%global glib2_version 2.45.8
%global libxmlb_version 0.1.3
%global libgusb_version 0.3.5
%global libcurl_version 7.62.0
%global libjcat_version 0.1.0
%global systemd_version 231
%global json_glib_version 1.1.1
%global fwupdplugin_version 7
# although we ship a few tiny python files these are utilities that 99.99%
# of users do not need -- use this to avoid dragging python onto CoreOS
%global __requires_exclude ^%{python3}$
# PPC64 is too slow to complete the tests under 3 minutes...
%ifnarch ppc64le
%global enable_tests 1
%endif
%global enable_dummy 1
# fwupd.efi is only available on these arches
%ifarch x86_64 aarch64
%global have_uefi 1
%endif
# gpio.h is only available on these arches
%ifarch x86_64 aarch64
%global have_gpio 1
%endif
# flashrom is only available on these arches
%ifarch i686 x86_64 armv7hl aarch64 ppc64le
%global have_flashrom 1
%endif
%ifarch i686 x86_64
%global have_msr 1
%endif
# libsmbios is only available on x86
%ifarch x86_64
%global have_dell 1
%endif
# AMD PSP is only available on x86
%ifarch x86_64
%global have_pci_psp 1
%endif
# only available recently
%if 0%{?fedora} >= 30
%global have_modem_manager 1
%endif
Summary: Firmware update daemon
Name: fwupd
Version: 1.8.2
Release: 1%{?dist}
License: LGPLv2+
URL: https://github.com/fwupd/fwupd
Source0: http://people.freedesktop.org/~hughsient/releases/%{name}-%{version}.tar.xz
BuildRequires: gettext
BuildRequires: glib2-devel >= %{glib2_version}
BuildRequires: libxmlb-devel >= %{libxmlb_version}
BuildRequires: libgcab1-devel
BuildRequires: libgudev1-devel
BuildRequires: libgusb-devel >= %{libgusb_version}
BuildRequires: libcurl-devel >= %{libcurl_version}
BuildRequires: libjcat-devel >= %{libjcat_version}
BuildRequires: polkit-devel >= 0.103
BuildRequires: protobuf-c-devel
BuildRequires: sqlite-devel
BuildRequires: systemd >= %{systemd_version}
BuildRequires: systemd-devel
BuildRequires: libarchive-devel
BuildRequires: libcbor-devel
BuildRequires: gobject-introspection-devel
BuildRequires: gcab
%ifarch %{valgrind_arches}
BuildRequires: valgrind
BuildRequires: valgrind-devel
%endif
BuildRequires: gi-docgen
BuildRequires: gnutls-devel
BuildRequires: gnutls-utils
BuildRequires: meson
BuildRequires: json-glib-devel >= %{json_glib_version}
BuildRequires: vala
BuildRequires: bash-completion
BuildRequires: git-core
%if 0%{?have_flashrom}
BuildRequires: flashrom-devel >= 1.2-2
%endif
%if 0%{?have_modem_manager}
BuildRequires: ModemManager-glib-devel >= 1.10.0
BuildRequires: libqmi-devel >= 1.22.0
BuildRequires: libmbim-devel
%endif
%if 0%{?have_uefi}
BuildRequires: efivar-devel >= 33
BuildRequires: python3 python3-cairo python3-gobject
BuildRequires: pango-devel
BuildRequires: cairo-devel cairo-gobject-devel
BuildRequires: freetype
BuildRequires: fontconfig
BuildRequires: google-noto-sans-cjk-ttc-fonts
BuildRequires: tpm2-tss-devel >= 2.2.3
%endif
%if 0%{?have_dell}
BuildRequires: efivar-devel >= 33
BuildRequires: libsmbios-devel >= 2.3.0
%endif
Requires(post): systemd
Requires(preun): systemd
Requires(postun): systemd
Requires: glib2%{?_isa} >= %{glib2_version}
Requires: libxmlb%{?_isa} >= %{libxmlb_version}
Requires: libgusb%{?_isa} >= %{libgusb_version}
Requires: bubblewrap
Requires: shared-mime-info
Obsoletes: fwupd-sign < 0.1.6
Obsoletes: libebitdo < 0.7.5-3
Obsoletes: libdfu < 1.0.0
Obsoletes: fwupd-labels < 1.1.0-1
Obsoletes: dbxtool < 9
Provides: dbxtool
# optional, but a really good idea
Recommends: udisks2
Recommends: bluez
Recommends: jq
%if 0%{?have_modem_manager}
Recommends: %{name}-plugin-modem-manager
%endif
%if 0%{?have_flashrom}
Recommends: %{name}-plugin-flashrom
%endif
%if 0%{?have_uefi}
Recommends: %{name}-efi
Recommends: %{name}-plugin-uefi-capsule-data
%endif
%description
fwupd is a daemon to allow session software to update device firmware.
%package devel
Summary: Development package for %{name}
Requires: %{name}%{?_isa} = %{version}-%{release}
Obsoletes: libebitdo-devel < 0.7.5-3
Obsoletes: libdfu-devel < 1.0.0
%description devel
Files for development with %{name}.
%package tests
Summary: Data files for installed tests
Requires: %{name}%{?_isa} = %{version}-%{release}
%description tests
Data files for installed tests.
%if 0%{?have_modem_manager}
%package plugin-modem-manager
Summary: fwupd plugin using ModemManger
Requires: %{name}%{?_isa} = %{version}-%{release}
%description plugin-modem-manager
This provides the optional package which is only required on hardware that
might have mobile broadband hardware. It is probably not required on servers.
%endif
%if 0%{?have_flashrom}
%package plugin-flashrom
Summary: fwupd plugin using flashrom
Requires: %{name}%{?_isa} = %{version}-%{release}
%description plugin-flashrom
This provides the optional package which is only required on hardware that
can be flashed using flashrom. It is probably not required on servers.
%endif
%if 0%{?have_uefi}
%package plugin-uefi-capsule-data
Summary: Localized data for the UEFI UX capsule
Requires: %{name}%{?_isa} = %{version}-%{release}
%description plugin-uefi-capsule-data
This provides the pregenerated BMP artwork for the UX capsule, which allows the
"Installing firmware update…" localized text to be shown during a UEFI firmware
update operation. This subpackage is probably not required on embedded hardware
or server machines.
%endif
%prep
%autosetup -p1
%build
%meson \
-Ddocs=enabled \
%if 0%{?enable_tests}
-Dtests=true \
%else
-Dtests=false \
%endif
%if 0%{?enable_dummy}
-Dplugin_dummy=true \
%else
-Dplugin_dummy=false \
%endif
%if 0%{?have_flashrom}
-Dplugin_flashrom=enabled \
%else
-Dplugin_flashrom=disabled \
%endif
%if 0%{?have_msr}
-Dplugin_msr=enabled \
%else
-Dplugin_msr=disabled \
%endif
%if 0%{?have_gpio}
-Dplugin_gpio=enabled \
%else
-Dplugin_gpio=disabled \
%endif
%if 0%{?have_uefi}
-Dplugin_uefi_capsule=enabled \
-Dplugin_uefi_pk=enabled \
-Dplugin_tpm=enabled \
-Defi_binary=false \
%else
-Dplugin_uefi_capsule=disabled \
-Dplugin_uefi_pk=disabled \
-Dplugin_tpm=disabled \
%endif
%if 0%{?have_dell}
-Dplugin_dell=enabled \
%else
-Dplugin_dell=disabled \
%endif
%if 0%{?have_modem_manager}
-Dplugin_modem_manager=enabled \
%else
-Dplugin_modem_manager=disabled \
%endif
-Dman=true \
-Dbluez=enabled \
-Dplugin_powerd=disabled \
-Dgresource_quirks=disabled \
-Dsupported_build=enabled
%meson_build
%if 0%{?enable_tests}
%check
%meson_test
%endif
%install
%meson_install
mkdir -p --mode=0700 $RPM_BUILD_ROOT%{_localstatedir}/lib/fwupd/gnupg
# workaround for https://bugzilla.redhat.com/show_bug.cgi?id=1757948
mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/cache/fwupd
%find_lang %{name}
%post
%systemd_post fwupd.service
# change vendor-installed remotes to use the default keyring type
for fn in /etc/fwupd/remotes.d/*.conf; do
if grep -q "Keyring=gpg" "$fn"; then
sed -i 's/Keyring=gpg/#Keyring=pkcs/g' "$fn";
fi
done
%preun
%systemd_preun fwupd.service
%postun
%systemd_postun_with_restart fwupd.service
%files -f %{name}.lang
%doc README.md AUTHORS
%license COPYING
%config(noreplace)%{_sysconfdir}/fwupd/daemon.conf
%if 0%{?have_uefi}
%config(noreplace)%{_sysconfdir}/fwupd/uefi_capsule.conf
%endif
%config(noreplace)%{_sysconfdir}/fwupd/redfish.conf
%config(noreplace)%{_sysconfdir}/fwupd/thunderbolt.conf
%dir %{_libexecdir}/fwupd
%{_libexecdir}/fwupd/fwupd
%ifarch i686 x86_64
%{_libexecdir}/fwupd/fwupd-detect-cet
%endif
%{_libexecdir}/fwupd/fwupdoffline
%if 0%{?have_uefi}
%{_bindir}/fwupdate
%endif
%{_bindir}/dfu-tool
%if 0%{?have_uefi}
%{_bindir}/dbxtool
%endif
%{_bindir}/fwupdmgr
%{_bindir}/fwupdtool
%{_bindir}/fwupdagent
%dir %{_sysconfdir}/fwupd
%dir %{_sysconfdir}/fwupd/remotes.d
%if 0%{?have_dell}
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/dell-esrt.conf
%endif
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/lvfs.conf
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/lvfs-testing.conf
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/vendor.conf
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/vendor-directory.conf
%config(noreplace)%{_sysconfdir}/pki/fwupd
%{_sysconfdir}/pki/fwupd-metadata
%if 0%{?have_msr}
/usr/lib/modules-load.d/fwupd-msr.conf
%config(noreplace)%{_sysconfdir}/fwupd/msr.conf
%endif
%{_datadir}/dbus-1/system.d/org.freedesktop.fwupd.conf
%{_datadir}/bash-completion/completions/fwupdmgr
%{_datadir}/bash-completion/completions/fwupdtool
%{_datadir}/bash-completion/completions/fwupdagent
%{_datadir}/fish/vendor_completions.d/fwupdmgr.fish
%{_datadir}/fwupd/metainfo/org.freedesktop.fwupd*.metainfo.xml
%if 0%{?have_dell}
%{_datadir}/fwupd/remotes.d/dell-esrt/metadata.xml
%endif
%{_datadir}/fwupd/remotes.d/vendor/firmware/README.md
%{_datadir}/dbus-1/interfaces/org.freedesktop.fwupd.xml
%{_datadir}/polkit-1/actions/org.freedesktop.fwupd.policy
%{_datadir}/polkit-1/rules.d/org.freedesktop.fwupd.rules
%{_datadir}/dbus-1/system-services/org.freedesktop.fwupd.service
%{_mandir}/man1/fwupdtool.1*
%{_mandir}/man1/fwupdagent.1*
%{_mandir}/man1/dfu-tool.1*
%if 0%{?have_uefi}
%{_mandir}/man1/dbxtool.*
%endif
%{_mandir}/man1/fwupdmgr.1*
%if 0%{?have_uefi}
%{_mandir}/man1/fwupdate.1*
%endif
%{_datadir}/metainfo/org.freedesktop.fwupd.metainfo.xml
%{_datadir}/icons/hicolor/scalable/apps/org.freedesktop.fwupd.svg
%{_datadir}/fwupd/firmware_packager.py
%{_datadir}/fwupd/simple_client.py
%{_datadir}/fwupd/add_capsule_header.py
%{_datadir}/fwupd/install_dell_bios_exe.py
%{_unitdir}/fwupd-offline-update.service
%{_unitdir}/fwupd.service
%{_unitdir}/fwupd-refresh.service
%{_unitdir}/fwupd-refresh.timer
%{_presetdir}/fwupd-refresh.preset
%{_unitdir}/system-update.target.wants/
%dir %{_localstatedir}/lib/fwupd
%dir %{_localstatedir}/cache/fwupd
%dir %{_datadir}/fwupd/quirks.d
%{_datadir}/fwupd/quirks.d/*.quirk
%{_datadir}/doc/fwupd/builder/README.md
%if 0%{?have_uefi}
%{_sysconfdir}/grub.d/35_fwupd
%endif
%{_libdir}/libfwupd.so.2*
%{_libdir}/libfwupdplugin.so.%{fwupdplugin_version}*
%{_libdir}/girepository-1.0/Fwupd-2.0.typelib
%{_libdir}/girepository-1.0/FwupdPlugin-1.0.typelib
/usr/lib/udev/rules.d/*.rules
/usr/lib/systemd/system-shutdown/fwupd.shutdown
%dir %{_libdir}/fwupd-plugins-%{fwupdplugin_version}
