Blob Blame History Raw
# Provide a way to skip tests via rpmbuild `--without`
# This makes it easier to skip tests in copr repos, where
# the qemu test suite is historically flakey
%bcond_without check

%global libfdt_version 1.6.0
%global libseccomp_version 2.4.0
%global libusbx_version 1.0.23
%global meson_version 0.58.2
%global usbredir_version 0.7.1
%global ipxe_version 20200823-5.git4bd064de

%global have_memlock_limits 0
%global need_qemu_kvm 0
%ifarch %{ix86}
%global kvm_package   system-x86
# need_qemu_kvm should only ever be used by x86
%global need_qemu_kvm 1
%endif
%ifarch x86_64
%global kvm_package   system-x86
# need_qemu_kvm should only ever be used by x86
%global need_qemu_kvm 1
%endif
%ifarch %{power64}
%global have_memlock_limits 1
%global kvm_package   system-ppc
%endif
%ifarch s390x
%global kvm_package   system-s390x
%endif
%ifarch armv7hl
%global kvm_package   system-arm
%endif
%ifarch aarch64
%global kvm_package   system-aarch64
%endif
%ifarch %{mips}
%global kvm_package   system-mips
%endif
%ifarch riscv64
%global kvm_package   system-riscv
%endif

%global modprobe_kvm_conf %{_sourcedir}/kvm.conf
%ifarch s390x
    %global modprobe_kvm_conf %{_sourcedir}/kvm-s390x.conf
%endif
%ifarch %{ix86} x86_64
    %global modprobe_kvm_conf %{_sourcedir}/kvm-x86.conf
%endif

%global tools_only 0

%global user_static 1
%if 0%{?rhel}
# EPEL/RHEL do not have required -static builddeps
%global user_static 0
%endif

%global have_kvm 0
%if 0%{?kvm_package:1}
%global have_kvm 1
%endif

# Matches numactl ExcludeArch
%global have_numactl 1
%ifarch %{arm}
%global have_numactl 0
%endif

# Matches spice ExclusiveArch
%global have_spice 1
%ifnarch %{ix86} x86_64 %{arm} aarch64
%global have_spice 0
%endif
%if 0%{?rhel} >= 9
%global have_spice 0
%endif

# Matches xen ExclusiveArch
%global have_xen 0
%if 0%{?fedora}
%ifarch x86_64 aarch64
%global have_xen 1
%endif
%endif

%global have_liburing 0
%if 0%{?fedora}
%ifnarch %{arm}
%global have_liburing 1
%endif
%endif

%global have_virgl 0
%if 0%{?fedora}
%global have_virgl 1
%endif

%global have_pmem 0
%ifarch x86_64 %{power64}
%global have_pmem 1
%endif

%global have_jack 1
%if 0%{?rhel}
%global have_jack 0
%endif

%global have_dbus_display 1
%if %{defined rhel} && 0%{?rhel} < 9
# RHEL/Centos 8 glib is not new enough
%global have_dbus_display 0
%endif

%global have_sdl_image %{defined fedora}
%global have_fdt 1
%global have_opengl 1
%global have_usbredir 1
%global enable_werror 0


# Matches edk2.spec ExclusiveArch
%global have_edk2 0
%ifarch %{ix86} x86_64 %{arm} aarch64
%global have_edk2 1
%endif

# All modules should be listed here.
%define have_block_rbd 1
%ifarch %{ix86} %{arm}
%define have_block_rbd 0
%endif


%global have_block_gluster 1
%if 0%{?rhel} >= 9
%global have_block_gluster 0
%endif

%define have_block_nfs 0
%if 0%{?fedora}
%define have_block_nfs 1
%endif

%define have_capstone_devel 0
%if 0%{?fedora}
# capstone-devel is only on Fedora. Use it if it's available, but
# if not, use the internal qemu submodule copy
%define have_capstone_devel 1
%endif

%define have_librdma 1
%ifarch %{arm}
%define have_librdma 0
%endif

%define have_libcacard 1
%if 0%{?rhel} >= 9
%define have_libcacard 0
%endif

# LTO still has issues with qemu on armv7hl and aarch64
# https://bugzilla.redhat.com/show_bug.cgi?id=1952483
%global _lto_cflags %{nil}

%global firmwaredirs "%{_datadir}/qemu-firmware:%{_datadir}/ipxe/qemu:%{_datadir}/seavgabios:%{_datadir}/seabios:%{_datadir}/sgabios"

%global qemudocdir %{_docdir}/%{name}
%define evr %{epoch}:%{version}-%{release}

%define requires_block_curl Requires: %{name}-block-curl = %{evr}
%define requires_block_dmg Requires: %{name}-block-dmg = %{evr}
%if %{have_block_gluster}
%define requires_block_gluster Requires: %{name}-block-gluster = %{evr}
%define obsoletes_block_gluster %{nil}
%else
%define requires_block_gluster %{nil}
%define obsoletes_block_gluster Obsoletes: %{name}-block-gluster < %{evr}
%endif
%define requires_block_iscsi Requires: %{name}-block-iscsi = %{evr}
%if %{have_block_nfs}
%define requires_block_nfs Requires: %{name}-block-nfs = %{evr}
%define obsoletes_block_nfs %{nil}
%else
%define requires_block_nfs %{nil}
%define obsoletes_block_nfs Obsoletes: %{name}-block-nfs < %{evr}
%endif
%if %{have_block_rbd}
%define requires_block_rbd Requires: %{name}-block-rbd = %{evr}
%define obsoletes_block_rbd %{nil}
%else
%define requires_block_rbd %{nil}
%define obsoletes_block_rbd Obsoletes: %{name}-block-rbd < %{evr}
%endif
%define requires_block_ssh Requires: %{name}-block-ssh = %{evr}
%define requires_audio_alsa Requires: %{name}-audio-alsa = %{evr}
%define requires_audio_oss Requires: %{name}-audio-oss = %{evr}
%define requires_audio_pa Requires: %{name}-audio-pa = %{evr}
%define requires_audio_sdl Requires: %{name}-audio-sdl = %{evr}
%define requires_char_baum Requires: %{name}-char-baum = %{evr}
%define requires_device_usb_host Requires: %{name}-device-usb-host = %{evr}
%define requires_device_usb_redirect Requires: %{name}-device-usb-redirect = %{evr}
%define requires_ui_curses Requires: %{name}-ui-curses = %{evr}
%define requires_ui_gtk Requires: %{name}-ui-gtk = %{evr}
%define requires_ui_sdl Requires: %{name}-ui-sdl = %{evr}
%define requires_ui_egl_headless Requires: %{name}-ui-egl-headless = %{evr}
%define requires_ui_opengl Requires: %{name}-ui-opengl = %{evr}
%define requires_device_display_virtio_gpu Requires: %{name}-device-display-virtio-gpu = %{evr}
%define requires_device_display_virtio_gpu_gl Requires: %{name}-device-display-virtio-gpu-gl = %{evr}
%define requires_device_display_virtio_gpu_pci Requires: %{name}-device-display-virtio-gpu-pci = %{evr}
%define requires_device_display_virtio_gpu_pci_gl Requires: %{name}-device-display-virtio-gpu-pci-gl = %{evr}
%define requires_device_display_virtio_gpu_ccw Requires: %{name}-device-display-virtio-gpu-ccw = %{evr}
%define requires_device_display_virtio_vga Requires: %{name}-device-display-virtio-vga = %{evr}
%define requires_device_display_virtio_vga_gl Requires: %{name}-device-display-virtio-vga-gl = %{evr}
%define requires_package_qemu_pr_helper Requires: qemu-pr-helper
%define requires_package_virtiofsd Requires: vhostuser-backend(fs)

%if %{have_virgl}
%define requires_device_display_vhost_user_gpu Requires: %{name}-device-display-vhost-user-gpu = %{evr}
%else
%define requires_device_display_vhost_user_gpu %{nil}
%endif

%if %{have_jack}
%define jack_drv jack,
%define requires_audio_jack Requires: %{name}-audio-jack = %{evr}
%else
%define requires_audio_jack %{nil}
%endif

%if %{have_dbus_display}
%define requires_audio_dbus Requires: %{name}-audio-dbus = %{evr}
%define requires_ui_dbus Requires: %{name}-ui-dbus = %{evr}
%else
%define requires_audio_dbus %{nil}
%define requires_ui_dbus %{nil}
%endif

%if %{have_spice}
%define requires_ui_spice_app Requires: %{name}-ui-spice-app = %{evr}
%define requires_ui_spice_core Requires: %{name}-ui-spice-core = %{evr}
%define requires_device_display_qxl Requires: %{name}-device-display-qxl = %{evr}
%define requires_audio_spice Requires: %{name}-audio-spice = %{evr}
%define requires_char_spice Requires: %{name}-char-spice = %{evr}
%else
%define requires_ui_spice_app %{nil}
%define requires_ui_spice_core %{nil}
%define requires_device_display_qxl %{nil}
%define requires_audio_spice %{nil}
%define requires_char_spice %{nil}
%endif

%if %{have_libcacard}
%define requires_device_usb_smartcard Requires: %{name}-device-usb-smartcard = %{evr}
%else
%define requires_device_usb_smartcard %{nil}
%endif

%global requires_all_modules \
%{requires_block_curl} \
%{requires_block_dmg} \
%{requires_block_gluster} \
%{requires_block_iscsi} \
%{requires_block_nfs} \
%{requires_block_rbd} \
%{requires_block_ssh} \
%{requires_audio_alsa} \
%{requires_audio_dbus} \
%{requires_audio_oss} \
%{requires_audio_pa} \
%{requires_audio_sdl} \
%{requires_audio_jack} \
%{requires_audio_spice} \
%{requires_ui_curses} \
%{requires_ui_gtk} \
%{requires_ui_sdl} \
%{requires_ui_egl_headless} \
%{requires_ui_opengl} \
%{requires_ui_spice_app} \
%{requires_ui_spice_core} \
%{requires_char_baum} \
%{requires_char_spice} \
%{requires_device_display_qxl} \
%{requires_device_display_vhost_user_gpu} \
%{requires_device_display_virtio_gpu} \
%{requires_device_display_virtio_gpu_ccw} \
%{requires_device_display_virtio_gpu_gl} \
%{requires_device_display_virtio_gpu_pci} \
%{requires_device_display_virtio_gpu_pci_gl} \
%{requires_device_display_virtio_vga} \
%{requires_device_display_virtio_vga_gl} \
%{requires_device_usb_host} \
%{requires_device_usb_redirect} \
%{requires_device_usb_smartcard} \
%{requires_package_qemu_pr_helper} \
%{requires_package_virtiofsd} \

# Modules which can be conditionally built
%global obsoletes_some_modules \
%{obsoletes_block_gluster} \
%{obsoletes_block_rbd} \
%{obsoletes_block_rbd} \
Obsoletes: %{name}-system-lm32 <= %{epoch}:%{version}-%{release} \
Obsoletes: %{name}-system-lm32-core <= %{epoch}:%{version}-%{release} \
Obsoletes: %{name}-system-moxie <= %{epoch}:%{version}-%{release} \
Obsoletes: %{name}-system-moxie-core <= %{epoch}:%{version}-%{release} \
Obsoletes: %{name}-system-unicore32 <= %{epoch}:%{version}-%{release} \
Obsoletes: %{name}-system-unicore32-core <= %{epoch}:%{version}-%{release}

# Release candidate version tracking
# global rcver rc4
%if 0%{?rcver:1}
%global rcrel .%{rcver}
%global rcstr -%{rcver}
%endif

# To prevent rpmdev-bumpspec breakage
%global baserelease 6

Summary: QEMU is a FAST! processor emulator
Name: qemu
Version: 7.0.0
Release: %{baserelease}%{?rcrel}%{?dist}
Epoch: 2
License: GPLv2 and BSD and MIT and CC-BY
URL: http://www.qemu.org/

Source0: http://wiki.qemu-project.org/download/%{name}-%{version}%{?rcstr}.tar.xz

Source10: qemu-guest-agent.service
Source11: 99-qemu-guest-agent.rules
Source12: bridge.conf
Source17: qemu-ga.sysconfig
Source21: 95-kvm-memlock.conf
Source26: vhost.conf
Source27: kvm.conf
Source30: kvm-s390x.conf
Source31: kvm-x86.conf
Source36: README.tests

# Fix SGX assert
Patch0001: 0001-target-i386-the-sgx_epc_get_section-stub-is-reachabl.patch
# Fix virtio-scsi hang (bz #2079347)
Patch0002: 0002-virtio-scsi-fix-ctrl-and-event-handler-functions-in-.patch
Patch0003: 0003-virtio-scsi-don-t-waste-CPU-polling-the-event-virtqu.patch
Patch0004: 0004-virtio-scsi-clean-up-virtio_scsi_handle_event_vq.patch
Patch0005: 0005-virtio-scsi-clean-up-virtio_scsi_handle_ctrl_vq.patch
Patch0006: 0006-virtio-scsi-clean-up-virtio_scsi_handle_cmd_vq.patch
Patch0007: 0007-virtio-scsi-move-request-related-items-from-.h-to-.c.patch
Patch0008: 0008-Disable-flakey-dbus-display-test.patch
Patch0009: 0009-Fix-iotests-with-modules-and-qemu-system-s390x.patch
Patch0010: 0010-Skip-iotests-entirely.patch

