diff -dur latexmk-3.20.ORIG/latexmk.1 latexmk-3.20/latexmk.1
--- latexmk-3.20.ORIG/latexmk.1 2007-07-03 14:22:44.000000000 -0600
+++ latexmk-3.20/latexmk.1 2007-08-31 21:44:15.000000000 -0600
@@ -1,9 +1,9 @@
-.TH LATEXMK 1L "3 July 2007" ""
-.SH NAME
+.TH "LATEXMK" "1L" "3 July 2007" "" ""
+.SH "NAME"
latexmk \- generate LaTeX document
-.SH SYNOPSIS
+.SH "SYNOPSIS"
.B latexmk [options] [file ...]
-.SH DESCRIPTION
+.SH "DESCRIPTION"
.I LatexMk
completely automates the process of compiling a LaTeX document.
Essentially, it is like a specialized relative of the general
@@ -15,8 +15,8 @@
document. It can also be set to run continuously with a suitable
previewer; in that case the LaTeX program, etc, are rerun whenever one
of the source files is modified, and the previewer updates the
-on-screen view of the compiled document.
-.PP
+on\-screen view of the compiled document.
+.PP
\fILatexmk\fR determines which are the source files by examining the
log file. When \fIlatexmk\fR is run, it examines properties of the
source files, and if any have been changed since the last document
@@ -30,14 +30,14 @@
For example, from an updated figure file it can automatically generate
a file in encapsulated postscript or another suitable format for
reading by LaTeX.
-.PP
+.PP
\fILatexmk\fR has two different previewing options. In the simple
-\fB-pv\fR option, a dvi, postscript or pdf previewer is automatically
+\fB\-pv\fR option, a dvi, postscript or pdf previewer is automatically
run after generating the dvi, postscript or pdf version of the
document. The type of file to view is selected according to
configuration settings and command line options.
-.PP
-The second previewing option is the powerful \fB-pvc\fR option
+.PP
+The second previewing option is the powerful \fB\-pvc\fR option
(mnemonic: "preview continuously"). In this case, \fIlatexmk\fR runs
continuously, regularly monitoring all the source files to see if any
have changed. Every time a change is detected, \fIlatexmk\fR runs all
@@ -47,31 +47,31 @@
are written to disk, \fIlatexmk\fR completely automates the cycle of
updating the .dvi (and possibly the .ps and .pdf) file, and refreshing
the previewer's display. It's not quite WYSIWYG, but usefully close.
-.PP
+.PP
For other previewers, the user may have to manually make the previewer
update its display, which can be (some versions of xdvi and gsview) as
simple as forcing a redraw of its display.
-.PP
+.PP
\fILatexmk\fR has the ability to print a banner in gray diagonally
across each page when making the postscript file. It can also, if
needed, call an external program to do other postprocessing on the
generated files.
-.PP
+.PP
\fILatexmk\fR is highly configurable, both from the command line and
in configuration files, so that it can accommodate a wide variety of
user needs and system configurations. Default values are set
according to the operating system, so \fIlatexmk\fR often works
-without special configuration on MS-Windows, cygwin, Linux, OS-X, and
+without special configuration on MS\-Windows, cygwin, Linux, OS\-X, and
other UNIX systems (notably Solaris).
-.PP
+.PP
A very annoying complication handled very reliably by \fILatexmk\fR,
is that LaTeX is a multiple pass system. On each run, LaTeX reads in
information generated on a previous run, for things like cross
referencing and indexing. In the simplest cases, a second run of
LaTeX suffices, and often the log file contains a message about the
-need for another pass. However, there is a wide variety of add-on
+need for another pass. However, there is a wide variety of add\-on
macro packages to LaTeX, with a variety of behaviors. The result is
-to break simple-minded determinations of how many runs are needed and
+to break simple\-minded determinations of how many runs are needed and
of which programs. In its new version, \fIlatexmk\fR has a highly
general and efficient solution to these issues. The solution involves
retaining between runs information on the source files, and a symptom
@@ -79,10 +79,10 @@
\fR.fdb_latexmk\fR, by default) that contains the source file
information.
-.SH LATEXMK OPTIONS AND ARGUMENTS
-(All options can be introduced by single or double "-" characters,
-e.g., "latexmk -help" or "latexmk --help".)
-.TP
+.SH "LATEXMK OPTIONS AND ARGUMENTS"
+(All options can be introduced by single or double "\-" characters,
+e.g., "latexmk \-help" or "latexmk \-\-help".)
+.TP
.B file
One or more files can be specified. If no files are specified,
\fIlatexmk\fR will, by default, run on all files in the current working directory
@@ -95,79 +95,79 @@
latexmk foo
then \fIlatexmk\fR will operate on the file "foo.tex".
-.TP
-.B -bm <message>
+.TP
+.B \-bm <message>
A banner message to print diagonally across each page when converting
the dvi file to postscript. The message must be a single argument on
the command line so be careful with quoting spaces and such.
-Note that if the \fB-bm\fR option is specified, the \fB-ps\fR option is
+Note that if the \fB\-bm\fR option is specified, the \fB\-ps\fR option is
assumed.
-.TP
-.B -bi <intensity>
+.TP
+.B \-bi <intensity>
How dark to print the banner message. A decimal number between 0 and 1.
0 is black and 1 is white. The default is 0.95, which is OK unless your
toner cartridge is getting low.
-.TP
-.B -bs <scale>
+.TP
+.B \-bs <scale>
A decimal number that specifies how large the banner message will be
printed. Experimentation is necessary to get the right scale for your
message, as a rule of thumb the scale should be about equal to 1100
divided by the number of characters in the message. The default is 220.0
which is just right for 5 character messages.
.TP
-.B -commands
+.B \-commands
List the commands used by \fIlatexmk\fR for processing files, and then
exit.
.TP
-.B -c
+.B \-c
Clean up (remove) all regenerateable files generated by \fIlatex\fR
and \fIbibtex\fR except dvi, postscript and pdf. In addition, files
specified by the $clean_ext configuration variable are removed. But
the file containing a database of source file information is not
removed.
-This cleanup is instead of a regular make. See the \fB-gg\fR option
+This cleanup is instead of a regular make. See the \fB\-gg\fR option
if you want to do a cleanup then a make.
.TP
-.B -C
+.B \-C
Clean up (remove) all regenerateable files generated by \fIlatex\fR
and \fIbibtex\fR including aux, dep, dvi, postscript and pdf. In
addition, those specified by the $clean_ext and $clean_full_ext
configuration variables are removed. But the file containing a
database of source file information is not removed.
-This cleanup is instead of a regular make. See the \fB-gg\fR option
+This cleanup is instead of a regular make. See the \fB\-gg\fR option
if you want to do a cleanup than a make.
.TP
-.B -CA
+.B \-CA
Clean up (remove) absolutely all regenerateable files generated by
\fIlatex\fR and \fIbibtex\fR including aux, dep, dvi, postscript and
pdf. In addition, those specified by the $clean_ext, $clean_full_ext,
and @generated_exts configuration variables are removed, and the file
containing a database of source file information.