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_acpi_facp.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_acpi_phat.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_amt.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_analogix.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_ata.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_bcm57xx.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_cfu.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_ccgx.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_ch341a.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_colorhug.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_corsair.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_cros_ec.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_cpu.so
%if 0%{?have_dell}
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_dell.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_dell_esrt.so
%endif
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_dell_dock.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_dfu.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_dfu_csr.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_ebitdo.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_elantp.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_elanfp.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_emmc.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_ep963x.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_fastboot.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_fresco_pd.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_genesys.so
%if 0%{?have_gpio}
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_gpio.so
%endif
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_hailuck.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_iommu.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_jabra.so
%if 0%{?have_uefi}
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_lenovo_thinklmi.so
%endif
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_linux_lockdown.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_linux_sleep.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_linux_swap.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_linux_tainted.so
%if 0%{?have_msr}
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_acpi_dmar.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_acpi_ivrs.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_msr.so
%endif
%if 0%{?have_pci_psp}
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_pci_psp.so
%endif
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_mtd.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_nitrokey.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_nordic_hid.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_nvme.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_optionrom.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_parade_lspcon.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_pci_bcr.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_pci_mei.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_pixart_rf.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_realtek_mst.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_redfish.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_rts54hid.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_rts54hub.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_scsi.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_steelseries.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_superio.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_synaptics_mst.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_synaptics_cape.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_synaptics_cxaudio.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_synaptics_prometheus.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_synaptics_rmi.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_system76_launch.so
%if 0%{?enable_dummy}
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_test.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_test_ble.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_invalid.so
%endif
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_thelio_io.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_thunderbolt.so
%if 0%{?have_uefi}
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_tpm.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_bios.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_uefi_capsule.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_uefi_dbx.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_uefi_pk.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_uefi_recovery.so
%endif
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_usi_dock.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_vbe.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_logind.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_logitech_bulkcontroller.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_logitech_hidpp.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_uf2.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_upower.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_vli.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_wacom_raw.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_wacom_usb.so
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_goodixmoc.so
%ghost %{_localstatedir}/lib/fwupd/gnupg
%if 0%{?have_modem_manager}
%files plugin-modem-manager
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_modem_manager.so
%endif
%if 0%{?have_flashrom}
%files plugin-flashrom
%{_libdir}/fwupd-plugins-%{fwupdplugin_version}/libfu_plugin_flashrom.so
%endif
%if 0%{?have_uefi}
%files plugin-uefi-capsule-data
%{_datadir}/fwupd/uefi-capsule-ux.tar.xz
%endif
%files devel
%{_datadir}/gir-1.0/Fwupd-2.0.gir
%{_datadir}/gir-1.0/FwupdPlugin-1.0.gir
%{_datadir}/doc/libfwupdplugin
%{_datadir}/doc/libfwupd
%{_datadir}/vala/vapi
%{_includedir}/fwupd-1
%{_libdir}/libfwupd*.so
%{_libdir}/pkgconfig/fwupd.pc
%{_libdir}/pkgconfig/fwupdplugin.pc
%files tests
%if 0%{?enable_tests}
%dir %{_datadir}/installed-tests/fwupd
%{_datadir}/installed-tests/fwupd/tests/*
%{_datadir}/installed-tests/fwupd/fwupd-tests.xml
%{_datadir}/installed-tests/fwupd/*.test
%{_datadir}/installed-tests/fwupd/*.cab
%{_datadir}/installed-tests/fwupd/*.sh
%if 0%{?have_uefi}
%{_datadir}/installed-tests/fwupd/efi
%endif
%{_datadir}/fwupd/device-tests/*.json
%{_libexecdir}/installed-tests/fwupd/*
%dir %{_sysconfdir}/fwupd/remotes.d
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/fwupd-tests.conf
%endif
%changelog
* Mon Jul 11 2022 Richard Hughes <richard@hughsie.com> 1.8.2-1
- New upstream release
- Allow front-end clients to read the percentage property
- Autoconnect the Redfish network device when rebooting the BMC
- Copy the instance ID strings when incorporating devices
- Do not generate a capsule header for the FMP GUID
- Fix a regression for devices using the Atmel FLIP Bootloader
- Show the get-details output when the device requirements fail
- Simply quirk matching for i2c devices to speed up daemon startup
- Use force-detach to bypass the DFU streaming check for camera devices
- Wait for the System76 launch device to re-enumerate if already unlocked
- And, many more devices supported
* Fri May 27 2022 Richard Hughes <richard@hughsie.com> 1.8.1-1
- New upstream release
- Accurately return the last-set status to client tools
- Add X-UsbReceiver as an update category with icon usb-receiver
- Allow clients to opt-in to showing updates with user-solvable problems
- Be more resilient when restarting the Redfish BMC
- Do not mark all Redfish updates as UPDATABLE
- Export the system and device battery levels on the D-Bus interface
- Fix a critical warning on failed modem update
- Fix regression when probing PS175 devices
- And, many more devices supported
* Thu Apr 28 2022 Richard Hughes <richard@hughsie.com> 1.8.0-1
- New upstream release
- Add coSWID and uSWID parsers to libfwupdplugin for initial SBoM support
- Add new HSI attributes for the AMD PSP and various other system protections
- Add support for Corsair Sabre RGB PRO and Slipstream USB receiver
- Add support for FlatFrog devices
- Add support for Genesys GL3521 and GL3590 hubs
- Add support for Google Servo Dock
- Add support for Logitech M550, M650 and K650
- Add support for more ELAN fingerprint readers
- Add support for more integrated Wacom panels
- Add support for more NovaCustom machines
- Add support for more StaLabs StarLite machines
- Add support for more Tuxedo laptops
- Add support for System76 launch_lite_1
- Add support for the Quectel EM05
- Add the runtime fwupd-efi version as a firmware requirement
- Allow Capsule-on-Disk to work in more cases
- Allow 'fwupdmgr install' to install a specified firmware version
- Check the update protocol exists when checking requirements
- Correctly probe USB-2 hubs with more than 7 ports
- Do not add the Windows compatibility ID to capsule devices
- Do not throw away the TPM eventlog when uploading to the LVFS
- Export the version_lowest_raw value correctly
- Fix several small memory leaks
- Mark the ME region device locked if it is read only
- Only show the CLI time remaining for predictable status phases
- Respect the NO_COLOR env variable
- Restart the BMC after installing BCM updates
- Show the device serial number and instance IDs by default
- Support dumping the MTD image to a firmware blob
- Use the correct icon automatically for more hardware
* Tue Apr 05 2022 Richard Hughes <richard@hughsie.com> 1.7.7-1
- New upstream release
- Add signed and unsigned payload metadata to more devices
- Allow overriding the detected machine type
- Allow quirking the flashrom flash size
- Do not add the backup BMC device as it shares the same GUIDs
- Do not allow the DBX update for broken firmware versions
- Don't export USB4 host controllers if they do not have unique GUIDs
- Fix the TPM eventlog replay for Intel TXT machines
- Never send the DeviceChanged signal with invalid data
- Return the correct error when there is no GPIO device to open
- Show the update message and update image in front end tools
- Support the new PENDING upower device states
* Fri Feb 25 2022 Richard Hughes <richard@hughsie.com> 1.7.6-1
- New upstream release
- Add a flag to indicate the device has a signed or unsigned payload
- Add a simple plugin to enumerate (but not update) SCSI hardware
- Allow assigning issues to devices for known high priority problems
