From c6696b1d699fe9539fec93c3658aa8b6ddeba930 Mon Sep 17 00:00:00 2001
From: Honggang Li <honli@redhat.com>
Date: Aug 18 2017 12:10:03 +0000
Subject: Obsoleted by rdma-core


---

diff --git a/.gitignore b/.gitignore
deleted file mode 100644
index 2505e54..0000000
--- a/.gitignore
+++ /dev/null
@@ -1,12 +0,0 @@
-i386/
-i686/
-x86_64/
-ppc/
-ppc64/
-ia64/
-mips/
-arm*/
-noarch/
-.project
-*.src.rpm
-.build*.log
diff --git a/dead.package b/dead.package
new file mode 100644
index 0000000..f0a7220
--- /dev/null
+++ b/dead.package
@@ -0,0 +1 @@
+Obsoleted by rdma-core
diff --git a/rdma.conf b/rdma.conf
deleted file mode 100644
index 4549070..0000000
--- a/rdma.conf
+++ /dev/null
@@ -1,24 +0,0 @@
-# Load IPoIB
-IPOIB_LOAD=yes
-# Load SRP (SCSI Remote Protocol initiator support) module
-SRP_LOAD=yes
-# Load SRPT (SCSI Remote Protocol target support) module
-SRPT_LOAD=yes
-# Load iSER (iSCSI over RDMA initiator support) module
-ISER_LOAD=yes
-# Load iSERT (iSCSI over RDMA target support) module
-ISERT_LOAD=yes
-# Load RDS (Reliable Datagram Service) network protocol
-RDS_LOAD=no
-# Load NFSoRDMA client transport module
-XPRTRDMA_LOAD=yes
-# Load NFSoRDMA server transport module
-SVCRDMA_LOAD=no
-# Should we modify the system mtrr registers?  We may need to do this if you
-# get messages from the ib_ipath driver saying that it couldn't enable
-# write combining for the PIO buffs on the card.
-#
-# Note: recent kernels should do this for us, but in case they don't, we'll
-# leave this option
-FIXUP_MTRR_REGS=no
-
diff --git a/rdma.cxgb3.sys.modprobe b/rdma.cxgb3.sys.modprobe
deleted file mode 100644
index d5925a7..0000000
--- a/rdma.cxgb3.sys.modprobe
+++ /dev/null
@@ -1 +0,0 @@
-install cxgb3 /sbin/modprobe --ignore-install cxgb3 $CMDLINE_OPTS && /sbin/modprobe iw_cxgb3
diff --git a/rdma.cxgb4.sys.modprobe b/rdma.cxgb4.sys.modprobe
deleted file mode 100644
index 44163ab..0000000
--- a/rdma.cxgb4.sys.modprobe
+++ /dev/null
@@ -1 +0,0 @@
-install cxgb4 /sbin/modprobe --ignore-install cxgb4 $CMDLINE_OPTS && /sbin/modprobe iw_cxgb4
diff --git a/rdma.fixup-mtrr.awk b/rdma.fixup-mtrr.awk
deleted file mode 100644
index a57ca76..0000000
--- a/rdma.fixup-mtrr.awk
+++ /dev/null
@@ -1,160 +0,0 @@
-# This is a simple script that checks the contents of /proc/mtrr to see if
-# the BIOS maker for the computer took the easy way out in terms of
-# specifying memory regions when there is a hole below 4GB for PCI access
-# and the machine has 4GB or more of RAM.  When the contents of /proc/mtrr
-# show a 4GB mapping of write-back cached RAM, minus punch out hole(s) of
-# uncacheable regions (the area reserved for PCI access), then it becomes
-# impossible for the ib_ipath driver to set write_combining on its PIO
-# buffers.  To correct the problem, remap the lower memory region in various
-# chunks up to the start of the punch out hole(s), then delete the punch out
-# hole(s) entirely as they aren't needed any more.  That way, ib_ipath will
-# be able to set write_combining on its PIO memory access region.
-
-BEGIN {
-	regs = 0
-}
-
-function check_base(mem)
-{
-	printf "Base memory data: base=0x%08x, size=0x%x\n", base[mem], size[mem] > "/dev/stderr"
-	if (size[mem] < (512 * 1024 * 1024))
-		return 0
-	if (type[mem] != "write-back")
-		return 0
-	if (base[mem] >= (4 * 1024 * 1024 * 1024))
-		return 0
-	return 1
-}
-
-function check_hole(hole)
-{
-	printf "Hole data: base=0x%08x, size=0x%x\n", base[hole], size[hole] > "/dev/stderr"
-	if (size[hole] > (1 * 1024 * 1024 * 1024))
-		return 0
-	if (type[hole] != "uncachable")
-		return 0
-	if ((base[hole] + size[hole]) > (4 * 1024 * 1024 * 1024))
-		return 0
-	return 1
-}
-
-function build_entries(start, end,     new_base, new_size, tmp_base)
-{
-	# mtrr registers require alignment of blocks, so a 256MB chunk must
-	# be 256MB aligned.  Additionally, all blocks must be a power of 2
-	# in size.  So, do the largest power of two size that we can and
-	# still have start + block <= end, rinse and repeat.
-	tmp_base = start
-	do {
-		new_base = tmp_base
-		new_size = 4096
-		while (((new_base + new_size) < end) &&
-		       ((new_base % new_size) == 0))
-			new_size = lshift(new_size, 1)
-		if (((new_base + new_size) > end) ||
-		    ((new_base % new_size) != 0))
-			new_size = rshift(new_size, 1)
-		printf "base=0x%x size=0x%x type=%s\n",
-			new_base, new_size, type[mem] > "/dev/stderr"
-		printf "base=0x%x size=0x%x type=%s\n",
-			new_base, new_size, type[mem] > "/proc/mtrr"
-		fflush("")
-		tmp_base = new_base + new_size
-	} while (tmp_base < end)
-}
-
-{
-	gsub("^reg", "")
-	gsub(": base=", " ")
-	gsub(" [(].*), size=", " ")
-	gsub(": ", " ")
-	gsub(", count=.*$", "")
-	register[regs] = strtonum($1)
-	base[regs] = strtonum($2)
-	size[regs] = strtonum($3)
-	human_size[regs] = size[regs]
-	if (match($3, "MB")) { size[regs] *= 1024*1024; mult[regs] = "MB" }
-	else { size[regs] *= 1024; mult[regs] = "KB" }
-	type[regs] = $4
-	enabled[regs] = 1
-	end[regs] = base[regs] + size[regs]
-	regs++
-}
-
-END {
-	# First we need to find our base memory region.  We only care about
-	# the memory register that starts at base 0.  This is the only one
-	# that we can reliably know is our global memory region, and the
-	# only one that we can reliably check against overlaps.  It's entirely
-	# possible that any memory region not starting at 0 and having an
-	# overlap with another memory region is in fact intentional and we
-	# shouldn't touch it.
-	for(i=0; i<regs; i++)
-		if (base[i] == 0)
-			break
-	# Did we get a valid base register?
-	if (i == regs)
-		exit 1
-	mem = i
-	if (!check_base(mem))
-		exit 1
-
-	cur_hole = 0
-	for(i=0; i<regs; i++) {
-		if (i == mem)
-			continue
-		if (base[i] < end[mem] && check_hole(i))
-			holes[cur_hole++] = i
-	}
-	if (cur_hole == 0) {
-		print "Nothing to do" > "/dev/stderr"
-		exit 1
-	}
-	printf "Found %d punch-out holes\n", cur_hole > "/dev/stderr"
-
-	# We need to sort the holes according to base address
-	for(j = 0; j < cur_hole - 1; j++) {
-		for(i = cur_hole - 1; i > j; i--) {
-			if(base[holes[i]] < base[holes[i-1]]) {
-				tmp = holes[i]
-				holes[i] = holes[i-1]
-				holes[i-1] = tmp
-			}
-		}
-	}
-	# OK, the common case would be that the BIOS is mapping holes out
-	# of the 4GB memory range, and that our hole(s) are consecutive and
-	# that our holes and our memory region end at the same place.  However,
-	# things like machines with 8GB of RAM or more can foul up these
-	# common traits.
-	#
-	# So, our modus operandi is to disable all of the memory/hole regions
-	# to start, then build new base memory zones that in the end add
-	# up to the same as our original zone minus the holes.  We know that
-	# we will never have a hole listed here that belongs to a valid
-	# hole punched in a write-combining memory region because you can't
-	# overlay write-combining on top of write-back and we know our base
-	# memory region is write-back, so in order for this hole to overlap
-	# our base memory region it can't be also overlapping a write-combining
-	# region.