-This cleanup is instead of a regular make. It is the same as \fB-C
--CF\fR. See the \fB-gg\fR option if you want to do a cleanup then a
+This cleanup is instead of a regular make. It is the same as \fB\-C
+\-CF\fR. See the \fB\-gg\fR option if you want to do a cleanup then a
make.
.TP
-.B -CF
+.B \-CF
Remove the file containing a database of source file information,
before doing the other actions requested.
.TP
-.B -d
+.B \-d
Set draft mode. This prints the banner message "DRAFT" across your
page when converting the dvi file to postscript. Size and intensity
-can be modified with the \fB-bs\fR and \fB-bi\fR options. The \fB-bm\fR
+can be modified with the \fB\-bs\fR and \fB\-bi\fR options. The \fB\-bm\fR
option will override this option as this is really just a short way of
specifying:
- latexmk -bm DRAFT
+ latexmk \-bm DRAFT
-Note that if the \fB-d\fR option is specified, the \fB-ps\fR option is
+Note that if the \fB\-d\fR option is specified, the \fB\-ps\fR option is
assumed.
-.TP
-.B -dF
+.TP
+.B \-dF
Dvi file filtering. The argument to this option is a filter which will
generate a filtered dvi file with the extension ".dviF". All extra
processing (e.g. conversion to postscript, preview, printing) will then
@@ -175,117 +175,117 @@
Example usage: To use dviselect to select only the even pages of the dvi file:
- latexmk -dF 'dviselect even' foo.tex
-.TP
-.B -diagnostics
+ latexmk \-dF 'dviselect even' foo.tex
+.TP
+.B \-diagnostics
Print detailed diagnostics during a run. This may help for debugging
problems or to understand \fI.latexmk\fR's behavior in difficult
situations.
-.TP
-.B -dvi
+.TP
+.B \-dvi
Generate dvi version of document.
-.TP
-.B -dvi-
+.TP
+.B \-dvi\-
Turn off generation of dvi version of document. (This may get
overridden, if some other file is made (a .ps file) that is generated from
the dvi file, or if no generated file at all is requested.)
-.TP
-.B -f
+.TP
+.B \-f
Force \fIlatexmk\fR to continue document processing despite errors.
Normally, when \fIlatexmk\fR detects that LaTeX or another program has
found an error which will not be resolved by further processing, no
further processing is carried out.
-.TP
-.B -f-
-Turn off the forced processing-past-errors such as is set by the
-\fB-f\fR option. This could be used to override a setting in a
+.TP
+.B \-f\-
+Turn off the forced processing\-past\-errors such as is set by the
+\fB\-f\fR option. This could be used to override a setting in a
configuration file.
-.TP
-.B -g
+.TP
+.B \-g
Force \fIlatexmk\fR to process document fully, even under situations
where \fIlatexmk\fR would normally decide that no changes in the
source files have occured since the previous run.
This option is useful, for example, if you change some options and
wish to reprocess the files.
-.TP
-.B -g-
-Turn off \fB-g\fR.
-.TP
-.B -gg
+.TP
+.B \-g\-
+Turn off \fB\-g\fR.
+.TP
+.B \-gg
"Super go mode" or "clean make": clean out generated files as if
-\fB-CA\fR had been given, and then do a regular make.
-.TP
-.B -h, -help
+\fB\-CA\fR had been given, and then do a regular make.
+.TP
+.B \-h, \-help
Print help information.
-.TP
-.B -l
+.TP
+.B \-l
Run in landscape mode, using the landscape mode for the previewers and
the dvi to postscript converters. This option is not normally needed
nowadays, since current previewers normally determine this information
automatically.
-.TP
-.B -l-
-Turn off \fB-l\fR.
-.TP
-.B -new-viewer
-When in continuous-preview mode, always start a new viewer to view the
-generated file. By default, \fIlatexmk\fR will, in continuous-preview
+.TP
+.B \-l\-
+Turn off \fB\-l\fR.
+.TP
+.B \-new\-viewer
+When in continuous\-preview mode, always start a new viewer to view the
+generated file. By default, \fIlatexmk\fR will, in continuous\-preview
mode, test for a previously running previewer for the same file and
not start a new one if a previous previewer is running. However, its
-test sometimes fails (notably if there is an already-running previewer
+test sometimes fails (notably if there is an already\-running previewer
that is viewing a file of the same name as the current file, but in a
different directory). This option turns off this default behavior.
-.TP
-.B -new-viewer-
-The inverse of the \fB-new-viewer\fR option. It puts \fIlatexmk\fR
-in its normal behavior that in preview-continuous mode it checks for
-an already-running previewer.
-.TP
-.B -p
+.TP
+.B \-new\-viewer\-
+The inverse of the \fB\-new\-viewer\fR option. It puts \fIlatexmk\fR
+in its normal behavior that in preview\-continuous mode it checks for
+an already\-running previewer.
+.TP
+.B \-p
Print out the document. By default on a UNIX or Linux system, this is
done using lpr after generating the postscript file. But you can use
-the \fB-print=...\fR option to print the dvi or pdf files instead, and
+the \fB\-print=...\fR option to print the dvi or pdf files instead, and
you can configure this in a start up file (by setting the
\fI$print_type\fR variable).
However, the correct behavior for printing very much depends on your
-system's software. In particular, under MS-Windows you must have
+system's software. In particular, under MS\-Windows you must have
suitable program(s) available, and you must have configured the print
-commands used by \fIlatexmk\fR. This can be non-trivial.
+commands used by \fIlatexmk\fR. This can be non\-trivial.
-This option is incompatible with the \fB-pv\fR and \fB-pvc\fR options,
+This option is incompatible with the \fB\-pv\fR and \fB\-pvc\fR options,
so it turns them off.
-.TP
-.B -pdf
+.TP
+.B \-pdf
Generate pdf version of document using pdflatex.
-.TP
-.B -pdfdvi
+.TP
+.B \-pdfdvi
Generate pdf version of document from the dvi file, by default using dvipdf.
-.TP
-.B -pdfps
+.TP
+.B \-pdfps
Generate pdf version of document from the ps file, by default using
ps2pdf.
-.TP
-.B -pdf-
+.TP
+.B \-pdf\-
Turn off generation of pdf version of document.
(This can be used to override a setting in a configuration file.
It may get overridden if some other option requires the generation of
a pdf file.)
-.TP
-.B -print=dvi, -print=ps, -print=pdf
+.TP
+.B \-print=dvi, \-print=ps, \-print=pdf
Define which kind of file is printed. This option also ensures that
the requisite file is made, and turns on printing.
-.TP
-.B -ps
+.TP
+.B \-ps
Generate postscript version of document.
-.TP
-.B -ps-
+.TP
+.B \-ps\-
Turn off generation of postscript version of document.
