From 6809645a740693c8c7fe1f86e396ae4c0cdac9ff Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Sun, 29 May 2016 11:34:51 +0100 Subject: [PATCH] arm: i.MX6 Utilite device dtb --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-cm-fx6.dts | 136 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6q-utilite-pro.dts | 128 ++++++++++++++++++++++++++++++ 3 files changed, 265 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-utilite-pro.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70..90a85a2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -348,6 +348,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1020-comtft.dtb \ imx6q-tx6q-1110.dtb \ imx6q-udoo.dtb \ + imx6q-utilite-pro.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 99b46f8..f4fc22e 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -31,6 +31,61 @@ linux,default-trigger = "heartbeat"; }; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + + reg_usb_h1_vbus: usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 8 0>; + enable-active-high; + }; + }; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + + partition@0 { + label = "uboot"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "uboot environment"; + reg = <0xc0000 0x40000>; + }; + + partition@100000 { + label = "reserved"; + reg = <0x100000 0x100000>; + }; + }; }; &fec { @@ -46,8 +101,31 @@ status = "okay"; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + clock-frequency = <100000>; + + eeprom@50 { + compatible = "at24,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &iomuxc { imx6q-cm-fx6 { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -91,17 +169,75 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x80000000 + >; + }; + pinctrl_uart4: uart4grp { fsl,pins = < MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 >; }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x80000000 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 + >; + }; }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 26 0>; + power-on-gpio = <&gpio2 24 0>; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; status = "okay"; }; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts new file mode 100644 index 0000000..3966595 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -0,0 +1,128 @@ +/* + * Copyright 2016 Christopher Spinrath + * Copyright 2013 CompuLab Ltd. + * + * Based on the GPLv2 licensed devicetree distributed with the vendor + * kernel for the Utilite Pro: + * Copyright 2013 CompuLab Ltd. + * Author: Valentin Raevsky + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx6q-cm-fx6.dts" + +/ { + model = "CompuLab Utilite Pro"; + compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q"; + + aliases { + ethernet1 = ð1; + rtc0 = &em3027; + rtc1 = &snvs_rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + power { + label = "Power Button"; + gpios = <&gpio1 29 1>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom@50 { + compatible = "at24,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + em3027: rtc@56 { + compatible = "emmicro,em3027"; + reg = <0x56>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + /* power button */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + >; + }; + }; + + imx6q-utilite-pro { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + >; + }; + }; +}; + +&pcie { + pcie@0,0 { + reg = <0x000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + + /* non-removable i211 ethernet card */ + eth1: intel,i211@pcie0,0 { + reg = <0x010000 0 0 0 0>; + }; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + dma-names = "rx", "tx"; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + status = "okay"; +}; -- 2.7.4