diff -up pciutils-2.2.10/lib/configure.multilib pciutils-2.2.10/lib/configure
--- pciutils-2.2.10/lib/configure.multilib 2008-02-11 21:04:18.000000000 +0100
+++ pciutils-2.2.10/lib/configure 2008-02-20 11:04:18.000000000 +0100
@@ -37,74 +37,60 @@ zlib=$5
c=config.h
m=config.mk
-echo >$c "#define PCI_ARCH_`echo $cpu | tr '[a-z]' '[A-Z]'`"
-echo >>$c "#define PCI_OS_`echo $sys | tr '[a-z]' '[A-Z]'`"
-rm -f $m
+cm=config.h.mk
+cat >$c <<EOF
+#if defined(__x86_64__)
+#define PCI_ARCH_X86_64
+#elif defined(__ia64__)
+#define PCI_ARCH_IA64
+#elif defined(__i386__)
+#define PCI_ARCH_I386
+#define PCI_HAVE_PM_INTEL_CONF
+#elif defined(__ppc64__) || defined(__powerpc64__)
+#define PCI_ARCH_PPC64
+#elif defined(__ppc__) || defined(__powerpc__)
+#define PCI_ARCH_PPC
+#elif defined(__s390x__)
+#define PCI_ARCH_S390X
+#elif defined(__s390__)
+#define PCI_ARCH_S390
+#elif defined(__alpha__)
+#define PCI_ARCH_ALPHA
+#else
+#error Unknown Arch
+#endif
+#define PCI_OS_LINUX
+#define PCI_HAVE_PM_LINUX_SYSFS
+#define PCI_HAVE_PM_LINUX_PROC
+#define PCI_HAVE_LINUX_BYTEORDER_H
+#define PCI_PATH_PROC_BUS_PCI "/proc/bus/pci"
+#define PCI_PATH_SYS_BUS_PCI "/sys/bus/pci"
+#define PCI_HAVE_64BIT_ADDRESS
+EOF
+
+rm -f $cm
+echo >$cm "#define PCI_ARCH_`echo $cpu | tr 'a-z' 'A-Z'`"
+echo >>$cm "#define PCI_OS_`echo $sys | tr 'a-z' 'A-Z'`"
+
echo_n "Looking for access methods..."
-
-case $sys in
- linux*)
- echo_n " sysfs proc"
- echo >>$c '#define PCI_HAVE_PM_LINUX_SYSFS'
- echo >>$c '#define PCI_HAVE_PM_LINUX_PROC'
- echo >>$c '#define PCI_HAVE_LINUX_BYTEORDER_H'
- echo >>$c '#define PCI_PATH_PROC_BUS_PCI "/proc/bus/pci"'
- echo >>$c '#define PCI_PATH_SYS_BUS_PCI "/sys/bus/pci"'
- case $cpu in
- i386) echo_n " i386-ports"
- echo >>$c '#define PCI_HAVE_PM_INTEL_CONF'
- ;;
- esac
- echo >>$c '#define PCI_HAVE_64BIT_ADDRESS'
- ;;
- sunos)
- case $cpu in
- i386) echo_n " i386-ports"
- echo >>$c "#define PCI_HAVE_PM_INTEL_CONF"
- ;;
- *)
- echo " The PCI library does not support Solaris for this architecture: $cpu"
- exit 1
- ;;
- esac
- echo >>$c '#define PCI_HAVE_STDINT_H'
- ;;
- freebsd)
- echo_n " fbsd-device"
- echo >>$c '#define PCI_HAVE_PM_FBSD_DEVICE'
- echo >>$c '#define PCI_PATH_FBSD_DEVICE "/dev/pci"'
- ;;
- openbsd)
- echo_n " obsd-device"
- echo >>$c '#define PCI_HAVE_PM_OBSD_DEVICE'
- echo >>$c '#define PCI_PATH_OBSD_DEVICE "/dev/pci"'
- ;;
- aix)
- echo_n " aix-device"
- echo >>$c '#define PCI_HAVE_PM_AIX_DEVICE'
- echo >>$m 'CFLAGS=-g'
- echo >>$m 'INSTALL=installbsd'
- echo >>$m 'DIRINSTALL=mkdir -p'
- ;;
- netbsd)
- echo_n " nbsd-libpci"
- echo >>$c '#define PCI_HAVE_PM_NBSD_LIBPCI'
- echo >>$c '#define PCI_PATH_NBSD_DEVICE "/dev/pci0"'
- echo >>$m 'PCILIB=lib/libpciutils.a'
- echo >>$m 'LDLIBS+=-lpci'
- ;;
- gnu)
- echo_n " i386-ports"
- echo >>$c '#define PCI_HAVE_PM_INTEL_CONF'
- ;;
- *)
- echo " Unfortunately, your OS is not supported by the PCI Library"
- exit 1
- ;;
+echo_n " sysfs proc"
+
+echo >>$cm '#define PCI_HAVE_PM_LINUX_SYSFS'
+echo >>$cm '#define PCI_HAVE_PM_LINUX_PROC'
+echo >>$cm '#define PCI_HAVE_LINUX_BYTEORDER_H'
+echo >>$cm '#define PCI_PATH_PROC_BUS_PCI "/proc/bus/pci"'
+echo >>$cm '#define PCI_PATH_SYS_BUS_PCI "/sys/bus/pci"'
+case $cpu in
+ i386) echo_n " i386-ports"
+ echo >>$cm '#define PCI_HAVE_PM_INTEL_CONF'
+ ;;
esac
+echo >>$cm '#define PCI_HAVE_64BIT_ADDRESS'
+
echo >>$c '#define PCI_HAVE_PM_DUMP'
+echo >>$cm '#define PCI_HAVE_PM_DUMP'
echo " dump"
echo_n "Checking for zlib support... "
@@ -127,6 +113,8 @@ else
echo >>$c '#define PCI_IDS "pci.ids"'
fi
echo >>$c "#define PCI_PATH_IDS_DIR \"$idsdir\""
-
echo >>$c "#define PCILIB_VERSION \"$version\""
-sed '/"/{s/^#define \([^ ]*\) "\(.*\)"$/\1=\2/;p;d;};s/^#define \(.*\)/\1=1/' <$c >>$m
+echo >>$cm "#define PCI_PATH_IDS_DIR \"$idsdir\""
+echo >>$cm "#define PCILIB_VERSION \"$version\""
+#sed '/"/{s/^#define \([^ ]*\) "\(.*\)"$/\1=\2/;p;d;};s/^#define \(.*\)/\1=1/' <$c >>$m
+sed '/"/{s/^#define \([^ ]*\) "\(.*\)"$/\1=\2/;p;d;};s/^#define \(.*\)/\1=1/' <$cm >>$m