diff --git a/openssh-6.4p1-legacy-ssh-copy-id.patch b/openssh-6.4p1-legacy-ssh-copy-id.patch deleted file mode 100644 index ba8d949..0000000 --- a/openssh-6.4p1-legacy-ssh-copy-id.patch +++ /dev/null @@ -1,57 +0,0 @@ -diff -up openssh-6.4p1/contrib/ssh-copy-id.1.legacy-ssh-copy-id openssh-6.4p1/contrib/ssh-copy-id.1 ---- openssh-6.4p1/contrib/ssh-copy-id.1.legacy-ssh-copy-id 2013-03-22 00:17:37.000000000 +0100 -+++ openssh-6.4p1/contrib/ssh-copy-id.1 2014-01-28 17:12:49.197542425 +0100 -@@ -180,6 +180,19 @@ should prove enlightening (N.B. the mode - .Fl W - option, rather than - .Xr nc 1 ) . -+.Sh ENVIRONMENT -+.Bl -tag -width Ds -+.Pp -+.It Pa SSH_COPY_ID_LEGACY -+If the -+.Cm SSH_COPY_ID_LEGACY -+environment variable is set, the -+.Nm -+is run in a legacy mode. In this mode, the -+.Nm -+doesn't check an existence of a private key and doesn't do remote checks -+of the remote server versions or if public keys are already installed. -+.El - .Sh "SEE ALSO" - .Xr ssh 1 , - .Xr ssh-agent 1 , -diff -up openssh-6.4p1/contrib/ssh-copy-id.legacy-ssh-copy-id openssh-6.4p1/contrib/ssh-copy-id ---- openssh-6.4p1/contrib/ssh-copy-id.legacy-ssh-copy-id 2013-06-05 14:48:45.000000000 +0200 -+++ openssh-6.4p1/contrib/ssh-copy-id 2014-01-28 17:11:51.538833032 +0100 -@@ -77,7 +77,7 @@ use_id_file() { - PUB_ID_FILE="$L_ID_FILE.pub" - fi - -- PRIV_ID_FILE=$(dirname "$PUB_ID_FILE")/$(basename "$PUB_ID_FILE" .pub) -+ [ "x$SSH_COPY_ID_LEGACY" != "x" ] || PRIV_ID_FILE=$(dirname "$PUB_ID_FILE")/$(basename "$PUB_ID_FILE" .pub) - - # check that the files are readable - for f in $PUB_ID_FILE $PRIV_ID_FILE ; do -@@ -243,7 +243,7 @@ populate_new_ids() { - printf '%s: INFO: %d key(s) remain to be installed -- if you are prompted now it is to install the new keys\n' "$0" "$(printf '%s\n' "$NEW_IDS" | wc -l)" >&2 - } - --REMOTE_VERSION=$(ssh -v -o PreferredAuthentications=',' "$@" 2>&1 | -+[ "x$SSH_COPY_ID_LEGACY" != "x" ] || REMOTE_VERSION=$(ssh -v -o PreferredAuthentications=',' "$@" 2>&1 | - sed -ne 's/.*remote software version //p') - - case "$REMOTE_VERSION" in -@@ -268,7 +268,11 @@ case "$REMOTE_VERSION" in - ;; - *) - # Assuming that the remote host treats ~/.ssh/authorized_keys as one might expect -- populate_new_ids 0 -+ if [ "x$SSH_COPY_ID_LEGACY" != "x" ]; then -+ NEW_IDS=`eval "$GET_ID"` -+ else -+ populate_new_ids 0 -+ fi - [ "$DRY_RUN" ] || printf '%s\n' "$NEW_IDS" | ssh "$@" " - umask 077 ; - mkdir -p .ssh && cat >> .ssh/authorized_keys || exit 1 ; diff --git a/openssh-6.7p1-ssh-copy-id-truncated-keys.patch b/openssh-6.7p1-ssh-copy-id-truncated-keys.patch deleted file mode 100644 index f4c91a4..0000000 --- a/openssh-6.7p1-ssh-copy-id-truncated-keys.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff --git a/contrib/ssh-copy-id b/contrib/ssh-copy-id -index 4bba5d6..ed1208e 100644 ---- a/contrib/ssh-copy-id -+++ b/contrib/ssh-copy-id -@@ -207,7 +207,7 @@ populate_new_ids() { - printf '%s: INFO: attempting to log in with the new key(s), to filter out any that are already installed\n' "$0" >&2 - NEW_IDS=$( - eval $GET_ID | { -- while read ID ; do -+ while read ID || [[ -n $ID ]]; do - printf '%s\n' "$ID" > $L_TMP_ID_FILE - - # the next line assumes $PRIV_ID_FILE