+
+ switch (alloc_status) {
+ case 7:
+ usb_free_urb(tx_urb);
+ case 6:
+ usb_free_urb(rx_urb);
+ case 5:
+ if (rbuf)
+ lirc_buffer_free(rbuf);
+ case 4:
+ kfree(rbuf);
+ case 3:
+ kfree(driver);
+ case 2:
+ kfree(context);
+ context = NULL;
+ case 1:
+ if (retval != -ENODEV)
+ retval = -ENOMEM;
+ break;
+ case 0:
+ retval = 0;
+ }
+
+exit:
+ mutex_unlock(&driver_lock);
+
+ return retval;
+}
+
+/**
+ * Callback function for USB core API: disconnect
+ */
+static void imon_disconnect(struct usb_interface *interface)
+{
+ struct imon_context *context;
+ int ifnum;
+
+ /* prevent races with ir_open()/display_open() */
+ mutex_lock(&driver_lock);
+
+ context = usb_get_intfdata(interface);
+ ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
+
+ mutex_lock(&context->ctx_lock);
+
+ usb_set_intfdata(interface, NULL);
+
+ /* Abort ongoing write */
+ if (atomic_read(&context->tx.busy)) {
+ usb_kill_urb(context->tx_urb);
+ complete_all(&context->tx.finished);
+ }
+
+ context->dev_present = 0;
+ usb_kill_urb(context->rx_urb);
+ if (context->display)
+ usb_deregister_dev(interface, &imon_class);
+
+ if (!context->ir_isopen && !context->dev_present) {
+ deregister_from_lirc(context);
+ mutex_unlock(&context->ctx_lock);
+ if (!context->display_isopen)
+ free_imon_context(context);
+ } else
+ mutex_unlock(&context->ctx_lock);
+
+ mutex_unlock(&driver_lock);
+
+ printk(KERN_INFO "%s: iMON device (intf%d) disconnected\n",
+ __func__, ifnum);
+}
+
+static int imon_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct imon_context *context = usb_get_intfdata(intf);
+
+ usb_kill_urb(context->rx_urb);
+
+ return 0;
+}
+
+static int imon_resume(struct usb_interface *intf)
+{
+ int rc = 0;
+ struct imon_context *context = usb_get_intfdata(intf);
+
+ usb_fill_int_urb(context->rx_urb, context->usbdev,
+ usb_rcvintpipe(context->usbdev,
+ context->rx_endpoint->bEndpointAddress),
+ context->usb_rx_buf, sizeof(context->usb_rx_buf),
+ usb_rx_callback, context,
+ context->rx_endpoint->bInterval);
+
+ rc = usb_submit_urb(context->rx_urb, GFP_ATOMIC);
+
+ return rc;
+}
+
+static int __init imon_init(void)
+{
+ int rc;
+
+ printk(KERN_INFO MOD_NAME ": " MOD_DESC ", v" MOD_VERSION "\n");
+
+ rc = usb_register(&imon_driver);
+ if (rc) {
+ err("%s: usb register failed(%d)", __func__, rc);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __exit imon_exit(void)
+{
+ usb_deregister(&imon_driver);
+ printk(KERN_INFO MOD_NAME ": module removed. Goodbye!\n");
+}
+
+module_init(imon_init);
+module_exit(imon_exit);
diff --git a/drivers/staging/lirc/lirc_it87.c b/drivers/staging/lirc/lirc_it87.c
new file mode 100644
index 0000000..ec11c0e
--- /dev/null
+++ b/drivers/staging/lirc/lirc_it87.c
@@ -0,0 +1,1022 @@
+/*
+ * LIRC driver for ITE IT8712/IT8705 CIR port
+ *
+ * Copyright (C) 2001 Hans-Gunter Lutke Uphues <hg_lu@web.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ * ITE IT8705 and IT8712(not tested) and IT8720 CIR-port support for lirc based
+ * via cut and paste from lirc_sir.c (C) 2000 Milan Pikula
+ *
+ * Attention: Sendmode only tested with debugging logs
+ *
+ * 2001/02/27 Christoph Bartelmus <lirc@bartelmus.de> :
+ * reimplemented read function
+ * 2005/06/05 Andrew Calkin implemented support for Asus Digimatrix,
+ * based on work of the following member of the Outertrack Digimatrix
+ * Forum: Art103 <r_tay@hotmail.com>
+ * 2009/12/24 James Edwards <jimbo-lirc@edwardsclan.net> implemeted support
+ * for ITE8704/ITE8718, on my machine, the DSDT reports 8704, but the
+ * chip identifies as 18.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <asm/system.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/fcntl.h>
+
+#include <linux/timer.h>
+#include <linux/pnp.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+#include "lirc_it87.h"
+
+#ifdef LIRC_IT87_DIGIMATRIX
+static int digimatrix = 1;
+static int it87_freq = 36; /* kHz */
+static int irq = 9;
+#else
+static int digimatrix;
+static int it87_freq = 38; /* kHz */
+static int irq = IT87_CIR_DEFAULT_IRQ;
+#endif
+
+static unsigned long it87_bits_in_byte_out;
+static unsigned long it87_send_counter;
+static unsigned char it87_RXEN_mask = IT87_CIR_RCR_RXEN;
+
+#define RBUF_LEN 1024
+
+#define LIRC_DRIVER_NAME "lirc_it87"
+
+/* timeout for sequences in jiffies (=5/100s) */
+/* must be longer than TIME_CONST */
+#define IT87_TIMEOUT (HZ*5/100)
+
+/* module parameters */
+static int debug;
+#define dprintk(fmt, args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \
+ fmt, ## args); \
+ } while (0)
+
+static int io = IT87_CIR_DEFAULT_IOBASE;
+/* receiver demodulator default: off */
+static int it87_enable_demodulator;
+
+static int timer_enabled;
+static DEFINE_SPINLOCK(timer_lock);
+static struct timer_list timerlist;
+/* time of last signal change detected */
+static struct timeval last_tv = {0, 0};
+/* time of last UART data ready interrupt */
+static struct timeval last_intr_tv = {0, 0};
+static int last_value;
+
+static DECLARE_WAIT_QUEUE_HEAD(lirc_read_queue);
+
+static DEFINE_SPINLOCK(hardware_lock);
+static DEFINE_SPINLOCK(dev_lock);
+static bool device_open;
+
+static int rx_buf[RBUF_LEN];
+unsigned int rx_tail, rx_head;
+
+static struct pnp_driver it87_pnp_driver;
+
+/* SECTION: Prototypes */
+
+/* Communication with user-space */
+static int lirc_open(struct inode *inode, struct file *file);
+static int lirc_close(struct inode *inode, struct file *file);
+static unsigned int lirc_poll(struct file *file, poll_table *wait);
+static ssize_t lirc_read(struct file *file, char *buf,
+ size_t count, loff_t *ppos);
+static ssize_t lirc_write(struct file *file, const char *buf,
+ size_t n, loff_t *pos);
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
+static void add_read_queue(int flag, unsigned long val);
+static int init_chrdev(void);
+static void drop_chrdev(void);
+/* Hardware */
+static irqreturn_t it87_interrupt(int irq, void *dev_id);
+static void send_space(unsigned long len);
+static void send_pulse(unsigned long len);
+static void init_send(void);
+static void terminate_send(unsigned long len);
+static int init_hardware(void);
+static void drop_hardware(void);
+/* Initialisation */
+static int init_port(void);
+static void drop_port(void);
+
+
+/* SECTION: Communication with user-space */
+
+static int lirc_open(struct inode *inode, struct file *file)
+{
+ spin_lock(&dev_lock);
+ if (device_open) {
+ spin_unlock(&dev_lock);
+ return -EBUSY;
+ }
+ device_open = true;
+ spin_unlock(&dev_lock);
+ return 0;
+}
+
+
+static int lirc_close(struct inode *inode, struct file *file)
+{
+ spin_lock(&dev_lock);
+ device_open = false;
+ spin_unlock(&dev_lock);
+ return 0;
+}
+
+
+static unsigned int lirc_poll(struct file *file, poll_table *wait)
+{
+ poll_wait(file, &lirc_read_queue, wait);
+ if (rx_head != rx_tail)
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+
+static ssize_t lirc_read(struct file *file, char *buf,
+ size_t count, loff_t *ppos)
+{
+ int n = 0;
+ int retval = 0;
+
+ while (n < count) {
+ if (file->f_flags & O_NONBLOCK && rx_head == rx_tail) {
+ retval = -EAGAIN;
+ break;
+ }
+ retval = wait_event_interruptible(lirc_read_queue,
+ rx_head != rx_tail);
+ if (retval)
+ break;
+
+ if (copy_to_user((void *) buf + n, (void *) (rx_buf + rx_head),
+ sizeof(int))) {
+ retval = -EFAULT;
+ break;
+ }
+ rx_head = (rx_head + 1) & (RBUF_LEN - 1);
+ n += sizeof(int);
+ }
+ if (n)
+ return n;
+ return retval;
+}
+
+
+static ssize_t lirc_write(struct file *file, const char *buf,
+ size_t n, loff_t *pos)
+{
+ int i = 0;
+ int *tx_buf;
+
+ if (n % sizeof(int))
+ return -EINVAL;
+ tx_buf = memdup_user(buf, n);
+ if (IS_ERR(tx_buf))
+ return PTR_ERR(tx_buf);
+ n /= sizeof(int);
+ init_send();
+ while (1) {
+ if (i >= n)
+ break;
+ if (tx_buf[i])
+ send_pulse(tx_buf[i]);
+ i++;
+ if (i >= n)
+ break;
+ if (tx_buf[i])
+ send_space(tx_buf[i]);
+ i++;
+ }
+ terminate_send(tx_buf[i - 1]);
+ return n;
+}
+
+
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+ int retval = 0;
+ unsigned long value = 0;
+ unsigned int ivalue;
+ unsigned long hw_flags;
+
+ if (cmd == LIRC_GET_FEATURES)
+ value = LIRC_CAN_SEND_PULSE |
+ LIRC_CAN_SET_SEND_CARRIER |
+ LIRC_CAN_REC_MODE2;
+ else if (cmd == LIRC_GET_SEND_MODE)
+ value = LIRC_MODE_PULSE;
+ else if (cmd == LIRC_GET_REC_MODE)
+ value = LIRC_MODE_MODE2;
+
+ switch (cmd) {
+ case LIRC_GET_FEATURES:
+ case LIRC_GET_SEND_MODE:
+ case LIRC_GET_REC_MODE:
+ retval = put_user(value, (unsigned long *) arg);
+ break;
+
+ case LIRC_SET_SEND_MODE:
+ case LIRC_SET_REC_MODE:
+ retval = get_user(value, (unsigned long *) arg);
+ break;
+
+ case LIRC_SET_SEND_CARRIER:
+ retval = get_user(ivalue, (unsigned int *) arg);
+ if (retval)
+ return retval;
+ ivalue /= 1000;
+ if (ivalue > IT87_CIR_FREQ_MAX ||
+ ivalue < IT87_CIR_FREQ_MIN)
+ return -EINVAL;
+
+ it87_freq = ivalue;
+
+ spin_lock_irqsave(&hardware_lock, hw_flags);
+ outb(((inb(io + IT87_CIR_TCR2) & IT87_CIR_TCR2_TXMPW) |
+ (it87_freq - IT87_CIR_FREQ_MIN) << 3),
+ io + IT87_CIR_TCR2);
+ spin_unlock_irqrestore(&hardware_lock, hw_flags);
+ dprintk("demodulation frequency: %d kHz\n", it87_freq);
+
+ break;
+
+ default:
+ retval = -EINVAL;
+ }
+
+ if (retval)
+ return retval;
+
+ if (cmd == LIRC_SET_REC_MODE) {
+ if (value != LIRC_MODE_MODE2)
+ retval = -ENOSYS;
+ } else if (cmd == LIRC_SET_SEND_MODE) {
+ if (value != LIRC_MODE_PULSE)
+ retval = -ENOSYS;
+ }
+ return retval;
+}
+
+static void add_read_queue(int flag, unsigned long val)
+{
+ unsigned int new_rx_tail;
+ int newval;
+
+ dprintk("add flag %d with val %lu\n", flag, val);
+
+ newval = val & PULSE_MASK;
+
+ /*
+ * statistically, pulses are ~TIME_CONST/2 too long. we could
+ * maybe make this more exact, but this is good enough
+ */
+ if (flag) {
+ /* pulse */
+ if (newval > TIME_CONST / 2)
+ newval -= TIME_CONST / 2;
+ else /* should not ever happen */
+ newval = 1;
+ newval |= PULSE_BIT;
+ } else
+ newval += TIME_CONST / 2;
+ new_rx_tail = (rx_tail + 1) & (RBUF_LEN - 1);
+ if (new_rx_tail == rx_head) {
+ dprintk("Buffer overrun.\n");
+ return;
+ }
+ rx_buf[rx_tail] = newval;
+ rx_tail = new_rx_tail;
+ wake_up_interruptible(&lirc_read_queue);
+}
+
+
+static const struct file_operations lirc_fops = {
+ .owner = THIS_MODULE,
+ .read = lirc_read,
+ .write = lirc_write,
+ .poll = lirc_poll,
+ .unlocked_ioctl = lirc_ioctl,
+ .open = lirc_open,
+ .release = lirc_close,
+};
+
+static int set_use_inc(void *data)
+{
+ return 0;
+}
+
+static void set_use_dec(void *data)
+{
+}
+
+static struct lirc_driver driver = {
+ .name = LIRC_DRIVER_NAME,
+ .minor = -1,
+ .code_length = 1,
+ .sample_rate = 0,
+ .data = NULL,
+ .add_to_buf = NULL,
+ .set_use_inc = set_use_inc,
+ .set_use_dec = set_use_dec,
+ .fops = &lirc_fops,
+ .dev = NULL,
+ .owner = THIS_MODULE,
+};
+
+
+static int init_chrdev(void)
+{
+ driver.minor = lirc_register_driver(&driver);
+
+ if (driver.minor < 0) {
+ printk(KERN_ERR LIRC_DRIVER_NAME ": init_chrdev() failed.\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+
+static void drop_chrdev(void)
+{
+ lirc_unregister_driver(driver.minor);
+}
+
+
+/* SECTION: Hardware */
+static long delta(struct timeval *tv1, struct timeval *tv2)
+{
+ unsigned long deltv;
+
+ deltv = tv2->tv_sec - tv1->tv_sec;
+ if (deltv > 15)
+ deltv = 0xFFFFFF;
+ else
+ deltv = deltv*1000000 + tv2->tv_usec - tv1->tv_usec;
+ return deltv;
+}
+
+static void it87_timeout(unsigned long data)
+{
+ unsigned long flags;
+
+ /* avoid interference with interrupt */
+ spin_lock_irqsave(&timer_lock, flags);
+
+ if (digimatrix) {
+ /* We have timed out. Disable the RX mechanism. */
+
+ outb((inb(io + IT87_CIR_RCR) & ~IT87_CIR_RCR_RXEN) |
+ IT87_CIR_RCR_RXACT, io + IT87_CIR_RCR);
+ if (it87_RXEN_mask)
+ outb(inb(io + IT87_CIR_RCR) | IT87_CIR_RCR_RXEN,
+ io + IT87_CIR_RCR);
+ dprintk(" TIMEOUT\n");
+ timer_enabled = 0;
+
+ /* fifo clear */
+ outb(inb(io + IT87_CIR_TCR1) | IT87_CIR_TCR1_FIFOCLR,
+ io+IT87_CIR_TCR1);
+
+ } else {
+ /*
+ * if last received signal was a pulse, but receiving stopped
+ * within the 9 bit frame, we need to finish this pulse and
+ * simulate a signal change to from pulse to space. Otherwise
+ * upper layers will receive two sequences next time.
+ */
+
+ if (last_value) {
+ unsigned long pulse_end;
+
+ /* determine 'virtual' pulse end: */
+ pulse_end = delta(&last_tv, &last_intr_tv);
+ dprintk("timeout add %d for %lu usec\n",
+ last_value, pulse_end);
+ add_read_queue(last_value, pulse_end);
+ last_value = 0;
+ last_tv = last_intr_tv;
+ }
+ }
+ spin_unlock_irqrestore(&timer_lock, flags);
+}
+
+static irqreturn_t it87_interrupt(int irq, void *dev_id)
+{
+ unsigned char data;
+ struct timeval curr_tv;
+ static unsigned long deltv;
+ unsigned long deltintrtv;
+ unsigned long flags, hw_flags;
+ int iir, lsr;
+ int fifo = 0;
+ static char lastbit;
+ char bit;
+
+ /* Bit duration in microseconds */
+ const unsigned long bit_duration = 1000000ul /
+ (115200 / IT87_CIR_BAUDRATE_DIVISOR);
+
+
+ iir = inb(io + IT87_CIR_IIR);
+
+ switch (iir & IT87_CIR_IIR_IID) {
+ case 0x4:
+ case 0x6:
+ lsr = inb(io + IT87_CIR_RSR) & (IT87_CIR_RSR_RXFTO |
+ IT87_CIR_RSR_RXFBC);
+ fifo = lsr & IT87_CIR_RSR_RXFBC;
+ dprintk("iir: 0x%x fifo: 0x%x\n", iir, lsr);
+
+ /* avoid interference with timer */
+ spin_lock_irqsave(&timer_lock, flags);
+ spin_lock_irqsave(&hardware_lock, hw_flags);
+ if (digimatrix) {
+ static unsigned long acc_pulse;
+ static unsigned long acc_space;
+
+ do {
+ data = inb(io + IT87_CIR_DR);
+ data = ~data;
+ fifo--;
+ if (data != 0x00) {
+ if (timer_enabled)
+ del_timer(&timerlist);
+ /*
+ * start timer for end of
+ * sequence detection
+ */
+ timerlist.expires = jiffies +
+ IT87_TIMEOUT;
+ add_timer(&timerlist);
+ timer_enabled = 1;
+ }
+ /* Loop through */
+ for (bit = 0; bit < 8; ++bit) {
+ if ((data >> bit) & 1) {
+ ++acc_pulse;
+ if (lastbit == 0) {
+ add_read_queue(0,
+ acc_space *
+ bit_duration);
+ acc_space = 0;
+ }
+ } else {
+ ++acc_space;
+ if (lastbit == 1) {
+ add_read_queue(1,
+ acc_pulse *
+ bit_duration);
+ acc_pulse = 0;
+ }
+ }
+ lastbit = (data >> bit) & 1;
+ }
+
+ } while (fifo != 0);
+ } else { /* Normal Operation */
+ do {
+ del_timer(&timerlist);
+ data = inb(io + IT87_CIR_DR);
+
+ dprintk("data=%02x\n", data);
+ do_gettimeofday(&curr_tv);
+ deltv = delta(&last_tv, &curr_tv);
+ deltintrtv = delta(&last_intr_tv, &curr_tv);
+
+ dprintk("t %lu , d %d\n",
+ deltintrtv, (int)data);
+
+ /*
+ * if nothing came in last 2 cycles,
+ * it was gap
+ */
+ if (deltintrtv > TIME_CONST * 2) {
+ if (last_value) {
+ dprintk("GAP\n");
+
+ /* simulate signal change */
+ add_read_queue(last_value,
+ deltv -
+ deltintrtv);
+ last_value = 0;
+ last_tv.tv_sec =
+ last_intr_tv.tv_sec;
+ last_tv.tv_usec =
+ last_intr_tv.tv_usec;
+ deltv = deltintrtv;
+ }
+ }
+ data = 1;
+ if (data ^ last_value) {
+ /*
+ * deltintrtv > 2*TIME_CONST,
+ * remember ? the other case is
+ * timeout
+ */
+ add_read_queue(last_value,
+ deltv-TIME_CONST);
+ last_value = data;
+ last_tv = curr_tv;
+ if (last_tv.tv_usec >= TIME_CONST)
+ last_tv.tv_usec -= TIME_CONST;
+ else {
+ last_tv.tv_sec--;
+ last_tv.tv_usec += 1000000 -
+ TIME_CONST;
+ }
+ }
+ last_intr_tv = curr_tv;
+ if (data) {
+ /*
+ * start timer for end of
+ * sequence detection
+ */
+ timerlist.expires =
+ jiffies + IT87_TIMEOUT;
+ add_timer(&timerlist);
+ }
+ outb((inb(io + IT87_CIR_RCR) &
+ ~IT87_CIR_RCR_RXEN) |
+ IT87_CIR_RCR_RXACT,
+ io + IT87_CIR_RCR);
+ if (it87_RXEN_mask)
+ outb(inb(io + IT87_CIR_RCR) |
+ IT87_CIR_RCR_RXEN,
+ io + IT87_CIR_RCR);
+ fifo--;
+ } while (fifo != 0);
+ }
+ spin_unlock_irqrestore(&hardware_lock, hw_flags);
+ spin_unlock_irqrestore(&timer_lock, flags);
+
+ return IRQ_RETVAL(IRQ_HANDLED);
+
+ default:
+ /* not our irq */
+ dprintk("unknown IRQ (shouldn't happen) !!\n");
+ return IRQ_RETVAL(IRQ_NONE);
+ }
+}
+
+
+static void send_it87(unsigned long len, unsigned long stime,
+ unsigned char send_byte, unsigned int count_bits)
+{
+ long count = len / stime;
+ long time_left = 0;
+ static unsigned char byte_out;
+ unsigned long hw_flags;
+
+ dprintk("%s: len=%ld, sb=%d\n", __func__, len, send_byte);
+
+ time_left = (long)len - (long)count * (long)stime;
+ count += ((2 * time_left) / stime);
+ while (count) {
+ long i = 0;
+ for (i = 0; i < count_bits; i++) {
+ byte_out = (byte_out << 1) | (send_byte & 1);
+ it87_bits_in_byte_out++;
+ }
+ if (it87_bits_in_byte_out == 8) {
+ dprintk("out=0x%x, tsr_txfbc: 0x%x\n",
+ byte_out,
+ inb(io + IT87_CIR_TSR) &
+ IT87_CIR_TSR_TXFBC);
+
+ while ((inb(io + IT87_CIR_TSR) &
+ IT87_CIR_TSR_TXFBC) >= IT87_CIR_FIFO_SIZE)
+ ;
+
+ spin_lock_irqsave(&hardware_lock, hw_flags);
+ outb(byte_out, io + IT87_CIR_DR);
+ spin_unlock_irqrestore(&hardware_lock, hw_flags);
+
+ it87_bits_in_byte_out = 0;
+ it87_send_counter++;
+ byte_out = 0;
+ }
+ count--;
+ }
+}
+
+
+/*TODO: maybe exchange space and pulse because it8705 only modulates 0-bits */
+
+static void send_space(unsigned long len)
+{
+ send_it87(len, TIME_CONST, IT87_CIR_SPACE, IT87_CIR_BAUDRATE_DIVISOR);
+}
+
+static void send_pulse(unsigned long len)
+{
+ send_it87(len, TIME_CONST, IT87_CIR_PULSE, IT87_CIR_BAUDRATE_DIVISOR);
+}
+
+
+static void init_send()
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hardware_lock, flags);
+ /* RXEN=0: receiver disable */
+ it87_RXEN_mask = 0;
+ outb(inb(io + IT87_CIR_RCR) & ~IT87_CIR_RCR_RXEN,
+ io + IT87_CIR_RCR);
+ spin_unlock_irqrestore(&hardware_lock, flags);
+ it87_bits_in_byte_out = 0;
+ it87_send_counter = 0;
+}
+
+
+static void terminate_send(unsigned long len)
+{
+ unsigned long flags;
+ unsigned long last = 0;
+
+ last = it87_send_counter;
+ /* make sure all necessary data has been sent */
+ while (last == it87_send_counter)
+ send_space(len);
+ /* wait until all data sent */
+ while ((inb(io + IT87_CIR_TSR) & IT87_CIR_TSR_TXFBC) != 0)
+ ;
+ /* then re-enable receiver */
+ spin_lock_irqsave(&hardware_lock, flags);
+ it87_RXEN_mask = IT87_CIR_RCR_RXEN;
+ outb(inb(io + IT87_CIR_RCR) | IT87_CIR_RCR_RXEN,
+ io + IT87_CIR_RCR);
+ spin_unlock_irqrestore(&hardware_lock, flags);
+}
+
+
+static int init_hardware(void)
+{
+ unsigned long flags;
+ unsigned char it87_rcr = 0;
+
+ spin_lock_irqsave(&hardware_lock, flags);
+ /* init cir-port */
+ /* enable r/w-access to Baudrate-Register */
+ outb(IT87_CIR_IER_BR, io + IT87_CIR_IER);
+ outb(IT87_CIR_BAUDRATE_DIVISOR % 0x100, io+IT87_CIR_BDLR);
+ outb(IT87_CIR_BAUDRATE_DIVISOR / 0x100, io+IT87_CIR_BDHR);
+ /* Baudrate Register off, define IRQs: Input only */
+ if (digimatrix) {
+ outb(IT87_CIR_IER_IEC | IT87_CIR_IER_RFOIE, io + IT87_CIR_IER);
+ /* RX: HCFS=0, RXDCR = 001b (33,75..38,25 kHz), RXEN=1 */
+ } else {
+ outb(IT87_CIR_IER_IEC | IT87_CIR_IER_RDAIE, io + IT87_CIR_IER);
+ /* RX: HCFS=0, RXDCR = 001b (35,6..40,3 kHz), RXEN=1 */
+ }
+ it87_rcr = (IT87_CIR_RCR_RXEN & it87_RXEN_mask) | 0x1;
+ if (it87_enable_demodulator)
+ it87_rcr |= IT87_CIR_RCR_RXEND;
+ outb(it87_rcr, io + IT87_CIR_RCR);
+ if (digimatrix) {
+ /* Set FIFO depth to 1 byte, and disable TX */
+ outb(inb(io + IT87_CIR_TCR1) | 0x00,
+ io + IT87_CIR_TCR1);
+
+ /*
+ * TX: it87_freq (36kHz), 'reserved' sensitivity
+ * setting (0x00)
+ */
+ outb(((it87_freq - IT87_CIR_FREQ_MIN) << 3) | 0x00,
+ io + IT87_CIR_TCR2);
+ } else {
+ /* TX: 38kHz, 13,3us (pulse-width) */
+ outb(((it87_freq - IT87_CIR_FREQ_MIN) << 3) | 0x06,
+ io + IT87_CIR_TCR2);
+ }
+ spin_unlock_irqrestore(&hardware_lock, flags);
+ return 0;
+}
+
+
+static void drop_hardware(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hardware_lock, flags);
+ disable_irq(irq);
+ /* receiver disable */
+ it87_RXEN_mask = 0;
+ outb(0x1, io + IT87_CIR_RCR);
+ /* turn off irqs */
+ outb(0, io + IT87_CIR_IER);
+ /* fifo clear */
+ outb(IT87_CIR_TCR1_FIFOCLR, io+IT87_CIR_TCR1);
+ /* reset */
+ outb(IT87_CIR_IER_RESET, io+IT87_CIR_IER);
+ enable_irq(irq);
+ spin_unlock_irqrestore(&hardware_lock, flags);
+}
+
+
+static unsigned char it87_read(unsigned char port)
+{
+ outb(port, IT87_ADRPORT);
+ return inb(IT87_DATAPORT);
+}
+
+
+static void it87_write(unsigned char port, unsigned char data)
+{
+ outb(port, IT87_ADRPORT);
+ outb(data, IT87_DATAPORT);
+}
+
+
+/* SECTION: Initialisation */
+
+static int init_port(void)
+{
+ unsigned long hw_flags;
+ int retval = 0;
+
+ unsigned char init_bytes[4] = IT87_INIT;
+ unsigned char it87_chipid = 0;
+ unsigned char ldn = 0;
+ unsigned int it87_io = 0;
+ unsigned int it87_irq = 0;
+
+ /* Enter MB PnP Mode */
+ outb(init_bytes[0], IT87_ADRPORT);
+ outb(init_bytes[1], IT87_ADRPORT);
+ outb(init_bytes[2], IT87_ADRPORT);
+ outb(init_bytes[3], IT87_ADRPORT);
+
+ /* 8712 or 8705 ? */
+ it87_chipid = it87_read(IT87_CHIP_ID1);
+ if (it87_chipid != 0x87) {
+ retval = -ENXIO;
+ return retval;
+ }
+ it87_chipid = it87_read(IT87_CHIP_ID2);
+ if ((it87_chipid != 0x05) &&
+ (it87_chipid != 0x12) &&
+ (it87_chipid != 0x18) &&
+ (it87_chipid != 0x20)) {
+ printk(KERN_INFO LIRC_DRIVER_NAME
+ ": no IT8704/05/12/18/20 found (claimed IT87%02x), "
+ "exiting..\n", it87_chipid);
+ retval = -ENXIO;
+ return retval;
+ }
+ printk(KERN_INFO LIRC_DRIVER_NAME
+ ": found IT87%02x.\n",
+ it87_chipid);
+
+ /* get I/O-Port and IRQ */
+ if (it87_chipid == 0x12 || it87_chipid == 0x18)
+ ldn = IT8712_CIR_LDN;
+ else
+ ldn = IT8705_CIR_LDN;
+ it87_write(IT87_LDN, ldn);
+
+ it87_io = it87_read(IT87_CIR_BASE_MSB) * 256 +
+ it87_read(IT87_CIR_BASE_LSB);
+ if (it87_io == 0) {
+ if (io == 0)
+ io = IT87_CIR_DEFAULT_IOBASE;
+ printk(KERN_INFO LIRC_DRIVER_NAME
+ ": set default io 0x%x\n",
+ io);
+ it87_write(IT87_CIR_BASE_MSB, io / 0x100);
+ it87_write(IT87_CIR_BASE_LSB, io % 0x100);
+ } else
+ io = it87_io;
+
+ it87_irq = it87_read(IT87_CIR_IRQ);
+ if (digimatrix || it87_irq == 0) {
+ if (irq == 0)
+ irq = IT87_CIR_DEFAULT_IRQ;
+ printk(KERN_INFO LIRC_DRIVER_NAME
+ ": set default irq 0x%x\n",
+ irq);
+ it87_write(IT87_CIR_IRQ, irq);
+ } else
+ irq = it87_irq;
+
+ spin_lock_irqsave(&hardware_lock, hw_flags);
+ /* reset */
+ outb(IT87_CIR_IER_RESET, io+IT87_CIR_IER);
+ /* fifo clear */
+ outb(IT87_CIR_TCR1_FIFOCLR |
+ /* IT87_CIR_TCR1_ILE | */
+ IT87_CIR_TCR1_TXRLE |
+ IT87_CIR_TCR1_TXENDF, io+IT87_CIR_TCR1);
+ spin_unlock_irqrestore(&hardware_lock, hw_flags);
+
+ /* get I/O port access and IRQ line */
+ if (request_region(io, 8, LIRC_DRIVER_NAME) == NULL) {
+ printk(KERN_ERR LIRC_DRIVER_NAME
+ ": i/o port 0x%.4x already in use.\n", io);
+ /* Leaving MB PnP Mode */
+ it87_write(IT87_CFGCTRL, 0x2);
+ return -EBUSY;
+ }
+
+ /* activate CIR-Device */
+ it87_write(IT87_CIR_ACT, 0x1);
+
+ /* Leaving MB PnP Mode */
+ it87_write(IT87_CFGCTRL, 0x2);
