From 13ac768d9a8731c8b3bab7d6c86520f290272fe7 Mon Sep 17 00:00:00 2001
From: JJ Ding <jj_ding@emc.com.tw>
Date: Fri, 9 Sep 2011 10:22:19 -0700
Subject: Input: elantech - correct x, y value range for v2 hardware
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
x, y values are actually 12-bit long. Also update protocol document to
reflect the change.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
Documentation/input/elantech.txt | 8 ++++----
drivers/input/mouse/elantech.c | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index db798af..bce9941 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -389,14 +389,14 @@ byte 0:
byte 1:
bit 7 6 5 4 3 2 1 0
- p7 p6 p5 p4 . x10 x9 x8
+ p7 p6 p5 p4 x11 x10 x9 x8
byte 2:
bit 7 6 5 4 3 2 1 0
x7 x6 x5 x4 x3 x2 x1 x0
- x10..x0 = absolute x value (horizontal)
+ x11..x0 = absolute x value (horizontal)
byte 3:
@@ -420,7 +420,7 @@ byte 3:
byte 4:
bit 7 6 5 4 3 2 1 0
- p3 p1 p2 p0 . . y9 y8
+ p3 p1 p2 p0 y11 y10 y9 y8
p7..p0 = pressure (not EF113)
@@ -429,7 +429,7 @@ byte 5:
bit 7 6 5 4 3 2 1 0
y7 y6 y5 y4 y3 y2 y1 y0
- y9..y0 = absolute y value (vertical)
+ y11..y0 = absolute y value (vertical)
4.2.2 Two finger touch
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 3250356..da161da 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -290,15 +290,15 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
/* pass through... */
case 1:
/*
- * byte 1: . . . . . x10 x9 x8
+ * byte 1: . . . . x11 x10 x9 x8
* byte 2: x7 x6 x5 x4 x4 x2 x1 x0
*/
- x1 = ((packet[1] & 0x07) << 8) | packet[2];
+ x1 = ((packet[1] & 0x0f) << 8) | packet[2];
/*
- * byte 4: . . . . . . y9 y8
+ * byte 4: . . . . y11 y10 y9 y8
* byte 5: y7 y6 y5 y4 y3 y2 y1 y0
*/
- y1 = ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]);
+ y1 = ETP_YMAX_V2 - (((packet[4] & 0x0f) << 8) | packet[5]);
input_report_abs(dev, ABS_X, x1);
input_report_abs(dev, ABS_Y, y1);
--
1.7.6.4
From c47c9334b4ebb6ecb565d9bf834df170fcd09484 Mon Sep 17 00:00:00 2001
From: JJ Ding <jj_ding@emc.com.tw>
Date: Fri, 9 Sep 2011 10:22:58 -0700
Subject: Input: elantech - get rid of ETP_2FT_* in elantech.h
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
For two finger touches the coordinate of each finger gets reported
separately but with reduced resolution.
With this change, we now have the same range for ST and MT data and
scale MT data because it has lower resolution to match ST.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/elantech.c | 28 +++++++++++++---------------
drivers/input/mouse/elantech.h | 11 -----------
2 files changed, 13 insertions(+), 26 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index da161da..cd8e2e5 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -273,11 +273,11 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
struct elantech_data *etd = psmouse->private;
struct input_dev *dev = psmouse->dev;
unsigned char *packet = psmouse->packet;
- unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0, width = 0, pres = 0;
+ unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
+ unsigned int width = 0, pres = 0;
/* byte 0: n1 n0 . . . . R L */
fingers = (packet[0] & 0xc0) >> 6;
- input_report_key(dev, BTN_TOUCH, fingers != 0);
switch (fingers) {
case 3:
@@ -300,9 +300,6 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
*/
y1 = ETP_YMAX_V2 - (((packet[4] & 0x0f) << 8) | packet[5]);
- input_report_abs(dev, ABS_X, x1);
- input_report_abs(dev, ABS_Y, y1);
-
pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
break;
@@ -314,22 +311,18 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
* byte 0: . . ay8 ax8 . . . .
* byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
*/
- x1 = ((packet[0] & 0x10) << 4) | packet[1];
+ x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2;
/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
- y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]);
+ y1 = ETP_YMAX_V2 -
+ ((((packet[0] & 0x20) << 3) | packet[2]) << 2);
/*
* byte 3: . . by8 bx8 . . . .
* byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
*/
- x2 = ((packet[3] & 0x10) << 4) | packet[4];
+ x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2;
/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
- y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]);
- /*
- * For compatibility with the X Synaptics driver scale up
- * one coordinate and report as ordinary mouse movent
- */
- input_report_abs(dev, ABS_X, x1 << 2);
- input_report_abs(dev, ABS_Y, y1 << 2);
+ y2 = ETP_YMAX_V2 -
+ ((((packet[3] & 0x20) << 3) | packet[5]) << 2);
/* Unknown so just report sensible values */
pres = 127;
@@ -337,6 +330,11 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
break;
}
+ input_report_key(dev, BTN_TOUCH, fingers != 0);
+ if (fingers != 0) {
+ input_report_abs(dev, ABS_X, x1);
+ input_report_abs(dev, ABS_Y, y1);
+ }
elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index fabb2b9..1c5894e 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -82,17 +82,6 @@
#define ETP_WMIN_V2 0
#define ETP_WMAX_V2 15
-/*
- * For two finger touches the coordinate of each finger gets reported
- * separately but with reduced resolution.
- */
-#define ETP_2FT_FUZZ 4
-
-#define ETP_2FT_XMIN ( 0 + ETP_2FT_FUZZ)
-#define ETP_2FT_XMAX (288 - ETP_2FT_FUZZ)
-#define ETP_2FT_YMIN ( 0 + ETP_2FT_FUZZ)
-#define ETP_2FT_YMAX (192 - ETP_2FT_FUZZ)
-
struct elantech_data {
unsigned char reg_10;
unsigned char reg_11;
--
1.7.6.4
From aa719e391c1769c93ec42a30daffa4ffa2a8503c Mon Sep 17 00:00:00 2001
From: JJ Ding <jj_ding@emc.com.tw>
Date: Fri, 9 Sep 2011 10:26:16 -0700
Subject: Input: elantech - use firmware provided x, y ranges
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
With newer hardware, the touchpad provides range info.
Let's use it.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/elantech.c | 71 +++++++++++++++++++++++++++++++--------
drivers/input/mouse/elantech.h | 3 +-
2 files changed, 58 insertions(+), 16 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index cd8e2e5..296b6a6 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -223,7 +223,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
input_report_abs(dev, ABS_X,
((packet[1] & 0x0c) << 6) | packet[2]);
input_report_abs(dev, ABS_Y,
- ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3]));
+ etd->y_max - (((packet[1] & 0x03) << 8) | packet[3]));
}
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
@@ -233,7 +233,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
if (etd->fw_version < 0x020000 &&
- (etd->capabilities & ETP_CAP_HAS_ROCKER)) {
+ (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
/* rocker up */
input_report_key(dev, BTN_FORWARD, packet[0] & 0x40);
/* rocker down */
@@ -298,7 +298,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
* byte 4: . . . . y11 y10 y9 y8
* byte 5: y7 y6 y5 y4 y3 y2 y1 y0
*/
- y1 = ETP_YMAX_V2 - (((packet[4] & 0x0f) << 8) | packet[5]);
+ y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
@@ -313,7 +313,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
*/
x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2;
/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
- y1 = ETP_YMAX_V2 -
+ y1 = etd->y_max -
((((packet[0] & 0x20) << 3) | packet[2]) << 2);
/*
* byte 3: . . by8 bx8 . . . .
@@ -321,7 +321,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
*/
x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2;
/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
- y2 = ETP_YMAX_V2 -
+ y2 = etd->y_max -
((((packet[3] & 0x20) << 3) | packet[5]) << 2);
/* Unknown so just report sensible values */
@@ -468,6 +468,41 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
return rc;
}
+static void elantech_set_range(struct psmouse *psmouse,
+ unsigned int *x_min, unsigned int *y_min,
+ unsigned int *x_max, unsigned int *y_max)
+{
+ struct elantech_data *etd = psmouse->private;
+ int i;
+
+ switch (etd->hw_version) {
+ case 1:
+ *x_min = ETP_XMIN_V1;
+ *y_min = ETP_YMIN_V1;
+ *x_max = ETP_XMAX_V1;
+ *y_max = ETP_YMAX_V1;
+ break;
+
+ case 2:
+ if (etd->fw_version == 0x020800 ||
+ etd->fw_version == 0x020b00 ||
+ etd->fw_version == 0x020030) {
+ *x_min = ETP_XMIN_V2;
+ *y_min = ETP_YMIN_V2;
+ *x_max = ETP_XMAX_V2;
+ *y_max = ETP_YMAX_V2;
+ } else {
+ i = (etd->fw_version > 0x020800 &&
+ etd->fw_version < 0x020900) ? 1 : 2;
+ *x_min = 0;
+ *y_min = 0;
+ *x_max = (etd->capabilities[1] - i) * 64;
+ *y_max = (etd->capabilities[2] - i) * 64;
+ }
+ break;
+ }
+}
+
/*
* Set the appropriate event bits for the input subsystem
*/
@@ -475,6 +510,9 @@ static void elantech_set_input_params(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
+ unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0;
+
+ elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max);
__set_bit(EV_KEY, dev->evbit);
__set_bit(EV_ABS, dev->evbit);
@@ -492,18 +530,18 @@ static void elantech_set_input_params(struct psmouse *psmouse)
case 1:
/* Rocker button */
if (etd->fw_version < 0x020000 &&
- (etd->capabilities & ETP_CAP_HAS_ROCKER)) {
+ (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
__set_bit(BTN_FORWARD, dev->keybit);
__set_bit(BTN_BACK, dev->keybit);
}
- input_set_abs_params(dev, ABS_X, ETP_XMIN_V1, ETP_XMAX_V1, 0, 0);
- input_set_abs_params(dev, ABS_Y, ETP_YMIN_V1, ETP_YMAX_V1, 0, 0);
+ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
break;
case 2:
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
- input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
- input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
+ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
if (etd->reports_pressure) {
input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
ETP_PMAX_V2, 0, 0);
@@ -512,10 +550,12 @@ static void elantech_set_input_params(struct psmouse *psmouse)
}
__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
input_mt_init_slots(dev, 2);
- input_set_abs_params(dev, ABS_MT_POSITION_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
- input_set_abs_params(dev, ABS_MT_POSITION_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
break;
}
+
+ etd->y_max = y_max;
}
struct elantech_attr_data {
@@ -769,13 +809,14 @@ int elantech_init(struct psmouse *psmouse)
pr_info("assuming hardware version %d, firmware version %d.%d.%d\n",
etd->hw_version, param[0], param[1], param[2]);
- if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) {
+ if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
+ etd->capabilities)) {
pr_err("failed to query capabilities.\n");
goto init_fail;
}
pr_info("Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
- param[0], param[1], param[2]);
- etd->capabilities = param[0];
+ etd->capabilities[0], etd->capabilities[1],
+ etd->capabilities[2]);
/*
* This firmware suffers from misreporting coordinates when
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index 1c5894e..b54ea27 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -93,13 +93,14 @@ struct elantech_data {
unsigned char reg_25;
unsigned char reg_26;
unsigned char debug;
- unsigned char capabilities;
+ unsigned char capabilities[3];
bool paritycheck;
bool jumpy_cursor;
bool reports_pressure;
unsigned char hw_version;
unsigned int fw_version;
unsigned int single_finger_reports;
+ unsigned int y_max;
unsigned char parity[256];
};
--
1.7.6.4
From 91f395e84dc83707b01c69e297894dbf992a566e Mon Sep 17 00:00:00 2001
From: JJ Ding <jj_ding@emc.com.tw>
Date: Fri, 9 Sep 2011 10:27:42 -0700
Subject: Input: elantech - remove ETP_EDGE_FUZZ_V2
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Don't try to be too clever and remove ETP_EDGE_FUZZ_V2. X, Y ranges
should be just the raw resolution of the device. Otherwise, they can
cause underflow on the Y axis.
Suggested-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/elantech.h | 15 ++++++---------
1 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index b54ea27..d9e6144 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -66,16 +66,13 @@
#define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1)
/*
- * It seems the resolution for hardware version 2 doubled.
- * Hence the X and Y ranges are doubled too.
- * The bezel around the pad also appears to be smaller
+ * The resolution for older v2 hardware doubled.
+ * (newer v2's firmware provides command so we can query)
*/
-#define ETP_EDGE_FUZZ_V2 8
-
-#define ETP_XMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2)
-#define ETP_XMAX_V2 (1152 - ETP_EDGE_FUZZ_V2)
-#define ETP_YMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2)
-#define ETP_YMAX_V2 ( 768 - ETP_EDGE_FUZZ_V2)
+#define ETP_XMIN_V2 0
+#define ETP_XMAX_V2 1152
+#define ETP_YMIN_V2 0
+#define ETP_YMAX_V2 768
#define ETP_PMIN_V2 0
#define ETP_PMAX_V2 255
--
1.7.6.4
From cc66bde05d267cce5a6f64d877e63036505cc31e Mon Sep 17 00:00:00 2001
From: JJ Ding <jj_ding@emc.com.tw>
Date: Fri, 9 Sep 2011 10:28:04 -0700
Subject: Input: elantech - packet checking for v2 hardware
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
For v2 hardware, there is no real parity check, but we can still check
some constant bits for data integrity.
Also rename elantech_check_parity_v1 to elantech_packet_check_v1 to make
these packet checking function names consistent.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/elantech.c | 39 ++++++++++++++++++++++++++++++++++-----
1 files changed, 34 insertions(+), 5 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 296b6a6..f2e3a2b 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -350,7 +350,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
input_sync(dev);
}
-static int elantech_check_parity_v1(struct psmouse *psmouse)
+static int elantech_packet_check_v1(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
@@ -374,6 +374,34 @@ static int elantech_check_parity_v1(struct psmouse *psmouse)
etd->parity[packet[3]] == p3;
}
+static int elantech_packet_check_v2(struct psmouse *psmouse)
+{
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+
+ /*
+ * V2 hardware has two flavors. Older ones that do not report pressure,
+ * and newer ones that reports pressure and width. With newer ones, all
+ * packets (1, 2, 3 finger touch) have the same constant bits. With
+ * older ones, 1/3 finger touch packets and 2 finger touch packets
+ * have different constant bits.
