drivers/staging/Kconfig | 2 + drivers/staging/Makefile | 1 + drivers/staging/lirc/Kconfig | 111 +++ drivers/staging/lirc/Makefile | 19 + drivers/staging/lirc/TODO | 8 + drivers/staging/lirc/TODO.lirc_i2c | 3 + drivers/staging/lirc/lirc_bt829.c | 383 +++++++++ drivers/staging/lirc/lirc_ene0100.c | 646 ++++++++++++++ drivers/staging/lirc/lirc_ene0100.h | 169 ++++ drivers/staging/lirc/lirc_i2c.c | 536 ++++++++++++ drivers/staging/lirc/lirc_igorplugusb.c | 555 ++++++++++++ drivers/staging/lirc/lirc_imon.c | 1058 +++++++++++++++++++++++ drivers/staging/lirc/lirc_it87.c | 1022 +++++++++++++++++++++++ drivers/staging/lirc/lirc_it87.h | 116 +++ drivers/staging/lirc/lirc_ite8709.c | 542 ++++++++++++ drivers/staging/lirc/lirc_parallel.c | 705 ++++++++++++++++ drivers/staging/lirc/lirc_parallel.h | 26 + drivers/staging/lirc/lirc_sasem.c | 933 +++++++++++++++++++++ drivers/staging/lirc/lirc_serial.c | 1313 +++++++++++++++++++++++++++++ drivers/staging/lirc/lirc_sir.c | 1282 ++++++++++++++++++++++++++++ drivers/staging/lirc/lirc_streamzap.c | 821 ++++++++++++++++++ drivers/staging/lirc/lirc_ttusbir.c | 396 +++++++++ drivers/staging/lirc/lirc_zilog.c | 1387 +++++++++++++++++++++++++++++++ 23 files changed, 12034 insertions(+), 0 deletions(-) diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 984a754..9296517 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -147,5 +147,7 @@ source "drivers/staging/mrst-touchscreen/Kconfig" source "drivers/staging/msm/Kconfig" +source "drivers/staging/lirc/Kconfig" + endif # !STAGING_EXCLUDE_BUILD endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 9fa2513..6c5b523 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SLICOSS) += slicoss/ obj-$(CONFIG_VIDEO_GO7007) += go7007/ obj-$(CONFIG_VIDEO_CX25821) += cx25821/ obj-$(CONFIG_VIDEO_TM6000) += tm6000/ +obj-$(CONFIG_LIRC_STAGING) += lirc/ obj-$(CONFIG_USB_IP_COMMON) += usbip/ obj-$(CONFIG_W35UND) += winbond/ obj-$(CONFIG_PRISM2_USB) += wlan-ng/ diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig new file mode 100644 index 0000000..ab30a09 --- /dev/null +++ b/drivers/staging/lirc/Kconfig @@ -0,0 +1,111 @@ +# +# LIRC driver(s) configuration +# +menuconfig LIRC_STAGING + bool "Linux Infrared Remote Control IR receiver/transmitter drivers" + depends on LIRC + help + Say Y here, and all supported Linux Infrared Remote Control IR and + RF receiver and transmitter drivers will be displayed. When paired + with a remote control and the lirc daemon, the receiver drivers + allow control of your Linux system via remote control. + +if LIRC_STAGING + +config LIRC_BT829 + tristate "BT829 based hardware" + depends on LIRC_STAGING && PCI + help + Driver for the IR interface on BT829-based hardware + +config LIRC_ENE0100 + tristate "ENE KB3924/ENE0100 CIR Port Reciever" + depends on LIRC_STAGING && PNP + help + This is a driver for CIR port handled by ENE KB3924 embedded + controller found on some notebooks. + It appears on PNP list as ENE0100. + +config LIRC_I2C + tristate "I2C Based IR Receivers" + depends on LIRC_STAGING && I2C + help + Driver for I2C-based IR receivers, such as those commonly + found onboard Hauppauge PVR-150/250/350 video capture cards + +config LIRC_IGORPLUGUSB + tristate "Igor Cesko's USB IR Receiver" + depends on LIRC_STAGING && USB + help + Driver for Igor Cesko's USB IR Receiver + +config LIRC_IMON + tristate "Legacy SoundGraph iMON Receiver and Display" + depends on LIRC_STAGING && USB + help + Driver for the original SoundGraph iMON IR Receiver and Display + + Current generation iMON devices use the input layer imon driver. + +config LIRC_IT87 + tristate "ITE IT87XX CIR Port Receiver" + depends on LIRC_STAGING && PNP + help + Driver for the ITE IT87xx IR Receiver + +config LIRC_ITE8709 + tristate "ITE8709 CIR Port Receiver" + depends on LIRC_STAGING && PNP + help + Driver for the ITE8709 IR Receiver + +config LIRC_PARALLEL + tristate "Homebrew Parallel Port Receiver" + depends on LIRC_STAGING && PARPORT && !SMP + help + Driver for Homebrew Parallel Port Receivers + +config LIRC_SASEM + tristate "Sasem USB IR Remote" + depends on LIRC_STAGING && USB + help + Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module + +config LIRC_SERIAL + tristate "Homebrew Serial Port Receiver" + depends on LIRC_STAGING + help + Driver for Homebrew Serial Port Receivers + +config LIRC_SERIAL_TRANSMITTER + bool "Serial Port Transmitter" + default y + depends on LIRC_SERIAL + help + Serial Port Transmitter support + +config LIRC_SIR + tristate "Built-in SIR IrDA port" + depends on LIRC_STAGING + help + Driver for the SIR IrDA port + +config LIRC_STREAMZAP + tristate "Streamzap PC Receiver" + depends on LIRC_STAGING && USB + help + Driver for the Streamzap PC Receiver + +config LIRC_TTUSBIR + tristate "Technotrend USB IR Receiver" + depends on LIRC_STAGING && USB + help + Driver for the Technotrend USB IR Receiver + +config LIRC_ZILOG + tristate "Zilog/Hauppauge IR Transmitter" + depends on LIRC_STAGING && I2C + help + Driver for the Zilog/Hauppauge IR Transmitter, found on + PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards +endif diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/lirc/Makefile new file mode 100644 index 0000000..a019182 --- /dev/null +++ b/drivers/staging/lirc/Makefile @@ -0,0 +1,19 @@ +# Makefile for the lirc drivers. +# + +# Each configuration option enables a list of files. + +obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o +obj-$(CONFIG_LIRC_ENE0100) += lirc_ene0100.o +obj-$(CONFIG_LIRC_I2C) += lirc_i2c.o +obj-$(CONFIG_LIRC_IGORPLUGUSB) += lirc_igorplugusb.o +obj-$(CONFIG_LIRC_IMON) += lirc_imon.o +obj-$(CONFIG_LIRC_IT87) += lirc_it87.o +obj-$(CONFIG_LIRC_ITE8709) += lirc_ite8709.o +obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o +obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o +obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o +obj-$(CONFIG_LIRC_SIR) += lirc_sir.o +obj-$(CONFIG_LIRC_STREAMZAP) += lirc_streamzap.o +obj-$(CONFIG_LIRC_TTUSBIR) += lirc_ttusbir.o +obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o diff --git a/drivers/staging/lirc/TODO b/drivers/staging/lirc/TODO new file mode 100644 index 0000000..b6cb593 --- /dev/null +++ b/drivers/staging/lirc/TODO @@ -0,0 +1,8 @@ +- All drivers should either be ported to ir-core, or dropped entirely + (see drivers/media/IR/mceusb.c vs. lirc_mceusb.c in lirc cvs for an + example of a previously completed port). + +Please send patches to: +Jarod Wilson +Greg Kroah-Hartman + diff --git a/drivers/staging/lirc/TODO.lirc_i2c b/drivers/staging/lirc/TODO.lirc_i2c new file mode 100644 index 0000000..1f0a6ff --- /dev/null +++ b/drivers/staging/lirc/TODO.lirc_i2c @@ -0,0 +1,3 @@ +lirc_i2c provides support for some drivers that have already a RC +driver under drivers/media/video. It should be integrated into those +drivers, in special with drivers/media/video/ir-kbd-i2c.c. diff --git a/drivers/staging/lirc/lirc_bt829.c b/drivers/staging/lirc/lirc_bt829.c new file mode 100644 index 0000000..3388102 --- /dev/null +++ b/drivers/staging/lirc/lirc_bt829.c @@ -0,0 +1,383 @@ +/* + * Remote control driver for the TV-card based on bt829 + * + * by Leonid Froenchenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include + +static int poll_main(void); +static int atir_init_start(void); + +static void write_index(unsigned char index, unsigned int value); +static unsigned int read_index(unsigned char index); + +static void do_i2c_start(void); +static void do_i2c_stop(void); + +static void seems_wr_byte(unsigned char al); +static unsigned char seems_rd_byte(void); + +static unsigned int read_index(unsigned char al); +static void write_index(unsigned char ah, unsigned int edx); + +static void cycle_delay(int cycle); + +static void do_set_bits(unsigned char bl); +static unsigned char do_get_bits(void); + +#define DATA_PCI_OFF 0x7FFC00 +#define WAIT_CYCLE 20 + +#define DRIVER_NAME "lirc_bt829" + +static int debug; +#define dprintk(fmt, args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG DRIVER_NAME ": "fmt, ## args); \ + } while (0) + +static int atir_minor; +static unsigned long pci_addr_phys; +static unsigned char *pci_addr_lin; + +static struct lirc_driver atir_driver; + +static struct pci_dev *do_pci_probe(void) +{ + struct pci_dev *my_dev; + my_dev = pci_get_device(PCI_VENDOR_ID_ATI, + PCI_DEVICE_ID_ATI_264VT, NULL); + if (my_dev) { + printk(KERN_ERR DRIVER_NAME ": Using device: %s\n", + pci_name(my_dev)); + pci_addr_phys = 0; + if (my_dev->resource[0].flags & IORESOURCE_MEM) { + pci_addr_phys = my_dev->resource[0].start; + printk(KERN_INFO DRIVER_NAME ": memory at 0x%08X\n", + (unsigned int)pci_addr_phys); + } + if (pci_addr_phys == 0) { + printk(KERN_ERR DRIVER_NAME ": no memory resource ?\n"); + return NULL; + } + } else { + printk(KERN_ERR DRIVER_NAME ": pci_probe failed\n"); + return NULL; + } + return my_dev; +} + +static int atir_add_to_buf(void *data, struct lirc_buffer *buf) +{ + unsigned char key; + int status; + status = poll_main(); + key = (status >> 8) & 0xFF; + if (status & 0xFF) { + dprintk("reading key %02X\n", key); + lirc_buffer_write(buf, &key); + return 0; + } + return -ENODATA; +} + +static int atir_set_use_inc(void *data) +{ + dprintk("driver is opened\n"); + return 0; +} + +static void atir_set_use_dec(void *data) +{ + dprintk("driver is closed\n"); +} + +int init_module(void) +{ + struct pci_dev *pdev; + + pdev = do_pci_probe(); + if (pdev == NULL) + return 1; + + if (!atir_init_start()) + return 1; + + strcpy(atir_driver.name, "ATIR"); + atir_driver.minor = -1; + atir_driver.code_length = 8; + atir_driver.sample_rate = 10; + atir_driver.data = 0; + atir_driver.add_to_buf = atir_add_to_buf; + atir_driver.set_use_inc = atir_set_use_inc; + atir_driver.set_use_dec = atir_set_use_dec; + atir_driver.dev = &pdev->dev; + atir_driver.owner = THIS_MODULE; + + atir_minor = lirc_register_driver(&atir_driver); + if (atir_minor < 0) { + printk(KERN_ERR DRIVER_NAME ": failed to register driver!\n"); + return atir_minor; + } + dprintk("driver is registered on minor %d\n", atir_minor); + + return 0; +} + + +void cleanup_module(void) +{ + lirc_unregister_driver(atir_minor); +} + + +static int atir_init_start(void) +{ + pci_addr_lin = ioremap(pci_addr_phys + DATA_PCI_OFF, 0x400); + if (pci_addr_lin == 0) { + printk(KERN_INFO DRIVER_NAME ": pci mem must be mapped\n"); + return 0; + } + return 1; +} + +static void cycle_delay(int cycle) +{ + udelay(WAIT_CYCLE*cycle); +} + + +static int poll_main() +{ + unsigned char status_high, status_low; + + do_i2c_start(); + + seems_wr_byte(0xAA); + seems_wr_byte(0x01); + + do_i2c_start(); + + seems_wr_byte(0xAB); + + status_low = seems_rd_byte(); + status_high = seems_rd_byte(); + + do_i2c_stop(); + + return (status_high << 8) | status_low; +} + +static void do_i2c_start(void) +{ + do_set_bits(3); + cycle_delay(4); + + do_set_bits(1); + cycle_delay(7); + + do_set_bits(0); + cycle_delay(2); +} + +static void do_i2c_stop(void) +{ + unsigned char bits; + bits = do_get_bits() & 0xFD; + do_set_bits(bits); + cycle_delay(1); + + bits |= 1; + do_set_bits(bits); + cycle_delay(2); + + bits |= 2; + do_set_bits(bits); + bits = 3; + do_set_bits(bits); + cycle_delay(2); +} + +static void seems_wr_byte(unsigned char value) +{ + int i; + unsigned char reg; + + reg = do_get_bits(); + for (i = 0; i < 8; i++) { + if (value & 0x80) + reg |= 0x02; + else + reg &= 0xFD; + + do_set_bits(reg); + cycle_delay(1); + + reg |= 1; + do_set_bits(reg); + cycle_delay(1); + + reg &= 0xFE; + do_set_bits(reg); + cycle_delay(1); + value <<= 1; + } + cycle_delay(2); + + reg |= 2; + do_set_bits(reg); + + reg |= 1; + do_set_bits(reg); + + cycle_delay(1); + do_get_bits(); + + reg &= 0xFE; + do_set_bits(reg); + cycle_delay(3); +} + +static unsigned char seems_rd_byte(void) +{ + int i; + int rd_byte; + unsigned char bits_2, bits_1; + + bits_1 = do_get_bits() | 2; + do_set_bits(bits_1); + + rd_byte = 0; + for (i = 0; i < 8; i++) { + bits_1 &= 0xFE; + do_set_bits(bits_1); + cycle_delay(2); + + bits_1 |= 1; + do_set_bits(bits_1); + cycle_delay(1); + + bits_2 = do_get_bits(); + if (bits_2 & 2) + rd_byte |= 1; + + rd_byte <<= 1; + } + + bits_1 = 0; + if (bits_2 == 0) + bits_1 |= 2; + + do_set_bits(bits_1); + cycle_delay(2); + + bits_1 |= 1; + do_set_bits(bits_1); + cycle_delay(3); + + bits_1 &= 0xFE; + do_set_bits(bits_1); + cycle_delay(2); + + rd_byte >>= 1; + rd_byte &= 0xFF; + return rd_byte; +} + +static void do_set_bits(unsigned char new_bits) +{ + int reg_val; + reg_val = read_index(0x34); + if (new_bits & 2) { + reg_val &= 0xFFFFFFDF; + reg_val |= 1; + } else { + reg_val &= 0xFFFFFFFE; + reg_val |= 0x20; + } + reg_val |= 0x10; + write_index(0x34, reg_val); + + reg_val = read_index(0x31); + if (new_bits & 1) + reg_val |= 0x1000000; + else + reg_val &= 0xFEFFFFFF; + + reg_val |= 0x8000000; + write_index(0x31, reg_val); +} + +static unsigned char do_get_bits(void) +{ + unsigned char bits; + int reg_val; + + reg_val = read_index(0x34); + reg_val |= 0x10; + reg_val &= 0xFFFFFFDF; + write_index(0x34, reg_val); + + reg_val = read_index(0x34); + bits = 0; + if (reg_val & 8) + bits |= 2; + else + bits &= 0xFD; + + reg_val = read_index(0x31); + if (reg_val & 0x1000000) + bits |= 1; + else + bits &= 0xFE; + + return bits; +} + +static unsigned int read_index(unsigned char index) +{ + unsigned char *addr; + unsigned int value; + /* addr = pci_addr_lin + DATA_PCI_OFF + ((index & 0xFF) << 2); */ + addr = pci_addr_lin + ((index & 0xFF) << 2); + value = readl(addr); + return value; +} + +static void write_index(unsigned char index, unsigned int reg_val) +{ + unsigned char *addr; + addr = pci_addr_lin + ((index & 0xFF) << 2); + writel(reg_val, addr); +} + +MODULE_AUTHOR("Froenchenko Leonid"); +MODULE_DESCRIPTION("IR remote driver for bt829 based TV cards"); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/staging/lirc/lirc_ene0100.c b/drivers/staging/lirc/lirc_ene0100.c new file mode 100644 index 0000000..a152c52 --- /dev/null +++ b/drivers/staging/lirc/lirc_ene0100.c @@ -0,0 +1,646 @@ +/* + * driver for ENE KB3926 B/C/D CIR (also known as ENE0100) + * + * Copyright (C) 2009 Maxim Levitsky + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include +#include +#include +#include +#include +#include +#include "lirc_ene0100.h" + +static int sample_period = 75; +static int enable_idle = 1; +static int enable_learning; + +static void ene_set_idle(struct ene_device *dev, int idle); +static void ene_set_inputs(struct ene_device *dev, int enable); + +/* read a hardware register */ +static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg) +{ + outb(reg >> 8, dev->hw_io + ENE_ADDR_HI); + outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO); + return inb(dev->hw_io + ENE_IO); +} + +/* write a hardware register */ +static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value) +{ + outb(reg >> 8, dev->hw_io + ENE_ADDR_HI); + outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO); + outb(value, dev->hw_io + ENE_IO); +} + +/* change specific bits in hardware register */ +static void ene_hw_write_reg_mask(struct ene_device *dev, + u16 reg, u8 value, u8 mask) +{ + u8 regvalue; + + outb(reg >> 8, dev->hw_io + ENE_ADDR_HI); + outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO); + + regvalue = inb(dev->hw_io + ENE_IO) & ~mask; + regvalue |= (value & mask); + outb(regvalue, dev->hw_io + ENE_IO); +} + +/* read irq status and ack it */ +static int ene_hw_irq_status(struct ene_device *dev, int *buffer_pointer) +{ + u8 irq_status; + u8 fw_flags1, fw_flags2; + + fw_flags2 = ene_hw_read_reg(dev, ENE_FW2); + + if (buffer_pointer) + *buffer_pointer = 4 * (fw_flags2 & ENE_FW2_BUF_HIGH); + + if (dev->hw_revision < ENE_HW_C) { + irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS); + + if (!(irq_status & ENEB_IRQ_STATUS_IR)) + return 0; + ene_hw_write_reg(dev, ENEB_IRQ_STATUS, + irq_status & ~ENEB_IRQ_STATUS_IR); + + /* rev B support only recieving */ + return ENE_IRQ_RX; + } + + irq_status = ene_hw_read_reg(dev, ENEC_IRQ); + + if (!(irq_status & ENEC_IRQ_STATUS)) + return 0; + + /* original driver does that twice - a workaround ? */ + ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS); + ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS); + + /* clear unknown flag in F8F9 */ + if (fw_flags2 & ENE_FW2_IRQ_CLR) + ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR); + + /* check if this is a TX interrupt */ + fw_flags1 = ene_hw_read_reg(dev, ENE_FW1); + + if (fw_flags1 & ENE_FW1_TXIRQ) { + ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ); + return ENE_IRQ_TX; + } else + return ENE_IRQ_RX; +} + +static int ene_hw_detect(struct ene_device *dev) +{ + u8 chip_major, chip_minor; + u8 hw_revision, old_ver; + u8 tmp; + u8 fw_capabilities; + + tmp = ene_hw_read_reg(dev, ENE_HW_UNK); + ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR); + + chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR); + chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR); + + ene_hw_write_reg(dev, ENE_HW_UNK, tmp); + hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION); + old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD); + + if (hw_revision == 0xFF) { + + ene_printk(KERN_WARNING, "device seems to be disabled\n"); + ene_printk(KERN_WARNING, + "send a mail to lirc-list@lists.sourceforge.net\n"); + ene_printk(KERN_WARNING, "please attach output of acpidump\n"); + + return -ENODEV; + } + + if (chip_major == 0x33) { + ene_printk(KERN_WARNING, "chips 0x33xx aren't supported yet\n"); + return -ENODEV; + } + + if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) { + dev->hw_revision = ENE_HW_C; + ene_printk(KERN_WARNING, + "KB3926C detected, driver support is not complete!\n"); + + } else if (old_ver == 0x24 && hw_revision == 0xC0) { + dev->hw_revision = ENE_HW_B; + ene_printk(KERN_NOTICE, "KB3926B detected\n"); + } else { + dev->hw_revision = ENE_HW_D; + ene_printk(KERN_WARNING, + "unknown ENE chip detected, assuming KB3926D\n"); + ene_printk(KERN_WARNING, "driver support incomplete"); + + } + + ene_printk(KERN_DEBUG, "chip is 0x%02x%02x - 0x%02x, 0x%02x\n", + chip_major, chip_minor, old_ver, hw_revision); + + + /* detect features hardware supports */ + + if (dev->hw_revision < ENE_HW_C) + return 0; + + fw_capabilities = ene_hw_read_reg(dev, ENE_FW2); + + dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN; + dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING; + + dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable && + fw_capabilities & ENE_FW2_FAN_AS_NRML_IN; + + ene_printk(KERN_NOTICE, "hardware features:\n"); + ene_printk(KERN_NOTICE, + "learning and tx %s, gpio40_learn %s, fan_in %s\n", + dev->hw_learning_and_tx_capable ? "on" : "off", + dev->hw_gpio40_learning ? "on" : "off", + dev->hw_fan_as_normal_input ? "on" : "off"); + + if (!dev->hw_learning_and_tx_capable && enable_learning) + enable_learning = 0; + + if (dev->hw_learning_and_tx_capable) { + ene_printk(KERN_WARNING, + "Device supports transmitting, but the driver doesn't\n"); + ene_printk(KERN_WARNING, + "due to lack of hardware to test against.\n"); + ene_printk(KERN_WARNING, + "Send a mail to: lirc-list@lists.sourceforge.net\n"); + } + return 0; +} + +/* hardware initialization */ +static int ene_hw_init(void *data) +{ + u8 reg_value; + struct ene_device *dev = (struct ene_device *)data; + dev->in_use = 1; + + if (dev->hw_revision < ENE_HW_C) { + ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1); + ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01); + } else { + reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0; + reg_value |= ENEC_IRQ_UNK_EN; + reg_value &= ~ENEC_IRQ_STATUS; + reg_value |= (dev->irq & ENEC_IRQ_MASK); + ene_hw_write_reg(dev, ENEC_IRQ, reg_value); + ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63); + } + + ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00); + ene_set_inputs(dev, enable_learning); + + /* set sampling period */ + ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period); + + /* ack any pending irqs - just in case */ + ene_hw_irq_status(dev, NULL); + + /* enter idle mode */ + ene_set_idle(dev, 1); + + /* enable firmware bits */ + ene_hw_write_reg_mask(dev, ENE_FW1, + ENE_FW1_ENABLE | ENE_FW1_IRQ, + ENE_FW1_ENABLE | ENE_FW1_IRQ); + /* clear stats */ + dev->sample = 0; + return 0; +} + +/* this enables gpio40 signal, used if connected to wide band input*/ +static void ene_enable_gpio40(struct ene_device *dev, int enable) +{ + ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, enable ? + 0 : ENE_CIR_CONF2_GPIO40DIS, + ENE_CIR_CONF2_GPIO40DIS); +} + +/* this enables the classic sampler */ +static void ene_enable_normal_recieve(struct ene_device *dev, int enable) +{ + ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_ADC_ON : 0); +} + +/* this enables recieve via fan input */ +static void ene_enable_fan_recieve(struct ene_device *dev, int enable) +{ + if (!enable) + ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0); + else { + ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN); + ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN); + } + dev->fan_input_inuse = enable; +} + +/* determine which input to use*/ +static void ene_set_inputs(struct ene_device *dev, int learning_enable) +{ + ene_enable_normal_recieve(dev, 1); + + /* old hardware doesn't support learning mode for sure */ + if (dev->hw_revision <= ENE_HW_B) + return; + + /* reciever not learning capable, still set gpio40 correctly */ + if (!dev->hw_learning_and_tx_capable) { + ene_enable_gpio40(dev, !dev->hw_gpio40_learning); + return; + } + + /* enable learning mode */ + if (learning_enable) { + ene_enable_gpio40(dev, dev->hw_gpio40_learning); + + /* fan input is not used for learning */ + if (dev->hw_fan_as_normal_input) + ene_enable_fan_recieve(dev, 0); + + /* disable learning mode */ + } else { + if (dev->hw_fan_as_normal_input) { + ene_enable_fan_recieve(dev, 1); + ene_enable_normal_recieve(dev, 0); + } else + ene_enable_gpio40(dev, !dev->hw_gpio40_learning); + } + + /* set few additional settings for this mode */ + ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_enable ? + ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1); + + ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_enable ? + ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2); +} + +/* deinitialization */ +static void ene_hw_deinit(void *data) +{ + struct ene_device *dev = (struct ene_device *)data; + + /* disable samplers */ + ene_enable_normal_recieve(dev, 0); + + if (dev->hw_fan_as_normal_input) + ene_enable_fan_recieve(dev, 0); + + /* disable hardware IRQ and firmware flag */ + ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ); + + ene_set_idle(dev, 1); + dev->in_use = 0; +} + +/* sends current sample to userspace */ +static void send_sample(struct ene_device *dev) +{ + int value = abs(dev->sample) & PULSE_MASK; + + if (dev->sample > 0) + value |= PULSE_BIT; + + if (!lirc_buffer_full(dev->lirc_driver->rbuf)) { + lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&value); + wake_up(&dev->lirc_driver->rbuf->wait_poll); + } + dev->sample = 0; +} + +/* this updates current sample */ +static void update_sample(struct ene_device *dev, int sample) +{ + if (!dev->sample) + dev->sample = sample; + else if (same_sign(dev->sample, sample)) + dev->sample += sample; + else { + send_sample(dev); + dev->sample = sample; + } +} + +/* enable or disable idle mode */ +static void ene_set_idle(struct ene_device *dev, int idle) +{ + struct timeval now; + int disable = idle && enable_idle && (dev->hw_revision < ENE_HW_C); + + ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD, + disable ? 0 : ENE_CIR_SAMPLE_OVERFLOW, + ENE_CIR_SAMPLE_OVERFLOW); + dev->idle = idle; + + /* remember when we have entered the idle mode */ + if (idle) { + do_gettimeofday(&dev->gap_start); + return; + } + + /* send the gap between keypresses now */ + do_gettimeofday(&now); + + if (now.tv_sec - dev->gap_start.tv_sec > 16) + dev->sample = space(PULSE_MASK); + else + dev->sample = dev->sample + + space(1000000ull * (now.tv_sec - dev->gap_start.tv_sec)) + + space(now.tv_usec - dev->gap_start.tv_usec); + + if (abs(dev->sample) > PULSE_MASK) + dev->sample = space(PULSE_MASK); + send_sample(dev); +} + +/* interrupt handler */ +static irqreturn_t ene_hw_irq(int irq, void *data) +{ + u16 hw_value; + int i, hw_sample; + int space; + int buffer_pointer; + int irq_status; + + struct ene_device *dev = (struct ene_device *)data; + irq_status = ene_hw_irq_status(dev, &buffer_pointer); + + if (!irq_status) + return IRQ_NONE; + + /* TODO: only RX for now */ + if (irq_status == ENE_IRQ_TX) + return IRQ_HANDLED; + + for (i = 0; i < ENE_SAMPLES_SIZE; i++) { + + hw_value = ene_hw_read_reg(dev, + ENE_SAMPLE_BUFFER + buffer_pointer + i); + + if (dev->fan_input_inuse) { + /* read high part of the sample */ + hw_value |= ene_hw_read_reg(dev, + ENE_SAMPLE_BUFFER_FAN + buffer_pointer + i) << 8; + + /* test for _space_ bit */ + space = !(hw_value & ENE_FAN_SMPL_PULS_MSK); + + /* clear space bit, and other unused bits */ + hw_value &= ENE_FAN_VALUE_MASK; + hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN; + + } else { + space = hw_value & ENE_SAMPLE_SPC_MASK; + hw_value &= ENE_SAMPLE_VALUE_MASK; + hw_sample = hw_value * sample_period; + } + + /* no more data */ + if (!(hw_value)) + break; + + if (space) + hw_sample *= -1; + + /* overflow sample recieved, handle it */ + + if (!dev->fan_input_inuse && hw_value == ENE_SAMPLE_OVERFLOW) { + + if (dev->idle) + continue; + + if (dev->sample > 0 || abs(dev->sample) <= ENE_MAXGAP) + update_sample(dev, hw_sample); + else + ene_set_idle(dev, 1); + + continue; + } + + /* normal first sample recieved */ + if (!dev->fan_input_inuse && dev->idle) { + ene_set_idle(dev, 0); + + /* discard first recieved value, its random + since its the time signal was off before + first pulse if idle mode is enabled, HW + does that for us */ + + if (!enable_idle) + continue; + } + update_sample(dev, hw_sample); + send_sample(dev); + } + return IRQ_HANDLED; +} + +static int ene_probe(struct pnp_dev *pnp_dev, + const struct pnp_device_id *dev_id) +{ + struct ene_device *dev; + struct lirc_driver *lirc_driver; + int error = -ENOMEM; + + dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL); + + if (!dev) + goto err1; + + dev->pnp_dev = pnp_dev; + pnp_set_drvdata(pnp_dev, dev); + + + /* prepare lirc interface */ + error = -ENOMEM; + lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); + + if (!lirc_driver) + goto err2; + + dev->lirc_driver = lirc_driver; + + strcpy(lirc_driver->name, ENE_DRIVER_NAME); + lirc_driver->minor = -1; + lirc_driver->code_length = sizeof(int) * 8; + lirc_driver->features = LIRC_CAN_REC_MODE2; + lirc_driver->data = dev; + lirc_driver->set_use_inc = ene_hw_init; + lirc_driver->set_use_dec = ene_hw_deinit; + lirc_driver->dev = &pnp_dev->dev; + lirc_driver->owner = THIS_MODULE; + + lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL); + + if (!lirc_driver->rbuf) + goto err3; + + if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 256)) + goto err4; + + error = -ENODEV; + if (lirc_register_driver(lirc_driver)) + goto err5; + + /* validate resources */ + if (!pnp_port_valid(pnp_dev, 0) || + pnp_port_len(pnp_dev, 0) < ENE_MAX_IO) + goto err6; + + if (!pnp_irq_valid(pnp_dev, 0)) + goto err6; + + dev->hw_io = pnp_port_start(pnp_dev, 0); + dev->irq = pnp_irq(pnp_dev, 0); + + /* claim the resources */ + error = -EBUSY; + if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME)) + goto err6; + + if (request_irq(dev->irq, ene_hw_irq, + IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) + goto err7; + + /* detect hardware version and features */ + error = ene_hw_detect(dev); + if (error) + goto err8; + + ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n"); + return 0; + +err8: + free_irq(dev->irq, dev); +err7: + release_region(dev->hw_io, ENE_MAX_IO); +err6: + lirc_unregister_driver(lirc_driver->minor); +err5: + lirc_buffer_free(lirc_driver->rbuf); +err4: + kfree(lirc_driver->rbuf); +err3: + kfree(lirc_driver); +err2: + kfree(dev); +err1: + return error; +} + +static void ene_remove(struct pnp_dev *pnp_dev) +{ + struct ene_device *dev = pnp_get_drvdata(pnp_dev); + ene_hw_deinit(dev); + free_irq(dev->irq, dev); + release_region(dev->hw_io, ENE_MAX_IO); + lirc_unregister_driver(dev->lirc_driver->minor); + lirc_buffer_free(dev->lirc_driver->rbuf); + kfree(dev->lirc_driver); + kfree(dev); +} + +#ifdef CONFIG_PM + +/* TODO: make 'wake on IR' configurable and add .shutdown */ +/* currently impossible due to lack of kernel support */ + +static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state) +{ + struct ene_device *dev = pnp_get_drvdata(pnp_dev); + ene_hw_write_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, ENE_FW1_WAKE); + return 0; +} + +static int ene_resume(struct pnp_dev *pnp_dev) +{ + struct ene_device *dev = pnp_get_drvdata(pnp_dev); + if (dev->in_use) + ene_hw_init(dev); + + ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_WAKE); + return 0; +} + +#endif + +static const struct pnp_device_id ene_ids[] = { + {.id = "ENE0100",}, + {}, +}; + +static struct pnp_driver ene_driver = { + .name = ENE_DRIVER_NAME, + .id_table = ene_ids, + .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, + + .probe = ene_probe, + .remove = __devexit_p(ene_remove), + +#ifdef CONFIG_PM + .suspend = ene_suspend, + .resume = ene_resume, +#endif +}; + +static int __init ene_init(void) +{ + if (sample_period < 5) { + ene_printk(KERN_ERR, "sample period must be at\n"); + ene_printk(KERN_ERR, "least 5 us, (at least 30 recommended)\n"); + return -EINVAL; + } + return pnp_register_driver(&ene_driver); +} + +static void ene_exit(void) +{ + pnp_unregister_driver(&ene_driver); +} + +module_param(sample_period, int, S_IRUGO); +MODULE_PARM_DESC(sample_period, "Hardware sample period (75 us default)"); + +module_param(enable_idle, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(enable_idle, + "Enables turning off signal sampling after long inactivity time; " + "if disabled might help detecting input signal (default: enabled)"); + +module_param(enable_learning, bool, S_IRUGO); +MODULE_PARM_DESC(enable_learning, "Use wide band (learning) reciever"); + +MODULE_DEVICE_TABLE(pnp, ene_ids); +MODULE_DESCRIPTION + ("LIRC driver for KB3926B/KB3926C/KB3926D (aka ENE0100) CIR port"); +MODULE_AUTHOR("Maxim Levitsky"); +MODULE_LICENSE("GPL"); + +module_init(ene_init); +module_exit(ene_exit); diff --git a/drivers/staging/lirc/lirc_ene0100.h b/drivers/staging/lirc/lirc_ene0100.h new file mode 100644 index 0000000..776b693 --- /dev/null +++ b/drivers/staging/lirc/lirc_ene0100.h @@ -0,0 +1,169 @@ +/* + * driver for ENE KB3926 B/C/D CIR (also known as ENE0100) + * + * Copyright (C) 2009 Maxim Levitsky + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include +#include + +/* hardware address */ +#define ENE_STATUS 0 /* hardware status - unused */ +#define ENE_ADDR_HI 1 /* hi byte of register address */ +#define ENE_ADDR_LO 2 /* low byte of register address */ +#define ENE_IO 3 /* read/write window */ +#define ENE_MAX_IO 4 + +/* 8 bytes of samples, divided in 2 halfs*/ +#define ENE_SAMPLE_BUFFER 0xF8F0 /* regular sample buffer */ +#define ENE_SAMPLE_SPC_MASK (1 << 7) /* sample is space */ +#define ENE_SAMPLE_VALUE_MASK 0x7F +#define ENE_SAMPLE_OVERFLOW 0x7F +#define ENE_SAMPLES_SIZE 4 + +/* fan input sample buffer */ +#define ENE_SAMPLE_BUFFER_FAN 0xF8FB /* this buffer holds high byte of */ + /* each sample of normal buffer */ + +#define ENE_FAN_SMPL_PULS_MSK 0x8000 /* this bit of combined sample */ + /* if set, says that sample is pulse */ +#define ENE_FAN_VALUE_MASK 0x0FFF /* mask for valid bits of the value */ + +/* first firmware register */ +#define ENE_FW1 0xF8F8 +#define ENE_FW1_ENABLE (1 << 0) /* enable fw processing */ +#define ENE_FW1_TXIRQ (1 << 1) /* TX interrupt pending */ +#define ENE_FW1_WAKE (1 << 6) /* enable wake from S3 */ +#define ENE_FW1_IRQ (1 << 7) /* enable interrupt */ + +/* second firmware register */ +#define ENE_FW2 0xF8F9 +#define ENE_FW2_BUF_HIGH (1 << 0) /* which half of the buffer to read */ +#define ENE_FW2_IRQ_CLR (1 << 2) /* clear this on IRQ */ +#define ENE_FW2_GP40_AS_LEARN (1 << 4) /* normal input is used as */ + /* learning input */ +#define ENE_FW2_FAN_AS_NRML_IN (1 << 6) /* fan is used as normal input */ +#define ENE_FW2_LEARNING (1 << 7) /* hardware supports learning and TX */ + +/* fan as input settings - only if learning capable */ +#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */ +#define ENE_FAN_AS_IN1_EN 0xCD +#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */ +#define ENE_FAN_AS_IN2_EN 0x03 +#define ENE_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */ + +/* IRQ registers block (for revision B) */ +#define ENEB_IRQ 0xFD09 /* IRQ number */ +#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */ +#define ENEB_IRQ_STATUS 0xFD80 /* irq status */ +#define ENEB_IRQ_STATUS_IR (1 << 5) /* IR irq */ + +/* IRQ registers block (for revision C,D) */ +#define ENEC_IRQ 0xFE9B /* new irq settings register */ +#define ENEC_IRQ_MASK 0x0F /* irq number mask */ +#define ENEC_IRQ_UNK_EN (1 << 4) /* always enabled */ +#define ENEC_IRQ_STATUS (1 << 5) /* irq status and ACK */ + +/* CIR block settings */ +#define ENE_CIR_CONF1 0xFEC0 +#define ENE_CIR_CONF1_ADC_ON 0x7 /* reciever on gpio40 enabled */ +#define ENE_CIR_CONF1_LEARN1 (1 << 3) /* enabled on learning mode */ +#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */ +#define ENE_CIR_CONF1_TX_CARR (1 << 7) /* send TX carrier or not */ + +#define ENE_CIR_CONF2 0xFEC1 /* unknown setting = 0 */ +#define ENE_CIR_CONF2_LEARN2 (1 << 4) /* set on enable learning */ +#define ENE_CIR_CONF2_GPIO40DIS (1 << 5) /* disable normal input via gpio40 */ + +#define ENE_CIR_SAMPLE_PERIOD 0xFEC8 /* sample period in us */ +#define ENE_CIR_SAMPLE_OVERFLOW (1 << 7) /* interrupt on overflows if set */ + + +/* transmitter - not implemented yet */ +/* KB3926C and higher */ +/* transmission is very similiar to recieving, a byte is written to */ +/* ENE_TX_INPUT, in same manner as it is read from sample buffer */ +/* sample period is fixed*/ + + +/* transmitter ports */ +#define ENE_TX_PORT1 0xFC01 /* this enables one or both */ +#define ENE_TX_PORT1_EN (1 << 5) /* TX ports */ +#define ENE_TX_PORT2 0xFC08 +#define ENE_TX_PORT2_EN (1 << 1) + +#define ENE_TX_INPUT 0xFEC9 /* next byte to transmit */ +#define ENE_TX_SPC_MASK (1 << 7) /* Transmitted sample is space */ +#define ENE_TX_UNK1 0xFECB /* set to 0x63 */ +#define ENE_TX_SMPL_PERIOD 50 /* transmit sample period */ + + +#define ENE_TX_CARRIER 0xFECE /* TX carrier * 2 (khz) */ +#define ENE_TX_CARRIER_UNKBIT 0x80 /* This bit set on transmit */ +#define ENE_TX_CARRIER_LOW 0xFECF /* TX carrier / 2 */ + +/* Hardware versions */ +#define ENE_HW_VERSION 0xFF00 /* hardware revision */ +#define ENE_HW_UNK 0xFF1D +#define ENE_HW_UNK_CLR (1 << 2) +#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */ +#define ENE_HW_VER_MINOR 0xFF1F +#define ENE_HW_VER_OLD 0xFD00 + +#define same_sign(a, b) ((((a) > 0) && (b) > 0) || ((a) < 0 && (b) < 0)) + +#define ENE_DRIVER_NAME "enecir" +#define ENE_MAXGAP 250000 /* this is amount of time we wait + before turning the sampler, chosen + arbitry */ + +#define space(len) (-(len)) /* add a space */ + +/* software defines */ +#define ENE_IRQ_RX 1 +#define ENE_IRQ_TX 2 + +#define ENE_HW_B 1 /* 3926B */ +#define ENE_HW_C 2 /* 3926C */ +#define ENE_HW_D 3 /* 3926D */ + +#define ene_printk(level, text, ...) \ + printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__) + +struct ene_device { + struct pnp_dev *pnp_dev; + struct lirc_driver *lirc_driver; + + /* hw settings */ + unsigned long hw_io; + int irq; + + int hw_revision; /* hardware revision */ + int hw_learning_and_tx_capable; /* learning capable */ + int hw_gpio40_learning; /* gpio40 is learning */ + int hw_fan_as_normal_input; /* fan input is used as regular input */ + + /* device data */ + int idle; + int fan_input_inuse; + + int sample; + int in_use; + + struct timeval gap_start; +}; diff --git a/drivers/staging/lirc/lirc_i2c.c