# This is the system-wide configuration file for latexmk version 4.11. # See the latexmk(1) man page for more information. # # The following options are given their default values. # Uncomment them and change the values if the defaults do not suit your needs. # Allow missing subdirectories of aux_dir to be created as needed # $allow_subdir_creation = 1; # When previewing, whether to make the viewer read from the generated file or # from a temporary copy # $always_view_file_via_temporary = 0; # If nonzero, always analyze .log files for input files in the <...> and (...) # constructions. Otherwise, only do the analysis when fls file doesn't exist # or is out of date. # $analyze_input_log_always = 1; # Whether to read rc files automatically # $auto_rc_use = 1; # Directory for aux files (log, aux, etc.) # $aux_dir = ''; # If nonzero, DVI-to-postscript conversion adds a banner message on each page # $banner = 0; # The darkness of the banner, a number between 0 (black) and 1 (white) # $banner_intensity = 0.95; # The banner message to print across each page if $banner is nonzero # $banner_message = 'DRAFT'; # The size of the banner message (about 1100 divided by the message length) # $banner_scale = 220; # Directories where BibTeX should look for .bib files. # $BIBINPUTS = $ENV('BIBINPUTS') || '.' # The name of the biber executable # $biber = 'biber %O %B'; # The switch that puts biber in silent mode # $biber_silent_switch = '--onlylog'; # The name of the BibTeX executable # $bibtex = 'bibtex %O %B'; # Apply bibtex hack for old versions that don't handle output-directory # $bibtex_fudge = 1; # The switch that puts BibTeX in silent mode # $bibtex_silent_switch = '-terse'; # Whether to run bibtex to update bbl files: 0 means never run bibtex and do # not delete bbl files on cleanup, 1 means run bibtex only if the source files # exist and the bbl files are out of date and do not delete bbl files on # cleanup, 1.5 is the same as 1 but deletes bbl files on cleanup if source # files exist, and 2 means run bibtex whenever the bbl files are out of date # and delete bbl files on cleanup. # $bibtex_use = 1; # Extra file extensions to remove when cleaning # $clean_ext = ""; # Extra file extensions to remove when doing a full clean # $clean_full_ext = ""; # Whether to clean latexmk's file database too # $cleanup_fdb = 0; # Whether cleanup deletes files generated by custom dependencies # $cleanup_includes_cusdep_generated = 0 # Whether cleanup deletes files generated by (pdf)latex, found from \openout # lines in the log file. # $cleanup_includes_generated = 0 # How much cleaning to do: 0 specifies normal operation (no cleaning), # 1 specifies a full cleanup, and 2 specifies a cleanup that leaves dvi, dviF, # pdf, ps, psF, and xdv files. # $cleanup_mode = 0; # Whether to just cleanup, or also generate files # $cleanup_only = 0; # Command to use in pvc mode for compiling # $compiling_cmd = ""; # A custom dependency list; see the man page for details # @cus_dep_list = (); # The default list of files to not be processed; see the man page for details # @default_excluded_files = ( ); # The default list of files to be processed; see the man page for details # @default_files = ('*.tex'); # Whether to display lists of dependencies # $dependents_list = 0; # Whether lists of dependencies include phony targets # $dependents_phony = 0; # File for dependency list output. Default is stdout. # $deps_file = '-'; # Whether to get diagnostic output from latexmk # $diagnostics = 0; # Whether to change to the directory of the source file # $do_cd = 0; # The DVI file filter to be run on newly produced DVI files # $dvi_filter = ''; # Always make a DVI file # $dvi_mode = 0; # The command to start a DVI previewer # $dvi_previewer = 'start xdvi %O %S'; $dvi_previewer = 'xdg-open %O %S'; # The command to start a DVI previewer in landscape mode # $dvi_previewer_landscape = 'start xdvi -paper usr %O %S'; $dvi_previewer_landscape = 'xdg-open %O %S'; # The command to run when the DVI viewer is set to be updated by a command # $dvi_update_command = ''; # How to make the DVI viewer update its display when the DVI file changes. # See the man page for a description of each method. # $dvi_update_method = 2; $dvi_update_method = 1; # When DVI update method 2 is used, the number of