+
+ retval = request_irq(irq, it87_interrupt, 0 /*IRQF_DISABLED*/,
+ LIRC_DRIVER_NAME, NULL);
+ if (retval < 0) {
+ printk(KERN_ERR LIRC_DRIVER_NAME
+ ": IRQ %d already in use.\n",
+ irq);
+ release_region(io, 8);
+ return retval;
+ }
+
+ printk(KERN_INFO LIRC_DRIVER_NAME
+ ": I/O port 0x%.4x, IRQ %d.\n", io, irq);
+
+ init_timer(&timerlist);
+ timerlist.function = it87_timeout;
+ timerlist.data = 0xabadcafe;
+
+ return 0;
+}
+
+
+static void drop_port(void)
+{
+#if 0
+ unsigned char init_bytes[4] = IT87_INIT;
+
+ /* Enter MB PnP Mode */
+ outb(init_bytes[0], IT87_ADRPORT);
+ outb(init_bytes[1], IT87_ADRPORT);
+ outb(init_bytes[2], IT87_ADRPORT);
+ outb(init_bytes[3], IT87_ADRPORT);
+
+ /* deactivate CIR-Device */
+ it87_write(IT87_CIR_ACT, 0x0);
+
+ /* Leaving MB PnP Mode */
+ it87_write(IT87_CFGCTRL, 0x2);
+#endif
+
+ del_timer_sync(&timerlist);
+ free_irq(irq, NULL);
+ release_region(io, 8);
+}
+
+
+static int init_lirc_it87(void)
+{
+ int retval;
+
+ init_waitqueue_head(&lirc_read_queue);
+ retval = init_port();
+ if (retval < 0)
+ return retval;
+ init_hardware();
+ printk(KERN_INFO LIRC_DRIVER_NAME ": Installed.\n");
+ return 0;
+}
+
+static int it87_probe(struct pnp_dev *pnp_dev,
+ const struct pnp_device_id *dev_id)
+{
+ int retval;
+
+ driver.dev = &pnp_dev->dev;
+
+ retval = init_chrdev();
+ if (retval < 0)
+ return retval;
+
+ retval = init_lirc_it87();
+ if (retval)
+ goto init_lirc_it87_failed;
+
+ return 0;
+
+init_lirc_it87_failed:
+ drop_chrdev();
+
+ return retval;
+}
+
+static int __init lirc_it87_init(void)
+{
+ return pnp_register_driver(&it87_pnp_driver);
+}
+
+
+static void __exit lirc_it87_exit(void)
+{
+ drop_hardware();
+ drop_chrdev();
+ drop_port();
+ pnp_unregister_driver(&it87_pnp_driver);
+ printk(KERN_INFO LIRC_DRIVER_NAME ": Uninstalled.\n");
+}
+
+/* SECTION: PNP for ITE8704/18 */
+
+static const struct pnp_device_id pnp_dev_table[] = {
+ {"ITE8704", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
+
+static struct pnp_driver it87_pnp_driver = {
+ .name = LIRC_DRIVER_NAME,
+ .id_table = pnp_dev_table,
+ .probe = it87_probe,
+};
+
+module_init(lirc_it87_init);
+module_exit(lirc_it87_exit);
+
+MODULE_DESCRIPTION("LIRC driver for ITE IT8704/05/12/18/20 CIR port");
+MODULE_AUTHOR("Hans-Gunter Lutke Uphues");
+MODULE_LICENSE("GPL");
+
+module_param(io, int, S_IRUGO);
+MODULE_PARM_DESC(io, "I/O base address (default: 0x310)");
+
+module_param(irq, int, S_IRUGO);
+#ifdef LIRC_IT87_DIGIMATRIX
+MODULE_PARM_DESC(irq, "Interrupt (1,3-12) (default: 9)");
+#else
+MODULE_PARM_DESC(irq, "Interrupt (1,3-12) (default: 7)");
+#endif
+
+module_param(it87_enable_demodulator, bool, S_IRUGO);
+MODULE_PARM_DESC(it87_enable_demodulator,
+ "Receiver demodulator enable/disable (1/0), default: 0");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
+
+module_param(digimatrix, bool, S_IRUGO | S_IWUSR);
+#ifdef LIRC_IT87_DIGIMATRIX
+MODULE_PARM_DESC(digimatrix,
+ "Asus Digimatrix it87 compat. enable/disable (1/0), default: 1");
+#else
+MODULE_PARM_DESC(digimatrix,
+ "Asus Digimatrix it87 compat. enable/disable (1/0), default: 0");
+#endif
+
+
+module_param(it87_freq, int, S_IRUGO);
+#ifdef LIRC_IT87_DIGIMATRIX
+MODULE_PARM_DESC(it87_freq,
+ "Carrier demodulator frequency (kHz), (default: 36)");
+#else
+MODULE_PARM_DESC(it87_freq,
+ "Carrier demodulator frequency (kHz), (default: 38)");
+#endif
diff --git a/drivers/staging/lirc/lirc_it87.h b/drivers/staging/lirc/lirc_it87.h
new file mode 100644
index 0000000..cf021c8
--- /dev/null
+++ b/drivers/staging/lirc/lirc_it87.h
@@ -0,0 +1,116 @@
+/* lirc_it87.h */
+/* SECTION: Definitions */
+
+/********************************* ITE IT87xx ************************/
+
+/* based on the following documentation from ITE:
+ a) IT8712F Preliminary CIR Programming Guide V0.1
+ b) IT8705F Simple LPC I/O Preliminary Specification V0.3
+ c) IT8712F EC-LPC I/O Preliminary Specification V0.5
+*/
+
+/* IT8712/05 Ports: */
+#define IT87_ADRPORT 0x2e
+#define IT87_DATAPORT 0x2f
+#define IT87_INIT {0x87, 0x01, 0x55, 0x55}
+
+/* alternate Ports: */
+/*
+#define IT87_ADRPORT 0x4e
+#define IT87_DATAPORT 0x4f
+#define IT87_INIT {0x87, 0x01, 0x55, 0xaa}
+ */
+
+/* IT8712/05 Registers */
+#define IT87_CFGCTRL 0x2
+#define IT87_LDN 0x7
+#define IT87_CHIP_ID1 0x20
+#define IT87_CHIP_ID2 0x21
+#define IT87_CFG_VERSION 0x22
+#define IT87_SWSUSPEND 0x23
+
+#define IT8712_CIR_LDN 0xa
+#define IT8705_CIR_LDN 0x7
+
+/* CIR Configuration Registers: */
+#define IT87_CIR_ACT 0x30
+#define IT87_CIR_BASE_MSB 0x60
+#define IT87_CIR_BASE_LSB 0x61
+#define IT87_CIR_IRQ 0x70
+#define IT87_CIR_CONFIG 0xf0
+
+/* List of IT87_CIR registers: offset to BaseAddr */
+#define IT87_CIR_DR 0
+#define IT87_CIR_IER 1
+#define IT87_CIR_RCR 2
+#define IT87_CIR_TCR1 3
+#define IT87_CIR_TCR2 4
+#define IT87_CIR_TSR 5
+#define IT87_CIR_RSR 6
+#define IT87_CIR_BDLR 5
+#define IT87_CIR_BDHR 6
+#define IT87_CIR_IIR 7
+
+/* Bit Definition */
+/* IER: */
+#define IT87_CIR_IER_TM_EN 0x80
+#define IT87_CIR_IER_RESEVED 0x40
+#define IT87_CIR_IER_RESET 0x20
+#define IT87_CIR_IER_BR 0x10
+#define IT87_CIR_IER_IEC 0x8
+#define IT87_CIR_IER_RFOIE 0x4
+#define IT87_CIR_IER_RDAIE 0x2
+#define IT87_CIR_IER_TLDLIE 0x1
+
+/* RCR: */
+#define IT87_CIR_RCR_RDWOS 0x80
+#define IT87_CIR_RCR_HCFS 0x40
+#define IT87_CIR_RCR_RXEN 0x20
+#define IT87_CIR_RCR_RXEND 0x10
+#define IT87_CIR_RCR_RXACT 0x8
+#define IT87_CIR_RCR_RXDCR 0x7
+
+/* TCR1: */
+#define IT87_CIR_TCR1_FIFOCLR 0x80
+#define IT87_CIR_TCR1_ILE 0x40
+#define IT87_CIR_TCR1_FIFOTL 0x30
+#define IT87_CIR_TCR1_TXRLE 0x8
+#define IT87_CIR_TCR1_TXENDF 0x4
+#define IT87_CIR_TCR1_TXMPM 0x3
+
+/* TCR2: */
+#define IT87_CIR_TCR2_CFQ 0xf8
+#define IT87_CIR_TCR2_TXMPW 0x7
+
+/* TSR: */
+#define IT87_CIR_TSR_RESERVED 0xc0
+#define IT87_CIR_TSR_TXFBC 0x3f
+
+/* RSR: */
+#define IT87_CIR_RSR_RXFTO 0x80
+#define IT87_CIR_RSR_RESERVED 0x40
+#define IT87_CIR_RSR_RXFBC 0x3f
+
+/* IIR: */
+#define IT87_CIR_IIR_RESERVED 0xf8
+#define IT87_CIR_IIR_IID 0x6
+#define IT87_CIR_IIR_IIP 0x1
+
+/* TM: */
+#define IT87_CIR_TM_IL_SEL 0x80
+#define IT87_CIR_TM_RESERVED 0x40
+#define IT87_CIR_TM_TM_REG 0x3f
+
+#define IT87_CIR_FIFO_SIZE 32
+
+/* Baudratedivisor for IT87: power of 2: only 1,2,4 or 8) */
+#define IT87_CIR_BAUDRATE_DIVISOR 0x1
+#define IT87_CIR_DEFAULT_IOBASE 0x310
+#define IT87_CIR_DEFAULT_IRQ 0x7
+#define IT87_CIR_SPACE 0x00
+#define IT87_CIR_PULSE 0xff
+#define IT87_CIR_FREQ_MIN 27
+#define IT87_CIR_FREQ_MAX 58
+#define TIME_CONST (IT87_CIR_BAUDRATE_DIVISOR * 8000000ul / 115200ul)
+
+/********************************* ITE IT87xx ************************/
diff --git a/drivers/staging/lirc/lirc_ite8709.c b/drivers/staging/lirc/lirc_ite8709.c
new file mode 100644
index 0000000..9352f45
--- /dev/null
+++ b/drivers/staging/lirc/lirc_ite8709.c
@@ -0,0 +1,542 @@
+/*
+ * LIRC driver for ITE8709 CIR port
+ *
+ * Copyright (C) 2008 Grégory Lardière <spmf2004-lirc@yahoo.fr>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+#define LIRC_DRIVER_NAME "lirc_ite8709"
+
+#define BUF_CHUNK_SIZE sizeof(int)
+#define BUF_SIZE (128*BUF_CHUNK_SIZE)
+
+/*
+ * The ITE8709 device seems to be the combination of IT8512 superIO chip and
+ * a specific firmware running on the IT8512's embedded micro-controller.
+ * In addition of the embedded micro-controller, the IT8512 chip contains a
+ * CIR module and several other modules. A few modules are directly accessible
+ * by the host CPU, but most of them are only accessible by the
+ * micro-controller. The CIR module is only accessible by the micro-controller.
+ * The battery-backed SRAM module is accessible by the host CPU and the
+ * micro-controller. So one of the MC's firmware role is to act as a bridge
+ * between the host CPU and the CIR module. The firmware implements a kind of
+ * communication protocol using the SRAM module as a shared memory. The IT8512
+ * specification is publicly available on ITE's web site, but the communication
+ * protocol is not, so it was reverse-engineered.
+ */
+
+/* ITE8709 Registers addresses and values (reverse-engineered) */
+#define ITE8709_MODE 0x1a
+#define ITE8709_REG_ADR 0x1b
+#define ITE8709_REG_VAL 0x1c
+#define ITE8709_IIR 0x1e /* Interrupt identification register */
+#define ITE8709_RFSR 0x1f /* Receiver FIFO status register */
+#define ITE8709_FIFO_START 0x20
+
+#define ITE8709_MODE_READY 0X00
+#define ITE8709_MODE_WRITE 0X01
+#define ITE8709_MODE_READ 0X02
+#define ITE8709_IIR_RDAI 0x02 /* Receiver data available interrupt */
+#define ITE8709_IIR_RFOI 0x04 /* Receiver FIFO overrun interrupt */
+#define ITE8709_RFSR_MASK 0x3f /* FIFO byte count mask */
+
+/*
+ * IT8512 CIR-module registers addresses and values
+ * (from IT8512 E/F specification v0.4.1)
+ */
+#define IT8512_REG_MSTCR 0x01 /* Master control register */
+#define IT8512_REG_IER 0x02 /* Interrupt enable register */
+#define IT8512_REG_CFR 0x04 /* Carrier frequency register */
+#define IT8512_REG_RCR 0x05 /* Receive control register */
+#define IT8512_REG_BDLR 0x08 /* Baud rate divisor low byte register */
+#define IT8512_REG_BDHR 0x09 /* Baud rate divisor high byte register */
+
+#define IT8512_MSTCR_RESET 0x01 /* Reset registers to default value */
+#define IT8512_MSTCR_FIFOCLR 0x02 /* Clear FIFO */
+#define IT8512_MSTCR_FIFOTL_7 0x04 /* FIFO threshold level : 7 */
+#define IT8512_MSTCR_FIFOTL_25 0x0c /* FIFO threshold level : 25 */
+#define IT8512_IER_RDAIE 0x02 /* Enable data interrupt request */
+#define IT8512_IER_RFOIE 0x04 /* Enable FIFO overrun interrupt req */
+#define IT8512_IER_IEC 0x80 /* Enable interrupt request */
+#define IT8512_CFR_CF_36KHZ 0x09 /* Carrier freq : low speed, 36kHz */
+#define IT8512_RCR_RXDCR_1 0x01 /* Demodulation carrier range : 1 */
+#define IT8512_RCR_RXACT 0x08 /* Receiver active */
+#define IT8512_RCR_RXEN 0x80 /* Receiver enable */
+#define IT8512_BDR_6 6 /* Baud rate divisor : 6 */
+
+/* Actual values used by this driver */
+#define CFG_FIFOTL IT8512_MSTCR_FIFOTL_25
+#define CFG_CR_FREQ IT8512_CFR_CF_36KHZ
+#define CFG_DCR IT8512_RCR_RXDCR_1
+#define CFG_BDR IT8512_BDR_6
+#define CFG_TIMEOUT 100000 /* Rearm interrupt when a space is > 100 ms */
+
+static int debug;
+
+struct ite8709_device {
+ int use_count;
+ int io;
+ int irq;
+ spinlock_t hardware_lock;
+ unsigned long long acc_pulse;
+ unsigned long long acc_space;
+ char lastbit;
+ struct timeval last_tv;
+ struct lirc_driver driver;
+ struct tasklet_struct tasklet;
+ char force_rearm;
+ char rearmed;
+ char device_busy;
+};
+
+#define dprintk(fmt, args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \
+ fmt, ## args); \
+ } while (0)
+
+
+static unsigned char ite8709_read(struct ite8709_device *dev,
+ unsigned char port)
+{
+ outb(port, dev->io);
+ return inb(dev->io+1);
+}
+
+static void ite8709_write(struct ite8709_device *dev, unsigned char port,
+ unsigned char data)
+{
+ outb(port, dev->io);
+ outb(data, dev->io+1);
+}
+
+static void ite8709_wait_device(struct ite8709_device *dev)
+{
+ int i = 0;
+ /*
+ * loop until device tells it's ready to continue
+ * iterations count is usually ~750 but can sometimes achieve 13000
+ */
+ for (i = 0; i < 15000; i++) {
+ udelay(2);
+ if (ite8709_read(dev, ITE8709_MODE) == ITE8709_MODE_READY)
+ break;
+ }
+}
+
+static void ite8709_write_register(struct ite8709_device *dev,
+ unsigned char reg_adr, unsigned char reg_value)
+{
+ ite8709_wait_device(dev);
+
+ ite8709_write(dev, ITE8709_REG_VAL, reg_value);
+ ite8709_write(dev, ITE8709_REG_ADR, reg_adr);
+ ite8709_write(dev, ITE8709_MODE, ITE8709_MODE_WRITE);
+}
+
+static void ite8709_init_hardware(struct ite8709_device *dev)
+{
+ spin_lock_irq(&dev->hardware_lock);
+ dev->device_busy = 1;
+ spin_unlock_irq(&dev->hardware_lock);
+
+ ite8709_write_register(dev, IT8512_REG_BDHR, (CFG_BDR >> 8) & 0xff);
+ ite8709_write_register(dev, IT8512_REG_BDLR, CFG_BDR & 0xff);
+ ite8709_write_register(dev, IT8512_REG_CFR, CFG_CR_FREQ);
+ ite8709_write_register(dev, IT8512_REG_IER,
+ IT8512_IER_IEC | IT8512_IER_RFOIE | IT8512_IER_RDAIE);
+ ite8709_write_register(dev, IT8512_REG_RCR, CFG_DCR);
+ ite8709_write_register(dev, IT8512_REG_MSTCR,
+ CFG_FIFOTL | IT8512_MSTCR_FIFOCLR);
+ ite8709_write_register(dev, IT8512_REG_RCR,
+ IT8512_RCR_RXEN | IT8512_RCR_RXACT | CFG_DCR);
+
+ spin_lock_irq(&dev->hardware_lock);
+ dev->device_busy = 0;
+ spin_unlock_irq(&dev->hardware_lock);
+
+ tasklet_enable(&dev->tasklet);
+}
+
+static void ite8709_drop_hardware(struct ite8709_device *dev)
+{
+ tasklet_disable(&dev->tasklet);
+
+ spin_lock_irq(&dev->hardware_lock);
+ dev->device_busy = 1;
+ spin_unlock_irq(&dev->hardware_lock);
+
+ ite8709_write_register(dev, IT8512_REG_RCR, 0);
+ ite8709_write_register(dev, IT8512_REG_MSTCR,
+ IT8512_MSTCR_RESET | IT8512_MSTCR_FIFOCLR);
+
+ spin_lock_irq(&dev->hardware_lock);
+ dev->device_busy = 0;
+ spin_unlock_irq(&dev->hardware_lock);
+}
+
+static int ite8709_set_use_inc(void *data)
+{
+ struct ite8709_device *dev;
+ dev = data;
+ if (dev->use_count == 0)
+ ite8709_init_hardware(dev);
+ dev->use_count++;
+ return 0;
+}
+
+static void ite8709_set_use_dec(void *data)
+{
+ struct ite8709_device *dev;
+ dev = data;
+ dev->use_count--;
+ if (dev->use_count == 0)
+ ite8709_drop_hardware(dev);
+}
+
+static void ite8709_add_read_queue(struct ite8709_device *dev, int flag,
+ unsigned long long val)
+{
+ int value;
+
+ dprintk("add a %llu usec %s\n", val, flag ? "pulse" : "space");
+
+ value = (val > PULSE_MASK) ? PULSE_MASK : val;
+ if (flag)
+ value |= PULSE_BIT;
+
+ if (!lirc_buffer_full(dev->driver.rbuf)) {
+ lirc_buffer_write(dev->driver.rbuf, (void *) &value);
+ wake_up(&dev->driver.rbuf->wait_poll);
+ }
+}
+
+static irqreturn_t ite8709_interrupt(int irq, void *dev_id)
+{
+ unsigned char data;
+ int iir, rfsr, i;
+ int fifo = 0;
+ char bit;
+ struct timeval curr_tv;
+
+ /* Bit duration in microseconds */
+ const unsigned long bit_duration = 1000000ul / (115200 / CFG_BDR);
+
+ struct ite8709_device *dev;
+ dev = dev_id;
+
+ /*
+ * If device is busy, we simply discard data because we are in one of
+ * these two cases : shutting down or rearming the device, so this
+ * doesn't really matter and this avoids waiting too long in IRQ ctx
+ */
+ spin_lock(&dev->hardware_lock);
+ if (dev->device_busy) {
+ spin_unlock(&dev->hardware_lock);
+ return IRQ_RETVAL(IRQ_HANDLED);
+ }
+
+ iir = ite8709_read(dev, ITE8709_IIR);
+
+ switch (iir) {
+ case ITE8709_IIR_RFOI:
+ dprintk("fifo overrun, scheduling forced rearm just in case\n");
+ dev->force_rearm = 1;
+ tasklet_schedule(&dev->tasklet);
+ spin_unlock(&dev->hardware_lock);
+ return IRQ_RETVAL(IRQ_HANDLED);
+
+ case ITE8709_IIR_RDAI:
+ rfsr = ite8709_read(dev, ITE8709_RFSR);
+ fifo = rfsr & ITE8709_RFSR_MASK;
+ if (fifo > 32)
+ fifo = 32;
+ dprintk("iir: 0x%x rfsr: 0x%x fifo: %d\n", iir, rfsr, fifo);
+
+ if (dev->rearmed) {
+ do_gettimeofday(&curr_tv);
+ dev->acc_space += 1000000ull
+ * (curr_tv.tv_sec - dev->last_tv.tv_sec)
+ + (curr_tv.tv_usec - dev->last_tv.tv_usec);
+ dev->rearmed = 0;
+ }
+ for (i = 0; i < fifo; i++) {
+ data = ite8709_read(dev, i+ITE8709_FIFO_START);
+ data = ~data;
+ /* Loop through */
+ for (bit = 0; bit < 8; ++bit) {
+ if ((data >> bit) & 1) {
+ dev->acc_pulse += bit_duration;
+ if (dev->lastbit == 0) {
+ ite8709_add_read_queue(dev, 0,
+ dev->acc_space);
+ dev->acc_space = 0;
+ }
+ } else {
+ dev->acc_space += bit_duration;
+ if (dev->lastbit == 1) {
+ ite8709_add_read_queue(dev, 1,
+ dev->acc_pulse);
+ dev->acc_pulse = 0;
+ }
+ }
+ dev->lastbit = (data >> bit) & 1;
+ }
+ }
+ ite8709_write(dev, ITE8709_RFSR, 0);
+
+ if (dev->acc_space > CFG_TIMEOUT) {
+ dprintk("scheduling rearm IRQ\n");
+ do_gettimeofday(&dev->last_tv);
+ dev->force_rearm = 0;
+ tasklet_schedule(&dev->tasklet);
+ }
+
+ spin_unlock(&dev->hardware_lock);
+ return IRQ_RETVAL(IRQ_HANDLED);
+
+ default:
+ /* not our irq */
+ dprintk("unknown IRQ (shouldn't happen) !!\n");
+ spin_unlock(&dev->hardware_lock);
+ return IRQ_RETVAL(IRQ_NONE);
+ }
+}
+
+static void ite8709_rearm_irq(unsigned long data)
+{
+ struct ite8709_device *dev;
+ unsigned long flags;
+ dev = (struct ite8709_device *) data;
+
+ spin_lock_irqsave(&dev->hardware_lock, flags);
+ dev->device_busy = 1;
+ spin_unlock_irqrestore(&dev->hardware_lock, flags);
+
+ if (dev->force_rearm || dev->acc_space > CFG_TIMEOUT) {
+ dprintk("rearming IRQ\n");
+ ite8709_write_register(dev, IT8512_REG_RCR,
+ IT8512_RCR_RXACT | CFG_DCR);
+ ite8709_write_register(dev, IT8512_REG_MSTCR,
+ CFG_FIFOTL | IT8512_MSTCR_FIFOCLR);
+ ite8709_write_register(dev, IT8512_REG_RCR,
+ IT8512_RCR_RXEN | IT8512_RCR_RXACT | CFG_DCR);
+ if (!dev->force_rearm)
+ dev->rearmed = 1;
+ dev->force_rearm = 0;
+ }
+
+ spin_lock_irqsave(&dev->hardware_lock, flags);
+ dev->device_busy = 0;
+ spin_unlock_irqrestore(&dev->hardware_lock, flags);
+}
+
+static int ite8709_cleanup(struct ite8709_device *dev, int stage, int errno,
+ char *msg)
+{
+ if (msg != NULL)
+ printk(KERN_ERR LIRC_DRIVER_NAME ": %s\n", msg);
+
+ switch (stage) {
+ case 6:
+ if (dev->use_count > 0)
+ ite8709_drop_hardware(dev);
+ case 5:
+ free_irq(dev->irq, dev);
+ case 4:
+ release_region(dev->io, 2);
+ case 3:
+ lirc_unregister_driver(dev->driver.minor);
+ case 2:
+ lirc_buffer_free(dev->driver.rbuf);
+ kfree(dev->driver.rbuf);
+ case 1:
+ kfree(dev);
+ case 0:
+ ;
+ }
+
+ return errno;
+}
+
+static int __devinit ite8709_pnp_probe(struct pnp_dev *dev,
+ const struct pnp_device_id *dev_id)
+{
+ struct lirc_driver *driver;
+ struct ite8709_device *ite8709_dev;
+ int ret;
+
+ /* Check resources validity */
+ if (!pnp_irq_valid(dev, 0))
+ return ite8709_cleanup(NULL, 0, -ENODEV, "invalid IRQ");
+ if (!pnp_port_valid(dev, 2))
+ return ite8709_cleanup(NULL, 0, -ENODEV, "invalid IO port");
+
+ /* Allocate memory for device struct */
+ ite8709_dev = kzalloc(sizeof(struct ite8709_device), GFP_KERNEL);
+ if (ite8709_dev == NULL)
+ return ite8709_cleanup(NULL, 0, -ENOMEM, "kzalloc failed");
+ pnp_set_drvdata(dev, ite8709_dev);
+
+ /* Initialize device struct */
+ ite8709_dev->use_count = 0;
+ ite8709_dev->irq = pnp_irq(dev, 0);
+ ite8709_dev->io = pnp_port_start(dev, 2);
+ ite8709_dev->hardware_lock =
+ __SPIN_LOCK_UNLOCKED(ite8709_dev->hardware_lock);
+ ite8709_dev->acc_pulse = 0;
+ ite8709_dev->acc_space = 0;
+ ite8709_dev->lastbit = 0;
+ do_gettimeofday(&ite8709_dev->last_tv);
+ tasklet_init(&ite8709_dev->tasklet, ite8709_rearm_irq,
+ (long) ite8709_dev);
+ ite8709_dev->force_rearm = 0;
+ ite8709_dev->rearmed = 0;
+ ite8709_dev->device_busy = 0;
+
+ /* Initialize driver struct */
+ driver = &ite8709_dev->driver;
+ strcpy(driver->name, LIRC_DRIVER_NAME);
+ driver->minor = -1;
+ driver->code_length = sizeof(int) * 8;
+ driver->sample_rate = 0;
+ driver->features = LIRC_CAN_REC_MODE2;
+ driver->data = ite8709_dev;
+ driver->add_to_buf = NULL;
+ driver->set_use_inc = ite8709_set_use_inc;
+ driver->set_use_dec = ite8709_set_use_dec;
+ driver->dev = &dev->dev;
+ driver->owner = THIS_MODULE;
+
+ /* Initialize LIRC buffer */
+ driver->rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+ if (!driver->rbuf)
+ return ite8709_cleanup(ite8709_dev, 1, -ENOMEM,
+ "can't allocate lirc_buffer");
+ if (lirc_buffer_init(driver->rbuf, BUF_CHUNK_SIZE, BUF_SIZE))
+ return ite8709_cleanup(ite8709_dev, 1, -ENOMEM,
+ "lirc_buffer_init() failed");
+
+ /* Register LIRC driver */
+ ret = lirc_register_driver(driver);
+ if (ret < 0)
+ return ite8709_cleanup(ite8709_dev, 2, ret,
+ "lirc_register_driver() failed");
+
+ /* Reserve I/O port access */
+ if (!request_region(ite8709_dev->io, 2, LIRC_DRIVER_NAME))
+ return ite8709_cleanup(ite8709_dev, 3, -EBUSY,
+ "i/o port already in use");
+
+ /* Reserve IRQ line */
+ ret = request_irq(ite8709_dev->irq, ite8709_interrupt, 0,
+ LIRC_DRIVER_NAME, ite8709_dev);
+ if (ret < 0)
+ return ite8709_cleanup(ite8709_dev, 4, ret,
+ "IRQ already in use");
+
+ /* Initialize hardware */
+ ite8709_drop_hardware(ite8709_dev); /* Shutdown hw until first use */
+
+ printk(KERN_INFO LIRC_DRIVER_NAME ": device found : irq=%d io=0x%x\n",
+ ite8709_dev->irq, ite8709_dev->io);
+
+ return 0;
+}
+
+static void __devexit ite8709_pnp_remove(struct pnp_dev *dev)
+{
+ struct ite8709_device *ite8709_dev;
+ ite8709_dev = pnp_get_drvdata(dev);
+
+ ite8709_cleanup(ite8709_dev, 6, 0, NULL);
+
+ printk(KERN_INFO LIRC_DRIVER_NAME ": device removed\n");
+}
+
+#ifdef CONFIG_PM
+static int ite8709_pnp_suspend(struct pnp_dev *dev, pm_message_t state)
+{
+ struct ite8709_device *ite8709_dev;
+ ite8709_dev = pnp_get_drvdata(dev);
+
+ if (ite8709_dev->use_count > 0)
+ ite8709_drop_hardware(ite8709_dev);
+
+ return 0;
+}
+
+static int ite8709_pnp_resume(struct pnp_dev *dev)
+{
+ struct ite8709_device *ite8709_dev;
+ ite8709_dev = pnp_get_drvdata(dev);
+
+ if (ite8709_dev->use_count > 0)
+ ite8709_init_hardware(ite8709_dev);
+
+ return 0;
+}
+#else
+#define ite8709_pnp_suspend NULL
+#define ite8709_pnp_resume NULL
+#endif
+
+static const struct pnp_device_id pnp_dev_table[] = {
+ {"ITE8709", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
+
+static struct pnp_driver ite8709_pnp_driver = {
+ .name = LIRC_DRIVER_NAME,
+ .probe = ite8709_pnp_probe,
+ .remove = __devexit_p(ite8709_pnp_remove),
+ .suspend = ite8709_pnp_suspend,
+ .resume = ite8709_pnp_resume,
+ .id_table = pnp_dev_table,
+};
+
+static int __init ite8709_init_module(void)
+{
+ return pnp_register_driver(&ite8709_pnp_driver);
+}
+module_init(ite8709_init_module);
+
+static void __exit ite8709_cleanup_module(void)
+{
+ pnp_unregister_driver(&ite8709_pnp_driver);
+}
+module_exit(ite8709_cleanup_module);
+
+MODULE_DESCRIPTION("LIRC driver for ITE8709 CIR port");
+MODULE_AUTHOR("Grégory Lardière");
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/staging/lirc/lirc_parallel.c b/drivers/staging/lirc/lirc_parallel.c
new file mode 100644
index 0000000..6da4a8c
--- /dev/null
+++ b/drivers/staging/lirc/lirc_parallel.c
@@ -0,0 +1,705 @@
+/*
+ * lirc_parallel.c
+ *
+ * lirc_parallel - device driver for infra-red signal receiving and
+ * transmitting unit built by the author
+ *
+ * Copyright (C) 1998 Christoph Bartelmus <lirc@bartelmus.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/*** Includes ***/
+
+#ifdef CONFIG_SMP
+#error "--- Sorry, this driver is not SMP safe. ---"
+#endif
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/time.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+
+#include <linux/io.h>
+#include <linux/signal.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+#include <asm/div64.h>
+
+#include <linux/poll.h>
