Blob Blame Raw
diff -up linux-2.6.32.noarch/drivers/usb/serial/Kconfig.orig linux-2.6.32.noarch/drivers/usb/serial/Kconfig
--- linux-2.6.32.noarch/drivers/usb/serial/Kconfig.orig	2009-12-02 22:51:21.000000000 -0500
+++ linux-2.6.32.noarch/drivers/usb/serial/Kconfig	2010-04-01 12:52:26.989997164 -0400
@@ -565,8 +565,12 @@ config USB_SERIAL_XIRCOM
 	  To compile this driver as a module, choose M here: the
 	  module will be called keyspan_pda.
 
+config USB_SERIAL_WWAN
+       tristate
+
 config USB_SERIAL_OPTION
 	tristate "USB driver for GSM and CDMA modems"
+	select USB_SERIAL_WWAN
 	help
 	  Say Y here if you have a GSM or CDMA modem that's connected to USB.
 
diff -up linux-2.6.32.noarch/drivers/usb/serial/Makefile.orig linux-2.6.32.noarch/drivers/usb/serial/Makefile
--- linux-2.6.32.noarch/drivers/usb/serial/Makefile.orig	2009-12-02 22:51:21.000000000 -0500
+++ linux-2.6.32.noarch/drivers/usb/serial/Makefile	2010-04-01 12:52:26.992996185 -0400
@@ -51,6 +51,7 @@ obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)		+=
 obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
 obj-$(CONFIG_USB_SERIAL_SPCP8X5)		+= spcp8x5.o
 obj-$(CONFIG_USB_SERIAL_SYMBOL)			+= symbolserial.o
+obj-$(CONFIG_USB_SERIAL_WWAN)			+= usb_wwan.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
diff -up linux-2.6.32.noarch/drivers/usb/serial/option.c.orig linux-2.6.32.noarch/drivers/usb/serial/option.c
--- linux-2.6.32.noarch/drivers/usb/serial/option.c.orig	2010-04-01 12:51:42.346995579 -0400
+++ linux-2.6.32.noarch/drivers/usb/serial/option.c	2010-04-01 12:53:47.537995720 -0400
@@ -41,35 +41,14 @@
 #include <linux/bitops.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include "usb-wwan.h"
 
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
-static int  option_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void option_close(struct usb_serial_port *port);
-static void option_dtr_rts(struct usb_serial_port *port, int on);
-
-static int  option_startup(struct usb_serial *serial);
-static void option_disconnect(struct usb_serial *serial);
-static void option_release(struct usb_serial *serial);
-static int  option_write_room(struct tty_struct *tty);
-
+static int option_send_setup(struct usb_serial_port *port);
 static void option_instat_callback(struct urb *urb);
 
-static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count);
-static int  option_chars_in_buffer(struct tty_struct *tty);
-static void option_set_termios(struct tty_struct *tty,
-			struct usb_serial_port *port, struct ktermios *old);
-static int  option_tiocmget(struct tty_struct *tty, struct file *file);
-static int  option_tiocmset(struct tty_struct *tty, struct file *file,
-				unsigned int set, unsigned int clear);
-static int  option_send_setup(struct usb_serial_port *port);
-#ifdef CONFIG_PM
-static int  option_suspend(struct usb_serial *serial, pm_message_t message);
-static int  option_resume(struct usb_serial *serial);
-#endif
-
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID			0x0AF0
 #define OPTION_PRODUCT_COLT			0x5000
@@ -677,22 +656,22 @@ static struct usb_serial_driver option_1
 	.id_table          = option_ids,
 	.num_ports         = 1,
 	.probe             = option_probe,
-	.open              = option_open,
-	.close             = option_close,
-	.dtr_rts	   = option_dtr_rts,
-	.write             = option_write,
-	.write_room        = option_write_room,
-	.chars_in_buffer   = option_chars_in_buffer,
-	.set_termios       = option_set_termios,
-	.tiocmget          = option_tiocmget,
-	.tiocmset          = option_tiocmset,
-	.attach            = option_startup,
-	.disconnect        = option_disconnect,
-	.release           = option_release,
+	.open              = usb_wwan_open,
+	.close             = usb_wwan_close,
+	.dtr_rts	   = usb_wwan_dtr_rts,
+	.write             = usb_wwan_write,
+	.write_room        = usb_wwan_write_room,
+	.chars_in_buffer   = usb_wwan_chars_in_buffer,
+	.set_termios       = usb_wwan_set_termios,
+	.tiocmget          = usb_wwan_tiocmget,
+	.tiocmset          = usb_wwan_tiocmset,
+	.attach            = usb_wwan_startup,
+	.disconnect        = usb_wwan_disconnect,
+	.release           = usb_wwan_release,
 	.read_int_callback = option_instat_callback,
 #ifdef CONFIG_PM
-	.suspend           = option_suspend,
-	.resume            = option_resume,
+	.suspend           = usb_wwan_suspend,
+	.resume            = usb_wwan_resume,
 #endif
 };
 
@@ -705,12 +684,6 @@ static int debug;
 #define IN_BUFLEN 4096
 #define OUT_BUFLEN 4096
 
-struct option_intf_private {
-	spinlock_t susp_lock;
-	unsigned int suspended:1;
-	int in_flight;
-};
-
 struct option_port_private {
 	/* Input endpoints and buffer for this port */
 	struct urb *in_urbs[N_IN_URB];
@@ -767,223 +740,35 @@ module_exit(option_exit);
 static int option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id)
 {
-	struct option_intf_private *data;
+	struct usb_wwan_intf_private *data;
 
 	/* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
 	if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
 		serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&
 		serial->interface->cur_altsetting->desc.bInterfaceClass == 0x8)
 		return -ENODEV;
 
 	/* Bandrich modem and AT command interface is 0xff */
 	if ((serial->dev->descriptor.idVendor == BANDRICH_VENDOR_ID ||
 		serial->dev->descriptor.idVendor == PIRELLI_VENDOR_ID) &&
 		serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
 		return -ENODEV;
 
	/* Don't bind network interfaces on Huawei K3765 & K4505 */
	if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID &&
		(serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 ||
			serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) &&
		serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
		return -ENODEV;

