Most IR fixups take from:
http://git.kernel.org/?p=linux/kernel/git/jarod/linux-2.6-ir.git;a=shortlog;h=refs/heads/staging
Last three taken from:
http://git.linuxtv.org/jarod/linux-2.6-ir.git?a=shortlog;h=refs/heads/for-2.6.38
Should all be in v4l/dvb/rc soon...
commit db7e4498b17d9b52c8fddf828bad54454ab130ec
Author: Jarod Wilson <jarod@redhat.com>
Date: Thu Jan 27 13:08:35 2011 -0500
rc/streamzap: fix reporting response times
The streamzap driver has relatively low sampling resolution, and any
delays in reporting events seem to cause some minor problems for the
likes of irw when using the lirc bridge driver, resulting in a single
keypress registering as multiple independent ones, rather than as a
single press with repeats. If we call ir_raw_event_handle() more
frequently and reset the rawir kfifo at end-of-signal, the behavior
improves quite a bit.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 583602a0c6cab187b2f3b4c90509bbe2b85f5d51
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 24 22:06:32 2011 -0500
mceusb: really fix remaining keybounce issues
Make sure rawir struct is zeroed out before populating it for each
ir_raw_event_store_with_filter() call, and when we see a trailing 0x80
packet (end-of-data), issue an ir_raw_event_reset() call.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 8b07e7fe2fa1c763a8f08a179917fdf1a43b479d
Author: Jarod Wilson <jarod@redhat.com>
Date: Thu Jan 20 16:31:18 2011 -0500
ir-kbd-i2c: improve remote behavior with z8 behind usb
Add the same "are you ready?" i2c_master_send() poll command to
get_key_haup_xvr found in lirc_zilog, which is apparently seen in
the Windows driver for the PVR-150 w/a z8. This stabilizes what is
received from both the HD-PVR and HVR-1950, even with their polling
intervals at the default of 100, thus the removal of the custom
260ms polling_interval in pvrusb2-i2c-core.c.
Acked-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Mike Isely <isely@isely.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit aedf7d79cdeaf97d3efc7d667eeb94689bbc6e7d
Author: Jarod Wilson <jarod@redhat.com>
Date: Wed Jan 19 16:49:19 2011 -0500
lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send
Both the HD-PVR and HVR-1950, driven by the hdpvr and pvrusb2 drivers
respectively, have a zilog z8 chip exposed via i2c. These are both
usb-connected devices, and on both of them, back-to-back i2c_master_send
calls that work fine with a z8 on a pci card fail with a -EIO, as the
chip isn't yet ready from the prior command. To cope with that, add a
delay and retry loop where necessary.
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
t 2b197149441796e694721db984db9e5ca4656856
Author: Jarod Wilson <jarod@redhat.com>
Date: Wed Jan 19 16:10:14 2011 -0500
hdpvr: fix up i2c device registration
We have to actually call i2c_new_device() once for each of the rx and tx
addresses. Also improve error-handling and device remove i2c cleanup.
Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit f2a6849f005fc0da0528ada0c3c79c7572db2898
Author: Jarod Wilson <jarod@redhat.com>
Date: Tue Jan 18 00:33:08 2011 -0500
rc/ir-lirc-codec: add back debug spew
Some occasionally useful debug spew disappeared as part of a feature
update a while back, and I'm finding myself in need of it again to help
diagnose some issues.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 20285f04106a578f6202ba043e0044df614aee05
Author: Jarod Wilson <jarod@redhat.com>
Date: Tue Jan 18 00:27:45 2011 -0500
rc/mce: add mappings for missing keys
Per http://mediacenterguides.com/book/export/html/31 and investigation
by Erin, we were missing these last three mappings to complete the mce
key table. Lets remedy that.
Reported-by: Erin Simonds <fisslefink@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 2469809bfffe496fa51cb030759f6c2f55dc5002
Author: Jarod Wilson <jarod@redhat.com>
Date: Tue Mar 1 10:21:50 2011 -0500
tda829x: fix regression in probe functions
In commit 567aba0b7997dad5fe3fb4aeb174ee9018df8c5b, the probe address
for tda8290_probe and tda8295_probe was hard-coded to 0x4b, which is the
default i2c address for those devices, but its possible for the device
to be at an alternate address, 0x42, which is the case for the HVR-1950.
