diff -dur latexmk-3.08n.ORIG/latexmk.1 latexmk-3.08n/latexmk.1 --- latexmk-3.08n.ORIG/latexmk.1 2007-02-16 13:03:38.000000000 -0700 +++ latexmk-3.08n/latexmk.1 2007-02-27 11:59:26.000000000 -0700 @@ -1,9 +1,9 @@ -.TH LATEXMK 1L "16 February 2007" "" -.SH NAME +.TH "LATEXMK" "1L" "16 February 2007" "" "" +.SH "NAME" latexmk \- generate LaTeX document -.SH SYNOPSIS +.SH "SYNOPSIS" .B latexmk [options] [file ...] -.SH DESCRIPTION +.SH "DESCRIPTION" .I LatexMk completely automates the process of compiling a LaTeX document. Essentially, it is a highly specialized relative of the general @@ -13,10 +13,10 @@ to run continuously with a previewer; in that case the latex program, etc, are rerun whenever one of the source files is modified. -.PP +.PP \fILatexmk\fR will normally determine which are the source files by examining the log file. It has an option to parse the TeX file instead ---- see later. When \fIlatexmk\fR is run, it will examine the timestamps +\-\-\- see later. When \fIlatexmk\fR is run, it will examine the timestamps on the source files. If any of the source files have been changed since the last document generation, \fIlatexmk\fR will run the various LaTeX processing @@ -27,39 +27,39 @@ With some macro packages and document styles four, or even more, runs may be needed. If necessary, \fIlatexmk\fR will also run bibtex and/or makeindex. -.PP -[If the option \fB-it\fR to scan the LaTeX file is used, the main LaTeX +.PP +[If the option \fB\-it\fR to scan the LaTeX file is used, the main LaTeX file and all input and included files (recursively) are scanned for LaTeX commands for inputting and including other TeX files and figure files. Then on subsequent runs, -\fIlatexmk\fR with the \fB-it\fR switch reads the dependency +\fIlatexmk\fR with the \fB\-it\fR switch reads the dependency information from this file. If the dependencies of the document are changed (e.g., by adding or removing an \\input command), an additional -pass of \fIlatexmk -i\fR or \fIlatexmk -I\fR will update the dependency +pass of \fIlatexmk \-i\fR or \fIlatexmk \-I\fR will update the dependency file.] -.PP +.PP \fILatexmk\fR has two different previewing options. In the simple -\fB-pv\fR option, a dvi, postscript or pdf previewer is automatically run +\fB\-pv\fR option, a dvi, postscript or pdf previewer is automatically run after generating the dvi, postscript or pdf version of the document. The -type of viewer is selected automatically depending on the \fB-ps\fR, -\fB-pdf\fR or \fB-pdfps\fR options. The kind of file to be viewed can -also be explicitly selected by using the \fB-view\fR option -(\fB-view=ps\fR, etc). -.PP +type of viewer is selected automatically depending on the \fB\-ps\fR, +\fB\-pdf\fR or \fB\-pdfps\fR options. The kind of file to be viewed can +also be explicitly selected by using the \fB\-view\fR option +(\fB\-view=ps\fR, etc). +.PP The second previewing option is -the powerful \fB-pvc\fR option (mnemonic: "preview continuously"). +the powerful \fB\-pvc\fR option (mnemonic: "preview continuously"). Particularly when a document is reaching the final stages of editing, it is often useful to have a previewer open continuously and have it update its display whenever changes are made to the source file(s), and this -is done by the \fB-pvc\fR option. With this option, \fIlatexmk\fR +is done by the \fB\-pvc\fR option. With this option, \fIlatexmk\fR runs a previewer for the document, and then \fIlatexmk\fR repeatedly monitors the source files of the document to see if any changes have been made since the last dependent file was produced. When changes are detected, \fIlatexmk\fR runs the appropriate LaTeX commands to regenerate the .dvi, .ps and/or .pdf files -(depending on the which of the \fB-ps\fR, \fB-pdf\fR and \fB-pdfps\fR +(depending on the which of the \fB\-ps\fR, \fB\-pdf\fR and \fB\-pdfps\fR options was specified). A good previewer (like \fIgv\fR) will then automatically update its display. Thus the user can simply edit a file and, when the @@ -67,24 +67,24 @@ cycle of updating the .dvi (and possibly the .ps and .pdf) file, and refreshing the previewer's display. It's not quite WYSIWYG, but usefully close. -.PP +.PP For other previewers, the user will have to manually make the previewer update its display, which can be (xdvi and gsview) as forcing a redraw of its display. -.PP +.PP \fILatexmk\fR has the ability to print a banner in gray diagonally across each page when making the postscript file. It can also, if needed, call an external program to do other postprocessing on the generated files. -.PP +.PP \fILatexmk\fR is highly configurable, both from the command line and in configuration files, so that it can accommodate a wide variety of user needs and system configurations. -.SH LATEXMK OPTIONS AND ARGUMENTS -(All options can be introduced by single or double "-" characters, -e.g., "latexmk -help" or "latexmk --help".) -.TP +.SH "LATEXMK OPTIONS AND ARGUMENTS" +(All options can be introduced by single or double "\-" characters, +e.g., "latexmk \-help" or "latexmk \-\-help".) +.TP .B file One or more files can be specified. If no files are specified, \fIlatexmk\fR will, by default, run on all files in the current working directory @@ -97,72 +97,72 @@ latexmk foo then \fIlatexmk\fR will operate on the file "foo.tex". -.TP -.B -bm +.TP +.B \-bm A banner message to print diagonally across each page when converting the dvi file to postscript. The message must be a single argument on the command line so be careful with quoting spaces and such. -Note that if the \fB-bm\fR option is specified, the \fB-ps\fR option is +Note that if the \fB\-bm\fR option is specified, the \fB\-ps\fR option is assumed and the postscript file is always generated, even if it is newer than the dvi file. -.TP -.B -bi +.TP +.B \-bi How dark to print the banner message. A decimal number between 0 and 1. 