b/drivers/staging/lirc/lirc_i2c.c new file mode 100644 index 0000000..6df2c0e --- /dev/null +++ b/drivers/staging/lirc/lirc_i2c.c @@ -0,0 +1,536 @@ +/* + * lirc_i2c.c + * + * i2c IR driver for the onboard IR port on many TV tuner cards, including: + * -Flavors of the Hauppauge PVR-150/250/350 + * -Hauppauge HVR-1300 + * -PixelView (BT878P+W/FM) + * -KNC ONE TV Station/Anubis Typhoon TView Tuner + * -Asus TV-Box and Creative/VisionTek BreakOut-Box + * -Leadtek Winfast PVR2000 + * + * Copyright (c) 2000 Gerd Knorr + * modified for PixelView (BT878P+W/FM) by + * Michal Kochanowicz + * Christoph Bartelmus + * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by + * Ulrich Mueller + * modified for Asus TV-Box and Creative/VisionTek BreakOut-Box by + * Stefan Jahn + * modified for inclusion into kernel sources by + * Jerome Brock + * modified for Leadtek Winfast PVR2000 by + * Thomas Reitmayr (treitmayr@yahoo.com) + * modified for Hauppauge HVR-1300 by + * Jan Frey (jfrey@gmx.de) + * + * parts are cut&pasted from the old lirc_haup.c driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +struct IR { + struct lirc_driver l; + struct i2c_client c; + int nextkey; + unsigned char b[3]; + unsigned char bits; + unsigned char flag; +}; + +#define DEVICE_NAME "lirc_i2c" + +/* module parameters */ +static int debug; /* debug output */ +static int minor = -1; /* minor number */ + +#define dprintk(fmt, args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG DEVICE_NAME ": " fmt, \ + ## args); \ + } while (0) + +static int reverse(int data, int bits) +{ + int i; + int c; + + for (c = 0, i = 0; i < bits; i++) + c |= ((data & (1<c, keybuf, 1); + /* poll IR chip */ + if (i2c_master_recv(&ir->c, keybuf, sizeof(keybuf)) != sizeof(keybuf)) { + dprintk("read error\n"); + return -EIO; + } + + dprintk("key (0x%02x%02x%02x%02x)\n", + keybuf[0], keybuf[1], keybuf[2], keybuf[3]); + + /* key pressed ? */ + if (keybuf[2] == 0xff) + return -ENODATA; + + /* remove repeat bit */ + keybuf[2] &= 0x7f; + keybuf[3] |= 0x80; + + lirc_buffer_write(buf, keybuf); + return 0; +} + +static int add_to_buf_pcf8574(void *data, struct lirc_buffer *buf) +{ + struct IR *ir = data; + int rc; + unsigned char all, mask; + unsigned char key; + + /* compute all valid bits (key code + pressed/release flag) */ + all = ir->bits | ir->flag; + + /* save IR writable mask bits */ + mask = i2c_smbus_read_byte(&ir->c) & ~all; + + /* send bit mask */ + rc = i2c_smbus_write_byte(&ir->c, (0xff & all) | mask); + + /* receive scan code */ + rc = i2c_smbus_read_byte(&ir->c); + + if (rc == -1) { + dprintk("%s read error\n", ir->c.name); + return -EIO; + } + + /* drop duplicate polls */ + if (ir->b[0] == (rc & all)) + return -ENODATA; + + ir->b[0] = rc & all; + + dprintk("%s key 0x%02X %s\n", ir->c.name, rc & ir->bits, + (rc & ir->flag) ? "released" : "pressed"); + + /* ignore released buttons */ + if (rc & ir->flag) + return -ENODATA; + + /* set valid key code */ + key = rc & ir->bits; + lirc_buffer_write(buf, &key); + return 0; +} + +/* common for Hauppauge IR receivers */ +static int add_to_buf_haup_common(void *data, struct lirc_buffer *buf, + unsigned char *keybuf, int size, int offset) +{ + struct IR *ir = data; + __u16 code; + unsigned char codes[2]; + int ret; + + /* poll IR chip */ + ret = i2c_master_recv(&ir->c, keybuf, size); + if (ret == size) { + ir->b[0] = keybuf[offset]; + ir->b[1] = keybuf[offset+1]; + ir->b[2] = keybuf[offset+2]; + if (ir->b[0] != 0x00 && ir->b[1] != 0x00) + dprintk("key (0x%02x/0x%02x)\n", ir->b[0], ir->b[1]); + } else { + dprintk("read error (ret=%d)\n", ret); + /* keep last successful read buffer */ + } + + /* key pressed ? */ + if ((ir->b[0] & 0x80) == 0) + return -ENODATA; + + /* look what we have */ + code = (((__u16)ir->b[0]&0x7f)<<6) | (ir->b[1]>>2); + + codes[0] = (code >> 8) & 0xff; + codes[1] = code & 0xff; + + /* return it */ + dprintk("sending code 0x%02x%02x to lirc\n", codes[0], codes[1]); + lirc_buffer_write(buf, codes); + return 0; +} + +/* specific for the Hauppauge PVR150 IR receiver */ +static int add_to_buf_haup_pvr150(void *data, struct lirc_buffer *buf) +{ + unsigned char keybuf[6]; + /* fetch 6 bytes, first relevant is at offset 3 */ + return add_to_buf_haup_common(data, buf, keybuf, 6, 3); +} + +/* used for all Hauppauge IR receivers but the PVR150 */ +static int add_to_buf_haup(void *data, struct lirc_buffer *buf) +{ + unsigned char keybuf[3]; + /* fetch 3 bytes, first relevant is at offset 0 */ + return add_to_buf_haup_common(data, buf, keybuf, 3, 0); +} + + +static int add_to_buf_pvr2000(void *data, struct lirc_buffer *buf) +{ + struct IR *ir = data; + unsigned char key; + s32 flags; + s32 code; + + /* poll IR chip */ + flags = i2c_smbus_read_byte_data(&ir->c, 0x10); + if (-1 == flags) { + dprintk("read error\n"); + return -ENODATA; + } + /* key pressed ? */ + if (0 == (flags & 0x80)) + return -ENODATA; + + /* read actual key code */ + code = i2c_smbus_read_byte_data(&ir->c, 0x00); + if (-1 == code) { + dprintk("read error\n"); + return -ENODATA; + } + + key = code & 0xFF; + + dprintk("IR Key/Flags: (0x%02x/0x%02x)\n", key, flags & 0xFF); + + /* return it */ + lirc_buffer_write(buf, &key); + return 0; +} + +static int add_to_buf_pixelview(void *data, struct lirc_buffer *buf) +{ + struct IR *ir = data; + unsigned char key; + + /* poll IR chip */ + if (1 != i2c_master_recv(&ir->c, &key, 1)) { + dprintk("read error\n"); + return -1; + } + dprintk("key %02x\n", key); + + /* return it */ + lirc_buffer_write(buf, &key); + return 0; +} + +static int add_to_buf_pv951(void *data, struct lirc_buffer *buf) +{ + struct IR *ir = data; + unsigned char key; + unsigned char codes[4]; + + /* poll IR chip */ + if (1 != i2c_master_recv(&ir->c, &key, 1)) { + dprintk("read error\n"); + return -ENODATA; + } + /* ignore 0xaa */ + if (key == 0xaa) + return -ENODATA; + dprintk("key %02x\n", key); + + codes[0] = 0x61; + codes[1] = 0xD6; + codes[2] = reverse(key, 8); + codes[3] = (~codes[2])&0xff; + + lirc_buffer_write(buf, codes); + return 0; +} + +static int add_to_buf_knc1(void *data, struct lirc_buffer *buf) +{ + static unsigned char last_key = 0xFF; + struct IR *ir = data; + unsigned char key; + + /* poll IR chip */ + if (1 != i2c_master_recv(&ir->c, &key, 1)) { + dprintk("read error\n"); + return -ENODATA; + } + + /* + * it seems that 0xFE indicates that a button is still held + * down, while 0xFF indicates that no button is held + * down. 0xFE sequences are sometimes interrupted by 0xFF + */ + + dprintk("key %02x\n", key); + + if (key == 0xFF) + return -ENODATA; + + if (key == 0xFE) + key = last_key; + + last_key = key; + lirc_buffer_write(buf, &key); + + return 0; +} + +static int set_use_inc(void *data) +{ + struct IR *ir = data; + + dprintk("%s called\n", __func__); + + /* lock bttv in memory while /dev/lirc is in use */ + i2c_use_client(&ir->c); + + return 0; +} + +static void set_use_dec(void *data) +{ + struct IR *ir = data; + + dprintk("%s called\n", __func__); + + i2c_release_client(&ir->c); +} + +static struct lirc_driver lirc_template = { + .name = "lirc_i2c", + .set_use_inc = set_use_inc, + .set_use_dec = set_use_dec, + .dev = NULL, + .owner = THIS_MODULE, +}; + +static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id); +static int ir_remove(struct i2c_client *client); +static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg); + +static const struct i2c_device_id ir_receiver_id[] = { + /* Generic entry for any IR receiver */ + { "ir_video", 0 }, + /* IR device specific entries could be added here */ + { } +}; + +static struct i2c_driver driver = { + .driver = { + .owner = THIS_MODULE, + .name = "i2c ir driver", + }, + .probe = ir_probe, + .remove = ir_remove, + .id_table = ir_receiver_id, + .command = ir_command, +}; + +static void pcf_probe(struct i2c_client *client, struct IR *ir) +{ + int ret1, ret2, ret3, ret4; + + ret1 = i2c_smbus_write_byte(client, 0xff); + ret2 = i2c_smbus_read_byte(client); + ret3 = i2c_smbus_write_byte(client, 0x00); + ret4 = i2c_smbus_read_byte(client); + + /* in the Asus TV-Box: bit 1-0 */ + if (((ret2 & 0x03) == 0x03) && ((ret4 & 0x03) == 0x00)) { + ir->bits = (unsigned char) ~0x07; + ir->flag = 0x04; + /* in the Creative/VisionTek BreakOut-Box: bit 7-6 */ + } else if (((ret2 & 0xc0) == 0xc0) && ((ret4 & 0xc0) == 0x00)) { + ir->bits = (unsigned char) ~0xe0; + ir->flag = 0x20; + } + + return; +} + +static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct IR *ir; + struct i2c_adapter *adap = client->adapter; + unsigned short addr = client->addr; + int retval; + + ir = kzalloc(sizeof(struct IR), GFP_KERNEL); + if (!ir) + return -ENOMEM; + memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver)); + memcpy(&ir->c, client, sizeof(struct i2c_client)); + + i2c_set_clientdata(client, ir); + ir->l.data = ir; + ir->l.minor = minor; + ir->l.sample_rate = 10; + ir->l.dev = &ir->c.dev; + ir->nextkey = -1; + + switch (addr) { + case 0x64: + strlcpy(ir->c.name, "Pixelview IR", I2C_NAME_SIZE); + ir->l.code_length = 8; + ir->l.add_to_buf = add_to_buf_pixelview; + break; + case 0x4b: + strlcpy(ir->c.name, "PV951 IR", I2C_NAME_SIZE); + ir->l.code_length = 32; + ir->l.add_to_buf = add_to_buf_pv951; + break; + case 0x71: + if (adap->id == I2C_HW_B_CX2388x) + strlcpy(ir->c.name, "Hauppauge HVR1300", I2C_NAME_SIZE); + else /* bt8xx or cx2341x */ + /* + * The PVR150 IR receiver uses the same protocol as + * other Hauppauge cards, but the data flow is + * different, so we need to deal with it by its own. + */ + strlcpy(ir->c.name, "Hauppauge PVR150", I2C_NAME_SIZE); + ir->l.code_length = 13; + ir->l.add_to_buf = add_to_buf_haup_pvr150; + break; + case 0x6b: + strlcpy(ir->c.name, "Adaptec IR", I2C_NAME_SIZE); + ir->l.code_length = 32; + ir->l.add_to_buf = add_to_buf_adap; + break; + case 0x18: + case 0x1a: + if (adap->id == I2C_HW_B_CX2388x) { + strlcpy(ir->c.name, "Leadtek IR", I2C_NAME_SIZE); + ir->l.code_length = 8; + ir->l.add_to_buf = add_to_buf_pvr2000; + } else { /* bt8xx or cx2341x */ + strlcpy(ir->c.name, "Hauppauge IR", I2C_NAME_SIZE); + ir->l.code_length = 13; + ir->l.add_to_buf = add_to_buf_haup; + } + break; + case 0x30: + strlcpy(ir->c.name, "KNC ONE IR", I2C_NAME_SIZE); + ir->l.code_length = 8; + ir->l.add_to_buf = add_to_buf_knc1; + break; + case 0x21: + case 0x23: + pcf_probe(client, ir); + strlcpy(ir->c.name, "TV-Box IR", I2C_NAME_SIZE); + ir->l.code_length = 8; + ir->l.add_to_buf = add_to_buf_pcf8574; + break; + default: + /* shouldn't happen */ + printk("lirc_i2c: Huh? unknown i2c address (0x%02x)?\n", addr); + kfree(ir); + return -EINVAL; + } + printk(KERN_INFO "lirc_i2c: chip 0x%x found @ 0x%02x (%s)\n", + adap->id, addr, ir->c.name); + + retval = lirc_register_driver(&ir->l); + + if (retval < 0) { + printk(KERN_ERR "lirc_i2c: failed to register driver!\n"); + kfree(ir); + return retval; + } + + ir->l.minor = retval; + + return 0; +} + +static int ir_remove(struct i2c_client *client) +{ + struct IR *ir = i2c_get_clientdata(client); + + /* unregister device */ + lirc_unregister_driver(ir->l.minor); + + /* free memory */ + kfree(ir); + return 0; +} + +static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg) +{ + /* nothing */ + return 0; +} + +static int __init lirc_i2c_init(void) +{ + i2c_add_driver(&driver); + return 0; +} + +static void __exit lirc_i2c_exit(void) +{ + i2c_del_driver(&driver); +} + +MODULE_DESCRIPTION("Infrared receiver driver for Hauppauge and " + "Pixelview cards (i2c stack)"); +MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, " + "Ulrich Mueller, Stefan Jahn, Jerome Brock"); +MODULE_LICENSE("GPL"); + +module_param(minor, int, S_IRUGO); +MODULE_PARM_DESC(minor, "Preferred minor device number"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging messages"); + +module_init(lirc_i2c_init); +module_exit(lirc_i2c_exit); diff --git a/drivers/staging/lirc/lirc_igorplugusb.c b/drivers/staging/lirc/lirc_igorplugusb.c new file mode 100644 index 0000000..bce600e --- /dev/null +++ b/drivers/staging/lirc/lirc_igorplugusb.c @@ -0,0 +1,555 @@ +/* + * lirc_igorplugusb - USB remote support for LIRC + * + * Supports the standard homebrew IgorPlugUSB receiver with Igor's firmware. + * See http://www.cesko.host.sk/IgorPlugUSB/IgorPlug-USB%20(AVR)_eng.htm + * + * The device can only record bursts of up to 36 pulses/spaces. + * Works fine with RC5. Longer commands lead to device buffer overrun. + * (Maybe a better firmware or a microcontroller with more ram can help?) + * + * Version 0.1 [beta status] + * + * Copyright (C) 2004 Jan M. Hochstein + * + * + * This driver was derived from: + * Paul Miller + * "lirc_atiusb" module + * Vladimir Dergachev 's 2002 + * "USB ATI Remote support" (input device) + * Adrian Dewhurst 's 2002 + * "USB StreamZap remote driver" (LIRC) + * Artur Lipowski 's 2002 + * "lirc_dev" and "lirc_gpio" LIRC modules + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + + +/* module identification */ +#define DRIVER_VERSION "0.1" +#define DRIVER_AUTHOR \ + "Jan M. Hochstein " +#define DRIVER_DESC "USB remote driver for LIRC" +#define DRIVER_NAME "lirc_igorplugusb" + +/* debugging support */ +#ifdef CONFIG_USB_DEBUG +static int debug = 1; +#else +static int debug; +#endif + +#define dprintk(fmt, args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG fmt, ## args); \ + } while (0) + +/* One mode2 pulse/space has 4 bytes. */ +#define CODE_LENGTH sizeof(int) + +/* Igor's firmware cannot record bursts longer than 36. */ +#define DEVICE_BUFLEN 36 + +/* + * Header at the beginning of the device's buffer: + * unsigned char data_length + * unsigned char data_start (!=0 means ring-buffer overrun) + * unsigned char counter (incremented by each burst) + */ +#define DEVICE_HEADERLEN 3 + +/* This is for the gap */ +#define ADDITIONAL_LIRC_BYTES 2 + +/* times to poll per second */ +#define SAMPLE_RATE 100 +static int sample_rate = SAMPLE_RATE; + + +/**** Igor's USB Request Codes */ + +#define SET_INFRABUFFER_EMPTY 1 +/** + * Params: none + * Answer: empty + */ + +#define GET_INFRACODE 2 +/** + * Params: + * wValue: offset to begin reading infra buffer + * + * Answer: infra data + */ + +#define SET_DATAPORT_DIRECTION 3 +/** + * Params: + * wValue: (byte) 1 bit for each data port pin (0=in, 1=out) + * + * Answer: empty + */ + +#define GET_DATAPORT_DIRECTION 4 +/** + * Params: none + * + * Answer: (byte) 1 bit for each data port pin (0=in, 1=out) + */ + +#define SET_OUT_DATAPORT 5 +/** + * Params: + * wValue: byte to write to output data port + * + * Answer: empty + */ + +#define GET_OUT_DATAPORT 6 +/** + * Params: none + * + * Answer: least significant 3 bits read from output data port + */ + +#define GET_IN_DATAPORT 7 +/** + * Params: none + * + * Answer: least significant 3 bits read from input data port + */ + +#define READ_EEPROM 8 +/** + * Params: + * wValue: offset to begin reading EEPROM + * + * Answer: EEPROM bytes + */ + +#define WRITE_EEPROM 9 +/** + * Params: + * wValue: offset to EEPROM byte + * wIndex: byte to write + * + * Answer: empty + */ + +#define SEND_RS232 10 +/** + * Params: + * wValue: byte to send + * + * Answer: empty + */ + +#define RECV_RS232 11 +/** + * Params: none + * + * Answer: byte received + */ + +#define SET_RS232_BAUD 12 +/** + * Params: + * wValue: byte to write to UART bit rate register (UBRR) + * + * Answer: empty + */ + +#define GET_RS232_BAUD 13 +/** + * Params: none + * + * Answer: byte read from UART bit rate register (UBRR) + */ + + +/* data structure for each usb remote */ +struct igorplug { + + /* usb */ + struct usb_device *usbdev; + struct urb *urb_in; + int devnum; + + unsigned char *buf_in; + unsigned int len_in; + int in_space; + struct timeval last_time; + + dma_addr_t dma_in; + + /* lirc */ + struct lirc_driver *d; + + /* handle sending (init strings) */ + int send_flags; + wait_queue_head_t wait_out; +}; + +static int unregister_from_lirc(struct igorplug *ir) +{ + struct lirc_driver *d = ir->d; + int devnum; + + if (!ir->d) + return -EINVAL; + + devnum = ir->devnum; + dprintk(DRIVER_NAME "[%d]: unregister from lirc called\n", devnum); + + lirc_unregister_driver(d->minor); + + printk(DRIVER_NAME "[%d]: usb remote disconnected\n", devnum); + + kfree(d); + ir->d = NULL; + kfree(ir); + return 0; +} + +static int set_use_inc(void *data) +{ + struct igorplug *ir = data; + + if (!ir) { + printk(DRIVER_NAME "[?]: set_use_inc called with no context\n"); + return -EIO; + } + dprintk(DRIVER_NAME "[%d]: set use inc\n", ir->devnum); + + if (!ir->usbdev) + return -ENODEV; + + return 0; +} + +static void set_use_dec(void *data) +{ + struct igorplug *ir = data; + + if (!ir) { + printk(DRIVER_NAME "[?]: set_use_dec called with no context\n"); + return; + } + dprintk(DRIVER_NAME "[%d]: set use dec\n", ir->devnum); +} + + +/** + * Called in user context. + * return 0 if data was added to the buffer and + * -ENODATA if none was available. This should add some number of bits + * evenly divisible by code_length to the buffer + */ +static int usb_remote_poll(void *data, struct lirc_buffer *buf) +{ + int ret; + struct igorplug *ir = (struct igorplug *)data; + + if (!ir->usbdev) /* Has the device been removed? */ + return -ENODEV; + + memset(ir->buf_in, 0, ir->len_in); + + ret = usb_control_msg( + ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), + GET_INFRACODE, USB_TYPE_VENDOR|USB_DIR_IN, + 0/* offset */, /*unused*/0, + ir->buf_in, ir->len_in, + /*timeout*/HZ * USB_CTRL_GET_TIMEOUT); + if (ret > 0) { + int i = DEVICE_HEADERLEN; + int code, timediff; + struct timeval now; + + if (ret <= 1) /* ACK packet has 1 byte --> ignore */ + return -ENODATA; + + dprintk(DRIVER_NAME ": Got %d bytes. Header: %02x %02x %02x\n", + ret, ir->buf_in[0], ir->buf_in[1], ir->buf_in[2]); + + if (ir->buf_in[2] != 0) { + printk(DRIVER_NAME "[%d]: Device buffer overrun.\n", + ir->devnum); + /* start at earliest byte */ + i = DEVICE_HEADERLEN + ir->buf_in[2]; + /* where are we now? space, gap or pulse? */ + } + + do_gettimeofday(&now); + timediff = now.tv_sec - ir->last_time.tv_sec; + if (timediff + 1 > PULSE_MASK / 1000000) + timediff = PULSE_MASK; + else { + timediff *= 1000000; + timediff += now.tv_usec - ir->last_time.tv_usec; + } + ir->last_time.tv_sec = now.tv_sec; + ir->last_time.tv_usec = now.tv_usec; + + /* create leading gap */ + code = timediff; + lirc_buffer_write(buf, (unsigned char *)&code); + ir->in_space = 1; /* next comes a pulse */ + + /* MODE2: pulse/space (PULSE_BIT) in 1us units */ + + while (i < ret) { + /* 1 Igor-tick = 85.333333 us */ + code = (unsigned int)ir->buf_in[i] * 85 + + (unsigned int)ir->buf_in[i] / 3; + if (ir->in_space) + code |= PULSE_BIT; + lirc_buffer_write(buf, (unsigned char *)&code); + /* 1 chunk = CODE_LENGTH bytes */ + ir->in_space ^= 1; + ++i; + } + + ret = usb_control_msg( + ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), + SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN, + /*unused*/0, /*unused*/0, + /*dummy*/ir->buf_in, /*dummy*/ir->len_in, + /*timeout*/HZ * USB_CTRL_GET_TIMEOUT); + if (ret < 0) + printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: " + "error %d\n", ir->devnum, ret); + return 0; + } else if (ret < 0) + printk(DRIVER_NAME "[%d]: GET_INFRACODE: error %d\n", + ir->devnum, ret); + + return -ENODATA; +} + + + +static int usb_remote_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = NULL; + struct usb_host_interface *idesc = NULL; + struct usb_host_endpoint *ep_ctl2; + struct igorplug *ir = NULL; + struct lirc_driver *driver = NULL; + int devnum, pipe, maxp; + int minor = 0; + char buf[63], name[128] = ""; + int mem_failure = 0; + int ret; + + dprintk(DRIVER_NAME ": usb probe called.\n"); + + dev = interface_to_usbdev(intf); + + idesc = intf->cur_altsetting; + + if (idesc->desc.bNumEndpoints != 1) + return -ENODEV; + ep_ctl2 = idesc->endpoint; + if (((ep_ctl2->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) + != USB_DIR_IN) + || (ep_ctl2->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + != USB_ENDPOINT_XFER_CONTROL) + return -ENODEV; + pipe = usb_rcvctrlpipe(dev, ep_ctl2->desc.bEndpointAddress); + devnum = dev->devnum; + maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); + + dprintk(DRIVER_NAME "[%d]: bytes_in_key=%lu maxp=%d\n", + devnum, CODE_LENGTH, maxp); + + + mem_failure = 0; + ir = kzalloc(sizeof(struct igorplug), GFP_KERNEL); + if (!ir) { + mem_failure = 1; + goto mem_failure_switch; + } + driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); + if (!driver) { + mem_failure = 2; + goto mem_failure_switch; + } + + ir->buf_in = usb_alloc_coherent(dev, + DEVICE_BUFLEN+DEVICE_HEADERLEN, + GFP_ATOMIC, &ir->dma_in); + if (!ir->buf_in) { + mem_failure = 3; + goto mem_failure_switch; + } + + strcpy(driver->name, DRIVER_NAME " "); + driver->minor = -1; + driver->code_length = CODE_LENGTH * 8; /* in bits */ + driver->features = LIRC_CAN_REC_MODE2; + driver->data = ir; + driver->chunk_size = CODE_LENGTH; + driver->buffer_size = DEVICE_BUFLEN + ADDITIONAL_LIRC_BYTES; + driver->set_use_inc = &set_use_inc; + driver->set_use_dec = &set_use_dec; + driver->sample_rate = sample_rate; /* per second */ + driver->add_to_buf = &usb_remote_poll; + driver->dev = &intf->dev; + driver->owner = THIS_MODULE; + + init_waitqueue_head(&ir->wait_out); + + minor = lirc_register_driver(driver); + if (minor < 0) + mem_failure = 9; + +mem_failure_switch: + + switch (mem_failure) { + case 9: + usb_free_coherent(dev, DEVICE_BUFLEN+DEVICE_HEADERLEN, + ir->buf_in, ir->dma_in); + case 3: + kfree(driver); + case 2: + kfree(ir); + case 1: + printk(DRIVER_NAME "[%d]: out of memory (code=%d)\n", + devnum, mem_failure); + return -ENOMEM; + } + + driver->minor = minor; + ir->d = driver; + ir->devnum = devnum; + ir->usbdev = dev; + ir->len_in = DEVICE_BUFLEN+DEVICE_HEADERLEN; + ir->in_space = 1; /* First mode2 event is a space. */ + do_gettimeofday(&ir->last_time); + + if (dev->descriptor.iManufacturer + && usb_string(dev, dev->descriptor.iManufacturer, + buf, sizeof(buf)) > 0) + strlcpy(name, buf, sizeof(name)); + if (dev->descriptor.iProduct + && usb_string(dev, dev->descriptor.iProduct, buf, sizeof(buf)) > 0) + snprintf(name + strlen(name), sizeof(name) - strlen(name), + " %s", buf); + printk(DRIVER_NAME "[%d]: %s on usb%d:%d\n", devnum, name, + dev->bus->busnum, devnum); + + /* clear device buffer */ + ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), + SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN, + /*unused*/0, /*unused*/0, + /*dummy*/ir->buf_in, /*dummy*/ir->len_in, + /*timeout*/HZ * USB_CTRL_GET_TIMEOUT); + if (ret < 0) + printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: error %d\n", + devnum, ret); + + usb_set_intfdata(intf, ir); + return 0; +} + + +static void usb_remote_disconnect(struct usb_interface *intf) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct igorplug *ir = usb_get_intfdata(intf); + usb_set_intfdata(intf, NULL); + + if (!ir || !ir->d) + return; + + ir->usbdev = NULL; + wake_up_all(&ir->wait_out); + + usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in); + + unregister_from_lirc(ir); +} + +static struct usb_device_id usb_remote_id_table[] = { + /* Igor Plug USB (Atmel's Manufact. ID) */ + { USB_DEVICE(0x03eb, 0x0002) }, + + /* Terminating entry */ + { } +}; + +static struct usb_driver usb_remote_driver = { + .name = DRIVER_NAME, + .probe = usb_remote_probe, + .disconnect = usb_remote_disconnect, + .id_table = usb_remote_id_table +}; + +static int __init usb_remote_init(void) +{ + int i; + + printk(KERN_INFO "\n" + DRIVER_NAME ": " DRIVER_DESC " v" DRIVER_VERSION "\n"); + printk(DRIVER_NAME ": " DRIVER_AUTHOR "\n"); + dprintk(DRIVER_NAME ": debug mode enabled\n"); + + i = usb_register(&usb_remote_driver); + if (i < 0) { + printk(DRIVER_NAME ": usb register failed, result = %d\n", i); + return -ENODEV; + } + + return 0; +} + +static void __exit usb_remote_exit(void) +{ + usb_deregister(&usb_remote_driver); +} + +module_init(usb_remote_init); +module_exit(usb_remote_exit); + +#include +MODULE_INFO(vermagic, VERMAGIC_STRING); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(usb, usb_remote_id_table); + +module_param(sample_rate, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(sample_rate, "Sampling rate in Hz (default: 100)"); + diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c new file mode 100644 index 0000000..6649325 --- /dev/null +++ b/drivers/staging/lirc/lirc_imon.c @@ -0,0 +1,1058 @@ +/* + * lirc_imon.c: LIRC/VFD/LCD driver for SoundGraph iMON IR/VFD/LCD + * including the iMON PAD model + * + * Copyright(C) 2004 Venky Raju(dev@venky.ws) + * Copyright(C) 2009 Jarod Wilson + * + * lirc_imon is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + + +#define MOD_AUTHOR "Venky Raju " +#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display" +#define MOD_NAME "lirc_imon" +#define MOD_VERSION "0.8" + +#define DISPLAY_MINOR_BASE 144 +#define DEVICE_NAME "lcd%d" + +#define BUF_CHUNK_SIZE 4 +#define BUF_SIZE 128 + +#define BIT_DURATION 250 /* each bit received is 250us */ + +/*** P R O T O T Y P E S ***/ + +/* USB Callback prototypes */ +static int imon_probe(struct usb_interface *interface, + const struct usb_device_id *id); +static void imon_disconnect(struct usb_interface *interface); +static void usb_rx_callback(struct urb *urb); +static void usb_tx_callback(struct urb *urb); + +/* suspend/resume support */ +static int imon_resume(struct usb_interface *intf); +static int imon_suspend(struct usb_interface *intf, pm_message_t message); + +/* Display file_operations function prototypes */ +static int display_open(struct inode *inode, struct file *file); +static int display_close(struct inode *inode, struct file *file); + +/* VFD write operation */ +static ssize_t vfd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos); + +/* LIRC driver function prototypes */ +static int ir_open(void *data); +static void ir_close(void *data); + +/* Driver init/exit prototypes */ +static int __init imon_init(void); +static void __exit imon_exit(void); + +/*** G L O B A L S ***/ +#define IMON_DATA_BUF_SZ 35 + +struct imon_context { + struct usb_device *usbdev; + /* Newer devices have two interfaces */ + int display; /* not all controllers do */ + int display_isopen; /* display port has been opened */ + int ir_isopen; /* IR port open */ + int dev_present; /* USB device presence */ + struct mutex ctx_lock; /* to lock this object */ + wait_queue_head_t remove_ok; /* For unexpected USB disconnects */ + + int vfd_proto_6p; /* some VFD require a 6th packet */ + + struct lirc_driver *driver; + struct usb_endpoint_descriptor *rx_endpoint; + struct usb_endpoint_descriptor *tx_endpoint; + struct urb *rx_urb; + struct urb *tx_urb; + unsigned char usb_rx_buf[8]; + unsigned char usb_tx_buf[8]; + + struct rx_data { + int count; /* length of 0 or 1 sequence */ + int prev_bit; /* logic level of sequence */ + int initial_space; /* initial space flag */ + } rx; + + struct tx_t { + unsigned char data_buf[IMON_DATA_BUF_SZ]; /* user data buffer */ + struct completion finished; /* wait for write to finish */ + atomic_t busy; /* write in progress */ + int status; /* status of tx completion */ + } tx; +}; + +static const struct file_operations display_fops = { + .owner = THIS_MODULE, + .open = &display_open, + .write = &vfd_write, + .release = &display_close +}; + +/* + * USB Device ID for iMON USB Control Boards + * + * The Windows drivers contain 6 different inf files, more or less one for + * each new device until the 0x0034-0x0046 devices, which all use the same + * driver. Some of the devices in the 34-46 range haven't been definitively + * identified yet. Early devices have either a TriGem Computer, Inc. or a + * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later + * devices use the SoundGraph vendor ID (0x15c2). + */ +static struct usb_device_id imon_usb_id_table[] = { + /* TriGem iMON (IR only) -- TG_iMON.inf */ + { USB_DEVICE(0x0aa8, 0x8001) }, + + /* SoundGraph iMON (IR only) -- sg_imon.inf */ + { USB_DEVICE(0x04e8, 0xff30) }, + + /* SoundGraph iMON VFD (IR & VFD) -- iMON_VFD.inf */ + { USB_DEVICE(0x0aa8, 0xffda) }, + + /* SoundGraph iMON SS (IR & VFD) -- iMON_SS.inf */ + { USB_DEVICE(0x15c2, 0xffda) }, + + {} +}; + +/* Some iMON VFD models requires a 6th packet for VFD writes */ +static struct usb_device_id vfd_proto_6p_list[] = { + { USB_DEVICE(0x15c2, 0xffda) }, + {} +}; + +/* Some iMON devices have no lcd/vfd, don't set one up */ +static struct usb_device_id ir_only_list[] = { + { USB_DEVICE(0x0aa8, 0x8001) }, + { USB_DEVICE(0x04e8, 0xff30) }, + {} +}; + +/* USB Device data */ +static struct usb_driver imon_driver = { + .name = MOD_NAME, + .probe = imon_probe, + .disconnect = imon_disconnect, + .suspend = imon_suspend, + .resume = imon_resume, + .id_table = imon_usb_id_table, +}; + +static struct usb_class_driver imon_class = { + .name = DEVICE_NAME, + .fops = &display_fops, + .minor_base = DISPLAY_MINOR_BASE, +}; + +/* to prevent races between open() and disconnect(), probing, etc */ +static DEFINE_MUTEX(driver_lock); + +static int debug; + +/*** M O D U L E C O D E ***/ + +MODULE_AUTHOR(MOD_AUTHOR); +MODULE_DESCRIPTION(MOD_DESC); +MODULE_VERSION(MOD_VERSION); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(usb, imon_usb_id_table); +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes(default: no)"); + +static void free_imon_context(struct imon_context *context) +{ + struct device *dev = context->driver->dev; + usb_free_urb(context->tx_urb); + usb_free_urb(context->rx_urb); + lirc_buffer_free(context->driver->rbuf); + kfree(context->driver->rbuf); + kfree(context->driver); + kfree(context); + + dev_dbg(dev, "%s: iMON context freed\n", __func__); +} + +static void deregister_from_lirc(struct imon_context *context) +{ + int retval; + int minor = context->driver->minor; + + retval = lirc_unregister_driver(minor); + if (retval) + err("%s: unable to deregister from lirc(%d)", + __func__, retval); + else + printk(KERN_INFO MOD_NAME ": Deregistered iMON driver " + "(minor:%d)\n", minor); + +} + +/** + * Called when the Display device (e.g. /dev/lcd0) + * is opened by the application. + */ +static int display_open(struct inode *inode, struct file *file) +{ + struct usb_interface *interface; + struct imon_context *context = NULL; + int subminor; + int retval = 0; + + /* prevent races with disconnect */ + mutex_lock(&driver_lock); + + subminor = iminor(inode); + interface = usb_find_interface(&imon_driver, subminor); + if (!interface) { + err("%s: could not find interface for minor %d", + __func__, subminor); + retval = -ENODEV; + goto exit; + } + context = usb_get_intfdata(interface); + + if (!context) { + err("%s: no context found for minor %d", + __func__, subminor); + retval = -ENODEV; + goto exit; + } + + mutex_lock(&context->ctx_lock); + + if (!context->display) { + err("%s: display not supported by device", __func__); + retval = -ENODEV; + } else if (context->display_isopen) { + err("%s: display port is already open", __func__); + retval = -EBUSY; + } else { + context->display_isopen = 1; + file->private_data = context; + dev_info(context->driver->dev, "display port opened\n"); + } + + mutex_unlock(&context->ctx_lock); + +exit: + mutex_unlock(&driver_lock); + return retval; +} + +/** + * Called when the display device (e.g. /dev/lcd0) + * is closed by the application. + */ +static int display_close(struct inode *inode, struct file *file) +{ + struct imon_context *context = NULL; + int retval = 0; + + context = (struct imon_context *)file->private_data; + + if (!context) { + err("%s: no context for device", __func__); + return -ENODEV; + } + + mutex_lock(&context->ctx_lock); + + if (!context->display) { + err("%s: display not supported by device", __func__); + retval = -ENODEV; + } else if (!context->display_isopen) { + err("%s: display is not open", __func__); + retval = -EIO; + } else { + context->display_isopen = 0; + dev_info(context->driver->dev, "display port closed\n"); + if (!context->dev_present && !context->ir_isopen) { + /* + * Device disconnected before close and IR port is not + * open. If IR port is open, context will be deleted by + * ir_close. + */ + mutex_unlock(&context->ctx_lock); + free_imon_context(context); + return retval; + } + } + + mutex_unlock(&context->ctx_lock); + return retval; +} + +/** + * Sends a packet to the device -- this function must be called + * with context->ctx_lock held. + */ +static int send_packet(struct imon_context *context) +{ + unsigned int pipe; + int interval = 0; + int retval = 0; + struct usb_ctrlrequest *control_req = NULL; + + /* Check if we need to use control or interrupt urb */ + pipe = usb_sndintpipe(context->usbdev, + context->tx_endpoint->bEndpointAddress); + interval = context->tx_endpoint->bInterval; + + usb_fill_int_urb(context->tx_urb, context->usbdev, pipe, + context->usb_tx_buf, + sizeof(context->usb_tx_buf), + usb_tx_callback, context, interval); + + context->tx_urb->actual_length = 0; + + init_completion(&context->tx.finished); + atomic_set(&(context->tx.busy), 1); + + retval = usb_submit_urb(context->tx_urb, GFP_KERNEL); + if (retval) { + atomic_set(&(context->tx.busy), 0); + err("%s: error submitting urb(%d)", __func__, retval); + } else { + /* Wait for transmission to complete (or abort) */ + mutex_unlock(&context->ctx_lock); + retval = wait_for_completion_interruptible( + &context->tx.finished); + if (retval) + err("%s: task interrupted", __func__); + mutex_lock(&context->ctx_lock); + + retval = context->tx.status; + if (retval) + err("%s: packet tx failed (%d)", __func__, retval); + } + + kfree(control_req); + + return retval; +} + +/** + * Writes data to the VFD. The iMON VFD is 2x16 characters + * and requires data in 5 consecutive USB interrupt packets, + * each packet but the last carrying 7 bytes. + * + * I don't know if the VFD board supports features such as + * scrolling, clearing rows, blanking, etc. so at + * the caller must provide a full screen of data. If fewer + * than 32 bytes are provided spaces will be appended to + * generate a full screen. + */ +static ssize_t vfd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos) +{ + int i; + int offset; + int seq; + int retval = 0; + struct imon_context *context; + const unsigned char vfd_packet6[] = { + 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF }; + int *data_buf; + + context = (struct imon_context *)file->private_data; + if (!context) { + err("%s: no context for device", __func__); + return -ENODEV; + } + + mutex_lock(&context->ctx_lock); + + if (!context->dev_present) { + err("%s: no iMON device present", __func__); + retval = -ENODEV; + goto exit; + } + + if (n_bytes <= 0 || n_bytes > IMON_DATA_BUF_SZ - 3) { + err("%s: invalid payload size", __func__); + retval = -EINVAL; + goto exit; + } + + data_buf = memdup_user(buf, n_bytes); + if (IS_ERR(data_buf)) { + retval = PTR_ERR(data_buf); + goto exit; + } + + memcpy(context->tx.data_buf, data_buf, n_bytes); + + /* Pad with spaces */ + for (i = n_bytes; i < IMON_DATA_BUF_SZ - 3; ++i) + context->tx.data_buf[i] = ' '; + + for (i = IMON_DATA_BUF_SZ - 3; i < IMON_DATA_BUF_SZ; ++i) + context->tx.data_buf[i] = 0xFF; + + offset = 0; + seq = 0; + + do { + memcpy(context->usb_tx_buf, context->tx.data_buf + offset, 7); + context->usb_tx_buf[7] = (unsigned char) seq; + + retval = send_packet(context); + if (retval) { + err("%s: send packet failed for packet #%d", + __func__, seq/2); + goto exit; + } else { + seq += 2; + offset += 7; + } + + } while (offset < IMON_DATA_BUF_SZ); + + if (context->vfd_proto_6p) { + /* Send packet #6 */ + memcpy(context->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6)); + context->usb_tx_buf[7] = (unsigned char) seq; + retval = send_packet(context); + if (retval) + err("%s: send packet failed for packet #%d", + __func__, seq/2); + } + +exit: + mutex_unlock(&context->ctx_lock); + + return (!retval) ? n_bytes : retval; +} + +/** + * Callback function for USB core API: transmit data + */ +static void usb_tx_callback(struct urb *urb) +{ + struct imon_context *context; + + if (!urb) + return; + context = (struct imon_context *)urb->context; + if (!context) + return; + + context->tx.status = urb->status; + + /* notify waiters that write has finished */ + atomic_set(&context->tx.busy, 0); + complete(&context->tx.finished); + + return; +} + +/** + * Called by lirc_dev when the application opens /dev/lirc + */ +static int ir_open(void *data) +{ + int retval = 0; + struct imon_context *context; + + /* prevent races with disconnect */ + mutex_lock(&driver_lock); + + context = (struct imon_context *)data; + + /* initial IR protocol decode variables */ + context->rx.count = 0; + context->rx.initial_space = 1; + context->rx.prev_bit = 0; + + context->ir_isopen = 1; + dev_info(context->driver->dev, "IR port opened\n"); + + mutex_unlock(&driver_lock); + return retval; +} + +/** + * Called by lirc_dev when the application closes /dev/lirc + */ +static void ir_close(void *data) +{ + struct imon_context *context; + + context = (struct imon_context *)data; + if (!context) { + err("%s: no context for device", __func__); + return; + } + + mutex_lock(&context->ctx_lock); + + context->ir_isopen = 0; + dev_info(context->driver->dev, "IR port closed\n"); + + if (!context->dev_present) { + /* + * Device disconnected while IR port was still open. Driver + * was not deregistered at disconnect time, so do it now. + */ + deregister_from_lirc(context); + + if (!context->display_isopen) { + mutex_unlock(&context->ctx_lock); + free_imon_context(context); + return; + } + /* + * If display port is open, context will be deleted by + * display_close + */ + } + + mutex_unlock(&context->ctx_lock); + return; +} + +/** + * Convert bit count to time duration (in us) and submit + * the value to lirc_dev. + */ +static void submit_data(struct imon_context *context) +{ + unsigned char buf[4]; + int value = context->rx.count; + int i; + + dev_dbg(context->driver->dev, "submitting data to LIRC\n"); + + value *= BIT_DURATION; + value &= PULSE_MASK; + if (context->rx.prev_bit) + value |= PULSE_BIT; + + for (i = 0; i < 4; ++i) + buf[i] = value>>(i*8); + + lirc_buffer_write(context->driver->rbuf, buf); + wake_up(&context->driver->rbuf->wait_poll); + return; +} + +static inline int tv2int(const struct timeval *a, const struct timeval *b) +{ + int usecs = 0; + int sec = 0; + + if (b->tv_usec > a->tv_usec) { + usecs = 1000000; + sec--; + } + + usecs += a->tv_usec - b->tv_usec; + + sec += a->tv_sec - b->tv_sec; + sec *= 1000; + usecs /= 1000; + sec += usecs; + + if (sec < 0) + sec = 1000; + + return sec; +} + +/** + * Process the incoming packet + */ +static void imon_incoming_packet(struct imon_context *context, + struct urb *urb, int intf) +{ + int len = urb->actual_length; + unsigned char *buf = urb->transfer_buffer; + struct device *dev = context->driver->dev; + int octet, bit; + unsigned char mask; + int i, chunk_num; + + /* + * just bail out if no listening IR client + */ + if (!context->ir_isopen) + return; + + if (len != 8) { + dev_warn(dev, "imon %s: invalid incoming packet " + "size (len = %d, intf%d)\n", __func__, len, intf); + return; + } + + if (debug) { + printk(KERN_INFO "raw packet: "); + for (i = 0; i < len; ++i) + printk("%02x ", buf[i]); + printk("\n"); + } + + /* + * Translate received data to pulse and space lengths. + * Received data is active low, i.e. pulses are 0 and + * spaces are 1. + * + * My original algorithm was essentially similar to + * Changwoo Ryu's with the exception that he switched + * the incoming bits to active high and also fed an + * initial space to LIRC at the start of a new sequence + * if the previous bit was a pulse. + * + * I've decided to adopt his algorithm. + */ + + if (buf[7] == 1 && context->rx.initial_space) { + /* LIRC requires a leading space */ + context->rx.prev_bit = 0; + context->rx.count = 4; + submit_data(context); + context->rx.count = 0; + } + + for (octet = 0; octet < 5; ++octet) { + mask = 0x80; + for (bit = 0; bit < 8; ++bit) { + int curr_bit = !