Temporarly install an old <sdt.h> version into the build tree to
avoid a LIBC_PROBE_ASM build failure on s390x:
glibc build failure due to Systemtap probe change
<https://sourceware.org/pipermail/libc-alpha/2021-November/133134.html>
#pragma GCC system_header has been added to this version to suppress
a warning related to undefined __STDC_VERSION__ in assembler mode.
diff --git a/include/sys/sdt-config.h b/include/sys/sdt-config.h
new file mode 100644
index 0000000000000000..733045a52771e330
--- /dev/null
+++ b/include/sys/sdt-config.h
@@ -0,0 +1,6 @@
+/* includes/sys/sdt-config.h. Generated from sdt-config.h.in by configure.
+
+ This file just defines _SDT_ASM_SECTION_AUTOGROUP_SUPPORT to 0 or 1 to
+ indicate whether the assembler supports "?" in .pushsection directives. */
+
+#define _SDT_ASM_SECTION_AUTOGROUP_SUPPORT 1
diff --git a/include/sys/sdt.h b/include/sys/sdt.h
new file mode 100644
index 0000000000000000..6d4ff61eaac27785
--- /dev/null
+++ b/include/sys/sdt.h
@@ -0,0 +1,458 @@
+/* <sys/sdt.h> - Systemtap static probe definition macros.
+
+ This file is dedicated to the public domain, pursuant to CC0
+ (https://creativecommons.org/publicdomain/zero/1.0/)
+*/
+
+#ifndef _SYS_SDT_H
+#define _SYS_SDT_H 1
+
+#pragma GCC system_header
+
+/*
+ This file defines a family of macros
+
+ STAP_PROBEn(op1, ..., opn)
+
+ that emit a nop into the instruction stream, and some data into an auxiliary
+ note section. The data in the note section describes the operands, in terms
+ of size and location. Each location is encoded as assembler operand string.
+ Consumer tools such as gdb or systemtap insert breakpoints on top of
+ the nop, and decode the location operand-strings, like an assembler,
+ to find the values being passed.
+
+ The operand strings are selected by the compiler for each operand.
+ They are constrained by gcc inline-assembler codes. The default is:
+
+ #define STAP_SDT_ARG_CONSTRAINT nor
+
+ This is a good default if the operands tend to be integral and
+ moderate in number (smaller than number of registers). In other
+ cases, the compiler may report "'asm' requires impossible reload" or
+ similar. In this case, consider simplifying the macro call (fewer
+ and simpler operands), reduce optimization, or override the default
+ constraints string via:
+
+ #define STAP_SDT_ARG_CONSTRAINT g
+ #include <sys/sdt.h>
+
+ See also:
+ https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation
+ https://gcc.gnu.org/onlinedocs/gcc/Constraints.html
+ */
+
+
+
+#ifdef __ASSEMBLER__
+# define _SDT_PROBE(provider, name, n, arglist) \
+ _SDT_ASM_BODY(provider, name, _SDT_ASM_STRING_1, (_SDT_DEPAREN_##n arglist)) \
+ _SDT_ASM_BASE
+# define _SDT_ASM_1(x) x;