the Unix signal to send # $dvi_update_signal = $signo{USR1} # The command to convert a DVI file into a PDF file. # See the warnings on the man page # $dvipdf = 'dvipdf %O %S %D'; # Command line switch for dvipdf to make it run in silent mode # $dvipdf_silent_switch = '-q'; # The command to convert a DVI file into a PostScript file # $dvips = 'dvips %O -o %D %S'; # The command to convert a DVI file into a PostScript file in landscape mode # $dvips_landscape = 'dvips -tlandscape %O -o %D %S'; # Command line switch for dvips when a PDF file is to be generated # $dvips_pdf_switch = '-P pdf'; # Command line switch for dvips to make it run in silent mode # $dvips_silent_switch = '-q'; # Which treatment of default extension and filenames with multiple extensions # is used. The possibilities are: # - miktex_old, for MikTeX version 1.20d or earlier # - unix, for web2c 7.3.1 or later # $extension_treatment = 'unix'; # Command to use in pvc mode for failures # $failure_cmd = ""; # The extension of the file which latexmk generates to contain a database # of information on source files. # $fdb_ext = 'fdb_latexmk'; # Version number for kind of fdb_file # $fdb_ver = 3; # If nonzero, continue processing past minor LaTeX errors # This option is made nonzero if the -pvc command line option is used. # $force_mode = 0; # The list of extensions for files that are generated in one run and consumed # by later runs of one of the LaTeX tools. The 'aux' and 'bbl' extensions are # treated specially. # @generated_exts = ( 'aux', 'bcf', 'fls', 'idx', 'ind', 'lof', 'lot', 'out', 'toc' ); # 1 = process files regardless of timestamps # 2 = do a full cleanup first # $go_mode = 0; # The basename of generated files # $jobname = ""; # The command to search for tex-related files # $kpsewhich = 'kpsewhich %S'; # Show calls to and results from kpsewhich # $kpsewhich_show = 0; # If nonzero, run in landscape mode; otherwise in portrait mode # $landscape_mode = 0; # The name of the LaTeX program # $latex = 'latex %O %S'; # Default switches to pass to the LaTeX program # $latex_default_switches = ''; # The command line switch to make LaTeX run in silent mode # $latex_silent_switch = '-interaction=batchmode'; # Whether to treat log files as binary (1) or text (0). This is normally only # necessary on Windows platforms with MikTeX, where some control characters are # embedded in the log file. # $log_file_binary = 0 # The program that prints PostScript files # $lpr = 'lpr %O %S'; # The program that prints DVI files # $lpr_dvi = 'NONE $lpr_dvi variable is not configured to allow printing of dvi files'; # The program that prints PDF files # $lpr_pdf = 'NONE $lpr_pdf variable is not configured to allow printing of pdf files'; # The name of the LUALaTeX program # $lualatex = 'lualatex %O %S'; # Default switches to pass to the lualatex program # $lualatex_default_switches = ''; # The command line switch to make lualatex run in silent mode # $lualatex_silent_switch = '-interaction=batchmode'; # Command to run make # $make = 'make'; # The name of the makeindex program # $makeindex = 'makeindex %O -o %D %S'; # The command line switch to make makeindex run in silent mode # $makeindex_silent_switch = '-q'; # The maximum number of times latex will be invoked in an effort to fix up # references. # $max_repeat = 5; # Set to 1 to give special treatment to Ctrl-c and Ctrl-Break in -pvc mode on # Windows. This is unnecessary on Unix platforms. $MSWin_fudge_break = 0; # This variable is used only when running in continuous-preview mode. If zero, # check for a previously running previewer on the same file and update it. If # nonzero, always start a new previewer. # $new_viewer_always = 0; # Directory for output files # $out_dir = ''; # 0 = do not create a PDF file # 1 = Create a PDF file with pdflatex # 2 = Create a PDF file with ps2pdf # 3 = Create a PDF file with dvipdf # 4 = Create a PDF file with lualatex # 5 = Create a PDF file with xelatex + xdvipdfmx # $pdf_mode = 0; # The command to invoke a PDF previewer # $pdf_previewer = 'start acroread %O %S'; $pdf_previewer = 'xdg-open %O %S'; # The command to run when the PDF viewer is set to be updated by a command # $pdf_update_command = ''; # How to make the PDF viewer update its display when the PDF file changes. # See the man page for