diff -up printrun/gui/controls.py.gtk3 printrun/gui/controls.py
--- printrun/gui/controls.py.gtk3 2015-03-09 07:22:14.000000000 -0400
+++ printrun/gui/controls.py 2015-08-11 23:43:27.444624125 -0400
@@ -136,7 +136,7 @@ def add_extra_controls(self, root, paren
if root.settings.last_temperature not in map(float, root.temps.values()):
htemp_choices = [str(root.settings.last_temperature)] + htemp_choices
root.htemp = wx.ComboBox(parentpanel, -1, choices = htemp_choices,
- style = wx.CB_DROPDOWN, size = (80, -1))
+ style = wx.CB_DROPDOWN, size = (115, -1))
root.htemp.SetToolTip(wx.ToolTip(_("Select Temperature for Hotend")))
root.htemp.Bind(wx.EVT_COMBOBOX, root.htemp_change)
@@ -156,7 +156,7 @@ def add_extra_controls(self, root, paren
if root.settings.last_bed_temperature not in map(float, root.bedtemps.values()):
btemp_choices = [str(root.settings.last_bed_temperature)] + btemp_choices
root.btemp = wx.ComboBox(parentpanel, -1, choices = btemp_choices,
- style = wx.CB_DROPDOWN, size = (80, -1))
+ style = wx.CB_DROPDOWN, size = (115, -1))
root.btemp.SetToolTip(wx.ToolTip(_("Select Temperature for Heated Bed")))
root.btemp.Bind(wx.EVT_COMBOBOX, root.btemp_change)
add("btemp_val", root.btemp)
@@ -192,7 +192,11 @@ def add_extra_controls(self, root, paren
root.speed_slider = wx.Slider(speedpanel, -1, 100, 1, 300)
speedsizer.Add(root.speed_slider, 1, flag = wx.EXPAND)
- root.speed_spin = FloatSpin(speedpanel, -1, value = 100, min_val = 1, max_val = 300, digits = 0, style = wx.ALIGN_LEFT, size = (80, -1))
+ if wx.VERSION < (3, 0):
+ root.speed_spin = FloatSpin(speedpanel, -1, value = 100, min_val = 1, max_val = 300, digits = 0, style = wx.ALIGN_LEFT, size = (80, -1))
+ else:
+ root.speed_spin = wx.SpinCtrlDouble(speedpanel, -1, initial = 100, min = 1, max = 300, style = wx.ALIGN_LEFT, size = (115, -1))
+ root.speed_spin.SetDigits(0)
speedsizer.Add(root.speed_spin, 0, flag = wx.ALIGN_CENTER_VERTICAL)
root.speed_label = wx.StaticText(speedpanel, -1, _("%"))
speedsizer.Add(root.speed_label, flag = wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_RIGHT)
@@ -210,7 +214,10 @@ def add_extra_controls(self, root, paren
value = root.speed_spin.GetValue()
root.speed_setbtn.SetBackgroundColour("red")
root.speed_slider.SetValue(value)
- root.speed_spin.Bind(wx.EVT_SPINCTRL, speedslider_spin)
+ if wx.VERSION < (3, 0):
+ root.speed_spin.Bind(wx.EVT_SPINCTRL, speedslider_spin)
+ else:
+ root.speed_spin.Bind(wx.EVT_SPINCTRLDOUBLE, speedslider_spin)
def speedslider_scroll(event):
value = root.speed_slider.GetValue()
@@ -269,10 +276,15 @@ def add_extra_controls(self, root, paren
esettingspanel = root.newPanel(parentpanel)
esettingssizer = wx.GridBagSizer()
esettingssizer.SetEmptyCellSize((0, 0))
- root.edist = FloatSpin(esettingspanel, -1, value = root.settings.last_extrusion, min_val = 0, max_val = 1000, size = (90, -1), digits = 1)
+ if wx.VERSION < (3, 0):
+ root.edist = FloatSpin(esettingspanel, -1, value = root.settings.last_extrusion, min_val = 0, max_val = 1000, size = (90, -1), digits = 1)
+ root.edist.Bind(wx.EVT_SPINCTRL, root.setfeeds)
+ else:
+ root.edist = wx.SpinCtrlDouble(esettingspanel, -1, initial = root.settings.last_extrusion, min = 0, max = 1000, size = (135, -1))
+ root.edist.SetDigits(1)
+ root.edist.Bind(wx.EVT_SPINCTRLDOUBLE, root.setfeeds)
root.edist.SetBackgroundColour((225, 200, 200))
root.edist.SetForegroundColour("black")
- root.edist.Bind(wx.EVT_SPINCTRL, root.setfeeds)
root.edist.Bind(wx.EVT_TEXT, root.setfeeds)
add("edist_label", wx.StaticText(esettingspanel, -1, _("Length:")), container = esettingssizer, flag = wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_LEFT | wx.RIGHT | wx.LEFT, border = 5)
add("edist_val", root.edist, container = esettingssizer, flag = wx.ALIGN_CENTER | wx.RIGHT, border = 5)
@@ -280,11 +292,16 @@ def add_extra_controls(self, root, paren
add("edist_unit", wx.StaticText(esettingspanel, -1, unit_label), container = esettingssizer, flag = wx.ALIGN_CENTER | wx.RIGHT, border = 5)
root.edist.SetToolTip(wx.ToolTip(_("Amount to Extrude or Retract (mm)")))
if not mini_mode:
- root.efeedc = FloatSpin(esettingspanel, -1, value = root.settings.e_feedrate, min_val = 0, max_val = 50000, size = (90, -1), digits = 1)
+ if wx.VERSION < (3, 0):
+ root.efeedc = FloatSpin(esettingspanel, -1, value = root.settings.e_feedrate, min_val = 0, max_val = 50000, size = (90, -1), digits = 1)
+ root.efeedc.Bind(wx.EVT_SPINCTRL, root.setfeeds)
+ else:
+ root.efeedc = wx.SpinCtrlDouble(esettingspanel, -1, initial = root.settings.e_feedrate, min = 0, max = 50000, size = (145, -1))
+ root.efeedc.SetDigits(1)
+ root.efeedc.Bind(wx.EVT_SPINCTRLDOUBLE, root.setfeeds)
root.efeedc.SetToolTip(wx.ToolTip(_("Extrude / Retract speed (mm/min)")))
root.efeedc.SetBackgroundColour((225, 200, 200))
root.efeedc.SetForegroundColour("black")
- root.efeedc.Bind(wx.EVT_SPINCTRL, root.setfeeds)
root.efeedc.Bind(wx.EVT_TEXT, root.setfeeds)
add("efeed_val", root.efeedc, container = esettingssizer, flag = wx.ALIGN_CENTER | wx.RIGHT, border = 5)
add("efeed_label", wx.StaticText(esettingspanel, -1, _("Speed:")), container = esettingssizer, flag = wx.ALIGN_LEFT)
@@ -379,12 +396,12 @@ class ControlsSizer(wx.GridBagSizer):
else:
self.extra_buttons[key] = btn
- root.xyfeedc = wx.SpinCtrl(lltspanel, -1, str(root.settings.xy_feedrate), min = 0, max = 50000, size = (97, -1))
+ root.xyfeedc = wx.SpinCtrl(lltspanel, -1, str(root.settings.xy_feedrate), min = 0, max = 50000, size = (130, -1))
root.xyfeedc.SetToolTip(wx.ToolTip(_("Set Maximum Speed for X & Y axes (mm/min)")))
llts.Add(wx.StaticText(lltspanel, -1, _("XY:")), flag = wx.ALIGN_RIGHT | wx.ALIGN_CENTER_VERTICAL)
llts.Add(root.xyfeedc)
llts.Add(wx.StaticText(lltspanel, -1, _("mm/min Z:")), flag = wx.ALIGN_RIGHT | wx.ALIGN_CENTER_VERTICAL)
- root.zfeedc = wx.SpinCtrl(lltspanel, -1, str(root.settings.z_feedrate), min = 0, max = 50000, size = (90, -1))
+ root.zfeedc = wx.SpinCtrl(lltspanel, -1, str(root.settings.z_feedrate), min = 0, max = 50000, size = (130, -1))
root.zfeedc.SetToolTip(wx.ToolTip(_("Set Maximum Speed for Z axis (mm/min)")))
llts.Add(root.zfeedc,)
diff -up printrun/gui/toolbar.py.gtk3 printrun/gui/toolbar.py
--- printrun/gui/toolbar.py.gtk3 2015-03-09 07:22:14.000000000 -0400
+++ printrun/gui/toolbar.py 2015-06-29 23:43:30.700768952 -0400
@@ -42,7 +42,7 @@ def MainToolbar(root, parentpanel = None
root.baud = wx.ComboBox(parentpanel, -1,
choices = ["2400", "9600", "19200", "38400",
"57600", "115200", "250000"],
- style = wx.CB_DROPDOWN, size = (100, -1))
+ style = wx.CB_DROPDOWN, size = (110, -1))
root.baud.SetToolTip(wx.ToolTip(_("Select Baud rate for printer communication")))
try:
root.baud.SetValue("115200")
diff -up printrun/projectlayer.py.gtk3 printrun/projectlayer.py
--- printrun/projectlayer.py.gtk3 2015-03-09 07:22:14.000000000 -0400
+++ printrun/projectlayer.py 2015-08-11 23:24:05.729359412 -0400
@@ -278,38 +278,48 @@ class SettingsFrame(wx.Frame):
# Left Column
fieldsizer.Add(wx.StaticText(self.panel, -1, "Layer (mm):"), pos = (0, 0), flag = wx.ALIGN_CENTER_VERTICAL)
- self.thickness = wx.TextCtrl(self.panel, -1, str(self._get_setting("project_layer", "0.1")), size = (80, -1))
+ self.thickness = wx.TextCtrl(self.panel, -1, str(self._get_setting("project_layer", "0.1")), size = (125, -1))
self.thickness.Bind(wx.EVT_TEXT, self.update_thickness)
self.thickness.SetHelpText("The thickness of each slice. Should match the value used to slice the model. SVG files update this value automatically, 3dlp.zip files have to be manually entered.")
fieldsizer.Add(self.thickness, pos = (0, 1))
fieldsizer.Add(wx.StaticText(self.panel, -1, "Exposure (s):"), pos = (1, 0), flag = wx.ALIGN_CENTER_VERTICAL)
- self.interval = wx.TextCtrl(self.panel, -1, str(self._get_setting("project_interval", "0.5")), size = (80, -1))
+ self.interval = wx.TextCtrl(self.panel, -1, str(self._get_setting("project_interval", "0.5")), size = (125, -1))
self.interval.Bind(wx.EVT_TEXT, self.update_interval)
self.interval.SetHelpText("How long each slice should be displayed.")
fieldsizer.Add(self.interval, pos = (1, 1))
fieldsizer.Add(wx.StaticText(self.panel, -1, "Blank (s):"), pos = (2, 0), flag = wx.ALIGN_CENTER_VERTICAL)
- self.pause = wx.TextCtrl(self.panel, -1, str(self._get_setting("project_pause", "0.5")), size = (80, -1))
+ self.pause = wx.TextCtrl(self.panel, -1, str(self._get_setting("project_pause", "0.5")), size = (125, -1))
self.pause.Bind(wx.EVT_TEXT, self.update_pause)
self.pause.SetHelpText("The pause length between slices. This should take into account any movement of the Z axis, plus time to prepare the resin surface (sliding, tilting, sweeping, etc).")
fieldsizer.Add(self.pause, pos = (2, 1))
fieldsizer.Add(wx.StaticText(self.panel, -1, "Scale:"), pos = (3, 0), flag = wx.ALIGN_CENTER_VERTICAL)
- self.scale = floatspin.FloatSpin(self.panel, -1, value = self._get_setting('project_scale', 1.0), increment = 0.1, digits = 3, size = (80, -1))
- self.scale.Bind(floatspin.EVT_FLOATSPIN, self.update_scale)
+ if wx.VERSION < (3, 0):
+ self.scale = floatspin.FloatSpin(self.panel, -1, value = self._get_setting('project_scale', 1.0), increment = 0.1, digits = 3, size = (80, -1))
+ self.scale.Bind(floatspin.EVT_FLOATSPIN, self.update_scale)
+ else:
+ self.scale = wx.SpinCtrlDouble(self.panel, -1, initial = self._get_setting('project_scale', 1.0), inc = 0.1, size = (125, -1))
+ self.scale.SetDigits(3)
+ self.scale.Bind(wx.EVT_SPINCTRLDOUBLE, self.update_scale)
self.scale.SetHelpText("The additional scaling of each slice.")
fieldsizer.Add(self.scale, pos = (3, 1))
fieldsizer.Add(wx.StaticText(self.panel, -1, "Direction:"), pos = (4, 0), flag = wx.ALIGN_CENTER_VERTICAL)
- self.direction = wx.ComboBox(self.panel, -1, choices = ["Top Down", "Bottom Up"], value = self._get_setting('project_direction', "Top Down"), size = (80, -1))
+ self.direction = wx.ComboBox(self.panel, -1, choices = ["Top Down", "Bottom Up"], value = self._get_setting('project_direction', "Top Down"), size = (125, -1))
self.direction.Bind(wx.EVT_COMBOBOX, self.update_direction)
self.direction.SetHelpText("The direction the Z axis should move. Top Down is where the projector is above the model, Bottom up is where the projector is below the model.")
fieldsizer.Add(self.direction, pos = (4, 1), flag = wx.ALIGN_CENTER_VERTICAL)
fieldsizer.Add(wx.StaticText(self.panel, -1, "Overshoot (mm):"), pos = (5, 0), flag = wx.ALIGN_CENTER_VERTICAL)
- self.overshoot = floatspin.FloatSpin(self.panel, -1, value = self._get_setting('project_overshoot', 3.0), increment = 0.1, digits = 1, min_val = 0, size = (80, -1))
- self.overshoot.Bind(floatspin.EVT_FLOATSPIN, self.update_overshoot)
+ if wx.VERSION < (3, 0):
+ self.overshoot = floatspin.FloatSpin(self.panel, -1, value = self._get_setting('project_overshoot', 3.0), increment = 0.1, digits = 1, min_val = 0, size = (80, -1))
+ self.overshoot.Bind(floatspin.EVT_FLOATSPIN, self.update_overshoot)
+ else:
+ self.overshoot = wx.SpinCtrlDouble(self.panel, -1, initial = self._get_setting('project_overshoot', 3.0), inc = 0.1, min = 0, size = (125, -1))
+ self.overshoot.SetDigits(1)
+ self.overshoot.Bind(wx.EVT_SPINCTRLDOUBLE, self.update_overshoot)
self.overshoot.SetHelpText("How far the axis should move beyond the next slice position for each slice. For Top Down printers this would dunk the model under the resi and then return. For Bottom Up printers this would raise the base away from the vat and then return.")
fieldsizer.Add(self.overshoot, pos = (5, 1))
@@ -329,38 +339,53 @@ class SettingsFrame(wx.Frame):
fieldsizer.Add(wx.StaticText(self.panel, -1, "X (px):"), pos = (0, 2), flag = wx.ALIGN_CENTER_VERTICAL)
projectX = int(math.floor(float(self._get_setting("project_x", 1920))))
- self.X = wx.SpinCtrl(self.panel, -1, str(projectX), max = 999999, size = (80, -1))
+ self.X = wx.SpinCtrl(self.panel, -1, str(projectX), max = 999999, size = (125, -1))
self.X.Bind(wx.EVT_SPINCTRL, self.update_resolution)
self.X.SetHelpText("The projector resolution in the X axis.")
fieldsizer.Add(self.X, pos = (0, 3))
fieldsizer.Add(wx.StaticText(self.panel, -1, "Y (px):"), pos = (1, 2), flag = wx.ALIGN_CENTER_VERTICAL)
projectY = int(math.floor(float(self._get_setting("project_y", 1200))))
- self.Y = wx.SpinCtrl(self.panel, -1, str(projectY), max = 999999, size = (80, -1))
+ self.Y = wx.SpinCtrl(self.panel, -1, str(projectY), max = 999999, size = (125, -1))
self.Y.Bind(wx.EVT_SPINCTRL, self.update_resolution)
self.Y.SetHelpText("The projector resolution in the Y axis.")
fieldsizer.Add(self.Y, pos = (1, 3))
fieldsizer.Add(wx.StaticText(self.panel, -1, "OffsetX (mm):"), pos = (2, 2), flag = wx.ALIGN_CENTER_VERTICAL)
- self.offset_X = floatspin.FloatSpin(self.panel, -1, value = self._get_setting("project_offset_x", 0.0), increment = 1, digits = 1, size = (80, -1))
- self.offset_X.Bind(floatspin.EVT_FLOATSPIN, self.update_offset)
+ if wx.VERSION < (3, 0):
+ self.offset_X = floatspin.FloatSpin(self.panel, -1, value = self._get_setting("project_offset_x", 0.0), increment = 1, digits = 1, size = (80, -1))
+ self.offset_X.Bind(floatspin.EVT_FLOATSPIN, self.update_offset)
+ else:
+ self.offset_X = wx.SpinCtrlDouble(self.panel, -1, initial = self._get_setting("project_offset_x", 0.0), inc = 1, size = (125, -1))
+ self.offset_X.SetDigits(1)
+ self.offset_X.Bind(wx.EVT_SPINCTRLDOUBLE, self.update_offset)
self.offset_X.SetHelpText("How far the slice should be offset from the edge in the X axis.")
fieldsizer.Add(self.offset_X, pos = (2, 3))
fieldsizer.Add(wx.StaticText(self.panel, -1, "OffsetY (mm):"), pos = (3, 2), flag = wx.ALIGN_CENTER_VERTICAL)
- self.offset_Y = floatspin.FloatSpin(self.panel, -1, value = self._get_setting("project_offset_y", 0.0), increment = 1, digits = 1, size = (80, -1))
- self.offset_Y.Bind(floatspin.EVT_FLOATSPIN, self.update_offset)
+ if wx.VERSION < (3, 0):
+ self.offset_Y = floatspin.FloatSpin(self.panel, -1, value = self._get_setting("project_offset_y", 0.0), increment = 1, digits = 1, size = (80, -1))
+ self.offset_Y.Bind(floatspin.EVT_FLOATSPIN, self.update_offset)
+ else:
+ self.offset_Y = wx.SpinCtrlDouble(self.panel, -1, initial = self._get_setting("project_offset_y", 0.0), inc = 1, size = (125, -1))
+ self.offset_Y.SetDigits(1)
+ self.offset_Y.Bind(wx.EVT_SPINCTRLDOUBLE, self.update_offset)
self.offset_Y.SetHelpText("How far the slice should be offset from the edge in the Y axis.")
fieldsizer.Add(self.offset_Y, pos = (3, 3))
fieldsizer.Add(wx.StaticText(self.panel, -1, "ProjectedX (mm):"), pos = (4, 2), flag = wx.ALIGN_CENTER_VERTICAL)
- self.projected_X_mm = floatspin.FloatSpin(self.panel, -1, value = self._get_setting("project_projected_x", 505.0), increment = 1, digits = 1, size = (80, -1))
- self.projected_X_mm.Bind(floatspin.EVT_FLOATSPIN, self.update_projected_Xmm)
+ if wx.VERSION < (3, 0):
+ self.projected_X_mm = floatspin.FloatSpin(self.panel, -1, value = self._get_setting("project_projected_x", 505.0), increment = 1, digits = 1, size = (80, -1))
+ self.projected_X_mm.Bind(floatspin.EVT_FLOATSPIN, self.update_projected_Xmm)
+ else:
+ self.projected_X_mm = wx.SpinCtrlDouble(self.panel, -1, initial = self._get_setting("project_projected_x", 505.0), inc = 1, size = (125, -1))
+ self.projected_X_mm.SetDigits(1)
+ self.projected_X_mm.Bind(wx.EVT_SPINCTRLDOUBLE, self.update_projected_Xmm)
self.projected_X_mm.SetHelpText("The actual width of the entire projected image. Use the Calibrate grid to show the full size of the projected image, and measure the width at the same level where the slice will be projected onto the resin.")
fieldsizer.Add(self.projected_X_mm, pos = (4, 3))
fieldsizer.Add(wx.StaticText(self.panel, -1, "Z Axis Speed (mm/min):"), pos = (5, 2), flag = wx.ALIGN_CENTER_VERTICAL)
- self.z_axis_rate = wx.SpinCtrl(self.panel, -1, str(self._get_setting("project_z_axis_rate", 200)), max = 9999, size = (80, -1))
+ self.z_axis_rate = wx.SpinCtrl(self.panel, -1, str(self._get_setting("project_z_axis_rate", 200)), max = 9999, size = (125, -1))
self.z_axis_rate.Bind(wx.EVT_SPINCTRL, self.update_z_axis_rate)
self.z_axis_rate.SetHelpText("Speed of the Z axis in mm/minute. Take into account that slower rates may require a longer pause value.")
