From f822982515378982dc8d8e6058579288d0ee3cff Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 20:55:19 -0800
Subject: [PATCH 01/15] Input: ALPS - document the alps.h data structures
Add kernel-doc markup.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.h | 74 ++++++++++++++++++++++++++++++++++++++--------
1 file changed, 61 insertions(+), 13 deletions(-)
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index ae1ac35..67be4e5 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -17,30 +17,78 @@
#define ALPS_PROTO_V3 2
#define ALPS_PROTO_V4 3
+/**
+ * struct alps_model_info - touchpad ID table
+ * @signature: E7 response string to match.
+ * @command_mode_resp: For V3/V4 touchpads, the final byte of the EC response
+ * (aka command mode response) identifies the firmware minor version. This
+ * can be used to distinguish different hardware models which are not
+ * uniquely identifiable through their E7 responses.
+ * @proto_version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ * known format for this model. The first byte of the report, ANDed with
+ * mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ *
+ * Many (but not all) ALPS touchpads can be identified by looking at the
+ * values returned in the "E7 report" and/or the "EC report." This table
+ * lists a number of such touchpads.
+ */
struct alps_model_info {
- unsigned char signature[3];
- unsigned char command_mode_resp; /* v3/v4 only */
+ unsigned char signature[3];
+ unsigned char command_mode_resp;
unsigned char proto_version;
- unsigned char byte0, mask0;
- unsigned char flags;
+ unsigned char byte0, mask0;
+ unsigned char flags;
};
+/**
+ * struct alps_nibble_commands - encodings for register accesses
+ * @command: PS/2 command used for the nibble
+ * @data: Data supplied as an argument to the PS/2 command, if applicable
+ *
+ * The ALPS protocol uses magic sequences to transmit binary data to the
+ * touchpad, as it is generally not OK to send arbitrary bytes out the
+ * PS/2 port. Each of the sequences in this table sends one nibble of the
+ * register address or (write) data. Different versions of the ALPS protocol
+ * use slightly different encodings.
+ */
struct alps_nibble_commands {
int command;
unsigned char data;
};
+/**
+ * struct alps_data - private data structure for the ALPS driver
+ * @dev2: "Relative" device used to report trackstick or mouse activity.
+ * @phys: Physical path for the relative device.
+ * @i: Information on the detected touchpad model.
+ * @nibble_commands: Command mapping used for touchpad register accesses.
+ * @addr_command: Command used to tell the touchpad that a register address
+ * follows.
+ * @prev_fin: Finger bit from previous packet.
+ * @multi_packet: Multi-packet data in progress.
+ * @multi_data: Saved multi-packet data.
+ * @x1: First X coordinate from last MT report.
+ * @x2: Second X coordinate from last MT report.
+ * @y1: First Y coordinate from last MT report.
+ * @y2: Second Y coordinate from last MT report.
+ * @fingers: Number of fingers from last MT report.
+ * @quirks: Bitmap of ALPS_QUIRK_*.
+ * @timer: Timer for flushing out the final report packet in the stream.
+ */
struct alps_data {
- struct input_dev *dev2; /* Relative device */
- char phys[32]; /* Phys */
- const struct alps_model_info *i;/* Info */
+ struct input_dev *dev2;
+ char phys[32];
+ const struct alps_model_info *i;
const struct alps_nibble_commands *nibble_commands;
- int addr_command; /* Command to set register address */
- int prev_fin; /* Finger bit from previous packet */
- int multi_packet; /* Multi-packet data in progress */
- unsigned char multi_data[6]; /* Saved multi-packet data */
- int x1, x2, y1, y2; /* Coordinates from last MT report */
- int fingers; /* Number of fingers from MT report */
+ int addr_command;
+ int prev_fin;
+ int multi_packet;
+ unsigned char multi_data[6];
+ int x1, x2, y1, y2;
+ int fingers;
u8 quirks;
struct timer_list timer;
};
--
1.8.1.2
From 196069863604cb55061a02ad5f046c5e4054ba54 Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 20:56:33 -0800
Subject: [PATCH 02/15] Input: ALPS - copy "model" info into alps_data struct
Not every type of ALPS touchpad is well-suited to table-based detection.
Start moving the various alps_model_data attributes into the alps_data
struct so that we don't need a unique table entry for every possible
permutation of protocol version, flags, byte0/mask0, etc.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 63 +++++++++++++++++++++++-----------------------
drivers/input/mouse/alps.h | 14 +++++++++--
2 files changed, 43 insertions(+), 34 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index e229fa3..33ee6e0 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -122,10 +122,10 @@ static const struct alps_model_info alps_model_data[] = {
/* Packet formats are described in Documentation/input/alps.txt */
-static bool alps_is_valid_first_byte(const struct alps_model_info *model,
+static bool alps_is_valid_first_byte(struct alps_data *priv,
unsigned char data)
{
- return (data & model->mask0) == model->byte0;
+ return (data & priv->mask0) == priv->byte0;
}
static void alps_report_buttons(struct psmouse *psmouse,
@@ -158,14 +158,13 @@ static void alps_report_buttons(struct psmouse *psmouse,
static void alps_process_packet_v1_v2(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
- const struct alps_model_info *model = priv->i;
unsigned char *packet = psmouse->packet;
struct input_dev *dev = psmouse->dev;
struct input_dev *dev2 = priv->dev2;
int x, y, z, ges, fin, left, right, middle;
int back = 0, forward = 0;
- if (model->proto_version == ALPS_PROTO_V1) {
+ if (priv->proto_version == ALPS_PROTO_V1) {
left = packet[2] & 0x10;
right = packet[2] & 0x08;
middle = 0;
@@ -181,12 +180,12 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
z = packet[5];
}
- if (model->flags & ALPS_FW_BK_1) {
+ if (priv->flags & ALPS_FW_BK_1) {
back = packet[0] & 0x10;
forward = packet[2] & 4;
}
- if (model->flags & ALPS_FW_BK_2) {
+ if (priv->flags & ALPS_FW_BK_2) {
back = packet[3] & 4;
forward = packet[2] & 4;
if ((middle = forward && back))
@@ -196,7 +195,7 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
ges = packet[2] & 1;
fin = packet[2] & 2;
- if ((model->flags & ALPS_DUALPOINT) && z == 127) {
+ if ((priv->flags & ALPS_DUALPOINT) && z == 127) {
input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x));
input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
@@ -239,15 +238,15 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
input_report_abs(dev, ABS_PRESSURE, z);
input_report_key(dev, BTN_TOOL_FINGER, z > 0);
- if (model->flags & ALPS_WHEEL)
+ if (priv->flags & ALPS_WHEEL)
input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07));
- if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
+ if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
input_report_key(dev, BTN_FORWARD, forward);
input_report_key(dev, BTN_BACK, back);
}
- if (model->flags & ALPS_FOUR_BUTTONS) {
+ if (priv->flags & ALPS_FOUR_BUTTONS) {
input_report_key(dev, BTN_0, packet[2] & 4);
input_report_key(dev, BTN_1, packet[0] & 0x10);
input_report_key(dev, BTN_2, packet[3] & 4);
@@ -699,9 +698,8 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
static void alps_process_packet(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
- const struct alps_model_info *model = priv->i;
- switch (model->proto_version) {
+ switch (priv->proto_version) {
case ALPS_PROTO_V1:
case ALPS_PROTO_V2:
alps_process_packet_v1_v2(psmouse);
@@ -765,7 +763,7 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
if (((psmouse->packet[3] |
psmouse->packet[4] |
psmouse->packet[5]) & 0x80) ||
- (!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) {
+ (!alps_is_valid_first_byte(priv, psmouse->packet[6]))) {
psmouse_dbg(psmouse,
"refusing packet %4ph (suspected interleaved ps/2)\n",
psmouse->packet + 3);
@@ -844,7 +842,6 @@ static void alps_flush_packet(unsigned long data)
static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
- const struct alps_model_info *model = priv->i;
if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */
if (psmouse->pktcnt == 3) {
@@ -857,15 +854,15 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
/* Check for PS/2 packet stuffed in the middle of ALPS packet. */
- if ((model->flags & ALPS_PS2_INTERLEAVED) &&
+ if ((priv->flags & ALPS_PS2_INTERLEAVED) &&
psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) {
return alps_handle_interleaved_ps2(psmouse);
}
- if (!alps_is_valid_first_byte(model, psmouse->packet[0])) {