This can be used to override a setting in a configuration file.
(It may get overridden by some other option that requires a postscript
file, for example a request for printing.)
-.TP
-.B -pF
+.TP
+.B \-pF
Postscript file filtering. The argument to this option is a filter
which will generate a filtered postscript file with the extension
".psF". All extra processing (e.g. preview, printing) will then be
@@ -293,54 +293,54 @@
Example usage: Use psnup to print two pages on the one page:
- latexmk -ps -pF 'psnup -2' foo.tex
+ latexmk \-ps \-pF 'psnup \-2' foo.tex
or
- latexmk -ps -pF "psnup -2" foo.tex
+ latexmk \-ps \-pF "psnup \-2" foo.tex
-Whether to use single or double quotes round the "psnup -2" will depend on
+Whether to use single or double quotes round the "psnup \-2" will depend on
your command interpreter, in particular on the operating system.
-.TP
-.B -pv
-Run file previewer. If the \fB-view\fR option is used, this will select
+.TP
+.B \-pv
+Run file previewer. If the \fB\-view\fR option is used, this will select
the kind of file to be previewed (dvi, ps or pdf).
Otherwise the viewer views the "highest" kind of file selected, by the
-\fB-dvi\fR, \fB-ps\fR, \fB-pdf\fR, \fB-pdfps\fR options, in the
+\fB\-dvi\fR, \fB\-ps\fR, \fB\-pdf\fR, \fB\-pdfps\fR options, in the
order dvi, ps, pdf (low to high).
If no file type has been selected, the dvi previewer will be used.
-This option is incompatible with the \fB-p\fR and \fB-pvc\fR options,
+This option is incompatible with the \fB\-p\fR and \fB\-pvc\fR options,
so it turns them off.
-.TP
-.B -pv-
-Turn off \fB-pv\fR.
-.TP
-.B -pvc
+.TP
+.B \-pv\-
+Turn off \fB\-pv\fR.
+.TP
+.B \-pvc
Run a file previewer and continually update the .dvi, .ps, and/or .pdf
files whenever changes are made to source files (see the Description
above). Which of these files is generated and which is viewed is
-governed by the other options, and is the same as for the \fB-pv\fR
+governed by the other options, and is the same as for the \fB\-pv\fR
option.
-This option also turns on the \fB-f\fR option, since it is normally
-desirable in preview-continuous-mode to continue working even if
+This option also turns on the \fB\-f\fR option, since it is normally
+desirable in preview\-continuous\-mode to continue working even if
errors are found.
-The preview-continuous option \fB-pvc\fR can only work with one file.
+The preview\-continuous option \fB\-pvc\fR can only work with one file.
So in this case you will normally only specify one filename on
the command line. It is also incompatible with the
-\fB-p\fR and \fB-pv\fR options, so it turns these options off
+\fB\-p\fR and \fB\-pv\fR options, so it turns these options off
With a good previewer the display will be automatically updated.
-(Under \fIsome but not all\fR versions of UNIX/Linux "gv -watch" does
+(Under \fIsome but not all\fR versions of UNIX/Linux "gv \-watch" does
this for postscript files; this can be set by a configuration
variable. This would also work for pdf files except for an apparent
bug in gv that causes an error when the newly updated pdf file is
read.) Many other previewers will need a manual update.
-Important note: the acroread program on MS-Windows locks the pdf file,
+Important note: the acroread program on MS\-Windows locks the pdf file,
and prevents new versions being written, so it is a bad idea to use
-acroread to view pdf files in preview-continuous mode. It is better
-to use a dvi or ps viewer, as set by one of the \fB-view=dvi\fR and
-\fB-view=ps\fR options.
+acroread to view pdf files in preview\-continuous mode. It is better
+to use a dvi or ps viewer, as set by one of the \fB\-view=dvi\fR and
+\fB\-view=ps\fR options.
There are some other methods for arranging an update, notably useful
for many versions of xdvi and xpdf. These are best set in
@@ -348,65 +348,65 @@
Note that if \fIlatexmk\fR dies or is stopped by the user, the
"forked" previewer will continue to run. Successive invocations with
-the \fB-pvc\fR option will not fork new previewers, but \fIlatexmk\fR
+the \fB\-pvc\fR option will not fork new previewers, but \fIlatexmk\fR
will normally use the existing previewer. (At least this will happen
when \fIlatexmk\fR is running under an operating system where it knows
how to determine whether an existing previewer is running.)
-.TP
-.B -pvc-
-Turn off \fB-pvc\fR.
-.TP
-.B -quiet
-Same as -silent
-.TP
-.B -r <rcfile>
+.TP
+.B \-pvc\-
+Turn off \fB\-pvc\fR.
+.TP
+.B \-quiet
+Same as \-silent
+.TP
+.B \-r <rcfile>
Read the specified initialization file ("RC file") before processing.
-Be careful about the ordering: (1) Standard initialization files --
-see the section below on "Initialization (RC) files" -- are read
+Be careful about the ordering: (1) Standard initialization files \-\-
+see the section below on "Initialization (RC) files" \-\- are read
first. (2) Then the options on the command line are acted on in the
order they are given. Therefore if an initialization file is
-specified by the \fB-r\fR option, it is read during this second step.
-Thus an initialization file specified with the \fB-r\fR option can
+specified by the \fB\-r\fR option, it is read during this second step.
+Thus an initialization file specified with the \fB\-r\fR option can
override both the standard initialization files and \fIpreviously\fR
specified options. But all of these can be overridden by \fIlater\fR
options. See below for more details about initialization (RC) files.
-.TP
-.B -silent
+.TP
+.B \-silent
Run commands silently, i.e., with options that reduce the amount of
diagnostics generated. For example, with the default settings for
-commands under UNIX, the command "latex -interaction=batchmode" is used
+commands under UNIX, the command "latex \-interaction=batchmode" is used
for latex.
Also reduce the number of informational messages that \fIlatexmk\fR
generates.
-.TP
-.B -v, -version
+.TP
+.B \-v, \-version
Print version number of \fIlatexmk\fR.
-.TP
-.B -verbose
-Opposite of \fB-silent\fR. This is the default setting.
-.TP
-.B -view=default, -view=dvi, -view=ps, -view=pdf
+.TP
+.B \-verbose
+Opposite of \fB\-silent\fR. This is the default setting.
+.TP
+.B \-view=default, \-view=dvi, \-view=ps, \-view=pdf
Set the kind of file used when previewing is requested (e.g., by the
-\fB-pv\fR or \fB-pvc\fR switches). The default is to view the "highest"
+\fB\-pv\fR or \fB\-pvc\fR switches). The default is to view the "highest"
kind of requested file (in the order dvi, ps, pdf).
-.PP
-The preview-continuous option \fB-pvc\fR can only work with one file.
+.PP
+The preview\-continuous option \fB\-pvc\fR can only work with one file.
So in this case you will normally only specify one filename on
the command line.