- Do not run fwupd-refresh automatically in containers
- Do not show a warning if the TPM eventlog does not exist
- Do not show TSS2 warning messages by default
- Fix a critical warning when loading an empty TPM eventlog item
- Fix a logic error when adding the community warning in fwupdmgr
- Fix loading flashrom devices in coreboot mode
- Fix the error handling when updating USB4 retimers
- Modify the AT retry behavior to fix getting the firmware branch
- Parse the MTD firmware version using the defined GType
- Show the user when devices are not updatable due to inhibits
- Skip probing the Dell DA300 device to avoid a warning
- Try harder to convert to a version into a correct semver
- Use multiple checksums when there are no provided artifacts
* Mon Feb 07 2022 Richard Hughes <richard@hughsie.com> 1.7.5-1
- New upstream release
- Add a flag to indicate the firmware is not provided by the vendor
- Allow marking a device as End-of-Life by the OEM vendor
- Be more robust by retrying IPMI transactions on servers
- Change the expired Redfish password when required
- Fall back to the ARM Device Tree 'compatible' data when required
- Fix a ModemManager segfault on startup for some MBIM-QDU devices
- Fix a possible dell-dock segfault at startup
- Fix compiling with new versions of efivar
- Fix the Nordic bootloader type detection
- Fix USB4 retimer enumeration
- Show results when calling get-details if failing requirements
- Uninhibit the modem using ModemManager after upgrade
* Thu Jan 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.7.4-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
* Thu Jan 13 2022 Richard Hughes <richard@hughsie.com> 1.7.4-1
- New upstream release
- Add firmware branch support for ModemManager devices
- Allow fwupdtool to be run as the non-root user in more cases
- Assign the Logitech bulkcontroller update interface correctly
- Do not allow UEFI updates when the laptop lid is closed
- Do not autoload ipmi-si to avoid warning on non-server hardware
- Do not show a critical warning for a weird TPM event log
- Fix waiting for USB devices when using Windows
- Ignore non-PCI NVMe devices
- Show why more devices are not marked as updatable
* Mon Dec 13 2021 Richard Hughes <richard@hughsie.com> 1.7.3-1
- New upstream release
- Add a sync-bkc subcommand to ensure a known set of firmware versions
- Add support for most Nordic Semiconductor nRF Secure devices
- Add the CFI JEDEC instance ID if using the vendor-extended version
- Do not wait for a USB runtime if will-disappear is set
- Enable the MOTD integration when using pam_motd
- Fix DFU regression when merging the FuProgress work
- Fix VLI VL820Q7 detection to fix flashing of the Lenovo TBT3 dock
- Ignore a USB error for STM32 attach when the device goes away
- Make the plugin startup order deterministic
- Set Thunderbolt ports offline on host controller
- Wait for the System76 Launch device to come back from DFU mode
* Fri Nov 19 2021 Richard Hughes <richard@hughsie.com> 1.7.2-1
- New upstream release
- Add a new HSI check that PCR registers 0-7 are not empty
- Add support for exported MTD block devices
- Export the component release ID over DBus
- Fix a DFU crash if the attach failed due to a hardware fault
- Fix a Redfish crash when specifying a URL without a port
- Fix CLI downloads when using fwupdmgr --ipfs
- Inhibit thunderbolt devices to correctly use UPDATABLE_HIDDEN
- Remove support for the SoloKey and ChaosKey devices
- Set SSL_VERIFYHOST=0 when using Redfish to fix OpenBMC auth
- Skip UEFI devices that fail coldplug
- Speed up the daemon startup by ~40% by doing less at startup
* Sat Nov 06 2021 Adrian Reber <adrian@lisas.de> - 1.7.1-2
- Rebuilt for protobuf 3.19.0
* Mon Nov 01 2021 Richard Hughes <richard@hughsie.com> 1.7.1-1
- New upstream release
- Allow specifying 'fwupdmgr device-test foo --json' for unattended testing
- Show changes in HSI attributes when using 'fwupdmgr security'
- Show the user a warning if updating may affect full-disk-encryption
- Show translated firmware release notes when provided
- Support loading remotes from /var/lib/fwupd/remotes.d
- Fix a CCGX regression when loading firmware
- Fix a potential crash when dumping Parade devices
- Fix the CSME CVE detection for new generations
- Handle EPERM when running the self tests on systems with IPMI
- Mark as SUPPORTED even if on battery power
- Only save the HSI attributes to the database if different
- Raise the client timeout value from 25 seconds to fix Redfish startup
- Redirect the old HSI links to the correct place
- Set device time and timezone for logitech bulkcontroller devices
- Set the verfmt of the returned device when the daemon device is unset
* Mon Oct 25 2021 Adrian Reber <adrian@lisas.de> - 1.7.0-2
- Rebuilt for protobuf 3.18.1
* Wed Oct 06 2021 Richard Hughes <richard@hughsie.com> 1.7.0-1
- New upstream release
- Add more supported PixArt and StarBook coreboot devices
- Add support for Synaptics CAPE, Elan FP readers and Logitech Bolt hardware
- Allow adding GUIDs to each HSI security attribute
- Allow waiting for multiple devices to replug
- Create Redfish user accounts automatically using IPMI
- Make the SuperIO ports and timeouts specific to the DMI model
- Show HSiLevel=0 attributes in JSON security output
- Use a per-device global percentage completion
- Write the UX image upside down to fix some UEFI firmware
* Fri Sep 24 2021 Richard Hughes <richard@hughsie.com> 1.6.4-1
- New upstream release
- Abort on invalid SREC files early to avoid a fuzzing timeout
- Allow overriding the quirks directory at runtime
- Fix a regression in flashing the Dell dock
- Fix probing the Dell TPM
- Show HSiLevel=0 attributes in JSON security output
* Tue Aug 10 2021 Richard Hughes <richard@hughsie.com> 1.6.3-1
- New upstream release
- Disable the uefi_capsule plugin if Redfish coldplug succeeded
- Fix an elantp crash when starting the daemon
- Fix detection of 8Bitdo wireless usb adapter
- Fix writing large redfish firmware files
* Mon Aug 02 2021 Richard Hughes <richard@hughsie.com> 1.6.2-1
- New upstream release
- Add a plugin to check Lenovo firmware settings
- Add support for CapsuleOnDisk and installing UEFI updates from GRUB
- Automatically connect the BMC network interface at startup
- Disable all UX capsules for Lenovo hardware
- Do not assume the metainfo file is NUL-terminated
- Do not save invalid files on LVFS server error
- Fix a VLI regression when installing VL820Q7 firmware
- Fix enumeration of the Synaptics Prometheus config child
- Fix version number for legacy Wacom Bluetooth modules
- Show the user how to switch out of Wacom tablet Android-mode
- Work around a XCC-ism on Lenovo hardware
* Wed Jul 21 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.6.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
* Mon Jun 14 2021 Richard Hughes <richard@hughsie.com> 1.6.1-1
- New upstream release
- Add generic ModemManager support for PCI based modems
- Add initial support for USB4 module in the Dell dock
- Add support for sibling requirements
- Add support for the ACPI PHAT table
- Ask the user to confirm all CLI actions
- Do not prevent firmware updates on desktop hardware
- Do not show an invalid DFU warning on attach
- Fall back to binary files when flashing STM32 hardware
- Fix a critical warning when downloading files
- Fix a regression in updating the WD19TB dock
- Fix GUID generation on pixart hardware
- Fix the VLI i2c device enumeration, e.g. MSP430
- Follow HTTP 3XX redirects when downloading files
- Force the device locker to close() an aborted open()
- Only lock fwupdtool when loading the engine
- Read current Wacom firmware index before finding image to write
- Support binary artifact resources in cabinet archives
- Support mirroring the detach and update images
- Switch lock directory from /var/run to /run/lock
- Use GProxyResolver to get the system proxy setting for a given URL
* Wed Apr 28 2021 Richard Hughes <richard@hughsie.com> 1.6.0-1
- New upstream release
* Wed Apr 14 2021 Andrew Thurman <ajtbecool@gmail.com> 1.5.9-2
- Backport https://github.com/fwupd/fwupd/pull/3144 to fix https://bugzilla.redhat.com/show_bug.cgi?id=1949491
* Tue Apr 13 2021 Richard Hughes <richard@hughsie.com> 1.5.9-1
- New upstream release
- Avoid runtime warning in dfu-tool
- Detect address overflow when parsing invalid Intel HEX files
- Do not timeout when bluez fails to start
- Fix a crash when checking if the dbx update is safe to apply
- Fix a possible crash if the user set WacomI2cFlashBlockSize manually
- Fix array access when using fwupmgr verify-update
- Include crt0 for arm and aarch64 that add a SBAT section
- Retry the request to fix enumeration failure of Synaptics CXAudio
- Set device activation requirement correctly in all cases
- Set dual-bank property on more Lenovo display hardware
- Tweak the SBAT output for a vendor string
* Wed Mar 24 2021 Richard Hughes <richard@hughsie.com> 1.5.8-1
- New upstream release
- Add D501 Baklava device support
- Allow enabling plugins only matching a specific HwId
- Check pixart firmware compatibility with hardware before flashing
- Correct a thunderbolt assertion if kernel failed FW read
- Correctly erase STM32 devices when transfer size is less than sector size
- Detect SREC overflow to avoid adding ~4GB of 0xFF padding
- Do not show a critical error when flashing footer-less binary files
- Don't allow device updates while needing activation
- Fix a regression in the elantp defined IAP start address
- Fix a regression where activate stopped working
- Fix firmware update of pointing device on Lenovo ThinkPad Nano
- Fix the HSI plugin 'Disabled' state
- Fix the quirk key name for the Lenovo HDMI with power
- Fix writing to the GD32VF103 bootloader
- Only call elantp->detach() when writing a firmware blob
- Prompt for unlock keypress if reset command is blocked
- Remove the Hughski public key
- Show a warning when parsing invalid quirk files
- Support for GATT characteristic signals/notifications
- Support more than one protocol for a given device
- Updated StarLabs GUIDs
- Wait a few ms for the Logitech hardware to settle after detach
* Tue Mar 02 2021 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.5.7-2
- Rebuilt for updated systemd-rpm-macros
See https://pagure.io/fesco/issue/2583.
