## Configuration file for a typical Tor user
## Last updated 22 September 2015 for Tor 0.2.7.3-alpha.
## (may or may not work for much older or much newer versions of Tor.)
##
## Lines that begin with "## " try to explain what's going on. Lines
## that begin with just "#" are disabled commands: you can enable them
## by removing the "#" symbol.
##
## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
## for more options you can use in this file.
##
## Tor will look for this file in various places based on your platform:
## https://www.torproject.org/docs/faq#torrc
ControlSocket /run/tor/control
ControlSocketsGroupWritable 1
CookieAuthentication 1
CookieAuthFile /run/tor/control.authcookie
CookieAuthFileGroupReadable 1
## Tor opens a SOCKS proxy on port 9050 by default -- even if you don't
## configure one below. Set "SOCKSPort 0" if you plan to run Tor only
## as a relay, and not make any local application connections yourself.
#SOCKSPort 9050 # Default: Bind to localhost:9050 for local connections.
#SOCKSPort 192.168.0.1:9100 # Bind to this address:port too.
## Entry policies to allow/deny SOCKS requests based on IP address.
## First entry that matches wins. If no SOCKSPolicy is set, we accept
## all (and only) requests that reach a SOCKSPort. Untrusted users who
## can access your SOCKSPort may be able to learn about the connections
## you make.
#SOCKSPolicy accept 192.168.0.0/16
#SOCKSPolicy accept6 FC00::/7
#SOCKSPolicy reject *
## Logs go to stdout at level "notice" unless redirected by something
## else, like one of the below lines. You can have as many Log lines as
## you want.
##
## We advise using "notice" in most cases, since anything more verbose
## may provide sensitive information to an attacker who obtains the logs.
##
## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
#Log notice file /var/log/tor/notices.log
## Send every possible message to /var/log/tor/debug.log
#Log debug file /var/log/tor/debug.log
## Use the system log instead of Tor's logfiles
#Log notice syslog
## To send all messages to stderr:
#Log debug stderr
## Uncomment this to start the process in the background... or use
## --runasdaemon 1 on the command line. This is ignored on Windows;
## see the FAQ entry if you want Tor to run as an NT service.
#RunAsDaemon 1
## The directory for keeping all the keys/etc. By default, we store
## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
#DataDirectory /var/lib/tor
## The port on which Tor will listen for local connections from Tor
## controller applications, as documented in control-spec.txt.
#ControlPort 9051
## If you enable the controlport, be sure to enable one of these
## authentication methods, to prevent attackers from accessing it.
#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
#CookieAuthentication 1
############### This section is just for location-hidden services ###
## Once you have configured a hidden service, you can look at the
## contents of the file ".../hidden_service/hostname" for the address
## to tell people.
##
## HiddenServicePort x y:z says to redirect requests on port x to the
## address y:z.
#HiddenServiceDir /var/lib/tor/hidden_service/
#HiddenServicePort 80 127.0.0.1:80
#HiddenServiceDir /var/lib/tor/other_hidden_service/
#HiddenServicePort 80 127.0.0.1:80
#HiddenServicePort 22 127.0.0.1:22
################ This section is just for relays #####################
#
## See https://www.torproject.org/docs/tor-doc-relay for details.
## Required: what port to advertise for incoming Tor connections.
#ORPort 9001
## If you want to listen on a port other than the one advertised in
## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
## follows. You'll need to do ipchains or other port forwarding
## yourself to make this work.
#ORPort 443 NoListen
#ORPort 127.0.0.1:9090 NoAdvertise
## The IP address or full DNS name for incoming connections to your
## relay. Leave commented out and Tor will guess.
#Address noname.example.com
## If you have multiple network interfaces, you can specify one for
## outgoing traffic to use.
# OutboundBindAddress 10.0.0.5
## A handle for your relay, so people don't have to refer to it by key.
## Nicknames must be between 1 and 19 characters inclusive, and must
## contain only the characters [a-zA-Z0-9].
#Nickname ididnteditheconfig
