%define build_all 1
%define build_alpha %{build_all}
%define build_arm %{build_all}
%define build_aarch64 %{build_all}
%define build_avr32 %{build_all}
%define build_blackfin %{build_all}
%define build_c6x %{build_all}
%define build_cris %{build_all}
%define build_frv %{build_all}
%define build_h8300 %{build_all}
%define build_hppa64 %{build_all}
%define build_ia64 %{build_all}
%define build_m32r %{build_all}
%define build_m68k %{build_all}
%define build_mips64 %{build_all}
%define build_mn10300 %{build_all}
%define build_powerpc64 %{build_all}
%define build_s390x %{build_all}
%define build_sh %{build_all}
%define build_sh64 %{build_all}
%define build_sparc64 %{build_all}
%define build_tile %{build_all}
%define build_x86_64 %{build_all}
%define build_xtensa %{build_all}
# gcc considers obsolete
%define build_score 0
# gcc doesn't build
%define build_microblaze 0
# 32-bit packages we don't build as we can use the 64-bit package instead
%define build_hppa 0
%define build_i386 0
%define build_mips 0
%define build_powerpc 0
%define build_s390 0
%define build_sh4 0
%define build_sparc 0
# gcc doesn't support
%define build_openrisc 0
# not available in binutils-2.22
%define build_unicore32 0
%global multilib_64_archs sparc64 ppc64 s390x x86_64
# The gcc versioning information. In a sed command below, the specfile winds
# pre-release version numbers in BASE-VER back to the last actually-released
# number.
%global DATE 20121114
%global SVNREV 193528
%global gcc_version 4.7.2
# Note, gcc_release must be integer, if you want to add suffixes to
# %{release}, append them after %{gcc_release} on Release: line.
%global gcc_release 2.aa.%{DATE}svn
Summary: Cross C compiler
Name: cross-gcc
Version: %{gcc_version}
Release: %{gcc_release}%{?dist}.1
License: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
Group: Development/Languages
URL: http://gcc.gnu.org
# The source for this package was pulled from upstream's vcs. Use the
# following commands to generate the tarball:
# svn export svn://gcc.gnu.org/svn/gcc/branches/redhat/gcc-4_6-branch@%{SVNREV} gcc-%{version}-%{DATE}
# tar cf - gcc-%{version}-%{DATE} | bzip2 -9 > gcc-%{version}-%{DATE}.tar.bz2
%define srcdir gcc-%{version}-%{DATE}-aarch64
Source0: %{srcdir}.tar.bz2
Patch0: gcc47-hack.patch
Patch1: gcc47-c++-builtin-redecl.patch
Patch2: gcc47-java-nomulti.patch
Patch3: gcc47-ppc32-retaddr.patch
Patch5: gcc47-rh330771.patch
Patch6: gcc47-i386-libgomp.patch
Patch7: gcc47-sparc-config-detection.patch
Patch8: gcc47-libgomp-omp_h-multilib.patch
Patch9: gcc47-libtool-no-rpath.patch
Patch11: gcc47-pr38757.patch
Patch13: gcc47-no-add-needed.patch
Patch14: gcc47-ppl-0.10.patch
Patch15: gcc47-libitm-fno-exceptions.patch
Patch16: gcc47-rh837630.patch
Patch17: gcc47-arm-hfp-ldso.patch
Patch100: cross-intl-filename.patch
# ia64 - http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44553
# m68k - http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53557
# alpha - http://gcc.gnu.org/bugzilla/show_bug.cgi?id=55344
Patch101: cross-gcc-with-libgcc.patch
Patch102: cross-gcc-sh-libgcc.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
BuildRequires: binutils
BuildRequires: zlib-devel, gettext, dejagnu, bison, flex, texinfo, sharutils
BuildRequires: cross-binutils-common >= 2.23
# Make sure pthread.h doesn't contain __thread tokens
# Make sure glibc supports stack protector
# Make sure glibc supports DT_GNU_HASH
BuildRequires: glibc-devel >= 2.4.90-13
%ifarch %{multilib_64_archs} sparcv9 ppc
# Ensure glibc{,-devel} is installed for both multilib arches
BuildRequires: /lib/libc.so.6 /usr/lib/libc.so /lib64/libc.so.6 /usr/lib64/libc.so
%endif
BuildRequires: elfutils-devel >= 0.147
BuildRequires: elfutils-libelf-devel >= 0.147
BuildRequires: gmp-devel >= 4.2, mpfr-devel >= 2.3.1, libmpc-devel
Provides: bundled(libiberty)
%description
Cross-build GNU C compiler collection.