* Tue Feb 23 2021 Richard Hughes <richard@hughsie.com> 1.5.7-1
- New upstream release
- Add initial support for Bluez bluetooth devices
- Add more supported pixart devices
- Add support for the RTD21xx HDMI converter
- Convert MBR types to GPT GUIDs to help find the ESP
- Drop unused heap pages after startup has completed
- Ensure SBAT metadata is added correctly
- Only allow verify-update for plugins that support CAN_VERIFY
* Tue Feb 16 2021 Richard Hughes <richard@hughsie.com> 1.5.6-1
- New upstream release
- Add SBAT metadata to the fwupd EFI binary
- Add support for GD32VF103 as found in the Longan Nano
- Add support for RMI PS2 devices
- Add support for the Starlabs LabTop L4
- Add support for the System76 Keyboard
- Allow downloading firmware from IPFS
- Be more paranoid when parsing ASCII buffers and devices
- Check if the fwupd BootXXXX entry exists on failure
- Do not allow flashing using flashrom if BLE is enabled
- Do not allow Lenovo hardware to install multiple capsules
- Do not show Unknown [***] for every client connection
- Fix dnload wBlockNum wraparound for ST devices
- Fix OOM when using large ArchiveSizeMax values
- Fix several crashes spotted by AddressSanitizer
- Fix several places where the Goodix MOC plugin could crash
- Include the PCR0 to the report metadata
- Install the UX data into an optional subpacakge
- Report the lockdown status from UEFI and SuperIO plugins
- Show a console warning if the system clock is not set
* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.5.5-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
* Mon Jan 11 2021 Richard Hughes <richard@hughsie.com> 1.5.5-1
- New upstream release
- Add a plugin to update PixArt RF devices
- Add new hardware to use the elantp and rts54hid plugins
- Detect the AMD TSME encryption state for HSI-4
- Detect the AMI PK test key is not installed for HSI-1
- Fix flashing a fingerprint reader that is in use
- Fix several critical warnings when parsing invalid firmware
- Fix updating DFU devices that use DNLOAD_BUSY
- Ignore the legacy UEFI OVMF dummy GUID
- Make libfwupd more thread safe to fix a crash in gnome-software
- Never show unprintable chars from invalid firmware in the logs
* Wed Dec 16 2020 Richard Hughes <richard@hughsie.com> 1.5.4-1
- New upstream release
- Add Maple Ridge Thunderbolt firmware parsing support
- Allow creating FMAP and Synaptics firmware using builder.xml
- Allow using fwupdtool as non-root for firmware commands
- Do not trust the Block.HintSystem boolean for ESP filtering
- Fix a memory leak when parsing Synaptics firmware
- Fix a possible crash when reading the Goodix MOC USB request
- Fix possible crashes when parsing invalid firmware
* Tue Dec 08 2020 Richard Hughes <richard@hughsie.com> 1.5.3-1
- New upstream release
- Add a UEFI quirk for Star Labs Lite Mk III
- Add the device firmare ID for serio class hardware
- Allow setting the GMainContext when used for sync methods
- Allow the client to send legacy PKCS7 and GPG signatures
- Export the driver name from FuUdevDevice
- Fix a possible critical warning due to missing retval
- Fix the endianness for the CRC check in bcm57xx
- Make sure the correct interface number is used for QMI
- Mark more user-visible strings as translatable
- Restrict loading component types of firmware
- Validate ModemManager firmware update method combinations
* Mon Nov 23 2020 Richard Hughes <richard@hughsie.com> 1.5.2-1
- New upstream release
- Add a flag to indicate if packages are supported
- Add a plugin for the Pinebook Pro laptop
- Allow components to set the icon from the metadata
- Fall back to FAT32 internal partitions for detecting ESP
- Fix detection of ColorHug version on older firmware versions
- Fix reading BCM57XX vendor and device ids from firmware
- Fix replugging the MSP430 device
- Fix sync method when called from threads without a context
- Ignore an invalid vendor-id when adding releases for display
- Improve synaptics-mst reliability when writing data
- Install modules-load configs in the correct directory
- Notify the service manager when idle-quitting
- Only download the remote metadata as required
- Remove HSI update and attestation suffixes
- Restore recognizing GPG and PKCS7 signature types in libfwupd
- Set the SMBIOS chassis type to portable if a DT battery exists
- Switch from libsoup to libcurl for downloading data
* Fri Nov 20 2020 Adam Williamson <awilliam@redhat.com> - 1.5.1-2
- Backport #2605 for #2600, seems to help RHBZ #1896540
* Mon Nov 02 2020 Richard Hughes <richard@hughsie.com> 1.5.1-1
- New upstream release
- Delete unused EFI variables when deploying firmware
- Fix probe warning for the Logitech Unifying device
- Include the amount of NVRAM size in use in the LVFS failure report
- Make bcm57xx hotplug more reliable
- Recognize authorized thunderbolt value of 2
- Remove the duplicate parent-child data in FwupdDevice and FuDevice
- Show a less scary fwupdate output for devices without info
- Use a different Device ID for the OptionROM devices
- Use UDisks to find out if swap devices are encrypted
* Mon Oct 26 2020 Richard Hughes <richard@hughsie.com> 1.5.0-1
- New upstream release
- Add async versions of the library for GUI tools
- Add commands for interacting with the ESP to fwupdtool
- Add plugin for Goodix fingerprint sensors
- Add plugin that can update the BCM5719 network adapter
- Add plugin to update Elan Touchpads using HID
- Add support for ChromeOS Quiche and Gingerbread
- Add support for the Host Security ID
- Add support for ThunderBolt retimers
- Add switch-branch command to fwupdtool and fwupdmgr
- Allow blocking specific firmware releases by checksum
- Allow constructing a firmware with multiple images
- Allow firmware to require specific features from front-end clients
- Fix setting BootNext correctly when multiple updates are scheduled
- Fix the topology of the audio device on the Lenovo TR dock
- Include the HSI results and attributes in the uploaded report
- Make return code different for get-updates with no updates
- Make specific authorizations also imply others
- Parse the HEX version before comparing for equality
- Prevent dell-dock updates to occur via synaptics-mst plugin
- Record the UEFI failure in more cases
- Support loading DMI data from DT systems
- Support LVFS::UpdateImage for GUI clients
- Use pkttyagent to request user passwords if running without GUI
* Mon Sep 07 2020 Richard Hughes <richard@hughsie.com> 1.4.6-1
- New upstream release
- Add a re-implementation of the rhboot dbxtool
- Add missing Synaptics Prometheus GUIDs for ConfigId
- Add support for the LabTop Mk IV
- Add support for the Realtek RTD21XX I²C protocol
- Allow blocking specific firmware releases by checksum
- Allow DFU device to attach to runtime without a bus reset
- Allow plugins to set remove delay only on the child
- Cancel the file monitor before disposal to avoid a potential deadlock
- Correctly label the vebdor for more NVMe devices
- Specify a remove delay for Poly USB Cameras
- Support download of large DFU firmware
- Support polling the status from device in dfuManifest state
- Use newer libxmlb features to properly display more AppStream markup
* Tue Aug 18 2020 Richard Hughes <richard@hughsie.com> 1.4.5-4
- Rebuild for the libxmlb API bump.
* Mon Aug 03 2020 Peter Jones <pjones@redhat.com> - 1.4.5-3
- Make dual signing happen.
Related: CVE-2020-10713
* Sat Aug 01 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.4.5-2
- Second attempt - Rebuilt for
https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
* Thu Jul 30 2020 Richard Hughes <richard@hughsie.com> 1.4.5-1
- New upstream release
- Add dual-image feature for VL103 backup firmware
- Add more CCGX hybrid dock support
- Add support for a delayed activation flow for Thunderbolt
- Allow firmware to require specific features from front-end clients
- Be more defensive when remotes are missing required keys
- Check all AppStream components when verifying
- Check for free space after cleaning up ESP
- Fix TPM PCR0 calculation
- Modernize the thunderbolt plugin for future hardware
- Only show UpdateMessage when state is success
- Read the modem vendor ID correctly
- Set the runtime version to 0.0.0 for pre-1.0.0 Thelio Io firmware
- Support compiling libqmi-glib 1.26.0 and later
- Support LVFS::UpdateImage in GUI clients
- Use the GPIOB reset for the MiniDock VL103
- Wait for the root device to be replugged when updating the MSP430
* Mon Jul 27 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.4.4-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
* Wed Jun 10 2020 Richard Hughes <richard@hughsie.com> 1.4.4-1
- New upstream release
- Fix refreshing when checking for downgraded metadata
* Tue Jun 09 2020 Richard Hughes <richard@hughsie.com> 1.4.3-1
- New upstream release
- Add support for HP DMC dock devices
- Always enforce the metadata signature has a valid timestamp
- Capture the dock SKU in metadata
- Check the device requirements when returning from GetDetails
- Prevent Dell dock updates to occur via synaptics-mst plugin
* Fri May 22 2020 Richard Hughes <richard@hughsie.com> 1.4.2-2
- Backport a patch to fix the synaptics fingerprint reader update.
