commit 50e64da58e648ff8708935add5b2a87b4e590edf
Author: Yao Qi <yao.qi@linaro.org>
Date: Tue Jul 25 10:15:25 2017 +0100
[ARM] Access FPSCR on vfpv2
GDB can fetch or store FPSCR on vfpv3, which has 32 VFP registers, but
fail to do so on vfpv2, which has 16 VFP registers. GDB code is incorrect
for vfpv2,
else if (tdep->vfp_register_count > 0
&& regno >= ARM_D0_REGNUM
&& regno <= ARM_D0_REGNUM + tdep->vfp_register_count)
while FPSCR register number is defined as ARM_D0_REGNUM + 32.
ARM_D0_REGNUM, /* VFP double-precision registers. */
ARM_D31_REGNUM = ARM_D0_REGNUM + 31,
ARM_FPSCR_REGNUM,
The code above uses "<=" rather than "<", in order to put FPSCR in the
range, but it is only correct when tdep->vfp_register_count is 32. On
vpfv2, it is 16, and FPSCR is out of the range, so fetch_vfp_regs or
store_vfp_regs are not called.
gdb:
2017-07-25 Yao Qi <yao.qi@linaro.org>
PR tdep/21717
* arm-linux-nat.c (arm_linux_fetch_inferior_registers): Update
condition for FPSCR.
(arm_linux_store_inferior_registers): Likewise.
### a/gdb/ChangeLog
### b/gdb/ChangeLog
## -1,3 +1,10 @@
+2017-07-25 Yao Qi <yao.qi@linaro.org>
+
+ PR tdep/21717
+ * arm-linux-nat.c (arm_linux_fetch_inferior_registers): Update
+ condition for FPSCR.
+ (arm_linux_store_inferior_registers): Likewise.
+
2017-06-04 Joel Brobecker <brobecker@adacore.com>
* version.in: Set GDB version number to 8.0.0.DATE-git.
--- a/gdb/arm-linux-nat.c
+++ b/gdb/arm-linux-nat.c
@@ -402,7 +402,8 @@ arm_linux_fetch_inferior_registers (struct target_ops *ops,
fetch_wmmx_regs (regcache);
else if (tdep->vfp_register_count > 0
&& regno >= ARM_D0_REGNUM
- && regno <= ARM_D0_REGNUM + tdep->vfp_register_count)
+ && (regno < ARM_D0_REGNUM + tdep->vfp_register_count
+ || regno == ARM_FPSCR_REGNUM))
fetch_vfp_regs (regcache);
}
}
@@ -439,7 +440,8 @@ arm_linux_store_inferior_registers (struct target_ops *ops,
store_wmmx_regs (regcache);
else if (tdep->vfp_register_count > 0
&& regno >= ARM_D0_REGNUM
- && regno <= ARM_D0_REGNUM + tdep->vfp_register_count)
+ && (regno < ARM_D0_REGNUM + tdep->vfp_register_count
+ || regno == ARM_FPSCR_REGNUM))
store_vfp_regs (regcache);
}
}
commit cd33a03d183a268b83ccbcae07f3788308e8d9f4
Author: Yao Qi <yao.qi@linaro.org>
Date: Tue Jul 25 11:38:50 2017 +0100
Catch exceptions thrown from gdbarch_skip_prologue
PR 21555 is caused by the exception during the prologue analysis when re-set
a breakpoint.
