diff --git a/arm-dts-am335x-bone-common-add-uart2_pins-uart4_pins.patch b/arm-dts-am335x-bone-common-add-uart2_pins-uart4_pins.patch deleted file mode 100644 index 1db0a23..0000000 --- a/arm-dts-am335x-bone-common-add-uart2_pins-uart4_pins.patch +++ /dev/null @@ -1,42 +0,0 @@ -From: Robert Nelson -Date: Thu, 13 Mar 2014 14:18:52 -0500 -Subject: [PATCH] arm: dts: am335x-bone-common: add - uart2_pins/uart4_pins/uart5_pins - -Signed-off-by: Robert Nelson ---- - arch/arm/boot/dts/am335x-bone-common.dtsi | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - -diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi -index ab90dc7f00f3..528961b32e92 100644 ---- a/arch/arm/boot/dts/am335x-bone-common.dtsi -+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi -@@ -109,6 +109,27 @@ - >; - }; - -+ uart2_pins: pinmux_uart2_pins { -+ pinctrl-single,pins = < -+ 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */ -+ 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */ -+ >; -+ }; -+ -+ uart4_pins: pinmux_uart4_pins { -+ pinctrl-single,pins = < -+ 0x070 0x26 /* gpmc_wait0.uart4_rxd | MODE6 */ -+ 0x074 0x06 /* gpmc_wpn.uart4_txd | MODE6 */ -+ >; -+ }; -+ -+ uart5_pins: pinmux_uart5_pins { -+ pinctrl-single,pins = < -+ 0x0C4 0x24 /* lcd_data9.uart5_rxd | MODE4 */ -+ 0x0C0 0x04 /* lcd_data8.uart5_txd | MODE4 */ -+ >; -+ }; -+ - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ diff --git a/arm-dts-am335x-bone-common-setup-default-pinmux-http.patch b/arm-dts-am335x-bone-common-setup-default-pinmux-http.patch deleted file mode 100644 index 829bd16..0000000 --- a/arm-dts-am335x-bone-common-setup-default-pinmux-http.patch +++ /dev/null @@ -1,218 +0,0 @@ -From: Robert Nelson -Date: Tue, 31 Dec 2013 14:18:00 -0600 -Subject: [PATCH] arm: dts: am335x-bone-common: setup default pinmux - http://elinux.org/Basic_Proto_Cape - -Signed-off-by: Robert Nelson ---- - arch/arm/boot/dts/am335x-bone-common.dtsi | 171 ++++++++++++++++++++++++++++++ - 1 file changed, 171 insertions(+) - -diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi -index fec78349c1f3..ab90dc7f00f3 100644 ---- a/arch/arm/boot/dts/am335x-bone-common.dtsi -+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi -@@ -95,6 +95,20 @@ - >; - }; - -+ uart1_pins: pinmux_uart1_pins { -+ pinctrl-single,pins = < -+ 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ -+ 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ -+ >; -+ }; -+ -+ uart1_pins: pinmux_uart1_pins { -+ pinctrl-single,pins = < -+ 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ -+ 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ -+ >; -+ }; -+ - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ -@@ -175,6 +189,60 @@ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ - >; - }; -+ -+ spi0_pins: pinmux_spi0_pins { -+ pinctrl-single,pins = < -+ 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ -+ 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ -+ 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ -+ 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ -+ >; -+ }; -+ -+ ehrpwm1_pin_p9_14: pinmux_ehrpwm1_pin_p9_14 { -+ pinctrl-single,pins = < -+ 