diff --git a/baseconfig/CONFIG_MVPP2 b/baseconfig/CONFIG_MVPP2 deleted file mode 100644 index ae82dcb..0000000 --- a/baseconfig/CONFIG_MVPP2 +++ /dev/null @@ -1 +0,0 @@ -# CONFIG_MVPP2 is not set diff --git a/baseconfig/arm/CONFIG_MMC_BCM2835 b/baseconfig/arm/CONFIG_MMC_BCM2835 new file mode 100644 index 0000000..b3750c1 --- /dev/null +++ b/baseconfig/arm/CONFIG_MMC_BCM2835 @@ -0,0 +1 @@ +CONFIG_MMC_BCM2835=m diff --git a/baseconfig/arm/CONFIG_MVPP2 b/baseconfig/arm/CONFIG_MVPP2 new file mode 100644 index 0000000..e41ec5c --- /dev/null +++ b/baseconfig/arm/CONFIG_MVPP2 @@ -0,0 +1 @@ +CONFIG_MVPP2=m diff --git a/baseconfig/arm/arm64/CONFIG_QCOM_QDF2400_ERRATUM_0065 b/baseconfig/arm/arm64/CONFIG_QCOM_QDF2400_ERRATUM_0065 new file mode 100644 index 0000000..dec9be9 --- /dev/null +++ b/baseconfig/arm/arm64/CONFIG_QCOM_QDF2400_ERRATUM_0065 @@ -0,0 +1 @@ +CONFIG_QCOM_QDF2400_ERRATUM_0065=y diff --git a/baseconfig/arm/armv7/CONFIG_MVPP2 b/baseconfig/arm/armv7/CONFIG_MVPP2 deleted file mode 100644 index e41ec5c..0000000 --- a/baseconfig/arm/armv7/CONFIG_MVPP2 +++ /dev/null @@ -1 +0,0 @@ -CONFIG_MVPP2=m diff --git a/bcm283x-mmc-bcm2835.patch b/bcm283x-mmc-bcm2835.patch new file mode 100644 index 0000000..59916d8 --- /dev/null +++ b/bcm283x-mmc-bcm2835.patch @@ -0,0 +1,1893 @@ +From patchwork Wed Mar 8 09:19:01 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,1/7] dt-bindings: Add binding for brcm,bcm2835-sdhost. +From: Gerd Hoffmann +X-Patchwork-Id: 9610673 +Message-Id: <1488964751-22763-2-git-send-email-kraxel@redhat.com> +To: linux-rpi-kernel@lists.infradead.org +Cc: mark.rutland@arm.com, stefan.wahren@i2se.com, ulf.hansson@linaro.org, + f.fainelli@gmail.com, sbranden@broadcom.com, devicetree@vger.kernel.org, + rjui@broadcom.com, lee@kernel.org, will.deacon@arm.com, + linux@armlinux.org.uk, + linux-kernel@vger.kernel.org, eric@anholt.net, robh+dt@kernel.org, + bcm-kernel-feedback-list@broadcom.com, Gerd Hoffmann , + catalin.marinas@arm.com, linux-mmc@vger.kernel.org, + linux-arm-kernel@lists.infradead.org +Date: Wed, 8 Mar 2017 10:19:01 +0100 + +From: Eric Anholt + +This is the other SD controller on the platform, which can be swapped +to the role of SD card host using pin muxing. + +Signed-off-by: Eric Anholt +Signed-off-by: Gerd Hoffmann +Acked-by: Rob Herring +--- + .../bindings/mmc/brcm,bcm2835-sdhost.txt | 23 ++++++++++++++++++++++ + 1 file changed, 23 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt + +diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt +new file mode 100644 +index 0000000..d876580 +--- /dev/null ++++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt +@@ -0,0 +1,23 @@ ++Broadcom BCM2835 SDHOST controller ++ ++This file documents differences between the core properties described ++by mmc.txt and the properties that represent the BCM2835 controller. ++ ++Required properties: ++- compatible: Should be "brcm,bcm2835-sdhost". ++- clocks: The clock feeding the SDHOST controller. ++ ++Optional properties: ++- dmas: DMA channel for read and write. ++ See Documentation/devicetree/bindings/dma/dma.txt for details ++ ++Example: ++ ++sdhost: mmc@7e202000 { ++ compatible = "brcm,bcm2835-sdhost"; ++ reg = <0x7e202000 0x100>; ++ interrupts = <2 24>; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ dmas = <&dma 13>; ++ dma-names = "rx-tx"; ++}; +From patchwork Wed Mar 8 09:19:03 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,2/7] mmc: bcm2835: Add new driver for the sdhost controller. +From: Gerd Hoffmann +X-Patchwork-Id: 9610701 +Message-Id: <1488964751-22763-4-git-send-email-kraxel@redhat.com> +To: linux-rpi-kernel@lists.infradead.org +Cc: mark.rutland@arm.com, stefan.wahren@i2se.com, ulf.hansson@linaro.org, + f.fainelli@gmail.com, sbranden@broadcom.com, devicetree@vger.kernel.org, + rjui@broadcom.com, lee@kernel.org, will.deacon@arm.com, + linux@armlinux.org.uk, + linux-kernel@vger.kernel.org, eric@anholt.net, robh+dt@kernel.org, + bcm-kernel-feedback-list@broadcom.com, Gerd Hoffmann , + catalin.marinas@arm.com, linux-mmc@vger.kernel.org, + linux-arm-kernel@lists.infradead.org +Date: Wed, 8 Mar 2017 10:19:03 +0100 + +From: Eric Anholt + +The 2835 has two SD controllers: The Arasan sdhci controller (supported +by the iproc driver) and a custom sdhost controller. This patch adds a +driver for the latter. + +The sdhci controller supports both sdcard and sdio. The sdhost +controller supports the sdcard only, but has better performance. Also +note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost +controller allows to use the sdhci controller for wifi support. + +The configuration is done by devicetree via pin muxing. Both SD +controller are available on the same pins (2 pin groups = pin 22 to 27 + +pin 48 to 53). So it's possible to use both SD controllers at the same +time with different pin groups. + +The code was originally written by Phil Elwell in the downstream +Rasbperry Pi tree. In preparation for the upstream merge it was +cleaned up and the code base was moderized by Eric Anholt, Stefan +Wahren and Gerd Hoffmann. + +Signed-off-by: Eric Anholt +Signed-off-by: Stefan Wahren +Signed-off-by: Gerd Hoffmann +--- + drivers/mmc/host/Kconfig | 14 + + drivers/mmc/host/Makefile | 1 + + drivers/mmc/host/bcm2835.c | 1465 ++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 1480 insertions(+) + create mode 100644 drivers/mmc/host/bcm2835.c + +diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig +index f08691a..a638cd0 100644 +--- a/drivers/mmc/host/Kconfig ++++ b/drivers/mmc/host/Kconfig +@@ -799,6 +799,20 @@ config MMC_TOSHIBA_PCI + depends on PCI + help + ++config MMC_BCM2835 ++ tristate "Broadcom BCM2835 SDHOST MMC Controller support" ++ depends on ARCH_BCM2835 || COMPILE_TEST ++ depends on HAS_DMA ++ help ++ This selects the BCM2835 SDHOST MMC controller. If you have ++ a BCM2835 platform with SD or MMC devices, say Y or M here. ++ ++ Note that the BCM2835 has two SD controllers: The Arasan ++ sdhci controller (supported by MMC_SDHCI_IPROC) and a custom ++ sdhost controller (supported by this driver). ++ ++ If unsure, say N. ++ + config MMC_MTK + tristate "MediaTek SD/MMC Card Interface support" + depends on HAS_DMA +diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile +index 6d548c4..bc2c2e2 100644 +--- a/drivers/mmc/host/Makefile ++++ b/drivers/mmc/host/Makefile +@@ -59,6 +59,7 @@ obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o + obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o + obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o + obj-$(CONFIG_MMC_TOSHIBA_PCI) += toshsd.o ++obj-$(CONFIG_MMC_BCM2835) += bcm2835.o + + obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o + obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o +diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c +new file mode 100644 +index 0000000..7d1b0db7 +--- /dev/null ++++ b/drivers/mmc/host/bcm2835.c +@@ -0,0 +1,1465 @@ ++/* ++ * bcm2835 sdhost driver. ++ * ++ * The 2835 has two SD controllers: The Arasan sdhci controller ++ * (supported by the iproc driver) and a custom sdhost controller ++ * (supported by this driver). ++ * ++ * The sdhci controller supports both sdcard and sdio. The sdhost ++ * controller supports the sdcard only, but has better performance. ++ * Also note that the rpi3 has sdio wifi, so driving the sdcard with ++ * the sdhost controller allows to use the sdhci controller for wifi ++ * support. ++ * ++ * The configuration is done by devicetree via pin muxing. Both ++ * SD controller are available on the same pins (2 pin groups = pin 22 ++ * to 27 + pin 48 to 53). So it's possible to use both SD controllers ++ * at the same time with different pin groups. ++ * ++ * Author: Phil Elwell ++ * Copyright (C) 2015-2016 Raspberry Pi (Trading) Ltd. ++ * ++ * Based on ++ * mmc-bcm2835.c by Gellert Weisz ++ * which is, in turn, based on ++ * sdhci-bcm2708.c by Broadcom ++ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko ++ * sdhci.c and sdhci-pci.c by Pierre Ossman ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms and conditions of the GNU General Public License, ++ * version 2, as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. If not, see . ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#define SDCMD 0x00 /* Command to SD card - 16 R/W */ ++#define SDARG 0x04 /* Argument to SD card - 32 R/W */ ++#define SDTOUT 0x08 /* Start value for timeout counter - 32 R/W */ ++#define SDCDIV 0x0c /* Start value for clock divider - 11 R/W */ ++#define SDRSP0 0x10 /* SD card response (31:0) - 32 R */ ++#define SDRSP1 0x14 /* SD card response (63:32) - 32 R */ ++#define SDRSP2 0x18 /* SD card response (95:64) - 32 R */ ++#define SDRSP3 0x1c /* SD card response (127:96) - 32 R */ ++#define SDHSTS 0x20 /* SD host status - 11 R/W */ ++#define SDVDD 0x30 /* SD card power control - 1 R/W */ ++#define SDEDM 0x34 /* Emergency Debug Mode - 13 R/W */ ++#define SDHCFG 0x38 /* Host configuration - 2 R/W */ ++#define SDHBCT 0x3c /* Host byte count (debug) - 32 R/W */ ++#define SDDATA 0x40 /* Data to/from SD card - 32 R/W */ ++#define SDHBLC 0x50 /* Host block count (SDIO/SDHC) - 9 R/W */ ++ ++#define SDCMD_NEW_FLAG 0x8000 ++#define SDCMD_FAIL_FLAG 0x4000 ++#define SDCMD_BUSYWAIT 0x800 ++#define SDCMD_NO_RESPONSE 0x400 ++#define SDCMD_LONG_RESPONSE 0x200 ++#define SDCMD_WRITE_CMD 0x80 ++#define SDCMD_READ_CMD 0x40 ++#define SDCMD_CMD_MASK 0x3f ++ ++#define SDCDIV_MAX_CDIV 0x7ff ++ ++#define SDHSTS_BUSY_IRPT 0x400 ++#define SDHSTS_BLOCK_IRPT 0x200 ++#define SDHSTS_SDIO_IRPT 0x100 ++#define SDHSTS_REW_TIME_OUT 0x80 ++#define SDHSTS_CMD_TIME_OUT 0x40 ++#define SDHSTS_CRC16_ERROR 0x20 ++#define SDHSTS_CRC7_ERROR 0x10 ++#define SDHSTS_FIFO_ERROR 0x08 ++/* Reserved */ ++/* Reserved */ ++#define SDHSTS_DATA_FLAG 0x01 ++ ++#define SDHSTS_TRANSFER_ERROR_MASK (SDHSTS_CRC7_ERROR | \ ++ SDHSTS_CRC16_ERROR | \ ++ SDHSTS_REW_TIME_OUT | \ ++ SDHSTS_FIFO_ERROR) ++ ++#define SDHSTS_ERROR_MASK (SDHSTS_CMD_TIME_OUT | \ ++ SDHSTS_TRANSFER_ERROR_MASK) ++ ++#define SDHCFG_BUSY_IRPT_EN BIT(10) ++#define SDHCFG_BLOCK_IRPT_EN BIT(8) ++#define SDHCFG_SDIO_IRPT_EN BIT(5) ++#define SDHCFG_DATA_IRPT_EN BIT(4) ++#define SDHCFG_SLOW_CARD BIT(3) ++#define SDHCFG_WIDE_EXT_BUS BIT(2) ++#define SDHCFG_WIDE_INT_BUS BIT(1) ++#define SDHCFG_REL_CMD_LINE BIT(0) ++ ++#define SDVDD_POWER_OFF 0 ++#define SDVDD_POWER_ON 1 ++ ++#define SDEDM_FORCE_DATA_MODE BIT(19) ++#define SDEDM_CLOCK_PULSE BIT(20) ++#define SDEDM_BYPASS BIT(21) ++ ++#define SDEDM_WRITE_THRESHOLD_SHIFT 9 ++#define SDEDM_READ_THRESHOLD_SHIFT 14 ++#define SDEDM_THRESHOLD_MASK 0x1f ++ ++#define SDEDM_FSM_MASK 0xf ++#define SDEDM_FSM_IDENTMODE 0x0 ++#define SDEDM_FSM_DATAMODE 0x1 ++#define SDEDM_FSM_READDATA 0x2 ++#define SDEDM_FSM_WRITEDATA 0x3 ++#define SDEDM_FSM_READWAIT 0x4 ++#define SDEDM_FSM_READCRC 0x5 ++#define SDEDM_FSM_WRITECRC 0x6 ++#define SDEDM_FSM_WRITEWAIT1 0x7 ++#define SDEDM_FSM_POWERDOWN 0x8 ++#define SDEDM_FSM_POWERUP 0x9 ++#define SDEDM_FSM_WRITESTART1 0xa ++#define SDEDM_FSM_WRITESTART2 0xb ++#define SDEDM_FSM_GENPULSES 0xc ++#define SDEDM_FSM_WRITEWAIT2 0xd ++#define SDEDM_FSM_STARTPOWDOWN 0xf ++ ++#define SDDATA_FIFO_WORDS 16 ++ ++#define FIFO_READ_THRESHOLD 4 ++#define FIFO_WRITE_THRESHOLD 4 ++#define SDDATA_FIFO_PIO_BURST 8 ++ ++#define PIO_THRESHOLD 1 /* Maximum block count for PIO (0 = always DMA) */ ++ ++struct bcm2835_host { ++ spinlock_t lock; ++ struct mutex mutex; ++ ++ void __iomem *ioaddr; ++ u32 phys_addr; ++ ++ struct mmc_host *mmc; ++ struct platform_device *pdev; ++ ++ int clock; /* Current clock speed */ ++ unsigned int max_clk; /* Max possible freq */ ++ struct work_struct dma_work; ++ struct delayed_work timeout_work; /* Timer for timeouts */ ++ struct sg_mapping_iter sg_miter; /* SG state for PIO */ ++ unsigned int blocks; /* remaining PIO blocks */ ++ int irq; /* Device IRQ */ ++ ++ u32 ns_per_fifo_word; ++ ++ /* cached registers */ ++ u32 hcfg; ++ u32 cdiv; ++ ++ struct mmc_request *mrq; /* Current request */ ++ struct mmc_command *cmd; /* Current command */ ++ struct mmc_data *data; /* Current data request */ ++ bool data_complete:1;/* Data finished before cmd */ ++ bool use_busy:1; /* Wait for busy interrupt */ ++ bool use_sbc:1; /* Send CMD23 */ ++ ++ /* for threaded irq handler */ ++ bool irq_block; ++ bool irq_busy; ++ bool irq_data; ++ ++ /* DMA part */ ++ struct dma_chan *dma_chan_rxtx; ++ struct dma_chan *dma_chan; ++ struct dma_slave_config dma_cfg_rx; ++ struct dma_slave_config dma_cfg_tx; ++ struct dma_async_tx_descriptor *dma_desc; ++ u32 dma_dir; ++ u32 drain_words; ++ struct page *drain_page; ++ u32 drain_offset; ++ bool use_dma; ++}; ++ ++static void bcm2835_dumpcmd(struct bcm2835_host *host, struct mmc_command *cmd, ++ const char *label) ++{ ++ struct device *dev = &host->pdev->dev; ++ ++ if (!cmd) ++ return; ++ ++ dev_dbg(dev, "%c%s op %d arg 0x%x flags 0x%x - resp %08x %08x %08x %08x, err %d\n", ++ (cmd == host->cmd) ? '>' : ' ', ++ label, cmd->opcode, cmd->arg, cmd->flags, ++ cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], ++ cmd->error); ++} ++ ++static void bcm2835_dumpregs(struct bcm2835_host *host) ++{ ++ struct mmc_request *mrq = host->mrq; ++ struct device *dev = &host->pdev->dev; ++ ++ if (mrq) { ++ bcm2835_dumpcmd(host, mrq->sbc, "sbc"); ++ bcm2835_dumpcmd(host, mrq->cmd, "cmd"); ++ if (mrq->data) { ++ dev_dbg(dev, "data blocks %x blksz %x - err %d\n", ++ mrq->data->blocks, ++ mrq->data->blksz, ++ mrq->data->error); ++ } ++ bcm2835_dumpcmd(host, mrq->stop, "stop"); ++ } ++ ++ dev_dbg(dev, "=========== REGISTER DUMP ===========\n"); ++ dev_dbg(dev, "SDCMD 0x%08x\n", readl(host->ioaddr + SDCMD)); ++ dev_dbg(dev, "SDARG 0x%08x\n", readl(host->ioaddr + SDARG)); ++ dev_dbg(dev, "SDTOUT 0x%08x\n", readl(host->ioaddr + SDTOUT)); ++ dev_dbg(dev, "SDCDIV 0x%08x\n", readl(host->ioaddr + SDCDIV)); ++ dev_dbg(dev, "SDRSP0 0x%08x\n", readl(host->ioaddr + SDRSP0)); ++ dev_dbg(dev, "SDRSP1 0x%08x\n", readl(host->ioaddr + SDRSP1)); ++ dev_dbg(dev, "SDRSP2 0x%08x\n", readl(host->ioaddr + SDRSP2)); ++ dev_dbg(dev, "SDRSP3 0x%08x\n", readl(host->ioaddr + SDRSP3)); ++ dev_dbg(dev, "SDHSTS 0x%08x\n", readl(host->ioaddr + SDHSTS)); ++ dev_dbg(dev, "SDVDD 0x%08x\n", readl(host->ioaddr + SDVDD)); ++ dev_dbg(dev, "SDEDM 0x%08x\n", readl(host->ioaddr + SDEDM)); ++ dev_dbg(dev, "SDHCFG 0x%08x\n", readl(host->ioaddr + SDHCFG)); ++ dev_dbg(dev, "SDHBCT 0x%08x\n", readl(host->ioaddr + SDHBCT)); ++ dev_dbg(dev, "SDHBLC 0x%08x\n", readl(host->ioaddr + SDHBLC)); ++ dev_dbg(dev, "===========================================\n"); ++} ++ ++static void bcm2835_reset_internal(struct bcm2835_host *host) ++{ ++ u32 temp; ++ ++ writel(SDVDD_POWER_OFF, host->ioaddr + SDVDD); ++ writel(0, host->ioaddr + SDCMD); ++ writel(0, host->ioaddr + SDARG); ++ writel(0xf00000, host->ioaddr + SDTOUT); ++ writel(0, host->ioaddr + SDCDIV); ++ writel(0x7f8, host->ioaddr + SDHSTS); /* Write 1s to clear */ ++ writel(0, host->ioaddr + SDHCFG); ++ writel(0, host->ioaddr + SDHBCT); ++ writel(0, host->ioaddr + SDHBLC); ++ ++ /* Limit fifo usage due to silicon bug */ ++ temp = readl(host->ioaddr + SDEDM); ++ temp &= ~((SDEDM_THRESHOLD_MASK << SDEDM_READ_THRESHOLD_SHIFT) | ++ (SDEDM_THRESHOLD_MASK << SDEDM_WRITE_THRESHOLD_SHIFT)); ++ temp |= (FIFO_READ_THRESHOLD << SDEDM_READ_THRESHOLD_SHIFT) | ++ (FIFO_WRITE_THRESHOLD << SDEDM_WRITE_THRESHOLD_SHIFT); ++ writel(temp, host->ioaddr + SDEDM); ++ msleep(20); ++ writel(SDVDD_POWER_ON, host->ioaddr + SDVDD); ++ msleep(20); ++ host->clock = 0; ++ writel(host->hcfg, host->ioaddr + SDHCFG); ++ writel(host->cdiv, host->ioaddr + SDCDIV); ++} ++ ++static void bcm2835_reset(struct mmc_host *mmc) ++{ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ ++ if (host->dma_chan) ++ dmaengine_terminate_sync(host->dma_chan); ++ bcm2835_reset_internal(host); ++} ++ ++static void bcm2835_finish_command(struct bcm2835_host *host); ++ ++static void bcm2835_wait_transfer_complete(struct bcm2835_host *host) ++{ ++ int timediff; ++ u32 alternate_idle; ++ ++ alternate_idle = (host->mrq->data->flags & MMC_DATA_READ) ? ++ SDEDM_FSM_READWAIT : SDEDM_FSM_WRITESTART1; ++ ++ timediff = 0; ++ ++ while (1) { ++ u32 edm, fsm; ++ ++ edm = readl(host->ioaddr + SDEDM); ++ fsm = edm & SDEDM_FSM_MASK; ++ ++ if ((fsm == SDEDM_FSM_IDENTMODE) || ++ (fsm == SDEDM_FSM_DATAMODE)) ++ break; ++ if (fsm == alternate_idle) { ++ writel(edm | SDEDM_FORCE_DATA_MODE, ++ host->ioaddr + SDEDM); ++ break; ++ } ++ ++ timediff++; ++ if (timediff == 100000) { ++ dev_err(&host->pdev->dev, ++ "wait_transfer_complete - still waiting after %d retries\n", ++ timediff); ++ bcm2835_dumpregs(host); ++ host->mrq->data->error = -ETIMEDOUT; ++ return; ++ } ++ cpu_relax(); ++ } ++} ++ ++static void bcm2835_dma_complete(void *param) ++{ ++ struct bcm2835_host *host = param; ++ ++ schedule_work(&host->dma_work); ++} ++ ++static void bcm2835_transfer_block_pio(struct bcm2835_host *host, bool is_read) ++{ ++ unsigned long flags; ++ size_t blksize; ++ unsigned long wait_max; ++ ++ blksize = host->data->blksz; ++ ++ wait_max = jiffies + msecs_to_jiffies(500); ++ ++ local_irq_save(flags); ++ ++ while (blksize) { ++ int copy_words; ++ u32 hsts = 0; ++ size_t len; ++ u32 *buf; ++ ++ if (!sg_miter_next(&host->sg_miter)) { ++ host->data->error = -EINVAL; ++ break; ++ } ++ ++ len = min(host->sg_miter.length, blksize); ++ if (len % 4) { ++ host->data->error = -EINVAL; ++ break; ++ } ++ ++ blksize -= len; ++ host->sg_miter.consumed = len; ++ ++ buf = (u32 *)host->sg_miter.addr; ++ ++ copy_words = len / 4; ++ ++ while (copy_words) { ++ int burst_words, words; ++ u32 edm; ++ ++ burst_words = min(SDDATA_FIFO_PIO_BURST, copy_words); ++ edm = readl(host->ioaddr + SDEDM); ++ if (is_read) ++ words = ((edm >> 4) & 0x1f); ++ else ++ words = SDDATA_FIFO_WORDS - ((edm >> 4) & 0x1f); ++ ++ if (words < burst_words) { ++ int fsm_state = (edm & SDEDM_FSM_MASK); ++ struct device *dev = &host->pdev->dev; ++ ++ if ((is_read && ++ (fsm_state != SDEDM_FSM_READDATA && ++ fsm_state != SDEDM_FSM_READWAIT && ++ fsm_state != SDEDM_FSM_READCRC)) || ++ (!is_read && ++ (fsm_state != SDEDM_FSM_WRITEDATA && ++ fsm_state != SDEDM_FSM_WRITESTART1 && ++ fsm_state != SDEDM_FSM_WRITESTART2))) { ++ hsts = readl(host->ioaddr + SDHSTS); ++ dev_err(dev, "fsm %x, hsts %08x\n", ++ fsm_state, hsts); ++ if (hsts & SDHSTS_ERROR_MASK) ++ break; ++ } ++ ++ if (time_after(jiffies, wait_max)) { ++ dev_err(dev, "PIO %s timeout - EDM %08x\n", ++ is_read ? "read" : "write", ++ edm); ++ hsts = SDHSTS_REW_TIME_OUT; ++ break; ++ } ++ ndelay((burst_words - words) * ++ host->ns_per_fifo_word); ++ continue; ++ } else if (words > copy_words) { ++ words = copy_words; ++ } ++ ++ copy_words -= words; ++ ++ while (words) { ++ if (is_read) ++ *(buf++) = readl(host->ioaddr + SDDATA); ++ else ++ writel(*(buf++), host->ioaddr + SDDATA); ++ words--; ++ } ++ } ++ ++ if (hsts & SDHSTS_ERROR_MASK) ++ break; ++ } ++ ++ sg_miter_stop(&host->sg_miter); ++ ++ local_irq_restore(flags); ++} ++ ++static void bcm2835_transfer_pio(struct bcm2835_host *host) ++{ ++ struct device *dev = &host->pdev->dev; ++ u32 sdhsts; ++ bool is_read; ++ ++ is_read = (host->data->flags & MMC_DATA_READ) != 0; ++ bcm2835_transfer_block_pio(host, is_read); ++ ++ sdhsts = readl(host->ioaddr + SDHSTS); ++ if (sdhsts & (SDHSTS_CRC16_ERROR | ++ SDHSTS_CRC7_ERROR | ++ SDHSTS_FIFO_ERROR)) { ++ dev_err(dev, "%s transfer error - HSTS %08x\n", ++ is_read ? "read" : "write", sdhsts); ++ host->data->error = -EILSEQ; ++ } else if ((sdhsts & (SDHSTS_CMD_TIME_OUT | ++ SDHSTS_REW_TIME_OUT))) { ++ dev_err(dev, "%s timeout error - HSTS %08x\n", ++ is_read ? "read" : "write", sdhsts); ++ host->data->error = -ETIMEDOUT; ++ } ++} ++ ++static ++void bcm2835_prepare_dma(struct bcm2835_host *host, struct mmc_data *data) ++{ ++ int len, dir_data, dir_slave; ++ struct dma_async_tx_descriptor *desc = NULL; ++ struct dma_chan *dma_chan; ++ ++ dma_chan = host->dma_chan_rxtx; ++ if (data->flags & MMC_DATA_READ) { ++ dir_data = DMA_FROM_DEVICE; ++ dir_slave = DMA_DEV_TO_MEM; ++ } else { ++ dir_data = DMA_TO_DEVICE; ++ dir_slave = DMA_MEM_TO_DEV; ++ } ++ ++ /* The block doesn't manage the FIFO DREQs properly for ++ * multi-block transfers, so don't attempt to DMA the final ++ * few words. Unfortunately this requires the final sg entry ++ * to be trimmed. N.B. This code demands that the overspill ++ * is contained in a single sg entry. ++ */ ++ ++ host->drain_words = 0; ++ if ((data->blocks > 1) && (dir_data == DMA_FROM_DEVICE)) { ++ struct scatterlist *sg; ++ u32 len; ++ int i; ++ ++ len = min((u32)(FIFO_READ_THRESHOLD - 1) * 4, ++ (u32)data->blocks * data->blksz); ++ ++ for_each_sg(data->sg, sg, data->sg_len, i) { ++ if (sg_is_last(sg)) { ++ WARN_ON(sg->length < len); ++ sg->length -= len; ++ host->drain_page = sg_page(sg); ++ host->drain_offset = sg->offset + sg->length; ++ } ++ } ++ host->drain_words = len / 4; ++ } ++ ++ /* The parameters have already been validated, so this will not fail */ ++ (void)dmaengine_slave_config(dma_chan, ++ (dir_data == DMA_FROM_DEVICE) ? ++ &host->dma_cfg_rx : ++ &host->dma_cfg_tx); ++ ++ len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len, ++ dir_data); ++ ++ if (len > 0) { ++ desc = dmaengine_prep_slave_sg(dma_chan, data->sg, ++ len, dir_slave, ++ DMA_PREP_INTERRUPT | ++ DMA_CTRL_ACK); ++ } ++ ++ if (desc) { ++ desc->callback = bcm2835_dma_complete; ++ desc->callback_param = host; ++ host->dma_desc = desc; ++ host->dma_chan = dma_chan; ++ host->dma_dir = dir_data; ++ } ++} ++ ++static void bcm2835_start_dma(struct bcm2835_host *host) ++{ ++ dmaengine_submit(host->dma_desc); ++ dma_async_issue_pending(host->dma_chan); ++} ++ ++static void bcm2835_set_transfer_irqs(struct bcm2835_host *host) ++{ ++ u32 all_irqs = SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN | ++ SDHCFG_BUSY_IRPT_EN; ++ ++ if (host->dma_desc) { ++ host->hcfg = (host->hcfg & ~all_irqs) | ++ SDHCFG_BUSY_IRPT_EN; ++ } else { ++ host->hcfg = (host->hcfg & ~all_irqs) | ++ SDHCFG_DATA_IRPT_EN | ++ SDHCFG_BUSY_IRPT_EN; ++ } ++ ++ writel(host->hcfg, host->ioaddr + SDHCFG); ++} ++ ++static ++void bcm2835_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd) ++{ ++ struct mmc_data *data = cmd->data; ++ ++ WARN_ON(host->data); ++ ++ host->data = data; ++ if (!data) ++ return; ++ ++ host->data_complete = false; ++ host->data->bytes_xfered = 0; ++ ++ if (!host->dma_desc) { ++ /* Use PIO */ ++ int flags = SG_MITER_ATOMIC; ++ ++ if (data->flags & MMC_DATA_READ) ++ flags |= SG_MITER_TO_SG; ++ else ++ flags |= SG_MITER_FROM_SG; ++ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); ++ host->blocks = data->blocks; ++ } ++ ++ bcm2835_set_transfer_irqs(host); ++ ++ writel(data->blksz, host->ioaddr + SDHBCT); ++ writel(data->blocks, host->ioaddr + SDHBLC); ++} ++ ++static u32 bcm2835_read_wait_sdcmd(struct bcm2835_host *host, u32 max_ms) ++{ ++ struct device *dev = &host->pdev->dev; ++ u32 value; ++ int ret; ++ ++ ret = readl_poll_timeout(host->ioaddr + SDCMD, value, ++ !