a description of each method. # $pdf_update_method = 1; # When PDF update method 2 is used, the number of the Unix signal to send # $pdf_update_signal = $signo{HUP} # The name of the LaTeX program that produces PDF files by default # $pdflatex = 'pdflatex %O %S'; # Default switches to pass to the pdflatex program # $pdflatex_default_switches = ''; # The command line switch to make pdflatex run in silent mode # $pdflatex_silent_switch = '-interaction=batchmode'; # Where the pid is in the output of $pscmd; see the man page # $pid_position = 1; # Always make a PostScript file # $postscript_mode = 0; # If nonzero, run a previewer to view the document and keep the DVI file up # to date # $preview_continuous_mode = 0; # If nonzero, run a previewer to preview the document # $preview_mode = 0; # The type of file to printout: 'auto', 'dvi', 'none', 'pdf', or 'ps' # $print_type = 'auto'; # If nonzero, print the document using lpr each time it is created # $printout_mode = 0; # Filter to run on newly created PostScript files # $ps_filter = ''; # The command to invoke a PostScript previewer # $ps_previewer = 'start gv %O %S'; $ps_previewer = 'xdg-open %O %S'; # The command to invoke a PostScript previewer in landscape mode # $ps_previewer_landscape = 'start gv -swap %O %S'; $ps_previewer_landscape = 'xdg-open %O %S'; # The command to run when the PostScript viewer is set to be updated by a # command # $ps_update_command = ''; # How to make the PostScript viewer update its display when the PostScript # file changes. See the man page for a description of each method. # $ps_update_method = 0; $ps_update_method = 1; # When PostScript update method 2 is used, the number of the Unix signal to # send # $ps_update_signal = $signo{HUP} # Command to convert a PostScript file to a PDF file # $ps2pdf = 'ps2pdf %O %S %D'; # Command used to list all the processes currently run by the user # $pscmd = "ps -f -u $ENV{USER}"; # When previewing in -pvc mode, whether to make the viewer read from the # generated file or from a temporary copy # $pvc_view_file_via_temporary = 1; # Quote filenames in external commands. This is essential for filenames # containing spaces. # $quote_filenames = 1; # Whether to use the recorder option on (pdf)latex # $recorder = 1; # Whether to display lists of dependencies. # $rules_list = 0; # The character that separates paths in a list of paths # $search_path_separator = ':'; # Whether to display timing information # $show_time = 0; # Whether to suppress latex messages # $silent = 0; # Whether to suppress a summary of warnings in the log file # $silence_logfile_warnings = 0; # The time to sleep in seconds between checking for source file changes when # running in continuous update mode # $sleep_time = 2; # Command to use in pvc mode for success # $success_cmd = ""; # Space-separated list of extra files to search for when no files are specified # on the command line and the @default_files list is empty. Wildcards are # allowed. These files are in addition to *.tex in the current directory. # $texfile_search = ""; # Directories where BibTeX should look for .bib files. # $TEXINPUTS = $ENV('TEXINPUTS') || '.' # The directory to store temporary files; omit the trailing '/' # $tmpdir = $ENV{TMPDIR} || '/tmp'; # Whether to use make to try to create missing files # $use_make_for_missing_files = 0; # Which kind of file is to be previewed if a previewer is used. The possible # values are 'default', 'dvi', 'ps', 'pdf', and 'none'. The value of 'default' # means that the PDF is viewed if it is generated, else PostScript is viewed if # it is generated, else DVI is viewed. # $view = 'default'; # Nonzero to treat warnings as errors and exit with nonzero exit status # $warning_as_errors = 0; # Command to use in pvc mode for warnings # $warning_cmd = ""; # The command to convert an XDV file into a PDF file. # $xdvipdfmx = 'xdvipdfmx -o %D %O %S'; # Command line switch for xdvipdfmx to make it run in silent mode # $xdvipdfmx_silent_switch = '-q'; # The name of the LaTeX program that produces XDV files by default # $xelatex = 'xelatex -no-pdf %O %S'; # Default switches to pass to the xelatex program # $xelatex_default_switches = ''; # The command line switch to make xelatex run in silent mode # $xelatex_silent_switch = '-interaction=batchmode';