(buf[octet] & mask); + if (curr_bit != context->rx.prev_bit) { + if (context->rx.count) { + submit_data(context); + context->rx.count = 0; + } + context->rx.prev_bit = curr_bit; + } + ++context->rx.count; + mask >>= 1; + } + } + + if (chunk_num == 10) { + if (context->rx.count) { + submit_data(context); + context->rx.count = 0; + } + context->rx.initial_space = context->rx.prev_bit; + } +} + +/** + * Callback function for USB core API: receive data + */ +static void usb_rx_callback(struct urb *urb) +{ + struct imon_context *context; + unsigned char *buf; + int len; + int intfnum = 0; + + if (!urb) + return; + + context = (struct imon_context *)urb->context; + if (!context) + return; + + buf = urb->transfer_buffer; + len = urb->actual_length; + + switch (urb->status) { + case -ENOENT: /* usbcore unlink successful! */ + return; + + case 0: + imon_incoming_packet(context, urb, intfnum); + break; + + default: + dev_warn(context->driver->dev, "imon %s: status(%d): ignored\n", + __func__, urb->status); + break; + } + + usb_submit_urb(context->rx_urb, GFP_ATOMIC); + + return; +} + +/** + * Callback function for USB core API: Probe + */ +static int imon_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *usbdev = NULL; + struct usb_host_interface *iface_desc = NULL; + struct usb_endpoint_descriptor *rx_endpoint = NULL; + struct usb_endpoint_descriptor *tx_endpoint = NULL; + struct urb *rx_urb = NULL; + struct urb *tx_urb = NULL; + struct lirc_driver *driver = NULL; + struct lirc_buffer *rbuf = NULL; + struct device *dev = &interface->dev; + int ifnum; + int lirc_minor = 0; + int num_endpts; + int retval = 0; + int display_ep_found = 0; + int ir_ep_found = 0; + int alloc_status = 0; + int vfd_proto_6p = 0; + int code_length; + struct imon_context *context = NULL; + int i; + u16 vendor, product; + + context = kzalloc(sizeof(struct imon_context), GFP_KERNEL); + if (!context) { + err("%s: kzalloc failed for context", __func__); + alloc_status = 1; + goto alloc_status_switch; + } + + /* + * Try to auto-detect the type of display if the user hasn't set + * it by hand via the display_type modparam. Default is VFD. + */ + if (usb_match_id(interface, ir_only_list)) + context->display = 0; + else + context->display = 1; + + code_length = BUF_CHUNK_SIZE * 8; + + usbdev = usb_get_dev(interface_to_usbdev(interface)); + iface_desc = interface->cur_altsetting; + num_endpts = iface_desc->desc.bNumEndpoints; + ifnum = iface_desc->desc.bInterfaceNumber; + vendor = le16_to_cpu(usbdev->descriptor.idVendor); + product = le16_to_cpu(usbdev->descriptor.idProduct); + + dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n", + __func__, vendor, product, ifnum); + + /* prevent races probing devices w/multiple interfaces */ + mutex_lock(&driver_lock); + + /* + * Scan the endpoint list and set: + * first input endpoint = IR endpoint + * first output endpoint = display endpoint + */ + for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) { + struct usb_endpoint_descriptor *ep; + int ep_dir; + int ep_type; + ep = &iface_desc->endpoint[i].desc; + ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK; + ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + + if (!ir_ep_found && + ep_dir == USB_DIR_IN && + ep_type == USB_ENDPOINT_XFER_INT) { + + rx_endpoint = ep; + ir_ep_found = 1; + dev_dbg(dev, "%s: found IR endpoint\n", __func__); + + } else if (!display_ep_found && ep_dir == USB_DIR_OUT && + ep_type == USB_ENDPOINT_XFER_INT) { + tx_endpoint = ep; + display_ep_found = 1; + dev_dbg(dev, "%s: found display endpoint\n", __func__); + } + } + + /* + * Some iMON receivers have no display. Unfortunately, it seems + * that SoundGraph recycles device IDs between devices both with + * and without... :\ + */ + if (context->display == 0) { + display_ep_found = 0; + dev_dbg(dev, "%s: device has no display\n", __func__); + } + + /* Input endpoint is mandatory */ + if (!ir_ep_found) { + err("%s: no valid input (IR) endpoint found.", __func__); + retval = -ENODEV; + alloc_status = 2; + goto alloc_status_switch; + } + + /* Determine if display requires 6 packets */ + if (display_ep_found) { + if (usb_match_id(interface, vfd_proto_6p_list)) + vfd_proto_6p = 1; + + dev_dbg(dev, "%s: vfd_proto_6p: %d\n", + __func__, vfd_proto_6p); + } + + driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); + if (!driver) { + err("%s: kzalloc failed for lirc_driver", __func__); + alloc_status = 2; + goto alloc_status_switch; + } + rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL); + if (!rbuf) { + err("%s: kmalloc failed for lirc_buffer", __func__); + alloc_status = 3; + goto alloc_status_switch; + } + if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) { + err("%s: lirc_buffer_init failed", __func__); + alloc_status = 4; + goto alloc_status_switch; + } + rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!rx_urb) { + err("%s: usb_alloc_urb failed for IR urb", __func__); + alloc_status = 5; + goto alloc_status_switch; + } + tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!tx_urb) { + err("%s: usb_alloc_urb failed for display urb", + __func__); + alloc_status = 6; + goto alloc_status_switch; + } + + mutex_init(&context->ctx_lock); + context->vfd_proto_6p = vfd_proto_6p; + + strcpy(driver->name, MOD_NAME); + driver->minor = -1; + driver->code_length = sizeof(int) * 8; + driver->sample_rate = 0; + driver->features = LIRC_CAN_REC_MODE2; + driver->data = context; + driver->rbuf = rbuf; + driver->set_use_inc = ir_open; + driver->set_use_dec = ir_close; + driver->dev = &interface->dev; + driver->owner = THIS_MODULE; + + mutex_lock(&context->ctx_lock); + + context->driver = driver; + /* start out in keyboard mode */ + + lirc_minor = lirc_register_driver(driver); + if (lirc_minor < 0) { + err("%s: lirc_register_driver failed", __func__); + alloc_status = 7; + goto alloc_status_switch; + } else + dev_info(dev, "Registered iMON driver " + "(lirc minor: %d)\n", lirc_minor); + + /* Needed while unregistering! */ + driver->minor = lirc_minor; + + context->usbdev = usbdev; + context->dev_present = 1; + context->rx_endpoint = rx_endpoint; + context->rx_urb = rx_urb; + + /* + * tx is used to send characters to lcd/vfd, associate RF + * remotes, set IR protocol, and maybe more... + */ + context->tx_endpoint = tx_endpoint; + context->tx_urb = tx_urb; + + if (display_ep_found) + context->display = 1; + + usb_fill_int_urb(context->rx_urb, context->usbdev, + usb_rcvintpipe(context->usbdev, + context->rx_endpoint->bEndpointAddress), + context->usb_rx_buf, sizeof(context->usb_rx_buf), + usb_rx_callback, context, + context->rx_endpoint->bInterval); + + retval = usb_submit_urb(context->rx_urb, GFP_KERNEL); + + if (retval) { + err("%s: usb_submit_urb failed for intf0 (%d)", + __func__, retval); + mutex_unlock(&context->ctx_lock); + goto exit; + } + + usb_set_intfdata(interface, context); + + if (context->display && ifnum == 0) { + dev_dbg(dev, "%s: Registering iMON display with sysfs\n", + __func__); + + if (usb_register_dev(interface, &imon_class)) { + /* Not a fatal error, so ignore */ + dev_info(dev, "%s: could not get a minor number for " + "display\n", __func__); + } + } + + dev_info(dev, "iMON device (%04x:%04x, intf%d) on " + "usb<%d:%d> initialized\n", vendor, product, ifnum, + usbdev->bus->busnum, usbdev->devnum); + +alloc_status_switch: + mutex_unlock(&context->ctx_lock); + + switch (alloc_status) { + case 7: + usb_free_urb(tx_urb); + case 6: + usb_free_urb(rx_urb); + case 5: + if (rbuf) + lirc_buffer_free(rbuf); + case 4: + kfree(rbuf); + case 3: + kfree(driver); + case 2: + kfree(context); + context = NULL; + case 1: + if (retval != -ENODEV) + retval = -ENOMEM; + break; + case 0: + retval = 0; + } + +exit: + mutex_unlock(&driver_lock); + + return retval; +} + +/** + * Callback function for USB core API: disconnect + */ +static void imon_disconnect(struct usb_interface *interface) +{ + struct imon_context *context; + int ifnum; + + /* prevent races with ir_open()/display_open() */ + mutex_lock(&driver_lock); + + context = usb_get_intfdata(interface); + ifnum = interface->cur_altsetting->desc.bInterfaceNumber; + + mutex_lock(&context->ctx_lock); + + usb_set_intfdata(interface, NULL); + + /* Abort ongoing write */ + if (atomic_read(&context->tx.busy)) { + usb_kill_urb(context->tx_urb); + complete_all(&context->tx.finished); + } + + context->dev_present = 0; + usb_kill_urb(context->rx_urb); + if (context->display) + usb_deregister_dev(interface, &imon_class); + + if (!context->ir_isopen && !context->dev_present) { + deregister_from_lirc(context); + mutex_unlock(&context->ctx_lock); + if (!context->display_isopen) + free_imon_context(context); + } else + mutex_unlock(&context->ctx_lock); + + mutex_unlock(&driver_lock); + + printk(KERN_INFO "%s: iMON device (intf%d) disconnected\n", + __func__, ifnum); +} + +static int imon_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct imon_context *context = usb_get_intfdata(intf); + + usb_kill_urb(context->rx_urb); + + return 0; +} + +static int imon_resume(struct usb_interface *intf) +{ + int rc = 0; + struct imon_context *context = usb_get_intfdata(intf); + + usb_fill_int_urb(context->rx_urb, context->usbdev, + usb_rcvintpipe(context->usbdev, + context->rx_endpoint->bEndpointAddress), + context->usb_rx_buf, sizeof(context->usb_rx_buf), + usb_rx_callback, context, + context->rx_endpoint->bInterval); + + rc = usb_submit_urb(context->rx_urb, GFP_ATOMIC); + + return rc; +} + +static int __init imon_init(void) +{ + int rc; + + printk(KERN_INFO MOD_NAME ": " MOD_DESC ", v" MOD_VERSION "\n"); + + rc = usb_register(&imon_driver); + if (rc) { + err("%s: usb register failed(%d)", __func__, rc); + return -ENODEV; + } + + return 0; +} + +static void __exit imon_exit(void) +{ + usb_deregister(&imon_driver); + printk(KERN_INFO MOD_NAME ": module removed. Goodbye!\n"); +} + +module_init(imon_init); +module_exit(imon_exit); diff --git a/drivers/staging/lirc/lirc_it87.c b/drivers/staging/lirc/lirc_it87.c new file mode 100644 index 0000000..ec11c0e --- /dev/null +++ b/drivers/staging/lirc/lirc_it87.c @@ -0,0 +1,1022 @@ +/* + * LIRC driver for ITE IT8712/IT8705 CIR port + * + * Copyright (C) 2001 Hans-Gunter Lutke Uphues + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + * + * ITE IT8705 and IT8712(not tested) and IT8720 CIR-port support for lirc based + * via cut and paste from lirc_sir.c (C) 2000 Milan Pikula + * + * Attention: Sendmode only tested with debugging logs + * + * 2001/02/27 Christoph Bartelmus : + * reimplemented read function + * 2005/06/05 Andrew Calkin implemented support for Asus Digimatrix, + * based on work of the following member of the Outertrack Digimatrix + * Forum: Art103 + * 2009/12/24 James Edwards implemeted support + * for ITE8704/ITE8718, on my machine, the DSDT reports 8704, but the + * chip identifies as 18. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "lirc_it87.h" + +#ifdef LIRC_IT87_DIGIMATRIX +static int digimatrix = 1; +static int it87_freq = 36; /* kHz */ +static int irq = 9; +#else +static int digimatrix; +static int it87_freq = 38; /* kHz */ +static int irq = IT87_CIR_DEFAULT_IRQ; +#endif + +static unsigned long it87_bits_in_byte_out; +static unsigned long it87_send_counter; +static unsigned char it87_RXEN_mask = IT87_CIR_RCR_RXEN; + +#define RBUF_LEN 1024 + +#define LIRC_DRIVER_NAME "lirc_it87" + +/* timeout for sequences in jiffies (=5/100s) */ +/* must be longer than TIME_CONST */ +#define IT87_TIMEOUT (HZ*5/100) + +/* module parameters */ +static int debug; +#define dprintk(fmt, args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \ + fmt, ## args); \ + } while (0) + +static int io = IT87_CIR_DEFAULT_IOBASE; +/* receiver demodulator default: off */ +static int it87_enable_demodulator; + +static int timer_enabled; +static DEFINE_SPINLOCK(timer_lock); +static struct timer_list timerlist; +/* time of last signal change detected */ +static struct timeval last_tv = {0, 0}; +/* time of last UART data ready interrupt */ +static struct timeval last_intr_tv = {0, 0}; +static int last_value; + +static DECLARE_WAIT_QUEUE_HEAD(lirc_read_queue); + +static DEFINE_SPINLOCK(hardware_lock); +static DEFINE_SPINLOCK(dev_lock); +static bool device_open; + +static int rx_buf[RBUF_LEN]; +unsigned int rx_tail, rx_head; + +static struct pnp_driver it87_pnp_driver; + +/* SECTION: Prototypes */ + +/* Communication with user-space */ +static int lirc_open(struct inode *inode, struct file *file); +static int lirc_close(struct inode *inode, struct file *file); +static unsigned int lirc_poll(struct file *file, poll_table *wait); +static ssize_t lirc_read(struct file *file, char *buf, + size_t count, loff_t *ppos); +static ssize_t lirc_write(struct file *file, const char *buf, + size_t n, loff_t *pos); +static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); +static void add_read_queue(int flag, unsigned long val); +static int init_chrdev(void); +static void drop_chrdev(void); +/* Hardware */ +static irqreturn_t it87_interrupt(int irq, void *dev_id); +static void send_space(unsigned long len); +static void send_pulse(unsigned long len); +static void init_send(void); +static void terminate_send(unsigned long len); +static int init_hardware(void); +static void drop_hardware(void); +/* Initialisation */ +static int init_port(void); +static void drop_port(void); + + +/* SECTION: Communication with user-space */ + +static int lirc_open(struct inode *inode, struct file *file) +{ + spin_lock(&dev_lock); + if (device_open) { + spin_unlock(&dev_lock); + return -EBUSY; + } + device_open = true; + spin_unlock(&dev_lock); + return 0; +} + + +static int lirc_close(struct inode *inode, struct file *file) +{ + spin_lock(&dev_lock); + device_open = false; + spin_unlock(&dev_lock); + return 0; +} + + +static unsigned int lirc_poll(struct file *file, poll_table *wait) +{ + poll_wait(file, &lirc_read_queue, wait); + if (rx_head != rx_tail) + return POLLIN | POLLRDNORM; + return 0; +} + + +static ssize_t lirc_read(struct file *file, char *buf, + size_t count, loff_t *ppos) +{ + int n = 0; + int retval = 0; + + while (n < count) { + if (file->f_flags & O_NONBLOCK && rx_head == rx_tail) { + retval = -EAGAIN; + break; + } + retval = wait_event_interruptible(lirc_read_queue, + rx_head != rx_tail); + if (retval) + break; + + if (copy_to_user((void *) buf + n, (void *) (rx_buf + rx_head), + sizeof(int))) { + retval = -EFAULT; + break; + } + rx_head = (rx_head + 1) & (RBUF_LEN - 1); + n += sizeof(int); + } + if (n) + return n; + return retval; +} + + +static ssize_t lirc_write(struct file *file, const char *buf, + size_t n, loff_t *pos) +{ + int i = 0; + int *tx_buf; + + if (n % sizeof(int)) + return -EINVAL; + tx_buf = memdup_user(buf, n); + if (IS_ERR(tx_buf)) + return PTR_ERR(tx_buf); + n /= sizeof(int); + init_send(); + while (1) { + if (i >= n) + break; + if (tx_buf[i]) + send_pulse(tx_buf[i]); + i++; + if (i >= n) + break; + if (tx_buf[i]) + send_space(tx_buf[i]); + i++; + } + terminate_send(tx_buf[i - 1]); + return n; +} + + +static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) +{ + int retval = 0; + unsigned long value = 0; + unsigned int ivalue; + unsigned long hw_flags; + + if (cmd == LIRC_GET_FEATURES) + value = LIRC_CAN_SEND_PULSE | + LIRC_CAN_SET_SEND_CARRIER | + LIRC_CAN_REC_MODE2; + else if (cmd == LIRC_GET_SEND_MODE) + value = LIRC_MODE_PULSE; + else if (cmd == LIRC_GET_REC_MODE) + value = LIRC_MODE_MODE2; + + switch (cmd) { + case LIRC_GET_FEATURES: + case LIRC_GET_SEND_MODE: + case LIRC_GET_REC_MODE: + retval = put_user(value, (unsigned long *) arg); + break; + + case LIRC_SET_SEND_MODE: + case LIRC_SET_REC_MODE: + retval = get_user(value, (unsigned long *) arg); + break; + + case LIRC_SET_SEND_CARRIER: + retval = get_user(ivalue, (unsigned int *) arg); + if (retval) + return retval; + ivalue /= 1000; + if (ivalue > IT87_CIR_FREQ_MAX || + ivalue < IT87_CIR_FREQ_MIN) + return -EINVAL; + + it87_freq = ivalue; + + spin_lock_irqsave(&hardware_lock, hw_flags); + outb(((inb(io + IT87_CIR_TCR2) & IT87_CIR_TCR2_TXMPW) | + (it87_freq - IT87_CIR_FREQ_MIN) << 3), + io + IT87_CIR_TCR2); + spin_unlock_irqrestore(&hardware_lock, hw_flags); + dprintk("demodulation frequency: %d kHz\n", it87_freq); + + break; + + default: + retval = -EINVAL; + } + + if (retval) + return retval; + + if (cmd == LIRC_SET_REC_MODE) { + if (value != LIRC_MODE_MODE2) + retval = -ENOSYS; + } else if (cmd == LIRC_SET_SEND_MODE) { + if (value != LIRC_MODE_PULSE) + retval = -ENOSYS; + } + return retval; +} + +static void add_read_queue(int flag, unsigned long val) +{ + unsigned int new_rx_tail; + int newval; + + dprintk("add flag %d with val %lu\n", flag, val); + + newval = val & PULSE_MASK; + + /* + * statistically, pulses are ~TIME_CONST/2 too long. we could + * maybe make this more exact, but this is good enough + */ + if (flag) { + /* pulse */ + if (newval > TIME_CONST / 2) + newval -= TIME_CONST / 2; + else /* should not ever happen */ + newval = 1; + newval |= PULSE_BIT; + } else + newval += TIME_CONST / 2; + new_rx_tail = (rx_tail + 1) & (RBUF_LEN - 1); + if (new_rx_tail == rx_head) { + dprintk("Buffer overrun.\n"); + return; + } + rx_buf[rx_tail] = newval; + rx_tail = new_rx_tail; + wake_up_interruptible(&lirc_read_queue); +} + + +static const struct file_operations lirc_fops = { + .owner = THIS_MODULE, + .read = lirc_read, + .write = lirc_write, + .poll = lirc_poll, + .unlocked_ioctl = lirc_ioctl, + .open = lirc_open, + .release = lirc_close, +}; + +static int set_use_inc(void *data) +{ + return 0; +} + +static void set_use_dec(void *data) +{ +} + +static struct lirc_driver driver = { + .name = LIRC_DRIVER_NAME, + .minor = -1, + .code_length = 1, + .sample_rate = 0, + .data = NULL, + .add_to_buf = NULL, + .set_use_inc = set_use_inc, + .set_use_dec = set_use_dec, + .fops = &lirc_fops, + .dev = NULL, + .owner = THIS_MODULE, +}; + + +static int init_chrdev(void) +{ + driver.minor = lirc_register_driver(&driver); + + if (driver.minor < 0) { + printk(KERN_ERR LIRC_DRIVER_NAME ": init_chrdev() failed.\n"); + return -EIO; + } + return 0; +} + + +static void drop_chrdev(void) +{ + lirc_unregister_driver(driver.minor); +} + + +/* SECTION: Hardware */ +static long delta(struct timeval *tv1, struct timeval *tv2) +{ + unsigned long deltv; + + deltv = tv2->tv_sec - tv1->tv_sec; + if (deltv > 15) + deltv = 0xFFFFFF; + else + deltv = deltv*1000000 + tv2->tv_usec - tv1->tv_usec; + return deltv; +} + +static void it87_timeout(unsigned long data) +{ + unsigned long flags; + + /* avoid interference with interrupt */ + spin_lock_irqsave(&timer_lock, flags); + + if (digimatrix) { + /* We have timed out. Disable the RX mechanism. */ + + outb((inb(io + IT87_CIR_RCR) & ~IT87_CIR_RCR_RXEN) | + IT87_CIR_RCR_RXACT, io + IT87_CIR_RCR); + if (it87_RXEN_mask) + outb(inb(io + IT87_CIR_RCR) | IT87_CIR_RCR_RXEN, + io + IT87_CIR_RCR); + dprintk(" TIMEOUT\n"); + timer_enabled = 0; + + /* fifo clear */ + outb(inb(io + IT87_CIR_TCR1) | IT87_CIR_TCR1_FIFOCLR, + io+IT87_CIR_TCR1); + + } else { + /* + * if last received signal was a pulse, but receiving stopped + * within the 9 bit frame, we need to finish this pulse and + * simulate a signal change to from pulse to space. Otherwise + * upper layers will receive two sequences next time. + */ + + if (last_value) { + unsigned long pulse_end; + + /* determine 'virtual' pulse end: */ + pulse_end = delta(&last_tv, &last_intr_tv); + dprintk("timeout add %d for %lu usec\n", + last_value, pulse_end); + add_read_queue(last_value, pulse_end); + last_value = 0; + last_tv = last_intr_tv; + } + } + spin_unlock_irqrestore(&timer_lock, flags); +} + +static irqreturn_t it87_interrupt(int irq, void *dev_id) +{ + unsigned char data; + struct timeval curr_tv; + static unsigned long deltv; + unsigned long deltintrtv; + unsigned long flags, hw_flags; + int iir, lsr; + int fifo = 0; + static char lastbit; + char bit; + + /* Bit duration in microseconds */ + const unsigned long bit_duration = 1000000ul / + (115200 / IT87_CIR_BAUDRATE_DIVISOR); + + + iir = inb(io + IT87_CIR_IIR); + + switch (iir & IT87_CIR_IIR_IID) { + case 0x4: + case 0x6: + lsr = inb(io + IT87_CIR_RSR) & (IT87_CIR_RSR_RXFTO | + IT87_CIR_RSR_RXFBC); + fifo = lsr & IT87_CIR_RSR_RXFBC; + dprintk("iir: 0x%x fifo: 0x%x\n", iir, lsr); + + /* avoid interference with timer */ + spin_lock_irqsave(&timer_lock, flags); + spin_lock_irqsave(&hardware_lock, hw_flags); + if (digimatrix) { + static unsigned long acc_pulse; + static unsigned long acc_space; + + do { + data = inb(io + IT87_CIR_DR); + data = ~data; + fifo--; + if (data != 0x00) { + if (timer_enabled) + del_timer(&timerlist); + /* + * start timer for end of + * sequence detection + */ + timerlist.expires = jiffies + + IT87_TIMEOUT; + add_timer(&timerlist); + timer_enabled = 1; + } + /* Loop through */ + for (bit = 0; bit < 8; ++bit) { + if ((data >> bit) & 1) { + ++acc_pulse; + if (lastbit == 0) { + add_read_queue(0, + acc_space * + bit_duration); + acc_space = 0; + } + } else { + ++acc_space; + if (lastbit == 1) { + add_read_queue(1, + acc_pulse * + bit_duration); + acc_pulse = 0; + } + } + lastbit = (data >> bit) & 1; + } + + } while (fifo != 0); + } else { /* Normal Operation */ + do { + del_timer(&timerlist); + data = inb(io + IT87_CIR_DR); + + dprintk("data=%02x\n", data); + do_gettimeofday(&curr_tv); + deltv = delta(&last_tv, &curr_tv); + deltintrtv = delta(&last_intr_tv, &curr_tv); + + dprintk("t %lu , d %d\n", + deltintrtv, (int)data); + + /* + * if nothing came in last 2 cycles, + * it was gap + */ + if (deltintrtv > TIME_CONST * 2) { + if (last_value) { + dprintk("GAP\n"); + + /* simulate signal change */ + add_read_queue(last_value, + deltv - + deltintrtv); + last_value = 0; + last_tv.tv_sec = + last_intr_tv.tv_sec; + last_tv.tv_usec = + last_intr_tv.tv_usec; + deltv = deltintrtv; + } + } + data = 1; + if (data ^ last_value) { + /* + * deltintrtv > 2*TIME_CONST, + * remember ? the other case is + * timeout + */ + add_read_queue(last_value, + deltv-TIME_CONST); + last_value = data; + last_tv = curr_tv; + if (last_tv.tv_usec >= TIME_CONST) + last_tv.tv_usec -= TIME_CONST; + else { + last_tv.tv_sec--; + last_tv.tv_usec += 1000000 - + TIME_CONST; + } + } + last_intr_tv = curr_tv; + if (data) { + /* + * start timer for end of + * sequence detection + */ + timerlist.expires = + jiffies + IT87_TIMEOUT; + add_timer(&timerlist); + } + outb((inb(io + IT87_CIR_RCR) & + ~IT87_CIR_RCR_RXEN) | + IT87_CIR_RCR_RXACT, + io + IT87_CIR_RCR); + if (it87_RXEN_mask) + outb(inb(io + IT87_CIR_RCR) | + IT87_CIR_RCR_RXEN, + io + IT87_CIR_RCR); + fifo--; + } while (fifo != 0); + } + spin_unlock_irqrestore(&hardware_lock, hw_flags); + spin_unlock_irqrestore(&timer_lock, flags); + + return IRQ_RETVAL(IRQ_HANDLED); + + default: + /* not our irq */ + dprintk("unknown IRQ (shouldn't happen) !!\n"); + return IRQ_RETVAL(IRQ_NONE); + } +} + + +static void send_it87(unsigned long len, unsigned long stime, + unsigned char send_byte, unsigned int count_bits) +{ + long count = len / stime; + long time_left = 0; + static unsigned char byte_out; + unsigned long hw_flags; + + dprintk("%s: len=%ld, sb=%d\n", __func__, len, send_byte); + + time_left = (long)len - (long)count * (long)stime; + count += ((2 * time_left) / stime); + while (count) { + long i = 0; + for (i = 0; i < count_bits; i++) { + byte_out = (byte_out << 1) | (send_byte & 1); + it87_bits_in_byte_out++; + } + if (it87_bits_in_byte_out == 8) { + dprintk("out=0x%x, tsr_txfbc: 0x%x\n", + byte_out, + inb(io + IT87_CIR_TSR) & + IT87_CIR_TSR_TXFBC); + + while ((inb(io + IT87_CIR_TSR) & + IT87_CIR_TSR_TXFBC) >= IT87_CIR_FIFO_SIZE) + ; + + spin_lock_irqsave(&hardware_lock, hw_flags); + outb(byte_out, io + IT87_CIR_DR); + spin_unlock_irqrestore(&hardware_lock, hw_flags); + + it87_bits_in_byte_out = 0; + it87_send_counter++; + byte_out = 0; + } + count--; + } +} + + +/*TODO: maybe exchange space and pulse because it8705 only modulates 0-bits */ + +static void send_space(unsigned long len) +{ + send_it87(len, TIME_CONST, IT87_CIR_SPACE, IT87_CIR_BAUDRATE_DIVISOR); +} + +static void send_pulse(unsigned long len) +{ + send_it87(len, TIME_CONST, IT87_CIR_PULSE, IT87_CIR_BAUDRATE_DIVISOR); +} + + +static void init_send() +{ + unsigned long flags; + + spin_lock_irqsave(&hardware_lock, flags); + /* RXEN=0: receiver disable */ + it87_RXEN_mask = 0; + outb(inb(io + IT87_CIR_RCR) & ~IT87_CIR_RCR_RXEN, + io + IT87_CIR_RCR); + spin_unlock_irqrestore(&hardware_lock, flags); + it87_bits_in_byte_out = 0; + it87_send_counter = 0; +} + + +static void terminate_send(unsigned long len) +{ + unsigned long flags; + unsigned long last = 0; + + last = it87_send_counter; + /* make sure all necessary data has been sent */ + while (last == it87_send_counter) + send_space(len); + /* wait until all data sent */ + while ((inb(io + IT87_CIR_TSR) & IT87_CIR_TSR_TXFBC) != 0) + ; + /* then re-enable receiver */ + spin_lock_irqsave(&hardware_lock, flags); + it87_RXEN_mask = IT87_CIR_RCR_RXEN; + outb(inb(io + IT87_CIR_RCR) | IT87_CIR_RCR_RXEN, + io + IT87_CIR_RCR); + spin_unlock_irqrestore(&hardware_lock, flags); +} + + +static int init_hardware(void) +{ + unsigned long flags; + unsigned char it87_rcr = 0; + + spin_lock_irqsave(&hardware_lock, flags); + /* init cir-port */ + /* enable r/w-access to Baudrate-Register */ + outb(IT87_CIR_IER_BR, io + IT87_CIR_IER); + outb(IT87_CIR_BAUDRATE_DIVISOR % 0x100, io+IT87_CIR_BDLR); + outb(IT87_CIR_BAUDRATE_DIVISOR / 0x100, io+IT87_CIR_BDHR); + /* Baudrate Register off, define IRQs: Input only */ + if (digimatrix) { + outb(IT87_CIR_IER_IEC | IT87_CIR_IER_RFOIE, io + IT87_CIR_IER); + /* RX: HCFS=0, RXDCR = 001b (33,75..38,25 kHz), RXEN=1 */ + } else { + outb(IT87_CIR_IER_IEC | IT87_CIR_IER_RDAIE, io + IT87_CIR_IER); + /* RX: HCFS=0, RXDCR = 001b (35,6..40,3 kHz), RXEN=1 */ + } + it87_rcr = (IT87_CIR_RCR_RXEN & it87_RXEN_mask) | 0x1; + if (it87_enable_demodulator) + it87_rcr |= IT87_CIR_RCR_RXEND; + outb(it87_rcr, io + IT87_CIR_RCR); + if (digimatrix) { + /* Set FIFO depth to 1 byte, and disable TX */ + outb(inb(io + IT87_CIR_TCR1) | 0x00, + io + IT87_CIR_TCR1); + + /* + * TX: it87_freq (36kHz), 'reserved' sensitivity + * setting (0x00) + */ + outb(((it87_freq - IT87_CIR_FREQ_MIN) << 3) | 0x00, + io + IT87_CIR_TCR2); + } else { + /* TX: 38kHz, 13,3us (pulse-width) */ + outb(((it87_freq - IT87_CIR_FREQ_MIN) << 3) | 0x06, + io + IT87_CIR_TCR2); + } + spin_unlock_irqrestore(&hardware_lock, flags); + return 0; +} + + +static void drop_hardware(void) +{ + unsigned long flags; + + spin_lock_irqsave(&hardware_lock, flags); + disable_irq(irq); + /* receiver disable */ + it87_RXEN_mask = 0; + outb(0x1, io + IT87_CIR_RCR); + /* turn off irqs */ + outb(0, io + IT87_CIR_IER); + /* fifo clear */ + outb(IT87_CIR_TCR1_FIFOCLR, io+IT87_CIR_TCR1); + /* reset */ + outb(IT87_CIR_IER_RESET, io+IT87_CIR_IER); + enable_irq(irq); + spin_unlock_irqrestore(&hardware_lock, flags); +} + + +static unsigned char it87_read(unsigned char port) +{ + outb(port, IT87_ADRPORT); + return inb(IT87_DATAPORT); +} + + +static void it87_write(unsigned char port, unsigned char data) +{ + outb(port, IT87_ADRPORT); + outb(data, IT87_DATAPORT); +} + + +/* SECTION: Initialisation */ + +static int init_port(void) +{ + unsigned long hw_flags; + int retval = 0; + + unsigned char init_bytes[4] = IT87_INIT; + unsigned char it87_chipid = 0; + unsigned char ldn = 0; + unsigned int it87_io = 0; + unsigned int it87_irq = 0; + + /* Enter MB PnP Mode */ + outb(init_bytes[0], IT87_ADRPORT); + outb(init_bytes[1], IT87_ADRPORT); + outb(init_bytes[2], IT87_ADRPORT); + outb(init_bytes[3], IT87_ADRPORT); + + /* 8712 or 8705 ? */ + it87_chipid = it87_read(IT87_CHIP_ID1); + if (it87_chipid != 0x87) { + retval = -ENXIO; + return retval; + } + it87_chipid = it87_read(IT87_CHIP_ID2); + if ((it87_chipid != 0x05) && + (it87_chipid != 0x12) && + (it87_chipid != 0x18) && + (it87_chipid != 0x20)) { + printk(KERN_INFO LIRC_DRIVER_NAME + ": no IT8704/05/12/18/20 found (claimed IT87%02x), " + "exiting..\n", it87_chipid); + retval = -ENXIO; + return retval; + } + printk(KERN_INFO LIRC_DRIVER_NAME + ": found IT87%02x.\n", + it87_chipid); + + /* get I/O-Port and IRQ */ + if (it87_chipid == 0x12 || it87_chipid == 0x18) + ldn = IT8712_CIR_LDN; + else + ldn = IT8705_CIR_LDN; + it87_write(IT87_LDN, ldn); + + it87_io = it87_read(IT87_CIR_BASE_MSB) * 256 + + it87_read(IT87_CIR_BASE_LSB); + if (it87_io == 0) { + if (io == 0) + io = IT87_CIR_DEFAULT_IOBASE; + printk(KERN_INFO LIRC_DRIVER_NAME + ": set default io 0x%x\n", + io); + it87_write(IT87_CIR_BASE_MSB, io / 0x100); + it87_write(IT87_CIR_BASE_LSB, io % 0x100); + } else + io = it87_io; + + it87_irq = it87_read(IT87_CIR_IRQ); + if (digimatrix || it87_irq == 0) { + if (irq == 0) + irq = IT87_CIR_DEFAULT_IRQ; + printk(KERN_INFO LIRC_DRIVER_NAME + ": set default irq 0x%x\n", + irq); + it87_write(IT87_CIR_IRQ, irq); + } else + irq = it87_irq; + + spin_lock_irqsave(&hardware_lock, hw_flags); + /* reset */ + outb(IT87_CIR_IER_RESET, io+IT87_CIR_IER); + /* fifo clear */ + outb(IT87_CIR_TCR1_FIFOCLR | + /* IT87_CIR_TCR1_ILE | */ + IT87_CIR_TCR1_TXRLE | + IT87_CIR_TCR1_TXENDF, io+IT87_CIR_TCR1); + spin_unlock_irqrestore(&hardware_lock, hw_flags); + + /* get I/O port access and IRQ line */ + if (request_region(io, 8, LIRC_DRIVER_NAME) == NULL) { + printk(KERN_ERR LIRC_DRIVER_NAME + ": i/o port 0x%.4x already in use.\n", io); + /* Leaving MB PnP Mode */ + it87_write(IT87_CFGCTRL, 0x2); + return -EBUSY; + } + + /* activate CIR-Device */ + it87_write(IT87_CIR_ACT, 0x1); + + /* Leaving MB PnP Mode */ + it87_write(IT87_CFGCTRL, 0x2); + + retval = request_irq(irq, it87_interrupt, 0 /*IRQF_DISABLED*/, + LIRC_DRIVER_NAME, NULL); + if (retval < 0) { + printk(KERN_ERR LIRC_DRIVER_NAME + ": IRQ %d already in use.\n", + irq); + release_region(io, 8); + return retval; + } + + printk(KERN_INFO LIRC_DRIVER_NAME + ": I/O port 0x%.4x, IRQ %d.\n", io, irq); + + init_timer(&timerlist); + timerlist.function = it87_timeout; + timerlist.data = 0xabadcafe; + + return 0; +} + + +static void drop_port(void) +{ +#if 0 + unsigned char init_bytes[4] = IT87_INIT; + + /* Enter MB PnP Mode */ + outb(init_bytes[0], IT87_ADRPORT); + outb(init_bytes[1], IT87_ADRPORT); + outb(init_bytes[2], IT87_ADRPORT); + outb(init_bytes[3], IT87_ADRPORT); + + /* deactivate CIR-Device */ + it87_write(IT87_CIR_ACT, 0x0); + + /* Leaving MB PnP Mode */ + it87_write(IT87_CFGCTRL, 0x2); +#endif + + del_timer_sync(&timerlist); + free_irq(irq, NULL); + release_region(io, 8); +} + + +static int init_lirc_it87(void) +{ + int retval; + + init_waitqueue_head(&lirc_read_queue); + retval = init_port(); + if (retval < 0) + return retval; + init_hardware(); + printk(KERN_INFO LIRC_DRIVER_NAME ": Installed.\n"); + return 0; +} + +static int it87_probe(struct pnp_dev *pnp_dev, + const struct pnp_device_id *dev_id) +{ + int retval; + + driver.dev = &pnp_dev->dev; + + retval = init_chrdev(); + if (retval < 0) + return retval; + + retval = init_lirc_it87(); + if (retval) + goto init_lirc_it87_failed; + + return 0; + +init_lirc_it87_failed: + drop_chrdev(); + + return retval; +} + +static int __init lirc_it87_init(void) +{ + return pnp_register_driver(&it87_pnp_driver); +} + + +static void __exit lirc_it87_exit(void) +{ + drop_hardware(); + drop_chrdev(); + drop_port(); + pnp_unregister_driver(&it87_pnp_driver); + printk(KERN_INFO LIRC_DRIVER_NAME ": Uninstalled.