+ * With all three cases, if the constant bits are not exactly what I
+ * expected, I consider them invalid.
+ */
+ if (etd->reports_pressure)
+ return (packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x0f) == 0x02;
+
+ if ((packet[0] & 0xc0) == 0x80)
+ return (packet[0] & 0x0c) == 0x0c &&
+ (packet[3] & 0x0e) == 0x08;
+
+ return (packet[0] & 0x3c) == 0x3c &&
+ (packet[1] & 0xf0) == 0x00 &&
+ (packet[3] & 0x3e) == 0x38 &&
+ (packet[4] & 0xf0) == 0x00;
+}
+
/*
* Process byte stream from mouse and handle complete packets
*/
@@ -389,14 +417,16 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
switch (etd->hw_version) {
case 1:
- if (etd->paritycheck && !elantech_check_parity_v1(psmouse))
+ if (etd->paritycheck && !elantech_packet_check_v1(psmouse))
return PSMOUSE_BAD_DATA;
elantech_report_absolute_v1(psmouse);
break;
case 2:
- /* We don't know how to check parity in protocol v2 */
+ if (etd->paritycheck && !elantech_packet_check_v2(psmouse))
+ return PSMOUSE_BAD_DATA;
+
elantech_report_absolute_v2(psmouse);
break;
}
@@ -795,8 +825,7 @@ int elantech_init(struct psmouse *psmouse)
etd->hw_version = 2;
/* For now show extra debug information */
etd->debug = 1;
- /* Don't know how to do parity checking for version 2 */
- etd->paritycheck = 0;
+ etd->paritycheck = 1;
if (etd->fw_version >= 0x020800)
etd->reports_pressure = true;
--
1.7.6.4
From 7e1abba14d70426b251ee58451ab1671af425409 Mon Sep 17 00:00:00 2001
From: JJ Ding <jj_ding@emc.com.tw>
Date: Fri, 9 Sep 2011 10:28:19 -0700
Subject: Input: elantech - clean up elantech_init
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Group property setting code into elantech_set_properties.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/elantech.c | 69 ++++++++++++++++++++++-----------------
1 files changed, 39 insertions(+), 30 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index f2e3a2b..1ab1c14 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -791,6 +791,42 @@ static int elantech_reconnect(struct psmouse *psmouse)
}
/*
+ * determine hardware version and set some properties according to it.
+ */
+static void elantech_set_properties(struct elantech_data *etd)
+{
+ /*
+ * Assume every version greater than 0x020030 is new EeePC style
+ * hardware with 6 byte packets, except 0x020600
+ */
+ if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
+ etd->hw_version = 1;
+ else
+ etd->hw_version = 2;
+
+ /*
+ * Turn on packet checking by default.
+ */
+ etd->paritycheck = 1;
+
+ /*
+ * This firmware suffers from misreporting coordinates when
+ * a touch action starts causing the mouse cursor or scrolled page
+ * to jump. Enable a workaround.
+ */
+ etd->jumpy_cursor =
+ (etd->fw_version == 0x020022 || etd->fw_version == 0x020600);
+
+ if (etd->hw_version == 2) {
+ /* For now show extra debug information */
+ etd->debug = 1;
+
+ if (etd->fw_version >= 0x020800)
+ etd->reports_pressure = true;
+ }
+}
+
+/*
* Initialize the touchpad and create sysfs entries
*/
int elantech_init(struct psmouse *psmouse)
@@ -816,26 +852,9 @@ int elantech_init(struct psmouse *psmouse)
}
etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
-
- /*
- * Assume every version greater than this is new EeePC style
- * hardware with 6 byte packets
- */
- if (etd->fw_version >= 0x020030) {
- etd->hw_version = 2;
- /* For now show extra debug information */
- etd->debug = 1;
- etd->paritycheck = 1;
-
- if (etd->fw_version >= 0x020800)
- etd->reports_pressure = true;
-
- } else {
- etd->hw_version = 1;
- etd->paritycheck = 1;
- }
-
- pr_info("assuming hardware version %d, firmware version %d.%d.%d\n",
+ elantech_set_properties(etd);
+ pr_info("assuming hardware version %d "
+ "(with firmware version 0x%02x%02x%02x)\n",
etd->hw_version, param[0], param[1], param[2]);
if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
@@ -847,16 +866,6 @@ int elantech_init(struct psmouse *psmouse)
etd->capabilities[0], etd->capabilities[1],
etd->capabilities[2]);
- /*
- * This firmware suffers from misreporting coordinates when
- * a touch action starts causing the mouse cursor or scrolled page
- * to jump. Enable a workaround.
- */
- if (etd->fw_version == 0x020022 || etd->fw_version == 0x020600) {
- pr_info("firmware version 2.0.34/2.6.0 detected, enabling jumpy cursor workaround\n");
- etd->jumpy_cursor = true;
- }
-
if (elantech_set_absolute_mode(psmouse)) {
pr_err("failed to put touchpad into absolute mode.\n");
goto init_fail;
--
1.7.6.4
From 709d9ebd2853032df0599c30d5ac61c8397679f3 Mon Sep 17 00:00:00 2001
From: JJ Ding <jj_ding@emc.com.tw>
Date: Fri, 9 Sep 2011 10:30:31 -0700
Subject: Input: elantech - add v3 hardware support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
v3 hardware's packet format is almost identical to v2 (one/three finger touch),
except when sensing two finger touch, the hardware sends 12 bytes of data.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
Documentation/input/elantech.txt | 117 +++++++++++++++++++--
drivers/input/mouse/elantech.c | 208 ++++++++++++++++++++++++++++++++++----
drivers/input/mouse/elantech.h | 12 ++
3 files changed, 306 insertions(+), 31 deletions(-)
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index bce9941..cee08ee 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -16,15 +16,22 @@ Contents
1. Introduction
2. Extra knobs
- 3. Hardware version 1
- 3.1 Registers
- 3.2 Native relative mode 4 byte packet format
- 3.3 Native absolute mode 4 byte packet format
- 4. Hardware version 2
+ 3. Differentiating hardware versions
+ 4. Hardware version 1
4.1 Registers
- 4.2 Native absolute mode 6 byte packet format
- 4.2.1 One finger touch
- 4.2.2 Two finger touch
+ 4.2 Native relative mode 4 byte packet format
+ 4.3 Native absolute mode 4 byte packet format
+ 5. Hardware version 2
+ 5.1 Registers
+ 5.2 Native absolute mode 6 byte packet format
+ 5.2.1 Parity checking and packet re-synchronization
+ 5.2.2 One/Three finger touch
+ 5.2.3 Two finger touch
+ 6. Hardware version 3
+ 6.1 Registers
+ 6.2 Native absolute mode 6 byte packet format
+ 6.2.1 One/Three finger touch
+ 6.2.2 Two finger touch
@@ -375,7 +382,7 @@ For all the other ones, there are just a few constant bits:
In case an error is detected, all the packets are shifted by one (and packet[0] is discarded).