-.PP
-Options \fB-p\fR, \fB-pv\fR and \fB-pvc\fR are mutually exclusive. So
+.PP
+Options \fB\-p\fR, \fB\-pv\fR and \fB\-pvc\fR are mutually exclusive. So
each of these options turns the others off.
-.SH EXAMPLES
-.nf
+.SH "EXAMPLES"
+.nf
.ta 2i
% \fBlatexmk thesis\fR \fI# run latex enough times to resolve
- cross-references\fR
+ cross\-references\fR
-% \fBlatexmk -pvc -ps thesis\fR \fI# run latex enough times to resolve
- cross-references, make a postscript
+% \fBlatexmk \-pvc \-ps thesis\fR \fI# run latex enough times to resolve
+ cross\-references, make a postscript
file, start a previewer. Then
watch for changes in the source
file thesis.tex and any files it
@@ -416,55 +416,56 @@
encounters an error, latexmk will
keep running.
-% \fBlatexmk -c\fR \fI# remove .aux, .log, .bbl, .blg, .dep,
+% \fBlatexmk \-c\fR \fI# remove .aux, .log, .bbl, .blg, .dep,
.dvi, .pdf, .ps & .bbl files\fR
-.SH INITIALIZATION (RC) FILES
-.PP
+.SH "INITIALIZATION (RC) FILES"
+.PP
There are four initialization files ("RC files") that \fIlatexmk\fR can
read at startup:
-.PP
+.PP
1) The system RC file, if it exists.
On a UNIX system, \fIlatexmk\fR searches for following places for its
system RC file, in the following order, and reads the first it finds:
"/opt/local/share/latexmk/LatexMk",
"/usr/local/share/latexmk/LatexMk",
"/usr/local/lib/latexmk/LatexMk".
- On a MS-WINDOWS system it looks for "C:\\latexmk\\LatexMk".
-.PP
+ On Fedora systems, it only looks for "/etc/latexmk.conf".
+ On a MS\-WINDOWS system it looks for "C:\\latexmk\\LatexMk".
+.PP
2) The user's RC file in "$HOME/.latexmkrc", where $HOME is the value
of the environment variable HOME. On UNIX and clones (including LINUX),
this variable
-is set by the system; on MS-Windows, the user may choose to set it.
-.PP
+is set by the system; on MS\-Windows, the user may choose to set it.
+.PP
3) The RC file in the current working directory called "latexmkrc".
-.PP
-4) Any RC file(s) specified on the command line with the \fB-r\fR option.
-.PP
+.PP
+4) Any RC file(s) specified on the command line with the \fB\-r\fR option.
+.PP
Each RC file is a sequence of Perl commands. Usually it will be just a
-sequence of assignment statements that override the built-in settings of
+sequence of assignment statements that override the built\-in settings of
\fILatexmk\fR. Comment lines are introduced by the "#" character.
Note that command line options are obeyed in the order in which
they are written; thus any RC file specified on the command line with
-the \fB-r\fR option can override previous options but can be itself
+the \fB\-r\fR option can override previous options but can be itself
overridden by later options on the command line.
-.SH RC VARIABLES IN INITIALIZATION FILES
-.PP
+.SH "RC VARIABLES IN INITIALIZATION FILES"
+.PP
Many of the available variables that can be set are shown in the next
section. Syntax for the statements in an initialization file is of
the form:
-.PP
+.PP
$bibtex = 'bibtex';
-.PP
+.PP
for the setting of a string variable,
-.PP
+.PP
$preview_mode = 1;
-.PP
+.PP
for the setting of a numeric variable, and
-.PP
+.PP
@default_files = ('paper', 'paper1');
-.PP
+.PP
for the setting of an array of strings.
Some of the variables set the names of the commands that \fIlatexmk\fR
@@ -472,37 +473,37 @@
\fB"Detaching" a command\fR: If a command is to be run detached this
is indicated by preceding it with "start", as in
-.PP
+.PP
$dvi_previewer = 'start xdvi';
-.PP
+.PP
This will be translated to whatever is appropriate for your operating
system. (Note: in some circumstances, \fIlatex\fR will always run a
command detached. This is the case for a previewer in preview
continuous mode, since otherwise previewing continuously makes no
sense.)
-\fBCommand names containing spaces\fR: Under MS-Windows it is common
+\fBCommand names containing spaces\fR: Under MS\-Windows it is common
that the name of a command includes spaces, since software is often
installed in a subdirectory of "C:\Program Files". Such command names
should be enclosed in double quotes, as in
$lpr_pdf = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p';
-\fBUsing MS-Windows file associations\fR: A useful trick under modern
-versions of MS-Windows (e.g., WinXP) is to use just the command
+\fBUsing MS\-Windows file associations\fR: A useful trick under modern
+versions of MS\-Windows (e.g., WinXP) is to use just the command
'start' by itself:
-.PP
+.PP
$dvi_previewer = 'start';
-.PP
-Under recent versions of MS-Windows, this will cause to be run
+.PP
+Under recent versions of MS\-Windows, this will cause to be run
whatever program the system has associated with dvi files. (The same
applies for a postscript viewer and a pdf viewer.)
\fBNot using a certain command\fR: If a command is not to be run, the
command name NONE is used, as in
-.PP
+.PP
$lpr = 'NONE lpr';
-.PP
+.PP
This means that an appropriate command has not been configured. The
string after the 'NONE' is effectively a comment.
@@ -512,9 +513,9 @@
Suppose you want \fIlatexmk\fR to use latex with source specials
enabled. Then you might use the following line in an initialization
file:
-.PP
- $latex = 'latex --src-specials';
-.PP
+.PP
+ $latex = 'latex \-\-src\-specials';
+.PP
\fBAdvanced tricks\fR: Normally \fIlatexmk\fR assumes certain behavior
for commands and in particular it assumes certain kinds and ordering
@@ -522,50 +523,50 @@
example you might want to use Distiller to convert postscript files to
pdf files. You cannot simply change the name of the ps2pdf conversion
program, as in
-.PP
+.PP
$ps2pdf = 'distiller'; ######### WRONG
-.PP
+.PP
because the command line arguments will be wrong. In such a
-situation, your best bet is to write a batch file (under MS-Windows) or
+situation, your best bet is to write a batch file (under MS\-Windows) or
a script (under UNIX) that will do the conversion. Then you set
-.PP
+.PP
$ps2pdf = 'special_script';
-.PP
+.PP
Your script will be invoked by \fIlatexmk\fR in its usual way as
"Special_script file.ps file.pdf". Your script calls Distiller with
Distiller's correct arguments.
-.SH LIST OF RC VARIABLES IN INITIALIZATION FILES
-.PP
+.SH "LIST OF RC VARIABLES IN INITIALIZATION FILES"
+.PP
Default values are indicated in brackets.
-.TP
+.TP
.B $banner [0]
If nonzero, the banner message is printed across each page when converting
the dvi file to postscript. Without modifying $banner_message, this is
-equivalent to specifying the \fB-d\fR option.
