diff --git a/seabios-usb-boot.patch b/seabios-usb-boot.patch new file mode 100644 index 0000000..06dcd54 --- /dev/null +++ b/seabios-usb-boot.patch @@ -0,0 +1,275 @@ +From 5c244dfbfcc8b610eac30ffa39c009724843695b Mon Sep 17 00:00:00 2001 +From: Paolo Bonzini +Date: Mon, 5 Mar 2012 12:29:12 +0100 +Subject: [PATCH 1/4] scsi: do not send MODE SENSE except to QEMU disks + +This is the simplest way to avoid breaking boot on USB sticks that +stall when asked for the MODE SENSE page 4. Some old sticks do +not support the MODE SENSE command at all and just return a +"medium may have changed" unit attention condition when SeaBIOS +sends it! + +Reported-by: Dave Frodin +Signed-off-by: Paolo Bonzini +(cherry-picked from commit cb721714570520c02ae48efc26d3c04b8548d973) +--- + src/blockcmd.c | 37 +++++++++++++++++++++++-------------- + 1 files changed, 23 insertions(+), 14 deletions(-) + +diff --git a/src/blockcmd.c b/src/blockcmd.c +index 9919acb..4f3131c 100644 +--- a/src/blockcmd.c ++++ b/src/blockcmd.c +@@ -131,20 +131,29 @@ scsi_init_drive(struct drive_s *drive, const char *s, int *pdt, char **desc) + dprintf(1, "%s blksize=%d sectors=%d\n" + , s, drive->blksize, (unsigned)drive->sectors); + +- struct cdbres_mode_sense_geom geomdata; +- ret = cdb_mode_sense_geom(&dop, &geomdata); +- if (ret == 0) { +- u32 cylinders; +- cylinders = geomdata.cyl[0] << 16; +- cylinders |= geomdata.cyl[1] << 8; +- cylinders |= geomdata.cyl[2]; +- if (cylinders && geomdata.heads && +- drive->sectors <= 0xFFFFFFFFULL && +- ((u32)drive->sectors % (geomdata.heads * cylinders) == 0)) { +- drive->pchs.cylinders = cylinders; +- drive->pchs.heads = geomdata.heads; +- drive->pchs.spt = (u32)drive->sectors +- / (geomdata.heads * cylinders); ++ // We do not recover from USB stalls, so try to be safe and avoid ++ // sending the command if the (obsolete, but still provided by QEMU) ++ // fixed disk geometry page may not be supported. ++ // ++ // We could also send the command only to small disks (e.g. <504MiB) ++ // but some old USB keys only support a very small subset of SCSI which ++ // does not even include the MODE SENSE command! ++ // ++ if (! CONFIG_COREBOOT && memcmp(vendor, "QEMU ", 8) == 0) { ++ struct cdbres_mode_sense_geom geomdata; ++ ret = cdb_mode_sense_geom(&dop, &geomdata); ++ if (ret == 0) { ++ u32 cylinders; ++ cylinders = geomdata.cyl[0] << 16; ++ cylinders |= geomdata.cyl[1] << 8; ++ cylinders |= geomdata.cyl[2]; ++ if (cylinders && geomdata.heads && ++ drive->sectors <= 0xFFFFFFFFULL && ++ ((u32)drive->sectors % (geomdata.heads * cylinders) == 0)) { ++ drive->pchs.cylinders = cylinders; ++ drive->pchs.heads = geomdata.heads; ++ drive->pchs.spt = (u32)drive->sectors / (geomdata.heads * cylinders); ++ } + } + } + +-- +1.7.9.1 + + +From 04b3f8876a82eac4f06c8e89d6ca0e2c35f632a6 Mon Sep 17 00:00:00 2001 +From: Paolo Bonzini +Date: Thu, 15 Mar 2012 16:10:53 +0100 +Subject: [PATCH 2/4] Use OUT mode for all zero byte "scsi" transfers. + +Upstream status: posted at + http://permalink.gmane.org/gmane.comp.bios.coreboot.seabios/3466 + +Some devices can get confused if asked to "read" data during a zero +byte transfer, so consider these transfers as "writes". (Reported by +Steve Goodrich.) + +Also, extract out the code to determine the transfer direction into +cdb_is_read(). + +Signed-off-by: Kevin O'Connor +Signed-off-by: Paolo Bonzini +(cherry-picked from commit 1fd9a89082b807a4bb4ab6ce1285df474cb75746) +--- + src/blockcmd.c | 7 +++++++ + src/blockcmd.h | 1 + + src/usb-msc.c | 4 ++-- + src/virtio-scsi.c | 7 ++++--- + 4 files changed, 14 insertions(+), 5 deletions(-) + +diff --git a/src/blockcmd.c b/src/blockcmd.c +index 4f3131c..f77f3af 100644 +--- a/src/blockcmd.c ++++ b/src/blockcmd.c +@@ -31,6 +31,13 @@ cdb_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) + } + } + ++// Determine if the command is a request to pull data from the device ++int ++cdb_is_read(u8 *cdbcmd, u16 blocksize) ++{ ++ return blocksize && cdbcmd[0] != CDB_CMD_WRITE_10; ++} ++ + int + scsi_is_ready(struct disk_op_s *op) + { +diff --git a/src/blockcmd.h b/src/blockcmd.h +index bace649..4442ae1 100644 +--- a/src/blockcmd.h ++++ b/src/blockcmd.h +@@ -100,6 +100,7 @@ struct cdbres_mode_sense_geom { + } PACKED; + + // blockcmd.c ++int cdb_is_read(u8 *cdbcmd, u16 blocksize); + int cdb_get_inquiry(struct disk_op_s *op, struct cdbres_inquiry *data); + int cdb_get_sense(struct disk_op_s *op, struct cdbres_request_sense *data); + int cdb_test_unit_ready(struct disk_op_s *op); +diff --git a/src/usb-msc.c b/src/usb-msc.c +index cde08ce..8210a15 100644 +--- a/src/usb-msc.c ++++ b/src/usb-msc.c +@@ -74,13 +74,13 @@ usb_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) + cbw.dCBWSignature = CBW_SIGNATURE; + cbw.dCBWTag = 999; // XXX + cbw.dCBWDataTransferLength = bytes; +- cbw.bmCBWFlags = (cbw.CBWCB[0] == CDB_CMD_WRITE_10) ? USB_DIR_OUT : USB_DIR_IN; ++ cbw.bmCBWFlags = cdb_is_read(cdbcmd, blocksize) ? USB_DIR_IN : USB_DIR_OUT; + cbw.bCBWLUN = 0; // XXX + cbw.bCBWCBLength = USB_CDB_SIZE; + + // Transfer cbw to device. + int ret = usb_msc_send(udrive_g, USB_DIR_OUT +- , MAKE_FLATPTR(GET_SEG(SS), &cbw), sizeof(cbw)); ++ , MAKE_FLATPTR(GET_SEG(SS), &cbw), sizeof(cbw)); + if (ret) + goto fail; + +diff --git a/src/virtio-scsi.c b/src/virtio-scsi.c +index 9437116..76c5f29 100644 +--- a/src/virtio-scsi.c ++++ b/src/virtio-scsi.c +@@ -31,7 +31,7 @@ struct virtio_lun_s { + + static int + virtio_scsi_cmd(u16 ioaddr, struct vring_virtqueue *vq, struct disk_op_s *op, +- void *cdbcmd, u16 target, u16 lun, u32 len) ++ void *cdbcmd, u16 target, u16 lun, u16 blocksize) + { + struct virtio_scsi_req_cmd req; + struct virtio_scsi_resp_cmd resp; +@@ -44,7 +44,8 @@ virtio_scsi_cmd(u16 ioaddr, struct vring_virtqueue *vq, struct disk_op_s *op, + req.lun[3] = (lun & 0xff); + memcpy(req.cdb, cdbcmd, 16); + +- int datain = (req.cdb[0] != CDB_CMD_WRITE_10); ++ u32 len = op->count * blocksize; ++ int datain = cdb_is_read(cdbcmd, blocksize); + int data_idx = (datain ? 2 : 1); + int out_num = (datain ? 1 : 2); + int in_num = (len ? 3 : 2) - out_num; +@@ -89,7 +90,7 @@ virtio_scsi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) + return virtio_scsi_cmd(GET_GLOBAL(vlun->ioaddr), + GET_GLOBAL(vlun->vq), op, cdbcmd, + GET_GLOBAL(vlun->target), GET_GLOBAL(vlun->lun), +- blocksize * op->count); ++ blocksize); + } + + static int +-- +1.7.9.1 + + +From ff5cb1672acf63e2a82a765f04f4044ce5c19d6f Mon Sep 17 00:00:00 2001 +From: Paolo Bonzini +Date: Mon, 19 Mar 2012 11:44:05 +0100 +Subject: [PATCH 3/4] virtio-scsi: Fix virtio-scsi after cdb_is_read changes. + +The previous patch changes the way TEST_UNIT_READY is composed in the + buffers and breaks virtio-scsi. + +Signed-off-by: Paolo Bonzini +(cherry-picked from commit 8c313078917099a002d45f58d58ae2f4eb9a657f) +--- + src/virtio-scsi.c | 12 +++++++----- + 1 files changed, 7 insertions(+), 5 deletions(-) + +diff --git a/src/virtio-scsi.c b/src/virtio-scsi.c +index 76c5f29..0aa3388 100644 +--- a/src/virtio-scsi.c ++++ b/src/virtio-scsi.c +@@ -46,9 +46,8 @@ virtio_scsi_cmd(u16 ioaddr, struct vring_virtqueue *vq, struct disk_op_s *op, + + u32 len = op->count * blocksize; + int datain = cdb_is_read(cdbcmd, blocksize); +- int data_idx = (datain ? 2 : 1); +- int out_num = (datain ? 1 : 2); +- int in_num = (len ? 3 : 2) - out_num; ++ int in_num = (datain ? 2 : 1); ++ int out_num = (len ? 3 : 2) - in_num; + + sg[0].addr = MAKE_FLATPTR(GET_SEG(SS), &req); + sg[0].length = sizeof(req); +@@ -56,8 +55,11 @@ virtio_scsi_cmd(u16 ioaddr, struct vring_virtqueue *vq, struct disk_op_s *op, + sg[out_num].addr = MAKE_FLATPTR(GET_SEG(SS), &resp); + sg[out_num].length = sizeof(resp); + +- sg[data_idx].addr = op->buf_fl; +- sg[data_idx].length = len; ++ if (len) { ++ int data_idx = (datain ? 2 : 1); ++ sg[data_idx].addr = op->buf_fl; ++ sg[data_idx].length = len; ++ } + + /* Add to virtqueue and kick host */ + vring_add_buf(vq, sg, out_num, in_num, 0, 0); +-- +1.7.9.1 + + +From 9c70fa372c60e1195bc407fcd0064efc24f440a5 Mon Sep 17 00:00:00 2001 +From: Paolo Bonzini +Date: Mon, 19 Mar 2012 11:37:30 +0100 +Subject: [PATCH 4/4] ata: send TEST UNIT READY correctly + +The ATAPI driver does not need to support writes, but it does needs to +avoid the PIO transfer and DRQ check when TEST UNIT READY is sent. +Since TEST UNIT READY has no payload, checking for not busy is enough. + +This fixes a timeout when booting from CD/DVD, which fellaw@gmx.net +reported to cause boot failures. + +Signed-off-by: Paolo Bonzini +--- + src/ata.c | 14 ++++++++------ + 1 files changed, 8 insertions(+), 6 deletions(-) + +diff --git a/src/ata.c b/src/ata.c +index b33dcb6..752db4a 100644 +--- a/src/ata.c ++++ b/src/ata.c +@@ -642,13 +642,15 @@ atapi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) + ret = -2; + goto fail; + } +- if (!(status & ATA_CB_STAT_DRQ)) { +- dprintf(6, "send_atapi_cmd : DRQ not set (status %02x)\n", status); +- ret = -3; +- goto fail; +- } ++ if (blocksize) { ++ if (!(status & ATA_CB_STAT_DRQ)) { ++ dprintf(6, "send_atapi_cmd : DRQ not set (status %02x)\n", status); ++ ret = -3; ++ goto fail; ++ } + +- ret = ata_pio_transfer(op, 0, blocksize); ++ ret = ata_pio_transfer(op, 0, blocksize); ++ } + + fail: + // Enable interrupts +-- +1.7.9.1 +