-	data = serial->private = kzalloc(sizeof(struct option_intf_private), GFP_KERNEL);
+	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
+	data->send_setup = option_send_setup;
 	spin_lock_init(&data->susp_lock);
 	return 0;
 }
 
-static void option_set_termios(struct tty_struct *tty,
-		struct usb_serial_port *port, struct ktermios *old_termios)
-{
-	dbg("%s", __func__);
-	/* Doesn't support option setting */
-	tty_termios_copy_hw(tty->termios, old_termios);
-	option_send_setup(port);
-}
-
-static int option_tiocmget(struct tty_struct *tty, struct file *file)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned int value;
-	struct option_port_private *portdata;
-
-	portdata = usb_get_serial_port_data(port);
-
-	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
-		((portdata->dtr_state) ? TIOCM_DTR : 0) |
-		((portdata->cts_state) ? TIOCM_CTS : 0) |
-		((portdata->dsr_state) ? TIOCM_DSR : 0) |
-		((portdata->dcd_state) ? TIOCM_CAR : 0) |
-		((portdata->ri_state) ? TIOCM_RNG : 0);
-
-	return value;
-}
-
-static int option_tiocmset(struct tty_struct *tty, struct file *file,
-			unsigned int set, unsigned int clear)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-
-	portdata = usb_get_serial_port_data(port);
-
-	/* FIXME: what locks portdata fields ? */
-	if (set & TIOCM_RTS)
-		portdata->rts_state = 1;
-	if (set & TIOCM_DTR)
-		portdata->dtr_state = 1;
-
-	if (clear & TIOCM_RTS)
-		portdata->rts_state = 0;
-	if (clear & TIOCM_DTR)
-		portdata->dtr_state = 0;
-	return option_send_setup(port);
-}
-
-/* Write */
-static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count)
-{
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	int i;
-	int left, todo;
-	struct urb *this_urb = NULL; /* spurious */
-	int err;
-	unsigned long flags;
-
-	portdata = usb_get_serial_port_data(port);
-	intfdata = port->serial->private;
-
-	dbg("%s: write (%d chars)", __func__, count);
-
-	i = 0;
-	left = count;
-	for (i = 0; left > 0 && i < N_OUT_URB; i++) {
-		todo = left;
-		if (todo > OUT_BUFLEN)
-			todo = OUT_BUFLEN;
-
-		this_urb = portdata->out_urbs[i];
-		if (test_and_set_bit(i, &portdata->out_busy)) {
-			if (time_before(jiffies,
-					portdata->tx_start_time[i] + 10 * HZ))
-				continue;
-			usb_unlink_urb(this_urb);
-			continue;
-		}
-		dbg("%s: endpoint %d buf %d", __func__,
-			usb_pipeendpoint(this_urb->pipe), i);
-
-		err = usb_autopm_get_interface_async(port->serial->interface);
-		if (err < 0)
-			break;
-
-		/* send the data */
-		memcpy(this_urb->transfer_buffer, buf, todo);
-		this_urb->transfer_buffer_length = todo;
-
-		spin_lock_irqsave(&intfdata->susp_lock, flags);
-		if (intfdata->suspended) {
-			usb_anchor_urb(this_urb, &portdata->delayed);
-			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-		} else {
-			intfdata->in_flight++;
-			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-			err = usb_submit_urb(this_urb, GFP_ATOMIC);
-			if (err) {
-				dbg("usb_submit_urb %p (write bulk) failed "
-					"(%d)", this_urb, err);
-				clear_bit(i, &portdata->out_busy);
-				spin_lock_irqsave(&intfdata->susp_lock, flags);
-				intfdata->in_flight--;
-				spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-				continue;
-			}
-		}
-
-		portdata->tx_start_time[i] = jiffies;
-		buf += todo;
-		left -= todo;
-	}
-
-	count -= left;
-	dbg("%s: wrote (did %d)", __func__, count);
-	return count;
-}
-
-static void option_indat_callback(struct urb *urb)
-{
-	int err;
-	int endpoint;
-	struct usb_serial_port *port;
-	struct tty_struct *tty;
-	unsigned char *data = urb->transfer_buffer;
-	int status = urb->status;
-
-	dbg("%s: %p", __func__, urb);
-
-	endpoint = usb_pipeendpoint(urb->pipe);
-	port =  urb->context;
-
-	if (status) {
-		dbg("%s: nonzero status: %d on endpoint %02x.",
-		    __func__, status, endpoint);
-	} else {
-		tty = tty_port_tty_get(&port->port);
-		if (urb->actual_length) {
-			tty_buffer_request_room(tty, urb->actual_length);
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-		} else 
-			dbg("%s: empty read urb received", __func__);
-		tty_kref_put(tty);
-
-		/* Resubmit urb so we continue receiving */
-		if (port->port.count && status != -ESHUTDOWN) {
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err)
-				printk(KERN_ERR "%s: resubmit read urb failed. "
-					"(%d)", __func__, err);
-			else
-				usb_mark_last_busy(port->serial->dev);
-		}
-
-	}
-	return;
-}
-
-static void option_outdat_callback(struct urb *urb)
-{
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	int i;
-
-	dbg("%s", __func__);
-
-	port =  urb->context;
-	intfdata = port->serial->private;
-
-	usb_serial_port_softint(port);
-	usb_autopm_put_interface_async(port->serial->interface);
-	portdata = usb_get_serial_port_data(port);
-	spin_lock(&intfdata->susp_lock);
-	intfdata->in_flight--;
-	spin_unlock(&intfdata->susp_lock);
-
-	for (i = 0; i < N_OUT_URB; ++i) {
-		if (portdata->out_urbs[i] == urb) {
-			smp_mb__before_clear_bit();
-			clear_bit(i, &portdata->out_busy);
-			break;
-		}
-	}
-}
-
 static void option_instat_callback(struct urb *urb)
 {
 	int err;
@@ -1026,183 +811,6 @@ static void option_instat_callback(struc
 	}
 }
 