+equivalent to specifying the \fB\-d\fR option.
Note that if \fB$banner\fR is nonzero, the \fB$postscript_mode\fR is
assumed and the postscript file is always generated, even if it is newer
than the dvi file.
-.TP
+.TP
.B $banner_intensity [0.95]
-Equivalent to the \fB-bi\fR option, this is a decimal number between 0
+Equivalent to the \fB\-bi\fR option, this is a decimal number between 0
and 1 that specifies how dark to print the banner message. 0 is black,
1 is white. The default is just right if your toner cartridge isn't
running too low.
-.TP
+.TP
.B $banner_message ["DRAFT"]
The banner message to print across each page when converting the dvi
-file to postscript. This is equivalent to the \fB-bm\fR option.
-.TP
+file to postscript. This is equivalent to the \fB\-bm\fR option.
+.TP
.B $banner_scale [220.0]
A decimal number that specifies how large the banner message will be
printed. Experimentation is necessary to get the right scale for your
message, as a rule of thumb the scale should be about equal to 1100
divided by the number of characters in the message. The Default is
just right for 5 character messages. This is equivalent to the
-\fB-bs\fR option.
-.TP
+\fB\-bs\fR option.
+.TP
.B @BIBINPUTS
This is an array variable that specifies directories where
\fIlatexmk\fR should look for .bib files. By default it is set from
@@ -588,13 +589,13 @@
This variable is likely to become obsolete in a future version of
\fIlatexmk\fR which uses a better method of searching for files.
-.TP
+.TP
.B $bibtex ["bibtex"]
The BibTeX processing program.
-.TP
-.B $bibtex_silent_switch ["-terse"]
+.TP
+.B $bibtex_silent_switch ["\-terse"]
\fBSwitch(es)\fR for the BibTeX processing program when silent mode is on.
-.TP
+.TP
.B $cleanup_mode [0]
If nonzero, specifies cleanup mode: 1 for full cleanup, 2 for cleanup
except for dvi, ps and pdf files, 3 for cleanup except for dep and aux
@@ -602,21 +603,21 @@
$clean_full_ext and @generated_exts variables.)
This variable is equivalent to specifying one of
-the \fB-c\fR, \fB-c1\fR, or \fB-C\fR options. But there should be no need
+the \fB\-c\fR, \fB\-c1\fR, or \fB\-C\fR options. But there should be no need
to set this variable from an RC file.
-.TP
+.TP
.B $clean_ext [""]
Extra extensions of files for \fIlatexmk\fR to remove when any of the
-clean-up options (\fB-c\fR, \fB-c1\fR, or \fB-C\fR) is selected.
-.TP
+clean\-up options (\fB\-c\fR, \fB\-c1\fR, or \fB\-C\fR) is selected.
+.TP
.B $clean_full_ext [""]
-Extra extensions of files for \fIlatexmk\fR to remove when the \fB-C\fR
+Extra extensions of files for \fIlatexmk\fR to remove when the \fB\-C\fR
option is selected, i.e., extensions of files to remove when the .dvi,
-etc files are to be cleaned-up.
-.TP
+etc files are to be cleaned\-up.
+.TP
.B @cus_dep_list [()]
-Custom dependency list -- see section on "Custom Dependencies".
-.TP
+Custom dependency list \-\- see section on "Custom Dependencies".
+.TP
.B @default_files [('*.tex')]
Default list of files to be processed.
@@ -643,30 +644,30 @@
is '.tex'. Wild cards are allowed. The parentheses are because
\fI@default_files\fR is an array variable, i.e., a sequence of
filename specifications is possible.
-.TP
+.TP
.B $dvi_filter [empty]
The dvi file filter to be run on the newly produced dvi file before
-other processing. Equivalent to specifying the \fB-dF\fR option.
-.TP
+other processing. Equivalent to specifying the \fB\-dF\fR option.
+.TP
.B $dvi_previewer ["start xdvi" under UNIX]
-The command to invoke a dvi-previewer.
-[Default is "start" under MS-WINDOWS; under more recent versions of
+The command to invoke a dvi\-previewer.
+[Default is "start" under MS\-WINDOWS; under more recent versions of
Windows, this will cause to be run whatever command the system has
associated with .dvi files.]
-.TP
+.TP
.B $dvi_previewer_landscape ["start xdvi"]
-The command to invoke a dvi-previewer in landscape mode.
-[Default is "start" under MS-WINDOWS; under more recent versions of
+The command to invoke a dvi\-previewer in landscape mode.
+[Default is "start" under MS\-WINDOWS; under more recent versions of
Windows, this will cause to be run whatever command the system has
associated with .dvi files.]
-.TP
+.TP
.B $dvipdf ["dvipdf"]
Command to convert dvi to pdf file.
WARNING1: The default dvipdf
script generates pdf files with bitmapped fonts, which don't look
good when viewed by acroread. The script should be modified to give
-dvips the options "-P pdf" to ensure that type 1 fonts are used in the
+dvips the options "\-P pdf" to ensure that type 1 fonts are used in the
pdf file.
WARNING 2: If you want to use one of the programs dvipdfm or dvipdfmx
@@ -676,29 +677,29 @@
the command line. See the extra_scripts directory of the latexmk
distribution, where the necessary scripts dvipdfm_call, etc are to be
found, together with instructions for their use in the file README1.
-.TP
+.TP
.B $dvips ["dvips"]
The program to used as a filter to convert a .dvi file to a .ps file.
If pdf is going to be generated from pdf, then the value of the
-$dvips_pdf_switch -- see below -- will be appended.
-.TP
-.B $dvips_landscape ["dvips -tlandscape"]
+$dvips_pdf_switch \-\- see below \-\- will be appended.
+.TP
+.B $dvips_landscape ["dvips \-tlandscape"]
The program to used as a filter to convert a .dvi file to a .ps file
in landscape mode.
-.TP
-.B $dvips_pdf_switch ["-P pdf"]
+.TP
+.B $dvips_pdf_switch ["\-P pdf"]
Switch(es) for dvips program when pdf file is to be generated from
ps file.
-.TP
-.B $dvips_silent_switch ["-q"]
+.TP
+.B $dvips_silent_switch ["\-q"]
Switch(es) for dvips program when silent mode is on.
-.TP
+.TP
.B $dvi_update_command [""]
When the dvi previewer is set to be updated by running a command, this
is the command that is run. See the information for the variable
\fI$dvi_update_method\fR.
-.TP
-.B $dvi_update_method [2 under UNIX, 1 under MS-Windows]
+.TP
+.B $dvi_update_method [2 under UNIX, 1 under MS\-Windows]
How the dvi viewer updates its display when the dvi file has changed.
0 => update is automatic,
1=> manual update by user, which may only mean a mouse click on the
@@ -706,26 +707,26 @@
2 => Send the signal, whose number is in the variable
$dvi_update_signal. The default value under UNIX is suitable for xdvi.