fieldsizer.Add(self.z_axis_rate, pos = (5, 3))
@@ -394,7 +419,11 @@ class SettingsFrame(wx.Frame):
first_layer_boxer.Add(self.first_layer, flag = wx.ALIGN_CENTER_VERTICAL)
first_layer_boxer.Add(wx.StaticText(self.panel, -1, " (s):"), flag = wx.ALIGN_CENTER_VERTICAL)
- self.show_first_layer_timer = floatspin.FloatSpin(self.panel, -1, value=-1, increment = 1, digits = 1, size = (55, -1))
+ if wx.VERSION < (3, 0):
+ self.show_first_layer_timer = floatspin.FloatSpin(self.panel, -1, value=-1, increment = 1, digits = 1, size = (55, -1))
+ else:
+ self.show_first_layer_timer = wx.SpinCtrlDouble(self.panel, -1, initial = -1, inc = 1, size = (125, -1))
+ self.show_first_layer_timer.SetDigits(1)
self.show_first_layer_timer.SetHelpText("How long to display the first layer for. -1 = unlimited.")
first_layer_boxer.Add(self.show_first_layer_timer, flag = wx.ALIGN_CENTER_VERTICAL)
displaysizer.Add(first_layer_boxer, pos = (0, 6), flag = wx.ALIGN_CENTER_VERTICAL)
diff -up printrun/settings.py.gtk3 printrun/settings.py
--- printrun/settings.py.gtk3 2015-06-19 05:47:24.000000000 -0400
+++ printrun/settings.py 2015-08-11 23:32:05.603437536 -0400
@@ -145,7 +145,12 @@ class SpinSetting(wxSetting):
def get_specific_widget(self, parent):
from wx.lib.agw.floatspin import FloatSpin
- self.widget = FloatSpin(parent, -1, min_val = self.min, max_val = self.max, digits = 0)
+ import wx
+ if wx.VERSION < (3, 0):
+ self.widget = FloatSpin(parent, -1, min_val = self.min, max_val = self.max, digits = 0)
+ else:
+ self.widget = wx.SpinCtrlDouble(parent, -1, min = self.min, max = self.max)
+ self.widget.SetDigits(0)
self.widget.SetValue(self.value)
orig = self.widget.GetValue
self.widget.GetValue = lambda: int(orig())
@@ -155,7 +160,12 @@ class FloatSpinSetting(SpinSetting):
def get_specific_widget(self, parent):
from wx.lib.agw.floatspin import FloatSpin
- self.widget = FloatSpin(parent, -1, value = self.value, min_val = self.min, max_val = self.max, increment = self.increment, digits = 2)
+ import wx
+ if wx.VERSION < (3, 0):
+ self.widget = FloatSpin(parent, -1, value = self.value, min_val = self.min, max_val = self.max, increment = self.increment, digits = 2)
+ else:
+ self.widget = wx.SpinCtrlDouble(parent, -1, initial = self.value, min = self.min, max = self.max, inc = self.increment)
+ self.widget.SetDigits(2)
return self.widget
class BooleanSetting(wxSetting):
@@ -216,7 +226,12 @@ class BuildDimensionsSetting(wxSetting):
import wx
build_dimensions = parse_build_dimensions(self.value)
self.widgets = []
- w = lambda val, m, M: self.widgets.append(FloatSpin(parent, -1, value = val, min_val = m, max_val = M, digits = 2))
+ def w(val, m, M):
+ if wx.VERSION < (3, 0):
+ self.widgets.append(FloatSpin(parent, -1, value = val, min_val = m, max_val = M, digits = 2))
+ else:
+ self.widgets.append(wx.SpinCtrlDouble(parent, -1, initial = val, min = m, max = M))
+ self.widgets[-1].SetDigits(2)
addlabel = lambda name, pos: self.widget.Add(wx.StaticText(parent, -1, name), pos = pos, flag = wx.ALIGN_CENTER_VERTICAL | wx.RIGHT, border = 5)
addwidget = lambda *pos: self.widget.Add(self.widgets[-1], pos = pos, flag = wx.RIGHT, border = 5)
self.widget = wx.GridBagSizer()