%package -n cross-gcc-common
Summary: Cross-build GNU C compiler documentation and translation files
Group: Development/Languages
BuildArch: noarch
%description -n cross-gcc-common
Documentation, manual pages and translation files for cross-build GNU C
compiler.
This is the common part of a set of cross-build GNU C compiler packages for
building kernels for other architectures. No support for cross-building
user space programs is currently supplied as that would massively multiply the
number of packages.
%define do_package() \
%if %2 \
%package -n gcc-%1 \
Summary: Cross-build binary utilities for %1 \
Group: Development/Tools \
Requires: cross-gcc-common == %{version}-%{release} \
BuildRequires: binutils-%1 >= 2.23 \
Requires: binutils-%1 >= 2.23 \
%description -n gcc-%1 \
Cross-build GNU C compiler. \
\
Only building kernels is currently supported. Support for cross-building \
user space programs is not currently provided as that would massively multiply \
the number of packages. \
%endif
%do_package alpha-linux-gnu %{build_alpha}
%do_package arm-linux-gnu %{build_arm}
%do_package aarch64-linux-gnu %{build_aarch64}
%do_package avr32-linux-gnu %{build_avr32}
%do_package bfin-linux-gnu %{build_blackfin}
%do_package c6x-linux-gnu %{build_c6x}
%do_package cris-linux-gnu %{build_cris}
%do_package frv-linux-gnu %{build_frv}
%do_package h8300-linux-gnu %{build_h8300}
%do_package hppa-linux-gnu %{build_hppa}
%do_package hppa64-linux-gnu %{build_hppa64}
%do_package i386-linux-gnu %{build_i386}
%do_package ia64-linux-gnu %{build_ia64}
%do_package m32r-linux-gnu %{build_m32r}
%do_package m68k-linux-gnu %{build_m68k}
%do_package microblaze-linux-gnu %{build_microblaze}
%do_package mips-linux-gnu %{build_mips}
%do_package mips64-linux-gnu %{build_mips64}
%do_package mn10300-linux-gnu %{build_mn10300}
%do_package openrisc-linux-gnu %{build_openrisc}
%do_package powerpc-linux-gnu %{build_powerpc}
%do_package powerpc64-linux-gnu %{build_powerpc64}
%do_package s390-linux-gnu %{build_s390}
%do_package s390x-linux-gnu %{build_s390x}
%do_package score-linux-gnu %{build_score}
%do_package sh-linux-gnu %{build_sh}
%do_package sh4-linux-gnu %{build_sh4}
%do_package sh64-linux-gnu %{build_sh64}
%do_package sparc-linux-gnu %{build_sparc}
%do_package sparc64-linux-gnu %{build_sparc64}
%do_package tile-linux-gnu %{build_tile}
%do_package unicore32-linux-gnu %{build_unicore32}
