# ====================================================== # Conditionals and other variables controlling the build # ====================================================== %global pybasever 3.4 # pybasever without the dot: %global pyshortver 34 %global pylibdir %{_libdir}/python%{pybasever} %global dynload_dir %{pylibdir}/lib-dynload # SOABI is defined in the upstream configure.in from Python-3.2a2 onwards, # for PEP 3149: # http://www.python.org/dev/peps/pep-3149/ # ("configure.in" became "configure.ac" in Python 3.3 onwards, and in # backports) # ABIFLAGS, LDVERSION and SOABI are in the upstream Makefile # With Python 3.3, we lose the "u" suffix due to PEP 393 %global ABIFLAGS_optimized m %global ABIFLAGS_debug dm %global LDVERSION_optimized %{pybasever}%{ABIFLAGS_optimized} %global LDVERSION_debug %{pybasever}%{ABIFLAGS_debug} %global SOABI_optimized cpython-%{pyshortver}%{ABIFLAGS_optimized} %global SOABI_debug cpython-%{pyshortver}%{ABIFLAGS_debug} # All bytecode files are now in a __pycache__ subdirectory, with a name # reflecting the version of the bytecode (to permit sharing of python libraries # between different runtimes) # See http://www.python.org/dev/peps/pep-3147/ # For example, # foo/bar.py # now has bytecode at: # foo/__pycache__/bar.cpython-34.pyc # foo/__pycache__/bar.cpython-34.pyo %global bytecode_suffixes .cpython-34.py? # Python's configure script defines SOVERSION, and this is used in the Makefile # to determine INSTSONAME, the name of the libpython DSO: # LDLIBRARY='libpython$(VERSION).so' # INSTSONAME="$LDLIBRARY".$SOVERSION # We mirror this here in order to make it easier to add the -gdb.py hooks. # (if these get out of sync, the payload of the libs subpackage will fail # and halt the build) %global py_SOVERSION 1.0 %global py_INSTSONAME_optimized libpython%{LDVERSION_optimized}.so.%{py_SOVERSION} %global py_INSTSONAME_debug libpython%{LDVERSION_debug}.so.%{py_SOVERSION} %global with_debug_build 0 %global with_gdb_hooks 1 %global with_systemtap 1 # some arches don't have valgrind so we need to disable its support on them %ifnarch s390 %global with_valgrind 1 %else %global with_valgrind 0 %endif %global with_gdbm 1 # Change from yes to no to turn this off %global with_computed_gotos yes # Turn this to 0 to turn off the "check" phase: %global run_selftest_suite 1 # We want to byte-compile the .py files within the packages using the new # python3 binary. # # Unfortunately, rpmbuild's infrastructure requires us to jump through some # hoops to avoid byte-compiling with the system python 2 version: # /usr/lib/rpm/redhat/macros sets up build policy that (amongst other things) # defines __os_install_post. In particular, "brp-python-bytecompile" is # invoked without an argument thus using the wrong version of python # (/usr/bin/python, rather than the freshly built python), thus leading to # numerous syntax errors, and incorrect magic numbers in the .pyc files. We # thus override __os_install_post to avoid invoking this script: %global __os_install_post /usr/lib/rpm/brp-compress \ %{!?__debug_package:/usr/lib/rpm/brp-strip %{__strip}} \ /usr/lib/rpm/brp-strip-static-archive %{__strip} \ /usr/lib/rpm/brp-strip-comment-note %{__strip} %{__objdump} \ /usr/lib/rpm/brp-python-hardlink # to remove the invocation of brp-python-bytecompile, whilst keeping the # invocation of brp-python-hardlink (since this should still work for python3 # pyc/pyo files) # We need to get a newer configure generated out of configure.in for the following # patches: # patch 55 (systemtap) # patch 113 (more config flags) # # For patch 55 (systemtap), we need to get a new header for configure to use # # configure.in requires autoconf-2.65, but the version in Fedora is currently # autoconf-2.66 # # For now, we'll generate a patch to the generated configure script and # pyconfig.h.in on a machine that has a local copy of autoconf 2.65 # # Instructions on obtaining such a copy can be seen at # http://bugs.python.org/issue7997 # # To make it easy to regenerate the patch, this specfile can be run in two # ways: # (i) regenerate_autotooling_patch 0 : the normal approach: prep the # source tree using a pre-generated patch to the "configure" script, and do a # full build # (ii) regenerate_autotooling_patch 1 : intended to be run on a developer's # workstation: prep the source tree without patching configure, then rerun a # local copy of autoconf-2.65, regenerate the patch, then exit, without doing # the rest of the build %global regenerate_autotooling_patch 0 # ================== # Top-level metadata # ================== Summary: Version 3.4 of the Python programming language Name: python%{pyshortver} Version: %{pybasever}.3 Release: 11%{?dist} License: Python Group: Development/Languages # ======================= # Build-time requirements # ======================= # (keep this list alphabetized) BuildRequires: autoconf BuildRequires: bluez-libs-devel BuildRequires: bzip2 BuildRequires: bzip2-devel BuildRequires: db4-devel >= 4.7 # expat 2.1.0 added the symbol XML_SetHashSalt without bumping SONAME. We use # it (in pyexpat) in order to enable the fix in Python-3.2.3 for CVE-2012-0876: BuildRequires: expat-devel >= 2.1.0 BuildRequires: findutils BuildRequires: gcc-c++ %if %{with_gdbm} BuildRequires: gdbm-devel %endif BuildRequires: glibc-devel BuildRequires: gmp-devel BuildRequires: libffi-devel BuildRequires: libGL-devel BuildRequires: libX11-devel BuildRequires: ncurses-devel # workaround http://bugs.python.org/issue19804 (test_uuid requires ifconfig) BuildRequires: net-tools BuildRequires: openssl-devel BuildRequires: pkgconfig BuildRequires: readline-devel BuildRequires: sqlite-devel %if 0%{?with_systemtap} BuildRequires: systemtap-sdt-devel # (this introduces a dependency on "python", in that systemtap-sdt-devel's # /usr/bin/dtrace is a python 2 script) %global tapsetdir /usr/share/systemtap/tapset %endif # with_systemtap BuildRequires: tar BuildRequires: tcl-devel BuildRequires: tix-devel BuildRequires: tk-devel %if 0%{?with_valgrind} BuildRequires: valgrind-devel %endif BuildRequires: xz-devel BuildRequires: zlib-devel Requires: expat >= 2.1.0 BuildRequires: python-rpm-macros # ======================= # Source code and patches # ======================= Source: http://www.python.org/ftp/python/%{version}/Python-%{version}.tar.xz # Avoid having various bogus auto-generated Provides lines for the various # python c modules' SONAMEs: Source1: find-provides-without-python-sonames.sh %global _use_internal_dependency_generator 0 %global __find_provides %{SOURCE1} # Supply an RPM macro "py_byte_compile" for the python3-devel subpackage # to enable specfiles to selectively byte-compile individual files and paths # with different Python runtimes as necessary: Source3: macros.pybytecompile%{pybasever} # Systemtap tapset to make it easier to use the systemtap static probes # (actually a template; LIBRARY_PATH will get fixed up during install) # Written by dmalcolm; not yet sent upstream Source5: libpython.stp # Example systemtap script using the tapset # Written by wcohen, mjw, dmalcolm; not yet sent upstream Source6: systemtap-example.stp # Another example systemtap script that uses the tapset # Written by dmalcolm; not yet sent upstream Source7: pyfuntop.stp # A simple script to check timestamps of bytecode files # Run in check section with Python that is currently being built # Written by bkabrda Source8: check-pyc-and-pyo-timestamps.py # Fixup distutils/unixccompiler.py to remove standard library path from rpath: # Was Patch0 in ivazquez' python3000 specfile: Patch1: Python-3.1.1-rpath.patch # Some tests were removed due to audiotest.au not being packaged. This was # however added to the archive in 3.3.1, so we no longer delete the tests. # Patch3: 00003-remove-mimeaudio-tests.patch # 00055 # # Systemtap support: add statically-defined probe points # Patch sent upstream as http://bugs.python.org/issue14776 # with some subsequent reworking to cope with LANG=C in an rpmbuild # (where sys.getfilesystemencoding() == 'ascii') Patch55: 00055-systemtap.patch Patch102: 00102-lib64.patch # 00104 # # Only used when "%{_lib}" == "lib64" # Another lib64 fix, for distutils/tests/test_install.py; not upstream: Patch104: 00104-lib64-fix-for-test_install.patch # 00111 # # Patch the Makefile.pre.in so that the generated Makefile doesn't try to build # a libpythonMAJOR.MINOR.a (bug 550692): # Downstream only: not appropriate for upstream Patch111: 00111-no-static-lib.patch # 00112 # # Patch112: python-2.7rc1-debug-build.patch: this is not relevant to Python 3, # for 3.2 onwards # 00113 # # Add configure-time support for the COUNT_ALLOCS and CALL_PROFILE options # described at http://svn.python.org/projects/python/trunk/Misc/SpecialBuilds.txt # so that if they are enabled, they will be in that build's pyconfig.h, so that # extension modules will reliably use them # Not yet sent upstream Patch113: 00113-more-configuration-flags.patch # 00114 # # Upstream as of Python 3.4.0.b2 # Patch114: 00114-statvfs-f_flag-constants.patch # 00125 # # COUNT_ALLOCS is useful for debugging, but the upstream behaviour of always # emitting debug info to stdout on exit is too verbose and makes it harder to # use the debug build. Add a "PYTHONDUMPCOUNTS" environment variable which # must be set to enable the output on exit # Not yet sent upstream Patch125: 00125-less-verbose-COUNT_ALLOCS.patch # 00130 # # Python 2's: # Patch130: python-2.7.2-add-extension-suffix-to-python-config.patch # is not relevant to Python 3 (for 3.2 onwards) # 00131 # # The four tests in test_io built on top of check_interrupted_write_retry # fail when built in Koji, for ppc and ppc64; for some reason, the SIGALRM # handlers are never called, and the call to write runs to completion # (rhbz#732998) Patch131: 00131-disable-tests-in-test_io.patch # 00132 # # Add non-standard hooks to unittest for use in the "check" phase below, when # running selftests within the build: # @unittest._skipInRpmBuild(reason) # for tests that hang or fail intermittently within the build environment, and: # @unittest._expectedFailureInRpmBuild # for tests that always fail within the build environment # # The hooks only take effect if WITHIN_PYTHON_RPM_BUILD is set in the # environment, which we set manually in the appropriate portion of the "check" # phase below (and which potentially other python-* rpms could set, to reuse # these unittest hooks in their own "check" phases) Patch132: 00132-add-rpmbuild-hooks-to-unittest.patch # 00133 # # 00133-skip-test_dl.patch is not relevant for python3: the "dl" module no # longer exists # 00134 # # Fix a failure in test_sys.py when configured with COUNT_ALLOCS enabled # Not yet sent upstream Patch134: 00134-fix-COUNT_ALLOCS-failure-in-test_sys.patch # 00135 # # test_weakref's test_callback_in_cycle_resurrection doesn't work with # COUNT_ALLOCS, as the metrics keep "C" alive. Work around this for our # debug build: # Not yet sent upstream Patch135: 00135-fix-test-within-test_weakref-in-debug-build.patch # 00136 # # Patch136: 00136-skip-tests-of-seeking-stdin-in-rpmbuild.patch does not seem # to be needed by python3 # 00137 # # Some tests within distutils fail when run in an rpmbuild: Patch137: 00137-skip-distutils-tests-that-fail-in-rpmbuild.patch # 00138 # # Patch138: 00138-fix-distutils-tests-in-debug-build.patch is not relevant for # python3 # 00139 # # ARM-specific: skip known failure in test_float: # http://bugs.python.org/issue8265 (rhbz#706253) Patch139: 00139-skip-test_float-known-failure-on-arm.patch # ideally short lived patch disabling a test thats fragile on different arches Patch140: python3-arm-skip-failing-fragile-test.patch # Patch140: 00140-skip-test_ctypes-known-failure-on-sparc.patch does not appear # to be relevant for python3 # 00141 # # Fix tests for case when tests for case when configured with # COUNT_ALLOCS (debug build): http://bugs.python.org/issue19527 # Applies to: test_gc, test_module, test_io, test_logging, test_warnings, # test_threading Patch141: 00141-fix-tests_with_COUNT_ALLOCS.patch # 00143 # # Fix the --with-tsc option on ppc64, and rework it on 32-bit ppc to avoid # aliasing violations (rhbz#698726) # Sent upstream as http://bugs.python.org/issue12872 Patch143: 00143-tsc-on-ppc.patch # 00144 # # (Optionally) disable the gdbm module: # python.spec's # Patch144: 00144-no-gdbm.patch # is not needed in python3.spec # 00145 # # python.spec's # Patch145: 00145-force-sys-platform-to-be-linux2.patch # is upstream for Python 3 as of 3.2.2 # 00146 # # Support OpenSSL FIPS mode (e.g. when OPENSSL_FORCE_FIPS_MODE=1 is set) # - handle failures from OpenSSL (e.g. on attempts to use MD5 in a # FIPS-enforcing environment) # - add a new "usedforsecurity" keyword argument to the various digest # algorithms in hashlib so that you can whitelist a callsite with # "usedforsecurity=False" # (sent upstream for python 3 as http://bugs.python.org/issue9216 ; see RHEL6 # python patch 119) # - enforce usage of the _hashlib implementation: don't fall back to the _md5 # and _sha* modules (leading to clearer error messages if fips selftests # fail) # - don't build the _md5 and _sha* modules; rely on the _hashlib implementation # of hashlib # (rhbz#563986) # Note: Up to Python 3.4.0.b1, upstream had their own implementation of what # they assumed would become sha3. This patch was adapted to give it the # usedforsecurity argument, even though it did nothing (OpenSSL didn't have # sha3 implementation at that time).In 3.4.0.b2, sha3 implementation was reverted # (see http://bugs.python.org/issue16113), but the alterations were left in the # patch, since they may be useful again if upstream decides to rerevert sha3 # implementation and OpenSSL still doesn't support it. For now, they're harmless. Patch146: 00146-hashlib-fips.patch # 00147 # # Add a sys._debugmallocstats() function # Sent upstream as http://bugs.python.org/issue14785 # Upstream as of Python 3.3.0 # Patch147: 00147-add-debug-malloc-stats.patch # 00148 # # Upstream as of Python 3.2.3: # Patch148: 00148-gdbm-1.9-magic-values.patch # 00149 # # Upstream as of Python 3.2.3: # Patch149: 00149-backport-issue11254-pycache-bytecompilation-fix.patch # 00150 # # temporarily disable rAssertAlmostEqual in test_cmath on PPC (bz #750811) # caused by a glibc bug. This patch can be removed when we have a glibc with # the patch mentioned here: # http://sourceware.org/bugzilla/show_bug.cgi?id=13472 Patch150: 00150-disable-rAssertAlmostEqual-cmath-on-ppc.patch # 00151 # # python.spec had: # Patch151: 00151-fork-deadlock.patch # 00152 # # Fix a regex in test_gdb so that it doesn't choke when gdb provides a full # path to Python/bltinmodule.c: # Committed upstream as 77824:abcd29c9a791 as part of fix for # http://bugs.python.org/issue12605 # Patch152: 00152-fix-test-gdb-regex.patch # 00153 # # Strip out lines of the form "warning: Unable to open ..." from gdb's stderr # when running test_gdb.py; also cope with change to gdb in F17 onwards in # which values are printed as "v@entry" rather than just "v": # Not yet sent upstream # Upstream as of 3.4.3 # Patch153: 00153-fix-test_gdb-noise.patch # 00154 # # python3.spec on f15 has: # Patch154: 00154-skip-urllib-test-requiring-working-DNS.patch # 00155 # # Avoid allocating thunks in ctypes unless absolutely necessary, to avoid # generating SELinux denials on "import ctypes" and "import uuid" when # embedding Python within httpd (rhbz#814391) Patch155: 00155-avoid-ctypes-thunks.patch # 00156 # # Recent builds of gdb will only auto-load scripts from certain safe # locations. Turn off this protection when running test_gdb in the selftest # suite to ensure that it can load our -gdb.py script (rhbz#817072): # Upsream as of 3.4.3 # Patch156: 00156-gdb-autoload-safepath.patch # 00157 # # Update uid/gid handling throughout the standard library: uid_t and gid_t are # unsigned 32-bit values, but existing code often passed them through C long # values, which are signed 32-bit values on 32-bit architectures, leading to # negative int objects for uid/gid values >= 2^31 on 32-bit architectures. # # Introduce _PyObject_FromUid/Gid to convert uid_t/gid_t values to python # objects, using int objects where the value will fit (long objects otherwise), # and _PyArg_ParseUid/Gid to convert int/long to uid_t/gid_t, with -1 allowed # as a special case (since this is given special meaning by the chown syscall) # # Update standard library to use this throughout for uid/gid values, so that # very large uid/gid values are round-trippable, and -1 remains usable. # (rhbz#697470) Patch157: 00157-uid-gid-overflows.patch # 00158 # # Upstream as of Python 3.3.1 # 00159 # # Patch159: 00159-correct-libdb-include-path.patch # in python.spec # TODO: python3 status? # 00160 # # Python 3.3 added os.SEEK_DATA and os.SEEK_HOLE, which may be present in the # header files in the build chroot, but may not be supported in the running # kernel, hence we disable this test in an rpm build. # Adding these was upstream issue http://bugs.python.org/issue10142 # Not yet sent upstream Patch160: 00160-disable-test_fs_holes-in-rpm-build.patch # 00161 # # (Was only needed for Python 3.3.0b1) # 00162 # # (Was only needed for Python 3.3.0b1) # 00163 # # Some tests within test_socket fail intermittently when run inside Koji; # disable them using unittest._skipInRpmBuild # Not yet sent upstream Patch163: 00163-disable-parts-of-test_socket-in-rpm-build.patch # 0164 # # some tests in test._io interrupted_write-* fail on PPC (rhbz#846849) # testChainingDescriptors test in test_exceptions fails on PPc, too (rhbz#846849) # disable those tests so that rebuilds on PPC can continue Patch164: 00164-disable-interrupted_write-tests-on-ppc.patch # 00165 # # python.spec has: # Patch165: 00165-crypt-module-salt-backport.patch # which is a backport from 3.3 and thus not relevant to "python3" # 00166 # # Patch166: 00166-fix-fake-repr-in-gdb-hooks.patch # in python.spec # TODO: python3 status? # 00167 # # Patch167: 00167-disable-stack-navigation-tests-when-optimized-in-test_gdb.patch # in python.spec # TODO: python3 status? # 00168 # # Patch168: 00168-distutils-cflags.patch # in python.spec # TODO: python3 status? # 00169 # # Patch169: 00169-avoid-implicit-usage-of-md5-in-multiprocessing.patch # in python.spec # TODO: python3 status? # 00170 # # In debug builds, try to print repr() when a C-level assert fails in the # garbage collector (typically indicating a reference-counting error # somewhere else e.g in an extension module) # Backported to 2.7 from a patch I sent upstream for py3k # http://bugs.python.org/issue9263 (rhbz#614680) # hiding the proposed new macros/functions within gcmodule.c to avoid exposing # them within the extension API. # (rhbz#850013 Patch170: 00170-gc-assertions.patch # 00171 # # python.spec had: # Patch171: 00171-raise-correct-exception-when-dev-urandom-is-missing.patch # TODO: python3 status? # 00172 # # python.spec had: # Patch172: 00172-use-poll-for-multiprocessing-socket-connection.patch # TODO: python3 status? # 00173 # # Workaround for ENOPROTOOPT seen in Koji withi test.support.bind_port() # (rhbz#913732) Patch173: 00173-workaround-ENOPROTOOPT-in-bind_port.patch # 00174 # # Patch174: 00174-fix-for-usr-move.patch # TODO: python3 status? # 00175 # # Upstream as of Python 3.3.2 # Patch175: 00175-fix-configure-Wformat.patch # 00176 # # Fixed upstream as of Python 3.3.1 # Patch176: 00176-upstream-issue16754-so-extension.patch # 00177 # # Fixed upstream as of Python 3.4.0.b2 # Patch177: 00177-platform-unicode.patch # 00178 # # Don't duplicate various FLAGS in sysconfig values # http://bugs.python.org/issue17679 # Does not affect python2 AFAICS (different sysconfig values initialization) Patch178: 00178-dont-duplicate-flags-in-sysconfig.patch # 00179 # # Workaround for https://bugzilla.redhat.com/show_bug.cgi?id=951802 # Reported upstream in http://bugs.python.org/issue17737 # This patch basically looks at every frame and if it is somehow corrupted, # it just stops printing the traceback - it doesn't fix the actual bug. # This bug seems to only affect ARM. # Doesn't seem to affect Python 2 AFAICS. Patch179: 00179-dont-raise-error-on-gdb-corrupted-frames-in-backtrace.patch # 00180 # # Enable building on ppc64p7 # Not appropriate for upstream, Fedora-specific naming Patch180: 00180-python-add-support-for-ppc64p7.patch # 00181 # # python.spec has # Patch181: 00181-allow-arbitrary-timeout-in-condition-wait.patch # Does not affect python3 # 00182 # # Fixed upstream as of Python 3.3.2 # Patch182: 00182-fix-test_gdb-test_threads.patch # 00183 # # Fixed upstream as of Python 3.4.0a4 # Patch183: 00183-cve-2013-2099-fix-ssl-match_hostname-dos.patch # 00184 # # Fix for https://bugzilla.redhat.com/show_bug.cgi?id=979696 # Fixes build of ctypes against libffi with multilib wrapper # Python recognizes ffi.h only if it contains "#define LIBFFI_H", # but the wrapper doesn't contain that, which makes the build fail # We patch this by also accepting "#define ffi_wrapper_h" Patch184: 00184-ctypes-should-build-with-libffi-multilib-wrapper.patch # 00185 # # Fixed upstream as of Python 3.4.0a4 # Patch185: 00185-CVE-2013-4238-hostname-check-bypass-in-SSL-module.patch # 00186 # # Fix for https://bugzilla.redhat.com/show_bug.cgi?id=1023607 # Previously, this fixed a problem where some *.py files were not being # bytecompiled properly during build. This was result of py_compile.compile # raising exception when trying to convert test file with bad encoding, and # thus not continuing bytecompilation for other files. # This was fixed upstream, but the test hasn't been merged yet, so we keep it Patch186: 00186-dont-raise-from-py_compile.patch # 00187 # # Fixed upstream as of Python 3.4.0b1 # Patch187: 00187-remove-pthread-atfork.patch # 00188 # # Downstream only patch that should be removed when we compile all guaranteed # hashlib algorithms properly. The problem is this: # - during tests, test_hashlib is imported and executed before test_lib2to3 # - if at least one hash function has failed, trying to import it triggers an # exception that is being caught and exception is logged: # http://hg.python.org/cpython/file/2de806c8b070/Lib/hashlib.py#l217 # - logging the exception makes logging module run basicConfig # - when lib2to3 tests are run again, lib2to3 runs basicConfig again, which # doesn't do anything, because it was run previously # (logging.root.handlers != []), which means that the default setup # (most importantly logging level) is not overriden. That means that a test # relying on this will fail (test_filename_changing_on_output_single_dir) Patch188: 00188-fix-lib2to3-tests-when-hashlib-doesnt-compile-properly.patch # 00190 # # # Fix tests with SQLite >= 3.8.4 # http://bugs.python.org/issue20901 # http://hg.python.org/cpython/rev/4d626a9df062 # FIXED UPSTREAM # Patch190: 00190-fix-tests-with-sqlite-3.8.4.patch # 00193 # # Skip correct number of *.pyc file bytes in ModuleFinder.load_module # rhbz#1060338 # http://bugs.python.org/issue20778 # FIXED UPSTREAM # Patch193: 00193-skip-correct-num-of-pycfile-bytes-in-modulefinder.patch # Tests requiring SIGHUP to work don't work in Koji # see rhbz#1088233 Patch194: temporarily-disable-tests-requiring-SIGHUP.patch # 00195 # # Don't declare Werror=declaration-after-statement for extension # modules through setup.py # http://bugs.python.org/issue21121 # FIXED UPSTREAM # Patch195: 00195-dont-add-Werror-declaration-after-statement.patch # 00196 # # Fix test_gdb failure on ppc64le Patch196: 00196-test-gdb-match-addr-before-builtin.patch # 00197 # # The CGIHTTPServer Python module did not properly handle URL-encoded # path separators in URLs. This may have enabled attackers to disclose a CGI # script's source code or execute arbitrary scripts in the server's # document root. # FIXED UPSTREAM # Patch197: 00197-fix-CVE-2014-4650.patch # OpenSSL disabled SSLv3 in SSLv23 method # This patch alters python tests to reflect this change # Issue: http://bugs.python.org/issue22638 Upstream discussion about SSLv3 in Python Patch199: 00199-alter-tests-to-reflect-sslv3-disabled.patch # 00200 # # Fix for gettext plural form headers (lines that begin with "#") # Note: Backported from scl Patch200: 00200-gettext-plural-fix.patch # 00201 # # Fixes memory leak in gdbm module (rhbz#977308) # This was upstreamed as a part of bigger patch, but for our purposes # this is ok: http://bugs.python.org/issue18404 # Note: Backported from scl Patch201: 00201-fix-memory-leak-in-gdbm.patch # 00202 # # Fixes undefined behaviour in faulthandler which caused test to hang on x86_64 # http://bugs.python.org/issue23433 Patch202: 00202-fix-undefined-behaviour-in-faulthandler.patch # test_threading fails in koji dues to it's handling of signals Patch203: 00203-disable-threading-test-koji.patch # openssl requires DH keys to be > 768bits Patch204: 00204-increase-dh-keys-size.patch # 00209 # # CVE-2016-5636: http://seclists.org/oss-sec/2016/q2/560 # rhbz#1345859: https://bugzilla.redhat.com/show_bug.cgi?id=1345859 # https://hg.python.org/cpython/rev/10dad6da1b28/ # https://hg.python.org/cpython/rev/5533a9e02b21 # Fix possible integer overflow and heap corruption in zipimporter.get_data() # FIXED UPSTREAM: https://bugs.python.org/issue26171 Patch209: 00209-CVE-2016-5636-buffer-overflow-in-zipimport-module-fix.patch # 00210 # # CVE-2016-0772 python: smtplib StartTLS stripping attack # rhbz#1303647: https://bugzilla.redhat.com/show_bug.cgi?id=1303647 # rhbz#1346345: https://bugzilla.redhat.com/show_bug.cgi?id=1346345 # FIXED UPSTREAM: https://hg.python.org/cpython/rev/d590114c2394 # Raise an error when STARTTLS fails Patch210: 00210-Raise-an-error-when-STARTTLS-fails.patch # 00211 # # CVE-2016-5699 python: http protocol steam injection attack # https://bugzilla.redhat.com/show_bug.cgi?id=1303699 # FIXED UPSTREAM: https://hg.python.org/cpython/rev/bf3e1c9b80e9 # Disabled HTTP header injections in http.client # Resolves: rhbz#1331392 Patch211: 00211-Disabled-HTTP-header-injections-in-http-client.patch # 00212 # # Fix test breakage with version 2.2.0 of Expat # rhbz#1353918: https://bugzilla.redhat.com/show_bug.cgi?id=1353918 # NOT YET FIXED UPSTREAM: http://bugs.python.org/issue27369 Patch212: 00212-fix-test-pyexpat-failure.patch # (New patches go here ^^^) # # When adding new patches to "python" and "python3" in Fedora 17 onwards, # please try to keep the patch numbers in-sync between the two specfiles: # # - use the same patch number across both specfiles for conceptually-equivalent # fixes, ideally with the same name # # - when a patch is relevant to both specfiles, use the same introductory # comment in both specfiles where possible (to improve "diff" output when # comparing them) # # - when a patch is only relevant for one of the two specfiles, leave a gap # in the patch numbering in the other specfile, adding a comment when # omitting a patch, both in the manifest section here, and in the "prep" # phase below # # Hopefully this will make it easier to ensure that all relevant fixes are # applied to both versions. # This is the generated patch to "configure"; see the description of # %{regenerate_autotooling_patch} # above: Patch5000: 05000-autotool-intermediates.patch BuildRoot: %{_tmppath}/%{name}-%{version}-root # ====================================================== # Additional metadata, and subpackages # ====================================================== URL: http://www.python.org/ # We'll not provide this, on purpose # No package in Fedora shall ever depend on this # Provides: python(abi) = %{pybasever} %global __requires_exclude ^python\\(abi\\) = 3\\..$ %global __provides_exclude ^python\\(abi\\) = 3\\..$ %description Python 3.5 package for developers. No security fixes will be applied. # ====================================================== # The prep phase of the build: # ====================================================== %prep %setup -q -n Python-%{version}%{?prerel} chmod +x %{SOURCE1} %if 0%{?with_systemtap} # Provide an example of usage of the tapset: cp -a %{SOURCE6} . cp -a %{SOURCE7} . %endif # with_systemtap # Ensure that we're using the system copy of various libraries, rather than # copies shipped by upstream in the tarball: # Remove embedded copy of expat: rm -r Modules/expat || exit 1 # Remove embedded copy of libffi: for SUBDIR in darwin libffi libffi_arm_wince libffi_msvc libffi_osx ; do rm -r Modules/_ctypes/$SUBDIR || exit 1 ; done # Remove embedded copy of zlib: rm -r Modules/zlib || exit 1 # Don't build upstream Python's implementation of these crypto algorithms; # instead rely on _hashlib and OpenSSL. # # For example, in our builds hashlib.md5 is implemented within _hashlib via # OpenSSL (and thus respects FIPS mode), and does not fall back to _md5 # TODO: there seems to be no OpenSSL support in Python for sha3 so far # when it is there, also remove _sha3/ dir for f in md5module.c sha1module.c sha256module.c sha512module.c; do rm Modules/$f done # # Apply patches: # %patch1 -p1 # 3: upstream as of Python 3.3.1 %if 0%{?with_systemtap} %patch55 -p1 -b .systemtap %endif %if "%{_lib}" == "lib64" %patch102 -p1 %patch104 -p1 %endif %patch111 -p1 # 112: not for python3 %patch113 -p1 # 00114: Upstream as of Python 3.4.0.b2 %patch125 -p1 -b .less-verbose-COUNT_ALLOCS %ifarch ppc %{power64} %patch131 -p1 %endif %patch132 -p1 # 00133: not for python3 %patch134 -p1 %patch135 -p1 # 00136: not for python3 %patch137 -p1 # 00138: not for python3 %ifarch %{arm} %patch139 -p1 %patch140 -p1 %endif # 00140: not for python3 %patch141 -p1 %patch143 -p1 -b .tsc-on-ppc # 00144: not for python3 # 00145: not for python3 %patch146 -p1 # 00147: upstream as of Python 3.3.0 # 00148: upstream as of Python 3.2.3 # 00149: upstream as of Python 3.2.3 %ifarch ppc %{power64} %patch150 -p1 %endif # 00151: not for python3 # 00152: upstream as of Python 3.3.0b2 # 00153: upstream as of Python 3.4.3 # 00154: not for this branch %patch155 -p1 # 00156: upstream as of 3.4.3 %patch157 -p1 #00158: FIXME #00159: FIXME %patch160 -p1 # 00161: was only needed for Python 3.3.0b1 # 00162: was only needed for Python 3.3.0b1 %patch163 -p1 %ifarch ppc %{power64} %patch164 -p1 %endif #00165: TODO #00166: TODO #00167: TODO #00168: TODO #00169: TODO #00170: TODO #00171: TODO #00172: TODO %patch173 -p1 #00174: TODO # 00175: upstream as of Python 3.3.2 # 00176: upstream as of Python 3.3.1 # 00177: upstream as of Python 3.4.0.b2 %patch178 -p1 %patch179 -p1 %patch180 -p1 # 00181: not for python3 # 00182: upstream as of Python 3.3.2 # 00183 upstream as of Python 3.4.0a4 %patch184 -p1 # 00185 upstream as of Python 3.4.0a4 %patch186 -p1 # 00187: upstream as of Python 3.4.0b1 %patch188 -p1 # 00190: upstream as of Python 3.4.1 # 00193: upstream as of Python 3.4.1 %patch194 -p1 # 00195: upstream as of Python 3.4.2 %patch196 -p1 # 00197: upstream as of Python 3.4.2 %patch199 -p1 %patch202 -p1 %patch203 -p1 %patch204 -p1 %patch209 -p1 %patch210 -p1 %patch211 -p1 %patch212 -p1 # Currently (2010-01-15), http://docs.python.org/library is for 2.6, and there # are many differences between 2.6 and the Python 3 library. # # Fix up the URLs within pydoc to point at the documentation for this # MAJOR.MINOR version: # sed --in-place \ --expression="s|http://docs.python.org/library|http://docs.python.org/%{pybasever}/library|g" \ Lib/pydoc.py || exit 1 %if ! 0%{regenerate_autotooling_patch} # Normally we apply the patch to "configure" # We don't apply the patch if we're working towards regenerating it %patch5000 -p0 -b .autotool-intermediates %endif # ====================================================== # Configuring and building the code: # ====================================================== %build topdir=$(pwd) export CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv" export CXXFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv" export CPPFLAGS="`pkg-config --cflags-only-I libffi`" export OPT="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv" export LINKCC="gcc" export CFLAGS="$CFLAGS `pkg-config --cflags openssl`" export LDFLAGS="$RPM_LD_FLAGS `pkg-config --libs-only-L openssl`" %if 0%{regenerate_autotooling_patch} # If enabled, this code regenerates the patch to "configure", using a # local copy of autoconf-2.65, then exits the build # # The following assumes that the copy is installed to ~/autoconf-2.65/bin # as per these instructions: # http://bugs.python.org/issue7997 for f in pyconfig.h.in configure ; do cp $f $f.autotool-intermediates ; done # Rerun the autotools: autoreconf # Regenerate the patch: gendiff . .autotool-intermediates > %{PATCH5000} # Exit the build exit 1 %endif # Define a function, for how to perform a "build" of python for a given # configuration: BuildPython() { ConfName=$1 BinaryName=$2 SymlinkName=$3 ExtraConfigArgs=$4 PathFixWithThisBinary=$5 MoreCFlags=$6 ConfDir=build/$ConfName echo STARTING: BUILD OF PYTHON FOR CONFIGURATION: $ConfName - %{_bindir}/$BinaryName mkdir -p $ConfDir pushd $ConfDir # Use the freshly created "configure" script, but in the directory two above: %global _configure $topdir/configure %configure \ --enable-ipv6 \ --enable-shared \ --with-computed-gotos=%{with_computed_gotos} \ --with-dbmliborder=gdbm:ndbm:bdb \ --with-system-expat \ --with-system-ffi \ --enable-loadable-sqlite-extensions \ %if 0%{?with_systemtap} --with-systemtap \ %endif %if 0%{?with_valgrind} --with-valgrind \ %endif $ExtraConfigArgs \ %{nil} # Set EXTRA_CFLAGS to our CFLAGS (rather than overriding OPT, as we've done # in the past). # This should fix a problem with --with-valgrind where it adds # -DDYNAMIC_ANNOTATIONS_ENABLED=1 # to OPT which must be passed to all compilation units in the build, # otherwise leading to linker errors, e.g. # missing symbol AnnotateRWLockDestroy # # Invoke the build: make EXTRA_CFLAGS="$CFLAGS $MoreCFlags" %{?_smp_mflags} popd echo FINISHED: BUILD OF PYTHON FOR CONFIGURATION: $ConfDir } # Use "BuildPython" to support building with different configurations: %if 0%{?with_debug_build} BuildPython debug \ python-debug \ python%{pybasever}-debug \ %ifarch %{ix86} x86_64 ppc %{power64} "--with-pydebug --with-tsc --with-count-allocs --with-call-profile --without-ensurepip" \ %else "--with-pydebug --with-count-allocs --with-call-profile --without-ensurepip" \ %endif false \ -O0 %endif # with_debug_build BuildPython optimized \ python \ python%{pybasever} \ "--without-ensurepip" \ true # ====================================================== # Installing the built code: # ====================================================== %install topdir=$(pwd) rm -fr %{buildroot} mkdir -p %{buildroot}%{_prefix} %{buildroot}%{_mandir} InstallPython() { ConfName=$1 PyInstSoName=$2 MoreCFlags=$3 ConfDir=build/$ConfName echo STARTING: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName mkdir -p $ConfDir pushd $ConfDir make install DESTDIR=%{buildroot} INSTALL="install -p" EXTRA_CFLAGS="$MoreCFlags" popd # We install a collection of hooks for gdb that make it easier to debug # executables linked against libpython3* (such as /usr/bin/python3 itself) # # These hooks are implemented in Python itself (though they are for the version # of python that gdb is linked with, in this case Python 2.7) # # gdb-archer looks for them in the same path as the ELF file, with a -gdb.py suffix. # We put them in the debuginfo package by installing them to e.g.: # /usr/lib/debug/usr/lib/libpython3.2.so.1.0.debug-gdb.py # # See https://fedoraproject.org/wiki/Features/EasierPythonDebugging for more # information # # Copy up the gdb hooks into place; the python file will be autoloaded by gdb # when visiting libpython.so, provided that the python file is installed to the # same path as the library (or its .debug file) plus a "-gdb.py" suffix, e.g: # /usr/lib/debug/usr/lib64/libpython3.2.so.1.0.debug-gdb.py # (note that the debug path is /usr/lib/debug for both 32/64 bit) # # Initially I tried: # /usr/lib/libpython3.1.so.1.0-gdb.py # but doing so generated noise when ldconfig was rerun (rhbz:562980) # %if 0%{?with_gdb_hooks} DirHoldingGdbPy=%{_prefix}/lib/debug/%{_libdir} PathOfGdbPy=$DirHoldingGdbPy/$PyInstSoName.debug-gdb.py mkdir -p %{buildroot}$DirHoldingGdbPy cp Tools/gdb/libpython.py %{buildroot}$PathOfGdbPy %endif # with_gdb_hooks echo FINISHED: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName } # Use "InstallPython" to support building with different configurations: # Install the "debug" build first, so that we can move some files aside %if 0%{?with_debug_build} InstallPython debug \ %{py_INSTSONAME_debug} \ -O0 %endif # with_debug_build # Now the optimized build: InstallPython optimized \ %{py_INSTSONAME_optimized} install -d -m 0755 ${RPM_BUILD_ROOT}%{pylibdir}/site-packages/__pycache__ mv ${RPM_BUILD_ROOT}%{_bindir}/2to3 ${RPM_BUILD_ROOT}%{_bindir}/python3-2to3 # Development tools install -m755 -d ${RPM_BUILD_ROOT}%{pylibdir}/Tools install Tools/README ${RPM_BUILD_ROOT}%{pylibdir}/Tools/ cp -ar Tools/freeze ${RPM_BUILD_ROOT}%{pylibdir}/Tools/ cp -ar Tools/i18n ${RPM_BUILD_ROOT}%{pylibdir}/Tools/ cp -ar Tools/pynche ${RPM_BUILD_ROOT}%{pylibdir}/Tools/ cp -ar Tools/scripts ${RPM_BUILD_ROOT}%{pylibdir}/Tools/ # Documentation tools install -m755 -d %{buildroot}%{pylibdir}/Doc cp -ar Doc/tools %{buildroot}%{pylibdir}/Doc/ # Demo scripts cp -ar Tools/demo %{buildroot}%{pylibdir}/Tools/ # Fix for bug #136654 rm -f %{buildroot}%{pylibdir}/email/test/data/audiotest.au %{buildroot}%{pylibdir}/test/audiotest.au %if "%{_lib}" == "lib64" install -d -m 0755 %{buildroot}/%{_prefix}/lib/python%{pybasever}/site-packages/__pycache__ %endif # Make python3-devel multilib-ready (bug #192747, #139911) %global _pyconfig32_h pyconfig-32.h %global _pyconfig64_h pyconfig-64.h %ifarch %{power64} s390x x86_64 ia64 alpha sparc64 aarch64 %global _pyconfig_h %{_pyconfig64_h} %else %global _pyconfig_h %{_pyconfig32_h} %endif # ABIFLAGS, LDVERSION and SOABI are in the upstream Makefile %global ABIFLAGS_optimized m %global ABIFLAGS_debug dm %global LDVERSION_optimized %{pybasever}%{ABIFLAGS_optimized} %global LDVERSION_debug %{pybasever}%{ABIFLAGS_debug} %global SOABI_optimized cpython-%{pyshortver}%{ABIFLAGS_optimized} %global SOABI_debug cpython-%{pyshortver}%{ABIFLAGS_debug} %if 0%{?with_debug_build} %global PyIncludeDirs python%{LDVERSION_optimized} python%{LDVERSION_debug} %else %global PyIncludeDirs python%{LDVERSION_optimized} %endif for PyIncludeDir in %{PyIncludeDirs} ; do mv %{buildroot}%{_includedir}/$PyIncludeDir/pyconfig.h \ %{buildroot}%{_includedir}/$PyIncludeDir/%{_pyconfig_h} cat > %{buildroot}%{_includedir}/$PyIncludeDir/pyconfig.h << EOF #include #if __WORDSIZE == 32 #include "%{_pyconfig32_h}" #elif __WORDSIZE == 64 #include "%{_pyconfig64_h}" #else #error "Unknown word size" #endif EOF done # Fix for bug 201434: make sure distutils looks at the right pyconfig.h file # Similar for sysconfig: sysconfig.get_config_h_filename tries to locate # pyconfig.h so it can be parsed, and needs to do this at runtime in site.py # when python starts up (bug 653058) # # Split this out so it goes directly to the pyconfig-32.h/pyconfig-64.h # variants: sed -i -e "s/'pyconfig.h'/'%{_pyconfig_h}'/" \ %{buildroot}%{pylibdir}/distutils/sysconfig.py \ %{buildroot}%{pylibdir}/sysconfig.py # Switch all shebangs to refer to the specific Python version. LD_LIBRARY_PATH=./build/optimized ./build/optimized/python \ Tools/scripts/pathfix.py \ -i "%{_bindir}/python%{pybasever}" \ %{buildroot} # Remove shebang lines from .py files that aren't executable, and # remove executability from .py files that don't have a shebang line: find %{buildroot} -name \*.py \ \( \( \! -perm /u+x,g+x,o+x -exec sed -e '/^#!/Q 0' -e 'Q 1' {} \; \ -print -exec sed -i '1d' {} \; \) -o \( \ -perm /u+x,g+x,o+x ! -exec grep -m 1 -q '^#!' {} \; \ -exec chmod a-x {} \; \) \) # .xpm and .xbm files should not be executable: find %{buildroot} \ \( -name \*.xbm -o -name \*.xpm -o -name \*.xpm.1 \) \ -exec chmod a-x {} \; # Remove executable flag from files that shouldn't have it: chmod a-x \ %{buildroot}%{pylibdir}/distutils/tests/Setup.sample \ %{buildroot}%{pylibdir}/Tools/README # Get rid of DOS batch files: find %{buildroot} -name \*.bat -exec rm {} \; # Get rid of backup files: find %{buildroot}/ -name "*~" -exec rm -f {} \; find . -name "*~" -exec rm -f {} \; rm -f %{buildroot}%{pylibdir}/LICENSE.txt # Junk, no point in putting in -test sub-pkg rm -f ${RPM_BUILD_ROOT}/%{pylibdir}/idlelib/testcode.py* # Get rid of stray patch file from buildroot: rm -f %{buildroot}%{pylibdir}/test/test_imp.py.apply-our-changes-to-expected-shebang # from patch 4 # Fix end-of-line encodings: find %{buildroot}/ -name \*.py -exec sed -i 's/\r//' {} \; # Fix an encoding: iconv -f iso8859-1 -t utf-8 %{buildroot}/%{pylibdir}/Demo/rpc/README > README.conv && mv -f README.conv %{buildroot}/%{pylibdir}/Demo/rpc/README # Note that # %{pylibdir}/Demo/distutils/test2to3/setup.py # is in iso-8859-1 encoding, and that this is deliberate; this is test data # for the 2to3 tool, and one of the functions of the 2to3 tool is to fixup # character encodings within python source code # Do bytecompilation with the newly installed interpreter. # This is similar to the script in macros.pybytecompile # compile *.pyo find %{buildroot} -type f -a -name "*.py" -print0 | \ LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \ PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \ xargs -0 %{buildroot}%{_bindir}/python%{pybasever} -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%{buildroot}")[2]) for f in sys.argv[1:]]' || : # compile *.pyc find %{buildroot} -type f -a -name "*.py" -print0 | \ LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \ PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \ xargs -0 %{buildroot}%{_bindir}/python%{pybasever} -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%{buildroot}")[2], optimize=0) for f in sys.argv[1:]]' || : # Fixup permissions for shared libraries from non-standard 555 to standard 755: find %{buildroot} \ -perm 555 -exec chmod 755 {} \; # Install macros for rpm: mkdir -p %{buildroot}/%{_rpmconfigdir}/macros.d/ install -m 644 %{SOURCE3} %{buildroot}/%{_rpmconfigdir}/macros.d/ # Ensure that the curses module was linked against libncursesw.so, rather than # libncurses.so (bug 539917) ldd %{buildroot}/%{dynload_dir}/_curses*.so \ | grep curses \ | grep libncurses.so && (echo "_curses.so linked against libncurses.so" ; exit 1) # Ensure that the debug modules are linked against the debug libpython, and # likewise for the optimized modules and libpython: for Module in %{buildroot}/%{dynload_dir}/*.so ; do case $Module in *.%{SOABI_debug}) ldd $Module | grep %{py_INSTSONAME_optimized} && (echo Debug module $Module linked against optimized %{py_INSTSONAME_optimized} ; exit 1) ;; *.%{SOABI_optimized}) ldd $Module | grep %{py_INSTSONAME_debug} && (echo Optimized module $Module linked against debug %{py_INSTSONAME_debug} ; exit 1) ;; esac done # # Systemtap hooks: # %if 0%{?with_systemtap} # Install a tapset for this libpython into tapsetdir, fixing up the path to the # library: mkdir -p %{buildroot}%{tapsetdir} %ifarch %{power64} s390x x86_64 ia64 alpha sparc64 aarch64 %global libpython_stp_optimized libpython%{pybasever}-64.stp %global libpython_stp_debug libpython%{pybasever}-debug-64.stp %else %global libpython_stp_optimized libpython%{pybasever}-32.stp %global libpython_stp_debug libpython%{pybasever}-debug-32.stp %endif sed \ -e "s|LIBRARY_PATH|%{_libdir}/%{py_INSTSONAME_optimized}|" \ %{_sourcedir}/libpython.stp \ > %{buildroot}%{tapsetdir}/%{libpython_stp_optimized} %if 0%{?with_debug_build} # In Python 3, python3 and python3-debug don't point to the same binary, # so we have to replace "python3" with "python3-debug" to get systemtap # working with debug build sed \ -e "s|LIBRARY_PATH|%{_libdir}/%{py_INSTSONAME_debug}|" \ -e 's|"python3"|"python3-debug"|' \ %{_sourcedir}/libpython.stp \ > %{buildroot}%{tapsetdir}/%{libpython_stp_debug} %endif # with_debug_build %endif # with_systemtap # Rename the script that differs on different arches to arch specific name mv %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-{,`uname -m`-}config echo -e '#!