only set if using a single id file - this diff --git a/openssh-6.8p1-fix-ssh-copy-id-on-non-sh-shell.patch b/openssh-6.8p1-fix-ssh-copy-id-on-non-sh-shell.patch deleted file mode 100644 index 358986b..0000000 --- a/openssh-6.8p1-fix-ssh-copy-id-on-non-sh-shell.patch +++ /dev/null @@ -1,15 +0,0 @@ -diff --git a/contrib/ssh-copy-id b/contrib/ssh-copy-id -index 8e1091c..4bba5d6 100644 ---- a/contrib/ssh-copy-id -+++ b/contrib/ssh-copy-id -@@ -274,9 +274,7 @@ case "$REMOTE_VERSION" in - populate_new_ids 0 - fi - [ "$DRY_RUN" ] || printf '%s\n' "$NEW_IDS" | ssh "$@" " -- umask 077 ; -+ exec sh -c 'umask 077; mkdir -p .ssh && cat >> .ssh/authorized_keys || exit 1; if type restorecon >/dev/null 2>&1; then restorecon -F .ssh .ssh/authorized_keys; fi'" \ -- mkdir -p .ssh && cat >> .ssh/authorized_keys || exit 1 ; -- if type restorecon >/dev/null 2>&1 ; then restorecon -F .ssh .ssh/authorized_keys ; fi" \ - || exit 1 - ADDED=$(printf '%s\n' "$NEW_IDS" | wc -l) - ;; diff --git a/openssh-7.1p1-ssh-copy-id.patch b/openssh-7.1p1-ssh-copy-id.patch new file mode 100644 index 0000000..089c623 --- /dev/null +++ b/openssh-7.1p1-ssh-copy-id.patch @@ -0,0 +1,492 @@ +From 1a52b2d612b1d0c2a15dfcdc8da560704909ec72 Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Sat, 27 Jul 2013 14:16:52 +0100 +Subject: [PATCH] echo --> printf "%s: ERROR... (for consistency) + +--- + ssh-copy-id | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index ae88e99..516b87f 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -200,7 +200,7 @@ populate_new_ids() { + umask 0177 + local L_TMP_ID_FILE=$(mktemp ~/.ssh/ssh-copy-id_id.XXXXXXXXXX) + if test $? -ne 0 || test "x$L_TMP_ID_FILE" = "x" ; then +- echo "mktemp failed" 1>&2 ++ printf '%s: ERROR: mktemp failed\n' "$0" >&2 + exit 1 + fi + trap "rm -f $L_TMP_ID_FILE ${L_TMP_ID_FILE}.pub" EXIT TERM INT QUIT +-- +1.9.1 + + + +From baebbb9e18e4a1af7554d939710eacb665a24b68 Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Wed, 25 Nov 2015 17:05:39 +0100 +Subject: [PATCH] Deal with remote user shell being e.g. tcsh (fixes: 2206) + +as suggested by Jakub Jelen +--- + ssh-copy-id | 6 ++---- + 1 file changed, 2 insertions(+), 4 deletions(-) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index 516b87f..6a0447a 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -269,10 +269,8 @@ case "$REMOTE_VERSION" in + *) + # Assuming that the remote host treats ~/.ssh/authorized_keys as one might expect + populate_new_ids 0 +- [ "$DRY_RUN" ] || printf '%s\n' "$NEW_IDS" | ssh "$@" " +- umask 077 ; +- mkdir -p .ssh && cat >> .ssh/authorized_keys || exit 1 ; +- if type restorecon >/dev/null 2>&1 ; then restorecon -F .ssh .ssh/authorized_keys ; fi" \ ++ [ "$DRY_RUN" ] || printf '%s\n' "$NEW_IDS" | \ ++ ssh "$@" "exec sh -c 'umask 077 ; mkdir -p .ssh && cat >> .ssh/authorized_keys || exit 1 ; if type restorecon >/dev/null 2>&1 ; then restorecon -F .ssh .ssh/authorized_keys ; fi'" \ + || exit 1 + ADDED=$(printf '%s\n' "$NEW_IDS" | wc -l) + ;; +-- +1.9.1 + + + +From 35f05e39cda8670b3f6797330a3e521fda509a4c Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Wed, 25 Nov 2015 21:14:00 +0100 +Subject: [PATCH] set LogLevel to ensure that it's not set to 'None' (closes: + 2214) + +As pointed out by Sami Haahtinen , +the LogLevel is set to 'None' we'll not get the +Permission Denied we're looking for. +--- + ssh-copy-id | 1 + + 1 file changed, 1 insertion(+) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index 6a0447a..70d3866 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -215,6 +215,7 @@ populate_new_ids() { + # The point being that if file based, ssh needs the private key, which it cannot + # find if only given the contents of the .pub file in an unrelated tmpfile + ssh -i "${PRIV_ID_FILE:-$L_TMP_ID_FILE}" \ ++ -o LogLevel=INFO \ + -o PreferredAuthentications=publickey \ + -o IdentitiesOnly=yes "$@" exit 2>$L_TMP_ID_FILE.stderr +Date: Wed, 25 Nov 2015 22:30:43 +0100 +Subject: [PATCH] set ControlPath=none (closes: 2488) +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf8 +Content-Transfer-Encoding: 8bit + +Thanks to Salvador Fandiño for the patch +This seems to be the same problem as described in 2195 +--- + ssh-copy-id | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index 70d3866..7df7fad 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -215,6 +215,7 @@ populate_new_ids() { + # The point being that if file based, ssh needs the private key, which it cannot + # find if only given the contents of the .pub file in an unrelated tmpfile + ssh -i "${PRIV_ID_FILE:-$L_TMP_ID_FILE}" \ ++ -o ControlPath=none \ + -o LogLevel=INFO \ + -o PreferredAuthentications=publickey \ + -o IdentitiesOnly=yes "$@" exit 2>$L_TMP_ID_FILE.stderr &2 + } + +-REMOTE_VERSION=$(ssh -v -o PreferredAuthentications=',' "$@" 2>&1 | ++REMOTE_VERSION=$(ssh -v -o PreferredAuthentications=',' -o ControlPath=none "$@" 2>&1 | + sed -ne 's/.*remote software version //p') + + case "$REMOTE_VERSION" in +-- +1.9.1 + + + +From 6fa6f1e3dbec32636e77d01228ceecfa3851c7e8 Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Wed, 25 Nov 2015 23:24:13 +0100 +Subject: [PATCH] add -f (forced) option to install keys unconditionally + (closes: 2110) + +Thanks for the patch from Petr Lautrbach +which inspired this. +--- + ssh-copy-id | 15 +++++++++++++-- + ssh-copy-id.1 | 5 +++++ + 2 files changed, 18 insertions(+), 2 deletions(-) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index 7df7fad..3121171 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -59,7 +59,10 @@ fi + DEFAULT_PUB_ID_FILE=$(ls -t ${HOME}/.ssh/id*.pub 2>/dev/null | grep -v -- '-cert.pub$' | head -n 1) + + usage () { +- printf 'Usage: %s [-h|-?|-n] [-i [identity_file]] [-p port] [[-o ] ...] [user@]hostname\n' "$0" >&2 ++ printf 'Usage: %s [-h|-?|-f|-n] [-i [identity_file]] [-p port] [[-o ] ...] [user@]hostname\n' "$0" >&2 ++ printf '\t-f: force mode -- copy keys without trying to check if they are already installed\n' >&2 ++ printf '\t-n: dry run -- no keys are actually copied\n' >&2 ++ printf '\t-h|-?: print this help\n' >&2 + exit 1 + } + +@@ -121,7 +124,7 @@ do + } + shift + ;; +- -n|-h|-\?) ++ -f|-n|-h|-\?) + OPT="$1" + OPTARG= + shift +@@ -154,6 +157,9 @@ do + -o|-p) + SSH_OPTS="${SSH_OPTS:+$SSH_OPTS }$OPT '$(quote "$OPTARG")'" + ;; ++ -f) ++ FORCED=1 ++ ;; + -n) + DRY_RUN=1 + ;; +@@ -194,6 +200,11 @@ fi + populate_new_ids() { + local L_SUCCESS="$1" + ++ if [ "$FORCED" ] ; then ++ NEW_IDS=$(eval $GET_ID) ++ return ++ fi ++ + # repopulate "$@" inside this function + eval set -- "$SSH_OPTS" + +diff --git $1/contrib/ssh-copy-id.1 $1/contrib/ssh-copy-id.1 +index 67a59e4..8850cce 100644 +--- $1/contrib/ssh-copy-id.1 ++++ $1/contrib/ssh-copy-id.1 +@@ -29,6 +29,7 @@ THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + .Nd use locally available keys to authorise logins on a remote machine + .Sh SYNOPSIS + .Nm ++.Op Fl f + .Op Fl n + .Op Fl i Op Ar identity_file + .Op Fl p Ar port +@@ -76,6 +77,10 @@ is used. + Note that this can be used to ensure that the keys copied have the + comment one prefers and/or extra options applied, by ensuring that the + key file has these set as preferred before the copy is attempted. ++.It Fl f ++Forced mode: doesn't check if the keys are present on the remote server. ++This means that it does not need the private key. Of course, this can result ++in more than one copy of the key being installed on the remote system. + .It Fl n + do a dry-run. Instead of installing keys on the remote system simply + prints the key(s) that would have been installed. +-- +1.9.1 + + + +From ab185eea5a03cdd846c909d83e5dd0a07a44fb54 Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Wed, 25 Nov 2015 23:47:06 +0100 +Subject: [PATCH] deal with #2331 by suggesting the use of the -f option + +--- + ssh-copy-id | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index 3121171..8666cea 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -250,7 +250,8 @@ populate_new_ids() { + exit 1 + fi + if [ -z "$NEW_IDS" ] ; then +- printf '\n%s: WARNING: All keys were skipped because they already exist on the remote system.\n\n' "$0" >&2 ++ printf '\n%s: WARNING: All keys were skipped because they already exist on the remote system.\n' "$0" >&2 ++ printf '\t\t(if you think this is a mistake, you may want to use -f option)\n\n' "$0" >&2 + exit 0 + fi + printf '%s: INFO: %d key(s) remain to be installed -- if you are prompted now it is to install the new keys\n' "$0" "$(printf '%s\n' "$NEW_IDS" | wc -l)" >&2 +-- +1.9.1 + + + +From de78897ada50ed12f4b0c9faa6e935ce82ee49a6 Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Thu, 26 Nov 2015 00:25:56 +0100 +Subject: [PATCH] handle keys with missing trailing newline (closes: 2350) + +--- + ssh-copy-id | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index 8666cea..362b49b 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -218,7 +218,7 @@ populate_new_ids() { + printf '%s: INFO: attempting to log in with the new key(s), to filter out any that are already installed\n' "$0" >&2 + NEW_IDS=$( + eval $GET_ID | { +- while read ID ; do ++ while read ID || [ "$ID" ] ; do + printf '%s\n' "$ID" > $L_TMP_ID_FILE + + # the next line assumes $PRIV_ID_FILE only set if using a single id file - this +-- +1.9.1 + + + +From 6b903ab99a3f0107bb0dbde748a4372033bab00c Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Thu, 26 Nov 2015 00:36:09 +0100 +Subject: [PATCH] add a cd to ensure we're in the remote's home directory + (closes: 2349) + +--- + ssh-copy-id | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index 362b49b..2932936 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -284,7 +284,7 @@ case "$REMOTE_VERSION" in + # Assuming that the remote host treats ~/.ssh/authorized_keys as one might expect + populate_new_ids 0 + [ "$DRY_RUN" ] || printf '%s\n' "$NEW_IDS" | \ +- ssh "$@" "exec sh -c 'umask 077 ; mkdir -p .ssh && cat >> .ssh/authorized_keys || exit 1 ; if type restorecon >/dev/null 2>&1 ; then restorecon -F .ssh .ssh/authorized_keys ; fi'" \ ++ ssh "$@" "exec sh -c 'cd ; umask 077 ; mkdir -p .ssh && cat >> .ssh/authorized_keys || exit 1 ; if type restorecon >/dev/null 2>&1 ; then restorecon -F .ssh .ssh/authorized_keys ; fi'" \ + || exit 1 + ADDED=$(printf '%s\n' "$NEW_IDS" | wc -l) + ;; +-- +1.9.1 + + + +From 441892cbf4ff96fd96908582b8170f51890b5deb Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Sat, 28 Nov 2015 14:42:36 +0100 +Subject: [PATCH] add comment about why the ugly one-line remote command is as + it is + +In case anyone looks here for the details: + * tcsh doesn't support multi-line strings, + which is why it's a one-liner. + * tcsh doesn't do 2>&1, and fish doesn't do + 'command || command' which is why we're runnig this under + sh (which is very likely to be a POSIX shell on any vaguely + Unix-like system) + * The 'cd' is there to make sure we're in the home dir, because + there was a bug report about having a cd in ~/.bashrc that resulted + in a .ssh being created elsewhere. + * the 'exec' ensures that we're not relying on anything beyond the + (hopefully POSIX) shell that's available as 'sh' on the remote system +--- + ssh-copy-id | 1 + + 1 file changed, 1 insertion(+) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index 2932936..04c03eb 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -283,6 +283,7 @@ case "$REMOTE_VERSION" in + *) + # Assuming that the remote host treats ~/.ssh/authorized_keys as one might expect + populate_new_ids 0 ++ # in ssh below - to defend against quirky remote shells: use 'exec sh -c' to get POSIX; 'cd' to be at $HOME; and all on one line, because tcsh. + [ "$DRY_RUN" ] || printf '%s\n' "$NEW_IDS" | \ + ssh "$@" "exec sh -c 'cd ; umask 077 ; mkdir -p .ssh && cat >> .ssh/authorized_keys || exit 1 ; if type restorecon >/dev/null 2>&1 ; then restorecon -F .ssh .ssh/authorized_keys ; fi'" \ + || exit 1 +-- +1.9.1 + + + +From 8b59b122d321b97badd15c41e1a22863aa922a02 Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Sat, 28 Nov 2015 14:46:47 +0100 +Subject: [PATCH] with '-f' there's no need to have access to the private key + +--- + ssh-copy-id | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index 04c03eb..d3ff83b 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -80,7 +80,7 @@ use_id_file() { + PUB_ID_FILE="$L_ID_FILE.pub" + fi + +- PRIV_ID_FILE=$(dirname "$PUB_ID_FILE")/$(basename "$PUB_ID_FILE" .pub) ++ [ "$FORCED" ] || PRIV_ID_FILE=$(dirname "$PUB_ID_FILE")/$(basename "$PUB_ID_FILE" .pub) + + # check that the files are readable + for f in $PUB_ID_FILE $PRIV_ID_FILE ; do +-- +1.9.1 + + + +From 1b931894de0614099255244be789ad097fd0948a Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Sat, 28 Nov 2015 14:47:35 +0100 +Subject: [PATCH] if the private key is missing, point out that '-f' might be + what's needed + +--- + ssh-copy-id | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index d3ff83b..f0b01aa 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -85,7 +85,9 @@ use_id_file() { + # check that the files are readable + for f in $PUB_ID_FILE $PRIV_ID_FILE ; do + ErrMSG=$( { : < $f ; } 2>&1 ) || { +- printf "\n%s: ERROR: failed to open ID file '%s': %s\n\n" "$0" "$f" "$(printf "%s\n" "$ErrMSG" | sed -e 's/.