%do_package x86_64-linux-gnu %{build_x86_64}
%do_package xtensa-linux-gnu %{build_xtensa}
# we won't build libgcc for those as it depends on C library or kernel headers
%define no_libgcc_targets tile-linux-gnu
###############################################################################
#
# Preparation
#
###############################################################################
%prep
%setup -q -n %{srcdir} -c
cd %{srcdir}
%patch0 -p0 -b .hack~
%patch1 -p0 -b .c++-builtin-redecl~
%patch2 -p0 -b .java-nomulti~
%patch3 -p0 -b .ppc32-retaddr~
%patch5 -p0 -b .rh330771~
%patch6 -p0 -b .i386-libgomp~
%patch7 -p0 -b .sparc-config-detection~
%patch8 -p0 -b .libgomp-omp_h-multilib~
%patch9 -p0 -b .libtool-no-rpath~
%patch11 -p0 -b .pr38757~
%patch13 -p0 -b .no-add-needed~
%if 0%{?fedora} < 15 || 0%{?rhel} < 7
%patch14 -p0 -b .ppl-0.10~
%endif
%patch15 -p0 -b .libitm-fno-exceptions~
%patch16 -p0 -b .rh837630~
%if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
%patch17 -p0 -b .arm-hfp-ldso~
%endif
%patch100 -p0 -b .cross-intl~
%patch101 -p1 -b .with-libgcc~
%patch102 -p0 -b .sh-libgcc~
# Move the version number back to 4.7.2
sed -i -e 's/4\.7\.3/4.7.2/' gcc/BASE-VER
echo 'Red Hat %{version}-%{gcc_release}' > gcc/DEV-PHASE
%if 0%{?fedora} >= 16 || 0%{?rhel} >= 7
# Default to -gdwarf-4 -fno-debug-types-section rather than -gdwarf-2
sed -i '/UInteger Var(dwarf_version)/s/Init(2)/Init(4)/' gcc/common.opt
sed -i '/flag_debug_types_section/s/Init(1)/Init(0)/' gcc/common.opt
sed -i '/dwarf_record_gcc_switches/s/Init(0)/Init(1)/' gcc/common.opt
sed -i 's/\(may be either 2, 3 or 4; the default version is \)2\./\14./' gcc/doc/invoke.texi
%else
# Default to -gdwarf-3 rather than -gdwarf-2
sed -i '/UInteger Var(dwarf_version)/s/Init(2)/Init(3)/' gcc/common.opt
sed -i 's/\(may be either 2, 3 or 4; the default version is \)2\./\13./' gcc/doc/invoke.texi
sed -i 's/#define[[:blank:]]*EMIT_ENTRY_VALUE[[:blank:]].*$/#define EMIT_ENTRY_VALUE 0/' gcc/{var-tracking,dwarf2out}.c
sed -i 's/#define[[:blank:]]*EMIT_TYPED_DWARF_STACK[[:blank:]].*$/#define EMIT_TYPED_DWARF_STACK 0/' gcc/dwarf2out.c
sed -i 's/#define[[:blank:]]*EMIT_DEBUG_MACRO[[:blank:]].*$/#define EMIT_DEBUG_MACRO 0/' gcc/dwarf2out.c
%endif
./contrib/gcc_update --touch
LC_ALL=C sed -i -e 's/\xa0/ /' gcc/doc/options.texi
function prep_target () {
target=$1
cond=$2
if [ $cond != 0 ]
then
echo $1 >&5
fi
}
cd ..
(
prep_target alpha-linux-gnu %{build_alpha}
prep_target arm-linux-gnu %{build_arm}
prep_target aarch64-linux-gnu %{build_aarch64}
prep_target avr32-linux-gnu %{build_avr32}
prep_target bfin-linux-gnu %{build_blackfin}
prep_target c6x-linux-gnu %{build_c6x}
prep_target cris-linux-gnu %{build_cris}
prep_target frv-linux-gnu %{build_frv}
prep_target h8300-linux-gnu %{build_h8300}
prep_target hppa-linux-gnu %{build_hppa}
prep_target hppa64-linux-gnu %{build_hppa64}
prep_target i386-linux-gnu %{build_i386}
prep_target ia64-linux-gnu %{build_ia64}
prep_target m32r-linux-gnu %{build_m32r}
prep_target m68k-linux-gnu %{build_m68k}
prep_target microblaze-linux-gnu %{build_microblaze}
prep_target mips-linux-gnu %{build_mips}
prep_target mips64-linux-gnu %{build_mips64}
prep_target mn10300-linux-gnu %{build_mn10300}
prep_target openrisc-linux-gnu %{build_openrisc}
prep_target powerpc-linux-gnu %{build_powerpc}
prep_target powerpc64-linux-gnu %{build_powerpc64}
prep_target s390-linux-gnu %{build_s390}
prep_target s390x-linux-gnu %{build_s390x}
prep_target score-linux-gnu %{build_score}
prep_target sh-linux-gnu %{build_sh}
prep_target sh4-linux-gnu %{build_sh4}
prep_target sh64-linux-gnu %{build_sh64}
prep_target sparc-linux-gnu %{build_sparc}
prep_target sparc64-linux-gnu %{build_sparc64}
prep_target tile-linux-gnu %{build_tile}
prep_target unicore32-linux-gnu %{build_unicore32}
prep_target x86_64-linux-gnu %{build_x86_64}
prep_target xtensa-linux-gnu %{build_xtensa}
) 5>target.list
n=0
for target in `cat target.list`
do
n=1
break
done
if [ $n = 0 ]
then
echo "No targets selected" >&2
exit 8
fi
###############################################################################
#
# Build
#
###############################################################################
%build
function config_target () {
arch=$1
cross=$arch-
build_dir=$arch
case $arch in
arm-*) target=arm-linux-gnueabi;;
avr32-*) target=avr-linux;;
bfin-*) target=bfin-uclinux;;
c6x-*) target=c6x-uclinux;;
h8300-*) target=h8300-elf;;
mn10300-*) target=am33_2.0-linux;;
openrisc-*) target=or32-linux;;
parisc-*) target=hppa-linux;;
score-*) target=score-elf;;
sh64-*) target=sh64-linux;;
tile-*) target=tilegx-linux;;
v850-*) target=v850e-linux;;
x86-*) target=x86_64-linux;;
*) target=$arch;;
esac
echo $arch: target is $target
#export CFLAGS="$RPM_OPT_FLAGS"
CONFIG_FLAGS=
COPT=
case $arch in
powerpc-*|powerpc64-*)
COPT="--with-cpu-32=power4 --with-tune-32=power6 --with-cpu-64=power4 --with-tune-64=power6"
;;
s390-*)
COPT="--with-arch=z9-109 --with-tune=z10 --enable-decimal-float"
;;
sh4-*)
COPT="--with-arch_32=sh"
;;
sh-*)
CONFIG_FLAGS=--with-multilib-list=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single,!m2a,!m2a-single
;;
sh64-*)
CONFIG_FLAGS=--with-multilib-list=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu
;;
sparc-*)
COPT="--with-long-double-128 --disable-linux-futex"
;;
tile-*)
COPT="--with-arch_32=tilepro"
;;
x86-*)
COPT="--with-arch_32=i686"
;;