+# define _SDT_ASM_2(a, b) a,b;
+# define _SDT_ASM_3(a, b, c) a,b,c;
+# define _SDT_ASM_5(a, b, c, d, e) a,b,c,d,e;
+# define _SDT_ASM_STRING_1(x) .asciz #x;
+# define _SDT_DEPAREN_0() /* empty */
+# define _SDT_DEPAREN_1(a) a
+# define _SDT_DEPAREN_2(a,b) a b
+# define _SDT_DEPAREN_3(a,b,c) a b c
+# define _SDT_DEPAREN_4(a,b,c,d) a b c d
+# define _SDT_DEPAREN_5(a,b,c,d,e) a b c d e
+# define _SDT_DEPAREN_6(a,b,c,d,e,f) a b c d e f
+# define _SDT_DEPAREN_7(a,b,c,d,e,f,g) a b c d e f g
+# define _SDT_DEPAREN_8(a,b,c,d,e,f,g,h) a b c d e f g h
+# define _SDT_DEPAREN_9(a,b,c,d,e,f,g,h,i) a b c d e f g h i
+# define _SDT_DEPAREN_10(a,b,c,d,e,f,g,h,i,j) a b c d e f g h i j
+# define _SDT_DEPAREN_11(a,b,c,d,e,f,g,h,i,j,k) a b c d e f g h i j k
+# define _SDT_DEPAREN_12(a,b,c,d,e,f,g,h,i,j,k,l) a b c d e f g h i j k l
+#else
+#if defined _SDT_HAS_SEMAPHORES
+#define _SDT_NOTE_SEMAPHORE_USE(provider, name) \
+ __asm__ __volatile__ ("" :: "m" (provider##_##name##_semaphore));
+#else
+#define _SDT_NOTE_SEMAPHORE_USE(provider, name)
+#endif
+
+# define _SDT_PROBE(provider, name, n, arglist) \
+ do { \
+ _SDT_NOTE_SEMAPHORE_USE(provider, name); \
+ __asm__ __volatile__ (_SDT_ASM_BODY(provider, name, _SDT_ASM_ARGS, (n)) \
+ :: _SDT_ASM_OPERANDS_##n arglist); \
+ __asm__ __volatile__ (_SDT_ASM_BASE); \
+ } while (0)
+# define _SDT_S(x) #x
+# define _SDT_ASM_1(x) _SDT_S(x) "\n"
+# define _SDT_ASM_2(a, b) _SDT_S(a) "," _SDT_S(b) "\n"
+# define _SDT_ASM_3(a, b, c) _SDT_S(a) "," _SDT_S(b) "," \
+ _SDT_S(c) "\n"
+# define _SDT_ASM_5(a, b, c, d, e) _SDT_S(a) "," _SDT_S(b) "," \
+ _SDT_S(c) "," _SDT_S(d) "," \
+ _SDT_S(e) "\n"
+# define _SDT_ASM_ARGS(n) _SDT_ASM_STRING(_SDT_ASM_TEMPLATE_##n)
+# define _SDT_ASM_STRING_1(x) _SDT_ASM_1(.asciz #x)
+
+# define _SDT_ARGFMT(no) %n[_SDT_S##no]@_SDT_ARGTMPL(_SDT_A##no)
+
+# ifndef STAP_SDT_ARG_CONSTRAINT
+# if defined __powerpc__
+# define STAP_SDT_ARG_CONSTRAINT nZr
+# else
+# define STAP_SDT_ARG_CONSTRAINT nor
+# endif
+# endif
+
+# define _SDT_STRINGIFY(x) #x
+# define _SDT_ARG_CONSTRAINT_STRING(x) _SDT_STRINGIFY(x)
+# define _SDT_ARG(n, x) \
+ [_SDT_S##n] "n" ((_SDT_ARGSIGNED (x) ? 1 : -1) * (int) _SDT_ARGSIZE (x)), \
+ [_SDT_A##n] _SDT_ARG_CONSTRAINT_STRING (STAP_SDT_ARG_CONSTRAINT) (_SDT_ARGVAL (x))
+#endif
+#define _SDT_ASM_STRING(x) _SDT_ASM_STRING_1(x)
+
+#define _SDT_ARGARRAY(x) (__builtin_classify_type (x) == 14 \
+ || __builtin_classify_type (x) == 5)
+
+#ifdef __cplusplus
+# define _SDT_ARGSIGNED(x) (!_SDT_ARGARRAY (x) \
+ && __sdt_type<__typeof (x)>::__sdt_signed)
+# define _SDT_ARGSIZE(x) (_SDT_ARGARRAY (x) \
+ ? sizeof (void *) : sizeof (x))
+# define _SDT_ARGVAL(x) (x)
+
+# include <cstddef>
+
+template<typename __sdt_T>
