Documentation/input/appleir.txt | 46 ++++
drivers/hid/hid-apple.c | 4 -
drivers/hid/hid-core.c | 5 +-
drivers/hid/hid-ids.h | 1 +
drivers/input/misc/Kconfig | 13 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/appleir.c | 477 +++++++++++++++++++++++++++++++++++++++
7 files changed, 541 insertions(+), 6 deletions(-)
create mode 100644 Documentation/input/appleir.txt
create mode 100644 drivers/input/misc/appleir.c
diff --git a/Documentation/input/appleir.txt b/Documentation/input/appleir.txt
new file mode 100644
index 0000000..0aaf5fe
--- /dev/null
+++ b/Documentation/input/appleir.txt
@@ -0,0 +1,46 @@
+Apple IR receiver Driver (appleir)
+----------------------------------
+ Copyright (C) 2009 Bastien Nocera <hadess@hadess.net>
+
+The appleir driver is a kernel input driver to handle Apple's IR
+receivers (and associated remotes) in the kernel.
+
+The driver is an input driver which only handles "official" remotes
+as built and sold by Apple.
+
+Authors
+-------
+
+James McKenzie (original driver)
+Alex Karpenko (05ac:8242 support)
+Greg Kroah-Hartman (cleanups and original submission)
+Bastien Nocera (further cleanups and suspend support)
+
+Supported hardware
+------------------
+
+- All Apple laptops and desktops from 2005 onwards, except:
+ - the unibody Macbook (2009)
+ - Mac Pro (all versions)
+- Apple TV (all revisions)
+
+The remote will only support the 6 buttons of the original remotes
+as sold by Apple. See the next section if you want to use other remotes
+or want to use lirc with the device instead of the kernel driver.
+
+Using lirc (native) instead of the kernel driver
+------------------------------------------------
+
+First, you will need to disable the kernel driver for the receiver.
+
+This can be achieved by passing quirks to the usbhid driver.
+The quirk line would be:
+usbhid.quirks=0x05ac:0x8242:0x08
+
+With 0x05ac being the vendor ID (Apple, you shouldn't need to change this)
+With 0x8242 being the product ID (check the output of lsusb for your hardware)
+And 0x08 being "HID_CONNECT_HIDDEV"
+
+This should force the creation of a hiddev device for the receiver, and
+make it usable under lirc.
+
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 4b96e7a..d1fdcd0 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -353,10 +353,6 @@ static void apple_remove(struct hid_device *hdev)
}
static const struct hid_device_id apple_devices[] = {
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL),
- .driver_data = APPLE_HIDDEV | APPLE_IGNORE_HIDINPUT },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4),
- .driver_data = APPLE_HIDDEV | APPLE_IGNORE_HIDINPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE),
.driver_data = APPLE_MIGHTYMOUSE | APPLE_INVERT_HWHEEL },
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 7d05c4b..3efb0fa 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1252,8 +1252,6 @@ EXPORT_SYMBOL_GPL(hid_disconnect);
static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) },
@@ -1539,6 +1537,9 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)},
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)},
{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index adbef5d..c399110 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -90,6 +90,7 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a
#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b
+#define USB_DEVICE_ID_APPLE_IRCONTROL 0x8240
#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241
#define USB_DEVICE_ID_APPLE_IRCONTROL4 0x8242
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index a9bb254..51b6684 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -148,6 +148,19 @@ config INPUT_KEYSPAN_REMOTE
To compile this driver as a module, choose M here: the module will
be called keyspan_remote.
+config INPUT_APPLEIR
+ tristate "Apple infrared receiver (built in)"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to use a Apple infrared remote control. All
+ the Apple computers from 2005 onwards include such a port, except
+ the unibody Macbook (2009), and Mac Pros. This receiver is also
+ used in the Apple TV set-top box.
+
+ To compile this driver as a module, choose M here: the module will
+ be called appleir.