BuildRequires: meson >= %{meson_version}
BuildRequires: zlib-devel
BuildRequires: glib2-devel
BuildRequires: gnutls-devel
BuildRequires: libselinux-devel
BuildRequires: cyrus-sasl-devel
BuildRequires: libaio-devel
BuildRequires: python3-devel
BuildRequires: libiscsi-devel
BuildRequires: libattr-devel
BuildRequires: libusbx-devel >= %{libusbx_version}
%if %{have_usbredir}
BuildRequires: usbredir-devel >= %{usbredir_version}
%endif
BuildRequires: texinfo
BuildRequires: python3-sphinx
BuildRequires: python3-sphinx_rtd_theme
BuildRequires: libseccomp-devel >= %{libseccomp_version}
# For network block driver
BuildRequires: libcurl-devel
BuildRequires: libssh-devel
%if %{have_block_rbd}
BuildRequires: librbd-devel
%endif
# We need both because the 'stap' binary is probed for by configure
BuildRequires: systemtap
BuildRequires: systemtap-sdt-devel
# For VNC PNG support
BuildRequires: libpng-devel
# For virtiofs
BuildRequires: libcap-ng-devel
# Hard requirement for version >= 1.3
BuildRequires: pixman-devel
# For rdma
%if %{have_librdma}
BuildRequires: rdma-core-devel
%endif
%if %{have_fdt}
BuildRequires: libfdt-devel >= %{libfdt_version}
%endif
# For compressed guest memory dumps
BuildRequires: lzo-devel snappy-devel
# For NUMA memory binding
%if %{have_numactl}
BuildRequires: numactl-devel
%endif
# qemu-pr-helper multipath support (requires libudev too)
BuildRequires: device-mapper-multipath-devel
BuildRequires: systemd-devel
%if %{have_pmem}
BuildRequires: libpmem-devel
%endif
# qemu-keymap
BuildRequires: pkgconfig(xkbcommon)
%if %{have_opengl}
BuildRequires: pkgconfig(epoxy)
BuildRequires: pkgconfig(libdrm)
BuildRequires: pkgconfig(gbm)
%endif
BuildRequires: perl-Test-Harness
BuildRequires: libslirp-devel
BuildRequires: libbpf-devel


# Fedora specific
%if "%{toolchain}" == "clang"
BuildRequires: clang
%else
BuildRequires: gcc
%endif
BuildRequires: make
# For autosetup git_am
BuildRequires: git
# -display sdl support
BuildRequires: SDL2-devel
# pulseaudio audio output
BuildRequires: pulseaudio-libs-devel
# alsa audio output
BuildRequires: alsa-lib-devel
%if %{have_block_nfs}
# NFS drive support
BuildRequires: libnfs-devel
%endif
# curses display backend
BuildRequires: ncurses-devel
%if %{have_spice}
# spice graphics support
BuildRequires: spice-protocol
BuildRequires: spice-server-devel
%endif
# VNC JPEG support
BuildRequires: libjpeg-devel
# Braille device support
BuildRequires: brlapi-devel
%if %{have_block_gluster}
# gluster block driver
BuildRequires: glusterfs-api-devel
%endif
# GTK frontend
BuildRequires: gtk3-devel
BuildRequires: vte291-devel
# GTK translations
BuildRequires: gettext
%if %{have_xen}
# Xen support
BuildRequires: xen-devel
%endif
# reading bzip2 compressed dmg images
BuildRequires: bzip2-devel
# TLS test suite
BuildRequires: libtasn1-devel
%if %{have_libcacard}
# smartcard device
BuildRequires: libcacard-devel
%endif
%if %{have_virgl}
# virgl 3d support
BuildRequires: virglrenderer-devel
%endif
%if %{have_capstone_devel}
# preferred disassembler for TCG
BuildRequires: capstone-devel
%endif
# qemu-ga
BuildRequires: libudev-devel
# qauth infrastructure
BuildRequires: pam-devel
%if %{have_liburing}
# liburing support. Library isn't built for arm
BuildRequires: liburing-devel
%endif
# zstd compression support
BuildRequires: libzstd-devel
# `hostname` used by test suite
BuildRequires: hostname
# nvdimm dax
BuildRequires: daxctl-devel
# fuse block device
BuildRequires: fuse-devel
%if %{have_jack}
# jack audio driver
BuildRequires: (pipewire-jack-audio-connection-kit-devel or jack-audio-connection-kit-devel)
%endif
BuildRequires: fuse3-devel
%if %{have_sdl_image}
BuildRequires: SDL2_image-devel
%endif

%if %{user_static}
BuildRequires: glibc-static pcre-static glib2-static zlib-static
%endif

# Requires for the Fedora 'qemu' metapackage
Requires: %{name}-user = %{epoch}:%{version}-%{release}
Requires: %{name}-system-aarch64 = %{epoch}:%{version}-%{release}
Requires: %{name}-system-alpha = %{epoch}:%{version}-%{release}
Requires: %{name}-system-arm = %{epoch}:%{version}-%{release}
Requires: %{name}-system-avr = %{epoch}:%{version}-%{release}
Requires: %{name}-system-cris = %{epoch}:%{version}-%{release}
Requires: %{name}-system-m68k = %{epoch}:%{version}-%{release}
Requires: %{name}-system-microblaze = %{epoch}:%{version}-%{release}
Requires: %{name}-system-mips = %{epoch}:%{version}-%{release}
Requires: %{name}-system-nios2 = %{epoch}:%{version}-%{release}
Requires: %{name}-system-or1k = %{epoch}:%{version}-%{release}
Requires: %{name}-system-ppc = %{epoch}:%{version}-%{release}
Requires: %{name}-system-riscv = %{epoch}:%{version}-%{release}
Requires: %{name}-system-rx = %{epoch}:%{version}-%{release}
Requires: %{name}-system-s390x = %{epoch}:%{version}-%{release}
Requires: %{name}-system-sh4 = %{epoch}:%{version}-%{release}
Requires: %{name}-system-sparc = %{epoch}:%{version}-%{release}
Requires: %{name}-system-tricore = %{epoch}:%{version}-%{release}
Requires: %{name}-system-x86 = %{epoch}:%{version}-%{release}
Requires: %{name}-system-xtensa = %{epoch}:%{version}-%{release}
Requires: %{name}-img = %{epoch}:%{version}-%{release}
Requires: %{name}-tools = %{epoch}:%{version}-%{release}


%description
%{name} is an open source virtualizer that provides hardware
emulation for the KVM hypervisor. %{name} acts as a virtual
machine monitor together with the KVM kernel modules, and emulates the
hardware for a full system such as a PC and its associated peripherals.

%package common
Summary: QEMU common files needed by all QEMU targets
Requires(post): /usr/bin/getent
Requires(post): /usr/sbin/groupadd
Requires(post): /usr/sbin/useradd
Requires(post): systemd-units
Requires(preun): systemd-units
Requires(postun): systemd-units
%{obsoletes_some_modules}
Requires: ipxe-roms-qemu >= %{ipxe_version}
%description common
%{name} is an open source virtualizer that provides hardware emulation for
the KVM hypervisor.

This package provides documentation and auxiliary programs used with %{name}.


%package docs
Summary: %{name} documentation
%description docs
%{name}-docs provides documentation files regarding %{name}.


%package -n qemu-img
Summary: QEMU command line tool for manipulating disk images
%description -n qemu-img
This package provides a command line tool for manipulating disk images.


%package -n qemu-guest-agent
Summary: QEMU guest agent
Requires(post): systemd-units
Requires(preun): systemd-units
Requires(postun): systemd-units
%description -n qemu-guest-agent
%{name} is an open source virtualizer that provides hardware emulation for
the KVM hypervisor.

This package provides an agent to run inside guests, which communicates
with the host over a virtio-serial channel named "org.qemu.guest_agent.0"

This package does not need to be installed on the host OS.


%package tools
Summary: %{name} support tools
%description tools
%{name}-tools provides various tools related to %{name} usage.


%package -n qemu-pr-helper
Summary: qemu-pr-helper utility for %{name}
%description -n qemu-pr-helper
This package provides the qemu-pr-helper utility that is required for certain
SCSI features.


%package -n qemu-virtiofsd
Summary: QEMU virtio-fs shared file system daemon
Provides: vhostuser-backend(fs)
%description -n qemu-virtiofsd
This package provides virtiofsd daemon. This program is a vhost-user backend
that implements the virtio-fs device that is used for sharing a host directory
tree with a guest.


%package tests
Summary: tests for the %{name} package
Requires: %{name} = %{epoch}:%{version}-%{release}

%define testsdir %{_libdir}/%{name}/tests-src

%description tests
The %{name}-tests rpm contains tests that can be used to verify
the functionality of the installed %{name} package

Install this package if you want access to the avocado_qemu
tests, or qemu-iotests.


%package  block-curl
Summary: QEMU CURL block driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description block-curl
This package provides the additional CURL block driver for QEMU.

Install this package if you want to access remote disks over
http, https, ftp and other transports provided by the CURL library.


%package  block-iscsi
Summary: QEMU iSCSI block driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description block-iscsi
This package provides the additional iSCSI block driver for QEMU.

Install this package if you want to access iSCSI volumes.


%if %{have_block_rbd}
%package  block-rbd
Summary: QEMU Ceph/RBD block driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description block-rbd
This package provides the additional Ceph/RBD block driver for QEMU.

Install this package if you want to access remote Ceph volumes
using the rbd protocol.
%endif


%package  block-ssh
Summary: QEMU SSH block driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description block-ssh
This package provides the additional SSH block driver for QEMU.

Install this package if you want to access remote disks using
the Secure Shell (SSH) protocol.


%if %{have_opengl}
%package  ui-opengl
Summary: QEMU opengl support
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
Requires: mesa-libGL
Requires: mesa-libEGL
Requires: mesa-dri-drivers
%description ui-opengl
This package provides opengl support.
%endif


# Fedora specific
%package  block-dmg
Summary: QEMU block driver for DMG disk images
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description block-dmg
This package provides the additional DMG block driver for QEMU.

Install this package if you want to open '.dmg' files.


%if %{have_block_gluster}
%package  block-gluster
Summary: QEMU Gluster block driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description block-gluster
This package provides the additional Gluster block driver for QEMU.

Install this package if you want to access remote Gluster storage.
%endif


%if %{have_block_nfs}
%package  block-nfs
Summary: QEMU NFS block driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}

%description block-nfs
This package provides the additional NFS block driver for QEMU.

Install this package if you want to access remote NFS storage.
%endif


%package  audio-alsa
Summary: QEMU ALSA audio driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description audio-alsa
This package provides the additional ALSA audio driver for QEMU.

%if %{have_dbus_display}
%package  audio-dbus
Summary: QEMU D-Bus audio driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description audio-dbus
This package provides the additional D-Bus audio driver for QEMU.
%endif

%package  audio-oss
Summary: QEMU OSS audio driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description audio-oss
This package provides the additional OSS audio driver for QEMU.

%package  audio-pa
Summary: QEMU PulseAudio audio driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description audio-pa
This package provides the additional PulseAudi audio driver for QEMU.

%package  audio-sdl
Summary: QEMU SDL audio driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description audio-sdl
This package provides the additional SDL audio driver for QEMU.

%if %{have_jack}
%package  audio-jack
Summary: QEMU Jack audio driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description audio-jack
This package provides the additional Jack audio driver for QEMU.
%endif


%package  ui-curses
Summary: QEMU curses UI driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description ui-curses
This package provides the additional curses UI for QEMU.

%if %{have_dbus_display}
%package  ui-dbus
Summary: QEMU D-Bus UI driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description ui-dbus
This package provides the additional D-Bus UI for QEMU.
%endif

%package  ui-gtk
Summary: QEMU GTK UI driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release}
%description ui-gtk
This package provides the additional GTK UI for QEMU.

%package  ui-sdl
Summary: QEMU SDL UI driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release}
%description ui-sdl
This package provides the additional SDL UI for QEMU.

%package  ui-egl-headless
Summary: QEMU EGL headless driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release}
%description ui-egl-headless
This package provides the additional egl-headless UI for QEMU.


%package  char-baum
Summary: QEMU Baum chardev driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description char-baum
This package provides the Baum chardev driver for QEMU.


%package device-display-virtio-gpu
Summary: QEMU virtio-gpu display device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description device-display-virtio-gpu
This package provides the virtio-gpu display device for QEMU.