0 is black and 1 is white, default is 0.95 which is OK unless your toner cartridge is getting low. -.TP -.B -bs +.TP +.B \-bs A decimal number that specifies how large the banner message will be printed. Experimentation is necessary to get the right scale for your message, as a rule of thumb the scale should be about equal to 1100 divided by the number of characters in the message. Default is 220.0 which is just right for 5 character messages. .TP -.B -commands +.B \-commands List the commands used by \fIlatexmk\fR for processing files, and then exit. .TP -.B -c +.B \-c Clean up (remove) all regenerateable files generated by \fIlatex\fR and \fIbibtex\fR except dvi, postscript and pdf. In addition, files specified by the $clean_ext configuration variable are removed. -This cleanup is instead of a regular make. See the \fB-gg\fR option +This cleanup is instead of a regular make. See the \fB\-gg\fR option if you want to do a cleanup than a make. .TP -.B -C +.B \-C Clean up (remove) all regenerateable files generated by \fIlatex\fR and \fIbibtex\fR including aux, dep, dvi, postscript and pdf. In addition, those specified by the $clean_ext and $clean_full_ext configuration variables. -This cleanup is instead of a regular make. See the \fB-gg\fR option +This cleanup is instead of a regular make. See the \fB\-gg\fR option if you want to do a cleanup than a make. -.TP -.B -c1 +.TP +.B \-c1 Clean up (remove) all regenerateable files generated by \fIlatex\fR and \fIbibtex\fR except aux and dep. In addition, files specified by the $clean_ext and $clean_full_ext configuration variables are removed. -This cleanup is instead of a regular make. See the \fB-gg\fR option +This cleanup is instead of a regular make. See the \fB\-gg\fR option if you want to do a cleanup than a make. .TP -.B -d +.B \-d Set draft mode. This prints the banner message "DRAFT" across your page when converting the dvi file to postscript. Size and intensity -can be modified with the \fB-bs\fR and \fB-bi\fR options. The \fB-bm\fR +can be modified with the \fB\-bs\fR and \fB\-bi\fR options. The \fB\-bm\fR option will override this option as this is really just a short way of specifying: - latexmk -bm DRAFT + latexmk \-bm DRAFT -Note that if the \fB-d\fR option is specified, the \fB-ps\fR option is +Note that if the \fB\-d\fR option is specified, the \fB\-ps\fR option is assumed and the postscript file is always generated, even if it is newer than the dvi file. -.TP -.B -dF +.TP +.B \-dF Dvi file filtering. The argument to this option is a filter which will generate a filtered dvi file with the extension ".dviF". All extra processing (e.g. conversion to postscript, preview, printing) will then @@ -170,157 +170,157 @@ Example usage: To use dviselect to select only the even pages of the dvi file: - latexmk -dF 'dviselect even' foo.tex -.TP -.B -dvi + latexmk \-dF 'dviselect even' foo.tex +.TP +.B \-dvi Generate dvi version of document. -.TP -.B -dvi- +.TP +.B \-dvi\- Turn off generation of dvi version of document. (This may get overridden, if some other file is made (a .ps file) that is generated from the dvi file, or if no generated file at all is requested.) -.TP -.B -diagnostics +.TP +.B \-diagnostics Whenever a log file is parsed to determine the input and included files, print a list of these files. -.TP -.B -f +.TP +.B \-f Force \fIlatexmk\fR to continue document processing despite errors. Normally, when \fIlatexmk\fR detects that \fIlatex\fR has found an error which will not be resolved by further processing, the program terminates. -.TP -.B -f- -Turn off the forced processing-past-errors such as is set by the -\fB-f\fR option. This could be used to override a setting in a +.TP +.B \-f\- +Turn off the forced processing\-past\-errors such as is set by the +\fB\-f\fR option. This could be used to override a setting in a configuration file. -.TP -.B -F +.TP +.B \-F Force \fIlatexmk\fR to include files that don't exist when generating dependency files. A warning is produced instead of an error message and the program terminating. If the file name is not an absolute path, it is assumed to be relative to the current working directory. (Note: This -option is only relevant if you are using the \fB-it\fR to obtain the +option is only relevant if you are using the \fB\-it\fR to obtain the dependency information from the tex files. The default is to obtain -this information from the log file and it that case the \fB-F\fR +this information from the log file and it that case the \fB\-F\fR option has no effect.) -.TP -.B -F- -Turn off \fB-F\fR. -.TP -.B -g +.TP +.B \-F\- +Turn off \fB\-F\fR. +.TP +.B \-g Force \fIlatexmk\fR to process document, disregarding the timestamps of the source files. This option is useful, for example, if you change some options and wish to reprocess the files. -.TP -.B -g- -Turn off \fB-g\fR. -.TP -.B -gg +.TP +.B \-g\- +Turn off \fB\-g\fR. +.TP +.B \-gg "Super go mode" or "clean make": clean out generated files as if the -\fB-C\fR had been given, and then do a regular make. -.TP -.B -h, -help +\fB\-C\fR had been given, and then do a regular make. +.TP +.B \-h, \-help Print help information. -.TP -.B -i +.TP +.B \-i Generate new dependency file if root file is newer than dependency file or dependency file does not exist. The dependency information is taken from the log file or the source file, -depending on the setting made by the \fB-il\fR and \fB-it\fR switches. -.TP -.B -i- -Turn off \fB-i\fR. -.TP -.B -il +depending on the setting made by the \fB\-il\fR and \fB\-it\fR switches. +.TP +.B \-i\- +Turn off \fB\-i\fR. +.TP +.B \-il Extract dependency information from log file. This is normally the best method, so it is the default. However, some packages do not put information on files read in the log file, and then it may be better to -tell \fIlatexmk\fR to get the information from the TeX file(s) --- see the -switch \fB-it\fR. +tell \fIlatexmk\fR to get the information from the TeX file(s) \-\-\- see the +switch \fB\-it\fR. (Default) -.TP -.B -it +.TP +.B \-it Extract dependency information by scanning the source TeX file(s), rather than the log file. This is the method used by earlier versions of \fIlatexmk\fR. It relies on parsing TeX files, which can be confused by definitions of new commands, -etc. Normally it is better to tell \fIlatexmk\fR to scan the log file --- see -the switch \fB-il\fR. -.TP -.B -I +etc. Normally it is better to tell \fIlatexmk\fR to scan the log file \-\-\- see +the switch \fB\-il\fR. +.TP +.B \-I Always generate new dependency file, even if newer dependency file exists. The dependency information is taken from the log file or the source file, -depending on the setting made by the \fB-il\fR and \fB-it\fR switches. -.TP -.B -I- -Turn off \fB-I\fR. -.TP -.B -l +depending on the setting made by the \fB\-il\fR and \fB\-it\fR switches. +.TP +.B \-I\- +Turn off \fB\-I\fR. +.TP +.B \-l Run in landscape mode, using the landscape mode for the previewers and the dvi to postscript converters. -.TP -.B -l- -Turn off \fB-l\fR. -.TP -.B -new-viewer -When in continuous-preview mode, always start a new viewer to view the -generated file. By default, \fIlatexmk\fR will, in continuous-preview +.TP +.B \-l\- +Turn off \fB\-l\fR. +.TP +.B \-new\-viewer +When in continuous\-preview mode, always start a new viewer to view the +generated file. By default, \fIlatexmk\fR will, in continuous\-preview mode, test for a previously running previewer for the same file and not start a new one if a previous previewer is running. However, its -test sometimes fails (notably if there is an already-running previewer +test sometimes fails (notably if there is an already\-running previewer that is viewing a file of the same name as the current file, but in a different directory). This option turns off this default behavior. -.TP -.B -new-viewer- -The inverse of the \fR-new-viewer\fB option. It puts \fIlatexmk\fR -in its normal behavior that in preview-continuous mode it checks for -an already-running previewer. -.TP -.B -p +.TP +.B \-new\-viewer\- +The inverse of the \fR\-new\-viewer\fB option. It puts \fIlatexmk\fR +in its normal behavior that in preview\-continuous mode it checks for +an already\-running previewer. +.TP +.B \-p Print out the file. By default, this is done using lpr after generating the postscript version. But you can use the -\fB-print=...