+
config INPUT_POWERMATE
tristate "Griffin PowerMate and Contour Jog support"
depends on USB_ARCH_HAS_HCD
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index a8b8485..041e6f5 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -5,6 +5,7 @@
# Each configuration option enables a list of files.
obj-$(CONFIG_INPUT_APANEL) += apanel.o
+obj-$(CONFIG_INPUT_APPLEIR) += appleir.o
obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o
obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
diff --git a/drivers/input/misc/appleir.c b/drivers/input/misc/appleir.c
new file mode 100644
index 0000000..6e332ab
--- /dev/null
+++ b/drivers/input/misc/appleir.c
@@ -0,0 +1,477 @@
+/*
+ * appleir: USB driver for the apple ir device
+ *
+ * Original driver written by James McKenzie
+ * Ported to recent 2.6 kernel versions by Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * Copyright (C) 2006 James McKenzie
+ * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2008 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+#define DRIVER_VERSION "v1.2"
+#define DRIVER_AUTHOR "James McKenzie"
+#define DRIVER_DESC "Apple infrared receiver driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_APPLE 0x05ac
+#define USB_DEVICE_ID_APPLE_IRCONTROL 0x8240
+#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241
+#define USB_DEVICE_ID_APPLE_IRCONTROL4 0x8242
+
+#define URB_SIZE 32
+
+#define MAX_KEYS 8
+#define MAX_KEYS_MASK (MAX_KEYS - 1)
+
+#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+
+struct appleir {
+ struct input_dev *input_dev;
+ u8 *data;
+ dma_addr_t dma_buf;
+ struct usb_device *usbdev;
+ unsigned int flags;
+ struct urb *urb;
+ int timer_initted;
+ struct timer_list key_up_timer;
+ int current_key;
+ char phys[32];
+};
+
+static DEFINE_MUTEX(appleir_mutex);
+
+enum {
+ APPLEIR_OPENED = 0x1,
+ APPLEIR_SUSPENDED = 0x2,
+};
+
+static struct usb_device_id appleir_ids[] = {
+ { USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL) },
+ { USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
+ { USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
+ {}
+};
+MODULE_DEVICE_TABLE(usb, appleir_ids);
+
+/* I have two devices both of which report the following */
+/* 25 87 ee 83 0a + */
+/* 25 87 ee 83 0c - */
+/* 25 87 ee 83 09 << */
+/* 25 87 ee 83 06 >> */
+/* 25 87 ee 83 05 >" */
+/* 25 87 ee 83 03 menu */
+/* 26 00 00 00 00 for key repeat*/
+
+/* Thomas Glanzmann reports the following responses */
+/* 25 87 ee ca 0b + */
+/* 25 87 ee ca 0d - */
+/* 25 87 ee ca 08 << */
+/* 25 87 ee ca 07 >> */
+/* 25 87 ee ca 04 >" */
+/* 25 87 ee ca 02 menu */
+/* 26 00 00 00 00 for key repeat*/
+/* He also observes the following event sometimes */
+/* sent after a key is release, which I interpret */
+/* as a flat battery message */
+/* 25 87 e0 ca 06 flat battery */
+
+/* Alexandre Karpenko reports the following responses for Device ID 0x8242 */
+/* 25 87 ee 47 0b + */
+/* 25 87 ee 47 0d - */
+/* 25 87 ee 47 08 << */
+/* 25 87 ee 47 07 >> */
+/* 25 87 ee 47 04 >" */
+/* 25 87 ee 47 02 menu */
+/* 26 87 ee 47 ** for key repeat (** is the code of the key being held) */
+
+static int keymap[MAX_KEYS] = {
+ KEY_RESERVED,
+ KEY_MENU,
+ KEY_PLAYPAUSE,
+ KEY_FORWARD,
+ KEY_BACK,
+ KEY_VOLUMEUP,
+ KEY_VOLUMEDOWN,
+ KEY_RESERVED,
+};
+
+static void dump_packet(struct appleir *appleir, char *msg, u8 *data, int len)
+{
+ int i;
+
+ printk(KERN_ERR "appleir: %s (%d bytes)", msg, len);
+
+ for (i = 0; i < len; ++i)
+ printk(" %02x", data[i]);
+ printk("\n");
+}
+
+static void key_up(struct appleir *appleir, int key)
+{
+ dbginfo (&appleir->input_dev->dev, "key %d up\n", key);
+ input_report_key(appleir->input_dev, key, 0);
+ input_sync(appleir->input_dev);
+}
+
+static void key_down(struct appleir *appleir, int key)
+{
+ dbginfo (&appleir->input_dev->dev, "key %d down\n", key);
+ input_report_key(appleir->input_dev, key, 1);
+ input_sync(appleir->input_dev);