-	printf "disable=%d\n", register[mem] > "/dev/stderr"
-	printf "disable=%d\n", register[mem] > "/proc/mtrr"
-	fflush("")
-	enabled[mem] = 0
-	for(i=0; i < cur_hole; i++) {
-		printf "disable=%d\n", register[holes[i]] > "/dev/stderr"
-		printf "disable=%d\n", register[holes[i]] > "/proc/mtrr"
-		fflush("")
-		enabled[holes[i]] = 0
-	}
-	build_entries(base[mem], base[holes[0]])
-	for(i=0; i < cur_hole - 1; i++)
-		if (base[holes[i+1]] > end[holes[i]])
-			build_entries(end[holes[i]], base[holes[i+1]])
-	if (end[mem] > end[holes[i]])
-		build_entries(end[holes[i]], end[mem])
-	# We changed up the mtrr regs, so signal to the rdma script to
-	# reload modules that need the mtrr regs to be right.
-	exit 0
-}
-
diff --git a/rdma.ifdown-ib b/rdma.ifdown-ib
deleted file mode 100644
index b289ea0..0000000
--- a/rdma.ifdown-ib
+++ /dev/null
@@ -1,183 +0,0 @@
-#!/bin/bash
-# Network Interface Configuration System
-# Copyright (c) 1996-2013 Red Hat, Inc. all rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License, version 2,
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-[ -f ../network ] && . ../network
-
-CONFIG=${1}
-
-source_config
-
-# Allow the user to override the detection of our physical device by passing
-# it in.  No checking is done, if the user gives us a bogus dev, it's
-# their problem.
-[ -n "${PHYSDEV}" ] && REALDEVICE="$PHYSDEV"
-
-. /etc/sysconfig/network
-
-# Check to make sure the device is actually up
-check_device_down ${DEVICE} && exit 0
-
-# If we are a P_Key device, we need to munge a few things
-if [ "${PKEY}" = yes ]; then
-	[ -z "${PKEY_ID}" ] && {
-	        net_log $"InfiniBand IPoIB device: PKEY=yes requires a PKEY_ID"
-	        exit 1
-	}
-	[ -z "${PHYSDEV}" ] && {
-	        net_log $"InfiniBand IPoIB device: PKEY=yes requires a PHYSDEV"
-	        exit 1
-	} 
-	# Normalize our PKEY_ID to have the high bit set
-	NEW_PKEY_ID=`printf "0x%04x" $(( 0x8000 | ${PKEY_ID} ))`
-	NEW_PKEY_NAME=`printf "%04x" ${NEW_PKEY_ID}`
-	[ "${DEVICE}" != "${PHYSDEV}.${NEW_PKEY_NAME}" ] && {
-                net_log $"Configured DEVICE name does not match what new device name would be.  This
-is most likely because once the PKEY_ID was normalized, it no longer
-resulted in the expected device naming, and so the DEVICE entry in the
-config file needs to be updated to match. This can also be caused by
-giving PKEY_ID as a hex number but without using the mandatory 0x prefix.
-	Configured DEVICE=$DEVICE
-        Configured PHYSDEV=$PHYSDEV
-        Configured PKEY_ID=$PKEY_ID
-        Calculated PKEY_ID=$NEW_PKEY_ID
-        Calculated name=${PHYSDEV}.${NEW_PKEY_NAME}"
-                exit 1
-        }
-        [ -d "/sys/class/net/${DEVICE}" ] || exit 0
-        # When we get to downing the IP address, we need REALDEVICE to
-        # point to our PKEY device
-        REALDEVICE="${DEVICE}"
-fi
-
-
-if [ "${SLAVE}" != "yes" -o -z "${MASTER}" ]; then
-if [ -n "${HWADDR}" -a -z "${MACADDR}" ]; then
-    HWADDR=$(echo $HWADDR | tail -c 24)
-    FOUNDMACADDR=$(get_hwaddr ${REALDEVICE} | tail -c 24)
-    if [ -n "${FOUNDMACADDR}" -a "${FOUNDMACADDR}" != "${HWADDR}" ]; then
-        NEWCONFIG=$(get_config_by_hwaddr ${FOUNDMACADDR})
-	if [ -n "${NEWCONFIG}" ]; then
-	   eval $(LANG=C grep -F "DEVICE=" $NEWCONFIG)
-	else
-	   net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring."
-	   exit 1
-	fi
-	if [ -n "${NEWCONFIG}" -a "${NEWCONFIG##*/}" != "${CONFIG##*/}" -a "${DEVICE}" = "${REALDEVICE}" ]; then
-	   exec /sbin/ifdown ${NEWCONFIG}
-	else
-	   net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring."
-	   exit 1
-	fi
-    fi
-fi
-fi
-
-if is_bonding_device ${DEVICE} ; then
-    for device in $(LANG=C grep -l "^[[:space:]]*MASTER=\"\?${DEVICE}\"\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do
-	is_ignored_file "$device" && continue
-	/sbin/ifdown ${device##*/}
-    done
-    for arg in $BONDING_OPTS ; do
-	key=${arg%%=*};
-	[[ "${key}" != "arp_ip_target" ]] && continue
-	value=${arg##*=};
-	if [ "${value:0:1}" != "" ]; then
-            OLDIFS=$IFS;
-            IFS=',';
-            for arp_ip in $value; do
-		if grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/arp_ip_target; then
-                    echo "-$arp_ip" > /sys/class/net/${DEVICE}/bonding/arp_ip_target
-		fi
-            done
-            IFS=$OLDIFS;
-	else
-	    value=${value#+};
-	    if grep -q $value /sys/class/net/${DEVICE}/bonding/arp_ip_target; then
-                echo "-$value" > /sys/class/net/${DEVICE}/bonding/arp_ip_target
-	    fi
-	fi
-    done
-fi
-
-/etc/sysconfig/network-scripts/ifdown-ipv6 ${CONFIG}
-
-retcode=0
-[ -n "$(pidof -x dhclient)" ] && {
-   for VER in "" 6 ; do
-	if [ -f "/var/run/dhclient$VER-${DEVICE}.pid" ]; then
-		dhcpid=$(cat /var/run/dhclient$VER-${DEVICE}.pid)
-		generate_lease_file_name $VER
-		if [[ "$DHCPRELEASE" = [yY1]* ]];  then
-			/sbin/dhclient -r -lf ${LEASEFILE} -pf /var/run/dhclient$VER-${DEVICE}.pid ${DEVICE} >/dev/null 2>&1
-			retcode=$?
-		else
-			kill $dhcpid >/dev/null 2>&1
-			retcode=$?
-			reason=STOP$VER interface=${DEVICE} /sbin/dhclient-script
-		fi
-		if [ -f "/var/run/dhclient$VER-${DEVICE}.pid" ]; then
-			rm -f /var/run/dhclient$VER-${DEVICE}.pid
-			kill $dhcpid >/dev/null 2>&1
-		fi	
-	fi
-    done
-}	
-# we can't just delete the configured address because that address
-# may have been changed in the config file since the device was
-# brought up.  Flush all addresses associated with this
-# instance instead.
-if [ -d "/sys/class/net/${REALDEVICE}" ]; then
-	if [ "${REALDEVICE}" = "${DEVICE}" ]; then
-		ip addr flush dev ${REALDEVICE} scope global 2>/dev/null
-	else
-		ip addr flush dev ${REALDEVICE} label ${DEVICE} scope global 2>/dev/null
-	fi
-	
-	if [ "${SLAVE}" = "yes" -a -n "${MASTER}" ]; then
-		echo "-${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null
-	fi
-
-	if [ "${REALDEVICE}" = "${DEVICE}" ]; then
-  		ip link set dev ${DEVICE} down 2>/dev/null
-	fi
-fi
-[ "$retcode" = "0" ] && retcode=$?
-
-# wait up to 5 seconds for device to actually come down...
-waited=0
-while ! check_device_down ${DEVICE} && [ "$waited" -lt 50 ] ; do
-    usleep 10000
-    waited=$(($waited+1))
-done
-
-if [ "$retcode" = 0 ] ; then
-    /etc/sysconfig/network-scripts/ifdown-post $CONFIG
-    # do NOT use $? because ifdown should return whether or not
-    # the interface went down.
-fi
-
-if [ -n "$PKEY" ]; then
-    # PKey PKEY
-    echo "$NEW_PKEY_ID" > /sys/class/net/${PHYSDEV}/delete_child
-fi
-
-exit $retcode
diff --git a/rdma.ifup-ib b/rdma.ifup-ib
deleted file mode 100644
index 9efea51..0000000
--- a/rdma.ifup-ib
+++ /dev/null
@@ -1,308 +0,0 @@
-#!/bin/bash
-# Network Interface Configuration System
-# Copyright (c) 1996-2013 Red Hat, Inc. all rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License, version 2,
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-[ -f ../network ] && . ../network
-
-CONFIG="${1}"
-
-need_config "${CONFIG}"
-
-source_config
-
-# Allow the user to override the detection of our physical device by passing
-# it in.  No checking is done, if the user gives us a bogus dev, it's
-# their problem.