3 => Viewer cannot do an update, because it locks the file. (As with
-acroread under MS-Windows.)
+acroread under MS\-Windows.)
4 => run a command to do the update. The command is specified by
the variable $dvi_update_command.
-.TP
-.B $dvi_update_signal [Under UNIX: SIGUSR1, which is a system-dependent value]
+.TP
+.B $dvi_update_signal [Under UNIX: SIGUSR1, which is a system\-dependent value]
The number of the signal that is sent to the dvi viewer when it is
-updated by sending a signal -- see $dvi_update_method. The default
+updated by sending a signal \-\- see $dvi_update_method. The default
value is the one appropriate for xdvi on a UNIX system.
-.TP
+.TP
.B $fdb_ext ["fdb_latex"]
The extension of the file which \fIlatexmk\fR generates to contain a
database of information on source files. You will not normally need
to change this.
-.TP
+.TP
.B $force_mode [0]
If nonzero, continue processing past minor \fIlatex\fR errors
including unrecognized cross references. Equivalent to specifying the
-\fB-f\fR option.
-Note that specifying the \fB-pvc\fR sets $force_mode to 1.
-.TP
+\fB\-f\fR option.
+Note that specifying the \fB\-pvc\fR sets $force_mode to 1.
+.TP
.B @generated_exts [( 'ind', 'lof', 'lot', 'out', 'toc', $fdb_ext)]
This contains a list of extensions for files that are generated
(directly or indirectly) during a LaTeX run and that are read in by
@@ -750,38 +751,38 @@
adds the extension 'end' to the list of predefined generated
extensions.
-.TP
+.TP
.B $go_mode [0]
If nonzero, process files regardless of timestamps. Equivalent to the
-\fB-g\fR option.
-.TP
+\fB\-g\fR option.
+.TP
.B $index_mode [0 and then as determined from the results of a run]
If nonzero, run \fImakeindex\fR to produce index of document.
Normally you should not need to set this variable in an RC file, since
latexmk determines automatically if \fImakeindex\fR needs to be run.
-.TP
+.TP
.B $landscape_mode [0]
If nonzero, run in landscape mode, using the landscape mode previewers and
-dvi to postscript converters. Equivalent to the \fB-l\fR option.
+dvi to postscript converters. Equivalent to the \fB\-l\fR option.
Normally not needed with current previewers.
-.TP
+.TP
.B $latex ["latex"]
The LaTeX processing program. Note that as with other programs, you
can use this variable not just to change the name of the program used,
but also specify options to the program. E.g.,
- $latex = 'latex --src-specials';
-.TP
-.B $latex_silent_switch ["-interaction=batchmode"]
+ $latex = 'latex \-\-src\-specials';
+.TP
+.B $latex_silent_switch ["\-interaction=batchmode"]
\fBSwitch(es)\fR for the LaTeX processing program when silent mode is on.
-Under MS-Windows, the default value is changed to
-"-interaction=batchmode -c-style-errors", as used by MikTeX and fpTeX.
-.TP
+Under MS\-Windows, the default value is changed to
+"\-interaction=batchmode \-c\-style\-errors", as used by MikTeX and fpTeX.
+.TP
.B $lpr ["lpr"]
-[Default is "NONE lpr" under MS-WINDOWS.]
+[Default is "NONE lpr" under MS\-WINDOWS.]
The command to print postscript files.
-Under MS-Windows (unlike UNIX/LINUX), there is no standard program for
+Under MS\-Windows (unlike UNIX/LINUX), there is no standard program for
printing files. But there are ways you can do it. For example, if
you have gsview installed, you could use it with the option '/p':
@@ -795,14 +796,14 @@
the command obeyed; this is necessary because one part of the command
name ('Program Files') contains a space which would otherwise be
misinterpreted.
-.TP
+.TP
.B $lpr_dvi ["NONE lpr_dvi"]
The printing program to print dvi files.
-.TP
+.TP
.B $lpr_pdf ["NONE lpr_pdf"]
The printing program to print pdf files.
-Under MS-Windows you could set this to use gsview, if it is installed,
+Under MS\-Windows you could set this to use gsview, if it is installed,
e.g.,
$lpr = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p';
@@ -812,18 +813,18 @@
is necessary because one part of the command name ('Program Files')
contains a space which would otherwise be misinterpreted.
-.TP
+.TP
.B $makeindex ["makeindex"]
The index processing program.
-.TP
+.TP
.B $new_viewer_always [0]
This variable applies to \fIlatexmk\fR \fBonly\fR in
-continuous-preview mode. If $new_viewer_always is 0,
+continuous\-preview mode. If $new_viewer_always is 0,
\fIlatexmk\fR will check for a previously running previewer on the
same file, and if one is running will not start a new one. If
-$new_viewer_always is non-zero, this check will be skipped, and
+$new_viewer_always is non\-zero, this check will be skipped, and
\fIlatexmk\fR will behave as if no viewer is running.
-.TP
+.TP
.B $pdf_mode [0]
If zero, do NOT generate a pdf version of the document.
If equal to 1, generate a pdf version of the document using pdflatex.
@@ -831,153 +832,153 @@
file, by using the command specified by the $ps2pdf variable.
If equal to 3, generate a pdf version of the document from the dvi
file, by using the command specified by the $dvipdf variable.
-Equivalent to the \fB-pdf-\fR, \fB-pdf\fR, \fB-pdfdvi\fR,
-\fB-pdfps\fR options.
-.TP
+Equivalent to the \fB\-pdf\-\fR, \fB\-pdf\fR, \fB\-pdfdvi\fR,
+\fB\-pdfps\fR options.
+.TP
.B $pdflatex ["pdflatex"]
The LaTeX processing program in the version that makes a pdf file instead
of a dvi file.
-.TP
-.B $pdflatex_silent_switch ["-interaction=batchmode"]
+.TP
+.B $pdflatex_silent_switch ["\-interaction=batchmode"]
Switch(es) for the LaTeX processing program when silent mode is on.
-Under MS-Windows, the default value is changed to
-"-interaction=batchmode -c-style-errors", as used by MikTeX and fpTeX.
-.TP
+Under MS\-Windows, the default value is changed to
+"\-interaction=batchmode \-c\-style\-errors", as used by MikTeX and fpTeX.
+.TP
.B $pdf_previewer ["start acroread"]
-The command to invoke a pdf-previewer.
-[Default is changed to "start" on MS-WINDOWS; under more recent versions of
+The command to invoke a pdf\-previewer.
+[Default is changed to "start" on MS\-WINDOWS; under more recent versions of
Windows, this will cause to be run whatever command the system has
associated with .pdf files.]
-Potential problem under MS-Windows:
+Potential problem under MS\-Windows:
if acroread is used as the pdf previewer, and it is
actually viewing a pdf file, the pdf file cannot be updated. Thus
makes acroread a bad choice of previewer if you use \fIlatexmk\fR's
-previous-continuous mode (option \fB-pvc\fR) under MS-windows.