\n"); +} + +/* SECTION: PNP for ITE8704/18 */ + +static const struct pnp_device_id pnp_dev_table[] = { + {"ITE8704", 0}, + {} +}; + +MODULE_DEVICE_TABLE(pnp, pnp_dev_table); + +static struct pnp_driver it87_pnp_driver = { + .name = LIRC_DRIVER_NAME, + .id_table = pnp_dev_table, + .probe = it87_probe, +}; + +module_init(lirc_it87_init); +module_exit(lirc_it87_exit); + +MODULE_DESCRIPTION("LIRC driver for ITE IT8704/05/12/18/20 CIR port"); +MODULE_AUTHOR("Hans-Gunter Lutke Uphues"); +MODULE_LICENSE("GPL"); + +module_param(io, int, S_IRUGO); +MODULE_PARM_DESC(io, "I/O base address (default: 0x310)"); + +module_param(irq, int, S_IRUGO); +#ifdef LIRC_IT87_DIGIMATRIX +MODULE_PARM_DESC(irq, "Interrupt (1,3-12) (default: 9)"); +#else +MODULE_PARM_DESC(irq, "Interrupt (1,3-12) (default: 7)"); +#endif + +module_param(it87_enable_demodulator, bool, S_IRUGO); +MODULE_PARM_DESC(it87_enable_demodulator, + "Receiver demodulator enable/disable (1/0), default: 0"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging messages"); + +module_param(digimatrix, bool, S_IRUGO | S_IWUSR); +#ifdef LIRC_IT87_DIGIMATRIX +MODULE_PARM_DESC(digimatrix, + "Asus Digimatrix it87 compat. enable/disable (1/0), default: 1"); +#else +MODULE_PARM_DESC(digimatrix, + "Asus Digimatrix it87 compat. enable/disable (1/0), default: 0"); +#endif + + +module_param(it87_freq, int, S_IRUGO); +#ifdef LIRC_IT87_DIGIMATRIX +MODULE_PARM_DESC(it87_freq, + "Carrier demodulator frequency (kHz), (default: 36)"); +#else +MODULE_PARM_DESC(it87_freq, + "Carrier demodulator frequency (kHz), (default: 38)"); +#endif diff --git a/drivers/staging/lirc/lirc_it87.h b/drivers/staging/lirc/lirc_it87.h new file mode 100644 index 0000000..cf021c8 --- /dev/null +++ b/drivers/staging/lirc/lirc_it87.h @@ -0,0 +1,116 @@ +/* lirc_it87.h */ +/* SECTION: Definitions */ + +/********************************* ITE IT87xx ************************/ + +/* based on the following documentation from ITE: + a) IT8712F Preliminary CIR Programming Guide V0.1 + b) IT8705F Simple LPC I/O Preliminary Specification V0.3 + c) IT8712F EC-LPC I/O Preliminary Specification V0.5 +*/ + +/* IT8712/05 Ports: */ +#define IT87_ADRPORT 0x2e +#define IT87_DATAPORT 0x2f +#define IT87_INIT {0x87, 0x01, 0x55, 0x55} + +/* alternate Ports: */ +/* +#define IT87_ADRPORT 0x4e +#define IT87_DATAPORT 0x4f +#define IT87_INIT {0x87, 0x01, 0x55, 0xaa} + */ + +/* IT8712/05 Registers */ +#define IT87_CFGCTRL 0x2 +#define IT87_LDN 0x7 +#define IT87_CHIP_ID1 0x20 +#define IT87_CHIP_ID2 0x21 +#define IT87_CFG_VERSION 0x22 +#define IT87_SWSUSPEND 0x23 + +#define IT8712_CIR_LDN 0xa +#define IT8705_CIR_LDN 0x7 + +/* CIR Configuration Registers: */ +#define IT87_CIR_ACT 0x30 +#define IT87_CIR_BASE_MSB 0x60 +#define IT87_CIR_BASE_LSB 0x61 +#define IT87_CIR_IRQ 0x70 +#define IT87_CIR_CONFIG 0xf0 + +/* List of IT87_CIR registers: offset to BaseAddr */ +#define IT87_CIR_DR 0 +#define IT87_CIR_IER 1 +#define IT87_CIR_RCR 2 +#define IT87_CIR_TCR1 3 +#define IT87_CIR_TCR2 4 +#define IT87_CIR_TSR 5 +#define IT87_CIR_RSR 6 +#define IT87_CIR_BDLR 5 +#define IT87_CIR_BDHR 6 +#define IT87_CIR_IIR 7 + +/* Bit Definition */ +/* IER: */ +#define IT87_CIR_IER_TM_EN 0x80 +#define IT87_CIR_IER_RESEVED 0x40 +#define IT87_CIR_IER_RESET 0x20 +#define IT87_CIR_IER_BR 0x10 +#define IT87_CIR_IER_IEC 0x8 +#define IT87_CIR_IER_RFOIE 0x4 +#define IT87_CIR_IER_RDAIE 0x2 +#define IT87_CIR_IER_TLDLIE 0x1 + +/* RCR: */ +#define IT87_CIR_RCR_RDWOS 0x80 +#define IT87_CIR_RCR_HCFS 0x40 +#define IT87_CIR_RCR_RXEN 0x20 +#define IT87_CIR_RCR_RXEND 0x10 +#define IT87_CIR_RCR_RXACT 0x8 +#define IT87_CIR_RCR_RXDCR 0x7 + +/* TCR1: */ +#define IT87_CIR_TCR1_FIFOCLR 0x80 +#define IT87_CIR_TCR1_ILE 0x40 +#define IT87_CIR_TCR1_FIFOTL 0x30 +#define IT87_CIR_TCR1_TXRLE 0x8 +#define IT87_CIR_TCR1_TXENDF 0x4 +#define IT87_CIR_TCR1_TXMPM 0x3 + +/* TCR2: */ +#define IT87_CIR_TCR2_CFQ 0xf8 +#define IT87_CIR_TCR2_TXMPW 0x7 + +/* TSR: */ +#define IT87_CIR_TSR_RESERVED 0xc0 +#define IT87_CIR_TSR_TXFBC 0x3f + +/* RSR: */ +#define IT87_CIR_RSR_RXFTO 0x80 +#define IT87_CIR_RSR_RESERVED 0x40 +#define IT87_CIR_RSR_RXFBC 0x3f + +/* IIR: */ +#define IT87_CIR_IIR_RESERVED 0xf8 +#define IT87_CIR_IIR_IID 0x6 +#define IT87_CIR_IIR_IIP 0x1 + +/* TM: */ +#define IT87_CIR_TM_IL_SEL 0x80 +#define IT87_CIR_TM_RESERVED 0x40 +#define IT87_CIR_TM_TM_REG 0x3f + +#define IT87_CIR_FIFO_SIZE 32 + +/* Baudratedivisor for IT87: power of 2: only 1,2,4 or 8) */ +#define IT87_CIR_BAUDRATE_DIVISOR 0x1 +#define IT87_CIR_DEFAULT_IOBASE 0x310 +#define IT87_CIR_DEFAULT_IRQ 0x7 +#define IT87_CIR_SPACE 0x00 +#define IT87_CIR_PULSE 0xff +#define IT87_CIR_FREQ_MIN 27 +#define IT87_CIR_FREQ_MAX 58 +#define TIME_CONST (IT87_CIR_BAUDRATE_DIVISOR * 8000000ul / 115200ul) + +/********************************* ITE IT87xx ************************/ diff --git a/drivers/staging/lirc/lirc_ite8709.c b/drivers/staging/lirc/lirc_ite8709.c new file mode 100644 index 0000000..9352f45 --- /dev/null +++ b/drivers/staging/lirc/lirc_ite8709.c @@ -0,0 +1,542 @@ +/* + * LIRC driver for ITE8709 CIR port + * + * Copyright (C) 2008 Grégory Lardière + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#define LIRC_DRIVER_NAME "lirc_ite8709" + +#define BUF_CHUNK_SIZE sizeof(int) +#define BUF_SIZE (128*BUF_CHUNK_SIZE) + +/* + * The ITE8709 device seems to be the combination of IT8512 superIO chip and + * a specific firmware running on the IT8512's embedded micro-controller. + * In addition of the embedded micro-controller, the IT8512 chip contains a + * CIR module and several other modules. A few modules are directly accessible + * by the host CPU, but most of them are only accessible by the + * micro-controller. The CIR module is only accessible by the micro-controller. + * The battery-backed SRAM module is accessible by the host CPU and the + * micro-controller. So one of the MC's firmware role is to act as a bridge + * between the host CPU and the CIR module. The firmware implements a kind of + * communication protocol using the SRAM module as a shared memory. The IT8512 + * specification is publicly available on ITE's web site, but the communication + * protocol is not, so it was reverse-engineered. + */ + +/* ITE8709 Registers addresses and values (reverse-engineered) */ +#define ITE8709_MODE 0x1a +#define ITE8709_REG_ADR 0x1b +#define ITE8709_REG_VAL 0x1c +#define ITE8709_IIR 0x1e /* Interrupt identification register */ +#define ITE8709_RFSR 0x1f /* Receiver FIFO status register */ +#define ITE8709_FIFO_START 0x20 + +#define ITE8709_MODE_READY 0X00 +#define ITE8709_MODE_WRITE 0X01 +#define ITE8709_MODE_READ 0X02 +#define ITE8709_IIR_RDAI 0x02 /* Receiver data available interrupt */ +#define ITE8709_IIR_RFOI 0x04 /* Receiver FIFO overrun interrupt */ +#define ITE8709_RFSR_MASK 0x3f /* FIFO byte count mask */ + +/* + * IT8512 CIR-module registers addresses and values + * (from IT8512 E/F specification v0.4.1) + */ +#define IT8512_REG_MSTCR 0x01 /* Master control register */ +#define IT8512_REG_IER 0x02 /* Interrupt enable register */ +#define IT8512_REG_CFR 0x04 /* Carrier frequency register */ +#define IT8512_REG_RCR 0x05 /* Receive control register */ +#define IT8512_REG_BDLR 0x08 /* Baud rate divisor low byte register */ +#define IT8512_REG_BDHR 0x09 /* Baud rate divisor high byte register */ + +#define IT8512_MSTCR_RESET 0x01 /* Reset registers to default value */ +#define IT8512_MSTCR_FIFOCLR 0x02 /* Clear FIFO */ +#define IT8512_MSTCR_FIFOTL_7 0x04 /* FIFO threshold level : 7 */ +#define IT8512_MSTCR_FIFOTL_25 0x0c /* FIFO threshold level : 25 */ +#define IT8512_IER_RDAIE 0x02 /* Enable data interrupt request */ +#define IT8512_IER_RFOIE 0x04 /* Enable FIFO overrun interrupt req */ +#define IT8512_IER_IEC 0x80 /* Enable interrupt request */ +#define IT8512_CFR_CF_36KHZ 0x09 /* Carrier freq : low speed, 36kHz */ +#define IT8512_RCR_RXDCR_1 0x01 /* Demodulation carrier range : 1 */ +#define IT8512_RCR_RXACT 0x08 /* Receiver active */ +#define IT8512_RCR_RXEN 0x80 /* Receiver enable */ +#define IT8512_BDR_6 6 /* Baud rate divisor : 6 */ + +/* Actual values used by this driver */ +#define CFG_FIFOTL IT8512_MSTCR_FIFOTL_25 +#define CFG_CR_FREQ IT8512_CFR_CF_36KHZ +#define CFG_DCR IT8512_RCR_RXDCR_1 +#define CFG_BDR IT8512_BDR_6 +#define CFG_TIMEOUT 100000 /* Rearm interrupt when a space is > 100 ms */ + +static int debug; + +struct ite8709_device { + int use_count; + int io; + int irq; + spinlock_t hardware_lock; + unsigned long long acc_pulse; + unsigned long long acc_space; + char lastbit; + struct timeval last_tv; + struct lirc_driver driver; + struct tasklet_struct tasklet; + char force_rearm; + char rearmed; + char device_busy; +}; + +#define dprintk(fmt, args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \ + fmt, ## args); \ + } while (0) + + +static unsigned char ite8709_read(struct ite8709_device *dev, + unsigned char port) +{ + outb(port, dev->io); + return inb(dev->io+1); +} + +static void ite8709_write(struct ite8709_device *dev, unsigned char port, + unsigned char data) +{ + outb(port, dev->io); + outb(data, dev->io+1); +} + +static void ite8709_wait_device(struct ite8709_device *dev) +{ + int i = 0; + /* + * loop until device tells it's ready to continue + * iterations count is usually ~750 but can sometimes achieve 13000 + */ + for (i = 0; i < 15000; i++) { + udelay(2); + if (ite8709_read(dev, ITE8709_MODE) == ITE8709_MODE_READY) + break; + } +} + +static void ite8709_write_register(struct ite8709_device *dev, + unsigned char reg_adr, unsigned char reg_value) +{ + ite8709_wait_device(dev); + + ite8709_write(dev, ITE8709_REG_VAL, reg_value); + ite8709_write(dev, ITE8709_REG_ADR, reg_adr); + ite8709_write(dev, ITE8709_MODE, ITE8709_MODE_WRITE); +} + +static void ite8709_init_hardware(struct ite8709_device *dev) +{ + spin_lock_irq(&dev->hardware_lock); + dev->device_busy = 1; + spin_unlock_irq(&dev->hardware_lock); + + ite8709_write_register(dev, IT8512_REG_BDHR, (CFG_BDR >> 8) & 0xff); + ite8709_write_register(dev, IT8512_REG_BDLR, CFG_BDR & 0xff); + ite8709_write_register(dev, IT8512_REG_CFR, CFG_CR_FREQ); + ite8709_write_register(dev, IT8512_REG_IER, + IT8512_IER_IEC | IT8512_IER_RFOIE | IT8512_IER_RDAIE); + ite8709_write_register(dev, IT8512_REG_RCR, CFG_DCR); + ite8709_write_register(dev, IT8512_REG_MSTCR, + CFG_FIFOTL | IT8512_MSTCR_FIFOCLR); + ite8709_write_register(dev, IT8512_REG_RCR, + IT8512_RCR_RXEN | IT8512_RCR_RXACT | CFG_DCR); + + spin_lock_irq(&dev->hardware_lock); + dev->device_busy = 0; + spin_unlock_irq(&dev->hardware_lock); + + tasklet_enable(&dev->tasklet); +} + +static void ite8709_drop_hardware(struct ite8709_device *dev) +{ + tasklet_disable(&dev->tasklet); + + spin_lock_irq(&dev->hardware_lock); + dev->device_busy = 1; + spin_unlock_irq(&dev->hardware_lock); + + ite8709_write_register(dev, IT8512_REG_RCR, 0); + ite8709_write_register(dev, IT8512_REG_MSTCR, + IT8512_MSTCR_RESET | IT8512_MSTCR_FIFOCLR); + + spin_lock_irq(&dev->hardware_lock); + dev->device_busy = 0; + spin_unlock_irq(&dev->hardware_lock); +} + +static int ite8709_set_use_inc(void *data) +{ + struct ite8709_device *dev; + dev = data; + if (dev->use_count == 0) + ite8709_init_hardware(dev); + dev->use_count++; + return 0; +} + +static void ite8709_set_use_dec(void *data) +{ + struct ite8709_device *dev; + dev = data; + dev->use_count--; + if (dev->use_count == 0) + ite8709_drop_hardware(dev); +} + +static void ite8709_add_read_queue(struct ite8709_device *dev, int flag, + unsigned long long val) +{ + int value; + + dprintk("add a %llu usec %s\n", val, flag ? "pulse" : "space"); + + value = (val > PULSE_MASK) ? PULSE_MASK : val; + if (flag) + value |= PULSE_BIT; + + if (!lirc_buffer_full(dev->driver.rbuf)) { + lirc_buffer_write(dev->driver.rbuf, (void *) &value); + wake_up(&dev->driver.rbuf->wait_poll); + } +} + +static irqreturn_t ite8709_interrupt(int irq, void *dev_id) +{ + unsigned char data; + int iir, rfsr, i; + int fifo = 0; + char bit; + struct timeval curr_tv; + + /* Bit duration in microseconds */ + const unsigned long bit_duration = 1000000ul / (115200 / CFG_BDR); + + struct ite8709_device *dev; + dev = dev_id; + + /* + * If device is busy, we simply discard data because we are in one of + * these two cases : shutting down or rearming the device, so this + * doesn't really matter and this avoids waiting too long in IRQ ctx + */ + spin_lock(&dev->hardware_lock); + if (dev->device_busy) { + spin_unlock(&dev->hardware_lock); + return IRQ_RETVAL(IRQ_HANDLED); + } + + iir = ite8709_read(dev, ITE8709_IIR); + + switch (iir) { + case ITE8709_IIR_RFOI: + dprintk("fifo overrun, scheduling forced rearm just in case\n"); + dev->force_rearm = 1; + tasklet_schedule(&dev->tasklet); + spin_unlock(&dev->hardware_lock); + return IRQ_RETVAL(IRQ_HANDLED); + + case ITE8709_IIR_RDAI: + rfsr = ite8709_read(dev, ITE8709_RFSR); + fifo = rfsr & ITE8709_RFSR_MASK; + if (fifo > 32) + fifo = 32; + dprintk("iir: 0x%x rfsr: 0x%x fifo: %d\n", iir, rfsr, fifo); + + if (dev->rearmed) { + do_gettimeofday(&curr_tv); + dev->acc_space += 1000000ull + * (curr_tv.tv_sec - dev->last_tv.tv_sec) + + (curr_tv.tv_usec - dev->last_tv.tv_usec); + dev->rearmed = 0; + } + for (i = 0; i < fifo; i++) { + data = ite8709_read(dev, i+ITE8709_FIFO_START); + data = ~data; + /* Loop through */ + for (bit = 0; bit < 8; ++bit) { + if ((data >> bit) & 1) { + dev->acc_pulse += bit_duration; + if (dev->lastbit == 0) { + ite8709_add_read_queue(dev, 0, + dev->acc_space); + dev->acc_space = 0; + } + } else { + dev->acc_space += bit_duration; + if (dev->lastbit == 1) { + ite8709_add_read_queue(dev, 1, + dev->acc_pulse); + dev->acc_pulse = 0; + } + } + dev->lastbit = (data >> bit) & 1; + } + } + ite8709_write(dev, ITE8709_RFSR, 0); + + if (dev->acc_space > CFG_TIMEOUT) { + dprintk("scheduling rearm IRQ\n"); + do_gettimeofday(&dev->last_tv); + dev->force_rearm = 0; + tasklet_schedule(&dev->tasklet); + } + + spin_unlock(&dev->hardware_lock); + return IRQ_RETVAL(IRQ_HANDLED); + + default: + /* not our irq */ + dprintk("unknown IRQ (shouldn't happen) !!\n"); + spin_unlock(&dev->hardware_lock); + return IRQ_RETVAL(IRQ_NONE); + } +} + +static void ite8709_rearm_irq(unsigned long data) +{ + struct ite8709_device *dev; + unsigned long flags; + dev = (struct ite8709_device *) data; + + spin_lock_irqsave(&dev->hardware_lock, flags); + dev->device_busy = 1; + spin_unlock_irqrestore(&dev->hardware_lock, flags); + + if (dev->force_rearm || dev->acc_space > CFG_TIMEOUT) { + dprintk("rearming IRQ\n"); + ite8709_write_register(dev, IT8512_REG_RCR, + IT8512_RCR_RXACT | CFG_DCR); + ite8709_write_register(dev, IT8512_REG_MSTCR, + CFG_FIFOTL | IT8512_MSTCR_FIFOCLR); + ite8709_write_register(dev, IT8512_REG_RCR, + IT8512_RCR_RXEN | IT8512_RCR_RXACT | CFG_DCR); + if (!dev->force_rearm) + dev->rearmed = 1; + dev->force_rearm = 0; + } + + spin_lock_irqsave(&dev->hardware_lock, flags); + dev->device_busy = 0; + spin_unlock_irqrestore(&dev->hardware_lock, flags); +} + +static int ite8709_cleanup(struct ite8709_device *dev, int stage, int errno, + char *msg) +{ + if (msg != NULL) + printk(KERN_ERR LIRC_DRIVER_NAME ": %s\n", msg); + + switch (stage) { + case 6: + if (dev->use_count > 0) + ite8709_drop_hardware(dev); + case 5: + free_irq(dev->irq, dev); + case 4: + release_region(dev->io, 2); + case 3: + lirc_unregister_driver(dev->driver.minor); + case 2: + lirc_buffer_free(dev->driver.rbuf); + kfree(dev->driver.rbuf); + case 1: + kfree(dev); + case 0: + ; + } + + return errno; +} + +static int __devinit ite8709_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) +{ + struct lirc_driver *driver; + struct ite8709_device *ite8709_dev; + int ret; + + /* Check resources validity */ + if (!pnp_irq_valid(dev, 0)) + return ite8709_cleanup(NULL, 0, -ENODEV, "invalid IRQ"); + if (!pnp_port_valid(dev, 2)) + return ite8709_cleanup(NULL, 0, -ENODEV, "invalid IO port"); + + /* Allocate memory for device struct */ + ite8709_dev = kzalloc(sizeof(struct ite8709_device), GFP_KERNEL); + if (ite8709_dev == NULL) + return ite8709_cleanup(NULL, 0, -ENOMEM, "kzalloc failed"); + pnp_set_drvdata(dev, ite8709_dev); + + /* Initialize device struct */ + ite8709_dev->use_count = 0; + ite8709_dev->irq = pnp_irq(dev, 0); + ite8709_dev->io = pnp_port_start(dev, 2); + ite8709_dev->hardware_lock = + __SPIN_LOCK_UNLOCKED(ite8709_dev->hardware_lock); + ite8709_dev->acc_pulse = 0; + ite8709_dev->acc_space = 0; + ite8709_dev->lastbit = 0; + do_gettimeofday(&ite8709_dev->last_tv); + tasklet_init(&ite8709_dev->tasklet, ite8709_rearm_irq, + (long) ite8709_dev); + ite8709_dev->force_rearm = 0; + ite8709_dev->rearmed = 0; + ite8709_dev->device_busy = 0; + + /* Initialize driver struct */ + driver = &ite8709_dev->driver; + strcpy(driver->name, LIRC_DRIVER_NAME); + driver->minor = -1; + driver->code_length = sizeof(int) * 8; + driver->sample_rate = 0; + driver->features = LIRC_CAN_REC_MODE2; + driver->data = ite8709_dev; + driver->add_to_buf = NULL; + driver->set_use_inc = ite8709_set_use_inc; + driver->set_use_dec = ite8709_set_use_dec; + driver->dev = &dev->dev; + driver->owner = THIS_MODULE; + + /* Initialize LIRC buffer */ + driver->rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL); + if (!driver->rbuf) + return ite8709_cleanup(ite8709_dev, 1, -ENOMEM, + "can't allocate lirc_buffer"); + if (lirc_buffer_init(driver->rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) + return ite8709_cleanup(ite8709_dev, 1, -ENOMEM, + "lirc_buffer_init() failed"); + + /* Register LIRC driver */ + ret = lirc_register_driver(driver); + if (ret < 0) + return ite8709_cleanup(ite8709_dev, 2, ret, + "lirc_register_driver() failed"); + + /* Reserve I/O port access */ + if (!request_region(ite8709_dev->io, 2, LIRC_DRIVER_NAME)) + return ite8709_cleanup(ite8709_dev, 3, -EBUSY, + "i/o port already in use"); + + /* Reserve IRQ line */ + ret = request_irq(ite8709_dev->irq, ite8709_interrupt, 0, + LIRC_DRIVER_NAME, ite8709_dev); + if (ret < 0) + return ite8709_cleanup(ite8709_dev, 4, ret, + "IRQ already in use"); + + /* Initialize hardware */ + ite8709_drop_hardware(ite8709_dev); /* Shutdown hw until first use */ + + printk(KERN_INFO LIRC_DRIVER_NAME ": device found : irq=%d io=0x%x\n", + ite8709_dev->irq, ite8709_dev->io); + + return 0; +} + +static void __devexit ite8709_pnp_remove(struct pnp_dev *dev) +{ + struct ite8709_device *ite8709_dev; + ite8709_dev = pnp_get_drvdata(dev); + + ite8709_cleanup(ite8709_dev, 6, 0, NULL); + + printk(KERN_INFO LIRC_DRIVER_NAME ": device removed\n"); +} + +#ifdef CONFIG_PM +static int ite8709_pnp_suspend(struct pnp_dev *dev, pm_message_t state) +{ + struct ite8709_device *ite8709_dev; + ite8709_dev = pnp_get_drvdata(dev); + + if (ite8709_dev->use_count > 0) + ite8709_drop_hardware(ite8709_dev); + + return 0; +} + +static int ite8709_pnp_resume(struct pnp_dev *dev) +{ + struct ite8709_device *ite8709_dev; + ite8709_dev = pnp_get_drvdata(dev); + + if (ite8709_dev->use_count > 0) + ite8709_init_hardware(ite8709_dev); + + return 0; +} +#else +#define ite8709_pnp_suspend NULL +#define ite8709_pnp_resume NULL +#endif + +static const struct pnp_device_id pnp_dev_table[] = { + {"ITE8709", 0}, + {} +}; + +MODULE_DEVICE_TABLE(pnp, pnp_dev_table); + +static struct pnp_driver ite8709_pnp_driver = { + .name = LIRC_DRIVER_NAME, + .probe = ite8709_pnp_probe, + .remove = __devexit_p(ite8709_pnp_remove), + .suspend = ite8709_pnp_suspend, + .resume = ite8709_pnp_resume, + .id_table = pnp_dev_table, +}; + +static int __init ite8709_init_module(void) +{ + return pnp_register_driver(&ite8709_pnp_driver); +} +module_init(ite8709_init_module); + +static void __exit ite8709_cleanup_module(void) +{ + pnp_unregister_driver(&ite8709_pnp_driver); +} +module_exit(ite8709_cleanup_module); + +MODULE_DESCRIPTION("LIRC driver for ITE8709 CIR port"); +MODULE_AUTHOR("Grégory Lardière"); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging messages"); diff --git a/drivers/staging/lirc/lirc_parallel.c b/drivers/staging/lirc/lirc_parallel.c new file mode 100644 index 0000000..6da4a8c --- /dev/null +++ b/drivers/staging/lirc/lirc_parallel.c @@ -0,0 +1,705 @@ +/* + * lirc_parallel.c + * + * lirc_parallel - device driver for infra-red signal receiving and + * transmitting unit built by the author + * + * Copyright (C) 1998 Christoph Bartelmus + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/*** Includes ***/ + +#ifdef CONFIG_SMP +#error "--- Sorry, this driver is not SMP safe. ---" +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "lirc_parallel.h" + +#define LIRC_DRIVER_NAME "lirc_parallel" + +#ifndef LIRC_IRQ +#define LIRC_IRQ 7 +#endif +#ifndef LIRC_PORT +#define LIRC_PORT 0x378 +#endif +#ifndef LIRC_TIMER +#define LIRC_TIMER 65536 +#endif + +/*** Global Variables ***/ + +static int debug; +static int check_pselecd; + +unsigned int irq = LIRC_IRQ; +unsigned int io = LIRC_PORT; +#ifdef LIRC_TIMER +unsigned int timer; +unsigned int default_timer = LIRC_TIMER; +#endif + +#define RBUF_SIZE (256) /* this must be a power of 2 larger than 1 */ + +static int rbuf[RBUF_SIZE]; + +DECLARE_WAIT_QUEUE_HEAD(lirc_wait); + +unsigned int rptr; +unsigned int wptr; +unsigned int lost_irqs; +int is_open; + +struct parport *pport; +struct pardevice *ppdevice; +int is_claimed; + +unsigned int tx_mask = 1; + +/*** Internal Functions ***/ + +static unsigned int in(int offset) +{ + switch (offset) { + case LIRC_LP_BASE: + return parport_read_data(pport); + case LIRC_LP_STATUS: + return parport_read_status(pport); + case LIRC_LP_CONTROL: + return parport_read_control(pport); + } + return 0; /* make compiler happy */ +} + +static void out(int offset, int value) +{ + switch (offset) { + case LIRC_LP_BASE: + parport_write_data(pport, value); + break; + case LIRC_LP_CONTROL: + parport_write_control(pport, value); + break; + case LIRC_LP_STATUS: + printk(KERN_INFO "%s: attempt to write to status register\n", + LIRC_DRIVER_NAME); + break; + } +} + +static unsigned int lirc_get_timer(void) +{ + return in(LIRC_PORT_TIMER) & LIRC_PORT_TIMER_BIT; +} + +static unsigned int lirc_get_signal(void) +{ + return in(LIRC_PORT_SIGNAL) & LIRC_PORT_SIGNAL_BIT; +} + +static void lirc_on(void) +{ + out(LIRC_PORT_DATA, tx_mask); +} + +static void lirc_off(void) +{ + out(LIRC_PORT_DATA, 0); +} + +static unsigned int init_lirc_timer(void) +{ + struct timeval tv, now; + unsigned int level, newlevel, timeelapsed, newtimer; + int count = 0; + + do_gettimeofday(&tv); + tv.tv_sec++; /* wait max. 1 sec. */ + level = lirc_get_timer(); + do { + newlevel = lirc_get_timer(); + if (level == 0 && newlevel != 0) + count++; + level = newlevel; + do_gettimeofday(&now); + } while (count < 1000 && (now.tv_sec < tv.tv_sec + || (now.tv_sec == tv.tv_sec + && now.tv_usec < tv.tv_usec))); + + timeelapsed = ((now.tv_sec + 1 - tv.tv_sec)*1000000 + + (now.tv_usec - tv.tv_usec)); + if (count >= 1000 && timeelapsed > 0) { + if (default_timer == 0) { + /* autodetect timer */ + newtimer = (1000000*count)/timeelapsed; + printk(KERN_INFO "%s: %u Hz timer detected\n", + LIRC_DRIVER_NAME, newtimer); + return newtimer; + } else { + newtimer = (1000000*count)/timeelapsed; + if (abs(newtimer - default_timer) > default_timer/10) { + /* bad timer */ + printk(KERN_NOTICE "%s: bad timer: %u Hz\n", + LIRC_DRIVER_NAME, newtimer); + printk(KERN_NOTICE "%s: using default timer: " + "%u Hz\n", + LIRC_DRIVER_NAME, default_timer); + return default_timer; + } else { + printk(KERN_INFO "%s: %u Hz timer detected\n", + LIRC_DRIVER_NAME, newtimer); + return newtimer; /* use detected value */ + } + } + } else { + printk(KERN_NOTICE "%s: no timer detected\n", LIRC_DRIVER_NAME); + return 0; + } +} + +static int lirc_claim(void) +{ + if (parport_claim(ppdevice) != 0) { + printk(KERN_WARNING "%s: could not claim port\n", + LIRC_DRIVER_NAME); + printk(KERN_WARNING "%s: waiting for port becoming available" + "\n", LIRC_DRIVER_NAME); + if (parport_claim_or_block(ppdevice) < 0) { + printk(KERN_NOTICE "%s: could not claim port, giving" + " up\n", LIRC_DRIVER_NAME); + return 0; + } + } + out(LIRC_LP_CONTROL, LP_PSELECP|LP_PINITP); + is_claimed = 1; + return 1; +} + +/*** interrupt handler ***/ + +static void rbuf_write(int signal) +{ + unsigned int nwptr; + + nwptr = (wptr + 1) & (RBUF_SIZE - 1); + if (nwptr == rptr) { + /* no new signals will be accepted */ + lost_irqs++; + printk(KERN_NOTICE "%s: buffer overrun\n", LIRC_DRIVER_NAME); + return; + } + rbuf[wptr] = signal; + wptr = nwptr; +} + +static void irq_handler(void *blah) +{ + struct timeval tv; + static struct timeval lasttv; + static int init; + long signal; + int data; + unsigned int level, newlevel; + unsigned int timeout; + + if (!is_open) + return; + + if (!is_claimed) + return; + +#if 0 + /* disable interrupt */ + disable_irq(irq); + out(LIRC_PORT_IRQ, in(LIRC_PORT_IRQ) & (~LP_PINTEN)); +#endif + if (check_pselecd && (in(1) & LP_PSELECD)) + return; + +#ifdef LIRC_TIMER + if (init) { + do_gettimeofday(&tv); + + signal = tv.tv_sec - lasttv.tv_sec; + if (signal > 15) + /* really long time */ + data = PULSE_MASK; + else + data = (int) (signal*1000000 + + tv.tv_usec - lasttv.tv_usec + + LIRC_SFH506_DELAY); + + rbuf_write(data); /* space */ + } else { + if (timer == 0) { + /* + * wake up; we'll lose this signal, but it will be + * garbage if the device is turned on anyway + */ + timer = init_lirc_timer(); + /* enable_irq(irq); */ + return; + } + init = 1; + } + + timeout = timer/10; /* timeout after 1/10 sec. */ + signal = 1; + level = lirc_get_timer(); + do { + newlevel = lirc_get_timer(); + if (level == 0 && newlevel != 0) + signal++; + level = newlevel; + + /* giving up */ + if (signal > timeout + || (check_pselecd && (in(1) & LP_PSELECD))) { + signal = 0; + printk(KERN_NOTICE "%s: timeout\n", LIRC_DRIVER_NAME); + break; + } + } while (lirc_get_signal()); + + if (signal != 0) { + /* ajust value to usecs */ + unsigned long long helper; + + helper = ((unsigned long long) signal)*1000000; + do_div(helper, timer); + signal = (long) helper; + + if (signal > LIRC_SFH506_DELAY) + data = signal - LIRC_SFH506_DELAY; + else + data = 1; + rbuf_write(PULSE_BIT|data); /* pulse */ + } + do_gettimeofday(&lasttv); +#else + /* add your code here */ +#endif + + wake_up_interruptible(&lirc_wait); + + /* enable interrupt */ + /* + enable_irq(irq); + out(LIRC_PORT_IRQ, in(LIRC_PORT_IRQ)|LP_PINTEN); + */ +} + +/*** file operations ***/ + +static loff_t lirc_lseek(struct file *filep, loff_t offset, int orig) +{ + return -ESPIPE; +} + +static ssize_t lirc_read(struct file *filep, char *buf, size_t n, loff_t *ppos) +{ + int result = 0; + int count = 0; + DECLARE_WAITQUEUE(wait, current); + + if (n % sizeof(int)) + return -EINVAL; + + add_wait_queue(&lirc_wait, &wait); + set_current_state(TASK_INTERRUPTIBLE); + while (count < n) { + if (rptr != wptr) { + if (copy_to_user(buf+count, (char *) &rbuf[rptr], + sizeof(int))) { + result = -EFAULT; + break; + } + rptr = (rptr + 1) & (RBUF_SIZE - 1); + count += sizeof(int); + } else { + if (filep->f_flags & O_NONBLOCK) { + result = -EAGAIN; + break; + } + if (signal_pending(current)) { + result = -ERESTARTSYS; + break; + } + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + } + } + remove_wait_queue(&lirc_wait, &wait); + set_current_state(TASK_RUNNING); + return count ? count : result; +} + +static ssize_t lirc_write(struct file *filep, const char *buf, size_t n, + loff_t *ppos) +{ + int count; + unsigned int i; + unsigned int level, newlevel; + unsigned long flags; + int counttimer; + int *wbuf; + + if (!is_claimed) + return -EBUSY; + + count = n / sizeof(int); + + if (n % sizeof(int) || count % 2 == 0) + return -EINVAL; + + wbuf = memdup_user(buf, n); + if (IS_ERR(wbuf)) + return PTR_ERR(wbuf); + +#ifdef LIRC_TIMER + if (timer == 0) { + /* try again if device is ready */ + timer = init_lirc_timer(); + if (timer == 0) + return -EIO; + } + + /* adjust values from usecs */ + for (i = 0; i < count; i++) { + unsigned long long helper; + + helper = ((unsigned long long) wbuf[i])*timer; + do_div(helper, 1000000); + wbuf[i] = (int) helper; + } + + local_irq_save(flags); + i = 0; + while (i < count) { + level = lirc_get_timer(); + counttimer = 0; + lirc_on(); + do { + newlevel = lirc_get_timer(); + if (level == 0 && newlevel != 0) + counttimer++; + level = newlevel; + if (check_pselecd && (in(1) & LP_PSELECD)) { + lirc_off(); + local_irq_restore(flags); + return -EIO; + } + } while (counttimer < wbuf[i]); + i++; + + lirc_off(); + if (i == count) + break; + counttimer = 0; + do { + newlevel = lirc_get_timer(); + if (level == 0 && newlevel != 0) + counttimer++; + level = newlevel; + if (check_pselecd && (in(1) & LP_PSELECD)) { + local_irq_restore(flags); + return -EIO; + } + } while (counttimer < wbuf[i]); + i++; + } + local_irq_restore(flags); +#else + /* place code that handles write without external timer here */ +#endif + return n; +} + +static unsigned int lirc_poll(struct file *file, poll_table *wait) +{ + poll_wait(file, &lirc_wait, wait); + if (rptr != wptr) + return POLLIN | POLLRDNORM; + return 0; +} + +static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) +{ + int result; + unsigned long features = LIRC_CAN_SET_TRANSMITTER_MASK | + LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2; + unsigned long mode; + unsigned int ivalue; + + switch (cmd) { + case LIRC_GET_FEATURES: + result = put_user(features, (unsigned long *) arg); + if (result) + return result; + break; + case LIRC_GET_SEND_MODE: + result = put_user(LIRC_MODE_PULSE, (unsigned long *) arg); + if (result) + return result; + break; + case LIRC_GET_REC_MODE: + result = put_user(LIRC_MODE_MODE2, (unsigned long *) arg); + if (result) + return result; + break; + case LIRC_SET_SEND_MODE: + result = get_user(mode, (unsigned long *) arg); + if (result) + return result; + if (mode != LIRC_MODE_PULSE) + return -EINVAL; + break; + case LIRC_SET_REC_MODE: + result = get_user(mode, (unsigned long *) arg); + if (result) + return result; + if (mode != LIRC_MODE_MODE2) + return -ENOSYS; + break; + case LIRC_SET_TRANSMITTER_MASK: + result = get_user(ivalue, (unsigned int *) arg); + if (result) + return result; + if ((ivalue & LIRC_PARALLEL_TRANSMITTER_MASK) != ivalue) + return LIRC_PARALLEL_MAX_TRANSMITTERS; + tx_mask = ivalue; + break; + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int lirc_open(struct inode *node, struct file *filep) +{ + if (is_open || !lirc_claim()) + return -EBUSY; + + parport_enable_irq(pport); + + /* init read ptr */ + rptr = 0; + wptr = 0; + lost_irqs = 0; + + is_open = 1; + return 0; +} + +static int lirc_close(struct inode *node, struct file *filep) +{ + if (is_claimed) { + is_claimed = 0; + parport_release(ppdevice); + } + is_open = 0; + return 0; +} + +static const struct file_operations lirc_fops = { + .owner = THIS_MODULE, + .llseek = lirc_lseek, + .read = lirc_read, + .write = lirc_write, + .poll = lirc_poll, + .unlocked_ioctl = lirc_ioctl, + .open = lirc_open, + .release = lirc_close +}; + +static int set_use_inc(void *data) +{ + return 0; +} + +static void set_use_dec(void *data) +{ +} + +static struct lirc_driver driver = { + .name = LIRC_DRIVER_NAME, + .minor = -1, + .code_length = 1, + .sample_rate = 0, + .data = NULL, + .add_to_buf = NULL, + .set_use_inc = set_use_inc, + .set_use_dec = set_use_dec, + .fops = &lirc_fops, + .dev = NULL, + .owner = THIS_MODULE, +}; + +static int pf(void *handle); +static void kf(void *handle); + +static struct timer_list poll_timer; +static void poll_state(unsigned long ignored); + +static void poll_state(unsigned long ignored) +{ + printk(KERN_NOTICE "%s: time\n", + LIRC_DRIVER_NAME); + del_timer(&poll_timer); + if (is_claimed) + return; + kf(NULL); + if (!is_claimed) { + printk(KERN_NOTICE "%s: could not claim port, giving up\n", + LIRC_DRIVER_NAME); + init_timer(&poll_timer); + poll_timer.expires = jiffies + HZ; + poll_timer.data = (unsigned long)current; + poll_timer.function = poll_state; + add_timer(&poll_timer); + } +} + +static int pf(void *handle) +{ + parport_disable_irq(pport); + is_claimed = 0; + return 0; +} + +static void kf(void *handle) +{ + if (!is_open) + return; + if (!lirc_claim()) + return; + parport_enable_irq(pport); + lirc_off(); + /* this is a bit annoying when you actually print...