-5.2.1 One/Three finger touch
+5.2.2 One/Three finger touch
~~~~~~~~~~~~~~~~
byte 0:
@@ -384,7 +391,7 @@ byte 0:
n1 n0 w3 w2 . . R L
L, R = 1 when Left, Right mouse button pressed
- n1..n0 = numbers of fingers on touchpad
+ n1..n0 = number of fingers on touchpad
byte 1:
@@ -432,7 +439,7 @@ byte 5:
y11..y0 = absolute y value (vertical)
-4.2.2 Two finger touch
+5.2.3 Two finger touch
~~~~~~~~~~~~~~~~
Note that the two pairs of coordinates are not exactly the coordinates of the
@@ -446,7 +453,7 @@ byte 0:
n1 n0 ay8 ax8 . . R L
L, R = 1 when Left, Right mouse button pressed
- n1..n0 = numbers of fingers on touchpad
+ n1..n0 = number of fingers on touchpad
byte 1:
@@ -480,3 +487,89 @@ byte 5:
by7 by8 by5 by4 by3 by2 by1 by0
by8..by0 = upper-right finger absolute y value
+
+/////////////////////////////////////////////////////////////////////////////
+
+6. Hardware version 3
+ ==================
+
+6.1 Registers
+ ~~~~~~~~~
+* reg_10
+
+ bit 7 6 5 4 3 2 1 0
+ 0 0 0 0 0 0 0 A
+
+ A: 1 = enable absolute tracking
+
+6.2 Native absolute mode 6 byte packet format
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+1 and 3 finger touch shares the same 6-byte packet format, except that
+3 finger touch only reports the position of the center of all three fingers.
+
+Firmware would send 12 bytes of data for 2 finger touch.
+
+Note on debounce:
+In case the box has unstable power supply or other electricity issues, or
+when number of finger changes, F/W would send "debounce packet" to inform
+driver that the hardware is in debounce status.
+The debouce packet has the following signature:
+ byte 0: 0xc4
+ byte 1: 0xff
+ byte 2: 0xff
+ byte 3: 0x02
+ byte 4: 0xff
+ byte 5: 0xff
+When we encounter this kind of packet, we just ignore it.
+
+6.2.1 One/Three finger touch
+ ~~~~~~~~~~~~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ n1 n0 w3 w2 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+ n1..n0 = number of fingers on touchpad
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ p7 p6 p5 p4 x11 x10 x9 x8
+
+byte 2:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x11..x0 = absolute x value (horizontal)
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ 0 0 w1 w0 0 0 1 0
+
+ w3..w0 = width of the finger touch
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ p3 p1 p2 p0 y11 y10 y9 y8
+
+ p7..p0 = pressure
+
+byte 5:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y11..y0 = absolute y value (vertical)
+
+6.2.2 Two finger touch
+ ~~~~~~~~~~~~~~~~
+
+The packet format is exactly the same for two finger touch, except the hardware
+sends two 6 byte packets. The first packet contains data for the first finger,
+the second packet has data for the second finger. So for two finger touch a
+total of 12 bytes are sent.
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 1ab1c14..9cfc70a 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -108,6 +108,16 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
rc = -1;
}
break;
+
+ case 3:
+ if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, reg) ||
+ elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
+ rc = -1;
+ }
+ break;
}
if (rc)
@@ -154,6 +164,18 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
rc = -1;
}
break;
+
+ case 3:
+ if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, reg) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, val) ||
+ elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
+ rc = -1;
+ }
+ break;
}
if (rc)
@@ -350,6 +372,84 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
input_sync(dev);
}
+/*
+ * Interpret complete data packets and report absolute mode input events for
+ * hardware version 3. (12 byte packets for two fingers)
+ */
+static void elantech_report_absolute_v3(struct psmouse *psmouse,
+ int packet_type)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
+ unsigned int width = 0, pres = 0;
+
+ /* byte 0: n1 n0 . . . . R L */
+ fingers = (packet[0] & 0xc0) >> 6;
+
+ switch (fingers) {
+ case 3:
+ case 1:
+ /*
+ * byte 1: . . . . x11 x10 x9 x8
+ * byte 2: x7 x6 x5 x4 x4 x2 x1 x0
+ */
+ x1 = ((packet[1] & 0x0f) << 8) | packet[2];
+ /*
+ * byte 4: . . . . y11 y10 y9 y8
+ * byte 5: y7 y6 y5 y4 y3 y2 y1 y0
+ */
+ y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ break;
+
+ case 2:
+ if (packet_type == PACKET_V3_HEAD) {
+ /*
+ * byte 1: . . . . ax11 ax10 ax9 ax8
+ * byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
+ */
+ etd->prev_x = ((packet[1] & 0x0f) << 8) | packet[2];
+ /*
+ * byte 4: . . . . ay11 ay10 ay9 ay8
+ * byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
+ */
+ etd->prev_y = etd->y_max -
+ (((packet[4] & 0x0f) << 8) | packet[5]);
+ /*
+ * wait for next packet
+ */
+ return;
+ }
+
+ /* packet_type == PACKET_V3_TAIL */
+ x1 = etd->prev_x;
+ y1 = etd->prev_y;
+ x2 = ((packet[1] & 0x0f) << 8) | packet[2];
+ y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ break;
+ }
+
+ pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
+ width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
+
+ input_report_key(dev, BTN_TOUCH, fingers != 0);
+ if (fingers != 0) {
+ input_report_abs(dev, ABS_X, x1);
+ input_report_abs(dev, ABS_Y, y1);
+ }
+ elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+ input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
+ input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
+ input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+ input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+ input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+ input_report_abs(dev, ABS_PRESSURE, pres);
+ input_report_abs(dev, ABS_TOOL_WIDTH, width);
+
+ input_sync(dev);
+}
+
static int elantech_packet_check_v1(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
@@ -403,11 +503,37 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
}
/*
+ * We check the constant bits to determine what packet type we get,
+ * so packet checking is mandatory for v3 hardware.
+ */
+static int elantech_packet_check_v3(struct psmouse *psmouse)
+{
+ const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff };
+ unsigned char *packet = psmouse->packet;
+
+ /*
+ * check debounce first, it has the same signature in byte 0
+ * and byte 3 as PACKET_V3_HEAD.