+previous\-continuous mode (option \fB\-pvc\fR) under MS\-windows.
This problem does not occur if ghostview, gv or gsview is used to
view pdf files.
-.TP
+.TP
.B $pdf_update_command [""]
When the pdf previewer is set to be updated by running a command, this
is the command that is run. See the information for the variable
\fI$pdf_update_method\fR.
-.TP
-.B $pdf_update_method [1 under UNIX, 3 under MS-Windows]
+.TP
+.B $pdf_update_method [1 under UNIX, 3 under MS\-Windows]
How the pdf viewer updates its display when the pdf file has
changed. See $dvi_update_method for the codes, with the change that
for the value 4, to run a command to do the update, the command is
specified by the variable $pdf_update_command.
-Note that acroread under MS-Windows (but not UNIX) locks the pdf file, so
+Note that acroread under MS\-Windows (but not UNIX) locks the pdf file, so
the default value is then 3.
-.TP
-.B $pdf_update_signal [Under UNIX: SIGHUP, which is a system-dependent value]
+.TP
+.B $pdf_update_signal [Under UNIX: SIGHUP, which is a system\-dependent value]
The number of the signal that is sent to the pdf viewer when it is
-updated by sending a signal -- see $pdf_update_method. The default
+updated by sending a signal \-\- see $pdf_update_method. The default
value is the one appropriate for gv on a UNIX system.
-.TP
-.B $pid_position = [1 under UNIX, -1 under MS-Windows]
+.TP
+.B $pid_position = [1 under UNIX, \-1 under MS\-Windows]
Command used to get all the processes currently run by the user.
-The -pvc option uses the command specified by the variable $pscmd to
+The \-pvc option uses the command specified by the variable $pscmd to
determine if there is an already running previewer, and to find the
process ID (needed if \fIlatexmk\fR needs to signal the previewer about
file changes). The variable $pid_position is used to specify which word
in lines of the output from $pscmd corresponds to the process ID. The
first word in the line is numbered 0. The default value of 1 (2nd word in
-line) is correct for Solaris 2.6 and Linux. Setting the variable to -1 is
+line) is correct for Solaris 2.6 and Linux. Setting the variable to \-1 is
used to indicate that $pscmd is not to be used.
-.TP
+.TP
.B $postscript_mode [0]
If nonzero, generate a postscript version of the document.
-Equivalent to the \fB-ps\fR option.
-.TP
+Equivalent to the \fB\-ps\fR option.
+.TP
.B $preview_continuous_mode [0]
If nonzero, run a previewer to view the document, and
-continue running \fIlatexmk\fR to keep .dvi up-to-date. Equivalent to
-the \fB-pvc\fR option.
+continue running \fIlatexmk\fR to keep .dvi up\-to\-date. Equivalent to
+the \fB\-pvc\fR option.
Which previewer is run depends on the other settings, see the command
-line options \fB-view=\fR, and the variable \fI$view\fR.
-.TP
+line options \fB\-view=\fR, and the variable \fI$view\fR.
+.TP
.B $preview_mode [0]
If nonzero, run a previewer to preview the document.
-Equivalent to the \fB-pv\fR option.
+Equivalent to the \fB\-pv\fR option.
Which previewer is run depends on the other settings, see the command
-line options \fB-view=\fR, and the variable \fI$view\fR.
-.TP
+line options \fB\-view=\fR, and the variable \fI$view\fR.
+.TP
.B $printout_mode [0]
If nonzero, print the document using \fIlpr\fR. Equivalent to the
-\fB-p\fR option. This is recommended \fBnot\fR to be set from an RC
+\fB\-p\fR option. This is recommended \fBnot\fR to be set from an RC
file, otherwise you could waste lots of paper.
-.TP
+.TP
.B $print_type = ["ps"]
Type of file to printout: possibilities are "dvi", "none", "pdf", or
"ps".
-.TP
+.TP
.B $pscmd
-[On UNIX, the default is "ps -f -u $ENV{USER}", with changes for Linux
-and OS-X.
-On MS-WINDOWS the default in "NONE pscmd".]
+[On UNIX, the default is "ps \-f \-u $ENV{USER}", with changes for Linux
+and OS\-X.
+On MS\-WINDOWS the default in "NONE pscmd".]
Command used to get all the processes currently run by the user. This
-is used by the -pvc option to determine if there is an already running
+is used by the \-pvc option to determine if there is an already running
previewer.
The command line options for this command under the different flavors of
UNIX are quite variable. The command given above is suitable for Solaris
2.6 and above, and \fIlatexmk\fR corrects it for Linux and OSX.
NOTE: The variable \fI$pid_position\fR must also be set; see its description.
-.TP
+.TP
.B $ps2pdf ["ps2pdf"]
Command to convert ps to pdf file.
-.TP
+.TP
.B $ps_filter [empty]
The postscript file filter to be run on the newly produced postscript
-file before other processing. Equivalent to specifying the \fB-pF\fR
+file before other processing. Equivalent to specifying the \fB\-pF\fR
option.
-.TP
-.B $ps_previewer ["start gv -watch"]
-The command to invoke a ps-previewer.
-[Default is "start" on MS-WINDOWS; under more recent versions of
+.TP
+.B $ps_previewer ["start gv \-watch"]
+The command to invoke a ps\-previewer.
+[Default is "start" on MS\-WINDOWS; under more recent versions of
Windows, this will cause to be run whatever command the system has
associated with .ps files.]
-Note that gv with the -watch option updates its display whenever the
+Note that gv with the \-watch option updates its display whenever the
postscript file changes, whereas ghostview does not.
-.TP
-.B $ps_previewer_landscape ["start gv -swap -watch"]
-The command to invoke a ps-previewer in landscape mode.
-[Default is "start" on MS-WINDOWS; under more recent versions of
+.TP
+.B $ps_previewer_landscape ["start gv \-swap \-watch"]
+The command to invoke a ps\-previewer in landscape mode.
+[Default is "start" on MS\-WINDOWS; under more recent versions of
Windows, this will cause to be run whatever command the system has
associated with .ps files.]
-.TP
+.TP
.B $ps_update_command [""]
When the postscript previewer is set to be updated by running a command, this
is the command that is run. See the information for the variable
\fI$ps_update_method\fR.
-.TP
-.B $ps_update_method [0 under UNIX, 1 under MS-Windows]
+.TP
+.B $ps_update_method [0 under UNIX, 1 under MS\-Windows]
How the postscript viewer updates its display when the ps file has
changed. See $dvi_update_method for the codes, with the change that
for the value 4, to run a command to do the update, the command is
specified by the variable $ps_update_command.
-.TP
-.B $ps_update_signal [Under UNIX: SIGHUP, which is a system-dependent value]
+.TP
+.B $ps_update_signal [Under UNIX: SIGHUP, which is a system\-dependent value]
The number of the signal that is sent to the pdf viewer when it is
-updated by sending a signal -- see $ps_update_method. The default
+updated by sending a signal \-\- see $ps_update_method. The default
value is the one appropriate for gv on a UNIX system.