+}
+
+static void battery_flat(struct appleir *appleir)
+{
+ dev_err(&appleir->input_dev->dev, "possible flat battery?\n");
+}
+
+static void key_up_tick(unsigned long data)
+{
+ struct appleir *appleir = (struct appleir *)data;
+
+ if (appleir->current_key) {
+ key_up(appleir, appleir->current_key);
+ appleir->current_key = 0;
+ }
+}
+
+static void new_data(struct appleir *appleir, u8 *data, int len)
+{
+ static const u8 keydown[] = { 0x25, 0x87, 0xee };
+ static const u8 keyrepeat[] = { 0x26, };
+ static const u8 flatbattery[] = { 0x25, 0x87, 0xe0 };
+
+ if (debug)
+ dump_packet(appleir, "received", data, len);
+
+ if (len != 5)
+ return;
+
+ if (!memcmp(data, keydown, sizeof(keydown))) {
+ /*If we already have a key down, take it up before marking */
+ /*this one down */
+ if (appleir->current_key)
+ key_up(appleir, appleir->current_key);
+ appleir->current_key = keymap[(data[4] >> 1) & MAX_KEYS_MASK];
+
+ key_down(appleir, appleir->current_key);
+ /*remote doesn't do key up, either pull them up, in the test */
+ /*above, or here set a timer which pulls them up after 1/8 s */
+ mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
+
+ return;
+ }
+
+ if (!memcmp(data, keyrepeat, sizeof(keyrepeat))) {
+ key_down(appleir, appleir->current_key);
+ /*remote doesn't do key up, either pull them up, in the test */
+ /*above, or here set a timer which pulls them up after 1/8 s */
+ mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
+ return;
+ }
+
+ if (!memcmp(data, flatbattery, sizeof(flatbattery))) {
+ battery_flat(appleir);
+ /* Fall through */
+ }
+
+ dump_packet(appleir, "unknown packet", data, len);
+}
+
+static void appleir_urb(struct urb *urb)
+{
+ struct appleir *appleir = urb->context;
+ int status = urb->status;
+ int retval;
+
+ switch (status) {
+ case 0:
+ new_data(appleir, urb->transfer_buffer, urb->actual_length);
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbginfo(&appleir->input_dev->dev, "%s - urb shutting down with status: %d", __func__,
+ urb->status);
+ return;
+ default:
+ dbginfo(&appleir->input_dev->dev, "%s - nonzero urb status received: %d", __func__,
+ urb->status);
+ }
+
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ err("%s - usb_submit_urb failed with result %d", __func__,
+ retval);
+}
+
+static int appleir_open(struct input_dev *dev)
+{
+ struct appleir *appleir = input_get_drvdata(dev);
+ struct usb_interface *intf = usb_ifnum_to_if(appleir->usbdev, 0);
+ int r;
+
+ r = usb_autopm_get_interface(intf);
+ if (r) {
+ dev_err(&intf->dev,
+ "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
+ return r;
+ }
+
+ mutex_lock(&appleir_mutex);
+
+ if (usb_submit_urb(appleir->urb, GFP_KERNEL)) {
+ r = -EIO;
+ goto fail;
+ }
+
+ appleir->flags |= APPLEIR_OPENED;
+
+ mutex_unlock(&appleir_mutex);
+
+ usb_autopm_put_interface(intf);
+
+ return 0;
+fail:
+ mutex_unlock(&appleir_mutex);
+ usb_autopm_put_interface(intf);
+ return r;
+}
+
+static void appleir_close(struct input_dev *dev)
+{
+ struct appleir *appleir = input_get_drvdata(dev);
+
+ mutex_lock(&appleir_mutex);
+
+ if (!(appleir->flags & APPLEIR_SUSPENDED)) {
+ usb_kill_urb(appleir->urb);
+ del_timer_sync(&appleir->key_up_timer);
+ }
+
+ appleir->flags &= ~APPLEIR_OPENED;
+
+ mutex_unlock(&appleir_mutex);
+}
+
+static int appleir_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *endpoint;
+ struct appleir *appleir = NULL;
+ struct input_dev *input_dev;
+ int retval = -ENOMEM;
+ int i;
+
+ appleir = kzalloc(sizeof(struct appleir), GFP_KERNEL);
+ if (!appleir)
+ goto fail;
+
+ appleir->data = usb_buffer_alloc(dev, URB_SIZE, GFP_KERNEL,
+ &appleir->dma_buf);
+ if (!appleir->data)
+ goto fail;
+
+ appleir->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!appleir->urb)
+ goto fail;
+
+ appleir->usbdev = dev;
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ goto fail;
+
+ appleir->input_dev = input_dev;
+