+#include <linux/parport.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+#include "lirc_parallel.h"
+
+#define LIRC_DRIVER_NAME "lirc_parallel"
+
+#ifndef LIRC_IRQ
+#define LIRC_IRQ 7
+#endif
+#ifndef LIRC_PORT
+#define LIRC_PORT 0x378
+#endif
+#ifndef LIRC_TIMER
+#define LIRC_TIMER 65536
+#endif
+
+/*** Global Variables ***/
+
+static int debug;
+static int check_pselecd;
+
+unsigned int irq = LIRC_IRQ;
+unsigned int io = LIRC_PORT;
+#ifdef LIRC_TIMER
+unsigned int timer;
+unsigned int default_timer = LIRC_TIMER;
+#endif
+
+#define RBUF_SIZE (256) /* this must be a power of 2 larger than 1 */
+
+static int rbuf[RBUF_SIZE];
+
+DECLARE_WAIT_QUEUE_HEAD(lirc_wait);
+
+unsigned int rptr;
+unsigned int wptr;
+unsigned int lost_irqs;
+int is_open;
+
+struct parport *pport;
+struct pardevice *ppdevice;
+int is_claimed;
+
+unsigned int tx_mask = 1;
+
+/*** Internal Functions ***/
+
+static unsigned int in(int offset)
+{
+ switch (offset) {
+ case LIRC_LP_BASE:
+ return parport_read_data(pport);
+ case LIRC_LP_STATUS:
+ return parport_read_status(pport);
+ case LIRC_LP_CONTROL:
+ return parport_read_control(pport);
+ }
+ return 0; /* make compiler happy */
+}
+
+static void out(int offset, int value)
+{
+ switch (offset) {
+ case LIRC_LP_BASE:
+ parport_write_data(pport, value);
+ break;
+ case LIRC_LP_CONTROL:
+ parport_write_control(pport, value);
+ break;
+ case LIRC_LP_STATUS:
+ printk(KERN_INFO "%s: attempt to write to status register\n",
+ LIRC_DRIVER_NAME);
+ break;
+ }
+}
+
+static unsigned int lirc_get_timer(void)
+{
+ return in(LIRC_PORT_TIMER) & LIRC_PORT_TIMER_BIT;
+}
+
+static unsigned int lirc_get_signal(void)
+{
+ return in(LIRC_PORT_SIGNAL) & LIRC_PORT_SIGNAL_BIT;
+}
+
+static void lirc_on(void)
+{
+ out(LIRC_PORT_DATA, tx_mask);
+}
+
+static void lirc_off(void)
+{
+ out(LIRC_PORT_DATA, 0);
+}
+
+static unsigned int init_lirc_timer(void)
+{
+ struct timeval tv, now;
+ unsigned int level, newlevel, timeelapsed, newtimer;
+ int count = 0;
+
+ do_gettimeofday(&tv);
+ tv.tv_sec++; /* wait max. 1 sec. */
+ level = lirc_get_timer();
+ do {
+ newlevel = lirc_get_timer();
+ if (level == 0 && newlevel != 0)
+ count++;
+ level = newlevel;
+ do_gettimeofday(&now);
+ } while (count < 1000 && (now.tv_sec < tv.tv_sec
+ || (now.tv_sec == tv.tv_sec
+ && now.tv_usec < tv.tv_usec)));
+
+ timeelapsed = ((now.tv_sec + 1 - tv.tv_sec)*1000000
+ + (now.tv_usec - tv.tv_usec));
+ if (count >= 1000 && timeelapsed > 0) {
+ if (default_timer == 0) {
+ /* autodetect timer */
+ newtimer = (1000000*count)/timeelapsed;
+ printk(KERN_INFO "%s: %u Hz timer detected\n",
+ LIRC_DRIVER_NAME, newtimer);
+ return newtimer;
+ } else {
+ newtimer = (1000000*count)/timeelapsed;
+ if (abs(newtimer - default_timer) > default_timer/10) {
+ /* bad timer */
+ printk(KERN_NOTICE "%s: bad timer: %u Hz\n",
+ LIRC_DRIVER_NAME, newtimer);
+ printk(KERN_NOTICE "%s: using default timer: "
+ "%u Hz\n",
+ LIRC_DRIVER_NAME, default_timer);
+ return default_timer;
+ } else {
+ printk(KERN_INFO "%s: %u Hz timer detected\n",
+ LIRC_DRIVER_NAME, newtimer);
+ return newtimer; /* use detected value */
+ }
+ }
+ } else {
+ printk(KERN_NOTICE "%s: no timer detected\n", LIRC_DRIVER_NAME);
+ return 0;
+ }
+}
+
+static int lirc_claim(void)
+{
+ if (parport_claim(ppdevice) != 0) {
+ printk(KERN_WARNING "%s: could not claim port\n",
+ LIRC_DRIVER_NAME);
+ printk(KERN_WARNING "%s: waiting for port becoming available"
+ "\n", LIRC_DRIVER_NAME);
+ if (parport_claim_or_block(ppdevice) < 0) {
+ printk(KERN_NOTICE "%s: could not claim port, giving"
+ " up\n", LIRC_DRIVER_NAME);
+ return 0;
+ }
+ }
+ out(LIRC_LP_CONTROL, LP_PSELECP|LP_PINITP);
+ is_claimed = 1;
+ return 1;
+}
+
+/*** interrupt handler ***/
+
+static void rbuf_write(int signal)
+{
+ unsigned int nwptr;
+
+ nwptr = (wptr + 1) & (RBUF_SIZE - 1);
+ if (nwptr == rptr) {
+ /* no new signals will be accepted */
+ lost_irqs++;
+ printk(KERN_NOTICE "%s: buffer overrun\n", LIRC_DRIVER_NAME);
+ return;
+ }
+ rbuf[wptr] = signal;
+ wptr = nwptr;
+}
+
+static void irq_handler(void *blah)
+{
+ struct timeval tv;
+ static struct timeval lasttv;
+ static int init;
+ long signal;
+ int data;
+ unsigned int level, newlevel;
+ unsigned int timeout;
+
+ if (!is_open)
+ return;
+
+ if (!is_claimed)
+ return;
+
+#if 0
+ /* disable interrupt */
+ disable_irq(irq);
+ out(LIRC_PORT_IRQ, in(LIRC_PORT_IRQ) & (~LP_PINTEN));
+#endif
+ if (check_pselecd && (in(1) & LP_PSELECD))
+ return;
+
+#ifdef LIRC_TIMER
+ if (init) {
+ do_gettimeofday(&tv);
+
+ signal = tv.tv_sec - lasttv.tv_sec;
+ if (signal > 15)
+ /* really long time */
+ data = PULSE_MASK;
+ else
+ data = (int) (signal*1000000 +
+ tv.tv_usec - lasttv.tv_usec +
+ LIRC_SFH506_DELAY);
+
+ rbuf_write(data); /* space */
+ } else {
+ if (timer == 0) {
+ /*
+ * wake up; we'll lose this signal, but it will be
+ * garbage if the device is turned on anyway
+ */
+ timer = init_lirc_timer();
+ /* enable_irq(irq); */
+ return;
+ }
+ init = 1;
+ }
+
+ timeout = timer/10; /* timeout after 1/10 sec. */
+ signal = 1;
+ level = lirc_get_timer();
+ do {
+ newlevel = lirc_get_timer();
+ if (level == 0 && newlevel != 0)
+ signal++;
+ level = newlevel;
+
+ /* giving up */
+ if (signal > timeout
+ || (check_pselecd && (in(1) & LP_PSELECD))) {
+ signal = 0;
+ printk(KERN_NOTICE "%s: timeout\n", LIRC_DRIVER_NAME);
+ break;
+ }
+ } while (lirc_get_signal());
+
+ if (signal != 0) {
+ /* ajust value to usecs */
+ unsigned long long helper;
+
+ helper = ((unsigned long long) signal)*1000000;
+ do_div(helper, timer);
+ signal = (long) helper;
+
+ if (signal > LIRC_SFH506_DELAY)
+ data = signal - LIRC_SFH506_DELAY;
+ else
+ data = 1;
+ rbuf_write(PULSE_BIT|data); /* pulse */
+ }
+ do_gettimeofday(&lasttv);
+#else
+ /* add your code here */
+#endif
+
+ wake_up_interruptible(&lirc_wait);
+
+ /* enable interrupt */
+ /*
+ enable_irq(irq);
+ out(LIRC_PORT_IRQ, in(LIRC_PORT_IRQ)|LP_PINTEN);
+ */
+}
+
+/*** file operations ***/
+
+static loff_t lirc_lseek(struct file *filep, loff_t offset, int orig)
+{
+ return -ESPIPE;
+}
+
+static ssize_t lirc_read(struct file *filep, char *buf, size_t n, loff_t *ppos)
+{
+ int result = 0;
+ int count = 0;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (n % sizeof(int))
+ return -EINVAL;
+
+ add_wait_queue(&lirc_wait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ while (count < n) {
+ if (rptr != wptr) {
+ if (copy_to_user(buf+count, (char *) &rbuf[rptr],
+ sizeof(int))) {
+ result = -EFAULT;
+ break;
+ }
+ rptr = (rptr + 1) & (RBUF_SIZE - 1);
+ count += sizeof(int);
+ } else {
+ if (filep->f_flags & O_NONBLOCK) {
+ result = -EAGAIN;
+ break;
+ }
+ if (signal_pending(current)) {
+ result = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
+ }
+ }
+ remove_wait_queue(&lirc_wait, &wait);
+ set_current_state(TASK_RUNNING);
+ return count ? count : result;
+}
+
+static ssize_t lirc_write(struct file *filep, const char *buf, size_t n,
+ loff_t *ppos)
+{
+ int count;
+ unsigned int i;
+ unsigned int level, newlevel;
+ unsigned long flags;
+ int counttimer;
+ int *wbuf;
+
+ if (!is_claimed)
+ return -EBUSY;
+
+ count = n / sizeof(int);
+
+ if (n % sizeof(int) || count % 2 == 0)
+ return -EINVAL;
+
+ wbuf = memdup_user(buf, n);
+ if (IS_ERR(wbuf))
+ return PTR_ERR(wbuf);
+
+#ifdef LIRC_TIMER
+ if (timer == 0) {
+ /* try again if device is ready */
+ timer = init_lirc_timer();
+ if (timer == 0)
+ return -EIO;
+ }
+
+ /* adjust values from usecs */
+ for (i = 0; i < count; i++) {
+ unsigned long long helper;
+
+ helper = ((unsigned long long) wbuf[i])*timer;
+ do_div(helper, 1000000);
+ wbuf[i] = (int) helper;
+ }
+
+ local_irq_save(flags);
+ i = 0;
+ while (i < count) {
+ level = lirc_get_timer();
+ counttimer = 0;
+ lirc_on();
+ do {
+ newlevel = lirc_get_timer();
+ if (level == 0 && newlevel != 0)
+ counttimer++;
+ level = newlevel;
+ if (check_pselecd && (in(1) & LP_PSELECD)) {
+ lirc_off();
+ local_irq_restore(flags);
+ return -EIO;
+ }
+ } while (counttimer < wbuf[i]);
+ i++;
+
+ lirc_off();
+ if (i == count)
+ break;
+ counttimer = 0;
+ do {
+ newlevel = lirc_get_timer();
+ if (level == 0 && newlevel != 0)
+ counttimer++;
+ level = newlevel;
+ if (check_pselecd && (in(1) & LP_PSELECD)) {
+ local_irq_restore(flags);
+ return -EIO;
+ }
+ } while (counttimer < wbuf[i]);
+ i++;
+ }
+ local_irq_restore(flags);
+#else
+ /* place code that handles write without external timer here */
+#endif
+ return n;
+}
+
+static unsigned int lirc_poll(struct file *file, poll_table *wait)
+{
+ poll_wait(file, &lirc_wait, wait);
+ if (rptr != wptr)
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+ int result;
+ unsigned long features = LIRC_CAN_SET_TRANSMITTER_MASK |
+ LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2;
+ unsigned long mode;
+ unsigned int ivalue;
+
+ switch (cmd) {
+ case LIRC_GET_FEATURES:
+ result = put_user(features, (unsigned long *) arg);
+ if (result)
+ return result;
+ break;
+ case LIRC_GET_SEND_MODE:
+ result = put_user(LIRC_MODE_PULSE, (unsigned long *) arg);
+ if (result)
+ return result;
+ break;
+ case LIRC_GET_REC_MODE:
+ result = put_user(LIRC_MODE_MODE2, (unsigned long *) arg);
+ if (result)
+ return result;
+ break;
+ case LIRC_SET_SEND_MODE:
+ result = get_user(mode, (unsigned long *) arg);
+ if (result)
+ return result;
+ if (mode != LIRC_MODE_PULSE)
+ return -EINVAL;
+ break;
+ case LIRC_SET_REC_MODE:
+ result = get_user(mode, (unsigned long *) arg);
+ if (result)
+ return result;
+ if (mode != LIRC_MODE_MODE2)
+ return -ENOSYS;
+ break;
+ case LIRC_SET_TRANSMITTER_MASK:
+ result = get_user(ivalue, (unsigned int *) arg);
+ if (result)
+ return result;
+ if ((ivalue & LIRC_PARALLEL_TRANSMITTER_MASK) != ivalue)
+ return LIRC_PARALLEL_MAX_TRANSMITTERS;
+ tx_mask = ivalue;
+ break;
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static int lirc_open(struct inode *node, struct file *filep)
+{
+ if (is_open || !lirc_claim())
+ return -EBUSY;
+
+ parport_enable_irq(pport);
+
+ /* init read ptr */
+ rptr = 0;
+ wptr = 0;
+ lost_irqs = 0;
+
+ is_open = 1;
+ return 0;
+}
+
+static int lirc_close(struct inode *node, struct file *filep)
+{
+ if (is_claimed) {
+ is_claimed = 0;
+ parport_release(ppdevice);
+ }
+ is_open = 0;
+ return 0;
+}
+
+static const struct file_operations lirc_fops = {
+ .owner = THIS_MODULE,
+ .llseek = lirc_lseek,
+ .read = lirc_read,
+ .write = lirc_write,
+ .poll = lirc_poll,
+ .unlocked_ioctl = lirc_ioctl,
+ .open = lirc_open,
+ .release = lirc_close
+};
+
+static int set_use_inc(void *data)
+{
+ return 0;
+}
+
+static void set_use_dec(void *data)
+{
+}
+
+static struct lirc_driver driver = {
+ .name = LIRC_DRIVER_NAME,
+ .minor = -1,
+ .code_length = 1,
+ .sample_rate = 0,
+ .data = NULL,
+ .add_to_buf = NULL,
+ .set_use_inc = set_use_inc,
+ .set_use_dec = set_use_dec,
+ .fops = &lirc_fops,
+ .dev = NULL,
+ .owner = THIS_MODULE,
+};
+
+static int pf(void *handle);
+static void kf(void *handle);
+
+static struct timer_list poll_timer;
+static void poll_state(unsigned long ignored);
+
+static void poll_state(unsigned long ignored)
+{
+ printk(KERN_NOTICE "%s: time\n",
+ LIRC_DRIVER_NAME);
+ del_timer(&poll_timer);
+ if (is_claimed)
+ return;
+ kf(NULL);
+ if (!is_claimed) {
+ printk(KERN_NOTICE "%s: could not claim port, giving up\n",
+ LIRC_DRIVER_NAME);
+ init_timer(&poll_timer);
+ poll_timer.expires = jiffies + HZ;
+ poll_timer.data = (unsigned long)current;
+ poll_timer.function = poll_state;
+ add_timer(&poll_timer);
+ }
+}
+
+static int pf(void *handle)
+{
+ parport_disable_irq(pport);
+ is_claimed = 0;
+ return 0;
+}
+
+static void kf(void *handle)
+{
+ if (!is_open)
+ return;
+ if (!lirc_claim())
+ return;
+ parport_enable_irq(pport);
+ lirc_off();
+ /* this is a bit annoying when you actually print...*/
+ /*
+ printk(KERN_INFO "%s: reclaimed port\n", LIRC_DRIVER_NAME);
+ */
+}
+
+/*** module initialization and cleanup ***/
+
+static int __init lirc_parallel_init(void)
+{
+ pport = parport_find_base(io);
+ if (pport == NULL) {
+ printk(KERN_NOTICE "%s: no port at %x found\n",
+ LIRC_DRIVER_NAME, io);
+ return -ENXIO;
+ }
+ ppdevice = parport_register_device(pport, LIRC_DRIVER_NAME,
+ pf, kf, irq_handler, 0, NULL);
+ parport_put_port(pport);
+ if (ppdevice == NULL) {
+ printk(KERN_NOTICE "%s: parport_register_device() failed\n",
+ LIRC_DRIVER_NAME);
+ return -ENXIO;
+ }
+ if (parport_claim(ppdevice) != 0)
+ goto skip_init;
+ is_claimed = 1;
+ out(LIRC_LP_CONTROL, LP_PSELECP|LP_PINITP);
+
+#ifdef LIRC_TIMER
+ if (debug)
+ out(LIRC_PORT_DATA, tx_mask);
+
+ timer = init_lirc_timer();
+
+#if 0 /* continue even if device is offline */
+ if (timer == 0) {
+ is_claimed = 0;
+ parport_release(pport);
+ parport_unregister_device(ppdevice);
+ return -EIO;
+ }
+
+#endif
+ if (debug)
+ out(LIRC_PORT_DATA, 0);
+#endif
+
+ is_claimed = 0;
+ parport_release(ppdevice);
+ skip_init:
+ driver.minor = lirc_register_driver(&driver);
+ if (driver.minor < 0) {
+ printk(KERN_NOTICE "%s: register_chrdev() failed\n",
+ LIRC_DRIVER_NAME);
+ parport_unregister_device(ppdevice);
+ return -EIO;
+ }
+ printk(KERN_INFO "%s: installed using port 0x%04x irq %d\n",
+ LIRC_DRIVER_NAME, io, irq);
+ return 0;
+}
+
+static void __exit lirc_parallel_exit(void)
+{
+ parport_unregister_device(ppdevice);
+ lirc_unregister_driver(driver.minor);
+}
+
+module_init(lirc_parallel_init);
+module_exit(lirc_parallel_exit);
+
+MODULE_DESCRIPTION("Infrared receiver driver for parallel ports.");
+MODULE_AUTHOR("Christoph Bartelmus");
+MODULE_LICENSE("GPL");
+
+module_param(io, int, S_IRUGO);
+MODULE_PARM_DESC(io, "I/O address base (0x3bc, 0x378 or 0x278)");
+
+module_param(irq, int, S_IRUGO);
+MODULE_PARM_DESC(irq, "Interrupt (7 or 5)");
+
+module_param(tx_mask, int, S_IRUGO);
+MODULE_PARM_DESC(tx_maxk, "Transmitter mask (default: 0x01)");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
+
+module_param(check_pselecd, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Check for printer (default: 0)");
diff --git a/drivers/staging/lirc/lirc_parallel.h b/drivers/staging/lirc/lirc_parallel.h
new file mode 100644
index 0000000..4bed6af
--- /dev/null
+++ b/drivers/staging/lirc/lirc_parallel.h
@@ -0,0 +1,26 @@
+/* lirc_parallel.h */
+
+#ifndef _LIRC_PARALLEL_H
+#define _LIRC_PARALLEL_H
+
+#include <linux/lp.h>
+
+#define LIRC_PORT_LEN 3
+
+#define LIRC_LP_BASE 0
+#define LIRC_LP_STATUS 1
+#define LIRC_LP_CONTROL 2
+
+#define LIRC_PORT_DATA LIRC_LP_BASE /* base */
+#define LIRC_PORT_TIMER LIRC_LP_STATUS /* status port */
+#define LIRC_PORT_TIMER_BIT LP_PBUSY /* busy signal */
+#define LIRC_PORT_SIGNAL LIRC_LP_STATUS /* status port */
+#define LIRC_PORT_SIGNAL_BIT LP_PACK /* ack signal */
+#define LIRC_PORT_IRQ LIRC_LP_CONTROL /* control port */
+
+#define LIRC_SFH506_DELAY 0 /* delay t_phl in usecs */
+
+#define LIRC_PARALLEL_MAX_TRANSMITTERS 8
+#define LIRC_PARALLEL_TRANSMITTER_MASK ((1<<LIRC_PARALLEL_MAX_TRANSMITTERS) - 1)
+
+#endif
diff --git a/drivers/staging/lirc/lirc_sasem.c b/drivers/staging/lirc/lirc_sasem.c
new file mode 100644
index 0000000..73166c3
--- /dev/null
+++ b/drivers/staging/lirc/lirc_sasem.c
@@ -0,0 +1,933 @@
+/*
+ * lirc_sasem.c - USB remote support for LIRC
+ * Version 0.5
+ *
+ * Copyright (C) 2004-2005 Oliver Stabel <oliver.stabel@gmx.de>
+ * Tim Davies <tim@opensystems.net.au>
+ *
+ * This driver was derived from:
+ * Venky Raju <dev@venky.ws>
+ * "lirc_imon - "LIRC/VFD driver for Ahanix/Soundgraph IMON IR/VFD"
+ * Paul Miller <pmiller9@users.sourceforge.net>'s 2003-2004
+ * "lirc_atiusb - USB remote support for LIRC"
+ * Culver Consulting Services <henry@culcon.com>'s 2003
+ * "Sasem OnAir VFD/IR USB driver"
+ *
+ *
+ * NOTE - The LCDproc iMon driver should work with this module. More info at
+ * http://www.frogstorm.info/sasem
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+
+#define MOD_AUTHOR "Oliver Stabel <oliver.stabel@gmx.de>, " \
+ "Tim Davies <tim@opensystems.net.au>"
+#define MOD_DESC "USB Driver for Sasem Remote Controller V1.1"
+#define MOD_NAME "lirc_sasem"
+#define MOD_VERSION "0.5"
+
+#define VFD_MINOR_BASE 144 /* Same as LCD */
+#define DEVICE_NAME "lcd%d"
+
+#define BUF_CHUNK_SIZE 8
+#define BUF_SIZE 128
+
+#define IOCTL_LCD_CONTRAST 1
+
+/*** P R O T O T Y P E S ***/
+
+/* USB Callback prototypes */
+static int sasem_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+static void sasem_disconnect(struct usb_interface *interface);
+static void usb_rx_callback(struct urb *urb);
+static void usb_tx_callback(struct urb *urb);
+
+/* VFD file_operations function prototypes */
+static int vfd_open(struct inode *inode, struct file *file);
+static long vfd_ioctl(struct file *file, unsigned cmd, unsigned long arg);
+static int vfd_close(struct inode *inode, struct file *file);
+static ssize_t vfd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos);
+
+/* LIRC driver function prototypes */
+static int ir_open(void *data);
+static void ir_close(void *data);
+
+/* Driver init/exit prototypes */
+static int __init sasem_init(void);
+static void __exit sasem_exit(void);
+
+/*** G L O B A L S ***/
+#define SASEM_DATA_BUF_SZ 32
+
+struct sasem_context {
+
+ struct usb_device *dev;
+ int vfd_isopen; /* VFD port has been opened */
+ unsigned int vfd_contrast; /* VFD contrast */
+ int ir_isopen; /* IR port has been opened */
+ int dev_present; /* USB device presence */
+ struct mutex ctx_lock; /* to lock this object */
+ wait_queue_head_t remove_ok; /* For unexpected USB disconnects */
+
+ struct lirc_driver *driver;
+ struct usb_endpoint_descriptor *rx_endpoint;
+ struct usb_endpoint_descriptor *tx_endpoint;
+ struct urb *rx_urb;
+ struct urb *tx_urb;
+ unsigned char usb_rx_buf[8];
+ unsigned char usb_tx_buf[8];
+
+ struct tx_t {
+ unsigned char data_buf[SASEM_DATA_BUF_SZ]; /* user data buffer */
+ struct completion finished; /* wait for write to finish */
+ atomic_t busy; /* write in progress */
+ int status; /* status of tx completion */
+ } tx;
+
+ /* for dealing with repeat codes (wish there was a toggle bit!) */
+ struct timeval presstime;
+ char lastcode[8];
+ int codesaved;
+};
+
+/* VFD file operations */
+static const struct file_operations vfd_fops = {
+ .owner = THIS_MODULE,
+ .open = &vfd_open,
+ .write = &vfd_write,
+ .unlocked_ioctl = &vfd_ioctl,
+ .release = &vfd_close,
+};
+
+/* USB Device ID for Sasem USB Control Board */
+static struct usb_device_id sasem_usb_id_table[] = {
+ /* Sasem USB Control Board */
+ { USB_DEVICE(0x11ba, 0x0101) },
+ /* Terminating entry */
+ {}
+};
+
+/* USB Device data */
+static struct usb_driver sasem_driver = {
+ .name = MOD_NAME,
+ .probe = sasem_probe,
+ .disconnect = sasem_disconnect,
+ .id_table = sasem_usb_id_table,
+};
+
+static struct usb_class_driver sasem_class = {
+ .name = DEVICE_NAME,
+ .fops = &vfd_fops,
+ .minor_base = VFD_MINOR_BASE,
+};
+
+/* to prevent races between open() and disconnect() */
+static DEFINE_MUTEX(disconnect_lock);
+
+static int debug;
+
+
+/*** M O D U L E C O D E ***/
+
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_LICENSE("GPL");
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)");
+
+static void delete_context(struct sasem_context *context)
+{
+ usb_free_urb(context->tx_urb); /* VFD */
+ usb_free_urb(context->rx_urb); /* IR */
+ lirc_buffer_free(context->driver->rbuf);
+ kfree(context->driver->rbuf);
+ kfree(context->driver);
+ kfree(context);
+
+ if (debug)
+ printk(KERN_INFO "%s: context deleted\n", __func__);
+}
+
+static void deregister_from_lirc(struct sasem_context *context)
+{
+ int retval;
+ int minor = context->driver->minor;
+
+ retval = lirc_unregister_driver(minor);
+ if (retval)
+ err("%s: unable to deregister from lirc (%d)",
+ __func__, retval);
+ else
+ printk(KERN_INFO "Deregistered Sasem driver (minor:%d)\n",
+ minor);
+
+}
+
+/**
+ * Called when the VFD device (e.g. /dev/usb/lcd)
+ * is opened by the application.
+ */
+static int vfd_open(struct inode *inode, struct file *file)
+{
+ struct usb_interface *interface;
+ struct sasem_context *context = NULL;
+ int subminor;
+ int retval = 0;
+
+ /* prevent races with disconnect */
+ mutex_lock(&disconnect_lock);
+
+ subminor = iminor(inode);
+ interface = usb_find_interface(&sasem_driver, subminor);
+ if (!interface) {
+ err("%s: could not find interface for minor %d",
+ __func__, subminor);
+ retval = -ENODEV;
+ goto exit;
+ }
+ context = usb_get_intfdata(interface);
+
+ if (!context) {
+ err("%s: no context found for minor %d",
+ __func__, subminor);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ mutex_lock(&context->ctx_lock);
+
+ if (context->vfd_isopen) {
+ err("%s: VFD port is already open", __func__);
+ retval = -EBUSY;
+ } else {
+ context->vfd_isopen = 1;
+ file->private_data = context;
+ printk(KERN_INFO "VFD port opened\n");
+ }
+
+ mutex_unlock(&context->ctx_lock);
+
+exit:
+ mutex_unlock(&disconnect_lock);
+ return retval;
+}
+
+/**
+ * Called when the VFD device (e.g. /dev/usb/lcd)
+ * is closed by the application.
+ */
+static long vfd_ioctl(struct file *file, unsigned cmd, unsigned long arg)
+{
+ struct sasem_context *context = NULL;
+
+ context = (struct sasem_context *) file->private_data;
+
+ if (!context) {
+ err("%s: no context for device", __func__);
+ return -ENODEV;
+ }
+
+ mutex_lock(&context->ctx_lock);
+
+ switch (cmd) {
+ case IOCTL_LCD_CONTRAST:
+ if (arg > 1000)
+ arg = 1000;
+ context->vfd_contrast = (unsigned int)arg;
+ break;
+ default:
+ printk(KERN_INFO "Unknown IOCTL command\n");
+ mutex_unlock(&context->ctx_lock);
+ return -ENOIOCTLCMD; /* not supported */
+ }
+
+ mutex_unlock(&context->ctx_lock);
+ return 0;
+}
+
+/**
+ * Called when the VFD device (e.g. /dev/usb/lcd)
+ * is closed by the application.
+ */
+static int vfd_close(struct inode *inode, struct file *file)
+{
+ struct sasem_context *context = NULL;
+ int retval = 0;
+
+ context = (struct sasem_context *) file->private_data;
+
+ if (!context) {
+ err("%s: no context for device", __func__);
+ return -ENODEV;
+ }
+
+ mutex_lock(&context->ctx_lock);
+
+ if (!context->vfd_isopen) {
+ err("%s: VFD is not open", __func__);
+ retval = -EIO;
+ } else {
+ context->vfd_isopen = 0;
+ printk(KERN_INFO "VFD port closed\n");
+ if (!context->dev_present && !context->ir_isopen) {
+
+ /* Device disconnected before close and IR port is
+ * not open. If IR port is open, context will be
+ * deleted by ir_close. */
+ mutex_unlock(&context->ctx_lock);
+ delete_context(context);
+ return retval;
+ }
+ }
+
+ mutex_unlock(&context->ctx_lock);
+ return retval;
+}
+
+/**
+ * Sends a packet to the VFD.