* Mon May 18 2020 Richard Hughes <richard@hughsie.com> 1.4.2-1
- New upstream release
- Add several more ATA OUI quirks
- Avoid communicating with DFU devices when bitManifestationTolerant is off
- Correct the display of final calculated PCRs
- Delay activation for Dell Thunderbolt updates
- Do not use synaptics-rmi on the Dell K12A
- Fix switching wacom-raw to bootloader mode
- Switch the default of EnumerateAllDevices to false
- Use GPIOB to reset the VL817 found in two Lenovo products
* Mon Apr 27 2020 Richard Hughes <richard@hughsie.com> 1.4.1-1
- New upstream release
- Allow specifying the device on the command line by GUID
- Correctly format firmware version of Dynabook X30 and X40
- Do not show safe mode errors for USB4 host controllers
- Do not show the USB 2 VLI recovery devices for USB 3 hubs
- Fix the correct DeviceID set by GetDetails
- Only update the FW2 partition of the ThinkPad USB-C Dock Gen2
- Prefer to update the child device first if the order is unspecified
- Refresh device name and format before setting supported flag
- Reset the progressbar time estimate if the percentage is invalid
- Set the CCGX device name and summary from quirk files
- Wait for the cxaudio device to reboot after writing firmware
* Tue Apr 14 2020 Richard Hughes <richard@hughsie.com> 1.4.0-1
- New upstream release
- Actually reload the DFU device after upgrade has completed
- Add plugin for CPU microcode
- Add plugin for Cypress CCGX hardware
- Add plugin for EP963x hardware
- Add STM32F745 DfuSe version quirk
- Allow server metadata to set the device name and version format
- Always check for 'PLAIN' when doing vercmp() operations
- Apply version format to releases and devices at same time
- Check the firmware requirements before adding 'SUPPORTED'
- Correctly attach VL103 after a firmware update
- Do not allow devices that have no vendor ID to be 'UPDATABLE'
- Do not use shim for non-secure boot configurations
- Export the device state, release creation time and urgency
- Fix a crash when removing device parents
- Fix a difficult-to-trigger daemon hang when replugging devices
- Fix a runtime error when detaching MSP430
- Fix CounterpartGuid when there is more than one supported device
- Fix reporting Synaptics cxaudio version number
- Introduce a new VersionFormat of 'hex'
- Load the signature to get the aliased CDN-safe version of the metadata
- Never add USB hub devices that are not upgradable
- Only auto-add counterpart GUIDs when required
- Parse the CSR firmware as a DFU file
- Set the protocol when updating logitech HID++ devices
- Use Jcat files in firmware archives and for metadata
- When TPM PCR0 measurements fail, query if secure boot is available and enabled
* Thu Mar 05 2020 Nicolas Mailhot <nim@fedoraproject.org> 1.3.9-2
- Rebuild against the new Gusb.
* Wed Mar 04 2020 Richard Hughes <richard@hughsie.com> 1.3.9-1
- New upstream release
- Added completion script for fish shell
- Always check for PLAIN when doing vercmp() operations
- Always return AppStream markup for remote agreements
- Apply UEFI capsule update even with single valid capsule
- Check the device protocol before de-duping devices
- Copy the version and format from donor device in get-details
- Correctly append the release to devices in `fwupdtool get-details`
- Decrease minimum battery requirement to 10%
- Discard the reason upgrades aren't available
- Do not fail loading in /etc/machine-id is not available
- Fix a critical warning when installing some firmware
- For the `get-details` command make sure to always show devices
- Inhibit all power management actions using logind when updating
- Set the MSP430 version format to pair
- Switch off the ATA verbose logging by default
- Use unknown for version format by default on get-details
* Thu Feb 13 2020 Richard Hughes <richard@hughsie.com> 1.3.8-1
- New upstream release
- Add an extra instance ID to disambiguate USB hubs
- Add a plugin to update PD controllers by Fresco Logic
- Correctly reset VL100 PD devices
- Do not rewrite BootOrder in the EFI helper
- Do not use vercmp when the device version format is plain
- Fix firmware regression in the EFI capsule helper
- Fix updating Synaptics MST devics with no PCI parent
- Ignore Unifying detach failures
- Make the cxaudio version match that of the existing Windows tools
- Replay the TPM event log to get the PCRx values
- Set up more parent devices for various Lenovo USB hubs
- Support the new gnuefi file locations
- Use the correct command to get the VLI device firmware version
* Fri Jan 31 2020 Richard Hughes <richard@hughsie.com> 1.3.7-1
- New upstream release
- Add 'get-remotes' and 'refresh' to fwupdtool
- Add support for standalone VIA PD devices
- Allow applying all releases to get to a target version
- Correctly delete UEFI variables
- Correctly import PKCS-7 remote metadata
- Discourage command line metadata refreshes more than once per day
- Do not always get the vendor ID for udev devices using the parent
- Get the list of updates in JSON format from fwupdagent
- Show the device parent if there is an interesting child
- Shut down automatically when there is system memory pressure
- Use a different protocol ID for VIA i2c devices
- Use the correct timeout for Logitech IO channel writes
* Tue Jan 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.6-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
* Mon Dec 30 2019 Richard Hughes <richard@hughsie.com> 1.3.6-1
- New upstream release
- Add a dell-bios version format to match what is shown on the vendor website
- Add a new plugin that exposes the TPM device
- Allow incremental version major and minor number for Synaptics Prometheus devices
- Clarify error messages when no upgrades are available
- Correct the default prompt for reboot/shutdown
- Do not expose bootloader version errors to users
- Enforce that device protocol matches the metadata value
- Export the device protocol and raw device version to the client --verbose output
- Fix the quirk for the legacy VIA 813 usbhub chip
- Only check the vendor ID if the device has one set
- Return exit status success if there is no firmware to be updated
- Set the correct vendor eMMC ID prefix
- Use the baseboard vendor as the superio vendor ID
- Use the BIOS vendor as the coreboot and flashrom vendor ID
* Fri Nov 29 2019 Richard Hughes <richard@hughsie.com> 1.3.5-1
- New upstream release
- Convert libfwupdprivate to a shared library libfwupdplugin
- Create a REV_00 instance ID as this may be what the vendor needs to target
- Improve coreboot version detection
- Invert default behavior to be safer for reboot and shutdown prompts
- Reload the Synaptics prometheus device version after update
- Use the correct unlocker when using GRWLock
- Whitelist VIA USB hub PD and I²C devices
* Fri Nov 22 2019 Richard Hughes <richard@hughsie.com> 1.3.4-1
- New upstream release
- Add support for Foxconn T77W968 and DW5821e eSIM
- Add support for matching firmware requirements on device parents
- Add support for writing VIA PD and I2C devices
- Add versions formats for the Microsoft Surface devices
- Correct Wacom panel HWID support
- Fix a fastboot regression when updating modem firmware
- Fix regression when coldplugging superio devices
- Fix the linking of the UEFI update binary
- Fix the vendor id of hidraw devices
- Make loading USB device strings non-fatal
- Reject invalid Synaptics MST chip IDs
- Skip cleanup after device is done updating if required
* Fri Nov 01 2019 Richard Hughes <richard@hughsie.com> 1.3.3-1
- New upstream release
- Add a plugin for systems running coreboot
- Add a plugin to update eMMC devices
- Add a plugin to update Synaptics RMI4 devices
- Add a plugin to update VIA USB hub hardware
- Add several quirks for Realtek webcams
- Add some success messages when CLI tasks have completed
- Add support for automatically uploading reports
- Add support for `fwupdmgr reinstall`
- Add support for the 8bitdo SN30Pro+
- Add support for the ThinkPad USB-C Dock Gen2 audio device
- Allow fwupdtool to dump details of common firmware formats
- Always report the update-error correctly for multiple updates
- Create a unique GUID for the Thunderbolt controller path
- Fix a regression for Wacom EMR devices
- Recognize new 'generation' Thunderbolt sysfs attribute for USB4
- Rework ESP path detection and lifecycle to auto-unmount when required
- Show a useful error for Logitech devices that cannot self-reset
- Use correct method for stopping systemd units
- Use device safety flags to show prompts before installing updates
- Use will-disappear flag for 8bitdo SF30/SN30 controllers
- Use XMLb to query quirks to reduce the RSS when running
* Tue Oct 08 2019 Richard Hughes <richard@hughsie.com> 1.3.2-2
- Manually create /var/cache/fwupd to work around #1757948
* Thu Sep 26 2019 Richard Hughes <richard@hughsie.com> 1.3.2-1
- New upstream release
- Add aliases for get-upgrades and upgrade
- Add support for Conexant audio devices
- Add support for the Minnowboard Turbot
- Add support for the SoloKey Secure
- Add support for the Thelio IO board
- Add support to integrate into the motd
- Allow disabling SSL strict mode for broken corporate proxies
- Allow filtering devices when using the command line tools
- Allow specifying a firmware GUID to check any version exists
- Be more accepting when trying to recover a failed database migration
- Display more helpful historical device information
- Do not ask the user to upload a report if ReportURI is not set
- Do not segfault when trying to quit the downgrade selection
- Ensure HID++ v2.0 peripheral devices get added
- Never show AppStream markup on the console
- Only write the new UEFI device path if different than before
- Partially rewrite the Synapticsmst plugin to support more hardware
- Print devices, remotes, releases using a tree
- Support issues in AppStream metadata
- Use tpm2-tss library to read PCR values
* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.10-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
* Mon Jul 15 2019 Richard Hughes <richard@hughsie.com> 1.2.10-1
- New upstream release
- Add a specific error code for the low battery case
- Add support for 8bitdo USB Retro Receiver
- Export new API to build objects from GVariant blobs
- Fix installing synaptics-prometheus config updates
- Prompt for reboot when unlocking on the command line if applicable
- Show a warning when running in UEFI legacy mode
- Show devices with an UpdateError in get-devices output
- Support a UEFI quirk to disable the use of the UX capsule
- Support empty proxy server strings
- Try harder to find duplicate UEFI boot entries
* Mon May 20 2019 Richard Hughes <richard@hughsie.com> 1.2.9-1
- New upstream release
- Add support for Synaptics Prometheus fingerprint readers
- Check the daemon version is at least the client version
- Correctly identify DFU firmware that starts at offset zero
- Display the remote warning on the console in an easy-to-read way
- Export the version-format used by devices to clients
- Fix a libasan failure when reading a UEFI variable
- Never guess the version format from the version string
- Only use class-based instance IDs for quirk matching
- Prompt the user to shutdown if required when installing by ID