-static int option_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-	int i;
-	int data_len = 0;
-	struct urb *this_urb;
-
-	portdata = usb_get_serial_port_data(port);
-
-	for (i = 0; i < N_OUT_URB; i++) {
-		this_urb = portdata->out_urbs[i];
-		if (this_urb && !test_bit(i, &portdata->out_busy))
-			data_len += OUT_BUFLEN;
-	}
-
-	dbg("%s: %d", __func__, data_len);
-	return data_len;
-}
-
-static int option_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-	int i;
-	int data_len = 0;
-	struct urb *this_urb;
-
-	portdata = usb_get_serial_port_data(port);
-
-	for (i = 0; i < N_OUT_URB; i++) {
-		this_urb = portdata->out_urbs[i];
-		/* FIXME: This locking is insufficient as this_urb may
-		   go unused during the test */
-		if (this_urb && test_bit(i, &portdata->out_busy))
-			data_len += this_urb->transfer_buffer_length;
-	}
-	dbg("%s: %d", __func__, data_len);
-	return data_len;
-}
-
-static int option_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	struct usb_serial *serial = port->serial;
-	int i, err;
-	struct urb *urb;
-
-	portdata = usb_get_serial_port_data(port);
-	intfdata = serial->private;
-
-	dbg("%s", __func__);
-
-	/* Start reading from the IN endpoint */
-	for (i = 0; i < N_IN_URB; i++) {
-		urb = portdata->in_urbs[i];
-		if (!urb)
-			continue;
-		err = usb_submit_urb(urb, GFP_KERNEL);
-		if (err) {
-			dbg("%s: submit urb %d failed (%d) %d",
-				__func__, i, err,
-				urb->transfer_buffer_length);
-		}
-	}
-
-	option_send_setup(port);
-
-	serial->interface->needs_remote_wakeup = 1;
-	spin_lock_irq(&intfdata->susp_lock);
-	portdata->opened = 1;
-	spin_unlock_irq(&intfdata->susp_lock);
-	usb_autopm_put_interface(serial->interface);
-
-	return 0;
-}
-
-static void option_dtr_rts(struct usb_serial_port *port, int on)
-{
-	struct usb_serial *serial = port->serial;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-	portdata = usb_get_serial_port_data(port);
-	mutex_lock(&serial->disc_mutex);
-	portdata->rts_state = on;
-	portdata->dtr_state = on;
-	if (serial->dev)
-		option_send_setup(port);
-	mutex_unlock(&serial->disc_mutex);
-}
-
-
-static void option_close(struct usb_serial_port *port)
-{
-	int i;
-	struct usb_serial *serial = port->serial;
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata = port->serial->private;
-
-	dbg("%s", __func__);
-	portdata = usb_get_serial_port_data(port);
-
-	if (serial->dev) {
-		/* Stop reading/writing urbs */
-		spin_lock_irq(&intfdata->susp_lock);
-		portdata->opened = 0;
-		spin_unlock_irq(&intfdata->susp_lock);
-
-		for (i = 0; i < N_IN_URB; i++)
-			usb_kill_urb(portdata->in_urbs[i]);
-		for (i = 0; i < N_OUT_URB; i++)
-			usb_kill_urb(portdata->out_urbs[i]);
-		usb_autopm_get_interface(serial->interface);
-		serial->interface->needs_remote_wakeup = 0;
-	}
-}
-
-/* Helper functions used by option_setup_urbs */
-static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
-		int dir, void *ctx, char *buf, int len,
-		void (*callback)(struct urb *))
-{
-	struct urb *urb;
-
-	if (endpoint == -1)
-		return NULL;		/* endpoint not needed */
-
-	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */
-	if (urb == NULL) {
-		dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
-		return NULL;
-	}
-
-		/* Fill URB using supplied data. */
-	usb_fill_bulk_urb(urb, serial->dev,
-		      usb_sndbulkpipe(serial->dev, endpoint) | dir,
-		      buf, len, callback, ctx);
-
-	return urb;
-}
-
-/* Setup urbs */
-static void option_setup_urbs(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		/* Do indat endpoints first */
-		for (j = 0; j < N_IN_URB; ++j) {
-			portdata->in_urbs[j] = option_setup_urb(serial,
-					port->bulk_in_endpointAddress,
-					USB_DIR_IN, port,
-					portdata->in_buffer[j],
-					IN_BUFLEN, option_indat_callback);
-		}
-
-		/* outdat endpoints */
-		for (j = 0; j < N_OUT_URB; ++j) {
-			portdata->out_urbs[j] = option_setup_urb(serial,
-					port->bulk_out_endpointAddress,
-					USB_DIR_OUT, port,
-					portdata->out_buffer[j],
-					OUT_BUFLEN, option_outdat_callback);
-		}
-	}
-}
-
-
 /** send RTS/DTR state to the port.
  *
  * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
@@ -1228,224 +836,6 @@ static int option_send_setup(struct usb_
 		0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
-static int option_startup(struct usb_serial *serial)
-{
-	int i, j, err;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-	u8 *buffer;
-
-	dbg("%s", __func__);
-
-	/* Now setup per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
-		if (!portdata) {
-			dbg("%s: kmalloc for option_port_private (%d) failed!.",
-					__func__, i);
-			return 1;
-		}
-		init_usb_anchor(&portdata->delayed);
-
-		for (j = 0; j < N_IN_URB; j++) {
-			buffer = (u8 *)__get_free_page(GFP_KERNEL);
-			if (!buffer)
-				goto bail_out_error;
-			portdata->in_buffer[j] = buffer;
-		}
-
-		for (j = 0; j < N_OUT_URB; j++) {
-			buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
-			if (!buffer)
-				goto bail_out_error2;
-			portdata->out_buffer[j] = buffer;
-		}
-
-		usb_set_serial_port_data(port, portdata);
-
-		if (!port->interrupt_in_urb)
-			continue;
-		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
-		if (err)
-			dbg("%s: submit irq_in urb failed %d",
-				__func__, err);
-	}
-	option_setup_urbs(serial);
-	return 0;
-
-bail_out_error2:
-	for (j = 0; j < N_OUT_URB; j++)
-		kfree(portdata->out_buffer[j]);
-bail_out_error:
-	for (j = 0; j < N_IN_URB; j++)
-		if (portdata->in_buffer[j])
-			free_page((unsigned long)portdata->in_buffer[j]);
-	kfree(portdata);
-	return 1;
-}
-
-static void stop_read_write_urbs(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	/* Stop reading/writing urbs */
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-		for (j = 0; j < N_IN_URB; j++)
-			usb_kill_urb(portdata->in_urbs[j]);
-		for (j = 0; j < N_OUT_URB; j++)
-			usb_kill_urb(portdata->out_urbs[j]);
-	}
-}
-
-static void option_disconnect(struct usb_serial *serial)
-{
-	dbg("%s", __func__);
-
-	stop_read_write_urbs(serial);
-}
-
-static void option_release(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-
-	/* Now free them */
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		for (j = 0; j < N_IN_URB; j++) {
-			if (portdata->in_urbs[j]) {
-				usb_free_urb(portdata->in_urbs[j]);
-				free_page((unsigned long)
-					portdata->in_buffer[j]);
-				portdata->in_urbs[j] = NULL;
-			}
-		}
-		for (j = 0; j < N_OUT_URB; j++) {
-			if (portdata->out_urbs[j]) {
-				usb_free_urb(portdata->out_urbs[j]);
-				kfree(portdata->out_buffer[j]);
-				portdata->out_urbs[j] = NULL;
-			}
-		}
-	}
-
-	/* Now free per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		kfree(usb_get_serial_port_data(port));
-	}
-}
-
-#ifdef CONFIG_PM
-static int option_suspend(struct usb_serial *serial, pm_message_t message)
-{
-	struct option_intf_private *intfdata = serial->private;
-	int b;
-
-	dbg("%s entered", __func__);
-
-	if (serial->dev->auto_pm) {
-		spin_lock_irq(&intfdata->susp_lock);
-		b = intfdata->in_flight;
-		spin_unlock_irq(&intfdata->susp_lock);
-
-		if (b)
-			return -EBUSY;
-	}
-
-	spin_lock_irq(&intfdata->susp_lock);
-	intfdata->suspended = 1;
-	spin_unlock_irq(&intfdata->susp_lock);
-	stop_read_write_urbs(serial);
-
-	return 0;
-}
-
-static void play_delayed(struct usb_serial_port *port)
-{
-	struct option_intf_private *data;
-	struct option_port_private *portdata;
-	struct urb *urb;
-	int err;
-
-	portdata = usb_get_serial_port_data(port);
-	data = port->serial->private;
-	while ((urb = usb_get_from_anchor(&portdata->delayed))) {
-		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (!err)
-			data->in_flight++;
-	}
-}
-
-static int option_resume(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_intf_private *intfdata = serial->private;
-	struct option_port_private *portdata;
-	struct urb *urb;
-	int err = 0;
-
-	dbg("%s entered", __func__);
-	/* get the interrupt URBs resubmitted unconditionally */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		if (!port->interrupt_in_urb) {
-			dbg("%s: No interrupt URB for port %d\n", __func__, i);
-			continue;
-		}
-		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
-		dbg("Submitted interrupt URB for port %d (result %d)", i, err);
-		if (err < 0) {
-			err("%s: Error %d for interrupt URB of port%d",
-				 __func__, err, i);
-			goto err_out;
-		}
-	}
-
-	for (i = 0; i < serial->num_ports; i++) {
-		/* walk all ports */
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		/* skip closed ports */
-		spin_lock_irq(&intfdata->susp_lock);
-		if (!portdata->opened) {
-			spin_unlock_irq(&intfdata->susp_lock);
-			continue;
-		}
-
-		for (j = 0; j < N_IN_URB; j++) {
-			urb = portdata->in_urbs[j];
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err < 0) {
-				err("%s: Error %d for bulk URB %d",
-					 __func__, err, i);
-				spin_unlock_irq(&intfdata->susp_lock);
-				goto err_out;
-			}
-		}
-		play_delayed(port);
-		spin_unlock_irq(&intfdata->susp_lock);
-	}
-	spin_lock_irq(&intfdata->susp_lock);
-	intfdata->suspended = 0;
-	spin_unlock_irq(&intfdata->susp_lock);
-err_out:
-	return err;
-}
-#endif
-
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff -up linux-2.6.32.noarch/drivers/usb/serial/qcserial.c.orig linux-2.6.32.noarch/drivers/usb/serial/qcserial.c
--- linux-2.6.32.noarch/drivers/usb/serial/qcserial.c.orig	2009-12-02 22:51:21.000000000 -0500
+++ linux-2.6.32.noarch/drivers/usb/serial/qcserial.c	2010-04-01 12:52:26.997995807 -0400
@@ -15,13 +15,14 @@
 #include <linux/tty_flip.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include "usb-wwan.h"
 
