Blob Blame History Raw
From 97b1242450df25648d203acf7cc297cd46d10e8c Mon Sep 17 00:00:00 2001
From: Chris Leech <cleech@redhat.com>
Date: Mon, 19 Nov 2012 16:37:13 -0800
Subject: [PATCH] update initscripts and docs

---
 README          | 12 +++++-------
 etc/iscsid.conf | 23 +++++++++++------------
 usr/idbm.c      |  4 ++++
 3 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/README b/README
index 508c9d7..b62a14e 100644
--- a/README
+++ b/README
@@ -77,11 +77,6 @@ the cache sync command will fail.
 - iscsiadm's -P 3 option will not print out scsi devices.
 - iscsid will not automatically online devices.
 
-You need to enable "Cryptographic API" under "Cryptographic options" in the
-kernel config. And you must enable "CRC32c CRC algorithm" even if
-you do not use header or data digests. They are the kernel options
-CONFIG_CRYPTO and CONFIG_CRYPTO_CRC32C, respectively.
-
 The userspace components iscsid, iscsiadm and iscsistart require the
 open-isns library, which can be found here:
 	https://github.com/gonzoleeman/open-isns/releases
@@ -1163,11 +1158,11 @@ Red Hat or Fedora:
 -----------------
 To start open-iscsi in Red Hat/Fedora you can do:
 
-	systemctl start open-iscsi
+	systemctl start iscsi
 
 To get open-iscsi to automatically start at run time you may have to
 run:
-	systemctl enable open-iscsi
+	systemctl enable iscsi
 
 And, to automatically mount a file system during startup
 you must have the partition entry in /etc/fstab marked with the "_netdev"
@@ -1370,6 +1365,9 @@ iscsid will only perform rediscovery when it gets a SCN from the server.
 #   linux-isns (SLES's iSNS server) where it sometimes does not send SCN
 #   events in the proper format, so they may not get handled.
 
+To set the startup value, so that nodes are not logged into automatically
+use the value "manual".
+
 Examples
 --------
 
diff --git a/etc/iscsid.conf b/etc/iscsid.conf
index f21ed3d..420145b 100644
--- a/etc/iscsid.conf
+++ b/etc/iscsid.conf
@@ -19,8 +19,8 @@
 # the time then leave this attribute commented out.
 #
 # Default for Fedora and RHEL. (uncomment to activate).
-# iscsid.startup = /bin/systemctl start iscsid.socket iscsiuio.socket
-#
+iscsid.startup = /bin/systemctl start iscsid.socket iscsiuio.socket
+# 
 # Default if you are not using systemd (uncomment to activate)
 # iscsid.startup = /usr/bin/service start iscsid
 
@@ -41,8 +41,8 @@
 # To request that the iscsi initd scripts startup a session set to "automatic".
 # node.startup = automatic
 #
-# To manually startup the session set to "manual". The default is manual.
-node.startup = manual
+# To manually startup the session set to "manual". The default is automatic.
+node.startup = automatic
 
 # For "automatic" startup nodes, setting this to "Yes" will try logins on each
 # available iface until one succeeds, and then stop.  The default "No" will try
@@ -271,28 +271,27 @@ node.conn[0].iscsi.MaxXmitDataSegmentLength = 0
 discovery.sendtargets.iscsi.MaxRecvDataSegmentLength = 32768
 
 # To allow the targets to control the setting of the digest checking,
-# with the initiator requesting a preference of enabling the checking, uncomment# one or both of the following lines:
+# with the initiator requesting a preference of enabling the checking, uncomment
+# the following lines (Data digests are not supported.):
 #node.conn[0].iscsi.HeaderDigest = CRC32C,None
-#node.conn[0].iscsi.DataDigest = CRC32C,None
+
 #
 # To allow the targets to control the setting of the digest checking,
 # with the initiator requesting a preference of disabling the checking,
-# uncomment one or both of the following lines:
+# uncomment the following line:
 #node.conn[0].iscsi.HeaderDigest = None,CRC32C
-#node.conn[0].iscsi.DataDigest = None,CRC32C
 #
 # To enable CRC32C digest checking for the header and/or data part of
-# iSCSI PDUs, uncomment one or both of the following lines:
+# iSCSI PDUs, uncomment the following line:
 #node.conn[0].iscsi.HeaderDigest = CRC32C
-#node.conn[0].iscsi.DataDigest = CRC32C
 #
 # To disable digest checking for the header and/or data part of
-# iSCSI PDUs, uncomment one or both of the following lines:
+# iSCSI PDUs, uncomment the following line:
 #node.conn[0].iscsi.HeaderDigest = None
-#node.conn[0].iscsi.DataDigest = None
 #
 # The default is to never use DataDigests or HeaderDigests.
 #
+node.conn[0].iscsi.HeaderDigest = None
 
 # For multipath configurations, you may want more than one session to be
 # created on each iface record.  If node.session.nr_sessions is greater
diff --git a/usr/idbm.c b/usr/idbm.c
index f1e5c88..0f0f17a 100644
--- a/usr/idbm.c
+++ b/usr/idbm.c
@@ -566,9 +566,13 @@ idbm_recinfo_node(node_rec_t *r, recinfo_t *ri)
 				 IDBM_SHOW, "None", "CRC32C", "CRC32C,None",
 				 "None,CRC32C", num, 1);
 		sprintf(key, CONN_DATA_DIGEST, i);
+
+#if 0
+We do not support data digests
 		__recinfo_int_o4(key, ri, r, conn[i].iscsi.DataDigest, IDBM_SHOW,
 				 "None", "CRC32C", "CRC32C,None",
 				 "None,CRC32C", num, 1);
+#endif
 		sprintf(key, CONN_IFMARKER, i);
 		__recinfo_int_o2(key, ri, r, conn[i].iscsi.IFMarker, IDBM_SHOW,
 				"No", "Yes", num, 1);
-- 
2.26.2