0x048 0x6 /* P9_14 (ZCZ ball U14) | MODE 6 */ -+ >; -+ }; -+ -+ ehrpwm1_pin_p9_16: pinmux_ehrpwm1_pin_p9_16 { -+ pinctrl-single,pins = < -+ 0x04c 0x6 /* P9_16 (ZCZ ball T14) | MODE 6 */ -+ >; -+ }; -+ -+ ecap0_pin_p9_42: pinmux_ecap0_pin_p9_42 { -+ pinctrl-single,pins = < -+ 0x164 0x0 /* P9_42 (ZCZ ball C18) | MODE 0 */ -+ >; -+ }; -+ -+ spi0_pins: pinmux_spi0_pins { -+ pinctrl-single,pins = < -+ 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ -+ 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ -+ 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ -+ 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ -+ >; -+ }; -+ -+ ehrpwm1_pin_p9_14: pinmux_ehrpwm1_pin_p9_14 { -+ pinctrl-single,pins = < -+ 0x048 0x6 /* P9_14 (ZCZ ball U14) | MODE 6 */ -+ >; -+ }; -+ -+ ehrpwm1_pin_p9_16: pinmux_ehrpwm1_pin_p9_16 { -+ pinctrl-single,pins = < -+ 0x04c 0x6 /* P9_16 (ZCZ ball T14) | MODE 6 */ -+ >; -+ }; -+ -+ ecap0_pin_p9_42: pinmux_ecap0_pin_p9_42 { -+ pinctrl-single,pins = < -+ 0x164 0x0 /* P9_42 (ZCZ ball C18) | MODE 0 */ -+ >; -+ }; - }; - - &uart0 { -@@ -184,6 +252,20 @@ - status = "okay"; - }; - -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ -+ status = "okay"; -+}; -+ - &usb { - status = "okay"; - }; -@@ -285,6 +367,55 @@ - }; - }; - -+&epwmss0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ecap0_pin_p9_42>; -+ status = "okay"; -+ -+ ecap@48300100 { -+ status = "okay"; -+ }; -+}; -+ -+&epwmss1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = < -+ &ehrpwm1_pin_p9_14 -+ &ehrpwm1_pin_p9_16 -+ >; -+ -+ status = "okay"; -+ -+ ehrpwm@48302200 { -+ status = "okay"; -+ }; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins>; -+ status = "okay"; -+ -+ spidev0: spi@0 { -+ compatible = "spidev"; -+ reg = <0>; -+ spi-max-frequency = <16000000>; -+ spi-cpha; -+ }; -+ -+ spidev1: spi@1 { -+ compatible = "spidev"; -+ reg = <1>; -+ spi-max-frequency = <16000000>; -+ }; -+}; -+ -+&tscadc { -+ status = "okay"; -+ adc { -+ ti,adc-channels = <4 5 6>; -+ }; -+}; - - /include/ "tps65217.dtsi" - -@@ -393,4 +524,44 @@ - - &sham { - status = "okay"; -+ -+}; -+ -+/ { -+ ocp { -+ //FIXME: these pwm's still need work, this guild isn't working.. -+ //http://elinux.org/EBC_Exercise_13_Pulse_Width_Modulation -+ pwm_test_P9_14@0 { -+ compatible = "pwm_test"; -+ pwms = <&ehrpwm1 0 500000 1>; -+ pwm-names = "PWM_P9_14"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ehrpwm1_pin_p9_14>; -+ enabled = <1>; -+ duty = <0>; -+ status = "okay"; -+ }; -+ -+ pwm_test_P9_16@0 { -+ compatible = "pwm_test"; -+ pwms = <&ehrpwm1 0 500000 1>; -+ pwm-names = "PWM_P9_16"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ehrpwm1_pin_p9_16>; -+ enabled = <1>; -+ duty = <0>; -+ status = "okay"; -+ }; -+ -+ pwm_test_P9_42 { -+ compatible = "pwm_test"; -+ pwms = <&ecap0 0 500000 1>; -+ pwm-names = "PWM_P9_42"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ecap0_pin_p9_42>; -+ enabled = <1>; -+ duty = <0>; -+ status = "okay"; -+ }; -+ }; - }; diff --git a/arm-dts-am335x-boneblack-add-cpu0-opp-points.patch b/arm-dts-am335x-boneblack-add-cpu0-opp-points.patch deleted file mode 100644 index edd9a3c..0000000 --- a/arm-dts-am335x-boneblack-add-cpu0-opp-points.patch +++ /dev/null @@ -1,38 +0,0 @@ -From: Robert Nelson -Date: Fri, 27 Dec 2013 13:14:19 -0600 -Subject: [PATCH] arm: dts: am335x-boneblack: add cpu0 opp points - -Signed-off-by: Robert Nelson ---- - arch/arm/boot/dts/am335x-boneblack.dts | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - -diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts -index 0fd89c38cf02..20660917a06f 100644 ---- a/arch/arm/boot/dts/am335x-boneblack.dts -+++ b/arch/arm/boot/dts/am335x-boneblack.dts -@@ -71,6 +71,24 @@ - }; - - / { -+ cpus { -+ cpu@0 { -+ cpu0-supply = <&dcdc2_reg>; -+ /* -+ * To consider voltage drop between PMIC and SoC, -+ * tolerance value is reduced to 2% from 4% and -+ * voltage value is increased as a precaution. -+ */ -+ operating-points = < -+ /* kHz uV */ -+ 1000000 1325000 -+ 800000 1300000 -+ 600000 1112000 -+ 300000 969000 -+ >; -+ }; -+ }; -+ - hdmi { - compatible = "ti,tilcdc,slave"; - i2c = <&i2c0>; diff --git a/arm-dts-am335x-boneblack-lcdc-add-panel-info.patch b/arm-dts-am335x-boneblack-lcdc-add-panel-info.patch deleted file mode 100644 index 97f31f6..0000000 --- a/arm-dts-am335x-boneblack-lcdc-add-panel-info.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: Robert Nelson -Date: Fri, 27 Dec 2013 13:05:09 -0600 -Subject: [PATCH] arm: dts: am335x-boneblack: lcdc add panel-info - -Bugzilla: 1012025 -Upstream-status: In beagle github repository https://github.com/beagleboard/kernel - -Signed-off-by: Robert Nelson ---- - arch/arm/boot/dts/am335x-boneblack.dts | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - -diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts -index 5c42d259fa68..0fd89c38cf02 100644 ---- a/arch/arm/boot/dts/am335x-boneblack.dts -+++ b/arch/arm/boot/dts/am335x-boneblack.dts -@@ -78,6 +78,19 @@ - pinctrl-0 = <&nxp_hdmi_bonelt_pins>; - pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; - status = "okay"; -+ -+ panel-info { -+ bpp = <16>; -+ ac-bias = <255>; -+ ac-bias-intrpt = <0>; -+ dma-burst-sz = <16>; -+ fdd = <16>; -+ sync-edge = <1>; -+ sync-ctrl = <1>; -+ raster-order = <0>; -+ fifo-th = <0>; -+ invert-pxl-clk; -+ }; - }; - }; - diff --git a/arm-highbank-l2-reverts.patch b/arm-highbank-l2-reverts.patch deleted file mode 100644 index 9f0f89e..0000000 --- a/arm-highbank-l2-reverts.patch +++ /dev/null @@ -1,57 +0,0 @@ -From: Kyle McMartin -Date: Tue, 30 Sep 2014 16:19:47 -0400 -Subject: [PATCH] arm: highbank l2 reverts - -Revert some v3.16 changes to mach-highbank which broke L2 cache enablement. -Will debug upstream separately, but we need F22/21 running there. (#1139762) ---- - arch/arm/mach-highbank/highbank.c | 21 ++++++++++++--------- - 1 file changed, 12 insertions(+), 9 deletions(-) - -diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c -index 231fba0d03e5..0de5a6ddd5eb 100644 ---- a/arch/arm/mach-highbank/highbank.c -+++ b/arch/arm/mach-highbank/highbank.c -@@ -51,13 +51,11 @@ static void __init highbank_scu_map_io(void) - } - - --static void highbank_l2c310_write_sec(unsigned long val, unsigned reg) -+static void highbank_l2x0_disable(void) - { -- if (reg == L2X0_CTRL) -- highbank_smc1(0x102, val); -- else -- WARN_ONCE(1, "Highbank L2C310: ignoring write to reg 0x%x\n", -- reg); -+ outer_flush_all(); -+ /* Disable PL310 L2 Cache controller */ -+ highbank_smc1(0x102, 0x0); - } - - static void __init highbank_init_irq(void) -@@ -66,6 +64,14 @@ static void __init highbank_init_irq(void) - - if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) - highbank_scu_map_io(); -+ -+ /* Enable PL310 L2 Cache controller */ -+ if (IS_ENABLED(CONFIG_CACHE_L2X0) && -+ of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) { -+ highbank_smc1(0x102, 0x1); -+ l2x0_of_init(0, ~0); -+ outer_cache.disable = highbank_l2x0_disable; -+ } - } - - static void highbank_power_off(void) -@@ -179,9 +185,6 @@ DT_MACHINE_START(HIGHBANK, "Highbank") - #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) - .dma_zone_size = (4ULL * SZ_1G), - #endif -- .l2c_aux_val = 0, -- .l2c_aux_mask = ~0, -- .l2c_write_sec = highbank_l2c310_write_sec, - .init_irq = highbank_init_irq, - .init_machine = highbank_init, - .dt_compat = highbank_match, diff --git a/kernel.spec b/kernel.spec index 1d07ca5..0f24648 100644 --- a/kernel.spec +++ b/kernel.spec @@ -504,20 +504,8 @@ Patch456: arm64-acpi-drop-expert-patch.patch Patch457: ARM-tegra-usb-no-reset.patch -Patch458: arm-dts-am335x-boneblack-lcdc-add-panel-info.patch - -Patch459: arm-dts-am335x-boneblack-add-cpu0-opp-points.patch - -Patch460: arm-dts-am335x-bone-common-setup-default-pinmux-http.patch - -Patch461: arm-dts-am335x-bone-common-add-uart2_pins-uart4_pins.patch - -Patch462: pinctrl-pinctrl-single-must-be-initialized-early.patch - Patch463: arm-i.MX6-Utilite-device-dtb.patch -Patch464: arm-highbank-l2-reverts.patch - Patch465: Revert-Revert-ACPI-video-change-acpi-video-brightnes.patch Patch466: input-kill-stupid-messages.patch diff --git a/pinctrl-pinctrl-single-must-be-initialized-early.patch b/pinctrl-pinctrl-single-must-be-initialized-early.patch deleted file mode 100644 index 58867a9..0000000 --- a/pinctrl-pinctrl-single-must-be-initialized-early.patch +++ /dev/null @@ -1,34 +0,0 @@ -From: Pantelis Antoniou -Date: Sat, 15 Sep 2012 12:00:41 +0300 -Subject: [PATCH] pinctrl: pinctrl-single must be initialized early. - -When using pinctrl-single to handle i2c initialization, it has -to be done early. Whether this is the best way to do so, is an -exercise left to the reader. ---- - drivers/pinctrl/pinctrl-single.c | 12 +++++++++++- - 1 file changed, 11 insertions(+), 1 deletion(-) - -diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c -index b2de09d3b1a0..bced65ec07cc 100644 ---- a/drivers/pinctrl/pinctrl-single.c -+++ b/drivers/pinctrl/pinctrl-single.c -@@ -2025,7 +2025,17 @@ static struct platform_driver pcs_driver = { - #endif - }; - --module_platform_driver(pcs_driver); -+static int __init pcs_init(void) -+{ -+ return platform_driver_register(&pcs_driver); -+} -+postcore_initcall(pcs_init); -+ -+static void __exit pcs_exit(void) -+{ -+ platform_driver_unregister(&pcs_driver); -+} -+module_exit(pcs_exit); - - MODULE_AUTHOR("Tony Lindgren "); - MODULE_DESCRIPTION("One-register-per-pin type device tree based pinctrl driver");