rpms / kexec-tools

Clone
Source Code
GIT

Files

direct_nm f10 f11 f12 f13 f14 f15 f16 f17 f18 f19 f20 f21 f22 f23 f24 f25 f26 f27 f28 f29 f30 f31 f32 f33 f34 f35 f36 f37 f38 f39 f40 f7 f8 f9 main private-nhorman-bz197695-branch rawhide
  1.   f28
  2.   kexec-tools.spec
Blob Blame History Raw 
Name: kexec-tools
Version: 2.0.17
Release: 3%{?dist}
License: GPLv2
Group: Applications/System
Summary: The kexec/kdump userspace component

Source0: http://kernel.org/pub/linux/utils/kernel/kexec/%{name}-%{version}.tar.xz
Source1: kdumpctl
Source2: kdump.sysconfig
Source3: kdump.sysconfig.x86_64
Source4: kdump.sysconfig.i386
Source5: kdump.sysconfig.ppc64
Source7: mkdumprd
Source8: kdump.conf
Source9: http://downloads.sourceforge.net/project/makedumpfile/makedumpfile/1.6.3/makedumpfile-1.6.3.tar.gz
Source10: kexec-kdump-howto.txt
Source12: mkdumprd.8
Source14: 98-kexec.rules
Source15: kdump.conf.5
Source16: kdump.service
Source18: kdump.sysconfig.s390x
Source19: eppic_050615.tar.gz
Source20: kdump-lib.sh
Source21: kdump-in-cluster-environment.txt
Source22: kdump-dep-generator.sh
Source23: kdump-anaconda-addon-005-31-g31ab4b7.tar.gz
Source24: kdump-lib-initramfs.sh
Source25: kdump.sysconfig.ppc64le
Source26: kdumpctl.8
Source27: live-image-kdump-howto.txt
Source28: early-kdump-howto.txt

#######################################
# These are sources for mkdumpramfs
# Which is currently in development
#######################################
Source100: dracut-kdump.sh
Source101: dracut-module-setup.sh
Source102: dracut-monitor_dd_progress
Source103: dracut-kdump-error-handler.sh
Source104: dracut-kdump-emergency.service
Source105: dracut-kdump-error-handler.service
Source106: dracut-kdump-capture.service
Source107: dracut-kdump-emergency.target
Source108: dracut-early-kdump.sh
Source109: dracut-early-kdump-module-setup.sh

Requires(post): systemd-units
Requires(preun): systemd-units
Requires(postun): systemd-units
Requires(pre): coreutils sed zlib 
Requires: dracut >= 046-7
Requires: dracut-network >= 044-117
Requires: ethtool
BuildRequires: zlib-devel zlib zlib-static elfutils-devel-static glib2-devel bzip2-devel ncurses-devel bison flex lzo-devel snappy-devel
BuildRequires: pkgconfig intltool gettext 
BuildRequires: systemd-units
BuildRequires: automake autoconf libtool
%ifarch %{ix86} x86_64 ppc64 ppc s390x ppc64le
Obsoletes: diskdumputils netdump kexec-tools-eppic
%endif

%undefine _hardened_build

#START INSERT

#
# Patches 0 through 100 are meant for x86 kexec-tools enablement
#

#
# Patches 101 through 200 are meant for x86_64 kexec-tools enablement
#

#
# Patches 301 through 400 are meant for ppc64 kexec-tools enablement
#

#
# Patches 401 through 500 are meant for s390 kexec-tools enablement
#
#
# Patches 501 through 600 are meant for ARM kexec-tools enablement
#

#
# Patches 601 onward are generic patches
#
Patch601: kexec-tools-2.0.3-disable-kexec-test.patch
Patch604: kexec-tools-2.0.16-koji-build-fail-workaround.patch

%description
kexec-tools provides /sbin/kexec binary that facilitates a new
kernel to boot using the kernel's kexec feature either on a
normal or a panic reboot. This package contains the /sbin/kexec
binary and ancillary utilities that together form the userspace
component of the kernel's kexec feature.