+ */
+ if (!memcmp(packet, debounce_packet, sizeof(debounce_packet)))
+ return PACKET_DEBOUNCE;
+
+ if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02)
+ return PACKET_V3_HEAD;
+
+ if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c)
+ return PACKET_V3_TAIL;
+
+ return PACKET_UNKNOWN;
+}
+
+/*
* Process byte stream from mouse and handle complete packets
*/
static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
+ int packet_type;
if (psmouse->pktcnt < psmouse->pktsize)
return PSMOUSE_GOOD_DATA;
@@ -429,6 +555,18 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
elantech_report_absolute_v2(psmouse);
break;
+
+ case 3:
+ packet_type = elantech_packet_check_v3(psmouse);
+ /* ignore debounce */
+ if (packet_type == PACKET_DEBOUNCE)
+ return PSMOUSE_FULL_PACKET;
+
+ if (packet_type == PACKET_UNKNOWN)
+ return PSMOUSE_BAD_DATA;
+
+ elantech_report_absolute_v3(psmouse, packet_type);
+ break;
}
return PSMOUSE_FULL_PACKET;
@@ -463,8 +601,15 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
elantech_write_reg(psmouse, 0x11, etd->reg_11) ||
elantech_write_reg(psmouse, 0x21, etd->reg_21)) {
rc = -1;
- break;
}
+ break;
+
+ case 3:
+ etd->reg_10 = 0x0b;
+ if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
+ rc = -1;
+
+ break;
}
if (rc == 0) {
@@ -498,11 +643,12 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
return rc;
}
-static void elantech_set_range(struct psmouse *psmouse,
- unsigned int *x_min, unsigned int *y_min,
- unsigned int *x_max, unsigned int *y_max)
+static int elantech_set_range(struct psmouse *psmouse,
+ unsigned int *x_min, unsigned int *y_min,
+ unsigned int *x_max, unsigned int *y_max)
{
struct elantech_data *etd = psmouse->private;
+ unsigned char param[3];
int i;
switch (etd->hw_version) {
@@ -530,19 +676,30 @@ static void elantech_set_range(struct psmouse *psmouse,
*y_max = (etd->capabilities[2] - i) * 64;
}
break;
+
+ case 3:
+ if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -1;
+
+ *x_max = (0x0f & param[0]) << 8 | param[1];
+ *y_max = (0xf0 & param[0]) << 4 | param[2];
+ break;
}
+
+ return 0;
}
/*
* Set the appropriate event bits for the input subsystem
*/
-static void elantech_set_input_params(struct psmouse *psmouse)
+static int elantech_set_input_params(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0;
- elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max);
+ if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max))
+ return -1;
__set_bit(EV_KEY, dev->evbit);
__set_bit(EV_ABS, dev->evbit);
@@ -570,6 +727,9 @@ static void elantech_set_input_params(struct psmouse *psmouse)
case 2:
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
+ __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
+ /* fall through */
+ case 3:
input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
if (etd->reports_pressure) {
@@ -578,7 +738,6 @@ static void elantech_set_input_params(struct psmouse *psmouse)
input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
ETP_WMAX_V2, 0, 0);
}
- __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
input_mt_init_slots(dev, 2);
input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
@@ -586,6 +745,8 @@ static void elantech_set_input_params(struct psmouse *psmouse)
}
etd->y_max = y_max;
+
+ return 0;
}
struct elantech_attr_data {
@@ -727,7 +888,8 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
* Report this in case there are Elantech models that use a different
* set of magic numbers
*/
- if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
+ if (param[0] != 0x3c || param[1] != 0x03 ||
+ (param[2] != 0xc8 && param[2] != 0x00)) {
pr_debug("unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
param[0], param[1], param[2]);
return -1;
@@ -793,16 +955,16 @@ static int elantech_reconnect(struct psmouse *psmouse)
/*
* determine hardware version and set some properties according to it.
*/
-static void elantech_set_properties(struct elantech_data *etd)
+static int elantech_set_properties(struct elantech_data *etd)
{
- /*
- * Assume every version greater than 0x020030 is new EeePC style
- * hardware with 6 byte packets, except 0x020600
- */
if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
etd->hw_version = 1;
- else
+ else if (etd->fw_version < 0x150600)
etd->hw_version = 2;
+ else if ((etd->fw_version & 0x0f0000) >> 16 == 5)
+ etd->hw_version = 3;
+ else
+ return -1;
/*
* Turn on packet checking by default.
@@ -817,13 +979,15 @@ static void elantech_set_properties(struct elantech_data *etd)
etd->jumpy_cursor =
(etd->fw_version == 0x020022 || etd->fw_version == 0x020600);
- if (etd->hw_version == 2) {
+ if (etd->hw_version > 1) {
/* For now show extra debug information */
etd->debug = 1;
if (etd->fw_version >= 0x020800)
etd->reports_pressure = true;
}
+
+ return 0;
}
/*
@@ -850,9 +1014,12 @@ int elantech_init(struct psmouse *psmouse)
pr_err("failed to query firmware version.\n");
goto init_fail;
}
-
etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
- elantech_set_properties(etd);
+
+ if (elantech_set_properties(etd)) {
+ pr_err("unknown hardware version, aborting...\n");
+ goto init_fail;
+ }
pr_info("assuming hardware version %d "
"(with firmware version 0x%02x%02x%02x)\n",
etd->hw_version, param[0], param[1], param[2]);
@@ -871,7 +1038,10 @@ int elantech_init(struct psmouse *psmouse)
goto init_fail;
}
- elantech_set_input_params(psmouse);
+ if (elantech_set_input_params(psmouse)) {
+ pr_err("failed to query touchpad range.\n");
+ goto init_fail;
+ }
error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
&elantech_attr_group);
@@ -883,7 +1053,7 @@ int elantech_init(struct psmouse *psmouse)
psmouse->protocol_handler = elantech_process_byte;
psmouse->disconnect = elantech_disconnect;
psmouse->reconnect = elantech_reconnect;
- psmouse->pktsize = etd->hw_version == 2 ? 6 : 4;
+ psmouse->pktsize = etd->hw_version > 1 ? 6 : 4;
return 0;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index d9e6144..236c33c 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -16,6 +16,7 @@
/*
* Command values for Synaptics style queries
*/
+#define ETP_FW_ID_QUERY 0x00
#define ETP_FW_VERSION_QUERY 0x01
#define ETP_CAPABILITIES_QUERY 0x02
@@ -24,6 +25,7 @@
*/
#define ETP_REGISTER_READ 0x10
#define ETP_REGISTER_WRITE 0x11
+#define ETP_REGISTER_READWRITE 0x00
/*
* Hardware version 2 custom PS/2 command value
@@ -79,6 +81,14 @@
#define ETP_WMIN_V2 0
#define ETP_WMAX_V2 15
+/*
+ * v3 hardware has 2 kinds of packet types.
+ */
+#define PACKET_UNKNOWN 0x01
+#define PACKET_DEBOUNCE 0x02
+#define PACKET_V3_HEAD 0x03
+#define PACKET_V3_TAIL 0x04
+
struct elantech_data {
unsigned char reg_10;
unsigned char reg_11;
@@ -98,6 +108,8 @@ struct elantech_data {
unsigned int fw_version;
unsigned int single_finger_reports;
unsigned int y_max;
+ unsigned int prev_x;
+ unsigned int prev_y;
unsigned char parity[256];
};
--
1.7.6.4
From 5936f37c68ab27b24d6f2faf23268a9aefd3092e Mon Sep 17 00:00:00 2001
From: JJ Ding <jj_ding@emc.com.tw>
Date: Fri, 9 Sep 2011 10:31:58 -0700
Subject: Input: elantech - add v4 hardware support
v4 hardware is a true multitouch capable touchpad (up to 5 fingers).