If we probe the wrong address, probe fails and we have a non-working
device. We have the actual address passed into the function by way of
i2c_props, we just need to use it. Also fix up some copy/paste comment
issues and streamline debug spew a touch. Verified to restore my
HVR-1950 to full working order.
Special thanks to Ken Bass for reporting the issue in the first place,
and to both he and Gary Buhrmaster for aiding in debugging and analysis
of the problem.
Reported-by: Ken Bass <kbass@kenbass.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 428cca0644eba44c867b21b1fef5d30678d52e8a
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Feb 28 17:04:43 2011 -0500
mceusb: don't claim multifunction device non-IR parts
There's a Realtek combo card reader and IR receiver device with multiple
usb interfaces on it. The mceusb driver is incorrectly grabbing all of
them. This change should make it bind to only interface 2 (patch based
on lsusb output on the linux-media list from Lucian Muresan).
Tested regression-free with the six mceusb devices I have myself.
Reported-by: Patrick Boettcher <pboettcher@kernellabs.com>
Reported-by: Lucian Muresan <lucianm@users.sourceforge.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 24a576808cee7c32f2be97ed9050562fd671292e
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Feb 28 16:33:32 2011 -0500
nuvoton-cir: fix wake from suspend
The CIR Wake FIFO is 67 bytes long, but the stock remote appears to only
populate 65 of them. Limit comparison to 65 bytes, and wake from suspend
works a whole lot better (it wasn't working at all for most folks).
Fix based on comparison with the old lirc_wb677 driver from Nuvoton,
debugging and testing done by Dave Treacy by way of the lirc mailing
list.
Reported-by: Dave Treacy <davetreacy@gmail.com>
CC: stable@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index f011c5d..1c5cc65 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -1,4 +1,4 @@
-/* ir-lirc-codec.c - ir-core to classic lirc interface bridge
+/* ir-lirc-codec.c - rc-core to classic lirc interface bridge
*
* Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
*
@@ -47,6 +47,7 @@ static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev)
/* Carrier reports */
if (ev.carrier_report) {
sample = LIRC_FREQUENCY(ev.carrier);
+ IR_dprintk(2, "carrier report (freq: %d)\n", sample);
/* Packet end */
} else if (ev.timeout) {
@@ -62,6 +63,7 @@ static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev)
return 0;
sample = LIRC_TIMEOUT(ev.duration / 1000);
+ IR_dprintk(2, "timeout report (duration: %d)\n", sample);
/* Normal sample */
} else {
@@ -85,6 +87,8 @@ static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev)
sample = ev.pulse ? LIRC_PULSE(ev.duration / 1000) :
LIRC_SPACE(ev.duration / 1000);
+ IR_dprintk(2, "delivering %uus %s to lirc_dev\n",
+ TO_US(ev.duration), TO_STR(ev.pulse));
}
lirc_buffer_write(dev->raw->lirc.drv->rbuf,
diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c
index 3bf3337..2f5dc06 100644
--- a/drivers/media/rc/keymaps/rc-rc6-mce.c
+++ b/drivers/media/rc/keymaps/rc-rc6-mce.c
@@ -3,6 +3,9 @@
*
* Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
*
+ * See http://mediacenterguides.com/book/export/html/31 for details on
+ * key mappings.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -60,6 +63,9 @@ static struct rc_map_table rc6_mce[] = {
{ 0x800f0426, KEY_EPG }, /* Guide */
{ 0x800f0427, KEY_ZOOM }, /* Aspect */
+ { 0x800f0432, KEY_MODE }, /* Visualization */
+ { 0x800f0433, KEY_PRESENTATION }, /* Slide Show */
+ { 0x800f0434, KEY_EJECTCD },
{ 0x800f043a, KEY_BRIGHTNESSUP },
{ 0x800f0446, KEY_TV },
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 079353e..cf763fb 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -855,6 +855,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
break;
case PARSE_IRDATA:
ir->rem--;
+ init_ir_raw_event(&rawir);
rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
* MS_TO_US(MCE_TIME_UNIT);
@@ -883,6 +884,8 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
i, ir->rem + 1, false);
if (ir->rem)
ir->parser_state = PARSE_IRDATA;
+ else
+ ir_raw_event_reset(ir->rc);
break;
}
diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c
index a6572e5..a27d93b 100644
--- a/drivers/media/video/hdpvr/hdpvr-core.c
+++ b/drivers/media/video/hdpvr/hdpvr-core.c
@@ -283,6 +283,7 @@ static int hdpvr_probe(struct usb_interface *interface,
struct hdpvr_device *dev;
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
+ struct i2c_client *client;
size_t buffer_size;
int i;
int retval = -ENOMEM;
@@ -381,13 +382,21 @@ static int hdpvr_probe(struct usb_interface *interface,
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
retval = hdpvr_register_i2c_adapter(dev);
if (retval < 0) {
- v4l2_err(&dev->v4l2_dev, "registering i2c adapter failed\n");
+ v4l2_err(&dev->v4l2_dev, "i2c adapter register failed\n");
goto error;
}
- retval = hdpvr_register_i2c_ir(dev);
- if (retval < 0)
- v4l2_err(&dev->v4l2_dev, "registering i2c IR devices failed\n");
+ client = hdpvr_register_ir_rx_i2c(dev);
+ if (!client) {
+ v4l2_err(&dev->v4l2_dev, "i2c IR RX device register failed\n");
+ goto reg_fail;
+ }
+
+ client = hdpvr_register_ir_tx_i2c(dev);
+ if (!client) {
+ v4l2_err(&dev->v4l2_dev, "i2c IR TX device register failed\n");
+ goto reg_fail;
+ }
#endif
/* let the user know what node this device is now attached to */
@@ -395,6 +404,10 @@ static int hdpvr_probe(struct usb_interface *interface,
video_device_node_name(dev->video_dev));
return 0;
+reg_fail:
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_adapter(&dev->i2c_adapter);
+#endif
error:
if (dev) {
/* Destroy single thread */
@@ -424,6 +437,9 @@ static void hdpvr_disconnect(struct usb_interface *interface)
mutex_lock(&dev->io_mutex);
hdpvr_cancel_queue(dev);
mutex_unlock(&dev->io_mutex);
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_adapter(&dev->i2c_adapter);
+#endif
video_unregister_device(dev->video_dev);
atomic_dec(&dev_nr);
}
diff --git a/drivers/media/video/hdpvr/hdpvr-i2c.c b/drivers/media/video/hdpvr/hdpvr-i2c.c
index 89b71fa..e53fa55 100644
--- a/drivers/media/video/hdpvr/hdpvr-i2c.c
+++ b/drivers/media/video/hdpvr/hdpvr-i2c.c
@@ -31,26 +31,34 @@
#define Z8F0811_IR_RX_I2C_ADDR 0x71
-static struct i2c_board_info hdpvr_i2c_board_info = {
- I2C_BOARD_INFO("ir_tx_z8f0811_hdpvr", Z8F0811_IR_TX_I2C_ADDR),
- I2C_BOARD_INFO("ir_rx_z8f0811_hdpvr", Z8F0811_IR_RX_I2C_ADDR),
-};
+struct i2c_client *hdpvr_register_ir_tx_i2c(struct hdpvr_device *dev)
+{
+ struct IR_i2c_init_data *init_data = &dev->ir_i2c_init_data;
+ struct i2c_board_info hdpvr_ir_tx_i2c_board_info = {
+ I2C_BOARD_INFO("ir_tx_z8f0811_hdpvr", Z8F0811_IR_TX_I2C_ADDR),
+ };
+
+ init_data->name = "HD-PVR";
+ hdpvr_ir_tx_i2c_board_info.platform_data = init_data;
-int hdpvr_register_i2c_ir(struct hdpvr_device *dev)
+ return i2c_new_device(&dev->i2c_adapter, &hdpvr_ir_tx_i2c_board_info);
+}
+
+struct i2c_client *hdpvr_register_ir_rx_i2c(struct hdpvr_device *dev)
{
- struct i2c_client *c;
struct IR_i2c_init_data *init_data = &dev->ir_i2c_init_data;
+ struct i2c_board_info hdpvr_ir_rx_i2c_board_info = {