- Reset the forced version during DFU attach and detach
- Set the version format for more device types
* Tue Apr 23 2019 Richard Hughes <richard@hughsie.com> 1.2.8-1
- New upstream release
- Allow the fwupdmgr tool to modify the daemon config
- Correctly parse DFU interfaces with extra vendor-specific data
- Do not report transient or invalid system failures
- Fix problems with the version format checking for some updates
* Wed Apr 17 2019 Richard Hughes <richard@hughsie.com> 1.2.7-3
- Revert a patch from upstream that was causing problems with Dell hardware
* Tue Apr 16 2019 Adam Williamson <awilliam@redhat.com> - 1.2.7-2
- Rebuild with Meson fix for #1699099
* Thu Apr 11 2019 Richard Hughes <richard@hughsie.com> 1.2.7-1
- New upstream release
- Add a component categories to express the firmware type
- Add support for 8BitDo M30
- Add support for the not-child extension from Logitech
- Blacklist the synapticsmst plugin when using amdgpu
- Correct ATA activation functionality to work for all vendors
- Implement QMI PDC active config selection for modems
- Make an error message clearer when there are no updates available
- Match the old or new version number when setting NEEDS_REBOOT
- More carefully check the output from tpm2_pcrlist
- Recreate the history database if migration failed
- Require AC power when updating Thunderbolt devices
- Require --force to install a release with a different version format
- Shut down the daemon if the on-disk binary is replaced
* Wed Mar 27 2019 Richard Hughes <richard@hughsie.com> 1.2.6-2
- Enable the ModemManager plugin
* Tue Mar 26 2019 Richard Hughes <richard@hughsie.com> 1.2.6-1
- New upstream release
- Add support for delayed activation of docks and ATA devices
- Add support for reading the SuperIO device checksum and writing to e-flash
- Add the fwupdagent binary for use in shell scripts
- Allow restricting firmware updates for enterprise use
- Allow running offline updates when in system-update.target
- Allow signing the fwupd report with a client certificate
- Ask to reboot after scheduling an offline firmware update
- Correctly check the new version for devices that replug
- Do not fail to start the daemon if tpm2_pcrlist hangs
- Do not fail when scheduling more than one update to be run offline
- Do not schedule an update on battery power if it requires AC power
- Include all device checksums in the LVFS report
- Rename the shimx64.efi binary for known broken firmware
- Upload the UPDATE_INFO entry for the UEFI UX capsule
- Use Plymouth when updating offline firmware
* Mon Feb 25 2019 Richard Hughes <richard@hughsie.com> 1.2.5-1
- New upstream release
- Allow a device to be updated using more than one plugin
- Call composite prepare and cleanup using fwupdtool
- Detect and special case Dell ATA hardware
- Fix flashing failure with latest Intuos Pro tablet
- Fix potential segfault when applying UEFI updates
- Fix unifying regression when recovering from failed flash
- Report the DeviceInstanceIDs from fwupdmgr when run as root
* Tue Feb 12 2019 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 1.2.4-2
- Remove obsolete scriptlets
* Fri Feb 01 2019 Richard Hughes <richard@hughsie.com> 1.2.4-1
- New upstream release
- Add a directory remote that generates metadata
- Add a plugin to update Wacom embedded EMR and AES panels
- Add a plugin to upgrade firmware on ATA-ATAPI hardware
- Add a quirk to use the legacy bootmgr description
- Add SuperIO IT89xx device support
- Add support for Dell dock passive flow
- Add the needs-shutdown quirk to Phison NVMe drives
- Add 'update' and 'get-updates' commands to fwupdtool
- Allow Dell dock flashing Thunderbolt over I2C
- Check the battery percentage before flashing
- Correct Nitrokey Storage invalid firmware version read
- Do not check the BGRT status before uploading a UX capsule
- Do the UEFI UX checksum calculation in fwupd
- Fix flashing various Jabra devices
- Fix the parser to support extended segment addresses
- Flash the fastboot partition after downloading the file
- Show a console warning if loading an out-of-tree plugin
- Show a per-release source and details URL
- Show a `UpdateMessage` and display it in tools
- Support FGUID to get the SKU GUID for NVMe hardware
* Thu Jan 31 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.3-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
* Fri Jan 04 2019 Richard Hughes <richard@hughsie.com> 1.2.3-1
- New upstream release
- Correctly migrate the history database
* Sun Dec 30 2018 Richard Hughes <richard@hughsie.com> 1.2.2-1
- New upstream release
- Add support for devices that support fastboot
- Add more standard USB identifier GUIDs
- Add the PCR0 value as the device checksum for system firmware
- Add Dell TB18DC to the supported devices list
- Allow replacing the last byte in the image when using 'dfu-tool replace-data'
- Append the UEFI capsule header in userspace rather than in the loader
- Check the device checksum as well as the content checksum during verify
- Correctly parse format the version numbers correctly using old metadata
- Fix a crash if AMT returns an empty response
- Fix a regression when doing GetReleases on unsupported hardware
- Remove the Wacom DTH generation hardware from the whitelist
- Sanitize the version if the version format has been specified
* Tue Nov 27 2018 Richard Hughes <richard@hughsie.com> 1.2.1-1
- New upstream release
- Add per-release install duration values
- Fix a use-after-free when using --immediate-exit
- Fix flashing the 8bitdo SF30
- Fix showing the custom remote agreements
- Include the os-release information in the release metadata
- Shut down the daemon after 2h of inactivity when possible
- Speed up startup by loading less thunderbolt firmware
- Speed up startup by using a silo index for GUID queries
- Use less memory and fragment the heap less when starting
* Wed Nov 07 2018 Richard Hughes <richard@hughsie.com> 1.2.0-1
- New upstream release
- Add a standalone installer creation script
- Add version format quirks for several Lenovo machines
- Adjust synapticsmst EVB board handling
- Allow setting the version format from a quirk entry
- Port from libappstream-glib to libxmlb for a large reduction in RSS
- Set the full AMT device version including the BuildNum
- Sort the firmware sack by component priority
- Stop any running daemon over dbus when using fu-tool
- Support the Intel ME version format
- Use HTTPS_PROXY if set
* Fri Oct 12 2018 Richard Hughes <richard@hughsie.com> 1.1.3-1
- New upstream release
- Add a plugin for an upcoming Dell USB-C dock
- Add support for devices to show an estimated flash time
- Add support for Realtek USB devices using vendor HID and HUB commands
- Adjust panamera ESM update routine for some reported issues
- Allow firmware files to depend on versions from other devices
- Check the amount of free space on the ESP before upgrading
- Don't show devices pending a reboot in GetUpgrades
- Fix possible crash in the thunderbolt-power plugin
- Make various parts of the daemon thread-safe
- Redirect all debugging output to stderr instead of stdout
- Run the Dell plugin initialization after the UEFI plugin
- Update all sub-devices for a composite update
* Mon Sep 10 2018 Richard Hughes <richard@hughsie.com> 1.1.2-1
- New upstream release
- Add a new plugin to enumerate EC firmware
- Add a new plugin to update NVMe hardware
- Allow updating just one specific device from the command line
- Always use the same HardwareIDs as Windows
- Download firmware if the user specifies a URI
- Implement the systemd recommendations for offline updates
- Improve performance when reading keys from the quirk database
- Rewrite the unifying plugin to use the new daemon-provided functionality
- Show a time estimate on the progressbar after an update has started
* Mon Aug 13 2018 Richard Hughes <richard@hughsie.com> 1.1.1-1
- New upstream release
- Add support for the Synaptics Panamera hardware
- Add validation for Alpine and Titan Ridge
- Allow flashing unifying devices in recovery mode
- Allow running synapticsmst on non-Dell hardware
- Check the ESP for sanity at at startup
- Do not hold hidraw devices open forever
- Fix a potential segfault in smbios data parsing
- Fix encoding the GUID into the capsule EFI variable
- Fix various bugs when reading the thunderbolt version number
- Improve the Redfish plugin to actually work with real hardware
- Reboot synapticsmst devices at the end of flash cycle
- Show the correct title when updating devices
* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.1.0-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Thu Jul 12 2018 Richard Hughes <richard@hughsie.com> 1.1.0-2
- Rebuild to get the EFI executable signed with the Red Hat key
* Wed Jul 11 2018 Richard Hughes <richard@hughsie.com> 1.1.0-1
- New upstream release
- Add a initial Redfish support
- Allow devices to assign a plugin from the quirk subsystem
- Detect the EFI system partition location at runtime
- Do not use 8bitdo bootloader commands after a successful flash
- Fix a potential buffer overflow when applying a DFU patch
- Fix downgrading older releases to devices
- Fix flashing devices that require a manual replug
- Fix unifying failure to detach when using a slow host controller
- Merge fwupdate functionality into fwupd
- Support more Wacom tablets
* Thu Jun 07 2018 Richard Hughes <richard@hughsie.com> 1.0.8-1
- New upstream release
- Adjust all licensing to be 100% LGPL 2.1+
- Add a firmware diagnostic tool called fwupdtool
- Add an plugin to update some future Wacom tablets
- Add support for Motorola S-record files
- Add the Linux Foundation public GPG keys for firmware and metadata
- Allow installing more than one firmware using 'fwupdmgr install'
- Allow specifying hwids with OR relationships
- Fix a potential DoS in libdfu by limiting holes to 1MiB
- Fix Hardware-ID{0,1,2,12} compatibility with Microsoft
- Hide devices that aren't updatable by default in fwupdmgr
- Stop matching Nintendo Switch Pro in the 8bitdo plugin
* Mon Apr 30 2018 Richard Hughes <richard@hughsie.com> 1.0.7-1
- New upstream release
- Add enable-remote and disable-remote commands to fwupdmgr
- Allow requiring specific versions of libraries for firmware updates
- Don't recoldplug thunderbolt to fix a flashing failure
- Fix SQL error when running 'fwupdmgr clear-offline'
- Only enumerate Dell Docks if the type is known
- Reboot after scheduling using logind not systemd
- Show a warning with interactive prompt when enabling a remote
* Mon Mar 12 2018 Richard Hughes <richard@hughsie.com> 1.0.6-1
- New upstream release
- Add bash completion for fwupdmgr
- Add support for newest Thunderbolt chips
- Allow devices to use the runtime version when in bootloader mode
- Allow overriding ESP mount point via conf file
- Correct handling of unknown Thunderbolt devices
- Correctly detect new remotes that are manually copied
- Delete any old fwupdate capsules and efivars when launching fwupd
- Fix a crash related to when passing device to downgrade in CLI
- Fix Unifying signature writing and parsing for Texas bootloader
- Generate Vala bindings
* Fri Feb 23 2018 Richard Hughes <richard@hughsie.com> 1.0.5-2
- Use the new CDN for metadata.