%package device-display-virtio-gpu-gl
Summary: QEMU virtio-gpu-gl display device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description device-display-virtio-gpu-gl
This package provides the virtio-gpu-gl display device for QEMU.

%package device-display-virtio-gpu-pci
Summary: QEMU virtio-gpu-pci display device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description device-display-virtio-gpu-pci
This package provides the virtio-gpu-pci display device for QEMU.

%package device-display-virtio-gpu-pci-gl
Summary: QEMU virtio-gpu-pci-gl display device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description device-display-virtio-gpu-pci-gl
This package provides the virtio-gpu-pci-gl display device for QEMU.

%package device-display-virtio-gpu-ccw
Summary: QEMU virtio-gpu-ccw display device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description device-display-virtio-gpu-ccw
This package provides the virtio-gpu-ccw display device for QEMU.

%package device-display-virtio-vga
Summary: QEMU virtio-vga display device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description device-display-virtio-vga
This package provides the virtio-vga display device for QEMU.

%package device-display-virtio-vga-gl
Summary: QEMU virtio-vga-gl display device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description device-display-virtio-vga-gl
This package provides the virtio-vga-gl display device for QEMU.

%package device-usb-host
Summary: QEMU usb host device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description device-usb-host
This package provides the USB pass through driver for QEMU.

%package device-usb-redirect
Summary: QEMU usbredir device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description device-usb-redirect
This package provides the usbredir device for QEMU.

%if %{have_libcacard}
%package device-usb-smartcard
Summary: QEMU USB smartcard device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description device-usb-smartcard
This package provides the USB smartcard device for QEMU.
%endif

%if %{have_virgl}
%package device-display-vhost-user-gpu
Summary: QEMU QXL display device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
%description device-display-vhost-user-gpu
This package provides the vhost-user-gpu display device for QEMU.
%endif

%if %{have_spice}
%package  ui-spice-core
Summary: QEMU spice-core UI driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release}
%description ui-spice-core
This package provides the additional spice-core UI for QEMU.

%package  ui-spice-app
Summary: QEMU spice-app UI driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release}
Requires: %{name}-char-spice%{?_isa} = %{epoch}:%{version}-%{release}
%description ui-spice-app
This package provides the additional spice-app UI for QEMU.

%package device-display-qxl
Summary: QEMU QXL display device
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release}
%description device-display-qxl
This package provides the QXL display device for QEMU.

%package  char-spice
Summary: QEMU spice chardev driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release}
%description char-spice
This package provides the spice chardev driver for QEMU.

%package  audio-spice
Summary: QEMU spice audio driver
Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release}
%description audio-spice
This package provides the spice audio driver for QEMU.
%endif


%if %{have_kvm}
%package kvm
Summary: QEMU metapackage for KVM support
Requires: qemu-%{kvm_package} = %{epoch}:%{version}-%{release}
%description kvm
This is a meta-package that provides a qemu-system-<arch> package for native
architectures where kvm can be enabled. For example, in an x86 system, this
will install qemu-system-x86


%package kvm-core
Summary: QEMU metapackage for KVM support
Requires: qemu-%{kvm_package}-core = %{epoch}:%{version}-%{release}
%description kvm-core
This is a meta-package that provides a qemu-system-<arch>-core package
for native architectures where kvm can be enabled. For example, in an
x86 system, this will install qemu-system-x86-core
%endif


%package user
Summary: QEMU user mode emulation of qemu targets
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description user
This package provides the user mode emulation of qemu targets


%package user-binfmt
Summary: QEMU user mode emulation of qemu targets
Requires: %{name}-user = %{epoch}:%{version}-%{release}
Requires(post): systemd-units
Requires(postun): systemd-units
# qemu-user-binfmt + qemu-user-static both provide binfmt rules
# Temporarily disable to get fedora CI working. Re-enable
# once this CI issue let's us deal with subpackage conflicts:
# https://pagure.io/fedora-ci/general/issue/184
#Conflicts: qemu-user-static
%description user-binfmt
This package provides the user mode emulation of qemu targets

%if %{user_static}
%package user-static
Summary: QEMU user mode emulation of qemu targets static build
Requires(post): systemd-units
Requires(postun): systemd-units
# qemu-user-binfmt + qemu-user-static both provide binfmt rules
# Temporarily disable to get fedora CI working. Re-enable
# once this CI issue let's us deal with subpackage conflicts:
# https://pagure.io/fedora-ci/general/issue/184
#Conflicts: qemu-user-binfmt
#Provides: qemu-user-binfmt
Requires: qemu-user-static-aarch64
Requires: qemu-user-static-alpha
Requires: qemu-user-static-arm
Requires: qemu-user-static-cris
Requires: qemu-user-static-hexagon
Requires: qemu-user-static-hppa
Requires: qemu-user-static-m68k
Requires: qemu-user-static-microblaze
Requires: qemu-user-static-mips
Requires: qemu-user-static-nios2
Requires: qemu-user-static-or1k
Requires: qemu-user-static-ppc
Requires: qemu-user-static-riscv
Requires: qemu-user-static-s390x
Requires: qemu-user-static-sh4
Requires: qemu-user-static-sparc
Requires: qemu-user-static-x86
Requires: qemu-user-static-xtensa

%description user-static
This package provides the user mode emulation of qemu targets built as
static binaries

%package user-static-aarch64
Summary: QEMU user mode emulation of aarch64 qemu targets static build
%description user-static-aarch64
This package provides the aarch64 user mode emulation of qemu targets built as
static binaries

%package user-static-alpha
Summary: QEMU user mode emulation of alpha qemu targets static build
%description user-static-alpha
This package provides the alpha user mode emulation of qemu targets built as
static binaries

%package user-static-arm
Summary: QEMU user mode emulation of arm qemu targets static build
%description user-static-arm
This package provides the arm user mode emulation of qemu targets built as
static binaries

%package user-static-cris
Summary: QEMU user mode emulation of cris qemu targets static build
%description user-static-cris
This package provides the cris user mode emulation of qemu targets built as
static binaries

%package user-static-hexagon
Summary: QEMU user mode emulation of hexagon qemu targets static build
%description user-static-hexagon
This package provides the hexagon user mode emulation of qemu targets built as
static binaries

%package user-static-hppa
Summary: QEMU user mode emulation of hppa qemu targets static build
%description user-static-hppa
This package provides the hppa user mode emulation of qemu targets built as
static binaries

%package user-static-m68k
Summary: QEMU user mode emulation of m68k qemu targets static build
%description user-static-m68k
This package provides the m68k user mode emulation of qemu targets built as
static binaries

%package user-static-microblaze
Summary: QEMU user mode emulation of microblaze qemu targets static build
%description user-static-microblaze
This package provides the microblaze user mode emulation of qemu targets built as
static binaries

%package user-static-mips
Summary: QEMU user mode emulation of mips qemu targets static build
%description user-static-mips
This package provides the mips user mode emulation of qemu targets built as
static binaries

%package user-static-nios2
Summary: QEMU user mode emulation of nios2 qemu targets static build
%description user-static-nios2
This package provides the nios2 user mode emulation of qemu targets built as
static binaries

%package user-static-or1k
Summary: QEMU user mode emulation of or1k qemu targets static build
%description user-static-or1k
This package provides the or1k user mode emulation of qemu targets built as
static binaries

%package user-static-ppc
Summary: QEMU user mode emulation of ppc qemu targets static build
%description user-static-ppc
This package provides the ppc user mode emulation of qemu targets built as
static binaries

%package user-static-riscv
Summary: QEMU user mode emulation of riscv qemu targets static build
%description user-static-riscv
This package provides the riscv user mode emulation of qemu targets built as
static binaries

%package user-static-s390x
Summary: QEMU user mode emulation of s390x qemu targets static build
%description user-static-s390x
This package provides the s390x user mode emulation of qemu targets built as
static binaries

%package user-static-sh4
Summary: QEMU user mode emulation of sh4 qemu targets static build
%description user-static-sh4
This package provides the sh4 user mode emulation of qemu targets built as
static binaries
%endif

%package user-static-sparc
Summary: QEMU user mode emulation of sparc qemu targets static build
%description user-static-sparc
This package provides the sparc user mode emulation of qemu targets built as
static binaries

%package user-static-x86
Summary: QEMU user mode emulation of x86 qemu targets static build
%description user-static-x86
This package provides the x86 user mode emulation of qemu targets built as
static binaries

%package user-static-xtensa
Summary: QEMU user mode emulation of xtensa qemu targets static build
%description user-static-xtensa
This package provides the xtensa user mode emulation of qemu targets built as
static binaries


%package system-aarch64
Summary: QEMU system emulator for AArch64
Requires: %{name}-system-aarch64-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-aarch64
This package provides the QEMU system emulator for AArch64.

%package system-aarch64-core
Summary: QEMU system emulator for AArch64
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%if %{have_edk2}
Requires: edk2-aarch64
%endif
%description system-aarch64-core
This package provides the QEMU system emulator for AArch64.


%package system-alpha
Summary: QEMU system emulator for Alpha
Requires: %{name}-system-alpha-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-alpha
This package provides the QEMU system emulator for Alpha systems.

%package system-alpha-core
Summary: QEMU system emulator for Alpha
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-alpha-core
This package provides the QEMU system emulator for Alpha systems.


%package system-arm
Summary: QEMU system emulator for ARM
Requires: %{name}-system-arm-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-arm
This package provides the QEMU system emulator for ARM systems.

%package system-arm-core
Summary: QEMU system emulator for ARM
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%if %{have_edk2}
Requires: edk2-arm
%endif
%description system-arm-core
This package provides the QEMU system emulator for ARM boards.


%package system-avr
Summary: QEMU system emulator for AVR
Requires: %{name}-system-avr-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-avr
This package provides the QEMU system emulator for AVR systems.

%package system-avr-core
Summary: QEMU system emulator for AVR
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-avr-core
This package provides the QEMU system emulator for AVR systems.


%package system-cris
Summary: QEMU system emulator for CRIS
Requires: %{name}-system-cris-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-cris
This package provides the system emulator for CRIS systems.

%package system-cris-core
Summary: QEMU system emulator for CRIS
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-cris-core
This package provides the system emulator for CRIS boards.


%package system-hppa
Summary: QEMU system emulator for HPPA
Requires: %{name}-system-hppa-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-hppa
This package provides the QEMU system emulator for HPPA.

%package system-hppa-core
Summary: QEMU system emulator for hppa
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-hppa-core
This package provides the QEMU system emulator for HPPA.


%package system-m68k
Summary: QEMU system emulator for ColdFire (m68k)
Requires: %{name}-system-m68k-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-m68k
This package provides the QEMU system emulator for ColdFire boards.

%package system-m68k-core
Summary: QEMU system emulator for ColdFire (m68k)
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-m68k-core
This package provides the QEMU system emulator for ColdFire boards.


%package system-microblaze
Summary: QEMU system emulator for Microblaze
Requires: %{name}-system-microblaze-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-microblaze
This package provides the QEMU system emulator for Microblaze boards.

%package system-microblaze-core
Summary: QEMU system emulator for Microblaze
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-microblaze-core
This package provides the QEMU system emulator for Microblaze boards.


%package system-mips
Summary: QEMU system emulator for MIPS
Requires: %{name}-system-mips-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-mips
This package provides the QEMU system emulator for MIPS systems.

%package system-mips-core
Summary: QEMU system emulator for MIPS
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-mips-core
This package provides the QEMU system emulator for MIPS systems.


%package system-nios2
Summary: QEMU system emulator for nios2
Requires: %{name}-system-nios2-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-nios2
This package provides the QEMU system emulator for NIOS2.

%package system-nios2-core
Summary: QEMU system emulator for nios2
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-nios2-core
This package provides the QEMU system emulator for NIOS2.


%package system-or1k
Summary: QEMU system emulator for OpenRisc32
Requires: %{name}-system-or1k-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-or1k
This package provides the QEMU system emulator for OpenRisc32 boards.

%package system-or1k-core
Summary: QEMU system emulator for OpenRisc32
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-or1k-core
This package provides the QEMU system emulator for OpenRisc32 boards.


%package system-ppc
Summary: QEMU system emulator for PPC
Requires: %{name}-system-ppc-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-ppc
This package provides the QEMU system emulator for PPC and PPC64 systems.

%package system-ppc-core
Summary: QEMU system emulator for PPC
Requires: %{name}-common = %{epoch}:%{version}-%{release}
Requires: openbios
Requires: SLOF
Requires: seavgabios-bin
%description system-ppc-core
This package provides the QEMU system emulator for PPC and PPC64 systems.


%package system-riscv
Summary: QEMU system emulator for RISC-V
Requires: %{name}-system-riscv-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-riscv
This package provides the QEMU system emulator for RISC-V systems.

%package system-riscv-core
Summary: QEMU system emulator for RISC-V
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-riscv-core
This package provides the QEMU system emulator for RISC-V systems.


%package system-rx
Summary: QEMU system emulator for RX
Requires: %{name}-system-rx-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-rx
This package provides the QEMU system emulator for RX systems.