+struct __sdt_type
+{
+ static const bool __sdt_signed = false;
+};
+
+#define __SDT_ALWAYS_SIGNED(T) \
+template<> struct __sdt_type<T> { static const bool __sdt_signed = true; };
+#define __SDT_COND_SIGNED(T,CT) \
+template<> struct __sdt_type<T> { static const bool __sdt_signed = ((CT)(-1) < 1); };
+__SDT_ALWAYS_SIGNED(signed char)
+__SDT_ALWAYS_SIGNED(short)
+__SDT_ALWAYS_SIGNED(int)
+__SDT_ALWAYS_SIGNED(long)
+__SDT_ALWAYS_SIGNED(long long)
+__SDT_ALWAYS_SIGNED(volatile signed char)
+__SDT_ALWAYS_SIGNED(volatile short)
+__SDT_ALWAYS_SIGNED(volatile int)
+__SDT_ALWAYS_SIGNED(volatile long)
+__SDT_ALWAYS_SIGNED(volatile long long)
+__SDT_ALWAYS_SIGNED(const signed char)
+__SDT_ALWAYS_SIGNED(const short)
+__SDT_ALWAYS_SIGNED(const int)
+__SDT_ALWAYS_SIGNED(const long)
+__SDT_ALWAYS_SIGNED(const long long)
+__SDT_ALWAYS_SIGNED(const volatile signed char)
+__SDT_ALWAYS_SIGNED(const volatile short)
+__SDT_ALWAYS_SIGNED(const volatile int)
+__SDT_ALWAYS_SIGNED(const volatile long)
+__SDT_ALWAYS_SIGNED(const volatile long long)
+__SDT_COND_SIGNED(char, char)
+__SDT_COND_SIGNED(wchar_t, wchar_t)
+__SDT_COND_SIGNED(volatile char, char)
+__SDT_COND_SIGNED(volatile wchar_t, wchar_t)
+__SDT_COND_SIGNED(const char, char)
+__SDT_COND_SIGNED(const wchar_t, wchar_t)
+__SDT_COND_SIGNED(const volatile char, char)
+__SDT_COND_SIGNED(const volatile wchar_t, wchar_t)
+#if defined (__GNUC__) && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
+/* __SDT_COND_SIGNED(char16_t) */
+/* __SDT_COND_SIGNED(char32_t) */
+#endif
+
+template<typename __sdt_E>
+struct __sdt_type<__sdt_E[]> : public __sdt_type<__sdt_E *> {};
+
+template<typename __sdt_E, size_t __sdt_N>
+struct __sdt_type<__sdt_E[__sdt_N]> : public __sdt_type<__sdt_E *> {};
+
+#elif !defined(__ASSEMBLER__)
+__extension__ extern unsigned long long __sdt_unsp;
+# define _SDT_ARGINTTYPE(x) \
+ __typeof (__builtin_choose_expr (((__builtin_classify_type (x) \
+ + 3) & -4) == 4, (x), 0U))
+# define _SDT_ARGSIGNED(x) \
+ (!__extension__ \
+ (__builtin_constant_p ((((unsigned long long) \
+ (_SDT_ARGINTTYPE (x)) __sdt_unsp) \
+ & ((unsigned long long)1 << (sizeof (unsigned long long) \
+ * __CHAR_BIT__ - 1))) == 0) \
+ || (_SDT_ARGINTTYPE (x)) -1 > (_SDT_ARGINTTYPE (x)) 0))
+# define _SDT_ARGSIZE(x) \
+ (_SDT_ARGARRAY (x) ? sizeof (void *) : sizeof (x))
+# define _SDT_ARGVAL(x) (x)
+#endif
+
+#if defined __powerpc__ || defined __powerpc64__
+# define _SDT_ARGTMPL(id) %I[id]%[id]
+#elif defined __i386__
+# define _SDT_ARGTMPL(id) %k[id] /* gcc.gnu.org/PR80115 sourceware.org/PR24541 */
+#else
+# define _SDT_ARGTMPL(id) %[id]
+#endif
+
+/* NB: gdb PR24541 highlighted an unspecified corner of the sdt.h
+ operand note format.