* Wed Feb 14 2018 Richard Hughes <richard@hughsie.com> 1.0.5-1
- New upstream release
- Be more careful deleting and modifying device history
- Fix crasher with MST flashing
- Fix DFU detach with newer releases of libusb
- Offer to reboot when processing an offline update
- Show the user a URL when they report a known problem
- Stop matching 8bitdo DS4 controller VID/PID
- Support split cabinet archives as produced by Windows Update
* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.4-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
* Thu Jan 25 2018 Richard Hughes <richard@hughsie.com> 1.0.4-1
- New upstream release
- Add a device name for locked UEFI devices
- Add D-Bus methods to get and modify the history information
- Allow the user to share firmware update success or failure
- Ask the user to refresh metadata when it is very old
- Never add two devices to the daemon with the same ID
- Rescan supported flags when refreshing metadata
- Store firmware update success and failure to a local database
* Fri Jan 12 2018 Richard Hughes <richard@hughsie.com> 1.0.3-2
- Backport a patch that fixes applying firmware updates using gnome-software.
* Tue Jan 09 2018 Richard Hughes <richard@hughsie.com> 1.0.3-1
- New upstream release
- Add a new plugin to add support for CSR "Driverless DFU"
- Add initial SF30/SN30 Pro support
- Block owned Dell TPM updates
- Choose the correct component from provides matches using requirements
- Do not try to parse huge compressed archive files
- Handle Thunderbolt "native" mode
- Use the new functionality in libgcab >= 1.0 to avoid writing temp files
* Tue Nov 28 2017 Richard Hughes <richard@hughsie.com> 1.0.2-1
- New upstream release
- Add a plugin for the Nitrokey Storage device
- Add quirk for AT32UC3B1256 as used in the RubberDucky
- Add support for the original AVR DFU protocol
- Allow different plugins to claim the same device
- Disable the dell plugin if libsmbios fails
- Fix critical warning when more than one remote fails to load
- Ignore useless Thunderbolt device types
- Set environment variables to allow easy per-plugin debugging
- Show a nicer error message if the requirement fails
- Sort the output of GetUpgrades correctly
- Use a SHA1 hash for the internal DeviceID
* Thu Nov 09 2017 Kalev Lember <klember@redhat.com> 1.0.1-3
- Rebuild against libappstream-glib 0.7.4
* Thu Nov 09 2017 Kalev Lember <klember@redhat.com> 1.0.1-2
- Fix libdfu obsoletes versions
* Thu Nov 09 2017 Richard Hughes <richard@hughsie.com> 1.0.1-1
- New upstream release
- Add support for HWID requirements
- Add support for programming various AVR32 and XMEGA parts using DFU
- Add the various DFU quirks for the Jabra Speak devices
- Catch invalid Dell dock component requests
- Correctly output Intel HEX files with > 16bit offset addresses
- Do not try to verify the element write if upload is unsupported
- Fix a double-unref when updating any 8Bitdo device
- Fix uploading large firmware files over DFU
- Format the BCD USB revision numbers correctly
- Guess the DFU transfer size if it is not specified
- Include the reset timeout as wValue to fix some DFU bootloaders
- Move the database of supported devices out into runtime loaded files
- Support devices with truncated DFU interface data
- Use the correct wDetachTimeOut when writing DFU firmware
- Verify devices with legacy VIDs are actually 8Bitdo controllers
* Mon Oct 09 2017 Richard Hughes <richard@hughsie.com> 1.0.0-1
- New upstream release
- This release breaks API and ABI to remove deprecated symbols
- libdfu is now not installed as a shared library
- Add FuDeviceLocker to simplify device open/close lifecycles
- Add functionality to blacklist Dell HW with problems
- Disable the fallback USB plugin
- Do not fail to load the daemon if cached metadata is invalid
- Do not use system-specific infomation for UEFI PCI devices
- Fix various printing issues with the progressbar
- Never fallback to an offline update from client code
- Only set the Dell coldplug delay when we know we need it
- Parse the SMBIOS v2 and v3 DMI tables directly
- Support uploading the UEFI firmware splash image
- Use the intel-wmi-thunderbolt kernel module to force power
* Fri Sep 01 2017 Richard Hughes <richard@hughsie.com> 0.9.7-1
- New upstream release
- Add a FirmwareBaseURI parameter to the remote config
- Add a firmware builder that uses bubblewrap
- Add a python script to create fwupd compatible cab files from .exe files
- Add a thunderbolt plugin for new kernel interface
- Fix an incomplete cipher when using XTEA on data not in 4 byte chunks
- Show a bouncing progress bar if the percentage remains at zero
- Use the new bootloader PIDs for Unifying pico receivers
* Fri Sep 01 2017 Kalev Lember <klember@redhat.com> 0.9.6-2
- Disable i686 UEFI support now that fwupdate is no longer available there
- Enable aarch64 UEFI support now that all the deps are available there
* Thu Aug 03 2017 Richard Hughes <richard@hughsie.com> 0.9.6-1
- New upstream release
- Add --version option to fwupdmgr
- Display all errors recorded by efi_error tracing
- Don't log a warning when an unknown unifying report is parsed
- Fix a hang on 32 bit machines
- Make sure the unifying percentage completion goes from 0% to 100%
- Support embedded devices with local firmware metadata
- Use new GUsb functionality to fix flashing Unifying devices
* Wed Aug 02 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.9.5-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.9.5-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
* Tue Jul 04 2017 Richard Hughes <richard@hughsie.com> 0.9.5-1
- New upstream release
- Add a plugin to get the version of the AMT ME interface
- Allow flashing Unifying devices in bootloader modes
- Filter by Unifying SwId when making HID++2.0 requests
- Fix downgrades when version_lowest is set
- Fix the self tests when running on PPC64 big endian
- Use the UFY DeviceID prefix for Unifying devices
* Thu Jun 15 2017 Richard Hughes <richard@hughsie.com> 0.9.4-1
- New upstream release
- Add installed tests that use the daemon
- Add the ability to restrict firmware to specific vendors
- Compile with newer versions of meson
- Fix a common crash when refreshing metadata
- Generate a images for status messages during system firmware update
- Show progress download when refreshing metadata
- Use the correct type signature in the D-Bus introspection file
* Wed Jun 07 2017 Richard Hughes <richard@hughsie.com> 0.9.3-1
- New upstream release
- Add a 'downgrade' command to fwupdmgr
- Add a 'get-releases' command to fwupdmgr
- Add support for Microsoft HardwareIDs
- Allow downloading metadata from more than just the LVFS
- Allow multiple checksums on devices and releases
- Correctly open Unifying devices with original factory firmware
- Do not expect a Unifying reply when issuing a REBOOT command
- Do not re-download firmware that exists in the cache
- Fix a problem when testing for a Dell system
- Fix flashing new firmware to 8bitdo controllers
* Tue May 23 2017 Richard Hughes <richard@hughsie.com> 0.9.2-2
- Backport several fixes for updating Unifying devices
* Mon May 22 2017 Richard Hughes <richard@hughsie.com> 0.9.2-1
- New upstream release
- Add support for Unifying DFU features
- Do not spew a critial warning when parsing an invalid URI
- Ensure steelseries device is closed if it returns an invalid packet
- Ignore spaces in the Unifying version prefix
* Thu Apr 20 2017 Richard Hughes <richard@hughsie.com> 0.8.2-1
- New upstream release
- Add a config option to allow runtime disabling plugins by name
- Add DFU quirk for OpenPICC and SIMtrace
- Create directories in /var/cache as required
- Fix the Requires lines in the dfu pkg-config file
- Only try to mkdir the localstatedir if we have the right permissions
- Support proxy servers in fwupdmgr
* Thu Mar 23 2017 Bastien Nocera <bnocera@redhat.com> - 0.8.1-2
+ fwupd-0.8.1-2
- Release claimed devices on error, fixes unusable input devices
* Mon Feb 27 2017 Richard Hughes <richard@hughsie.com> 0.8.1-1
- New upstream release
- Adjust systemd confinement restrictions
- Don't initialize libsmbios on unsupported systems
- Fix a crash when enumerating devices
* Wed Feb 08 2017 Richard Hughes <richard@hughsie.com> 0.8.0-1
- New upstream release
- Add support for Intel Thunderbolt devices
- Add support for Logitech Unifying devices
- Add support for Synaptics MST cascades hubs
- Add support for the Altus-Metrum ChaosKey device
- Always close USB devices before error returns