*: *//')" ++ local L_PRIVMSG="" ++ [ "$f" = "$PRIV_ID_FILE" ] && L_PRIVMSG=" (to install the contents of '$PUB_ID_FILE' anyway, look at the -f option)" ++ printf "\n%s: ERROR: failed to open ID file '%s': %s\n" "$0" "$f" "$(printf "%s\n%s\n" "$ErrMSG" "$L_PRIVMSG" | sed -e 's/.*: *//')" + exit 1 + } + done +-- +1.9.1 + + + +From fd3e8b115e160a1332773cd8e06a3305d0d680ab Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Sat, 28 Nov 2015 21:10:39 +0100 +Subject: [PATCH] +INFO message to mitigate the surprise described in #2196 + +--- + ssh-copy-id | 1 + + 1 file changed, 1 insertion(+) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index f0b01aa..994194e 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -91,6 +91,7 @@ use_id_file() { + exit 1 + } + done ++ printf '%s: INFO: Source of key(s) to be installed: "%s"\n' "$0" $PUB_ID_FILE >&2 + GET_ID="cat \"$PUB_ID_FILE\"" + } + +-- +1.9.1 + + + +From 783ef08b0a757402aba67313f08f8dbfa9bf85f3 Mon Sep 17 00:00:00 2001 +From: Philip Hands +Date: Mon, 30 Nov 2015 20:46:19 +0100 +Subject: [PATCH] deal with $HOME and id filenames that include a space + +--- + ssh-copy-id | 15 ++++++++------- + 1 file changed, 8 insertions(+), 7 deletions(-) + +diff --git $1/contrib/ssh-copy-id $1/contrib/ssh-copy-id +index 994194e..afde8b1 100755 +--- $1/contrib/ssh-copy-id ++++ $1/contrib/ssh-copy-id +@@ -56,7 +56,7 @@ then + fi + fi + +-DEFAULT_PUB_ID_FILE=$(ls -t ${HOME}/.ssh/id*.pub 2>/dev/null | grep -v -- '-cert.pub$' | head -n 1) ++DEFAULT_PUB_ID_FILE="$HOME/$(cd "$HOME" ; ls -t .ssh/id*.pub 2>/dev/null | grep -v -- '-cert.pub$' | head -n 1)" + + usage () { + printf 'Usage: %s [-h|-?|-f|-n] [-i [identity_file]] [-p port] [[-o ] ...] [user@]hostname\n' "$0" >&2 +@@ -83,15 +83,15 @@ use_id_file() { + [ "$FORCED" ] || PRIV_ID_FILE=$(dirname "$PUB_ID_FILE")/$(basename "$PUB_ID_FILE" .pub) + + # check that the files are readable +- for f in $PUB_ID_FILE $PRIV_ID_FILE ; do +- ErrMSG=$( { : < $f ; } 2>&1 ) || { ++ for f in "$PUB_ID_FILE" ${PRIV_ID_FILE:+"$PRIV_ID_FILE"} ; do ++ ErrMSG=$( { : < "$f" ; } 2>&1 ) || { + local L_PRIVMSG="" + [ "$f" = "$PRIV_ID_FILE" ] && L_PRIVMSG=" (to install the contents of '$PUB_ID_FILE' anyway, look at the -f option)" + printf "\n%s: ERROR: failed to open ID file '%s': %s\n" "$0" "$f" "$(printf "%s\n%s\n" "$ErrMSG" "$L_PRIVMSG" | sed -e 's/.