\fR option to print the dvi or pdf files instead, and you can +\fB\-print=...\fR option to print the dvi or pdf files instead, and you can configure this in a start up file (by setting the \fI$print_type\fR variable. -Under MS-Windows you must have configured the print commands used by +Under MS\-Windows you must have configured the print commands used by \fIlatexmk\fR. -This option is incompatible with the \fB-pv\fR and \fB-pvc\fR options, +This option is incompatible with the \fB\-pv\fR and \fB\-pvc\fR options, so it turns them off. -.TP -.B -pdf +.TP +.B \-pdf Generate pdf version of document using pdflatex. -.TP -.B -pdfdvi +.TP +.B \-pdfdvi Generate pdf version of document from the dvi file, by default using dvipdf. -.TP -.B -pdfps +.TP +.B \-pdfps Generate pdf version of document from the ps file, by default using ps2pdf. -.TP -.B -pdf- +.TP +.B \-pdf\- Turn off generation of pdf version of document. (This can be used to override a setting in a configuration file. It may get overridden if some other option requires the generation of a pdf file.) -.TP -.B -print=dvi, -print=ps, -print=pdf +.TP +.B \-print=dvi, \-print=ps, \-print=pdf Define which kind of file is printed. This option also ensures that the requisite file is made, and turns on printing. -.TP -.B -ps +.TP +.B \-ps Generate postscript version of document. -.TP -.B -ps- +.TP +.B \-ps\- Turn off generation of postscript version of document. This can be used to override a setting in a configuration file. (It may get overridden by some other option that requires a postscript file, for example a request for printing.) -.TP -.B -pF +.TP +.B \-pF Postscript file filtering. The argument to this option is a filter which will generate a filtered postscript file with the extension ".psF". All extra processing (e.g. preview, printing) will then be @@ -328,112 +328,112 @@ Example usage: Use psnup to print two pages on the one page: - latexmk -ps -pF 'psnup -2' foo.tex + latexmk \-ps \-pF 'psnup \-2' foo.tex or - latexmk -ps -pF "psnup -2" foo.tex + latexmk \-ps \-pF "psnup \-2" foo.tex -Whether to use single or double quotes round the "psnup -2" will depend on +Whether to use single or double quotes round the "psnup \-2" will depend on your command interpreter, in particular on the operating system. -.TP -.B -pv -Run file previewer. If the \fB-view\fR option is used, this will select +.TP +.B \-pv +Run file previewer. If the \fB\-view\fR option is used, this will select the kind of file to be previewed (dvi, ps or pdf). Otherwise the viewer views the "highest" kind of file selected, by the -\fB-dvi\fR, \fB-ps\fR, \fB-pdf\fR, \fB-pdfps\fR options, in the +\fB\-dvi\fR, \fB\-ps\fR, \fB\-pdf\fR, \fB\-pdfps\fR options, in the order dvi, ps, pdf (low to high). If no file type has been selected, the dvi previewer will be used. -This option is incompatible with the \fB-p\fR and \fB-pvc\fR options, +This option is incompatible with the \fB\-p\fR and \fB\-pvc\fR options, so it turns them off. -.TP -.B -pv- -Turn off \fB-pv\fR. -.TP -.B -pvc +.TP +.B \-pv\- +Turn off \fB\-pv\fR. +.TP +.B \-pvc Run a file previewer and continually update the .dvi, .ps, and/or .pdf files whenever changes are made to source files (see the Description above). Which of these files is generated and which is viewed is -governed by the other options, and is the same as for the \fB-pv\fR +governed by the other options, and is the same as for the \fB\-pv\fR option. -This option also turns on the \fB-f\fR option, since it is normally -desirable in preview-continuous-mode to continue working even if +This option also turns on the \fB\-f\fR option, since it is normally +desirable in preview\-continuous\-mode to continue working even if errors are found. -The preview-continuous option \fB-pvc\fR can only work with one file. +The preview\-continuous option \fB\-pvc\fR can only work with one file. So in this case you will normally only specify one filename on the command line. It is also incompatible with the -\fB-p\fR and \fB-pv\fR options, so it turns these options off +\fB\-p\fR and \fB\-pv\fR options, so it turns these options off With a good previewer the display will be automatically -updated. (Under UNIX "gv -watch" does this for postscript files; it +updated. (Under UNIX "gv \-watch" does this for postscript files; it would also do it for pdf files except for an apparent bug in gv that causes an error when the newly updated pdf file is read.) Other previewers will need a manual update. -Important note: the acroread program on MS-Windows locks the pdf file, +Important note: the acroread program on MS\-Windows locks the pdf file, and prevents new versions being written, so it is a bad idea to use -acroread to view pdf files in preview-continuous mode. It is better -to use a dvi or ps viewer, as set by one of the \fB-view=dvi\fR and -\fB-view=ps\fR options. +acroread to view pdf files in preview\-continuous mode. It is better +to use a dvi or ps viewer, as set by one of the \fB\-view=dvi\fR and +\fB\-view=ps\fR options. Note that if \fIlatexmk\fR dies because it encounters an error, the "forked" previewer will continue to run. Successive invocations with -the \fB-pvc\fR option will not fork new previewers, but \fIlatexmk\fR +the \fB\-pvc\fR option will not fork new previewers, but \fIlatexmk\fR will use the existing previewer. (At least this will happen when \fIlatexmk\fR is running under an operating system where it knows how to determine whether an existing previewer is running.) -.TP -.B -pvc- -Turn off \fB-pvc\fR. -.TP -.B -quiet -Same as -silent -.TP -.B -r +.TP +.B \-pvc\- +Turn off \fB\-pvc\fR. +.TP +.B \-quiet +Same as \-silent +.TP +.B \-r Read the specified initialization file ("RC file") before processing. -Be careful about the ordering: Standard initialization files --- see -the section below on "Initialization (RC) files" --- are read first, +Be careful about the ordering: Standard initialization files \-\-\- see +the section below on "Initialization (RC) files" \-\-\- are read first, then the options on the command line in the order they are given. -Thus an initialization file specified with the \fB-r\fR option can +Thus an initialization file specified with the \fB\-r\fR option can override both the standard initialization files and