(value & SDCMD_NEW_FLAG), 1, 10); ++ if (ret == -ETIMEDOUT) ++ /* if it takes a while make poll interval bigger */ ++ ret = readl_poll_timeout(host->ioaddr + SDCMD, value, ++ !(value & SDCMD_NEW_FLAG), ++ 10, max_ms * 1000); ++ if (ret == -ETIMEDOUT) ++ dev_err(dev, "%s: timeout (%d ms)\n", __func__, max_ms); ++ ++ return value; ++} ++ ++static void bcm2835_finish_request(struct bcm2835_host *host) ++{ ++ struct dma_chan *terminate_chan = NULL; ++ struct mmc_request *mrq; ++ ++ cancel_delayed_work(&host->timeout_work); ++ ++ mrq = host->mrq; ++ ++ host->mrq = NULL; ++ host->cmd = NULL; ++ host->data = NULL; ++ ++ host->dma_desc = NULL; ++ terminate_chan = host->dma_chan; ++ host->dma_chan = NULL; ++ ++ if (terminate_chan) { ++ int err = dmaengine_terminate_all(terminate_chan); ++ ++ if (err) ++ dev_err(&host->pdev->dev, ++ "failed to terminate DMA (%d)\n", err); ++ } ++ ++ mmc_request_done(host->mmc, mrq); ++} ++ ++static ++bool bcm2835_send_command(struct bcm2835_host *host, struct mmc_command *cmd) ++{ ++ struct device *dev = &host->pdev->dev; ++ u32 sdcmd, sdhsts; ++ unsigned long timeout; ++ ++ WARN_ON(host->cmd); ++ ++ sdcmd = bcm2835_read_wait_sdcmd(host, 100); ++ if (sdcmd & SDCMD_NEW_FLAG) { ++ dev_err(dev, "previous command never completed.\n"); ++ bcm2835_dumpregs(host); ++ cmd->error = -EILSEQ; ++ bcm2835_finish_request(host); ++ return false; ++ } ++ ++ if (!cmd->data && cmd->busy_timeout > 9000) ++ timeout = DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; ++ else ++ timeout = 10 * HZ; ++ schedule_delayed_work(&host->timeout_work, timeout); ++ ++ host->cmd = cmd; ++ ++ /* Clear any error flags */ ++ sdhsts = readl(host->ioaddr + SDHSTS); ++ if (sdhsts & SDHSTS_ERROR_MASK) ++ writel(sdhsts, host->ioaddr + SDHSTS); ++ ++ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { ++ dev_err(dev, "unsupported response type!\n"); ++ cmd->error = -EINVAL; ++ bcm2835_finish_request(host); ++ return false; ++ } ++ ++ bcm2835_prepare_data(host, cmd); ++ ++ writel(cmd->arg, host->ioaddr + SDARG); ++ ++ sdcmd = cmd->opcode & SDCMD_CMD_MASK; ++ ++ host->use_busy = false; ++ if (!(cmd->flags & MMC_RSP_PRESENT)) { ++ sdcmd |= SDCMD_NO_RESPONSE; ++ } else { ++ if (cmd->flags & MMC_RSP_136) ++ sdcmd |= SDCMD_LONG_RESPONSE; ++ if (cmd->flags & MMC_RSP_BUSY) { ++ sdcmd |= SDCMD_BUSYWAIT; ++ host->use_busy = true; ++ } ++ } ++ ++ if (cmd->data) { ++ if (cmd->data->flags & MMC_DATA_WRITE) ++ sdcmd |= SDCMD_WRITE_CMD; ++ if (cmd->data->flags & MMC_DATA_READ) ++ sdcmd |= SDCMD_READ_CMD; ++ } ++ ++ writel(sdcmd | SDCMD_NEW_FLAG, host->ioaddr + SDCMD); ++ ++ return true; ++} ++ ++static void bcm2835_transfer_complete(struct bcm2835_host *host) ++{ ++ struct mmc_data *data; ++ ++ WARN_ON(!host->data_complete); ++ ++ data = host->data; ++ host->data = NULL; ++ ++ /* Need to send CMD12 if - ++ * a) open-ended multiblock transfer (no CMD23) ++ * b) error in multiblock transfer ++ */ ++ if (host->mrq->stop && (data->error || !host->use_sbc)) { ++ if (bcm2835_send_command(host, host->mrq->stop)) { ++ /* No busy, so poll for completion */ ++ if (!host->use_busy) ++ bcm2835_finish_command(host); ++ } ++ } else { ++ bcm2835_wait_transfer_complete(host); ++ bcm2835_finish_request(host); ++ } ++} ++ ++static void bcm2835_finish_data(struct bcm2835_host *host) ++{ ++ struct device *dev = &host->pdev->dev; ++ struct mmc_data *data; ++ ++ data = host->data; ++ ++ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN); ++ writel(host->hcfg, host->ioaddr + SDHCFG); ++ ++ data->bytes_xfered = data->error ? 0 : (data->blksz * data->blocks); ++ ++ host->data_complete = true; ++ ++ if (host->cmd) { ++ /* Data managed to finish before the ++ * command completed. Make sure we do ++ * things in the proper order. ++ */ ++ dev_dbg(dev, "Finished early - HSTS %08x\n", ++ readl(host->ioaddr + SDHSTS)); ++ } else { ++ bcm2835_transfer_complete(host); ++ } ++} ++ ++static void bcm2835_finish_command(struct bcm2835_host *host) ++{ ++ struct device *dev = &host->pdev->dev; ++ struct mmc_command *cmd = host->cmd; ++ u32 sdcmd; ++ ++ sdcmd = bcm2835_read_wait_sdcmd(host, 100); ++ ++ /* Check for errors */ ++ if (sdcmd & SDCMD_NEW_FLAG) { ++ dev_err(dev, "command never completed.\n"); ++ bcm2835_dumpregs(host); ++ host->cmd->error = -EIO; ++ bcm2835_finish_request(host); ++ return; ++ } else if (sdcmd & SDCMD_FAIL_FLAG) { ++ u32 sdhsts = readl(host->ioaddr + SDHSTS); ++ ++ /* Clear the errors */ ++ writel(SDHSTS_ERROR_MASK, host->ioaddr + SDHSTS); ++ ++ if (!(sdhsts & SDHSTS_CRC7_ERROR) || ++ (host->cmd->opcode != MMC_SEND_OP_COND)) { ++ if (sdhsts & SDHSTS_CMD_TIME_OUT) { ++ host->cmd->error = -ETIMEDOUT; ++ } else { ++ dev_err(dev, "unexpected command %d error\n", ++ host->cmd->opcode); ++ bcm2835_dumpregs(host); ++ host->cmd->error = -EILSEQ; ++ } ++ bcm2835_finish_request(host); ++ return; ++ } ++ } ++ ++ if (cmd->flags & MMC_RSP_PRESENT) { ++ if (cmd->flags & MMC_RSP_136) { ++ int i; ++ ++ for (i = 0; i < 4; i++) { ++ cmd->resp[3 - i] = ++ readl(host->ioaddr + SDRSP0 + i * 4); ++ } ++ } else { ++ cmd->resp[0] = readl(host->ioaddr + SDRSP0); ++ } ++ } ++ ++ if (cmd == host->mrq->sbc) { ++ /* Finished CMD23, now send actual command. */ ++ host->cmd = NULL; ++ if (bcm2835_send_command(host, host->mrq->cmd)) { ++ if (host->data && host->dma_desc) ++ /* DMA transfer starts now, PIO starts ++ * after irq ++ */ ++ bcm2835_start_dma(host); ++ ++ if (!host->use_busy) ++ bcm2835_finish_command(host); ++ } ++ } else if (cmd == host->mrq->stop) { ++ /* Finished CMD12 */ ++ bcm2835_finish_request(host); ++ } else { ++ /* Processed actual command. */ ++ host->cmd = NULL; ++ if (!host->data) ++ bcm2835_finish_request(host); ++ else if (host->data_complete) ++ bcm2835_transfer_complete(host); ++ } ++} ++ ++static void bcm2835_timeout(struct work_struct *work) ++{ ++ struct delayed_work *d = to_delayed_work(work); ++ struct bcm2835_host *host = ++ container_of(d, struct bcm2835_host, timeout_work); ++ struct device *dev = &host->pdev->dev; ++ ++ mutex_lock(&host->mutex); ++ ++ if (host->mrq) { ++ dev_err(dev, "timeout waiting for hardware interrupt.\n"); ++ bcm2835_dumpregs(host); ++ ++ if (host->data) { ++ host->data->error = -ETIMEDOUT; ++ bcm2835_finish_data(host); ++ } else { ++ if (host->cmd) ++ host->cmd->error = -ETIMEDOUT; ++ else ++ host->mrq->cmd->error = -ETIMEDOUT; ++ ++ bcm2835_finish_request(host); ++ } ++ } ++ ++ mutex_unlock(&host->mutex); ++} ++ ++static bool bcm2835_check_cmd_error(struct bcm2835_host *host, u32 intmask) ++{ ++ struct device *dev = &host->pdev->dev; ++ ++ if (!(intmask & SDHSTS_ERROR_MASK)) ++ return false; ++ ++ if (!host->cmd) ++ return true; ++ ++ dev_err(dev, "sdhost_busy_irq: intmask %08x\n", intmask); ++ if (intmask & SDHSTS_CRC7_ERROR) { ++ host->cmd->error = -EILSEQ; ++ } else if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR)) { ++ if (host->mrq->data) ++ host->mrq->data->error = -EILSEQ; ++ else ++ host->cmd->error = -EILSEQ; ++ } else if (intmask & SDHSTS_REW_TIME_OUT) { ++ if (host->mrq->data) ++ host->mrq->data->error = -ETIMEDOUT; ++ else ++ host->cmd->error = -ETIMEDOUT; ++ } else if (intmask & SDHSTS_CMD_TIME_OUT) { ++ host->cmd->error = -ETIMEDOUT; ++ } ++ bcm2835_dumpregs(host); ++ return true; ++} ++ ++static void bcm2835_check_data_error(struct bcm2835_host *host, u32 intmask) ++{ ++ if (!host->data) ++ return; ++ if (intmask & (SDHSTS_CRC16_ERROR | SDHSTS_FIFO_ERROR)) ++ host->data->error = -EILSEQ; ++ if (intmask & SDHSTS_REW_TIME_OUT) ++ host->data->error = -ETIMEDOUT; ++} ++ ++static void bcm2835_busy_irq(struct bcm2835_host *host) ++{ ++ if (WARN_ON(!host->cmd)) { ++ bcm2835_dumpregs(host); ++ return; ++ } ++ ++ if (WARN_ON(!host->use_busy)) { ++ bcm2835_dumpregs(host); ++ return; ++ } ++ host->use_busy = false; ++ ++ bcm2835_finish_command(host); ++} ++ ++static void bcm2835_data_irq(struct bcm2835_host *host, u32 intmask) ++{ ++ /* There are no dedicated data/space available interrupt ++ * status bits, so it is necessary to use the single shared ++ * data/space available FIFO status bits. It is therefore not ++ * an error to get here when there is no data transfer in ++ * progress. ++ */ ++ if (!host->data) ++ return; ++ ++ bcm2835_check_data_error(host, intmask); ++ if (host->data->error) ++ goto finished; ++ ++ if (host->data->flags & MMC_DATA_WRITE) { ++ /* Use the block interrupt for writes after the first block */ ++ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN); ++ host->hcfg |= SDHCFG_BLOCK_IRPT_EN; ++ writel(host->hcfg, host->ioaddr + SDHCFG); ++ bcm2835_transfer_pio(host); ++ } else { ++ bcm2835_transfer_pio(host); ++ host->blocks--; ++ if ((host->blocks == 0) || host->data->error) ++ goto finished; ++ } ++ return; ++ ++finished: ++ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN); ++ writel(host->hcfg, host->ioaddr + SDHCFG); ++} ++ ++static void bcm2835_data_threaded_irq(struct bcm2835_host *host) ++{ ++ if (!host->data) ++ return; ++ if ((host->blocks == 0) || host->data->error) ++ bcm2835_finish_data(host); ++} ++ ++static void bcm2835_block_irq(struct bcm2835_host *host) ++{ ++ if (WARN_ON(!host->data)) { ++ bcm2835_dumpregs(host); ++ return; ++ } ++ ++ if (!host->dma_desc) { ++ WARN_ON(!host->blocks); ++ if (host->data->error || (--host->blocks == 0)) ++ bcm2835_finish_data(host); ++ else ++ bcm2835_transfer_pio(host); ++ } else if (host->data->flags & MMC_DATA_WRITE) { ++ bcm2835_finish_data(host); ++ } ++} ++ ++static irqreturn_t bcm2835_irq(int irq, void *dev_id) ++{ ++ irqreturn_t result = IRQ_NONE; ++ struct bcm2835_host *host = dev_id; ++ u32 intmask; ++ ++ spin_lock(&host->lock); ++ ++ intmask = readl(host->ioaddr + SDHSTS); ++ ++ writel(SDHSTS_BUSY_IRPT | ++ SDHSTS_BLOCK_IRPT | ++ SDHSTS_SDIO_IRPT | ++ SDHSTS_DATA_FLAG, ++ host->ioaddr + SDHSTS); ++ ++ if (intmask & SDHSTS_BLOCK_IRPT) { ++ bcm2835_check_data_error(host, intmask); ++ host->irq_block = true; ++ result = IRQ_WAKE_THREAD; ++ } ++ ++ if (intmask & SDHSTS_BUSY_IRPT) { ++ if (!bcm2835_check_cmd_error(host, intmask)) { ++ host->irq_busy = true; ++ result = IRQ_WAKE_THREAD; ++ } else { ++ result = IRQ_HANDLED; ++ } ++ } ++ ++ /* There is no true data interrupt status bit, so it is ++ * necessary to qualify the data flag with the interrupt ++ * enable bit. ++ */ ++ if ((intmask & SDHSTS_DATA_FLAG) && ++ (host->hcfg & SDHCFG_DATA_IRPT_EN)) { ++ bcm2835_data_irq(host, intmask); ++ host->irq_data = true; ++ result = IRQ_WAKE_THREAD; ++ } ++ ++ spin_unlock(&host->lock); ++ ++ return result; ++} ++ ++static irqreturn_t bcm2835_threaded_irq(int irq, void *dev_id) ++{ ++ struct bcm2835_host *host = dev_id; ++ unsigned long flags; ++ bool block, busy, data; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ block = host->irq_block; ++ busy = host->irq_busy; ++ data = host->irq_data; ++ host->irq_block = false; ++ host->irq_busy = false; ++ host->irq_data = false; ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ mutex_lock(&host->mutex); ++ ++ if (block) ++ bcm2835_block_irq(host); ++ if (busy) ++ bcm2835_busy_irq(host); ++ if (data) ++ bcm2835_data_threaded_irq(host); ++ ++ mutex_unlock(&host->mutex); ++ ++ return IRQ_HANDLED; ++} ++ ++static void bcm2835_dma_complete_work(struct work_struct *work) ++{ ++ struct bcm2835_host *host = ++ container_of(work, struct bcm2835_host, dma_work); ++ struct mmc_data *data = host->data; ++ ++ mutex_lock(&host->mutex); ++ ++ if (host->dma_chan) { ++ dma_unmap_sg(host->dma_chan->device->dev, ++ data->sg, data->sg_len, ++ host->dma_dir); ++ ++ host->dma_chan = NULL; ++ } ++ ++ if (host->drain_words) { ++ unsigned long flags; ++ void *page; ++ u32 *buf; ++ ++ if (host->drain_offset & PAGE_MASK) { ++ host->drain_page += host->drain_offset >> PAGE_SHIFT; ++ host->drain_offset &= ~PAGE_MASK; ++ } ++ local_irq_save(flags); ++ page = kmap_atomic(host->drain_page); ++ buf = page + host->drain_offset; ++ ++ while (host->drain_words) { ++ u32 edm = readl(host->ioaddr + SDEDM); ++ ++ if ((edm >> 4) & 0x1f) ++ *(buf++) = readl(host->ioaddr + SDDATA); ++ host->drain_words--; ++ } ++ ++ kunmap_atomic(page); ++ local_irq_restore(flags); ++ } ++ ++ bcm2835_finish_data(host); ++ ++ mutex_unlock(&host->mutex); ++} ++ ++static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock) ++{ ++ int div; ++ ++ /* The SDCDIV register has 11 bits, and holds (div - 2). But ++ * in data mode the max is 50MHz wihout a minimum, and only ++ * the bottom 3 bits are used. Since the switch over is ++ * automatic (unless we have marked the card as slow...), ++ * chosen values have to make sense in both modes. Ident mode ++ * must be 100-400KHz, so can range check the requested ++ * clock. CMD15 must be used to return to data mode, so this ++ * can be monitored. ++ * ++ * clock 250MHz -> 0->125MHz, 1->83.3MHz, 2->62.5MHz, 3->50.0MHz ++ * 4->41.7MHz, 5->35.7MHz, 6->31.3MHz, 7->27.8MHz ++ * ++ * 623->400KHz/27.8MHz ++ * reset value (507)->491159/50MHz ++ * ++ * BUT, the 3-bit clock divisor in data mode is too small if ++ * the core clock is higher than 250MHz, so instead use the ++ * SLOW_CARD configuration bit to force the use of the ident ++ * clock divisor at all times. ++ */ ++ ++ if (clock < 100000) { ++ /* Can't stop the clock, but make it as slow as possible ++ * to show willing ++ */ ++ host->cdiv = SDCDIV_MAX_CDIV; ++ writel(host->cdiv, host->ioaddr + SDCDIV); ++ return; ++ } ++ ++ div = host->max_clk / clock; ++ if (div < 2) ++ div = 2; ++ if ((host->max_clk / div) > clock) ++ div++; ++ div -= 2; ++ ++ if (div > SDCDIV_MAX_CDIV) ++ div = SDCDIV_MAX_CDIV; ++ ++ clock = host->max_clk / (div + 2); ++ host->mmc->actual_clock = clock; ++ ++ /* Calibrate some delays */ ++ ++ host->ns_per_fifo_word = (1000000000 / clock) * ++ ((host->mmc->caps & MMC_CAP_4_BIT_DATA) ? 8 : 32); ++ ++ host->cdiv = div; ++ writel(host->cdiv, host->ioaddr + SDCDIV); ++ ++ /* Set the timeout to 500ms */ ++ writel(host->mmc->actual_clock / 2, host->ioaddr + SDTOUT); ++} ++ ++static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ struct device *dev = &host->pdev->dev; ++ u32 edm, fsm; ++ ++ /* Reset the error statuses in case this is a retry */ ++ if (mrq->sbc) ++ mrq->sbc->error = 0; ++ if (mrq->cmd) ++ mrq->cmd->error = 0; ++ if (mrq->data) ++ mrq->data->error = 0; ++ if (mrq->stop) ++ mrq->stop->error = 0; ++ ++ if (mrq->data && !is_power_of_2(mrq->data->blksz)) { ++ dev_err(dev, "unsupported block size (%d bytes)\n", ++ mrq->data->blksz); ++ mrq->cmd->error = -EINVAL; ++ mmc_request_done(mmc, mrq); ++ return; ++ } ++ ++ if (host->use_dma && mrq->data && (mrq->data->blocks > PIO_THRESHOLD)) ++ bcm2835_prepare_dma(host, mrq->data); ++ ++ mutex_lock(&host->mutex); ++ ++ WARN_ON(host->mrq); ++ host->mrq = mrq; ++ ++ edm = readl(host->ioaddr + SDEDM); ++ fsm = edm & SDEDM_FSM_MASK; ++ ++ if ((fsm != SDEDM_FSM_IDENTMODE) && ++ (fsm != SDEDM_FSM_DATAMODE)) { ++ dev_err(dev, "previous command (%d) not complete (EDM %08x)\n", ++ readl(host->ioaddr + SDCMD) & SDCMD_CMD_MASK, ++ edm); ++ bcm2835_dumpregs(host); ++ mrq->cmd->error = -EILSEQ; ++ bcm2835_finish_request(host); ++ mutex_unlock(&host->mutex); ++ return; ++ } ++ ++ host->use_sbc = !!mrq->sbc && (host->mrq->data->flags & MMC_DATA_READ); ++ if (host->use_sbc) { ++ if (bcm2835_send_command(host, mrq->sbc)) { ++ if (!host->use_busy) ++ bcm2835_finish_command(host); ++ } ++ } else if (bcm2835_send_command(host, mrq->cmd)) { ++ if (host->data && host->dma_desc) { ++ /* DMA transfer starts now, PIO starts after irq */ ++ bcm2835_start_dma(host); ++ } ++ ++ if (!host->use_busy) ++ bcm2835_finish_command(host); ++ } ++ ++ mutex_unlock(&host->mutex); ++} ++ ++static void bcm2835_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ++{ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ ++ mutex_lock(&host->mutex); ++ ++ if (!ios->clock || ios->clock != host->clock) { ++ bcm2835_set_clock(host, ios->clock); ++ host->clock = ios->clock; ++ } ++ ++ /* set bus width */ ++ host->hcfg &= ~SDHCFG_WIDE_EXT_BUS; ++ if (ios->bus_width == MMC_BUS_WIDTH_4) ++ host->hcfg |= SDHCFG_WIDE_EXT_BUS; ++ ++ host->hcfg |= SDHCFG_WIDE_INT_BUS; ++ ++ /* Disable clever clock switching, to cope with fast core clocks */ ++ host->hcfg |= SDHCFG_SLOW_CARD; ++ ++ writel(host->hcfg, host->ioaddr + SDHCFG); ++ ++ mutex_unlock(&host->mutex); ++} ++ ++static struct mmc_host_ops bcm2835_ops = { ++ .request = bcm2835_request, ++ .set_ios = bcm2835_set_ios, ++ .hw_reset = bcm2835_reset, ++}; ++ ++static int bcm2835_add_host(struct bcm2835_host *host) ++{ ++ struct mmc_host *mmc = host->mmc; ++ struct device *dev = &host->pdev->dev; ++ char pio_limit_string[20]; ++ int ret; ++ ++ mmc->f_max = host->max_clk; ++ mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV; ++ ++ mmc->max_busy_timeout = ~0 / (mmc->f_max / 1000); ++ ++ dev_dbg(dev, "f_max %d, f_min %d, max_busy_timeout %d\n", ++ mmc->f_max, mmc->f_min, mmc->max_busy_timeout); ++ ++ /* host controller capabilities */ ++ mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | ++ MMC_CAP_NEEDS_POLL | MMC_CAP_HW_RESET | MMC_CAP_ERASE | ++ MMC_CAP_CMD23; ++ ++ spin_lock_init(&host->lock); ++ mutex_init(&host->mutex); ++ ++ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) { ++ dev_warn(dev, "unable to initialise DMA channel. Falling back to PIO\n"); ++ host->use_dma = false; ++ } else { ++ host->use_dma = true; ++ ++ host->dma_cfg_tx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ host->dma_cfg_tx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ host->dma_cfg_tx.slave_id = 13; /* DREQ channel */ ++ host->dma_cfg_tx.direction = DMA_MEM_TO_DEV; ++ host->dma_cfg_tx.src_addr = 0; ++ host->dma_cfg_tx.dst_addr = host->phys_addr + SDDATA; ++ ++ host->dma_cfg_rx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ host->dma_cfg_rx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ host->dma_cfg_rx.slave_id = 13; /* DREQ channel */ ++ host->dma_cfg_rx.direction = DMA_DEV_TO_MEM; ++ host->dma_cfg_rx.src_addr = host->phys_addr + SDDATA; ++ host->dma_cfg_rx.dst_addr = 0; ++ ++ if (dmaengine_slave_config(host->dma_chan_rxtx, ++ &host->dma_cfg_tx) != 0 || ++ dmaengine_slave_config(host->dma_chan_rxtx, ++ &host->dma_cfg_rx) != 0) ++ host->use_dma = false; ++ } ++ ++ mmc->max_segs = 128; ++ mmc->max_req_size = 524288; ++ mmc->max_seg_size = mmc->max_req_size; ++ mmc->max_blk_size = 1024; ++ mmc->max_blk_count = 65535; ++ ++ /* report supported voltage ranges */ ++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; ++ ++ INIT_WORK(&host->dma_work, bcm2835_dma_complete_work); ++ INIT_DELAYED_WORK(&host->timeout_work, bcm2835_timeout); ++ ++ /* Set interrupt enables */ ++ host->hcfg = SDHCFG_BUSY_IRPT_EN; ++ ++ bcm2835_reset_internal(host); ++ ++ ret = request_threaded_irq(host->irq, bcm2835_irq, ++ bcm2835_threaded_irq, ++ 0, mmc_hostname(mmc), host); ++ if (ret) { ++ dev_err(dev, "failed to request IRQ %d: %d\n", host->irq, ret); ++ return ret; ++ } ++ ++ ret = mmc_add_host(mmc); ++ if (ret) { ++ free_irq(host->irq, host); ++ return ret; ++ } ++ ++ pio_limit_string[0] = '\0'; ++ if (host->use_dma && (PIO_THRESHOLD > 0)) ++ sprintf(pio_limit_string, " (>%d)", PIO_THRESHOLD); ++ dev_info(dev, "loaded - DMA %s%s\n", ++ host->use_dma ? "enabled" : "disabled", pio_limit_string); ++ ++ return 0; ++} ++ ++static int bcm2835_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct clk *clk; ++ struct resource *iomem; ++ struct bcm2835_host *host; ++ struct mmc_host *mmc; ++ const __be32 *regaddr_p; ++ int ret; ++ ++ dev_dbg(dev, "%s\n", __func__); ++ mmc = mmc_alloc_host(sizeof(*host), dev); ++ if (!mmc) ++ return -ENOMEM; ++ ++ mmc->ops = &bcm2835_ops; ++ host = mmc_priv(mmc); ++ host->mmc = mmc; ++ host->pdev = pdev; ++ spin_lock_init(&host->lock); ++ ++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ host->ioaddr = devm_ioremap_resource(dev, iomem); ++ if (IS_ERR(host->ioaddr)) { ++ ret = PTR_ERR(host->ioaddr); ++ goto err; ++ } ++ ++ /* Parse OF address directly to get the physical address for ++ * DMA to our registers. ++ */ ++ regaddr_p = of_get_address(pdev->dev.of_node, 0, NULL, NULL); ++ if (!regaddr_p) { ++ dev_err(dev, "Can't get phys address\n"); ++ ret = -EINVAL; ++ goto err; ++ } ++ ++ host->phys_addr = be32_to_cpup(regaddr_p); ++ ++ host->dma_chan = NULL; ++ host->dma_desc = NULL; ++ ++ host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx"); ++ ++ clk = devm_clk_get(dev, NULL); ++ if (IS_ERR(clk)) { ++ ret = PTR_ERR(clk); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "could not get clk: %d\n", ret); ++ goto err; ++ } ++ ++ host->max_clk = clk_get_rate(clk); ++ ++ host->irq = platform_get_irq(pdev, 0); ++ if (host->irq <= 0) { ++ dev_err(dev, "get IRQ failed\n"); ++ ret = -EINVAL; ++ goto err; ++ } ++ ++ ret = mmc_of_parse(mmc); ++ if (ret) ++ goto err; ++ ++ ret = bcm2835_add_host(host); ++ if (ret) ++ goto err; ++ ++ platform_set_drvdata(pdev, host); ++ ++ dev_dbg(dev, "%s -> OK\n", __func__); ++ ++ return 0; ++ ++err: ++ dev_dbg(dev, "%s -> err %d\n", __func__, ret); ++ mmc_free_host(mmc); ++ ++ return ret; ++} ++ ++static int bcm2835_remove(struct platform_device *pdev) ++{ ++ struct bcm2835_host *host = platform_get_drvdata(pdev); ++ ++ mmc_remove_host(host->mmc); ++ ++ writel(SDVDD_POWER_OFF, host->ioaddr + SDVDD); ++ ++ free_irq(host->irq, host); ++ ++ cancel_work_sync(&host->dma_work); ++ cancel_delayed_work_sync(&host->timeout_work); ++ ++ mmc_free_host(host->mmc); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcm2835_match[] = { ++ { .compatible = "brcm,bcm2835-sdhost" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, bcm2835_match); ++ ++static struct platform_driver bcm2835_driver = { ++ .probe = bcm2835_probe, ++ .remove = bcm2835_remove, ++ .driver = { ++ .name = "sdhost-bcm2835", ++ .of_match_table = bcm2835_match, ++ }, ++}; ++module_platform_driver(bcm2835_driver); ++ ++MODULE_ALIAS("platform:sdhost-bcm2835"); ++MODULE_DESCRIPTION("BCM2835 SDHost driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Phil Elwell"); +From patchwork Wed Mar 8 09:19:05 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,3/7] mmc: bcm2835: add sdhost controller to devicetree +From: Gerd Hoffmann +X-Patchwork-Id: 9610693 +Message-Id: <1488964751-22763-6-git-send-email-kraxel@redhat.com> +To: linux-rpi-kernel@lists.infradead.org +Cc: mark.rutland@arm.com, stefan.wahren@i2se.com, ulf.hansson@linaro.org, + f.fainelli@gmail.com, sbranden@broadcom.com, devicetree@vger.kernel.org, + rjui@broadcom.com, lee@kernel.org, will.deacon@arm.com, + linux@armlinux.org.uk, + linux-kernel@vger.kernel.org, eric@anholt.net, robh+dt@kernel.org, + bcm-kernel-feedback-list@broadcom.com, Gerd