commit 8ed5b5d41168a98cffa63e2f6c51c3243e159706 Author: Mauro Carvalho Chehab Date: Wed Mar 13 22:56:33 2013 -0300 i7300_edac: Fix memory detection in single mode When the machine is on single mode, only branch 0 channel 0 is valid. However, the code is not honouring it: [ 1952.639341] EDAC DEBUG: i7300_get_mc_regs: Memory controller operating on single mode ... [ 1952.639351] EDAC DEBUG: i7300_init_csrows: AMB-present CH0 = 0x1: [ 1952.639353] EDAC DEBUG: i7300_init_csrows: AMB-present CH1 = 0x0: [ 1952.639355] EDAC DEBUG: i7300_init_csrows: AMB-present CH2 = 0x0: [ 1952.639358] EDAC DEBUG: i7300_init_csrows: AMB-present CH3 = 0x0: ... [ 1952.639360] EDAC DEBUG: decode_mtr: MTR0 CH0: DIMMs are Present (mtr) [ 1952.639362] EDAC DEBUG: decode_mtr: WIDTH: x8 [ 1952.639363] EDAC DEBUG: decode_mtr: ELECTRICAL THROTTLING is enabled [ 1952.639364] EDAC DEBUG: decode_mtr: NUMBANK: 4 bank(s) [ 1952.639366] EDAC DEBUG: decode_mtr: NUMRANK: single [ 1952.639367] EDAC DEBUG: decode_mtr: NUMROW: 16,384 - 14 rows [ 1952.639368] EDAC DEBUG: decode_mtr: NUMCOL: 1,024 - 10 columns [ 1952.639370] EDAC DEBUG: decode_mtr: SIZE: 512 MB [ 1952.639371] EDAC DEBUG: decode_mtr: ECC code is 8-byte-over-32-byte SECDED+ code [ 1952.639373] EDAC DEBUG: decode_mtr: Scrub algorithm for x8 is on enhanced mode [ 1952.639374] EDAC DEBUG: decode_mtr: MTR0 CH1: DIMMs are Present (mtr) [ 1952.639376] EDAC DEBUG: decode_mtr: WIDTH: x8 [ 1952.639377] EDAC DEBUG: decode_mtr: ELECTRICAL THROTTLING is enabled [ 1952.639379] EDAC DEBUG: decode_mtr: NUMBANK: 4 bank(s) [ 1952.639380] EDAC DEBUG: decode_mtr: NUMRANK: single [ 1952.639381] EDAC DEBUG: decode_mtr: NUMROW: 16,384 - 14 rows [ 1952.639383] EDAC DEBUG: decode_mtr: NUMCOL: 1,024 - 10 columns [ 1952.639384] EDAC DEBUG: decode_mtr: SIZE: 512 MB [ 1952.639385] EDAC DEBUG: decode_mtr: ECC code is 8-byte-over-32-byte SECDED+ code [ 1952.639387] EDAC DEBUG: decode_mtr: Scrub algorithm for x8 is on enhanced mode ... [ 1952.639449] EDAC DEBUG: print_dimm_size: channel 0 | channel 1 | channel 2 | channel 3 | [ 1952.639451] EDAC DEBUG: print_dimm_size: ------------------------------------------------------------- [ 1952.639453] EDAC DEBUG: print_dimm_size: csrow/SLOT 0 512 MB | 512 MB | 0 MB | 0 MB | [ 1952.639456] EDAC DEBUG: print_dimm_size: csrow/SLOT 1 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639458] EDAC DEBUG: print_dimm_size: csrow/SLOT 2 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639460] EDAC DEBUG: print_dimm_size: csrow/SLOT 3 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639462] EDAC DEBUG: print_dimm_size: csrow/SLOT 4 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639464] EDAC DEBUG: print_dimm_size: csrow/SLOT 5 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639466] EDAC DEBUG: print_dimm_size: csrow/SLOT 6 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639468] EDAC DEBUG: print_dimm_size: csrow/SLOT 7 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639470] EDAC DEBUG: print_dimm_size: ------------------------------------------------------------- Instead of detecting a single memory at channel 0, it is showing twice the memory. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c index 087c27b..9004c64 100644 --- a/drivers/edac/i7300_edac.c +++ b/drivers/edac/i7300_edac.c @@ -750,15 +750,23 @@ static int i7300_init_csrows(struct mem_ctl_info *mci) struct i7300_dimm_info *dinfo; int rc = -ENODEV; int mtr; - int ch, branch, slot, channel; + int ch, branch, slot, channel, max_channel, max_branch; struct dimm_info *dimm; pvt = mci->pvt_info; edac_dbg(2, "Memory Technology Registers:\n"); + if (IS_SINGLE_MODE(pvt->mc_settings_a)) { + max_branch = 1; + max_channel = 1; + } else { + max_branch = MAX_BRANCHES; + max_channel = MAX_CH_PER_BRANCH; + } + /* Get the AMB present registers for the four channels */ - for (branch = 0; branch < MAX_BRANCHES; branch++) { + for (branch = 0; branch < max_branch; branch++) { /* Read and dump branch 0's MTRs */ channel = to_channel(0, branch); pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch], @@ -767,6 +775,9 @@ static int i7300_init_csrows(struct mem_ctl_info *mci) edac_dbg(2, "\t\tAMB-present CH%d = 0x%x:\n", channel, pvt->ambpresent[channel]); + if (max_channel == 1) + continue; + channel = to_channel(1, branch); pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch], AMBPRESENT_1, @@ -778,11 +789,11 @@ static int i7300_init_csrows(struct mem_ctl_info *mci) /* Get the set of MTR[0-7] regs by each branch */ for (slot = 0; slot < MAX_SLOTS; slot++) { int where = mtr_regs[slot]; - for (branch = 0; branch < MAX_BRANCHES; branch++) { + for (branch = 0; branch < max_branch; branch++) { pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch], where, &pvt->mtr[slot][branch]); - for (ch = 0; ch < MAX_CH_PER_BRANCH; ch++) { + for (ch = 0; ch < max_channel; ch++) { int channel = to_channel(ch, branch); dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,