%package anaconda-addon
Summary: Kdump configuration anaconda addon
Requires: anaconda >= 21.33
%description anaconda-addon
Kdump anaconda addon

%prep
%setup -q 

mkdir -p -m755 kcp
tar -z -x -v -f %{SOURCE9}
tar -z -x -v -f %{SOURCE19}
tar -z -x -v -f %{SOURCE23}

%patch601 -p1
%patch604 -p1

%ifarch ppc
%define archdef ARCH=ppc
%endif

%build
autoreconf
%configure \
%ifarch ppc64
    --host=powerpc64-redhat-linux-gnu \
    --build=powerpc64-redhat-linux-gnu \
%endif
%ifarch ppc64le
    --host=powerpc64le-redhat-linux-gnu \
    --build=powerpc64le-redhat-linux-gnu \
%endif
    --sbindir=/sbin
rm -f kexec-tools.spec.in
# setup the docs
cp %{SOURCE10} .
cp %{SOURCE21} .
cp %{SOURCE27} .
cp %{SOURCE28} .

make
%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64
make -C eppic/libeppic
make -C makedumpfile-1.6.3 LINKTYPE=dynamic USELZO=on USESNAPPY=on
make -C makedumpfile-1.6.3 LDFLAGS="-I../eppic/libeppic -L../eppic/libeppic" eppic_makedumpfile.so
%endif
make -C kdump-anaconda-addon/po

%install
make install DESTDIR=$RPM_BUILD_ROOT
mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig
mkdir -p -m755 $RPM_BUILD_ROOT%{_localstatedir}/crash
mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man8/
mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man5/
mkdir -p -m755 $RPM_BUILD_ROOT%{_docdir}
mkdir -p -m755 $RPM_BUILD_ROOT%{_datadir}/kdump
mkdir -p -m755 $RPM_BUILD_ROOT%{_udevrulesdir}
mkdir -p $RPM_BUILD_ROOT%{_unitdir}
mkdir -p -m755 $RPM_BUILD_ROOT%{_bindir}
mkdir -p -m755 $RPM_BUILD_ROOT%{_libdir}
mkdir -p -m755 $RPM_BUILD_ROOT%{_prefix}/lib/kdump
install -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_bindir}/kdumpctl

SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_target_cpu}
[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_arch}
[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig
install -m 644 $SYSCONFIG $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/kdump

install -m 755 %{SOURCE7} $RPM_BUILD_ROOT/sbin/mkdumprd
install -m 644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/kdump.conf
install -m 644 kexec/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/kexec.8
install -m 644 %{SOURCE12} $RPM_BUILD_ROOT%{_mandir}/man8/mkdumprd.8
install -m 644 %{SOURCE26} $RPM_BUILD_ROOT%{_mandir}/man8/kdumpctl.8
install -m 755 %{SOURCE20} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib.sh
install -m 755 %{SOURCE24} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib-initramfs.sh
%ifnarch s390x
# For s390x the ELF header is created in the kdump kernel and therefore kexec
# udev rules are not required
install -m 644 %{SOURCE14} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules
%endif
install -m 644 %{SOURCE15} $RPM_BUILD_ROOT%{_mandir}/man5/kdump.conf.5
install -m 644 %{SOURCE16} $RPM_BUILD_ROOT%{_unitdir}/kdump.service
install -m 755 -D %{SOURCE22} $RPM_BUILD_ROOT%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64
install -m 755 makedumpfile-1.6.3/makedumpfile $RPM_BUILD_ROOT/sbin/makedumpfile
install -m 644 makedumpfile-1.6.3/makedumpfile.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8/makedumpfile.8.gz
install -m 644 makedumpfile-1.6.3/makedumpfile.conf.5.gz $RPM_BUILD_ROOT/%{_mandir}/man5/makedumpfile.conf.5.gz
install -m 644 makedumpfile-1.6.3/makedumpfile.conf $RPM_BUILD_ROOT/%{_sysconfdir}/makedumpfile.conf.sample
install -m 755 makedumpfile-1.6.3/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdir}/eppic_makedumpfile.so
mkdir -p $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/
install -m 644 makedumpfile-1.6.3/eppic_scripts/* $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/
%endif
make -C kdump-anaconda-addon install DESTDIR=$RPM_BUILD_ROOT
%find_lang kdump-anaconda-addon

%define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g')
%define remove_dracut_early_kdump_prefix() %(echo -n %1|sed 's/.*dracut-early-kdump-//g')

