diff --git a/kernel.spec b/kernel.spec
index 845755c..7855256 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -777,6 +777,9 @@ Patch25115: elevator-acquire-q-sysfs_lock-in-elevator_change.patch
 #rhbz 1011719
 Patch25116: hwmon-applesmc-Check-key-count-before-proceeding.patch
 
+#rhbz 974072
+Patch25117: rt2800-add-support-for-rf3070.patch
+
 # END OF PATCH DEFINITIONS
 
 %endif
@@ -1502,6 +1505,9 @@ ApplyPatch elevator-acquire-q-sysfs_lock-in-elevator_change.patch
 #rhbz 1011719
 ApplyPatch hwmon-applesmc-Check-key-count-before-proceeding.patch
 
+#rhbz 974072
+ApplyPatch rt2800-add-support-for-rf3070.patch
+
 # END OF PATCH APPLICATIONS
 
 %endif
@@ -2315,6 +2321,7 @@ fi
 
 %changelog
 * Mon Sep 30 2013 Josh Boyer <jwboyer@fedoraproject.org>
+- Add support for rf3070 devices from Stanislaw Gruszka (rhbz 974072)
 - Drop VC_MUTE patch (rhbz 859485)
 
 * Fri Sep 27 2013 Justin M. Forbes <jforbes@fedoraproject.org> - 3.11.2-201
diff --git a/rt2800-add-support-for-rf3070.patch b/rt2800-add-support-for-rf3070.patch
new file mode 100644
index 0000000..24c16cb
--- /dev/null
+++ b/rt2800-add-support-for-rf3070.patch
@@ -0,0 +1,80 @@
+diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
+index d78c495..2132830 100644
+--- a/drivers/net/wireless/rt2x00/rt2800.h
++++ b/drivers/net/wireless/rt2x00/rt2800.h
+@@ -65,6 +65,7 @@
+ #define RF3021				0x0007
+ #define RF3022				0x0008
+ #define RF3052				0x0009
++#define RF3070				0x3070
+ #define RF2853				0x000a
+ #define RF3320				0x000b
+ #define RF3322				0x000c
+diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
+index 1b41c8e..2958265 100644
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -2597,6 +2597,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
+ 	case RF3322:
+ 		rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
+ 		break;
++	case RF3070:
+ 	case RF5360:
+ 	case RF5370:
+ 	case RF5372:
+@@ -2611,7 +2612,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
+ 		rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
+ 	}
+ 
+-	if (rt2x00_rf(rt2x00dev, RF3290) ||
++	if (rt2x00_rf(rt2x00dev, RF3070) ||
++	    rt2x00_rf(rt2x00dev, RF3290) ||
+ 	    rt2x00_rf(rt2x00dev, RF3322) ||
+ 	    rt2x00_rf(rt2x00dev, RF5360) ||
+ 	    rt2x00_rf(rt2x00dev, RF5370) ||
+@@ -3219,6 +3221,7 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
+ 		rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+ 		rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
+ 		break;
++	case RF3070:
+ 	case RF3290:
+ 	case RF5360:
+ 	case RF5370:
+@@ -5731,6 +5734,7 @@ static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
+ 	case RF3021:
+ 	case RF3022:
+ 	case RF3052:
++	case RF3070:
+ 	case RF3290:
+ 	case RF3320:
+ 	case RF3322:
+@@ -6186,6 +6190,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+ 		   rt2x00_rf(rt2x00dev, RF2020) ||
+ 		   rt2x00_rf(rt2x00dev, RF3021) ||
+ 		   rt2x00_rf(rt2x00dev, RF3022) ||
++		   rt2x00_rf(rt2x00dev, RF3070) ||
+ 		   rt2x00_rf(rt2x00dev, RF3290) ||
+ 		   rt2x00_rf(rt2x00dev, RF3320) ||
+ 		   rt2x00_rf(rt2x00dev, RF3322) ||
+@@ -6219,10 +6224,11 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+ 	/*
+ 	 * Initialize HT information.
+ 	 */
+-	if (!rt2x00_rf(rt2x00dev, RF2020))
++	if (!rt2x00_rf(rt2x00dev, RF2020)) {
+ 		spec->ht.ht_supported = true;
+-	else
++ 	} else {
+ 		spec->ht.ht_supported = false;
++	}
+ 
+ 	spec->ht.cap =
+ 	    IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+@@ -6290,6 +6296,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+ 	case RF3022:
+ 	case RF3320:
+ 	case RF3052:
++	case RF3070:
+ 	case RF3290:
+ 	case RF5360:
+ 	case RF5370: