# Prefix that is used for patches
%global pkg_name %{name}
%global pkgnamepatch mariadb
# Regression tests may take a long time (many cores recommended), skip them by
# passing --nocheck to rpmbuild or by setting runselftest to 0 if defining
# --nocheck is not possible (e.g. in koji build)
%{!?runselftest:%global runselftest 1}
# Set this to 1 to see which tests fail
%global check_testsuite 0
# In f20+ use unversioned docdirs, otherwise the old versioned one
%global _pkgdocdirname %{pkg_name}%{!?_pkgdocdir:-%{version}}
%{!?_pkgdocdir: %global _pkgdocdir %{_docdir}/%{pkg_name}-%{version}}
# Use Full RELRO for all binaries (RHBZ#1092548)
%global _hardened_build 1
# By default, patch(1) creates backup files when chunks apply with offsets.
# Turn that off to ensure such files don't get included in RPMs (cf bz#884755).
%global _default_patch_flags --no-backup-if-mismatch
# TokuDB engine is now part of MariaDB, but it is available only for x86_64;
# variable tokudb allows to build with TokuDB storage engine
# Temporarily disabled in F21+ for https://mariadb.atlassian.net/browse/MDEV-6446
%ifarch x86_64
%bcond_without tokudb
%else
%bcond_with tokudb
%endif
# Mroonga engine is now part of MariaDB, but it only builds for x86_64;
# variable mroonga allows to build with Mroonga storage engine
%ifarch x86_64 i686
%bcond_without mroonga
%else
%bcond_with mroonga
%endif
# The Open Query GRAPH engine (OQGRAPH) is a computation engine allowing
# hierarchies and more complex graph structures to be handled in a relational
# fashion; enabled by default
%bcond_without oqgraph
# For some use cases we do not need some parts of the package
%bcond_without clibrary
%bcond_without embedded
%bcond_without devel
%bcond_without client
%bcond_without common
%bcond_without errmsg
%bcond_without bench
%bcond_without test
%bcond_without connect
# When there is already another package that ships /etc/my.cnf,
# rather include it than ship the file again, since conflicts between
# those files may create issues
%bcond_without config
# For deep debugging we need to build binaries with extra debug info
%bcond_with debug
# Include files for SysV init or systemd
%if 0%{?fedora} >= 15 || 0%{?rhel} >= 7
%bcond_without init_systemd
%bcond_with init_sysv
%global daemon_name %{name}
%global daemondir %{_unitdir}
%global daemon_no_prefix %{pkg_name}
%global mysqld_pid_dir mysqld
%else
%bcond_with init_systemd
%bcond_without init_sysv
%global daemon_name mysqld
%global daemondir %{_sysconfdir}/rc.d/init.d
%global daemon_no_prefix mysqld
%endif
# MariaDB 10.0 and later requires pcre >= 8.35, otherwise we need to use
# the bundled library, since the package cannot be build with older version
%if 0%{?fedora} >= 21
%bcond_without pcre
%else
%bcond_with pcre
%endif
# We define some system's well known locations here so we can use them easily
# later when building to another location (like SCL)
%global logrotateddir %{_sysconfdir}/logrotate.d
%global logfiledir %{_localstatedir}/log/%{daemon_name}
%global logfile %{logfiledir}/%{daemon_name}.log
# Directory for storing pid file
%global pidfiledir %{_localstatedir}/run/%{daemon_name}
# Defining where database data live
%global dbdatadir %{_localstatedir}/lib/mysql
# Home directory of mysql user should be same for all packages that create it
%global mysqluserhome /var/lib/mysql
# The evr of mysql we want to obsolete
%global obsoleted_mysql_evr 5.6-0
%global obsoleted_mysql_case_evr 5.5.30-5
# Provide mysql names for compatibility
%bcond_without mysql_names
%bcond_without conflicts
# Make long macros shorter
%global sameevr %{epoch}:%{version}-%{release}
%global compatver 10.0
%global bugfixver 24
Name: mariadb
Version: %{compatver}.%{bugfixver}
Release: 1%{?with_debug:.debug}%{?dist}
Epoch: 1
Summary: A community developed branch of MySQL
Group: Applications/Databases
URL: http://mariadb.org
# Exceptions allow client libraries to be linked with most open source SW,
# not only GPL code. See README.mysql-license
License: GPLv2 with exceptions and LGPLv2 and BSD
Source0: http://mirrors.syringanetworks.net/mariadb/mariadb-%{version}/source/mariadb-%{version}.tar.gz
Source2: mysql_config_multilib.sh
Source3: my.cnf.in
Source4: my_config.h
Source5: README.mysql-cnf
Source6: README.mysql-docs
Source7: README.mysql-license
Source9: mysql-embedded-check.c
Source10: mysql.tmpfiles.d.in
Source11: mysql.service.in
Source12: mysql-prepare-db-dir.sh
Source13: mysql-wait-ready.sh
Source14: mysql-check-socket.sh
Source15: mysql-scripts-common.sh
Source16: mysql-check-upgrade.sh
Source17: mysql-wait-stop.sh
Source19: mysql.init.in
Source50: rh-skipped-tests-base.list
Source51: rh-skipped-tests-arm.list
Source52: rh-skipped-tests-ppc-s390.list
# Comments for these patches are in the patch files
# Patches common for more mysql-like packages
Patch1: %{pkgnamepatch}-strmov.patch
Patch2: %{pkgnamepatch}-install-test.patch
Patch3: %{pkgnamepatch}-s390-tsc.patch
Patch4: %{pkgnamepatch}-logrotate.patch
Patch5: %{pkgnamepatch}-file-contents.patch
Patch7: %{pkgnamepatch}-scripts.patch
Patch8: %{pkgnamepatch}-install-db-sharedir.patch
Patch9: %{pkgnamepatch}-ownsetup.patch
Patch12: %{pkgnamepatch}-admincrash.patch
# Patches specific for this mysql package
Patch30: %{pkgnamepatch}-errno.patch
Patch31: %{pkgnamepatch}-string-overflow.patch
Patch32: %{pkgnamepatch}-basedir.patch
Patch34: %{pkgnamepatch}-covscan-stroverflow.patch
Patch36: %{pkgnamepatch}-ssltest.patch
Patch37: %{pkgnamepatch}-notestdb.patch
BuildRequires: cmake
BuildRequires: libaio-devel
BuildRequires: openssl-devel
BuildRequires: ncurses-devel
BuildRequires: perl
BuildRequires: systemtap-sdt-devel
BuildRequires: zlib-devel
# auth_pam.so plugin will be build if pam-devel is installed
BuildRequires: pam-devel
%{?with_pcre:BuildRequires: pcre-devel >= 8.35}
# Tests requires time and ps and some perl modules
BuildRequires: procps
BuildRequires: time
BuildRequires: perl(Env)
BuildRequires: perl(Exporter)
BuildRequires: perl(Fcntl)
BuildRequires: perl(File::Temp)
BuildRequires: perl(Data::Dumper)
BuildRequires: perl(Getopt::Long)
BuildRequires: perl(IPC::Open3)
BuildRequires: perl(Memoize)
BuildRequires: perl(Socket)
BuildRequires: perl(Sys::Hostname)
BuildRequires: perl(Test::More)
BuildRequires: perl(Time::HiRes)
# for running some openssl tests rhbz#1189180
BuildRequires: openssl
%{?with_init_systemd:BuildRequires: systemd}
Requires: bash
Requires: fileutils
Requires: grep
Requires: %{name}-common%{?_isa} = %{sameevr}
%if %{with mysql_names}
Provides: mysql = %{sameevr}
Provides: mysql%{?_isa} = %{sameevr}
Provides: mysql-compat-client = %{sameevr}
Provides: mysql-compat-client%{?_isa} = %{sameevr}
%endif
# MySQL (with caps) is upstream's spelling of their own RPMs for mysql
%{?obsoleted_mysql_case_evr:Obsoletes: MySQL < %{obsoleted_mysql_case_evr}}
%{?obsoleted_mysql_evr:Obsoletes: mysql < %{obsoleted_mysql_evr}}
%{?with_conflicts:Conflicts: community-mysql}
# Filtering: https://fedoraproject.org/wiki/Packaging:AutoProvidesAndRequiresFiltering
%if 0%{?fedora} > 14 || 0%{?rhel} > 6
%global __requires_exclude ^perl\\((hostnames|lib::mtr|lib::v1|mtr_|My::)
%global __provides_exclude_from ^(%{_datadir}/(mysql|mysql-test)/.*|%{_libdir}/mysql/plugin/.*\\.so)$
%else
%filter_from_requires /perl(\(hostnames\|lib::mtr\|lib::v1\|mtr_\|My::\)/d
%filter_provides_in -P (%{_datadir}/(mysql|mysql-test)/.*|%{_libdir}/mysql/plugin/.*\.so)
%filter_setup
%endif
%description
MariaDB is a community developed branch of MySQL.
MariaDB is a multi-user, multi-threaded SQL database server.
It is a client/server implementation consisting of a server daemon (mysqld)
and many different client programs and libraries. The base package
contains the standard MariaDB/MySQL client programs and generic MySQL files.
%if %{with clibrary}
%package libs
Summary: The shared libraries required for MariaDB/MySQL clients
Group: Applications/Databases
Requires: %{name}-common%{?_isa} = %{sameevr}
%if %{with mysql_names}
Provides: mysql-libs = %{sameevr}
Provides: mysql-libs%{?_isa} = %{sameevr}
%endif
%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-libs < %{obsoleted_mysql_case_evr}}
%{?obsoleted_mysql_evr:Obsoletes: mysql-libs < %{obsoleted_mysql_evr}}
%description libs
The mariadb-libs package provides the essential shared libraries for any
MariaDB/MySQL client program or interface. You will need to install this
package to use any other MariaDB package or any clients that need to connect
to a MariaDB/MySQL server. MariaDB is a community developed branch of MySQL.
%endif
%if %{with config}
%package config
Summary: The config files required by server and client
Group: Applications/Databases
%description config
The package provides the config file my.cnf and my.cnf.d directory used by any
MariaDB or MySQL program. You will need to install this package to use any
other MariaDB or MySQL package if the config files are not provided in the
package itself.
%endif
%if %{with common}
%package common
Summary: The shared files required by server and client
Group: Applications/Databases
Requires: %{_sysconfdir}/my.cnf
%description common
The package provides the essential shared files for any MariaDB program.
You will need to install this package to use any other MariaDB package.
%endif
%if %{with errmsg}
%package errmsg
Summary: The error messages files required by server and embedded
Group: Applications/Databases
Requires: %{name}-common%{?_isa} = %{sameevr}
%description errmsg
The package provides error messages files for the MariaDB daemon and the
embedded server. You will need to install this package to use any of those
MariaDB packages.
%endif
%package server
Summary: The MariaDB server and related files
Group: Applications/Databases
# note: no version here = %%{version}-%%{release}
%if %{with mysql_names}
Requires: mysql-compat-client%{?_isa}
Requires: mysql%{?_isa}
%else
Requires: %{name}%{?_isa}
%endif
Requires: %{name}-common%{?_isa} = %{sameevr}
Requires: %{_sysconfdir}/my.cnf
Requires: %{_sysconfdir}/my.cnf.d
Requires: %{name}-errmsg%{?_isa} = %{sameevr}
Requires: sh-utils
Requires(pre): /usr/sbin/useradd
%if %{with init_systemd}
# We require this to be present for %%{_tmpfilesdir}
Requires: systemd
# Make sure it's there when scriptlets run, too
Requires(pre): systemd
Requires(posttrans): systemd
%{?systemd_requires: %systemd_requires}
%endif
# mysqlhotcopy needs DBI/DBD support
Requires: perl(DBI)
Requires: perl(DBD::mysql)
%if %{with mysql_names}
Provides: mysql-server = %{sameevr}
Provides: mysql-server%{?_isa} = %{sameevr}
Provides: mysql-compat-server = %{sameevr}
Provides: mysql-compat-server%{?_isa} = %{sameevr}
%endif
%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-server < %{obsoleted_mysql_case_evr}}
%{?with_conflicts:Conflicts: community-mysql-server}
%{?with_conflicts:Conflicts: mariadb-galera-server}
%{?obsoleted_mysql_evr:Obsoletes: mysql-server < %{obsoleted_mysql_evr}}
%description server
MariaDB is a multi-user, multi-threaded SQL database server. It is a
client/server implementation consisting of a server daemon (mysqld)
and many different client programs and libraries. This package contains
the MariaDB server and some accompanying files and directories.
MariaDB is a community developed branch of MySQL.
%if %{with oqgraph}
%package oqgraph-engine
Summary: The Open Query GRAPH engine for MariaDB
Group: Applications/Databases
Requires: %{name}-server%{?_isa} = %{sameevr}
# boost and Judy required for oograph
BuildRequires: boost-devel
BuildRequires: Judy-devel
%description oqgraph-engine
The package provides Open Query GRAPH engine (OQGRAPH) as plugin for MariaDB
database server. OQGRAPH is a computation engine allowing hierarchies and more
complex graph structures to be handled in a relational fashion. In a nutshell,
tree structures and friend-of-a-friend style searches can now be done using
standard SQL syntax, and results joined onto other tables.
%endif
%if %{with connect}
%package connect-engine
Summary: The CONNECT storage engine for MariaDB
Group: Applications/Databases
Requires: %{name}-server%{?_isa} = %{sameevr}
%description connect-engine
The CONNECT storage engine enables MariaDB to access external local or
remote data (MED). This is done by defining tables based on different data
types, in particular files in various formats, data extracted from other DBMS
or products (such as Excel), or data retrieved from the environment
(for example DIR, WMI, and MAC tables).
%endif
%if %{with devel}
%package devel
Summary: Files for development of MariaDB/MySQL applications
Group: Applications/Databases
%{?with_clibrary:Requires: %{name}-libs%{?_isa} = %{sameevr}}
Requires: openssl-devel%{?_isa}
%if %{with mysql_names}
Provides: mysql-devel = %{sameevr}
Provides: mysql-devel%{?_isa} = %{sameevr}
%endif
%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-devel < %{obsoleted_mysql_case_evr}}
%{?obsoleted_mysql_evr:Obsoletes: mysql-devel < %{obsoleted_mysql_evr}}
%{?with_conflicts:Conflicts: community-mysql-devel}
%description devel
MariaDB is a multi-user, multi-threaded SQL database server. This
package contains the libraries and header files that are needed for
developing MariaDB/MySQL client applications.
MariaDB is a community developed branch of MySQL.
%endif
%if %{with embedded}
%package embedded
Summary: MariaDB as an embeddable library
Group: Applications/Databases
Requires: %{name}-common%{?_isa} = %{sameevr}
Requires: %{name}-errmsg%{?_isa} = %{sameevr}
%if %{with mysql_names}
Provides: mysql-embedded = %{sameevr}
Provides: mysql-embedded%{?_isa} = %{sameevr}
%endif
%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-embedded < %{obsoleted_mysql_case_evr}}
%{?obsoleted_mysql_evr:Obsoletes: mysql-embedded < %{obsoleted_mysql_evr}}
%description embedded
MariaDB is a multi-user, multi-threaded SQL database server. This
package contains a version of the MariaDB server that can be embedded
into a client application instead of running as a separate process.
MariaDB is a community developed branch of MySQL.
%package embedded-devel
Summary: Development files for MariaDB as an embeddable library
Group: Applications/Databases
Requires: %{name}-embedded%{?_isa} = %{sameevr}
Requires: %{name}-devel%{?_isa} = %{sameevr}
%if %{with mysql_names}
Provides: mysql-embedded-devel = %{sameevr}
Provides: mysql-embedded-devel%{?_isa} = %{sameevr}
%endif
%{?with_conflicts:Conflicts: community-mysql-embedded-devel}
%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-embedded-devel < %{obsoleted_mysql_case_evr}}
%{?obsoleted_mysql_evr:Obsoletes: mysql-embedded-devel < %{obsoleted_mysql_evr}}
%description embedded-devel
MariaDB is a multi-user, multi-threaded SQL database server. This
package contains files needed for developing and testing with
the embedded version of the MariaDB server.
MariaDB is a community developed branch of MySQL.
%endif
%if %{with bench}
%package bench
Summary: MariaDB benchmark scripts and data
Group: Applications/Databases
Requires: %{name}%{?_isa} = %{sameevr}
%if %{with mysql_names}
Provides: mysql-bench = %{sameevr}
Provides: mysql-bench%{?_isa} = %{sameevr}
%endif
%{?with_conflicts:Conflicts: community-mysql-bench}
%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-bench < %{obsoleted_mysql_case_evr}}
%{?obsoleted_mysql_evr:Obsoletes: mysql-bench < %{obsoleted_mysql_evr}}
%description bench
MariaDB is a multi-user, multi-threaded SQL database server. This
package contains benchmark scripts and data for use when benchmarking
MariaDB.
MariaDB is a community developed branch of MySQL.
%endif
%if %{with test}
%package test
Summary: The test suite distributed with MariaD
Group: Applications/Databases
Requires: %{name}%{?_isa} = %{sameevr}
Requires: %{name}-common%{?_isa} = %{sameevr}
Requires: %{name}-server%{?_isa} = %{sameevr}
Requires: perl(Env)
Requires: perl(Exporter)
Requires: perl(Fcntl)
Requires: perl(File::Temp)
Requires: perl(Data::Dumper)
Requires: perl(Getopt::Long)
Requires: perl(IPC::Open3)
Requires: perl(Socket)
Requires: perl(Sys::Hostname)
Requires: perl(Test::More)
Requires: perl(Time::HiRes)
%{?with_conflicts:Conflicts: community-mysql-test}
%if %{with mysql_names}
Provides: mysql-test = %{sameevr}
Provides: mysql-test%{?_isa} = %{sameevr}
%endif
%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-test < %{obsoleted_mysql_case_evr}}
%{?obsoleted_mysql_evr:Obsoletes: mysql-test < %{obsoleted_mysql_evr}}
%description test
MariaDB is a multi-user, multi-threaded SQL database server. This
package contains the regression test suite distributed with
the MariaDB sources.
MariaDB is a community developed branch of MySQL.
%endif
%prep
%setup -q -n mariadb-%{version}
%patch1 -p1
%patch2 -p1
%patch3 -p1
%patch4 -p1
%patch5 -p1
%patch7 -p1
%patch8 -p1
%patch9 -p1
%patch12 -p1
%patch30 -p1
%patch31 -p1
%patch32 -p1
%patch34 -p1
%patch36 -p1
%patch37 -p1
# removing bundled cmd-line-utils is now disabled
# we cannot use libedit due #1201988
# rm -r cmd-line-utils
sed -i -e 's/2.8.7/2.6.4/g' cmake/cpack_rpm.cmake
# workaround for upstream bug #56342
rm -f mysql-test/t/ssl_8k_key-master.opt
# generate a list of tests that fail, but are not disabled by upstream
cat %{SOURCE50} | tee mysql-test/rh-skipped-tests.list
# disable some tests failing on different architectures
%ifarch %{arm} aarch64
cat %{SOURCE51} | tee -a mysql-test/rh-skipped-tests.list
%endif
%ifarch ppc ppc64 ppc64p7 s390 s390x
cat %{SOURCE52} | tee -a mysql-test/rh-skipped-tests.list
%endif
cp %{SOURCE2} %{SOURCE3} %{SOURCE10} %{SOURCE11} %{SOURCE12} %{SOURCE13} \
%{SOURCE14} %{SOURCE15} %{SOURCE16} %{SOURCE17} %{SOURCE19} \
scripts
%build
# fail quickly and obviously if user tries to build as root
%if %runselftest
if [ x"$(id -u)" = "x0" ]; then
echo "mysql's regression tests fail if run as root."
echo "If you really need to build the RPM as root, use"
echo "--nocheck to skip the regression tests."
exit 1
fi
%endif
CFLAGS="%{optflags} -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE"
# force PIC mode so that we can build libmysqld.so
CFLAGS="$CFLAGS -fPIC"
# GCC 4.9 causes segfaults: https://mariadb.atlassian.net/browse/MDEV-6360
CFLAGS="$CFLAGS -fno-delete-null-pointer-checks"
# gcc seems to have some bugs on sparc as of 4.4.1, back off optimization
# submitted as bz #529298
%ifarch sparc sparcv9 sparc64
CFLAGS=`echo $CFLAGS| sed -e "s|-O2|-O1|g" `
%endif
# significant performance gains can be achieved by compiling with -O3 optimization
# rhbz#1051069
%ifarch ppc64
CFLAGS=`echo $CFLAGS| sed -e "s|-O2|-O3|g" `
%endif
CXXFLAGS="$CFLAGS"
export CFLAGS CXXFLAGS
%if 0%{?_hardened_build}
# building with PIE
LDFLAGS="$LDFLAGS -pie -Wl,-z,relro,-z,now"
export LDFLAGS
%endif
# The INSTALL_xxx macros have to be specified relative to CMAKE_INSTALL_PREFIX
# so we can't use %%{_datadir} and so forth here.
%cmake . \
-DBUILD_CONFIG=mysql_release \
-DFEATURE_SET="community" \
-DWITH_READLINE=ON \
-DINSTALL_LAYOUT=RPM \
-DDAEMON_NAME="%{daemon_name}" \
-DDAEMON_NO_PREFIX="%{daemon_no_prefix}" \
-DLOG_LOCATION="%{logfile}" \
-DPID_FILE_DIR="%{pidfiledir}" \
-DNICE_PROJECT_NAME="MariaDB" \
-DRPM="%{?rhel:rhel%{rhel}}%{!?rhel:fedora%{fedora}}" \
-DCMAKE_INSTALL_PREFIX="%{_prefix}" \
-DINSTALL_SYSCONFDIR="%{_sysconfdir}" \
-DINSTALL_SYSCONF2DIR="%{_sysconfdir}/my.cnf.d" \
-DINSTALL_DOCDIR="share/doc/%{_pkgdocdirname}" \
-DINSTALL_DOCREADMEDIR="share/doc/%{_pkgdocdirname}" \
-DINSTALL_INCLUDEDIR=include/mysql \
-DINSTALL_INFODIR=share/info \
-DINSTALL_LIBDIR="%{_lib}/mysql" \
-DINSTALL_MANDIR=share/man \
-DINSTALL_MYSQLSHAREDIR=share/%{pkg_name} \
-DINSTALL_MYSQLTESTDIR=share/mysql-test \
-DINSTALL_PLUGINDIR="%{_lib}/mysql/plugin" \
-DINSTALL_SBINDIR=libexec \
-DINSTALL_SCRIPTDIR=bin \
-DINSTALL_SQLBENCHDIR=share \
-DINSTALL_SUPPORTFILESDIR=share/%{pkg_name} \
-DMYSQL_DATADIR="%{dbdatadir}" \
-DMYSQL_UNIX_ADDR="/var/lib/mysql/mysql.sock" \
-DENABLED_LOCAL_INFILE=ON \
-DENABLE_DTRACE=ON \
-DWITH_EMBEDDED_SERVER=ON \
-DWITH_SSL=system \
-DWITH_ZLIB=system \
%{?with_pcre: -DWITH_PCRE=system}\
-DWITH_JEMALLOC=no \
%{!?with_tokudb: -DWITHOUT_TOKUDB=ON}\
%{!?with_mroonga: -DWITHOUT_MROONGA=ON}\
-DTMPDIR=/var/tmp \
%{?with_debug: -DCMAKE_BUILD_TYPE=Debug}\
%{?_hardened_build:-DWITH_MYSQLD_LDFLAGS="-pie -Wl,-z,relro,-z,now"}
make %{?_smp_mflags} VERBOSE=1
# debuginfo extraction scripts fail to find source files in their real
# location -- satisfy them by copying these files into location, which
# is expected by scripts
for e in innobase xtradb ; do
for f in pars0grm.y pars0lex.l ; do
cp -p "storage/$e/pars/$f" "storage/$e/$f"
done
done
%install
make DESTDIR=%{buildroot} install
# cmake generates some completely wacko references to -lprobes_mysql when
# building with dtrace support. Haven't found where to shut that off,
# so resort to this blunt instrument. While at it, let's not reference
# libmysqlclient_r anymore either.
sed -e 's/-lprobes_mysql//' -e 's/-lmysqlclient_r/-lmysqlclient/' \
%{buildroot}%{_bindir}/mysql_config >mysql_config.tmp
cp -p -f mysql_config.tmp %{buildroot}%{_bindir}/mysql_config
chmod 755 %{buildroot}%{_bindir}/mysql_config
# multilib header support
# we only apply this to known Red Hat multilib arches, per bug #181335
unamei=$(uname -i)
%ifarch %{arm}
unamei=arm
%endif
%ifarch %{power64}
unamei=ppc64
%endif
%ifarch %{arm} aarch64 %{ix86} x86_64 ppc %{power64} %{sparc} s390 s390x
mv %{buildroot}%{_includedir}/mysql/my_config.h %{buildroot}%{_includedir}/mysql/my_config_${unamei}.h
mv %{buildroot}%{_includedir}/mysql/private/config.h %{buildroot}%{_includedir}/mysql/private/my_config_${unamei}.h
install -p -m 644 %{SOURCE4} %{buildroot}%{_includedir}/mysql/
install -p -m 644 %{SOURCE4} %{buildroot}%{_includedir}/mysql/private/config.h
mv %{buildroot}%{_bindir}/mysql_config %{buildroot}%{_bindir}/mysql_config-%{__isa_bits}
install -p -m 0755 scripts/mysql_config_multilib %{buildroot}%{_bindir}/mysql_config
%endif
# install INFO_SRC, INFO_BIN into libdir (upstream thinks these are doc files,
# but that's pretty wacko --- see also %%{name}-file-contents.patch)
install -p -m 644 Docs/INFO_SRC %{buildroot}%{_libdir}/mysql/
install -p -m 644 Docs/INFO_BIN %{buildroot}%{_libdir}/mysql/
rm -rf %{buildroot}%{_pkgdocdir}/MariaDB-server-%{version}/
mkdir -p %{buildroot}%{logfiledir}
chmod 0750 %{buildroot}%{logfiledir}
touch %{buildroot}%{logfile}
# current setting in my.cnf is to use /var/run/mariadb for creating pid file,
# however since my.cnf is not updated by RPM if changed, we need to create mysqld
# as well because users can have odd settings in their /etc/my.cnf
mkdir -p %{buildroot}%{pidfiledir}
install -p -m 0755 -d %{buildroot}%{dbdatadir}
%if %{with config}
install -D -p -m 0644 scripts/my.cnf %{buildroot}%{_sysconfdir}/my.cnf
%else
rm -f %{buildroot}%{_sysconfdir}/my.cnf.d/mysql-clients.cnf
rm -f %{buildroot}%{_sysconfdir}/my.cnf
%endif
# use different config file name for each variant of server
mv %{buildroot}%{_sysconfdir}/my.cnf.d/server.cnf %{buildroot}%{_sysconfdir}/my.cnf.d/%{pkg_name}-server.cnf
# install systemd unit files and scripts for handling server startup
%if %{with init_systemd}
install -D -p -m 644 scripts/mysql.service %{buildroot}%{_unitdir}/%{daemon_name}.service
install -D -p -m 0644 scripts/mysql.tmpfiles.d %{buildroot}%{_tmpfilesdir}/%{name}.conf
%if 0%{?mysqld_pid_dir:1}
echo "d %{_localstatedir}/run/%{mysqld_pid_dir} 0755 mysql mysql -" >>%{buildroot}%{_tmpfilesdir}/%{name}.conf
%endif
%endif
# install SysV init script
%if %{with init_sysv}
install -D -p -m 755 scripts/mysql.init %{buildroot}%{daemondir}/%{daemon_name}
%endif
# helper scripts for service starting
install -p -m 755 scripts/mysql-prepare-db-dir %{buildroot}%{_libexecdir}/mysql-prepare-db-dir
install -p -m 755 scripts/mysql-wait-ready %{buildroot}%{_libexecdir}/mysql-wait-ready
install -p -m 755 scripts/mysql-wait-stop %{buildroot}%{_libexecdir}/mysql-wait-stop
install -p -m 755 scripts/mysql-check-socket %{buildroot}%{_libexecdir}/mysql-check-socket
install -p -m 755 scripts/mysql-check-upgrade %{buildroot}%{_libexecdir}/mysql-check-upgrade
install -p -m 644 scripts/mysql-scripts-common %{buildroot}%{_libexecdir}/mysql-scripts-common
# Remove libmysqld.a
rm -f %{buildroot}%{_libdir}/mysql/libmysqld.a
# libmysqlclient_r is no more. Upstream tries to replace it with symlinks
# but that really doesn't work (wrong soname in particular). We'll keep
# just the devel libmysqlclient_r.so link, so that rebuilding without any
# source change is enough to get rid of dependency on libmysqlclient_r.
rm -f %{buildroot}%{_libdir}/mysql/libmysqlclient_r.so*
ln -s libmysqlclient.so %{buildroot}%{_libdir}/mysql/libmysqlclient_r.so
# mysql-test includes one executable that doesn't belong under /usr/share,
# so move it and provide a symlink
mv %{buildroot}%{_datadir}/mysql-test/lib/My/SafeProcess/my_safe_process %{buildroot}%{_bindir}
ln -s ../../../../../bin/my_safe_process %{buildroot}%{_datadir}/mysql-test/lib/My/SafeProcess/my_safe_process
# should move this to /etc/ ?
rm -f %{buildroot}%{_bindir}/mysql_embedded
rm -f %{buildroot}%{_libdir}/mysql/*.a
rm -f %{buildroot}%{_datadir}/%{pkg_name}/binary-configure
rm -f %{buildroot}%{_datadir}/%{pkg_name}/magic
rm -f %{buildroot}%{_datadir}/%{pkg_name}/ndb-config-2-node.ini
rm -f %{buildroot}%{_datadir}/%{pkg_name}/mysql.server
rm -f %{buildroot}%{_datadir}/%{pkg_name}/mysqld_multi.server
rm -f %{buildroot}%{_mandir}/man1/mysql-stress-test.pl.1*
rm -f %{buildroot}%{_mandir}/man1/mysql-test-run.pl.1*
rm -f %{buildroot}%{_bindir}/mytop
# put logrotate script where it needs to be
mkdir -p %{buildroot}%{logrotateddir}
mv %{buildroot}%{_datadir}/%{pkg_name}/mysql-log-rotate %{buildroot}%{logrotateddir}/%{daemon_name}
chmod 644 %{buildroot}%{logrotateddir}/%{daemon_name}
mkdir -p %{buildroot}%{_sysconfdir}/ld.so.conf.d
echo "%{_libdir}/mysql" > %{buildroot}%{_sysconfdir}/ld.so.conf.d/%{name}-%{_arch}.conf
# copy additional docs into build tree so %%doc will find them
install -p -m 0644 %{SOURCE5} %{basename:%{SOURCE5}}
install -p -m 0644 %{SOURCE6} %{basename:%{SOURCE6}}
install -p -m 0644 %{SOURCE7} %{basename:%{SOURCE7}}
install -p -m 0644 %{SOURCE16} %{basename:%{SOURCE16}}
# install the list of skipped tests to be available for user runs
install -p -m 0644 mysql-test/rh-skipped-tests.list %{buildroot}%{_datadir}/mysql-test
# remove unneeded RHEL-4 SELinux stuff
rm -rf %{buildroot}%{_datadir}/%{pkg_name}/SELinux/
# remove SysV init script
rm -f %{buildroot}%{_sysconfdir}/init.d/mysql
# remove duplicate logrotate script
rm -f %{buildroot}%{_sysconfdir}/logrotate.d/mysql
# remove solaris files
rm -rf %{buildroot}%{_datadir}/%{pkg_name}/solaris/
%if %{without clibrary}
unlink %{buildroot}%{_libdir}/mysql/libmysqlclient.so
unlink %{buildroot}%{_libdir}/mysql/libmysqlclient_r.so
rm -rf %{buildroot}%{_libdir}/mysql/libmysqlclient*.so.*
rm -rf %{buildroot}%{_sysconfdir}/ld.so.conf.d
rm -f %{buildroot}%{_sysconfdir}/my.cnf.d/client.cnf
%endif
%if %{without embedded}
rm -f %{buildroot}%{_libdir}/mysql/libmysqld.so*
rm -f %{buildroot}%{_bindir}/{mysql_client_test_embedded,mysqltest_embedded}
rm -f %{buildroot}%{_mandir}/man1/{mysql_client_test_embedded,mysqltest_embedded}.1*
%endif
%if %{without devel}
rm -f %{buildroot}%{_bindir}/mysql_config*
rm -rf %{buildroot}%{_includedir}/mysql
rm -f %{buildroot}%{_datadir}/aclocal/mysql.m4
rm -f %{buildroot}%{_libdir}/mysql/libmysqlclient*.so
rm -f %{buildroot}%{_mandir}/man1/mysql_config.1*
%endif
%if %{without client}
rm -f %{buildroot}%{_bindir}/{msql2mysql,mysql,mysql_find_rows,\
mysql_plugin,mysql_waitpid,mysqlaccess,mysqladmin,mysqlbinlog,mysqlcheck,\
mysqldump,mysqlimport,mysqlshow,mysqlslap,my_print_defaults}
rm -f %{buildroot}%{_mandir}/man1/{msql2mysql,mysql,mysql_find_rows,\
mysql_plugin,mysql_waitpid,mysqlaccess,mysqladmin,mysqlbinlog,mysqlcheck,\
mysqldump,mysqlimport,mysqlshow,mysqlslap,my_print_defaults}.1*
%endif
%if %{without connect}
rm -f %{buildroot}%{_sysconfdir}/my.cnf.d/connect.cnf
%endif
%if %{without config}
rm -f %{buildroot}%{_sysconfdir}/my.cnf
rm -f %{buildroot}%{_sysconfdir}/my.cnf.d/mysql-clients.cnf
%endif
%if %{without common}
rm -rf %{buildroot}%{_datadir}/%{pkg_name}/charsets
%endif
%if %{without errmsg}
rm -f %{buildroot}%{_datadir}/%{pkg_name}/errmsg-utf8.txt
rm -rf %{buildroot}%{_datadir}/%{pkg_name}/{english,czech,danish,dutch,estonian,\
french,german,greek,hungarian,italian,japanese,korean,norwegian,norwegian-ny,\
polish,portuguese,romanian,russian,serbian,slovak,spanish,swedish,ukrainian}
%endif
%if %{without bench}
rm -rf %{buildroot}%{_datadir}/sql-bench
%endif
%if %{without test}
rm -f %{buildroot}%{_bindir}/{mysql_client_test,my_safe_process}
rm -rf %{buildroot}%{_datadir}/mysql-test
rm -f %{buildroot}%{_mandir}/man1/mysql_client_test.1*
%endif
%check
%if %{with test}
%if %runselftest
make test VERBOSE=1
# hack to let 32- and 64-bit tests run concurrently on same build machine
export MTR_PARALLEL=1
# builds might happen at the same host, avoid collision
export MTR_BUILD_THREAD=%{__isa_bits}
# The cmake build scripts don't provide any simple way to control the
# options for mysql-test-run, so ignore the make target and just call it
# manually. Nonstandard options chosen are:
# --force to continue tests after a failure
# no retries please
# test SSL with --ssl
# skip tests that are listed in rh-skipped-tests.list
# avoid redundant test runs with --binlog-format=mixed
# increase timeouts to prevent unwanted failures during mass rebuilds
(
set -e
cd mysql-test
perl ./mysql-test-run.pl --force --retry=0 --ssl \
%if ! %{check_testsuite}
--skip-test-list=rh-skipped-tests.list \
%endif
--suite-timeout=720 --testcase-timeout=30 \
--mysqld=--binlog-format=mixed --force-restart \
--shutdown-timeout=60 --max-test-fail=0
# cmake build scripts will install the var cruft if left alone :-(
rm -rf var
)
%endif
%endif
%pre server
/usr/sbin/groupadd -g 27 -o -r mysql >/dev/null 2>&1 || :
/usr/sbin/useradd -M -N -g mysql -o -r -d %{mysqluserhome} -s /sbin/nologin \
-c "MySQL Server" -u 27 mysql >/dev/null 2>&1 || :
%if %{with clibrary}
%post libs -p /sbin/ldconfig
%endif
%if %{with embedded}
%post embedded -p /sbin/ldconfig
%endif
%post server
%if %{with init_systemd}
%systemd_post %{daemon_name}.service
%endif
%if %{with init_sysv}
if [ $1 = 1 ]; then
/sbin/chkconfig --add %{daemon_name}
fi
%endif
%preun server
%if %{with init_systemd}
%systemd_preun %{daemon_name}.service
%endif
%if %{with init_sysv}
if [ $1 = 0 ]; then
/sbin/service %{daemon_name} stop >/dev/null 2>&1
/sbin/chkconfig --del %{daemon_name}
fi
%endif
%if %{with clibrary}
%postun libs -p /sbin/ldconfig
%endif
%if %{with embedded}
%postun embedded -p /sbin/ldconfig
%endif
%postun server
%if %{with init_systemd}
%systemd_postun_with_restart %{daemon_name}.service
%endif
%if %{with init_sysv}
if [ $1 -ge 1 ]; then
/sbin/service %{daemon_name} condrestart >/dev/null 2>&1 || :
fi
%endif
%if %{with client}
%files
%{_bindir}/msql2mysql
%{_bindir}/mysql
%{_bindir}/mysql_find_rows
%{_bindir}/mysql_plugin
%{_bindir}/mysql_waitpid
%{_bindir}/mysqlaccess
%{_bindir}/mysqladmin
%{_bindir}/mysqlbinlog
%{_bindir}/mysqlcheck
%{_bindir}/mysqldump
%{_bindir}/mysqlimport
%{_bindir}/mysqlshow
%{_bindir}/mysqlslap
%{_bindir}/my_print_defaults
%{_mandir}/man1/msql2mysql.1*
%{_mandir}/man1/mysql.1*
%{_mandir}/man1/mysql_find_rows.1*
%{_mandir}/man1/mysql_plugin.1*
%{_mandir}/man1/mysql_waitpid.1*
%{_mandir}/man1/mysqlaccess.1*
%{_mandir}/man1/mysqladmin.1*
%{_mandir}/man1/mysqlbinlog.1*
%{_mandir}/man1/mysqlcheck.1*
%{_mandir}/man1/mysqldump.1*
%{_mandir}/man1/mysqlimport.1*
%{_mandir}/man1/mysqlshow.1*
%{_mandir}/man1/mysqlslap.1*
%{_mandir}/man1/my_print_defaults.1*
%endif
%if %{with clibrary}
%files libs
%{_libdir}/mysql/libmysqlclient.so.*
%{_sysconfdir}/ld.so.conf.d/*
%config(noreplace) %{_sysconfdir}/my.cnf.d/client.cnf
%endif
%if %{with config}
%files config
# although the default my.cnf contains only server settings, we put it in the
# common package because it can be used for client settings too.
%dir %{_sysconfdir}/my.cnf.d
%config(noreplace) %{_sysconfdir}/my.cnf
%config(noreplace) %{_sysconfdir}/my.cnf.d/mysql-clients.cnf
%endif
%if %{with common}
%files common
%doc README COPYING COPYING.LESSER README.mysql-license README.mysql-docs
%doc storage/innobase/COPYING.Percona storage/innobase/COPYING.Google
%dir %{_libdir}/mysql
%dir %{_libdir}/mysql/plugin
%dir %{_datadir}/%{pkg_name}
%{_libdir}/mysql/plugin/dialog.so
%{_libdir}/mysql/plugin/mysql_clear_password.so
%{_datadir}/%{pkg_name}/charsets
%endif
%if %{with errmsg}
%files errmsg
%{_datadir}/%{pkg_name}/errmsg-utf8.txt
%{_datadir}/%{pkg_name}/english
%lang(cs) %{_datadir}/%{pkg_name}/czech
%lang(da) %{_datadir}/%{pkg_name}/danish
%lang(nl) %{_datadir}/%{pkg_name}/dutch
%lang(et) %{_datadir}/%{pkg_name}/estonian
%lang(fr) %{_datadir}/%{pkg_name}/french
%lang(de) %{_datadir}/%{pkg_name}/german
%lang(el) %{_datadir}/%{pkg_name}/greek
%lang(hu) %{_datadir}/%{pkg_name}/hungarian
%lang(it) %{_datadir}/%{pkg_name}/italian
%lang(ja) %{_datadir}/%{pkg_name}/japanese
%lang(ko) %{_datadir}/%{pkg_name}/korean
%lang(no) %{_datadir}/%{pkg_name}/norwegian
%lang(no) %{_datadir}/%{pkg_name}/norwegian-ny
%lang(pl) %{_datadir}/%{pkg_name}/polish
%lang(pt) %{_datadir}/%{pkg_name}/portuguese
%lang(ro) %{_datadir}/%{pkg_name}/romanian
%lang(ru) %{_datadir}/%{pkg_name}/russian
%lang(sr) %{_datadir}/%{pkg_name}/serbian
%lang(sk) %{_datadir}/%{pkg_name}/slovak
%lang(es) %{_datadir}/%{pkg_name}/spanish
%lang(sv) %{_datadir}/%{pkg_name}/swedish
%lang(uk) %{_datadir}/%{pkg_name}/ukrainian
%endif
%files server
%doc README.mysql-cnf
%{_bindir}/aria_chk
%{_bindir}/aria_dump_log
%{_bindir}/aria_ftdump
%{_bindir}/aria_pack
%{_bindir}/aria_read_log
%{_bindir}/myisamchk
%{_bindir}/myisam_ftdump
%{_bindir}/myisamlog
%{_bindir}/myisampack
%{_bindir}/mysql_convert_table_format
%{_bindir}/mysql_fix_extensions
%{_bindir}/mysql_install_db
%{_bindir}/mysql_secure_installation
%{_bindir}/mysql_setpermission
%{_bindir}/mysql_tzinfo_to_sql
%{_bindir}/mysql_upgrade
%{_bindir}/mysql_zap
%{_bindir}/mysqlbug
%{_bindir}/mysqldumpslow
%{_bindir}/mysqld_multi
%{_bindir}/mysqld_safe
%{_bindir}/mysqlhotcopy
%{_bindir}/mysqltest
%{_bindir}/innochecksum
%{_bindir}/perror
%{_bindir}/replace
%{_bindir}/resolve_stack_dump
%{_bindir}/resolveip
%{?with_tokudb:%{_bindir}/tokuftdump}
%{?with_tokudb:%{_bindir}/tokuft_logprint}
%config(noreplace) %{_sysconfdir}/my.cnf.d/%{pkg_name}-server.cnf
%{?with_tokudb:%config(noreplace) %{_sysconfdir}/my.cnf.d/tokudb.cnf}
%{_libexecdir}/mysqld
%{_libdir}/mysql/INFO_SRC
%{_libdir}/mysql/INFO_BIN
%if %{without common}
%dir %{_datadir}/%{pkg_name}
%endif
%{_libdir}/mysql/plugin/*
%{?with_oqgraph:%exclude %{_libdir}/mysql/plugin/ha_oqgraph.so}
%{?with_connect:%exclude %{_libdir}/mysql/plugin/ha_connect.so}
%exclude %{_libdir}/mysql/plugin/dialog.so
%exclude %{_libdir}/mysql/plugin/mysql_clear_password.so
%{_mandir}/man1/aria_chk.1*
%{_mandir}/man1/aria_dump_log.1*
%{_mandir}/man1/aria_ftdump.1*
%{_mandir}/man1/aria_pack.1*
%{_mandir}/man1/aria_read_log.1*
%{_mandir}/man1/myisamchk.1*
%{_mandir}/man1/myisamlog.1*
%{_mandir}/man1/myisampack.1*
%{_mandir}/man1/mysql_convert_table_format.1*
%{_mandir}/man1/myisam_ftdump.1*
%{_mandir}/man1/mysql.server.1*
%{_mandir}/man1/mysql_fix_extensions.1*
%{_mandir}/man1/mysql_install_db.1*
%{_mandir}/man1/mysql_secure_installation.1*
%{_mandir}/man1/mysql_upgrade.1*
%{_mandir}/man1/mysql_zap.1*
%{_mandir}/man1/mysqlbug.1*
%{_mandir}/man1/mysqldumpslow.1*
%{_mandir}/man1/mysqld_multi.1*
%{_mandir}/man1/mysqld_safe.1*
%{_mandir}/man1/mysqlhotcopy.1*
%{_mandir}/man1/mysql_setpermission.1*
%{_mandir}/man1/mysqltest.1*
%{_mandir}/man1/innochecksum.1*
%{_mandir}/man1/perror.1*
%{_mandir}/man1/replace.1*
%{_mandir}/man1/resolve_stack_dump.1*
%{_mandir}/man1/resolveip.1*
%{_mandir}/man1/mysql_tzinfo_to_sql.1*
%{_mandir}/man8/mysqld.8*
%{_datadir}/%{pkg_name}/fill_help_tables.sql
%{_datadir}/%{pkg_name}/install_spider.sql
%{_datadir}/%{pkg_name}/mysql_system_tables.sql
%{_datadir}/%{pkg_name}/mysql_system_tables_data.sql
%{_datadir}/%{pkg_name}/mysql_test_data_timezone.sql
%{_datadir}/%{pkg_name}/mysql_performance_tables.sql
%{?with_mroonga:%{_datadir}/%{pkg_name}/mroonga/install.sql}
%{?with_mroonga:%{_datadir}/%{pkg_name}/mroonga/uninstall.sql}
%{_datadir}/%{pkg_name}/my-*.cnf
%{daemondir}/%{daemon_name}*
%{_libexecdir}/mysql-prepare-db-dir
%{_libexecdir}/mysql-wait-ready
%{_libexecdir}/mysql-wait-stop
%{_libexecdir}/mysql-check-socket
%{_libexecdir}/mysql-check-upgrade
%{_libexecdir}/mysql-scripts-common
%{?with_init_systemd:%{_tmpfilesdir}/%{name}.conf}
%attr(0755,mysql,mysql) %dir %{pidfiledir}
%attr(0755,mysql,mysql) %dir %{dbdatadir}
%attr(0750,mysql,mysql) %dir %{logfiledir}
%attr(0640,mysql,mysql) %config %ghost %verify(not md5 size mtime) %{logfile}
%config(noreplace) %{logrotateddir}/%{daemon_name}
%if %{with oqgraph}
%files oqgraph-engine
%config(noreplace) %{_sysconfdir}/my.cnf.d/oqgraph.cnf
%{_libdir}/mysql/plugin/ha_oqgraph.so
%endif
%if %{with connect}
%files connect-engine
%config(noreplace) %{_sysconfdir}/my.cnf.d/connect.cnf
%{_libdir}/mysql/plugin/ha_connect.so
%endif
%if %{with devel}
%files devel
%{_bindir}/mysql_config
%{_bindir}/mysql_config-%{__isa_bits}
%{_includedir}/mysql
%{_datadir}/aclocal/mysql.m4
%if %{with clibrary}
%{_libdir}/mysql/libmysqlclient.so
%{_libdir}/mysql/libmysqlclient_r.so
%endif
%{_mandir}/man1/mysql_config.1*
%endif
%if %{with embedded}
%files embedded
%{_libdir}/mysql/libmysqld.so.*
%files embedded-devel
%{_libdir}/mysql/libmysqld.so
%{_bindir}/mysql_client_test_embedded
%{_bindir}/mysqltest_embedded
%{_mandir}/man1/mysql_client_test_embedded.1*
%{_mandir}/man1/mysqltest_embedded.1*
%endif
%if %{with bench}
%files bench
%{_datadir}/sql-bench
%endif
%if %{with test}
%files test
%{_bindir}/mysql_client_test
%{_bindir}/my_safe_process
%attr(-,mysql,mysql) %{_datadir}/mysql-test
%{_mandir}/man1/mysql_client_test.1*
%endif
%changelog
* Fri Apr 22 2016 Honza Horak <hhorak@redhat.com> - 1:10.0.24-1
- Rebase to 10.0.24
* Thu Feb 04 2016 Honza Horak <hhorak@redhat.com> - 1:10.0.23-1
- Update to 10.0.23
* Mon Aug 10 2015 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.21-1
- Update to 10.0.21
* Wed Jul 29 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:10.0.20-3
- Rebuilt for https://fedoraproject.org/wiki/Changes/F23Boost159
* Wed Jul 22 2015 David Tardon <dtardon@redhat.com> - 1:10.0.20-2
- rebuild for Boost 1.58
* Tue Jun 23 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.20-1
- Update to 10.0.20
* Wed Jun 17 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:10.0.19-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
* Wed Jun 03 2015 Dan Horák <dan[at]danny.cz> - 1:10.0.19-2
- Update lists of failing tests (jdornak)
Related: #1149647
* Mon May 11 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.19-1
- Update to 10.0.19
* Thu May 07 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.18-1
- Update to 10.0.18
* Thu May 07 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-4
- Include client plugins into -common package since they are used by both -libs
and base packages.
- Do not use libedit
Related: #1201988
- Let plugin dir to be owned by -common
- Use correct comment in the init script
Related: #1184604
- Add openssl as BuildRequires to run some openssl tests during build
Related: #1189180
- Fail in case any command in check fails
Related: #1124791
- Fix mysqladmin crash if run with -u root -p
Resolves: #1207170
* Sat May 02 2015 Kalev Lember <kalevlember@gmail.com> - 1:10.0.17-3
- Rebuilt for GCC 5 C++11 ABI change
* Fri Mar 06 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-2
- Wait for daemon ends
Resolves: #1072958
- Do not include symlink to libmysqlclient if not shipping the library
- Do not use scl prefix more than once in paths
Based on https://www.redhat.com/archives/sclorg/2015-February/msg00038.html
* Wed Mar 04 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-1
- Rebase to version 10.0.17
- Added variable for turn off skipping some tests
* Tue Mar 03 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.16-6
- Check permissions when starting service on RHEL-6
Resolves: #1194699
- Do not create test database by default
Related: #1194611
* Fri Feb 13 2015 Matej Muzila <mmuzila@redhat.com> - 1:10.0.16-4
- Enable tokudb
* Tue Feb 10 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.16-3
- Fix openssl_1 test
* Wed Feb 4 2015 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.16-2
- Include new certificate for tests
- Update lists of failing tests
Related: #1186110
* Tue Feb 3 2015 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.16-9
- Rebase to version 10.0.16
Resolves: #1187895
* Tue Jan 27 2015 Petr Machata <pmachata@redhat.com> - 1:10.0.15-9
- Rebuild for boost 1.57.0
* Mon Jan 26 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-8
- Fix typo in the config file
* Sun Jan 25 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-7
- Do not create log file in post script
* Sat Jan 24 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-6
- Move server settings to config file under my.cnf.d dir
* Sat Jan 24 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-5
- Fix path for sysconfig file
Filter provides in el6 properly
Fix initscript file location
* Tue Jan 06 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-4
- Disable failing tests connect.mrr, connect.updelx2 on ppc and s390
* Mon Dec 22 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.15-3
- Fix macros paths in my.cnf
- Create old location for pid file if it remained in my.cnf
* Fri Dec 05 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.15-2
- Rework usage of macros and remove some compatibility artefacts
* Thu Nov 27 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.15-1
- Update to 10.0.15
* Thu Nov 20 2014 Jan Stanek <jstanek@redhat.com> - 1:10.0.14-8
- Applied upstream fix for mysql_config --cflags output.
Resolves: #1160845
* Fri Oct 24 2014 Jan Stanek <jstanek@redhat.com> - 1:10.0.14-7
- Fixed compat service file.
Resolves: #1155700
* Mon Oct 13 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-6
- Remove bundled cmd-line-utils
Related: #1079637
- Move mysqlimport man page to proper package
- Disable main.key_cache test on s390
Releated: #1149647
* Wed Oct 08 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-5
- Disable tests connect.part_file, connect.part_table
and connect.updelx
Related: #1149647
* Wed Oct 01 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-4
- Add bcond_without mysql_names
Use more correct path when deleting mysql logrotate script
* Wed Oct 01 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-3
- Build with system libedit
Resolves: #1079637
* Mon Sep 29 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-2
- Add with_debug option
* Mon Sep 29 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-1
- Update to 10.0.14
* Wed Sep 24 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-8
- Move connect engine to a separate package
Rename oqgraph engine to align with upstream packages
- Move some files to correspond with MariaDB upstream packages
client.cnf into -libs, mysql_plugin and msql2mysql into base,
tokuftdump and aria_* into -server, errmsg-utf8.txt into -errmsg
- Remove duplicate cnf files packaged using %%doc
- Check upgrade script added to warn about need for mysql_upgrade
* Wed Sep 24 2014 Matej Muzila <mmuzila@redhat.com> - 1:10.0.13-7
- Client related libraries moved from mariadb-server to mariadb-libs
Related: #1138843
* Mon Sep 08 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-6
- Disable vcol_supported_sql_funcs_myisam test on all arches
Related: #1096787
- Install systemd service file on RHEL-7+
Server requires any mysql package, so it should be fine with older client
* Thu Sep 04 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-5
- Fix paths in mysql_install_db script
Resolves: #1134328
- Use %%cmake macro
* Tue Aug 19 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-4
- Build config subpackage everytime
- Disable failing tests: innodb_simulate_comp_failures_small, key_cache
rhbz#1096787
* Sun Aug 17 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:10.0.13-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
* Thu Aug 14 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-2
- Include mysqld_unit only if required; enable tokudb in f20-
* Wed Aug 13 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-1
- Rebase to version 10.0.13
* Tue Aug 12 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-8
- Introduce -config subpackage and ship base config files here
* Tue Aug 5 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-7
- Adopt changes from mysql, thanks Bjorn Munch <bjorn.munch@oracle.com>
* Mon Jul 28 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-6
- Use explicit sysconfdir
- Absolut path for default value for pid file and error log
* Tue Jul 22 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-5
- Hardcoded paths removed to work fine in chroot
- Spec rewrite to be more similar to oterh MySQL implementations
- Use variable for daemon unit name
- Include SysV init script if built on older system
- Add possibility to not ship some sub-packages
* Mon Jul 21 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-4
- Reformating spec and removing unnecessary snippets
* Tue Jul 15 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-3
- Enable OQGRAPH engine and package it as a sub-package
- Add support for TokuDB engine for x86_64 (currently still disabled)
- Re-enable tokudb_innodb_xa_crash again, seems to be fixed now
- Drop superfluous -libs and -embedded ldconfig deps (thanks Ville Skyttä)
- Separate -lib and -common sub-packages
- Require /etc/my.cnf instead of shipping it
- Include README.mysql-cnf
- Multilib support re-worked
- Introduce new option with_mysqld_unit
- Removed obsolete mysql-cluster, the package should already be removed
- Improve error message when log file is not writable
- Compile all binaries with full RELRO (RHBZ#1092548)
- Use modern symbol filtering with compatible backup
- Add more groupnames for server's my.cnf
- Error messages now provided by a separate package (thanks Alexander Barkov)
- Expand paths in helper scripts using cmake
* Wed Jun 18 2014 Mikko Tiihonen <mikko.tiihonen@iki.fi> - 1:10.0.12-2
- Use -fno-delete-null-pointer-checks to avoid segfaults with gcc 4.9
* Tue Jun 17 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.12-1
- Rebase to version 10.0.12
* Sat Jun 07 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:10.0.11-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
* Tue Jun 3 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.11-4
- rebuild with tests failing on different arches disabled (#1096787)
* Thu May 29 2014 Dan Horák <dan[at]danny.cz> - 1:10.0.11-2
- rebuild with tests failing on big endian arches disabled (#1096787)
* Wed May 14 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.11-1
- Rebase to version 10.0.11
* Mon May 05 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.10-3
- Script for socket check enhanced
* Thu Apr 10 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.10-2
- use system pcre library
* Thu Apr 10 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.10-1
- Rebase to version 10.0.10
* Wed Mar 12 2014 Honza Horak <hhorak@redhat.com> - 1:5.5.36-2
- Server crashes on SQL select containing more group by and left join statements using innodb tables
Resolves: #1065676
- Fix paths in helper scripts
- Move language files into mariadb directory
* Thu Mar 06 2014 Honza Horak <hhorak@redhat.com> - 1:5.5.36-1
- Rebase to 5.5.36
https://kb.askmonty.org/en/mariadb-5536-changelog/
* Tue Feb 25 2014 Honza Horak <hhorak@redhat.com> 1:5.5.35-5
- Daemon helper scripts sanity changes and spec files clean-up
* Tue Feb 11 2014 Honza Horak <hhorak@redhat.com> 1:5.5.35-4
- Fix typo in mysqld.service
Resolves: #1063981
* Wed Feb 5 2014 Honza Horak <hhorak@redhat.com> 1:5.5.35-3
- Do not touch the log file in post script, so it does not get wrong owner
Resolves: #1061045
* Thu Jan 30 2014 Honza Horak <hhorak@redhat.com> 1:5.5.35-1
- Rebase to 5.5.35
https://kb.askmonty.org/en/mariadb-5535-changelog/
Also fixes: CVE-2014-0001, CVE-2014-0412, CVE-2014-0437, CVE-2013-5908,
CVE-2014-0420, CVE-2014-0393, CVE-2013-5891, CVE-2014-0386, CVE-2014-0401,
CVE-2014-0402
Resolves: #1054043
Resolves: #1059546
* Tue Jan 14 2014 Honza Horak <hhorak@redhat.com> - 1:5.5.34-9
- Adopt compatible system versioning
Related: #1045013
- Use compatibility mysqld.service instead of link
Related: #1014311
* Mon Jan 13 2014 Rex Dieter <rdieter@fedoraproject.org> 1:5.5.34-8
- move mysql_config alternatives scriptlets to -devel too
* Fri Jan 10 2014 Honza Horak <hhorak@redhat.com> 1:5.5.34-7
- Build with -O3 on ppc64
Related: #1051069
- Move mysql_config to -devel sub-package and remove Require: mariadb
Related: #1050920
* Fri Jan 10 2014 Marcin Juszkiewicz <mjuszkiewicz@redhat.com> 1:5.5.34-6
- Disable main.gis-precise test also for AArch64
- Disable perfschema.func_file_io and perfschema.func_mutex for AArch64
(like it is done for 32-bit ARM)
* Fri Jan 10 2014 Honza Horak <hhorak@redhat.com> 1:5.5.34-5
- Clean all non-needed doc files properly
* Wed Jan 8 2014 Honza Horak <hhorak@redhat.com> 1:5.5.34-4
- Read socketfile location in mariadb-prepare-db-dir script