-[ -n "${PHYSDEV}" ] && REALDEVICE="$PHYSDEV"
-
-if [ "${BOOTPROTO}" = "dhcp" ]; then
-    DYNCONFIG=true
-fi
-
-# load the module associated with that device
-# /sbin/modprobe ${REALDEVICE}
-is_available_wait ${REALDEVICE} ${DEVTIMEOUT}
-
-# bail out, if the MAC does not fit
-if [ -n "${HWADDR}" ]; then
-	FOUNDMACADDR=$(get_hwaddr ${REALDEVICE} | tail -c 24)
-	HWADDR=$(echo $HWADDR | tail -c 24)
-	if [ "${FOUNDMACADDR}" != "${HWADDR}" ]; then
-		net_log $"Device ${DEVICE} has different MAC address than expected, ignoring."
-		exit 1
-	fi
-fi
-
-# now check the real state
-is_available ${REALDEVICE} || {
-      if [ -n "$alias" ]; then
-         net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization."
-      else
-         net_log $"Device ${DEVICE} does not seem to be present, delaying initialization."
-      fi
-      exit 1
-}
-
-# if we are a P_Key device, create the device if needed
-if [ "${PKEY}" = yes ]; then
-	[ -z "${PKEY_ID}" ] && {
-		net_log $"InfiniBand IPoIB device: PKEY=yes requires a PKEY_ID"
-		exit 1
-	}
-	[ -z "${PHYSDEV}" ] && {
-		net_log $"InfiniBand IPoIB device: PKEY=yes requires a PHYSDEV"
-		exit 1
-	}
-	# Normalize our PKEY_ID to have the high bit set
-	NEW_PKEY_ID=`printf "0x%04x" $(( 0x8000 | ${PKEY_ID} ))`
-	NEW_PKEY_NAME=`printf "%04x" ${NEW_PKEY_ID}`
-	[ "${DEVICE}" != "${PHYSDEV}.${NEW_PKEY_NAME}" ] && {
-		net_log $"Configured DEVICE name does not match what new device name would be.  This
-is most likely because once the PKEY_ID was normalized, it no longer
-resulted in the expected device naming, and so the DEVICE entry in the
-config file needs to be updated to match. This can also be caused by
-giving PKEY_ID as a hex number but without using the mandatory 0x prefix.
-	Configured DEVICE=$DEVICE
-	Configured PHYSDEV=$PHYSDEV
-	Configured PKEY_ID=$PKEY_ID
-	Calculated PKEY_ID=$NEW_PKEY_ID
-	Calculated name=${PHYSDEV}.${NEW_PKEY_NAME}"
-		exit 1
-	}
-	[ -d "/sys/class/net/${DEVICE}" ] ||
-		echo "${NEW_PKEY_ID}" > "/sys/class/net/${PHYSDEV}/create_child"
-	[ -d "/sys/class/net/${DEVICE}" ] || {
-		echo "Failed to create child device $NEW_PKEY_ID of $PHYSDEV"
-		exit 1
-	}
-	# When we get to setting up the IP address, we need REALDEVICE to
-	# point to our new PKEY device
-	REALDEVICE="${DEVICE}"
-fi
-
-
-if [ -n "${MACADDR}" ]; then
-    net_log $"IPoIB devices do not support setting the MAC address of the interface"
-    # ip link set dev ${DEVICE} address ${MACADDR}
-fi
-
-# First, do we even support setting connected mode?
-if [ -e /sys/class/net/${DEVICE}/mode ]; then
-    # OK, set the mode in all cases, that way it gets reset on a down/up
-    # cycle, allowing people to change the mode without rebooting
-    if [ "${CONNECTED_MODE}" = yes ]; then
-        echo connected > /sys/class/net/${DEVICE}/mode
-	# cap the MTU where we should based upon mode
-	[ -z "$MTU" ] && MTU=65520
-	[ "$MTU" -gt 65520 ] && MTU=65520
-    else
-        echo datagram > /sys/class/net/${DEVICE}/mode
-	# cap the MTU where we should based upon mode
-	[ -z "$MTU" ] && MTU=2044
-	[ "$MTU" -gt 2044 ] && MTU=2044
-    fi
-fi
-
-if [ -n "${MTU}" ]; then
-    ip link set dev ${DEVICE} mtu ${MTU}
-fi
-
-# slave device?
-if [ "${SLAVE}" = yes -a "${ISALIAS}" = no -a "${MASTER}" != "" ]; then
-    install_bonding_driver ${MASTER}
-    grep -wq "${DEVICE}" /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null || {
-	/sbin/ip link set dev ${DEVICE} down
-	echo "+${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null
-    }
-    ethtool_set
-
-    exit 0
-fi
-
-# Bonding initialization. For DHCP, we need to enslave the devices early,
-# so it can actually get an IP.
-if [ "$ISALIAS" = no ] && is_bonding_device ${DEVICE} ; then
-    install_bonding_driver ${DEVICE}
-    /sbin/ip link set dev ${DEVICE} up
-    for device in $(LANG=C grep -l "^[[:space:]]*MASTER=\"\?${DEVICE}\"\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do
-	    is_ignored_file "$device" && continue
-	    /sbin/ifup ${device##*/}
-    done
-
-    [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
-
-    # add the bits to setup the needed post enslavement parameters
-    for arg in $BONDING_OPTS ; do   
-        key=${arg%%=*};
-        value=${arg##*=};
-	if [ "${key}" = "primary" ]; then 
-            echo $value > /sys/class/net/${DEVICE}/bonding/$key
-	fi
-    done
-fi
-
-		     
-if [ -n "${DYNCONFIG}" ] && [ -x /sbin/dhclient ]; then
-    if [[ "${PERSISTENT_DHCLIENT}" =  [yY1]* ]]; then
-       ONESHOT="";
-    else
-       ONESHOT="-1";
-    fi;
-    generate_config_file_name
-    generate_lease_file_name
-    DHCLIENTARGS="${DHCLIENTARGS} -H ${DHCP_HOSTNAME:-${HOSTNAME%%.*}} ${ONESHOT} -q ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /var/run/dhclient-${DEVICE}.pid"
-    echo
-    echo -n $"Determining IP information for ${DEVICE}..."
-    if [[ "${PERSISTENT_DHCLIENT}" !=  [yY1]* ]] && check_link_down ${DEVICE}; then
-	echo $" failed; no link present.  Check cable?"
-	exit 1
-    fi
-
-    ethtool_set
-
-    if /sbin/dhclient ${DHCLIENTARGS} ${DEVICE} ; then
-	echo $" done."
-	dhcpipv4="good"
-    else
-	echo $" failed."
-	if [[ "${IPV4_FAILURE_FATAL}"  = [Yy1]* ]] ; then
-	    exit 1
-	fi
-	if [[ "$IPV6INIT" != [yY1]* && "$DHCPV6C" != [yY1]* ]] ; then
-	    exit 1
-	fi
-	net_log "Unable to obtain IPv4 DHCP address ${DEVICE}." warning
-    fi
-# end dynamic device configuration
-else 
-    if [ -z "${IPADDR}" -a -z "${IPADDR0}" -a -z "${IPADDR1}" -a -z "${IPADDR2}" ]; then
-         # enable device without IP, useful for e.g. PPPoE
-	 ip link set dev ${REALDEVICE} up
-	 ethtool_set
-	 [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
-    else
-  
-    expand_config
-
-    [ -n "${ARP}" ] && \
-	ip link set dev ${REALDEVICE} $(toggle_value arp $ARP)
-   
-    if ! ip link set dev ${REALDEVICE} up ; then
-	net_log $"Failed to bring up ${DEVICE}."
-	exit 1
-    fi
-
-    ethtool_set
-
-    [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
-
-    if [ "${DEVICE}" = "lo" ]; then
-    	SCOPE="scope host"
-    else
-        SCOPE=${SCOPE:-}
-    fi
-    
-    if [ -n "$SRCADDR" ]; then
-       SRC="src $SRCADDR"
-    else
-       SRC=
-    fi
-    
-    # set IP address(es)
-    for idx in {0..256} ; do
-	if [ -z "${ipaddr[$idx]}" ]; then
-	    break
-	fi
-
-	if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${ipaddr[$idx]}/${prefix[$idx]}" ; then
-	    [ "${REALDEVICE}" != "lo" ] && [ "${arpcheck[$idx]}" != "no" ] && \
-	    /sbin/arping -q -c 2 -w 3 -D -I ${REALDEVICE} ${ipaddr[$idx]}
-	    if [ $? = 1 ]; then
-		net_log $"Error, some other host already uses address ${ipaddr[$idx]}."
-		exit 1
-	    fi
-	   
-	    if ! ip addr add ${ipaddr[$idx]}/${prefix[$idx]} \
-		brd ${broadcast[$idx]:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then
-		net_log $"Error adding address ${ipaddr[$idx]} for ${DEVICE}."
-	    fi
-	fi 
-    
-	if [ -n "$SRCADDR" ]; then
-           sysctl -w "net.ipv4.conf.${REALDEVICE}.arp_filter=1" >/dev/null 2>&1
-	fi
-
-	# update ARP cache of neighboring computers
-	if [ "${REALDEVICE}" != "lo" ]; then
-	    /sbin/arping -q -A -c 1 -I ${REALDEVICE} ${ipaddr[$idx]}
-	    ( sleep 2;
-	      /sbin/arping -q -U -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} ) > /dev/null 2>&1 < /dev/null &
-	fi
-    done
-
-    # Set a default route.
-    if [ "${DEFROUTE}" != "no" ] && [ -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${REALDEVICE}" ]; then
-	# set up default gateway. replace if one already exists
-	if [ -n "${GATEWAY}" ] && [ "$(ipcalc --network ${GATEWAY} ${netmask[0]} 2>/dev/null)" = "NETWORK=${NETWORK}" ]; then
-	    ip route replace default ${METRIC:+metric $METRIC} \
-		via ${GATEWAY} ${WINDOW:+window $WINDOW} ${SRC} \
-		${GATEWAYDEV:+dev $GATEWAYDEV} ||
-			net_log $"Error adding default gateway ${GATEWAY} for ${DEVICE}."
-	elif [ "${GATEWAYDEV}" = "${DEVICE}" ]; then
-	    ip route replace default ${METRIC:+metric $METRIC} \
-		${SRC} ${WINDOW:+window $WINDOW} dev ${REALDEVICE} ||
-			net_log $"Erorr adding default gateway for ${REALDEVICE}."
-	fi
-    fi
-    fi
-fi
-
-# Add Zeroconf route.
-if [ -z "${NOZEROCONF}" -a "${ISALIAS}" = "no" -a "${REALDEVICE}" != "lo" ]; then
-    ip route add 169.254.0.0/16 dev ${REALDEVICE} metric $((1000 + $(cat /sys/class/net/${REALDEVICE}/ifindex))) scope link
-fi
-
-# Inform firewall which network zone (empty means default) this interface belongs to
-if [ -x /usr/bin/firewall-cmd -a "${REALDEVICE}" != "lo" ]; then
-    /usr/bin/firewall-cmd --zone="${ZONE}" --change-interface="${DEVICE}" > /dev/null 2>&1
-fi
-
-# IPv6 initialisation?
-/etc/sysconfig/network-scripts/ifup-ipv6 ${CONFIG}
-if [[ "${DHCPV6C}"  = [Yy1]* ]] && [ -x /sbin/dhclient ]; then
-    generate_config_file_name 6
-    generate_lease_file_name 6
-    echo
-    echo -n $"Determining IPv6 information for ${DEVICE}..."
-    if /sbin/dhclient -6 -1 ${DHCPV6C_OPTIONS} ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /var/run/dhclient6-${DEVICE}.pid -H ${DHCP_HOSTNAME:-${HOSTNAME%%.*}} ${DEVICE} ; then
-        echo $" done."
-    else
-        echo $" failed."
-        if [ "${dhcpipv4}" = "good" -o -n "${IPADDR}" ]; then
-            net_log "Unable to obtain IPv6 DHCP address ${DEVICE}." warning
-        else
-            exit 1
-        fi
-    fi
-fi
-
-exec /etc/sysconfig/network-scripts/ifup-post ${CONFIG} ${2}
-
diff --git a/rdma.kernel-init b/rdma.kernel-init
deleted file mode 100644
index 542a71e..0000000
--- a/rdma.kernel-init
+++ /dev/null
@@ -1,252 +0,0 @@
-#!/bin/bash
-#
-# Bring up the kernel RDMA stack
-#
-# This is usually run automatically by systemd after a hardware activation
-# event in udev has triggered a start of the rdma.service unit
-#
-
-shopt -s nullglob
-
-CONFIG=/etc/rdma/rdma.conf
-MTRR_SCRIPT=/usr/libexec/rdma-fixup-mtrr.awk
-
-LOAD_ULP_MODULES=""
-LOAD_CORE_USER_MODULES="ib_umad ib_uverbs ib_ucm rdma_ucm"
-LOAD_CORE_CM_MODULES="iw_cm ib_cm rdma_cm"
-LOAD_CORE_MODULES="ib_core ib_mad ib_sa ib_addr"
-
-if [ -f $CONFIG ]; then
-    . $CONFIG
-
-    if [ "${RDS_LOAD}" == "yes" ]; then
-        IPOIB_LOAD=yes
-    fi
-
-    if [ "${IPOIB_LOAD}" == "yes" ]; then
-	LOAD_ULP_MODULES="ib_ipoib"
-    fi
-
-    if [ "${RDS_LOAD}" == "yes" -a -f /lib/modules/`uname -r`/kernel/net/rds/rds.ko ]; then
-	LOAD_ULP_MODULES="$LOAD_ULP_MODULES rds"
-	if [ -f /lib/modules/`uname -r`/kernel/net/rds/rds_tcp.ko ]; then
-	    LOAD_ULP_MODULES="$LOAD_ULP_MODULES rds_tcp"
-	fi
-	if [ -f /lib/modules/`uname -r`/kernel/net/rds/rds_rdma.ko ]; then
-	    LOAD_ULP_MODULES="$LOAD_ULP_MODULES rds_rdma"
-	fi
-    fi
-
-    if [ "${SRP_LOAD}" == "yes" ]; then
-	LOAD_ULP_MODULES="$LOAD_ULP_MODULES ib_srp"
-    fi
-
-    if [ "${SRPT_LOAD}" == "yes" ]; then
-	LOAD_ULP_MODULES="$LOAD_ULP_MODULES ib_srpt"
-    fi
-
-    if [ "${ISER_LOAD}" == "yes" ]; then
-	LOAD_ULP_MODULES="$LOAD_ULP_MODULES ib_iser"
-    fi
-
-    if [ "${ISERT_LOAD}" == "yes" ]; then
-	LOAD_ULP_MODULES="$LOAD_ULP_MODULES ib_isert"
-    fi
-
-    if [ "${XPRTRDMA_LOAD}" == "yes" ]; then
-	LOAD_ULP_MODULES="$LOAD_ULP_MODULES xprtrdma"
-    fi
-
-    if [ "${SVCRDMA_LOAD}" == "yes" ]; then
-	LOAD_ULP_MODULES="$LOAD_ULP_MODULES svcrdma"
-    fi
-else
-    LOAD_ULP_MODULES="ib_ipoib"
-fi
-
-# If module $1 is loaded return - 0 else - 1
-is_module()
-{
-    /sbin/lsmod | grep -w "$1" > /dev/null 2>&1
-    return $?
-}
-
-load_modules()
-{
-    local RC=0
-
-    for module in $*; do
-	if ! /sbin/modinfo $module > /dev/null 2>&1; then
-	    # do not attempt to load modules which do not exist
-	    continue
-	fi
-	if ! is_module $module; then
-	    /sbin/modprobe $module
-	    res=$?
-	    RC=$[ $RC + $res ]
-	    if [ $res -ne 0 ]; then
-		echo
-		echo "Failed to load module $module"
-	    fi
-	fi
-    done
-    return $RC
-}
-
-# This function is a horrible hack to work around BIOS authors that should
-# be shot.  Specifically, certain BIOSes will map the entire 4GB address
-# space as write-back cacheable when the machine has 4GB or more of RAM, and
-# then they will exclude the reserved PCI I/O addresses from that 4GB
-# cacheable mapping by making on overlapping uncacheable mapping.  However,
-# once you do that, it is then impossible to set *any* of the PCI I/O
-# address space as write-combining.  This is an absolute death-knell to
-# certain IB hardware.  So, we unroll this mapping here.  Instead of
-# punching a hole in a single 4GB mapping, we redo the base 4GB mapping as
-# a series of discreet mappings that effectively are the same as the 4GB
-# mapping minus the hole, and then we delete the uncacheable mappings that
-# are used to punch the hole.  This then leaves the PCI I/O address space
-# unregistered (which defaults it to uncacheable), but available for
-# write-combining mappings where needed.
-check_mtrr_registers()
-{
-    # If we actually change the mtrr registers, then the awk script will
-    # return true, and we need to unload the ib_ipath module if it's already
-    # loaded.  The udevtrigger in load_hardware_modules will immediately
-    # reload the ib_ipath module for us, so there shouldn't be a problem.
-    [ -f /proc/mtrr -a -f $MTRR_SCRIPT ] &&
-	awk -f $MTRR_SCRIPT /proc/mtrr 2>/dev/null &&
-	if is_module ib_ipath; then
-		/sbin/rmmod ib_ipath
-	fi
-}
-
-load_hardware_modules()
-{
-    local -i RC=0
-
-    [ "$FIXUP_MTRR_REGS" = "yes" ] && check_mtrr_registers
-    # We match both class NETWORK and class INFINIBAND devices since our
-    # iWARP hardware is listed under class NETWORK.  The side effect of
-    # this is that we might cause a non-iWARP network driver to be loaded.
-    udevadm trigger --subsystem-match=pci --attr-nomatch=driver --attr-match=class=0x020000 --attr-match=class=0x0c0600
-    udevadm settle
-    if [ -r /proc/device-tree ]; then
-	if [ -n "`ls /proc/device-tree | grep lhca`" ]; then
-	    if ! is_module ib_ehca; then
-		load_modules ib_ehca
-		RC+=$?