+ if (!alps_is_valid_first_byte(priv, psmouse->packet[0])) {
psmouse_dbg(psmouse,
"refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
- psmouse->packet[0], model->mask0, model->byte0);
+ psmouse->packet[0], priv->mask0, priv->byte0);
return PSMOUSE_BAD_DATA;
}
@@ -1190,16 +1187,16 @@ static int alps_poll(struct psmouse *psmouse)
unsigned char buf[sizeof(psmouse->packet)];
bool poll_failed;
- if (priv->i->flags & ALPS_PASS)
+ if (priv->flags & ALPS_PASS)
alps_passthrough_mode_v2(psmouse, true);
poll_failed = ps2_command(&psmouse->ps2dev, buf,
PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0;
- if (priv->i->flags & ALPS_PASS)
+ if (priv->flags & ALPS_PASS)
alps_passthrough_mode_v2(psmouse, false);
- if (poll_failed || (buf[0] & priv->i->mask0) != priv->i->byte0)
+ if (poll_failed || (buf[0] & priv->mask0) != priv->byte0)
return -1;
if ((psmouse->badbyte & 0xc8) == 0x08) {
@@ -1217,9 +1214,8 @@ static int alps_poll(struct psmouse *psmouse)
static int alps_hw_init_v1_v2(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
- const struct alps_model_info *model = priv->i;
- if ((model->flags & ALPS_PASS) &&
+ if ((priv->flags & ALPS_PASS) &&
alps_passthrough_mode_v2(psmouse, true)) {
return -1;
}
@@ -1234,7 +1230,7 @@ static int alps_hw_init_v1_v2(struct psmouse *psmouse)
return -1;
}
- if ((model->flags & ALPS_PASS) &&
+ if ((priv->flags & ALPS_PASS) &&
alps_passthrough_mode_v2(psmouse, false)) {
return -1;
}
@@ -1520,10 +1516,9 @@ error:
static int alps_hw_init(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
- const struct alps_model_info *model = priv->i;
int ret = -1;
- switch (model->proto_version) {
+ switch (priv->proto_version) {
case ALPS_PROTO_V1:
case ALPS_PROTO_V2:
ret = alps_hw_init_v1_v2(psmouse);
@@ -1585,7 +1580,10 @@ int alps_init(struct psmouse *psmouse)
if (!model)
goto init_fail;
- priv->i = model;
+ priv->proto_version = model->proto_version;
+ priv->byte0 = model->byte0;
+ priv->mask0 = model->mask0;
+ priv->flags = model->flags;
if (alps_hw_init(psmouse))
goto init_fail;
@@ -1609,7 +1607,7 @@ int alps_init(struct psmouse *psmouse)
dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
- switch (model->proto_version) {
+ switch (priv->proto_version) {
case ALPS_PROTO_V1:
case ALPS_PROTO_V2:
input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
@@ -1633,17 +1631,17 @@ int alps_init(struct psmouse *psmouse)
input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
- if (model->flags & ALPS_WHEEL) {
+ if (priv->flags & ALPS_WHEEL) {
dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL);
}
- if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
+ if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD);
dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK);
}
- if (model->flags & ALPS_FOUR_BUTTONS) {
+ if (priv->flags & ALPS_FOUR_BUTTONS) {
dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0);
dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1);
dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2);
@@ -1654,7 +1652,8 @@ int alps_init(struct psmouse *psmouse)
snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys);
dev2->phys = priv->phys;
- dev2->name = (model->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
+ dev2->name = (priv->flags & ALPS_DUALPOINT) ?
+ "DualPoint Stick" : "PS/2 Mouse";
dev2->id.bustype = BUS_I8042;
dev2->id.vendor = 0x0002;
dev2->id.product = PSMOUSE_ALPS;
@@ -1673,7 +1672,7 @@ int alps_init(struct psmouse *psmouse)
psmouse->poll = alps_poll;
psmouse->disconnect = alps_disconnect;
psmouse->reconnect = alps_reconnect;
- psmouse->pktsize = model->proto_version == ALPS_PROTO_V4 ? 8 : 6;
+ psmouse->pktsize = priv->proto_version == ALPS_PROTO_V4 ? 8 : 6;
/* We are having trouble resyncing ALPS touchpads so disable it for now */
psmouse->resync_time = 0;
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 67be4e5..efd0eea 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -63,10 +63,15 @@ struct alps_nibble_commands {
* struct alps_data - private data structure for the ALPS driver
* @dev2: "Relative" device used to report trackstick or mouse activity.
* @phys: Physical path for the relative device.
- * @i: Information on the detected touchpad model.
* @nibble_commands: Command mapping used for touchpad register accesses.
* @addr_command: Command used to tell the touchpad that a register address
* follows.
+ * @proto_version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ * known format for this model. The first byte of the report, ANDed with
+ * mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
* @prev_fin: Finger bit from previous packet.
* @multi_packet: Multi-packet data in progress.
* @multi_data: Saved multi-packet data.
@@ -81,9 +86,14 @@ struct alps_nibble_commands {
struct alps_data {
struct input_dev *dev2;
char phys[32];
- const struct alps_model_info *i;
+
+ /* these are autodetected when the device is identified */
const struct alps_nibble_commands *nibble_commands;
int addr_command;
+ unsigned char proto_version;
+ unsigned char byte0, mask0;
+ unsigned char flags;
+
int prev_fin;
int multi_packet;
unsigned char multi_data[6];
--
1.8.1.2
From b856c913996a38ced60bdf41aeae4da00882bf1f Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 20:57:04 -0800
Subject: [PATCH 03/15] Input: ALPS - move alps_get_model() down below hw_init
code
This will minimize the number of forward declarations needed when
alps_get_model() starts assigning function pointers.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 186 ++++++++++++++++++++++-----------------------
1 file changed, 93 insertions(+), 93 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 33ee6e0..c473549 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -998,99 +998,6 @@ static inline int alps_exit_command_mode(struct psmouse *psmouse)
return 0;
}
-static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version)
-{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 };
- unsigned char param[4];
- const struct alps_model_info *model = NULL;
- int i;
-
- /*
- * First try "E6 report".
- * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed.
- * The bits 0-2 of the first byte will be 1s if some buttons are
- * pressed.
- */
- param[0] = 0;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11))
- return NULL;
-
- param[0] = param[1] = param[2] = 0xff;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
- return NULL;
-
- psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x",
- param[0], param[1], param[2]);
-
- if ((param[0] & 0xf8) != 0 || param[1] != 0 ||
- (param[2] != 10 && param[2] != 100))
- return NULL;
-
- /*
- * Now try "E7 report". Allowed responses are in
- * alps_model_data[].signature
- */
- param[0] = 0;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21))
- return NULL;
-
- param[0] = param[1] = param[2] = 0xff;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
- return NULL;
-
- psmouse_dbg(psmouse, "E7 report: %2.2x %2.2x %2.2x",
- param[0], param[1], param[2]);
-
- if (version) {
- for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
- /* empty */;
- *version = (param[0] << 8) | (param[1] << 4) | i;
- }
-
- for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
- if (!memcmp(param, alps_model_data[i].signature,
- sizeof(alps_model_data[i].signature))) {
- model = alps_model_data + i;
- break;
- }
- }
-
- if (model && model->proto_version > ALPS_PROTO_V2) {
- /*
- * Need to check command mode response to identify
- * model
- */
- model = NULL;
- if (alps_enter_command_mode(psmouse, param)) {
- psmouse_warn(psmouse,
- "touchpad failed to enter command mode\n");
- } else {
- for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
- if (alps_model_data[i].proto_version > ALPS_PROTO_V2 &&
- alps_model_data[i].command_mode_resp == param[0]) {
- model = alps_model_data + i;
- break;
- }
- }
- alps_exit_command_mode(psmouse);
-
- if (!model)
- psmouse_dbg(psmouse,
- "Unknown command mode response %2.2x\n",
- param[0]);
- }
- }
-
- return model;
-}
-
/*
* For DualPoint devices select the device that should respond to
* subsequent commands. It looks like glidepad is behind stickpointer,
@@ -1534,6 +1441,99 @@ static int alps_hw_init(struct psmouse *psmouse)
return ret;
}
+static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 };
+ unsigned char param[4];
+ const struct alps_model_info *model = NULL;
+ int i;
+
+ /*
+ * First try "E6 report".
+ * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed.
+ * The bits 0-2 of the first byte will be 1s if some buttons are
+ * pressed.
+ */
+ param[0] = 0;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11))
+ return NULL;
+
+ param[0] = param[1] = param[2] = 0xff;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+ return NULL;
+
+ psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x",
+ param[0], param[1], param[2]);
+
+ if ((param[0] & 0xf8) != 0 || param[1] != 0 ||
+ (param[2] != 10 && param[2] != 100))
+ return NULL;
+
+ /*
+ * Now try "E7 report". Allowed responses are in
+ * alps_model_data[].signature
+ */
+ param[0] = 0;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21))
+ return NULL;
+
+ param[0] = param[1] = param[2] = 0xff;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+ return NULL;
+
+ psmouse_dbg(psmouse, "E7 report: %2.2x %2.2x %2.2x",
+ param[0], param[1], param[2]);
+
+ if (version) {
+ for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
+ /* empty */;
+ *version = (param[0] << 8) | (param[1] << 4) | i;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
+ if (!memcmp(param, alps_model_data[i].signature,
+ sizeof(alps_model_data[i].signature))) {
+ model = alps_model_data + i;
+ break;
+ }
+ }
+
+ if (model && model->proto_version > ALPS_PROTO_V2) {
+ /*
+ * Need to check command mode response to identify
+ * model
+ */
+ model = NULL;
+ if (alps_enter_command_mode(psmouse, param)) {
+ psmouse_warn(psmouse,
+ "touchpad failed to enter command mode\n");
+ } else {
+ for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
+ if (alps_model_data[i].proto_version > ALPS_PROTO_V2 &&
+ alps_model_data[i].command_mode_resp == param[0]) {
+ model = alps_model_data + i;
+ break;
+ }
+ }
+ alps_exit_command_mode(psmouse);
+
+ if (!model)
+ psmouse_dbg(psmouse,
+ "Unknown command mode response %2.2x\n",
+ param[0]);
+ }
+ }
+
+ return model;
+}
+
static int alps_reconnect(struct psmouse *psmouse)
{
const struct alps_model_info *model;
--
1.8.1.2
From b719d56d5743e2c338568f4edb6eab17ea9c9eec Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 22:19:01 -0800
Subject: [PATCH 04/15] Input: ALPS - introduce helper function for repeated
commands
Several ALPS driver init sequences repeat a command three times, then
issue PSMOUSE_CMD_GETINFO to read the result. Move this into a helper
function to simplify the code.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 71 ++++++++++++++++++++--------------------------
1 file changed, 30 insertions(+), 41 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index c473549..1ca854b 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -964,24 +964,42 @@ static int alps_command_mode_write_reg(struct psmouse *psmouse, int addr,
return __alps_command_mode_write_reg(psmouse, value);
}
+static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,
+ int repeated_command, unsigned char *param)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+ param[0] = 0;
+ if (init_command && ps2_command(ps2dev, param, init_command))
+ return -EIO;
+
+ if (ps2_command(ps2dev, NULL, repeated_command) ||
+ ps2_command(ps2dev, NULL, repeated_command) ||
+ ps2_command(ps2dev, NULL, repeated_command))
+ return -EIO;
+
+ param[0] = param[1] = param[2] = 0xff;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+ return -EIO;
+
+ psmouse_dbg(psmouse, "%2.2X report: %2.2x %2.2x %2.2x\n",
+ repeated_command, param[0], param[1], param[2]);
+ return 0;
+}
+
static int alps_enter_command_mode(struct psmouse *psmouse,
unsigned char *resp)
{
unsigned char param[4];
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
- ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+ if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_RESET_WRAP, param)) {
psmouse_err(psmouse, "failed to enter command mode\n");
return -1;
}
if (param[0] != 0x88 && param[1] != 0x07) {
psmouse_dbg(psmouse,
- "unknown response while entering command mode: %2.2x %2.2x %2.2x\n",
- param[0], param[1], param[2]);
+ "unknown response while entering command mode\n");
return -1;
}
@@ -1041,18 +1059,10 @@ static int alps_absolute_mode_v1_v2(struct psmouse *psmouse)
static int alps_get_status(struct psmouse *psmouse, char *param)
{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
-
/* Get status: 0xF5 0xF5 0xF5 0xE9 */
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+ if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_DISABLE, param))
return -1;
- psmouse_dbg(psmouse, "Status: %2.2x %2.2x %2.2x",
- param[0], param[1], param[2]);
-
return 0;
}
@@ -1443,7 +1453,6 @@ static int alps_hw_init(struct psmouse *psmouse)
static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version)
{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 };
unsigned char param[4];
const struct alps_model_info *model = NULL;
@@ -1455,20 +1464,10 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int
* The bits 0-2 of the first byte will be 1s if some buttons are
* pressed.
*/
- param[0] = 0;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11))
- return NULL;
-
- param[0] = param[1] = param[2] = 0xff;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, PSMOUSE_CMD_SETSCALE11,
+ param))
return NULL;
- psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x",
- param[0], param[1], param[2]);
-
if ((param[0] & 0xf8) != 0 || param[1] != 0 ||
(param[2] != 10 && param[2] != 100))
return NULL;
@@ -1477,20 +1476,10 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int
* Now try "E7 report". Allowed responses are in
* alps_model_data[].signature
*/
- param[0] = 0;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21))
- return NULL;
-
- param[0] = param[1] = param[2] = 0xff;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, PSMOUSE_CMD_SETSCALE21,
+ param))
return NULL;
- psmouse_dbg(psmouse, "E7 report: %2.2x %2.2x %2.2x",
- param[0], param[1], param[2]);
-
if (version) {
for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
/* empty */;
--
1.8.1.2
From c7fd5d0e90f577072ece70651aeecb37f62f5fdb Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 22:19:59 -0800
Subject: [PATCH 05/15] Input: ALPS - rework detection sequence
If the E6 report test passes, get the E7 and EC reports right away and
then try to match an entry in the table.
Pass in the alps_data struct, so that the detection code will be able to
set operating parameters based on information found during detection.
Change the version (psmouse->model) to report the protocol version only,
in preparation for supporting models that do not show up in the ID table.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 124 +++++++++++++++++++--------------------------
drivers/input/mouse/alps.h | 8 +--
2 files changed, 56 insertions(+), 76 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 1ca854b..e6a27a5 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -1451,86 +1451,76 @@ static int alps_hw_init(struct psmouse *psmouse)
return ret;
}
-static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version)
+static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv,
+ unsigned char *e7, unsigned char *ec)
{
- static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 };
- unsigned char param[4];
- const struct alps_model_info *model = NULL;
+ const struct alps_model_info *model;
int i;
+ for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
+ model = &alps_model_data[i];
+
+ if (!memcmp(e7, model->signature, sizeof(model->signature)) &&
+ (!model->command_mode_resp ||
+ model->command_mode_resp == ec[2])) {
+
+ priv->proto_version = model->proto_version;
+ priv->flags = model->flags;
+ priv->byte0 = model->byte0;
+ priv->mask0 = model->mask0;
+
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
+{
+ unsigned char e6[4], e7[4], ec[4];
+
/*
* First try "E6 report".
* ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed.
* The bits 0-2 of the first byte will be 1s if some buttons are
* pressed.
*/
- if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, PSMOUSE_CMD_SETSCALE11,
- param))
- return NULL;
+ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
+ PSMOUSE_CMD_SETSCALE11, e6))
+ return -EIO;
- if ((param[0] & 0xf8) != 0 || param[1] != 0 ||
- (param[2] != 10 && param[2] != 100))
- return NULL;
+ if ((e6[0] & 0xf8) != 0 || e6[1] != 0 || (e6[2] != 10 && e6[2] != 100))
+ return -EINVAL;
/*
- * Now try "E7 report". Allowed responses are in
- * alps_model_data[].signature
+ * Now get the "E7" and "EC" reports. These will uniquely identify
+ * most ALPS touchpads.
*/
- if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, PSMOUSE_CMD_SETSCALE21,
- param))
- return NULL;
-
- if (version) {
- for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
- /* empty */;
- *version = (param[0] << 8) | (param[1] << 4) | i;
- }
-
- for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
- if (!memcmp(param, alps_model_data[i].signature,
- sizeof(alps_model_data[i].signature))) {
- model = alps_model_data + i;
- break;
- }
- }
+ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
+ PSMOUSE_CMD_SETSCALE21, e7) ||
+ alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
+ PSMOUSE_CMD_RESET_WRAP, ec) ||
+ alps_exit_command_mode(psmouse))
+ return -EIO;
- if (model && model->proto_version > ALPS_PROTO_V2) {
- /*
- * Need to check command mode response to identify
- * model
- */
- model = NULL;
- if (alps_enter_command_mode(psmouse, param)) {
- psmouse_warn(psmouse,
- "touchpad failed to enter command mode\n");
- } else {
- for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
- if (alps_model_data[i].proto_version > ALPS_PROTO_V2 &&
- alps_model_data[i].command_mode_resp == param[0]) {
- model = alps_model_data + i;
- break;
- }
- }
- alps_exit_command_mode(psmouse);
+ if (alps_match_table(psmouse, priv, e7, ec) == 0)
+ return 0;
- if (!model)
- psmouse_dbg(psmouse,
- "Unknown command mode response %2.2x\n",
- param[0]);
- }
- }
+ psmouse_info(psmouse,
+ "Unknown ALPS touchpad: E7=%2.2x %2.2x %2.2x, EC=%2.2x %2.2x %2.2x\n",
+ e7[0], e7[1], e7[2], ec[0], ec[1], ec[2]);
- return model;
+ return -EINVAL;
}
static int alps_reconnect(struct psmouse *psmouse)
{
- const struct alps_model_info *model;
+ struct alps_data *priv = psmouse->private;
psmouse_reset(psmouse);
- model = alps_get_model(psmouse, NULL);
- if (!model)
+ if (alps_identify(psmouse, priv) < 0)
return -1;
return alps_hw_init(psmouse);
@@ -1549,9 +1539,7 @@ static void alps_disconnect(struct psmouse *psmouse)
int alps_init(struct psmouse *psmouse)
{
struct alps_data *priv;
- const struct alps_model_info *model;
struct input_dev *dev1 = psmouse->dev, *dev2;
- int version;
priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL);
dev2 = input_allocate_device();
@@ -1565,15 +1553,9 @@ int alps_init(struct psmouse *psmouse)
psmouse_reset(psmouse);
- model = alps_get_model(psmouse, &version);
- if (!model)
+ if (alps_identify(psmouse, priv) < 0)
goto init_fail;
- priv->proto_version = model->proto_version;
- priv->byte0 = model->byte0;
- priv->mask0 = model->mask0;
- priv->flags = model->flags;
-
if (alps_hw_init(psmouse))
goto init_fail;
@@ -1678,18 +1660,16 @@ init_fail:
int alps_detect(struct psmouse *psmouse, bool set_properties)
{
- int version;
- const struct alps_model_info *model;
+ struct alps_data dummy;
- model = alps_get_model(psmouse, &version);
- if (!model)
+ if (alps_identify(psmouse, &dummy) < 0)
return -1;
if (set_properties) {
psmouse->vendor = "ALPS";
- psmouse->name = model->flags & ALPS_DUALPOINT ?
+ psmouse->name = dummy.flags & ALPS_DUALPOINT ?
"DualPoint TouchPad" : "GlidePoint";
- psmouse->model = version;
+ psmouse->model = dummy.proto_version << 8;
}
return 0;
}
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index efd0eea..a81b318 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -12,10 +12,10 @@
#ifndef _ALPS_H
#define _ALPS_H
-#define ALPS_PROTO_V1 0
-#define ALPS_PROTO_V2 1
-#define ALPS_PROTO_V3 2
-#define ALPS_PROTO_V4 3
+#define ALPS_PROTO_V1 1
+#define ALPS_PROTO_V2 2
+#define ALPS_PROTO_V3 3
+#define ALPS_PROTO_V4 4
/**
* struct alps_model_info - touchpad ID table
--
1.8.1.2
From c7fb8a63ba1257e2ee829425ef7197c7cbe893a1 Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 22:22:08 -0800
Subject: [PATCH 06/15] Input: ALPS - use function pointers for different
protocol handlers
In anticipation of adding more ALPS protocols and more per-device quirks,
use function pointers instead of switch statements to call functions that
differ from one device to the next.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 101 +++++++++++++++++++++------------------------
drivers/input/mouse/alps.h | 7 ++++
2 files changed, 54 insertions(+), 54 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index e6a27a5..fe45687 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -114,6 +114,11 @@ static const struct alps_model_info alps_model_data[] = {
{ { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
};
+static void alps_set_abs_params_st(struct alps_data *priv,
+ struct input_dev *dev1);
+static void alps_set_abs_params_mt(struct alps_data *priv,
+ struct input_dev *dev1);
+
/*
* XXX - this entry is suspicious. First byte has zero lower nibble,
* which is what a normal mouse would report. Also, the value 0x0e
@@ -695,24 +700,6 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
input_sync(dev);
}
-static void alps_process_packet(struct psmouse *psmouse)
-{
- struct alps_data *priv = psmouse->private;
-
- switch (priv->proto_version) {
- case ALPS_PROTO_V1:
- case ALPS_PROTO_V2:
- alps_process_packet_v1_v2(psmouse);
- break;
- case ALPS_PROTO_V3:
- alps_process_packet_v3(psmouse);
- break;
- case ALPS_PROTO_V4:
- alps_process_packet_v4(psmouse);
- break;
- }
-}
-
static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
unsigned char packet[],
bool report_buttons)
@@ -770,7 +757,7 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
return PSMOUSE_BAD_DATA;
}
- alps_process_packet(psmouse);
+ priv->process_packet(psmouse);
/* Continue with the next packet */
psmouse->packet[0] = psmouse->packet[6];
@@ -814,6 +801,7 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
static void alps_flush_packet(unsigned long data)
{
struct psmouse *psmouse = (struct psmouse *)data;
+ struct alps_data *priv = psmouse->private;
serio_pause_rx(psmouse->ps2dev.serio);
@@ -831,7 +819,7 @@ static void alps_flush_packet(unsigned long data)
"refusing packet %3ph (suspected interleaved ps/2)\n",
psmouse->packet + 3);
} else {
- alps_process_packet(psmouse);
+ priv->process_packet(psmouse);
}
psmouse->pktcnt = 0;
}
@@ -876,7 +864,7 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
}
if (psmouse->pktcnt == psmouse->pktsize) {
- alps_process_packet(psmouse);
+ priv->process_packet(psmouse);
return PSMOUSE_FULL_PACKET;
}
@@ -1430,25 +1418,26 @@ error:
return -1;
}
-static int alps_hw_init(struct psmouse *psmouse)
+static void alps_set_defaults(struct alps_data *priv)
{
- struct alps_data *priv = psmouse->private;
- int ret = -1;
-
switch (priv->proto_version) {
case ALPS_PROTO_V1:
case ALPS_PROTO_V2:
- ret = alps_hw_init_v1_v2(psmouse);
+ priv->hw_init = alps_hw_init_v1_v2;
+ priv->process_packet = alps_process_packet_v1_v2;
+ priv->set_abs_params = alps_set_abs_params_st;
break;
case ALPS_PROTO_V3:
- ret = alps_hw_init_v3(psmouse);
+ priv->hw_init = alps_hw_init_v3;
+ priv->process_packet = alps_process_packet_v3;
+ priv->set_abs_params = alps_set_abs_params_mt;
break;
case ALPS_PROTO_V4:
- ret = alps_hw_init_v4(psmouse);
+ priv->hw_init = alps_hw_init_v4;
+ priv->process_packet = alps_process_packet_v4;
+ priv->set_abs_params = alps_set_abs_params_mt;
break;
}
-
- return ret;
}
static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv,
@@ -1465,6 +1454,8 @@ static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv,
model->command_mode_resp == ec[2])) {
priv->proto_version = model->proto_version;
+ alps_set_defaults(priv);
+
priv->flags = model->flags;
priv->byte0 = model->byte0;
priv->mask0 = model->mask0;
@@ -1523,7 +1514,7 @@ static int alps_reconnect(struct psmouse *psmouse)
if (alps_identify(psmouse, priv) < 0)
return -1;
- return alps_hw_init(psmouse);
+ return priv->hw_init(psmouse);
}
static void alps_disconnect(struct psmouse *psmouse)
@@ -1536,6 +1527,29 @@ static void alps_disconnect(struct psmouse *psmouse)
kfree(priv);
}
+static void alps_set_abs_params_st(struct alps_data *priv,
+ struct input_dev *dev1)
+{
+ input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
+}
+
+static void alps_set_abs_params_mt(struct alps_data *priv,
+ struct input_dev *dev1)
+{
+ set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
+ input_mt_init_slots(dev1, 2, 0);
+ input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0);
+ input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0);
+
+ set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
+ set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
+ set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
+
+ input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0);
+}
+
int alps_init(struct psmouse *psmouse)
{
struct alps_data *priv;
@@ -1556,7 +1570,7 @@ int alps_init(struct psmouse *psmouse)
if (alps_identify(psmouse, priv) < 0)
goto init_fail;
- if (alps_hw_init(psmouse))
+ if (priv->hw_init(psmouse))
goto init_fail;
/*
@@ -1578,28 +1592,7 @@ int alps_init(struct psmouse *psmouse)
dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
- switch (priv->proto_version) {
- case ALPS_PROTO_V1:
- case ALPS_PROTO_V2:
- input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
- input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
- break;
- case ALPS_PROTO_V3:
- case ALPS_PROTO_V4:
- set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
- input_mt_init_slots(dev1, 2, 0);
- input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0);
- input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0);
-
- set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
- set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
- set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
-
- input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0);
- input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0);
- break;
- }
-
+ priv->set_abs_params(priv, dev1);
input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
if (priv->flags & ALPS_WHEEL) {
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index a81b318..0934f8b 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -72,6 +72,9 @@ struct alps_nibble_commands {
* mask0, should match byte0.
* @mask0: The mask used to check the first byte of the report.
* @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ * @hw_init: Protocol-specific hardware init function.
+ * @process_packet: Protocol-specific function to process a report packet.
+ * @set_abs_params: Protocol-specific function to configure the input_dev.
* @prev_fin: Finger bit from previous packet.
* @multi_packet: Multi-packet data in progress.
* @multi_data: Saved multi-packet data.
@@ -94,6 +97,10 @@ struct alps_data {
unsigned char byte0, mask0;
unsigned char flags;
+ int (*hw_init)(struct psmouse *psmouse);
+ void (*process_packet)(struct psmouse *psmouse);
+ void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
+
int prev_fin;
int multi_packet;
unsigned char multi_data[6];
--
1.8.1.2
From e2600c708bef8e1c8126ca9b8d4ce1f83c002688 Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 22:23:04 -0800
Subject: [PATCH 07/15] Input: ALPS - move {addr,nibble}_command settings into
alps_set_defaults()
This allows alps_identify() to override these settings based on the
device characteristics, if it is ever necessary.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index fe45687..2221a00 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -1190,14 +1190,10 @@ static int alps_absolute_mode_v3(struct psmouse *psmouse)
static int alps_hw_init_v3(struct psmouse *psmouse)
{
- struct alps_data *priv = psmouse->private;
struct ps2dev *ps2dev = &psmouse->ps2dev;
int reg_val;
unsigned char param[4];
- priv->nibble_commands = alps_v3_nibble_commands;
- priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
-
if (alps_enter_command_mode(psmouse, NULL))
goto error;
@@ -1343,13 +1339,9 @@ static int alps_absolute_mode_v4(struct psmouse *psmouse)
static int alps_hw_init_v4(struct psmouse *psmouse)
{
- struct alps_data *priv = psmouse->private;
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[4];
- priv->nibble_commands = alps_v4_nibble_commands;
- priv->addr_command = PSMOUSE_CMD_DISABLE;
-
if (alps_enter_command_mode(psmouse, NULL))
goto error;
@@ -1431,11 +1423,15 @@ static void alps_set_defaults(struct alps_data *priv)
priv->hw_init = alps_hw_init_v3;
priv->process_packet = alps_process_packet_v3;
priv->set_abs_params = alps_set_abs_params_mt;
+ priv->nibble_commands = alps_v3_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
break;
case ALPS_PROTO_V4:
priv->hw_init = alps_hw_init_v4;
priv->process_packet = alps_process_packet_v4;
priv->set_abs_params = alps_set_abs_params_mt;
+ priv->nibble_commands = alps_v4_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_DISABLE;
break;
}
}
--
1.8.1.2
From df0bf385112a7b38c5c3d307bb9399f9f3b3bba2 Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 22:23:34 -0800
Subject: [PATCH 08/15] Input: ALPS - rework detection of Pinnacle AGx
touchpads
The official ALPS driver uses the EC report, not the E7 report, to detect
these devices. Also, they check for a range of values; the original
table-based code only checked for two specific ones.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 2221a00..eafeae2 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -109,8 +109,6 @@ static const struct alps_model_info alps_model_data[] = {
{ { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
{ { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
- { { 0x73, 0x02, 0x64 }, 0x9b, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
- { { 0x73, 0x02, 0x64 }, 0x9d, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
{ { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
};
@@ -1412,6 +1410,10 @@ error:
static void alps_set_defaults(struct alps_data *priv)
{
+ priv->byte0 = 0x8f;
+ priv->mask0 = 0x8f;
+ priv->flags = ALPS_DUALPOINT;
+
switch (priv->proto_version) {
case ALPS_PROTO_V1:
case ALPS_PROTO_V2:
@@ -1491,8 +1493,15 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
alps_exit_command_mode(psmouse))
return -EIO;
- if (alps_match_table(psmouse, priv, e7, ec) == 0)
+ if (alps_match_table(psmouse, priv, e7, ec) == 0) {
+ return 0;
+ } else if (ec[0] == 0x88 && ec[1] == 0x07 &&
+ ec[2] >= 0x90 && ec[2] <= 0x9d) {
+ priv->proto_version = ALPS_PROTO_V3;
+ alps_set_defaults(priv);
+
return 0;
+ }
psmouse_info(psmouse,
"Unknown ALPS touchpad: E7=%2.2x %2.2x %2.2x, EC=%2.2x %2.2x %2.2x\n",
--
1.8.1.2
From 8e6493f800dc08a28abd59dfe63790aaade0c700 Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 22:24:22 -0800
Subject: [PATCH 09/15] Input: ALPS - fix command mode check
Pinnacle class devices should return "88 07 xx" or "88 08 xx" when
entering command mode. If either the first byte or the second byte is
invalid, return an error.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index eafeae2..bfc1938 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -983,7 +983,7 @@ static int alps_enter_command_mode(struct psmouse *psmouse,
return -1;
}
- if (param[0] != 0x88 && param[1] != 0x07) {
+ if (param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) {
psmouse_dbg(psmouse,
"unknown response while entering command mode\n");
return -1;
--
1.8.1.2
From 0302b4c4a1b4201bf82a45c46084f3ccd0ee696f Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 22:24:55 -0800
Subject: [PATCH 10/15] Input: ALPS - move pixel and bitmap info into alps_data
struct
Newer touchpads use different constants, so make them runtime-
configurable.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 47 ++++++++++++++++++++++++----------------------
drivers/input/mouse/alps.h | 8 ++++++++
2 files changed, 33 insertions(+), 22 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index bfc1938..2cd8be7 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -27,12 +27,6 @@
/*
* Definitions for ALPS version 3 and 4 command mode protocol
*/
-#define ALPS_V3_X_MAX 2000
-#define ALPS_V3_Y_MAX 1400
-
-#define ALPS_BITMAP_X_BITS 15
-#define ALPS_BITMAP_Y_BITS 11
-
#define ALPS_CMD_NIBBLE_10 0x01f2
static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
@@ -269,7 +263,8 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
* These points are returned in x1, y1, x2, and y2 when the return value
* is greater than 0.
*/
-static int alps_process_bitmap(unsigned int x_map, unsigned int y_map,
+static int alps_process_bitmap(struct alps_data *priv,
+ unsigned int x_map, unsigned int y_map,
int *x1, int *y1, int *x2, int *y2)
{
struct alps_bitmap_point {
@@ -311,7 +306,7 @@ static int alps_process_bitmap(unsigned int x_map, unsigned int y_map,
* y bitmap is reversed for what we need (lower positions are in
* higher bits), so we process from the top end.
*/
- y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - ALPS_BITMAP_Y_BITS);
+ y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - priv->y_bits);
prev_bit = 0;
point = &y_low;
for (i = 0; y_map != 0; i++, y_map <<= 1) {
@@ -357,16 +352,18 @@ static int alps_process_bitmap(unsigned int x_map, unsigned int y_map,
}
}
- *x1 = (ALPS_V3_X_MAX * (2 * x_low.start_bit + x_low.num_bits - 1)) /
- (2 * (ALPS_BITMAP_X_BITS - 1));
- *y1 = (ALPS_V3_Y_MAX * (2 * y_low.start_bit + y_low.num_bits - 1)) /
- (2 * (ALPS_BITMAP_Y_BITS - 1));
+ *x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
+ (2 * (priv->x_bits - 1));
+ *y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
+ (2 * (priv->y_bits - 1));
if (fingers > 1) {
- *x2 = (ALPS_V3_X_MAX * (2 * x_high.start_bit + x_high.num_bits - 1)) /
- (2 * (ALPS_BITMAP_X_BITS - 1));
- *y2 = (ALPS_V3_Y_MAX * (2 * y_high.start_bit + y_high.num_bits - 1)) /
- (2 * (ALPS_BITMAP_Y_BITS - 1));
+ *x2 = (priv->x_max *
+ (2 * x_high.start_bit + x_high.num_bits - 1)) /
+ (2 * (priv->x_bits - 1));
+ *y2 = (priv->y_max *
+ (2 * y_high.start_bit + y_high.num_bits - 1)) /
+ (2 * (priv->y_bits - 1));
}
return fingers;
@@ -484,7 +481,8 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
((packet[2] & 0x7f) << 1) |
(packet[4] & 0x01);
- bmap_fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+ bmap_fingers = alps_process_bitmap(priv,
+ x_bitmap, y_bitmap,
&x1, &y1, &x2, &y2);
/*
@@ -641,7 +639,7 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
((priv->multi_data[3] & 0x1f) << 5) |
(priv->multi_data[1] & 0x1f);
- fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+ fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap,
&x1, &y1, &x2, &y2);
/* Store MT data.*/
@@ -1414,6 +1412,11 @@ static void alps_set_defaults(struct alps_data *priv)
priv->mask0 = 0x8f;
priv->flags = ALPS_DUALPOINT;
+ priv->x_max = 2000;
+ priv->y_max = 1400;
+ priv->x_bits = 15;
+ priv->y_bits = 11;
+
switch (priv->proto_version) {
case ALPS_PROTO_V1:
case ALPS_PROTO_V2:
@@ -1544,15 +1547,15 @@ static void alps_set_abs_params_mt(struct alps_data *priv,
{
set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
input_mt_init_slots(dev1, 2, 0);
- input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0);
- input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0);
+ input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
+ input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
- input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0);
- input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0);
+ input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0);
}
int alps_init(struct psmouse *psmouse)
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 0934f8b..5e638be 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -72,6 +72,10 @@ struct alps_nibble_commands {
* mask0, should match byte0.
* @mask0: The mask used to check the first byte of the report.
* @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ * @x_max: Largest possible X position value.
+ * @y_max: Largest possible Y position value.
+ * @x_bits: Number of X bits in the MT bitmap.
+ * @y_bits: Number of Y bits in the MT bitmap.
* @hw_init: Protocol-specific hardware init function.
* @process_packet: Protocol-specific function to process a report packet.
* @set_abs_params: Protocol-specific function to configure the input_dev.
@@ -96,6 +100,10 @@ struct alps_data {
unsigned char proto_version;
unsigned char byte0, mask0;
unsigned char flags;
+ int x_max;
+ int y_max;
+ int x_bits;
+ int y_bits;
int (*hw_init)(struct psmouse *psmouse);
void (*process_packet)(struct psmouse *psmouse);
--
1.8.1.2
From 3c9d054fef84ccc967445b330ab6012c6b6bd85b Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 22:26:11 -0800
Subject: [PATCH 11/15] Input: ALPS - make the V3 packet field decoder
"pluggable"
A number of different ALPS touchpad protocols can reuse
alps_process_touchpad_packet_v3() with small tweaks to the bitfield
decoding. Create a new priv->decode_fields() callback that handles the
per-model differences.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 101 +++++++++++++++++++++++++--------------------
drivers/input/mouse/alps.h | 38 +++++++++++++++++
2 files changed, 95 insertions(+), 44 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 2cd8be7..270b7de 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -447,17 +447,49 @@ static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
return;
}
+static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p)
+{
+ f->left = !!(p[3] & 0x01);
+ f->right = !!(p[3] & 0x02);
+ f->middle = !!(p[3] & 0x04);
+
+ f->ts_left = !!(p[3] & 0x10);
+ f->ts_right = !!(p[3] & 0x20);
+ f->ts_middle = !!(p[3] & 0x40);
+}
+
+static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p)
+{
+ f->first_mp = !!(p[4] & 0x40);
+ f->is_mp = !!(p[0] & 0x40);
+
+ f->fingers = (p[5] & 0x3) + 1;
+ f->x_map = ((p[4] & 0x7e) << 8) |
+ ((p[1] & 0x7f) << 2) |
+ ((p[0] & 0x30) >> 4);
+ f->y_map = ((p[3] & 0x70) << 4) |
+ ((p[2] & 0x7f) << 1) |
+ (p[4] & 0x01);
+
+ f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
+ ((p[0] & 0x30) >> 4);
+ f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
+ f->z = p[5] & 0x7f;
+
+ alps_decode_buttons_v3(f, p);
+}
+
static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
unsigned char *packet = psmouse->packet;
struct input_dev *dev = psmouse->dev;
struct input_dev *dev2 = priv->dev2;
- int x, y, z;
- int left, right, middle;
int x1 = 0, y1 = 0, x2 = 0, y2 = 0;
int fingers = 0, bmap_fingers;
- unsigned int x_bitmap, y_bitmap;
+ struct alps_fields f;
+
+ priv->decode_fields(&f, packet);
/*
* There's no single feature of touchpad position and bitmap packets
@@ -472,17 +504,10 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
* packet. Check for this, and when it happens process the
* position packet as usual.
*/
- if (packet[0] & 0x40) {
- fingers = (packet[5] & 0x3) + 1;
- x_bitmap = ((packet[4] & 0x7e) << 8) |
- ((packet[1] & 0x7f) << 2) |
- ((packet[0] & 0x30) >> 4);
- y_bitmap = ((packet[3] & 0x70) << 4) |
- ((packet[2] & 0x7f) << 1) |
- (packet[4] & 0x01);
-
+ if (f.is_mp) {
+ fingers = f.fingers;
bmap_fingers = alps_process_bitmap(priv,
- x_bitmap, y_bitmap,
+ f.x_map, f.y_map,
&x1, &y1, &x2, &y2);
/*
@@ -493,7 +518,7 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
fingers = bmap_fingers;
/* Now process position packet */
- packet = priv->multi_data;
+ priv->decode_fields(&f, priv->multi_data);
} else {
priv->multi_packet = 0;
}
@@ -507,10 +532,10 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
* out misidentified bitmap packets, we reject anything with this
* bit set.
*/
- if (packet[0] & 0x40)
+ if (f.is_mp)
return;
- if (!priv->multi_packet && (packet[4] & 0x40)) {
+ if (!priv->multi_packet && f.first_mp) {
priv->multi_packet = 1;
memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
return;
@@ -518,22 +543,13 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
priv->multi_packet = 0;
- left = packet[3] & 0x01;
- right = packet[3] & 0x02;
- middle = packet[3] & 0x04;
-
- x = ((packet[1] & 0x7f) << 4) | ((packet[4] & 0x30) >> 2) |
- ((packet[0] & 0x30) >> 4);
- y = ((packet[2] & 0x7f) << 4) | (packet[4] & 0x0f);
- z = packet[5] & 0x7f;
-
/*
* Sometimes the hardware sends a single packet with z = 0
* in the middle of a stream. Real releases generate packets
* with x, y, and z all zero, so these seem to be flukes.
* Ignore them.
*/
- if (x && y && !z)
+ if (f.x && f.y && !f.z)
return;
/*
@@ -541,12 +557,12 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
* to rely on ST data.
*/
if (!fingers) {
- x1 = x;
- y1 = y;
- fingers = z > 0 ? 1 : 0;
+ x1 = f.x;
+ y1 = f.y;
+ fingers = f.z > 0 ? 1 : 0;
}
- if (z >= 64)
+ if (f.z >= 64)
input_report_key(dev, BTN_TOUCH, 1);
else
input_report_key(dev, BTN_TOUCH, 0);
@@ -555,26 +571,22 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
input_mt_report_finger_count(dev, fingers);
- input_report_key(dev, BTN_LEFT, left);
- input_report_key(dev, BTN_RIGHT, right);
- input_report_key(dev, BTN_MIDDLE, middle);
+ input_report_key(dev, BTN_LEFT, f.left);
+ input_report_key(dev, BTN_RIGHT, f.right);
+ input_report_key(dev, BTN_MIDDLE, f.middle);
- if (z > 0) {
- input_report_abs(dev, ABS_X, x);
- input_report_abs(dev, ABS_Y, y);
+ if (f.z > 0) {
+ input_report_abs(dev, ABS_X, f.x);
+ input_report_abs(dev, ABS_Y, f.y);
}
- input_report_abs(dev, ABS_PRESSURE, z);
+ input_report_abs(dev, ABS_PRESSURE, f.z);
input_sync(dev);
if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
- left = packet[3] & 0x10;
- right = packet[3] & 0x20;
- middle = packet[3] & 0x40;
-
- input_report_key(dev2, BTN_LEFT, left);
- input_report_key(dev2, BTN_RIGHT, right);
- input_report_key(dev2, BTN_MIDDLE, middle);
+ input_report_key(dev2, BTN_LEFT, f.ts_left);
+ input_report_key(dev2, BTN_RIGHT, f.ts_right);
+ input_report_key(dev2, BTN_MIDDLE, f.ts_middle);
input_sync(dev2);
}
}
@@ -1428,6 +1440,7 @@ static void alps_set_defaults(struct alps_data *priv)
priv->hw_init = alps_hw_init_v3;
priv->process_packet = alps_process_packet_v3;
priv->set_abs_params = alps_set_abs_params_mt;
+ priv->decode_fields = alps_decode_pinnacle;
priv->nibble_commands = alps_v3_nibble_commands;
priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
break;
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 5e638be..9704805 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -60,6 +60,42 @@ struct alps_nibble_commands {
};
/**
+ * struct alps_fields - decoded version of the report packet
+ * @x_map: Bitmap of active X positions for MT.
+ * @y_map: Bitmap of active Y positions for MT.
+ * @fingers: Number of fingers for MT.
+ * @x: X position for ST.
+ * @y: Y position for ST.
+ * @z: Z position for ST.
+ * @first_mp: Packet is the first of a multi-packet report.
+ * @is_mp: Packet is part of a multi-packet report.
+ * @left: Left touchpad button is active.
+ * @right: Right touchpad button is active.
+ * @middle: Middle touchpad button is active.
+ * @ts_left: Left trackstick button is active.
+ * @ts_right: Right trackstick button is active.
+ * @ts_middle: Middle trackstick button is active.
+ */
+struct alps_fields {
+ unsigned int x_map;
+ unsigned int y_map;
+ unsigned int fingers;
+ unsigned int x;
+ unsigned int y;
+ unsigned int z;
+ unsigned int first_mp:1;
+ unsigned int is_mp:1;
+
+ unsigned int left:1;
+ unsigned int right:1;
+ unsigned int middle:1;
+
+ unsigned int ts_left:1;
+ unsigned int ts_right:1;
+ unsigned int ts_middle:1;
+};
+
+/**
* struct alps_data - private data structure for the ALPS driver
* @dev2: "Relative" device used to report trackstick or mouse activity.
* @phys: Physical path for the relative device.
@@ -78,6 +114,7 @@ struct alps_nibble_commands {
* @y_bits: Number of Y bits in the MT bitmap.
* @hw_init: Protocol-specific hardware init function.
* @process_packet: Protocol-specific function to process a report packet.
+ * @decode_fields: Protocol-specific function to read packet bitfields.
* @set_abs_params: Protocol-specific function to configure the input_dev.
* @prev_fin: Finger bit from previous packet.
* @multi_packet: Multi-packet data in progress.
@@ -107,6 +144,7 @@ struct alps_data {
int (*hw_init)(struct psmouse *psmouse);
void (*process_packet)(struct psmouse *psmouse);
+ void (*decode_fields)(struct alps_fields *f, unsigned char *p);
void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
int prev_fin;
--
1.8.1.2
From 9e7c99b6c125653f53ef0999a176c3a79de21be8 Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 22:27:08 -0800
Subject: [PATCH 12/15] Input: ALPS - add support for "Rushmore" touchpads
Rushmore touchpads are found on Dell E6230/E6430/E6530. They use the V3
protocol with slightly tweaked init sequences and report formats.
The E7 report is 73 03 0a, and the EC report is 88 08 1d
Credits: Emmanuel Thome reported the MT bitmap changes.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 270b7de..bf2fa51 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -479,6 +479,14 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p)
alps_decode_buttons_v3(f, p);
}
+static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p)
+{
+ alps_decode_pinnacle(f, p);
+
+ f->x_map |= (p[5] & 0x10) << 11;
+ f->y_map |= (p[5] & 0x20) << 6;
+}
+
static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
@@ -1329,6 +1337,40 @@ error:
return -1;
}
+static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ int reg_val, ret = -1;
+
+ if (alps_enter_command_mode(psmouse, NULL) ||
+ alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
+ alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
+ goto error;
+
+ reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6);
+ if (reg_val == -1)
+ goto error;
+ if (__alps_command_mode_write_reg(psmouse, reg_val & 0xfd))
+ goto error;
+
+ if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64))
+ goto error;
+
+ /* enter absolute mode */
+ reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4);
+ if (reg_val == -1)
+ goto error;
+ if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02))
+ goto error;
+
+ alps_exit_command_mode(psmouse);
+ return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
+
+error:
+ alps_exit_command_mode(psmouse);
+ return ret;
+}
+
/* Must be in command mode when calling this function */
static int alps_absolute_mode_v4(struct psmouse *psmouse)
{
@@ -1511,6 +1553,16 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
if (alps_match_table(psmouse, priv, e7, ec) == 0) {
return 0;
+ } else if (ec[0] == 0x88 && ec[1] == 0x08) {
+ priv->proto_version = ALPS_PROTO_V3;
+ alps_set_defaults(priv);
+
+ priv->hw_init = alps_hw_init_rushmore_v3;
+ priv->decode_fields = alps_decode_rushmore;
+ priv->x_bits = 16;
+ priv->y_bits = 12;
+
+ return 0;
} else if (ec[0] == 0x88 && ec[1] == 0x07 &&
ec[2] >= 0x90 && ec[2] <= 0x9d) {
priv->proto_version = ALPS_PROTO_V3;
--
1.8.1.2
From e5ca58dc506fb7f64760b483ecd407593b764f3b Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Wed, 13 Feb 2013 22:28:07 -0800
Subject: [PATCH 13/15] Input: ALPS - enable trackstick on Rushmore touchpads
Separate out the common trackstick probe/setup sequences, then call them
from each of the v3 init functions.
Credits: Emmanual Thome furnished the information on the trackstick init
and how it affected the report format.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 185 ++++++++++++++++++++++++++++-----------------
1 file changed, 115 insertions(+), 70 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index bf2fa51..7b99fc7 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -29,6 +29,9 @@
*/
#define ALPS_CMD_NIBBLE_10 0x01f2
+#define ALPS_REG_BASE_RUSHMORE 0xc2c0
+#define ALPS_REG_BASE_PINNACLE 0x0000
+
static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
{ PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */
{ PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */
@@ -1166,26 +1169,31 @@ static int alps_hw_init_v1_v2(struct psmouse *psmouse)
}
/*
- * Enable or disable passthrough mode to the trackstick. Must be in
- * command mode when calling this function.
+ * Enable or disable passthrough mode to the trackstick.
*/
-static int alps_passthrough_mode_v3(struct psmouse *psmouse, bool enable)
+static int alps_passthrough_mode_v3(struct psmouse *psmouse,
+ int reg_base, bool enable)
{
- int reg_val;
+ int reg_val, ret = -1;
- reg_val = alps_command_mode_read_reg(psmouse, 0x0008);
- if (reg_val == -1)
+ if (alps_enter_command_mode(psmouse, NULL))
return -1;
+ reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008);
+ if (reg_val == -1)
+ goto error;
+
if (enable)
reg_val |= 0x01;
else
reg_val &= ~0x01;
- if (__alps_command_mode_write_reg(psmouse, reg_val))
- return -1;
+ ret = __alps_command_mode_write_reg(psmouse, reg_val);
- return 0;
+error:
+ if (alps_exit_command_mode(psmouse))
+ ret = -1;
+ return ret;
}
/* Must be in command mode when calling this function */
@@ -1204,69 +1212,102 @@ static int alps_absolute_mode_v3(struct psmouse *psmouse)
return 0;
}
-static int alps_hw_init_v3(struct psmouse *psmouse)
+static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base)
{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- int reg_val;
- unsigned char param[4];
+ int ret = -EIO, reg_val;
if (alps_enter_command_mode(psmouse, NULL))
goto error;
- /* Check for trackstick */
- reg_val = alps_command_mode_read_reg(psmouse, 0x0008);
+ reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
if (reg_val == -1)
goto error;
- if (reg_val & 0x80) {
- if (alps_passthrough_mode_v3(psmouse, true))
- goto error;
- if (alps_exit_command_mode(psmouse))
- goto error;
+
+ /* bit 7: trackstick is present */
+ ret = reg_val & 0x80 ? 0 : -ENODEV;
+
+error:
+ alps_exit_command_mode(psmouse);
+ return ret;
+}
+
+static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ int ret = 0;
+ unsigned char param[4];
+
+ if (alps_passthrough_mode_v3(psmouse, reg_base, true))
+ return -EIO;
+
+ /*
+ * E7 report for the trackstick
+ *
+ * There have been reports of failures to seem to trace back
+ * to the above trackstick check failing. When these occur
+ * this E7 report fails, so when that happens we continue
+ * with the assumption that there isn't a trackstick after
+ * all.
+ */
+ if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_SETSCALE21, param)) {
+ psmouse_warn(psmouse, "trackstick E7 report failed\n");
+ ret = -ENODEV;
+ } else {
+ psmouse_dbg(psmouse,
+ "trackstick E7 report: %2.2x %2.2x %2.2x\n",
+ param[0], param[1], param[2]);
/*
- * E7 report for the trackstick
- *
- * There have been reports of failures to seem to trace back
- * to the above trackstick check failing. When these occur
- * this E7 report fails, so when that happens we continue
- * with the assumption that there isn't a trackstick after
- * all.
+ * Not sure what this does, but it is absolutely
+ * essential. Without it, the touchpad does not
+ * work at all and the trackstick just emits normal
+ * PS/2 packets.
*/
- param[0] = 0x64;
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
- psmouse_warn(psmouse, "trackstick E7 report failed\n");
- } else {
- psmouse_dbg(psmouse,
- "trackstick E7 report: %2.2x %2.2x %2.2x\n",
- param[0], param[1], param[2]);
-
- /*
- * Not sure what this does, but it is absolutely
- * essential. Without it, the touchpad does not
- * work at all and the trackstick just emits normal
- * PS/2 packets.
- */
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- alps_command_mode_send_nibble(psmouse, 0x9) ||
- alps_command_mode_send_nibble(psmouse, 0x4)) {
- psmouse_err(psmouse,
- "Error sending magic E6 sequence\n");
- goto error_passthrough;
- }
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ alps_command_mode_send_nibble(psmouse, 0x9) ||
+ alps_command_mode_send_nibble(psmouse, 0x4)) {
+ psmouse_err(psmouse,
+ "Error sending magic E6 sequence\n");
+ ret = -EIO;
+ goto error;
}
- if (alps_enter_command_mode(psmouse, NULL))
- goto error_passthrough;
- if (alps_passthrough_mode_v3(psmouse, false))
- goto error;
+ /*
+ * This ensures the trackstick packets are in the format
+ * supported by this driver. If bit 1 isn't set the packet
+ * format is different.
+ */
+ if (alps_enter_command_mode(psmouse, NULL) ||
+ alps_command_mode_write_reg(psmouse,
+ reg_base + 0x08, 0x82) ||
+ alps_exit_command_mode(psmouse))
+ ret = -EIO;
}
- if (alps_absolute_mode_v3(psmouse)) {
+error:
+ if (alps_passthrough_mode_v3(psmouse, reg_base, false))
+ ret = -EIO;
+
+ return ret;
+}
+
+static int alps_hw_init_v3(struct psmouse *psmouse)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ int reg_val;
+ unsigned char param[4];
+
+ reg_val = alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE);
+ if (reg_val == -EIO)
+ goto error;
+ if (reg_val == 0 &&
+ alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO)
+ goto error;
+
+ if (alps_enter_command_mode(psmouse, NULL) ||
+ alps_absolute_mode_v3(psmouse)) {
psmouse_err(psmouse, "Failed to enter absolute mode\n");
goto error;
}
@@ -1303,14 +1344,6 @@ static int alps_hw_init_v3(struct psmouse *psmouse)
if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04))
goto error;
- /*
- * This ensures the trackstick packets are in the format
- * supported by this driver. If bit 1 isn't set the packet
- * format is different.