%package system-rx-core
Summary: QEMU system emulator for RX
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-rx-core
This package provides the QEMU system emulator for RX systems.


%package system-s390x
Summary: QEMU system emulator for S390
Requires: %{name}-system-s390x-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-s390x
This package provides the QEMU system emulator for S390 systems.

%package system-s390x-core
Summary: QEMU system emulator for S390
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-s390x-core
This package provides the QEMU system emulator for S390 systems.


%package system-sh4
Summary: QEMU system emulator for SH4
Requires: %{name}-system-sh4-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-sh4
This package provides the QEMU system emulator for SH4 boards.

%package system-sh4-core
Summary: QEMU system emulator for SH4
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-sh4-core
This package provides the QEMU system emulator for SH4 boards.


%package system-sparc
Summary: QEMU system emulator for SPARC
Requires: %{name}-system-sparc-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-sparc
This package provides the QEMU system emulator for SPARC and SPARC64 systems.

%package system-sparc-core
Summary: QEMU system emulator for SPARC
Requires: %{name}-common = %{epoch}:%{version}-%{release}
Requires: openbios
%description system-sparc-core
This package provides the QEMU system emulator for SPARC and SPARC64 systems.


%package system-tricore
Summary: QEMU system emulator for tricore
Requires: %{name}-system-tricore-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-tricore
This package provides the QEMU system emulator for Tricore.

%package system-tricore-core
Summary: QEMU system emulator for tricore
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-tricore-core
This package provides the QEMU system emulator for Tricore.


%package system-x86
Summary: QEMU system emulator for x86
Requires: %{name}-system-x86-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-x86
This package provides the QEMU system emulator for x86. When being run in a x86
machine that supports it, this package also provides the KVM virtualization
platform.

%package system-x86-core
Summary: QEMU system emulator for x86
Requires: %{name}-common = %{epoch}:%{version}-%{release}
Requires: seabios-bin
Requires: sgabios-bin
Requires: seavgabios-bin
%if %{have_edk2}
Requires: edk2-ovmf
%endif
%description system-x86-core
This package provides the QEMU system emulator for x86. When being run in a x86
machine that supports it, this package also provides the KVM virtualization
platform.


%package system-xtensa
Summary: QEMU system emulator for Xtensa
Requires: %{name}-system-xtensa-core = %{epoch}:%{version}-%{release}
%{requires_all_modules}
%description system-xtensa
This package provides the QEMU system emulator for Xtensa boards.

%package system-xtensa-core
Summary: QEMU system emulator for Xtensa
Requires: %{name}-common = %{epoch}:%{version}-%{release}
%description system-xtensa-core
This package provides the QEMU system emulator for Xtensa boards.




%prep
%setup -q -n qemu-%{version}%{?rcstr}
%autosetup -S git_am

%global qemu_kvm_build qemu_kvm_build
mkdir -p %{qemu_kvm_build}
%global static_builddir static_builddir
mkdir -p %{static_builddir}



%build
%define disable_everything         \\\
  --audio-drv-list=                \\\
  --disable-alsa                   \\\
  --disable-attr                   \\\
  --disable-auth-pam               \\\
  --disable-avx2                   \\\
  --disable-avx512f                \\\
  --disable-block-drv-whitelist-in-tools \\\
  --disable-bochs                  \\\
  --disable-bpf                    \\\
  --disable-brlapi                 \\\
  --disable-bsd-user               \\\
  --disable-bzip2                  \\\
  --disable-cap-ng                 \\\
  --disable-capstone               \\\
  --disable-cfi                    \\\
  --disable-cfi-debug              \\\
  --disable-cloop                  \\\
  --disable-cocoa                  \\\
  --disable-coreaudio              \\\
  --disable-coroutine-pool         \\\
  --disable-crypto-afalg           \\\
  --disable-curl                   \\\
  --disable-curses                 \\\
  --disable-dbus-display           \\\
  --disable-debug-info             \\\
  --disable-debug-mutex            \\\
  --disable-debug-tcg              \\\
  --disable-dmg                    \\\
  --disable-docs                   \\\
  --disable-dsound                 \\\
  --disable-fdt                    \\\
  --disable-fuse                   \\\
  --disable-fuse-lseek             \\\
  --disable-gcrypt                 \\\
  --disable-gettext                \\\
  --disable-gio                    \\\
  --disable-glusterfs              \\\
  --disable-gnutls                 \\\
  --disable-gtk                    \\\
  --disable-guest-agent            \\\
  --disable-guest-agent-msi        \\\
  --disable-hax                    \\\
  --disable-hvf                    \\\
  --disable-iconv                  \\\
  --disable-jack                   \\\
  --disable-kvm                    \\\
  --disable-l2tpv3                 \\\
  --disable-libdaxctl              \\\
  --disable-libiscsi               \\\
  --disable-libnfs                 \\\
  --disable-libpmem                \\\
  --disable-libssh                 \\\
  --disable-libudev                \\\
  --disable-libusb                 \\\
  --disable-linux-aio              \\\
  --disable-linux-io-uring         \\\
  --disable-linux-user             \\\
  --disable-live-block-migration   \\\
  --disable-lto                    \\\
  --disable-lzfse                  \\\
  --disable-lzo                    \\\
  --disable-malloc-trim            \\\
  --disable-membarrier             \\\
  --disable-modules                \\\
  --disable-module-upgrades        \\\
  --disable-mpath                  \\\
  --disable-multiprocess           \\\
  --disable-netmap                 \\\
  --disable-nettle                 \\\
  --disable-numa                   \\\
  --disable-nvmm                   \\\
  --disable-opengl                 \\\
  --disable-oss                    \\\
  --disable-pa                     \\\
  --disable-parallels              \\\
  --disable-pie                    \\\
  --disable-pvrdma                 \\\
  --disable-qcow1                  \\\
  --disable-qed                    \\\
  --disable-qom-cast-debug         \\\
  --disable-rbd                    \\\
  --disable-rdma                   \\\
  --disable-replication            \\\
  --disable-rng-none               \\\
  --disable-safe-stack             \\\
  --disable-sanitizers             \\\
  --disable-sdl                    \\\
  --disable-sdl-image              \\\
  --disable-seccomp                \\\
  --disable-selinux                \\\
  --disable-slirp                  \\\
  --disable-slirp-smbd             \\\
  --disable-smartcard              \\\
  --disable-snappy                 \\\
  --disable-sparse                 \\\
  --disable-spice                  \\\
  --disable-spice-protocol         \\\
  --disable-strip                  \\\
  --disable-system                 \\\
  --disable-tcg                    \\\
  --disable-tools                  \\\
  --disable-tpm                    \\\
  --disable-u2f                    \\\
  --disable-usb-redir              \\\
  --disable-user                   \\\
  --disable-vde                    \\\
  --disable-vdi                    \\\
  --disable-vhost-crypto           \\\
  --disable-vhost-kernel           \\\
  --disable-vhost-net              \\\
  --disable-vhost-scsi             \\\
  --disable-vhost-user             \\\
  --disable-vhost-user-blk-server  \\\
  --disable-vhost-vdpa             \\\
  --disable-vhost-vsock            \\\
  --disable-virglrenderer          \\\
  --disable-virtfs                 \\\
  --disable-virtiofsd              \\\
  --disable-vnc                    \\\
  --disable-vnc-jpeg               \\\
  --disable-vnc-png                \\\
  --disable-vnc-sasl               \\\
  --disable-vte                    \\\
  --disable-vvfat                  \\\
  --disable-werror                 \\\
  --disable-whpx                   \\\
  --disable-xen                    \\\
  --disable-xen-pci-passthrough    \\\
  --disable-xkbcommon              \\\
  --disable-zstd                   \\\
  --with-git-submodules=ignore     \\\
  --without-default-devices

run_configure() {
    ../configure  \
        --cc=%{__cc} \
        --cxx=/bin/false \
        --prefix="%{_prefix}" \
        --libdir="%{_libdir}" \
        --datadir="%{_datadir}" \
        --sysconfdir="%{_sysconfdir}" \
        --interp-prefix=%{_prefix}/qemu-%M \
        --localstatedir="%{_localstatedir}" \
        --docdir="%{_docdir}" \
        --libexecdir="%{_libexecdir}" \
        --extra-ldflags="%{build_ldflags}" \
%ifnarch %{arm}
        --extra-cflags="%{optflags}" \
%else
        --extra-cflags="%{optflags} -DSTAP_SDT_ARG_CONSTRAINT=g" \
%endif
        --with-pkgversion="%{name}-%{version}-%{release}" \
        --with-suffix="%{name}" \
        --firmwarepath="%firmwaredirs" \
        --meson="%{__meson}" \
        --enable-trace-backends=dtrace \
        --with-coroutine=ucontext \
        --with-git=git \
        --tls-priority=@QEMU,SYSTEM \
        %{disable_everything} \
        "$@"

    echo "config-host.mak contents:"
    echo "==="
    cat config-host.mak
    echo "==="
}


pushd %{qemu_kvm_build}
run_configure \
%if %{defined target_list}
  --target-list="%{target_list}" \
%endif
%if %{defined block_drivers_rw_list}
  --block-drv-rw-whitelist=%{block_drivers_rw_list} \
%endif
%if %{defined block_drivers_ro_list}
  --block-drv-ro-whitelist=%{block_drivers_ro_list} \
%endif
  --enable-alsa \
  --enable-attr \
%ifarch %{ix86} x86_64
  --enable-avx2 \
%endif
  --enable-bpf \
  --enable-cap-ng \
  --enable-capstone=auto \
  --enable-coroutine-pool \
  --enable-curl \
%if %{have_dbus_display}
  --enable-dbus-display \
%endif
  --enable-debug-info \
  --enable-docs \
%if %{have_fdt}
  --enable-fdt=system \
%endif
  --enable-gettext \
  --enable-gnutls \
  --enable-guest-agent \
  --enable-iconv \
%if %{have_jack}
  --enable-jack \
%endif
  --enable-kvm \
  --enable-l2tpv3 \
  --enable-libiscsi \
%if %{have_pmem}
  --enable-libpmem \
%endif
  --enable-libssh \
  --enable-libusb \
  --enable-libudev \
  --enable-linux-aio \
%if "%{_lto_cflags}" != "%{nil}"
  --enable-lto \
%endif
  --enable-lzo \
  --enable-malloc-trim \
  --enable-modules \
  --enable-mpath \
%if %{have_numactl}
  --enable-numa \
%endif
%if %{have_opengl}
  --enable-opengl \
%endif
  --enable-oss \
  --enable-pa \
  --enable-pie \
%if %{have_block_rbd}
  --enable-rbd \
%endif
%if %{have_librdma}
  --enable-rdma \
%endif
  --enable-seccomp \
  --enable-selinux \
  --enable-slirp=system \
  --enable-slirp-smbd \
  --enable-snappy \
  --enable-system \
  --enable-tcg \
  --enable-tools \
  --enable-tpm \
%if %{have_usbredir}
  --enable-usb-redir \
%endif
  --enable-virtiofsd \
  --enable-vhost-kernel \
  --enable-vhost-net \
  --enable-vhost-user \
  --enable-vhost-user-blk-server \
  --enable-vhost-vdpa \
  --enable-vhost-vsock \
  --enable-vnc \
  --enable-vnc-png \
  --enable-vnc-sasl \
%if %{enable_werror}
  --enable-werror \
%endif
  --enable-xkbcommon \
  \
  \
  --audio-drv-list=pa,sdl,alsa,%{?jack_drv}oss \
  --target-list-exclude=moxie-softmmu \
  --with-default-devices \
  --enable-auth-pam \
  --enable-bochs \
  --enable-brlapi \
  --enable-bzip2 \
  --enable-cloop \
  --enable-curses \
  --enable-dmg \
  --enable-fuse \
  --enable-gio \
%if %{have_block_gluster}
  --enable-glusterfs \
%endif
  --enable-gtk \
  --enable-libdaxctl \
%if %{have_block_nfs}
  --enable-libnfs \
%endif
  --enable-libudev \
%if %{have_liburing}
  --enable-linux-io-uring \
%endif
  --enable-linux-user \
  --enable-live-block-migration \
  --enable-multiprocess \
  --enable-vnc-jpeg \
  --enable-parallels \
%if %{have_librdma}
  --enable-pvrdma \
%endif
  --enable-qcow1 \
  --enable-qed \
  --enable-qom-cast-debug \
  --enable-replication \
  --enable-sdl \
%if %{have_sdl_image}
  --enable-sdl-image \
%endif
%if %{have_libcacard}
  --enable-smartcard \
%endif
%if %{have_spice}
  --enable-spice \
  --enable-spice-protocol \
%endif
  --enable-usb-redir \
  --enable-vdi \
  --enable-vhost-crypto \
  --enable-vhost-scsi \
%if %{have_virgl}
  --enable-virglrenderer \
%endif
  --enable-virtfs \
  --enable-vnc-jpeg \
  --enable-vte \
  --enable-vvfat \
%if %{have_xen}
  --enable-xen \
  --enable-xen-pci-passthrough \
%endif
  --enable-zstd \