-	    fi
-	fi
-    fi
-    if is_module mlx4_core -a ! is_module mlx4_ib; then
-        load_modules mlx4_ib
-	RC+=$?
-    fi
-    if is_module mlx4_core -a ! is_module mlx4_en; then
-        load_modules mlx4_en
-	RC+=$?
-    fi
-    if is_module mlx5_core -a ! is_module mlx5_ib; then
-	load_modules mlx5_ib
-	RC+=$?
-    fi
-    if is_module mlx5_core -a ! is_module mlx5_en; then
-	load_modules mlx5_en
-	RC+=$?
-    fi
-    if is_module cxgb3 -a ! is_module iw_cxgb3; then
-	load_modules iw_cxgb3
-	RC+=$?
-    fi
-    if is_module cxgb4 -a ! is_module iw_cxgb4; then
-	load_modules iw_cxgb4
-	RC+=$?
-    fi
-    if is_module be2net -a ! is_module ocrdma; then
-	load_modules ocrdma
-	RC+=$?
-    fi
-    return $RC
-}
-
-errata_58()
-{
-    # Check AMD chipset issue Errata #58
-    if test -x /sbin/lspci && test -x /sbin/setpci; then
-	if ( /sbin/lspci -nd 1022:1100 | grep "1100" > /dev/null ) &&
-	   ( /sbin/lspci -nd 1022:7450 | grep "7450" > /dev/null ) &&
-	   ( /sbin/lspci -nd 15b3:5a46 | grep "5a46" > /dev/null ); then
-	    CURVAL=`/sbin/setpci -d 1022:1100 69`
-	    for val in $CURVAL
-	    do
-		if [ "${val}" != "c0" ]; then
-		    /sbin/setpci -d 1022:1100 69=c0
-		    if [ $? -eq 0 ]; then
-			break
-		    else
-			echo "Failed to apply AMD-8131 Errata #58 workaround"
-		    fi
-		fi
-	    done
-	fi
-    fi
-}
-
-errata_56()
-{
-    # Check AMD chipset issue Errata #56
-    if test -x /sbin/lspci && test -x /sbin/setpci; then
-	if ( /sbin/lspci -nd 1022:1100 | grep "1100" > /dev/null ) &&
-	   ( /sbin/lspci -nd 1022:7450 | grep "7450" > /dev/null ) &&
-	   ( /sbin/lspci -nd 15b3:5a46 | grep "5a46" > /dev/null ); then
-	    bus=""
-	    # Look for devices AMD-8131
-	    for dev in `/sbin/setpci -v -f -d 1022:7450 19 | cut -d':' -f1,2`
-	    do
-		bus=`/sbin/setpci -s $dev 19`
-		rev=`/sbin/setpci -s $dev 8`
-		# Look for Tavor attach to secondary bus of this devices
-		for device in `/sbin/setpci -f -s $bus: -d 15b3:5a46 19`
-		do
-		    if [ $rev -lt 13 ]; then
-			/sbin/setpci -d 15b3:5a44 72=14
-			if [ $? -eq 0 ]; then
-			    break
-			else
-			    echo
-			    echo "Failed to apply AMD-8131 Errata #56 workaround"
-			fi
-		    else
-			continue
-		    fi
-		    # If more than one device is on the bus the issue a
-		    # warning
-		    num=`/sbin/setpci -f -s $bus: 0 | wc -l |  sed 's/\ *//g'`
-		    if [ $num -gt 1 ]; then
-			echo "Warning: your current PCI-X configuration might be incorrect."
-			echo "see AMD-8131 Errata 56 for more details."
-		    fi
-		done
-	    done
-	fi
-    fi
-}
-
-
-load_hardware_modules
-RC=$[ $RC + $? ]
-load_modules $LOAD_CORE_MODULES
-RC=$[ $RC + $? ]
-load_modules $LOAD_CORE_CM_MODULES
-RC=$[ $RC + $? ]
-load_modules $LOAD_CORE_USER_MODULES
-RC=$[ $RC + $? ]
-load_modules $LOAD_ULP_MODULES
-RC=$[ $RC + $? ]
-
-errata_58
-errata_56
-
-/usr/libexec/rdma-set-sriov-vf
-
-exit $RC
diff --git a/rdma.mlx4-setup.sh b/rdma.mlx4-setup.sh
deleted file mode 100644
index 609344a..0000000
--- a/rdma.mlx4-setup.sh
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/bash
-dir="/sys/bus/pci/drivers/mlx4_core"
-[ ! -d $dir ] && exit 1
-pushd $dir >/dev/null
-
-function set_dual_port() {
-	device=$1
-	port1=$2
-	port2=$3
-	pushd $device >/dev/null
-	cur_p1=`cat mlx4_port1`
-	cur_p2=`cat mlx4_port2`
-
-	# special case the "eth eth" mode as we need port2 to
-	# actually switch to eth before the driver will let us
-	# switch port1 to eth as well
-	if [ "$port1" == "eth" ]; then
-		if [ "$port2" != "eth" ]; then
-			echo "In order for port1 to be eth, port2 to must also be eth"
-			popd >/dev/null
-			return
-		fi
-		if [ "$cur_p2" != "eth" -a "$cur_p2" != "auto (eth)" ]; then
-			tries=0
-			echo "$port2" > mlx4_port2 2>/dev/null
-			sleep .25
-			cur_p2=`cat mlx4_port2`
-			while [ "$cur_p2" != "eth" -a "$cur_p2" != "auto (eth)" -a $tries -lt 10 ]; do
-				sleep .25
-				let tries++
-				cur_p2=`cat mlx4_port2`
-			done
-			if [ "$cur_p2" != "eth" -a "$cur_p2" != "auto (eth)" ]; then
-				echo "Failed to set port2 to eth mode"
-				popd >/dev/null
-				return
-			fi
-		fi
-		if [ "$cur_p1" != "eth" -a "$cur_p1" != "auto (eth)" ]; then
-			tries=0
-			echo "$port1" > mlx4_port1 2>/dev/null
-			sleep .25
-			cur_p1=`cat mlx4_port1`
-			while [ "$cur_p1" != "eth" -a "$cur_p1" != "auto (eth)" -a $tries -lt 10 ]; do
-				sleep .25
-				let tries++
-				cur_p1=`cat mlx4_port1`
-			done
-			if [ "$cur_p1" != "eth" -a "$cur_p1" != "auto (eth)" ]; then
-				echo "Failed to set port1 to eth mode"
-			fi
-		fi
-		popd >/dev/null
-		return
-	fi
-
-	# our mode is not eth <anything> as that is covered above
-	# so we should be able to succesfully set the ports in
-	# port1 then port2 order
-	if [ "$cur_p1" != "$port1" -o "$cur_p2" != "$port2" ]; then
-		# Try setting the ports in order first
-		echo "$port1" > mlx4_port1 2>/dev/null ; sleep .1
-		echo "$port2" > mlx4_port2 2>/dev/null ; sleep .1
-		cur_p1=`cat mlx4_port1`
-		cur_p2=`cat mlx4_port2`
-	fi
-
-	if [ "$cur_p1" != "$port1" -o "$cur_p2" != "$port2" ]; then
-		# Try reverse order this time
-		echo "$port2" > mlx4_port2 2>/dev/null ; sleep .1
-		echo "$port1" > mlx4_port1 2>/dev/null ; sleep .1
-		cur_p1=`cat mlx4_port1`
-		cur_p2=`cat mlx4_port2`
-	fi
-
-	if [ "$cur_p1" != "$port1" -o "$cur_p2" != "$port2" ]; then
-		echo "Error setting port type on mlx4 device $device"
-	fi
-
-	popd >/dev/null
-	return
-}
-
-		
-while read device port1 port2 ; do
-	[ -d "$device" ] || continue
-	[ -z "$port1" ] && continue
-	[ -f "$device/mlx4_port2" -a -z "$port2" ] && continue
-	[ -f "$device/mlx4_port2" ] && set_dual_port $device $port1 $port2 || echo "$port1" > "$device/mlx4_port1"
-done
-popd 2&>/dev/null
diff --git a/rdma.mlx4.conf b/rdma.mlx4.conf
deleted file mode 100644
index 71207cc..0000000
--- a/rdma.mlx4.conf
+++ /dev/null
@@ -1,27 +0,0 @@
-# Config file for mlx4 hardware port settings
-# This file is read when the mlx4_core module is loaded and used to
-# set the port types for any hardware found.  If a card is not listed
-# in this file, then its port types are left alone.
-#
-# Format:
-# <pci_device_of_card> <port1_type> [port2_type]
-#
-# @port1 and @port2:
-#   One of auto, ib, or eth.  No checking is performed to make sure that
-#   combinations are valid.  Invalid inputs will result in the driver
-#   not setting the port to the type requested.  port1 is required at
-#   all times, port2 is required for dual port cards.