previously specified options. But all of these can be overridden by later options. See below for more details about initialization (RC) files. -.TP -.B -silent +.TP +.B \-silent Run commands silently, i.e., with options that reduce the amount of diagnostics generated. For example, with the default settings for -commands under UNIX, the command "latex -interaction=batchmode" is used +commands under UNIX, the command "latex \-interaction=batchmode" is used for latex. Also reduce the number of informational messages that \fIlatexmk\fR generates. -.TP -.B -v, -version +.TP +.B \-v, \-version Print version number of \fILatexmk\fR. -.TP -.B -verbose -Opposite of \fB-silent\fR. This is the default setting. -.TP -.B -view=default, -view=dvi, -view=ps, -view=pdf +.TP +.B \-verbose +Opposite of \fB\-silent\fR. This is the default setting. +.TP +.B \-view=default, \-view=dvi, \-view=ps, \-view=pdf Set the kind of file used when previewing is requested (e.g., by the -\fB-pv\fR or \fB-pvc\fR switches). The default is to view the "highest" +\fB\-pv\fR or \fB\-pvc\fR switches). The default is to view the "highest" kind of requested file (in the order dvi, ps, pdf). -.PP -The preview-continuous option \fB-pvc\fR can only work with one file. +.PP +The preview\-continuous option \fB\-pvc\fR can only work with one file. So in this case you will normally only specify one filename on the command line. -.PP -Options \fB-p\fR, \fB-pv\fR and \fB-pvc\fR are mutually exclusive. So +.PP +Options \fB\-p\fR, \fB\-pv\fR and \fB\-pvc\fR are mutually exclusive. So each of these options turns the others off. -.SH EXAMPLES -.nf +.SH "EXAMPLES" +.nf .ta 2i % \fBlatexmk thesis\fR \fI# run latex enough times to resolve - cross-references\fR + cross\-references\fR -% \fBlatexmk -pvc -ps thesis\fR \fI# run latex enough times to resolve - cross-references, make a postscript +% \fBlatexmk \-pvc \-ps thesis\fR \fI# run latex enough times to resolve + cross\-references, make a postscript file, start a previewer. Then watch for changes in the source file thesis.tex and any files it @@ -443,55 +443,56 @@ encounters an error, latexmk will keep running. -% \fBlatexmk -c\fR \fI# remove .aux, .log, .bbl, .blg, .dep, +% \fBlatexmk \-c\fR \fI# remove .aux, .log, .bbl, .blg, .dep, .dvi, .pdf, .ps & .bbl files\fR -.SH INITIALIZATION (RC) FILES -.PP +.SH "INITIALIZATION (RC) FILES" +.PP There are four initialization files ("RC files") that \fIlatexmk\fR can read at startup: -.PP +.PP 1) The system RC file, if it exists. On a UNIX system, \fIlatexmk\fR searches for following places for its system RC file, in the following order, and reads the first it finds: "/opt/local/share/latexmk/LatexMk", "/usr/local/share/latexmk/LatexMk", "/usr/local/lib/latexmk/LatexMk". - On a MS-WINDOWS system it looks for "C:\\latexmk\\LatexMk". -.PP + On Fedora Core systems, it only looks for "/etc/latexmk.conf". + On a MS\-WINDOWS system it looks for "C:\\latexmk\\LatexMk". +.PP 2) The user's RC file in "$HOME/.latexmkrc", where $HOME is the value of the environment variable HOME. On UNIX and clones (including LINUX), this variable -is set by the system; on MS-Windows, the user may choose to set it. -.PP +is set by the system; on MS\-Windows, the user may choose to set it. +.PP 3) The RC file in the current working directory called "latexmkrc". -.PP -4) Any RC file(s) specified on the command line with the \fB-r\fR option. -.PP +.PP +4) Any RC file(s) specified on the command line with the \fB\-r\fR option. +.PP Each RC file is a sequence of Perl commands. Usually it will be just a -sequence of assignment statements that override the built-in settings of +sequence of assignment statements that override the built\-in settings of \fILatexmk\fR. Comment lines are introduced by the "#" character. Note that command line options are obeyed in the order in which they are written; thus any RC file specified on the command line with -the \fB-r\fR option can override previous options but can be itself +the \fB\-r\fR option can override previous options but can be itself overridden by later options on the command line. -.SH RC VARIABLES IN INITIALIZATION FILES -.PP +.SH "RC VARIABLES IN INITIALIZATION FILES" +.PP Many of the available variables that can be set are shown in the next section. Syntax for the statements in an initialization file is of the form: -.PP +.PP $bibtex = 'bibtex'; -.PP +.PP for the setting of a string variable, -.PP +.PP $preview_mode = 1; -.PP +.PP for the setting of a numeric variable, and -.PP +.PP @default_files = ('paper', 'paper1'); -.PP +.PP for the setting of an array of strings. Some of the variables set the names of the commands that \fIlatexmk\fR @@ -499,37 +500,37 @@ \fB"Detaching" a command\fR: If a command is to be run detached this is indicated by preceding it with "start", as in -.PP +.PP $dvi_previewer = 'start xdvi'; -.PP +.PP This will be translated to whatever is appropriate for your operating system. (Note: in some circumstances, \fIlatex\fR will always run a command detached. This is the case for a previewer in preview continuous mode, since otherwise previewing continuously makes no sense.) -\fBCommand names containing spaces\fR: Under MS-Windows it is common +\fBCommand names containing spaces\fR: Under MS\-Windows it is common that the name of a command includes spaces, since software is often installed in a subdirectory of "C:\Program Files". Such command names should be enclosed in double quotes, as in $lpr_pdf = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p'; -\fBUsing MS-Windows file associations\fR: A useful trick under modern -versions of MS-Windows (e.g., WinXP) is to use just the command +\fBUsing MS\-Windows file associations\fR: A useful trick under modern +versions of MS\-Windows (e.g., WinXP) is to use just the command 'start' by itself: -.PP +.PP $dvi_previewer = 'start'; -.PP -Under recent versions of MS-Windows, this will cause to be run +.PP +Under recent versions of MS\-Windows, this will cause to be run whatever program the system has associated with dvi files. (The same applies for a postscript viewer and a pdf viewer.) \fBNot using a certain command\fR: If a command is not to be run, the command name NONE is used, as in -.PP +.PP $lpr = 'NONE lpr'; -.PP +.PP This means that an appropriate command has not been configured. The string after the 'NONE' is effectively a comment. \fBOptions to commands\fR: @@ -538,9 +539,9 @@ Suppose you want \fIlatexmk\fR to use latex with source specials enabled. Then you might use the following line in an initialization file: -.PP - $latex = 'latex --src-specials'; -.PP +.PP + $latex = 'latex \-\-src\-specials'; +.PP \fBAdvanced tricks\fR: Normally \fIlatexmk\fR assumes certain behavior for commands and in particular it assumes certain kinds and ordering @@ -548,50 +549,50 @@ example you might want