+
+ The named register may be a longer or shorter (!) alias for the
+ storage where the value in question is found. For example, on
+ i386, 64-bit value may be put in register pairs, and the register
+ name stored would identify just one of them. Previously, gcc was
+ asked to emit the %w[id] (16-bit alias of some registers holding
+ operands), even when a wider 32-bit value was used.
+
+ Bottom line: the byte-width given before the @ sign governs. If
+ there is a mismatch between that width and that of the named
+ register, then a sys/sdt.h note consumer may need to employ
+ architecture-specific heuristics to figure out where the compiler
+ has actually put the complete value.
+*/
+
+#ifdef __LP64__
+# define _SDT_ASM_ADDR .8byte
+#else
+# define _SDT_ASM_ADDR .4byte
+#endif
+
+/* The ia64 and s390 nop instructions take an argument. */
+#if defined(__ia64__) || defined(__s390__) || defined(__s390x__)
+#define _SDT_NOP nop 0
+#else
+#define _SDT_NOP nop
+#endif
+
+#define _SDT_NOTE_NAME "stapsdt"
+#define _SDT_NOTE_TYPE 3
+
+/* If the assembler supports the necessary feature, then we can play
+ nice with code in COMDAT sections, which comes up in C++ code.
+ Without that assembler support, some combinations of probe placements
+ in certain kinds of C++ code may produce link-time errors. */
+#include "sdt-config.h"
+#if _SDT_ASM_SECTION_AUTOGROUP_SUPPORT
+# define _SDT_ASM_AUTOGROUP "?"
+#else
+# define _SDT_ASM_AUTOGROUP ""
+#endif
+
+#define _SDT_ASM_BODY(provider, name, pack_args, args) \
+ _SDT_ASM_1(990: _SDT_NOP) \
+ _SDT_ASM_3( .pushsection .note.stapsdt,_SDT_ASM_AUTOGROUP,"note") \
+ _SDT_ASM_1( .balign 4) \
+ _SDT_ASM_3( .4byte 992f-991f, 994f-993f, _SDT_NOTE_TYPE) \
+ _SDT_ASM_1(991: .asciz _SDT_NOTE_NAME) \
+ _SDT_ASM_1(992: .balign 4) \
+ _SDT_ASM_1(993: _SDT_ASM_ADDR 990b) \
+ _SDT_ASM_1( _SDT_ASM_ADDR _.stapsdt.base) \
+ _SDT_SEMAPHORE(provider,name) \
+ _SDT_ASM_STRING(provider) \
+ _SDT_ASM_STRING(name) \
+ pack_args args \
+ _SDT_ASM_1(994: .balign 4) \
+ _SDT_ASM_1( .popsection)
+
+#define _SDT_ASM_BASE \
+ _SDT_ASM_1(.ifndef _.stapsdt.base) \
+ _SDT_ASM_5( .pushsection .stapsdt.base,"aG","progbits", \
+ .stapsdt.base,comdat) \
+ _SDT_ASM_1( .weak _.stapsdt.base) \
+ _SDT_ASM_1( .hidden _.stapsdt.base) \
+ _SDT_ASM_1( _.stapsdt.base: .space 1) \
+ _SDT_ASM_2( .size _.stapsdt.base, 1) \
+ _SDT_ASM_1( .popsection) \
+ _SDT_ASM_1(.endif)
+
+#if defined _SDT_HAS_SEMAPHORES
+#define _SDT_SEMAPHORE(p,n) \
+ _SDT_ASM_1( _SDT_ASM_ADDR p##_##n##_semaphore)
+#else
+#define _SDT_SEMAPHORE(p,n) _SDT_ASM_1( _SDT_ASM_ADDR 0)
+#endif
+
+#define _SDT_ASM_TEMPLATE_0 /* no arguments */