/bin/sh\nexec `dirname $0`/python%{LDVERSION_optimized}-`uname -m`-config "$@"' > \ %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-config echo '[ $? -eq 127 ] && echo "Could not find python%{LDVERSION_optimized}-`uname -m`-config. Look around to see available arches." >&2' >> \ %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-config chmod +x %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-config # Remove stuff that would conflict with python3 package mv %{buildroot}%{_bindir}/python{3,%{pyshortver}} rm %{buildroot}%{_bindir}/*3 rm %{buildroot}%{_bindir}/python3-* rm %{buildroot}%{_bindir}/pyvenv rm %{buildroot}%{_libdir}/libpython3.so rm %{buildroot}%{_mandir}/man1/python3.1* rm %{buildroot}%{_libdir}/pkgconfig/python3.pc # ====================================================== # Running the upstream test suite # ====================================================== %check # first of all, check timestamps of bytecode files find %{buildroot} -type f -a -name "*.py" -print0 | \ LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \ PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \ xargs -0 %{buildroot}%{_bindir}/python%{pybasever} %{SOURCE8} topdir=$(pwd) CheckPython() { ConfName=$1 ConfDir=$(pwd)/build/$ConfName echo STARTING: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName # Note that we're running the tests using the version of the code in the # builddir, not in the buildroot. # Run the upstream test suite, setting "WITHIN_PYTHON_RPM_BUILD" so that the # our non-standard decorators take effect on the relevant tests: # @unittest._skipInRpmBuild(reason) # @unittest._expectedFailureInRpmBuild # test_faulthandler.test_register_chain currently fails on ppc64le and # aarch64, see upstream bug http://bugs.python.org/issue21131 WITHIN_PYTHON_RPM_BUILD= \ LD_LIBRARY_PATH=$ConfDir $ConfDir/python -m test.regrtest \ --verbose --findleaks \ -x test_distutils \ %ifarch ppc64le aarch64 -x test_faulthandler \ %endif %ifarch %{power64} s390 s390x armv7hl aarch64 -x test_gdb %endif echo FINISHED: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName } %if 0%{run_selftest_suite} # Check each of the configurations: %if 0%{?with_debug_build} CheckPython debug %endif # with_debug_build CheckPython optimized %endif # run_selftest_suite # ====================================================== # Scriptlets # ====================================================== %post -p /sbin/ldconfig %postun -p /sbin/ldconfig %files %defattr(-, root, root) %doc LICENSE README %{_bindir}/pydoc%{pybasever} %{_bindir}/python%{pybasever} %{_bindir}/python%{pyshortver} %{_bindir}/python%{pybasever}m %{_bindir}/pyvenv-%{pybasever} %{_mandir}/*/* %dir %{pylibdir} %dir %{dynload_dir} %{dynload_dir}/_bisect.%{SOABI_optimized}.so %{dynload_dir}/_bz2.%{SOABI_optimized}.so %{dynload_dir}/_codecs_cn.%{SOABI_optimized}.so %{dynload_dir}/_codecs_hk.%{SOABI_optimized}.so %{dynload_dir}/_codecs_iso2022.%{SOABI_optimized}.so %{dynload_dir}/_codecs_jp.%{SOABI_optimized}.so %{dynload_dir}/_codecs_kr.%{SOABI_optimized}.so %{dynload_dir}/_codecs_tw.%{SOABI_optimized}.so %{dynload_dir}/_crypt.%{SOABI_optimized}.so %{dynload_dir}/_csv.%{SOABI_optimized}.so %{dynload_dir}/_ctypes.%{SOABI_optimized}.so %{dynload_dir}/_curses.%{SOABI_optimized}.so %{dynload_dir}/_curses_panel.%{SOABI_optimized}.so %{dynload_dir}/_dbm.%{SOABI_optimized}.so %{dynload_dir}/_decimal.%{SOABI_optimized}.so %{dynload_dir}/_elementtree.%{SOABI_optimized}.so %if %{with_gdbm} %{dynload_dir}/_gdbm.%{SOABI_optimized}.so %endif %{dynload_dir}/_hashlib.%{SOABI_optimized}.so %{dynload_dir}/_heapq.%{SOABI_optimized}.so %{dynload_dir}/_json.%{SOABI_optimized}.so %{dynload_dir}/_lsprof.%{SOABI_optimized}.so %{dynload_dir}/_lzma.%{SOABI_optimized}.so %{dynload_dir}/_multibytecodec.%{SOABI_optimized}.so %{dynload_dir}/_multiprocessing.%{SOABI_optimized}.so %{dynload_dir}/_opcode.%{SOABI_optimized}.so %{dynload_dir}/_pickle.%{SOABI_optimized}.so %{dynload_dir}/_posixsubprocess.%{SOABI_optimized}.so %{dynload_dir}/_random.%{SOABI_optimized}.so %{dynload_dir}/_socket.%{SOABI_optimized}.so %{dynload_dir}/_sqlite3.%{SOABI_optimized}.so %{dynload_dir}/_ssl.%{SOABI_optimized}.so %{dynload_dir}/_struct.%{SOABI_optimized}.so %{dynload_dir}/array.%{SOABI_optimized}.so %{dynload_dir}/audioop.%{SOABI_optimized}.so %{dynload_dir}/binascii.%{SOABI_optimized}.so %{dynload_dir}/cmath.%{SOABI_optimized}.so %{dynload_dir}/_datetime.%{SOABI_optimized}.so %{dynload_dir}/fcntl.%{SOABI_optimized}.so %{dynload_dir}/grp.%{SOABI_optimized}.so %{dynload_dir}/math.%{SOABI_optimized}.so %{dynload_dir}/mmap.%{SOABI_optimized}.so %{dynload_dir}/nis.%{SOABI_optimized}.so %{dynload_dir}/ossaudiodev.%{SOABI_optimized}.so %{dynload_dir}/parser.%{SOABI_optimized}.so %{dynload_dir}/pyexpat.%{SOABI_optimized}.so %{dynload_dir}/readline.%{SOABI_optimized}.so %{dynload_dir}/resource.%{SOABI_optimized}.so %{dynload_dir}/select.%{SOABI_optimized}.so %{dynload_dir}/spwd.%{SOABI_optimized}.so %{dynload_dir}/syslog.%{SOABI_optimized}.so %{dynload_dir}/termios.%{SOABI_optimized}.so %{dynload_dir}/time.%{SOABI_optimized}.so %{dynload_dir}/unicodedata.%{SOABI_optimized}.so %{dynload_dir}/xxlimited.%{SOABI_optimized}.so %{dynload_dir}/zlib.%{SOABI_optimized}.so %dir %{pylibdir}/site-packages/ %dir %{pylibdir}/site-packages/__pycache__/ %{pylibdir}/site-packages/README %{pylibdir}/*.py %dir %{pylibdir}/__pycache__/ %{pylibdir}/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/asyncio/ %dir %{pylibdir}/asyncio/__pycache__/ %{pylibdir}/asyncio/*.py %{pylibdir}/asyncio/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/collections/ %dir %{pylibdir}/collections/__pycache__/ %{pylibdir}/collections/*.py %{pylibdir}/collections/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/concurrent/ %dir %{pylibdir}/concurrent/__pycache__/ %{pylibdir}/concurrent/*.py %{pylibdir}/concurrent/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/concurrent/futures/ %dir %{pylibdir}/concurrent/futures/__pycache__/ %{pylibdir}/concurrent/futures/*.py %{pylibdir}/concurrent/futures/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/ctypes/ %dir %{pylibdir}/ctypes/__pycache__/ %{pylibdir}/ctypes/*.py %{pylibdir}/ctypes/__pycache__/*%{bytecode_suffixes} %{pylibdir}/ctypes/macholib %{pylibdir}/curses %dir %{pylibdir}/dbm/ %dir %{pylibdir}/dbm/__pycache__/ %{pylibdir}/dbm/*.py %{pylibdir}/dbm/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/distutils/ %dir %{pylibdir}/distutils/__pycache__/ %{pylibdir}/distutils/*.py %{pylibdir}/distutils/__pycache__/*%{bytecode_suffixes} %{pylibdir}/distutils/README %{pylibdir}/distutils/command %dir %{pylibdir}/email/ %dir %{pylibdir}/email/__pycache__/ %{pylibdir}/email/*.py %{pylibdir}/email/__pycache__/*%{bytecode_suffixes} %{pylibdir}/email/mime %doc %{pylibdir}/email/architecture.rst %{pylibdir}/encodings %{pylibdir}/ensurepip %{pylibdir}/html %{pylibdir}/http %{pylibdir}/idlelib %dir %{pylibdir}/importlib/ %dir %{pylibdir}/importlib/__pycache__/ %{pylibdir}/importlib/*.py %{pylibdir}/importlib/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/json/ %dir %{pylibdir}/json/__pycache__/ %{pylibdir}/json/*.py %{pylibdir}/json/__pycache__/*%{bytecode_suffixes} %{pylibdir}/lib2to3 %{pylibdir}/logging %{pylibdir}/multiprocessing %{pylibdir}/plat-linux %{pylibdir}/pydoc_data %dir %{pylibdir}/sqlite3/ %dir %{pylibdir}/sqlite3/__pycache__/ %{pylibdir}/sqlite3/*.py %{pylibdir}/sqlite3/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/test/ %dir %{pylibdir}/test/__pycache__/ %dir %{pylibdir}/test/support/ %dir %{pylibdir}/test/support/__pycache__/ %{pylibdir}/test/__init__.py %{pylibdir}/test/__pycache__/__init__%{bytecode_suffixes} %{pylibdir}/test/support/__init__.py %{pylibdir}/test/support/__pycache__/__init__%{bytecode_suffixes} %dir %{pylibdir}/unittest/ %dir %{pylibdir}/unittest/__pycache__/ %{pylibdir}/unittest/*.py %{pylibdir}/unittest/__pycache__/*%{bytecode_suffixes} %{pylibdir}/urllib %dir %{pylibdir}/venv/ %dir %{pylibdir}/venv/__pycache__/ %{pylibdir}/venv/*.py %{pylibdir}/venv/__pycache__/*%{bytecode_suffixes} %{pylibdir}/venv/scripts %{pylibdir}/wsgiref %{pylibdir}/xml %{pylibdir}/xmlrpc %if "%{_lib}" == "lib64" %attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever} %attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages %attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages/__pycache__/ %endif # "Makefile" and the config-32/64.h file are needed by # distutils/sysconfig.py:_init_posix(), so we include them in the core # package, along with their parent directories (bug 531901): %dir %{pylibdir}/config-%{LDVERSION_optimized}/ %{pylibdir}/config-%{LDVERSION_optimized}/Makefile %dir %{_includedir}/python%{LDVERSION_optimized}/ %{_includedir}/python%{LDVERSION_optimized}/%{_pyconfig_h} %{_libdir}/%{py_INSTSONAME_optimized} %if 0%{?with_systemtap} %dir %(dirname %{tapsetdir}) %dir %{tapsetdir} %{tapsetdir}/%{libpython_stp_optimized} %doc systemtap-example.stp pyfuntop.stp %endif %{pylibdir}/config-%{LDVERSION_optimized}/* %{_includedir}/python%{LDVERSION_optimized}/*.h %doc Misc/README.valgrind Misc/valgrind-python.supp Misc/gdbinit %{_bindir}/python%{pybasever}-config %{_bindir}/python%{LDVERSION_optimized}-config %{_bindir}/python%{LDVERSION_optimized}-*-config %{_libdir}/libpython%{LDVERSION_optimized}.so %{_libdir}/pkgconfig/python-%{LDVERSION_optimized}.pc %{_libdir}/pkgconfig/python-%{pybasever}.pc %{_rpmconfigdir}/macros.d/macros.pybytecompile%{pybasever} %{_bindir}/2to3-%{pybasever} %{_bindir}/idle%{pybasever} %{pylibdir}/Tools %doc %{pylibdir}/Doc %{pylibdir}/tkinter %{dynload_dir}/_tkinter.%{SOABI_optimized}.so %{pylibdir}/turtle.py %{pylibdir}/__pycache__/turtle*%{bytecode_suffixes} %dir %{pylibdir}/turtledemo %{pylibdir}/turtledemo/*.py %{pylibdir}/turtledemo/*.cfg %dir %{pylibdir}/turtledemo/__pycache__/ %{pylibdir}/turtledemo/__pycache__/*%{bytecode_suffixes} %{pylibdir}/ctypes/test %{pylibdir}/distutils/tests %{pylibdir}/sqlite3/test %{pylibdir}/test %{dynload_dir}/_ctypes_test.%{SOABI_optimized}.so %{dynload_dir}/_testbuffer.%{SOABI_optimized}.so %{dynload_dir}/_testcapi.%{SOABI_optimized}.so %{dynload_dir}/_testimportmultiple.%{SOABI_optimized}.so %{pylibdir}/lib2to3/tests %{pylibdir}/tkinter/test %{pylibdir}/unittest/test # We don't bother splitting the debug build out into further subpackages: # if you need it, you're probably a developer. # Hence the manifest is the combination of analogous files in the manifests of # all of the other subpackages %if 0%{?with_debug_build} # Analog of the core subpackage's files: %{_bindir}/python%{LDVERSION_debug} # Analog of the -libs subpackage's files: # ...with debug builds of the built-in "extension" modules: %{dynload_dir}/_bisect.%{SOABI_debug}.so %{dynload_dir}/_bz2.%{SOABI_debug}.so %{dynload_dir}/_codecs_cn.%{SOABI_debug}.so %{dynload_dir}/_codecs_hk.%{SOABI_debug}.so %{dynload_dir}/_codecs_iso2022.%{SOABI_debug}.so %{dynload_dir}/_codecs_jp.%{SOABI_debug}.so %{dynload_dir}/_codecs_kr.%{SOABI_debug}.so %{dynload_dir}/_codecs_tw.%{SOABI_debug}.so %{dynload_dir}/_crypt.%{SOABI_debug}.so %{dynload_dir}/_csv.%{SOABI_debug}.so %{dynload_dir}/_ctypes.%{SOABI_debug}.so %{dynload_dir}/_curses.%{SOABI_debug}.so %{dynload_dir}/_curses_panel.%{SOABI_debug}.so %{dynload_dir}/_dbm.%{SOABI_debug}.so %{dynload_dir}/_decimal.%{SOABI_debug}.so %{dynload_dir}/_elementtree.%{SOABI_debug}.so %if %{with_gdbm} %{dynload_dir}/_gdbm.%{SOABI_debug}.so %endif %{dynload_dir}/_hashlib.%{SOABI_debug}.so %{dynload_dir}/_heapq.%{SOABI_debug}.so %{dynload_dir}/_json.%{SOABI_debug}.so %{dynload_dir}/_lsprof.%{SOABI_debug}.so %{dynload_dir}/_lzma.%{SOABI_debug}.so %{dynload_dir}/_multibytecodec.%{SOABI_debug}.so %{dynload_dir}/_multiprocessing.%{SOABI_debug}.so %{dynload_dir}/_opcode.%{SOABI_debug}.so %{dynload_dir}/_pickle.%{SOABI_debug}.so %{dynload_dir}/_posixsubprocess.%{SOABI_debug}.so %{dynload_dir}/_random.%{SOABI_debug}.so %{dynload_dir}/_socket.%{SOABI_debug}.so %{dynload_dir}/_sqlite3.%{SOABI_debug}.so %{dynload_dir}/_ssl.%{SOABI_debug}.so %{dynload_dir}/_struct.%{SOABI_debug}.so %{dynload_dir}/array.%{SOABI_debug}.so %{dynload_dir}/audioop.%{SOABI_debug}.so %{dynload_dir}/binascii.%{SOABI_debug}.so %{dynload_dir}/cmath.%{SOABI_debug}.so %{dynload_dir}/_datetime.%{SOABI_debug}.so %{dynload_dir}/fcntl.%{SOABI_debug}.so %{dynload_dir}/grp.%{SOABI_debug}.so %{dynload_dir}/math.%{SOABI_debug}.so %{dynload_dir}/mmap.%{SOABI_debug}.so %{dynload_dir}/nis.%{SOABI_debug}.so %{dynload_dir}/ossaudiodev.%{SOABI_debug}.so %{dynload_dir}/parser.%{SOABI_debug}.so %{dynload_dir}/pyexpat.%{SOABI_debug}.so %{dynload_dir}/readline.%{SOABI_debug}.so %{dynload_dir}/resource.%{SOABI_debug}.so %{dynload_dir}/select.%{SOABI_debug}.so %{dynload_dir}/spwd.%{SOABI_debug}.so %{dynload_dir}/syslog.%{SOABI_debug}.so %{dynload_dir}/termios.%{SOABI_debug}.so %{dynload_dir}/time.%{SOABI_debug}.so %{dynload_dir}/unicodedata.%{SOABI_debug}.so %{dynload_dir}/zlib.%{SOABI_debug}.so # No need to split things out the "Makefile" and the config-32/64.h file as we # do for the regular build above (bug 531901), since they're all in one package # now; they're listed below, under "-devel": %{_libdir}/%{py_INSTSONAME_debug} %if 0%{?with_systemtap} %dir %(dirname %{tapsetdir}) %dir %{tapsetdir} %{tapsetdir}/%{libpython_stp_debug} %endif # Analog of the -devel subpackage's files: %{pylibdir}/config-%{LDVERSION_debug} %{_includedir}/python%{LDVERSION_debug} %{_bindir}/python%{LDVERSION_debug}-config %{_libdir}/libpython%{LDVERSION_debug}.so %{_libdir}/pkgconfig/python-%{LDVERSION_debug}.pc # Analog of the -tools subpackage's files: # None for now; we could build precanned versions that have the appropriate # shebang if needed # Analog of the tkinter subpackage's files: %{dynload_dir}/_tkinter.%{SOABI_debug}.so # Analog of the -test subpackage's files: %{dynload_dir}/_ctypes_test.%{SOABI_debug}.so %{dynload_dir}/_testbuffer.%{SOABI_debug}.so %{dynload_dir}/_testcapi.%{SOABI_debug}.so %{dynload_dir}/_testimportmultiple.%{SOABI_debug}.so %endif # with_debug_build # We put the debug-gdb.py file inside /usr/lib/debug to avoid noise from # ldconfig (rhbz:562980). # # The /usr/lib/rpm/redhat/macros defines %__debug_package to use # debugfiles.list, and it appears that everything below /usr/lib/debug and # (/usr/src/debug) gets added to this file (via LISTFILES) in # /usr/lib/rpm/find-debuginfo.sh # # Hence by installing it below /usr/lib/debug we ensure it is added to the # -debuginfo subpackage # (if it doesn't, then the rpmbuild ought to fail since the debug-gdb.py # payload file would be unpackaged) # ====================================================== # Finally, the changelog: # ====================================================== %changelog * Thu Aug 11 2016 Miro Hrončok - 3.4.3-11 - Imported from F23