*: *//')" + exit 1 + } + done +- printf '%s: INFO: Source of key(s) to be installed: "%s"\n' "$0" $PUB_ID_FILE >&2 ++ printf '%s: INFO: Source of key(s) to be installed: "%s"\n' "$0" "$PUB_ID_FILE" >&2 + GET_ID="cat \"$PUB_ID_FILE\"" + } + +@@ -217,12 +217,13 @@ populate_new_ids() { + printf '%s: ERROR: mktemp failed\n' "$0" >&2 + exit 1 + fi +- trap "rm -f $L_TMP_ID_FILE ${L_TMP_ID_FILE}.pub" EXIT TERM INT QUIT ++ local L_CLEANUP="rm -f \"$L_TMP_ID_FILE\" \"${L_TMP_ID_FILE}.stderr\"" ++ trap "$L_CLEANUP" EXIT TERM INT QUIT + printf '%s: INFO: attempting to log in with the new key(s), to filter out any that are already installed\n' "$0" >&2 + NEW_IDS=$( + eval $GET_ID | { + while read ID || [ "$ID" ] ; do +- printf '%s\n' "$ID" > $L_TMP_ID_FILE ++ printf '%s\n' "$ID" > "$L_TMP_ID_FILE" + + # the next line assumes $PRIV_ID_FILE only set if using a single id file - this + # assumption will break if we implement the possibility of multiple -i options. +@@ -246,7 +247,7 @@ populate_new_ids() { + done + } + ) +- rm -f $L_TMP_ID_FILE* && trap - EXIT TERM INT QUIT ++ eval "$L_CLEANUP" && trap - EXIT TERM INT QUIT + + if expr "$NEW_IDS" : "^ERROR: " >/dev/null ; then + printf '\n%s: %s\n\n' "$0" "$NEW_IDS" >&2 +-- +1.9.1 + + diff --git a/openssh.spec b/openssh.spec index af102e5..7ba184e 100644 --- a/openssh.spec +++ b/openssh.spec @@ -185,8 +185,6 @@ Patch900: openssh-6.1p1-gssapi-canohost.patch Patch901: openssh-6.6p1-kuserok.patch # use default_ccache_name from /etc/krb5.conf (#991186) Patch902: openssh-6.3p1-krb5-use-default_ccache_name.patch -# Run ssh-copy-id in the legacy mode when SSH_COPY_ID_LEGACY variable is set (#969375 -Patch905: openssh-6.4p1-legacy-ssh-copy-id.patch # Use tty allocation for a remote scp (#985650) Patch906: openssh-6.4p1-fromto-remote.patch # set a client's address right after a connection is set @@ -214,12 +212,8 @@ Patch920: openssh-6.6.1p1-ip-port-config-parser.patch Patch921: openssh-6.7p1-debian-restore-tcp-wrappers.patch # apply upstream patch and make sshd -T more consistent (#1187521) Patch922: openssh-6.8p1-sshdT-output.patch -# fix ssh-copy-id on non-sh shells (#1045191) -Patch923: openssh-6.8p1-fix-ssh-copy-id-on-non-sh-shell.patch # Seccomp support for secondary architectures (#1195065) Patch924: openssh-6.9p1-seccomp-secondary.patch -# Solve issue with ssh-copy-id and keys without trailing newline (#1093168) -Patch925: openssh-6.7p1-ssh-copy-id-truncated-keys.patch # Add sftp option to force mode of created files (#1191055) Patch926: openssh-6.7p1-sftp-force-permission.patch # Memory problems @@ -236,6 +230,9 @@ Patch933: openssh-7.0p1-show-more-fingerprints.patch # Brokend HostKeyAlgorthms on server using + sign # from http://lists.mindrot.org/pipermail/openssh-unix-dev/2015-August/034324.html Patch934: openssh-7.1p1-hostkeyalgorithms.patch +# Updated version of ssh-copy-id +# http://git.hands.com/ssh-copy-id +Patch935: openssh-7.1p1-ssh-copy-id.patch License: BSD @@ -452,7 +449,6 @@ popd %patch900 -p1 -b .canohost %patch901 -p1 -b .kuserok %patch902 -p1 -b .ccache_name -%patch905 -p1 -b .legacy-ssh-copy-id %patch906 -p1 -b .fromto-remote %patch911 -p1 -b .set_remote_ipaddr %patch912 -p1 -b .utf8-banner @@ -465,9 +461,7 @@ popd %patch802 -p1 -b .GSSAPIEnablek5users %patch921 -p1 -b .tcp_wrappers %patch922 -p1 -b .sshdt -%patch923 -p1 -b .ssh-copy-id %patch924 -p1 -b .seccomp -%patch925 -p1 -b .newline %patch926 -p1 -b .sftp-force-mode %patch928 -p1 -b .memory %patch929 -p1 -b .root-login @@ -475,6 +469,7 @@ popd %patch932 -p1 -b .gsskexalg %patch933 -p1 -b .fingerprint %patch934 -p1 -b .hostkey +%patch935 -p1 -b .ssh-copy-id %patch200 -p1 -b .audit %patch700 -p1 -b .fips