The packet format is quite complex, please see protocol document for
reference.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
Documentation/input/elantech.txt | 170 ++++++++++++++++++++++++++
drivers/input/mouse/elantech.c | 249 ++++++++++++++++++++++++++++++++++++--
drivers/input/mouse/elantech.h | 29 ++++-
3 files changed, 432 insertions(+), 16 deletions(-)
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index cee08ee..5602eb7 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -32,6 +32,12 @@ Contents
6.2 Native absolute mode 6 byte packet format
6.2.1 One/Three finger touch
6.2.2 Two finger touch
+ 7. Hardware version 4
+ 7.1 Registers
+ 7.2 Native absolute mode 6 byte packet format
+ 7.2.1 Status packet
+ 7.2.2 Head packet
+ 7.2.3 Motion packet
@@ -573,3 +579,167 @@ The packet format is exactly the same for two finger touch, except the hardware
sends two 6 byte packets. The first packet contains data for the first finger,
the second packet has data for the second finger. So for two finger touch a
total of 12 bytes are sent.
+
+/////////////////////////////////////////////////////////////////////////////
+
+7. Hardware version 4
+ ==================
+
+7.1 Registers
+ ~~~~~~~~~
+* reg_07
+
+ bit 7 6 5 4 3 2 1 0
+ 0 0 0 0 0 0 0 A
+
+ A: 1 = enable absolute tracking
+
+7.2 Native absolute mode 6 byte packet format
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+v4 hardware is a true multitouch touchpad, capable of tracking up to 5 fingers.
+Unfortunately, due to PS/2's limited bandwidth, its packet format is rather
+complex.
+
+Whenever the numbers or identities of the fingers changes, the hardware sends a
+status packet to indicate how many and which fingers is on touchpad, followed by
+head packets or motion packets. A head packet contains data of finger id, finger
+position (absolute x, y values), width, and pressure. A motion packet contains
+two fingers' position delta.
+
+For example, when status packet tells there are 2 fingers on touchpad, then we
+can expect two following head packets. If the finger status doesn't change,
+the following packets would be motion packets, only sending delta of finger
+position, until we receive a status packet.
+
+One exception is one finger touch. when a status packet tells us there is only
+one finger, the hardware would just send head packets afterwards.
+
+7.2.1 Status packet
+ ~~~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ . . . . 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ . . . ft4 ft3 ft2 ft1 ft0
+
+ ft4 ft3 ft2 ft1 ft0 ftn = 1 when finger n is on touchpad
+
+byte 2: not used
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ . . . 1 0 0 0 0
+
+ constant bits
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ p . . . . . . .
+
+ p = 1 for palm
+
+byte 5: not used
+
+7.2.2 Head packet
+ ~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ w3 w2 w1 w0 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+ w3..w0 = finger width (spans how many trace lines)
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ p7 p6 p5 p4 x11 x10 x9 x8
+
+byte 2:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x11..x0 = absolute x value (horizontal)
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ id2 id1 id0 1 0 0 0 1
+
+ id2..id0 = finger id
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ p3 p1 p2 p0 y11 y10 y9 y8
+
+ p7..p0 = pressure
+
+byte 5:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y11..y0 = absolute y value (vertical)
+
+7.2.3 Motion packet
+ ~~~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ id2 id1 id0 w 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+ id2..id0 = finger id
+ w = 1 when delta overflows (> 127 or < -128), in this case
+ firmware sends us (delta x / 5) and (delta y / 5)
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x7..x0 = delta x (two's complement)
+
+byte 2:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y7..y0 = delta y (two's complement)
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ id2 id1 id0 1 0 0 1 0
+
+ id2..id0 = finger id
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x7..x0 = delta x (two's complement)
+
+byte 5:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y7..y0 = delta y (two's complement)
+
+ byte 0 ~ 2 for one finger
+ byte 3 ~ 5 for another
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 9cfc70a..b8733b3 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -84,7 +84,7 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
unsigned char param[3];
int rc = 0;
- if (reg < 0x10 || reg > 0x26)
+ if (reg < 0x07 || reg > 0x26)
return -1;
if (reg > 0x11 && reg < 0x20)
@@ -109,7 +109,7 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
}
break;
- case 3:
+ case 3 ... 4:
if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
@@ -122,8 +122,10 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
if (rc)
pr_err("failed to read register 0x%02x.\n", reg);
- else
+ else if (etd->hw_version != 4)
*val = param[0];
+ else
+ *val = param[1];
return rc;
}
@@ -137,7 +139,7 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
struct elantech_data *etd = psmouse->private;
int rc = 0;
- if (reg < 0x10 || reg > 0x26)
+ if (reg < 0x07 || reg > 0x26)
return -1;
if (reg > 0x11 && reg < 0x20)
@@ -176,6 +178,20 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
rc = -1;
}
break;
+
+ case 4:
+ if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, reg) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, val) ||
+ elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
+ rc = -1;
+ }
+ break;
}
if (rc)
@@ -409,12 +425,12 @@ static void elantech_report_absolute_v3(struct psmouse *psmouse,
* byte 1: . . . . ax11 ax10 ax9 ax8
* byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
*/
- etd->prev_x = ((packet[1] & 0x0f) << 8) | packet[2];
+ etd->mt[0].x = ((packet[1] & 0x0f) << 8) | packet[2];
/*
* byte 4: . . . . ay11 ay10 ay9 ay8
* byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
*/
- etd->prev_y = etd->y_max -
+ etd->mt[0].y = etd->y_max -
(((packet[4] & 0x0f) << 8) | packet[5]);
/*
* wait for next packet
@@ -423,8 +439,8 @@ static void elantech_report_absolute_v3(struct psmouse *psmouse,
}
/* packet_type == PACKET_V3_TAIL */
- x1 = etd->prev_x;
- y1 = etd->prev_y;
+ x1 = etd->mt[0].x;
+ y1 = etd->mt[0].y;
x2 = ((packet[1] & 0x0f) << 8) | packet[2];
y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
break;
@@ -450,6 +466,129 @@ static void elantech_report_absolute_v3(struct psmouse *psmouse,
input_sync(dev);
}
+static void elantech_input_sync_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ unsigned char *packet = psmouse->packet;
+
+ input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+ input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+ input_mt_report_pointer_emulation(dev, true);
+ input_sync(dev);
+}
+
+static void process_packet_status_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ unsigned char *packet = psmouse->packet;
+ unsigned fingers;
+ int i;
+
+ /* notify finger state change */
+ fingers = packet[1] & 0x1f;
+ for (i = 0; i < ETP_MAX_FINGERS; i++) {
+ if ((fingers & (1 << i)) == 0) {
+ input_mt_slot(dev, i);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, false);
+ }
+ }
+
+ elantech_input_sync_v4(psmouse);
+}
+
+static void process_packet_head_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ int id = ((packet[3] & 0xe0) >> 5) - 1;
+ int pres, traces;
+
+ if (id < 0)
+ return;
+
+ etd->mt[id].x = ((packet[1] & 0x0f) << 8) | packet[2];
+ etd->mt[id].y = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
+ traces = (packet[0] & 0xf0) >> 4;
+
+ input_mt_slot(dev, id);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
+
+ input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
+ input_report_abs(dev, ABS_MT_PRESSURE, pres);
+ input_report_abs(dev, ABS_MT_TOUCH_MAJOR, traces * etd->width);
+ /* report this for backwards compatibility */
+ input_report_abs(dev, ABS_TOOL_WIDTH, traces);
+
+ elantech_input_sync_v4(psmouse);
+}
+
+static void process_packet_motion_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ int weight, delta_x1 = 0, delta_y1 = 0, delta_x2 = 0, delta_y2 = 0;
+ int id, sid;
+
+ id = ((packet[0] & 0xe0) >> 5) - 1;
+ if (id < 0)
+ return;
+
+ sid = ((packet[3] & 0xe0) >> 5) - 1;
+ weight = (packet[0] & 0x10) ? ETP_WEIGHT_VALUE : 1;
+ /*
+ * Motion packets give us the delta of x, y values of specific fingers,
+ * but in two's complement. Let the compiler do the conversion for us.