esac
mkdir $build_dir
cd $build_dir
# We could optimize the cross builds size by --enable-shared but the produced
# binaries may be less convenient in the embedded environment.
AR_FOR_TARGET=%{_bindir}/$arch-ar \
AS_FOR_TARGET=%{_bindir}/$arch-as \
DLLTOOL_FOR_TARGET=%{_bindir}/$arch-dlltool \
LD_FOR_TARGET=%{_bindir}/$arch-ld \
NM_FOR_TARGET=%{_bindir}/$arch-nm \
OBJDUMP_FOR_TARGET=%{_bindir}/$arch-objdump \
RANLIB_FOR_TARGET=%{_bindir}/$arch-ranlib \
STRIP_FOR_TARGET=%{_bindir}/$arch-strip \
WINDRES_FOR_TARGET=%{_bindir}/$arch-windres \
WINDMC_FOR_TARGET=%{_bindir}/$arch-windmc \
LDFLAGS='-Wl,-z,relro ' \
../%{srcdir}/configure \
--disable-dependency-tracking \
--disable-silent-rules \
--prefix=%{_prefix} \
--exec-prefix=%{_exec_prefix} \
--bindir=%{_bindir} \
--sbindir=%{_sbindir} \
--sysconfdir=%{_sysconfdir} \
--datadir=%{_datadir} \
--includedir=%{_includedir} \
--libexecdir=%{_libexecdir} \
--localstatedir=%{_localstatedir} \
--sharedstatedir=%{_sharedstatedir} \
--mandir=%{_mandir} \
--infodir=%{_infodir} \
--build=%{_target_platform} \
--host=%{_target_platform} \
--target=$target \
--enable-targets=all \
--program-prefix=$cross \
--enable-languages=c --with-newlib --without-headers \
--disable-sjlj-exceptions --with-system-libunwind \
--disable-nls --disable-threads --disable-shared \
--disable-libmudflap --disable-libssp --disable-libgomp \
--disable-libquadmath --disable-gold \
--disable-decimal-float \
--enable-checking=$checking \
--enable-gnu-unique-object \
--enable-linker-build-id \
--disable-plugin \
--enable-nls \
--with-system-zlib \
--with-bugurl=http://bugzilla.redhat.com/bugzilla/ \
--enable-obsolete \
$CONFIG_FLAGS
%if 0
--libdir=%{_libdir} # we want stuff in /usr/lib/gcc/ not /usr/lib64/gcc
--with-sysroot=%{_prefix}/$target/sys-root
%endif
cd ..
}
for target in `cat target.list`
do
config_target $target
done
function build_target () {
arch=$1
AR_FOR_TARGET=%{_bindir}/$arch-ar \
AS_FOR_TARGET=%{_bindir}/$arch-as \
DLLTOOL_FOR_TARGET=%{_bindir}/$arch-dlltool \
LD_FOR_TARGET=%{_bindir}/$arch-ld \
NM_FOR_TARGET=%{_bindir}/$arch-nm \
OBJDUMP_FOR_TARGET=%{_bindir}/$arch-objdump \
RANLIB_FOR_TARGET=%{_bindir}/$arch-ranlib \
STRIP_FOR_TARGET=%{_bindir}/$arch-strip \
WINDRES_FOR_TARGET=%{_bindir}/$arch-windres \
WINDMC_FOR_TARGET=%{_bindir}/$arch-windmc \
make -C $target %{_smp_mflags} tooldir=%{_prefix} all-gcc
case $arch in
%{no_libgcc_targets})
;;
*)
make -C $target %{_smp_mflags} tooldir=%{_prefix} all-target-libgcc
;;
esac
}
for target in `cat target.list`
do
build_target $target
done
# for documentation purposes only
mkdir stuff
cd stuff
../%{srcdir}/configure \
--disable-dependency-tracking \
--disable-silent-rules \
--prefix=%{_prefix} \
--exec-prefix=%{_exec_prefix} \
--bindir=%{_bindir} \
--sbindir=%{_sbindir} \
--sysconfdir=%{_sysconfdir} \
--datadir=%{_datadir} \
--includedir=%{_includedir} \
--libdir=%{_libdir} \
--libexecdir=%{_libexecdir} \
--localstatedir=%{_localstatedir} \
--sharedstatedir=%{_sharedstatedir} \
--mandir=%{_mandir} \
--infodir=%{_infodir} \
--build=%{_target_platform} \
--host=%{_target_platform} \
--program-prefix=cross- \
--enable-languages=c --without-headers \
--enable-sjlj-exceptions --with-system-libunwind \
--disable-nls --disable-threads --disable-shared \
--disable-libmudflap --disable-libssp --disable-libgomp \
--disable-libquadmath --disable-gold \
--disable-decimal-float \
--enable-checking=$checking \
--enable-gnu-unique-object \
--enable-linker-build-id \
--enable-plugin \
--enable-nls \
--with-system-zlib \
--with-bugurl=http://bugzilla.redhat.com/bugzilla/
cd ..