+ */
+static int send_packet(struct sasem_context *context)
+{
+ unsigned int pipe;
+ int interval = 0;
+ int retval = 0;
+
+ pipe = usb_sndintpipe(context->dev,
+ context->tx_endpoint->bEndpointAddress);
+ interval = context->tx_endpoint->bInterval;
+
+ usb_fill_int_urb(context->tx_urb, context->dev, pipe,
+ context->usb_tx_buf, sizeof(context->usb_tx_buf),
+ usb_tx_callback, context, interval);
+
+ context->tx_urb->actual_length = 0;
+
+ init_completion(&context->tx.finished);
+ atomic_set(&(context->tx.busy), 1);
+
+ retval = usb_submit_urb(context->tx_urb, GFP_KERNEL);
+ if (retval) {
+ atomic_set(&(context->tx.busy), 0);
+ err("%s: error submitting urb (%d)", __func__, retval);
+ } else {
+ /* Wait for transmission to complete (or abort) */
+ mutex_unlock(&context->ctx_lock);
+ wait_for_completion(&context->tx.finished);
+ mutex_lock(&context->ctx_lock);
+
+ retval = context->tx.status;
+ if (retval)
+ err("%s: packet tx failed (%d)", __func__, retval);
+ }
+
+ return retval;
+}
+
+/**
+ * Writes data to the VFD. The Sasem VFD is 2x16 characters
+ * and requires data in 9 consecutive USB interrupt packets,
+ * each packet carrying 8 bytes.
+ */
+static ssize_t vfd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos)
+{
+ int i;
+ int retval = 0;
+ struct sasem_context *context;
+ int *data_buf;
+
+ context = (struct sasem_context *) file->private_data;
+ if (!context) {
+ err("%s: no context for device", __func__);
+ return -ENODEV;
+ }
+
+ mutex_lock(&context->ctx_lock);
+
+ if (!context->dev_present) {
+ err("%s: no Sasem device present", __func__);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ if (n_bytes <= 0 || n_bytes > SASEM_DATA_BUF_SZ) {
+ err("%s: invalid payload size", __func__);
+ retval = -EINVAL;
+ goto exit;
+ }
+
+ data_buf = memdup_user(buf, n_bytes);
+ if (PTR_ERR(data_buf))
+ return PTR_ERR(data_buf);
+
+ memcpy(context->tx.data_buf, data_buf, n_bytes);
+
+ /* Pad with spaces */
+ for (i = n_bytes; i < SASEM_DATA_BUF_SZ; ++i)
+ context->tx.data_buf[i] = ' ';
+
+ /* Nine 8 byte packets to be sent */
+ /* NOTE: "\x07\x01\0\0\0\0\0\0" or "\x0c\0\0\0\0\0\0\0"
+ * will clear the VFD */
+ for (i = 0; i < 9; i++) {
+ switch (i) {
+ case 0:
+ memcpy(context->usb_tx_buf, "\x07\0\0\0\0\0\0\0", 8);
+ context->usb_tx_buf[1] = (context->vfd_contrast) ?
+ (0x2B - (context->vfd_contrast - 1) / 250)
+ : 0x2B;
+ break;
+ case 1:
+ memcpy(context->usb_tx_buf, "\x09\x01\0\0\0\0\0\0", 8);
+ break;
+ case 2:
+ memcpy(context->usb_tx_buf, "\x0b\x01\0\0\0\0\0\0", 8);
+ break;
+ case 3:
+ memcpy(context->usb_tx_buf, context->tx.data_buf, 8);
+ break;
+ case 4:
+ memcpy(context->usb_tx_buf,
+ context->tx.data_buf + 8, 8);
+ break;
+ case 5:
+ memcpy(context->usb_tx_buf, "\x09\x01\0\0\0\0\0\0", 8);
+ break;
+ case 6:
+ memcpy(context->usb_tx_buf, "\x0b\x02\0\0\0\0\0\0", 8);
+ break;
+ case 7:
+ memcpy(context->usb_tx_buf,
+ context->tx.data_buf + 16, 8);
+ break;
+ case 8:
+ memcpy(context->usb_tx_buf,
+ context->tx.data_buf + 24, 8);
+ break;
+ }
+ retval = send_packet(context);
+ if (retval) {
+
+ err("%s: send packet failed for packet #%d",
+ __func__, i);
+ goto exit;
+ }
+ }
+exit:
+
+ mutex_unlock(&context->ctx_lock);
+
+ return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Callback function for USB core API: transmit data
+ */
+static void usb_tx_callback(struct urb *urb)
+{
+ struct sasem_context *context;
+
+ if (!urb)
+ return;
+ context = (struct sasem_context *) urb->context;
+ if (!context)
+ return;
+
+ context->tx.status = urb->status;
+
+ /* notify waiters that write has finished */
+ atomic_set(&context->tx.busy, 0);
+ complete(&context->tx.finished);
+
+ return;
+}
+
+/**
+ * Called by lirc_dev when the application opens /dev/lirc
+ */
+static int ir_open(void *data)
+{
+ int retval = 0;
+ struct sasem_context *context;
+
+ /* prevent races with disconnect */
+ mutex_lock(&disconnect_lock);
+
+ context = (struct sasem_context *) data;
+
+ mutex_lock(&context->ctx_lock);
+
+ if (context->ir_isopen) {
+ err("%s: IR port is already open", __func__);
+ retval = -EBUSY;
+ goto exit;
+ }
+
+ usb_fill_int_urb(context->rx_urb, context->dev,
+ usb_rcvintpipe(context->dev,
+ context->rx_endpoint->bEndpointAddress),
+ context->usb_rx_buf, sizeof(context->usb_rx_buf),
+ usb_rx_callback, context, context->rx_endpoint->bInterval);
+
+ retval = usb_submit_urb(context->rx_urb, GFP_KERNEL);
+
+ if (retval)
+ err("%s: usb_submit_urb failed for ir_open (%d)",
+ __func__, retval);
+ else {
+ context->ir_isopen = 1;
+ printk(KERN_INFO "IR port opened\n");
+ }
+
+exit:
+ mutex_unlock(&context->ctx_lock);
+
+ mutex_unlock(&disconnect_lock);
+ return 0;
+}
+
+/**
+ * Called by lirc_dev when the application closes /dev/lirc
+ */
+static void ir_close(void *data)
+{
+ struct sasem_context *context;
+
+ context = (struct sasem_context *)data;
+ if (!context) {
+ err("%s: no context for device", __func__);
+ return;
+ }
+
+ mutex_lock(&context->ctx_lock);
+
+ usb_kill_urb(context->rx_urb);
+ context->ir_isopen = 0;
+ printk(KERN_INFO "IR port closed\n");
+
+ if (!context->dev_present) {
+
+ /*
+ * Device disconnected while IR port was
+ * still open. Driver was not deregistered
+ * at disconnect time, so do it now.
+ */
+ deregister_from_lirc(context);
+
+ if (!context->vfd_isopen) {
+
+ mutex_unlock(&context->ctx_lock);
+ delete_context(context);
+ return;
+ }
+ /* If VFD port is open, context will be deleted by vfd_close */
+ }
+
+ mutex_unlock(&context->ctx_lock);
+ return;
+}
+
+/**
+ * Process the incoming packet
+ */
+static void incoming_packet(struct sasem_context *context,
+ struct urb *urb)
+{
+ int len = urb->actual_length;
+ unsigned char *buf = urb->transfer_buffer;
+ long ms;
+ struct timeval tv;
+
+ if (len != 8) {
+ printk(KERN_WARNING "%s: invalid incoming packet size (%d)\n",
+ __func__, len);
+ return;
+ }
+
+#ifdef DEBUG
+ int i;
+ for (i = 0; i < 8; ++i)
+ printk(KERN_INFO "%02x ", buf[i]);
+ printk(KERN_INFO "\n");
+#endif
+
+ /*
+ * Lirc could deal with the repeat code, but we really need to block it
+ * if it arrives too late. Otherwise we could repeat the wrong code.
+ */
+
+ /* get the time since the last button press */
+ do_gettimeofday(&tv);
+ ms = (tv.tv_sec - context->presstime.tv_sec) * 1000 +
+ (tv.tv_usec - context->presstime.tv_usec) / 1000;
+
+ if (memcmp(buf, "\x08\0\0\0\0\0\0\0", 8) == 0) {
+ /*
+ * the repeat code is being sent, so we copy
+ * the old code to LIRC
+ */
+
+ /*
+ * NOTE: Only if the last code was less than 250ms ago
+ * - no one should be able to push another (undetected) button
+ * in that time and then get a false repeat of the previous
+ * press but it is long enough for a genuine repeat
+ */
+ if ((ms < 250) && (context->codesaved != 0)) {
+ memcpy(buf, &context->lastcode, 8);
+ context->presstime.tv_sec = tv.tv_sec;
+ context->presstime.tv_usec = tv.tv_usec;
+ }
+ } else {
+ /* save the current valid code for repeats */
+ memcpy(&context->lastcode, buf, 8);
+ /*
+ * set flag to signal a valid code was save;
+ * just for safety reasons
+ */
+ context->codesaved = 1;
+ context->presstime.tv_sec = tv.tv_sec;
+ context->presstime.tv_usec = tv.tv_usec;
+ }
+
+ lirc_buffer_write(context->driver->rbuf, buf);
+ wake_up(&context->driver->rbuf->wait_poll);
+}
+
+/**
+ * Callback function for USB core API: receive data
+ */
+static void usb_rx_callback(struct urb *urb)
+{
+ struct sasem_context *context;
+
+ if (!urb)
+ return;
+ context = (struct sasem_context *) urb->context;
+ if (!context)
+ return;
+
+ switch (urb->status) {
+
+ case -ENOENT: /* usbcore unlink successful! */
+ return;
+
+ case 0:
+ if (context->ir_isopen)
+ incoming_packet(context, urb);
+ break;
+
+ default:
+ printk(KERN_WARNING "%s: status (%d): ignored",
+ __func__, urb->status);
+ break;
+ }
+
+ usb_submit_urb(context->rx_urb, GFP_ATOMIC);
+ return;
+}
+
+
+
+/**
+ * Callback function for USB core API: Probe
+ */
+static int sasem_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = NULL;
+ struct usb_host_interface *iface_desc = NULL;
+ struct usb_endpoint_descriptor *rx_endpoint = NULL;
+ struct usb_endpoint_descriptor *tx_endpoint = NULL;
+ struct urb *rx_urb = NULL;
+ struct urb *tx_urb = NULL;
+ struct lirc_driver *driver = NULL;
+ struct lirc_buffer *rbuf = NULL;
+ int lirc_minor = 0;
+ int num_endpoints;
+ int retval = 0;
+ int vfd_ep_found;
+ int ir_ep_found;
+ int alloc_status;
+ struct sasem_context *context = NULL;
+ int i;
+
+ printk(KERN_INFO "%s: found Sasem device\n", __func__);
+
+
+ dev = usb_get_dev(interface_to_usbdev(interface));
+ iface_desc = interface->cur_altsetting;
+ num_endpoints = iface_desc->desc.bNumEndpoints;
+
+ /*
+ * Scan the endpoint list and set:
+ * first input endpoint = IR endpoint
+ * first output endpoint = VFD endpoint
+ */
+
+ ir_ep_found = 0;
+ vfd_ep_found = 0;
+
+ for (i = 0; i < num_endpoints && !(ir_ep_found && vfd_ep_found); ++i) {
+
+ struct usb_endpoint_descriptor *ep;
+ int ep_dir;
+ int ep_type;
+ ep = &iface_desc->endpoint [i].desc;
+ ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+ ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+ if (!ir_ep_found &&
+ ep_dir == USB_DIR_IN &&
+ ep_type == USB_ENDPOINT_XFER_INT) {
+
+ rx_endpoint = ep;
+ ir_ep_found = 1;
+ if (debug)
+ printk(KERN_INFO "%s: found IR endpoint\n",
+ __func__);
+
+ } else if (!vfd_ep_found &&
+ ep_dir == USB_DIR_OUT &&
+ ep_type == USB_ENDPOINT_XFER_INT) {
+
+ tx_endpoint = ep;
+ vfd_ep_found = 1;
+ if (debug)
+ printk(KERN_INFO "%s: found VFD endpoint\n",
+ __func__);
+ }
+ }
+
+ /* Input endpoint is mandatory */
+ if (!ir_ep_found) {
+
+ err("%s: no valid input (IR) endpoint found.", __func__);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ if (!vfd_ep_found)
+ printk(KERN_INFO "%s: no valid output (VFD) endpoint found.\n",
+ __func__);
+
+
+ /* Allocate memory */
+ alloc_status = 0;
+
+ context = kzalloc(sizeof(struct sasem_context), GFP_KERNEL);
+ if (!context) {
+ err("%s: kzalloc failed for context", __func__);
+ alloc_status = 1;
+ goto alloc_status_switch;
+ }
+ driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+ if (!driver) {
+ err("%s: kzalloc failed for lirc_driver", __func__);
+ alloc_status = 2;
+ goto alloc_status_switch;
+ }
+ rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+ if (!rbuf) {
+ err("%s: kmalloc failed for lirc_buffer", __func__);
+ alloc_status = 3;
+ goto alloc_status_switch;
+ }
+ if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) {
+ err("%s: lirc_buffer_init failed", __func__);
+ alloc_status = 4;
+ goto alloc_status_switch;
+ }
+ rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!rx_urb) {
+ err("%s: usb_alloc_urb failed for IR urb", __func__);
+ alloc_status = 5;
+ goto alloc_status_switch;
+ }
+ if (vfd_ep_found) {
+ tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!tx_urb) {
+ err("%s: usb_alloc_urb failed for VFD urb",
+ __func__);
+ alloc_status = 6;
+ goto alloc_status_switch;
+ }
+ }
+
+ mutex_init(&context->ctx_lock);
+
+ strcpy(driver->name, MOD_NAME);
+ driver->minor = -1;
+ driver->code_length = 64;
+ driver->sample_rate = 0;
+ driver->features = LIRC_CAN_REC_LIRCCODE;
+ driver->data = context;
+ driver->rbuf = rbuf;
+ driver->set_use_inc = ir_open;
+ driver->set_use_dec = ir_close;
+ driver->dev = &interface->dev;
+ driver->owner = THIS_MODULE;
+
+ mutex_lock(&context->ctx_lock);
+
+ lirc_minor = lirc_register_driver(driver);
+ if (lirc_minor < 0) {
+ err("%s: lirc_register_driver failed", __func__);
+ alloc_status = 7;
+ mutex_unlock(&context->ctx_lock);
+ } else
+ printk(KERN_INFO "%s: Registered Sasem driver (minor:%d)\n",
+ __func__, lirc_minor);
+
+alloc_status_switch:
+
+ switch (alloc_status) {
+
+ case 7:
+ if (vfd_ep_found)
+ usb_free_urb(tx_urb);
+ case 6:
+ usb_free_urb(rx_urb);
+ case 5:
+ lirc_buffer_free(rbuf);
+ case 4:
+ kfree(rbuf);
+ case 3:
+ kfree(driver);
+ case 2:
+ kfree(context);
+ context = NULL;
+ case 1:
+ retval = -ENOMEM;
+ goto exit;
+ }
+
+ /* Needed while unregistering! */
+ driver->minor = lirc_minor;
+
+ context->dev = dev;
+ context->dev_present = 1;
+ context->rx_endpoint = rx_endpoint;
+ context->rx_urb = rx_urb;
+ if (vfd_ep_found) {
+ context->tx_endpoint = tx_endpoint;
+ context->tx_urb = tx_urb;
+ context->vfd_contrast = 1000; /* range 0 - 1000 */
+ }
+ context->driver = driver;
+
+ usb_set_intfdata(interface, context);
+
+ if (vfd_ep_found) {
+
+ if (debug)
+ printk(KERN_INFO "Registering VFD with sysfs\n");
+ if (usb_register_dev(interface, &sasem_class))
+ /* Not a fatal error, so ignore */
+ printk(KERN_INFO "%s: could not get a minor number "
+ "for VFD\n", __func__);
+ }
+
+ printk(KERN_INFO "%s: Sasem device on usb<%d:%d> initialized\n",
+ __func__, dev->bus->busnum, dev->devnum);
+
+ mutex_unlock(&context->ctx_lock);
+exit:
+ return retval;
+}
+
+/**
+ * Callback function for USB core API: disonnect
+ */
+static void sasem_disconnect(struct usb_interface *interface)
+{
+ struct sasem_context *context;
+
+ /* prevent races with ir_open()/vfd_open() */
+ mutex_lock(&disconnect_lock);
+
+ context = usb_get_intfdata(interface);
+ mutex_lock(&context->ctx_lock);
+
+ printk(KERN_INFO "%s: Sasem device disconnected\n", __func__);
+
+ usb_set_intfdata(interface, NULL);
+ context->dev_present = 0;
+
+ /* Stop reception */
+ usb_kill_urb(context->rx_urb);
+
+ /* Abort ongoing write */
+ if (atomic_read(&context->tx.busy)) {
+
+ usb_kill_urb(context->tx_urb);
+ wait_for_completion(&context->tx.finished);
+ }
+
+ /* De-register from lirc_dev if IR port is not open */
+ if (!context->ir_isopen)
+ deregister_from_lirc(context);
+
+ usb_deregister_dev(interface, &sasem_class);
+
+ mutex_unlock(&context->ctx_lock);
+
+ if (!context->ir_isopen && !context->vfd_isopen)
+ delete_context(context);
+
+ mutex_unlock(&disconnect_lock);
+}
+
+static int __init sasem_init(void)
+{
+ int rc;
+
+ printk(KERN_INFO MOD_DESC ", v" MOD_VERSION "\n");
+ printk(KERN_INFO MOD_AUTHOR "\n");
+
+ rc = usb_register(&sasem_driver);
+ if (rc < 0) {
+ err("%s: usb register failed (%d)", __func__, rc);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void __exit sasem_exit(void)
+{
+ usb_deregister(&sasem_driver);
+ printk(KERN_INFO "module removed. Goodbye!\n");
+}
+
+
+module_init(sasem_init);
+module_exit(sasem_exit);
diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c
new file mode 100644
index 0000000..9456f8e
--- /dev/null
+++ b/drivers/staging/lirc/lirc_serial.c
@@ -0,0 +1,1313 @@
+/*
+ * lirc_serial.c
+ *
+ * lirc_serial - Device driver that records pulse- and pause-lengths
+ * (space-lengths) between DDCD event on a serial port.
+ *
+ * Copyright (C) 1996,97 Ralph Metzler <rjkm@thp.uni-koeln.de>
+ * Copyright (C) 1998 Trent Piepho <xyzzy@u.washington.edu>
+ * Copyright (C) 1998 Ben Pfaff <blp@gnu.org>
+ * Copyright (C) 1999 Christoph Bartelmus <lirc@bartelmus.de>
+ * Copyright (C) 2007 Andrei Tanas <andrei@tanas.ca> (suspend/resume support)
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/*
+ * Steve's changes to improve transmission fidelity:
+ * - for systems with the rdtsc instruction and the clock counter, a
+ * send_pule that times the pulses directly using the counter.
+ * This means that the LIRC_SERIAL_TRANSMITTER_LATENCY fudge is
+ * not needed. Measurement shows very stable waveform, even where
+ * PCI activity slows the access to the UART, which trips up other
+ * versions.
+ * - For other system, non-integer-microsecond pulse/space lengths,
+ * done using fixed point binary. So, much more accurate carrier
+ * frequency.
+ * - fine tuned transmitter latency, taking advantage of fractional
+ * microseconds in previous change
+ * - Fixed bug in the way transmitter latency was accounted for by
+ * tuning the pulse lengths down - the send_pulse routine ignored
+ * this overhead as it timed the overall pulse length - so the
+ * pulse frequency was right but overall pulse length was too
+ * long. Fixed by accounting for latency on each pulse/space
+ * iteration.
+ *
+ * Steve Davies <steve@daviesfam.org> July 2001
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/time.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <linux/platform_device.h>
+
+#include <asm/system.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/fcntl.h>
+#include <linux/spinlock.h>
+
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+#include <asm/hardware.h>
+#endif
+/* From Intel IXP42X Developer's Manual (#252480-005): */
+/* ftp://download.intel.com/design/network/manuals/25248005.pdf */
+#define UART_IE_IXP42X_UUE 0x40 /* IXP42X UART Unit enable */
+#define UART_IE_IXP42X_RTOIE 0x10 /* IXP42X Receiver Data Timeout int.enable */
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+#define LIRC_DRIVER_NAME "lirc_serial"
+
+struct lirc_serial {
+ int signal_pin;
+ int signal_pin_change;
+ u8 on;
+ u8 off;
+ long (*send_pulse)(unsigned long length);
+ void (*send_space)(long length);
+ int features;
+ spinlock_t lock;
+};
+
+#define LIRC_HOMEBREW 0
+#define LIRC_IRDEO 1
+#define LIRC_IRDEO_REMOTE 2
+#define LIRC_ANIMAX 3
+#define LIRC_IGOR 4
+#define LIRC_NSLU2 5
+
+/*** module parameters ***/
+static int type;
+static int io;
+static int irq;
+static int iommap;
+static int ioshift;
+static int softcarrier = 1;
+static int share_irq;
+static int debug;
+static int sense = -1; /* -1 = auto, 0 = active high, 1 = active low */
+static int txsense; /* 0 = active high, 1 = active low */
+
+#define dprintk(fmt, args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \
+ fmt, ## args); \
+ } while (0)
+
+/* forward declarations */
+static long send_pulse_irdeo(unsigned long length);
+static long send_pulse_homebrew(unsigned long length);
+static void send_space_irdeo(long length);
+static void send_space_homebrew(long length);
+
+static struct lirc_serial hardware[] = {
+ [LIRC_HOMEBREW] = {
+ .signal_pin = UART_MSR_DCD,
+ .signal_pin_change = UART_MSR_DDCD,
+ .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
+ .off = (UART_MCR_RTS | UART_MCR_OUT2),
+ .send_pulse = send_pulse_homebrew,
+ .send_space = send_space_homebrew,
+#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER
+ .features = (LIRC_CAN_SET_SEND_DUTY_CYCLE |
+ LIRC_CAN_SET_SEND_CARRIER |
+ LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2)
+#else
+ .features = LIRC_CAN_REC_MODE2
+#endif
+ },
+
+ [LIRC_IRDEO] = {
+ .signal_pin = UART_MSR_DSR,
+ .signal_pin_change = UART_MSR_DDSR,
+ .on = UART_MCR_OUT2,
+ .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+ .send_pulse = send_pulse_irdeo,
+ .send_space = send_space_irdeo,
+ .features = (LIRC_CAN_SET_SEND_DUTY_CYCLE |
+ LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2)
+ },
+
+ [LIRC_IRDEO_REMOTE] = {
+ .signal_pin = UART_MSR_DSR,
+ .signal_pin_change = UART_MSR_DDSR,
+ .on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+ .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+ .send_pulse = send_pulse_irdeo,
+ .send_space = send_space_irdeo,
+ .features = (LIRC_CAN_SET_SEND_DUTY_CYCLE |
+ LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2)
+ },
+
+ [LIRC_ANIMAX] = {
+ .signal_pin = UART_MSR_DCD,
+ .signal_pin_change = UART_MSR_DDCD,
+ .on = 0,
+ .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+ .send_pulse = NULL,
+ .send_space = NULL,
+ .features = LIRC_CAN_REC_MODE2
+ },
+
+ [LIRC_IGOR] = {
+ .signal_pin = UART_MSR_DSR,
+ .signal_pin_change = UART_MSR_DDSR,
+ .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
+ .off = (UART_MCR_RTS | UART_MCR_OUT2),
+ .send_pulse = send_pulse_homebrew,
+ .send_space = send_space_homebrew,
+#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER
+ .features = (LIRC_CAN_SET_SEND_DUTY_CYCLE |
+ LIRC_CAN_SET_SEND_CARRIER |
+ LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2)
+#else
+ .features = LIRC_CAN_REC_MODE2
+#endif
+ },
+
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+ /*
+ * Modified Linksys Network Storage Link USB 2.0 (NSLU2):
+ * We receive on CTS of the 2nd serial port (R142,LHS), we
+ * transmit with a IR diode between GPIO[1] (green status LED),
+ * and ground (Matthias Goebl <matthias.goebl@goebl.net>).
+ * See also http://www.nslu2-linux.org for this device
+ */
+ [LIRC_NSLU2] = {
+ .signal_pin = UART_MSR_CTS,
+ .signal_pin_change = UART_MSR_DCTS,
+ .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
+ .off = (UART_MCR_RTS | UART_MCR_OUT2),
+ .send_pulse = send_pulse_homebrew,
+ .send_space = send_space_homebrew,
+#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER
+ .features = (LIRC_CAN_SET_SEND_DUTY_CYCLE |
+ LIRC_CAN_SET_SEND_CARRIER |
+ LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2)
+#else
+ .features = LIRC_CAN_REC_MODE2
+#endif
+ },
+#endif
+
+};
+
+#define RS_ISR_PASS_LIMIT 256
+
+/*
+ * A long pulse code from a remote might take up to 300 bytes. The
+ * daemon should read the bytes as soon as they are generated, so take
+ * the number of keys you think you can push before the daemon runs
+ * and multiply by 300. The driver will warn you if you overrun this
+ * buffer. If you have a slow computer or non-busmastering IDE disks,
+ * maybe you will need to increase this.
+ */
+
+/* This MUST be a power of two! It has to be larger than 1 as well. */
+
+#define RBUF_LEN 256
+
+static struct timeval lasttv = {0, 0};
+
+static struct lirc_buffer rbuf;
+
+static unsigned int freq = 38000;
+static unsigned int duty_cycle = 50;
+
+/* Initialized in init_timing_params() */
+static unsigned long period;
+static unsigned long pulse_width;
+static unsigned long space_width;
+
+#if defined(__i386__)
+/*
+ * From:
+ * Linux I/O port programming mini-HOWTO
+ * Author: Riku Saikkonen <Riku.Saikkonen@hut.fi>
+ * v, 28 December 1997
+ *
+ * [...]
+ * Actually, a port I/O instruction on most ports in the 0-0x3ff range
+ * takes almost exactly 1 microsecond, so if you're, for example, using
+ * the parallel port directly, just do additional inb()s from that port
+ * to delay.
+ * [...]
+ */
+/* transmitter latency 1.5625us 0x1.90 - this figure arrived at from
+ * comment above plus trimming to match actual measured frequency.
+ * This will be sensitive to cpu speed, though hopefully most of the 1.5us
+ * is spent in the uart access. Still - for reference test machine was a
+ * 1.13GHz Athlon system - Steve
+ */
+
+/*
+ * changed from 400 to 450 as this works better on slower machines;
+ * faster machines will use the rdtsc code anyway
+ */
+#define LIRC_SERIAL_TRANSMITTER_LATENCY 450
+
+#else
+
+/* does anybody have information on other platforms ? */
+/* 256 = 1<<8 */
+#define LIRC_SERIAL_TRANSMITTER_LATENCY 256
+
+#endif /* __i386__ */
+/*
+ * FIXME: should we be using hrtimers instead of this
+ * LIRC_SERIAL_TRANSMITTER_LATENCY nonsense?
+ */
+
+/* fetch serial input packet (1 byte) from register offset */
+static u8 sinp(int offset)
+{
+ if (iommap != 0)
+ /* the register is memory-mapped */
+ offset <<= ioshift;
+
+ return inb(io + offset);
+}
+
+/* write serial output packet (1 byte) of value to register offset */
+static void soutp(int offset, u8 value)
+{
+ if (iommap != 0)
+ /* the register is memory-mapped */
+ offset <<= ioshift;
+
+ outb(value, io + offset);
+}
+
+static void on(void)
+{
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+ /*
+ * On NSLU2, we put the transmit diode between the output of the green
+ * status LED and ground
+ */
+ if (type == LIRC_NSLU2) {
+ gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_LOW);
+ return;
+ }
+#endif
+ if (txsense)
+ soutp(UART_MCR, hardware[type].off);
+ else
+ soutp(UART_MCR, hardware[type].on);
+}
+
+static void off(void)
+{
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+ if (type == LIRC_NSLU2) {
+ gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_HIGH);
+ return;
+ }
+#endif
+ if (txsense)
+ soutp(UART_MCR, hardware[type].on);
+ else
+ soutp(UART_MCR, hardware[type].off);
+}
+
+#ifndef MAX_UDELAY_MS
+#define MAX_UDELAY_US 5000
+#else
+#define MAX_UDELAY_US (MAX_UDELAY_MS*1000)
+#endif
+
+static void safe_udelay(unsigned long usecs)
+{
+ while (usecs > MAX_UDELAY_US) {
+ udelay(MAX_UDELAY_US);
+ usecs -= MAX_UDELAY_US;
+ }
+ udelay(usecs);
+}
+
+#ifdef USE_RDTSC
+/*
+ * This is an overflow/precision juggle, complicated in that we can't
+ * do long long divide in the kernel
+ */
+
+/*
+ * When we use the rdtsc instruction to measure clocks, we keep the
+ * pulse and space widths as clock cycles. As this is CPU speed
+ * dependent, the widths must be calculated in init_port and ioctl
+ * time
+ */
+
+/* So send_pulse can quickly convert microseconds to clocks */
+static unsigned long conv_us_to_clocks;
+
+static int init_timing_params(unsigned int new_duty_cycle,
+ unsigned int new_freq)
+{
+ unsigned long long loops_per_sec, work;
+
+ duty_cycle = new_duty_cycle;
+ freq = new_freq;
+
+ loops_per_sec = current_cpu_data.loops_per_jiffy;
+ loops_per_sec *= HZ;
+
+ /* How many clocks in a microsecond?, avoiding long long divide */
+ work = loops_per_sec;
+ work *= 4295; /* 4295 = 2^32 / 1e6 */
+ conv_us_to_clocks = (work >> 32);
+
+ /*
+ * Carrier period in clocks, approach good up to 32GHz clock,
+ * gets carrier frequency within 8Hz
+ */
+ period = loops_per_sec >> 3;
+ period /= (freq >> 3);
+
+ /* Derive pulse and space from the period */
+ pulse_width = period * duty_cycle / 100;
+ space_width = period - pulse_width;
+ dprintk("in init_timing_params, freq=%d, duty_cycle=%d, "
+ "clk/jiffy=%ld, pulse=%ld, space=%ld, "
+ "conv_us_to_clocks=%ld\n",
+ freq, duty_cycle, current_cpu_data.loops_per_jiffy,
+ pulse_width, space_width, conv_us_to_clocks);
+ return 0;
+}
+#else /* ! USE_RDTSC */
+static int init_timing_params(unsigned int new_duty_cycle,
+ unsigned int new_freq)
+{
+/*
+ * period, pulse/space width are kept with 8 binary places -
+ * IE multiplied by 256.