+ * Also _enlarge_ the numbers to int, in case of overflow.
+ */
+ delta_x1 = (signed char)packet[1];
+ delta_y1 = (signed char)packet[2];
+ delta_x2 = (signed char)packet[4];
+ delta_y2 = (signed char)packet[5];
+
+ etd->mt[id].x += delta_x1 * weight;
+ etd->mt[id].y -= delta_y1 * weight;
+ input_mt_slot(dev, id);
+ input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
+
+ if (sid >= 0) {
+ etd->mt[sid].x += delta_x2 * weight;
+ etd->mt[sid].y -= delta_y2 * weight;
+ input_mt_slot(dev, sid);
+ input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[sid].x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[sid].y);
+ }
+
+ elantech_input_sync_v4(psmouse);
+}
+
+static void elantech_report_absolute_v4(struct psmouse *psmouse,
+ int packet_type)
+{
+ switch (packet_type) {
+ case PACKET_V4_STATUS:
+ process_packet_status_v4(psmouse);
+ break;
+
+ case PACKET_V4_HEAD:
+ process_packet_head_v4(psmouse);
+ break;
+
+ case PACKET_V4_MOTION:
+ process_packet_motion_v4(psmouse);
+ break;
+
+ case PACKET_UNKNOWN:
+ default:
+ /* impossible to get here */
+ break;
+ }
+}
+
static int elantech_packet_check_v1(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
@@ -504,7 +643,7 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
/*
* We check the constant bits to determine what packet type we get,
- * so packet checking is mandatory for v3 hardware.
+ * so packet checking is mandatory for v3 and later hardware.
*/
static int elantech_packet_check_v3(struct psmouse *psmouse)
{
@@ -527,6 +666,25 @@ static int elantech_packet_check_v3(struct psmouse *psmouse)
return PACKET_UNKNOWN;
}
+static int elantech_packet_check_v4(struct psmouse *psmouse)
+{
+ unsigned char *packet = psmouse->packet;
+
+ if ((packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x1f) == 0x11)
+ return PACKET_V4_HEAD;
+
+ if ((packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x1f) == 0x12)
+ return PACKET_V4_MOTION;
+
+ if ((packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x1f) == 0x10)
+ return PACKET_V4_STATUS;
+
+ return PACKET_UNKNOWN;
+}
+
/*
* Process byte stream from mouse and handle complete packets
*/
@@ -567,6 +725,14 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
elantech_report_absolute_v3(psmouse, packet_type);
break;
+
+ case 4:
+ packet_type = elantech_packet_check_v4(psmouse);
+ if (packet_type == PACKET_UNKNOWN)
+ return PSMOUSE_BAD_DATA;
+
+ elantech_report_absolute_v4(psmouse, packet_type);
+ break;
}
return PSMOUSE_FULL_PACKET;
@@ -610,6 +776,13 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
rc = -1;
break;
+
+ case 4:
+ etd->reg_07 = 0x01;
+ if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
+ rc = -1;
+
+ goto skip_readback_reg_10; /* v4 has no reg 0x10 to read */
}
if (rc == 0) {
@@ -637,6 +810,7 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
}
}
+ skip_readback_reg_10:
if (rc)
pr_err("failed to initialise registers.\n");
@@ -645,10 +819,12 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
static int elantech_set_range(struct psmouse *psmouse,
unsigned int *x_min, unsigned int *y_min,
- unsigned int *x_max, unsigned int *y_max)
+ unsigned int *x_max, unsigned int *y_max,
+ unsigned int *width)
{
struct elantech_data *etd = psmouse->private;
unsigned char param[3];
+ unsigned char traces;
int i;
switch (etd->hw_version) {
@@ -684,6 +860,19 @@ static int elantech_set_range(struct psmouse *psmouse,
*x_max = (0x0f & param[0]) << 8 | param[1];
*y_max = (0xf0 & param[0]) << 4 | param[2];
break;
+
+ case 4:
+ if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -1;
+
+ *x_max = (0x0f & param[0]) << 8 | param[1];
+ *y_max = (0xf0 & param[0]) << 4 | param[2];
+ traces = etd->capabilities[1];
+ if ((traces < 2) || (traces > *x_max))
+ return -1;
+
+ *width = *x_max / (traces - 1);
+ break;
}
return 0;
@@ -696,9 +885,9 @@ static int elantech_set_input_params(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
- unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0;
+ unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0, width = 0;
- if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max))
+ if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width))
return -1;
__set_bit(EV_KEY, dev->evbit);
@@ -742,9 +931,37 @@ static int elantech_set_input_params(struct psmouse *psmouse)
input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
break;
+
+ case 4:
+ __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
+ /* For X to recognize me as touchpad. */
+ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
+ /*
+ * range of pressure and width is the same as v2,
+ * report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility.
+ */
+ input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
+ ETP_PMAX_V2, 0, 0);
+ input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
+ ETP_WMAX_V2, 0, 0);
+ /* Multitouch capable pad, up to 5 fingers. */
+ input_mt_init_slots(dev, ETP_MAX_FINGERS);
+ input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
+ input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2,
+ ETP_PMAX_V2, 0, 0);
+ /*
+ * The firmware reports how many trace lines the finger spans,
+ * convert to surface unit as Protocol-B requires.
+ */
+ input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0,
+ ETP_WMAX_V2 * width, 0, 0);
+ break;
}
etd->y_max = y_max;
+ etd->width = width;
return 0;
}
@@ -816,6 +1033,7 @@ static ssize_t elantech_set_int_attr(struct psmouse *psmouse,
elantech_show_int_attr, \
elantech_set_int_attr)
+ELANTECH_INT_ATTR(reg_07, 0x07);
ELANTECH_INT_ATTR(reg_10, 0x10);
ELANTECH_INT_ATTR(reg_11, 0x11);
ELANTECH_INT_ATTR(reg_20, 0x20);
@@ -829,6 +1047,7 @@ ELANTECH_INT_ATTR(debug, 0);
ELANTECH_INT_ATTR(paritycheck, 0);
static struct attribute *elantech_attrs[] = {
+ &psmouse_attr_reg_07.dattr.attr,
&psmouse_attr_reg_10.dattr.attr,
&psmouse_attr_reg_11.dattr.attr,
&psmouse_attr_reg_20.dattr.attr,
@@ -957,12 +1176,16 @@ static int elantech_reconnect(struct psmouse *psmouse)
*/
static int elantech_set_properties(struct elantech_data *etd)
{
+ int ver = (etd->fw_version & 0x0f0000) >> 16;
+
if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
etd->hw_version = 1;
else if (etd->fw_version < 0x150600)
etd->hw_version = 2;
- else if ((etd->fw_version & 0x0f0000) >> 16 == 5)
+ else if (ver == 5)
etd->hw_version = 3;
+ else if (ver == 6)
+ etd->hw_version = 4;
else
return -1;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index 236c33c..7ecaef0 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -82,14 +82,37 @@
#define ETP_WMAX_V2 15
/*
- * v3 hardware has 2 kinds of packet types.