+#define _SDT_ASM_TEMPLATE_1 _SDT_ARGFMT(1)
+#define _SDT_ASM_TEMPLATE_2 _SDT_ASM_TEMPLATE_1 _SDT_ARGFMT(2)
+#define _SDT_ASM_TEMPLATE_3 _SDT_ASM_TEMPLATE_2 _SDT_ARGFMT(3)
+#define _SDT_ASM_TEMPLATE_4 _SDT_ASM_TEMPLATE_3 _SDT_ARGFMT(4)
+#define _SDT_ASM_TEMPLATE_5 _SDT_ASM_TEMPLATE_4 _SDT_ARGFMT(5)
+#define _SDT_ASM_TEMPLATE_6 _SDT_ASM_TEMPLATE_5 _SDT_ARGFMT(6)
+#define _SDT_ASM_TEMPLATE_7 _SDT_ASM_TEMPLATE_6 _SDT_ARGFMT(7)
+#define _SDT_ASM_TEMPLATE_8 _SDT_ASM_TEMPLATE_7 _SDT_ARGFMT(8)
+#define _SDT_ASM_TEMPLATE_9 _SDT_ASM_TEMPLATE_8 _SDT_ARGFMT(9)
+#define _SDT_ASM_TEMPLATE_10 _SDT_ASM_TEMPLATE_9 _SDT_ARGFMT(10)
+#define _SDT_ASM_TEMPLATE_11 _SDT_ASM_TEMPLATE_10 _SDT_ARGFMT(11)
+#define _SDT_ASM_TEMPLATE_12 _SDT_ASM_TEMPLATE_11 _SDT_ARGFMT(12)
+#define _SDT_ASM_OPERANDS_0() [__sdt_dummy] "g" (0)
+#define _SDT_ASM_OPERANDS_1(arg1) _SDT_ARG(1, arg1)
+#define _SDT_ASM_OPERANDS_2(arg1, arg2) \
+ _SDT_ASM_OPERANDS_1(arg1), _SDT_ARG(2, arg2)
+#define _SDT_ASM_OPERANDS_3(arg1, arg2, arg3) \
+ _SDT_ASM_OPERANDS_2(arg1, arg2), _SDT_ARG(3, arg3)
+#define _SDT_ASM_OPERANDS_4(arg1, arg2, arg3, arg4) \
+ _SDT_ASM_OPERANDS_3(arg1, arg2, arg3), _SDT_ARG(4, arg4)
+#define _SDT_ASM_OPERANDS_5(arg1, arg2, arg3, arg4, arg5) \
+ _SDT_ASM_OPERANDS_4(arg1, arg2, arg3, arg4), _SDT_ARG(5, arg5)
+#define _SDT_ASM_OPERANDS_6(arg1, arg2, arg3, arg4, arg5, arg6) \
+ _SDT_ASM_OPERANDS_5(arg1, arg2, arg3, arg4, arg5), _SDT_ARG(6, arg6)
+#define _SDT_ASM_OPERANDS_7(arg1, arg2, arg3, arg4, arg5, arg6, arg7) \
+ _SDT_ASM_OPERANDS_6(arg1, arg2, arg3, arg4, arg5, arg6), _SDT_ARG(7, arg7)
+#define _SDT_ASM_OPERANDS_8(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8) \
+ _SDT_ASM_OPERANDS_7(arg1, arg2, arg3, arg4, arg5, arg6, arg7), \
+ _SDT_ARG(8, arg8)
+#define _SDT_ASM_OPERANDS_9(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9) \
+ _SDT_ASM_OPERANDS_8(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8), \
+ _SDT_ARG(9, arg9)
+#define _SDT_ASM_OPERANDS_10(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10) \
+ _SDT_ASM_OPERANDS_9(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9), \
+ _SDT_ARG(10, arg10)
+#define _SDT_ASM_OPERANDS_11(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11) \
+ _SDT_ASM_OPERANDS_10(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9, arg10), \
+ _SDT_ARG(11, arg11)
+#define _SDT_ASM_OPERANDS_12(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11,arg12) \
+ _SDT_ASM_OPERANDS_11(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9, arg10, arg11), \
+ _SDT_ARG(12, arg12)
+
+/* These macros can be used in C, C++, or assembly code.