*/ + /* + printk(KERN_INFO "%s: reclaimed port\n", LIRC_DRIVER_NAME); + */ +} + +/*** module initialization and cleanup ***/ + +static int __init lirc_parallel_init(void) +{ + pport = parport_find_base(io); + if (pport == NULL) { + printk(KERN_NOTICE "%s: no port at %x found\n", + LIRC_DRIVER_NAME, io); + return -ENXIO; + } + ppdevice = parport_register_device(pport, LIRC_DRIVER_NAME, + pf, kf, irq_handler, 0, NULL); + parport_put_port(pport); + if (ppdevice == NULL) { + printk(KERN_NOTICE "%s: parport_register_device() failed\n", + LIRC_DRIVER_NAME); + return -ENXIO; + } + if (parport_claim(ppdevice) != 0) + goto skip_init; + is_claimed = 1; + out(LIRC_LP_CONTROL, LP_PSELECP|LP_PINITP); + +#ifdef LIRC_TIMER + if (debug) + out(LIRC_PORT_DATA, tx_mask); + + timer = init_lirc_timer(); + +#if 0 /* continue even if device is offline */ + if (timer == 0) { + is_claimed = 0; + parport_release(pport); + parport_unregister_device(ppdevice); + return -EIO; + } + +#endif + if (debug) + out(LIRC_PORT_DATA, 0); +#endif + + is_claimed = 0; + parport_release(ppdevice); + skip_init: + driver.minor = lirc_register_driver(&driver); + if (driver.minor < 0) { + printk(KERN_NOTICE "%s: register_chrdev() failed\n", + LIRC_DRIVER_NAME); + parport_unregister_device(ppdevice); + return -EIO; + } + printk(KERN_INFO "%s: installed using port 0x%04x irq %d\n", + LIRC_DRIVER_NAME, io, irq); + return 0; +} + +static void __exit lirc_parallel_exit(void) +{ + parport_unregister_device(ppdevice); + lirc_unregister_driver(driver.minor); +} + +module_init(lirc_parallel_init); +module_exit(lirc_parallel_exit); + +MODULE_DESCRIPTION("Infrared receiver driver for parallel ports."); +MODULE_AUTHOR("Christoph Bartelmus"); +MODULE_LICENSE("GPL"); + +module_param(io, int, S_IRUGO); +MODULE_PARM_DESC(io, "I/O address base (0x3bc, 0x378 or 0x278)"); + +module_param(irq, int, S_IRUGO); +MODULE_PARM_DESC(irq, "Interrupt (7 or 5)"); + +module_param(tx_mask, int, S_IRUGO); +MODULE_PARM_DESC(tx_maxk, "Transmitter mask (default: 0x01)"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging messages"); + +module_param(check_pselecd, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Check for printer (default: 0)"); diff --git a/drivers/staging/lirc/lirc_parallel.h b/drivers/staging/lirc/lirc_parallel.h new file mode 100644 index 0000000..4bed6af --- /dev/null +++ b/drivers/staging/lirc/lirc_parallel.h @@ -0,0 +1,26 @@ +/* lirc_parallel.h */ + +#ifndef _LIRC_PARALLEL_H +#define _LIRC_PARALLEL_H + +#include + +#define LIRC_PORT_LEN 3 + +#define LIRC_LP_BASE 0 +#define LIRC_LP_STATUS 1 +#define LIRC_LP_CONTROL 2 + +#define LIRC_PORT_DATA LIRC_LP_BASE /* base */ +#define LIRC_PORT_TIMER LIRC_LP_STATUS /* status port */ +#define LIRC_PORT_TIMER_BIT LP_PBUSY /* busy signal */ +#define LIRC_PORT_SIGNAL LIRC_LP_STATUS /* status port */ +#define LIRC_PORT_SIGNAL_BIT LP_PACK /* ack signal */ +#define LIRC_PORT_IRQ LIRC_LP_CONTROL /* control port */ + +#define LIRC_SFH506_DELAY 0 /* delay t_phl in usecs */ + +#define LIRC_PARALLEL_MAX_TRANSMITTERS 8 +#define LIRC_PARALLEL_TRANSMITTER_MASK ((1< + * Tim Davies + * + * This driver was derived from: + * Venky Raju + * "lirc_imon - "LIRC/VFD driver for Ahanix/Soundgraph IMON IR/VFD" + * Paul Miller 's 2003-2004 + * "lirc_atiusb - USB remote support for LIRC" + * Culver Consulting Services 's 2003 + * "Sasem OnAir VFD/IR USB driver" + * + * + * NOTE - The LCDproc iMon driver should work with this module. More info at + * http://www.frogstorm.info/sasem + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + + +#define MOD_AUTHOR "Oliver Stabel , " \ + "Tim Davies " +#define MOD_DESC "USB Driver for Sasem Remote Controller V1.1" +#define MOD_NAME "lirc_sasem" +#define MOD_VERSION "0.5" + +#define VFD_MINOR_BASE 144 /* Same as LCD */ +#define DEVICE_NAME "lcd%d" + +#define BUF_CHUNK_SIZE 8 +#define BUF_SIZE 128 + +#define IOCTL_LCD_CONTRAST 1 + +/*** P R O T O T Y P E S ***/ + +/* USB Callback prototypes */ +static int sasem_probe(struct usb_interface *interface, + const struct usb_device_id *id); +static void sasem_disconnect(struct usb_interface *interface); +static void usb_rx_callback(struct urb *urb); +static void usb_tx_callback(struct urb *urb); + +/* VFD file_operations function prototypes */ +static int vfd_open(struct inode *inode, struct file *file); +static long vfd_ioctl(struct file *file, unsigned cmd, unsigned long arg); +static int vfd_close(struct inode *inode, struct file *file); +static ssize_t vfd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos); + +/* LIRC driver function prototypes */ +static int ir_open(void *data); +static void ir_close(void *data); + +/* Driver init/exit prototypes */ +static int __init sasem_init(void); +static void __exit sasem_exit(void); + +/*** G L O B A L S ***/ +#define SASEM_DATA_BUF_SZ 32 + +struct sasem_context { + + struct usb_device *dev; + int vfd_isopen; /* VFD port has been opened */ + unsigned int vfd_contrast; /* VFD contrast */ + int ir_isopen; /* IR port has been opened */ + int dev_present; /* USB device presence */ + struct mutex ctx_lock; /* to lock this object */ + wait_queue_head_t remove_ok; /* For unexpected USB disconnects */ + + struct lirc_driver *driver; + struct usb_endpoint_descriptor *rx_endpoint; + struct usb_endpoint_descriptor *tx_endpoint; + struct urb *rx_urb; + struct urb *tx_urb; + unsigned char usb_rx_buf[8]; + unsigned char usb_tx_buf[8]; + + struct tx_t { + unsigned char data_buf[SASEM_DATA_BUF_SZ]; /* user data buffer */ + struct completion finished; /* wait for write to finish */ + atomic_t busy; /* write in progress */ + int status; /* status of tx completion */ + } tx; + + /* for dealing with repeat codes (wish there was a toggle bit!) */ + struct timeval presstime; + char lastcode[8]; + int codesaved; +}; + +/* VFD file operations */ +static const struct file_operations vfd_fops = { + .owner = THIS_MODULE, + .open = &vfd_open, + .write = &vfd_write, + .unlocked_ioctl = &vfd_ioctl, + .release = &vfd_close, +}; + +/* USB Device ID for Sasem USB Control Board */ +static struct usb_device_id sasem_usb_id_table[] = { + /* Sasem USB Control Board */ + { USB_DEVICE(0x11ba, 0x0101) }, + /* Terminating entry */ + {} +}; + +/* USB Device data */ +static struct usb_driver sasem_driver = { + .name = MOD_NAME, + .probe = sasem_probe, + .disconnect = sasem_disconnect, + .id_table = sasem_usb_id_table, +}; + +static struct usb_class_driver sasem_class = { + .name = DEVICE_NAME, + .fops = &vfd_fops, + .minor_base = VFD_MINOR_BASE, +}; + +/* to prevent races between open() and disconnect() */ +static DEFINE_MUTEX(disconnect_lock); + +static int debug; + + +/*** M O D U L E C O D E ***/ + +MODULE_AUTHOR(MOD_AUTHOR); +MODULE_DESCRIPTION(MOD_DESC); +MODULE_LICENSE("GPL"); +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)"); + +static void delete_context(struct sasem_context *context) +{ + usb_free_urb(context->tx_urb); /* VFD */ + usb_free_urb(context->rx_urb); /* IR */ + lirc_buffer_free(context->driver->rbuf); + kfree(context->driver->rbuf); + kfree(context->driver); + kfree(context); + + if (debug) + printk(KERN_INFO "%s: context deleted\n", __func__); +} + +static void deregister_from_lirc(struct sasem_context *context) +{ + int retval; + int minor = context->driver->minor; + + retval = lirc_unregister_driver(minor); + if (retval) + err("%s: unable to deregister from lirc (%d)", + __func__, retval); + else + printk(KERN_INFO "Deregistered Sasem driver (minor:%d)\n", + minor); + +} + +/** + * Called when the VFD device (e.g. /dev/usb/lcd) + * is opened by the application. + */ +static int vfd_open(struct inode *inode, struct file *file) +{ + struct usb_interface *interface; + struct sasem_context *context = NULL; + int subminor; + int retval = 0; + + /* prevent races with disconnect */ + mutex_lock(&disconnect_lock); + + subminor = iminor(inode); + interface = usb_find_interface(&sasem_driver, subminor); + if (!interface) { + err("%s: could not find interface for minor %d", + __func__, subminor); + retval = -ENODEV; + goto exit; + } + context = usb_get_intfdata(interface); + + if (!context) { + err("%s: no context found for minor %d", + __func__, subminor); + retval = -ENODEV; + goto exit; + } + + mutex_lock(&context->ctx_lock); + + if (context->vfd_isopen) { + err("%s: VFD port is already open", __func__); + retval = -EBUSY; + } else { + context->vfd_isopen = 1; + file->private_data = context; + printk(KERN_INFO "VFD port opened\n"); + } + + mutex_unlock(&context->ctx_lock); + +exit: + mutex_unlock(&disconnect_lock); + return retval; +} + +/** + * Called when the VFD device (e.g. /dev/usb/lcd) + * is closed by the application. + */ +static long vfd_ioctl(struct file *file, unsigned cmd, unsigned long arg) +{ + struct sasem_context *context = NULL; + + context = (struct sasem_context *) file->private_data; + + if (!context) { + err("%s: no context for device", __func__); + return -ENODEV; + } + + mutex_lock(&context->ctx_lock); + + switch (cmd) { + case IOCTL_LCD_CONTRAST: + if (arg > 1000) + arg = 1000; + context->vfd_contrast = (unsigned int)arg; + break; + default: + printk(KERN_INFO "Unknown IOCTL command\n"); + mutex_unlock(&context->ctx_lock); + return -ENOIOCTLCMD; /* not supported */ + } + + mutex_unlock(&context->ctx_lock); + return 0; +} + +/** + * Called when the VFD device (e.g. /dev/usb/lcd) + * is closed by the application. + */ +static int vfd_close(struct inode *inode, struct file *file) +{ + struct sasem_context *context = NULL; + int retval = 0; + + context = (struct sasem_context *) file->private_data; + + if (!context) { + err("%s: no context for device", __func__); + return -ENODEV; + } + + mutex_lock(&context->ctx_lock); + + if (!context->vfd_isopen) { + err("%s: VFD is not open", __func__); + retval = -EIO; + } else { + context->vfd_isopen = 0; + printk(KERN_INFO "VFD port closed\n"); + if (!context->dev_present && !context->ir_isopen) { + + /* Device disconnected before close and IR port is + * not open. If IR port is open, context will be + * deleted by ir_close. */ + mutex_unlock(&context->ctx_lock); + delete_context(context); + return retval; + } + } + + mutex_unlock(&context->ctx_lock); + return retval; +} + +/** + * Sends a packet to the VFD. + */ +static int send_packet(struct sasem_context *context) +{ + unsigned int pipe; + int interval = 0; + int retval = 0; + + pipe = usb_sndintpipe(context->dev, + context->tx_endpoint->bEndpointAddress); + interval = context->tx_endpoint->bInterval; + + usb_fill_int_urb(context->tx_urb, context->dev, pipe, + context->usb_tx_buf, sizeof(context->usb_tx_buf), + usb_tx_callback, context, interval); + + context->tx_urb->actual_length = 0; + + init_completion(&context->tx.finished); + atomic_set(&(context->tx.busy), 1); + + retval = usb_submit_urb(context->tx_urb, GFP_KERNEL); + if (retval) { + atomic_set(&(context->tx.busy), 0); + err("%s: error submitting urb (%d)", __func__, retval); + } else { + /* Wait for transmission to complete (or abort) */ + mutex_unlock(&context->ctx_lock); + wait_for_completion(&context->tx.finished); + mutex_lock(&context->ctx_lock); + + retval = context->tx.status; + if (retval) + err("%s: packet tx failed (%d)", __func__, retval); + } + + return retval; +} + +/** + * Writes data to the VFD. The Sasem VFD is 2x16 characters + * and requires data in 9 consecutive USB interrupt packets, + * each packet carrying 8 bytes. + */ +static ssize_t vfd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos) +{ + int i; + int retval = 0; + struct sasem_context *context; + int *data_buf; + + context = (struct sasem_context *) file->private_data; + if (!context) { + err("%s: no context for device", __func__); + return -ENODEV; + } + + mutex_lock(&context->ctx_lock); + + if (!context->dev_present) { + err("%s: no Sasem device present", __func__); + retval = -ENODEV; + goto exit; + } + + if (n_bytes <= 0 || n_bytes > SASEM_DATA_BUF_SZ) { + err("%s: invalid payload size", __func__); + retval = -EINVAL; + goto exit; + } + + data_buf = memdup_user(buf, n_bytes); + if (PTR_ERR(data_buf)) + return PTR_ERR(data_buf); + + memcpy(context->tx.data_buf, data_buf, n_bytes); + + /* Pad with spaces */ + for (i = n_bytes; i < SASEM_DATA_BUF_SZ; ++i) + context->tx.data_buf[i] = ' '; + + /* Nine 8 byte packets to be sent */ + /* NOTE: "\x07\x01\0\0\0\0\0\0" or "\x0c\0\0\0\0\0\0\0" + * will clear the VFD */ + for (i = 0; i < 9; i++) { + switch (i) { + case 0: + memcpy(context->usb_tx_buf, "\x07\0\0\0\0\0\0\0", 8); + context->usb_tx_buf[1] = (context->vfd_contrast) ? + (0x2B - (context->vfd_contrast - 1) / 250) + : 0x2B; + break; + case 1: + memcpy(context->usb_tx_buf, "\x09\x01\0\0\0\0\0\0", 8); + break; + case 2: + memcpy(context->usb_tx_buf, "\x0b\x01\0\0\0\0\0\0", 8); + break; + case 3: + memcpy(context->usb_tx_buf, context->tx.data_buf, 8); + break; + case 4: + memcpy(context->usb_tx_buf, + context->tx.data_buf + 8, 8); + break; + case 5: + memcpy(context->usb_tx_buf, "\x09\x01\0\0\0\0\0\0", 8); + break; + case 6: + memcpy(context->usb_tx_buf, "\x0b\x02\0\0\0\0\0\0", 8); + break; + case 7: + memcpy(context->usb_tx_buf, + context->tx.data_buf + 16, 8); + break; + case 8: + memcpy(context->usb_tx_buf, + context->tx.data_buf + 24, 8); + break; + } + retval = send_packet(context); + if (retval) { + + err("%s: send packet failed for packet #%d", + __func__, i); + goto exit; + } + } +exit: + + mutex_unlock(&context->ctx_lock); + + return (!retval) ? n_bytes : retval; +} + +/** + * Callback function for USB core API: transmit data + */ +static void usb_tx_callback(struct urb *urb) +{ + struct sasem_context *context; + + if (!urb) + return; + context = (struct sasem_context *) urb->context; + if (!context) + return; + + context->tx.status = urb->status; + + /* notify waiters that write has finished */ + atomic_set(&context->tx.busy, 0); + complete(&context->tx.finished); + + return; +} + +/** + * Called by lirc_dev when the application opens /dev/lirc + */ +static int ir_open(void *data) +{ + int retval = 0; + struct sasem_context *context; + + /* prevent races with disconnect */ + mutex_lock(&disconnect_lock); + + context = (struct sasem_context *) data; + + mutex_lock(&context->ctx_lock); + + if (context->ir_isopen) { + err("%s: IR port is already open", __func__); + retval = -EBUSY; + goto exit; + } + + usb_fill_int_urb(context->rx_urb, context->dev, + usb_rcvintpipe(context->dev, + context->rx_endpoint->bEndpointAddress), + context->usb_rx_buf, sizeof(context->usb_rx_buf), + usb_rx_callback, context, context->rx_endpoint->bInterval); + + retval = usb_submit_urb(context->rx_urb, GFP_KERNEL); + + if (retval) + err("%s: usb_submit_urb failed for ir_open (%d)", + __func__, retval); + else { + context->ir_isopen = 1; + printk(KERN_INFO "IR port opened\n"); + } + +exit: + mutex_unlock(&context->ctx_lock); + + mutex_unlock(&disconnect_lock); + return 0; +} + +/** + * Called by lirc_dev when the application closes /dev/lirc + */ +static void ir_close(void *data) +{ + struct sasem_context *context; + + context = (struct sasem_context *)data; + if (!context) { + err("%s: no context for device", __func__); + return; + } + + mutex_lock(&context->ctx_lock); + + usb_kill_urb(context->rx_urb); + context->ir_isopen = 0; + printk(KERN_INFO "IR port closed\n"); + + if (!context->dev_present) { + + /* + * Device disconnected while IR port was + * still open. Driver was not deregistered + * at disconnect time, so do it now. + */ + deregister_from_lirc(context); + + if (!context->vfd_isopen) { + + mutex_unlock(&context->ctx_lock); + delete_context(context); + return; + } + /* If VFD port is open, context will be deleted by vfd_close */ + } + + mutex_unlock(&context->ctx_lock); + return; +} + +/** + * Process the incoming packet + */ +static void incoming_packet(struct sasem_context *context, + struct urb *urb) +{ + int len = urb->actual_length; + unsigned char *buf = urb->transfer_buffer; + long ms; + struct timeval tv; + + if (len != 8) { + printk(KERN_WARNING "%s: invalid incoming packet size (%d)\n", + __func__, len); + return; + } + +#ifdef DEBUG + int i; + for (i = 0; i < 8; ++i) + printk(KERN_INFO "%02x ", buf[i]); + printk(KERN_INFO "\n"); +#endif + + /* + * Lirc could deal with the repeat code, but we really need to block it + * if it arrives too late. Otherwise we could repeat the wrong code. + */ + + /* get the time since the last button press */ + do_gettimeofday(&tv); + ms = (tv.tv_sec - context->presstime.tv_sec) * 1000 + + (tv.tv_usec - context->presstime.tv_usec) / 1000; + + if (memcmp(buf, "\x08\0\0\0\0\0\0\0", 8) == 0) { + /* + * the repeat code is being sent, so we copy + * the old code to LIRC + */ + + /* + * NOTE: Only if the last code was less than 250ms ago + * - no one should be able to push another (undetected) button + * in that time and then get a false repeat of the previous + * press but it is long enough for a genuine repeat + */ + if ((ms < 250) && (context->codesaved != 0)) { + memcpy(buf, &context->lastcode, 8); + context->presstime.tv_sec = tv.tv_sec; + context->presstime.tv_usec = tv.tv_usec; + } + } else { + /* save the current valid code for repeats */ + memcpy(&context->lastcode, buf, 8); + /* + * set flag to signal a valid code was save; + * just for safety reasons + */ + context->codesaved = 1; + context->presstime.tv_sec = tv.tv_sec; + context->presstime.tv_usec = tv.tv_usec; + } + + lirc_buffer_write(context->driver->rbuf, buf); + wake_up(&context->driver->rbuf->wait_poll); +} + +/** + * Callback function for USB core API: receive data + */ +static void usb_rx_callback(struct urb *urb) +{ + struct sasem_context *context; + + if (!urb) + return; + context = (struct sasem_context *) urb->context; + if (!context) + return; + + switch (urb->status) { + + case -ENOENT: /* usbcore unlink successful! */ + return; + + case 0: + if (context->ir_isopen) + incoming_packet(context, urb); + break; + + default: + printk(KERN_WARNING "%s: status (%d): ignored", + __func__, urb->status); + break; + } + + usb_submit_urb(context->rx_urb, GFP_ATOMIC); + return; +} + + + +/** + * Callback function for USB core API: Probe + */ +static int sasem_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *dev = NULL; + struct usb_host_interface *iface_desc = NULL; + struct usb_endpoint_descriptor *rx_endpoint = NULL; + struct usb_endpoint_descriptor *tx_endpoint = NULL; + struct urb *rx_urb = NULL; + struct urb *tx_urb = NULL; + struct lirc_driver *driver = NULL; + struct lirc_buffer *rbuf = NULL; + int lirc_minor = 0; + int num_endpoints; + int retval = 0; + int vfd_ep_found; + int ir_ep_found; + int alloc_status; + struct sasem_context *context = NULL; + int i; + + printk(KERN_INFO "%s: found Sasem device\n", __func__); + + + dev = usb_get_dev(interface_to_usbdev(interface)); + iface_desc = interface->cur_altsetting; + num_endpoints = iface_desc->desc.bNumEndpoints; + + /* + * Scan the endpoint list and set: + * first input endpoint = IR endpoint + * first output endpoint = VFD endpoint + */ + + ir_ep_found = 0; + vfd_ep_found = 0; + + for (i = 0; i < num_endpoints && !(ir_ep_found && vfd_ep_found); ++i) { + + struct usb_endpoint_descriptor *ep; + int ep_dir; + int ep_type; + ep = &iface_desc->endpoint [i].desc; + ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK; + ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + + if (!ir_ep_found && + ep_dir == USB_DIR_IN && + ep_type == USB_ENDPOINT_XFER_INT) { + + rx_endpoint = ep; + ir_ep_found = 1; + if (debug) + printk(KERN_INFO "%s: found IR endpoint\n", + __func__); + + } else if (!vfd_ep_found && + ep_dir == USB_DIR_OUT && + ep_type == USB_ENDPOINT_XFER_INT) { + + tx_endpoint = ep; + vfd_ep_found = 1; + if (debug) + printk(KERN_INFO "%s: found VFD endpoint\n", + __func__); + } + } + + /* Input endpoint is mandatory */ + if (!ir_ep_found) { + + err("%s: no valid input (IR) endpoint found.", __func__); + retval = -ENODEV; + goto exit; + } + + if (!vfd_ep_found) + printk(KERN_INFO "%s: no valid output (VFD) endpoint found.\n", + __func__); + + + /* Allocate memory */ + alloc_status = 0; + + context = kzalloc(sizeof(struct sasem_context), GFP_KERNEL); + if (!context) { + err("%s: kzalloc failed for context", __func__); + alloc_status = 1; + goto alloc_status_switch; + } + driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); + if (!driver) { + err("%s: kzalloc failed for lirc_driver", __func__); + alloc_status = 2; + goto alloc_status_switch; + } + rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL); + if (!rbuf) { + err("%s: kmalloc failed for lirc_buffer", __func__); + alloc_status = 3; + goto alloc_status_switch; + } + if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) { + err("%s: lirc_buffer_init failed", __func__); + alloc_status = 4; + goto alloc_status_switch; + } + rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!rx_urb) { + err("%s: usb_alloc_urb failed for IR urb", __func__); + alloc_status = 5; + goto alloc_status_switch; + } + if (vfd_ep_found) { + tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!tx_urb) { + err("%s: usb_alloc_urb failed for VFD urb", + __func__); + alloc_status = 6; + goto alloc_status_switch; + } + } + + mutex_init(&context->ctx_lock); + + strcpy(driver->name, MOD_NAME); + driver->minor = -1; + driver->code_length = 64; + driver->sample_rate = 0; + driver->features = LIRC_CAN_REC_LIRCCODE; + driver->data = context; + driver->rbuf = rbuf; + driver->set_use_inc = ir_open; + driver->set_use_dec = ir_close; + driver->dev = &interface->dev; + driver->owner = THIS_MODULE; + + mutex_lock(&context->ctx_lock); + + lirc_minor = lirc_register_driver(driver); + if (lirc_minor < 0) { + err("%s: lirc_register_driver failed", __func__); + alloc_status = 7; + mutex_unlock(&context->ctx_lock); + } else + printk(KERN_INFO "%s: Registered Sasem driver (minor:%d)\n", + __func__, lirc_minor); + +alloc_status_switch: + + switch (alloc_status) { + + case 7: + if (vfd_ep_found) + usb_free_urb(tx_urb); + case 6: + usb_free_urb(rx_urb); + case 5: + lirc_buffer_free(rbuf); + case 4: + kfree(rbuf); + case 3: + kfree(driver); + case 2: + kfree(context); + context = NULL; + case 1: + retval = -ENOMEM; + goto exit; + } + + /* Needed while unregistering! */ + driver->minor = lirc_minor; + + context->dev = dev; + context->dev_present = 1; + context->rx_endpoint = rx_endpoint; + context->rx_urb = rx_urb; + if (vfd_ep_found) { + context->tx_endpoint = tx_endpoint; + context->tx_urb = tx_urb; + context->vfd_contrast = 1000; /* range 0 - 1000 */ + } + context->driver = driver; + + usb_set_intfdata(interface, context); + + if (vfd_ep_found) { + + if (debug) + printk(KERN_INFO "Registering VFD with sysfs\n"); + if (usb_register_dev(interface, &sasem_class)) + /* Not a fatal error, so ignore */ + printk(KERN_INFO "%s: could not get a minor number " + "for VFD\n", __func__); + } + + printk(KERN_INFO "%s: Sasem device on usb<%d:%d> initialized\n", + __func__, dev->bus->busnum, dev->devnum); + + mutex_unlock(&context->ctx_lock); +exit: + return retval; +} + +/** + * Callback function for USB core API: disonnect + */ +static void sasem_disconnect(struct usb_interface *interface) +{ + struct sasem_context *context; + + /* prevent races with ir_open()/vfd_open() */ + mutex_lock(&disconnect_lock); + + context = usb_get_intfdata(interface); + mutex_lock(&context->ctx_lock); + + printk(KERN_INFO "%s: Sasem device disconnected\n", __func__); + + usb_set_intfdata(interface, NULL); + context->dev_present = 0; + + /* Stop reception */ + usb_kill_urb(context->rx_urb); + + /* Abort ongoing write */ + if (atomic_read(&context->tx.busy)) { + + usb_kill_urb(context->tx_urb); + wait_for_completion(&context->tx.finished); + } + + /* De-register from lirc_dev if IR port is not open */ + if (!context->ir_isopen) + deregister_from_lirc(context); + + usb_deregister_dev(interface, &sasem_class); + + mutex_unlock(&context->ctx_lock); + + if (!context->ir_isopen && !context->vfd_isopen) + delete_context(context); + + mutex_unlock(&disconnect_lock); +} + +static int __init sasem_init(void) +{ + int rc; + + printk(KERN_INFO MOD_DESC ", v" MOD_VERSION "\n"); + printk(KERN_INFO MOD_AUTHOR "\n"); + + rc = usb_register(&sasem_driver); + if (rc < 0) { + err("%s: usb register failed (%d)", __func__, rc); + return -ENODEV; + } + return 0; +} + +static void __exit sasem_exit(void) +{ + usb_deregister(&sasem_driver); + printk(KERN_INFO "module removed. Goodbye!\n"); +} + + +module_init(sasem_init); +module_exit(sasem_exit); diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c new file mode 100644 index 0000000..9456f8e --- /dev/null +++ b/drivers/staging/lirc/lirc_serial.c @@ -0,0 +1,1313 @@ +/* + * lirc_serial.c + * + * lirc_serial - Device driver that records pulse- and pause-lengths + * (space-lengths) between DDCD event on a serial port. + * + * Copyright (C) 1996,97 Ralph Metzler + * Copyright (C) 1998 Trent Piepho + * Copyright (C) 1998 Ben Pfaff + * Copyright (C) 1999 Christoph Bartelmus + * Copyright (C) 2007 Andrei Tanas (suspend/resume support) + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/* + * Steve's changes to improve transmission fidelity: + * - for systems with the rdtsc instruction and the clock counter, a + * send_pule that times the pulses directly using the counter. + * This means that the LIRC_SERIAL_TRANSMITTER_LATENCY fudge is + * not needed. Measurement shows very stable waveform, even where + * PCI activity slows the access to the UART, which trips up other + * versions. + * - For other system, non-integer-microsecond pulse/space lengths, + * done using fixed point binary. So, much more accurate carrier + * frequency. + * - fine tuned transmitter latency, taking advantage of fractional + * microseconds in previous change + * - Fixed bug in the way transmitter latency was accounted for by + * tuning the pulse lengths down - the send_pulse routine ignored + * this overhead as it timed the overall pulse length - so the + * pulse frequency was right but overall pulse length was too + * long. Fixed by accounting for latency on each pulse/space + * iteration. + * + * Steve Davies July 2001 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#ifdef CONFIG_LIRC_SERIAL_NSLU2 +#include +#endif +/* From Intel IXP42X Developer's Manual (#252480-005): */ +/* ftp://download.intel.com/design/network/manuals/25248005.pdf */ +#define UART_IE_IXP42X_UUE 0x40 /* IXP42X UART Unit enable */ +#define UART_IE_IXP42X_RTOIE 0x10 /* IXP42X Receiver Data Timeout int.enable */ + +#include +#include + +#define LIRC_DRIVER_NAME "lirc_serial" + +struct lirc_serial { + int signal_pin; + int signal_pin_change; + u8 on; + u8 off; + long (*send_pulse)(unsigned long length); + void (*send_space)(long length); + int features; + spinlock_t lock; +}; + +#define LIRC_HOMEBREW 0 +#define LIRC_IRDEO 1 +#define LIRC_IRDEO_REMOTE 2 +#define LIRC_ANIMAX 3 +#define LIRC_IGOR 4 +#define LIRC_NSLU2 5 + +/*** module parameters ***/ +static int type; +static int io; +static int irq; +static int iommap; +static int ioshift; +static int softcarrier = 1; +static int share_irq; +static int debug; +static int sense = -1; /* -1 = auto, 0 = active high, 1 = active low */ +static int txsense; /* 0 = active high, 1 = active low */ + +#define dprintk(fmt, args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \ + fmt, ## args); \ + } while (0) + +/* forward declarations */ +static long send_pulse_irdeo(unsigned long length); +static long send_pulse_homebrew(unsigned long length); +static void send_space_irdeo(long length); +static void send_space_homebrew(long length); + +static struct lirc_serial hardware[] = { + [LIRC_HOMEBREW] = { + .signal_pin = UART_MSR_DCD, + .signal_pin_change = UART_MSR_DDCD, + .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR), + .off = (UART_MCR_RTS | UART_MCR_OUT2), + .send_pulse = send_pulse_homebrew, + .send_space = send_space_homebrew, +#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER + .features = (LIRC_CAN_SET_SEND_DUTY_CYCLE | + LIRC_CAN_SET_SEND_CARRIER | + LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2) +#else + .features = LIRC_CAN_REC_MODE2 +#endif + }, + + [LIRC_IRDEO] = { + .signal_pin = UART_MSR_DSR, + .signal_pin_change = UART_MSR_DDSR, + .on = UART_MCR_OUT2, + .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2), + .send_pulse = send_pulse_irdeo, + .send_space = send_space_irdeo, + .features = (LIRC_CAN_SET_SEND_DUTY_CYCLE | + LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2) + }, + + [LIRC_IRDEO_REMOTE] = { + .signal_pin = UART_MSR_DSR, + .signal_pin_change = UART_MSR_DDSR, + .on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2), + .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2), + .send_pulse = send_pulse_irdeo, + .send_space = send_space_irdeo, + .features = (LIRC_CAN_SET_SEND_DUTY_CYCLE | + LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2) + }, + + [LIRC_ANIMAX] = { + .signal_pin = UART_MSR_DCD, + .signal_pin_change = UART_MSR_DDCD, + .on = 0, + .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2), + .send_pulse = NULL, + .send_space = NULL, + .features = LIRC_CAN_REC_MODE2 + }, + + [LIRC_IGOR] = { + .signal_pin = UART_MSR_DSR, + .signal_pin_change = UART_MSR_DDSR, + .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR), + .off = (UART_MCR_RTS | UART_MCR_OUT2), + .send_pulse = send_pulse_homebrew, + .send_space = send_space_homebrew, +#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER + .features = (LIRC_CAN_SET_SEND_DUTY_CYCLE | + LIRC_CAN_SET_SEND_CARRIER | + LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2) +#else + .features = LIRC_CAN_REC_MODE2 +#endif + }, + +#ifdef CONFIG_LIRC_SERIAL_NSLU2 + /* + * Modified Linksys Network Storage Link USB 2.0 (NSLU2): + * We receive on CTS of the 2nd serial port (R142,LHS), we + * transmit with a IR diode between GPIO[1] (green status LED), + * and ground (Matthias Goebl ). + * See also http://www.nslu2-linux.org for this device + */ + [LIRC_NSLU2] = { + .signal_pin = UART_MSR_CTS, + .signal_pin_change = UART_MSR_DCTS, + .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR), + .off = (UART_MCR_RTS | UART_MCR_OUT2), + .send_pulse = send_pulse_homebrew, + .send_space = send_space_homebrew, +#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER + .features = (LIRC_CAN_SET_SEND_DUTY_CYCLE | + LIRC_CAN_SET_SEND_CARRIER | + LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2) +#else + .features = LIRC_CAN_REC_MODE2 +#endif + }, +#endif + +}; + +#define RS_ISR_PASS_LIMIT 256 + +/* + * A long pulse code from a remote might take up to 300 bytes. The + * daemon should read the bytes as soon as they are generated, so take + * the number of keys you think you can push before the daemon runs + * and multiply by 300. The driver will warn you if you overrun this + * buffer. If you have a slow computer or non-busmastering IDE disks, + * maybe you will need to increase this. + */ + +/* This MUST be a power of two! It has to be larger than 1 as well. */ + +#define RBUF_LEN 256 + +static struct timeval lasttv = {0, 0}; + +static struct lirc_buffer rbuf; + +static unsigned int freq = 38000; +static unsigned int duty_cycle = 50; + +/* Initialized in init_timing_params() */ +static unsigned long period; +static unsigned long pulse_width; +static unsigned long space_width; + +#if defined(__i386__) +/* + * From: + * Linux I/O port programming mini-HOWTO + * Author: Riku Saikkonen + * v, 28 December 1997 + * + * [...] + * Actually, a port I/O instruction on most ports in the 0-0x3ff range + * takes almost exactly 1 microsecond, so if you're, for example, using + * the parallel port directly, just do additional inb()s from that port + * to delay. + * [...] + */ +/* transmitter latency 1.5625us 0x1.90 - this figure arrived at from + * comment above plus trimming to match actual measured frequency. + * This will be sensitive to cpu speed, though hopefully most of the 1.5us + * is spent in the uart access. Still - for reference test machine was a + * 1.13GHz Athlon system - Steve + */ + +/* + * changed from 400 to 450 as this works better on slower machines; + * faster machines will use the rdtsc code anyway + */ +#define LIRC_SERIAL_TRANSMITTER_LATENCY 450 + +#else + +/* does anybody have information on other platforms ? */ +/* 256 = 1<<8 */ +#define LIRC_SERIAL_TRANSMITTER_LATENCY 256 + +#endif /* __i386__ */ +/* + * FIXME: should we be using hrtimers instead of this + * LIRC_SERIAL_TRANSMITTER_LATENCY nonsense? + */ + +/* fetch serial input packet (1 byte) from register offset */ +static u8 sinp(int offset) +{ + if (iommap != 0) + /* the register is memory-mapped */ + offset <<= ioshift; + + return inb(io + offset); +} + +/* write serial output packet (1 byte) of value to register offset */ +static void soutp(int offset, u8 value) +{ + if (iommap != 0) + /* the register is memory-mapped */ + offset <<= ioshift; + + outb(value, io + offset); +} + +static void on(void) +{ +#ifdef CONFIG_LIRC_SERIAL_NSLU2 + /* + * On NSLU2, we put the transmit diode between the output of the green + * status LED and ground + */ + if (type == LIRC_NSLU2) { + gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_LOW); + return; + } +#endif + if (txsense) + soutp(UART_MCR, hardware[type].off); + else + soutp(UART_MCR, hardware[type].on); +} + +static void off(void) +{ +#ifdef CONFIG_LIRC_SERIAL_NSLU2 + if (type == LIRC_NSLU2) { + gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_HIGH); + return; + } +#endif + if (txsense) + soutp(UART_MCR, hardware[type].on); + else + soutp(UART_MCR, hardware[type].off); +} + +#ifndef MAX_UDELAY_MS +#define MAX_UDELAY_US 5000 +#else +#define MAX_UDELAY_US (MAX_UDELAY_MS*1000) +#endif + +static void safe_udelay(unsigned long usecs) +{ + while (usecs > MAX_UDELAY_US) { + udelay(MAX_UDELAY_US); + usecs -= MAX_UDELAY_US; + } + udelay(usecs); +} + +#ifdef USE_RDTSC +/* + * This is an overflow/precision juggle, complicated in that we can't + * do long long divide in the kernel + */ + +/* + * When we use the rdtsc instruction to measure clocks, we keep the + * pulse and space widths as clock cycles. As this is CPU speed + * dependent, the widths must be calculated in init_port and ioctl + * time + */ + +/* So send_pulse can quickly convert microseconds to clocks */ +static unsigned long conv_us_to_clocks; + +static int init_timing_params(unsigned int new_duty_cycle, + unsigned int new_freq) +{ + unsigned long long loops_per_sec, work; + + duty_cycle = new_duty_cycle; + freq = new_freq; + + loops_per_sec = current_cpu_data.loops_per_jiffy; + loops_per_sec *= HZ; + + /* How many clocks in a microsecond?, avoiding long long divide */ + work = loops_per_sec; + work *= 4295; /* 4295 = 2^32 / 1e6 */ + conv_us_to_clocks = (work >> 32); + + /* + * Carrier period in clocks, approach good up to 32GHz clock, + * gets carrier frequency within 8Hz + */ + period = loops_per_sec >> 3; + period /= (freq >> 3); + + /* Derive pulse and space from the period */ + pulse_width = period * duty_cycle / 100; + space_width = period - pulse_width; + dprintk("in init_timing_params, freq=%d, duty_cycle=%d, " + "clk/jiffy=%ld, pulse=%ld, space=%ld, " + "conv_us_to_clocks=%ld\n", + freq, duty_cycle, current_cpu_data.loops_per_jiffy, + pulse_width, space_width, conv_us_to_clocks); + return 0; +} +#else /* ! USE_RDTSC */ +static int init_timing_params(unsigned int new_duty_cycle, + unsigned int new_freq) +{ +/* + * period, pulse/space width are kept with 8 binary places - + * IE multiplied by 256. + */ + if (256 * 1000000L / new_freq * new_duty_cycle / 100 <= + LIRC_SERIAL_TRANSMITTER_LATENCY) + return -EINVAL; + if (256 * 1000000L / new_freq * (100 - new_duty_cycle) / 100 <= + LIRC_SERIAL_TRANSMITTER_LATENCY) + return -EINVAL; + duty_cycle = new_duty_cycle; + freq = new_freq; + period = 256 * 1000000L / freq; + pulse_width = period * duty_cycle / 100; + space_width = period - pulse_width; + dprintk("in init_timing_params, freq=%d pulse=%ld, " + "space=%ld\n", freq, pulse_width, space_width); + return 0; +} +#endif /* USE_RDTSC */ + + +/* return value: space length delta */ + +static long send_pulse_irdeo(unsigned long length) +{ + long rawbits, ret; + int i; + unsigned char output; + unsigned char chunk, shifted; + + /* how many bits have to be sent ? */ + rawbits = length * 1152 / 10000; + if (duty_cycle > 50) + chunk = 3; + else + chunk = 1; + for (i = 0, output = 0x7f; rawbits > 0; rawbits -= 3) { + shifted = chunk << (i * 3); + shifted >>= 1; + output &= (~shifted); + i++; + if (i == 3) { + soutp(UART_TX, output); + while (!(sinp(UART_LSR) & UART_LSR_THRE)) + ; + output = 0x7f; + i = 0; + } + } + if (i != 0) { + soutp(UART_TX, output); + while (!(sinp(UART_LSR) & UART_LSR_TEMT)) + ; + } + + if (i == 0) + ret = (-rawbits) * 10000 / 1152; + else + ret = (3 - i) * 3 * 10000 / 1152 + (-rawbits) * 10000 / 1152; + + return ret; +} + +#ifdef USE_RDTSC +/* Version that uses Pentium rdtsc instruction to measure clocks */ + +/* + * This version does sub-microsecond timing using rdtsc instruction, + * and does away with the fudged LIRC_SERIAL_TRANSMITTER_LATENCY + * Implicitly i586 architecture... - Steve + */ + +static long send_pulse_homebrew_softcarrier(unsigned long length) +{ + int flag; + unsigned long target, start, now; + + /* Get going quick as we can */ + rdtscl(start); + on(); + /* Convert length from microseconds to clocks */ + length *= conv_us_to_clocks; + /* And loop till time is up - flipping at right intervals */ + now = start; + target = pulse_width; + flag = 1; + /* + * FIXME: This looks like a hard busy wait, without even an occasional, + * polite, cpu_relax() call. There's got to be a better way? + * + * The i2c code has the result of a lot of bit-banging work, I wonder if + * there's something there which could be helpful here. + */ + while ((now - start) < length) { + /* Delay till flip time */ + do { + rdtscl(now); + } while ((now - start) < target); + + /* flip */ + if (flag) { + rdtscl(now); + off(); + target += space_width; + } else { + rdtscl(now); on(); + target += pulse_width; + } + flag = !flag; + } + rdtscl(now); + return ((now - start) - length) / conv_us_to_clocks; +} +#else /* ! USE_RDTSC */ +/* Version using udelay() */ + +/* + * here we use fixed point arithmetic, with 8 + * fractional bits. that gets us within 0.1% or so of the right average + * frequency, albeit with some jitter in pulse length - Steve + */ + +/* To match 8 fractional bits used for pulse/space length */ + +static long send_pulse_homebrew_softcarrier(unsigned long length) +{ + int flag; + unsigned long actual, target, d; + length <<= 8; + + actual = 0; target = 0; flag = 0; + while (actual < length) { + if (flag) { + off(); + target += space_width; + } else { + on(); + target += pulse_width; + } + d = (target - actual - + LIRC_SERIAL_TRANSMITTER_LATENCY + 128) >> 8; + /* + * Note - we've checked in ioctl that the pulse/space + * widths are big enough so that d is > 0 + */ + udelay(d); + actual += (d << 8) + LIRC_SERIAL_TRANSMITTER_LATENCY; + flag = !flag; + } + return (actual-length) >> 8; +} +#endif /* USE_RDTSC */ + +static long send_pulse_homebrew(unsigned long length) +{ + if (length <= 0) + return 0; + + if (softcarrier) + return send_pulse_homebrew_softcarrier(length); + else { + on(); + safe_udelay(length); + return 0; + } +} + +static void send_space_irdeo(long length) +{ + if (length <= 0) + return; + + safe_udelay(length); +} + +static void send_space_homebrew(long length) +{ + off(); + if (length <= 0) + return; + safe_udelay(length); +} + +static void rbwrite(int l) +{ + if (lirc_buffer_full(&rbuf)) { + /* no new signals will be accepted */ + dprintk("Buffer overrun\n"); + return; + } + lirc_buffer_write(&rbuf, (void *)&l); +} + +static void frbwrite(int l) +{ + /* simple noise filter */ + static int pulse, space; + static unsigned int ptr; + + if (ptr > 0 && (l & PULSE_BIT)) { + pulse += l & PULSE_MASK; + if (pulse > 250) { + rbwrite(space); + rbwrite(pulse | PULSE_BIT); + ptr = 0; + pulse = 0; + } + return; + } + if (!(l & PULSE_BIT)) { + if (ptr == 0) { + if (l > 20000) { + space = l; + ptr++; + return; + } + } else { + if (l > 20000) { + space += pulse; + if (space > PULSE_MASK) + space = PULSE_MASK; + space += l; + if (space > PULSE_MASK) + space = PULSE_MASK; + pulse = 0; + return; + } + rbwrite(space); + rbwrite(pulse | PULSE_BIT); + ptr = 0; + pulse = 0; + } + } + rbwrite(l); +} + +static irqreturn_t irq_handler(int i, void *blah) +{ + struct timeval tv; + int counter, dcd; + u8 status; + long deltv; + int data; + static int last_dcd = -1; + + if ((sinp(UART_IIR) & UART_IIR_NO_INT)) { + /* not our interrupt */ + return IRQ_NONE; + } + + counter = 0; + do { + counter++; + status = sinp(UART_MSR); + if (counter > RS_ISR_PASS_LIMIT) { + printk(KERN_WARNING LIRC_DRIVER_NAME ": AIEEEE: " + "We're caught!