+ I2C_BOARD_INFO("ir_rx_z8f0811_hdpvr", Z8F0811_IR_RX_I2C_ADDR),
+ };
/* Our default information for ir-kbd-i2c.c to use */
init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
init_data->type = RC_TYPE_RC5;
- init_data->name = "HD PVR";
- hdpvr_i2c_board_info.platform_data = init_data;
-
- c = i2c_new_device(&dev->i2c_adapter, &hdpvr_i2c_board_info);
+ init_data->name = "HD-PVR";
+ hdpvr_ir_rx_i2c_board_info.platform_data = init_data;
- return (c == NULL) ? -ENODEV : 0;
+ return i2c_new_device(&dev->i2c_adapter, &hdpvr_ir_rx_i2c_board_info);
}
static int hdpvr_i2c_read(struct hdpvr_device *dev, int bus,
diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h
index ee74e3b..072f23c 100644
--- a/drivers/media/video/hdpvr/hdpvr.h
+++ b/drivers/media/video/hdpvr/hdpvr.h
@@ -313,7 +313,8 @@ int hdpvr_cancel_queue(struct hdpvr_device *dev);
/* i2c adapter registration */
int hdpvr_register_i2c_adapter(struct hdpvr_device *dev);
-int hdpvr_register_i2c_ir(struct hdpvr_device *dev);
+struct i2c_client *hdpvr_register_ir_rx_i2c(struct hdpvr_device *dev);
+struct i2c_client *hdpvr_register_ir_tx_i2c(struct hdpvr_device *dev);
/*========================================================================*/
/* buffer management */
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index d2b20ad..a221ad6 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -128,6 +128,19 @@ static int get_key_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
static int get_key_haup_xvr(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
+ int ret;
+ unsigned char buf[1] = { 0 };
+
+ /*
+ * This is the same apparent "are you ready?" poll command observed
+ * watching Windows driver traffic and implemented in lirc_zilog. With
+ * this added, we get far saner remote behavior with z8 chips on usb
+ * connected devices, even with the default polling interval of 100ms.
+ */
+ ret = i2c_master_send(ir->c, buf, 1);
+ if (ret != 1)
+ return (ret < 0) ? ret : -EINVAL;
+
return get_key_haup_common (ir, ir_key, ir_raw, 6, 3);
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
index ccc8849..451ecd4 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
@@ -597,7 +597,6 @@ static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw)
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
init_data->type = RC_TYPE_RC5;
init_data->name = hdw->hdw_desc->description;
- init_data->polling_interval = 260; /* ms From lirc_zilog */
/* IR Receiver */
info.addr = 0x71;
info.platform_data = init_data;
diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c
index 3fe5f41..0aad0d7 100644
--- a/drivers/staging/lirc/lirc_zilog.c
+++ b/drivers/staging/lirc/lirc_zilog.c
@@ -495,7 +495,7 @@ static int send_data_block(struct IR_tx *tx, unsigned char *data_block)
/* send boot data to the IR TX device */
static int send_boot_data(struct IR_tx *tx)
{
- int ret;
+ int ret, i;
unsigned char buf[4];
/* send the boot block */
@@ -503,7 +503,7 @@ static int send_boot_data(struct IR_tx *tx)
if (ret != 0)
return ret;
- /* kick it off? */
+ /* Hit the go button to activate the new boot data */
buf[0] = 0x00;
buf[1] = 0x20;
ret = i2c_master_send(tx->c, buf, 2);
@@ -511,7 +511,19 @@ static int send_boot_data(struct IR_tx *tx)
zilog_error("i2c_master_send failed with %d\n", ret);
return ret < 0 ? ret : -EFAULT;
}
- ret = i2c_master_send(tx->c, buf, 1);
+
+ /*
+ * Wait for zilog to settle after hitting go post boot block upload.
+ * Without this delay, the HD-PVR and HVR-1950 both return an -EIO
+ * upon attempting to get firmware revision, and tx probe thus fails.