-#
-# Example:
-# 0000:0b:00.0 eth eth
-#
-# You can find the right pci device to use for any given card by loading
-# the mlx4_core module, then going to /sys/bus/pci/drivers/mlx4_core and
-# seeing what possible PCI devices are listed there.  The possible values
-# for ports are: ib, eth, and auto.  However, not all cards support all
-# types, so if you get messages from the kernel that your selected port
-# type isn't supported, there's nothing this script can do about it.  Also,
-# some cards don't support using different types on the two ports (aka,
-# both ports must be either eth or ib).  Again, we can't set what the kernel
-# or hardware won't support.
-#
diff --git a/rdma.mlx4.sys.modprobe b/rdma.mlx4.sys.modprobe
deleted file mode 100644
index 585a873..0000000
--- a/rdma.mlx4.sys.modprobe
+++ /dev/null
@@ -1,5 +0,0 @@
-# WARNING! - This file is overwritten any time the rdma rpm package is
-# updated.  Please do not make any changes to this file.  Instead, make
-# changes to the mlx4.conf file.  It's contents are preserved if they
-# have been changed from the default values.
-install mlx4_core /sbin/modprobe --ignore-install mlx4_core $CMDLINE_OPTS && (if [ -f /usr/libexec/mlx4-setup.sh -a -f /etc/rdma/mlx4.conf ]; then /usr/libexec/mlx4-setup.sh < /etc/rdma/mlx4.conf; fi; if /sbin/modinfo mlx4_en > /dev/null 2>&1; then /sbin/modprobe mlx4_en; fi; if /sbin/modinfo mlx4_ib > /dev/null 2>&1; then /sbin/modprobe mlx4_ib; fi)
diff --git a/rdma.mlx4.user.modprobe b/rdma.mlx4.user.modprobe
deleted file mode 100644
index c8b4cce..0000000
--- a/rdma.mlx4.user.modprobe
+++ /dev/null
@@ -1,21 +0,0 @@
-# This file is intended for users to select the various module options
-# they need for the mlx4 driver.  On upgrade of the rdma package,
-# any user made changes to this file are preserved.  Any changes made
-# to the libmlx4.conf file in this directory are overwritten on
-# pacakge upgrade.
-#
-# Some sample options and what they would do
-# Enable debugging output, device managed flow control, and disable SRIOV
-#options mlx4_core debug_level=1 log_num_mgm_entry_size=-1 probe_vf=0 num_vfs=0
-#
-# Enable debugging output and create SRIOV devices, but don't attach any of
-# the child devices to the host, only the parent device
-#options mlx4_core debug_level=1 probe_vf=0 num_vfs=7
-#
-# Enable debugging output, SRIOV, and attach one of the SRIOV child devices
-# in addition to the parent device to the host
-#options mlx4_core debug_level=1 probe_vf=1 num_vfs=7
-#
-# Enable per priority flow control for send and receive, setting both priority
-# 1 and 2 as no drop priorities
-#options mlx4_en pfctx=3 pfcrx=3
diff --git a/rdma.modules-setup.sh b/rdma.modules-setup.sh
deleted file mode 100644
index 293bfac..0000000
--- a/rdma.modules-setup.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/bash
-
-check() {
-	[ -n "$hostonly" -a -c /sys/class/infiniband_verbs/uverbs0 ] && return 0
-	[ -n "$hostonly" ] && return 255
-	return 0
-}
-
-depends() {
-	return 0
-}
-
-install() {
-	inst /etc/rdma/rdma.conf
-	inst /etc/rdma/mlx4.conf
-	inst /etc/rdma/sriov-vfs
-	inst /usr/libexec/rdma-init-kernel
-	inst /usr/libexec/rdma-fixup-mtrr.awk
-	inst /usr/libexec/mlx4-setup.sh
-	inst /usr/libexec/rdma-set-sriov-vf
-	inst /usr/lib/modprobe.d/libmlx4.conf
-	inst_multiple lspci setpci awk sleep modinfo
-	inst_multiple -o /etc/modprobe.d/mlx4.conf
-	inst_rules 98-rdma.rules 70-persistent-ipoib.rules
-}
-
-installkernel() {
-	hostonly='' instmods =drivers/infiniband =drivers/net/ethernet/mellanox =drivers/net/ethernet/chelsio =drivers/net/ethernet/cisco =drivers/net/ethernet/emulex =drivers/target
-	hostonly='' instmods crc-t10dif crct10dif_common
-}
diff --git a/rdma.service b/rdma.service
deleted file mode 100644
index 514ef58..0000000
--- a/rdma.service
+++ /dev/null
@@ -1,15 +0,0 @@
-[Unit]
-Description=Initialize the iWARP/InfiniBand/RDMA stack in the kernel
-Documentation=file:/etc/rdma/rdma.conf
-RefuseManualStop=true
-DefaultDependencies=false
-Conflicts=emergency.target emergency.service
-Before=network.target remote-fs-pre.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-ExecStart=/usr/libexec/rdma-init-kernel
-
-[Install]
-WantedBy=sysinit.target
diff --git a/rdma.spec b/rdma.spec
deleted file mode 100644
index 6df0d9c..0000000
--- a/rdma.spec
+++ /dev/null
@@ -1,264 +0,0 @@
-#  Copyright (c) 2008 Red Hat, Inc.
-
-#  There is no URL or upstream source entry as this package constitutes
-#  upstream for itself.
-
-%global dracutlibdir %{_usr}/lib/dracut
-%global sysmodprobedir %{_usr}/lib/modprobe.d
-
-Summary: RDMA Kernel Stack Initializer
-Name: rdma
-Version: 2.0
-Release: 25%{?dist}
-License: GPLv2+
-Source0: rdma.conf
-Source1: rdma.udev-ipoib-naming.rules
-Source2: rdma.fixup-mtrr.awk
-Source3: rdma.sriov-vfs
-Source4: rdma.ifup-ib
-Source5: rdma.ifdown-ib
-Source6: rdma.service
-Source7: rdma.kernel-init
-Source8: rdma.udev-rules
-Source9: rdma.modules-setup.sh
-Source10: rdma.cxgb3.sys.modprobe
-Source11: rdma.cxgb4.sys.modprobe
-Source12: rdma.mlx4.conf
-Source13: rdma.mlx4.user.modprobe
-Source14: rdma.mlx4.sys.modprobe
-Source15: rdma.mlx4-setup.sh
-Source16: rdma.sriov-init
-BuildArch: noarch
-%{?systemd_requires}
-BuildRequires: systemd
-Requires: udev >= 095
-Requires: dracut
-Conflicts: libcxgb3 < 1.3.1-10, libcxgb4 < 1.3.6-1, libmlx4 <= 1.0.6-4
-
-%description 
-User space initialization scripts for the kernel InfiniBand/iWARP drivers
-
-%prep
-
-%build
-
-%install
-install -d %{buildroot}%{_sysconfdir}/%{name}
-install -d %{buildroot}%{_sysconfdir}/modprobe.d
-install -d %{buildroot}%{_sysconfdir}/udev/rules.d
-install -d %{buildroot}%{_sysconfdir}/sysconfig/network-scripts
-install -d %{buildroot}%{_libexecdir}
-install -d %{buildroot}%{_unitdir}
-install -d %{buildroot}%{_udevrulesdir}
-install -d %{buildroot}%{dracutlibdir}/modules.d/05rdma
-install -d %{buildroot}%{sysmodprobedir}
-
-# Stuff to go into the base package
-install -m 0644 %{SOURCE0} %{buildroot}%{_sysconfdir}/%{name}/%{name}.conf
-install -m 0644 %{SOURCE12} %{buildroot}%{_sysconfdir}/%{name}/mlx4.conf
-install -m 0644 %{SOURCE3} %{buildroot}%{_sysconfdir}/%{name}/sriov-vfs
-install -m 0644 %{SOURCE1} %{buildroot}%{_sysconfdir}/udev/rules.d/70-persistent-ipoib.rules
-install -m 0644 %{SOURCE13} %{buildroot}%{_sysconfdir}/modprobe.d/mlx4.conf
-install -m 0644 %{SOURCE6} %{buildroot}%{_unitdir}/rdma.service
-install -m 0755 %{SOURCE7} %{buildroot}%{_libexecdir}/rdma-init-kernel
-install -m 0644 %{SOURCE2} %{buildroot}%{_libexecdir}/rdma-fixup-mtrr.awk
-install -m 0755 %{SOURCE16} %{buildroot}%{_libexecdir}/rdma-set-sriov-vf
-install -m 0755 %{SOURCE4} %{buildroot}%{_sysconfdir}/sysconfig/network-scripts/ifup-ib
-install -m 0755 %{SOURCE5} %{buildroot}%{_sysconfdir}/sysconfig/network-scripts/ifdown-ib
-install -m 0644 %{SOURCE8} %{buildroot}%{_udevrulesdir}/98-rdma.rules
-install -m 0755 %{SOURCE9} %{buildroot}%{dracutlibdir}/modules.d/05rdma/module-setup.sh
-install -m 0644 %{SOURCE10} %{buildroot}%{sysmodprobedir}/libcxgb3.conf
-install -m 0644 %{SOURCE11} %{buildroot}%{sysmodprobedir}/libcxgb4.conf
-install -m 0644 %{SOURCE14} %{buildroot}%{sysmodprobedir}/libmlx4.conf
-install -m 0755 %{SOURCE15} %{buildroot}%{_libexecdir}/mlx4-setup.sh
-
-%post
-%systemd_post rdma.service
-
-%preun
-%systemd_preun rdma.service
-
-%postun
-%systemd_postun_with_restart rdma.service
-
-%files
-%dir %{_sysconfdir}/%{name}
-%config(noreplace) %{_sysconfdir}/%{name}/*
-%config(noreplace) %{_sysconfdir}/udev/rules.d/70-persistent-ipoib.rules
-%config(noreplace) %{_sysconfdir}/modprobe.d/mlx4.conf
-%{_sysconfdir}/sysconfig/network-scripts/*
-%{_unitdir}/%{name}.service
-%dir %{dracutlibdir}/modules.d/05rdma
-%{dracutlibdir}/modules.d/05rdma/module-setup.sh
-%{_udevrulesdir}/98-rdma.rules
-%{sysmodprobedir}/libmlx4.conf
-%{sysmodprobedir}/libcxgb3.conf
-%{sysmodprobedir}/libcxgb4.conf
-%{_libexecdir}/rdma-init-kernel
-%{_libexecdir}/rdma-set-sriov-vf
-%{_libexecdir}/rdma-fixup-mtrr.awk
-%{_libexecdir}/mlx4-setup.sh
-
-%changelog
-* Thu Jul 27 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0-25
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
-
-* Sat Feb 11 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0-24
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
-
-* Fri Jun 24 2016 Doug Ledford <dledford@redhat.com> - 2.0-23
-- Don't try to load modules that don't exist as that prevents RDMA subsystem
-  startup (from Yaakov Selkowitz <yselkowi@redhat.com>, Red Hat EL bug 1263936)
-- Fix the hostonly test in the rdma-setup.sh script (Red Hat EL bug 1346113)
-- Update rdma.modules-setup.sh to install all the packages that the EL7.3
-  version of the rdma package does.