## Define these to limit how much relayed traffic you will allow. Your
## own traffic is still unthrottled. Note that RelayBandwidthRate must
## be at least 75 kilobytes per second.
## Note that units for these config options are bytes (per second), not
## bits (per second), and that prefixes are binary prefixes, i.e. 2^10,
## 2^20, etc.
#RelayBandwidthRate 100 KBytes # Throttle traffic to 100KB/s (800Kbps)
#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB (1600Kb)
## Use these to restrict the maximum traffic per day, week, or month.
## Note that this threshold applies separately to sent and received bytes,
## not to their sum: setting "40 GB" may allow up to 80 GB total before
## hibernating.
##
## Set a maximum of 40 gigabytes each way per period.
#AccountingMax 40 GBytes
## Each period starts daily at midnight (AccountingMax is per day)
#AccountingStart day 00:00
## Each period starts on the 3rd of the month at 15:00 (AccountingMax
## is per month)
#AccountingStart month 3 15:00
## Administrative contact information for this relay or bridge. This line
## can be used to contact you if your relay or bridge is misconfigured or
## something else goes wrong. Note that we archive and publish all
## descriptors containing these lines and that Google indexes them, so
## spammers might also collect them. You may want to obscure the fact that
## it's an email address and/or generate a new address for this purpose.
#ContactInfo Random Person <nobody AT example dot com>
## You might also include your PGP or GPG fingerprint if you have one:
#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
## Uncomment this to mirror directory information for others. Please do
## if you have enough bandwidth.
#DirPort 9030 # what port to advertise for directory connections
## If you want to listen on a port other than the one advertised in
## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
## follows. below too. You'll need to do ipchains or other port
## forwarding yourself to make this work.
#DirPort 80 NoListen
#DirPort 127.0.0.1:9091 NoAdvertise
## Uncomment to return an arbitrary blob of html on your DirPort. Now you
## can explain what Tor is if anybody wonders why your IP address is
## contacting them. See contrib/tor-exit-notice.html in Tor's source
## distribution for a sample.
#DirPortFrontPage /etc/tor/tor-exit-notice.html
## Uncomment this if you run more than one Tor relay, and add the identity
## key fingerprint of each Tor relay you control, even if they're on
## different networks. You declare it here so Tor clients can avoid
## using more than one of your relays in a single circuit. See
## https://www.torproject.org/docs/faq#MultipleRelays
## However, you should never include a bridge's fingerprint here, as it would
## break its concealability and potentially reveal its IP/TCP address.
#MyFamily $keyid,$keyid,...
## A comma-separated list of exit policies. They're considered first
## to last, and the first match wins.
##
## If you want to allow the same ports on IPv4 and IPv6, write your rules
## using accept/reject *. If you want to allow different ports on IPv4 and
## IPv6, write your IPv6 rules using accept6/reject6 *6, and your IPv4 rules
## using accept/reject *4.
##
## If you want to _replace_ the default exit policy, end this with either a
## reject *:* or an accept *:*. Otherwise, you're _augmenting_ (prepending to)
## the default exit policy. Leave commented to just use the default, which is
## described in the man page or at
## https://www.torproject.org/documentation.html
##
## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
## for issues you might encounter if you use the default exit policy.
##
## If certain IPs and ports are blocked externally, e.g. by your firewall,
## you should update your exit policy to reflect this -- otherwise Tor
## users will be told that those destinations are down.
##
## For security, by default Tor rejects connections to private (local)
## networks, including to the configured primary public IPv4 and IPv6 addresses,
## and any public IPv4 and IPv6 addresses on any interface on the relay.
## See the man page entry for ExitPolicyRejectPrivate if you want to allow
## "exit enclaving".
##
#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports on IPv4 and IPv6 but no more
#ExitPolicy accept *:119 # accept nntp ports on IPv4 and IPv6 as well as default exit policy
#ExitPolicy accept *4:119 # accept nntp ports on IPv4 only as well as default exit policy
#ExitPolicy accept6 *6:119 # accept nntp ports on IPv6 only as well as default exit policy