+ In assembly code the arguments should use normal assembly operand syntax. */
+
+#define STAP_PROBE(provider, name) \
+ _SDT_PROBE(provider, name, 0, ())
+#define STAP_PROBE1(provider, name, arg1) \
+ _SDT_PROBE(provider, name, 1, (arg1))
+#define STAP_PROBE2(provider, name, arg1, arg2) \
+ _SDT_PROBE(provider, name, 2, (arg1, arg2))
+#define STAP_PROBE3(provider, name, arg1, arg2, arg3) \
+ _SDT_PROBE(provider, name, 3, (arg1, arg2, arg3))
+#define STAP_PROBE4(provider, name, arg1, arg2, arg3, arg4) \
+ _SDT_PROBE(provider, name, 4, (arg1, arg2, arg3, arg4))
+#define STAP_PROBE5(provider, name, arg1, arg2, arg3, arg4, arg5) \
+ _SDT_PROBE(provider, name, 5, (arg1, arg2, arg3, arg4, arg5))
+#define STAP_PROBE6(provider, name, arg1, arg2, arg3, arg4, arg5, arg6) \
+ _SDT_PROBE(provider, name, 6, (arg1, arg2, arg3, arg4, arg5, arg6))
+#define STAP_PROBE7(provider, name, arg1, arg2, arg3, arg4, arg5, arg6, arg7) \
+ _SDT_PROBE(provider, name, 7, (arg1, arg2, arg3, arg4, arg5, arg6, arg7))
+#define STAP_PROBE8(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8) \
+ _SDT_PROBE(provider, name, 8, (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8))
+#define STAP_PROBE9(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9)\
+ _SDT_PROBE(provider, name, 9, (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9))
+#define STAP_PROBE10(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10) \
+ _SDT_PROBE(provider, name, 10, \
+ (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10))
+#define STAP_PROBE11(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11) \
+ _SDT_PROBE(provider, name, 11, \
+ (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11))
+#define STAP_PROBE12(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11,arg12) \
+ _SDT_PROBE(provider, name, 12, \
+ (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11,arg12))
+
+/* This STAP_PROBEV macro can be used in variadic scenarios, where the
+ number of probe arguments is not known until compile time. Since
+ variadic macro support may vary with compiler options, you must
+ pre-#define SDT_USE_VARIADIC to enable this type of probe.
+
+ The trick to count __VA_ARGS__ was inspired by this post by
+ Laurent Deniau <laurent.deniau@cern.ch>:
+ http://groups.google.com/group/comp.std.c/msg/346fc464319b1ee5
+
+ Note that our _SDT_NARG is called with an extra 0 arg that's not
+ counted, so we don't have to worry about the behavior of macros
+ called without any arguments. */
+
+#ifdef SDT_USE_VARIADIC
+#define _SDT_NARG(...) __SDT_NARG(__VA_ARGS__, 12,11,10,9,8,7,6,5,4,3,2,1,0)
+#define __SDT_NARG(_0,_1,_2,_3,_4,_5,_6,_7,_8,_9,_10,_11,_12, N, ...) N
+#define _SDT_PROBE_N(provider, name, N, ...) \
+ _SDT_PROBE(provider, name, N, (__VA_ARGS__))
+#define STAP_PROBEV(provider, name, ...) \
+ _SDT_PROBE_N(provider, name, _SDT_NARG(0, ##__VA_ARGS__), ##__VA_ARGS__)
+#endif
+
+/* These macros are for use in asm statements. You must compile
+ with -std=gnu99 or -std=c99 to use the STAP_PROBE_ASM macro.
+
+ The STAP_PROBE_ASM macro generates a quoted string to be used in the
+ template portion of the asm statement, concatenated with strings that
+ contain the actual assembly code around the probe site.
+
+ For example:
+
+ asm ("before\n"
+ STAP_PROBE_ASM(provider, fooprobe, %eax 4(%esi))
+ "after");
+
+ emits the assembly code for "before\nafter", with a probe in between.