-- Update rdma.modules-setup.sh to install all the kernel modules that the
-  EL7.3 version of the rdma package does.
-- Incorporate sriov setup support from EL7.3 package
-- Incorporate numerous other fixes from EL7.3 package
-
-* Fri Apr 29 2016 Doug Ledford <dledford@redhat.com> - 2.0-22
-- $CMDLINE_OPTS must come after the module name
-
-* Thu Apr  7 2016 Honggang Li <honli@redhat.com> - 2.0-21
-- Integrate mlx4 modprobe and conf scripts.
-
-* Fri Apr  1 2016 Honggang Li <honli@redhat.com> - 2.0-20
-- Add the missing libcxgb4 modprobe file
-- Spec file cleanup
-
-* Thu Mar 17 2016 Doug Ledford <dledford@redhat.com> - 2.0-19
-- Fix libcxgb3 conflicts tag to right version
-- Add libcxgb4 modprobe file and conflicts tag
-
-* Thu Mar 17 2016 Doug Ledford <dledford@redhat.com> - 2.0-18
-- Integrate cxgb3 modprobe
-
-* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 2.0-17
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
-
-* Thu Jun 18 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0-16
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
-
-* Tue Jul 22 2014 Doug Ledford <dledford@redhat.com> - 2.0-15
-- Fold in improvements made in the rhel7 tree back to Fedora
-
-* Sun Jun 08 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0-14
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
-
-* Tue Nov 26 2013 Doug Ledford <dledford@redhat.com> - 2.0-13
-- Fix bug in ifdown-ib script handling of P_Key devs
-- Move setting of node_desc to udev rules and make it more reliable
-- Only load RDS if rds kernel module exists as we've disabled it
-  in some places
-
-* Tue Jul 30 2013 Doug Ledford <dledford@redhat.com> - 2.0-12
-- Change VLAN/PKEY in ifup/ifdown scripts.  Overloading VLAN was
-  causing problems
-
-* Thu May 23 2013 Doug Ledford <dledford@redhat.com> - 2.0-11
-- Oops, didn't update ifdown-ib to match latest ifup-ib
-
-* Thu May 23 2013 Doug Ledford <dledford@redhat.com> - 2.0-10
-- More fixups for ifup-ib and P_Key support
-- Move persistent-ipoib.rules to 70 instead of 60 to match prior
-  persistent-net.rules file numbering
-
-* Wed May 22 2013 Doug Ledford <dledford@redhat.com> - 2.0-9
-- Add support for P_Key interfaces (IPoIB version of VLANs)
-- Add sample 60-persistent-ipoib.rules file
-
-* Mon Mar 25 2013 Doug Ledford <dledford@redhat.com> - 2.0-8
-- Drop the sysv package
-- Add the SRPT module to the conf file and startup script
-- Add support for the new ocrdma driver from Emulex
-
-* Thu Feb 14 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0-7
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
-
-* Wed Dec 05 2012 Doug Ledford <dledford@redhat.com> - 2.0-6
-- Add some proper systemd scriptlets
-- Resolves: bz820154, bz816073, bz816389
-
-* Tue Nov 27 2012 Doug Ledford <dledford@redhat.com> - 2.0-5
-- Oops, we really do need that install section in our service file, so
-  put it back
-
-* Tue Nov 27 2012 Doug Ledford <dledford@redhat.com> - 2.0-4
-- Don't add an Install section to our service file, that way we aren't
-  started unless our hardware is detected
-
-* Mon Nov 26 2012 Doug Ledford <dledford@redhat.com> - 2.0-3
-- Minor corrections to systemd service file
-
-* Mon Nov 26 2012 Doug Ledford <dledford@redhat.com> - 2.0-2
-- Minor whitespace cleanups
-- Correct the usage of MTRR_SCRIPT in rdma-init-kernel
-- Remove no longer relevant sections of config related to NFSoRDMA
-  (now handled by nfs-utils-rdma)
-
-* Mon Nov 26 2012 Doug Ledford <dledford@redhat.com> - 2.0-1
-- Update version to reflect addition of systemd support
-
-* Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0-12
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
-
-* Tue Feb 28 2012 Doug Ledford <dledford@redhat.com> - 1.0-11
-- Remove udev rules file, recent kernels create the proper devices without
-  need of the file
-- Remove the nfs-rdma init script so it can be taken over by the nfs-utils
-  package
-- Fix up some LSB header bogons in the init script (will convert to
-  systemd after this is tested and working and move sysv init script
-  to a sub-package)
-- Add ifdown-ib and update ifup-ib so we have more of the same capabilities
-  on IPoIB interfaces that RHEL has
-
-* Sat Jan 14 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0-10
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
-
-* Wed Feb 09 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0-9
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
-
-* Mon Aug 02 2010 Doug Ledford <dledford@redhat.com> - 1.0-8
-- Update udev rules syntax to eliminate warnings emitted via syslog (bz603264)
-- Add new init script for starting/stopping nfs over rdma support
-- Require that the nfs-rdma service be down before stopping the rdma
-  service (bz613437)
-- Change ifup-ib to properly account for the fact that the [ test program
-  does not process tests in order and fail immediately on first failing
-  test, resulting in error messages due to unquoted environment variables
-  that don't need quoting in the second test due to the fact that the
-  first test guarantees they exist.  Or that's how things should be, but
-  they aren't, so rewrite tests to accommodate this fact. (bz612284)
-- Use ip instead of ifconfig as ifconfig knows it doesn't handle infinband
-  hardware addresses properly (even though we don't care, we aren't using
-  it for that) and prints out copious warning messages (bz613086)
-  
-* Thu Feb 25 2010 Doug Ledford <dledford@redhat.com> - 1.0-7
-- Minor tweak to rdma.init to silence udev warnings (bz567981)
-
-* Tue Dec 01 2009 Doug Ledford <dledford@redhat.com> - 1.0-6
-- Tweak init script for LSB compliance
-- Tweak ifup-ib script to work properly with bonded slaves that need their
-  MTU set
-- Tweak ifup-ib script to properly change connected mode either on or off
-  instead of only setting it on but not turning it off if the setting changes
-
-* Sun Jul 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0-5
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
-
-* Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
-
-* Thu Oct 09 2008 Doug Ledford <dledford@redhat.com> - 1.0-3
-- Add the ifup-ib script so we support connected mode on ib interfaces
-
-* Mon Jun 09 2008 Doug Ledford <dledford@redhat.com> - 1.0-2
-- Attempt to use --subsystem-match=infiniband in the rdma init script use
-  of udevtrigger so we don't trigger the whole system
-- Add a requirement to stop opensm to the init script
-
-* Sun Jun 08 2008 Doug Ledford <dledford@redhat.com> - 1.0-1
-- Create an initial package for Fedora review
-
diff --git a/rdma.sriov-init b/rdma.sriov-init
deleted file mode 100644
index 73fae3c..0000000
--- a/rdma.sriov-init
+++ /dev/null
@@ -1,137 +0,0 @@
-#!/bin/bash
-#
-# Initialize SRIOV virtual devices
-#
-# This is usually run automatically by systemd after a hardware activation
-# event in udev has triggered a start of the rdma.service unit
-port=1
-
-function __get_parent_pci_dev()
-{
-    pushd /sys/bus/pci/devices/$pci_dev >/dev/null 2>&1
-    ppci_dev=`ls -l physfn | cut -f 2 -d '/'`
-    popd >/dev/null 2>&1
-}
-
-function __get_parent_ib_dev()
-{
-    ib_dev=`ls -l | awk '/'$ppci_dev'/ { print $9 }'`
-}
-