# deal with dracut modules
mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase
cp %{SOURCE100} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}
cp %{SOURCE101} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}
cp %{SOURCE102} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE102}}
cp %{SOURCE103} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE103}}
cp %{SOURCE104} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE104}}
cp %{SOURCE105} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE105}}
cp %{SOURCE106} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE106}}
cp %{SOURCE107} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE107}}
chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}
chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}
mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump
cp %{SOURCE108} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}}
cp %{SOURCE109} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}
chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}}
chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}


%define dracutlibdir %{_prefix}/lib/dracut
#and move the custom dracut modules to the dracut directory
mkdir -p $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/
mv $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/* $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/

%post
# Initial installation
%systemd_post kdump.service

touch /etc/kdump.conf
# This portion of the script is temporary.  Its only here
# to fix up broken boxes that require special settings 
# in /etc/sysconfig/kdump.  It will be removed when 
# These systems are fixed.

if [ -d /proc/bus/mckinley ]
then
	# This is for HP zx1 machines
	# They require machvec=dig on the kernel command line
	sed -e's/\(^KDUMP_COMMANDLINE_APPEND.*\)\("$\)/\1 machvec=dig"/' \
	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new
	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump
elif [ -d /proc/sgi_sn ]
then
	# This is for SGI SN boxes
	# They require the --noio option to kexec 
	# since they don't support legacy io
	sed -e's/\(^KEXEC_ARGS.*\)\("$\)/\1 --noio"/' \
	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new
	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump
fi


%postun
%systemd_postun_with_restart kdump.service

%preun
# Package removal, not upgrade
%systemd_preun kdump.service

%triggerun -- kexec-tools < 2.0.2-3
# Save the current service runlevel info
# User must manually run systemd-sysv-convert --apply kdump
# to migrate them to systemd targets
/usr/bin/systemd-sysv-convert --save kdump >/dev/null 2>&1 ||:

# Run these because the SysV package being removed won't do them
/sbin/chkconfig --del kdump >/dev/null 2>&1 || :
/bin/systemctl try-restart kdump.service >/dev/null 2>&1 || :


%triggerin -- kernel-kdump
touch %{_sysconfdir}/kdump.conf


%triggerpostun -- kernel kernel-xen kernel-debug kernel-PAE kernel-kdump
# List out the initrds here, strip out version nubmers
# and search for corresponding kernel installs, if a kernel
# is not found, remove the corresponding kdump initrd


IMGDIR=/boot
for i in `ls $IMGDIR/initramfs*kdump.img 2>/dev/null`
do
	KDVER=`echo $i | sed -e's/^.*initramfs-//' -e's/kdump.*$//'`
	if [ ! -e $IMGDIR/vmlinuz-$KDVER ]
	then
		# We have found an initrd with no corresponding kernel
		# so we should be able to remove it
		rm -f $i
	fi
done

%files
/sbin/*
%{_bindir}/*
%{_datadir}/kdump
%{_prefix}/lib/kdump
%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64
%{_sysconfdir}/makedumpfile.conf.sample
%endif
%config(noreplace,missingok) %{_sysconfdir}/sysconfig/kdump
%config(noreplace,missingok) %{_sysconfdir}/kdump.conf
%ifnarch s390x
%config %{_udevrulesdir}
%endif
%{dracutlibdir}/modules.d/*
%dir %{_localstatedir}/crash
%{_mandir}/man8/*
%{_mandir}/man5/*
%{_unitdir}/kdump.service
%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh
%doc News
%license COPYING
%doc TODO
%doc kexec-kdump-howto.txt
%doc early-kdump-howto.txt
%doc kdump-in-cluster-environment.txt
%doc live-image-kdump-howto.txt
%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64
%{_libdir}/eppic_makedumpfile.so
/usr/share/makedumpfile/
%endif

%files anaconda-addon -f kdump-anaconda-addon.lang
%{_datadir}/anaconda/addons/com_redhat_kdump
%{_datadir}/icons/hicolor/scalable/apps/kdump.svg
%doc

%changelog
* Wed May 30 2018 Dave Young <dyoung@redhat.com> - 2.0.17-3
- Add early kdump support in initramfs.
- move some common functions from kdumpctl to kdump-lib.sh
- Fix kdumpctl showmem
- kdumpctl: Remove 'netroot' and 'iscsi initiator' entries from kdump
- kdumpctl: add showmem cmd
- Revert "dracut-module-setup.sh: pass correct ip= param for ipv6"

* Sat Apr 28 2018 Dave Young <dyoung@redhat.com> - 2.0.17-2
- pull in makedumpfile 1.6.3 

* Sat Apr 28 2018 Dave Young <dyoung@redhat.com> - 2.0.17-1
- pull in 2.0.17

* Sun Apr 08 2018 Dave Young <dyoung@redhat.com> - 2.0.16-6
- kdump.sysconfig.ppc64(le): remove "root=" param from ppc64(le) 2nd kernel
- kdumpctl: Check the modification time of core_collector
- dracut-module-setup.sh: pass correct ip= param for ipv6

* Fri Feb 09 2018 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 2.0.16-5
- Escape macros in %%changelog

* Wed Feb 7 2018 Dave Young <dyoung@redhat.com> - 2.0.16-4
- update anaconda addon migrate with Anaconda changes.

* Fri Dec 8 2017 Dave Young <dyoung@redhat.com> - 2.0.16-3
- workaround koji build failure (rhbz1520805)

* Mon Dec 4 2017 Dave Young <dyoung@redhat.com> - 2.0.16-2
- dracut-module-setup.sh: check whether to include multipath-hostonly or not
- Revert "kdumpctl: sanity check of nr_cpus for x86_64 in case running out of vectors"
- kdumpctl: skip selinux-relabel for dracut_args --mount dump target

* Tue Nov 21 2017 Dave Young <dyoung@redhat.com> - 2.0.16-1
- update to kexec-tools 2.0.16

* Thu Nov 9 2017 Dave Young <dyoung@redhat.com> - 2.0.15-15
- Use absolute path /usr/bin/dracut in mkdumprd

* Wed Oct 11 2017 Dave Young <dyoung@redhat.com> - 2.0.15-14
- kdumpctl: Error out in case there are white spaces before an option name

* Wed Sep 6 2017 Dave Young <dyoung@redhat.com> - 2.0.15-13
- dracut-module-setup.sh: eliminate redundant kdump_get_mac_addr call
- mkdumprd: use --quiet dracut argument to speedup initramfs build
- mkdumprd: fix patterns to modify mount options
- fadump: rebuild default initrd with dump capture capability
- module-setup: remove software iscsi cmdline generated by dracut
- kdumpctl: remove some cmdline inheritage from 1st kernel
- mkdumprd: apply dracut "--hostonly-cmdline" and "--no-hostonly-default-device"
- Change dump_to_rootfs to use "--mount" instead of "root=X"
- kdumpctl: move is_fadump_capable() to kdump-lib.sh
- Revert "kdumpctl: use generated rd.lvm.lv=X"
- Revert "mkdumprd: omit crypt when there is no crypt kdump target"
- Revert "mkdumprd: omit dracut modules in case of no dm target"
- Revert "mkdumprd: omit dracut modules in case of network dumping"
- update bogus date in rpm spec

* Thu Aug 17 2017 Dave Young <dyoung@redhat.com> - 2.0.15-12
- makedumpfile: fix 4.13 kernel larget vmcore bug
- Revert "Improve 'cpu add' udev rules"

* Tue Aug 15 2017 Dave Young <dyoung@redhat.com> - 2.0.15-11
- Own the /usr/share/makedumpfile dir
- Mark COPYING as %%license

* Tue Aug 8 2017 Dave Young <dyoung@redhat.com> - 2.0.15-10
- Improve 'cpu add' udev rules
- module-setup: suppress the early iscsi error messages
- mkdumprd: use 300s as the default systemd unit timeout for kdump mount 

* Mon Aug 7 2017 Dave Young <dyoung@redhat.com> - 2.0.15-9
- fix makedumpfile bug 1474706 

* Thu Aug 03 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.15-8
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild

* Sun Jul 30 2017 Florian Weimer <fweimer@redhat.com> - 2.0.15-7
- Rebuild with binutils fix for ppc64le (#1475636)

* Fri Jul 28 2017 Dave Young <dyoung@redhat.com> - 2.0.15-6
- update upstream makedumpfile 1.6.2

* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.15-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild

* Wed Jul 19 2017 Dave Young <dyoung@redhat.com> - 2.0.15-4
- mkdumprd: remove useless "x-initrd.mount"
- kdumpctl: use "apicid" other than "initial apicid"

* Fri Jul 14 2017 Dave Young <dyoung@redhat.com> - 2.0.15-3
- module-setup: fix 99kdumpbase network dependency
- mkdumprd: omit dracut modules in case of network dumping
- mkdumprd: omit dracut modules in case of no dm target
- mkdumprd: omit crypt when there is no crypt kdump target
- kdumpctl: use generated rd.lvm.lv=X
- mkdumprd: change for_each_block_target() to use get_kdump_targets()
- kdump-lib.sh: introduce get_kdump_targets()
- kdump-lib.sh: fix improper get_block_dump_target()
- kdumpctl: fix infinite loop caused by running under bash

* Wed Jun 28 2017 Dave Young <dyoung@redhat.com> - 2.0.15-2
- enable makedumpfile for arm64

* Fri Jun 23 2017 Dave Young <dyoung@redhat.com> - 2.0.15-1
- rebase kexec-tools-2.0.15

* Thu Jun 15 2017 Dave Young <dyoung@redhat.com> - 2.0.14-13
- kexec-tools.spec: Fix whitespace errors
- dracut-module-setup: Fix test for inclusion of DRM modules
- kdump.conf.5: clarify the fence_kdump_nodes option

* Thu May 18 2017 Dave Young <dyoung@redhat.com> - 2.0.14-12
- kdumpctl: for fence_kdump, the ipaddr of this node should be excluded

* Fri May 12 2017 Dave Young <dyoung@redhat.com> - 2.0.14-11
- kdumpctl: change the shebang header to use /bin/bash
- kdumpctl: call strip_comments only when necessary to speedup
- Revert "kdumpctl: improve "while read" time for /etc/kdump.conf" (rhbz1449801)

* Fri May 5 2017 Dave Young <dyoung@redhat.com> - 2.0.14-10
- kdumpctl: improve "while read" time for /etc/kdump.conf
- kdumpctl: update check_dump_fs_modified() to use "lsinitrd -f"
- kdumpctl: improve check_wdt_modified()
- kdumpctl: remove is_mode_switched()
- kdumpctl: bail out earlier in case of no reserved memory

* Thu Apr 27 2017 Dave Young <dyoung@redhat.com> - 2.0.14-9
- kdump: Introduce 'force_no_rebuild' option
- kdump-lib-initramfs.sh: ignore the failure of echo
- kdump.sysconfig/x86_64: Add nokaslr to kdump kernel cmdline

* Tue Apr 11 2017 Dave Young <dyoung@redhat.com> - 2.0.14-8
- kdumpctl: fix status check when CONFIG_CRASH_DUMP is not enabled in kernel
- kdumpctl: fix a bug in remove_cmdline_param()
- kdumpctl: remove "root=X" for kdump boot
- Revert "kdumpctl: filter 'root' kernel parameter when running in live images"

* Fri Mar 31 2017 Dave Young <dyoung@redhat.com> - 2.0.14-7
- kdump-emergency: fix "Transaction is destructive" emergency failure
- mkdumprd: reduce lvm2 memory under kdump

* Fri Mar 17 2017 Dave Young <dyoung@redhat.com> - 2.0.14-6
- Fix kernel kaslr caused regressions (kexec -p and makedumpfile --mem-usage)

* Thu Mar 9 2017 Dave Young <dyoung@redhat.com> - 2.0.14-5
- kdump-lib.sh: fix incorrect usage with pipe as input for grep -q in is_pcs_fence_kdump()
- Document: fix incorrect link in fadump-how.txt

* Mon Jan 23 2017 Dave Young <dyoung@redhat.com> - 2.0.14-4
- drop kdump script rhcrashkernel-param in kexec-tools repo
- kdumpctl: sanity check of nr_cpus for x86_64 in case running out of vectors
- kdumpctl: change prepare_cmdline() to operate KDUMP_COMMANDLINE directly
- use --hostonly-i18n for dracut

* Wed Jan 4 2017 Dave Young <dyoung@redhat.com> - 2.0.14-3
- Rebase makedumpfile 1.6.1
- Delete unused patches

* Tue Dec 20 2016 Dave Young <dyoung@redhat.com> - 2.0.14-2
- rebase upstream kexec-tools 2.0.14
- update kdump anaconda addon
- cleanup sources file

* Mon Nov 28 2016 Dave Young <dyoung@redhat.com> - 2.0.14-1
- kexec-tools 2.0.14-1