-.TP
+.TP
.B $sleep_time [2]
The time to sleep (in seconds) between checking for source file
-changes when running the \fB-pvc\fR option.
-.TP
+changes when running the \fB\-pvc\fR option.
+.TP
.B $texfile_search [""]
This is an obsolete variable, replaced by the \fI@default_files\fR
variable.
For backward compatibility, if you choose to set
-\fI$texfile_search\fR, it is a string of space-separated filenames, and
+\fI$texfile_search\fR, it is a string of space\-separated filenames, and
then \fIlatexmk\fR replaces \fI@default_files\fR with the filenames in
\fI$texfile_search\fR to which is added '*.tex'.
-.TP
+.TP
.B $tmpdir [See below for default]
Directory to store temporary files that \fIlatexmk\fR may generate while
running.
@@ -986,62 +987,62 @@
\fI$tmpdir\fR to the value of the first of whichever of the system
environment variables TMPDIR or TEMP exists, otherwise to the current
directory. Under other operating systems (expected to be UNIX/Linux,
-including OS-X), the default is the value of the system environment
+including OS\-X), the default is the value of the system environment
variable TMPDIR if it exists, otherwise to "/tmp".
-.TP
+.TP
.B $view ["default"]
Which kind of file is to be previewed if a previewer is used. The
possible values are 'default', 'dvi', 'ps', 'pdf'. The value of
"default" means that the "highest" of the kinds of file generated is
to be used (among dvi, ps and pdf).
-.SH CUSTOM DEPENDENCIES
-.PP
+.SH "CUSTOM DEPENDENCIES"
+.PP
In any RC file a set of custom dependencies can be set up to convert a
file with one extension to a file with another. An example use of this
-would be to allow \fIlatexmk\fR to convert a \fI.fig\fR file to
+would be to allow \fIlatexmk\fR to convert a \fI.fi g\fR file to
\fI.eps\fR to be included in the \fI.tex\fR file. A table of custom
dependencies are set up by using the \fB@cus_dep_list\fR array. Each
string in the array has four arguments, separated by a space:
-.TP
+.TP
.B from extension:
The extension of the file we are converting from (e.g. "fig").
-.TP
+.TP
.B to extension:
The extension of the file we are converting to (e.g. "eps").
-.TP
+.TP
.B must:
-If non-zero, the file we are converting from \fBmust\fR exist, if it
+If non\-zero, the file we are converting from \fBmust\fR exist, if it
doesn't exist \fIlatexmk\fR will give an error message and exit unless
-the \fB-f\fR option is specified. If \fImust\fR is zero and the file
+the \fB\-f\fR option is specified. If \fImust\fR is zero and the file
we are converting from doesn't exist, then no action is taken.
-.TP
+.TP
.B function:
The name of the subroutine that \fIlatexmk\fR should call to perform the
file conversion. The first argument to the subroutine is the base name
of the file to be converted without any extension. The subroutines are
declared in the syntax of \fIperl\fR. The function should return 0 if
it was successful and a nonzero number if it failed.
-.PP
-Example in an RC file to convert a \fI.fig\fR file to a \fI.eps\fR file:
+.PP
+Example in an RC file to convert a \fI.fi g\fR file to a \fI.eps\fR file:
@cus_dep_list = (@cus_dep_list, "fig eps 0 fig2eps");
sub fig2eps
{
- system("fig2dev -Lps $_[0].fig $_[0].eps");
+ system("fig2dev \-Lps $_[0].fi g $_[0].eps");
}
-The subroutine \fIfig2eps\fR will only be called if the \fI.fig\fR file
+The subroutine \fIfig2eps\fR will only be called if the \fI.fi g\fR file
was modified more recently then the \fI.eps\fR file, or the \fI.eps\fR
file does not exist.
-If the return value of the subroutine is non-zero, then \fIlatexmk\fR
+If the return value of the subroutine is non\-zero, then \fIlatexmk\fR
will assume an error occurred during the execution of the subroutine.
-.SH SEE ALSO
+.SH "SEE ALSO"
latex(1), bibtex(1).
-.SH BUGS
+.SH "BUGS"
Search for .bib files is not correct if they are not in the current
directory; the problem is that the log file generated by bibtex does not
give the full path to the .bib files. The easiest fix at the moment is to
@@ -1062,29 +1063,29 @@
Gv on UNIX/LINUX works for both postscript and pdf.
Ghostview on UNIX/LINUX needs a manual update (reopen); it views
postscript and pdf.
-Gsview under MS-Windows works for both postscript and pdf,
+Gsview under MS\-Windows works for both postscript and pdf,
but only reads the updated file when its screen is refreshed.
Acroread under UNIX/LINUX views pdf, but the file needs to be closed
and reopened to view an updated version.
-Under MS-Windows, acroread locks its input file and so the
+Under MS\-Windows, acroread locks its input file and so the
pdf file cannot be updated. (Remedy: configure \fIlatexmk\fR use gsview
instead.)
-.SH THANKS TO
+.SH "THANKS TO"
Authors of previous versions. Many users with their feedback, and
especially
David Coppit (username david at node coppit.org) who made many useful
suggestions that contributed to version 3. (Please note that the
-e-mail addresses are not written in their standard form to avoid being
+e\-mail addresses are not written in their standard form to avoid being
harvested by worms and viruses.)
-.SH AUTHOR
+.SH "AUTHOR"
Current version, with substantial modifications, enhancements and bug
fixes by John Collins (username collins at node phys.psu.edu).
(Version 3.09).
It can be obtained from CTAN:
-<http://www.tug.org/tex-archive/support/latexmk/>, and from the
+<http://www.tug.org/tex\-archive/support/latexmk/>, and from the
author's website <http://www.phys.psu.edu/~collins/software/latexmk/>.
-.br
+.br
Modifications and enhancements by Evan McLean (Version 2.0)
-.br
+.br
Original script called "go" by David J. Musliner (RCS Version 3.2)
diff -dur latexmk-3.20.ORIG/latexmk.pl latexmk-3.20/latexmk.pl
--- latexmk-3.20.ORIG/latexmk.pl 2007-08-31 21:46:47.000000000 -0600
+++ latexmk-3.20/latexmk.pl 2007-08-31 21:45:50.000000000 -0600
@@ -584,10 +584,8 @@
## /usr/local/share, depending on the local conventions.
## /usr/local/lib/latexmk/LatexMk is put in the list for
## compatibility with older versions of latexmk.
- @rc_system_files =
- ( '/opt/local/share/latexmk/LatexMk',
- '/usr/local/share/latexmk/LatexMk',
- '/usr/local/lib/latexmk/LatexMk' );
+ ## Fedora change: only look in /etc
+ @rc_system_files = ( '/etc/latexmk.conf' );
$search_path_separator = ':'; # Separator of elements in search_path