#ExitPolicy reject *:* # no exits allowed
## Bridge relays (or "bridges") are Tor relays that aren't listed in the
## main directory. Since there is no complete public list of them, even an
## ISP that filters connections to all the known Tor relays probably
## won't be able to block all the bridges. Also, websites won't treat you
## differently because they won't know you're running Tor. If you can
## be a real relay, please do; but if not, be a bridge!
#BridgeRelay 1
## By default, Tor will advertise your bridge to users through various
## mechanisms like https://bridges.torproject.org/. If you want to run
## a private bridge, for example because you'll give out your bridge
## address manually to your friends, uncomment this line:
#PublishServerDescriptor 0
UseBridges 1
ClientTransportPlugin obfs2,obfs3,obfs4,scramblesuit exec /usr/bin/obfs4proxy
Bridge obfs4 154.35.22.10:443 8FB9F4319E89E5C6223052AA525A192AFBC85D55 cert=GGGS1TX4R81m3r0HBl79wKy1OtPPNR2CZUIrHjkRg65Vc2VR8fOyo64f9kmT1UAFG7j0HQ iat-mode=0
Bridge obfs4 154.35.22.12:80 00DC6C4FA49A65BD1472993CF6730D54F11E0DBB cert=N86E9hKXXXVz6G7w2z8wFfhIDztDAzZ/3poxVePHEYjbKDWzjkRDccFMAnhK75fc65pYSg iat-mode=0
Bridge obfs4 85.17.30.79:443 FC259A04A328A07FED1413E9FC6526530D9FD87A cert=RutxZlu8BtyP+y0NX7bAVD41+J/qXNhHUrKjFkRSdiBAhIHIQLhKQ2HxESAKZprn/lR3KA iat-mode=0
Bridge obfs4 37.218.245.14:38224 D9A82D2F9C2F65A18407B1D2B764F130847F8B5D cert=bjRaMrr1BRiAW8IE9U5z27fQaYgOhX1UCmOpg2pFpoMvo6ZgQMzLsaTzzQNTlm7hNcb+Sg iat-mode=0
Bridge obfs4 198.245.60.50:443 752CF7825B3B9EA6A98C83AC41F7099D67007EA5 cert=xpmQtKUqQ/6v5X7ijgYE/f03+l2/EuQ1dexjyUhh16wQlu/cpXUGalmhDIlhuiQPNEKmKw iat-mode=0
Bridge obfs4 38.229.33.83:80 0BAC39417268B96B9F514E7F63FA6FBA1A788955 cert=VwEFpk9F/UN9JED7XpG1XOjm/O8ZCXK80oPecgWnNDZDv5pdkhq1OpbAH0wNqOT6H6BmRQ iat-mode=1
Bridge obfs4 154.35.22.11:16488 A832D176ECD5C7C6B58825AE22FC4C90FA249637 cert=YPbQqXPiqTUBfjGFLpm9JYEFTBvnzEJDKJxXG5Sxzrr/v2qrhGU4Jls9lHjLAhqpXaEfZw iat-mode=0
Bridge obfs4 192.95.36.142:443 CDF2E852BF539B82BD10E27E9115A31734E378C2 cert=qUVQ0srL1JI/vO6V6m/24anYXiJD3QP2HgzUKQtQ7GRqqUvs7P+tG43RtAqdhLOALP7DJQ iat-mode=1
Bridge obfs4 154.35.22.11:443 A832D176ECD5C7C6B58825AE22FC4C90FA249637 cert=YPbQqXPiqTUBfjGFLpm9JYEFTBvnzEJDKJxXG5Sxzrr/v2qrhGU4Jls9lHjLAhqpXaEfZw iat-mode=0
Bridge obfs4 154.35.22.9:443 C73ADBAC8ADFDBF0FC0F3F4E8091C0107D093716 cert=gEGKc5WN/bSjFa6UkG9hOcft1tuK+cV8hbZ0H6cqXiMPLqSbCh2Q3PHe5OOr6oMVORhoJA iat-mode=0