-function __get_parent_net_dev()
-{
-    for netdev in /sys/bus/pci/devices/$ppci_dev/net/* ; do
-	if [ "$port" -eq `cat $netdev/dev_port` ]; then
-	    netdev=`basename $netdev`
-	    break
-	fi
-    done
-}
-
-function __get_vf_num()
-{
-    pushd /sys/bus/pci/devices/$ppci_dev >/dev/null 2>&1
-    vf=`ls -l virtfn* | awk '/'$pci_dev'/ { print $9 }' | sed -e 's/virtfn//'`
-    popd >/dev/null 2>&1
-}
-
-function __en_sriov_set_vf()
-{
-    pci_dev=$1
-    shift
-    [ "$1" = "port" ] && port=$2 && shift 2
-    # We find our parent device by the netdev registered port number,
-    # however, the netdev port numbers start at 0 while the port
-    # numbers on the card start at 1, so we subtract 1 from our
-    # configured port number to get the netdev number
-    let port--
-    # Now we need to fill in the necessary information to pass to the ip
-    # command
-    __get_parent_pci_dev
-    __get_parent_net_dev
-    __get_vf_num
-    # The rest is easy.  Either the user passed valid arguments as options
-    # or they didn't
-    ip link set dev $netdev vf $vf $*
-}
-
-function __ib_sriov_set_vf()
-{
-    pci_dev=$1
-    shift
-    [ "$1" = "port" ] && port=$2 && shift 2
-    guid=""
-    __get_parent_pci_dev
-    __get_parent_ib_dev
-    [ -f $ib_dev/iov/$pci_dev/ports/$port/gid_idx/0 ] || return
-    while [ -n "$1" ]; do
-	case $1 in
-	    guid)
-		guid=$2
-		shift 2
-		;;
-	    pkey)
-	    	shift 1
-		break
-		;;
-	    *)
-	    	echo "Unknown option in $src"
-		shift
-		;;
-	esac
-    done
-    if [ -n "$guid" ]; then
-	guid_idx=`cat "$ib_dev/iov/$pci_dev/ports/$port/gid_idx/0"`
-	echo "$guid" > "$ib_dev/iov/ports/$port/admin_guids/$guid_idx"
-    fi
-    i=0
-    while [ -n "$1" ]; do
-    	for pkey in $ib_dev/iov/ports/$port/pkeys/*; do
-	    if [ `cat $pkey` = "$1" ]; then
-	    	echo `basename $pkey` > $ib_dev/iov/$pci_dev/ports/$port/pkey_idx/$i
-		let i++
-		break
-	    fi
-	done
-	shift
-    done
-}
-
-[ -d /sys/class/infiniband ] || return
-pushd /sys/class/infiniband >/dev/null 2>&1
-
-if [ -z "$*" ]; then
-    src=/etc/rdma/sriov-vfs
-    [ -f "$src" ] || return
-    grep -v "^#" $src | while read -a args; do
-	# When we use read -a to read into an array, the index starts at
-	# 0, unlike below where the arg count starts at 1
-	port=1
-	next_arg=1
-        [ "${args[$next_arg]}" = "port" ] && next_arg=3
-	case ${args[$next_arg]} in
-	    guid|pkey)
-		__ib_sriov_set_vf ${args[*]}
-		;;
-	    mac|vlan|rate|spoofchk|enable)
-		__en_sriov_set_vf ${args[*]}
-		;;
-	    *)
-		;;
-	esac
-    done
-else
-    [ "$2" = "port" ] && next_arg=$4 || next_arg=$2
-    case $next_arg in
-	guid|pkey)
-	    __ib_sriov_set_vf $*
-	    ;;
-	mac|vlan|rate|spoofchk|enable)
-	    __en_sriov_set_vf $*
-	    ;;
-	*)
-	    ;;
-    esac
-fi
-
-popd >/dev/null 2>&1
diff --git a/rdma.sriov-vfs b/rdma.sriov-vfs
deleted file mode 100644
index ef3e6c0..0000000
--- a/rdma.sriov-vfs
+++ /dev/null
@@ -1,41 +0,0 @@
-# All lines in this file that start with a # are comments,
-# all other lines will be processed without argument checks
-# Format of this file is one sriov vf setting per line with
-# arguments as follows:
-#    vf [port #] [ethernet settings | infiniband settings]
-#
-#  @vf - PCI address of device to configure as found in
-#	  /sys/bus/pci/devices/
-#
-#  [port @port] - Optional: the port number we are setting on
-#         the device.  We always assume port 1 unless told
-#         otherwise.
-#
-#  Ethernet settings:
-#  mac <mac address> [additional options]
-#    @mac - mac address to assign to vf...this is currently required by
-#        the ip program if you wish to be able to set any of the other
-#        settings.  If you don't set anything on a vf, it will get a
-#        random mac address and you may use static IP addressing to
-#        have a consistent IP address in spite of the random mac
-#    @* - additional arguments are passed to ip link without any
-#      further processing/checking, additional options that could
-#      be passed as of the time of writing this are:
-#        [ vlan VLANID [ qos VLAN-QOS ] ]
-#        [ rate TXRATE ]
-#        [ spoofchk { on | off} ]
-#        [ state { auto | enable | disable} ]
-#
-#  InfiniBand settings:
-#  [guid <guid>] [pkey <space separated list of pkeys>]
-#    @guid - 64bit GUID value to assign to vf.  Omit this option to
-#          use a subnet manager assigned GUID.
-#    @pkey - one or more pkeys to assign to this guest, must be last
-#          item on line
-#
-#  Examples:
-#
-#    0000:44:00.1 guid 05011403007bcba1 pkey 0xffff 0x8002
-#    0000:44:00.1 port 2 mac aa:bb:cc:dd:ee:f0 spoofchk on
-#    0000:44:00.2 port 1 pkey 0x7fff 0x0002
-#    0000:44:00.2 port 2 mac aa:bb:cc:dd:ee:f1 vlan 10 spoofchk on state enable
diff --git a/rdma.udev-ipoib-naming.rules b/rdma.udev-ipoib-naming.rules
deleted file mode 100644
index cd7f501..0000000
--- a/rdma.udev-ipoib-naming.rules
+++ /dev/null
@@ -1,10 +0,0 @@
-# This is a sample udev rules file that demonstrates how to get udev to
-# set the name of IPoIB interfaces to whatever you wish.  There is a
-# 16 character limit on network device names though, so don't go too nuts
-#
-# Important items to note: ATTR{type}=="32" is IPoIB interfaces, and the
-# ATTR{address} match must start with ?* and only reference the last 8
-# bytes of the address or else the address might not match on any given
-# start of the IPoIB stack
-#
-# ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", ATTR{type}=="32", ATTR{address}=="?*00:02:c9:03:00:31:78:f2", NAME="mlx4_ib3"
diff --git a/rdma.udev-rules b/rdma.udev-rules
deleted file mode 100644
index 24b1797..0000000
--- a/rdma.udev-rules
+++ /dev/null
@@ -1,18 +0,0 @@
-# We list all the various kernel modules that drive hardware in the
-# InfiniBand stack (and a few in the network stack that might not actually
-# be RDMA capable, but we don't know that at this time and it's safe to
-# enable the IB stack, so do so unilaterally) and on load of any of that
-# hardware, we trigger the rdma.service load in systemd
-
-SUBSYSTEM=="module", KERNEL=="cxgb*", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}="rdma.service"
-SUBSYSTEM=="module", KERNEL=="ib_*", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}="rdma.service"
-SUBSYSTEM=="module", KERNEL=="mlx*", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}="rdma.service"
-SUBSYSTEM=="module", KERNEL=="iw_*", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}="rdma.service"
-SUBSYSTEM=="module", KERNEL=="be2net", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}="rdma.service"
-SUBSYSTEM=="module", KERNEL=="usnic*", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}="rdma.service"
-
-# When we detect a new verbs device is added to the system, set the node
-# description on that device
-# If rdma-ndd is installed, defer the setting of the node description to it.
-SUBSYSTEM=="infiniband", KERNEL=="*", ACTION=="add", TEST!="/usr/sbin/rdma-ndd", RUN+="/bin/bash -c 'sleep 1; echo -n `hostname -s` %k > /sys/class/infiniband/%k/node_desc'"
-
diff --git a/sources b/sources
deleted file mode 100644
index e69de29..0000000
--- a/sources
+++ /dev/null