to use Distiller to convert postscript files to pdf files. You cannot simply change the name of the ps2pdf conversion program, as in -.PP +.PP $ps2pdf = 'distiller'; ######### WRONG -.PP +.PP because the command line arguments will be wrong. In such a -situation, your best bet is to write a batch file (under MS-Windows) or +situation, your best bet is to write a batch file (under MS\-Windows) or a script (under UNIX) that will do the conversion. Then you set -.PP +.PP $ps2pdf = 'special_script'; -.PP +.PP Your script will be invoked by \fIlatexmk\fR in its usual way as "Special_script file.ps file.pdf". Your script calls Distiller with Distiller's correct arguments. -.SH LIST OF RC VARIABLES IN INITIALIZATION FILES -.PP +.SH "LIST OF RC VARIABLES IN INITIALIZATION FILES" +.PP Default values are indicated in brackets. -.TP +.TP .B $banner [0] If nonzero, the banner message is printed across each page when converting the dvi file to postscript. Without modifying $banner_message, this is -equivalent to specifying the \fB-d\fR option. +equivalent to specifying the \fB\-d\fR option. Note that if \fB$banner\fR is nonzero, the \fB$postscript_mode\fR is assumed and the postscript file is always generated, even if it is newer than the dvi file. -.TP +.TP .B $banner_intensity [0.95] -Equivalent to the \fB-bi\fR option, this is a decimal number between 0 +Equivalent to the \fB\-bi\fR option, this is a decimal number between 0 and 1 that specifies how dark to print the banner message. 0 is black, 1 is white. The default is just right if your toner cartridge isn't running too low. -.TP +.TP .B $banner_message ["DRAFT"] The banner message to print across each page when converting the dvi -file to postscript. This is equivalent to the \fB-bm\fR option. -.TP +file to postscript. This is equivalent to the \fB\-bm\fR option. +.TP .B $banner_scale [220.0] A decimal number that specifies how large the banner message will be printed. Experimentation is necessary to get the right scale for your message, as a rule of thumb the scale should be about equal to 1100 divided by the number of characters in the message. The Default is just right for 5 character messages. This is equivalent to the -\fB-bs\fR option. -.TP +\fB\-bs\fR option. +.TP .B @BIBINPUTS This is an array variable that specifies directories where \fIlatexmk\fR should look for .bib files. By default it is set from @@ -614,13 +615,13 @@ This variable is likely to become obsolete in a future version of \fIlatexmk\fR which uses a better method of searching for files. -.TP +.TP .B $bibtex ["bibtex"] The BibTeX processing program. -.TP -.B $bibtex_silent_switch ["-terse"] +.TP +.B $bibtex_silent_switch ["\-terse"] \fBSwitch(es)\fR for the BibTeX processing program when silent mode is on. -.TP +.TP .B $cleanup_mode [0] If nonzero, specifies cleanup mode: 1 for full cleanup, 2 for cleanup except for dvi, ps and pdf files, 3 for cleanup except for dep and aux @@ -628,21 +629,21 @@ and $clean_full_ext variables.) This variable is equivalent to specifying one of -the \fB-c\fR, \fB-c1\fR, or \fB-C\fR options. But there should be no need +the \fB\-c\fR, \fB\-c1\fR, or \fB\-C\fR options. But there should be no need to set this variable from an RC file. -.TP +.TP .B $clean_ext [""] Extra extensions of files for \fIlatexmk\fR to remove when any of the -clean-up options (\fB-c\fR, \fB-c1\fR, or \fB-C\fR) is selected. -.TP +clean\-up options (\fB\-c\fR, \fB\-c1\fR, or \fB\-C\fR) is selected. +.TP .B $clean_full_ext [""] -Extra extensions of files for \fIlatexmk\fR to remove when the \fB-C\fR +Extra extensions of files for \fIlatexmk\fR to remove when the \fB\-C\fR option is selected, i.e., extensions of files to remove when the .dvi, -etc files are to be cleaned-up. -.TP +etc files are to be cleaned\-up. +.TP .B @cus_dep_list [()] -Custom dependency list -- see section on "Custom Dependencies". -.TP +Custom dependency list \-\- see section on "Custom Dependencies". +.TP .B @default_files [('*.tex')] Default list of files to be processed. @@ -667,30 +668,30 @@ Note that more than file may be given, and that the default extension is '.tex'. Wild cards are allowed. -.TP +.TP .B $dvi_filter [empty] The dvi file filter to be run on the newly produced dvi file before -other processing. Equivalent to specifying the \fB-dF\fR option. -.TP +other processing. Equivalent to specifying the \fB\-dF\fR option. +.TP .B $dvi_previewer ["start xdvi" under UNIX] -The command to invoke a dvi-previewer. -[Default is "start" under MS-WINDOWS; under more recent versions of +The command to invoke a dvi\-previewer. +[Default is "start" under MS\-WINDOWS; under more recent versions of Windows, this will cause to be run whatever command the system has associated with .dvi files.] -.TP +.TP .B $dvi_previewer_landscape ["start xdvi"] -The command to invoke a dvi-previewer in landscape mode. -[Default is "start" under MS-WINDOWS; under more recent versions of +The command to invoke a dvi\-previewer in landscape mode. +[Default is "start" under MS\-WINDOWS; under more recent versions of Windows, this will cause to be run whatever command the system has associated with .dvi files.] -.TP +.TP .B $dvipdf ["dvipdf"] Command to convert dvi to pdf file. WARNING1: The default dvipdf script generates pdf files with bitmapped fonts, which don't look good when viewed by acroread. The script should be modified to give -dvips the options "-P pdf" to ensure that type 1 fonts are used in the +dvips the options "\-P pdf" to ensure that type 1 fonts are used in the pdf file. WARNING 2: If you want to use one of the programs dvipdfm or dvipdfmx @@ -700,24 +701,24 @@ the command line. See the extra_scripts directory of the latexmk distribution, where the necessary scripts dvipdfm_call, etc are to be found, together with instructions for their use in the file README1. -.TP +.TP .B $dvips ["dvips"] The program to used as a filter to convert a .dvi file to a .ps file. If pdf is going to be generated from pdf, then the value of the -$dvips_pdf_switch --- see below --- will be appended. -.TP -.B $dvips_landscape ["dvips -tlandscape"] +$dvips_pdf_switch \-\-\- see below \-\-\- will be appended. +.TP +.B $dvips_landscape ["dvips \-tlandscape"] The program to used as a filter to convert a .dvi file to a .ps file in landscape mode. -.TP -.B $dvips_pdf_switch ["-P pdf"] +.TP +.B $dvips_pdf_switch ["\-P pdf"] \fBSwitch(es)\fR for dvips program when pdf file is to be generated from ps file. -.TP -.B $dvips_silent_switch ["-q"] +.TP +.B $dvips_silent_switch ["\-q"] \fBSwitch(es)\fR for dvips program when silent mode is on. -.TP -.B $dvi_update_method [2 under UNIX, 1 under MS-Windows] +.TP +.B $dvi_update_method [2 under UNIX, 1 under MS\-Windows] How the dvi viewer updates its display when the dvi file has changed. 