- */
- if (alps_command_mode_write_reg(psmouse, 0x0008, 0x82))
- goto error;
-
alps_exit_command_mode(psmouse);
/* Set rate and enable data reporting */
@@ -1323,10 +1356,6 @@ static int alps_hw_init_v3(struct psmouse *psmouse)
return 0;
-error_passthrough:
- /* Something failed while in passthrough mode, so try to get out */
- if (!alps_enter_command_mode(psmouse, NULL))
- alps_passthrough_mode_v3(psmouse, false);
error:
/*
* Leaving the touchpad in command mode will essentially render
@@ -1339,9 +1368,19 @@ error:
static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
{
+ struct alps_data *priv = psmouse->private;
struct ps2dev *ps2dev = &psmouse->ps2dev;
int reg_val, ret = -1;
+ if (priv->flags & ALPS_DUALPOINT) {
+ reg_val = alps_setup_trackstick_v3(psmouse,
+ ALPS_REG_BASE_RUSHMORE);
+ if (reg_val == -EIO)
+ goto error;
+ if (reg_val == -ENODEV)
+ priv->flags &= ~ALPS_DUALPOINT;
+ }
+
if (alps_enter_command_mode(psmouse, NULL) ||
alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
@@ -1562,6 +1601,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
priv->x_bits = 16;
priv->y_bits = 12;
+ /* hack to make addr_command, nibble_command available */
+ psmouse->private = priv;
+
+ if (alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_RUSHMORE))
+ priv->flags &= ~ALPS_DUALPOINT;
+
return 0;
} else if (ec[0] == 0x88 && ec[1] == 0x07 &&
ec[2] >= 0x90 && ec[2] <= 0x9d) {
--
1.8.1.2
From db7192fa07fa5c70c9849d8f658a7ff696cff99d Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Sat, 16 Feb 2013 22:40:03 -0800
Subject: [PATCH 14/15] Input: ALPS - Remove unused argument to
alps_enter_command_mode()
Now that alps_identify() explicitly issues an EC report using
alps_rpt_cmd(), we no longer need to look at the magic numbers returned
by alps_enter_command_mode().
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
---
drivers/input/mouse/alps.c | 18 +++++++-----------
1 file changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 7b99fc7..9c97531 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -994,8 +994,7 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,
return 0;
}
-static int alps_enter_command_mode(struct psmouse *psmouse,
- unsigned char *resp)
+static int alps_enter_command_mode(struct psmouse *psmouse)
{
unsigned char param[4];
@@ -1009,9 +1008,6 @@ static int alps_enter_command_mode(struct psmouse *psmouse,
"unknown response while entering command mode\n");
return -1;
}
-
- if (resp)
- *resp = param[2];
return 0;
}
@@ -1176,7 +1172,7 @@ static int alps_passthrough_mode_v3(struct psmouse *psmouse,
{
int reg_val, ret = -1;
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
return -1;
reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008);
@@ -1216,7 +1212,7 @@ static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base)
{
int ret = -EIO, reg_val;
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
goto error;
reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
@@ -1279,7 +1275,7 @@ static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
* supported by this driver. If bit 1 isn't set the packet
* format is different.
*/
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_command_mode_write_reg(psmouse,
reg_base + 0x08, 0x82) ||
alps_exit_command_mode(psmouse))
@@ -1306,7 +1302,7 @@ static int alps_hw_init_v3(struct psmouse *psmouse)
alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO)
goto error;
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_absolute_mode_v3(psmouse)) {
psmouse_err(psmouse, "Failed to enter absolute mode\n");
goto error;
@@ -1381,7 +1377,7 @@ static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
priv->flags &= ~ALPS_DUALPOINT;
}
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
goto error;
@@ -1431,7 +1427,7 @@ static int alps_hw_init_v4(struct psmouse *psmouse)
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[4];
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
goto error;
if (alps_absolute_mode_v4(psmouse)) {
--
1.8.1.2
From 10740a25bb3b895b5de7773f926a978416b38409 Mon Sep 17 00:00:00 2001
From: Dave Turvene <dturvene@dahetral.com>
Date: Sat, 16 Feb 2013 22:40:04 -0800
Subject: [PATCH 15/15] Input: ALPS - Add "Dolphin V1" touchpad support
These touchpads use a different protocol; they have been seen on Dell
N5110, Dell 17R SE, and others.
The official ALPS driver identifies them by looking for an exact match
on the E7 report: 73 03 50. Dolphin V1 returns an EC report of
73 01 xx (02 and 0d have been seen); Dolphin V2 returns an EC report of
73 02 xx (02 has been seen).
Dolphin V2 probably needs a different initialization sequence and/or
report parser, so it is left for a future commit.
Signed-off-by: Dave Turvene <dturvene@dahetral.com>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
---
drivers/input/mouse/alps.c | 67 ++++++++++++++++++++++++++++++++++++++++++++--
drivers/input/mouse/alps.h | 1 +
2 files changed, 66 insertions(+), 2 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 9c97531..0238e0e 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -490,6 +490,29 @@ static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p)
f->y_map |= (p[5] & 0x20) << 6;
}
+static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p)
+{
+ f->first_mp = !!(p[0] & 0x02);
+ f->is_mp = !!(p[0] & 0x20);
+
+ f->fingers = ((p[0] & 0x6) >> 1 |
+ (p[0] & 0x10) >> 2);
+ f->x_map = ((p[2] & 0x60) >> 5) |
+ ((p[4] & 0x7f) << 2) |
+ ((p[5] & 0x7f) << 9) |
+ ((p[3] & 0x07) << 16) |
+ ((p[3] & 0x70) << 15) |
+ ((p[0] & 0x01) << 22);
+ f->y_map = (p[1] & 0x7f) |
+ ((p[2] & 0x1f) << 7);
+
+ f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
+ f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
+ f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
+
+ alps_decode_buttons_v3(f, p);
+}
+
static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
@@ -874,7 +897,8 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
}
/* Bytes 2 - pktsize should have 0 in the highest bit */
- if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
+ if (priv->proto_version != ALPS_PROTO_V5 &&
+ psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
psmouse->pktcnt - 1,
@@ -1003,7 +1027,8 @@ static int alps_enter_command_mode(struct psmouse *psmouse)
return -1;
}
- if (param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) {
+ if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) &&
+ param[0] != 0x73) {
psmouse_dbg(psmouse,
"unknown response while entering command mode\n");
return -1;
@@ -1495,6 +1520,23 @@ error:
return -1;
}
+static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ unsigned char param[2];
+
+ /* This is dolphin "v1" as empirically defined by florin9doi */
+ param[0] = 0x64;
+ param[1] = 0x28;
+
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
+ ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
+ ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE))
+ return -1;
+
+ return 0;
+}
+
static void alps_set_defaults(struct alps_data *priv)
{
priv->byte0 = 0x8f;
@@ -1528,6 +1570,21 @@ static void alps_set_defaults(struct alps_data *priv)
priv->nibble_commands = alps_v4_nibble_commands;
priv->addr_command = PSMOUSE_CMD_DISABLE;
break;
+ case ALPS_PROTO_V5:
+ priv->hw_init = alps_hw_init_dolphin_v1;
+ priv->process_packet = alps_process_packet_v3;
+ priv->decode_fields = alps_decode_dolphin;
+ priv->set_abs_params = alps_set_abs_params_mt;
+ priv->nibble_commands = alps_v3_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+ priv->byte0 = 0xc8;
+ priv->mask0 = 0xc8;
+ priv->flags = 0;
+ priv->x_max = 1360;
+ priv->y_max = 660;
+ priv->x_bits = 23;
+ priv->y_bits = 12;
+ break;
}
}
@@ -1588,6 +1645,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
if (alps_match_table(psmouse, priv, e7, ec) == 0) {
return 0;
+ } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
+ ec[0] == 0x73 && ec[1] == 0x01) {
+ priv->proto_version = ALPS_PROTO_V5;
+ alps_set_defaults(priv);
+
+ return 0;
} else if (ec[0] == 0x88 && ec[1] == 0x08) {
priv->proto_version = ALPS_PROTO_V3;
alps_set_defaults(priv);
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 9704805..eee5985 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -16,6 +16,7 @@
#define ALPS_PROTO_V2 2
#define ALPS_PROTO_V3 3
#define ALPS_PROTO_V4 4
+#define ALPS_PROTO_V5 5
/**
* struct alps_model_info - touchpad ID table
--
1.8.1.2