+ */
+ for (i = 0; i < 10; i++) {
+ ret = i2c_master_send(tx->c, buf, 1);
+ if (ret == 1)
+ break;
+ udelay(100);
+ }
+
if (ret != 1) {
zilog_error("i2c_master_send failed with %d\n", ret);
return ret < 0 ? ret : -EFAULT;
@@ -523,8 +535,8 @@ static int send_boot_data(struct IR_tx *tx)
zilog_error("i2c_master_recv failed with %d\n", ret);
return 0;
}
- if (buf[0] != 0x80) {
- zilog_error("unexpected IR TX response: %02x\n", buf[0]);
+ if ((buf[0] != 0x80) && (buf[0] != 0xa0)) {
+ zilog_error("unexpected IR TX init response: %02x\n", buf[0]);
return 0;
}
zilog_notify("Zilog/Hauppauge IR blaster firmware version "
@@ -827,7 +839,15 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
zilog_error("i2c_master_send failed with %d\n", ret);
return ret < 0 ? ret : -EFAULT;
}
- ret = i2c_master_send(tx->c, buf, 1);
+
+ /* Give the z8 a moment to process data block */
+ for (i = 0; i < 10; i++) {
+ ret = i2c_master_send(tx->c, buf, 1);
+ if (ret == 1)
+ break;
+ udelay(100);
+ }
+
if (ret != 1) {
zilog_error("i2c_master_send failed with %d\n", ret);
return ret < 0 ? ret : -EFAULT;
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index d9b6b48..e435d94 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -273,6 +273,7 @@ static void streamzap_callback(struct urb *urb)
if (sz->timeout_enabled)
sz_push(sz, rawir);
ir_raw_event_handle(sz->rdev);
+ ir_raw_event_reset(sz->rdev);
} else {
sz_push_full_space(sz, sz->buf_in[i]);
}
@@ -290,6 +291,7 @@ static void streamzap_callback(struct urb *urb)
}
}
+ ir_raw_event_handle(sz->rdev);
usb_submit_urb(urb, GFP_ATOMIC);
return;
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index dd4caf8..d0b1c10 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -385,8 +385,9 @@ static void nvt_cir_regs_init(struct nvt_dev *nvt)
static void nvt_cir_wake_regs_init(struct nvt_dev *nvt)
{
- /* set number of bytes needed for wake key comparison (default 67) */
- nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_LEN, CIR_WAKE_FIFO_CMP_DEEP);
+ /* set number of bytes needed for wake from s3 (default 65) */
+ nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_CMP_BYTES,
+ CIR_WAKE_FIFO_CMP_DEEP);
/* set tolerance/variance allowed per byte during wake compare */
nvt_cir_wake_reg_write(nvt, CIR_WAKE_CMP_TOLERANCE,
diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h
index 1df8235..048135e 100644
--- a/drivers/media/rc/nuvoton-cir.h
+++ b/drivers/media/rc/nuvoton-cir.h
@@ -305,8 +305,11 @@ struct nvt_dev {
#define CIR_WAKE_IRFIFOSTS_RX_EMPTY 0x20
#define CIR_WAKE_IRFIFOSTS_RX_FULL 0x10
-/* CIR Wake FIFO buffer is 67 bytes long */
-#define CIR_WAKE_FIFO_LEN 67
+/*
+ * The CIR Wake FIFO buffer is 67 bytes long, but the stock remote wakes
+ * the system comparing only 65 bytes (fails with this set to 67)
+ */
+#define CIR_WAKE_FIFO_CMP_BYTES 65
/* CIR Wake byte comparison tolerance */
#define CIR_WAKE_CMP_TOLERANCE 5
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 079353e..d21ae1a 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -148,6 +148,7 @@ enum mceusb_model_type {
MCE_GEN2_TX_INV,
POLARIS_EVK,
CX_HYBRID_TV,
+ MULTIFUNCTION,
};
struct mceusb_model {
@@ -155,9 +156,10 @@ struct mceusb_model {
u32 mce_gen2:1;
u32 mce_gen3:1;
u32 tx_mask_normal:1;
- u32 is_polaris:1;
u32 no_tx:1;
+ int ir_intfnum;
+
const char *rc_map; /* Allow specify a per-board map */
const char *name; /* per-board name */
};
@@ -179,7 +181,6 @@ static const struct mceusb_model mceusb_model[] = {