 #define DRIVER_AUTHOR "Qualcomm Inc"
 #define DRIVER_DESC "Qualcomm USB Serial driver"
 
 static int debug;
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
 	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
@@ -47,6 +48,37 @@ static struct usb_device_id id_table[] =
 	{USB_DEVICE(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
 	{USB_DEVICE(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
 	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+	{USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */
+	{USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
+	{USB_DEVICE(0x05c6, 0x9224)},	/* Sony Gobi 2000 QDL device (N0279, VU730) */
+	{USB_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */
+	{USB_DEVICE(0x05c6, 0x9244)},	/* Samsung Gobi 2000 QDL device (VL176) */
+	{USB_DEVICE(0x05c6, 0x9245)},	/* Samsung Gobi 2000 Modem device (VL176) */
+	{USB_DEVICE(0x03f0, 0x241d)},	/* HP Gobi 2000 QDL device (VP412) */
+	{USB_DEVICE(0x03f0, 0x251d)},	/* HP Gobi 2000 Modem device (VP412) */
+	{USB_DEVICE(0x05c6, 0x9214)},	/* Acer Gobi 2000 QDL device (VP413) */
+	{USB_DEVICE(0x05c6, 0x9215)},	/* Acer Gobi 2000 Modem device (VP413) */
+	{USB_DEVICE(0x05c6, 0x9264)},	/* Asus Gobi 2000 QDL device (VR305) */
+	{USB_DEVICE(0x05c6, 0x9265)},	/* Asus Gobi 2000 Modem device (VR305) */
+	{USB_DEVICE(0x05c6, 0x9234)},	/* Top Global Gobi 2000 QDL device (VR306) */
+	{USB_DEVICE(0x05c6, 0x9235)},	/* Top Global Gobi 2000 Modem device (VR306) */
+	{USB_DEVICE(0x05c6, 0x9274)},	/* iRex Technologies Gobi 2000 QDL device (VR307) */
+	{USB_DEVICE(0x05c6, 0x9275)},	/* iRex Technologies Gobi 2000 Modem device (VR307) */
+	{USB_DEVICE(0x1199, 0x9000)},	/* Sierra Wireless Gobi 2000 QDL device (VT773) */
+	{USB_DEVICE(0x1199, 0x9001)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9002)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9003)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9004)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9005)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9006)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9007)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9008)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9009)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x900a)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x16d8, 0x8001)},	/* CMDTech Gobi 2000 QDL device (VU922) */
+	{USB_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
+	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
+	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -63,6 +95,8 @@ static struct usb_driver qcdriver = {
 