+ */
+ if (256 * 1000000L / new_freq * new_duty_cycle / 100 <=
+ LIRC_SERIAL_TRANSMITTER_LATENCY)
+ return -EINVAL;
+ if (256 * 1000000L / new_freq * (100 - new_duty_cycle) / 100 <=
+ LIRC_SERIAL_TRANSMITTER_LATENCY)
+ return -EINVAL;
+ duty_cycle = new_duty_cycle;
+ freq = new_freq;
+ period = 256 * 1000000L / freq;
+ pulse_width = period * duty_cycle / 100;
+ space_width = period - pulse_width;
+ dprintk("in init_timing_params, freq=%d pulse=%ld, "
+ "space=%ld\n", freq, pulse_width, space_width);
+ return 0;
+}
+#endif /* USE_RDTSC */
+
+
+/* return value: space length delta */
+
+static long send_pulse_irdeo(unsigned long length)
+{
+ long rawbits, ret;
+ int i;
+ unsigned char output;
+ unsigned char chunk, shifted;
+
+ /* how many bits have to be sent ? */
+ rawbits = length * 1152 / 10000;
+ if (duty_cycle > 50)
+ chunk = 3;
+ else
+ chunk = 1;
+ for (i = 0, output = 0x7f; rawbits > 0; rawbits -= 3) {
+ shifted = chunk << (i * 3);
+ shifted >>= 1;
+ output &= (~shifted);
+ i++;
+ if (i == 3) {
+ soutp(UART_TX, output);
+ while (!(sinp(UART_LSR) & UART_LSR_THRE))
+ ;
+ output = 0x7f;
+ i = 0;
+ }
+ }
+ if (i != 0) {
+ soutp(UART_TX, output);
+ while (!(sinp(UART_LSR) & UART_LSR_TEMT))
+ ;
+ }
+
+ if (i == 0)
+ ret = (-rawbits) * 10000 / 1152;
+ else
+ ret = (3 - i) * 3 * 10000 / 1152 + (-rawbits) * 10000 / 1152;
+
+ return ret;
+}
+
+#ifdef USE_RDTSC
+/* Version that uses Pentium rdtsc instruction to measure clocks */
+
+/*
+ * This version does sub-microsecond timing using rdtsc instruction,
+ * and does away with the fudged LIRC_SERIAL_TRANSMITTER_LATENCY
+ * Implicitly i586 architecture... - Steve
+ */
+
+static long send_pulse_homebrew_softcarrier(unsigned long length)
+{
+ int flag;
+ unsigned long target, start, now;
+
+ /* Get going quick as we can */
+ rdtscl(start);
+ on();
+ /* Convert length from microseconds to clocks */
+ length *= conv_us_to_clocks;
+ /* And loop till time is up - flipping at right intervals */
+ now = start;
+ target = pulse_width;
+ flag = 1;
+ /*
+ * FIXME: This looks like a hard busy wait, without even an occasional,
+ * polite, cpu_relax() call. There's got to be a better way?
+ *
+ * The i2c code has the result of a lot of bit-banging work, I wonder if
+ * there's something there which could be helpful here.
+ */
+ while ((now - start) < length) {
+ /* Delay till flip time */
+ do {
+ rdtscl(now);
+ } while ((now - start) < target);
+
+ /* flip */
+ if (flag) {
+ rdtscl(now);
+ off();
+ target += space_width;
+ } else {
+ rdtscl(now); on();
+ target += pulse_width;
+ }
+ flag = !flag;
+ }
+ rdtscl(now);
+ return ((now - start) - length) / conv_us_to_clocks;
+}
+#else /* ! USE_RDTSC */
+/* Version using udelay() */
+
+/*
+ * here we use fixed point arithmetic, with 8
+ * fractional bits. that gets us within 0.1% or so of the right average
+ * frequency, albeit with some jitter in pulse length - Steve
+ */
+
+/* To match 8 fractional bits used for pulse/space length */
+
+static long send_pulse_homebrew_softcarrier(unsigned long length)
+{
+ int flag;
+ unsigned long actual, target, d;
+ length <<= 8;
+
+ actual = 0; target = 0; flag = 0;
+ while (actual < length) {
+ if (flag) {
+ off();
+ target += space_width;
+ } else {
+ on();
+ target += pulse_width;
+ }
+ d = (target - actual -
+ LIRC_SERIAL_TRANSMITTER_LATENCY + 128) >> 8;
+ /*
+ * Note - we've checked in ioctl that the pulse/space
+ * widths are big enough so that d is > 0
+ */
+ udelay(d);
+ actual += (d << 8) + LIRC_SERIAL_TRANSMITTER_LATENCY;
+ flag = !flag;
+ }
+ return (actual-length) >> 8;
+}
+#endif /* USE_RDTSC */
+
+static long send_pulse_homebrew(unsigned long length)
+{
+ if (length <= 0)
+ return 0;
+
+ if (softcarrier)
+ return send_pulse_homebrew_softcarrier(length);
+ else {
+ on();
+ safe_udelay(length);
+ return 0;
+ }
+}
+
+static void send_space_irdeo(long length)
+{
+ if (length <= 0)
+ return;
+
+ safe_udelay(length);
+}
+
+static void send_space_homebrew(long length)
+{
+ off();
+ if (length <= 0)
+ return;
+ safe_udelay(length);
+}
+
+static void rbwrite(int l)
+{
+ if (lirc_buffer_full(&rbuf)) {
+ /* no new signals will be accepted */
+ dprintk("Buffer overrun\n");
+ return;
+ }
+ lirc_buffer_write(&rbuf, (void *)&l);
+}
+
+static void frbwrite(int l)
+{
+ /* simple noise filter */
+ static int pulse, space;
+ static unsigned int ptr;
+
+ if (ptr > 0 && (l & PULSE_BIT)) {
+ pulse += l & PULSE_MASK;
+ if (pulse > 250) {
+ rbwrite(space);
+ rbwrite(pulse | PULSE_BIT);
+ ptr = 0;
+ pulse = 0;
+ }
+ return;
+ }
+ if (!(l & PULSE_BIT)) {
+ if (ptr == 0) {
+ if (l > 20000) {
+ space = l;
+ ptr++;
+ return;
+ }
+ } else {
+ if (l > 20000) {
+ space += pulse;
+ if (space > PULSE_MASK)
+ space = PULSE_MASK;
+ space += l;
+ if (space > PULSE_MASK)
+ space = PULSE_MASK;
+ pulse = 0;
+ return;
+ }
+ rbwrite(space);
+ rbwrite(pulse | PULSE_BIT);
+ ptr = 0;
+ pulse = 0;
+ }
+ }
+ rbwrite(l);
+}
+
+static irqreturn_t irq_handler(int i, void *blah)
+{
+ struct timeval tv;
+ int counter, dcd;
+ u8 status;
+ long deltv;
+ int data;
+ static int last_dcd = -1;
+
+ if ((sinp(UART_IIR) & UART_IIR_NO_INT)) {
+ /* not our interrupt */
+ return IRQ_NONE;
+ }
+
+ counter = 0;
+ do {
+ counter++;
+ status = sinp(UART_MSR);
+ if (counter > RS_ISR_PASS_LIMIT) {
+ printk(KERN_WARNING LIRC_DRIVER_NAME ": AIEEEE: "
+ "We're caught!\n");
+ break;
+ }
+ if ((status & hardware[type].signal_pin_change)
+ && sense != -1) {
+ /* get current time */
+ do_gettimeofday(&tv);
+
+ /* New mode, written by Trent Piepho
+ <xyzzy@u.washington.edu>. */
+
+ /*
+ * The old format was not very portable.
+ * We now use an int to pass pulses
+ * and spaces to user space.
+ *
+ * If PULSE_BIT is set a pulse has been
+ * received, otherwise a space has been
+ * received. The driver needs to know if your
+ * receiver is active high or active low, or
+ * the space/pulse sense could be
+ * inverted. The bits denoted by PULSE_MASK are
+ * the length in microseconds. Lengths greater
+ * than or equal to 16 seconds are clamped to
+ * PULSE_MASK. All other bits are unused.
+ * This is a much simpler interface for user
+ * programs, as well as eliminating "out of
+ * phase" errors with space/pulse
+ * autodetection.
+ */
+
+ /* calc time since last interrupt in microseconds */
+ dcd = (status & hardware[type].signal_pin) ? 1 : 0;
+
+ if (dcd == last_dcd) {
+ printk(KERN_WARNING LIRC_DRIVER_NAME
+ ": ignoring spike: %d %d %lx %lx %lx %lx\n",
+ dcd, sense,
+ tv.tv_sec, lasttv.tv_sec,
+ tv.tv_usec, lasttv.tv_usec);
+ continue;
+ }
+
+ deltv = tv.tv_sec-lasttv.tv_sec;
+ if (tv.tv_sec < lasttv.tv_sec ||
+ (tv.tv_sec == lasttv.tv_sec &&
+ tv.tv_usec < lasttv.tv_usec)) {
+ printk(KERN_WARNING LIRC_DRIVER_NAME
+ ": AIEEEE: your clock just jumped "
+ "backwards\n");
+ printk(KERN_WARNING LIRC_DRIVER_NAME
+ ": %d %d %lx %lx %lx %lx\n",
+ dcd, sense,
+ tv.tv_sec, lasttv.tv_sec,
+ tv.tv_usec, lasttv.tv_usec);
+ data = PULSE_MASK;
+ } else if (deltv > 15) {
+ data = PULSE_MASK; /* really long time */
+ if (!(dcd^sense)) {
+ /* sanity check */
+ printk(KERN_WARNING LIRC_DRIVER_NAME
+ ": AIEEEE: "
+ "%d %d %lx %lx %lx %lx\n",
+ dcd, sense,
+ tv.tv_sec, lasttv.tv_sec,
+ tv.tv_usec, lasttv.tv_usec);
+ /*
+ * detecting pulse while this
+ * MUST be a space!
+ */
+ sense = sense ? 0 : 1;
+ }
+ } else
+ data = (int) (deltv*1000000 +
+ tv.tv_usec -
+ lasttv.tv_usec);
+ frbwrite(dcd^sense ? data : (data|PULSE_BIT));
+ lasttv = tv;
+ last_dcd = dcd;
+ wake_up_interruptible(&rbuf.wait_poll);
+ }
+ } while (!(sinp(UART_IIR) & UART_IIR_NO_INT)); /* still pending ? */
+ return IRQ_HANDLED;
+}
+
+
+static int hardware_init_port(void)
+{
+ u8 scratch, scratch2, scratch3;
+
+ /*
+ * This is a simple port existence test, borrowed from the autoconfig
+ * function in drivers/serial/8250.c
+ */
+ scratch = sinp(UART_IER);
+ soutp(UART_IER, 0);
+#ifdef __i386__
+ outb(0xff, 0x080);
+#endif
+ scratch2 = sinp(UART_IER) & 0x0f;
+ soutp(UART_IER, 0x0f);
+#ifdef __i386__
+ outb(0x00, 0x080);
+#endif
+ scratch3 = sinp(UART_IER) & 0x0f;
+ soutp(UART_IER, scratch);
+ if (scratch2 != 0 || scratch3 != 0x0f) {
+ /* we fail, there's nothing here */
+ printk(KERN_ERR LIRC_DRIVER_NAME ": port existence test "
+ "failed, cannot continue\n");
+ return -EINVAL;
+ }
+
+
+
+ /* Set DLAB 0. */
+ soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+ /* First of all, disable all interrupts */
+ soutp(UART_IER, sinp(UART_IER) &
+ (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
+
+ /* Clear registers. */
+ sinp(UART_LSR);
+ sinp(UART_RX);
+ sinp(UART_IIR);
+ sinp(UART_MSR);
+
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+ if (type == LIRC_NSLU2) {
+ /* Setup NSLU2 UART */
+
+ /* Enable UART */
+ soutp(UART_IER, sinp(UART_IER) | UART_IE_IXP42X_UUE);
+ /* Disable Receiver data Time out interrupt */
+ soutp(UART_IER, sinp(UART_IER) & ~UART_IE_IXP42X_RTOIE);
+ /* set out2 = interrupt unmask; off() doesn't set MCR
+ on NSLU2 */
+ soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2);
+ }
+#endif
+
+ /* Set line for power source */
+ off();
+
+ /* Clear registers again to be sure. */
+ sinp(UART_LSR);
+ sinp(UART_RX);
+ sinp(UART_IIR);
+ sinp(UART_MSR);
+
+ switch (type) {
+ case LIRC_IRDEO:
+ case LIRC_IRDEO_REMOTE:
+ /* setup port to 7N1 @ 115200 Baud */
+ /* 7N1+start = 9 bits at 115200 ~ 3 bits at 38kHz */
+
+ /* Set DLAB 1. */
+ soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
+ /* Set divisor to 1 => 115200 Baud */
+ soutp(UART_DLM, 0);
+ soutp(UART_DLL, 1);
+ /* Set DLAB 0 + 7N1 */
+ soutp(UART_LCR, UART_LCR_WLEN7);
+ /* THR interrupt already disabled at this point */
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int init_port(void)
+{
+ int i, nlow, nhigh;
+
+ /* Reserve io region. */
+ /*
+ * Future MMAP-Developers: Attention!
+ * For memory mapped I/O you *might* need to use ioremap() first,
+ * for the NSLU2 it's done in boot code.
+ */
+ if (((iommap != 0)
+ && (request_mem_region(iommap, 8 << ioshift,
+ LIRC_DRIVER_NAME) == NULL))
+ || ((iommap == 0)
+ && (request_region(io, 8, LIRC_DRIVER_NAME) == NULL))) {
+ printk(KERN_ERR LIRC_DRIVER_NAME
+ ": port %04x already in use\n", io);
+ printk(KERN_WARNING LIRC_DRIVER_NAME
+ ": use 'setserial /dev/ttySX uart none'\n");
+ printk(KERN_WARNING LIRC_DRIVER_NAME
+ ": or compile the serial port driver as module and\n");
+ printk(KERN_WARNING LIRC_DRIVER_NAME
+ ": make sure this module is loaded first\n");
+ return -EBUSY;
+ }
+
+ if (hardware_init_port() < 0)
+ return -EINVAL;
+
+ /* Initialize pulse/space widths */
+ init_timing_params(duty_cycle, freq);
+
+ /* If pin is high, then this must be an active low receiver. */
+ if (sense == -1) {
+ /* wait 1/2 sec for the power supply */
+ msleep(500);
+
+ /*
+ * probe 9 times every 0.04s, collect "votes" for
+ * active high/low
+ */
+ nlow = 0;
+ nhigh = 0;
+ for (i = 0; i < 9; i++) {
+ if (sinp(UART_MSR) & hardware[type].signal_pin)
+ nlow++;
+ else
+ nhigh++;
+ msleep(40);
+ }
+ sense = (nlow >= nhigh ? 1 : 0);
+ printk(KERN_INFO LIRC_DRIVER_NAME ": auto-detected active "
+ "%s receiver\n", sense ? "low" : "high");
+ } else
+ printk(KERN_INFO LIRC_DRIVER_NAME ": Manually using active "
+ "%s receiver\n", sense ? "low" : "high");
+
+ return 0;
+}
+
+static int set_use_inc(void *data)
+{
+ int result;
+ unsigned long flags;
+
+ /* initialize timestamp */
+ do_gettimeofday(&lasttv);
+
+ result = request_irq(irq, irq_handler,
+ IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0),
+ LIRC_DRIVER_NAME, (void *)&hardware);
+
+ switch (result) {
+ case -EBUSY:
+ printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq);
+ return -EBUSY;
+ case -EINVAL:
+ printk(KERN_ERR LIRC_DRIVER_NAME
+ ": Bad irq number or handler\n");
+ return -EINVAL;
+ default:
+ dprintk("Interrupt %d, port %04x obtained\n", irq, io);
+ break;
+ };
+
+ spin_lock_irqsave(&hardware[type].lock, flags);
+
+ /* Set DLAB 0. */
+ soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+ soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI);
+
+ spin_unlock_irqrestore(&hardware[type].lock, flags);
+
+ return 0;
+}
+
+static void set_use_dec(void *data)
+{ unsigned long flags;
+
+ spin_lock_irqsave(&hardware[type].lock, flags);
+
+ /* Set DLAB 0. */
+ soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+ /* First of all, disable all interrupts */
+ soutp(UART_IER, sinp(UART_IER) &
+ (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
+ spin_unlock_irqrestore(&hardware[type].lock, flags);
+
+ free_irq(irq, (void *)&hardware);
+
+ dprintk("freed IRQ %d\n", irq);
+}
+
+static ssize_t lirc_write(struct file *file, const char *buf,
+ size_t n, loff_t *ppos)
+{
+ int i, count;
+ unsigned long flags;
+ long delta = 0;
+ int *wbuf;
+
+ if (!(hardware[type].features & LIRC_CAN_SEND_PULSE))
+ return -EBADF;
+
+ count = n / sizeof(int);
+ if (n % sizeof(int) || count % 2 == 0)
+ return -EINVAL;
+ wbuf = memdup_user(buf, n);
+ if (PTR_ERR(wbuf))
+ return PTR_ERR(wbuf);
+ spin_lock_irqsave(&hardware[type].lock, flags);
+ if (type == LIRC_IRDEO) {
+ /* DTR, RTS down */
+ on();
+ }
+ for (i = 0; i < count; i++) {
+ if (i%2)
+ hardware[type].send_space(wbuf[i] - delta);
+ else
+ delta = hardware[type].send_pulse(wbuf[i]);
+ }
+ off();
+ spin_unlock_irqrestore(&hardware[type].lock, flags);
+ return n;
+}
+
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+ int result;
+ unsigned long value;
+ unsigned int ivalue;
+
+ switch (cmd) {
+ case LIRC_GET_SEND_MODE:
+ if (!(hardware[type].features&LIRC_CAN_SEND_MASK))
+ return -ENOIOCTLCMD;
+
+ result = put_user(LIRC_SEND2MODE
+ (hardware[type].features&LIRC_CAN_SEND_MASK),
+ (unsigned long *) arg);
+ if (result)
+ return result;
+ break;
+
+ case LIRC_SET_SEND_MODE:
+ if (!(hardware[type].features&LIRC_CAN_SEND_MASK))
+ return -ENOIOCTLCMD;
+
+ result = get_user(value, (unsigned long *) arg);
+ if (result)
+ return result;
+ /* only LIRC_MODE_PULSE supported */
+ if (value != LIRC_MODE_PULSE)
+ return -ENOSYS;
+ break;
+
+ case LIRC_GET_LENGTH:
+ return -ENOSYS;
+ break;
+
+ case LIRC_SET_SEND_DUTY_CYCLE:
+ dprintk("SET_SEND_DUTY_CYCLE\n");
+ if (!(hardware[type].features&LIRC_CAN_SET_SEND_DUTY_CYCLE))
+ return -ENOIOCTLCMD;
+
+ result = get_user(ivalue, (unsigned int *) arg);
+ if (result)
+ return result;
+ if (ivalue <= 0 || ivalue > 100)
+ return -EINVAL;
+ return init_timing_params(ivalue, freq);
+ break;
+
+ case LIRC_SET_SEND_CARRIER:
+ dprintk("SET_SEND_CARRIER\n");
+ if (!(hardware[type].features&LIRC_CAN_SET_SEND_CARRIER))
+ return -ENOIOCTLCMD;
+
+ result = get_user(ivalue, (unsigned int *) arg);
+ if (result)
+ return result;
+ if (ivalue > 500000 || ivalue < 20000)
+ return -EINVAL;
+ return init_timing_params(duty_cycle, ivalue);
+ break;
+
+ default:
+ return lirc_dev_fop_ioctl(filep, cmd, arg);
+ }
+ return 0;
+}
+
+static const struct file_operations lirc_fops = {
+ .owner = THIS_MODULE,
+ .write = lirc_write,
+ .unlocked_ioctl = lirc_ioctl,
+ .read = lirc_dev_fop_read,
+ .poll = lirc_dev_fop_poll,
+ .open = lirc_dev_fop_open,
+ .release = lirc_dev_fop_close,
+};
+
+static struct lirc_driver driver = {
+ .name = LIRC_DRIVER_NAME,
+ .minor = -1,
+ .code_length = 1,
+ .sample_rate = 0,
+ .data = NULL,
+ .add_to_buf = NULL,
+ .rbuf = &rbuf,
+ .set_use_inc = set_use_inc,
+ .set_use_dec = set_use_dec,
+ .fops = &lirc_fops,
+ .dev = NULL,
+ .owner = THIS_MODULE,
+};
+
+static struct platform_device *lirc_serial_dev;
+
+static int __devinit lirc_serial_probe(struct platform_device *dev)
+{
+ return 0;
+}
+
+static int __devexit lirc_serial_remove(struct platform_device *dev)
+{
+ return 0;
+}
+
+static int lirc_serial_suspend(struct platform_device *dev,
+ pm_message_t state)
+{
+ /* Set DLAB 0. */
+ soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+ /* Disable all interrupts */
+ soutp(UART_IER, sinp(UART_IER) &
+ (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
+
+ /* Clear registers. */
+ sinp(UART_LSR);
+ sinp(UART_RX);
+ sinp(UART_IIR);
+ sinp(UART_MSR);
+
+ return 0;
+}
+
+/* twisty maze... need a forward-declaration here... */
+static void lirc_serial_exit(void);
+
+static int lirc_serial_resume(struct platform_device *dev)
+{
+ unsigned long flags;
+
+ if (hardware_init_port() < 0) {
+ lirc_serial_exit();
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&hardware[type].lock, flags);
+ /* Enable Interrupt */
+ do_gettimeofday(&lasttv);
+ soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI);
+ off();
+
+ lirc_buffer_clear(&rbuf);
+
+ spin_unlock_irqrestore(&hardware[type].lock, flags);
+
+ return 0;
+}
+
+static struct platform_driver lirc_serial_driver = {
+ .probe = lirc_serial_probe,
+ .remove = __devexit_p(lirc_serial_remove),
+ .suspend = lirc_serial_suspend,
+ .resume = lirc_serial_resume,
+ .driver = {
+ .name = "lirc_serial",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init lirc_serial_init(void)
+{
+ int result;
+
+ /* Init read buffer. */
+ result = lirc_buffer_init(&rbuf, sizeof(int), RBUF_LEN);
+ if (result < 0)
+ return -ENOMEM;
+
+ result = platform_driver_register(&lirc_serial_driver);
+ if (result) {
+ printk("lirc register returned %d\n", result);
+ goto exit_buffer_free;
+ }
+
+ lirc_serial_dev = platform_device_alloc("lirc_serial", 0);
+ if (!lirc_serial_dev) {
+ result = -ENOMEM;
+ goto exit_driver_unregister;
+ }
+
+ result = platform_device_add(lirc_serial_dev);
+ if (result)
+ goto exit_device_put;
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(lirc_serial_dev);
+exit_driver_unregister:
+ platform_driver_unregister(&lirc_serial_driver);
+exit_buffer_free:
+ lirc_buffer_free(&rbuf);
+ return result;
+}
+
+static void lirc_serial_exit(void)
+{
+ platform_device_unregister(lirc_serial_dev);
+ platform_driver_unregister(&lirc_serial_driver);
+ lirc_buffer_free(&rbuf);
+}
+
+static int __init lirc_serial_init_module(void)
+{
+ int result;
+
+ result = lirc_serial_init();
+ if (result)
+ return result;
+
+ switch (type) {
+ case LIRC_HOMEBREW:
+ case LIRC_IRDEO:
+ case LIRC_IRDEO_REMOTE:
+ case LIRC_ANIMAX:
+ case LIRC_IGOR:
+ /* if nothing specified, use ttyS0/com1 and irq 4 */
+ io = io ? io : 0x3f8;
+ irq = irq ? irq : 4;
+ break;
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+ case LIRC_NSLU2:
+ io = io ? io : IRQ_IXP4XX_UART2;
+ irq = irq ? irq : (IXP4XX_UART2_BASE_VIRT + REG_OFFSET);
+ iommap = iommap ? iommap : IXP4XX_UART2_BASE_PHYS;
+ ioshift = ioshift ? ioshift : 2;
+ break;
+#endif
+ default:
+ result = -EINVAL;
+ goto exit_serial_exit;
+ }
+ if (!softcarrier) {
+ switch (type) {
+ case LIRC_HOMEBREW:
+ case LIRC_IGOR:
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+ case LIRC_NSLU2:
+#endif
+ hardware[type].features &=
+ ~(LIRC_CAN_SET_SEND_DUTY_CYCLE|
+ LIRC_CAN_SET_SEND_CARRIER);
+ break;
+ }
+ }
+
+ result = init_port();
+ if (result < 0)
+ goto exit_serial_exit;
+ driver.features = hardware[type].features;
+ driver.dev = &lirc_serial_dev->dev;
+ driver.minor = lirc_register_driver(&driver);
+ if (driver.minor < 0) {
+ printk(KERN_ERR LIRC_DRIVER_NAME
+ ": register_chrdev failed!\n");
+ result = -EIO;
+ goto exit_release;
+ }
+ return 0;
+exit_release:
+ release_region(io, 8);
+exit_serial_exit:
+ lirc_serial_exit();
+ return result;
+}
+
+static void __exit lirc_serial_exit_module(void)
+{
+ lirc_serial_exit();
+ if (iommap != 0)
+ release_mem_region(iommap, 8 << ioshift);
+ else
+ release_region(io, 8);
+ lirc_unregister_driver(driver.minor);
+ dprintk("cleaned up module\n");
+}
+
+
+module_init(lirc_serial_init_module);
+module_exit(lirc_serial_exit_module);
+
+MODULE_DESCRIPTION("Infra-red receiver driver for serial ports.");
+MODULE_AUTHOR("Ralph Metzler, Trent Piepho, Ben Pfaff, "
+ "Christoph Bartelmus, Andrei Tanas");
+MODULE_LICENSE("GPL");
+
+module_param(type, int, S_IRUGO);
+MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo,"
+ " 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug,"
+ " 5 = NSLU2 RX:CTS2/TX:GreenLED)");
+
+module_param(io, int, S_IRUGO);
+MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");
+
+/* some architectures (e.g. intel xscale) have memory mapped registers */
+module_param(iommap, bool, S_IRUGO);
+MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O"
+ " (0 = no memory mapped io)");
+
+/*
+ * some architectures (e.g. intel xscale) align the 8bit serial registers
+ * on 32bit word boundaries.