+ The probe arguments are the %eax register, and the value of the memory
+ word located 4 bytes past the address in the %esi register. Note that
+ because this is a simple asm, not a GNU C extended asm statement, these
+ % characters do not need to be doubled to generate literal %reg names.
+
+ In a GNU C extended asm statement, the probe arguments can be specified
+ using the macro STAP_PROBE_ASM_TEMPLATE(n) for n arguments. The paired
+ macro STAP_PROBE_ASM_OPERANDS gives the C values of these probe arguments,
+ and appears in the input operand list of the asm statement. For example:
+
+ asm ("someinsn %0,%1\n" // %0 is output operand, %1 is input operand
+ STAP_PROBE_ASM(provider, fooprobe, STAP_PROBE_ASM_TEMPLATE(3))
+ "otherinsn %[namedarg]"
+ : "r" (outvar)
+ : "g" (some_value), [namedarg] "i" (1234),
+ STAP_PROBE_ASM_OPERANDS(3, some_value, some_ptr->field, 1234));
+
+ This is just like writing:
+
+ STAP_PROBE3(provider, fooprobe, some_value, some_ptr->field, 1234));
+
+ but the probe site is right between "someinsn" and "otherinsn".
+
+ The probe arguments in STAP_PROBE_ASM can be given as assembly
+ operands instead, even inside a GNU C extended asm statement.
+ Note that these can use operand templates like %0 or %[name],
+ and likewise they must write %%reg for a literal operand of %reg. */
+
+#if __STDC_VERSION__ >= 199901L
+# define STAP_PROBE_ASM(provider, name, ...) \
+ _SDT_ASM_BODY(provider, name, _SDT_ASM_STRING, (__VA_ARGS__)) \
+ _SDT_ASM_BASE
+# define STAP_PROBE_ASM_OPERANDS(n, ...) _SDT_ASM_OPERANDS_##n(__VA_ARGS__)
+#else
+# define STAP_PROBE_ASM(provider, name, args) \
+ _SDT_ASM_BODY(provider, name, _SDT_ASM_STRING, (args)) \
+ _SDT_ASM_BASE
+#endif
+#define STAP_PROBE_ASM_TEMPLATE(n) _SDT_ASM_TEMPLATE_##n
+
+
+/* DTrace compatible macro names. */
+#define DTRACE_PROBE(provider,probe) \
+ STAP_PROBE(provider,probe)
+#define DTRACE_PROBE1(provider,probe,parm1) \
+ STAP_PROBE1(provider,probe,parm1)
+#define DTRACE_PROBE2(provider,probe,parm1,parm2) \
+ STAP_PROBE2(provider,probe,parm1,parm2)
+#define DTRACE_PROBE3(provider,probe,parm1,parm2,parm3) \
+ STAP_PROBE3(provider,probe,parm1,parm2,parm3)
+#define DTRACE_PROBE4(provider,probe,parm1,parm2,parm3,parm4) \
+ STAP_PROBE4(provider,probe,parm1,parm2,parm3,parm4)
+#define DTRACE_PROBE5(provider,probe,parm1,parm2,parm3,parm4,parm5) \
+ STAP_PROBE5(provider,probe,parm1,parm2,parm3,parm4,parm5)
+#define DTRACE_PROBE6(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6) \
+ STAP_PROBE6(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6)
+#define DTRACE_PROBE7(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7) \
+ STAP_PROBE7(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7)
+#define DTRACE_PROBE8(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8) \
+ STAP_PROBE8(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8)
+#define DTRACE_PROBE9(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9) \
+ STAP_PROBE9(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9)
+#define DTRACE_PROBE10(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10) \
+ STAP_PROBE10(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10)
+#define DTRACE_PROBE11(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11) \
+ STAP_PROBE11(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11)
+#define DTRACE_PROBE12(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11,parm12) \
+ STAP_PROBE12(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11,parm12)
+
+
+#endif /* sys/sdt.h */