(gdb) bt
#0 memory_error_message (err=TARGET_XFER_E_IO, gdbarch=0x153db50, memaddr=93824992233232) at ../../binutils-gdb/gdb/corefile.c:192
#1 0x00000000005718ed in memory_error (err=TARGET_XFER_E_IO, memaddr=memaddr@entry=93824992233232) at ../../binutils-gdb/gdb/corefile.c:220
#2 0x00000000005719d6 in read_memory_object (object=object@entry=TARGET_OBJECT_CODE_MEMORY, memaddr=93824992233232, memaddr@entry=1, myaddr=myaddr@entry=0x7fffffffd0a0 "P\333S\001", len=len@entry=1) at ../../binutils-gdb/gdb/corefile.c:259
#3 0x0000000000571c6e in read_code (len=1, myaddr=0x7fffffffd0a0 "P\333S\001", memaddr=<optimized out>) at ../../binutils-gdb/gdb/corefile.c:287
#4 read_code_unsigned_integer (memaddr=memaddr@entry=93824992233232, len=len@entry=1, byte_order=byte_order@entry=BFD_ENDIAN_LITTLE) at ../../binutils-gdb/gdb/corefile.c:362
#5 0x000000000041d4a0 in amd64_analyze_prologue (gdbarch=gdbarch@entry=0x153db50, pc=pc@entry=93824992233232, current_pc=current_pc@entry=18446744073709551615, cache=cache@entry=0x7fffffffd1e0) at ../../binutils-gdb/gdb/amd64-tdep.c:2310
#6 0x000000000041e404 in amd64_skip_prologue (gdbarch=0x153db50, start_pc=93824992233232) at ../../binutils-gdb/gdb/amd64-tdep.c:2459
#7 0x000000000067bfb0 in skip_prologue_sal (sal=sal@entry=0x7fffffffd4e0) at ../../binutils-gdb/gdb/symtab.c:3628
#8 0x000000000067c4d8 in find_function_start_sal (sym=sym@entry=0x1549960, funfirstline=1) at ../../binutils-gdb/gdb/symtab.c:3501
#9 0x000000000060999d in symbol_to_sal (result=result@entry=0x7fffffffd5f0, funfirstline=<optimized out>, sym=sym@entry=0x1549960) at ../../binutils-gdb/gdb/linespec.c:3860
....
#16 0x000000000054b733 in location_to_sals (b=b@entry=0x15792d0, location=0x157c230, search_pspace=search_pspace@entry=0x1148120, found=found@entry=0x7fffffffdc64) at ../../binutils-gdb/gdb/breakpoint.c:14211
#17 0x000000000054c1f5 in breakpoint_re_set_default (b=0x15792d0) at ../../binutils-gdb/gdb/breakpoint.c:14301
#18 0x00000000005412a9 in breakpoint_re_set_one (bint=bint@entry=0x15792d0) at ../../binutils-gdb/gdb/breakpoint.c:14412
This problem can be fixed by
- either each prologue analyzer doesn't throw exception,
- or catch the exception thrown from gdbarch_skip_prologue,
I choose the latter because the former needs to fix *every* prologue
analyzer to not throw exception.
This error can be reproduced by changing reread.exp. The test reread.exp
has already test that breakpoint can be reset correctly after the
executable is re-read. This patch extends this test by compiling test c
file with and without -fPIE.
(gdb) run ^M
The program being debugged has been started already.^M
Start it from the beginning? (y or n) y^M
x86_64/gdb/testsuite/outputs/gdb.base/reread/reread' has changed; re-reading symbols.
Error in re-setting breakpoint 1: Cannot access memory at address 0x555555554790^M
Error in re-setting breakpoint 2: Cannot access memory at address 0x555555554790^M
Starting program: /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.base/reread/reread ^M
This is foo^M
[Inferior 1 (process 27720) exited normally]^M
(gdb) FAIL: gdb.base/reread.exp: opts= "-fPIE" "ldflags=-pie" : run to foo() second time (the program exited)
This patch doesn't re-indent the code, to keep the patch simple.
gdb:
2017-07-25 Yao Qi <yao.qi@linaro.org>
PR gdb/21555
* arch-utils.c (gdbarch_skip_prologue_noexcept): New function.
* arch-utils.h (gdbarch_skip_prologue_noexcept): Declare.
* infrun.c: Include arch-utils.h
(handle_step_into_function): Call gdbarch_skip_prologue_noexcept.
(handle_step_into_function_backward): Likewise.
* symtab.c (skip_prologue_sal): Likewise.
gdb/testsuite:
2017-07-25 Yao Qi <yao.qi@linaro.org>
PR gdb/21555
* gdb.base/reread.exp: Wrap the whole test with two kinds of
compilation flags, with -fPIE and without -fPIE.
--- a/gdb/arch-utils.c
+++ b/gdb/arch-utils.c
@@ -964,6 +964,24 @@ default_guess_tracepoint_registers (struct gdbarch *gdbarch,
regcache_raw_supply (regcache, pc_regno, regs);
}
+/* See arch-utils.h. */
+
+CORE_ADDR
+gdbarch_skip_prologue_noexcept (gdbarch *gdbarch, CORE_ADDR pc) noexcept
+{
+ CORE_ADDR new_pc = pc;
+
+ TRY
+ {
+ new_pc = gdbarch_skip_prologue (gdbarch, pc);
+ }
+ CATCH (ex, RETURN_MASK_ALL)
+ {}
+ END_CATCH
+
+ return new_pc;
+}
+
/* -Wmissing-prototypes */
extern initialize_file_ftype _initialize_gdbarch_utils;
--- a/gdb/arch-utils.h
+++ b/gdb/arch-utils.h
@@ -267,4 +267,10 @@ extern void default_guess_tracepoint_registers (struct gdbarch *gdbarch,
struct regcache *regcache,
CORE_ADDR addr);
+/* Wrapper to gdbarch_skip_prologue, but doesn't throw exception. Catch
+ exception thrown from gdbarch_skip_prologue, and return PC. */
+
+extern CORE_ADDR gdbarch_skip_prologue_noexcept (gdbarch *gdbarch,
+ CORE_ADDR pc) noexcept;
+
#endif
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -64,6 +64,7 @@
#include "event-loop.h"
#include "thread-fsm.h"
#include "common/enum-flags.h"
+#include "arch-utils.h"
/* Prototypes for local functions */
@@ -7314,8 +7315,8 @@ handle_step_into_function (struct gdbarch *gdbarch,
cust = find_pc_compunit_symtab (stop_pc);
if (cust != NULL && compunit_language (cust) != language_asm)
- ecs->stop_func_start = gdbarch_skip_prologue (gdbarch,
- ecs->stop_func_start);
+ ecs->stop_func_start
+ = gdbarch_skip_prologue_noexcept (gdbarch, ecs->stop_func_start);
stop_func_sal = find_pc_line (ecs->stop_func_start, 0);
/* Use the step_resume_break to step until the end of the prologue,
@@ -7393,8 +7394,8 @@ handle_step_into_function_backward (struct gdbarch *gdbarch,
cust = find_pc_compunit_symtab (stop_pc);
if (cust != NULL && compunit_language (cust) != language_asm)
- ecs->stop_func_start = gdbarch_skip_prologue (gdbarch,
- ecs->stop_func_start);
+ ecs->stop_func_start
+ = gdbarch_skip_prologue_noexcept (gdbarch, ecs->stop_func_start);
stop_func_sal = find_pc_line (stop_pc, 0);
--- a/gdb/symtab.c
+++ b/gdb/symtab.c
@@ -61,6 +61,7 @@
#include "parser-defs.h"
#include "completer.h"
+#include "arch-utils.h"
/* Forward declarations for local functions. */
@@ -3626,7 +3627,7 @@ skip_prologue_sal (struct symtab_and_line *sal)
if (gdbarch_skip_entrypoint_p (gdbarch))
pc = gdbarch_skip_entrypoint (gdbarch, pc);
if (skip)
- pc = gdbarch_skip_prologue (gdbarch, pc);
+ pc = gdbarch_skip_prologue_noexcept (gdbarch, pc);
/* For overlays, map pc back into its mapped VMA range. */
pc = overlay_mapped_address (pc, section);
--- a/gdb/testsuite/gdb.base/reread.exp
+++ b/gdb/testsuite/gdb.base/reread.exp
@@ -15,111 +15,131 @@
set prototypes 1
-# build the first test case
+# Build programs in PIE mode, to reproduce PR 21555.
+foreach_with_prefix opts {
+ { "" "" }
+ { "-fPIE" "ldflags=-pie" } } {
-set testfile1 "reread1"
-set srcfile1 ${testfile1}.c
-# Cygwin needs $EXEEXT.
-set binfile1 [standard_output_file ${testfile1}$EXEEXT]
-
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile1}" executable {debug nowarnings}] != "" } {
- untested "failed to compile first testcase"
- return -1
-}
-
-# build the second test case
-
-set testfile2 "reread2"
-set srcfile2 ${testfile2}.c
-set binfile2 [standard_output_file ${testfile2}$EXEEXT]
-
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug nowarnings}] != ""
- && [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug nowarnings additional_flags=-DNO_SECTIONS}] != ""} {
- untested "failed to compile second testcase"
- return -1
-}
-
-# Start with a fresh gdb.
-
-set testfile "reread"
-set binfile [standard_output_file ${testfile}$EXEEXT]
-
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-
-# Load the first executable.
-
-gdb_rename_execfile ${binfile1} ${binfile}
-gdb_load ${binfile}
-
-# Set a breakpoint at foo
-
-gdb_test "break foo" \
- "Breakpoint.*at.* file .*$srcfile1, line 14.*" \
- "breakpoint foo in first file"
-
-
-# Run, should see "Breakpoint 1, foo () at hello1.c:14"
-
-gdb_run_cmd
-gdb_test "" "Breakpoint.* foo .* at .*$srcfile1:14.*" "run to foo()"
-
-# Restore first executable to its original name, and move
-# second executable into its place. Ensure that the new
-# executable is at least a second newer than the old.
-
-gdb_rename_execfile ${binfile} ${binfile1}
-gdb_rename_execfile ${binfile2} ${binfile}
-gdb_test "shell sleep 1" ".*" ""
-gdb_touch_execfile ${binfile}
-
-# Run a second time; GDB should detect that the executable has changed
-# and reset the breakpoints correctly.
-# Should see "Breakpoint 1, foo () at reread2.c:9"
-
-set test "run to foo() second time"
-if [is_remote target] {
- unsupported $test
-} else {
- gdb_run_cmd
- gdb_test "" "Breakpoint.* foo .* at .*:9.*" $test
-}
-
-
-### Second pass: verify that GDB checks the executable file's
-### timestamp when the program is *restarted*, not just when it exits.
-
-if [is_remote target] {
- unsupported "second pass: GDB should check for changes before running"
-} else {
-
- # Put the older executable back in place.
- gdb_rename_execfile ${binfile} ${binfile2}
- gdb_rename_execfile ${binfile1} ${binfile}
-
- # Restart GDB entirely.
- clean_restart ${binfile}
-
- # Set a breakpoint on foo and run to it.
- gdb_test "break foo" \
- "Breakpoint.*at.* file .*$srcfile1, line 14.*" \
- "second pass: breakpoint foo in first file"
- gdb_run_cmd
- gdb_test "" "Breakpoint.* foo .* at .*$srcfile1:14.*" "second pass: run to foo()"
-
- # This time, let the program run to completion. If GDB checks the
- # executable file's timestamp now, it won't notice any change.
- gdb_continue_to_end "second pass"
-
- # Now move the newer executable into place, and re-run. GDB
- # should still notice that the executable file has changed,
- # and still re-set the breakpoint appropriately.
- gdb_rename_execfile ${binfile} ${binfile1}
- gdb_rename_execfile ${binfile2} ${binfile}
- gdb_run_cmd
- gdb_test "" "Breakpoint.* foo .* at .*:9.*" "second pass: run to foo() second time"
-}
+ # build the first test case
+ set testfile1 "reread1"
+ set srcfile1 ${testfile1}.c
+ # Cygwin needs $EXEEXT.
+ set binfile1 [standard_output_file ${testfile1}$EXEEXT]
+
+ set testfile1_opt [list debug nowarnings \
+ additional_flags=[lindex $opts 0] \
+ [lindex $opts 1] ]
+ if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile1}" \
+ executable ${testfile1_opt}] != "" } {
+ untested "failed to compile first testcase"
+ return -1
+ }
+
+ # build the second test case
+
+ set testfile2 "reread2"
+ set srcfile2 ${testfile2}.c
+ set binfile2 [standard_output_file ${testfile2}$EXEEXT]
+
+ set testfile2_opt1 [list debug nowarnings \
+ additional_flags=[lindex $opts 0] \
+ [lindex $opts 1]]
+ set testfile2_op2 [list debug nowarnings \
+ "additional_flags=-DNO_SECTIONS [lindex $opts 0]" \
+ [lindex $opts 1]]
+ if { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" \
+ executable ${testfile2_opt1}] != ""
+ && [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" \
+ executable ${testfile2_opt2}] != ""} {
+ untested "failed to compile second testcase"
+ return -1
+ }
+
+ # Start with a fresh gdb.
+
+ set testfile "reread"
+ set binfile [standard_output_file ${testfile}$EXEEXT]
+
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+
+ # Load the first executable.
+
+ gdb_rename_execfile ${binfile1} ${binfile}
+ gdb_load ${binfile}
+
+ # Set a breakpoint at foo
+
+ gdb_test "break foo" \
+ "Breakpoint.*at.* file .*$srcfile1, line 14.*" \
+ "breakpoint foo in first file"
+
+
+ # Run, should see "Breakpoint 1, foo () at hello1.c:14"
+
+ gdb_run_cmd
+ gdb_test "" "Breakpoint.* foo .* at .*$srcfile1:14.*" "run to foo()"
+
+ # Restore first executable to its original name, and move
+ # second executable into its place. Ensure that the new
+ # executable is at least a second newer than the old.
+
+ gdb_rename_execfile ${binfile} ${binfile1}
+ gdb_rename_execfile ${binfile2} ${binfile}
+ gdb_test "shell sleep 1" ".*" ""
+ gdb_touch_execfile ${binfile}
+
+ # Run a second time; GDB should detect that the executable has changed
+ # and reset the breakpoints correctly.
+ # Should see "Breakpoint 1, foo () at reread2.c:9"
+
+ set test "run to foo() second time"
+ if [is_remote target] {
+ unsupported $test
+ } else {
+ gdb_run_cmd
+ gdb_test "" "Breakpoint.* foo .* at .*:9.*" $test
+ }
+
+
+ ### Second pass: verify that GDB checks the executable file's
+ ### timestamp when the program is *restarted*, not just when it exits.
+
+ if [is_remote target] {
+ unsupported "second pass: GDB should check for changes before running"
+ } else {
+
+ # Put the older executable back in place.
+ gdb_rename_execfile ${binfile} ${binfile2}
+ gdb_rename_execfile ${binfile1} ${binfile}
+
+ # Restart GDB entirely.
+ clean_restart ${binfile}
+
+ # Set a breakpoint on foo and run to it.
+ gdb_test "break foo" \
+ "Breakpoint.*at.* file .*$srcfile1, line 14.*" \
+ "second pass: breakpoint foo in first file"
+ gdb_run_cmd
+ gdb_test "" "Breakpoint.* foo .* at .*$srcfile1:14.*" \
+ "second pass: run to foo()"
+
+ # This time, let the program run to completion. If GDB checks the
+ # executable file's timestamp now, it won't notice any change.