+ * v3 hardware has 2 kinds of packet types,
+ * v4 hardware has 3.
*/
#define PACKET_UNKNOWN 0x01
#define PACKET_DEBOUNCE 0x02
#define PACKET_V3_HEAD 0x03
#define PACKET_V3_TAIL 0x04
+#define PACKET_V4_HEAD 0x05
+#define PACKET_V4_MOTION 0x06
+#define PACKET_V4_STATUS 0x07
+
+/*
+ * track up to 5 fingers for v4 hardware
+ */
+#define ETP_MAX_FINGERS 5
+
+/*
+ * weight value for v4 hardware
+ */
+#define ETP_WEIGHT_VALUE 5
+
+/*
+ * The base position for one finger, v4 hardware
+ */
+struct finger_pos {
+ unsigned int x;
+ unsigned int y;
+};
struct elantech_data {
+ unsigned char reg_07;
unsigned char reg_10;
unsigned char reg_11;
unsigned char reg_20;
@@ -108,8 +131,8 @@ struct elantech_data {
unsigned int fw_version;
unsigned int single_finger_reports;
unsigned int y_max;
- unsigned int prev_x;
- unsigned int prev_y;
+ unsigned int width;
+ struct finger_pos mt[ETP_MAX_FINGERS];
unsigned char parity[256];
};
--
1.7.6.4
From 3c09085f371a68f09147abb59b35db928fe3950f Mon Sep 17 00:00:00 2001
From: JJ Ding <jj_ding@emc.com.tw>
Date: Tue, 20 Sep 2011 22:42:51 -0700
Subject: Input: elantech - better support all those v2 variants
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
V2 hardware has many variants. This patch adddresses two issues:
- some model also has debounce packets, but with a different signature
than v3. Now we just check debounce for all v2 hardware.
- due to different scanning methods the hardware uses, x and y ranges have
to be calculated differently. And for some specific versions, we can just
see them as custom-made, so set {x, y} the same values as Windows driver
does.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Tested-by: Richard Schütz <r.schtz@t-online.de>
Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/elantech.c | 46 +++++++++++++++++++++++++++++++++++----
drivers/input/mouse/elantech.h | 1 +
2 files changed, 42 insertions(+), 5 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index b8733b3..c2d91eb 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -613,6 +613,18 @@ static int elantech_packet_check_v1(struct psmouse *psmouse)
etd->parity[packet[3]] == p3;
}
+static int elantech_debounce_check_v2(struct psmouse *psmouse)
+{
+ /*
+ * When we encounter packet that matches this exactly, it means the
+ * hardware is in debounce status. Just ignore the whole packet.
+ */
+ const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff, 0xff };
+ unsigned char *packet = psmouse->packet;
+
+ return !memcmp(packet, debounce_packet, sizeof(debounce_packet));
+}
+
static int elantech_packet_check_v2(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
@@ -708,6 +720,10 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
break;
case 2:
+ /* ignore debounce */
+ if (elantech_debounce_check_v2(psmouse))
+ return PSMOUSE_FULL_PACKET;
+
if (etd->paritycheck && !elantech_packet_check_v2(psmouse))
return PSMOUSE_BAD_DATA;
@@ -825,7 +841,6 @@ static int elantech_set_range(struct psmouse *psmouse,
struct elantech_data *etd = psmouse->private;
unsigned char param[3];
unsigned char traces;
- int i;
switch (etd->hw_version) {
case 1:
@@ -844,12 +859,33 @@ static int elantech_set_range(struct psmouse *psmouse,
*x_max = ETP_XMAX_V2;
*y_max = ETP_YMAX_V2;
} else {
+ int i;
+ int fixed_dpi;
+
i = (etd->fw_version > 0x020800 &&
etd->fw_version < 0x020900) ? 1 : 2;
- *x_min = 0;
- *y_min = 0;
- *x_max = (etd->capabilities[1] - i) * 64;
- *y_max = (etd->capabilities[2] - i) * 64;
+
+ if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -1;
+
+ fixed_dpi = param[1] & 0x10;
+
+ if (((etd->fw_version >> 16) == 0x14) && fixed_dpi) {
+ if (synaptics_send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
+ return -1;
+
+ *x_max = (etd->capabilities[1] - i) * param[1] / 2;
+ *y_max = (etd->capabilities[2] - i) * param[2] / 2;
+ } else if (etd->fw_version == 0x040216) {
+ *x_max = 819;
+ *y_max = 405;
+ } else if (etd->fw_version == 0x040219 || etd->fw_version == 0x040215) {
+ *x_max = 900;
+ *y_max = 500;
+ } else {
+ *x_max = (etd->capabilities[1] - i) * 64;
+ *y_max = (etd->capabilities[2] - i) * 64;
+ }
}
break;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index 7ecaef0..9e5f1aa 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -19,6 +19,7 @@
#define ETP_FW_ID_QUERY 0x00
#define ETP_FW_VERSION_QUERY 0x01
#define ETP_CAPABILITIES_QUERY 0x02
+#define ETP_SAMPLE_QUERY 0x03
/*
* Command values for register reading or writing
--
1.7.6.4
From 6c0ec284648f0346e96b0079999cb7af055f58ab Mon Sep 17 00:00:00 2001
From: JJ Ding <jj_ding@emc.com.tw>
Date: Tue, 20 Sep 2011 22:42:51 -0700
Subject: Input: elantech - remove module parameter force_elantech
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This essentially reverts commit f81bc788ff91d4efd4baf88b2c29713838caa8e5.
With recent work on elantech driver, I believe we now have complete support
for all elantech touchpads. So remove this hack.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/elantech.c | 12 ++----------
1 files changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index c2d91eb..25290b3 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -28,10 +28,6 @@
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \
} while (0)
-static bool force_elantech;
-module_param_named(force_elantech, force_elantech, bool, 0644);
-MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default).");
-
/*
* Send a Synaptics style sliced query command
*/
@@ -1164,12 +1160,8 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
param[0], param[1], param[2]);
if (!elantech_is_signature_valid(param)) {
- if (!force_elantech) {
- pr_debug("Probably not a real Elantech touchpad. Aborting.\n");
- return -1;
- }
-
- pr_debug("Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n");
+ pr_debug("Probably not a real Elantech touchpad. Aborting.\n");
+ return -1;
}
if (set_properties) {
--
1.7.6.4