%if %{tools_only}
%make_build qemu-img
%make_build qemu-io
%make_build qemu-nbd
%make_build storage-daemon/qemu-storage-daemon

%make_build docs/qemu-img.1
%make_build docs/qemu-nbd.8
%make_build docs/qemu-storage-daemon.1
%make_build docs/qemu-storage-daemon-qmp-ref.7

%make_build qga/qemu-ga
%make_build docs/qemu-ga.8
# endif tools_only
%endif


%if !%{tools_only}
%make_build
popd

# Fedora build for qemu-user-static
%if %{user_static}
pushd %{static_builddir}

run_configure \
  --enable-attr \
  --enable-linux-user \
  --enable-tcg \
  --disable-install-blobs \
  --static

%make_build
popd  # static
%endif
# endif !tools_only
%endif



%install
# Install qemu-guest-agent service and udev rules
install -D -m 0644 %{_sourcedir}/qemu-guest-agent.service %{buildroot}%{_unitdir}/qemu-guest-agent.service
install -D -m 0644 %{_sourcedir}/qemu-ga.sysconfig %{buildroot}%{_sysconfdir}/sysconfig/qemu-ga
install -D -m 0644 %{_sourcedir}/99-qemu-guest-agent.rules %{buildroot}%{_udevrulesdir}/99-qemu-guest-agent.rules


# Install qemu-ga fsfreeze bits
mkdir -p %{buildroot}%{_sysconfdir}/qemu-ga/fsfreeze-hook.d
install -p scripts/qemu-guest-agent/fsfreeze-hook %{buildroot}%{_sysconfdir}/qemu-ga/fsfreeze-hook
mkdir -p %{buildroot}%{_datadir}/%{name}/qemu-ga/fsfreeze-hook.d/
install -p -m 0644 scripts/qemu-guest-agent/fsfreeze-hook.d/*.sample %{buildroot}%{_datadir}/%{name}/qemu-ga/fsfreeze-hook.d/
mkdir -p -v %{buildroot}%{_localstatedir}/log/qemu-ga/


%if %{tools_only}
pushd %{qemu_kvm_build}
install -D -p -m 0755 qga/qemu-ga %{buildroot}%{_bindir}/qemu-ga
install -D -p -m 0755 qemu-img %{buildroot}%{_bindir}/qemu-img
install -D -p -m 0755 qemu-io %{buildroot}%{_bindir}/qemu-io
install -D -p -m 0755 qemu-nbd %{buildroot}%{_bindir}/qemu-nbd
install -D -p -m 0755 storage-daemon/qemu-storage-daemon %{buildroot}%{_bindir}/qemu-storage-daemon

mkdir -p %{buildroot}%{_mandir}/man1/
mkdir -p %{buildroot}%{_mandir}/man7/
mkdir -p %{buildroot}%{_mandir}/man8/

install -D -p -m 644 docs/qemu-img.1* %{buildroot}%{_mandir}/man1
install -D -p -m 644 docs/qemu-nbd.8* %{buildroot}%{_mandir}/man8
install -D -p -m 644 docs/qemu-storage-daemon.1* %{buildroot}%{_mandir}/man1
install -D -p -m 644 docs/qemu-storage-daemon-qmp-ref.7* %{buildroot}%{_mandir}/man7
install -D -p -m 644 docs/qemu-ga.8* %{buildroot}%{_mandir}/man8
popd
# endif tools_only
%endif


%if !%{tools_only}
# Install rules to use the bridge helper with libvirt's virbr0
install -D -m 0644 %{_sourcedir}/bridge.conf %{buildroot}%{_sysconfdir}/%{name}/bridge.conf

# Install qemu-pr-helper service
install -m 0644 contrib/systemd/qemu-pr-helper.service %{buildroot}%{_unitdir}
install -m 0644 contrib/systemd/qemu-pr-helper.socket %{buildroot}%{_unitdir}

%if %{have_memlock_limits}
install -D -p -m 644 %{_sourcedir}/95-kvm-memlock.conf %{buildroot}%{_sysconfdir}/security/limits.d/95-kvm-memlock.conf
%endif

%if %{have_kvm}
install -D -p -m 0644 %{_sourcedir}/vhost.conf %{buildroot}%{_sysconfdir}/modprobe.d/vhost.conf
install -D -p -m 0644 %{modprobe_kvm_conf} %{buildroot}%{_sysconfdir}/modprobe.d/kvm.conf
%endif

# Copy some static data into place
install -D -p -m 0644 -t %{buildroot}%{qemudocdir} README.rst COPYING COPYING.LIB LICENSE docs/interop/qmp-spec.txt
install -D -p -m 0644 qemu.sasl %{buildroot}%{_sysconfdir}/sasl2/%{name}.conf

install -m 0644 scripts/dump-guest-memory.py %{buildroot}%{_datadir}/%{name}


# Install simpletrace
install -m 0755 scripts/simpletrace.py %{buildroot}%{_datadir}/%{name}/simpletrace.py
mkdir -p %{buildroot}%{_datadir}/%{name}/tracetool
install -m 0644 -t %{buildroot}%{_datadir}/%{name}/tracetool scripts/tracetool/*.py
mkdir -p %{buildroot}%{_datadir}/%{name}/tracetool/backend
install -m 0644 -t %{buildroot}%{_datadir}/%{name}/tracetool/backend scripts/tracetool/backend/*.py
mkdir -p %{buildroot}%{_datadir}/%{name}/tracetool/format
install -m 0644 -t %{buildroot}%{_datadir}/%{name}/tracetool/format scripts/tracetool/format/*.py


# Create new directories and put them all under tests-src
mkdir -p %{buildroot}%{testsdir}/python
mkdir -p %{buildroot}%{testsdir}/tests
mkdir -p %{buildroot}%{testsdir}/tests/avocado
mkdir -p %{buildroot}%{testsdir}/tests/qemu-iotests
mkdir -p %{buildroot}%{testsdir}/scripts/qmp

# Install avocado_qemu tests
cp -R %{qemu_kvm_build}/tests/avocado/* %{buildroot}%{testsdir}/tests/avocado/

# Install qemu.py and qmp/ scripts required to run avocado_qemu tests
cp -R %{qemu_kvm_build}/python/qemu %{buildroot}%{testsdir}/python
cp -R %{qemu_kvm_build}/scripts/qmp/* %{buildroot}%{testsdir}/scripts/qmp
install -p -m 0755 tests/Makefile.include %{buildroot}%{testsdir}/tests/

# Install qemu-iotests
cp -R tests/qemu-iotests/* %{buildroot}%{testsdir}/tests/qemu-iotests/
cp -ur %{qemu_kvm_build}/tests/qemu-iotests/* %{buildroot}%{testsdir}/tests/qemu-iotests/

# Install our custom tests README
install -p -m 0644 %{_sourcedir}/README.tests %{buildroot}%{testsdir}/README


# Do the actual qemu tree install
pushd %{qemu_kvm_build}
%make_install
popd


# We need to make the block device modules and other qemu SO files executable
# otherwise RPM won't pick up their dependencies.
chmod +x %{buildroot}%{_libdir}/%{name}/*.so

# Remove docs we don't care about
find %{buildroot}%{qemudocdir} -name .buildinfo -delete
rm -rf %{buildroot}%{qemudocdir}/specs


# Provided by package openbios
rm -rf %{buildroot}%{_datadir}/%{name}/openbios-ppc
rm -rf %{buildroot}%{_datadir}/%{name}/openbios-sparc32
rm -rf %{buildroot}%{_datadir}/%{name}/openbios-sparc64
# Provided by package SLOF
rm -rf %{buildroot}%{_datadir}/%{name}/slof.bin
# Provided by package ipxe
rm -rf %{buildroot}%{_datadir}/%{name}/pxe*rom
rm -rf %{buildroot}%{_datadir}/%{name}/efi*rom
# Provided by package seavgabios
rm -rf %{buildroot}%{_datadir}/%{name}/vgabios*bin
# Provided by package seabios
rm -rf %{buildroot}%{_datadir}/%{name}/bios*.bin
# Provided by package sgabios
rm -rf %{buildroot}%{_datadir}/%{name}/sgabios.bin
# Provided by edk2
rm -rf %{buildroot}%{_datadir}/%{name}/edk2*
rm -rf %{buildroot}%{_datadir}/%{name}/firmware


# Fedora specific stuff below
%find_lang %{name}

# Generate qemu-system-* man pages
chmod -x %{buildroot}%{_mandir}/man1/*
for emu in %{buildroot}%{_bindir}/qemu-system-*; do
    ln -sf qemu.1.gz %{buildroot}%{_mandir}/man1/$(basename $emu).1.gz
 done

# Install kvm specific source bits, and qemu-kvm manpage
%if %{need_qemu_kvm}
ln -sf qemu.1.gz %{buildroot}%{_mandir}/man1/qemu-kvm.1.gz
ln -sf qemu-system-x86_64 %{buildroot}%{_bindir}/qemu-kvm
   %endif


# Install binfmt
%global binfmt_dir %{buildroot}%{_exec_prefix}/lib/binfmt.d
mkdir -p %{binfmt_dir}

./scripts/qemu-binfmt-conf.sh --systemd ALL --exportdir %{binfmt_dir} --qemu-path %{_bindir}
for i in %{binfmt_dir}/*; do mv $i $(echo $i | sed 's/.conf/-dynamic.conf/'); done


# Install qemu-user-static tree
%if %{user_static}
%define static_buildroot %{buildroot}/static/
mkdir -p %{static_buildroot}

pushd %{static_builddir}
make DESTDIR=%{static_buildroot} install

# Duplicates what the main build installs and we don't
# need second copy with a -static suffix
rm -f %{static_buildroot}%{_bindir}/qemu-trace-stap
popd  # static

# Rename all QEMU user emulators to have a -static suffix
for src in %{static_buildroot}%{_bindir}/qemu-*; do
    mv $src %{buildroot}%{_bindir}/$(basename $src)-static; done

# Rename trace files to match -static suffix
for src in %{static_buildroot}%{_datadir}/systemtap/tapset/qemu-*.stp; do
  dst=`echo $src | sed -e 's/.stp/-static.stp/'`
  mv $src $dst
  perl -i -p -e 's/(qemu-\w+)/$1-static/g; s/(qemu\.user\.\w+)/$1.static/g' $dst
  mv $dst %{buildroot}%{_datadir}/systemtap/tapset
 done

for regularfmt in %{binfmt_dir}/*; do
  staticfmt="$(echo $regularfmt | sed 's/-dynamic/-static/g')"
  cat $regularfmt | tr -d '\n' | sed "s/:$/-static:F/" > $staticfmt
  done

rm -rf %{static_buildroot}
# endif user_static
 %endif
# end Fedora specific
# endif !tools_only
%endif



%check
%if %{with check}
%if !%{tools_only}

pushd %{qemu_kvm_build}
echo "Testing %{name}-build"
# 2022-06: ppc64le random qtest segfaults with no discernable pattern
%ifnarch %{power64}
%make_build check
%endif

popd

# endif !tools_only
%endif
# endif with check
%endif


%post -n qemu-guest-agent
%systemd_post qemu-guest-agent.service
%preun -n qemu-guest-agent
%systemd_preun qemu-guest-agent.service
%postun -n qemu-guest-agent
%systemd_postun_with_restart qemu-guest-agent.service


%if !%{tools_only}
%post common
getent group kvm >/dev/null || groupadd -g 36 -r kvm
getent group qemu >/dev/null || groupadd -g 107 -r qemu
getent passwd qemu >/dev/null || \
useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
  -c "qemu user" qemu






%post user-binfmt
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-binfmt
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%if %{user_static}
%post user-static-aarch64
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-aarch64
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-alpha
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-alpha
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-arm
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-arm
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-cris
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-cris
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-hexagon
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-hexagon
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-hppa
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-hppa
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-m68k
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-m68k
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-microblaze
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-microblaze
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-mips
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-mips
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-nios2
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-nios2
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-or1k
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-or1k
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-ppc
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-ppc
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-riscv
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-riscv
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-s390x
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-s390x
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-sh4
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-sh4
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%endif

%post user-static-sparc
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-sparc
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-x86
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-x86
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

%post user-static-xtensa
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
%postun user-static-xtensa
/bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :

# endif !tools_only
%endif



%files -n qemu-img
%{_bindir}/qemu-img
%{_bindir}/qemu-io
%{_bindir}/qemu-nbd
%{_bindir}/qemu-storage-daemon
%{_mandir}/man1/qemu-img.1*
%{_mandir}/man8/qemu-nbd.8*
%{_mandir}/man1/qemu-storage-daemon.1*
%{_mandir}/man7/qemu-storage-daemon-qmp-ref.7*