+ gdb_continue_to_end "second pass"
+
+ # Now move the newer executable into place, and re-run. GDB
+ # should still notice that the executable file has changed,
+ # and still re-set the breakpoint appropriately.
+ gdb_rename_execfile ${binfile} ${binfile1}
+ gdb_rename_execfile ${binfile2} ${binfile}
+ gdb_run_cmd
+ gdb_test "" "Breakpoint.* foo .* at .*:9.*" \
+ "second pass: run to foo() second time"
+ }
+
+ }
# End of tests.
return 0
commit 16eb6b2db49e6cf2fdca56efd37689fcc170cd37
Author: Leszek Swirski <leszeks@google.com>
Date: Mon Aug 7 16:40:38 2017 +0200
Fix dwarf2_string_attr for -gsplit-dwarf
The dwarf2_string_attr did not allow DW_FORM_GNU_str_index as a form for
string types. This manifested as null strings in the namespace_name
lookup (replaced with "(anonymous namespace)") when debugging
Fission-compiled code.
gdb/ChangeLog:
* dwarf2read.c (dwarf2_string_attr): Allow DW_FORM_GNU_strp_alt.
### a/gdb/ChangeLog
### b/gdb/ChangeLog
## -1,3 +1,7 @@
+2017-08-07 Leszek Swirski <leszeks@google.com>
+
+ * dwarf2read.c (dwarf2_string_attr): Allow DW_FORM_GNU_strp_alt.
+
2017-08-07 Simon Marchi <simon.marchi@ericsson.com>
* remote-sim.c (gdbsim_load): Remove char **argv local variable.
--- a/gdb/dwarf2read.c
+++ b/gdb/dwarf2read.c
@@ -17623,7 +17623,8 @@ dwarf2_string_attr (struct die_info *die, unsigned int name, struct dwarf2_cu *c
if (attr != NULL)
{
if (attr->form == DW_FORM_strp || attr->form == DW_FORM_line_strp
- || attr->form == DW_FORM_string || attr->form == DW_FORM_GNU_strp_alt)
+ || attr->form == DW_FORM_string || DW_FORM_GNU_str_index
+ || attr->form == DW_FORM_GNU_strp_alt)
str = DW_STRING (attr);
else
complaint (&symfile_complaints,
commit b33404388e5bbd8a1fddfde73cd4593ae2b557e8
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Aug 9 05:01:55 2017 -0700
gdb: Fix build failure with GCC 7
Fix:
/export/gnu/import/git/sources/binutils-gdb/gdb/dwarf2read.c: In function ‘const char* dwarf2_string_attr(die_info*, unsigned int, dwarf2_cu*)’:
/export/gnu/import/git/sources/binutils-gdb/gdb/dwarf2read.c:17626:39: error: enum constant in boolean context [-Werror=int-in-bool-context]
|| attr->form == DW_FORM_string || DW_FORM_GNU_str_index
* dwarf2read.c (dwarf2_string_attr): Fix a typo.
### a/gdb/ChangeLog
### b/gdb/ChangeLog
## -1,3 +1,7 @@
+2017-08-09 H.J. Lu <hongjiu.lu@intel.com>
+
+ * dwarf2read.c (dwarf2_string_attr): Fix a typo.
+
2017-08-09 Alex Lindsay <alexlindsay239@gmail.com>
Yao Qi <yao.qi@linaro.org>
--- a/gdb/dwarf2read.c
+++ b/gdb/dwarf2read.c
@@ -17623,7 +17623,8 @@ dwarf2_string_attr (struct die_info *die, unsigned int name, struct dwarf2_cu *c
if (attr != NULL)
{
if (attr->form == DW_FORM_strp || attr->form == DW_FORM_line_strp
- || attr->form == DW_FORM_string || DW_FORM_GNU_str_index
+ || attr->form == DW_FORM_string
+ || attr->form == DW_FORM_GNU_str_index
|| attr->form == DW_FORM_GNU_strp_alt)
str = DW_STRING (attr);
else