* Mon Jan 6 2014 Honza Horak <hhorak@redhat.com> 1:5.5.34-3
- Don't test EDH-RSA-DES-CBC-SHA cipher, it seems to be removed from openssl
which now makes mariadb/mysql FTBFS because openssl_1 test fails
Related: #1044565
- Use upstream's layout for symbols version in client library
Related: #1045013
- Check if socket file is not being used by another process at a time
of starting the service
Related: #1045435
- Use %%ghost directive for the log file
Related: 1043501
* Wed Nov 27 2013 Honza Horak <hhorak@redhat.com> 1:5.5.34-2
- Fix mariadb-wait-ready script
* Fri Nov 22 2013 Honza Horak <hhorak@redhat.com> 1:5.5.34-1
- Rebase to 5.5.34
* Mon Nov 4 2013 Honza Horak <hhorak@redhat.com> 1:5.5.33a-4
- Fix spec file to be ready for backport by Oden Eriksson
Resolves: #1026404
* Mon Nov 4 2013 Honza Horak <hhorak@redhat.com> 1:5.5.33a-3
- Add pam-devel to build-requires in order to build
Related: #1019945
- Check if correct process is running in mysql-wait-ready script
Related: #1026313
* Mon Oct 14 2013 Honza Horak <hhorak@redhat.com> 1:5.5.33a-2
- Turn on test suite
* Thu Oct 10 2013 Honza Horak <hhorak@redhat.com> 1:5.5.33a-1
- Rebase to 5.5.33a
https://kb.askmonty.org/en/mariadb-5533-changelog/
https://kb.askmonty.org/en/mariadb-5533a-changelog/
- Enable outfile_loaddata test
- Disable tokudb_innodb_xa_crash test
* Mon Sep 2 2013 Honza Horak <hhorak@redhat.com> - 1:5.5.32-12
- Re-organize my.cnf to include only generic settings
Resolves: #1003115
- Move pid file location to /var/run/mariadb
- Make mysqld a symlink to mariadb unit file rather than the opposite way
Related: #999589
* Thu Aug 29 2013 Honza Horak <hhorak@redhat.com> - 1:5.5.32-11
- Move log file into /var/log/mariadb/mariadb.log
- Rename logrotate script to mariadb
- Resolves: #999589
* Wed Aug 14 2013 Rex Dieter <rdieter@fedoraproject.org> 1:5.5.32-10
- fix alternatives usage
* Tue Aug 13 2013 Honza Horak <hhorak@redhat.com> - 1:5.5.32-9
- Multilib issues solved by alternatives
Resolves: #986959
* Sat Aug 03 2013 Petr Pisar <ppisar@redhat.com> - 1:5.5.32-8
- Perl 5.18 rebuild
* Wed Jul 31 2013 Honza Horak <hhorak@redhat.com> - 1:5.5.32-7
- Do not use login shell for mysql user
* Tue Jul 30 2013 Honza Horak <hhorak@redhat.com> - 1:5.5.32-6
- Remove unneeded systemd-sysv requires
- Provide mysql-compat-server symbol
- Create mariadb.service symlink
- Fix multilib header location for arm
- Enhance documentation in the unit file
- Use scriptstub instead of links to avoid multilib conflicts
- Add condition for doc placement in F20+
* Sun Jul 28 2013 Dennis Gilmore <dennis@ausil.us> - 1:5.5.32-5
- remove "Requires(pretrans): systemd" since its not possible
- when installing mariadb and systemd at the same time. as in a new install
* Sat Jul 27 2013 Kevin Fenzi <kevin@scrye.com> 1:5.5.32-4
- Set rpm doc macro to install docs in unversioned dir
* Fri Jul 26 2013 Dennis Gilmore <dennis@ausil.us> 1:5.5.32-3
- add Requires(pre) on systemd for the server package
* Tue Jul 23 2013 Dennis Gilmore <dennis@ausil.us> 1:5.5.32-2
- replace systemd-units requires with systemd
- remove solaris files
* Fri Jul 19 2013 Honza Horak <hhorak@redhat.com> 1:5.5.32-1
- Rebase to 5.5.32
https://kb.askmonty.org/en/mariadb-5532-changelog/
- Clean-up un-necessary systemd snippets
* Wed Jul 17 2013 Petr Pisar <ppisar@redhat.com> - 1:5.5.31-7
- Perl 5.18 rebuild
* Mon Jul 1 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-6
- Test suite params enhanced to decrease server condition influence
- Fix misleading error message when uninstalling built-in plugins
Related: #966873
* Thu Jun 27 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-5
- Apply fixes found by Coverity static analysis tool
* Wed Jun 19 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-4
- Do not use pretrans scriptlet, which doesn't work in anaconda
Resolves: #975348
* Fri Jun 14 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-3
- Explicitly enable mysqld if it was enabled in the beginning
of the transaction.
* Thu Jun 13 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-2
- Apply man page fix from Jan Stanek
* Fri May 24 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-1
- Rebase to 5.5.31
https://kb.askmonty.org/en/mariadb-5531-changelog/
- Preserve time-stamps in case of installed files
- Use /var/tmp instead of /tmp, since the later is using tmpfs,
which can cause problems
Resolves: #962087
- Fix test suite requirements
* Sun May 5 2013 Honza Horak <hhorak@redhat.com> 1:5.5.30-2
- Remove mytop utility, which is packaged separately
- Resolve multilib conflicts in mysql/private/config.h
* Fri Mar 22 2013 Honza Horak <hhorak@redhat.com> 1:5.5.30-1
- Rebase to 5.5.30
https://kb.askmonty.org/en/mariadb-5530-changelog/
* Fri Mar 22 2013 Honza Horak <hhorak@redhat.com> 1:5.5.29-11
- Obsolete MySQL since it is now renamed to community-mysql
- Remove real- virtual names
* Thu Mar 21 2013 Honza Horak <hhorak@redhat.com> 1:5.5.29-10
- Adding epoch to have higher priority than other mysql implementations
when comes to provider comparison
* Wed Mar 13 2013 Honza Horak <hhorak@redhat.com> 5.5.29-9
- Let mariadb-embedded-devel conflict with MySQL-embedded-devel
- Adjust mariadb-sortbuffer.patch to correspond with upstream patch
* Mon Mar 4 2013 Honza Horak <hhorak@redhat.com> 5.5.29-8
- Mask expected warnings about setrlimit in test suite
* Thu Feb 28 2013 Honza Horak <hhorak@redhat.com> 5.5.29-7
- Use configured prefix value instead of guessing basedir
in mysql_config
Resolves: #916189
- Export dynamic columns and non-blocking API functions documented
by upstream
* Wed Feb 27 2013 Honza Horak <hhorak@redhat.com> 5.5.29-6
- Fix sort_buffer_length option type
* Wed Feb 13 2013 Honza Horak <hhorak@redhat.com> 5.5.29-5
- Suppress warnings in tests and skip tests also on ppc64p7
* Tue Feb 12 2013 Honza Horak <hhorak@redhat.com> 5.5.29-4
- Suppress warning in tests on ppc
- Enable fixed index_merge_myisam test case
* Thu Feb 07 2013 Honza Horak <hhorak@redhat.com> 5.5.29-3
- Packages need to provide also %%_isa version of mysql package
- Provide own symbols with real- prefix to distinguish from mysql
unambiguously
- Fix format for buffer size in error messages (MDEV-4156)
- Disable some tests that fail on ppc and s390
- Conflict only with real-mysql, otherwise mariadb conflicts with ourself
* Tue Feb 05 2013 Honza Horak <hhorak@redhat.com> 5.5.29-2
- Let mariadb-libs to own /etc/my.cnf.d
* Thu Jan 31 2013 Honza Horak <hhorak@redhat.com> 5.5.29-1
- Rebase to 5.5.29
https://kb.askmonty.org/en/mariadb-5529-changelog/
- Fix inaccurate default for socket location in mysqld-wait-ready
Resolves: #890535
* Thu Jan 31 2013 Honza Horak <hhorak@redhat.com> 5.5.28a-8
- Enable obsoleting mysql
* Wed Jan 30 2013 Honza Horak <hhorak@redhat.com> 5.5.28a-7
- Adding necessary hacks for perl dependency checking, rpm is still
not wise enough
- Namespace sanity re-added for symbol default_charset_info
* Mon Jan 28 2013 Honza Horak <hhorak@redhat.com> 5.5.28a-6
- Removed %%{_isa} from provides/obsoletes, which doesn't allow
proper obsoleting
- Do not obsolete mysql at the time of testing
* Thu Jan 10 2013 Honza Horak <hhorak@redhat.com> 5.5.28a-5
- Added licenses LGPLv2 and BSD
- Removed wrong usage of %%{epoch}
- Test-suite is run in %%check
- Removed perl dependency checking adjustment, rpm seems to be smart enough
- Other minor spec file fixes
* Tue Dec 18 2012 Honza Horak <hhorak@redhat.com> 5.5.28a-4
- Packaging of MariaDB based on MySQL package