Bridge obfs4 37.218.240.34:40035 88CD36D45A35271963EF82E511C8827A24730913 cert=eGXYfWODcgqIdPJ+rRupg4GGvVGfh25FWaIXZkit206OSngsp7GAIiGIXOJJROMxEqFKJg iat-mode=1
Bridge obfs4 83.212.101.3:50002 A09D536DD1752D542E1FBB3C9CE4449D51298239 cert=lPRQ/MXdD1t5SRZ9MquYQNT9m5DV757jtdXdlePmRCudUU9CFUOX1Tm7/meFSyPOsud7Cw iat-mode=0
Bridge obfs4 154.35.22.13:443 FE7840FE1E21FE0A0639ED176EDA00A3ECA1E34D cert=fKnzxr+m+jWXXQGCaXe4f2gGoPXMzbL+bTBbXMYXuK0tMotd+nXyS33y2mONZWU29l81CA iat-mode=0
Bridge obfs4 154.35.22.11:80 A832D176ECD5C7C6B58825AE22FC4C90FA249637 cert=YPbQqXPiqTUBfjGFLpm9JYEFTBvnzEJDKJxXG5Sxzrr/v2qrhGU4Jls9lHjLAhqpXaEfZw iat-mode=0
Bridge obfs4 109.105.109.165:10527 8DFCD8FB3285E855F5A55EDDA35696C743ABFC4E cert=Bvg/itxeL4TWKLP6N1MaQzSOC6tcRIBv6q57DYAZc3b2AzuM+/TfB7mqTFEfXILCjEwzVA iat-mode=1
Bridge obfs4 154.35.22.12:4304 00DC6C4FA49A65BD1472993CF6730D54F11E0DBB cert=N86E9hKXXXVz6G7w2z8wFfhIDztDAzZ/3poxVePHEYjbKDWzjkRDccFMAnhK75fc65pYSg iat-mode=0
Bridge obfs4 109.105.109.147:13764 BBB28DF0F201E706BE564EFE690FE9577DD8386D cert=KfMQN/tNMFdda61hMgpiMI7pbwU1T+wxjTulYnfw+4sgvG0zSH7N7fwT10BI8MUdAD7iJA iat-mode=2
Bridge obfs4 38.229.1.78:80 C8CBDB2464FC9804A69531437BCF2BE31FDD2EE4 cert=Hmyfd2ev46gGY7NoVxA9ngrPF2zCZtzskRTzoWXbxNkzeVnGFPWmrTtILRyqCTjHR+s9dg iat-mode=1
Bridge obfs4 [2001:470:b381:bfff:216:3eff:fe23:d6c3]:443 CDF2E852BF539B82BD10E27E9115A31734E378C2 cert=qUVQ0srL1JI/vO6V6m/24anYXiJD3QP2HgzUKQtQ7GRqqUvs7P+tG43RtAqdhLOALP7DJQ iat-mode=1
Bridge obfs4 154.35.22.9:12166 C73ADBAC8ADFDBF0FC0F3F4E8091C0107D093716 cert=gEGKc5WN/bSjFa6UkG9hOcft1tuK+cV8hbZ0H6cqXiMPLqSbCh2Q3PHe5OOr6oMVORhoJA iat-mode=0
Bridge obfs4 154.35.22.9:80 C73ADBAC8ADFDBF0FC0F3F4E8091C0107D093716 cert=gEGKc5WN/bSjFa6UkG9hOcft1tuK+cV8hbZ0H6cqXiMPLqSbCh2Q3PHe5OOr6oMVORhoJA iat-mode=0
Bridge obfs4 192.99.11.54:443 7B126FAB960E5AC6A629C729434FF84FB5074EC2 cert=VW5f8+IBUWpPFxF+rsiVy2wXkyTQG7vEd+rHeN2jV5LIDNu8wMNEOqZXPwHdwMVEBdqXEw iat-mode=0
Bridge obfs4 154.35.22.13:16815 FE7840FE1E21FE0A0639ED176EDA00A3ECA1E34D cert=fKnzxr+m+jWXXQGCaXe4f2gGoPXMzbL+bTBbXMYXuK0tMotd+nXyS33y2mONZWU29l81CA iat-mode=0
Bridge obfs4 154.35.22.10:80 8FB9F4319E89E5C6223052AA525A192AFBC85D55 cert=GGGS1TX4R81m3r0HBl79wKy1OtPPNR2CZUIrHjkRg65Vc2VR8fOyo64f9kmT1UAFG7j0HQ iat-mode=0
Bridge obfs4 154.35.22.10:15937 8FB9F4319E89E5C6223052AA525A192AFBC85D55 cert=GGGS1TX4R81m3r0HBl79wKy1OtPPNR2CZUIrHjkRg65Vc2VR8fOyo64f9kmT1UAFG7j0HQ iat-mode=0