###############################################################################
#
# Installation
#
###############################################################################
%install
rm -rf %{buildroot}
function install_bin () {
arch=$1
case $arch in
%{no_libgcc_targets}) with_libgcc="";;
*) with_libgcc="install-target-libgcc";;
esac
make -C $arch DESTDIR=%{buildroot} install-gcc ${with_libgcc}
}
for target in `cat target.list`
do
install_bin $target
done
# For cross-gcc we drop the documentation.
rm -rf %{buildroot}%{_infodir}
# Remove binaries we will not be including, so that they don't end up in
# gcc-debuginfo
FULLPATH=%{buildroot}%{_prefix}/lib/gcc/%{gcc_target_platform}/%{gcc_version}
rm -f %{buildroot}%{_libdir}/{libffi*,libiberty.a}
rm -f %{buildroot}%{_libexecdir}/gcc/*/%{gcc_version}/install-tools/{mkheaders,fixincl}
rm -f %{buildroot}%{_prefix}/bin/*-gcc-%{version} || :
rm -f %{buildroot}%{_bindir}/*-ar || :
rm -f %{buildroot}%{_bindir}/*-nm || :
rm -f %{buildroot}%{_bindir}/*-ranlib || :
rmdir %{buildroot}%{_includedir}
find %{buildroot}%{_datadir} -name gcc.mo |
while read x
do
y=`dirname $x`
mv $x $y/cross-gcc.mo
done
%find_lang cross-gcc
gzip %{buildroot}%{_mandir}/man1/*.1
rm %{buildroot}%{_mandir}/man7/*.7
rmdir %{buildroot}%{_mandir}/man7
# All the installed manual pages and translation files for each program are the
# same, so symlink them to the common package
cd %{buildroot}%{_mandir}/man1
for i in cross-cpp.1.gz cross-gcc.1.gz cross-gcov.1.gz
do
j=${i#cross-}
for k in *-$j
do
if [ $k != $i ]
then
mv $k $i
ln -s $i $k
fi
done
done
cd -
function install_lang () {
arch=$1
cpu=${arch%%%%-*}
(
echo '%%defattr(-,root,root,-)'
echo '%{_bindir}/'$arch'-*'
echo '%{_mandir}/man1/'$arch'-*'
case $cpu in
avr32) target_cpu=avr;;
bfin) target_cpu=bfin;;
h8300) target_cpu=h8300;;
mn10300) target_cpu=am33_2.0;;
openrisc) target_cpu=openrisc;;
parisc) target_cpu=hppa;;
score) target_cpu=score;;
tile) target_cpu=tilegx;;
v850) target_cpu=v850e;;
x86) target_cpu=x86_64;;
*) target_cpu=$cpu;;
esac
echo '/usr/lib/gcc/'$target_cpu'-*/'
echo '%{_libexecdir}/gcc/'$target_cpu'-*/'
) >files.$arch
}
for target in `cat target.list`
do
install_lang $target
done
%define __ar_no_strip $RPM_BUILD_DIR/%{srcdir}/ar-no-strip
cat >%{__ar_no_strip} <<EOF
#!/bin/bash
f=\$2
if [ \${f##*/} = libgcc.a -o \${f##*/} = libgcov.a ]
then
:
else
%{__strip} \$*
fi
EOF
chmod +x %{__ar_no_strip}
%undefine __strip
%define __strip %{__ar_no_strip}
###############################################################################
#
# Cleanup
#
###############################################################################
%clean
rm -rf %{buildroot}
###############################################################################
#
# Filesets
#
###############################################################################
%files -n cross-gcc-common -f cross-gcc.lang
%doc %{srcdir}/COPYING*
%doc %{srcdir}/README
%{_mandir}/man1/cross-*