 static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 {
+	struct usb_wwan_intf_private *data;
+	struct usb_host_interface *intf = serial->interface->cur_altsetting;
 	int retval = -ENODEV;
 	__u8 nintf;
 	__u8 ifnum;
@@ -71,33 +105,45 @@ static int qcprobe(struct usb_serial *se
 
 	nintf = serial->dev->actconfig->desc.bNumInterfaces;
 	dbg("Num Interfaces = %d", nintf);
-	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	ifnum = intf->desc.bInterfaceNumber;
 	dbg("This Interface = %d", ifnum);
 
+	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private),
+					 GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->susp_lock);
+
 	switch (nintf) {
 	case 1:
 		/* QDL mode */
-		if (serial->interface->num_altsetting == 2) {
-			struct usb_host_interface *intf;
-
+		/* Gobi 2000 has a single altsetting, older ones have two */
+		if (serial->interface->num_altsetting == 2)
 			intf = &serial->interface->altsetting[1];
-			if (intf->desc.bNumEndpoints == 2) {
-				if (usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
-				    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
-					dbg("QDL port found");
-					retval = usb_set_interface(serial->dev, ifnum, 1);
-					if (retval < 0) {
-						dev_err(&serial->dev->dev,
-							"Could not set interface, error %d\n",
-							retval);
-						retval = -ENODEV;
-					}
-					return retval;
-				}
+		else if (serial->interface->num_altsetting > 2)
+			break;
+
+		if (intf->desc.bNumEndpoints == 2 &&
+		    usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
+		    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
+			dbg("QDL port found");
+
+			if (serial->interface->num_altsetting == 1)
+				return 0;
+
+			retval = usb_set_interface(serial->dev, ifnum, 1);
+			if (retval < 0) {
+				dev_err(&serial->dev->dev,
+					"Could not set interface, error %d\n",
+					retval);
+				retval = -ENODEV;
 			}
+			return retval;
 		}
 		break;
 
+	case 3:
 	case 4:
 		/* Composite mode */
 		if (ifnum == 2) {
@@ -132,6 +178,18 @@ static struct usb_serial_driver qcdevice
 	.usb_driver          = &qcdriver,
 	.num_ports           = 1,
 	.probe               = qcprobe,
+	.open		     = usb_wwan_open,
+	.close		     = usb_wwan_close,
+	.write		     = usb_wwan_write,
+	.write_room	     = usb_wwan_write_room,
+	.chars_in_buffer     = usb_wwan_chars_in_buffer,
+	.attach		     = usb_wwan_startup,
+	.disconnect	     = usb_wwan_disconnect,
+	.release	     = usb_wwan_release,
+#ifdef CONFIG_PM
+	.suspend	     = usb_wwan_suspend,
+	.resume		     = usb_wwan_resume,
+#endif
 };
 
 static int __init qcinit(void)
diff -up linux-2.6.32.noarch/drivers/usb/serial/usb_wwan.c.orig linux-2.6.32.noarch/drivers/usb/serial/usb_wwan.c
--- linux-2.6.32.noarch/drivers/usb/serial/usb_wwan.c.orig	2010-04-01 12:52:26.999995712 -0400
+++ linux-2.6.32.noarch/drivers/usb/serial/usb_wwan.c	2010-04-01 12:52:26.998995550 -0400
@@ -0,0 +1,665 @@
+/*
+  USB Driver layer for GSM modems
+
+  Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
+
+  This driver is free software; you can redistribute it and/or modify
+  it under the terms of Version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+
+  History: see the git log.
+
+  Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
+
+  This driver exists because the "normal" serial driver doesn't work too well
+  with GSM modems. Issues:
+  - data loss -- one single Receive URB is not nearly enough
+  - controlling the baud rate doesn't make sense
+*/
+
+#define DRIVER_VERSION "v0.7.2"
+#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
+#define DRIVER_DESC "USB Driver for GSM modems"
+
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include "usb-wwan.h"
+
+static int debug;
+
+void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_serial *serial = port->serial;
+	struct usb_wwan_port_private *portdata;
+
+	struct usb_wwan_intf_private *intfdata;
+
+	dbg("%s", __func__);
+
+	intfdata = port->serial->private;
+
+	if (!intfdata->send_setup)
+		return;
+
+	portdata = usb_get_serial_port_data(port);
+	mutex_lock(&serial->disc_mutex);
+	portdata->rts_state = on;
+	portdata->dtr_state = on;
+	if (serial->dev)
+		intfdata->send_setup(port);
+	mutex_unlock(&serial->disc_mutex);
+}
+EXPORT_SYMBOL(usb_wwan_dtr_rts);
+
+void usb_wwan_set_termios(struct tty_struct *tty,
+			  struct usb_serial_port *port,
+			  struct ktermios *old_termios)
+{
+	struct usb_wwan_intf_private *intfdata = port->serial->private;
+
+	dbg("%s", __func__);
+
+	/* Doesn't support option setting */
+	tty_termios_copy_hw(tty->termios, old_termios);
+
+	if (intfdata->send_setup)
+		intfdata->send_setup(port);
+}
+EXPORT_SYMBOL(usb_wwan_set_termios);
+
+int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int value;
+	struct usb_wwan_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+
+	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
+	    ((portdata->dtr_state) ? TIOCM_DTR : 0) |
+	    ((portdata->cts_state) ? TIOCM_CTS : 0) |
+	    ((portdata->dsr_state) ? TIOCM_DSR : 0) |
+	    ((portdata->dcd_state) ? TIOCM_CAR : 0) |
+	    ((portdata->ri_state) ? TIOCM_RNG : 0);
+
+	return value;
+}
+EXPORT_SYMBOL(usb_wwan_tiocmget);
+
+int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+		      unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = port->serial->private;
+
+	if (!intfdata->send_setup)
+		return -EINVAL;
+
+	/* FIXME: what locks portdata fields ? */
+	if (set & TIOCM_RTS)
+		portdata->rts_state = 1;
+	if (set & TIOCM_DTR)
+		portdata->dtr_state = 1;
+
+	if (clear & TIOCM_RTS)
+		portdata->rts_state = 0;
+	if (clear & TIOCM_DTR)
+		portdata->dtr_state = 0;
+	return intfdata->send_setup(port);
+}
+EXPORT_SYMBOL(usb_wwan_tiocmset);
+
+/* Write */
+int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
+		   const unsigned char *buf, int count)
+{
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	int i;
+	int left, todo;
+	struct urb *this_urb = NULL;	/* spurious */
+	int err;
+	unsigned long flags;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = port->serial->private;
+
+	dbg("%s: write (%d chars)", __func__, count);
+
+	i = 0;
+	left = count;
+	for (i = 0; left > 0 && i < N_OUT_URB; i++) {
+		todo = left;
+		if (todo > OUT_BUFLEN)
+			todo = OUT_BUFLEN;
+
+		this_urb = portdata->out_urbs[i];
+		if (test_and_set_bit(i, &portdata->out_busy)) {
+			if (time_before(jiffies,
+					portdata->tx_start_time[i] + 10 * HZ))
+				continue;
+			usb_unlink_urb(this_urb);
+			continue;
+		}
+		dbg("%s: endpoint %d buf %d", __func__,
+		    usb_pipeendpoint(this_urb->pipe), i);
+
+		err = usb_autopm_get_interface_async(port->serial->interface);
+		if (err < 0)
+			break;
+
+		/* send the data */
+		memcpy(this_urb->transfer_buffer, buf, todo);
+		this_urb->transfer_buffer_length = todo;
+
+		spin_lock_irqsave(&intfdata->susp_lock, flags);
+		if (intfdata->suspended) {
+			usb_anchor_urb(this_urb, &portdata->delayed);
+			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+		} else {
+			intfdata->in_flight++;
+			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+			err = usb_submit_urb(this_urb, GFP_ATOMIC);
+			if (err) {
+				dbg("usb_submit_urb %p (write bulk) failed "
+				    "(%d)", this_urb, err);
+				clear_bit(i, &portdata->out_busy);
+				spin_lock_irqsave(&intfdata->susp_lock, flags);
+				intfdata->in_flight--;
+				spin_unlock_irqrestore(&intfdata->susp_lock,
+						       flags);
+				continue;
+			}
+		}
+
+		portdata->tx_start_time[i] = jiffies;
+		buf += todo;
+		left -= todo;
+	}
+
+	count -= left;
+	dbg("%s: wrote (did %d)", __func__, count);
+	return count;
+}
+EXPORT_SYMBOL(usb_wwan_write);
+
+static void usb_wwan_indat_callback(struct urb *urb)
+{
+	int err;
+	int endpoint;
+	struct usb_serial_port *port;
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+
+	dbg("%s: %p", __func__, urb);
+
+	endpoint = usb_pipeendpoint(urb->pipe);
+	port = urb->context;
+
+	if (status) {
+		dbg("%s: nonzero status: %d on endpoint %02x.",
+		    __func__, status, endpoint);
+	} else {
+		tty = tty_port_tty_get(&port->port);
+		if (urb->actual_length) {
+			tty_buffer_request_room(tty, urb->actual_length);
+			tty_insert_flip_string(tty, data, urb->actual_length);
+			tty_flip_buffer_push(tty);
+		} else
+			dbg("%s: empty read urb received", __func__);
+		tty_kref_put(tty);
+
+		/* Resubmit urb so we continue receiving */
+		if (port->port.count && status != -ESHUTDOWN) {
+			err = usb_submit_urb(urb, GFP_ATOMIC);
+			if (err)
+				printk(KERN_ERR "%s: resubmit read urb failed. "
+				       "(%d)", __func__, err);
+			else
+				usb_mark_last_busy(port->serial->dev);