+ * See linux-kernel/serial/8250.c serial_in()/out()
+ */
+module_param(ioshift, int, S_IRUGO);
+MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)");
+
+module_param(irq, int, S_IRUGO);
+MODULE_PARM_DESC(irq, "Interrupt (4 or 3)");
+
+module_param(share_irq, bool, S_IRUGO);
+MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)");
+
+module_param(sense, bool, S_IRUGO);
+MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit"
+ " (0 = active high, 1 = active low )");
+
+#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER
+module_param(txsense, bool, S_IRUGO);
+MODULE_PARM_DESC(txsense, "Sense of transmitter circuit"
+ " (0 = active high, 1 = active low )");
+#endif
+
+module_param(softcarrier, bool, S_IRUGO);
+MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default on)");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c
new file mode 100644
index 0000000..eb08fa7
--- /dev/null
+++ b/drivers/staging/lirc/lirc_sir.c
@@ -0,0 +1,1282 @@
+/*
+ * LIRC SIR driver, (C) 2000 Milan Pikula <www@fornax.sk>
+ *
+ * lirc_sir - Device driver for use with SIR (serial infra red)
+ * mode of IrDA on many notebooks.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * 2000/09/16 Frank Przybylski <mail@frankprzybylski.de> :
+ * added timeout and relaxed pulse detection, removed gap bug
+ *
+ * 2000/12/15 Christoph Bartelmus <lirc@bartelmus.de> :
+ * added support for Tekram Irmate 210 (sending does not work yet,
+ * kind of disappointing that nobody was able to implement that
+ * before),
+ * major clean-up
+ *
+ * 2001/02/27 Christoph Bartelmus <lirc@bartelmus.de> :
+ * added support for StrongARM SA1100 embedded microprocessor
+ * parts cut'n'pasted from sa1100_ir.c (C) 2000 Russell King
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/time.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <asm/system.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <linux/fcntl.h>
+#ifdef LIRC_ON_SA1100
+#include <asm/hardware.h>
+#ifdef CONFIG_SA1100_COLLIE
+#include <asm/arch/tc35143.h>
+#include <asm/ucb1200.h>
+#endif
+#endif
+
+#include <linux/timer.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+/* SECTION: Definitions */
+
+/*** Tekram dongle ***/
+#ifdef LIRC_SIR_TEKRAM
+/* stolen from kernel source */
+/* definitions for Tekram dongle */
+#define TEKRAM_115200 0x00
+#define TEKRAM_57600 0x01
+#define TEKRAM_38400 0x02
+#define TEKRAM_19200 0x03
+#define TEKRAM_9600 0x04
+#define TEKRAM_2400 0x08
+
+#define TEKRAM_PW 0x10 /* Pulse select bit */
+
+/* 10bit * 1s/115200bit in milliseconds = 87ms*/
+#define TIME_CONST (10000000ul/115200ul)
+
+#endif
+
+#ifdef LIRC_SIR_ACTISYS_ACT200L
+static void init_act200(void);
+#elif defined(LIRC_SIR_ACTISYS_ACT220L)
+static void init_act220(void);
+#endif
+
+/*** SA1100 ***/
+#ifdef LIRC_ON_SA1100
+struct sa1100_ser2_registers {
+ /* HSSP control register */
+ unsigned char hscr0;
+ /* UART registers */
+ unsigned char utcr0;
+ unsigned char utcr1;
+ unsigned char utcr2;
+ unsigned char utcr3;
+ unsigned char utcr4;
+ unsigned char utdr;
+ unsigned char utsr0;
+ unsigned char utsr1;
+} sr;
+
+static int irq = IRQ_Ser2ICP;
+
+#define LIRC_ON_SA1100_TRANSMITTER_LATENCY 0
+
+/* pulse/space ratio of 50/50 */
+static unsigned long pulse_width = (13-LIRC_ON_SA1100_TRANSMITTER_LATENCY);
+/* 1000000/freq-pulse_width */
+static unsigned long space_width = (13-LIRC_ON_SA1100_TRANSMITTER_LATENCY);
+static unsigned int freq = 38000; /* modulation frequency */
+static unsigned int duty_cycle = 50; /* duty cycle of 50% */
+
+#endif
+
+#define RBUF_LEN 1024
+#define WBUF_LEN 1024
+
+#define LIRC_DRIVER_NAME "lirc_sir"
+
+#define PULSE '['
+
+#ifndef LIRC_SIR_TEKRAM
+/* 9bit * 1s/115200bit in milli seconds = 78.125ms*/
+#define TIME_CONST (9000000ul/115200ul)
+#endif
+
+
+/* timeout for sequences in jiffies (=5/100s), must be longer than TIME_CONST */
+#define SIR_TIMEOUT (HZ*5/100)
+
+#ifndef LIRC_ON_SA1100
+#ifndef LIRC_IRQ
+#define LIRC_IRQ 4
+#endif
+#ifndef LIRC_PORT
+/* for external dongles, default to com1 */
+#if defined(LIRC_SIR_ACTISYS_ACT200L) || \
+ defined(LIRC_SIR_ACTISYS_ACT220L) || \
+ defined(LIRC_SIR_TEKRAM)
+#define LIRC_PORT 0x3f8
+#else
+/* onboard sir ports are typically com3 */
+#define LIRC_PORT 0x3e8
+#endif
+#endif
+
+static int io = LIRC_PORT;
+static int irq = LIRC_IRQ;
+static int threshold = 3;
+#endif
+
+static DEFINE_SPINLOCK(timer_lock);
+static struct timer_list timerlist;
+/* time of last signal change detected */
+static struct timeval last_tv = {0, 0};
+/* time of last UART data ready interrupt */
+static struct timeval last_intr_tv = {0, 0};
+static int last_value;
+
+static DECLARE_WAIT_QUEUE_HEAD(lirc_read_queue);
+
+static DEFINE_SPINLOCK(hardware_lock);
+
+static int rx_buf[RBUF_LEN];
+static unsigned int rx_tail, rx_head;
+
+static int debug;
+#define dprintk(fmt, args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \
+ fmt, ## args); \
+ } while (0)
+
+/* SECTION: Prototypes */
+
+/* Communication with user-space */
+static unsigned int lirc_poll(struct file *file, poll_table *wait);
+static ssize_t lirc_read(struct file *file, char *buf, size_t count,
+ loff_t *ppos);
+static ssize_t lirc_write(struct file *file, const char *buf, size_t n,
+ loff_t *pos);
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
+static void add_read_queue(int flag, unsigned long val);
+static int init_chrdev(void);
+static void drop_chrdev(void);
+/* Hardware */
+static irqreturn_t sir_interrupt(int irq, void *dev_id);
+static void send_space(unsigned long len);
+static void send_pulse(unsigned long len);
+static int init_hardware(void);
+static void drop_hardware(void);
+/* Initialisation */
+static int init_port(void);
+static void drop_port(void);
+
+#ifdef LIRC_ON_SA1100
+static void on(void)
+{
+ PPSR |= PPC_TXD2;
+}
+
+static void off(void)
+{
+ PPSR &= ~PPC_TXD2;
+}
+#else
+static inline unsigned int sinp(int offset)
+{
+ return inb(io + offset);
+}
+
+static inline void soutp(int offset, int value)
+{
+ outb(value, io + offset);
+}
+#endif
+
+#ifndef MAX_UDELAY_MS
+#define MAX_UDELAY_US 5000
+#else
+#define MAX_UDELAY_US (MAX_UDELAY_MS*1000)
+#endif
+
+static void safe_udelay(unsigned long usecs)
+{
+ while (usecs > MAX_UDELAY_US) {
+ udelay(MAX_UDELAY_US);
+ usecs -= MAX_UDELAY_US;
+ }
+ udelay(usecs);
+}
+
+/* SECTION: Communication with user-space */
+
+static unsigned int lirc_poll(struct file *file, poll_table *wait)
+{
+ poll_wait(file, &lirc_read_queue, wait);
+ if (rx_head != rx_tail)
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static ssize_t lirc_read(struct file *file, char *buf, size_t count,
+ loff_t *ppos)
+{
+ int n = 0;
+ int retval = 0;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (count % sizeof(int))
+ return -EINVAL;
+
+ add_wait_queue(&lirc_read_queue, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ while (n < count) {
+ if (rx_head != rx_tail) {
+ if (copy_to_user((void *) buf + n,
+ (void *) (rx_buf + rx_head),
+ sizeof(int))) {
+ retval = -EFAULT;
+ break;
+ }
+ rx_head = (rx_head + 1) & (RBUF_LEN - 1);
+ n += sizeof(int);
+ } else {
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ break;
+ }
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
+ }
+ }
+ remove_wait_queue(&lirc_read_queue, &wait);
+ set_current_state(TASK_RUNNING);
+ return n ? n : retval;
+}
+static ssize_t lirc_write(struct file *file, const char *buf, size_t n,
+ loff_t *pos)
+{
+ unsigned long flags;
+ int i, count;
+ int *tx_buf;
+
+ count = n / sizeof(int);
+ if (n % sizeof(int) || count % 2 == 0)
+ return -EINVAL;
+ tx_buf = memdup_user(buf, n);
+ if (IS_ERR(tx_buf))
+ return PTR_ERR(tx_buf);
+ i = 0;
+#ifdef LIRC_ON_SA1100
+ /* disable receiver */
+ Ser2UTCR3 = 0;
+#endif
+ local_irq_save(flags);
+ while (1) {
+ if (i >= count)
+ break;
+ if (tx_buf[i])
+ send_pulse(tx_buf[i]);
+ i++;
+ if (i >= count)
+ break;
+ if (tx_buf[i])
+ send_space(tx_buf[i]);
+ i++;
+ }
+ local_irq_restore(flags);
+#ifdef LIRC_ON_SA1100
+ off();
+ udelay(1000); /* wait 1ms for IR diode to recover */
+ Ser2UTCR3 = 0;
+ /* clear status register to prevent unwanted interrupts */
+ Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+ /* enable receiver */
+ Ser2UTCR3 = UTCR3_RXE|UTCR3_RIE;
+#endif
+ return count;
+}
+
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+ int retval = 0;
+ unsigned long value = 0;
+#ifdef LIRC_ON_SA1100
+ unsigned int ivalue;
+
+ if (cmd == LIRC_GET_FEATURES)
+ value = LIRC_CAN_SEND_PULSE |
+ LIRC_CAN_SET_SEND_DUTY_CYCLE |
+ LIRC_CAN_SET_SEND_CARRIER |
+ LIRC_CAN_REC_MODE2;
+ else if (cmd == LIRC_GET_SEND_MODE)
+ value = LIRC_MODE_PULSE;
+ else if (cmd == LIRC_GET_REC_MODE)
+ value = LIRC_MODE_MODE2;
+#else
+ if (cmd == LIRC_GET_FEATURES)
+ value = LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2;
+ else if (cmd == LIRC_GET_SEND_MODE)
+ value = LIRC_MODE_PULSE;
+ else if (cmd == LIRC_GET_REC_MODE)
+ value = LIRC_MODE_MODE2;
+#endif
+
+ switch (cmd) {
+ case LIRC_GET_FEATURES:
+ case LIRC_GET_SEND_MODE:
+ case LIRC_GET_REC_MODE:
+ retval = put_user(value, (unsigned long *) arg);
+ break;
+
+ case LIRC_SET_SEND_MODE:
+ case LIRC_SET_REC_MODE:
+ retval = get_user(value, (unsigned long *) arg);
+ break;
+#ifdef LIRC_ON_SA1100
+ case LIRC_SET_SEND_DUTY_CYCLE:
+ retval = get_user(ivalue, (unsigned int *) arg);
+ if (retval)
+ return retval;
+ if (ivalue <= 0 || ivalue > 100)
+ return -EINVAL;
+ /* (ivalue/100)*(1000000/freq) */
+ duty_cycle = ivalue;
+ pulse_width = (unsigned long) duty_cycle*10000/freq;
+ space_width = (unsigned long) 1000000L/freq-pulse_width;
+ if (pulse_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
+ pulse_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
+ if (space_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
+ space_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
+ break;
+ case LIRC_SET_SEND_CARRIER:
+ retval = get_user(ivalue, (unsigned int *) arg);
+ if (retval)
+ return retval;
+ if (ivalue > 500000 || ivalue < 20000)
+ return -EINVAL;
+ freq = ivalue;
+ pulse_width = (unsigned long) duty_cycle*10000/freq;
+ space_width = (unsigned long) 1000000L/freq-pulse_width;
+ if (pulse_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
+ pulse_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
+ if (space_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
+ space_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
+ break;
+#endif
+ default:
+ retval = -ENOIOCTLCMD;
+
+ }
+
+ if (retval)
+ return retval;
+ if (cmd == LIRC_SET_REC_MODE) {
+ if (value != LIRC_MODE_MODE2)
+ retval = -ENOSYS;
+ } else if (cmd == LIRC_SET_SEND_MODE) {
+ if (value != LIRC_MODE_PULSE)
+ retval = -ENOSYS;
+ }
+
+ return retval;
+}
+
+static void add_read_queue(int flag, unsigned long val)
+{
+ unsigned int new_rx_tail;
+ int newval;
+
+ dprintk("add flag %d with val %lu\n", flag, val);
+
+ newval = val & PULSE_MASK;
+
+ /*
+ * statistically, pulses are ~TIME_CONST/2 too long. we could
+ * maybe make this more exact, but this is good enough
+ */
+ if (flag) {
+ /* pulse */
+ if (newval > TIME_CONST/2)
+ newval -= TIME_CONST/2;
+ else /* should not ever happen */
+ newval = 1;
+ newval |= PULSE_BIT;
+ } else {
+ newval += TIME_CONST/2;
+ }
+ new_rx_tail = (rx_tail + 1) & (RBUF_LEN - 1);
+ if (new_rx_tail == rx_head) {
+ dprintk("Buffer overrun.\n");
+ return;
+ }
+ rx_buf[rx_tail] = newval;
+ rx_tail = new_rx_tail;
+ wake_up_interruptible(&lirc_read_queue);
+}
+
+static const struct file_operations lirc_fops = {
+ .owner = THIS_MODULE,
+ .read = lirc_read,
+ .write = lirc_write,
+ .poll = lirc_poll,
+ .unlocked_ioctl = lirc_ioctl,
+ .open = lirc_dev_fop_open,
+ .release = lirc_dev_fop_close,
+};
+
+static int set_use_inc(void *data)
+{
+ return 0;
+}
+
+static void set_use_dec(void *data)
+{
+}
+
+static struct lirc_driver driver = {
+ .name = LIRC_DRIVER_NAME,
+ .minor = -1,
+ .code_length = 1,
+ .sample_rate = 0,
+ .data = NULL,
+ .add_to_buf = NULL,
+ .set_use_inc = set_use_inc,
+ .set_use_dec = set_use_dec,
+ .fops = &lirc_fops,
+ .dev = NULL,
+ .owner = THIS_MODULE,
+};
+
+
+static int init_chrdev(void)
+{
+ driver.minor = lirc_register_driver(&driver);
+ if (driver.minor < 0) {
+ printk(KERN_ERR LIRC_DRIVER_NAME ": init_chrdev() failed.\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+static void drop_chrdev(void)
+{
+ lirc_unregister_driver(driver.minor);
+}
+
+/* SECTION: Hardware */
+static long delta(struct timeval *tv1, struct timeval *tv2)
+{
+ unsigned long deltv;
+
+ deltv = tv2->tv_sec - tv1->tv_sec;
+ if (deltv > 15)
+ deltv = 0xFFFFFF;
+ else
+ deltv = deltv*1000000 +
+ tv2->tv_usec -
+ tv1->tv_usec;
+ return deltv;
+}
+
+static void sir_timeout(unsigned long data)
+{
+ /*
+ * if last received signal was a pulse, but receiving stopped
+ * within the 9 bit frame, we need to finish this pulse and
+ * simulate a signal change to from pulse to space. Otherwise
+ * upper layers will receive two sequences next time.
+ */
+
+ unsigned long flags;
+ unsigned long pulse_end;
+
+ /* avoid interference with interrupt */
+ spin_lock_irqsave(&timer_lock, flags);
+ if (last_value) {
+#ifndef LIRC_ON_SA1100
+ /* clear unread bits in UART and restart */
+ outb(UART_FCR_CLEAR_RCVR, io + UART_FCR);
+#endif
+ /* determine 'virtual' pulse end: */
+ pulse_end = delta(&last_tv, &last_intr_tv);
+ dprintk("timeout add %d for %lu usec\n", last_value, pulse_end);
+ add_read_queue(last_value, pulse_end);
+ last_value = 0;
+ last_tv = last_intr_tv;
+ }
+ spin_unlock_irqrestore(&timer_lock, flags);
+}
+
+static irqreturn_t sir_interrupt(int irq, void *dev_id)
+{
+ unsigned char data;
+ struct timeval curr_tv;
+ static unsigned long deltv;
+#ifdef LIRC_ON_SA1100
+ int status;
+ static int n;
+
+ status = Ser2UTSR0;
+ /*
+ * Deal with any receive errors first. The bytes in error may be
+ * the only bytes in the receive FIFO, so we do this first.
+ */
+ while (status & UTSR0_EIF) {
+ int bstat;
+
+ if (debug) {
+ dprintk("EIF\n");
+ bstat = Ser2UTSR1;
+
+ if (bstat & UTSR1_FRE)
+ dprintk("frame error\n");
+ if (bstat & UTSR1_ROR)
+ dprintk("receive fifo overrun\n");
+ if (bstat & UTSR1_PRE)
+ dprintk("parity error\n");
+ }
+
+ bstat = Ser2UTDR;
+ n++;
+ status = Ser2UTSR0;
+ }
+
+ if (status & (UTSR0_RFS | UTSR0_RID)) {
+ do_gettimeofday(&curr_tv);
+ deltv = delta(&last_tv, &curr_tv);
+ do {
+ data = Ser2UTDR;
+ dprintk("%d data: %u\n", n, (unsigned int) data);
+ n++;
+ } while (status & UTSR0_RID && /* do not empty fifo in order to
+ * get UTSR0_RID in any case */
+ Ser2UTSR1 & UTSR1_RNE); /* data ready */
+
+ if (status&UTSR0_RID) {
+ add_read_queue(0 , deltv - n * TIME_CONST); /*space*/
+ add_read_queue(1, n * TIME_CONST); /*pulse*/
+ n = 0;
+ last_tv = curr_tv;
+ }
+ }
+
+ if (status & UTSR0_TFS)
+ printk(KERN_ERR "transmit fifo not full, shouldn't happen\n");
+
+ /* We must clear certain bits. */
+ status &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+ if (status)
+ Ser2UTSR0 = status;
+#else
+ unsigned long deltintrtv;
+ unsigned long flags;
+ int iir, lsr;
+
+ while ((iir = inb(io + UART_IIR) & UART_IIR_ID)) {
+ switch (iir&UART_IIR_ID) { /* FIXME toto treba preriedit */
+ case UART_IIR_MSI:
+ (void) inb(io + UART_MSR);
+ break;
+ case UART_IIR_RLSI:
+ (void) inb(io + UART_LSR);
+ break;
+ case UART_IIR_THRI:
+#if 0
+ if (lsr & UART_LSR_THRE) /* FIFO is empty */
+ outb(data, io + UART_TX)
+#endif
+ break;
+ case UART_IIR_RDI:
+ /* avoid interference with timer */
+ spin_lock_irqsave(&timer_lock, flags);
+ do {
+ del_timer(&timerlist);
+ data = inb(io + UART_RX);
+ do_gettimeofday(&curr_tv);
+ deltv = delta(&last_tv, &curr_tv);
+ deltintrtv = delta(&last_intr_tv, &curr_tv);
+ dprintk("t %lu, d %d\n", deltintrtv, (int)data);
+ /*
+ * if nothing came in last X cycles,
+ * it was gap
+ */
+ if (deltintrtv > TIME_CONST * threshold) {
+ if (last_value) {
+ dprintk("GAP\n");
+ /* simulate signal change */
+ add_read_queue(last_value,
+ deltv -
+ deltintrtv);
+ last_value = 0;
+ last_tv.tv_sec =
+ last_intr_tv.tv_sec;
+ last_tv.tv_usec =
+ last_intr_tv.tv_usec;
+ deltv = deltintrtv;
+ }
+ }
+ data = 1;
+ if (data ^ last_value) {
+ /*
+ * deltintrtv > 2*TIME_CONST, remember?
+ * the other case is timeout
+ */
+ add_read_queue(last_value,
+ deltv-TIME_CONST);
+ last_value = data;
+ last_tv = curr_tv;
+ if (last_tv.tv_usec >= TIME_CONST) {
+ last_tv.tv_usec -= TIME_CONST;
+ } else {
+ last_tv.tv_sec--;
+ last_tv.tv_usec += 1000000 -
+ TIME_CONST;
+ }
+ }
+ last_intr_tv = curr_tv;
+ if (data) {
+ /*
+ * start timer for end of
+ * sequence detection
+ */
+ timerlist.expires = jiffies +
+ SIR_TIMEOUT;
+ add_timer(&timerlist);
+ }
+
+ lsr = inb(io + UART_LSR);
+ } while (lsr & UART_LSR_DR); /* data ready */
+ spin_unlock_irqrestore(&timer_lock, flags);
+ break;
+ default:
+ break;
+ }
+ }
+#endif
+ return IRQ_RETVAL(IRQ_HANDLED);
+}
+
+#ifdef LIRC_ON_SA1100
+static void send_pulse(unsigned long length)
+{
+ unsigned long k, delay;
+ int flag;
+
+ if (length == 0)
+ return;
+ /*
+ * this won't give us the carrier frequency we really want
+ * due to integer arithmetic, but we can accept this inaccuracy
+ */
+
+ for (k = flag = 0; k < length; k += delay, flag = !flag) {
+ if (flag) {
+ off();
+ delay = space_width;
+ } else {
+ on();
+ delay = pulse_width;
+ }
+ safe_udelay(delay);
+ }
+ off();
+}
+
+static void send_space(unsigned long length)
+{
+ if (length == 0)
+ return;
+ off();
+ safe_udelay(length);
+}
+#else
+static void send_space(unsigned long len)
+{
+ safe_udelay(len);
+}
+
+static void send_pulse(unsigned long len)
+{
+ long bytes_out = len / TIME_CONST;
+ long time_left;
+
+ time_left = (long)len - (long)bytes_out * (long)TIME_CONST;
+ if (bytes_out == 0) {
+ bytes_out++;
+ time_left = 0;
+ }
+ while (bytes_out--) {
+ outb(PULSE, io + UART_TX);
+ /* FIXME treba seriozne cakanie z char/serial.c */
+ while (!(inb(io + UART_LSR) & UART_LSR_THRE))
+ ;
+ }
+#if 0
+ if (time_left > 0)
+ safe_udelay(time_left);
+#endif
+}
+#endif
+
+#ifdef CONFIG_SA1100_COLLIE
+static int sa1100_irda_set_power_collie(int state)
+{
+ if (state) {
+ /*
+ * 0 - off
+ * 1 - short range, lowest power
+ * 2 - medium range, medium power
+ * 3 - maximum range, high power
+ */
+ ucb1200_set_io_direction(TC35143_GPIO_IR_ON,
+ TC35143_IODIR_OUTPUT);
+ ucb1200_set_io(TC35143_GPIO_IR_ON, TC35143_IODAT_LOW);
+ udelay(100);
+ } else {
+ /* OFF */
+ ucb1200_set_io_direction(TC35143_GPIO_IR_ON,
+ TC35143_IODIR_OUTPUT);
+ ucb1200_set_io(TC35143_GPIO_IR_ON, TC35143_IODAT_HIGH);
+ }
+ return 0;
+}
+#endif
+
+static int init_hardware(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hardware_lock, flags);
+ /* reset UART */
+#ifdef LIRC_ON_SA1100
+#ifdef CONFIG_SA1100_BITSY
+ if (machine_is_bitsy()) {
+ printk(KERN_INFO "Power on IR module\n");
+ set_bitsy_egpio(EGPIO_BITSY_IR_ON);
+ }
+#endif
+#ifdef CONFIG_SA1100_COLLIE
+ sa1100_irda_set_power_collie(3); /* power on */
+#endif
+ sr.hscr0 = Ser2HSCR0;
+
+ sr.utcr0 = Ser2UTCR0;
+ sr.utcr1 = Ser2UTCR1;
+ sr.utcr2 = Ser2UTCR2;
+ sr.utcr3 = Ser2UTCR3;
+ sr.utcr4 = Ser2UTCR4;
+
+ sr.utdr = Ser2UTDR;
+ sr.utsr0 = Ser2UTSR0;
+ sr.utsr1 = Ser2UTSR1;
+
+ /* configure GPIO */
+ /* output */
+ PPDR |= PPC_TXD2;
+ PSDR |= PPC_TXD2;
+ /* set output to 0 */
+ off();
+
+ /* Enable HP-SIR modulation, and ensure that the port is disabled. */
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = sr.hscr0 & (~HSCR0_HSSP);
+
+ /* clear status register to prevent unwanted interrupts */
+ Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+
+ /* 7N1 */
+ Ser2UTCR0 = UTCR0_1StpBit|UTCR0_7BitData;
+ /* 115200 */
+ Ser2UTCR1 = 0;
+ Ser2UTCR2 = 1;
+ /* use HPSIR, 1.6 usec pulses */
+ Ser2UTCR4 = UTCR4_HPSIR|UTCR4_Z1_6us;
+
+ /* enable receiver, receive fifo interrupt */
+ Ser2UTCR3 = UTCR3_RXE|UTCR3_RIE;
+
+ /* clear status register to prevent unwanted interrupts */
+ Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+
+#elif defined(LIRC_SIR_TEKRAM)
+ /* disable FIFO */
+ soutp(UART_FCR,
+ UART_FCR_CLEAR_RCVR|
+ UART_FCR_CLEAR_XMIT|
+ UART_FCR_TRIGGER_1);
+
+ /* Set DLAB 0. */
+ soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+ /* First of all, disable all interrupts */
+ soutp(UART_IER, sinp(UART_IER) &
+ (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
+
+ /* Set DLAB 1. */
+ soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
+
+ /* Set divisor to 12 => 9600 Baud */
+ soutp(UART_DLM, 0);
+ soutp(UART_DLL, 12);
+
+ /* Set DLAB 0. */
+ soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+ /* power supply */
+ soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+ safe_udelay(50*1000);
+
+ /* -DTR low -> reset PIC */
+ soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2);
+ udelay(1*1000);
+
+ soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+ udelay(100);
+
+
+ /* -RTS low -> send control byte */
+ soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2);
+ udelay(7);
+ soutp(UART_TX, TEKRAM_115200|TEKRAM_PW);
+
+ /* one byte takes ~1042 usec to transmit at 9600,8N1 */
+ udelay(1500);
+
+ /* back to normal operation */
+ soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+ udelay(50);
+
+ udelay(1500);
+
+ /* read previous control byte */
+ printk(KERN_INFO LIRC_DRIVER_NAME
+ ": 0x%02x\n", sinp(UART_RX));
+
+ /* Set DLAB 1. */
+ soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
+
+ /* Set divisor to 1 => 115200 Baud */
+ soutp(UART_DLM, 0);
+ soutp(UART_DLL, 1);
+
+ /* Set DLAB 0, 8 Bit */
+ soutp(UART_LCR, UART_LCR_WLEN8);
+ /* enable interrupts */
+ soutp(UART_IER, sinp(UART_IER)|UART_IER_RDI);
+#else
+ outb(0, io + UART_MCR);
+ outb(0, io + UART_IER);
+ /* init UART */
+ /* set DLAB, speed = 115200 */
+ outb(UART_LCR_DLAB | UART_LCR_WLEN7, io + UART_LCR);
+ outb(1, io + UART_DLL); outb(0, io + UART_DLM);
+ /* 7N1+start = 9 bits at 115200 ~ 3 bits at 44000 */
+ outb(UART_LCR_WLEN7, io + UART_LCR);
+ /* FIFO operation */
+ outb(UART_FCR_ENABLE_FIFO, io + UART_FCR);
+ /* interrupts */
+ /* outb(UART_IER_RLSI|UART_IER_RDI|UART_IER_THRI, io + UART_IER); */
+ outb(UART_IER_RDI, io + UART_IER);
+ /* turn on UART */
+ outb(UART_MCR_DTR|UART_MCR_RTS|UART_MCR_OUT2, io + UART_MCR);
+#ifdef LIRC_SIR_ACTISYS_ACT200L
+ init_act200();
+#elif defined(LIRC_SIR_ACTISYS_ACT220L)
+ init_act220();
+#endif
+#endif
+ spin_unlock_irqrestore(&hardware_lock, flags);
+ return 0;
+}
+
+static void drop_hardware(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hardware_lock, flags);
+
+#ifdef LIRC_ON_SA1100
+ Ser2UTCR3 = 0;
+
+ Ser2UTCR0 = sr.utcr0;
+ Ser2UTCR1 = sr.utcr1;
+ Ser2UTCR2 = sr.utcr2;
+ Ser2UTCR4 = sr.utcr4;
+ Ser2UTCR3 = sr.utcr3;
+
+ Ser2HSCR0 = sr.hscr0;
+#ifdef CONFIG_SA1100_BITSY
+ if (machine_is_bitsy())
+ clr_bitsy_egpio(EGPIO_BITSY_IR_ON);
+#endif
+#ifdef CONFIG_SA1100_COLLIE
+ sa1100_irda_set_power_collie(0); /* power off */
+#endif
+#else
+ /* turn off interrupts */
+ outb(0, io + UART_IER);
+#endif
+ spin_unlock_irqrestore(&hardware_lock, flags);
+}
+
+/* SECTION: Initialisation */
+
+static int init_port(void)
+{
+ int retval;
+
+ /* get I/O port access and IRQ line */
+#ifndef LIRC_ON_SA1100
+ if (request_region(io, 8, LIRC_DRIVER_NAME) == NULL) {
+ printk(KERN_ERR LIRC_DRIVER_NAME
+ ": i/o port 0x%.4x already in use.\n", io);
+ return -EBUSY;
+ }
+#endif
+ retval = request_irq(irq, sir_interrupt, IRQF_DISABLED,
+ LIRC_DRIVER_NAME, NULL);
+ if (retval < 0) {
+# ifndef LIRC_ON_SA1100
+ release_region(io, 8);
+# endif
+ printk(KERN_ERR LIRC_DRIVER_NAME
+ ": IRQ %d already in use.\n",
+ irq);
+ return retval;
+ }
+#ifndef LIRC_ON_SA1100
+ printk(KERN_INFO LIRC_DRIVER_NAME
+ ": I/O port 0x%.4x, IRQ %d.\n",
+ io, irq);
+#endif
+
+ init_timer(&timerlist);
+ timerlist.function = sir_timeout;
+ timerlist.data = 0xabadcafe;
+
+ return 0;
+}
+
+static void drop_port(void)
+{
+ free_irq(irq, NULL);
+ del_timer_sync(&timerlist);
+#ifndef LIRC_ON_SA1100
+ release_region(io, 8);
+#endif
+}
+
+#ifdef LIRC_SIR_ACTISYS_ACT200L
+/* Crystal/Cirrus CS8130 IR transceiver, used in Actisys Act200L dongle */
+/* some code borrowed from Linux IRDA driver */
+
+/* Register 0: Control register #1 */
+#define ACT200L_REG0 0x00
+#define ACT200L_TXEN 0x01 /* Enable transmitter */
+#define ACT200L_RXEN 0x02 /* Enable receiver */
+#define ACT200L_ECHO 0x08 /* Echo control chars */
+
+/* Register 1: Control register #2 */
+#define ACT200L_REG1 0x10
+#define ACT200L_LODB 0x01 /* Load new baud rate count value */
+#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
+
+/* Register 3: Transmit mode register #2 */
+#define ACT200L_REG3 0x30
+#define ACT200L_B0 0x01 /* DataBits, 0=6, 1=7, 2=8, 3=9(8P) */
+#define ACT200L_B1 0x02 /* DataBits, 0=6, 1=7, 2=8, 3=9(8P) */
+#define ACT200L_CHSY 0x04 /* StartBit Synced 0=bittime, 1=startbit */
+
+/* Register 4: Output Power register */
+#define ACT200L_REG4 0x40
+#define ACT200L_OP0 0x01 /* Enable LED1C output */
+#define ACT200L_OP1 0x02 /* Enable LED2C output */
+#define ACT200L_BLKR 0x04
+
+/* Register 5: Receive Mode register */
+#define ACT200L_REG5 0x50
+#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
+ /*.. other various IRDA bit modes, and TV remote modes..*/
+
+/* Register 6: Receive Sensitivity register #1 */
+#define ACT200L_REG6 0x60
+#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
+#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
+
+/* Register 7: Receive Sensitivity register #2 */
+#define ACT200L_REG7 0x70
+#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
+
+/* Register 8,9: Baud Rate Divider register #1,#2 */
+#define ACT200L_REG8 0x80
+#define ACT200L_REG9 0x90
+
+#define ACT200L_2400 0x5f
+#define ACT200L_9600 0x17
+#define ACT200L_19200 0x0b
+#define ACT200L_38400 0x05
+#define ACT200L_57600 0x03
+#define ACT200L_115200 0x01
+
+/* Register 13: Control register #3 */
+#define ACT200L_REG13 0xd0
+#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
+
+/* Register 15: Status register */
+#define ACT200L_REG15 0xf0
+
+/* Register 21: Control register #4 */
+#define ACT200L_REG21 0x50
+#define ACT200L_EXCK 0x02 /* Disable clock output driver */
+#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
+
+static void init_act200(void)
+{
+ int i;
+ __u8 control[] = {
+ ACT200L_REG15,
+ ACT200L_REG13 | ACT200L_SHDW,
+ ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
+ ACT200L_REG13,
+ ACT200L_REG7 | ACT200L_ENPOS,
+ ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1,
+ ACT200L_REG5 | ACT200L_RWIDL,
+ ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR,
+ ACT200L_REG3 | ACT200L_B0,
+ ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN,
+ ACT200L_REG8 | (ACT200L_115200 & 0x0f),
+ ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f),
+ ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE
+ };
+
+ /* Set DLAB 1. */
+ soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
+
+ /* Set divisor to 12 => 9600 Baud */
+ soutp(UART_DLM, 0);
+ soutp(UART_DLL, 12);
+
+ /* Set DLAB 0. */
+ soutp(UART_LCR, UART_LCR_WLEN8);
+ /* Set divisor to 12 => 9600 Baud */
+
+ /* power supply */
+ soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+ for (i = 0; i < 50; i++)
+ safe_udelay(1000);
+
+ /* Reset the dongle : set RTS low for 25 ms */
+ soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2);
+ for (i = 0; i < 25; i++)
+ udelay(1000);
+
+ soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+ udelay(100);
+
+ /* Clear DTR and set RTS to enter command mode */
+ soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2);
+ udelay(7);
+
+ /* send out the control register settings for 115K 7N1 SIR operation */
+ for (i = 0; i < sizeof(control); i++) {
+ soutp(UART_TX, control[i]);
+ /* one byte takes ~1042 usec to transmit at 9600,8N1 */
+ udelay(1500);
+ }
+
+ /* back to normal operation */
+ soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+ udelay(50);
+
+ udelay(1500);
+ soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
+
+ /* Set DLAB 1. */
+ soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN7);
+
+ /* Set divisor to 1 => 115200 Baud */
+ soutp(UART_DLM, 0);
+ soutp(UART_DLL, 1);
+
+ /* Set DLAB 0. */
+ soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+ /* Set DLAB 0, 7 Bit */
+ soutp(UART_LCR, UART_LCR_WLEN7);
+
+ /* enable interrupts */
+ soutp(UART_IER, sinp(UART_IER)|UART_IER_RDI);
+}
+#endif
+
+#ifdef LIRC_SIR_ACTISYS_ACT220L
+/*
+ * Derived from linux IrDA driver (net/irda/actisys.c)
+ * Drop me a mail for any kind of comment: maxx@spaceboyz.net
+ */
+
+void init_act220(void)
+{
+ int i;
+
+ /* DLAB 1 */
+ soutp(UART_LCR, UART_LCR_DLAB|UART_LCR_WLEN7);
+
+ /* 9600 baud */
+ soutp(UART_DLM, 0);
+ soutp(UART_DLL, 12);
+
+ /* DLAB 0 */
+ soutp(UART_LCR, UART_LCR_WLEN7);
+
+ /* reset the dongle, set DTR low for 10us */
+ soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2);
+ udelay(10);
+
+ /* back to normal (still 9600) */
+ soutp(UART_MCR, UART_MCR_DTR|UART_MCR_RTS|UART_MCR_OUT2);
+
+ /*
+ * send RTS pulses until we reach 115200
+ * i hope this is really the same for act220l/act220l+
+ */
+ for (i = 0; i < 3; i++) {
+ udelay(10);
+ /* set RTS low for 10 us */
+ soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2);
+ udelay(10);
+ /* set RTS high for 10 us */
+ soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+ }
+
+ /* back to normal operation */
+ udelay(1500); /* better safe than sorry ;) */
+
+ /* Set DLAB 1. */
+ soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN7);
+
+ /* Set divisor to 1 => 115200 Baud */
+ soutp(UART_DLM, 0);
+ soutp(UART_DLL, 1);
+
+ /* Set DLAB 0, 7 Bit */
+ /* The dongle doesn't seem to have any problems with operation at 7N1 */
+ soutp(UART_LCR, UART_LCR_WLEN7);
+
+ /* enable interrupts */
+ soutp(UART_IER, UART_IER_RDI);
+}
+#endif
+
+static int init_lirc_sir(void)
+{
+ int retval;
+
+ init_waitqueue_head(&lirc_read_queue);
+ retval = init_port();
+ if (retval < 0)
+ return retval;
+ init_hardware();
+ printk(KERN_INFO LIRC_DRIVER_NAME
+ ": Installed.\n");
+ return 0;
+}
+
+
+static int __init lirc_sir_init(void)
+{
+ int retval;
+
+ retval = init_chrdev();
+ if (retval < 0)
+ return retval;
+ retval = init_lirc_sir();
+ if (retval) {
+ drop_chrdev();
+ return retval;
+ }
+ return 0;
+}
+
+static void __exit lirc_sir_exit(void)
+{
+ drop_hardware();
+ drop_chrdev();
+ drop_port();
+ printk(KERN_INFO LIRC_DRIVER_NAME ": Uninstalled.\n");
+}
+
+module_init(lirc_sir_init);
+module_exit(lirc_sir_exit);
+
+#ifdef LIRC_SIR_TEKRAM
+MODULE_DESCRIPTION("Infrared receiver driver for Tekram Irmate 210");
+MODULE_AUTHOR("Christoph Bartelmus");
+#elif defined(LIRC_ON_SA1100)
+MODULE_DESCRIPTION("LIRC driver for StrongARM SA1100 embedded microprocessor");
+MODULE_AUTHOR("Christoph Bartelmus");
+#elif defined(LIRC_SIR_ACTISYS_ACT200L)
+MODULE_DESCRIPTION("LIRC driver for Actisys Act200L");
+MODULE_AUTHOR("Karl Bongers");
+#elif defined(LIRC_SIR_ACTISYS_ACT220L)
+MODULE_DESCRIPTION("LIRC driver for Actisys Act220L(+)");
+MODULE_AUTHOR("Jan Roemisch");
+#else
+MODULE_DESCRIPTION("Infrared receiver driver for SIR type serial ports");
+MODULE_AUTHOR("Milan Pikula");
+#endif
+MODULE_LICENSE("GPL");
+
+#ifdef LIRC_ON_SA1100
+module_param(irq, int, S_IRUGO);
+MODULE_PARM_DESC(irq, "Interrupt (16)");
+#else
+module_param(io, int, S_IRUGO);
+MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");
+
+module_param(irq, int, S_IRUGO);
+MODULE_PARM_DESC(irq, "Interrupt (4 or 3)");
+
+module_param(threshold, int, S_IRUGO);
+MODULE_PARM_DESC(threshold, "space detection threshold (3)");
+#endif
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/staging/lirc/lirc_ttusbir.c b/drivers/staging/lirc/lirc_ttusbir.c
new file mode 100644
index 0000000..e345ab9
--- /dev/null
+++ b/drivers/staging/lirc/lirc_ttusbir.c
@@ -0,0 +1,396 @@
+/*
+ * lirc_ttusbir.c
+ *
+ * lirc_ttusbir - LIRC device driver for the TechnoTrend USB IR Receiver
+ *
+ * Copyright (C) 2007 Stefan Macher <st_maker-lirc@yahoo.de>
+ *
+ * This LIRC driver provides access to the TechnoTrend USB IR Receiver.
