Blob Blame History Raw
--- Python-2.7.4/Modules/Setup.dist.rhconfig	2013-04-06 16:02:34.000000000 +0200
+++ Python-2.7.4/Modules/Setup.dist	2013-04-08 10:05:16.369985654 +0200
@@ -153,7 +153,7 @@ GLHACK=-Dclear=__GLclear
 # modules are to be built as shared libraries (see above for more
 # detail; also note that *static* reverses this effect):
 
-#*shared*
+*shared*
 
 # GNU readline.  Unlike previous Python incarnations, GNU readline is
 # now incorporated in an optional module, configured in the Setup file
@@ -163,77 +163,77 @@ GLHACK=-Dclear=__GLclear
 # it, depending on your system -- see the GNU readline instructions.
 # It's okay for this to be a shared library, too.
 
-#readline readline.c -lreadline -ltermcap
+readline readline.c -lreadline -ltermcap
 
 
 # Modules that should always be present (non UNIX dependent):
 
-#array arraymodule.c	# array objects
-#cmath cmathmodule.c _math.c # -lm # complex math library functions
-#math mathmodule.c _math.c # -lm # math library functions, e.g. sin()
-#_struct _struct.c	# binary structure packing/unpacking
-#time timemodule.c # -lm # time operations and variables
-#operator operator.c	# operator.add() and similar goodies
-#_testcapi _testcapimodule.c    # Python C API test module
-#_random _randommodule.c	# Random number generator
-#_collections _collectionsmodule.c # Container types
+array arraymodule.c	# array objects
+cmath cmathmodule.c _math.c # -lm # complex math library functions
+math mathmodule.c _math.c # -lm # math library functions, e.g. sin()
+_struct _struct.c	# binary structure packing/unpacking
+time timemodule.c # -lm # time operations and variables
+operator operator.c	# operator.add() and similar goodies
+_testcapi _testcapimodule.c    # Python C API test module
+_random _randommodule.c	# Random number generator
+_collections _collectionsmodule.c # Container types
 #_heapq _heapqmodule.c		# Heapq type
-#itertools itertoolsmodule.c	# Functions creating iterators for efficient looping 
-#strop stropmodule.c		# String manipulations
-#_functools _functoolsmodule.c	# Tools for working with functions and callable objects
+itertools itertoolsmodule.c	# Functions creating iterators for efficient looping 
+strop stropmodule.c		# String manipulations
+_functools _functoolsmodule.c	# Tools for working with functions and callable objects
 #_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c	# elementtree accelerator
 #_pickle _pickle.c	# pickle accelerator
 #datetime datetimemodule.c	# date/time type
-#_bisect _bisectmodule.c	# Bisection algorithms
+_bisect _bisectmodule.c	# Bisection algorithms
 
-#unicodedata unicodedata.c    # static Unicode character database
+unicodedata unicodedata.c    # static Unicode character database
 
 # access to ISO C locale support
-#_locale _localemodule.c  # -lintl
+_locale _localemodule.c  # -lintl
 
 # Standard I/O baseline
 #_io -I$(srcdir)/Modules/_io _io/bufferedio.c _io/bytesio.c _io/fileio.c _io/iobase.c _io/_iomodule.c _io/stringio.c _io/textio.c
 
 
 # Modules with some UNIX dependencies -- on by default:
 # (If you have a really backward UNIX, select and socket may not be
 # supported...)
 
-#fcntl fcntlmodule.c	# fcntl(2) and ioctl(2)
-#spwd spwdmodule.c		# spwd(3) 
-#grp grpmodule.c		# grp(3)
-#select selectmodule.c	# select(2); not on ancient System V
+fcntl fcntlmodule.c	# fcntl(2) and ioctl(2)
+spwd spwdmodule.c		# spwd(3) 
+grp grpmodule.c		# grp(3)
+select selectmodule.c	# select(2); not on ancient System V
 
 # Memory-mapped files (also works on Win32).
-#mmap mmapmodule.c
+mmap mmapmodule.c
 
 # CSV file helper
-#_csv _csv.c
+_csv _csv.c
 
 # Socket module helper for socket(2)
-#_socket socketmodule.c timemodule.c
+_socket socketmodule.c timemodule.c
 
 # Socket module helper for SSL support; you must comment out the other
 # socket line above, and possibly edit the SSL variable:
 #SSL=/usr/local/ssl
-#_ssl _ssl.c \
-#	-DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
-#	-L$(SSL)/lib -lssl -lcrypto
+_ssl _ssl.c \
+	-DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
+	-L$(SSL)/lib -lssl -lcrypto
 
 # The crypt module is now disabled by default because it breaks builds
 # on many systems (where -lcrypt is needed), e.g. Linux (I believe).
 #
 # First, look at Setup.config; configure may have set this for you.
 
-#crypt cryptmodule.c # -lcrypt	# crypt(3); needs -lcrypt on some systems
+crypt cryptmodule.c # -lcrypt	# crypt(3); needs -lcrypt on some systems
 
 
 # Some more UNIX dependent modules -- off by default, since these
 # are not supported by all UNIX systems:
 
-#nis nismodule.c -lnsl	# Sun yellow pages -- not everywhere
-#termios termios.c	# Steen Lumholt's termios module
-#resource resource.c	# Jeremy Hylton's rlimit interface
+nis nismodule.c -lnsl	# Sun yellow pages -- not everywhere
+termios termios.c	# Steen Lumholt's termios module
+resource resource.c	# Jeremy Hylton's rlimit interface
 
 
 # Multimedia modules -- off by default.
@@ -238,8 +238,8 @@ GLHACK=-Dclear=__GLclear
 # #993173 says audioop works on 64-bit platforms, though.
 # These represent audio samples or images as strings:
 
-#audioop audioop.c	# Operations on audio samples
-#imageop imageop.c	# Operations on images
+audioop audioop.c	# Operations on audio samples
+imageop imageop.c	# Operations on images
 
 
 # Note that the _md5 and _sha modules are normally only built if the
@@ -249,14 +249,14 @@ GLHACK=-Dclear=__GLclear
 # Message-Digest Algorithm, described in RFC 1321.  The necessary files
 # md5.c and md5.h are included here.
 
-#_md5 md5module.c md5.c
+_md5 md5module.c md5.c
 
 
 # The _sha module implements the SHA checksum algorithms.
 # (NIST's Secure Hash Algorithms.)
-#_sha shamodule.c
-#_sha256 sha256module.c
-#_sha512 sha512module.c
+_sha shamodule.c
+_sha256 sha256module.c
+_sha512 sha512module.c
 
 
 # SGI IRIX specific modules -- off by default.
@@ -303,12 +303,12 @@ GLHACK=-Dclear=__GLclear
 # A Linux specific module -- off by default; this may also work on 
 # some *BSDs.
 