.tx_mask_normal = 1,
},
[POLARIS_EVK] = {
- .is_polaris = 1,
/*
* In fact, the EVK is shipped without
* remotes, but we should have something handy,
@@ -189,10 +190,13 @@ static const struct mceusb_model mceusb_model[] = {
.name = "Conexant Hybrid TV (cx231xx) MCE IR",
},
[CX_HYBRID_TV] = {
- .is_polaris = 1,
.no_tx = 1, /* tx isn't wired up at all */
.name = "Conexant Hybrid TV (cx231xx) MCE IR",
},
+ [MULTIFUNCTION] = {
+ .mce_gen2 = 1,
+ .ir_intfnum = 2,
+ },
};
static struct usb_device_id mceusb_dev_table[] = {
@@ -216,8 +220,9 @@ static struct usb_device_id mceusb_dev_table[] = {
{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
/* Philips/Spinel plus IR transceiver for ASUS */
{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
- /* Realtek MCE IR Receiver */
- { USB_DEVICE(VENDOR_REALTEK, 0x0161) },
+ /* Realtek MCE IR Receiver and card reader */
+ { USB_DEVICE(VENDOR_REALTEK, 0x0161),
+ .driver_info = MULTIFUNCTION },
/* SMK/Toshiba G83C0004D410 */
{ USB_DEVICE(VENDOR_SMK, 0x031d),
.driver_info = MCE_GEN2_TX_INV },
@@ -1098,7 +1103,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
bool is_gen3;
bool is_microsoft_gen1;
bool tx_mask_normal;
- bool is_polaris;
+ int ir_intfnum;
dev_dbg(&intf->dev, "%s called\n", __func__);
@@ -1107,13 +1112,11 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
is_gen3 = mceusb_model[model].mce_gen3;
is_microsoft_gen1 = mceusb_model[model].mce_gen1;
tx_mask_normal = mceusb_model[model].tx_mask_normal;
- is_polaris = mceusb_model[model].is_polaris;
+ ir_intfnum = mceusb_model[model].ir_intfnum;
- if (is_polaris) {
- /* Interface 0 is IR */
- if (idesc->desc.bInterfaceNumber)
- return -ENODEV;
- }
+ /* There are multi-function devices with non-IR interfaces */
+ if (idesc->desc.bInterfaceNumber != ir_intfnum)
+ return -ENODEV;
/* step through the endpoints to find first bulk in and out endpoint */
for (i = 0; i < idesc->desc.bNumEndpoints; ++i) {
diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c
index bc6a677..8c48521 100644
--- a/drivers/media/common/tuners/tda8290.c
+++ b/drivers/media/common/tuners/tda8290.c
@@ -658,13 +658,13 @@ static int tda8290_probe(struct tuner_i2c_props *i2c_props)
#define TDA8290_ID 0x89
u8 reg = 0x1f, id;
struct i2c_msg msg_read[] = {
- { .addr = 0x4b, .flags = 0, .len = 1, .buf = ® },
- { .addr = 0x4b, .flags = I2C_M_RD, .len = 1, .buf = &id },
+ { .addr = i2c_props->addr, .flags = 0, .len = 1, .buf = ® },
+ { .addr = i2c_props->addr, .flags = I2C_M_RD, .len = 1, .buf = &id },
};
/* detect tda8290 */
if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) {
- printk(KERN_WARNING "%s: tda8290 couldn't read register 0x%02x\n",
+ printk(KERN_WARNING "%s: couldn't read register 0x%02x\n",
__func__, reg);
return -ENODEV;
}
@@ -685,13 +685,13 @@ static int tda8295_probe(struct tuner_i2c_props *i2c_props)
#define TDA8295C2_ID 0x8b
u8 reg = 0x2f, id;
struct i2c_msg msg_read[] = {
- { .addr = 0x4b, .flags = 0, .len = 1, .buf = ® },
- { .addr = 0x4b, .flags = I2C_M_RD, .len = 1, .buf = &id },
+ { .addr = i2c_props->addr, .flags = 0, .len = 1, .buf = ® },
+ { .addr = i2c_props->addr, .flags = I2C_M_RD, .len = 1, .buf = &id },
};
- /* detect tda8290 */
+ /* detect tda8295 */
if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) {
- printk(KERN_WARNING "%s: tda8290 couldn't read register 0x%02x\n",
+ printk(KERN_WARNING "%s: couldn't read register 0x%02x\n",
__func__, reg);
return -ENODEV;
}