%files -n qemu-guest-agent
%doc COPYING README.rst
%{_bindir}/qemu-ga
%{_mandir}/man8/qemu-ga.8*
%{_unitdir}/qemu-guest-agent.service
%{_udevrulesdir}/99-qemu-guest-agent.rules
%config(noreplace) %{_sysconfdir}/sysconfig/qemu-ga
%{_sysconfdir}/qemu-ga
%{_datadir}/%{name}/qemu-ga
%dir %{_localstatedir}/log/qemu-ga


%if !%{tools_only}
%files
# Deliberately empty


%files -n qemu-pr-helper
%{_bindir}/qemu-pr-helper
%{_unitdir}/qemu-pr-helper.service
%{_unitdir}/qemu-pr-helper.socket
%{_mandir}/man8/qemu-pr-helper.8*


%files -n qemu-virtiofsd
%{_mandir}/man1/virtiofsd.1*
%{_libexecdir}/virtiofsd
%{_datadir}/qemu/vhost-user/50-qemu-virtiofsd.json


%files tools
%{_bindir}/qemu-keymap
%{_bindir}/qemu-edid
%{_bindir}/qemu-trace-stap
%{_datadir}/%{name}/simpletrace.py*
%{_datadir}/%{name}/tracetool/*.py*
%{_datadir}/%{name}/tracetool/backend/*.py*
%{_datadir}/%{name}/tracetool/format/*.py*
%{_datadir}/%{name}/dump-guest-memory.py*
%{_datadir}/%{name}/trace-events-all
%{_mandir}/man1/qemu-trace-stap.1*
# Fedora specific
%{_bindir}/elf2dmp


%files docs
%doc %{qemudocdir}


%files common -f %{name}.lang
%license COPYING COPYING.LIB LICENSE
%dir %{_datadir}/%{name}/
%dir %{_datadir}/%{name}/vhost-user/
%{_datadir}/icons/*
%{_datadir}/%{name}/keymaps/
%{_datadir}/%{name}/linuxboot_dma.bin
%attr(4755, -, -) %{_libexecdir}/qemu-bridge-helper
%{_mandir}/man1/%{name}.1*
%{_mandir}/man7/qemu-block-drivers.7*
%{_mandir}/man7/qemu-cpu-models.7*
%{_mandir}/man7/qemu-ga-ref.7*
%{_mandir}/man7/qemu-qmp-ref.7*
%dir %{_sysconfdir}/%{name}
%config(noreplace) %{_sysconfdir}/%{name}/bridge.conf
%if %{have_kvm}
%config(noreplace) %{_sysconfdir}/modprobe.d/kvm.conf
%config(noreplace) %{_sysconfdir}/modprobe.d/vhost.conf
%endif
%config(noreplace) %{_sysconfdir}/sasl2/%{name}.conf


# Fedora specific
%{_datadir}/applications/qemu.desktop
%exclude %{_datadir}/%{name}/qemu-nsis.bmp
%{_libexecdir}/virtfs-proxy-helper
%{_mandir}/man1/virtfs-proxy-helper.1*


%files tests
%{testsdir}
%{_libdir}/%{name}/accel-qtest-*.so

%files block-curl
%{_libdir}/%{name}/block-curl.so
%files block-iscsi
%{_libdir}/%{name}/block-iscsi.so
%if %{have_block_rbd}
%files block-rbd
%{_libdir}/%{name}/block-rbd.so
%endif
%files block-ssh
%{_libdir}/%{name}/block-ssh.so

%if %{have_opengl}
%files ui-opengl
%{_libdir}/%{name}/ui-opengl.so
%endif


%files block-dmg
%{_libdir}/%{name}/block-dmg-bz2.so
%if %{have_block_gluster}
%files block-gluster
%{_libdir}/%{name}/block-gluster.so
%endif
%if %{have_block_nfs}
%files block-nfs
%{_libdir}/%{name}/block-nfs.so
%endif

%files audio-alsa
%{_libdir}/%{name}/audio-alsa.so
%if %{have_dbus_display}
%files audio-dbus
%{_libdir}/%{name}/audio-dbus.so
%endif
%files audio-oss
%{_libdir}/%{name}/audio-oss.so
%files audio-pa
%{_libdir}/%{name}/audio-pa.so
%files audio-sdl
%{_libdir}/%{name}/audio-sdl.so
%if %{have_jack}
%files audio-jack
%{_libdir}/%{name}/audio-jack.so
%endif


%files ui-curses
%{_libdir}/%{name}/ui-curses.so
%if %{have_dbus_display}
%files ui-dbus
%{_libdir}/%{name}/ui-dbus.so
%endif
%files ui-gtk
%{_libdir}/%{name}/ui-gtk.so
%files ui-sdl
%{_libdir}/%{name}/ui-sdl.so
%files ui-egl-headless
%{_libdir}/%{name}/ui-egl-headless.so

%files char-baum
%{_libdir}/%{name}/chardev-baum.so


%files device-display-virtio-gpu
%{_libdir}/%{name}/hw-display-virtio-gpu.so
%files device-display-virtio-gpu-gl
%{_libdir}/%{name}/hw-display-virtio-gpu-gl.so
%files device-display-virtio-gpu-pci
%{_libdir}/%{name}/hw-display-virtio-gpu-pci.so
%files device-display-virtio-gpu-pci-gl
%{_libdir}/%{name}/hw-display-virtio-gpu-pci-gl.so
%files device-display-virtio-gpu-ccw
%{_libdir}/%{name}/hw-s390x-virtio-gpu-ccw.so
%files device-display-virtio-vga
%{_libdir}/%{name}/hw-display-virtio-vga.so
%files device-display-virtio-vga-gl
%{_libdir}/%{name}/hw-display-virtio-vga-gl.so
%files device-usb-host
%{_libdir}/%{name}/hw-usb-host.so
%files device-usb-redirect
%{_libdir}/%{name}/hw-usb-redirect.so
%if %{have_libcacard}
%files device-usb-smartcard
%{_libdir}/%{name}/hw-usb-smartcard.so
%endif


%if %{have_virgl}
%files device-display-vhost-user-gpu
%{_datadir}/%{name}/vhost-user/50-qemu-gpu.json
%{_libexecdir}/vhost-user-gpu
%endif

%if %{have_spice}
%files audio-spice
%{_libdir}/%{name}/audio-spice.so
%files char-spice
%{_libdir}/%{name}/chardev-spice.so
%files device-display-qxl
%{_libdir}/%{name}/hw-display-qxl.so
%files ui-spice-core
%{_libdir}/%{name}/ui-spice-core.so
%files ui-spice-app
%{_libdir}/%{name}/ui-spice-app.so
%endif


%if %{have_kvm}
%files kvm
# Deliberately empty

%files kvm-core
# Deliberately empty
%endif


%files user
%{_bindir}/qemu-i386
%{_bindir}/qemu-x86_64
%{_bindir}/qemu-aarch64
%{_bindir}/qemu-aarch64_be
%{_bindir}/qemu-alpha
%{_bindir}/qemu-arm
%{_bindir}/qemu-armeb
%{_bindir}/qemu-cris
%{_bindir}/qemu-hppa
%{_bindir}/qemu-hexagon
%{_bindir}/qemu-m68k
%{_bindir}/qemu-microblaze
%{_bindir}/qemu-microblazeel
%{_bindir}/qemu-mips
%{_bindir}/qemu-mipsel
%{_bindir}/qemu-mips64
%{_bindir}/qemu-mips64el
%{_bindir}/qemu-mipsn32
%{_bindir}/qemu-mipsn32el
%{_bindir}/qemu-nios2
%{_bindir}/qemu-or1k
%{_bindir}/qemu-ppc
%{_bindir}/qemu-ppc64
%{_bindir}/qemu-ppc64le
%{_bindir}/qemu-riscv32
%{_bindir}/qemu-riscv64
%{_bindir}/qemu-s390x
%{_bindir}/qemu-sh4
%{_bindir}/qemu-sh4eb
%{_bindir}/qemu-sparc
%{_bindir}/qemu-sparc32plus
%{_bindir}/qemu-sparc64
%{_bindir}/qemu-xtensa
%{_bindir}/qemu-xtensaeb

%{_datadir}/systemtap/tapset/qemu-i386*.stp
%{_datadir}/systemtap/tapset/qemu-x86_64*.stp
%{_datadir}/systemtap/tapset/qemu-aarch64*.stp
%{_datadir}/systemtap/tapset/qemu-alpha*.stp
%{_datadir}/systemtap/tapset/qemu-arm*.stp
%{_datadir}/systemtap/tapset/qemu-cris*.stp
%{_datadir}/systemtap/tapset/qemu-hppa*.stp
%{_datadir}/systemtap/tapset/qemu-hexagon*.stp
%{_datadir}/systemtap/tapset/qemu-m68k*.stp
%{_datadir}/systemtap/tapset/qemu-microblaze*.stp
%{_datadir}/systemtap/tapset/qemu-mips*.stp
%{_datadir}/systemtap/tapset/qemu-nios2*.stp
%{_datadir}/systemtap/tapset/qemu-or1k*.stp
%{_datadir}/systemtap/tapset/qemu-ppc*.stp
%{_datadir}/systemtap/tapset/qemu-riscv*.stp
%{_datadir}/systemtap/tapset/qemu-s390x*.stp
%{_datadir}/systemtap/tapset/qemu-sh4*.stp
%{_datadir}/systemtap/tapset/qemu-sparc*.stp
%{_datadir}/systemtap/tapset/qemu-xtensa*.stp


%files user-binfmt
%{_exec_prefix}/lib/binfmt.d/qemu-*-dynamic.conf

%if %{user_static}
%files user-static
%license COPYING COPYING.LIB LICENSE

%files user-static-aarch64
%{_bindir}/qemu-aarch64-static
%{_bindir}/qemu-aarch64_be-static
%{_datadir}/systemtap/tapset/qemu-aarch64.stp
%{_datadir}/systemtap/tapset/qemu-aarch64_be-static.stp
%ifnarch aarch64
%{_exec_prefix}/lib/binfmt.d/qemu-aarch64-static.conf
%endif
%{_exec_prefix}/lib/binfmt.d/qemu-aarch64_be-static.conf

%files user-static-alpha
%{_bindir}/qemu-alpha-static
%{_datadir}/systemtap/tapset/qemu-alpha-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-alpha-static.conf

%files user-static-arm
%{_bindir}/qemu-arm-static
%{_bindir}/qemu-armeb-static
%{_datadir}/systemtap/tapset/qemu-armeb-static.stp
%ifnarch aarch64
%{_exec_prefix}/lib/binfmt.d/qemu-arm-static.conf
%endif
%{_exec_prefix}/lib/binfmt.d/qemu-armeb-static.conf

%files user-static-cris
%{_bindir}/qemu-cris-static
%{_datadir}/systemtap/tapset/qemu-cris-static.stp

%files user-static-hexagon
%{_bindir}/qemu-hexagon-static
%{_datadir}/systemtap/tapset/qemu-hexagon-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-hexagon-static.conf

%files user-static-hppa
%{_bindir}/qemu-hppa-static
%{_datadir}/systemtap/tapset/qemu-hppa-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-hppa-static.conf

%files user-static-m68k
%{_bindir}/qemu-m68k-static
%{_datadir}/systemtap/tapset/qemu-m68k-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-m68k-static.conf

%files user-static-microblaze
%{_bindir}/qemu-microblaze-static
%{_bindir}/qemu-microblazeel-static
%{_datadir}/systemtap/tapset/qemu-microblaze-static.stp
%{_datadir}/systemtap/tapset/qemu-microblazeel-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-microblaze-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-microblazeel-static.conf

%files user-static-mips
%{_bindir}/qemu-mips-static
%{_bindir}/qemu-mips64-static
%{_bindir}/qemu-mips64el-static
%{_bindir}/qemu-mipsel-static
%{_bindir}/qemu-mipsn32-static
%{_bindir}/qemu-mipsn32el-static
%{_datadir}/systemtap/tapset/qemu-mips-static.stp
%{_datadir}/systemtap/tapset/qemu-mips64-static.stp
%{_datadir}/systemtap/tapset/qemu-mips64el-static.stp
%{_datadir}/systemtap/tapset/qemu-mipsel-static.stp
%{_datadir}/systemtap/tapset/qemu-mipsn32-static.stp
%{_datadir}/systemtap/tapset/qemu-mipsn32el-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-mips-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-mips64-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-mips64el-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-mipsel-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-mipsn32-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-mipsn32el-static.conf

%files user-static-nios2
%{_bindir}/qemu-nios2-static
%{_datadir}/systemtap/tapset/qemu-nios2-static.stp

%files user-static-or1k
%{_bindir}/qemu-or1k-static
%{_datadir}/systemtap/tapset/qemu-or1k-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-or1k-static.conf