+		}
+
+	}
+	return;
+}
+
+static void usb_wwan_outdat_callback(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	int i;
+
+	dbg("%s", __func__);
+
+	port = urb->context;
+	intfdata = port->serial->private;
+
+	usb_serial_port_softint(port);
+	usb_autopm_put_interface_async(port->serial->interface);
+	portdata = usb_get_serial_port_data(port);
+	spin_lock(&intfdata->susp_lock);
+	intfdata->in_flight--;
+	spin_unlock(&intfdata->susp_lock);
+
+	for (i = 0; i < N_OUT_URB; ++i) {
+		if (portdata->out_urbs[i] == urb) {
+			smp_mb__before_clear_bit();
+			clear_bit(i, &portdata->out_busy);
+			break;
+		}
+	}
+}
+
+int usb_wwan_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	int i;
+	int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		this_urb = portdata->out_urbs[i];
+		if (this_urb && !test_bit(i, &portdata->out_busy))
+			data_len += OUT_BUFLEN;
+	}
+
+	dbg("%s: %d", __func__, data_len);
+	return data_len;
+}
+EXPORT_SYMBOL(usb_wwan_write_room);
+
+int usb_wwan_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	int i;
+	int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		this_urb = portdata->out_urbs[i];
+		/* FIXME: This locking is insufficient as this_urb may
+		   go unused during the test */
+		if (this_urb && test_bit(i, &portdata->out_busy))
+			data_len += this_urb->transfer_buffer_length;
+	}
+	dbg("%s: %d", __func__, data_len);
+	return data_len;
+}
+EXPORT_SYMBOL(usb_wwan_chars_in_buffer);
+
+int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	struct usb_serial *serial = port->serial;
+	int i, err;
+	struct urb *urb;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = serial->private;
+
+	dbg("%s", __func__);
+
+	/* Start reading from the IN endpoint */
+	for (i = 0; i < N_IN_URB; i++) {
+		urb = portdata->in_urbs[i];
+		if (!urb)
+			continue;
+		err = usb_submit_urb(urb, GFP_KERNEL);
+		if (err) {
+			dbg("%s: submit urb %d failed (%d) %d",
+			    __func__, i, err, urb->transfer_buffer_length);
+		}
+	}
+
+	if (intfdata->send_setup)
+		intfdata->send_setup(port);
+
+	serial->interface->needs_remote_wakeup = 1;
+	spin_lock_irq(&intfdata->susp_lock);
+	portdata->opened = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+	usb_autopm_put_interface(serial->interface);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_wwan_open);
+
+void usb_wwan_close(struct usb_serial_port *port)
+{
+	int i;
+	struct usb_serial *serial = port->serial;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata = port->serial->private;
+
+	dbg("%s", __func__);
+	portdata = usb_get_serial_port_data(port);
+
+	if (serial->dev) {
+		/* Stop reading/writing urbs */
+		spin_lock_irq(&intfdata->susp_lock);
+		portdata->opened = 0;
+		spin_unlock_irq(&intfdata->susp_lock);
+
+		for (i = 0; i < N_IN_URB; i++)
+			usb_kill_urb(portdata->in_urbs[i]);
+		for (i = 0; i < N_OUT_URB; i++)
+			usb_kill_urb(portdata->out_urbs[i]);
+		usb_autopm_get_interface(serial->interface);
+		serial->interface->needs_remote_wakeup = 0;
+	}
+}
+EXPORT_SYMBOL(usb_wwan_close);
+
+/* Helper functions used by usb_wwan_setup_urbs */
+static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint,
+				      int dir, void *ctx, char *buf, int len,
+				      void (*callback) (struct urb *))
+{
+	struct urb *urb;
+
+	if (endpoint == -1)
+		return NULL;	/* endpoint not needed */
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);	/* No ISO */
+	if (urb == NULL) {
+		dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
+		return NULL;
+	}
+
+	/* Fill URB using supplied data. */
+	usb_fill_bulk_urb(urb, serial->dev,
+			  usb_sndbulkpipe(serial->dev, endpoint) | dir,
+			  buf, len, callback, ctx);
+
+	return urb;
+}
+
+/* Setup urbs */
+static void usb_wwan_setup_urbs(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+
+	dbg("%s", __func__);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		/* Do indat endpoints first */
+		for (j = 0; j < N_IN_URB; ++j) {
+			portdata->in_urbs[j] = usb_wwan_setup_urb(serial,
+								  port->
+								  bulk_in_endpointAddress,
+								  USB_DIR_IN,
+								  port,
+								  portdata->
+								  in_buffer[j],
+								  IN_BUFLEN,
+								  usb_wwan_indat_callback);
+		}
+
+		/* outdat endpoints */
+		for (j = 0; j < N_OUT_URB; ++j) {
+			portdata->out_urbs[j] = usb_wwan_setup_urb(serial,
+								   port->
+								   bulk_out_endpointAddress,
+								   USB_DIR_OUT,
+								   port,
+								   portdata->
+								   out_buffer
+								   [j],
+								   OUT_BUFLEN,
+								   usb_wwan_outdat_callback);
+		}
+	}
+}
+
+int usb_wwan_startup(struct usb_serial *serial)
+{
+	int i, j, err;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+	u8 *buffer;
+
+	dbg("%s", __func__);
+
+	/* Now setup per port private data */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+		if (!portdata) {
+			dbg("%s: kmalloc for usb_wwan_port_private (%d) failed!.",
+			    __func__, i);
+			return 1;
+		}
+		init_usb_anchor(&portdata->delayed);
+
+		for (j = 0; j < N_IN_URB; j++) {
+			buffer = (u8 *) __get_free_page(GFP_KERNEL);
+			if (!buffer)
+				goto bail_out_error;
+			portdata->in_buffer[j] = buffer;
+		}
+
+		for (j = 0; j < N_OUT_URB; j++) {
+			buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
+			if (!buffer)
+				goto bail_out_error2;
+			portdata->out_buffer[j] = buffer;
+		}
+
+		usb_set_serial_port_data(port, portdata);
+
+		if (!port->interrupt_in_urb)
+			continue;
+		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		if (err)
+			dbg("%s: submit irq_in urb failed %d", __func__, err);
+	}
+	usb_wwan_setup_urbs(serial);
+	return 0;
+
+bail_out_error2:
+	for (j = 0; j < N_OUT_URB; j++)
+		kfree(portdata->out_buffer[j]);
+bail_out_error:
+	for (j = 0; j < N_IN_URB; j++)
+		if (portdata->in_buffer[j])
+			free_page((unsigned long)portdata->in_buffer[j]);
+	kfree(portdata);
+	return 1;
+}
+EXPORT_SYMBOL(usb_wwan_startup);
+
+static void stop_read_write_urbs(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+
