This only showed up in one SDV (Montevina).
The PCIE slots don't seem to like network cards, so this is the only hope
to get networking working.  It's never going upstream, but it's low impact
enough to carry just to keep those SDVs working.

--- linux-2.6.35.noarch/drivers/net/e1000e/ich8lan.c~	2010-09-29 17:53:13.000000000 -0400
+++ linux-2.6.35.noarch/drivers/net/e1000e/ich8lan.c	2010-09-29 17:54:00.000000000 -0400
@@ -424,6 +424,12 @@ static s32 e1000_init_phy_params_ich8lan
 
 	/* Verify phy id */
 	switch (phy->id) {
+	case 0:
+		if (hw->adapter->pdev->device == 0x10be)
+			e_dbg("got 0 phy id, trying anyway");
+			/* Fall through to IGP03E1000 case below */
+		else
+			return -E1000_ERR_PHY;
 	case IGP03E1000_E_PHY_ID:
 		phy->type = e1000_phy_igp_3;
 		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
--- linux-2.6.35.noarch/drivers/net/e1000e/netdev.c~	2010-09-29 17:54:07.000000000 -0400
+++ linux-2.6.35.noarch/drivers/net/e1000e/netdev.c	2010-09-29 17:54:29.000000000 -0400
@@ -5994,6 +5994,7 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, 0x10be), board_ich9lan },
 
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },