/*
* Example configuration file for ChanServ.
*/
/*
* First, create the service.
*/
service
{
/*
* The name of the ChanServ client.
* If you change this value, you probably want to change the client directive in the configuration for the chanserv module too.
*/
nick = "ChanServ"
/*
* The username of the ChanServ client.
*/
user = "services"
/*
* The hostname of the ChanServ client.
*/
host = "services.host"
/*
* The realname of the ChanServ client.
*/
gecos = "Channel Registration Service"
/*
* The modes this client should use.
* Do not modify this unless you know what you are doing.
*
* These modes are very IRCd specific. If left commented, sane defaults
* are used based on what protocol module you have loaded.
*
* Note that setting this option incorrectly could potentially BREAK some, if
* not all, usefulness of the client. We will not support you if this client is
* unable to do certain things if this option is enabled.
*/
#modes = "+o"
/*
* An optional comma separated list of channels this service should join. Outside
* of log channels this is not very useful, as the service will just idle in the
* specified channels, and will not accept any types of commands.
*
* Prefixes may be given to the channels in the form of mode characters or prefix symbols.
*/
#channels = "@#services,#mychan"
}
/*
* Core ChanServ module.
*
* Provides essential functionality for ChanServ.
*/
module
{
name = "chanserv"
/*
* The name of the client that should be ChanServ.
*/
client = "ChanServ"
/*
* The default options for newly registered channels. Note that changing these options
* will have no effect on channels which are already registered. The list must be separated
* by spaces.
*
* The options are:
* - keeptopic: Retain topic when the channel is not in use
* - peace: Disallow users from kicking or removing modes from others who are of the same
* access level or superior
* - cs_private: Hide the channel from ChanServ's LIST command
* - restricted: Kick/ban users who are restricted from the channel
* - secureops: Only allow operator status to be given if the user is on the access list
* - securefounder: Only allow the real founder of the channel to drop the channel, change its
* password, or change the founder or successor
* - signkick: Use of ChanServ's KICK command will cause the user's nick to be signed to the kick.
* - signkick_level: Same as above, but the kick will not be signed if the user is at the same access
* level or superior to the target
* - topiclock: Disallow the topic to be changed except with ChanServ's TOPIC command
* - persist: Keep the channel open at all times
* - noautoop: Disables autoop on the channel
* - cs_keep_modes: Enables keep modes on the channel, which retains modes when the channel is
* not in use.
* - cs_no_expire: Enables no expire. Needs founder, successor (if set) or anyone in the access list
* to be a registered nick, otherwise the channel will be dropped.
* - none: No defaults
*
* This directive is optional, if left blank, the options will default to keeptopic, peace,
* securefounder, and signkick. If you really want no defaults, use "none" by itself as the option.
*/
defaults = "keeptopic peace securefounder signkick"
/*
* The maximum number of channels which may be registered to a single nickname.
*
* This directive is optional, but recommended.
* If not set, there will be no restriction on the numbers of channels a single nickname can have registered.
*/
maxregistered = 20
/*
* The length of time before a channel registration expires.
*
* This directive is optional, but recommended.
* If not set, the default is 30 days.
*/
expire = 30d
/*
* The maximum number of entries on a channel's access list.
* If not set, the default is 1024. This can be set to 0 for unlimited.
*/
accessmax = 1024
/*
* The length of time ChanServ stays in a channel after kicking a user from a channel they are not
* permitted to be in. This only occurs when the user is the only one in the channel.
*/
inhabit = 15s
/*
* Allow only IRC Operators to use ChanServ.
*
* This directive is optional.
*/
#opersonly = yes
/*
* Modes that will not be allowed to be locked. Oper only modes such as +O
* are always restricted from regular users and are not affected by this.
* Comment out for no restrictions.
*/
#nomlock = "P"
/*
* Modes that are required to be set and only set on all registered channels.
* These modes can not be locked or unlocked. The registered channel mode is
* automatically always required, if such a mode exists.
*/
#require = "r"
/*
* The maximum length of the reason field for user commands such as chanserv/kick
* and chanserv/ban.
*/
reasonmax = 200
/*
* The message formatting to use for signed kick messages.
* %n is the nick of the kicker
* %m is the message specified
*/
signkickformat = "%m (%n)"
/*
* If set, prevents channel access entries from containing hostmasks.
*/
disallow_hostmask_access = false
/*
* If set, prevents channels from being on access lists.
*/
disallow_channel_access = false
/*
* If set, ChanServ will always lower the timestamp of registered channels to their registration date.
* This prevents several race conditions where unauthorized users can join empty registered channels and set
* modes etc. prior to services deopping them.
*/
always_lower_ts = false
}
/*
* ChanServ privilege configuration.
*
* ChanServ privileges are used to determine who has what access in channels. By default the core has its own
* set of privileges it uses for various commands, which are defined below. Privilege ranks are used to
* determine how powerful privileges are relative to other privileges, which is used by Anope to determine
* who has greater access in a channel.
*
* If you load cs_access, you may define a level for the privilege, which is used by chanserv/access and chanserv/levels.
* The levels defined will be used as the default levels for newly registered channels.
* The level "founder" is a special level which means anyone with the privilege FOUNDER on the channel
* has that permission. Additionally, the level "disabled" means that no one can use the privilege, including founders.
*
* If you load cs_flags, you may define a flag associated with that privilege for use in chanserv/flags.
*
* If you load cs_xop, you may define a XOP command to associate the privilege with.
*
* The name of privileges are used to associate them with channel modes. If you are using an IRCd that allows you to define additional
* channel status modes, such as InspIRCd, you can associate privileges (and thus access levels, flags, xop) with the mode by naming
* the privileges appropriately. For example, if you had a channel mode called admin, you could create AUTOADMIN, ADMIN, and ADMINME
* privileges which would automatically be associated with that channel mode.
*
* Defining new privileges here is not useful unless you have a module (e.g. a third party one) made to check for
* the specific level you are defining.
*
* Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
*/
/*
* ACCESS_CHANGE privilege.
*
* Used by chanserv/access, chanserv/flags and chanserv/xop.
*
* Users with this permission can modify the permissions of others.
*/
privilege
{
name = "ACCESS_CHANGE"
desc = _("Allowed to modify the access list")
rank = 0
level = 10
flag = "f"
xop = "SOP"
}
/*
* ACCESS_LIST privilege.
*
* Used by chanserv/access, chanserv/flags, and chanserv/xop.
*
* Users with this permission can view the access list of channels.
*/
privilege
{
name = "ACCESS_LIST"
desc = _("Allowed to view the access list")
rank = 10
level = 3
flag = "f"
xop = "VOP"
}
/*
* AKICK privilege.
*
* Used by chanserv/akick and chanserv/enforce.
*
* Users with this permission can modify the AKICK list.
*/
privilege
{
name = "AKICK"
desc = _("Allowed to use the AKICK command")
rank = 250
level = 10
flag = "K"
xop = "SOP"
}
/*
* ASSIGN privilege.
*
* Used by botserv/assign.
*
* Users with this permission can assign and unassign BotServ bots to and from the channel.
*/
privilege
{
name = "ASSIGN"
desc = _("Allowed to assign/unassign a bot")
rank = 270
level = "founder"
flag = "s"
xop = "QOP"
}
/*
* AUTOHALFOP privilege.
*
* Used by the core.
*
* Users with this permission get halfop on join.
*/
privilege
{
name = "AUTOHALFOP"
desc = _("Automatic halfop upon join")
rank = 100
level = 4
flag = "H"
xop = "HOP"
}
/*
* AUTOOP privilege.
*
* Used by the core.
*
* Users with this permission get op on join.
*/
privilege
{
name = "AUTOOP"
desc = _("Automatic channel operator status upon join")
rank = 210
level = 5
flag = "O"
xop = "AOP"
}
/*
* AUTOOWNER privilege.
*
* Used by the core.
*
* Users with this permission get owner on join.
*/
privilege
{
name = "AUTOOWNER"
desc = _("Automatic owner upon join")
rank = 330
level = 9999
flag = "Q"
xop = "QOP"
}
/*
* AUTOPROTECT privilege.
*
* Used by the core.
*
* Users with this permission get admin on join.
*/
privilege
{
name = "AUTOPROTECT"
desc = _("Automatic protect upon join")
rank = 240
level = 10
flag = "A"
xop = "SOP"
}
/*
* AUTOVOICE privilege.
*
* Used by the core.
*
* Users with this permission get voice on join.
*/
privilege
{
name = "AUTOVOICE"
desc = _("Automatic voice on join")
rank = 50
level = 3
flag = "V"
xop = "VOP"
}
/*
* BADWORDS privilege.
*
* Used by botserv/badwords.
*
* Users with this permission can modify BotServ's BADWORDS list.
*/
privilege
{
name = "BADWORDS"
desc = _("Allowed to modify channel badwords list")
rank = 260
level = 10
flag = "K"
xop = "SOP"
}
/*
* BAN privilege.
*
* Used by chanserv/ban.
*
* Users with this permission can use the BAN command.
*/
privilege
{
name = "BAN"
desc = _("Allowed to ban users")
rank = 150
level = 4
flag = "b"
xop = "HOP"
}
/*
* FANTASIA privilege.
*
* Used by botserv/main and chanserv/xop.
*
* Users with this permission can use fantasy commands in the channel.
*/
privilege
{
name = "FANTASIA"
desc = _("Allowed to use fantasy commands")
rank = 30
level = 3
flag = "c"
xop = "VOP"
}
/*
* FOUNDER privilege.
*
* Used by chanserv/access, chanserv/akick,
* chanserv/drop, chanserv/set/founder,
* chanserv/set/securefounder, chanserv/set/successor and chanserv/xop.
*
* Users with this permission are treated as founders and can use
* commands restricted to founders.
*/
privilege
{
name = "FOUNDER"
desc = _("Allowed to issue commands restricted to channel founders")
rank = 360
level = 10000
flag = "F"
xop = "QOP"
}
/*
* GETKEY privilege.
*
* Used by chanserv/getkey and nickserv/ajoin.
*
* Users with this permission can get their channel key with GETKEY and
* can use nickserv/ajoin to join channels with keys.
*/
privilege
{
name = "GETKEY"
desc = _("Allowed to use GETKEY command")
rank = 180
level = 5
flag = "G"
xop = "AOP"
}
/*
* HALFOP privilege.
*
* Used by chanserv/mode, chanserv/halfop and chanserv/dehalfop.
*
* Users with this permission can use ChanServ to halfop and dehalfop
* others in the channel.
*/
privilege
{
name = "HALFOP"
desc = _("Allowed to (de)halfop users")
rank = 120
level = 5
flag = "h"
xop = "AOP"
}
/*
* HALFOPME privilege.
*
* Used by chanserv/mode, chanserv/halfop and chanserv/dehalfop.
*
* Users with this permission can use ChanServ to halfop and dehalfop
* themselves in the channel.
*/
privilege
{
name = "HALFOPME"
desc = _("Allowed to (de)halfop themself")
rank = 110
level = 4
flag = "h"
xop = "HOP"
}
/*
* INFO privilege.
*
* Used by botserv/info and chanserv/info.
*
* Users with this permission are allowed to get the full INFO output
* from BotServ and ChanServ.
*/
privilege
{
name = "INFO"
desc = _("Allowed to get full INFO output")
rank = 80
level = 9999
flag = "I"
xop = "QOP"
}
/*
* INVITE privilege.
*
* Used by chanserv/invite and nickserv/ajoin.
*
* Users with this permission can invite users through ChanServ and
* join invite only channels with nickserv/ajoin.
*/
privilege
{
name = "INVITE"
desc = _("Allowed to use the INVITE command")
rank = 190
level = 5
flag = "i"
xop = "AOP"
}
/*
* KICK privilege.
*
* Used by chanserv/kick.
*
* Users with this permission can use the KICK command.
*/
privilege
{
name = "KICK"
desc = _("Allowed to use the KICK command")
rank = 130
level = 4
flag = "k"
xop = "HOP"
}
/*
* MEMO privilege.
*
* Used by memoserv/del, memoserv/ignore, memoserv/info, memoserv/list,
* memoserv/main, memoserv/read and memoserv/set.
*
* Users with this permission can manage channel memos.
*/
privilege
{
name = "MEMO"
desc = _("Allowed to read channel memos")
rank = 280
level = 10
flag = "m"
xop = "SOP"
}
/*
* MODE privilege.
*
* Used by chanserv/mode.
*
* Users with this permission can set modes through ChanServ and change
* the mode lock.
*/
privilege
{
name = "MODE"
desc = _("Allowed to use the MODE command")
rank = 170
level = 9999
flag = "s"
xop = "QOP"
}
/*
* NOKICK privilege.
*
* Used by botserv/kick.
*
* Users with this permission are spared from automated BotServ kicks.
*/
privilege
{
name = "NOKICK"
desc = _("Prevents users being kicked by services")
rank = 20
level = 1
flag = "N"
xop = "VOP"
}
/*
* OP privilege.
*
* Used by chanserv/mode, chanserv/modes.
*
* Users with this permission can use ChanServ to op and deop
* others in the channel.
*/
privilege
{
name = "OP"
desc = _("Allowed to (de)op users")
rank = 230
level = 5
flag = "o"
xop = "SOP"
}
/*
* OPME privilege.
*
* Used by chanserv/mode, chanserv/modes.
*
* Users with this permission can use ChanServ to op and deop
* themselves in the channel.
*/
privilege
{
name = "OPME"
desc = _("Allowed to (de)op themself")
rank = 220
level = 5
flag = "o"
xop = "AOP"
}
/*
* OWNER privilege.
*
* Used by chanserv/mode and chanserv/modes.
*
* Users with this permission can use ChanServ to owner and deowner
* others in the channel.
*/
privilege
{
name = "OWNER"
desc = _("Allowed to (de)owner users")
rank = 350
level = "founder"
flag = "q"
xop = "QOP"
}
/*
* OWNERME privilege.
*
* Used by chanserv/mode and chanserv/modes.
*
* Users with this permission can use ChanServ to owner and deowner
* themselves in the channel.
*/
privilege
{
name = "OWNERME"
desc = _("Allowed to (de)owner themself")
rank = 340
level = 9999
flag = "q"
xop = "QOP"
}
/*
* PROTECT privilege.
*
* Used by chanserv/mode and chanserv/modes.
*
* Users with this permission can use ChanServ to protect and deprotect
* others in the channel.
*/
privilege
{
name = "PROTECT"
desc = _("Allowed to (de)protect users")
rank = 310
level = 9999
flag = "a"
xop = "QOP"
}
/*
* PROTECTME privilege.
*
* Used by chanserv/mode and chanserv/modes.
*
* Users with this permission can use ChanServ to protect and deprotect
* themselves in the channel.
*/
privilege
{
name = "PROTECTME"
desc = _("Allowed to (de)protect themself")
rank = 300
level = 10
flag = "a"
xop = "SOP"
}
/*
* SAY privilege.
*
* Used by botserv/control.
*
* Users with this permission can use the BotServ bot in the channel to
* say or do a /me with the provided message.
*/
privilege
{
name = "SAY"
desc = _("Allowed to use SAY and ACT commands")
rank = 90
level = 5
flag = "B"
xop = "AOP"
}
/*
* SET privilege.
*
* Used by botserv/kick, botserv/set, chanserv/clone, chanserv/log,
* chanserv/saset/noexpire and chanserv/set.
*
* Users with this permission can set what BotServ will kick for, change
* BotServ and ChanServ settings, clone ChanServ channel settings, and
* set ChanServ logging options.
*/
privilege
{
name = "SET"
desc = _("Allowed to set channel settings")
rank = 320
level = 9999
flag = "s"
xop = "QOP"
}
/*
* SIGNKICK privilege.
*
* Used by chanserv/ban and chanserv/kick.
*
* Users with this permission won't get their nick shown in the kick
* through ChanServ when the setting SIGNKICK is set to LEVEL.
*/
privilege
{
name = "SIGNKICK"
desc = _("No signed kick when SIGNKICK LEVEL is used")
rank = 140
level = 9999
flag = "K"
xop = "QOP"
}
/*
* TOPIC privilege.
*
* Used by chanserv/topic.
*
* Users with this permission can change the channel topic through ChanServ.
*/
privilege
{
name = "TOPIC"
desc = _("Allowed to change channel topics")
rank = 160
level = 5
flag = "t"
xop = "AOP"
}
/*
* UNBAN privilege.
*
* Used by chanserv/unban.
*
* Users with this permission can unban themselves and others through ChanServ.
*/
privilege
{
name = "UNBAN"
desc = _("Allowed to unban users")
rank = 200
level = 4
flag = "u"
xop = "HOP"
}
/*
* UNBANME privilege.
*
* Used by chanserv/unban.
*
* Users with this permission can unban themself through ChanServ.
*/
privilege
{
name = "UNBANME"
desc = _("Allowed to unban themself")
rank = 200
level = 4
flag = "U"
xop = "HOP"
}
/*
* VOICE privilege.
*
* Used by chanserv/mode and chanserv/modes.
*
* Users with this permission can use ChanServ to voice and devoice
* others in the channel.
*/
privilege
{
name = "VOICE"
desc = _("Allowed to (de)voice users")
rank = 70
level = 4
flag = "v"
xop = "HOP"
}
/*
* VOICEME privilege.
*
* Used by chanserv/mode and chanserv/modes.
*
* Users with this permission can use ChanServ to voice and devoice
* themselves in the channel.
*/
privilege
{
name = "VOICEME"
desc = _("Allowed to (de)voice themself")
rank = 60
level = 3
flag = "v"
xop = "VOP"
}
/*
* Core ChanServ commands.
*
* In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
* are loaded you can then configure the commands to be added to any client you like with any name you like.
*
* Additionally, you may provide a permission name that must be in the opertype of users executing the command.
*
* Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
*/
/* Command group configuration for ChanServ.
*
* Commands may optionally be placed into groups to make ChanServ's HELP output easier to understand.
* Remove the following groups to use the old behavior of simply listing all ChanServ commands from HELP.
*/
command_group
{
name = "chanserv/access"
description = _("Used to manage the list of privileged users")
}
command_group
{
name = "chanserv/status"
description = _("Used to modify the channel status of you or other users")
}
command_group
{
name = "chanserv/management"
description = _("Used to manage channels")
}
command_group
{
name = "chanserv/admin"
description = _("Services Operator commands")
}
/* Give it a help command. */
command { service = "ChanServ"; name = "HELP"; command = "generic/help"; }
/*
* cs_access
*
* Provides commands chanserv/access and chanserv/levels.
* Provides the access system "levels".
*
* Used for giving users access in channels using a levels system. Allows redefining which privileges
* are represented by given level on a per channel basis.
*
* The "LIST" subcommand of chanserv/access will show every access entry on the channel, including access
* entries not added by cs_access. The "level" of these entries will be the representation of the access
* entry by the other access system, which could be an XOP command name, or a set of flags.
*/
module { name = "cs_access" }
command { service = "ChanServ"; name = "ACCESS"; command = "chanserv/access"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "LEVELS"; command = "chanserv/levels"; group = "chanserv/access"; }
/*
* cs_akick
*
* Provides the command chanserv/akick.
*
* Used for preventing users from joining channels.
*/
module
{
name = "cs_akick"
/*
* The maximum number of entries on a channel's autokick list.
*/
autokickmax = 32
/*
* The default reason for an autokick if none is given.
*/
autokickreason = "User has been banned from the channel"
}
command { service = "ChanServ"; name = "AKICK"; command = "chanserv/akick"; group = "chanserv/management"; }
/*
* cs_ban
*
* Provides the command chanserv/ban.
*
* The configuration option 'kick' may be set in a command block for this command to control
* whether or not users will be kicked from the channel once banned. The default is 'yes'.
*
* The configuration option 'mode' may be set to control which mode is set, such as BAN or QUIET.
* The default is BAN.
*
* Used for banning users from channels.
*/
module { name = "cs_ban" }
command { service = "ChanServ"; name = "BAN"; command = "chanserv/ban"; }
/*
* cs_clone
*
* Provides the command chanserv/clone.
*
* Used for copying channel settings from one channel to another.
*/
module { name = "cs_clone" }
command { service = "ChanServ"; name = "CLONE"; command = "chanserv/clone"; group = "chanserv/management"; }
/*
* cs_drop
*
* Provides the command chanserv/drop.
*
* Used for unregistering channels.
*/
module { name = "cs_drop" }
command { service = "ChanServ"; name = "DROP"; command = "chanserv/drop"; }
/*
* cs_enforce
*
* Provides the command chanserv/enforce.
*
* Used to enforce various channel settings such as secureops and restricted.
*/
module { name = "cs_enforce" }
command { service = "ChanServ"; name = "ENFORCE"; command = "chanserv/enforce"; group = "chanserv/management"; }
/*
* cs_entrymsg
*
* Provides the command chanserv/entrymsg.
*
* Used to configure entry messages sent to users when they join a channel.
*/
module
{
name = "cs_entrymsg"
/* The maximum number of entrymsgs allowed per channel. If not set, defaults to 5. */
maxentries = 5
}
command { service = "ChanServ"; name = "ENTRYMSG"; command = "chanserv/entrymsg"; group = "chanserv/management"; }
/*
* cs_flags
*
* Provides the command chanserv/flags.
* Provides the access system "flags".
*
* Used for giving users access in channels.
*
* The "LIST" subcommand of chanserv/flags will show every access entry on the channel, including access
* entries not added by cs_flags. The "flags" of these entries will be the flags representation of the
* privilege set granted by the access entry.
*/
module { name = "cs_flags" }
command { service = "ChanServ"; name = "FLAGS"; command = "chanserv/flags"; group = "chanserv/access"; }
/*
* cs_getkey
*
* Provides the command chanserv/getkey.
*
* Used for getting the key for channels.
*/
module { name = "cs_getkey" }
command { service = "ChanServ"; name = "GETKEY"; command = "chanserv/getkey"; }
/*
* cs_info
*
* Provides the command chanserv/info.
*
* Used for getting information about channels.
*/
module { name = "cs_info" }
command { service = "ChanServ"; name = "INFO"; command = "chanserv/info"; }
/*
* cs_invite
*
* Provides the command chanserv/invite.
*
* Used for inviting yourself in to channels.
*/
module { name = "cs_invite" }
command { service = "ChanServ"; name = "INVITE"; command = "chanserv/invite"; }
/*
* cs_kick
*
* Provides the command chanserv/kick.
*
* Used for kicking users from channels.
*/
module { name = "cs_kick" }
command { service = "ChanServ"; name = "KICK"; command = "chanserv/kick"; }
/*
* cs_list
*
* Provides the commands:
* chanserv/list - Used for retrieving and searching the registered channel list.
* chanserv/set/private - Used for setting whether channels should show up in chanserv/list.
*/
module
{
name = "cs_list"
/*
* The maximum number of channels to be returned for a ChanServ LIST command.
*/
listmax = 50
}
command { service = "ChanServ"; name = "LIST"; command = "chanserv/list"; }
command { service = "ChanServ"; name = "SET PRIVATE"; command = "chanserv/set/private"; }
/*
* cs_log
*
* Provides the command chanserv/log.
*
* Use for configuring what actions on channels are logged and where.
*/
module
{
name = "cs_log"
/* Default log settings for newly registered channels */
#default
{
command = "chanserv/modes"
method = "MESSAGE @"
}
#default
{
service = "ChanServ"
command = "ACCESS"
method = "MESSAGE @"
}
#default
{
command = "chanserv/xop"
method = "MESSAGE @"
}
#default
{
service = "ChanServ"
command = "FLAGS"
method = "MESSAGE @"
}
}
command { service = "ChanServ"; name = "LOG"; command = "chanserv/log"; group = "chanserv/management"; }
/*
* cs_mode
*
* Provides the command chanserv/mode and chanserv/modes.
*
* Used for changing mode locks and changing modes. Multiple commands may be mapped to chanserv/modes, the
* configuration directives 'set' and 'unset' are used to tell chanserv/modes which modes should be set or
* unset when the command is executed.
*/
module
{
name = "cs_mode"
/*
* Default modes for mode lock, these are set on newly registered channels.
*
* If not set, the default is +nt.
*/
mlock = "+nt"
/*
* The maximum number of entries that may be on a mode lock list.
*
* This directive is optional.
*/
max = 32
}
command { service = "ChanServ"; name = "MODE"; command = "chanserv/mode"; group = "chanserv/management"; }
command { service = "ChanServ"; name = "OWNER"; command = "chanserv/modes"; group = "chanserv/status"; set = "OWNER" }
command { service = "ChanServ"; name = "DEOWNER"; command = "chanserv/modes"; group = "chanserv/status"; unset = "OWNER" }
command { service = "ChanServ"; name = "PROTECT"; command = "chanserv/modes"; group = "chanserv/status"; set = "PROTECT" }
command { service = "ChanServ"; name = "DEPROTECT"; command = "chanserv/modes"; group = "chanserv/status"; unset = "PROTECT" }
command { service = "ChanServ"; name = "OP"; command = "chanserv/modes"; group = "chanserv/status"; set = "OP" }
command { service = "ChanServ"; name = "DEOP"; command = "chanserv/modes"; group = "chanserv/status"; unset = "OP" }
command { service = "ChanServ"; name = "HALFOP"; command = "chanserv/modes"; group = "chanserv/status"; set = "HALFOP" }
command { service = "ChanServ"; name = "DEHALFOP"; command = "chanserv/modes"; group = "chanserv/status"; unset = "HALFOP" }
command { service = "ChanServ"; name = "VOICE"; command = "chanserv/modes"; group = "chanserv/status"; set = "VOICE" }
command { service = "ChanServ"; name = "DEVOICE"; command = "chanserv/modes"; group = "chanserv/status"; unset = "VOICE" }
/*
* cs_register
*
* Provides the commands chanserv/register.
*
* Used for registering channels.
*/
module { name = "cs_register" }
command { service = "ChanServ"; name = "REGISTER"; command = "chanserv/register"; }
/*
* cs_seen
*
* Provides the commands chanserv/seen and operserv/seen.
*
* Records the last time a user was seen and what they were doing and allows users to request this data.
* Also allows administrators to view stats about seen data and purge the database.
*/
module
{
name = "cs_seen"
/* If set, uses the older 1.8 style seen, which is less resource intensive */
simple = false
/* Sets the time to keep seen entries in the seen database. */
purgetime = "30d"
}
command { service = "OperServ"; name = "SEEN"; command = "operserv/seen"; permission = "operserv/seen"; }
/*
* cs_set
*
* Provides the commands:
* chanserv/set and chanserv/saset - Dummy help wrappers for the SET commands.
* chanserv/set/autoop - Used for configuring whether or not ChanServ automatically gives channel status to users.
* chanserv/set/bantype - Used for controlling what format of bans are placed on channels.
* chanserv/set/description - Used for changing channels descriptions.
* chanserv/set/founder - Used for changing a channel's founder.
* chanserv/set/keepmodes - Used for enabling or disabling keepmodes, which retains channel modes.
* chanserv/set/peace - Used for configuring if users are able to kick other users with higher access than them.
* chanserv/set/persist - Used for setting whether ChanServ should stay in channels after the last user leaves.
* chanserv/set/restricted - Used for setting whether users not on a channel's access list can join.
* chanserv/set/secure - Used for setting whether users who are recognized for accounts should have their access in channels.
* chanserv/set/securefounder - Used for setting whether users with founder level access in channels have true founder or not.
* chanserv/set/secureops - Used for restricting who can have channel op privilege in a channel to those whom have access in the channel.
* chanserv/set/signkick - Used for setting signkick, which appends the kicker's name to kicks sent through ChanServ.
* chanserv/set/successor - Used for setting channel successors, which become channel founders if the founders' account expires.
* chanserv/saset/noexpire - Used for setting noexpire, which prevents channels from expiring.
*
* This is a dummy command to provide a help wrapper for the various SET commands.
*/
module
{
name = "cs_set"
/*
* The default ban type for newly registered channels.
*
* defbantype can be:
*
* 0: ban in the form of *!user@host
* 1: ban in the form of *!*user@host
* 2: ban in the form of *!*@host
* 3: ban in the form of *!*user@*.domain
*/
defbantype = 2
/*
* If set, persistent channels have their creation times lowered to their
* original registration dates.
*/
persist_lower_ts = true
}
command { service = "ChanServ"; name = "SET"; command = "chanserv/set"; group = "chanserv/management"; }
command { service = "ChanServ"; name = "SET AUTOOP"; command = "chanserv/set/autoop"; }
command { service = "ChanServ"; name = "SET BANTYPE"; command = "chanserv/set/bantype"; }
command { service = "ChanServ"; name = "SET DESCRIPTION"; command = "chanserv/set/description"; }
command { service = "ChanServ"; name = "SET DESC"; command = "chanserv/set/description"; hide = yes; }
command { service = "ChanServ"; name = "SET FOUNDER"; command = "chanserv/set/founder"; }
command { service = "ChanServ"; name = "SET KEEPMODES"; command = "chanserv/set/keepmodes"; }
command { service = "ChanServ"; name = "SET PEACE"; command = "chanserv/set/peace"; }
command { service = "ChanServ"; name = "SET PERSIST"; command = "chanserv/set/persist"; }
command { service = "ChanServ"; name = "SET RESTRICTED"; command = "chanserv/set/restricted"; }
command { service = "ChanServ"; name = "SET SECURE"; command = "chanserv/set/secure"; }
command { service = "ChanServ"; name = "SET SECUREFOUNDER"; command = "chanserv/set/securefounder"; }
command { service = "ChanServ"; name = "SET SECUREOPS"; command = "chanserv/set/secureops"; }
command { service = "ChanServ"; name = "SET SIGNKICK"; command = "chanserv/set/signkick"; }
command { service = "ChanServ"; name = "SET SUCCESSOR"; command = "chanserv/set/successor"; }
command { service = "ChanServ"; name = "SET NOEXPIRE"; command = "chanserv/saset/noexpire"; permission = "chanserv/saset/noexpire"; }
/*
* cs_set_misc
*
* Provides the command chanserv/set/misc.
*
* Allows you to create arbitrary commands to set data, and have that data show up in chanserv/info.
* A field named misc_description may be given for use with help output.
*/
module { name = "cs_set_misc" }
command { service = "ChanServ"; name = "SET URL"; command = "chanserv/set/misc"; misc_description = _("Associate a URL with the channel"); }
command { service = "ChanServ"; name = "SET EMAIL"; command = "chanserv/set/misc"; misc_description = _("Associate an E-mail address with the channel"); }
/*
* cs_status
*
* Provides the command chanserv/status.
*
* Used for determining a user's access on a channel and whether
* or not they match any autokick entries.
*/
module { name = "cs_status" }
command { service = "ChanServ"; name = "STATUS"; command = "chanserv/status"; }
command { service = "ChanServ"; name = "WHY"; command = "chanserv/status"; hide = true; }
/*
* cs_suspend
*
* Provides the commands chanserv/suspend and chanserv/unsuspend.
*
* Used for suspending and unsuspending channels. Suspended channels can not be used but their settings are stored.
*/
module
{
name = "cs_suspend"
/*
* The length of time before a suspended channel expires.
*
* This directive is optional.
* If not set, the default is never.
*/
expire = 90d
/*
* Settings to show to non-opers in ChanServ's INFO output.
* Comment to completely disable showing any information about
* suspended channels to non-opers.
*/
show = "suspended, by, reason, on, expires"
}
command { service = "ChanServ"; name = "SUSPEND"; command = "chanserv/suspend"; permission = "chanserv/suspend"; group = "chanserv/admin"; }
command { service = "ChanServ"; name = "UNSUSPEND"; command = "chanserv/unsuspend"; permission = "chanserv/suspend"; group = "chanserv/admin"; }
/*
* cs_sync
*
* Provides the command chanserv/sync.
*
* Used to sync users channel status modes with what access they have.
*/
module { name = "cs_sync" }
command { service = "ChanServ"; name = "SYNC"; command = "chanserv/sync"; group = "chanserv/management"; }
/*
* cs_topic
*
* Provides the commands:
* chanserv/topic - Used for changing the channel topic. Useful in conjunction with chanserv/set/topiclock.
* chanserv/set/keeptopic - Used for configuring if ChanServ is to restore the channel topic when a channel is created.
*
*/
module { name = "cs_topic" }
command { service = "ChanServ"; name = "TOPIC"; command = "chanserv/topic"; group = "chanserv/management"; }
command { service = "ChanServ"; name = "SET KEEPTOPIC"; command = "chanserv/set/keeptopic"; }
/*
* cs_unban
*
* Provides the command chanserv/unban.
*
* Used for unbanning users from channels.
*/
module { name = "cs_unban" }
command { service = "ChanServ"; name = "UNBAN"; command = "chanserv/unban"; }
/*
* cs_updown
*
* Provides the commands chanserv/up and chanserv/down.
*
* Used for setting or removing your status modes on a channel.
*/
module { name = "cs_updown" }
command { service = "ChanServ"; name = "DOWN"; command = "chanserv/down"; group = "chanserv/status"; }
command { service = "ChanServ"; name = "UP"; command = "chanserv/up"; group = "chanserv/status"; }
/*
* cs_xop
*
* Provides the command chanserv/xop.
* Provides the access system "XOP".
*
* Used for giving users access in channels. Many commands may be linked to chanserv/xop, but the
* privileges given by each are determined by the privilege:xop settings above. These commands should
* be ordered from highest to lowest, as each command inherits the privileges of the commands below
* it.
*
* The "LIST" subcommand of chanserv/xop will show only XOP access entries of the given XOP type. You
* can not view the entire access list at once, and instead should use another access system to do that.
*/
module { name = "cs_xop" }
command { service = "ChanServ"; name = "QOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "SOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "AOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "HOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "VOP"; command = "chanserv/xop"; group = "chanserv/access"; }
/*
* Extra ChanServ related modules.
*/
/*
* cs_statusupdate
*
* This module automatically updates users' status on channels when the
* channel's access list is modified.
*/
module { name = "cs_statusupdate" }