0 => update is automatic, 1=> manual update by user, which may only mean a mouse click on the @@ -725,35 +726,35 @@ 2 => Send the signal, whose number is in the variable $dvi_update_signal. The default value under UNIX is suitable for xdvi. 3 => Viewer cannot do an update, because it locks the file. (As with -acroread under MS-Windows.) -.TP -.B $dvi_update_signal [Under UNIX: SIGUSR1, which is a system-dependent value] +acroread under MS\-Windows.) +.TP +.B $dvi_update_signal [Under UNIX: SIGUSR1, which is a system\-dependent value] The number of the signal that is sent to the dvi viewer when it is -updated by sending a signal -- see $dvi_update_method. The default +updated by sending a signal \-\- see $dvi_update_method. The default value is the one appropriate for xdvi on a UNIX system. -.TP +.TP .B $force_generate_and_save_includes [0] If nonzero, specifies that the dependency file should always be -generated. Equivalent to specifying the \fB-I\fR option. -.TP +generated. Equivalent to specifying the \fB\-I\fR option. +.TP .B $force_mode [0] If nonzero, continue processing past minor \fIlatex\fR errors including unrecognized cross references. Equivalent to specifying the -\fB-f\fR option. -Note that specifying the \fB-pvc\fR sets $forec_mode to 1. -.TP +\fB\-f\fR option. +Note that specifying the \fB\-pvc\fR sets $forec_mode to 1. +.TP .B $force_include_mode [0] If nonzero, force \fIlatexmk\fR to include files that don't exist when generating dependency files. A warning is produced instead of an error message and the program terminating. If the file name is not an absolute path, it is assumed to be relative to the current working -directory. Equivalent to specifying the \fB-F\fR option. -.TP +directory. Equivalent to specifying the \fB\-F\fR option. +.TP .B $generate_and_save_includes [0] If nonzero, generates dependency file if it does not exist or is older than the root file (the base .tex file). Equivalent to specifying -the \fB-i\fR option. -.TP +the \fB\-i\fR option. +.TP .B @generated_exts [( 'ind', 'lof', 'lot', 'out', 'toc')] This contains a list of extensions for files that are generated (directly or indirectly) during a LaTeX run and that are read in by @@ -761,7 +762,7 @@ from the .log file, it will ignore files with the extensions in \fI@generated_exts\fR, since NORMALLY they are not true source files, and the time stamps of these may mislead \fIlatexmk\fR as to whether -the real output files are up-to-date. +the real output files are up\-to\-date. The extensions "aux" and "bbl" are always excluded from the dependents, because they get special treatment, so they do not need to be in this @@ -775,43 +776,43 @@ adds the extension 'end' to the list of predefined generated extensions. -.TP +.TP .B $go_mode [0] If nonzero, process files regardless of timestamps. Equivalent to the -\fB-g\fR option. -.TP +\fB\-g\fR option. +.TP .B $includes_from_log [1] If nonzero, extract dependency information from the log file, rather than -the source TeX file(s); this is equivalent to the \fB-il\fR option. +the source TeX file(s); this is equivalent to the \fB\-il\fR option. If zero, extract dependency information by scanning the source TeX file(s); -this is equivalent to the \fB-it\fR option. -.TP +this is equivalent to the \fB\-it\fR option. +.TP .B $index_mode [0 and then as determined from the results of a run] If nonzero, run \fImakeindex\fR to produce index of document. Normally you should not need to set this variable in an RC file, since latexmk determines automatically if \fImakeindex\fR needs to be run. -.TP +.TP .B $landscape_mode [0] If nonzero, run in landscape mode, using the landscape mode previewers and -dvi to postscript converters. Equivalent to the \fB-l\fR option. -.TP +dvi to postscript converters. Equivalent to the \fB\-l\fR option. +.TP .B $latex ["latex"] The LaTeX processing program. Note that as with other programs, you can use this variable not just to change the name of the program used, but also specify options to the program. E.g., - $latex = 'latex --src-specials'; -.TP -.B $latex_silent_switch ["-interaction=batchmode"] + $latex = 'latex \-\-src\-specials'; +.TP +.B $latex_silent_switch ["\-interaction=batchmode"] \fBSwitch(es)\fR for the LaTeX processing program when silent mode is on. -Under MS-Windows, the default value is changed to -"-interaction=batchmode -c-style-errors", as used by MikTeX and fpTeX. -.TP +Under MS\-Windows, the default value is changed to +"\-interaction=batchmode \-c\-style\-errors", as used by MikTeX and fpTeX. +.TP .B $lpr ["lpr"] -[Default is "NONE lpr" under MS-WINDOWS.] +[Default is "NONE lpr" under MS\-WINDOWS.] The printing program to print postscript files. -Under MS-Windows (unlike UNIX/LINUX), there is no standard program for +Under MS\-Windows (unlike UNIX/LINUX), there is no standard program for printing files. But there are ways you can do it. For example, if you have gsview installed, you can use it with the option '/p': @@ -822,14 +823,14 @@ is necessary because one part of the command name ('Program Files') contains a space which would otherwise be misinterpreted. -.TP +.TP .B $lpr_dvi ["NONE lpr_dvi"] The printing program to print dvi files. -.TP +.TP .B $lpr_pdf ["NONE lpr_pdf"] The printing program to print pdf files. -Under MS-Windows you could set this to use gsview, if it is installed, +Under MS\-Windows you could set this to use gsview, if it is installed, e.g., $lpr = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p'; @@ -839,18 +840,18 @@ is necessary because one part of the command name ('Program Files') contains a space which would otherwise be misinterpreted. -.TP +.TP .B $makeindex ["makeindex"] The index processing program. -.TP +.TP .B $new_viewer_always [0] This variable applies to \fIlatexmk\fR \fBonly\fR in -continuous-preview mode. If $new_viewer_always is 0, +continuous\-preview mode. If $new_viewer_always is 0, \fIlatexmk\fR will check for a previously running previewer on the same file, and if one is running will not start a new one. If -$new_viewer_always is non-zero, this check will be skipped, and +$new_viewer_always is non\-zero, this check will be skipped, and \fIlatexmk\fR will behave as if no viewer is running. -.TP +.TP .B $pdf_mode [0] If zero, do NOT generate a pdf version of the document. If equal to 1, generate a pdf version of the document using pdflatex. @@ -858,148 +859,148 @@ file, by using the command specified by the $ps2pdf variable. If equal to 3, generate a pdf version of the document from the dvi file, by using the command specified by the $dvipdf variable. -Equivalent to the \fB-pdf-\fR, \fB-pdf\fR, \fB-pdfdvi\fR, -\fB-pdfps\fR options, +Equivalent to the \fB\-pdf\-\fR, \fB\-pdf\fR, \fB\-pdfdvi\fR, +\fB\-pdfps\fR options, and is stored in the dependency file if generated. -.TP +.TP .B $pdflatex ["pdflatex"] The LaTeX processing program in