%files user-static-ppc
%{_bindir}/qemu-ppc-static
%{_bindir}/qemu-ppc64-static
%{_bindir}/qemu-ppc64le-static
%{_datadir}/systemtap/tapset/qemu-ppc-static.stp
%{_datadir}/systemtap/tapset/qemu-ppc64-static.stp
%{_datadir}/systemtap/tapset/qemu-ppc64le-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-ppc-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-ppc64-static.conf
%ifnarch ppc64le
%{_exec_prefix}/lib/binfmt.d/qemu-ppc64le-static.conf
%endif

%files user-static-riscv
%{_bindir}/qemu-riscv32-static
%{_bindir}/qemu-riscv64-static
%{_datadir}/systemtap/tapset/qemu-riscv32-static.stp
%{_datadir}/systemtap/tapset/qemu-riscv64-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-riscv32-static.conf
%ifnarch riscv64
%{_exec_prefix}/lib/binfmt.d/qemu-riscv64-static.conf
%endif

%files user-static-s390x
%{_bindir}/qemu-s390x-static
%{_datadir}/systemtap/tapset/qemu-s390x-static.stp
%ifnarch s390x
%{_exec_prefix}/lib/binfmt.d/qemu-s390x-static.conf
%endif

%files user-static-sh4
%{_bindir}/qemu-sh4-static
%{_bindir}/qemu-sh4eb-static
%{_datadir}/systemtap/tapset/qemu-sh4-static.stp
%{_datadir}/systemtap/tapset/qemu-sh4eb-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-sh4-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-sh4eb-static.conf

%files user-static-sparc
%{_bindir}/qemu-sparc-static
%{_bindir}/qemu-sparc32plus-static
%{_bindir}/qemu-sparc64-static
%{_datadir}/systemtap/tapset/qemu-sparc-static.stp
%{_datadir}/systemtap/tapset/qemu-sparc32plus-static.stp
%{_datadir}/systemtap/tapset/qemu-sparc64-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-sparc-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-sparc32plus-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-sparc64-static.conf

%files user-static-x86
%{_bindir}/qemu-i386-static
%{_bindir}/qemu-x86_64-static
%{_datadir}/systemtap/tapset/qemu-i386-static.stp
%{_datadir}/systemtap/tapset/qemu-x86_64-static.stp
%ifnarch %{ix86} x86_64
%{_exec_prefix}/lib/binfmt.d/qemu-i386-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-i486-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-x86_64-static.conf
%endif

%files user-static-xtensa
%{_bindir}/qemu-xtensa-static
%{_bindir}/qemu-xtensaeb-static
%{_datadir}/systemtap/tapset/qemu-xtensa-static.stp
%{_datadir}/systemtap/tapset/qemu-xtensaeb-static.stp
%{_exec_prefix}/lib/binfmt.d/qemu-xtensa-static.conf
%{_exec_prefix}/lib/binfmt.d/qemu-xtensaeb-static.conf

%endif


%files system-aarch64
%files system-aarch64-core
%{_bindir}/qemu-system-aarch64
%{_datadir}/systemtap/tapset/qemu-system-aarch64*.stp
%{_mandir}/man1/qemu-system-aarch64.1*


%files system-alpha
%files system-alpha-core
%{_bindir}/qemu-system-alpha
%{_datadir}/systemtap/tapset/qemu-system-alpha*.stp
%{_mandir}/man1/qemu-system-alpha.1*
%{_datadir}/%{name}/palcode-clipper


%files system-arm
%files system-arm-core
%{_bindir}/qemu-system-arm
%{_datadir}/%{name}/npcm7xx_bootrom.bin
%{_datadir}/systemtap/tapset/qemu-system-arm*.stp
%{_mandir}/man1/qemu-system-arm.1*


%files system-avr
%files system-avr-core
%{_bindir}/qemu-system-avr
%{_datadir}/systemtap/tapset/qemu-system-avr*.stp
%{_mandir}/man1/qemu-system-avr.1*


%files system-cris
%files system-cris-core
%{_bindir}/qemu-system-cris
%{_datadir}/systemtap/tapset/qemu-system-cris*.stp
%{_mandir}/man1/qemu-system-cris.1*


%files system-hppa
%files system-hppa-core
%{_bindir}/qemu-system-hppa
%{_datadir}/systemtap/tapset/qemu-system-hppa*.stp
%{_mandir}/man1/qemu-system-hppa.1*
%{_datadir}/%{name}/hppa-firmware.img


%files system-m68k
%files system-m68k-core
%{_bindir}/qemu-system-m68k
%{_datadir}/systemtap/tapset/qemu-system-m68k*.stp
%{_mandir}/man1/qemu-system-m68k.1*


%files system-microblaze
%files system-microblaze-core
%{_bindir}/qemu-system-microblaze
%{_bindir}/qemu-system-microblazeel
%{_datadir}/systemtap/tapset/qemu-system-microblaze*.stp
%{_mandir}/man1/qemu-system-microblaze.1*
%{_mandir}/man1/qemu-system-microblazeel.1*
%{_datadir}/%{name}/petalogix*.dtb


%files system-mips
%files system-mips-core
%{_bindir}/qemu-system-mips
%{_bindir}/qemu-system-mipsel
%{_bindir}/qemu-system-mips64
%{_bindir}/qemu-system-mips64el
%{_datadir}/systemtap/tapset/qemu-system-mips*.stp
%{_mandir}/man1/qemu-system-mips.1*
%{_mandir}/man1/qemu-system-mipsel.1*
%{_mandir}/man1/qemu-system-mips64el.1*
%{_mandir}/man1/qemu-system-mips64.1*


%files system-nios2
%files system-nios2-core
%{_bindir}/qemu-system-nios2
%{_datadir}/systemtap/tapset/qemu-system-nios2*.stp
%{_mandir}/man1/qemu-system-nios2.1*


%files system-or1k
%files system-or1k-core
%{_bindir}/qemu-system-or1k
%{_datadir}/systemtap/tapset/qemu-system-or1k*.stp
%{_mandir}/man1/qemu-system-or1k.1*


%files system-ppc
%files system-ppc-core
%{_bindir}/qemu-system-ppc
%{_bindir}/qemu-system-ppc64
%{_datadir}/systemtap/tapset/qemu-system-ppc*.stp
%{_mandir}/man1/qemu-system-ppc.1*
%{_mandir}/man1/qemu-system-ppc64.1*
%{_datadir}/%{name}/bamboo.dtb
%{_datadir}/%{name}/canyonlands.dtb
%{_datadir}/%{name}/qemu_vga.ndrv
%{_datadir}/%{name}/skiboot.lid
%{_datadir}/%{name}/u-boot.e500
%{_datadir}/%{name}/u-boot-sam460-20100605.bin
%{_datadir}/%{name}/vof*.bin
%if %{have_memlock_limits}
%{_sysconfdir}/security/limits.d/95-kvm-memlock.conf
%endif


%files system-riscv
%files system-riscv-core
%{_bindir}/qemu-system-riscv32
%{_bindir}/qemu-system-riscv64
%{_datadir}/%{name}/opensbi-riscv*.bin
%{_datadir}/systemtap/tapset/qemu-system-riscv*.stp
%{_mandir}/man1/qemu-system-riscv*.1*


%files system-rx
%files system-rx-core
%{_bindir}/qemu-system-rx
%{_datadir}/systemtap/tapset/qemu-system-rx*.stp
%{_mandir}/man1/qemu-system-rx.1*


%files system-s390x
%files system-s390x-core
%{_bindir}/qemu-system-s390x
%{_datadir}/systemtap/tapset/qemu-system-s390x*.stp
%{_mandir}/man1/qemu-system-s390x.1*
%{_datadir}/%{name}/s390-ccw.img
%{_datadir}/%{name}/s390-netboot.img


%files system-sh4
%files system-sh4-core
%{_bindir}/qemu-system-sh4
%{_bindir}/qemu-system-sh4eb
%{_datadir}/systemtap/tapset/qemu-system-sh4*.stp
%{_mandir}/man1/qemu-system-sh4.1*
%{_mandir}/man1/qemu-system-sh4eb.1*


%files system-sparc
%files system-sparc-core
%{_bindir}/qemu-system-sparc
%{_bindir}/qemu-system-sparc64
%{_datadir}/systemtap/tapset/qemu-system-sparc*.stp
%{_mandir}/man1/qemu-system-sparc.1*
%{_mandir}/man1/qemu-system-sparc64.1*
%{_datadir}/%{name}/QEMU,tcx.bin
%{_datadir}/%{name}/QEMU,cgthree.bin


%files system-tricore
%files system-tricore-core
%{_bindir}/qemu-system-tricore
%{_datadir}/systemtap/tapset/qemu-system-tricore*.stp
%{_mandir}/man1/qemu-system-tricore.1*


%files system-x86
%files system-x86-core
%{_bindir}/qemu-system-i386
%{_bindir}/qemu-system-x86_64
%{_libdir}/%{name}/accel-tcg-i386.so
%{_libdir}/%{name}/accel-tcg-x86_64.so
%{_datadir}/systemtap/tapset/qemu-system-i386*.stp
%{_datadir}/systemtap/tapset/qemu-system-x86_64*.stp
%{_mandir}/man1/qemu-system-i386.1*
%{_mandir}/man1/qemu-system-x86_64.1*
%{_datadir}/%{name}/kvmvapic.bin
%{_datadir}/%{name}/linuxboot.bin
%{_datadir}/%{name}/multiboot.bin
%{_datadir}/%{name}/multiboot_dma.bin
%{_datadir}/%{name}/pvh.bin
%{_datadir}/%{name}/qboot.rom
%if %{need_qemu_kvm}
%{_bindir}/qemu-kvm
%{_mandir}/man1/qemu-kvm.1*
%endif


%files system-xtensa
%files system-xtensa-core
%{_bindir}/qemu-system-xtensa
%{_bindir}/qemu-system-xtensaeb
%{_datadir}/systemtap/tapset/qemu-system-xtensa*.stp
%{_mandir}/man1/qemu-system-xtensa.1*
%{_mandir}/man1/qemu-system-xtensaeb.1*
# endif !tools_only
%endif


%changelog
* Sat Jun 11 2022 Cole Robinson <crobinso@redhat.com> - 7.0.0-6
- Adjust for Xen dropping 32bit arches

* Mon Jun 06 2022 Daniel J Walsh <dwalsh@redhat.com> - 7.0.0-5
- Split qemu-user-static into per-arch subpackages (bz 2061584)

* Thu Jun 02 2022 Cole Robinson <crobinso@redhat.com> - 7.0.0-4
- Fix virtio-scsi hang (bz #2079347)
- Add dep on virtio-gpu-ccw (bz #2091964)

* Tue May 17 2022 Cole Robinson <crobinso@redhat.com> - 7.0.0-3
- Make qemu-common own /usr/share/qemu/vhost-user (bz 2086836)
- Add virtiofsd to qemu-system-* deps (bz 2083155)
- Add qemu-pr-helper to qemu-system-* deps

* Tue May  3 2022 Daniel P. Berrangé <berrange@redhat.com> - 7.0.0-2
- Drop redundant qemu-trace-stap copy from qemu-user-static (rhbz#2061584)
- Remove qemu-common dep from qemu-user-static (rhbz#2061584)

* Fri Apr 08 2022 Eduardo Lima (Etrunko) <etrunko@redhat.com> - 7.0.0-1
- Rebase to qemu 7.0.0-1

* Wed Apr 06 2022 Richard W.M. Jones <rjones@redhat.com> - 2:6.2.0-8
- acpi: fix QEMU crash when started with SLIC table (RHBZ#2072303)

* Fri Apr 01 2022 Neal Gompa <ngompa@fedoraproject.org> - 2:6.2.0-7
- Backport virtiofsd changes to fix crashes on F36+
  Resolves: rhbz#2070066

* Fri Apr 01 2022 Richard W.M. Jones <rjones@redhat.com> - 2:6.2.0-6
- Bump and rebuild for SONAME change in libmpathpersist (RHBZ#2069778)

* Thu Feb 10 2022 Cole Robinson <crobinso@redhat.com> - 6.2.0-5
- Split out qemu-virtiofsd subpackage

* Wed Feb 09 2022 Eduardo Lima (Etrunko) <etrunko@redhat.com> - 2:6.2.0-4
- virtiofsd: Drop membership of all supplementary groups (CVE-2022-0358)
  Resolves: rhbz#2044863

* Wed Feb 2 2022 Paolo Bonzini <pbonzini@redhat.com> - 2:6.2.0-3
- Fix non-SGX builds

* Fri Jan 21 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2:6.2.0-2.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild

* Tue Jan 11 2022 Richard W.M. Jones <rjones@redhat.com> - 2:6.2.0-2
- Bump release and rebuild for new xen

* Wed Dec 15 2021 Eduardo Lima (Etrunko) <etrunko@redhat.com> - 6.2.0-1
- Rebase to qemu 6.2.0

* Thu Dec 09 2021 Eduardo Lima (Etrunko) <etrunko@redhat.com> - 6.2.0-0.1-rc4
- Rebase to qemu 6.2.0-rc4

* Fri Dec 03 2021 Eduardo Lima (Etrunko) <etrunko@redhat.com> - 6.2.0-0.1-rc3
- Rebase to qemu 6.2.0-rc3

* Thu Nov 25 2021 Daniel P. Berrangé <berrange@redhat.com> - 6.1.0-13
- Fix iovec limits with scsi-generic

* Wed Nov 24 2021 Richard W.M. Jones <rjones@redhat.com> - 6.1.0-12
- Add support for qemu-nbd --selinux-relabel option (RHBZ#1984938)
- Define STAP_SDT_ARG_CONSTRAINT=g on %%{arm}, workaround for:
  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103395

* Mon Nov 08 2021 Adam Williamson <awilliam@redhat.com> - 6.1.0-10
- Fix snapshot creation with qxl graphics

* Fri Oct 08 2021 Cole Robinson <crobinso@redhat.com> - 6.1.0-9
- Fix tcg PVH test with binutils 2.36+

* Wed Oct 06 2021 Cole Robinson <crobinso@redhat.com> - 6.1.0-8
- Fix qemu crash with vnc + libvirt virDomainOpenConsole

* Sun Sep 12 2021 Richard W.M. Jones <rjones@redhat.com> - 6.1.0-7
- Alternate fix for assertion on armv7hl (RHBZ#1999878)

* Wed Sep 01 2021 Richard W.M. Jones <rjones@redhat.com> - 6.1.0-6
- Fix assertion on armv7hl (RHBZ#1999878)

* Tue Aug 31 2021 Richard W.M. Jones <rjones@redhat.com> - 6.1.0-5
- Fix -cpu max (RHBZ#1999700)

* Fri Aug 27 2021 Richard W.M. Jones <rjones@redhat.com> - 6.1.0-4
- Disable gcrypt (for real this time).