%define do_files() \
%if %2 \
%files -n gcc-%1 -f files.%1 \
%endif
%do_files alpha-linux-gnu %{build_alpha}
%do_files arm-linux-gnu %{build_arm}
%do_files aarch64-linux-gnu %{build_aarch64}
%do_files avr32-linux-gnu %{build_avr32}
%do_files bfin-linux-gnu %{build_blackfin}
%do_files c6x-linux-gnu %{build_c6x}
%do_files cris-linux-gnu %{build_cris}
%do_files frv-linux-gnu %{build_frv}
%do_files h8300-linux-gnu %{build_h8300}
%do_files hppa-linux-gnu %{build_hppa}
%do_files hppa64-linux-gnu %{build_hppa64}
%do_files i386-linux-gnu %{build_i386}
%do_files ia64-linux-gnu %{build_ia64}
%do_files m32r-linux-gnu %{build_m32r}
%do_files m68k-linux-gnu %{build_m68k}
%do_files microblaze-linux-gnu %{build_microblaze}
%do_files mips-linux-gnu %{build_mips}
%do_files mips64-linux-gnu %{build_mips64}
%do_files mn10300-linux-gnu %{build_mn10300}
%do_files openrisc-linux-gnu %{build_openrisc}
%do_files powerpc-linux-gnu %{build_powerpc}
%do_files powerpc64-linux-gnu %{build_powerpc64}
%do_files s390-linux-gnu %{build_s390}
%do_files s390x-linux-gnu %{build_s390x}
%do_files score-linux-gnu %{build_score}
%do_files sh-linux-gnu %{build_sh}
%do_files sh4-linux-gnu %{build_sh4}
%do_files sh64-linux-gnu %{build_sh64}
%do_files sparc-linux-gnu %{build_sparc}
%do_files sparc64-linux-gnu %{build_sparc64}
%do_files tile-linux-gnu %{build_tile}
%do_files unicore32-linux-gnu %{build_unicore32}
%do_files x86_64-linux-gnu %{build_x86_64}
%do_files xtensa-linux-gnu %{build_xtensa}
%changelog
* Tue Feb 05 2013 Lubomir Rintel <lkundrak@v3.sk> - 4.7.2-2.aa.20121114.1
- Build for el6
* Tue Nov 20 2012 David Howells <dhowells@redhat.com> - 4.7.2-2.aa.20121114
- Fixed the sh64 libgcc compilation.
* Thu Nov 15 2012 David Howells <dhowells@redhat.com> - 4.7.2-1.aa.20121114
- Move to the gcc-4.7-aarch64 SVN branch and add a compiler for the aarch64 arch.
- Disable sjlj exception support.
- Compile libgcc for certain platforms.
- Fix fuzz in sparc-config-detection patch.
* Mon Oct 15 2012 Jon Ciesla <limburgher@gmail.com> - 4.7.1-0.1.20120606.2
- Provides: bundled(libiberty)
* Wed Jul 18 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 4.7.1-0.1.20120606.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
* Mon Jun 11 2012 David Howells <dhowells@redhat.com> - 4.7.1-0.1.20120606
- Update to gcc-4.7.1-RC-20120606 to fix an ICE in the MIPS compiler.
- The SH64 compilation patches are now redundant.
* Wed May 30 2012 David Howells <dhowells@redhat.com> - 4.7.0-1
- Update to gcc-4.7.0.
- Add patches to fix SH64 compilation.
- Build separate SH and SH64 compilers.
* Thu Mar 22 2012 David Howells <dhowells@redhat.com> - 4.7.0-0.11.4
- Add missing BuildRequires
* Thu Mar 22 2012 David Howells <dhowells@redhat.com> - 4.7.0-0.11.3
- Fix gcc47-ppl-0.10.patch fuzz.
* Thu Mar 22 2012 David Howells <dhowells@redhat.com> - 4.7.0-0.11.2
- Initial import of cross-binutils [BZ 766166].
* Mon Oct 31 2011 Rex Dieter <rdieter@fedoraproject.org> 4.6.2-1.fc17.1
- rebuild (gmp)