the version that makes a pdf file instead of a dvi file. -.TP -.B $pdflatex_silent_switch ["-interaction=batchmode"] +.TP +.B $pdflatex_silent_switch ["\-interaction=batchmode"] \fBSwitch(es)\fR for the LaTeX processing program when silent mode is on. -Under MS-Windows, the default value is changed to -"-interaction=batchmode -c-style-errors", as used by MikTeX and fpTeX. -.TP +Under MS\-Windows, the default value is changed to +"\-interaction=batchmode \-c\-style\-errors", as used by MikTeX and fpTeX. +.TP .B $pdf_previewer ["start acroread"] -The command to invoke a pdf-previewer. -[Default is changed to "start" on MS-WINDOWS; under more recent versions of +The command to invoke a pdf\-previewer. +[Default is changed to "start" on MS\-WINDOWS; under more recent versions of Windows, this will cause to be run whatever command the system has associated with .pdf files.] -Potential problem under MS-Windows: +Potential problem under MS\-Windows: if acroread is used as the pdf previewer, and it is actually viewing a pdf file, the pdf file cannot be updated. Thus makes acroread a bad choice of previewer if you use \fIlatexmk\fR's -previous-continuous mode (option \fB-pvc\fR) under MS-windows. +previous\-continuous mode (option \fB\-pvc\fR) under MS\-windows. This problem does not occur if ghostview, gv or gsview is used to view pdf files. -.TP -.B $pdf_update_method [1 under UNIX, 3 under MS-Windows] +.TP +.B $pdf_update_method [1 under UNIX, 3 under MS\-Windows] How the pdf viewer updates its display when the pdf file has changed. See $dvi_update_method for the codes. -Note that acroread under MS-Windows (but not UNIX) locks the pdf file, so +Note that acroread under MS\-Windows (but not UNIX) locks the pdf file, so the default value is then 3. -.TP -.B $pdf_update_signal [Under UNIX: SIGHUP, which is a system-dependent value] +.TP +.B $pdf_update_signal [Under UNIX: SIGHUP, which is a system\-dependent value] The number of the signal that is sent to the pdf viewer when it is -updated by sending a signal -- see $pdf_update_method. The default +updated by sending a signal \-\- see $pdf_update_method. The default value is the one appropriate for gv on a UNIX system. -.TP -.B $pid_position = [1 under UNIX, -1 under MS-Windows] +.TP +.B $pid_position = [1 under UNIX, \-1 under MS\-Windows] Command used to get all the processes currently run by the user. -The -pvc option uses the command specified by the variable $pscmd to +The \-pvc option uses the command specified by the variable $pscmd to determine if there is an already running previewer, and to find the process ID (needed if \fIlatexmk\fR needs to signal the previewer about file changes). The variable $pid_position is used to specify which word in lines of the output from $pscmd corresponds to the process ID. The first word in the line is numbered 0. The default value of 1 (2nd word in -line) is correct for Solaris 2.6 and Linux. Setting the variable to -1 is +line) is correct for Solaris 2.6 and Linux. Setting the variable to \-1 is used to indicate that $pscmd is not to be used. -.TP +.TP .B $postscript_mode [0] If nonzero, generate a postscript version of the document. -Equivalent to the \fB-ps\fR option. -.TP +Equivalent to the \fB\-ps\fR option. +.TP .B $preview_continuous_mode [0] If nonzero, run a previewer to view the document, and -continue running \fIlatexmk\fR to keep .dvi up-to-date. Equivalent to -the \fB-pvc\fR option. +continue running \fIlatexmk\fR to keep .dvi up\-to\-date. Equivalent to +the \fB\-pvc\fR option. Which previewer is run depends on the other settings, see the command -line options $\fB-view=\fR. -.TP +line options $\fB\-view=\fR. +.TP .B $preview_mode [0] If nonzero, run a previewer to preview the document. -Equivalent to the \fB-pv\fR option. +Equivalent to the \fB\-pv\fR option. Which previewer is run depends on the other settings, see the command -line options $\fB-view=\fR. -.TP +line options $\fB\-view=\fR. +.TP .B $printout_mode [0] If nonzero, print the document using \fIlpr\fR. Equivalent to the -\fB-p\fR option. Recommend that this is not set from an RC file or +\fB\-p\fR option. Recommend that this is not set from an RC file or you could waste lots of paper. -.TP +.TP .B $print_type = ["ps"] Type of file to printout: possibilities are "dvi", "none", "pdf", or "ps". -.TP +.TP .B $pscmd -[On UNIX, the default is "ps -f -u $ENV{USER}", with changes for Linux -and OS-X. -On MS-WINDOWS the default in "NONE pscmd".] +[On UNIX, the default is "ps \-f \-u $ENV{USER}", with changes for Linux +and OS\-X. +On MS\-WINDOWS the default in "NONE pscmd".] Command used to get all the processes currently run by the user. This -is used by the -pvc option to determine if there is an already running +is used by the \-pvc option to determine if there is an already running previewer. The command line options for this command under the different flavors of UNIX are quite variable. The command given above is suitable for Solaris 2.6 and above, and \fBlatexmk\fR corrects it for Linux and OSX. NOTE: The variable $pid_position must also be set: see its description. -.TP +.TP .B $ps2pdf ["ps2pdf"] Command to convert ps to pdf file. -.TP +.TP .B $ps_filter [empty] The postscript file filter to be run on the newly produced postscript -file before other processing. Equivalent to specifying the \fB-pF\fR +file before other processing. Equivalent to specifying the \fB\-pF\fR option. -.TP -.B $ps_previewer ["start gv -watch"] -The command to invoke a ps-previewer. -[Default is "start" on MS-WINDOWS; under more recent versions of +.TP +.B $ps_previewer ["start gv \-watch"] +The command to invoke a ps\-previewer. +[Default is "start" on MS\-WINDOWS; under more recent versions of Windows, this will cause to be run whatever command the system has associated with .ps files.] -Note that gv with the -watch option updates its display whenever the +Note that gv with the \-watch option updates its display whenever the postscript file changes, whereas ghostview does not. -.TP -.B $ps_previewer_landscape ["start gv -swap -watch"] -The command to invoke a ps-previewer in landscape mode. -[Default is "start" on MS-WINDOWS; under more recent versions of +.TP +.B $ps_previewer_landscape ["start gv \-swap \-watch"] +The command to invoke a ps\-previewer in landscape mode. +[Default is "start" on MS\-WINDOWS; under more recent versions of Windows, this will cause to be run whatever command the system has associated with .ps files.] -.TP -.B $ps_update_method [0 under UNIX, 1 under MS-Windows] +.TP +.B $ps_update_method [0 under UNIX, 1 under MS\-Windows] How the postscript viewer updates its display when the ps file has changed. See $dvi_update_method for the codes. -.TP -.B $ps_update_signal [Under UNIX: SIGHUP, which is a system-dependent value] +.TP +.B $ps_update_signal [Under