+	/* Stop reading/writing urbs */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+		for (j = 0; j < N_IN_URB; j++)
+			usb_kill_urb(portdata->in_urbs[j]);
+		for (j = 0; j < N_OUT_URB; j++)
+			usb_kill_urb(portdata->out_urbs[j]);
+	}
+}
+
+void usb_wwan_disconnect(struct usb_serial *serial)
+{
+	dbg("%s", __func__);
+
+	stop_read_write_urbs(serial);
+}
+EXPORT_SYMBOL(usb_wwan_disconnect);
+
+void usb_wwan_release(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+
+	dbg("%s", __func__);
+
+	/* Now free them */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		for (j = 0; j < N_IN_URB; j++) {
+			usb_free_urb(portdata->in_urbs[j]);
+			free_page((unsigned long)
+				  portdata->in_buffer[j]);
+			portdata->in_urbs[j] = NULL;
+		}
+		for (j = 0; j < N_OUT_URB; j++) {
+			usb_free_urb(portdata->out_urbs[j]);
+			kfree(portdata->out_buffer[j]);
+			portdata->out_urbs[j] = NULL;
+		}
+	}
+
+	/* Now free per port private data */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		kfree(usb_get_serial_port_data(port));
+	}
+}
+EXPORT_SYMBOL(usb_wwan_release);
+
+#ifdef CONFIG_PM
+int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	struct usb_wwan_intf_private *intfdata = serial->private;
+	int b;
+
+	dbg("%s entered", __func__);
+
+	if (message.event & PM_EVENT_AUTO) {
+		spin_lock_irq(&intfdata->susp_lock);
+		b = intfdata->in_flight;
+		spin_unlock_irq(&intfdata->susp_lock);
+
+		if (b)
+			return -EBUSY;
+	}
+
+	spin_lock_irq(&intfdata->susp_lock);
+	intfdata->suspended = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+	stop_read_write_urbs(serial);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_wwan_suspend);
+
+static void play_delayed(struct usb_serial_port *port)
+{
+	struct usb_wwan_intf_private *data;
+	struct usb_wwan_port_private *portdata;
+	struct urb *urb;
+	int err;
+
+	portdata = usb_get_serial_port_data(port);
+	data = port->serial->private;
+	while ((urb = usb_get_from_anchor(&portdata->delayed))) {
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (!err)
+			data->in_flight++;
+	}
+}
+
+int usb_wwan_resume(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_intf_private *intfdata = serial->private;
+	struct usb_wwan_port_private *portdata;
+	struct urb *urb;
+	int err = 0;
+
+	dbg("%s entered", __func__);
+	/* get the interrupt URBs resubmitted unconditionally */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		if (!port->interrupt_in_urb) {
+			dbg("%s: No interrupt URB for port %d\n", __func__, i);
+			continue;
+		}
+		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+		dbg("Submitted interrupt URB for port %d (result %d)", i, err);
+		if (err < 0) {
+			err("%s: Error %d for interrupt URB of port%d",
+			    __func__, err, i);
+			goto err_out;
+		}
+	}
+
+	for (i = 0; i < serial->num_ports; i++) {
+		/* walk all ports */
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		/* skip closed ports */
+		spin_lock_irq(&intfdata->susp_lock);
+		if (!portdata->opened) {
+			spin_unlock_irq(&intfdata->susp_lock);
+			continue;
+		}
+
+		for (j = 0; j < N_IN_URB; j++) {
+			urb = portdata->in_urbs[j];
+			err = usb_submit_urb(urb, GFP_ATOMIC);
+			if (err < 0) {
+				err("%s: Error %d for bulk URB %d",
+				    __func__, err, i);
+				spin_unlock_irq(&intfdata->susp_lock);
+				goto err_out;
+			}
+		}
+		play_delayed(port);
+		spin_unlock_irq(&intfdata->susp_lock);
+	}
+	spin_lock_irq(&intfdata->susp_lock);
+	intfdata->suspended = 0;
+	spin_unlock_irq(&intfdata->susp_lock);
+err_out:
+	return err;
+}
+EXPORT_SYMBOL(usb_wwan_resume);
+#endif
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages");
diff -up linux-2.6.32.noarch/drivers/usb/serial/usb-wwan.h.orig linux-2.6.32.noarch/drivers/usb/serial/usb-wwan.h
--- linux-2.6.32.noarch/drivers/usb/serial/usb-wwan.h.orig	2010-04-01 12:52:26.999995712 -0400
+++ linux-2.6.32.noarch/drivers/usb/serial/usb-wwan.h	2010-04-01 12:52:26.999995712 -0400
@@ -0,0 +1,66 @@
+/*
+ * Definitions for USB serial mobile broadband cards
+ */
+
+#ifndef __LINUX_USB_USB_WWAN
+#define __LINUX_USB_USB_WWAN
+
+extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on);
+extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port);
+extern void usb_wwan_close(struct usb_serial_port *port);
+extern int usb_wwan_startup(struct usb_serial *serial);
+extern void usb_wwan_disconnect(struct usb_serial *serial);
+extern void usb_wwan_release(struct usb_serial *serial);
+extern int usb_wwan_write_room(struct tty_struct *tty);
+extern void usb_wwan_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 struct ktermios *old);
+extern int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file);
+extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+			     unsigned int set, unsigned int clear);
+extern int usb_wwan_send_setup(struct usb_serial_port *port);
+extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
+			  const unsigned char *buf, int count);
+extern int usb_wwan_chars_in_buffer(struct tty_struct *tty);
+#ifdef CONFIG_PM
+extern int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message);
+extern int usb_wwan_resume(struct usb_serial *serial);
+#endif
+
+/* per port private data */
+
+#define N_IN_URB 4
+#define N_OUT_URB 4
+#define IN_BUFLEN 4096
+#define OUT_BUFLEN 4096
+
+struct usb_wwan_intf_private {
+	spinlock_t susp_lock;
+	unsigned int suspended:1;
+	int in_flight;
+	int (*send_setup) (struct usb_serial_port *port);
+};
+
+struct usb_wwan_port_private {
+	/* Input endpoints and buffer for this port */
+	struct urb *in_urbs[N_IN_URB];
+	u8 *in_buffer[N_IN_URB];
+	/* Output endpoints and buffer for this port */
+	struct urb *out_urbs[N_OUT_URB];
+	u8 *out_buffer[N_OUT_URB];
+	unsigned long out_busy;	/* Bit vector of URBs in use */
+	int opened;
+	struct usb_anchor delayed;
+
+	/* Settings for the port */
+	int rts_state;		/* Handshaking pins (outputs) */
+	int dtr_state;
+	int cts_state;		/* Handshaking pins (inputs) */
+	int dsr_state;
+	int dcd_state;
+	int ri_state;
+
+	unsigned long tx_start_time[N_OUT_URB];
+};
+
+#endif /* __LINUX_USB_USB_WWAN */