+ usb_make_path(dev, appleir->phys, sizeof(appleir->phys));
+ strlcpy(appleir->phys, "/input0", sizeof(appleir->phys));
+
+ input_dev->name = "Apple infrared remote control driver";
+ input_dev->phys = appleir->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->dev.parent = &intf->dev;
+ input_set_drvdata(input_dev, appleir);
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ input_dev->ledbit[0] = 0;
+
+ for (i = 0; i < MAX_KEYS; i++)
+ set_bit(keymap[i], input_dev->keybit);
+
+ clear_bit(0, input_dev->keybit);
+
+ input_dev->open = appleir_open;
+ input_dev->close = appleir_close;
+
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+ usb_fill_int_urb(appleir->urb, dev,
+ usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+ appleir->data, 8,
+ appleir_urb, appleir, endpoint->bInterval);
+
+ appleir->urb->transfer_dma = appleir->dma_buf;
+ appleir->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ usb_set_intfdata(intf, appleir);
+
+ init_timer(&appleir->key_up_timer);
+
+ appleir->key_up_timer.function = key_up_tick;
+ appleir->key_up_timer.data = (unsigned long)appleir;
+
+ appleir->timer_initted++;
+
+ retval = input_register_device(appleir->input_dev);
+ if (retval)
+ goto fail;
+
+ return 0;
+
+fail:
+ printk(KERN_WARNING "Failed to load appleir\n");
+ if (appleir) {
+ if (appleir->data)
+ usb_buffer_free(dev, URB_SIZE, appleir->data,
+ appleir->dma_buf);
+
+ if (appleir->timer_initted)
+ del_timer_sync(&appleir->key_up_timer);
+
+ if (appleir->input_dev)
+ input_free_device(appleir->input_dev);
+
+ kfree(appleir);
+ }
+
+ return retval;
+}
+
+static void appleir_disconnect(struct usb_interface *intf)
+{
+ struct appleir *appleir = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+ if (appleir) {
+ input_unregister_device(appleir->input_dev);
+ if (appleir->timer_initted)
+ del_timer_sync(&appleir->key_up_timer);
+ usb_kill_urb(appleir->urb);
+ usb_free_urb(appleir->urb);
+ usb_buffer_free(interface_to_usbdev(intf), URB_SIZE,
+ appleir->data, appleir->dma_buf);
+ kfree(appleir);
+ }
+}
+
+static int appleir_suspend(struct usb_interface *interface,
+ pm_message_t message)
+{
+ struct appleir *appleir;
+
+ appleir = usb_get_intfdata(interface);
+
+ mutex_lock(&appleir_mutex);
+
+ if (appleir->flags & APPLEIR_OPENED) {
+ usb_kill_urb(appleir->urb);
+ del_timer_sync(&appleir->key_up_timer);
+ }
+
+ appleir->flags |= APPLEIR_SUSPENDED;
+
+ mutex_unlock(&appleir_mutex);
+
+ return 0;
+}
+
+static int appleir_resume(struct usb_interface *interface)
+{
+ struct appleir *appleir;
+
+ appleir = usb_get_intfdata(interface);
+
+ mutex_lock(&appleir_mutex);
+
+ if (appleir->flags & APPLEIR_OPENED) {
+ struct usb_endpoint_descriptor *endpoint;
+
+ endpoint = &interface->cur_altsetting->endpoint[0].desc;
+ usb_fill_int_urb(appleir->urb, appleir->usbdev,
+ usb_rcvintpipe(appleir->usbdev, endpoint->bEndpointAddress),
+ appleir->data, 8,
+ appleir_urb, appleir, endpoint->bInterval);
+ appleir->urb->transfer_dma = appleir->dma_buf;
+ appleir->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ init_timer(&appleir->key_up_timer);
+
+ appleir->key_up_timer.function = key_up_tick;
+ appleir->key_up_timer.data = (unsigned long)appleir;
+ }
+
+ appleir->flags &= ~APPLEIR_SUSPENDED;
+
+ mutex_unlock(&appleir_mutex);
+
+ return 0;
+}
+
+static struct usb_driver appleir_driver = {
+ .name = "appleir",
+ .probe = appleir_probe,
+ .disconnect = appleir_disconnect,
+ .suspend = appleir_suspend,
+ .resume = appleir_resume,
+ .reset_resume = appleir_resume,
+ .id_table = appleir_ids,
+ .supports_autosuspend = 1,
+};
+
+static int __init appleir_init(void)
+{
+ int retval;
+
+ retval = usb_register(&appleir_driver);
+ if (retval)
+ goto out;
+ printk(KERN_INFO DRIVER_VERSION ":" DRIVER_DESC);
+out:
+ return retval;
+}
+
+static void __exit appleir_exit(void)
+{
+ usb_deregister(&appleir_driver);
+}
+
+module_init(appleir_init);
+module_exit(appleir_exit);
--
1.6.5.2