UNIX: SIGHUP, which is a system\-dependent value] The number of the signal that is sent to the pdf viewer when it is -updated by sending a signal -- see $ps_update_method. The default +updated by sending a signal \-\- see $ps_update_method. The default value is the one appropriate for gv on a UNIX system. -.TP +.TP .B $sleep_time [2] The time to sleep (in seconds) between checking for source file -changes when running the \fB-pvc\fR option. -.TP +changes when running the \fB\-pvc\fR option. +.TP .B $texfile_search [""] This is an obsolete variable, replaced by the \fI@default_files\fR -variable -- see the description of \fI@default_files\fR for how it +variable \-\- see the description of \fI@default_files\fR for how it works. For backward compatibility, if you choose to set it, -\fI$texfile_search\fR is a string of space-separated filenames, and +\fI$texfile_search\fR is a string of space\-separated filenames, and then \fIlatexmk\fR replaces \fI@default_files\fR with the filenames in \fI$texfile_search\fR to which is added '*.tex'. -.TP -.B $tmpdir ["/tmp" under UNIX, value of environment variable TEMP under MS-Windows] +.TP +.B $tmpdir ["/tmp" under UNIX, value of environment variable TEMP under MS\-Windows] Directory to store temporary files that \fIlatexmk\fR generates while running. Currently it only has a minor use, when making a banner to insert in a postscript file. There should be no trailing separator. It should not be necessary to change this value except when running under Cygwin. - +.TP .B @TEXINPUTS This is an array variable that under circumstances specifies directories where \fIlatexmk\fR should look for .tex files. By @@ -1008,58 +1009,58 @@ element list consisting of the current directory is set. The format is as for the @BIBINPUTS variable (qv). -This variable is almost obsolete. It is only used when the \fB-it\fR +This variable is almost obsolete. It is only used when the \fB\-it\fR option is used to force \fIlatexmk\fR to scan the .tex files to find the input files instead of scanning the .log file, which it does by default. Since the .log file contains full path information, you should not need, normally, to set the @TEXINPUTS variable. -.SH CUSTOM DEPENDENCIES -.PP +.SH "CUSTOM DEPENDENCIES" +.PP In any RC file a set of custom dependencies can be set up to convert a file with one extension to a file with another. An example use of this -would be to allow \fIlatexmk\fR to convert a \fI.fig\fR file to +would be to allow \fIlatexmk\fR to convert a \fI.fi g\fR file to \fI.eps\fR to be included in the \fI.tex\fR file. A table of custom dependencies are set up by using the \fB@cus_dep_list\fR array. Each string in the array has four arguments, separated by a space: -.TP +.TP .B from extension: The extension of the file we are converting from (e.g. "fig"). -.TP +.TP .B to extension: The extension of the file we are converting to (e.g. "eps"). -.TP +.TP .B must: -If non-zero, the file we are converting from \fBmust\fR exist, if it +If non\-zero, the file we are converting from \fBmust\fR exist, if it doesn't exist \fIlatexmk\fR will give an error message and exit unless -the \fB-f\fR option is specified. If \fImust\fR is zero and the file +the \fB\-f\fR option is specified. If \fImust\fR is zero and the file we are converting from doesn't exist, then no action is taken. -.TP +.TP .B function: The name of the subroutine that \fIlatexmk\fR should call to perform the file conversion. The first argument to the subroutine is the base name of the file to be converted without any extension. The subroutines are declared in the syntax of \fIperl\fR. The function should return 0 if it was successful and a nonzero number if it failed. -.PP -Example in an RC file to convert a \fI.fig\fR file to a \fI.eps\fR file: +.PP +Example in an RC file to convert a \fI.fi g\fR file to a \fI.eps\fR file: @cus_dep_list = (@cus_dep_list, "fig eps 0 fig2eps"); sub fig2eps { - system("fig2dev -Lps $_[0].fig $_[0].eps"); + system("fig2dev \-Lps $_[0].fi g $_[0].eps"); } -The subroutine \fIfig2eps\fR will only be called if the \fI.fig\fR file +The subroutine \fIfig2eps\fR will only be called if the \fI.fi g\fR file was modified more recently then the \fI.eps\fR file, or the \fI.eps\fR file does not exist. -If the return value of the subroutine is non-zero, then \fIlatexmk\fR +If the return value of the subroutine is non\-zero, then \fIlatexmk\fR will assume an error occurred during the execution of the subroutine. -.SH SEE ALSO +.SH "SEE ALSO" latex(1), bibtex(1). -.SH BUGS +.SH "BUGS" Search for .bib files is not correct if they are not in the current directory; the problem is that the log file generated by bibtex does not give the full path to the .bib files. The easiest fix at the moment is to @@ -1080,27 +1081,27 @@ Gv on UNIX/LINUX works for both postscript and pdf. Ghostview on UNIX/LINUX needs a manual update (reopen); it views postscript and pdf. -Gsview under MS-Windows works for both postscript and pdf, +Gsview under MS\-Windows works for both postscript and pdf, but only reads the updated file when its screen is refreshed. Acroread under UNIX/LINUX views pdf, but the file needs to be closed and reopened to view an updated version. -Under MS-Windows, acroread locks its input file and so the +Under MS\-Windows, acroread locks its input file and so the pdf file cannot be updated. (Remedy: configure \fIlatexmk\fR use gsview instead.) -.SH THANKS TO +.SH "THANKS TO" David Coppit (username david at node coppit.org) made many useful suggestions that contributed to version 3. (Please note that the -e-mail addresses are not written in their standard form to avoid being +e\-mail addresses are not written in their standard form to avoid being harvested by worms and viruses.) -.SH AUTHOR +.SH "AUTHOR" Current version, with substantial modifications, enhancements and bug fixes by John Collins (username collins at node phys.psu.edu). (Version 3.08g). It can be obtained from CTAN: -, and from the +, and from the author's website . -.br +.br Modifications and enhancements by Evan McLean (Version 2.0) -.br +.br Original script called "go" by David J. Musliner (RCS Version 3.2) diff -dur latexmk-3.08n.ORIG/latexmk.pl latexmk-3.08n/latexmk.pl --- latexmk-3.08n.ORIG/latexmk.pl 2007-02-27 11:55:42.000000000 -0700 +++ latexmk-3.08n/latexmk.pl 2007-02-27 11:57:13.000000000 -0700 @@ -804,10 +804,8 @@ ## /usr/local/share, depending on the local conventions. ## /usr/local/lib/latexmk/LatexMk is put in the list for ## compatibility with older versions of latexmk. - @rc_system_files = - ( '/opt/local/share/latexmk/LatexMk', - '/usr/local/share/latexmk/LatexMk', - '/usr/local/lib/latexmk/LatexMk' ); + ## Fedora Core change: only look in /etc + @rc_system_files = ( '/etc/latexmk.conf' ); $search_path_separator = ':'; # Separator of elements in search_path