+ * The receiver delivers the IR signal as raw sampled true/false data in
+ * isochronous USB packets each of size 128 byte.
+ * Currently the driver reduces the sampling rate by factor of 8 as this
+ * is still more than enough to decode RC-5 - others should be analyzed.
+ * But the driver does not rely on RC-5 it should be able to decode every
+ * IR signal that is not too fast.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+MODULE_DESCRIPTION("TechnoTrend USB IR device driver for LIRC");
+MODULE_AUTHOR("Stefan Macher (st_maker-lirc@yahoo.de)");
+MODULE_LICENSE("GPL");
+
+/* #define DEBUG */
+#ifdef DEBUG
+#define DPRINTK printk
+#else
+#define DPRINTK(_x_, a...)
+#endif
+
+/* function declarations */
+static int probe(struct usb_interface *intf, const struct usb_device_id *id);
+static void disconnect(struct usb_interface *intf);
+static void urb_complete(struct urb *urb);
+static int set_use_inc(void *data);
+static void set_use_dec(void *data);
+
+static int num_urbs = 2;
+module_param(num_urbs, int, S_IRUGO);
+MODULE_PARM_DESC(num_urbs,
+ "Number of URBs in queue. Try to increase to 4 in case "
+ "of problems (default: 2; minimum: 2)");
+
+/* table of devices that work with this driver */
+static struct usb_device_id device_id_table[] = {
+ /* TechnoTrend USB IR Receiver */
+ { USB_DEVICE(0x0B48, 0x2003) },
+ /* Terminating entry */
+ { }
+};
+MODULE_DEVICE_TABLE(usb, device_id_table);
+
+/* USB driver definition */
+static struct usb_driver usb_driver = {
+ .name = "TTUSBIR",
+ .id_table = &(device_id_table[0]),
+ .probe = probe,
+ .disconnect = disconnect,
+};
+
+/* USB device definition */
+struct ttusbir_device {
+ struct usb_driver *usb_driver;
+ struct usb_device *udev;
+ struct usb_interface *interf;
+ struct usb_class_driver class_driver;
+ unsigned int ifnum; /* Interface number to use */
+ unsigned int alt_setting; /* alternate setting to use */
+ unsigned int endpoint; /* Endpoint to use */
+ struct urb **urb; /* num_urb URB pointers*/
+ char **buffer; /* 128 byte buffer for each URB */
+ struct lirc_buffer rbuf; /* Buffer towards LIRC */
+ struct lirc_driver driver;
+ int minor;
+ int last_pulse; /* remembers if last received byte was pulse or space */
+ int last_num; /* remembers how many last bytes appeared */
+ int opened;
+};
+
+/*** LIRC specific functions ***/
+static int set_use_inc(void *data)
+{
+ int i, retval;
+ struct ttusbir_device *ttusbir = data;
+
+ DPRINTK("Sending first URBs\n");
+ /* @TODO Do I need to check if I am already opened */
+ ttusbir->opened = 1;
+
+ for (i = 0; i < num_urbs; i++) {
+ retval = usb_submit_urb(ttusbir->urb[i], GFP_KERNEL);
+ if (retval) {
+ err("%s: usb_submit_urb failed on urb %d",
+ __func__, i);
+ return retval;
+ }
+ }
+ return 0;
+}
+
+static void set_use_dec(void *data)
+{
+ struct ttusbir_device *ttusbir = data;
+
+ DPRINTK("Device closed\n");
+
+ ttusbir->opened = 0;
+}
+
+/*** USB specific functions ***/
+
+/*
+ * This mapping table is used to do a very simple filtering of the
+ * input signal.
+ * For a value with at least 4 bits set it returns 0xFF otherwise
+ * 0x00. For faster IR signals this can not be used. But for RC-5 we
+ * still have about 14 samples per pulse/space, i.e. we sample with 14
+ * times higher frequency than the signal frequency
+ */
+const unsigned char map_table[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+ 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+ 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+ 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+ 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+ 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+ 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+ 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+ 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+ 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
+};
+
+static void urb_complete(struct urb *urb)
+{
+ struct ttusbir_device *ttusbir;
+ unsigned char *buf;
+ int i;
+ int l;
+
+ ttusbir = urb->context;
+
+ if (!ttusbir->opened)
+ return;
+
+ buf = (unsigned char *)urb->transfer_buffer;
+
+ for (i = 0; i < 128; i++) {
+ /* Here we do the filtering and some kind of down sampling */
+ buf[i] = ~map_table[buf[i]];
+ if (ttusbir->last_pulse == buf[i]) {
+ if (ttusbir->last_num < PULSE_MASK/63)
+ ttusbir->last_num++;
+ /*
+ * else we are in a idle period and do not need to
+ * increment any longer
+ */
+ } else {
+ l = ttusbir->last_num * 62; /* about 62 = us/byte */
+ if (ttusbir->last_pulse) /* pulse or space? */
+ l |= PULSE_BIT;
+ if (!lirc_buffer_full(&ttusbir->rbuf)) {
+ lirc_buffer_write(&ttusbir->rbuf, (void *)&l);
+ wake_up_interruptible(&ttusbir->rbuf.wait_poll);
+ }
+ ttusbir->last_num = 0;
+ ttusbir->last_pulse = buf[i];
+ }
+ }
+ usb_submit_urb(urb, GFP_ATOMIC); /* keep data rolling :-) */
+}
+
+/*
+ * Called whenever the USB subsystem thinks we could be the right driver
+ * to handle this device
+ */
+static int probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ int alt_set, endp;
+ int found = 0;
+ int i, j;
+ int struct_size;
+ struct usb_host_interface *host_interf;
+ struct usb_interface_descriptor *interf_desc;
+ struct usb_host_endpoint *host_endpoint;
+ struct ttusbir_device *ttusbir;
+
+ DPRINTK("Module ttusbir probe\n");
+
+ /* To reduce memory fragmentation we use only one allocation */
+ struct_size = sizeof(struct ttusbir_device) +
+ (sizeof(struct urb *) * num_urbs) +
+ (sizeof(char *) * num_urbs) +
+ (num_urbs * 128);
+ ttusbir = kzalloc(struct_size, GFP_KERNEL);
+ if (!ttusbir)
+ return -ENOMEM;
+
+ ttusbir->urb = (struct urb **)((char *)ttusbir +
+ sizeof(struct ttusbir_device));
+ ttusbir->buffer = (char **)((char *)ttusbir->urb +
+ (sizeof(struct urb *) * num_urbs));
+ for (i = 0; i < num_urbs; i++)
+ ttusbir->buffer[i] = (char *)ttusbir->buffer +
+ (sizeof(char *)*num_urbs) + (i * 128);
+
+ ttusbir->usb_driver = &usb_driver;
+ ttusbir->alt_setting = -1;
+ /* @TODO check if error can be returned */
+ ttusbir->udev = usb_get_dev(interface_to_usbdev(intf));
+ ttusbir->interf = intf;
+ ttusbir->last_pulse = 0x00;
+ ttusbir->last_num = 0;
+
+ /*
+ * Now look for interface setting we can handle
+ * We are searching for the alt setting where end point
+ * 0x82 has max packet size 16
+ */
+ for (alt_set = 0; alt_set < intf->num_altsetting && !found; alt_set++) {
+ host_interf = &intf->altsetting[alt_set];
+ interf_desc = &host_interf->desc;
+ for (endp = 0; endp < interf_desc->bNumEndpoints; endp++) {
+ host_endpoint = &host_interf->endpoint[endp];
+ if ((host_endpoint->desc.bEndpointAddress == 0x82) &&
+ (host_endpoint->desc.wMaxPacketSize == 0x10)) {
+ ttusbir->alt_setting = alt_set;
+ ttusbir->endpoint = endp;
+ found = 1;
+ break;
+ }
+ }
+ }
+ if (ttusbir->alt_setting != -1)
+ DPRINTK("alt setting: %d\n", ttusbir->alt_setting);
+ else {
+ err("Could not find alternate setting\n");
+ kfree(ttusbir);
+ return -EINVAL;
+ }
+
+ /* OK lets setup this interface setting */
+ usb_set_interface(ttusbir->udev, 0, ttusbir->alt_setting);
+
+ /* Store device info in interface structure */
+ usb_set_intfdata(intf, ttusbir);
+
+ /* Register as a LIRC driver */
+ if (lirc_buffer_init(&ttusbir->rbuf, sizeof(int), 256) < 0) {
+ err("Could not get memory for LIRC data buffer\n");
+ usb_set_intfdata(intf, NULL);
+ kfree(ttusbir);
+ return -ENOMEM;
+ }
+ strcpy(ttusbir->driver.name, "TTUSBIR");
+ ttusbir->driver.minor = -1;
+ ttusbir->driver.code_length = 1;
+ ttusbir->driver.sample_rate = 0;
+ ttusbir->driver.data = ttusbir;
+ ttusbir->driver.add_to_buf = NULL;
+ ttusbir->driver.rbuf = &ttusbir->rbuf;
+ ttusbir->driver.set_use_inc = set_use_inc;
+ ttusbir->driver.set_use_dec = set_use_dec;
+ ttusbir->driver.dev = &intf->dev;
+ ttusbir->driver.owner = THIS_MODULE;
+ ttusbir->driver.features = LIRC_CAN_REC_MODE2;
+ ttusbir->minor = lirc_register_driver(&ttusbir->driver);
+ if (ttusbir->minor < 0) {
+ err("Error registering as LIRC driver\n");
+ usb_set_intfdata(intf, NULL);
+ lirc_buffer_free(&ttusbir->rbuf);
+ kfree(ttusbir);
+ return -EIO;
+ }
+
+ /* Allocate and setup the URB that we will use to talk to the device */
+ for (i = 0; i < num_urbs; i++) {
+ ttusbir->urb[i] = usb_alloc_urb(8, GFP_KERNEL);
+ if (!ttusbir->urb[i]) {
+ err("Could not allocate memory for the URB\n");
+ for (j = i - 1; j >= 0; j--)
+ kfree(ttusbir->urb[j]);
+ lirc_buffer_free(&ttusbir->rbuf);
+ lirc_unregister_driver(ttusbir->minor);
+ kfree(ttusbir);
+ usb_set_intfdata(intf, NULL);
+ return -ENOMEM;
+ }
+ ttusbir->urb[i]->dev = ttusbir->udev;
+ ttusbir->urb[i]->context = ttusbir;
+ ttusbir->urb[i]->pipe = usb_rcvisocpipe(ttusbir->udev,
+ ttusbir->endpoint);
+ ttusbir->urb[i]->interval = 1;
+ ttusbir->urb[i]->transfer_flags = URB_ISO_ASAP;
+ ttusbir->urb[i]->transfer_buffer = &ttusbir->buffer[i][0];
+ ttusbir->urb[i]->complete = urb_complete;
+ ttusbir->urb[i]->number_of_packets = 8;
+ ttusbir->urb[i]->transfer_buffer_length = 128;
+ for (j = 0; j < 8; j++) {
+ ttusbir->urb[i]->iso_frame_desc[j].offset = j*16;
+ ttusbir->urb[i]->iso_frame_desc[j].length = 16;
+ }
+ }
+ return 0;
+}
+
+/**
+ * Called when the driver is unloaded or the device is unplugged
+ */
+static void disconnect(struct usb_interface *intf)
+{
+ int i;
+ struct ttusbir_device *ttusbir;
+
+ DPRINTK("Module ttusbir disconnect\n");
+
+ ttusbir = (struct ttusbir_device *) usb_get_intfdata(intf);
+ usb_set_intfdata(intf, NULL);
+ lirc_unregister_driver(ttusbir->minor);
+ DPRINTK("unregistered\n");
+
+ for (i = 0; i < num_urbs; i++) {
+ usb_kill_urb(ttusbir->urb[i]);
+ usb_free_urb(ttusbir->urb[i]);
+ }
+ DPRINTK("URBs killed\n");
+ lirc_buffer_free(&ttusbir->rbuf);
+ kfree(ttusbir);
+}
+
+static int ttusbir_init_module(void)
+{
+ int result;
+
+ DPRINTK(KERN_DEBUG "Module ttusbir init\n");
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&usb_driver);
+ if (result)
+ err("usb_register failed. Error number %d", result);
+ return result;
+}
+
+static void ttusbir_exit_module(void)
+{
+ printk(KERN_DEBUG "Module ttusbir exit\n");
+ usb_deregister(&usb_driver);
+}
+
+module_init(ttusbir_init_module);
+module_exit(ttusbir_exit_module);
diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c
new file mode 100644
index 0000000..100caab
--- /dev/null
+++ b/drivers/staging/lirc/lirc_zilog.c
@@ -0,0 +1,1387 @@
+/*
+ * i2c IR lirc driver for devices with zilog IR processors
+ *
+ * Copyright (c) 2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
+ * modified for PixelView (BT878P+W/FM) by
+ * Michal Kochanowicz <mkochano@pld.org.pl>
+ * Christoph Bartelmus <lirc@bartelmus.de>
+ * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by
+ * Ulrich Mueller <ulrich.mueller42@web.de>
+ * modified for Asus TV-Box and Creative/VisionTek BreakOut-Box by
+ * Stefan Jahn <stefan@lkcc.org>
+ * modified for inclusion into kernel sources by
+ * Jerome Brock <jbrock@users.sourceforge.net>
+ * modified for Leadtek Winfast PVR2000 by
+ * Thomas Reitmayr (treitmayr@yahoo.com)
+ * modified for Hauppauge PVR-150 IR TX device by
+ * Mark Weaver <mark@npsl.co.uk>
+ * changed name from lirc_pvr150 to lirc_zilog, works on more than pvr-150
+ * Jarod Wilson <jarod@redhat.com>
+ *
+ * parts are cut&pasted from the lirc_i2c.c driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/firmware.h>
+#include <linux/vmalloc.h>
+
+#include <linux/mutex.h>
+#include <linux/kthread.h>
+
+#include <media/lirc_dev.h>
+#include <media/lirc.h>
+
+struct IR {
+ struct lirc_driver l;
+
+ /* Device info */
+ struct mutex ir_lock;
+ int open;
+
+ /* RX device */
+ struct i2c_client c_rx;
+ int have_rx;
+
+ /* RX device buffer & lock */
+ struct lirc_buffer buf;
+ struct mutex buf_lock;
+
+ /* RX polling thread data */
+ struct completion *t_notify;
+ struct completion *t_notify2;
+ int shutdown;
+ struct task_struct *task;
+
+ /* RX read data */
+ unsigned char b[3];
+
+ /* TX device */
+ struct i2c_client c_tx;
+ int need_boot;
+ int have_tx;
+};
+
+/* Minor -> data mapping */
+static struct IR *ir_devices[MAX_IRCTL_DEVICES];
+
+/* Block size for IR transmitter */
+#define TX_BLOCK_SIZE 99
+
+/* Hauppauge IR transmitter data */
+struct tx_data_struct {
+ /* Boot block */
+ unsigned char *boot_data;
+
+ /* Start of binary data block */
+ unsigned char *datap;
+
+ /* End of binary data block */
+ unsigned char *endp;
+
+ /* Number of installed codesets */
+ unsigned int num_code_sets;
+
+ /* Pointers to codesets */
+ unsigned char **code_sets;
+
+ /* Global fixed data template */
+ int fixed[TX_BLOCK_SIZE];
+};
+
+static struct tx_data_struct *tx_data;
+static struct mutex tx_data_lock;
+
+#define zilog_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, \
+ ## args)
+#define zilog_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args)
+
+#define ZILOG_HAUPPAUGE_IR_RX_NAME "Zilog/Hauppauge IR RX"
+#define ZILOG_HAUPPAUGE_IR_TX_NAME "Zilog/Hauppauge IR TX"
+
+/* module parameters */
+static int debug; /* debug output */
+static int disable_rx; /* disable RX device */
+static int disable_tx; /* disable TX device */
+static int minor = -1; /* minor number */
+
+#define dprintk(fmt, args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG KBUILD_MODNAME ": " fmt, \
+ ## args); \
+ } while (0)
+
+static int add_to_buf(struct IR *ir)
+{
+ __u16 code;
+ unsigned char codes[2];
+ unsigned char keybuf[6];
+ int got_data = 0;
+ int ret;
+ int failures = 0;
+ unsigned char sendbuf[1] = { 0 };
+
+ if (lirc_buffer_full(&ir->buf)) {
+ dprintk("buffer overflow\n");
+ return -EOVERFLOW;
+ }
+
+ /*
+ * service the device as long as it is returning
+ * data and we have space
+ */
+ do {
+ /*
+ * Lock i2c bus for the duration. RX/TX chips interfere so
+ * this is worth it
+ */
+ mutex_lock(&ir->ir_lock);
+
+ /*
+ * Send random "poll command" (?) Windows driver does this
+ * and it is a good point to detect chip failure.
+ */
+ ret = i2c_master_send(&ir->c_rx, sendbuf, 1);
+ if (ret != 1) {
+ zilog_error("i2c_master_send failed with %d\n", ret);
+ if (failures >= 3) {
+ mutex_unlock(&ir->ir_lock);
+ zilog_error("unable to read from the IR chip "
+ "after 3 resets, giving up\n");
+ return ret;
+ }
+
+ /* Looks like the chip crashed, reset it */
+ zilog_error("polling the IR receiver chip failed, "
+ "trying reset\n");
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout((100 * HZ + 999) / 1000);
+ ir->need_boot = 1;
+
+ ++failures;
+ mutex_unlock(&ir->ir_lock);
+ continue;
+ }
+
+ ret = i2c_master_recv(&ir->c_rx, keybuf, sizeof(keybuf));
+ mutex_unlock(&ir->ir_lock);
+ if (ret != sizeof(keybuf)) {
+ zilog_error("i2c_master_recv failed with %d -- "
+ "keeping last read buffer\n", ret);
+ } else {
+ ir->b[0] = keybuf[3];
+ ir->b[1] = keybuf[4];
+ ir->b[2] = keybuf[5];
+ dprintk("key (0x%02x/0x%02x)\n", ir->b[0], ir->b[1]);
+ }
+
+ /* key pressed ? */
+#ifdef I2C_HW_B_HDPVR
+ if (ir->c_rx.adapter->id == I2C_HW_B_HDPVR) {
+ if (got_data && (keybuf[0] == 0x80))
+ return 0;
+ else if (got_data && (keybuf[0] == 0x00))
+ return -ENODATA;
+ } else if ((ir->b[0] & 0x80) == 0)
+#else
+ if ((ir->b[0] & 0x80) == 0)
+#endif
+ return got_data ? 0 : -ENODATA;
+
+ /* look what we have */
+ code = (((__u16)ir->b[0] & 0x7f) << 6) | (ir->b[1] >> 2);
+
+ codes[0] = (code >> 8) & 0xff;
+ codes[1] = code & 0xff;
+
+ /* return it */
+ lirc_buffer_write(&ir->buf, codes);
+ ++got_data;
+ } while (!lirc_buffer_full(&ir->buf));
+
+ return 0;
+}
+
+/*
+ * Main function of the polling thread -- from lirc_dev.
+ * We don't fit the LIRC model at all anymore. This is horrible, but
+ * basically we have a single RX/TX device with a nasty failure mode
+ * that needs to be accounted for across the pair. lirc lets us provide
+ * fops, but prevents us from using the internal polling, etc. if we do
+ * so. Hence the replication. Might be neater to extend the LIRC model
+ * to account for this but I'd think it's a very special case of seriously
+ * messed up hardware.
+ */
+static int lirc_thread(void *arg)
+{
+ struct IR *ir = arg;
+
+ if (ir->t_notify != NULL)
+ complete(ir->t_notify);
+
+ dprintk("poll thread started\n");
+
+ do {
+ if (ir->open) {
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ /*
+ * This is ~113*2 + 24 + jitter (2*repeat gap +
+ * code length). We use this interval as the chip
+ * resets every time you poll it (bad!). This is
+ * therefore just sufficient to catch all of the
+ * button presses. It makes the remote much more
+ * responsive. You can see the difference by
+ * running irw and holding down a button. With
+ * 100ms, the old polling interval, you'll notice
+ * breaks in the repeat sequence corresponding to
+ * lost keypresses.
+ */
+ schedule_timeout((260 * HZ) / 1000);
+ if (ir->shutdown)
+ break;
+ if (!add_to_buf(ir))
+ wake_up_interruptible(&ir->buf.wait_poll);
+ } else {
+ /* if device not opened so we can sleep half a second */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ/2);
+ }
+ } while (!ir->shutdown);
+
+ if (ir->t_notify2 != NULL)
+ wait_for_completion(ir->t_notify2);
+
+ ir->task = NULL;
+ if (ir->t_notify != NULL)
+ complete(ir->t_notify);
+
+ dprintk("poll thread ended\n");
+ return 0;
+}
+
+static int set_use_inc(void *data)
+{
+ struct IR *ir = data;
+
+ if (ir->l.owner == NULL || try_module_get(ir->l.owner) == 0)
+ return -ENODEV;
+
+ /* lock bttv in memory while /dev/lirc is in use */
+ /*
+ * this is completely broken code. lirc_unregister_driver()
+ * must be possible even when the device is open
+ */
+ if (ir->c_rx.addr)
+ i2c_use_client(&ir->c_rx);
+ if (ir->c_tx.addr)
+ i2c_use_client(&ir->c_tx);
+
+ return 0;
+}
+
+static void set_use_dec(void *data)
+{
+ struct IR *ir = data;
+
+ if (ir->c_rx.addr)
+ i2c_release_client(&ir->c_rx);
+ if (ir->c_tx.addr)
+ i2c_release_client(&ir->c_tx);
+ if (ir->l.owner != NULL)
+ module_put(ir->l.owner);
+}
+
+/* safe read of a uint32 (always network byte order) */
+static int read_uint32(unsigned char **data,
+ unsigned char *endp, unsigned int *val)
+{
+ if (*data + 4 > endp)
+ return 0;
+ *val = ((*data)[0] << 24) | ((*data)[1] << 16) |
+ ((*data)[2] << 8) | (*data)[3];
+ *data += 4;
+ return 1;
+}
+
+/* safe read of a uint8 */
+static int read_uint8(unsigned char **data,
+ unsigned char *endp, unsigned char *val)
+{
+ if (*data + 1 > endp)
+ return 0;
+ *val = *((*data)++);
+ return 1;
+}
+
+/* safe skipping of N bytes */
+static int skip(unsigned char **data,
+ unsigned char *endp, unsigned int distance)
+{
+ if (*data + distance > endp)
+ return 0;
+ *data += distance;
+ return 1;
+}
+
+/* decompress key data into the given buffer */
+static int get_key_data(unsigned char *buf,
+ unsigned int codeset, unsigned int key)
+{
+ unsigned char *data, *endp, *diffs, *key_block;
+ unsigned char keys, ndiffs, id;
+ unsigned int base, lim, pos, i;
+
+ /* Binary search for the codeset */
+ for (base = 0, lim = tx_data->num_code_sets; lim; lim >>= 1) {
+ pos = base + (lim >> 1);
+ data = tx_data->code_sets[pos];
+
+ if (!read_uint32(&data, tx_data->endp, &i))
+ goto corrupt;
+
+ if (i == codeset)
+ break;
+ else if (codeset > i) {
+ base = pos + 1;
+ --lim;
+ }
+ }
+ /* Not found? */
+ if (!lim)
+ return -EPROTO;
+
+ /* Set end of data block */
+ endp = pos < tx_data->num_code_sets - 1 ?