\n"); + break; + } + if ((status & hardware[type].signal_pin_change) + && sense != -1) { + /* get current time */ + do_gettimeofday(&tv); + + /* New mode, written by Trent Piepho + . */ + + /* + * The old format was not very portable. + * We now use an int to pass pulses + * and spaces to user space. + * + * If PULSE_BIT is set a pulse has been + * received, otherwise a space has been + * received. The driver needs to know if your + * receiver is active high or active low, or + * the space/pulse sense could be + * inverted. The bits denoted by PULSE_MASK are + * the length in microseconds. Lengths greater + * than or equal to 16 seconds are clamped to + * PULSE_MASK. All other bits are unused. + * This is a much simpler interface for user + * programs, as well as eliminating "out of + * phase" errors with space/pulse + * autodetection. + */ + + /* calc time since last interrupt in microseconds */ + dcd = (status & hardware[type].signal_pin) ? 1 : 0; + + if (dcd == last_dcd) { + printk(KERN_WARNING LIRC_DRIVER_NAME + ": ignoring spike: %d %d %lx %lx %lx %lx\n", + dcd, sense, + tv.tv_sec, lasttv.tv_sec, + tv.tv_usec, lasttv.tv_usec); + continue; + } + + deltv = tv.tv_sec-lasttv.tv_sec; + if (tv.tv_sec < lasttv.tv_sec || + (tv.tv_sec == lasttv.tv_sec && + tv.tv_usec < lasttv.tv_usec)) { + printk(KERN_WARNING LIRC_DRIVER_NAME + ": AIEEEE: your clock just jumped " + "backwards\n"); + printk(KERN_WARNING LIRC_DRIVER_NAME + ": %d %d %lx %lx %lx %lx\n", + dcd, sense, + tv.tv_sec, lasttv.tv_sec, + tv.tv_usec, lasttv.tv_usec); + data = PULSE_MASK; + } else if (deltv > 15) { + data = PULSE_MASK; /* really long time */ + if (!(dcd^sense)) { + /* sanity check */ + printk(KERN_WARNING LIRC_DRIVER_NAME + ": AIEEEE: " + "%d %d %lx %lx %lx %lx\n", + dcd, sense, + tv.tv_sec, lasttv.tv_sec, + tv.tv_usec, lasttv.tv_usec); + /* + * detecting pulse while this + * MUST be a space! + */ + sense = sense ? 0 : 1; + } + } else + data = (int) (deltv*1000000 + + tv.tv_usec - + lasttv.tv_usec); + frbwrite(dcd^sense ? data : (data|PULSE_BIT)); + lasttv = tv; + last_dcd = dcd; + wake_up_interruptible(&rbuf.wait_poll); + } + } while (!(sinp(UART_IIR) & UART_IIR_NO_INT)); /* still pending ? */ + return IRQ_HANDLED; +} + + +static int hardware_init_port(void) +{ + u8 scratch, scratch2, scratch3; + + /* + * This is a simple port existence test, borrowed from the autoconfig + * function in drivers/serial/8250.c + */ + scratch = sinp(UART_IER); + soutp(UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + scratch2 = sinp(UART_IER) & 0x0f; + soutp(UART_IER, 0x0f); +#ifdef __i386__ + outb(0x00, 0x080); +#endif + scratch3 = sinp(UART_IER) & 0x0f; + soutp(UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0f) { + /* we fail, there's nothing here */ + printk(KERN_ERR LIRC_DRIVER_NAME ": port existence test " + "failed, cannot continue\n"); + return -EINVAL; + } + + + + /* Set DLAB 0. */ + soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); + + /* First of all, disable all interrupts */ + soutp(UART_IER, sinp(UART_IER) & + (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); + + /* Clear registers. */ + sinp(UART_LSR); + sinp(UART_RX); + sinp(UART_IIR); + sinp(UART_MSR); + +#ifdef CONFIG_LIRC_SERIAL_NSLU2 + if (type == LIRC_NSLU2) { + /* Setup NSLU2 UART */ + + /* Enable UART */ + soutp(UART_IER, sinp(UART_IER) | UART_IE_IXP42X_UUE); + /* Disable Receiver data Time out interrupt */ + soutp(UART_IER, sinp(UART_IER) & ~UART_IE_IXP42X_RTOIE); + /* set out2 = interrupt unmask; off() doesn't set MCR + on NSLU2 */ + soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2); + } +#endif + + /* Set line for power source */ + off(); + + /* Clear registers again to be sure. */ + sinp(UART_LSR); + sinp(UART_RX); + sinp(UART_IIR); + sinp(UART_MSR); + + switch (type) { + case LIRC_IRDEO: + case LIRC_IRDEO_REMOTE: + /* setup port to 7N1 @ 115200 Baud */ + /* 7N1+start = 9 bits at 115200 ~ 3 bits at 38kHz */ + + /* Set DLAB 1. */ + soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB); + /* Set divisor to 1 => 115200 Baud */ + soutp(UART_DLM, 0); + soutp(UART_DLL, 1); + /* Set DLAB 0 + 7N1 */ + soutp(UART_LCR, UART_LCR_WLEN7); + /* THR interrupt already disabled at this point */ + break; + default: + break; + } + + return 0; +} + +static int init_port(void) +{ + int i, nlow, nhigh; + + /* Reserve io region. */ + /* + * Future MMAP-Developers: Attention! + * For memory mapped I/O you *might* need to use ioremap() first, + * for the NSLU2 it's done in boot code. + */ + if (((iommap != 0) + && (request_mem_region(iommap, 8 << ioshift, + LIRC_DRIVER_NAME) == NULL)) + || ((iommap == 0) + && (request_region(io, 8, LIRC_DRIVER_NAME) == NULL))) { + printk(KERN_ERR LIRC_DRIVER_NAME + ": port %04x already in use\n", io); + printk(KERN_WARNING LIRC_DRIVER_NAME + ": use 'setserial /dev/ttySX uart none'\n"); + printk(KERN_WARNING LIRC_DRIVER_NAME + ": or compile the serial port driver as module and\n"); + printk(KERN_WARNING LIRC_DRIVER_NAME + ": make sure this module is loaded first\n"); + return -EBUSY; + } + + if (hardware_init_port() < 0) + return -EINVAL; + + /* Initialize pulse/space widths */ + init_timing_params(duty_cycle, freq); + + /* If pin is high, then this must be an active low receiver. */ + if (sense == -1) { + /* wait 1/2 sec for the power supply */ + msleep(500); + + /* + * probe 9 times every 0.04s, collect "votes" for + * active high/low + */ + nlow = 0; + nhigh = 0; + for (i = 0; i < 9; i++) { + if (sinp(UART_MSR) & hardware[type].signal_pin) + nlow++; + else + nhigh++; + msleep(40); + } + sense = (nlow >= nhigh ? 1 : 0); + printk(KERN_INFO LIRC_DRIVER_NAME ": auto-detected active " + "%s receiver\n", sense ? "low" : "high"); + } else + printk(KERN_INFO LIRC_DRIVER_NAME ": Manually using active " + "%s receiver\n", sense ? "low" : "high"); + + return 0; +} + +static int set_use_inc(void *data) +{ + int result; + unsigned long flags; + + /* initialize timestamp */ + do_gettimeofday(&lasttv); + + result = request_irq(irq, irq_handler, + IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0), + LIRC_DRIVER_NAME, (void *)&hardware); + + switch (result) { + case -EBUSY: + printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq); + return -EBUSY; + case -EINVAL: + printk(KERN_ERR LIRC_DRIVER_NAME + ": Bad irq number or handler\n"); + return -EINVAL; + default: + dprintk("Interrupt %d, port %04x obtained\n", irq, io); + break; + }; + + spin_lock_irqsave(&hardware[type].lock, flags); + + /* Set DLAB 0. */ + soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); + + soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI); + + spin_unlock_irqrestore(&hardware[type].lock, flags); + + return 0; +} + +static void set_use_dec(void *data) +{ unsigned long flags; + + spin_lock_irqsave(&hardware[type].lock, flags); + + /* Set DLAB 0. */ + soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); + + /* First of all, disable all interrupts */ + soutp(UART_IER, sinp(UART_IER) & + (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); + spin_unlock_irqrestore(&hardware[type].lock, flags); + + free_irq(irq, (void *)&hardware); + + dprintk("freed IRQ %d\n", irq); +} + +static ssize_t lirc_write(struct file *file, const char *buf, + size_t n, loff_t *ppos) +{ + int i, count; + unsigned long flags; + long delta = 0; + int *wbuf; + + if (!(hardware[type].features & LIRC_CAN_SEND_PULSE)) + return -EBADF; + + count = n / sizeof(int); + if (n % sizeof(int) || count % 2 == 0) + return -EINVAL; + wbuf = memdup_user(buf, n); + if (PTR_ERR(wbuf)) + return PTR_ERR(wbuf); + spin_lock_irqsave(&hardware[type].lock, flags); + if (type == LIRC_IRDEO) { + /* DTR, RTS down */ + on(); + } + for (i = 0; i < count; i++) { + if (i%2) + hardware[type].send_space(wbuf[i] - delta); + else + delta = hardware[type].send_pulse(wbuf[i]); + } + off(); + spin_unlock_irqrestore(&hardware[type].lock, flags); + return n; +} + +static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) +{ + int result; + unsigned long value; + unsigned int ivalue; + + switch (cmd) { + case LIRC_GET_SEND_MODE: + if (!(hardware[type].features&LIRC_CAN_SEND_MASK)) + return -ENOIOCTLCMD; + + result = put_user(LIRC_SEND2MODE + (hardware[type].features&LIRC_CAN_SEND_MASK), + (unsigned long *) arg); + if (result) + return result; + break; + + case LIRC_SET_SEND_MODE: + if (!(hardware[type].features&LIRC_CAN_SEND_MASK)) + return -ENOIOCTLCMD; + + result = get_user(value, (unsigned long *) arg); + if (result) + return result; + /* only LIRC_MODE_PULSE supported */ + if (value != LIRC_MODE_PULSE) + return -ENOSYS; + break; + + case LIRC_GET_LENGTH: + return -ENOSYS; + break; + + case LIRC_SET_SEND_DUTY_CYCLE: + dprintk("SET_SEND_DUTY_CYCLE\n"); + if (!(hardware[type].features&LIRC_CAN_SET_SEND_DUTY_CYCLE)) + return -ENOIOCTLCMD; + + result = get_user(ivalue, (unsigned int *) arg); + if (result) + return result; + if (ivalue <= 0 || ivalue > 100) + return -EINVAL; + return init_timing_params(ivalue, freq); + break; + + case LIRC_SET_SEND_CARRIER: + dprintk("SET_SEND_CARRIER\n"); + if (!(hardware[type].features&LIRC_CAN_SET_SEND_CARRIER)) + return -ENOIOCTLCMD; + + result = get_user(ivalue, (unsigned int *) arg); + if (result) + return result; + if (ivalue > 500000 || ivalue < 20000) + return -EINVAL; + return init_timing_params(duty_cycle, ivalue); + break; + + default: + return lirc_dev_fop_ioctl(filep, cmd, arg); + } + return 0; +} + +static const struct file_operations lirc_fops = { + .owner = THIS_MODULE, + .write = lirc_write, + .unlocked_ioctl = lirc_ioctl, + .read = lirc_dev_fop_read, + .poll = lirc_dev_fop_poll, + .open = lirc_dev_fop_open, + .release = lirc_dev_fop_close, +}; + +static struct lirc_driver driver = { + .name = LIRC_DRIVER_NAME, + .minor = -1, + .code_length = 1, + .sample_rate = 0, + .data = NULL, + .add_to_buf = NULL, + .rbuf = &rbuf, + .set_use_inc = set_use_inc, + .set_use_dec = set_use_dec, + .fops = &lirc_fops, + .dev = NULL, + .owner = THIS_MODULE, +}; + +static struct platform_device *lirc_serial_dev; + +static int __devinit lirc_serial_probe(struct platform_device *dev) +{ + return 0; +} + +static int __devexit lirc_serial_remove(struct platform_device *dev) +{ + return 0; +} + +static int lirc_serial_suspend(struct platform_device *dev, + pm_message_t state) +{ + /* Set DLAB 0. */ + soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); + + /* Disable all interrupts */ + soutp(UART_IER, sinp(UART_IER) & + (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); + + /* Clear registers. */ + sinp(UART_LSR); + sinp(UART_RX); + sinp(UART_IIR); + sinp(UART_MSR); + + return 0; +} + +/* twisty maze... need a forward-declaration here... */ +static void lirc_serial_exit(void); + +static int lirc_serial_resume(struct platform_device *dev) +{ + unsigned long flags; + + if (hardware_init_port() < 0) { + lirc_serial_exit(); + return -EINVAL; + } + + spin_lock_irqsave(&hardware[type].lock, flags); + /* Enable Interrupt */ + do_gettimeofday(&lasttv); + soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI); + off(); + + lirc_buffer_clear(&rbuf); + + spin_unlock_irqrestore(&hardware[type].lock, flags); + + return 0; +} + +static struct platform_driver lirc_serial_driver = { + .probe = lirc_serial_probe, + .remove = __devexit_p(lirc_serial_remove), + .suspend = lirc_serial_suspend, + .resume = lirc_serial_resume, + .driver = { + .name = "lirc_serial", + .owner = THIS_MODULE, + }, +}; + +static int __init lirc_serial_init(void) +{ + int result; + + /* Init read buffer. */ + result = lirc_buffer_init(&rbuf, sizeof(int), RBUF_LEN); + if (result < 0) + return -ENOMEM; + + result = platform_driver_register(&lirc_serial_driver); + if (result) { + printk("lirc register returned %d\n", result); + goto exit_buffer_free; + } + + lirc_serial_dev = platform_device_alloc("lirc_serial", 0); + if (!lirc_serial_dev) { + result = -ENOMEM; + goto exit_driver_unregister; + } + + result = platform_device_add(lirc_serial_dev); + if (result) + goto exit_device_put; + + return 0; + +exit_device_put: + platform_device_put(lirc_serial_dev); +exit_driver_unregister: + platform_driver_unregister(&lirc_serial_driver); +exit_buffer_free: + lirc_buffer_free(&rbuf); + return result; +} + +static void lirc_serial_exit(void) +{ + platform_device_unregister(lirc_serial_dev); + platform_driver_unregister(&lirc_serial_driver); + lirc_buffer_free(&rbuf); +} + +static int __init lirc_serial_init_module(void) +{ + int result; + + result = lirc_serial_init(); + if (result) + return result; + + switch (type) { + case LIRC_HOMEBREW: + case LIRC_IRDEO: + case LIRC_IRDEO_REMOTE: + case LIRC_ANIMAX: + case LIRC_IGOR: + /* if nothing specified, use ttyS0/com1 and irq 4 */ + io = io ? io : 0x3f8; + irq = irq ? irq : 4; + break; +#ifdef CONFIG_LIRC_SERIAL_NSLU2 + case LIRC_NSLU2: + io = io ? io : IRQ_IXP4XX_UART2; + irq = irq ? irq : (IXP4XX_UART2_BASE_VIRT + REG_OFFSET); + iommap = iommap ? iommap : IXP4XX_UART2_BASE_PHYS; + ioshift = ioshift ? ioshift : 2; + break; +#endif + default: + result = -EINVAL; + goto exit_serial_exit; + } + if (!softcarrier) { + switch (type) { + case LIRC_HOMEBREW: + case LIRC_IGOR: +#ifdef CONFIG_LIRC_SERIAL_NSLU2 + case LIRC_NSLU2: +#endif + hardware[type].features &= + ~(LIRC_CAN_SET_SEND_DUTY_CYCLE| + LIRC_CAN_SET_SEND_CARRIER); + break; + } + } + + result = init_port(); + if (result < 0) + goto exit_serial_exit; + driver.features = hardware[type].features; + driver.dev = &lirc_serial_dev->dev; + driver.minor = lirc_register_driver(&driver); + if (driver.minor < 0) { + printk(KERN_ERR LIRC_DRIVER_NAME + ": register_chrdev failed!\n"); + result = -EIO; + goto exit_release; + } + return 0; +exit_release: + release_region(io, 8); +exit_serial_exit: + lirc_serial_exit(); + return result; +} + +static void __exit lirc_serial_exit_module(void) +{ + lirc_serial_exit(); + if (iommap != 0) + release_mem_region(iommap, 8 << ioshift); + else + release_region(io, 8); + lirc_unregister_driver(driver.minor); + dprintk("cleaned up module\n"); +} + + +module_init(lirc_serial_init_module); +module_exit(lirc_serial_exit_module); + +MODULE_DESCRIPTION("Infra-red receiver driver for serial ports."); +MODULE_AUTHOR("Ralph Metzler, Trent Piepho, Ben Pfaff, " + "Christoph Bartelmus, Andrei Tanas"); +MODULE_LICENSE("GPL"); + +module_param(type, int, S_IRUGO); +MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo," + " 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug," + " 5 = NSLU2 RX:CTS2/TX:GreenLED)"); + +module_param(io, int, S_IRUGO); +MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)"); + +/* some architectures (e.g. intel xscale) have memory mapped registers */ +module_param(iommap, bool, S_IRUGO); +MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O" + " (0 = no memory mapped io)"); + +/* + * some architectures (e.g. intel xscale) align the 8bit serial registers + * on 32bit word boundaries. + * See linux-kernel/serial/8250.c serial_in()/out() + */ +module_param(ioshift, int, S_IRUGO); +MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)"); + +module_param(irq, int, S_IRUGO); +MODULE_PARM_DESC(irq, "Interrupt (4 or 3)"); + +module_param(share_irq, bool, S_IRUGO); +MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)"); + +module_param(sense, bool, S_IRUGO); +MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit" + " (0 = active high, 1 = active low )"); + +#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER +module_param(txsense, bool, S_IRUGO); +MODULE_PARM_DESC(txsense, "Sense of transmitter circuit" + " (0 = active high, 1 = active low )"); +#endif + +module_param(softcarrier, bool, S_IRUGO); +MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default on)"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging messages"); diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c new file mode 100644 index 0000000..eb08fa7 --- /dev/null +++ b/drivers/staging/lirc/lirc_sir.c @@ -0,0 +1,1282 @@ +/* + * LIRC SIR driver, (C) 2000 Milan Pikula + * + * lirc_sir - Device driver for use with SIR (serial infra red) + * mode of IrDA on many notebooks. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * 2000/09/16 Frank Przybylski : + * added timeout and relaxed pulse detection, removed gap bug + * + * 2000/12/15 Christoph Bartelmus : + * added support for Tekram Irmate 210 (sending does not work yet, + * kind of disappointing that nobody was able to implement that + * before), + * major clean-up + * + * 2001/02/27 Christoph Bartelmus : + * added support for StrongARM SA1100 embedded microprocessor + * parts cut'n'pasted from sa1100_ir.c (C) 2000 Russell King + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef LIRC_ON_SA1100 +#include +#ifdef CONFIG_SA1100_COLLIE +#include +#include +#endif +#endif + +#include + +#include +#include + +/* SECTION: Definitions */ + +/*** Tekram dongle ***/ +#ifdef LIRC_SIR_TEKRAM +/* stolen from kernel source */ +/* definitions for Tekram dongle */ +#define TEKRAM_115200 0x00 +#define TEKRAM_57600 0x01 +#define TEKRAM_38400 0x02 +#define TEKRAM_19200 0x03 +#define TEKRAM_9600 0x04 +#define TEKRAM_2400 0x08 + +#define TEKRAM_PW 0x10 /* Pulse select bit */ + +/* 10bit * 1s/115200bit in milliseconds = 87ms*/ +#define TIME_CONST (10000000ul/115200ul) + +#endif + +#ifdef LIRC_SIR_ACTISYS_ACT200L +static void init_act200(void); +#elif defined(LIRC_SIR_ACTISYS_ACT220L) +static void init_act220(void); +#endif + +/*** SA1100 ***/ +#ifdef LIRC_ON_SA1100 +struct sa1100_ser2_registers { + /* HSSP control register */ + unsigned char hscr0; + /* UART registers */ + unsigned char utcr0; + unsigned char utcr1; + unsigned char utcr2; + unsigned char utcr3; + unsigned char utcr4; + unsigned char utdr; + unsigned char utsr0; + unsigned char utsr1; +} sr; + +static int irq = IRQ_Ser2ICP; + +#define LIRC_ON_SA1100_TRANSMITTER_LATENCY 0 + +/* pulse/space ratio of 50/50 */ +static unsigned long pulse_width = (13-LIRC_ON_SA1100_TRANSMITTER_LATENCY); +/* 1000000/freq-pulse_width */ +static unsigned long space_width = (13-LIRC_ON_SA1100_TRANSMITTER_LATENCY); +static unsigned int freq = 38000; /* modulation frequency */ +static unsigned int duty_cycle = 50; /* duty cycle of 50% */ + +#endif + +#define RBUF_LEN 1024 +#define WBUF_LEN 1024 + +#define LIRC_DRIVER_NAME "lirc_sir" + +#define PULSE '[' + +#ifndef LIRC_SIR_TEKRAM +/* 9bit * 1s/115200bit in milli seconds = 78.125ms*/ +#define TIME_CONST (9000000ul/115200ul) +#endif + + +/* timeout for sequences in jiffies (=5/100s), must be longer than TIME_CONST */ +#define SIR_TIMEOUT (HZ*5/100) + +#ifndef LIRC_ON_SA1100 +#ifndef LIRC_IRQ +#define LIRC_IRQ 4 +#endif +#ifndef LIRC_PORT +/* for external dongles, default to com1 */ +#if defined(LIRC_SIR_ACTISYS_ACT200L) || \ + defined(LIRC_SIR_ACTISYS_ACT220L) || \ + defined(LIRC_SIR_TEKRAM) +#define LIRC_PORT 0x3f8 +#else +/* onboard sir ports are typically com3 */ +#define LIRC_PORT 0x3e8 +#endif +#endif + +static int io = LIRC_PORT; +static int irq = LIRC_IRQ; +static int threshold = 3; +#endif + +static DEFINE_SPINLOCK(timer_lock); +static struct timer_list timerlist; +/* time of last signal change detected */ +static struct timeval last_tv = {0, 0}; +/* time of last UART data ready interrupt */ +static struct timeval last_intr_tv = {0, 0}; +static int last_value; + +static DECLARE_WAIT_QUEUE_HEAD(lirc_read_queue); + +static DEFINE_SPINLOCK(hardware_lock); + +static int rx_buf[RBUF_LEN]; +static unsigned int rx_tail, rx_head; + +static int debug; +#define dprintk(fmt, args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \ + fmt, ## args); \ + } while (0) + +/* SECTION: Prototypes */ + +/* Communication with user-space */ +static unsigned int lirc_poll(struct file *file, poll_table *wait); +static ssize_t lirc_read(struct file *file, char *buf, size_t count, + loff_t *ppos); +static ssize_t lirc_write(struct file *file, const char *buf, size_t n, + loff_t *pos); +static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); +static void add_read_queue(int flag, unsigned long val); +static int init_chrdev(void); +static void drop_chrdev(void); +/* Hardware */ +static irqreturn_t sir_interrupt(int irq, void *dev_id); +static void send_space(unsigned long len); +static void send_pulse(unsigned long len); +static int init_hardware(void); +static void drop_hardware(void); +/* Initialisation */ +static int init_port(void); +static void drop_port(void); + +#ifdef LIRC_ON_SA1100 +static void on(void) +{ + PPSR |= PPC_TXD2; +} + +static void off(void) +{ + PPSR &= ~PPC_TXD2; +} +#else +static inline unsigned int sinp(int offset) +{ + return inb(io + offset); +} + +static inline void soutp(int offset, int value) +{ + outb(value, io + offset); +} +#endif + +#ifndef MAX_UDELAY_MS +#define MAX_UDELAY_US 5000 +#else +#define MAX_UDELAY_US (MAX_UDELAY_MS*1000) +#endif + +static void safe_udelay(unsigned long usecs) +{ + while (usecs > MAX_UDELAY_US) { + udelay(MAX_UDELAY_US); + usecs -= MAX_UDELAY_US; + } + udelay(usecs); +} + +/* SECTION: Communication with user-space */ + +static unsigned int lirc_poll(struct file *file, poll_table *wait) +{ + poll_wait(file, &lirc_read_queue, wait); + if (rx_head != rx_tail) + return POLLIN | POLLRDNORM; + return 0; +} + +static ssize_t lirc_read(struct file *file, char *buf, size_t count, + loff_t *ppos) +{ + int n = 0; + int retval = 0; + DECLARE_WAITQUEUE(wait, current); + + if (count % sizeof(int)) + return -EINVAL; + + add_wait_queue(&lirc_read_queue, &wait); + set_current_state(TASK_INTERRUPTIBLE); + while (n < count) { + if (rx_head != rx_tail) { + if (copy_to_user((void *) buf + n, + (void *) (rx_buf + rx_head), + sizeof(int))) { + retval = -EFAULT; + break; + } + rx_head = (rx_head + 1) & (RBUF_LEN - 1); + n += sizeof(int); + } else { + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + break; + } + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + } + } + remove_wait_queue(&lirc_read_queue, &wait); + set_current_state(TASK_RUNNING); + return n ? n : retval; +} +static ssize_t lirc_write(struct file *file, const char *buf, size_t n, + loff_t *pos) +{ + unsigned long flags; + int i, count; + int *tx_buf; + + count = n / sizeof(int); + if (n % sizeof(int) || count % 2 == 0) + return -EINVAL; + tx_buf = memdup_user(buf, n); + if (IS_ERR(tx_buf)) + return PTR_ERR(tx_buf); + i = 0; +#ifdef LIRC_ON_SA1100 + /* disable receiver */ + Ser2UTCR3 = 0; +#endif + local_irq_save(flags); + while (1) { + if (i >= count) + break; + if (tx_buf[i]) + send_pulse(tx_buf[i]); + i++; + if (i >= count) + break; + if (tx_buf[i]) + send_space(tx_buf[i]); + i++; + } + local_irq_restore(flags); +#ifdef LIRC_ON_SA1100 + off(); + udelay(1000); /* wait 1ms for IR diode to recover */ + Ser2UTCR3 = 0; + /* clear status register to prevent unwanted interrupts */ + Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB); + /* enable receiver */ + Ser2UTCR3 = UTCR3_RXE|UTCR3_RIE; +#endif + return count; +} + +static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) +{ + int retval = 0; + unsigned long value = 0; +#ifdef LIRC_ON_SA1100 + unsigned int ivalue; + + if (cmd == LIRC_GET_FEATURES) + value = LIRC_CAN_SEND_PULSE | + LIRC_CAN_SET_SEND_DUTY_CYCLE | + LIRC_CAN_SET_SEND_CARRIER | + LIRC_CAN_REC_MODE2; + else if (cmd == LIRC_GET_SEND_MODE) + value = LIRC_MODE_PULSE; + else if (cmd == LIRC_GET_REC_MODE) + value = LIRC_MODE_MODE2; +#else + if (cmd == LIRC_GET_FEATURES) + value = LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2; + else if (cmd == LIRC_GET_SEND_MODE) + value = LIRC_MODE_PULSE; + else if (cmd == LIRC_GET_REC_MODE) + value = LIRC_MODE_MODE2; +#endif + + switch (cmd) { + case LIRC_GET_FEATURES: + case LIRC_GET_SEND_MODE: + case LIRC_GET_REC_MODE: + retval = put_user(value, (unsigned long *) arg); + break; + + case LIRC_SET_SEND_MODE: + case LIRC_SET_REC_MODE: + retval = get_user(value, (unsigned long *) arg); + break; +#ifdef LIRC_ON_SA1100 + case LIRC_SET_SEND_DUTY_CYCLE: + retval = get_user(ivalue, (unsigned int *) arg); + if (retval) + return retval; + if (ivalue <= 0 || ivalue > 100) + return -EINVAL; + /* (ivalue/100)*(1000000/freq) */ + duty_cycle = ivalue; + pulse_width = (unsigned long) duty_cycle*10000/freq; + space_width = (unsigned long) 1000000L/freq-pulse_width; + if (pulse_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY) + pulse_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY; + if (space_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY) + space_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY; + break; + case LIRC_SET_SEND_CARRIER: + retval = get_user(ivalue, (unsigned int *) arg); + if (retval) + return retval; + if (ivalue > 500000 || ivalue < 20000) + return -EINVAL; + freq = ivalue; + pulse_width = (unsigned long) duty_cycle*10000/freq; + space_width = (unsigned long) 1000000L/freq-pulse_width; + if (pulse_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY) + pulse_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY; + if (space_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY) + space_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY; + break; +#endif + default: + retval = -ENOIOCTLCMD; + + } + + if (retval) + return retval; + if (cmd == LIRC_SET_REC_MODE) { + if (value != LIRC_MODE_MODE2) + retval = -ENOSYS; + } else if (cmd == LIRC_SET_SEND_MODE) { + if (value != LIRC_MODE_PULSE) + retval = -ENOSYS; + } + + return retval; +} + +static void add_read_queue(int flag, unsigned long val) +{ + unsigned int new_rx_tail; + int newval; + + dprintk("add flag %d with val %lu\n", flag, val); + + newval = val & PULSE_MASK; + + /* + * statistically, pulses are ~TIME_CONST/2 too long. we could + * maybe make this more exact, but this is good enough + */ + if (flag) { + /* pulse */ + if (newval > TIME_CONST/2) + newval -= TIME_CONST/2; + else /* should not ever happen */ + newval = 1; + newval |= PULSE_BIT; + } else { + newval += TIME_CONST/2; + } + new_rx_tail = (rx_tail + 1) & (RBUF_LEN - 1); + if (new_rx_tail == rx_head) { + dprintk("Buffer overrun.\n"); + return; + } + rx_buf[rx_tail] = newval; + rx_tail = new_rx_tail; + wake_up_interruptible(&lirc_read_queue); +} + +static const struct file_operations lirc_fops = { + .owner = THIS_MODULE, + .read = lirc_read, + .write = lirc_write, + .poll = lirc_poll, + .unlocked_ioctl = lirc_ioctl, + .open = lirc_dev_fop_open, + .release = lirc_dev_fop_close, +}; + +static int set_use_inc(void *data) +{ + return 0; +} + +static void set_use_dec(void *data) +{ +} + +static struct lirc_driver driver = { + .name = LIRC_DRIVER_NAME, + .minor = -1, + .code_length = 1, + .sample_rate = 0, + .data = NULL, + .add_to_buf = NULL, + .set_use_inc = set_use_inc, + .set_use_dec = set_use_dec, + .fops = &lirc_fops, + .dev = NULL, + .owner = THIS_MODULE, +}; + + +static int init_chrdev(void) +{ + driver.minor = lirc_register_driver(&driver); + if (driver.minor < 0) { + printk(KERN_ERR LIRC_DRIVER_NAME ": init_chrdev() failed.\n"); + return -EIO; + } + return 0; +} + +static void drop_chrdev(void) +{ + lirc_unregister_driver(driver.minor); +} + +/* SECTION: Hardware */ +static long delta(struct timeval *tv1, struct timeval *tv2) +{ + unsigned long deltv; + + deltv = tv2->tv_sec - tv1->tv_sec; + if (deltv > 15) + deltv = 0xFFFFFF; + else + deltv = deltv*1000000 + + tv2->tv_usec - + tv1->tv_usec; + return deltv; +} + +static void sir_timeout(unsigned long data) +{ + /* + * if last received signal was a pulse, but receiving stopped + * within the 9 bit frame, we need to finish this pulse and + * simulate a signal change to from pulse to space. Otherwise + * upper layers will receive two sequences next time. + */ + + unsigned long flags; + unsigned long pulse_end; + + /* avoid interference with interrupt */ + spin_lock_irqsave(&timer_lock, flags); + if (last_value) { +#ifndef LIRC_ON_SA1100 + /* clear unread bits in UART and restart */ + outb(UART_FCR_CLEAR_RCVR, io + UART_FCR); +#endif + /* determine 'virtual' pulse end: */ + pulse_end = delta(&last_tv, &last_intr_tv); + dprintk("timeout add %d for %lu usec\n", last_value, pulse_end); + add_read_queue(last_value, pulse_end); + last_value = 0; + last_tv = last_intr_tv; + } + spin_unlock_irqrestore(&timer_lock, flags); +} + +static irqreturn_t sir_interrupt(int irq, void *dev_id) +{ + unsigned char data; + struct timeval curr_tv; + static unsigned long deltv; +#ifdef LIRC_ON_SA1100 + int status; + static int n; + + status = Ser2UTSR0; + /* + * Deal with any receive errors first. The bytes in error may be + * the only bytes in the receive FIFO, so we do this first. + */ + while (status & UTSR0_EIF) { + int bstat; + + if (debug) { + dprintk("EIF\n"); + bstat = Ser2UTSR1; + + if (bstat & UTSR1_FRE) + dprintk("frame error\n"); + if (bstat & UTSR1_ROR) + dprintk("receive fifo overrun\n"); + if (bstat & UTSR1_PRE) + dprintk("parity error\n"); + } + + bstat = Ser2UTDR; + n++; + status = Ser2UTSR0; + } + + if (status & (UTSR0_RFS | UTSR0_RID)) { + do_gettimeofday(&curr_tv); + deltv = delta(&last_tv, &curr_tv); + do { + data = Ser2UTDR; + dprintk("%d data: %u\n", n, (unsigned int) data); + n++; + } while (status & UTSR0_RID && /* do not empty fifo in order to + * get UTSR0_RID in any case */ + Ser2UTSR1 & UTSR1_RNE); /* data ready */ + + if (status&UTSR0_RID) { + add_read_queue(0 , deltv - n * TIME_CONST); /*space*/ + add_read_queue(1, n * TIME_CONST); /*pulse*/ + n = 0; + last_tv = curr_tv; + } + } + + if (status & UTSR0_TFS) + printk(KERN_ERR "transmit fifo not full, shouldn't happen\n"); + + /* We must clear certain bits. */ + status &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB); + if (status) + Ser2UTSR0 = status; +#else + unsigned long deltintrtv; + unsigned long flags; + int iir, lsr; + + while ((iir = inb(io + UART_IIR) & UART_IIR_ID)) { + switch (iir&UART_IIR_ID) { /* FIXME toto treba preriedit */ + case UART_IIR_MSI: + (void) inb(io + UART_MSR); + break; + case UART_IIR_RLSI: + (void) inb(io + UART_LSR); + break; + case UART_IIR_THRI: +#if 0 + if (lsr & UART_LSR_THRE) /* FIFO is empty */ + outb(data, io + UART_TX) +#endif + break; + case UART_IIR_RDI: + /* avoid interference with timer */ + spin_lock_irqsave(&timer_lock, flags); + do { + del_timer(&timerlist); + data = inb(io + UART_RX); + do_gettimeofday(&curr_tv); + deltv = delta(&last_tv, &curr_tv); + deltintrtv = delta(&last_intr_tv, &curr_tv); + dprintk("t %lu, d %d\n", deltintrtv, (int)data); + /* + * if nothing came in last X cycles, + * it was gap + */ + if (deltintrtv > TIME_CONST * threshold) { + if (last_value) { + dprintk("GAP\n"); + /* simulate signal change */ + add_read_queue(last_value, + deltv - + deltintrtv); + last_value = 0; + last_tv.tv_sec = + last_intr_tv.tv_sec; + last_tv.tv_usec = + last_intr_tv.tv_usec; + deltv = deltintrtv; + } + } + data = 1; + if (data ^ last_value) { + /* + * deltintrtv > 2*TIME_CONST, remember? + * the other case is timeout + */ + add_read_queue(last_value, + deltv-TIME_CONST); + last_value = data; + last_tv = curr_tv; + if (last_tv.tv_usec >= TIME_CONST) { + last_tv.tv_usec -= TIME_CONST; + } else { + last_tv.tv_sec--; + last_tv.tv_usec += 1000000 - + TIME_CONST; + } + } + last_intr_tv = curr_tv; + if (data) { + /* + * start timer for end of + * sequence detection + */ + timerlist.expires = jiffies + + SIR_TIMEOUT; + add_timer(&timerlist); + } + + lsr = inb(io + UART_LSR); + } while (lsr & UART_LSR_DR); /* data ready */ + spin_unlock_irqrestore(&timer_lock, flags); + break; + default: + break; + } + } +#endif + return IRQ_RETVAL(IRQ_HANDLED); +} + +#ifdef LIRC_ON_SA1100 +static void send_pulse(unsigned long length) +{ + unsigned long k, delay; + int flag; + + if (length == 0) + return; + /* + * this won't give us the carrier frequency we really want + * due to integer arithmetic, but we can accept this inaccuracy + */ + + for (k = flag = 0; k < length; k += delay, flag = !flag) { + if (flag) { + off(); + delay = space_width; + } else { + on(); + delay = pulse_width; + } + safe_udelay(delay); + } + off(); +} + +static void send_space(unsigned long length) +{ + if (length == 0) + return; + off(); + safe_udelay(length); +} +#else +static void send_space(unsigned long len) +{ + safe_udelay(len); +} + +static void send_pulse(unsigned long len) +{ + long bytes_out = len / TIME_CONST; + long time_left; + + time_left = (long)len - (long)bytes_out * (long)TIME_CONST; + if (bytes_out == 0) { + bytes_out++; + time_left = 0; + } + while (bytes_out--) { + outb(PULSE, io + UART_TX); + /* FIXME treba seriozne cakanie z char/serial.c */ + while (!(inb(io + UART_LSR) & UART_LSR_THRE)) + ; + } +#if 0 + if (time_left > 0) + safe_udelay(time_left); +#endif +} +#endif + +#ifdef CONFIG_SA1100_COLLIE +static int sa1100_irda_set_power_collie(int state) +{ + if (state) { + /* + * 0 - off + * 1 - short range, lowest power + * 2 - medium range, medium power + * 3 - maximum range, high power + */ + ucb1200_set_io_direction(TC35143_GPIO_IR_ON, + TC35143_IODIR_OUTPUT); + ucb1200_set_io(TC35143_GPIO_IR_ON, TC35143_IODAT_LOW); + udelay(100); + } else { + /* OFF */ + ucb1200_set_io_direction(TC35143_GPIO_IR_ON, + TC35143_IODIR_OUTPUT); + ucb1200_set_io(TC35143_GPIO_IR_ON, TC35143_IODAT_HIGH); + } + return 0; +} +#endif + +static int init_hardware(void) +{ + unsigned long flags; + + spin_lock_irqsave(&hardware_lock, flags); + /* reset UART */ +#ifdef LIRC_ON_SA1100 +#ifdef CONFIG_SA1100_BITSY + if (machine_is_bitsy()) { + printk(KERN_INFO "Power on IR module\n"); + set_bitsy_egpio(EGPIO_BITSY_IR_ON); + } +#endif +#ifdef CONFIG_SA1100_COLLIE + sa1100_irda_set_power_collie(3); /* power on */ +#endif + sr.hscr0 = Ser2HSCR0; + + sr.utcr0 = Ser2UTCR0; + sr.utcr1 = Ser2UTCR1; + sr.utcr2 = Ser2UTCR2; + sr.utcr3 = Ser2UTCR3; + sr.utcr4 = Ser2UTCR4; + + sr.utdr = Ser2UTDR; + sr.utsr0 = Ser2UTSR0; + sr.utsr1 = Ser2UTSR1; + + /* configure GPIO */ + /* output */ + PPDR |= PPC_TXD2; + PSDR |= PPC_TXD2; + /* set output to 0 */ + off(); + + /* Enable HP-SIR modulation, and ensure that the port is disabled. */ + Ser2UTCR3 = 0; + Ser2HSCR0 = sr.hscr0 & (~HSCR0_HSSP); + + /* clear status register to prevent unwanted interrupts */ + Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB); + + /* 7N1 */ + Ser2UTCR0 = UTCR0_1StpBit|UTCR0_7BitData; + /* 115200 */ + Ser2UTCR1 = 0; + Ser2UTCR2 = 1; + /* use HPSIR, 1.6 usec pulses */ + Ser2UTCR4 = UTCR4_HPSIR|UTCR4_Z1_6us; + + /* enable receiver, receive fifo interrupt */ + Ser2UTCR3 = UTCR3_RXE|UTCR3_RIE; + + /* clear status register to prevent unwanted interrupts */ + Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB); + +#elif defined(LIRC_SIR_TEKRAM) + /* disable FIFO */ + soutp(UART_FCR, + UART_FCR_CLEAR_RCVR| + UART_FCR_CLEAR_XMIT| + UART_FCR_TRIGGER_1); + + /* Set DLAB 0. */ + soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); + + /* First of all, disable all interrupts */ + soutp(UART_IER, sinp(UART_IER) & + (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); + + /* Set DLAB 1. */ + soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB); + + /* Set divisor to 12 => 9600 Baud */ + soutp(UART_DLM, 0); + soutp(UART_DLL, 12); + + /* Set DLAB 0. */ + soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); + + /* power supply */ + soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); + safe_udelay(50*1000); + + /* -DTR low -> reset PIC */ + soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2); + udelay(1*1000); + + soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); + udelay(100); + + + /* -RTS low -> send control byte */ + soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2); + udelay(7); + soutp(UART_TX, TEKRAM_115200|TEKRAM_PW); + + /* one byte takes ~1042 usec to transmit at 9600,8N1 */ + udelay(1500); + + /* back to normal operation */ + soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); + udelay(50); + + udelay(1500); + + /* read previous control byte */ + printk(KERN_INFO LIRC_DRIVER_NAME + ": 0x%02x\n", sinp(UART_RX)); + + /* Set DLAB 1. */ + soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB); + + /* Set divisor to 1 => 115200 Baud */ + soutp(UART_DLM, 0); + soutp(UART_DLL, 1); + + /* Set DLAB 0, 8 Bit */ + soutp(UART_LCR, UART_LCR_WLEN8); + /* enable interrupts */ + soutp(UART_IER, sinp(UART_IER)|UART_IER_RDI); +#else + outb(0, io + UART_MCR); + outb(0, io + UART_IER); + /* init UART */ + /* set DLAB, speed = 115200 */ + outb(UART_LCR_DLAB | UART_LCR_WLEN7, io + UART_LCR); + outb(1, io + UART_DLL); outb(0, io + UART_DLM); + /* 7N1+start = 9 bits at 115200 ~ 3 bits at 44000 */ + outb(UART_LCR_WLEN7, io + UART_LCR); + /* FIFO operation */ + outb(UART_FCR_ENABLE_FIFO, io + UART_FCR); + /* interrupts */ + /* outb(UART_IER_RLSI|UART_IER_RDI|UART_IER_THRI, io + UART_IER); */ + outb(UART_IER_RDI, io + UART_IER); + /* turn on UART */ + outb(UART_MCR_DTR|UART_MCR_RTS|UART_MCR_OUT2, io + UART_MCR); +#ifdef LIRC_SIR_ACTISYS_ACT200L + init_act200(); +#elif defined(LIRC_SIR_ACTISYS_ACT220L) + init_act220(); +#endif +#endif + spin_unlock_irqrestore(&hardware_lock, flags); + return 0; +} + +static void drop_hardware(void) +{ + unsigned long flags; + + spin_lock_irqsave(&hardware_lock, flags); + +#ifdef LIRC_ON_SA1100 + Ser2UTCR3 = 0; + + Ser2UTCR0 = sr.utcr0; + Ser2UTCR1 = sr.utcr1; + Ser2UTCR2 = sr.utcr2; + Ser2UTCR4 = sr.utcr4; + Ser2UTCR3 = sr.utcr3; + + Ser2HSCR0 = sr.hscr0; +#ifdef CONFIG_SA1100_BITSY + if (machine_is_bitsy()) + clr_bitsy_egpio(EGPIO_BITSY_IR_ON); +#endif +#ifdef CONFIG_SA1100_COLLIE + sa1100_irda_set_power_collie(0); /* power off */ +#endif +#else + /* turn off interrupts */ + outb(0, io + UART_IER); +#endif + spin_unlock_irqrestore(&hardware_lock, flags); +} + +/* SECTION: Initialisation */ + +static int init_port(void) +{ + int retval; + + /* get I/O port access and IRQ line */ +#ifndef LIRC_ON_SA1100 + if (request_region(io, 8, LIRC_DRIVER_NAME) == NULL) { + printk(KERN_ERR LIRC_DRIVER_NAME + ": i/o port 0x%.4x already in use.