Hoffmann , + catalin.marinas@arm.com, linux-mmc@vger.kernel.org, + linux-arm-kernel@lists.infradead.org +Date: Wed, 8 Mar 2017 10:19:05 +0100 + +Signed-off-by: Gerd Hoffmann +Acked-by: Eric Anholt +Acked-by: Stefan Wahren +--- + arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 ++++++ + arch/arm/boot/dts/bcm283x.dtsi | 10 ++++++++++ + 2 files changed, 16 insertions(+) + +diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi +index 1e00a28..8b95832 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -69,6 +69,12 @@ + bus-width = <4>; + }; + ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ bus-width = <4>; ++}; ++ + &pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; +diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi +index 9798bc9..19099a5 100644 +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -350,6 +350,16 @@ + arm,primecell-periphid = <0x00241011>; + }; + ++ sdhost: mmc@7e202000 { ++ compatible = "brcm,bcm2835-sdhost"; ++ reg = <0x7e202000 0x100>; ++ interrupts = <2 24>; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ dmas = <&dma 13>; ++ dma-names = "rx-tx"; ++ status = "disabled"; ++ }; ++ + i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; + reg = <0x7e203000 0x20>, +From patchwork Wed Mar 8 09:19:07 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4, 4/7] arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and + multi_v7_defconfig +From: Gerd Hoffmann +X-Patchwork-Id: 9610689 +Message-Id: <1488964751-22763-8-git-send-email-kraxel@redhat.com> +To: linux-rpi-kernel@lists.infradead.org +Cc: mark.rutland@arm.com, stefan.wahren@i2se.com, ulf.hansson@linaro.org, + f.fainelli@gmail.com, sbranden@broadcom.com, devicetree@vger.kernel.org, + rjui@broadcom.com, lee@kernel.org, will.deacon@arm.com, + linux@armlinux.org.uk, + linux-kernel@vger.kernel.org, eric@anholt.net, robh+dt@kernel.org, + bcm-kernel-feedback-list@broadcom.com, Gerd Hoffmann , + catalin.marinas@arm.com, linux-mmc@vger.kernel.org, + linux-arm-kernel@lists.infradead.org +Date: Wed, 8 Mar 2017 10:19:07 +0100 + +We need to enable this controller so that we can switch the SD card's +pinmux over to it by default, which will improve storage performance. + +Read access (dd with 64k blocks on rpi2): + CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s + CONFIG_MMC_BCM2835: 19-20 MB/s + +Differences on write access are pretty much in the noise. + +Signed-off-by: Gerd Hoffmann +--- + arch/arm/configs/bcm2835_defconfig | 1 + + arch/arm/configs/multi_v7_defconfig | 1 + + 2 files changed, 2 insertions(+) + +diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig +index 4b89f4e..3767c24 100644 +--- a/arch/arm/configs/bcm2835_defconfig ++++ b/arch/arm/configs/bcm2835_defconfig +@@ -92,6 +92,7 @@ CONFIG_MMC=y + CONFIG_MMC_SDHCI=y + CONFIG_MMC_SDHCI_PLTFM=y + CONFIG_MMC_SDHCI_IPROC=y ++CONFIG_MMC_BCM2835=y + CONFIG_NEW_LEDS=y + CONFIG_LEDS_CLASS=y + CONFIG_LEDS_GPIO=y +diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig +index a94126f..63b94d0 100644 +--- a/arch/arm/configs/multi_v7_defconfig ++++ b/arch/arm/configs/multi_v7_defconfig +@@ -730,6 +730,7 @@ CONFIG_MMC_DW_EXYNOS=y + CONFIG_MMC_DW_ROCKCHIP=y + CONFIG_MMC_SH_MMCIF=y + CONFIG_MMC_SUNXI=y ++CONFIG_MMC_BCM2835=y + CONFIG_NEW_LEDS=y + CONFIG_LEDS_CLASS=y + CONFIG_LEDS_CLASS_FLASH=m +From patchwork Wed Mar 8 09:19:09 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,5/7] arm64: set CONFIG_MMC_BCM2835=y in defconfig +From: Gerd Hoffmann +X-Patchwork-Id: 9610647 +Message-Id: <1488964751-22763-10-git-send-email-kraxel@redhat.com> +To: linux-rpi-kernel@lists.infradead.org +Cc: mark.rutland@arm.com, stefan.wahren@i2se.com, ulf.hansson@linaro.org, + f.fainelli@gmail.com, sbranden@broadcom.com, devicetree@vger.kernel.org, + rjui@broadcom.com, lee@kernel.org, will.deacon@arm.com, + linux@armlinux.org.uk, + linux-kernel@vger.kernel.org, eric@anholt.net, robh+dt@kernel.org, + bcm-kernel-feedback-list@broadcom.com, Gerd Hoffmann , + catalin.marinas@arm.com, linux-mmc@vger.kernel.org, + linux-arm-kernel@lists.infradead.org +Date: Wed, 8 Mar 2017 10:19:09 +0100 + +We need to enable this controller so that we can switch the SD card's +pinmux over to it by default, which will improve storage performance. + +Read access (dd with 64k blocks on rpi2): + CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s + CONFIG_MMC_BCM2835: 19-20 MB/s + +Differences on write access are pretty much in the noise. + +Signed-off-by: Gerd Hoffmann +--- + arch/arm64/configs/defconfig | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig +index 7c48028..519a55c 100644 +--- a/arch/arm64/configs/defconfig ++++ b/arch/arm64/configs/defconfig +@@ -398,6 +398,7 @@ CONFIG_MMC_DW_EXYNOS=y + CONFIG_MMC_DW_K3=y + CONFIG_MMC_DW_ROCKCHIP=y + CONFIG_MMC_SUNXI=y ++CONFIG_MMC_BCM2835=y + CONFIG_NEW_LEDS=y + CONFIG_LEDS_CLASS=y + CONFIG_LEDS_GPIO=y +From patchwork Wed Mar 8 09:19:10 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,6/7] arm: dts: bcm283x: switch from &sdhci to &sdhost +From: Gerd Hoffmann +X-Patchwork-Id: 9610687 +Message-Id: <1488964751-22763-11-git-send-email-kraxel@redhat.com> +To: linux-rpi-kernel@lists.infradead.org +Cc: mark.rutland@arm.com, stefan.wahren@i2se.com, ulf.hansson@linaro.org, + f.fainelli@gmail.com, sbranden@broadcom.com, devicetree@vger.kernel.org, + rjui@broadcom.com, lee@kernel.org, will.deacon@arm.com, + linux@armlinux.org.uk, + linux-kernel@vger.kernel.org, eric@anholt.net, robh+dt@kernel.org, + bcm-kernel-feedback-list@broadcom.com, Gerd Hoffmann , + catalin.marinas@arm.com, linux-mmc@vger.kernel.org, + linux-arm-kernel@lists.infradead.org +Date: Wed, 8 Mar 2017 10:19:10 +0100 + +sdcard access with the sdhost controller is faster. + +Read access (dd with 64k blocks on rpi2): + CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s + CONFIG_MMC_BCM2835: 19-20 MB/s + +Differences on write access are pretty much in the noise. + +Signed-off-by: Gerd Hoffmann +Acked-by: Eric Anholt +--- + arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi +index 8b95832..e36c392 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -65,13 +65,13 @@ + &sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio48>; +- status = "okay"; + bus-width = <4>; + }; + + &sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; ++ status = "okay"; + bus-width = <4>; + }; + +From patchwork Wed Mar 8 09:19:11 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,7/7] arm64: dts: bcm2837: add &sdhci and &sdhost +From: Gerd Hoffmann +X-Patchwork-Id: 9610637 +Message-Id: <1488964751-22763-12-git-send-email-kraxel@redhat.com> +To: linux-rpi-kernel@lists.infradead.org +Cc: mark.rutland@arm.com, stefan.wahren@i2se.com, ulf.hansson@linaro.org, + f.fainelli@gmail.com, sbranden@broadcom.com, devicetree@vger.kernel.org, + rjui@broadcom.com, lee@kernel.org, will.deacon@arm.com, + linux@armlinux.org.uk, + linux-kernel@vger.kernel.org, eric@anholt.net, robh+dt@kernel.org, + bcm-kernel-feedback-list@broadcom.com, Gerd Hoffmann , + catalin.marinas@arm.com, linux-mmc@vger.kernel.org, + linux-arm-kernel@lists.infradead.org +Date: Wed, 8 Mar 2017 10:19:11 +0100 + +For the raspberry pi 3 we'll need both sdhci (handles sdio wifi) and +sdhost (handles sdcard). + +Signed-off-by: Gerd Hoffmann +Acked-by: Eric Anholt +--- + arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts +index c309633..972f14d 100644 +--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts +@@ -22,3 +22,20 @@ + &uart1 { + status = "okay"; + }; ++ ++/* SDHCI is used to control the SDIO for wireless */ ++&sdhci { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emmc_gpio34>; ++ status = "okay"; ++ bus-width = <4>; ++ non-removable; ++}; ++ ++/* SDHOST is used to drive the SD card */ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ status = "okay"; ++ bus-width = <4>; ++}; diff --git a/kernel-aarch64-debug.config b/kernel-aarch64-debug.config index f81f16b..4747bcd 100644 --- a/kernel-aarch64-debug.config +++ b/kernel-aarch64-debug.config @@ -3004,6 +3004,7 @@ CONFIG_MMA7660=m # CONFIG_MMA9553 is not set # CONFIG_MMC35240 is not set CONFIG_MMC_ARMMMCI=m +CONFIG_MMC_BCM2835=m CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 @@ -3186,7 +3187,7 @@ CONFIG_MVEBU_MBUS=y CONFIG_MVMDIO=m CONFIG_MVNETA_BM_ENABLE=m CONFIG_MVNETA=m -# CONFIG_MVPP2 is not set +CONFIG_MVPP2=m # CONFIG_MV_XOR_V2 is not set CONFIG_MV_XOR=y CONFIG_MWAVE=m @@ -4081,6 +4082,7 @@ CONFIG_QCOM_HIDMA_MGMT=m CONFIG_QCOM_IRQ_COMBINER=y CONFIG_QCOM_L2_PMU=y # CONFIG_QCOM_Q6V5_PIL is not set +CONFIG_QCOM_QDF2400_ERRATUM_0065=y CONFIG_QCOM_QFPROM=m CONFIG_QCOM_SMD=m CONFIG_QCOM_SMD_RPM=m diff --git a/kernel-aarch64.config b/kernel-aarch64.config index 8ca1206..7becd1a 100644 --- a/kernel-aarch64.config +++ b/kernel-aarch64.config @@ -2984,6 +2984,7 @@ CONFIG_MMA7660=m # CONFIG_MMA9553 is not set # CONFIG_MMC35240 is not set CONFIG_MMC_ARMMMCI=m +CONFIG_MMC_BCM2835=m CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 @@ -3165,7 +3166,7 @@ CONFIG_MVEBU_MBUS=y CONFIG_MVMDIO=m CONFIG_MVNETA_BM_ENABLE=m CONFIG_MVNETA=m -# CONFIG_MVPP2 is not set +CONFIG_MVPP2=m # CONFIG_MV_XOR_V2 is not set CONFIG_MV_XOR=y CONFIG_MWAVE=m @@ -4059,6 +4060,7 @@ CONFIG_QCOM_HIDMA_MGMT=m CONFIG_QCOM_IRQ_COMBINER=y CONFIG_QCOM_L2_PMU=y # CONFIG_QCOM_Q6V5_PIL is not set +CONFIG_QCOM_QDF2400_ERRATUM_0065=y CONFIG_QCOM_QFPROM=m CONFIG_QCOM_SMD=m CONFIG_QCOM_SMD_RPM=m diff --git a/kernel-armv7hl-debug.config b/kernel-armv7hl-debug.config index 64cf73b..2ef6d5a 100644 --- a/kernel-armv7hl-debug.config +++ b/kernel-armv7hl-debug.config @@ -3227,6 +3227,7 @@ CONFIG_MMA7660=m # CONFIG_MMA9553 is not set # CONFIG_MMC35240 is not set CONFIG_MMC_ARMMMCI=m +CONFIG_MMC_BCM2835=m CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 diff --git a/kernel-armv7hl-lpae-debug.config b/kernel-armv7hl-lpae-debug.config index 23a7ce6..669d9ce 100644 --- a/kernel-armv7hl-lpae-debug.config +++ b/kernel-armv7hl-lpae-debug.config @@ -3092,6 +3092,7 @@ CONFIG_MMA7660=m # CONFIG_MMA9553 is not set # CONFIG_MMC35240 is not set CONFIG_MMC_ARMMMCI=m +CONFIG_MMC_BCM2835=m CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 diff --git a/kernel-armv7hl-lpae.config b/kernel-armv7hl-lpae.config index fb64e5f..bc8fed4 100644 --- a/kernel-armv7hl-lpae.config +++ b/kernel-armv7hl-lpae.config @@ -3072,6 +3072,7 @@ CONFIG_MMA7660=m # CONFIG_MMA9553 is not set # CONFIG_MMC35240 is not set CONFIG_MMC_ARMMMCI=m +CONFIG_MMC_BCM2835=m CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 diff --git a/kernel-armv7hl.config b/kernel-armv7hl.config index 7a82bfe..6550ab4 100644 --- a/kernel-armv7hl.config +++ b/kernel-armv7hl.config @@ -3207,6 +3207,7 @@ CONFIG_MMA7660=m # CONFIG_MMA9553 is not set # CONFIG_MMC35240 is not set CONFIG_MMC_ARMMMCI=m +CONFIG_MMC_BCM2835=m CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 diff --git a/kernel-i686-PAE.config b/kernel-i686-PAE.config index cba70f8..5368ca7 100644 --- a/kernel-i686-PAE.config +++ b/kernel-i686-PAE.config @@ -3077,7 +3077,6 @@ CONFIG_MTRR_SANITIZER=y CONFIG_MTRR=y # CONFIG_MVIAC3_2 is not set CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-i686-PAEdebug.config b/kernel-i686-PAEdebug.config index 1bb5ebb..8ebe7ac 100644 --- a/kernel-i686-PAEdebug.config +++ b/kernel-i686-PAEdebug.config @@ -3097,7 +3097,6 @@ CONFIG_MTRR_SANITIZER=y CONFIG_MTRR=y # CONFIG_MVIAC3_2 is not set CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-i686-debug.config b/kernel-i686-debug.config index 952b46f..fcc8429 100644 --- a/kernel-i686-debug.config +++ b/kernel-i686-debug.config @@ -3097,7 +3097,6 @@ CONFIG_MTRR_SANITIZER=y CONFIG_MTRR=y # CONFIG_MVIAC3_2 is not set CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-i686.config b/kernel-i686.config index 2fa6829..3a16f75 100644 --- a/kernel-i686.config +++ b/kernel-i686.config @@ -3077,7 +3077,6 @@ CONFIG_MTRR_SANITIZER=y CONFIG_MTRR=y # CONFIG_MVIAC3_2 is not set CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-ppc64-debug.config b/kernel-ppc64-debug.config index cc73319..32694d4 100644 --- a/kernel-ppc64-debug.config +++ b/kernel-ppc64-debug.config @@ -2951,7 +2951,6 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-ppc64.config b/kernel-ppc64.config index 1d7d6b2..672225c 100644 --- a/kernel-ppc64.config +++ b/kernel-ppc64.config @@ -2929,7 +2929,6 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-ppc64le-debug.config b/kernel-ppc64le-debug.config index d19d366..9641329 100644 --- a/kernel-ppc64le-debug.config +++ b/kernel-ppc64le-debug.config @@ -2896,7 +2896,6 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-ppc64le.config b/kernel-ppc64le.config index 987d2e1..1d4ca88 100644 --- a/kernel-ppc64le.config +++ b/kernel-ppc64le.config @@ -2874,7 +2874,6 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-ppc64p7-debug.config b/kernel-ppc64p7-debug.config index f62c03e..7f2596c 100644 --- a/kernel-ppc64p7-debug.config +++ b/kernel-ppc64p7-debug.config @@ -2895,7 +2895,6 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-ppc64p7.config b/kernel-ppc64p7.config index d34c468..cf065cb 100644 --- a/kernel-ppc64p7.config +++ b/kernel-ppc64p7.config @@ -2873,7 +2873,6 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-s390x-debug.config b/kernel-s390x-debug.config index 6f7436a..28df469 100644 --- a/kernel-s390x-debug.config +++ b/kernel-s390x-debug.config @@ -2828,7 +2828,6 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-s390x.config b/kernel-s390x.config index 8882f74..d234f2a 100644 --- a/kernel-s390x.config +++ b/kernel-s390x.config @@ -2806,7 +2806,6 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-x86_64-debug.config b/kernel-x86_64-debug.config index ca38138..dba8cf6 100644 --- a/kernel-x86_64-debug.config +++ b/kernel-x86_64-debug.config @@ -3121,7 +3121,6 @@ CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_MTRR_SANITIZER=y CONFIG_MTRR=y CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel-x86_64.config b/kernel-x86_64.config index 123b710..5fd7607 100644 --- a/kernel-x86_64.config +++ b/kernel-x86_64.config @@ -3101,7 +3101,6 @@ CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_MTRR_SANITIZER=y CONFIG_MTRR=y CONFIG_MVMDIO=m -# CONFIG_MVPP2 is not set CONFIG_MWAVE=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m diff --git a/kernel.spec b/kernel.spec index 25a32f0..7aa465f 100644 --- a/kernel.spec +++ b/kernel.spec @@ -530,6 +530,9 @@ Patch430: bcm2837-initial-support.patch # http://www.spinics.net/lists/dri-devel/msg132235.html Patch433: drm-vc4-Fix-OOPSes-from-trying-to-cache-a-partially-constructed-BO..patch +# bcm283x mmc for wifi http://www.spinics.net/lists/arm-kernel/msg567077.html +Patch434: bcm283x-mmc-bcm2835.patch + # Upstream fixes for i2c/serial/ethernet MAC addresses Patch435: bcm283x-fixes.patch @@ -2166,6 +2169,8 @@ fi * Sun Mar 12 2017 Peter Robinson - Update kernel source location now ftp is retired - Enable STi h407 SoC +- Minor ARM config cleanups +- bcm283x mmc driver improvements * Fri Mar 10 2017 Laura Abbott - 4.11.0-0.rc1.git3.1 - Linux v4.11-rc1-136-gc1aa905