- Return the pending UEFI update when not on AC power
- Use a heuristic for the start address if the firmware has no DfuSe footer
- Use more restrictive settings when running under systemd
* Sat Dec 10 2016 Igor Gnatenko <i.gnatenko.brain@gmail.com> - 0.7.5-2
- Rebuild for gpgme 1.18
* Wed Oct 19 2016 Richard Hughes <richard@hughsie.com> 0.7.5-1
- New upstream release
- Add quirks for HydraBus as it does not have a DFU runtime
- Don't create the UEFI dummy device if the unlock will happen on next boot
- Fix an assert when unlocking the dummy ESRT device
- Fix writing firmware to devices using the ST reference bootloader
- Match the Dell TB16 device
* Mon Sep 19 2016 Richard Hughes <richard@hughsie.com> 0.7.4-1
- New upstream release
- Add a fallback for older appstream-glib releases
- Allow the argument to 'dfu-tool set-release' be major.minor
- Fix a possible crash when uploading firmware files using libdfu
- Fix libfwupd self tests when a host-provided fwupd is not available
- Load the Altos USB descriptor from ELF files
- Show the human-readable version in the 'dfu-tool dump' output
- Support writing the IHEX symbol table
- Write the ELF files with the correct section type
* Mon Aug 29 2016 Kalev Lember <klember@redhat.com> 0.7.3-2
- Fix an unexpanded macro in the spec file
- Tighten libebitdo-devel requires with the _isa macro
- Add ldconfig scripts for libdfu and libebitdo subpackages
* Mon Aug 29 2016 Richard Hughes <richard@hughsie.com> 0.7.3-1
- New upstream release
- Add Dell TPM and TB15/WD15 support via new Dell provider
- Add initial ELF reading and writing support to libdfu
- Add support for installing multiple devices from a CAB file
- Allow providers to export percentage completion
- Don't fail while checking versions or locked state
- Show a progress notification when installing firmware
- Show the vendor flashing instructions when installing
- Use a private gnupg key store
- Use the correct firmware when installing a composite device
* Fri Aug 19 2016 Peter Jones <pjones@redhat.com> - 0.7.2-6
- Rebuild to get libfwup.so.1 as our fwupdate dep. This should make this the
last time we need to rebuild for this.
* Wed Aug 17 2016 Peter Jones <pjones@redhat.com> - 0.7.2-5
- rebuild against new efivar and fwupdate
* Fri Aug 12 2016 Adam Williamson <awilliam@redhat.com> - 0.7.2-4
- rebuild against new efivar and fwupdate
* Thu Aug 11 2016 Richard Hughes <richard@hughsie.com> 0.7.2-3
- Use the new CDN for firmware metadata
* Thu Jul 14 2016 Kalev Lember <klember@redhat.com> - 0.7.2-2
- Tighten subpackage dependencies
* Mon Jun 13 2016 Richard Hughes <richard@hughsie.com> 0.7.2-1
- New upstream release
- Allow devices to have multiple assigned GUIDs
- Allow metainfo files to match only specific revisions of devices
- Only claim the DFU interface when required
- Only return updatable devices from GetDevices()
- Show the DFU protocol version in 'dfu-tool list'
* Fri May 13 2016 Richard Hughes <richard@hughsie.com> 0.7.1-1
- New upstream release
- Add device-added, device-removed and device-changed signals
- Add for a new device field "Flashes Left"
- Fix a critical warning when restarting the daemon
- Fix BE issues when reading and writing DFU files
- Make the device display name nicer
- Match the AppStream metadata after a device has been added
- Return all update descriptions newer than the installed version
- Set the device description when parsing local firmware files
* Fri Apr 01 2016 Richard Hughes <richard@hughsie.com> 0.7.0-1
- New upstream release
- Add Alienware to the version quirk table
- Add a version plugin for SteelSeries hardware
- Do not return updates that require AC when on battery
- Return the device flags when getting firmware details
* Mon Mar 14 2016 Richard Hughes <richard@hughsie.com> 0.6.3-1
- New upstream release
- Add an unlock method for devices
- Add ESRT enable method into UEFI provider
- Correct the BCD version number for DFU 1.1
- Ignore the DFU runtime on the DW1820A
- Only read PCI OptionROM firmware when devices are manually unlocked
- Require AC power before scheduling some types of firmware update
* Fri Feb 12 2016 Richard Hughes <richard@hughsie.com> 0.6.2-1
- New upstream release
- Add 'Created' and 'Modified' properties on managed devices
- Fix get-results for UEFI provider
- Support vendor-specific UEFI version encodings
* Wed Feb 03 2016 Fedora Release Engineering <releng@fedoraproject.org> - 0.6.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
* Tue Jan 19 2016 Richard Hughes <richard@hughsie.com> 0.6.1-1
- New upstream release
- Do not misdetect different ColorHug devices
- Only dump the profiling data when run with --verbose
* Mon Dec 07 2015 Richard Hughes <richard@hughsie.com> 0.6.0-1
- New upstream release
- Add support for automatically updating USB DFU-capable devices
- Emit the changed signal after doing an update
- Export the AppStream ID when returning device results
- Use the same device identification string format as Microsoft
* Wed Nov 18 2015 Richard Hughes <richard@hughsie.com> 0.5.4-1
- New upstream release
- Use API available in fwupdate 0.5 to avoid writing temp files
- Fix compile error against fwupdate 0.5 due to API bump
* Thu Nov 05 2015 Richard Hughes <richard@hughsie.com> 0.5.3-1
- New upstream release
- Avoid seeking when reading the file magic during refresh
- Do not assume that the compressed XML data will be NUL terminated
- Use the correct user agent string for fwupdmgr
* Wed Oct 28 2015 Richard Hughes <richard@hughsie.com> 0.5.2-1
- New upstream release
- Add the update description to the GetDetails results
- Clear the in-memory firmware store only after parsing a valid XML file
- Ensure D-Bus remote errors are registered at fwupdmgr startup
- Fix verify-update to produce components with the correct provide values
- Show the dotted-decimal representation of the UEFI version number
- Support cabinet archives files with more than one firmware
* Mon Sep 21 2015 Richard Hughes <richard@hughsie.com> 0.5.1-1
- Update to 0.5.1 to fix a bug in the offline updater
* Tue Sep 15 2015 Richard Hughes <richard@hughsie.com> 0.5.0-1
- New upstream release
- Do not reboot if racing with the PackageKit offline update mechanism
* Thu Sep 10 2015 Richard Hughes <richard@hughsie.com> 0.1.6-3
- Do not merge the existing firmware metadata with the submitted files
* Thu Sep 10 2015 Kalev Lember <klember@redhat.com> 0.1.6-2
- Own system-update.target.wants directory
- Make fwupd-sign obsoletes versioned
* Thu Sep 10 2015 Richard Hughes <richard@hughsie.com> 0.1.6-1
- New upstream release
- Add application metadata when getting the updates list
- Remove fwsignd, we have the LVFS now
* Fri Aug 21 2015 Kalev Lember <klember@redhat.com> 0.1.5-3
- Disable fwupd offline update service
* Wed Aug 19 2015 Richard Hughes <richard@hughsie.com> 0.1.5-2
- Use the non-beta download URL prefix
* Wed Aug 12 2015 Richard Hughes <richard@hughsie.com> 0.1.5-1
- New upstream release
- Add a Raspberry Pi firmware provider
- Fix validation of written firmware
- Make parsing the option ROM runtime optional
- Use the AppStream 0.9 firmware specification by default
* Sat Jul 25 2015 Richard Hughes <richard@hughsie.com> 0.1.4-1
- New upstream release
- Actually parse the complete PCI option ROM
- Add a 'fwupdmgr update' command to update all devices to latest versions
- Add a simple signing server that operates on .cab files
- Add a 'verify' command that verifies the cryptographic hash of device firmware
* Wed Jun 17 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.1.3-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
* Wed Jun 03 2015 Richard Hughes <richard@hughsie.com> 0.1.3-2
- Compile with libfwupdate for UEFI firmware support.
* Thu May 28 2015 Richard Hughes <richard@hughsie.com> 0.1.3-1
- New upstream release
- Coldplug the devices before acquiring the well known name
- Run the offline actions using systemd when required
- Support OpenHardware devices using the fwupd vendor extensions
* Wed Apr 22 2015 Richard Hughes <richard@hughsie.com> 0.1.2-1
- New upstream release
- Only allow signed firmware to be upgraded without a password
* Mon Mar 23 2015 Richard Hughes <richard@hughsie.com> 0.1.1-1
- New upstream release
- Add a 'get-updates' command to fwupdmgr
- Add and document the offline-update lifecycle
- Create a libfwupd shared library
- Create runtime directories if they do not exist
- Do not crash when there are no devices to return
* Mon Mar 16 2015 Richard Hughes <richard@hughsie.com> 0.1.0-1
- First release