-#linuxaudiodev linuxaudiodev.c
+linuxaudiodev linuxaudiodev.c
 
 
 # George Neville-Neil's timing module:
 
-#timing timingmodule.c
+timing timingmodule.c
 
 
 # The _tkinter module.
@@ -323,7 +323,7 @@ GLHACK=-Dclear=__GLclear
 # every system.
 
 # *** Always uncomment this (leave the leading underscore in!):
-# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
+_tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
 # *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
 #	-L/usr/local/lib \
 # *** Uncomment and edit to reflect where your Tcl/Tk headers are:
@@ -333,7 +333,7 @@ GLHACK=-Dclear=__GLclear
 # *** Or uncomment this for Solaris:
 #	-I/usr/openwin/include \
 # *** Uncomment and edit for Tix extension only:
-#	-DWITH_TIX -ltix8.1.8.2 \
+	-DWITH_TIX -ltix \
 # *** Uncomment and edit for BLT extension only:
 #	-DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
 # *** Uncomment and edit for PIL (TkImaging) extension only:
@@ -342,7 +342,7 @@ GLHACK=-Dclear=__GLclear
 # *** Uncomment and edit for TOGL extension only:
 #	-DWITH_TOGL togl.c \
 # *** Uncomment and edit to reflect your Tcl/Tk versions:
-#	-ltk8.2 -ltcl8.2 \
+	-ltk -ltcl \
 # *** Uncomment and edit to reflect where your X11 libraries are:
 #	-L/usr/X11R6/lib \
 # *** Or uncomment this for Solaris:
@@ -352,7 +352,7 @@ GLHACK=-Dclear=__GLclear
 # *** Uncomment for AIX:
 #	-lld \
 # *** Always uncomment this; X11 libraries to link with:
-#	-lX11
+	-lX11
 
 # Lance Ellinghaus's syslog module
 #syslog syslogmodule.c		# syslog daemon interface
@@ -374,7 +374,7 @@ GLHACK=-Dclear=__GLclear
 # it is a highly experimental and dangerous device for calling
 # *arbitrary* C functions in *arbitrary* shared libraries:
 
-#dl dlmodule.c
+dl dlmodule.c
 
 
 # Modules that provide persistent dictionary-like semantics.  You will
@@ -397,7 +397,7 @@ GLHACK=-Dclear=__GLclear
 #
 # First, look at Setup.config; configure may have set this for you.
 
-#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
+gdbm gdbmmodule.c -lgdbm
 
 
 # Sleepycat Berkeley DB interface.
@@ -412,11 +412,9 @@ GLHACK=-Dclear=__GLclear
 #
 # Edit the variables DB and DBLIBVERto point to the db top directory
 # and the subdirectory of PORT where you built it.
-#DB=/usr/local/BerkeleyDB.4.0
-#DBLIBVER=4.0
-#DBINC=$(DB)/include
-#DBLIB=$(DB)/lib
-#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER)
+DBINC=/usr/include/libdb
+DBLIB=/usr/lib
+_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb
 
 # Historical Berkeley DB 1.85
 #
@@ -431,14 +430,14 @@ GLHACK=-Dclear=__GLclear
 
 
 # Helper module for various ascii-encoders
-#binascii binascii.c
+binascii binascii.c
 
 # Fred Drake's interface to the Python parser
-#parser parsermodule.c
+parser parsermodule.c
 
 # cStringIO and cPickle
-#cStringIO cStringIO.c
-#cPickle cPickle.c
+cStringIO cStringIO.c
+cPickle cPickle.c
 
 
 # Lee Busby's SIGFPE modules.
@@ -461,7 +460,7 @@ GLHACK=-Dclear=__GLclear
 # Andrew Kuchling's zlib module.
 # This require zlib 1.1.3 (or later).
 # See http://www.gzip.org/zlib/
-#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
+zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
 
 # Interface to the Expat XML parser
 #
@@ -480,14 +479,14 @@ GLHACK=-Dclear=__GLclear
 # Hye-Shik Chang's CJKCodecs
 
 # multibytecodec is required for all the other CJK codec modules
-#_multibytecodec cjkcodecs/multibytecodec.c
+_multibytecodec cjkcodecs/multibytecodec.c
 
-#_codecs_cn cjkcodecs/_codecs_cn.c
-#_codecs_hk cjkcodecs/_codecs_hk.c
-#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
-#_codecs_jp cjkcodecs/_codecs_jp.c
-#_codecs_kr cjkcodecs/_codecs_kr.c
-#_codecs_tw cjkcodecs/_codecs_tw.c
+_codecs_cn cjkcodecs/_codecs_cn.c
+_codecs_hk cjkcodecs/_codecs_hk.c
+_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
+_codecs_jp cjkcodecs/_codecs_jp.c
+_codecs_kr cjkcodecs/_codecs_kr.c
+_codecs_tw cjkcodecs/_codecs_tw.c
 
 # Example -- included for reference only:
 # xx xxmodule.c