\n", io); + return -EBUSY; + } +#endif + retval = request_irq(irq, sir_interrupt, IRQF_DISABLED, + LIRC_DRIVER_NAME, NULL); + if (retval < 0) { +# ifndef LIRC_ON_SA1100 + release_region(io, 8); +# endif + printk(KERN_ERR LIRC_DRIVER_NAME + ": IRQ %d already in use.\n", + irq); + return retval; + } +#ifndef LIRC_ON_SA1100 + printk(KERN_INFO LIRC_DRIVER_NAME + ": I/O port 0x%.4x, IRQ %d.\n", + io, irq); +#endif + + init_timer(&timerlist); + timerlist.function = sir_timeout; + timerlist.data = 0xabadcafe; + + return 0; +} + +static void drop_port(void) +{ + free_irq(irq, NULL); + del_timer_sync(&timerlist); +#ifndef LIRC_ON_SA1100 + release_region(io, 8); +#endif +} + +#ifdef LIRC_SIR_ACTISYS_ACT200L +/* Crystal/Cirrus CS8130 IR transceiver, used in Actisys Act200L dongle */ +/* some code borrowed from Linux IRDA driver */ + +/* Register 0: Control register #1 */ +#define ACT200L_REG0 0x00 +#define ACT200L_TXEN 0x01 /* Enable transmitter */ +#define ACT200L_RXEN 0x02 /* Enable receiver */ +#define ACT200L_ECHO 0x08 /* Echo control chars */ + +/* Register 1: Control register #2 */ +#define ACT200L_REG1 0x10 +#define ACT200L_LODB 0x01 /* Load new baud rate count value */ +#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */ + +/* Register 3: Transmit mode register #2 */ +#define ACT200L_REG3 0x30 +#define ACT200L_B0 0x01 /* DataBits, 0=6, 1=7, 2=8, 3=9(8P) */ +#define ACT200L_B1 0x02 /* DataBits, 0=6, 1=7, 2=8, 3=9(8P) */ +#define ACT200L_CHSY 0x04 /* StartBit Synced 0=bittime, 1=startbit */ + +/* Register 4: Output Power register */ +#define ACT200L_REG4 0x40 +#define ACT200L_OP0 0x01 /* Enable LED1C output */ +#define ACT200L_OP1 0x02 /* Enable LED2C output */ +#define ACT200L_BLKR 0x04 + +/* Register 5: Receive Mode register */ +#define ACT200L_REG5 0x50 +#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */ + /*.. other various IRDA bit modes, and TV remote modes..*/ + +/* Register 6: Receive Sensitivity register #1 */ +#define ACT200L_REG6 0x60 +#define ACT200L_RS0 0x01 /* receive threshold bit 0 */ +#define ACT200L_RS1 0x02 /* receive threshold bit 1 */ + +/* Register 7: Receive Sensitivity register #2 */ +#define ACT200L_REG7 0x70 +#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */ + +/* Register 8,9: Baud Rate Divider register #1,#2 */ +#define ACT200L_REG8 0x80 +#define ACT200L_REG9 0x90 + +#define ACT200L_2400 0x5f +#define ACT200L_9600 0x17 +#define ACT200L_19200 0x0b +#define ACT200L_38400 0x05 +#define ACT200L_57600 0x03 +#define ACT200L_115200 0x01 + +/* Register 13: Control register #3 */ +#define ACT200L_REG13 0xd0 +#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */ + +/* Register 15: Status register */ +#define ACT200L_REG15 0xf0 + +/* Register 21: Control register #4 */ +#define ACT200L_REG21 0x50 +#define ACT200L_EXCK 0x02 /* Disable clock output driver */ +#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */ + +static void init_act200(void) +{ + int i; + __u8 control[] = { + ACT200L_REG15, + ACT200L_REG13 | ACT200L_SHDW, + ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL, + ACT200L_REG13, + ACT200L_REG7 | ACT200L_ENPOS, + ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1, + ACT200L_REG5 | ACT200L_RWIDL, + ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR, + ACT200L_REG3 | ACT200L_B0, + ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN, + ACT200L_REG8 | (ACT200L_115200 & 0x0f), + ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f), + ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE + }; + + /* Set DLAB 1. */ + soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8); + + /* Set divisor to 12 => 9600 Baud */ + soutp(UART_DLM, 0); + soutp(UART_DLL, 12); + + /* Set DLAB 0. */ + soutp(UART_LCR, UART_LCR_WLEN8); + /* Set divisor to 12 => 9600 Baud */ + + /* power supply */ + soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); + for (i = 0; i < 50; i++) + safe_udelay(1000); + + /* Reset the dongle : set RTS low for 25 ms */ + soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2); + for (i = 0; i < 25; i++) + udelay(1000); + + soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); + udelay(100); + + /* Clear DTR and set RTS to enter command mode */ + soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2); + udelay(7); + + /* send out the control register settings for 115K 7N1 SIR operation */ + for (i = 0; i < sizeof(control); i++) { + soutp(UART_TX, control[i]); + /* one byte takes ~1042 usec to transmit at 9600,8N1 */ + udelay(1500); + } + + /* back to normal operation */ + soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); + udelay(50); + + udelay(1500); + soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB); + + /* Set DLAB 1. */ + soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN7); + + /* Set divisor to 1 => 115200 Baud */ + soutp(UART_DLM, 0); + soutp(UART_DLL, 1); + + /* Set DLAB 0. */ + soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); + + /* Set DLAB 0, 7 Bit */ + soutp(UART_LCR, UART_LCR_WLEN7); + + /* enable interrupts */ + soutp(UART_IER, sinp(UART_IER)|UART_IER_RDI); +} +#endif + +#ifdef LIRC_SIR_ACTISYS_ACT220L +/* + * Derived from linux IrDA driver (net/irda/actisys.c) + * Drop me a mail for any kind of comment: maxx@spaceboyz.net + */ + +void init_act220(void) +{ + int i; + + /* DLAB 1 */ + soutp(UART_LCR, UART_LCR_DLAB|UART_LCR_WLEN7); + + /* 9600 baud */ + soutp(UART_DLM, 0); + soutp(UART_DLL, 12); + + /* DLAB 0 */ + soutp(UART_LCR, UART_LCR_WLEN7); + + /* reset the dongle, set DTR low for 10us */ + soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2); + udelay(10); + + /* back to normal (still 9600) */ + soutp(UART_MCR, UART_MCR_DTR|UART_MCR_RTS|UART_MCR_OUT2); + + /* + * send RTS pulses until we reach 115200 + * i hope this is really the same for act220l/act220l+ + */ + for (i = 0; i < 3; i++) { + udelay(10); + /* set RTS low for 10 us */ + soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2); + udelay(10); + /* set RTS high for 10 us */ + soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); + } + + /* back to normal operation */ + udelay(1500); /* better safe than sorry ;) */ + + /* Set DLAB 1. */ + soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN7); + + /* Set divisor to 1 => 115200 Baud */ + soutp(UART_DLM, 0); + soutp(UART_DLL, 1); + + /* Set DLAB 0, 7 Bit */ + /* The dongle doesn't seem to have any problems with operation at 7N1 */ + soutp(UART_LCR, UART_LCR_WLEN7); + + /* enable interrupts */ + soutp(UART_IER, UART_IER_RDI); +} +#endif + +static int init_lirc_sir(void) +{ + int retval; + + init_waitqueue_head(&lirc_read_queue); + retval = init_port(); + if (retval < 0) + return retval; + init_hardware(); + printk(KERN_INFO LIRC_DRIVER_NAME + ": Installed.\n"); + return 0; +} + + +static int __init lirc_sir_init(void) +{ + int retval; + + retval = init_chrdev(); + if (retval < 0) + return retval; + retval = init_lirc_sir(); + if (retval) { + drop_chrdev(); + return retval; + } + return 0; +} + +static void __exit lirc_sir_exit(void) +{ + drop_hardware(); + drop_chrdev(); + drop_port(); + printk(KERN_INFO LIRC_DRIVER_NAME ": Uninstalled.\n"); +} + +module_init(lirc_sir_init); +module_exit(lirc_sir_exit); + +#ifdef LIRC_SIR_TEKRAM +MODULE_DESCRIPTION("Infrared receiver driver for Tekram Irmate 210"); +MODULE_AUTHOR("Christoph Bartelmus"); +#elif defined(LIRC_ON_SA1100) +MODULE_DESCRIPTION("LIRC driver for StrongARM SA1100 embedded microprocessor"); +MODULE_AUTHOR("Christoph Bartelmus"); +#elif defined(LIRC_SIR_ACTISYS_ACT200L) +MODULE_DESCRIPTION("LIRC driver for Actisys Act200L"); +MODULE_AUTHOR("Karl Bongers"); +#elif defined(LIRC_SIR_ACTISYS_ACT220L) +MODULE_DESCRIPTION("LIRC driver for Actisys Act220L(+)"); +MODULE_AUTHOR("Jan Roemisch"); +#else +MODULE_DESCRIPTION("Infrared receiver driver for SIR type serial ports"); +MODULE_AUTHOR("Milan Pikula"); +#endif +MODULE_LICENSE("GPL"); + +#ifdef LIRC_ON_SA1100 +module_param(irq, int, S_IRUGO); +MODULE_PARM_DESC(irq, "Interrupt (16)"); +#else +module_param(io, int, S_IRUGO); +MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)"); + +module_param(irq, int, S_IRUGO); +MODULE_PARM_DESC(irq, "Interrupt (4 or 3)"); + +module_param(threshold, int, S_IRUGO); +MODULE_PARM_DESC(threshold, "space detection threshold (3)"); +#endif + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging messages"); diff --git a/drivers/staging/lirc/lirc_streamzap.c b/drivers/staging/lirc/lirc_streamzap.c new file mode 100644 index 0000000..be09c10 --- /dev/null +++ b/drivers/staging/lirc/lirc_streamzap.c @@ -0,0 +1,821 @@ +/* + * Streamzap Remote Control driver + * + * Copyright (c) 2005 Christoph Bartelmus + * + * This driver was based on the work of Greg Wickham and Adrian + * Dewhurst. It was substantially rewritten to support correct signal + * gaps and now maintains a delay buffer, which is used to present + * consistent timing behaviour to user space applications. Without the + * delay buffer an ugly hack would be required in lircd, which can + * cause sluggish signal decoding in certain situations. + * + * This driver is based on the USB skeleton driver packaged with the + * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRIVER_VERSION "1.28" +#define DRIVER_NAME "lirc_streamzap" +#define DRIVER_DESC "Streamzap Remote Control driver" + +static int debug; + +#define USB_STREAMZAP_VENDOR_ID 0x0e9c +#define USB_STREAMZAP_PRODUCT_ID 0x0000 + +/* Use our own dbg macro */ +#define dprintk(fmt, args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG DRIVER_NAME "[%d]: " \ + fmt "\n", ## args); \ + } while (0) + +/* table of devices that work with this driver */ +static struct usb_device_id streamzap_table[] = { + /* Streamzap Remote Control */ + { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) }, + /* Terminating entry */ + { } +}; + +MODULE_DEVICE_TABLE(usb, streamzap_table); + +#define STREAMZAP_PULSE_MASK 0xf0 +#define STREAMZAP_SPACE_MASK 0x0f +#define STREAMZAP_TIMEOUT 0xff +#define STREAMZAP_RESOLUTION 256 + +/* number of samples buffered */ +#define STREAMZAP_BUF_LEN 128 + +enum StreamzapDecoderState { + PulseSpace, + FullPulse, + FullSpace, + IgnorePulse +}; + +/* Structure to hold all of our device specific stuff + * + * some remarks regarding locking: + * theoretically this struct can be accessed from three threads: + * + * - from lirc_dev through set_use_inc/set_use_dec + * + * - from the USB layer throuh probe/disconnect/irq + * + * Careful placement of lirc_register_driver/lirc_unregister_driver + * calls will prevent conflicts. lirc_dev makes sure that + * set_use_inc/set_use_dec are not being executed and will not be + * called after lirc_unregister_driver returns. + * + * - by the timer callback + * + * The timer is only running when the device is connected and the + * LIRC device is open. Making sure the timer is deleted by + * set_use_dec will make conflicts impossible. + */ +struct usb_streamzap { + + /* usb */ + /* save off the usb device pointer */ + struct usb_device *udev; + /* the interface for this device */ + struct usb_interface *interface; + + /* buffer & dma */ + unsigned char *buf_in; + dma_addr_t dma_in; + unsigned int buf_in_len; + + struct usb_endpoint_descriptor *endpoint; + + /* IRQ */ + struct urb *urb_in; + + /* lirc */ + struct lirc_driver *driver; + struct lirc_buffer *delay_buf; + + /* timer used to support delay buffering */ + struct timer_list delay_timer; + int timer_running; + spinlock_t timer_lock; + + /* tracks whether we are currently receiving some signal */ + int idle; + /* sum of signal lengths received since signal start */ + unsigned long sum; + /* start time of signal; necessary for gap tracking */ + struct timeval signal_last; + struct timeval signal_start; + enum StreamzapDecoderState decoder_state; + struct timer_list flush_timer; + int flush; + int in_use; + int timeout_enabled; +}; + + +/* local function prototypes */ +static int streamzap_probe(struct usb_interface *interface, + const struct usb_device_id *id); +static void streamzap_disconnect(struct usb_interface *interface); +static void usb_streamzap_irq(struct urb *urb); +static int streamzap_use_inc(void *data); +static void streamzap_use_dec(void *data); +static long streamzap_ioctl(struct file *filep, unsigned int cmd, + unsigned long arg); +static int streamzap_suspend(struct usb_interface *intf, pm_message_t message); +static int streamzap_resume(struct usb_interface *intf); + +/* usb specific object needed to register this driver with the usb subsystem */ + +static struct usb_driver streamzap_driver = { + .name = DRIVER_NAME, + .probe = streamzap_probe, + .disconnect = streamzap_disconnect, + .suspend = streamzap_suspend, + .resume = streamzap_resume, + .id_table = streamzap_table, +}; + +static void stop_timer(struct usb_streamzap *sz) +{ + unsigned long flags; + + spin_lock_irqsave(&sz->timer_lock, flags); + if (sz->timer_running) { + sz->timer_running = 0; + spin_unlock_irqrestore(&sz->timer_lock, flags); + del_timer_sync(&sz->delay_timer); + } else { + spin_unlock_irqrestore(&sz->timer_lock, flags); + } +} + +static void flush_timeout(unsigned long arg) +{ + struct usb_streamzap *sz = (struct usb_streamzap *) arg; + + /* finally start accepting data */ + sz->flush = 0; +} +static void delay_timeout(unsigned long arg) +{ + unsigned long flags; + /* deliver data every 10 ms */ + static unsigned long timer_inc = + (10000/(1000000/HZ)) == 0 ? 1 : (10000/(1000000/HZ)); + struct usb_streamzap *sz = (struct usb_streamzap *) arg; + int data; + + spin_lock_irqsave(&sz->timer_lock, flags); + + if (!lirc_buffer_empty(sz->delay_buf) && + !lirc_buffer_full(sz->driver->rbuf)) { + lirc_buffer_read(sz->delay_buf, (unsigned char *) &data); + lirc_buffer_write(sz->driver->rbuf, (unsigned char *) &data); + } + if (!lirc_buffer_empty(sz->delay_buf)) { + while (lirc_buffer_available(sz->delay_buf) < + STREAMZAP_BUF_LEN / 2 && + !lirc_buffer_full(sz->driver->rbuf)) { + lirc_buffer_read(sz->delay_buf, + (unsigned char *) &data); + lirc_buffer_write(sz->driver->rbuf, + (unsigned char *) &data); + } + if (sz->timer_running) { + sz->delay_timer.expires = jiffies + timer_inc; + add_timer(&sz->delay_timer); + } + } else { + sz->timer_running = 0; + } + + if (!lirc_buffer_empty(sz->driver->rbuf)) + wake_up(&sz->driver->rbuf->wait_poll); + + spin_unlock_irqrestore(&sz->timer_lock, flags); +} + +static void flush_delay_buffer(struct usb_streamzap *sz) +{ + int data; + int empty = 1; + + while (!lirc_buffer_empty(sz->delay_buf)) { + empty = 0; + lirc_buffer_read(sz->delay_buf, (unsigned char *) &data); + if (!lirc_buffer_full(sz->driver->rbuf)) { + lirc_buffer_write(sz->driver->rbuf, + (unsigned char *) &data); + } else { + dprintk("buffer overflow", sz->driver->minor); + } + } + if (!empty) + wake_up(&sz->driver->rbuf->wait_poll); +} + +static void push(struct usb_streamzap *sz, unsigned char *data) +{ + unsigned long flags; + + spin_lock_irqsave(&sz->timer_lock, flags); + if (lirc_buffer_full(sz->delay_buf)) { + int read_data; + + lirc_buffer_read(sz->delay_buf, + (unsigned char *) &read_data); + if (!lirc_buffer_full(sz->driver->rbuf)) { + lirc_buffer_write(sz->driver->rbuf, + (unsigned char *) &read_data); + } else { + dprintk("buffer overflow", sz->driver->minor); + } + } + + lirc_buffer_write(sz->delay_buf, data); + + if (!sz->timer_running) { + sz->delay_timer.expires = jiffies + HZ/10; + add_timer(&sz->delay_timer); + sz->timer_running = 1; + } + + spin_unlock_irqrestore(&sz->timer_lock, flags); +} + +static void push_full_pulse(struct usb_streamzap *sz, + unsigned char value) +{ + int pulse; + + if (sz->idle) { + long deltv; + int tmp; + + sz->signal_last = sz->signal_start; + do_gettimeofday(&sz->signal_start); + + deltv = sz->signal_start.tv_sec-sz->signal_last.tv_sec; + if (deltv > 15) { + /* really long time */ + tmp = LIRC_SPACE(LIRC_VALUE_MASK); + } else { + tmp = (int) (deltv*1000000+ + sz->signal_start.tv_usec - + sz->signal_last.tv_usec); + tmp -= sz->sum; + tmp = LIRC_SPACE(tmp); + } + dprintk("ls %u", sz->driver->minor, tmp); + push(sz, (char *)&tmp); + + sz->idle = 0; + sz->sum = 0; + } + + pulse = ((int) value) * STREAMZAP_RESOLUTION; + pulse += STREAMZAP_RESOLUTION / 2; + sz->sum += pulse; + pulse = LIRC_PULSE(pulse); + + dprintk("p %u", sz->driver->minor, pulse & PULSE_MASK); + push(sz, (char *)&pulse); +} + +static void push_half_pulse(struct usb_streamzap *sz, + unsigned char value) +{ + push_full_pulse(sz, (value & STREAMZAP_PULSE_MASK)>>4); +} + +static void push_full_space(struct usb_streamzap *sz, + unsigned char value) +{ + int space; + + space = ((int) value)*STREAMZAP_RESOLUTION; + space += STREAMZAP_RESOLUTION/2; + sz->sum += space; + space = LIRC_SPACE(space); + dprintk("s %u", sz->driver->minor, space); + push(sz, (char *)&space); +} + +static void push_half_space(struct usb_streamzap *sz, + unsigned char value) +{ + push_full_space(sz, value & STREAMZAP_SPACE_MASK); +} + +/** + * usb_streamzap_irq - IRQ handler + * + * This procedure is invoked on reception of data from + * the usb remote. + */ +static void usb_streamzap_irq(struct urb *urb) +{ + struct usb_streamzap *sz; + int len; + unsigned int i = 0; + + if (!urb) + return; + + sz = urb->context; + len = urb->actual_length; + + switch (urb->status) { + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* + * this urb is terminated, clean up. + * sz might already be invalid at this point + */ + dprintk("urb status: %d", -1, urb->status); + return; + default: + break; + } + + dprintk("received %d", sz->driver->minor, urb->actual_length); + if (!sz->flush) { + for (i = 0; i < urb->actual_length; i++) { + dprintk("%d: %x", sz->driver->minor, + i, (unsigned char) sz->buf_in[i]); + switch (sz->decoder_state) { + case PulseSpace: + if ((sz->buf_in[i]&STREAMZAP_PULSE_MASK) == + STREAMZAP_PULSE_MASK) { + sz->decoder_state = FullPulse; + continue; + } else if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK) + == STREAMZAP_SPACE_MASK) { + push_half_pulse(sz, sz->buf_in[i]); + sz->decoder_state = FullSpace; + continue; + } else { + push_half_pulse(sz, sz->buf_in[i]); + push_half_space(sz, sz->buf_in[i]); + } + break; + case FullPulse: + push_full_pulse(sz, sz->buf_in[i]); + sz->decoder_state = IgnorePulse; + break; + case FullSpace: + if (sz->buf_in[i] == STREAMZAP_TIMEOUT) { + sz->idle = 1; + stop_timer(sz); + if (sz->timeout_enabled) { + int timeout = + LIRC_TIMEOUT + (STREAMZAP_TIMEOUT * + STREAMZAP_RESOLUTION); + push(sz, (char *)&timeout); + } + flush_delay_buffer(sz); + } else + push_full_space(sz, sz->buf_in[i]); + sz->decoder_state = PulseSpace; + break; + case IgnorePulse: + if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK) == + STREAMZAP_SPACE_MASK) { + sz->decoder_state = FullSpace; + continue; + } + push_half_space(sz, sz->buf_in[i]); + sz->decoder_state = PulseSpace; + break; + } + } + } + + usb_submit_urb(urb, GFP_ATOMIC); + + return; +} + +static const struct file_operations streamzap_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = streamzap_ioctl, + .read = lirc_dev_fop_read, + .write = lirc_dev_fop_write, + .poll = lirc_dev_fop_poll, + .open = lirc_dev_fop_open, + .release = lirc_dev_fop_close, +}; + + +/** + * streamzap_probe + * + * Called by usb-core to associated with a candidate device + * On any failure the return value is the ERROR + * On success return 0 + */ +static int streamzap_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *iface_host; + struct usb_streamzap *sz; + struct lirc_driver *driver; + struct lirc_buffer *lirc_buf; + struct lirc_buffer *delay_buf; + char buf[63], name[128] = ""; + int retval = -ENOMEM; + int minor = 0; + + /* Allocate space for device driver specific data */ + sz = kzalloc(sizeof(struct usb_streamzap), GFP_KERNEL); + if (sz == NULL) + return -ENOMEM; + + sz->udev = udev; + sz->interface = interface; + + /* Check to ensure endpoint information matches requirements */ + iface_host = interface->cur_altsetting; + + if (iface_host->desc.bNumEndpoints != 1) { + err("%s: Unexpected desc.bNumEndpoints (%d)", __func__, + iface_host->desc.bNumEndpoints); + retval = -ENODEV; + goto free_sz; + } + + sz->endpoint = &(iface_host->endpoint[0].desc); + if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + != USB_DIR_IN) { + err("%s: endpoint doesn't match input device 02%02x", + __func__, sz->endpoint->bEndpointAddress); + retval = -ENODEV; + goto free_sz; + } + + if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + != USB_ENDPOINT_XFER_INT) { + err("%s: endpoint attributes don't match xfer 02%02x", + __func__, sz->endpoint->bmAttributes); + retval = -ENODEV; + goto free_sz; + } + + if (sz->endpoint->wMaxPacketSize == 0) { + err("%s: endpoint message size==0? ", __func__); + retval = -ENODEV; + goto free_sz; + } + + /* Allocate the USB buffer and IRQ URB */ + + sz->buf_in_len = sz->endpoint->wMaxPacketSize; + sz->buf_in = usb_alloc_coherent(sz->udev, sz->buf_in_len, + GFP_ATOMIC, &sz->dma_in); + if (sz->buf_in == NULL) + goto free_sz; + + sz->urb_in = usb_alloc_urb(0, GFP_KERNEL); + if (sz->urb_in == NULL) + goto free_sz; + + /* Connect this device to the LIRC sub-system */ + driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); + if (!driver) + goto free_sz; + + lirc_buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL); + if (!lirc_buf) + goto free_driver; + if (lirc_buffer_init(lirc_buf, sizeof(int), STREAMZAP_BUF_LEN)) + goto kfree_lirc_buf; + + delay_buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL); + if (!delay_buf) + goto free_lirc_buf; + if (lirc_buffer_init(delay_buf, sizeof(int), STREAMZAP_BUF_LEN)) + goto kfree_delay_buf; + + sz->driver = driver; + strcpy(sz->driver->name, DRIVER_NAME); + sz->driver->minor = -1; + sz->driver->sample_rate = 0; + sz->driver->code_length = sizeof(int) * 8; + sz->driver->features = LIRC_CAN_REC_MODE2 | + LIRC_CAN_GET_REC_RESOLUTION | + LIRC_CAN_SET_REC_TIMEOUT; + sz->driver->data = sz; + sz->driver->min_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION; + sz->driver->max_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION; + sz->driver->rbuf = lirc_buf; + sz->delay_buf = delay_buf; + sz->driver->set_use_inc = &streamzap_use_inc; + sz->driver->set_use_dec = &streamzap_use_dec; + sz->driver->fops = &streamzap_fops; + sz->driver->dev = &interface->dev; + sz->driver->owner = THIS_MODULE; + + sz->idle = 1; + sz->decoder_state = PulseSpace; + init_timer(&sz->delay_timer); + sz->delay_timer.function = delay_timeout; + sz->delay_timer.data = (unsigned long) sz; + sz->timer_running = 0; + spin_lock_init(&sz->timer_lock); + + init_timer(&sz->flush_timer); + sz->flush_timer.function = flush_timeout; + sz->flush_timer.data = (unsigned long) sz; + /* Complete final initialisations */ + + usb_fill_int_urb(sz->urb_in, udev, + usb_rcvintpipe(udev, sz->endpoint->bEndpointAddress), + sz->buf_in, sz->buf_in_len, usb_streamzap_irq, sz, + sz->endpoint->bInterval); + sz->urb_in->transfer_dma = sz->dma_in; + sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + if (udev->descriptor.iManufacturer + && usb_string(udev, udev->descriptor.iManufacturer, + buf, sizeof(buf)) > 0) + strlcpy(name, buf, sizeof(name)); + + if (udev->descriptor.iProduct + && usb_string(udev, udev->descriptor.iProduct, + buf, sizeof(buf)) > 0) + snprintf(name + strlen(name), sizeof(name) - strlen(name), + " %s", buf); + + minor = lirc_register_driver(driver); + + if (minor < 0) + goto free_delay_buf; + + sz->driver->minor = minor; + + usb_set_intfdata(interface, sz); + + printk(KERN_INFO DRIVER_NAME "[%d]: %s on usb%d:%d attached\n", + sz->driver->minor, name, + udev->bus->busnum, sz->udev->devnum); + + return 0; + +free_delay_buf: + lirc_buffer_free(sz->delay_buf); +kfree_delay_buf: + kfree(delay_buf); +free_lirc_buf: + lirc_buffer_free(sz->driver->rbuf); +kfree_lirc_buf: + kfree(lirc_buf); +free_driver: + kfree(driver); +free_sz: + if (retval == -ENOMEM) + err("Out of memory"); + + if (sz) { + usb_free_urb(sz->urb_in); + usb_free_coherent(udev, sz->buf_in_len, sz->buf_in, sz->dma_in); + kfree(sz); + } + + return retval; +} + +static int streamzap_use_inc(void *data) +{ + struct usb_streamzap *sz = data; + + if (!sz) { + dprintk("%s called with no context", -1, __func__); + return -EINVAL; + } + dprintk("set use inc", sz->driver->minor); + + lirc_buffer_clear(sz->driver->rbuf); + lirc_buffer_clear(sz->delay_buf); + + sz->flush_timer.expires = jiffies + HZ; + sz->flush = 1; + add_timer(&sz->flush_timer); + + sz->urb_in->dev = sz->udev; + if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) { + dprintk("open result = -EIO error submitting urb", + sz->driver->minor); + return -EIO; + } + sz->in_use++; + + return 0; +} + +static void streamzap_use_dec(void *data) +{ + struct usb_streamzap *sz = data; + + if (!sz) { + dprintk("%s called with no context", -1, __func__); + return; + } + dprintk("set use dec", sz->driver->minor); + + if (sz->flush) { + sz->flush = 0; + del_timer_sync(&sz->flush_timer); + } + + usb_kill_urb(sz->urb_in); + + stop_timer(sz); + + sz->in_use--; +} + +static long streamzap_ioctl(struct file *filep, unsigned int cmd, + unsigned long arg) +{ + int result = 0; + int val; + struct usb_streamzap *sz = lirc_get_pdata(filep); + + switch (cmd) { + case LIRC_GET_REC_RESOLUTION: + result = put_user(STREAMZAP_RESOLUTION, (unsigned int *) arg); + break; + case LIRC_SET_REC_TIMEOUT: + result = get_user(val, (int *)arg); + if (result == 0) { + if (val == STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION) + sz->timeout_enabled = 1; + else if (val == 0) + sz->timeout_enabled = 0; + else + result = -EINVAL; + } + break; + default: + return lirc_dev_fop_ioctl(filep, cmd, arg); + } + return result; +} + +/** + * streamzap_disconnect + * + * Called by the usb core when the device is removed from the system. + * + * This routine guarantees that the driver will not submit any more urbs + * by clearing dev->udev. It is also supposed to terminate any currently + * active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(), + * does not provide any way to do this. + */ +static void streamzap_disconnect(struct usb_interface *interface) +{ + struct usb_streamzap *sz; + int errnum; + int minor; + + sz = usb_get_intfdata(interface); + + /* unregister from the LIRC sub-system */ + + errnum = lirc_unregister_driver(sz->driver->minor); + if (errnum != 0) + dprintk("error in lirc_unregister: (returned %d)", + sz->driver->minor, errnum); + + lirc_buffer_free(sz->delay_buf); + lirc_buffer_free(sz->driver->rbuf); + + /* unregister from the USB sub-system */ + + usb_free_urb(sz->urb_in); + + usb_free_coherent(sz->udev, sz->buf_in_len, sz->buf_in, sz->dma_in); + + minor = sz->driver->minor; + kfree(sz->driver->rbuf); + kfree(sz->driver); + kfree(sz->delay_buf); + kfree(sz); + + printk(KERN_INFO DRIVER_NAME "[%d]: disconnected\n", minor); +} + +static int streamzap_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usb_streamzap *sz = usb_get_intfdata(intf); + + printk(KERN_INFO DRIVER_NAME "[%d]: suspend\n", sz->driver->minor); + if (sz->in_use) { + if (sz->flush) { + sz->flush = 0; + del_timer_sync(&sz->flush_timer); + } + + stop_timer(sz); + + usb_kill_urb(sz->urb_in); + } + return 0; +} + +static int streamzap_resume(struct usb_interface *intf) +{ + struct usb_streamzap *sz = usb_get_intfdata(intf); + + lirc_buffer_clear(sz->driver->rbuf); + lirc_buffer_clear(sz->delay_buf); + + if (sz->in_use) { + sz->flush_timer.expires = jiffies + HZ; + sz->flush = 1; + add_timer(&sz->flush_timer); + + sz->urb_in->dev = sz->udev; + if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) { + dprintk("open result = -EIO error submitting urb", + sz->driver->minor); + return -EIO; + } + } + return 0; +} + +/** + * usb_streamzap_init + */ +static int __init usb_streamzap_init(void) +{ + int result; + + /* register this driver with the USB subsystem */ + result = usb_register(&streamzap_driver); + + if (result) { + err("usb_register failed. Error number %d", + result); + return result; + } + + printk(KERN_INFO DRIVER_NAME " " DRIVER_VERSION " registered\n"); + return 0; +} + +/** + * usb_streamzap_exit + */ +static void __exit usb_streamzap_exit(void) +{ + usb_deregister(&streamzap_driver); +} + + +module_init(usb_streamzap_init); +module_exit(usb_streamzap_exit); + +MODULE_AUTHOR("Christoph Bartelmus, Greg Wickham, Adrian Dewhurst"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging messages"); diff --git a/drivers/staging/lirc/lirc_ttusbir.c b/drivers/staging/lirc/lirc_ttusbir.c new file mode 100644 index 0000000..e345ab9 --- /dev/null +++ b/drivers/staging/lirc/lirc_ttusbir.c @@ -0,0 +1,396 @@ +/* + * lirc_ttusbir.c + * + * lirc_ttusbir - LIRC device driver for the TechnoTrend USB IR Receiver + * + * Copyright (C) 2007 Stefan Macher + * + * This LIRC driver provides access to the TechnoTrend USB IR Receiver. + * The receiver delivers the IR signal as raw sampled true/false data in + * isochronous USB packets each of size 128 byte. + * Currently the driver reduces the sampling rate by factor of 8 as this + * is still more than enough to decode RC-5 - others should be analyzed. + * But the driver does not rely on RC-5 it should be able to decode every + * IR signal that is not too fast. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +MODULE_DESCRIPTION("TechnoTrend USB IR device driver for LIRC"); +MODULE_AUTHOR("Stefan Macher (st_maker-lirc@yahoo.de)"); +MODULE_LICENSE("GPL"); + +/* #define DEBUG */ +#ifdef DEBUG +#define DPRINTK printk +#else +#define DPRINTK(_x_, a...) +#endif + +/* function declarations */ +static int probe(struct usb_interface *intf, const struct usb_device_id *id); +static void disconnect(struct usb_interface *intf); +static void urb_complete(struct urb *urb); +static int set_use_inc(void *data); +static void set_use_dec(void *data); + +static int num_urbs = 2; +module_param(num_urbs, int, S_IRUGO); +MODULE_PARM_DESC(num_urbs, + "Number of URBs in queue. Try to increase to 4 in case " + "of problems (default: 2; minimum: 2)"); + +/* table of devices that work with this driver */ +static struct usb_device_id device_id_table[] = { + /* TechnoTrend USB IR Receiver */ + { USB_DEVICE(0x0B48, 0x2003) }, + /* Terminating entry */ + { } +}; +MODULE_DEVICE_TABLE(usb, device_id_table); + +/* USB driver definition */ +static struct usb_driver usb_driver = { + .name = "TTUSBIR", + .id_table = &(device_id_table[0]), + .probe = probe, + .disconnect = disconnect, +}; + +/* USB device definition */ +struct ttusbir_device { + struct usb_driver *usb_driver; + struct usb_device *udev; + struct usb_interface *interf; + struct usb_class_driver class_driver; + unsigned int ifnum; /* Interface number to use */ + unsigned int alt_setting; /* alternate setting to use */ + unsigned int endpoint; /* Endpoint to use */ + struct urb **urb; /* num_urb URB pointers*/ + char **buffer; /* 128 byte buffer for each URB */ + struct lirc_buffer rbuf; /* Buffer towards LIRC */ + struct lirc_driver driver; + int minor; + int last_pulse; /* remembers if last received byte was pulse or space */ + int last_num; /* remembers how many last bytes appeared */ + int opened; +}; + +/*** LIRC specific functions ***/ +static int set_use_inc(void *data) +{ + int i, retval; + struct ttusbir_device *ttusbir = data; + + DPRINTK("Sending first URBs\n"); + /* @TODO Do I need to check if I am already opened */ + ttusbir->opened = 1; + + for (i = 0; i < num_urbs; i++) { + retval = usb_submit_urb(ttusbir->urb[i], GFP_KERNEL); + if (retval) { + err("%s: usb_submit_urb failed on urb %d", + __func__, i); + return retval; + } + } + return 0; +} + +static void set_use_dec(void *data) +{ + struct ttusbir_device *ttusbir = data; + + DPRINTK("Device closed\n"); + + ttusbir->opened = 0; +} + +/*** USB specific functions ***/ + +/* + * This mapping table is used to do a very simple filtering of the + * input signal. + * For a value with at least 4 bits set it returns 0xFF otherwise + * 0x00. For faster IR signals this can not be used. But for RC-5 we + * still have about 14 samples per pulse/space, i.e. we sample with 14 + * times higher frequency than the signal frequency + */ +const unsigned char map_table[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF +}; + +static void urb_complete(struct urb *urb) +{ + struct ttusbir_device *ttusbir; + unsigned char *buf; + int i; + int l; + + ttusbir = urb->context; + + if (!ttusbir->opened) + return; + + buf = (unsigned char *)urb->transfer_buffer; + + for (i = 0; i < 128; i++) { + /* Here we do the filtering and some kind of down sampling */ + buf[i] = ~map_table[buf[i]]; + if (ttusbir->last_pulse == buf[i]) { + if (ttusbir->last_num < PULSE_MASK/63) + ttusbir->last_num++; + /* + * else we are in a idle period and do not need to + * increment any longer + */ + } else { + l = ttusbir->last_num * 62; /* about 62 = us/byte */ + if (ttusbir->last_pulse) /* pulse or space? */ + l |= PULSE_BIT; + if (!lirc_buffer_full(&ttusbir->rbuf)) { + lirc_buffer_write(&ttusbir->rbuf, (void *)&l); + wake_up_interruptible(&ttusbir->rbuf.wait_poll); + } + ttusbir->last_num = 0; + ttusbir->last_pulse = buf[i]; + } + } + usb_submit_urb(urb, GFP_ATOMIC); /* keep data rolling :-) */ +} + +/* + * Called whenever the USB subsystem thinks we could be the right driver + * to handle this device + */ +static int probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + int alt_set, endp; + int found = 0; + int i, j; + int struct_size; + struct usb_host_interface *host_interf; + struct usb_interface_descriptor *interf_desc; + struct usb_host_endpoint *host_endpoint; + struct ttusbir_device *ttusbir; + + DPRINTK("Module ttusbir probe\n"); + + /* To reduce memory fragmentation we use only one allocation */ + struct_size = sizeof(struct ttusbir_device) + + (sizeof(struct urb *) * num_urbs) + + (sizeof(char *) * num_urbs) + + (num_urbs * 128); + ttusbir = kzalloc(struct_size, GFP_KERNEL); + if (!ttusbir) + return -ENOMEM; + + ttusbir->urb = (struct urb **)((char *)ttusbir + + sizeof(struct ttusbir_device)); + ttusbir->buffer = (char **)((char *)ttusbir->urb + + (sizeof(struct urb *) * num_urbs)); + for (i = 0; i < num_urbs; i++) + ttusbir->buffer[i] = (char *)ttusbir->buffer + + (sizeof(char *)*num_urbs) + (i * 128); + + ttusbir->usb_driver = &usb_driver; + ttusbir->alt_setting = -1; + /* @TODO check if error can be returned */ + ttusbir->udev = usb_get_dev(interface_to_usbdev(intf)); + ttusbir->interf = intf; + ttusbir->last_pulse = 0x00; + ttusbir->last_num = 0; + + /* + * Now look for interface setting we can handle + * We are searching for the alt setting where end point + * 0x82 has max packet size 16 + */ + for (alt_set = 0; alt_set < intf->num_altsetting && !found; alt_set++) { + host_interf = &intf->altsetting[alt_set]; + interf_desc = &host_interf->desc; + for (endp = 0; endp < interf_desc->bNumEndpoints; endp++) { + host_endpoint = &host_interf->endpoint[endp]; + if ((host_endpoint->desc.bEndpointAddress == 0x82) && + (host_endpoint->desc.wMaxPacketSize == 0x10)) { + ttusbir->alt_setting = alt_set; + ttusbir->endpoint = endp; + found = 1; + break; + } + } + } + if (ttusbir->alt_setting != -1) + DPRINTK("alt setting: %d\n", ttusbir->alt_setting); + else { + err("Could not find alternate setting\n"); + kfree(ttusbir); + return -EINVAL; + } + + /* OK lets setup this interface setting */ + usb_set_interface(ttusbir->udev, 0, ttusbir->alt_setting); + + /* Store device info in interface structure */ + usb_set_intfdata(intf, ttusbir); + + /* Register as a LIRC driver */ + if (lirc_buffer_init(&ttusbir->rbuf, sizeof(int), 256) < 0) { + err("Could not get memory for LIRC data buffer\n"); + usb_set_intfdata(intf, NULL); + kfree(ttusbir); + return -ENOMEM; + } + strcpy(ttusbir->driver.name, "TTUSBIR"); + ttusbir->driver.minor = -1; + ttusbir->driver.code_length = 1; + ttusbir->driver.sample_rate = 0; + ttusbir->driver.data = ttusbir; + ttusbir->driver.add_to_buf = NULL; + ttusbir->driver.rbuf = &ttusbir->rbuf; + ttusbir->driver.set_use_inc = set_use_inc; + ttusbir->driver.set_use_dec = set_use_dec; + ttusbir->driver.dev = &intf->dev; + ttusbir->driver.owner = THIS_MODULE; + ttusbir->driver.features = LIRC_CAN_REC_MODE2; + ttusbir->minor = lirc_register_driver(&ttusbir->driver); + if (ttusbir->minor < 0) { + err("Error registering as LIRC driver\n"); + usb_set_intfdata(intf, NULL); + lirc_buffer_free(&ttusbir->rbuf); + kfree(ttusbir); + return -EIO; + } + + /* Allocate and setup the URB that we will use to talk to the device */ + for (i = 0; i < num_urbs; i++) { + ttusbir->urb[i] = usb_alloc_urb(8, GFP_KERNEL); + if (!ttusbir->urb[i]) { + err("Could not allocate memory for the URB\n"); + for (j = i - 1; j >= 0; j--) + kfree(ttusbir->urb[j]); + lirc_buffer_free(&ttusbir->rbuf); + lirc_unregister_driver(ttusbir->minor); + kfree(ttusbir); + usb_set_intfdata(intf, NULL); + return -ENOMEM; + } + ttusbir->urb[i]->dev = ttusbir->udev; + ttusbir->urb[i]->context = ttusbir; + ttusbir->urb[i]->pipe = usb_rcvisocpipe(ttusbir->udev, + ttusbir->endpoint); + ttusbir->urb[i]->interval = 1; + ttusbir->urb[i]->transfer_flags = URB_ISO_ASAP; + ttusbir->urb[i]->transfer_buffer = &ttusbir->buffer[i][0]; + ttusbir->urb[i]->complete = urb_complete; + ttusbir->urb[i]->number_of_packets = 8; + ttusbir->urb[i]->transfer_buffer_length = 128; + for (j = 0; j < 8; j++) { + ttusbir->urb[i]->iso_frame_desc[j].offset = j*16; + ttusbir->urb[i]->iso_frame_desc[j].length = 16; + } + } + return 0; +} + +/** + * Called when the driver is unloaded or the device is unplugged + */ +static void disconnect(struct usb_interface *intf) +{ + int i; + struct ttusbir_device *ttusbir; + + DPRINTK("Module ttusbir disconnect\n"); + + ttusbir = (struct ttusbir_device *) usb_get_intfdata(intf); + usb_set_intfdata(intf, NULL); + lirc_unregister_driver(ttusbir->minor); + DPRINTK("unregistered\n"); + + for (i = 0; i < num_urbs; i++) { + usb_kill_urb(ttusbir->urb[i]); + usb_free_urb(ttusbir->urb[i]); + } + DPRINTK("URBs killed\n"); + lirc_buffer_free(&ttusbir->rbuf); + kfree(ttusbir); +} + +static int ttusbir_init_module(void) +{ + int result; + + DPRINTK(KERN_DEBUG "Module ttusbir init\n"); + + /* register this driver with the USB subsystem */ + result = usb_register(&usb_driver); + if (result) + err("usb_register failed. Error number %d", result); + return result; +} + +static void ttusbir_exit_module(void) +{ + printk(KERN_DEBUG "Module ttusbir exit\n"); + usb_deregister(&usb_driver); +} + +module_init(ttusbir_init_module); +module_exit(ttusbir_exit_module); diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c new file mode 100644 index 0000000..100caab --- /dev/null +++ b/drivers/staging/lirc/lirc_zilog.c @@ -0,0 +1,1387 @@ +/* + * i2c IR lirc driver for devices with zilog IR processors + * + * Copyright (c) 2000 Gerd Knorr + * modified for PixelView (BT878P+W/FM) by + * Michal Kochanowicz + * Christoph Bartelmus + * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by + * Ulrich Mueller + * modified for Asus TV-Box and Creative/VisionTek BreakOut-Box by + * Stefan Jahn + * modified for inclusion into kernel sources by + * Jerome Brock + * modified for Leadtek Winfast PVR2000 by + * Thomas Reitmayr (treitmayr@yahoo.com) + * modified for Hauppauge PVR-150 IR TX device by + * Mark Weaver + * changed name from lirc_pvr150 to lirc_zilog, works on more than pvr-150 + * Jarod Wilson + * + * parts are cut&pasted from the lirc_i2c.c driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +struct IR { + struct lirc_driver l; + + /* Device info */ + struct mutex ir_lock; + int open; + + /* RX device */ + struct i2c_client c_rx; + int have_rx; + + /* RX device buffer & lock */ + struct lirc_buffer buf; + struct mutex buf_lock; + + /* RX polling thread data */ + struct completion *t_notify; + struct completion *t_notify2; + int shutdown; + struct task_struct *task; + + /* RX read data */ + unsigned char b[3]; + + /* TX device */ + struct i2c_client c_tx; + int need_boot; + int have_tx; +}; + +/* Minor -> data mapping */ +static struct IR *ir_devices[MAX_IRCTL_DEVICES]; + +/* Block size for IR transmitter */ +#define TX_BLOCK_SIZE 99 + +/* Hauppauge IR transmitter data */ +struct tx_data_struct { + /* Boot block */ + unsigned char *boot_data; + + /* Start of binary data block */ + unsigned char *datap; + + /* End of binary data block */ + unsigned char *endp; + + /* Number of installed codesets */ + unsigned int num_code_sets; + + /* Pointers to codesets */ + unsigned char **code_sets; + + /* Global fixed data template */ + int fixed[TX_BLOCK_SIZE]; +}; + +static struct tx_data_struct *tx_data; +static struct mutex tx_data_lock; + +#define zilog_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, \ + ## args) +#define zilog_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args) + +#define ZILOG_HAUPPAUGE_IR_RX_NAME "Zilog/Hauppauge IR RX" +#define ZILOG_HAUPPAUGE_IR_TX_NAME "Zilog/Hauppauge IR TX" + +/* module parameters */ +static int debug; /* debug output */ +static int disable_rx; /* disable RX device */ +static int disable_tx; /* disable TX device */ +static int minor = -1; /* minor number */ + +#define dprintk(fmt, args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG KBUILD_MODNAME ": " fmt, \ + ## args); \ + } while (0) + +static int add_to_buf(struct IR *ir) +{ + __u16 code; + unsigned char codes[2]; + unsigned char keybuf[6]; + int got_data = 0; + int ret; + int failures = 0; + unsigned char sendbuf[1] = { 0 }; + + if (lirc_buffer_full(&ir->buf)) { + dprintk("buffer overflow\n"); + return -EOVERFLOW; + } + + /* + * service the device as long as it is returning + * data and we have space + */ + do { + /* + * Lock i2c bus for the duration. RX/TX chips interfere so + * this is worth it + */ + mutex_lock(&ir->ir_lock); + + /* + * Send random "poll command" (?) Windows driver does this + * and it is a good point to detect chip failure. + */ + ret = i2c_master_send(&ir->c_rx, sendbuf, 1); + if (ret != 1) { + zilog_error("i2c_master_send failed with %d\n", ret); + if (failures >= 3) { + mutex_unlock(&ir->ir_lock); + zilog_error("unable to read from the IR chip " + "after 3 resets, giving up\n"); + return ret; + } + + /* Looks like the chip crashed, reset it */ + zilog_error("polling the IR receiver chip failed, " + "trying reset\n"); + + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout((100 * HZ + 999) / 1000); + ir->need_boot = 1; + + ++failures; + mutex_unlock(&ir->ir_lock); + continue; + } + + ret = i2c_master_recv(&ir->c_rx, keybuf, sizeof(keybuf)); + mutex_unlock(&ir->ir_lock); + if (ret != sizeof(keybuf)) { + zilog_error("i2c_master_recv failed with %d -- " + "keeping last read buffer\n", ret); + } else { + ir->b[0] = keybuf[3]; + ir->b[1] = keybuf[4]; + ir->b[2] = keybuf[5]; + dprintk("key (0x%02x/0x%02x)\n", ir->b[0], ir->b[1]); + } + + /* key pressed ? */ +#ifdef I2C_HW_B_HDPVR + if (ir->c_rx.adapter->id == I2C_HW_B_HDPVR) { + if (got_data && (keybuf[0] == 0x80)) + return 0; + else if (got_data && (keybuf[0] == 0x00)) + return -ENODATA; + } else if ((ir->b[0] & 0x80) == 0) +#else + if ((ir->b[0] & 0x80) == 0) +#endif + return got_data ? 0 : -ENODATA; + + /* look what we have */ + code = (((__u16)ir->b[0] & 0x7f) << 6) | (ir->b[1] >> 2); + + codes[0] = (code >> 8) & 0xff; + codes[1] = code & 0xff; + + /* return it */ + lirc_buffer_write(&ir->buf, codes); + ++got_data; + } while (!lirc_buffer_full(&ir->buf)); + + return 0; +} + +/* + * Main function of the polling thread -- from lirc_dev. + * We don't fit the LIRC model at all anymore. This is horrible, but + * basically we have a single RX/TX device with a nasty failure mode + * that needs to be accounted for across the pair. lirc lets us provide + * fops, but prevents us from using the internal polling, etc. if we do + * so. Hence the replication. Might be neater to extend the LIRC model + * to account for this but I'd think it's a very special case of seriously + * messed up hardware. + */ +static int lirc_thread(void *arg) +{ + struct IR *ir = arg; + + if (ir->t_notify != NULL) + complete(ir->t_notify); + + dprintk("poll thread started\n"); + + do { + if (ir->open) { + set_current_state(TASK_INTERRUPTIBLE); + + /* + * This is ~113*2 + 24 + jitter (2*repeat gap + + * code length). We use this interval as the chip + * resets every time you poll it (bad!). This is + * therefore just sufficient to catch all of the + * button presses. It makes the remote much more + * responsive. You can see the difference by + * running irw and holding down a button. With + * 100ms, the old polling interval, you'll notice + * breaks in the repeat sequence corresponding to + * lost keypresses. + */ + schedule_timeout((260 * HZ) / 1000); + if (ir->shutdown) + break; + if (!add_to_buf(ir)) + wake_up_interruptible(&ir->buf.wait_poll); + } else { + /* if device not opened so we can sleep half a second */ + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ/2); + } + } while (!ir->shutdown); + + if (ir->t_notify2 != NULL) + wait_for_completion(ir->t_notify2); + + ir->task = NULL; + if (ir->t_notify != NULL) + complete(ir->t_notify); + + dprintk("poll thread ended\n"); + return 0; +} + +static int set_use_inc(void *data) +{ + struct IR *ir = data; + + if (ir->l.owner == NULL || try_module_get(ir->l.owner) == 0) + return -ENODEV; + + /* lock bttv in memory while /dev/lirc is in use */ + /* + * this is completely broken code. lirc_unregister_driver() + * must be possible even when the device is open + */ + if (ir->c_rx.addr) + i2c_use_client(&ir->c_rx); + if (ir->c_tx.addr) + i2c_use_client(&ir->c_tx); + + return 0; +} + +static void set_use_dec(void *data) +{ + struct IR *ir = data; + + if (ir->c_rx.addr) + i2c_release_client(&ir->c_rx); + if (ir->c_tx.addr) + i2c_release_client(&ir->c_tx); + if (ir->l.owner != NULL) + module_put(ir->l.owner); +} + +/* safe read of a uint32 (always network byte order) */ +static int read_uint32(unsigned char **data, + unsigned char *endp, unsigned int *val) +{ + if (*data + 4 > endp) + return 0; + *val = ((*data)[0] << 24) | ((*data)[1] << 16) | + ((*data)[2] << 8) | (*data)[3]; + *data += 4; + return 1; +} + +/* safe read of a uint8 */ +static int read_uint8(unsigned char **data, + unsigned char *endp, unsigned char *val) +{ + if (*data + 1 > endp) + return 0; + *val = *((*data)++); + return 1; +} + +/* safe skipping of N bytes */ +static int skip(unsigned char **data, + unsigned char *endp, unsigned int distance) +{ + if (*data + distance > endp) + return 0; + *data += distance; + return 1; +} + +/* decompress key data into the given buffer */ +static int get_key_data(unsigned char *buf, + unsigned int codeset, unsigned int key) +{ + unsigned char *data, *endp, *diffs, *key_block; + unsigned char keys, ndiffs, id; + unsigned int base, lim, pos, i; + + /* Binary search for the codeset */ + for (base = 0, lim = tx_data->num_code_sets; lim; lim >>= 1) { + pos = base + (lim >> 1); + data = tx_data->code_sets[pos]; + + if (!read_uint32(&data, tx_data->endp, &i)) + goto corrupt; + + if (i == codeset) + break; + else if (codeset > i) { + base = pos + 1; + --lim; + } + } + /* Not found? */ + if (!lim) + return -EPROTO; + + /* Set end of data block */ + endp = pos < tx_data->num_code_sets - 1 ? + tx_data->code_sets[pos + 1] : tx_data->endp; + + /* Read the block header */ + if (!read_uint8(&data, endp, &keys) || + !read_uint8(&data, endp, &ndiffs) || + ndiffs > TX_BLOCK_SIZE || keys == 0) + goto corrupt; + + /* Save diffs & skip */ + diffs = data; + if (!skip(&data, endp, ndiffs)) + goto corrupt; + + /* Read the id of the first key */ + if (!read_uint8(&data, endp, &id)) + goto corrupt; + + /* Unpack the first key's data */ + for (i = 0; i < TX_BLOCK_SIZE; ++i) { + if (tx_data->fixed[i] == -1) { + if (!read_uint8(&data, endp, &buf[i])) + goto corrupt; + } else { + buf[i] = (unsigned char)tx_data->fixed[i]; + } + } + + /* Early out key found/not found */ + if (key == id) + return 0; + if (keys == 1) + return -EPROTO; + + /* Sanity check */ + key_block = data; + if (!skip(&data, endp, (keys - 1) * (ndiffs + 1))) + goto corrupt; + + /* Binary search for the key */ + for (base = 0, lim = keys - 1; lim; lim >>= 1) { + /* Seek to block */ + unsigned char *key_data; + pos = base + (lim >> 1); + key_data = key_block + (ndiffs + 1) * pos; + + if (*key_data == key) { + /* skip key id */ + ++key_data; + + /* found, so unpack the diffs */ + for (i = 0; i < ndiffs; ++i) { + unsigned char val; + if (!read_uint8(&key_data, endp, &val) || + diffs[i] >= TX_BLOCK_SIZE) + goto corrupt; + buf[diffs[i]] = val; + } + + return 0; + } else if (key > *key_data) { + base = pos + 1; + --lim; + } + } + /* Key not found */ + return -EPROTO; + +corrupt: + zilog_error("firmware is corrupt\n"); + return -EFAULT; +} + +/* send a block of data to the IR TX device */ +static int send_data_block(struct IR *ir, unsigned char *data_block) +{ + int i, j, ret; + unsigned char buf[5]; + + for (i = 0; i < TX_BLOCK_SIZE;) { + int tosend = TX_BLOCK_SIZE - i; + if (tosend > 4) + tosend = 4; + buf[0] = (unsigned char)(i + 1); + for (j = 0; j < tosend; ++j) + buf[1 + j] = data_block[i + j]; + dprintk("%02x %02x %02x %02x %02x", + buf[0], buf[1], buf[2], buf[3], buf[4]); + ret = i2c_master_send(&ir->c_tx, buf, tosend + 1); + if (ret != tosend + 1) { + zilog_error("i2c_master_send failed with %d\n", ret); + return ret < 0 ? ret : -EFAULT; + } + i += tosend; + } + return 0; +} + +/* send boot data to the IR TX device */ +static int send_boot_data(struct IR *ir) +{ + int ret; + unsigned char buf[4]; + + /* send the boot block */ + ret = send_data_block(ir, tx_data->boot_data); + if (ret != 0) + return ret; + + /* kick it off? */ + buf[0] = 0x00; + buf[1] = 0x20; + ret = i2c_master_send(&ir->c_tx, buf, 2); + if (ret != 2) { + zilog_error("i2c_master_send failed with %d\n", ret); + return ret < 0 ? ret : -EFAULT; + } + ret = i2c_master_send(&ir->c_tx, buf, 1); + if (ret != 1) { + zilog_error("i2c_master_send failed with %d\n", ret); + return ret < 0 ? ret : -EFAULT; + } + + /* Here comes the firmware version... (hopefully) */ + ret = i2c_master_recv(&ir->c_tx, buf, 4); + if (ret != 4) { + zilog_error("i2c_master_recv failed with %d\n", ret); + return 0; + } + if (buf[0] != 0x80) { + zilog_error("unexpected IR TX response: %02x\n", buf[0]); + return 0; + } + zilog_notify("Zilog/Hauppauge IR blaster firmware version " + "%d.%d.%d loaded\n", buf[1], buf[2], buf[3]); + + return 0; +} + +/* unload "firmware", lock held */ +static void fw_unload_locked(void) +{ + if (tx_data) { + if (tx_data->code_sets) + vfree(tx_data->code_sets); + + if (tx_data->datap) + vfree(tx_data->datap); + + vfree(tx_data); + tx_data = NULL; + dprintk("successfully unloaded IR blaster firmware\n"); + } +} + +/* unload "firmware" for the IR TX device */ +static void fw_unload(void) +{ + mutex_lock(&tx_data_lock); + fw_unload_locked(); + mutex_unlock(&tx_data_lock); +} + +/* load "firmware" for the IR TX device */ +static int fw_load(struct IR *ir) +{ + int ret; + unsigned int i; + unsigned char *data, version, num_global_fixed; + const struct firmware *fw_entry; + + /* Already loaded? */ + mutex_lock(&tx_data_lock); + if (tx_data) { + ret = 0; + goto out; + } + + /* Request codeset data file */ + ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &ir->c_tx.dev); + if (ret != 0) { + zilog_error("firmware haup-ir-blaster.bin not available " + "(%d)\n", ret); + ret = ret < 0 ? ret : -EFAULT; + goto out; + } + dprintk("firmware of size %zu loaded\n", fw_entry->size); + + /* Parse the file */ + tx_data = vmalloc(sizeof(*tx_data)); + if (tx_data == NULL) { + zilog_error("out of memory\n"); + release_firmware(fw_entry); + ret = -ENOMEM; + goto out; + } + tx_data->code_sets = NULL; + + /* Copy the data so hotplug doesn't get confused and timeout */ + tx_data->datap = vmalloc(fw_entry->size); + if (tx_data->datap == NULL) { + zilog_error("out of memory\n"); + release_firmware(fw_entry); + vfree(tx_data); + ret = -ENOMEM; + goto out; + } + memcpy(tx_data->datap, fw_entry->data, fw_entry->size); + tx_data->endp = tx_data->datap + fw_entry->size; + release_firmware(fw_entry); fw_entry = NULL; + + /* Check version */ + data = tx_data->datap; + if (!read_uint8(&data, tx_data->endp, &version)) + goto corrupt; + if (version != 1) { + zilog_error("unsupported code set file version (%u, expected" + "1) -- please upgrade to a newer driver", + version); + fw_unload_locked(); + ret = -EFAULT; + goto out; + } + + /* Save boot block for later */ + tx_data->boot_data = data; + if (!skip(&data, tx_data->endp, TX_BLOCK_SIZE)) + goto corrupt; + + if (!read_uint32(&data, tx_data->endp, + &tx_data->num_code_sets)) + goto corrupt; + + dprintk("%u IR blaster codesets loaded\n", tx_data->num_code_sets); + + tx_data->code_sets = vmalloc( + tx_data->num_code_sets * sizeof(char *)); + if (tx_data->code_sets == NULL) { + fw_unload_locked(); + ret = -ENOMEM; + goto out; + } + + for (i = 0; i < TX_BLOCK_SIZE; ++i) + tx_data->fixed[i] = -1; + + /* Read global fixed data template */ + if (!read_uint8(&data, tx_data->endp, &num_global_fixed) || + num_global_fixed > TX_BLOCK_SIZE) + goto corrupt; + for (i = 0; i < num_global_fixed; ++i) { + unsigned char pos, val; + if (!read_uint8(&data, tx_data->endp, &pos) || + !read_uint8(&data, tx_data->endp, &val) || + pos >= TX_BLOCK_SIZE) + goto corrupt; + tx_data->fixed[pos] = (int)val; + } + + /* Filch out the position of each code set */ + for (i = 0; i < tx_data->num_code_sets; ++i) { + unsigned int id; + unsigned char keys; + unsigned char ndiffs; + + /* Save the codeset position */ + tx_data->code_sets[i] = data; + + /* Read header */ + if (!read_uint32(&data, tx_data->endp, &id) || + !read_uint8(&data, tx_data->endp, &keys) || + !read_uint8(&data, tx_data->endp, &ndiffs) || + ndiffs > TX_BLOCK_SIZE || keys == 0) + goto corrupt; + + /* skip diff positions */ + if (!skip(&data, tx_data->endp, ndiffs)) + goto corrupt; + + /* + * After the diffs we have the first key id + data - + * global fixed + */ + if (!skip(&data, tx_data->endp, + 1 + TX_BLOCK_SIZE - num_global_fixed)) + goto corrupt; + + /* Then we have keys-1 blocks of key id+diffs */ + if (!skip(&data, tx_data->endp, + (ndiffs + 1) * (keys - 1))) + goto corrupt; + } + ret = 0; + goto out; + +corrupt: + zilog_error("firmware is corrupt\n"); + fw_unload_locked(); + ret = -EFAULT; + +out: + mutex_unlock(&tx_data_lock); + return ret; +} + +/* initialise the IR TX device */ +static int tx_init(struct IR *ir) +{ + int ret; + + /* Load 'firmware' */ + ret = fw_load(ir); + if (ret != 0) + return ret; + + /* Send boot block */ + ret = send_boot_data(ir); + if (ret != 0) + return ret; + ir->need_boot = 0; + + /* Looks good */ + return 0; +} + +/* do nothing stub to make LIRC happy */ +static loff_t lseek(struct file *filep, loff_t offset, int orig) +{ + return -ESPIPE; +} + +/* copied from lirc_dev */ +static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos) +{ + struct IR *ir = (struct IR *)filep->private_data; + unsigned char buf[ir->buf.chunk_size]; + int ret = 0, written = 0; + DECLARE_WAITQUEUE(wait, current); + + dprintk("read called\n"); + if (ir->c_rx.addr == 0) + return -ENODEV; + + if (mutex_lock_interruptible(&ir->buf_lock)) + return -ERESTARTSYS; + + if (n % ir->buf.chunk_size) { + dprintk("read result = -EINVAL\n"); + mutex_unlock(&ir->buf_lock); + return -EINVAL; + } + + /* + * we add ourselves to the task queue before buffer check + * to avoid losing scan code (in case when queue is awaken somewhere + * between while condition checking and scheduling) + */ + add_wait_queue(&ir->buf.wait_poll, &wait); + set_current_state(TASK_INTERRUPTIBLE); + + /* + * while we didn't provide 'length' bytes, device is opened in blocking + * mode and 'copy_to_user' is happy, wait for data. + */ + while (written < n && ret == 0) { + if (lirc_buffer_empty(&ir->buf)) { + /* + * According to the read(2) man page, 'written' can be + * returned as less than 'n', instead of blocking + * again, returning -EWOULDBLOCK, or returning + * -ERESTARTSYS + */ + if (written) + break; + if (filep->f_flags & O_NONBLOCK) { + ret = -EWOULDBLOCK; + break; + } + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + } else { + lirc_buffer_read(&ir->buf, buf); + ret = copy_to_user((void *)outbuf+written, buf, + ir->buf.chunk_size); + written += ir->buf.chunk_size; + } + } + + remove_wait_queue(&ir->buf.wait_poll, &wait); + set_current_state(TASK_RUNNING); + mutex_unlock(&ir->buf_lock); + + dprintk("read result = %s (%d)\n", + ret ? "-EFAULT" : "OK", ret); + + return ret ? ret : written; +} + +/* send a keypress to the IR TX device */ +static int send_code(struct IR *ir, unsigned int code, unsigned int key) +{ + unsigned char data_block[TX_BLOCK_SIZE]; + unsigned char buf[2]; + int i, ret; + + /* Get data for the codeset/key */ + ret = get_key_data(data_block, code, key); + + if (ret == -EPROTO) { + zilog_error("failed to get data for code %u, key %u -- check " + "lircd.conf entries\n", code, key); + return ret; + } else if (ret != 0) + return ret; + + /* Send the data block */ + ret = send_data_block(ir, data_block); + if (ret != 0) + return ret; + + /* Send data block length? */ + buf[0] = 0x00; + buf[1] = 0x40; + ret = i2c_master_send(&ir->c_tx, buf, 2); + if (ret != 2) { + zilog_error("i2c_master_send failed with %d\n", ret); + return ret < 0 ? ret : -EFAULT; + } + ret = i2c_master_send(&ir->c_tx, buf, 1); + if (ret != 1) { + zilog_error("i2c_master_send failed with %d\n", ret); + return ret < 0 ? ret : -EFAULT; + } + + /* Send finished download? */ + ret = i2c_master_recv(&ir->c_tx, buf, 1); + if (ret != 1) { + zilog_error("i2c_master_recv failed with %d\n", ret); + return ret < 0 ? ret : -EFAULT; + } + if (buf[0] != 0xA0) { + zilog_error("unexpected IR TX response #1: %02x\n", + buf[0]); + return -EFAULT; + } + + /* Send prepare command? */ + buf[0] = 0x00; + buf[1] = 0x80; + ret = i2c_master_send(&ir->c_tx, buf, 2); + if (ret != 2) { + zilog_error("i2c_master_send failed with %d\n", ret); + return ret < 0 ? ret : -EFAULT; + } + +#ifdef I2C_HW_B_HDPVR + /* + * The sleep bits aren't necessary on the HD PVR, and in fact, the + * last i2c_master_recv always fails with a -5, so for now, we're + * going to skip this whole mess and say we're done on the HD PVR + */ + if (ir->c_rx.adapter->id == I2C_HW_B_HDPVR) + goto done; +#endif + + /* + * This bit NAKs until the device is ready, so we retry it + * sleeping a bit each time. This seems to be what the windows + * driver does, approximately. + * Try for up to 1s. + */ + for (i = 0; i < 20; ++i) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout((50 * HZ + 999) / 1000); + ret = i2c_master_send(&ir->c_tx, buf, 1); + if (ret == 1) + break; + dprintk("NAK expected: i2c_master_send " + "failed with %d (try %d)\n", ret, i+1); + } + if (ret != 1) { + zilog_error("IR TX chip never got ready: last i2c_master_send " + "failed with %d\n", ret); + return ret < 0 ? ret : -EFAULT; + } + + /* Seems to be an 'ok' response */ + i = i2c_master_recv(&ir->c_tx, buf, 1); + if (i != 1) { + zilog_error("i2c_master_recv failed with %d\n", ret); + return -EFAULT; + } + if (buf[0] != 0x80) { + zilog_error("unexpected IR TX response #2: %02x\n", buf[0]); + return -EFAULT; + } + +done: + /* Oh good, it worked */ + dprintk("sent code %u, key %u\n", code, key); + return 0; +} + +/* + * Write a code to the device. We take in a 32-bit number (an int) and then + * decode this to a codeset/key index. The key data is then decompressed and + * sent to the device. We have a spin lock as per i2c documentation to prevent + * multiple concurrent sends which would probably cause the device to explode. + */ +static ssize_t write(struct file *filep, const char *buf, size_t n, + loff_t *ppos) +{ + struct IR *ir = (struct IR *)filep->private_data; + size_t i; + int failures = 0; + + if (ir->c_tx.addr == 0) + return -ENODEV; + + /* Validate user parameters */ + if (n % sizeof(int)) + return -EINVAL; + + /* Lock i2c bus for the duration */ + mutex_lock(&ir->ir_lock); + + /* Send each keypress */ + for (i = 0; i < n;) { + int ret = 0; + int command; + + if (copy_from_user(&command, buf + i, sizeof(command))) { + mutex_unlock(&ir->ir_lock); + return -EFAULT; + } + + /* Send boot data first if required */ + if (ir->need_boot == 1) { + ret = send_boot_data(ir); + if (ret == 0) + ir->need_boot = 0; + } + + /* Send the code */ + if (ret == 0) { + ret = send_code(ir, (unsigned)command >> 16, + (unsigned)command & 0xFFFF); + if (ret == -EPROTO) { + mutex_unlock(&ir->ir_lock); + return ret; + } + } + + /* + * Hmm, a failure. If we've had a few then give up, otherwise + * try a reset + */ + if (ret != 0) { + /* Looks like the chip crashed, reset it */ + zilog_error("sending to the IR transmitter chip " + "failed, trying reset\n"); + + if (failures >= 3) { + zilog_error("unable to send to the IR chip " + "after 3 resets, giving up\n"); + mutex_unlock(&ir->ir_lock); + return ret; + } + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout((100 * HZ + 999) / 1000); + ir->need_boot = 1; + ++failures; + } else + i += sizeof(int); + } + + /* Release i2c bus */ + mutex_unlock(&ir->ir_lock); + + /* All looks good */ + return n; +} + +/* copied from lirc_dev */ +static unsigned int poll(struct file *filep, poll_table *wait) +{ + struct IR *ir = (struct IR *)filep->private_data; + unsigned int ret; + + dprintk("poll called\n"); + if (ir->c_rx.addr == 0) + return -ENODEV; + + mutex_lock(&ir->buf_lock); + + poll_wait(filep, &ir->buf.wait_poll, wait); + + dprintk("poll result = %s\n", + lirc_buffer_empty(&ir->buf) ? "0" : "POLLIN|POLLRDNORM"); + + ret = lirc_buffer_empty(&ir->buf) ? 0 : (POLLIN|POLLRDNORM); + + mutex_unlock(&ir->buf_lock); + return ret; +} + +static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg) +{ + struct IR *ir = (struct IR *)filep->private_data; + int result; + unsigned long mode, features = 0; + + if (ir->c_rx.addr != 0) + features |= LIRC_CAN_REC_LIRCCODE; + if (ir->c_tx.addr != 0) + features |= LIRC_CAN_SEND_PULSE; + + switch (cmd) { + case LIRC_GET_LENGTH: + result = put_user((unsigned long)13, + (unsigned long *)arg); + break; + case LIRC_GET_FEATURES: + result = put_user(features, (unsigned long *) arg); + break; + case LIRC_GET_REC_MODE: + if (!(features&LIRC_CAN_REC_MASK)) + return -ENOSYS; + + result = put_user(LIRC_REC2MODE + (features&LIRC_CAN_REC_MASK), + (unsigned long *)arg); + break; + case LIRC_SET_REC_MODE: + if (!(features&LIRC_CAN_REC_MASK)) + return -ENOSYS; + + result = get_user(mode, (unsigned long *)arg); + if (!result && !(LIRC_MODE2REC(mode) & features)) + result = -EINVAL; + break; + case LIRC_GET_SEND_MODE: + if (!(features&LIRC_CAN_SEND_MASK)) + return -ENOSYS; + + result = put_user(LIRC_MODE_PULSE, (unsigned long *) arg); + break; + case LIRC_SET_SEND_MODE: + if (!(features&LIRC_CAN_SEND_MASK)) + return -ENOSYS; + + result = get_user(mode, (unsigned long *) arg); + if (!result && mode != LIRC_MODE_PULSE) + return -EINVAL; + break; + default: + return -EINVAL; + } + return result; +} + +/* + * Open the IR device. Get hold of our IR structure and + * stash it in private_data for the file + */ +static int open(struct inode *node, struct file *filep) +{ + struct IR *ir; + int ret; + + /* find our IR struct */ + unsigned minor = MINOR(node->i_rdev); + if (minor >= MAX_IRCTL_DEVICES) { + dprintk("minor %d: open result = -ENODEV\n", + minor); + return -ENODEV; + } + ir = ir_devices[minor]; + + /* increment in use count */ + mutex_lock(&ir->ir_lock); + ++ir->open; + ret = set_use_inc(ir); + if (ret != 0) { + --ir->open; + mutex_unlock(&ir->ir_lock); + return ret; + } + mutex_unlock(&ir->ir_lock); + + /* stash our IR struct */ + filep->private_data = ir; + + return 0; +} + +/* Close the IR device */ +static int close(struct inode *node, struct file *filep) +{ + /* find our IR struct */ + struct IR *ir = (struct IR *)filep->private_data; + if (ir == NULL) { + zilog_error("close: no private_data attached to the file!\n"); + return -ENODEV; + } + + /* decrement in use count */ + mutex_lock(&ir->ir_lock); + --ir->open; + set_use_dec(ir); + mutex_unlock(&ir->ir_lock); + + return 0; +} + +static struct lirc_driver lirc_template = { + .name = "lirc_zilog", + .set_use_inc = set_use_inc, + .set_use_dec = set_use_dec, + .owner = THIS_MODULE +}; + +static int ir_remove(struct i2c_client *client); +static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id); +static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg); + +static const struct i2c_device_id ir_transceiver_id[] = { + /* Generic entry for any IR transceiver */ + { "ir_video", 0 }, + /* IR device specific entries should be added here */ + { "ir_tx_z8f0811_haup", 0 }, + { "ir_rx_z8f0811_haup", 0 }, + { } +}; + +static struct i2c_driver driver = { + .driver = { + .owner = THIS_MODULE, + .name = "Zilog/Hauppauge i2c IR", + }, + .probe = ir_probe, + .remove = ir_remove, + .command = ir_command, + .id_table = ir_transceiver_id, +}; + +static const struct file_operations lirc_fops = { + .owner = THIS_MODULE, + .llseek = lseek, + .read = read, + .write = write, + .poll = poll, + .unlocked_ioctl = ioctl, + .open = open, + .release = close +}; + +static int ir_remove(struct i2c_client *client) +{ + struct IR *ir = i2c_get_clientdata(client); + + mutex_lock(&ir->ir_lock); + + if (ir->have_rx || ir->have_tx) { + DECLARE_COMPLETION(tn); + DECLARE_COMPLETION(tn2); + + /* end up polling thread */ + if (ir->task && !IS_ERR(ir->task)) { + ir->t_notify = &tn; + ir->t_notify2 = &tn2; + ir->shutdown = 1; + wake_up_process(ir->task); + complete(&tn2); + wait_for_completion(&tn); + ir->t_notify = NULL; + ir->t_notify2 = NULL; + } + + } else { + mutex_unlock(&ir->ir_lock); + zilog_error("%s: detached from something we didn't " + "attach to\n", __func__); + return -ENODEV; + } + + /* unregister lirc driver */ + if (ir->l.minor >= 0 && ir->l.minor < MAX_IRCTL_DEVICES) { + lirc_unregister_driver(ir->l.minor); + ir_devices[ir->l.minor] = NULL; + } + + /* free memory */ + lirc_buffer_free(&ir->buf); + mutex_unlock(&ir->ir_lock); + kfree(ir); + + return 0; +} + +static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct IR *ir = NULL; + struct i2c_adapter *adap = client->adapter; + char buf; + int ret; + int have_rx = 0, have_tx = 0; + + dprintk("%s: adapter id=0x%x, client addr=0x%02x\n", + __func__, adap->id, client->addr); + + /* + * The external IR receiver is at i2c address 0x71. + * The IR transmitter is at 0x70. + */ + client->addr = 0x70; + + if (!disable_tx) { + if (i2c_master_recv(client, &buf, 1) == 1) + have_tx = 1; + dprintk("probe 0x70 @ %s: %s\n", + adap->name, have_tx ? "success" : "failed"); + } + + if (!disable_rx) { + client->addr = 0x71; + if (i2c_master_recv(client, &buf, 1) == 1) + have_rx = 1; + dprintk("probe 0x71 @ %s: %s\n", + adap->name, have_rx ? "success" : "failed"); + } + + if (!(have_rx || have_tx)) { + zilog_error("%s: no devices found\n", adap->name); + goto out_nodev; + } + + printk(KERN_INFO "lirc_zilog: chip found with %s\n", + have_rx && have_tx ? "RX and TX" : + have_rx ? "RX only" : "TX only"); + + ir = kzalloc(sizeof(struct IR), GFP_KERNEL); + + if (!ir) + goto out_nomem; + + ret = lirc_buffer_init(&ir->buf, 2, BUFLEN / 2); + if (ret) + goto out_nomem; + + mutex_init(&ir->ir_lock); + mutex_init(&ir->buf_lock); + ir->need_boot = 1; + + memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver)); + ir->l.minor = -1; + + /* I2C attach to device */ + i2c_set_clientdata(client, ir); + + /* initialise RX device */ + if (have_rx) { + DECLARE_COMPLETION(tn); + memcpy(&ir->c_rx, client, sizeof(struct i2c_client)); + + ir->c_rx.addr = 0x71; + strlcpy(ir->c_rx.name, ZILOG_HAUPPAUGE_IR_RX_NAME, + I2C_NAME_SIZE); + + /* try to fire up polling thread */ + ir->t_notify = &tn; + ir->task = kthread_run(lirc_thread, ir, "lirc_zilog"); + if (IS_ERR(ir->task)) { + ret = PTR_ERR(ir->task); + zilog_error("lirc_register_driver: cannot run " + "poll thread %d\n", ret); + goto err; + } + wait_for_completion(&tn); + ir->t_notify = NULL; + ir->have_rx = 1; + } + + /* initialise TX device */ + if (have_tx) { + memcpy(&ir->c_tx, client, sizeof(struct i2c_client)); + ir->c_tx.addr = 0x70; + strlcpy(ir->c_tx.name, ZILOG_HAUPPAUGE_IR_TX_NAME, + I2C_NAME_SIZE); + ir->have_tx = 1; + } + + /* set lirc_dev stuff */ + ir->l.code_length = 13; + ir->l.rbuf = &ir->buf; + ir->l.fops = &lirc_fops; + ir->l.data = ir; + ir->l.minor = minor; + ir->l.dev = &adap->dev; + ir->l.sample_rate = 0; + + /* register with lirc */ + ir->l.minor = lirc_register_driver(&ir->l); + if (ir->l.minor < 0 || ir->l.minor >= MAX_IRCTL_DEVICES) { + zilog_error("ir_attach: \"minor\" must be between 0 and %d " + "(%d)!\n", MAX_IRCTL_DEVICES-1, ir->l.minor); + ret = -EBADRQC; + goto err; + } + + /* store this for getting back in open() later on */ + ir_devices[ir->l.minor] = ir; + + /* + * if we have the tx device, load the 'firmware'. We do this + * after registering with lirc as otherwise hotplug seems to take + * 10s to create the lirc device. + */ + if (have_tx) { + /* Special TX init */ + ret = tx_init(ir); + if (ret != 0) + goto err; + } + + return 0; + +err: + /* undo everything, hopefully... */ + if (ir->c_rx.addr) + ir_remove(&ir->c_rx); + if (ir->c_tx.addr) + ir_remove(&ir->c_tx); + return ret; + +out_nodev: + zilog_error("no device found\n"); + return -ENODEV; + +out_nomem: + zilog_error("memory allocation failure\n"); + kfree(ir); + return -ENOMEM; +} + +static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg) +{ + /* nothing */ + return 0; +} + +static int __init zilog_init(void) +{ + int ret; + + zilog_notify("Zilog/Hauppauge IR driver initializing\n"); + + mutex_init(&tx_data_lock); + + request_module("firmware_class"); + + ret = i2c_add_driver(&driver); + if (ret) + zilog_error("initialization failed\n"); + else + zilog_notify("initialization complete\n"); + + return ret; +} + +static void __exit zilog_exit(void) +{ + i2c_del_driver(&driver); + /* if loaded */ + fw_unload(); + zilog_notify("Zilog/Hauppauge IR driver unloaded\n"); +} + +module_init(zilog_init); +module_exit(zilog_exit); + +MODULE_DESCRIPTION("Zilog/Hauppauge infrared transmitter driver (i2c stack)"); +MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, " + "Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver"); +MODULE_LICENSE("GPL"); +/* for compat with old name, which isn't all that accurate anymore */ +MODULE_ALIAS("lirc_pvr150"); + +module_param(minor, int, 0444); +MODULE_PARM_DESC(minor, "Preferred minor device number"); + +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "Enable debugging messages"); + +module_param(disable_rx, bool, 0644); +MODULE_PARM_DESC(disable_rx, "Disable the IR receiver device"); + +module_param(disable_tx, bool, 0644); +MODULE_PARM_DESC(disable_tx, "Disable the IR transmitter device");