* Fri Aug 27 2021 Richard W.M. Jones <rjones@redhat.com> - 6.1.0-3
- Revert "Disable gcrypt" which seems to disable gnutls (RHBZ#1998452)

* Thu Aug 26 2021 Richard W.M. Jones <rjones@redhat.com> - 6.1.0-2
- Fix dependency pci_gl -> pci-gl and vga_gl -> vga-gl (RHBZ#1997855)

* Tue Aug 24 2021 Eduardo Lima (Etrunko) <etrunko@redhat.com> - 6.1.0-1
- Rebase to qemu 6.1.0

* Tue Aug 10 2021 Eduardo Lima (Etrunko) <etrunko@redhat.com> - 6.1.0-0.3-rc4
- Rebase to qemu 6.1.0-rc4

* Tue Aug 10 2021 Eduardo Lima (Etrunko) <etrunko@redhat.com> - 6.1.0-0.2-rc3
- Rebase to qemu 6.1.0-rc3

* Mon Aug 9 2021 Eduardo Lima (Etrunko) <etrunko@redhat.com> - 6.1.0-0.1-rc2
- Rebase to qemu 6.1.0-rc2

* Thu Jul 29 2021 Cole Robinson <crobinso@redhat.com> - 6.0.0-12
- Drop python3 shebang fixup for tests rpm
- Parallelize make check
- Explicitly disable c++ build

* Fri Jul 23 2021 Richard W.M. Jones <rjones@redhat.com> - 6.0.0-11
- Fix dependencies of qemu metapackage.

* Fri Jul 23 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2:6.0.0-10.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild

* Sun Jul 18 2021 Cole Robinson <crobinso@redhat.com> - 6.0.0-10
- Split out qemu-pr-helper and qemu-tools subpackages

* Wed Jul 07 2021 Cole Robinson <crobinso@redhat.com> - 6.0.0-9
- Use standard fedora build macros
- Access roms directly in ipxe, seabios, seavgabios directories

* Wed Jun 30 2021 Cole Robinson <crobinso@redhat.com> - 6.0.0-8
- Relax meson version to fix building on older Fedora
- More attempts to get CI working

* Wed Jun 23 2021 Cole Robinson <crobinso@redhat.com> - 6.0.0-7
- Add qemu-tests package
- Move qemu-sanity-check test to fedora CI
- Add s390x and generic kvm modprobe file from RHEL
- Add vhost modprobe file from RHEL
- Distribute tracetool, simpletrace, dump-guest-memory tools

* Wed Jun 16 2021 Cole Robinson <crobinso@redhat.com> - 6.0.0-6
- Build against fuse3 and SDL2_image
- Move qemu-storage-daemon to qemu-img subpackage

* Mon Jun 07 2021 Cole Robinson <crobinso@redhat.com> - 6.0.0-5
- Rebuild for xen 4.15

* Tue Jun 01 2021 Cole Robinson <crobinso@redhat.com> - 2:6.0.0-4
- Split out qemu-device-display-vhost-user-gpu subpackage
- Split out qemu-docs subpackage

* Wed May 19 2021 Paolo Bonzini <pbonzini@redhat.com> - 2:6.0.0-3
- add another patch to fix configuration files

* Wed May 19 2021 Paolo Bonzini <pbonzini@redhat.com> - 2:6.0.0-2
- fix spice option from configuration file
- fix object option from configuration file
- allow not specifying size in -m when using -M memory-backend

* Wed May 12 2021 Cole Robinson <crobinso@redhat.com> - 2:6.0.0-1
- Rebase to qemu 6.0.0 GA

* Wed Apr 21 2021 Cole Robinson <crobinso@redhat.com> - 2:6.0.0-0.3.rc4
- Rebase to qemu 6.0.0-rc4

* Wed Apr 14 2021 Richard W.M. Jones <rjones@redhat.com> - 2:6.0.0-0.2.rc2
- Rebuild for updated liburing.

* Tue Apr 06 2021 Cole Robinson <aintdiscole@gmail.com> - 6.0.0-0.1.rc2
- Rebase to qemu 6.0.0-rc2

* Tue Mar 02 2021 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 2:5.2.0-6.1
- Rebuilt for updated systemd-rpm-macros
  See https://pagure.io/fesco/issue/2583.

* Mon Mar 01 2021 Cole Robinson <aintdiscole@gmail.com> - 5.2.0-6
- Fix building on centos stream in copr

* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2:5.2.0-5.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild

* Mon Jan 11 2021 Paolo Bonzini <pbonzini@redhat.com> - 2:5.2.0-5
- Use symlink for qemu-kvm.
- Fix make check on bash 5.1.

* Fri Dec 11 2020 Richard W.M. Jones <rjones@redhat.com> - 2:5.2.0-4
- qemu-char-spice not qemu-chardev-spice.

* Thu Dec 10 2020 Mohan Boddu <mboddu@bhujji.com> - 5.2.0-2
- Fixing the ISA Dependencies

* Wed Dec 09 2020 Cole Robinson <aintdiscole@gmail.com> - 5.2.0-1
- Rebase to qemu-5.2.0 GA
- Fix spice and GL UI module deps (bz 1904603)

* Thu Dec 03 2020 Richard W.M. Jones <rjones@redhat.com> - 5.2.0-0.9.rc4
- Enable qemu-kvm-core package on riscv64.

* Thu Dec 03 2020 Cole Robinson <aintdiscole@gmail.com> - 5.2.0-0.8.rc4
- Rebase to qemu-5.2.0-rc4

* Tue Nov 24 2020 Cole Robinson <aintdiscole@gmail.com> - 5.2.0-0.7.rc2
- Fix running 9p tests in copr

* Thu Nov 19 2020 Paolo Bonzini <pbonzini@redhat.com> - 5.2.0-0.6.rc2
- Remove --python=... to force use of system meson

* Thu Nov 19 2020 Daniel P. Berrangé <berrange@redhat.com> - 5.2.0-0.5.rc2
- Re-enable systemtap tracing

* Wed Nov 18 2020 Cole Robinson <aintdiscole@gmail.com> - 5.2.0-0.4.rc2
- Rebase to qemu-5.2.0-rc2

* Fri Nov 13 2020 Daniel P. Berrangé <berrange@redhat.com> - 5.2.0-0.3.rc1
- Disable user mode static builds in ELN

* Wed Nov 11 2020 Cole Robinson <aintdiscole@gmail.com> - 5.2.0-0.2.rc1
- Rebase to qemu-5.2.0-rc1

* Sun Nov 08 2020 Cole Robinson <aintdiscole@gmail.com> - 5.2.0-0.1.rc0
- Rebase to qemu-5.2.0-rc0

* Thu Nov  5 2020 Daniel P. Berrangé <berrange@redhat.com> - 5.1.0-7
- Disable LTO again. Tests were not passing, we were ignoring failures.

* Mon Oct 26 2020 Daniel P. Berrangé <berrange@redhat.com> - 5.1.0-6
- Re-enable LTO since tests now pass without asserts

* Fri Sep  4 2020 Daniel P. Berrangé <berrange@redhat.com> - 5.1.0-5
- Drop conditions for ppc, ppc64, mips64 and s390 arches
- Fix host qemu binary path for aarch64
- Re-enable kernel BR for QEMU sanity check
- Fix conditionals for enabling QEMU sanity check
- Check whether emulator works before doing sanity check
- Provide explicit kernel path for QEMU sanity check
- Make QEMU sanity check a build blocker

* Thu Sep  3 2020 Daniel P. Berrangé <berrange@redhat.com> - 5.1.0-4
- Add btrfs ioctls to linux-user (rhbz #1872918)

* Tue Aug 18 2020 Tom Stellard <tstellar@redhat.com> - 5.1.0-3
- Add BuildRequires: gcc
- https://fedoraproject.org/wiki/Packaging:C_and_C%2B%2B#BuildRequires_and_Requires

* Mon Aug 17 2020 Cole Robinson <aintdiscole@gmail.com> - 5.1.0-2
- Disable dtrace generation to fix use of modules (bz 1869339)

* Tue Aug 11 2020 Cole Robinson <crobinso@redhat.com> - 5.1.0-1
- Update to version 5.1.0

* Fri Aug 07 2020 Cole Robinson <crobinso@redhat.com> - 5.1.0-0.3.rc3
- Update to version 5.1.0-rc3

* Thu Aug 06 2020 Merlin Mathesius <mmathesi@redhat.com> - 5.1.0-0.2.rc2
- Use new %%{kernel_arches} macro to determine when a full kernel is available

* Wed Aug 05 2020 Cole Robinson <aintdiscole@gmail.com> - 5.1.0-0.2.rc2
- Pull in new modules by default, like we do for others

* Tue Aug 04 2020 Cole Robinson <aintdiscole@gmail.com> - 5.1.0-0.1.rc2
- Update to qemu 5.1.0 rc2

* Fri Jul 31 2020 Daniel P. Berrangé <berrange@redhat.com> - 5.0.0-6
- Remove obsolete Fedora conditionals (PR#9)

* Thu Jul 30 2020 Richard W.M. Jones <rjones@redhat.com> - 5.0.0-5
- Disable LTO as it caused many strange assert failures.

* Wed Jul 29 2020 Richard W.M. Jones <rjones@redhat.com> - 5.0.0-4
- Backport Dan's upstream patch to fix insecure cert in test suite.

* Mon Jul 27 2020 Kevin Fenzi <kevin@scrye.com> - 5.0.0-3
- Rebuild for new xen

* Wed May 13 2020 Cole Robinson <crobinso@redhat.com> - 5.0.0-2
- Fix iouring hang (bz #1823751)

* Wed May 06 2020 Cole Robinson <crobinso@redhat.com> - 5.0.0-1
- Update to version 5.0.0

* Thu Apr 16 2020 Cole Robinson <aintdiscole@gmail.com> - 5.0.0-0.3.rc3
- Update to qemu 5.0.0 rc3

* Thu Apr 09 2020 Cole Robinson <aintdiscole@gmail.com> - 5.0.0-0.3.rc2
- Update to qemu 5.0.0 rc2

* Wed Apr 08 2020 Adam Williamson <awilliam@redhat.com> - 2:5.0.0-0.2.rc0
- Rebuild for new brltty

* Wed Mar 25 2020 Cole Robinson <crobinso@redhat.com> - 2:5.0.0-0.1.rc0
- Update to qemu-5.0.0-rc0

* Tue Mar 17 2020 Fabiano Fidêncio <fidencio@redhat.com> - 2:4.2.0-7
- Fix segfault with SR-IOV hot-{plug,unplug} (bz #1814017)

* Tue Feb 25 2020 Cole Robinson <crobinso@redhat.com> - 2:4.2.0-6
- Rebuild for libiscsi soname bump

* Sat Feb 15 2020 Cole Robinson <crobinso@redhat.com> - 2:4.2.0-5
- Fix ppc shutdown issue (bz #1784961)

* Tue Jan 28 2020 Cole Robinson <crobinso@redhat.com> - 2:4.2.0-4
- virtio-fs support

* Sat Jan 25 2020 Richard W.M. Jones <rjones@redhat.com> - 4.2.0-3
- Add miscellaneous fixes for RISC-V (RHBZ#1794902).