+ tx_data->code_sets[pos + 1] : tx_data->endp;
+
+ /* Read the block header */
+ if (!read_uint8(&data, endp, &keys) ||
+ !read_uint8(&data, endp, &ndiffs) ||
+ ndiffs > TX_BLOCK_SIZE || keys == 0)
+ goto corrupt;
+
+ /* Save diffs & skip */
+ diffs = data;
+ if (!skip(&data, endp, ndiffs))
+ goto corrupt;
+
+ /* Read the id of the first key */
+ if (!read_uint8(&data, endp, &id))
+ goto corrupt;
+
+ /* Unpack the first key's data */
+ for (i = 0; i < TX_BLOCK_SIZE; ++i) {
+ if (tx_data->fixed[i] == -1) {
+ if (!read_uint8(&data, endp, &buf[i]))
+ goto corrupt;
+ } else {
+ buf[i] = (unsigned char)tx_data->fixed[i];
+ }
+ }
+
+ /* Early out key found/not found */
+ if (key == id)
+ return 0;
+ if (keys == 1)
+ return -EPROTO;
+
+ /* Sanity check */
+ key_block = data;
+ if (!skip(&data, endp, (keys - 1) * (ndiffs + 1)))
+ goto corrupt;
+
+ /* Binary search for the key */
+ for (base = 0, lim = keys - 1; lim; lim >>= 1) {
+ /* Seek to block */
+ unsigned char *key_data;
+ pos = base + (lim >> 1);
+ key_data = key_block + (ndiffs + 1) * pos;
+
+ if (*key_data == key) {
+ /* skip key id */
+ ++key_data;
+
+ /* found, so unpack the diffs */
+ for (i = 0; i < ndiffs; ++i) {
+ unsigned char val;
+ if (!read_uint8(&key_data, endp, &val) ||
+ diffs[i] >= TX_BLOCK_SIZE)
+ goto corrupt;
+ buf[diffs[i]] = val;
+ }
+
+ return 0;
+ } else if (key > *key_data) {
+ base = pos + 1;
+ --lim;
+ }
+ }
+ /* Key not found */
+ return -EPROTO;
+
+corrupt:
+ zilog_error("firmware is corrupt\n");
+ return -EFAULT;
+}
+
+/* send a block of data to the IR TX device */
+static int send_data_block(struct IR *ir, unsigned char *data_block)
+{
+ int i, j, ret;
+ unsigned char buf[5];
+
+ for (i = 0; i < TX_BLOCK_SIZE;) {
+ int tosend = TX_BLOCK_SIZE - i;
+ if (tosend > 4)
+ tosend = 4;
+ buf[0] = (unsigned char)(i + 1);
+ for (j = 0; j < tosend; ++j)
+ buf[1 + j] = data_block[i + j];
+ dprintk("%02x %02x %02x %02x %02x",
+ buf[0], buf[1], buf[2], buf[3], buf[4]);
+ ret = i2c_master_send(&ir->c_tx, buf, tosend + 1);
+ if (ret != tosend + 1) {
+ zilog_error("i2c_master_send failed with %d\n", ret);
+ return ret < 0 ? ret : -EFAULT;
+ }
+ i += tosend;
+ }
+ return 0;
+}
+
+/* send boot data to the IR TX device */
+static int send_boot_data(struct IR *ir)
+{
+ int ret;
+ unsigned char buf[4];
+
+ /* send the boot block */
+ ret = send_data_block(ir, tx_data->boot_data);
+ if (ret != 0)
+ return ret;
+
+ /* kick it off? */
+ buf[0] = 0x00;
+ buf[1] = 0x20;
+ ret = i2c_master_send(&ir->c_tx, buf, 2);
+ if (ret != 2) {
+ zilog_error("i2c_master_send failed with %d\n", ret);
+ return ret < 0 ? ret : -EFAULT;
+ }
+ ret = i2c_master_send(&ir->c_tx, buf, 1);
+ if (ret != 1) {
+ zilog_error("i2c_master_send failed with %d\n", ret);
+ return ret < 0 ? ret : -EFAULT;
+ }
+
+ /* Here comes the firmware version... (hopefully) */
+ ret = i2c_master_recv(&ir->c_tx, buf, 4);
+ if (ret != 4) {
+ zilog_error("i2c_master_recv failed with %d\n", ret);
+ return 0;
+ }
+ if (buf[0] != 0x80) {
+ zilog_error("unexpected IR TX response: %02x\n", buf[0]);
+ return 0;
+ }
+ zilog_notify("Zilog/Hauppauge IR blaster firmware version "
+ "%d.%d.%d loaded\n", buf[1], buf[2], buf[3]);
+
+ return 0;
+}
+
+/* unload "firmware", lock held */
+static void fw_unload_locked(void)
+{
+ if (tx_data) {
+ if (tx_data->code_sets)
+ vfree(tx_data->code_sets);
+
+ if (tx_data->datap)
+ vfree(tx_data->datap);
+
+ vfree(tx_data);
+ tx_data = NULL;
+ dprintk("successfully unloaded IR blaster firmware\n");
+ }
+}
+
+/* unload "firmware" for the IR TX device */
+static void fw_unload(void)
+{
+ mutex_lock(&tx_data_lock);
+ fw_unload_locked();
+ mutex_unlock(&tx_data_lock);
+}
+
+/* load "firmware" for the IR TX device */
+static int fw_load(struct IR *ir)
+{
+ int ret;
+ unsigned int i;
+ unsigned char *data, version, num_global_fixed;
+ const struct firmware *fw_entry;
+
+ /* Already loaded? */
+ mutex_lock(&tx_data_lock);
+ if (tx_data) {
+ ret = 0;
+ goto out;
+ }
+
+ /* Request codeset data file */
+ ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &ir->c_tx.dev);
+ if (ret != 0) {
+ zilog_error("firmware haup-ir-blaster.bin not available "
+ "(%d)\n", ret);
+ ret = ret < 0 ? ret : -EFAULT;
+ goto out;
+ }
+ dprintk("firmware of size %zu loaded\n", fw_entry->size);
+
+ /* Parse the file */
+ tx_data = vmalloc(sizeof(*tx_data));
+ if (tx_data == NULL) {
+ zilog_error("out of memory\n");
+ release_firmware(fw_entry);
+ ret = -ENOMEM;
+ goto out;
+ }
+ tx_data->code_sets = NULL;
+
+ /* Copy the data so hotplug doesn't get confused and timeout */
+ tx_data->datap = vmalloc(fw_entry->size);
+ if (tx_data->datap == NULL) {
+ zilog_error("out of memory\n");
+ release_firmware(fw_entry);
+ vfree(tx_data);
+ ret = -ENOMEM;
+ goto out;
+ }
+ memcpy(tx_data->datap, fw_entry->data, fw_entry->size);
+ tx_data->endp = tx_data->datap + fw_entry->size;
+ release_firmware(fw_entry); fw_entry = NULL;
+
+ /* Check version */
+ data = tx_data->datap;
+ if (!read_uint8(&data, tx_data->endp, &version))
+ goto corrupt;
+ if (version != 1) {
+ zilog_error("unsupported code set file version (%u, expected"
+ "1) -- please upgrade to a newer driver",
+ version);
+ fw_unload_locked();
+ ret = -EFAULT;
+ goto out;
+ }
+
+ /* Save boot block for later */
+ tx_data->boot_data = data;
+ if (!skip(&data, tx_data->endp, TX_BLOCK_SIZE))
+ goto corrupt;
+
+ if (!read_uint32(&data, tx_data->endp,
+ &tx_data->num_code_sets))
+ goto corrupt;
+
+ dprintk("%u IR blaster codesets loaded\n", tx_data->num_code_sets);
+
+ tx_data->code_sets = vmalloc(
+ tx_data->num_code_sets * sizeof(char *));
+ if (tx_data->code_sets == NULL) {
+ fw_unload_locked();
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ for (i = 0; i < TX_BLOCK_SIZE; ++i)
+ tx_data->fixed[i] = -1;
+
+ /* Read global fixed data template */
+ if (!read_uint8(&data, tx_data->endp, &num_global_fixed) ||
+ num_global_fixed > TX_BLOCK_SIZE)
+ goto corrupt;
+ for (i = 0; i < num_global_fixed; ++i) {
+ unsigned char pos, val;
+ if (!read_uint8(&data, tx_data->endp, &pos) ||
+ !read_uint8(&data, tx_data->endp, &val) ||
+ pos >= TX_BLOCK_SIZE)
+ goto corrupt;
+ tx_data->fixed[pos] = (int)val;
+ }
+
+ /* Filch out the position of each code set */
+ for (i = 0; i < tx_data->num_code_sets; ++i) {
+ unsigned int id;
+ unsigned char keys;
+ unsigned char ndiffs;
+
+ /* Save the codeset position */
+ tx_data->code_sets[i] = data;
+
+ /* Read header */
+ if (!read_uint32(&data, tx_data->endp, &id) ||
+ !read_uint8(&data, tx_data->endp, &keys) ||
+ !read_uint8(&data, tx_data->endp, &ndiffs) ||
+ ndiffs > TX_BLOCK_SIZE || keys == 0)
+ goto corrupt;
+
+ /* skip diff positions */
+ if (!skip(&data, tx_data->endp, ndiffs))
+ goto corrupt;
+
+ /*
+ * After the diffs we have the first key id + data -
+ * global fixed
+ */
+ if (!skip(&data, tx_data->endp,
+ 1 + TX_BLOCK_SIZE - num_global_fixed))
+ goto corrupt;
+
+ /* Then we have keys-1 blocks of key id+diffs */
+ if (!skip(&data, tx_data->endp,
+ (ndiffs + 1) * (keys - 1)))
+ goto corrupt;
+ }
+ ret = 0;
+ goto out;
+
+corrupt:
+ zilog_error("firmware is corrupt\n");
+ fw_unload_locked();
+ ret = -EFAULT;
+
+out:
+ mutex_unlock(&tx_data_lock);
+ return ret;
+}
+
+/* initialise the IR TX device */
+static int tx_init(struct IR *ir)
+{
+ int ret;
+
+ /* Load 'firmware' */
+ ret = fw_load(ir);
+ if (ret != 0)
+ return ret;
+
+ /* Send boot block */
+ ret = send_boot_data(ir);
+ if (ret != 0)
+ return ret;
+ ir->need_boot = 0;
+
+ /* Looks good */
+ return 0;
+}
+
+/* do nothing stub to make LIRC happy */
+static loff_t lseek(struct file *filep, loff_t offset, int orig)
+{
+ return -ESPIPE;
+}
+
+/* copied from lirc_dev */
+static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos)
+{
+ struct IR *ir = (struct IR *)filep->private_data;
+ unsigned char buf[ir->buf.chunk_size];
+ int ret = 0, written = 0;
+ DECLARE_WAITQUEUE(wait, current);
+
+ dprintk("read called\n");
+ if (ir->c_rx.addr == 0)
+ return -ENODEV;
+
+ if (mutex_lock_interruptible(&ir->buf_lock))
+ return -ERESTARTSYS;
+
+ if (n % ir->buf.chunk_size) {
+ dprintk("read result = -EINVAL\n");
+ mutex_unlock(&ir->buf_lock);
+ return -EINVAL;
+ }
+
+ /*
+ * we add ourselves to the task queue before buffer check
+ * to avoid losing scan code (in case when queue is awaken somewhere
+ * between while condition checking and scheduling)
+ */
+ add_wait_queue(&ir->buf.wait_poll, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ /*
+ * while we didn't provide 'length' bytes, device is opened in blocking
+ * mode and 'copy_to_user' is happy, wait for data.
+ */
+ while (written < n && ret == 0) {
+ if (lirc_buffer_empty(&ir->buf)) {
+ /*
+ * According to the read(2) man page, 'written' can be
+ * returned as less than 'n', instead of blocking
+ * again, returning -EWOULDBLOCK, or returning
+ * -ERESTARTSYS
+ */
+ if (written)
+ break;
+ if (filep->f_flags & O_NONBLOCK) {
+ ret = -EWOULDBLOCK;
+ break;
+ }
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
+ } else {
+ lirc_buffer_read(&ir->buf, buf);
+ ret = copy_to_user((void *)outbuf+written, buf,
+ ir->buf.chunk_size);
+ written += ir->buf.chunk_size;
+ }
+ }
+
+ remove_wait_queue(&ir->buf.wait_poll, &wait);
+ set_current_state(TASK_RUNNING);
+ mutex_unlock(&ir->buf_lock);
+
+ dprintk("read result = %s (%d)\n",
+ ret ? "-EFAULT" : "OK", ret);
+
+ return ret ? ret : written;
+}
+
+/* send a keypress to the IR TX device */
+static int send_code(struct IR *ir, unsigned int code, unsigned int key)
+{
+ unsigned char data_block[TX_BLOCK_SIZE];
+ unsigned char buf[2];
+ int i, ret;
+
+ /* Get data for the codeset/key */
+ ret = get_key_data(data_block, code, key);
+
+ if (ret == -EPROTO) {
+ zilog_error("failed to get data for code %u, key %u -- check "
+ "lircd.conf entries\n", code, key);
+ return ret;
+ } else if (ret != 0)
+ return ret;
+
+ /* Send the data block */
+ ret = send_data_block(ir, data_block);
+ if (ret != 0)
+ return ret;
+
+ /* Send data block length? */
+ buf[0] = 0x00;
+ buf[1] = 0x40;
+ ret = i2c_master_send(&ir->c_tx, buf, 2);
+ if (ret != 2) {
+ zilog_error("i2c_master_send failed with %d\n", ret);
+ return ret < 0 ? ret : -EFAULT;
+ }
+ ret = i2c_master_send(&ir->c_tx, buf, 1);
+ if (ret != 1) {
+ zilog_error("i2c_master_send failed with %d\n", ret);
+ return ret < 0 ? ret : -EFAULT;
+ }
+
+ /* Send finished download? */
+ ret = i2c_master_recv(&ir->c_tx, buf, 1);
+ if (ret != 1) {
+ zilog_error("i2c_master_recv failed with %d\n", ret);
+ return ret < 0 ? ret : -EFAULT;
+ }
+ if (buf[0] != 0xA0) {
+ zilog_error("unexpected IR TX response #1: %02x\n",
+ buf[0]);
+ return -EFAULT;
+ }
+
+ /* Send prepare command? */
+ buf[0] = 0x00;
+ buf[1] = 0x80;
+ ret = i2c_master_send(&ir->c_tx, buf, 2);
+ if (ret != 2) {
+ zilog_error("i2c_master_send failed with %d\n", ret);
+ return ret < 0 ? ret : -EFAULT;
+ }
+
+#ifdef I2C_HW_B_HDPVR
+ /*
+ * The sleep bits aren't necessary on the HD PVR, and in fact, the
+ * last i2c_master_recv always fails with a -5, so for now, we're
+ * going to skip this whole mess and say we're done on the HD PVR
+ */
+ if (ir->c_rx.adapter->id == I2C_HW_B_HDPVR)
+ goto done;
+#endif
+
+ /*
+ * This bit NAKs until the device is ready, so we retry it
+ * sleeping a bit each time. This seems to be what the windows
+ * driver does, approximately.
+ * Try for up to 1s.
+ */
+ for (i = 0; i < 20; ++i) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout((50 * HZ + 999) / 1000);
+ ret = i2c_master_send(&ir->c_tx, buf, 1);
+ if (ret == 1)
+ break;
+ dprintk("NAK expected: i2c_master_send "
+ "failed with %d (try %d)\n", ret, i+1);
+ }
+ if (ret != 1) {
+ zilog_error("IR TX chip never got ready: last i2c_master_send "
+ "failed with %d\n", ret);
+ return ret < 0 ? ret : -EFAULT;
+ }
+
+ /* Seems to be an 'ok' response */
+ i = i2c_master_recv(&ir->c_tx, buf, 1);
+ if (i != 1) {
+ zilog_error("i2c_master_recv failed with %d\n", ret);
+ return -EFAULT;
+ }
+ if (buf[0] != 0x80) {
+ zilog_error("unexpected IR TX response #2: %02x\n", buf[0]);
+ return -EFAULT;
+ }
+
+done:
+ /* Oh good, it worked */
+ dprintk("sent code %u, key %u\n", code, key);
+ return 0;
+}
+
+/*
+ * Write a code to the device. We take in a 32-bit number (an int) and then
+ * decode this to a codeset/key index. The key data is then decompressed and
+ * sent to the device. We have a spin lock as per i2c documentation to prevent
+ * multiple concurrent sends which would probably cause the device to explode.
+ */
+static ssize_t write(struct file *filep, const char *buf, size_t n,
+ loff_t *ppos)
+{
+ struct IR *ir = (struct IR *)filep->private_data;
+ size_t i;
+ int failures = 0;
+
+ if (ir->c_tx.addr == 0)
+ return -ENODEV;
+
+ /* Validate user parameters */
+ if (n % sizeof(int))
+ return -EINVAL;
+
+ /* Lock i2c bus for the duration */
+ mutex_lock(&ir->ir_lock);
+
+ /* Send each keypress */
+ for (i = 0; i < n;) {
+ int ret = 0;
+ int command;
+
+ if (copy_from_user(&command, buf + i, sizeof(command))) {
+ mutex_unlock(&ir->ir_lock);
+ return -EFAULT;
+ }
+
+ /* Send boot data first if required */
+ if (ir->need_boot == 1) {
+ ret = send_boot_data(ir);
+ if (ret == 0)
+ ir->need_boot = 0;
+ }
+
+ /* Send the code */
+ if (ret == 0) {
+ ret = send_code(ir, (unsigned)command >> 16,
+ (unsigned)command & 0xFFFF);
+ if (ret == -EPROTO) {
+ mutex_unlock(&ir->ir_lock);
+ return ret;
+ }
+ }
+
+ /*
+ * Hmm, a failure. If we've had a few then give up, otherwise
+ * try a reset
+ */
+ if (ret != 0) {
+ /* Looks like the chip crashed, reset it */
+ zilog_error("sending to the IR transmitter chip "
+ "failed, trying reset\n");
+
+ if (failures >= 3) {
+ zilog_error("unable to send to the IR chip "
+ "after 3 resets, giving up\n");
+ mutex_unlock(&ir->ir_lock);
+ return ret;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout((100 * HZ + 999) / 1000);
+ ir->need_boot = 1;
+ ++failures;
+ } else
+ i += sizeof(int);
+ }
+
+ /* Release i2c bus */
+ mutex_unlock(&ir->ir_lock);
+
+ /* All looks good */
+ return n;
+}
+
+/* copied from lirc_dev */
+static unsigned int poll(struct file *filep, poll_table *wait)
+{
+ struct IR *ir = (struct IR *)filep->private_data;
+ unsigned int ret;
+
+ dprintk("poll called\n");
+ if (ir->c_rx.addr == 0)
+ return -ENODEV;
+
+ mutex_lock(&ir->buf_lock);
+
+ poll_wait(filep, &ir->buf.wait_poll, wait);
+
+ dprintk("poll result = %s\n",
+ lirc_buffer_empty(&ir->buf) ? "0" : "POLLIN|POLLRDNORM");
+
+ ret = lirc_buffer_empty(&ir->buf) ? 0 : (POLLIN|POLLRDNORM);
+
+ mutex_unlock(&ir->buf_lock);
+ return ret;
+}
+
+static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+ struct IR *ir = (struct IR *)filep->private_data;
+ int result;
+ unsigned long mode, features = 0;
+
+ if (ir->c_rx.addr != 0)
+ features |= LIRC_CAN_REC_LIRCCODE;
+ if (ir->c_tx.addr != 0)
+ features |= LIRC_CAN_SEND_PULSE;
+
+ switch (cmd) {
+ case LIRC_GET_LENGTH:
+ result = put_user((unsigned long)13,
+ (unsigned long *)arg);
+ break;
+ case LIRC_GET_FEATURES:
+ result = put_user(features, (unsigned long *) arg);
+ break;
+ case LIRC_GET_REC_MODE:
+ if (!(features&LIRC_CAN_REC_MASK))
+ return -ENOSYS;
+
+ result = put_user(LIRC_REC2MODE
+ (features&LIRC_CAN_REC_MASK),
+ (unsigned long *)arg);
+ break;
+ case LIRC_SET_REC_MODE:
+ if (!(features&LIRC_CAN_REC_MASK))
+ return -ENOSYS;
+
+ result = get_user(mode, (unsigned long *)arg);
+ if (!result && !(LIRC_MODE2REC(mode) & features))
+ result = -EINVAL;
+ break;
+ case LIRC_GET_SEND_MODE:
+ if (!(features&LIRC_CAN_SEND_MASK))
+ return -ENOSYS;
+
+ result = put_user(LIRC_MODE_PULSE, (unsigned long *) arg);
+ break;
+ case LIRC_SET_SEND_MODE:
+ if (!(features&LIRC_CAN_SEND_MASK))
+ return -ENOSYS;
+
+ result = get_user(mode, (unsigned long *) arg);
+ if (!result && mode != LIRC_MODE_PULSE)
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return result;
+}
+
+/*
+ * Open the IR device. Get hold of our IR structure and
+ * stash it in private_data for the file
+ */
+static int open(struct inode *node, struct file *filep)
+{
+ struct IR *ir;
+ int ret;
+
+ /* find our IR struct */
+ unsigned minor = MINOR(node->i_rdev);
+ if (minor >= MAX_IRCTL_DEVICES) {
+ dprintk("minor %d: open result = -ENODEV\n",
+ minor);
+ return -ENODEV;
+ }
+ ir = ir_devices[minor];
+
+ /* increment in use count */
+ mutex_lock(&ir->ir_lock);
+ ++ir->open;
+ ret = set_use_inc(ir);
+ if (ret != 0) {
+ --ir->open;
+ mutex_unlock(&ir->ir_lock);
+ return ret;
+ }
+ mutex_unlock(&ir->ir_lock);
+
+ /* stash our IR struct */
+ filep->private_data = ir;
+
+ return 0;
+}
+
+/* Close the IR device */
+static int close(struct inode *node, struct file *filep)
+{
+ /* find our IR struct */
+ struct IR *ir = (struct IR *)filep->private_data;
+ if (ir == NULL) {
+ zilog_error("close: no private_data attached to the file!\n");
+ return -ENODEV;
+ }
+
+ /* decrement in use count */
+ mutex_lock(&ir->ir_lock);
+ --ir->open;
+ set_use_dec(ir);
+ mutex_unlock(&ir->ir_lock);
+
+ return 0;
+}
+
+static struct lirc_driver lirc_template = {
+ .name = "lirc_zilog",
+ .set_use_inc = set_use_inc,
+ .set_use_dec = set_use_dec,
+ .owner = THIS_MODULE
+};
+
+static int ir_remove(struct i2c_client *client);
+static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id);
+static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg);
+
+static const struct i2c_device_id ir_transceiver_id[] = {
+ /* Generic entry for any IR transceiver */
+ { "ir_video", 0 },
+ /* IR device specific entries should be added here */
+ { "ir_tx_z8f0811_haup", 0 },
+ { "ir_rx_z8f0811_haup", 0 },
+ { }
+};
+
+static struct i2c_driver driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "Zilog/Hauppauge i2c IR",
+ },
+ .probe = ir_probe,
+ .remove = ir_remove,
+ .command = ir_command,
+ .id_table = ir_transceiver_id,
+};
+
+static const struct file_operations lirc_fops = {
+ .owner = THIS_MODULE,
+ .llseek = lseek,
+ .read = read,
+ .write = write,
+ .poll = poll,
+ .unlocked_ioctl = ioctl,
+ .open = open,
+ .release = close
+};
+
+static int ir_remove(struct i2c_client *client)
+{
+ struct IR *ir = i2c_get_clientdata(client);
+
+ mutex_lock(&ir->ir_lock);
+
+ if (ir->have_rx || ir->have_tx) {
+ DECLARE_COMPLETION(tn);
+ DECLARE_COMPLETION(tn2);
+
+ /* end up polling thread */
+ if (ir->task && !IS_ERR(ir->task)) {
+ ir->t_notify = &tn;
+ ir->t_notify2 = &tn2;
+ ir->shutdown = 1;
+ wake_up_process(ir->task);
+ complete(&tn2);
+ wait_for_completion(&tn);
+ ir->t_notify = NULL;
+ ir->t_notify2 = NULL;
+ }
+
+ } else {
+ mutex_unlock(&ir->ir_lock);
+ zilog_error("%s: detached from something we didn't "
+ "attach to\n", __func__);
+ return -ENODEV;
+ }
+
+ /* unregister lirc driver */
+ if (ir->l.minor >= 0 && ir->l.minor < MAX_IRCTL_DEVICES) {
+ lirc_unregister_driver(ir->l.minor);
+ ir_devices[ir->l.minor] = NULL;
+ }
+
+ /* free memory */
+ lirc_buffer_free(&ir->buf);
+ mutex_unlock(&ir->ir_lock);
+ kfree(ir);
+
+ return 0;
+}
+
+static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct IR *ir = NULL;
+ struct i2c_adapter *adap = client->adapter;
+ char buf;
+ int ret;
+ int have_rx = 0, have_tx = 0;
+
+ dprintk("%s: adapter id=0x%x, client addr=0x%02x\n",
+ __func__, adap->id, client->addr);
+
+ /*
+ * The external IR receiver is at i2c address 0x71.
+ * The IR transmitter is at 0x70.
+ */
+ client->addr = 0x70;
+
+ if (!disable_tx) {
+ if (i2c_master_recv(client, &buf, 1) == 1)
+ have_tx = 1;
+ dprintk("probe 0x70 @ %s: %s\n",
+ adap->name, have_tx ? "success" : "failed");
+ }
+
+ if (!disable_rx) {
+ client->addr = 0x71;
+ if (i2c_master_recv(client, &buf, 1) == 1)
+ have_rx = 1;
+ dprintk("probe 0x71 @ %s: %s\n",
+ adap->name, have_rx ? "success" : "failed");
+ }
+
+ if (!(have_rx || have_tx)) {
+ zilog_error("%s: no devices found\n", adap->name);
+ goto out_nodev;
+ }
+
+ printk(KERN_INFO "lirc_zilog: chip found with %s\n",
+ have_rx && have_tx ? "RX and TX" :
+ have_rx ? "RX only" : "TX only");
+
+ ir = kzalloc(sizeof(struct IR), GFP_KERNEL);
+
+ if (!ir)
+ goto out_nomem;
+
+ ret = lirc_buffer_init(&ir->buf, 2, BUFLEN / 2);
+ if (ret)
+ goto out_nomem;
+
+ mutex_init(&ir->ir_lock);
+ mutex_init(&ir->buf_lock);
+ ir->need_boot = 1;
+
+ memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver));
+ ir->l.minor = -1;
+
+ /* I2C attach to device */
+ i2c_set_clientdata(client, ir);
+
+ /* initialise RX device */
+ if (have_rx) {
+ DECLARE_COMPLETION(tn);
+ memcpy(&ir->c_rx, client, sizeof(struct i2c_client));
+
+ ir->c_rx.addr = 0x71;
+ strlcpy(ir->c_rx.name, ZILOG_HAUPPAUGE_IR_RX_NAME,
+ I2C_NAME_SIZE);
+
+ /* try to fire up polling thread */
+ ir->t_notify = &tn;
+ ir->task = kthread_run(lirc_thread, ir, "lirc_zilog");
+ if (IS_ERR(ir->task)) {
+ ret = PTR_ERR(ir->task);
+ zilog_error("lirc_register_driver: cannot run "
+ "poll thread %d\n", ret);
+ goto err;
+ }
+ wait_for_completion(&tn);
+ ir->t_notify = NULL;
+ ir->have_rx = 1;
+ }
+
+ /* initialise TX device */
+ if (have_tx) {
+ memcpy(&ir->c_tx, client, sizeof(struct i2c_client));
+ ir->c_tx.addr = 0x70;
+ strlcpy(ir->c_tx.name, ZILOG_HAUPPAUGE_IR_TX_NAME,
+ I2C_NAME_SIZE);
+ ir->have_tx = 1;
+ }
+
+ /* set lirc_dev stuff */
+ ir->l.code_length = 13;
+ ir->l.rbuf = &ir->buf;
+ ir->l.fops = &lirc_fops;
+ ir->l.data = ir;
+ ir->l.minor = minor;
+ ir->l.dev = &adap->dev;
+ ir->l.sample_rate = 0;
+
+ /* register with lirc */
+ ir->l.minor = lirc_register_driver(&ir->l);
+ if (ir->l.minor < 0 || ir->l.minor >= MAX_IRCTL_DEVICES) {
+ zilog_error("ir_attach: \"minor\" must be between 0 and %d "
+ "(%d)!\n", MAX_IRCTL_DEVICES-1, ir->l.minor);
+ ret = -EBADRQC;
+ goto err;
+ }
+
+ /* store this for getting back in open() later on */
+ ir_devices[ir->l.minor] = ir;
+
+ /*
+ * if we have the tx device, load the 'firmware'. We do this
+ * after registering with lirc as otherwise hotplug seems to take
+ * 10s to create the lirc device.
+ */
+ if (have_tx) {
+ /* Special TX init */
+ ret = tx_init(ir);
+ if (ret != 0)
+ goto err;
+ }
+
+ return 0;
+
+err:
+ /* undo everything, hopefully... */
+ if (ir->c_rx.addr)
+ ir_remove(&ir->c_rx);
+ if (ir->c_tx.addr)
+ ir_remove(&ir->c_tx);
+ return ret;
+
+out_nodev:
+ zilog_error("no device found\n");
+ return -ENODEV;
+
+out_nomem:
+ zilog_error("memory allocation failure\n");
+ kfree(ir);
+ return -ENOMEM;
+}
+
+static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+ /* nothing */
+ return 0;
+}
+
+static int __init zilog_init(void)
+{
+ int ret;
+
+ zilog_notify("Zilog/Hauppauge IR driver initializing\n");
+
+ mutex_init(&tx_data_lock);
+
+ request_module("firmware_class");
+
+ ret = i2c_add_driver(&driver);
+ if (ret)
+ zilog_error("initialization failed\n");
+ else
+ zilog_notify("initialization complete\n");
+
+ return ret;
+}
+
+static void __exit zilog_exit(void)
+{
+ i2c_del_driver(&driver);
+ /* if loaded */
+ fw_unload();
+ zilog_notify("Zilog/Hauppauge IR driver unloaded\n");
+}
+
+module_init(zilog_init);
+module_exit(zilog_exit);
+
+MODULE_DESCRIPTION("Zilog/Hauppauge infrared transmitter driver (i2c stack)");
+MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, "
+ "Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver");
+MODULE_LICENSE("GPL");
+/* for compat with old name, which isn't all that accurate anymore */
+MODULE_ALIAS("lirc_pvr150");
+
+module_param(minor, int, 0444);
+MODULE_PARM_DESC(minor, "Preferred minor device number");
+
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
+
+module_param(disable_rx, bool, 0644);
+MODULE_PARM_DESC(disable_rx, "Disable the IR receiver device");
+
+module_param(disable_tx, bool, 0644);
+MODULE_PARM_DESC(disable_tx, "Disable the IR transmitter device");