* Mon Nov 28 2016 Dave Young <dyoung@redhat.com> - 2.0.13-9
- rename function kdump_to_udev_name
- Raw dump: use by-id as persistent policy in 2nd kernel
- drop dracut duplicate functions
- dracut-kdump: use POSIX shell syntax
- Correct two typos in kdumpctl and kdump.conf

* Fri Nov 11 2016 Dave Young <dyoung@redhat.com> - 2.0.13-8
- kexec/arch/i386: Add support for KASLR memory randomization
- Update kdump anaconda addon
- fadump: restore default initrd when fadump mode is disabled
- kdump/fadump: fix network interface name when switching from fadump to kdump
- kdumpctl: filter 'root' kernel parameter when running in live images
- Documentation: step by step guide on confiuring kdump in live images

* Thu Oct 27 2016 Dave Young <dyoung@redhat.com> - 2.0.13-7
- fix wrong page_offset added in 2.0.13-6

* Wed Oct 26 2016 Dave Young <dyoung@redhat.com> - 2.0.13-6
- add kexec support for arm64
- support x86 kaslr which is enabled by default in F25 kernel

* Fri Sep 16 2016 Dave Young <dyoung@redhat.com> - 2.0.13-5
- Fix bug 1373958 for system boot without initrd
- Do not depend on /etc/fstab in kdumpctl in case it does not exist

* Fri Aug 26 2016 Dave Young <dyoung@redhat.com> - 2.0.13-4
- Add special dump target "--mount" in dracut_args

* Tue Aug 9 2016 Dave Young <dyoung@redhat.com> - 2.0.13-3
- Fix armv7 build failure

* Tue Aug 9 2016 Dave Young <dyoung@redhat.com> - 2.0.13-2
- Drop old patches for 2.0.12

* Tue Aug 9 2016 Dave Young <dyoung@redhat.com> - 2.0.13-1
- Rebase kexec-tools 2.0.13

* Thu Jul 21 2016 Dave Young <dyoung@redhat.com> - 2.0.12-10
- kdump.conf manpage and kdump.conf comments fixes.
- kdump watchdog support.

* Wed Jul 13 2016 Dave Young <dyoung@redhat.com> - 2.0.12-9
- Update kdump anaconda addon
- makedumpfile: Support _count -> _refcount rename in struct page
- module-setup: Don't handle iBFT in kdump

* Wed Jul 6 2016 Dave Young <dyoung@redhat.com> - 2.0.12-8
- Rebase makedumpfile 1.6.0

* Mon Jun 27 2016 Dave Young <dyoung@redhat.com> - 2.0.12-7
- Fix date format in spec file.

* Mon Jun 27 2016 Dave Young <dyoung@redhat.com> - 2.0.12-6
- get_persistent_dev(): fix name contention with dracut's similar function

* Mon Jun 6 2016 Dave Young <dyoung@redhat.com> - 2.0.12-5
- kdump-lib: Add get_ifcfg_filename() to get the proper ifcfg file
- module-setup: Use get_ifcfg_filename() to get the proper ifcfg file

* Mon May 30 2016 Dave Young <dyoung@redhat.com> - 2.0.12-4
- update kdump anaconda addon to add mem range in tui 
- .gitignore: Update to make it more generic
- kdumpctl: check_rebuild improvement 
- kdumpctl: Do not rebuild initramfs when $KDUMP_BOOTDIR is read only

* Tue Mar 29 2016 Dave Young <dyoung@redhat.com> - 2.0.12-3
- update kdump anaconda addon to adapt to blivet-2.0 API

* Thu Mar 24 2016 Dave Young <dyoung@redhat.com> - 2.0.12-2
- Release 2.0.12-2
- ppc64le: fix kexec hang due to ppc64 elf abi breakage

* Tue Mar 22 2016 Dave Young <dyoung@redhat.com> - 2.0.12-1
- Rebase kexec-tools to 2.0.12 

* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.11-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild

* Fri Dec 11 2015 Dave Young <dyoung@redhat.com> - 2.0.11-3
- use "systemctl reboot -f" for reboot action
- Remove kernel param "quiet" from kdump kernel cmdline
- kdump.sysconfig: add KDUMP_COMMANDLINE_REMOVE
- Add missing prefixes in default sysconfig file
- fix bogus date in changelog

* Thu Nov 19 2015 Dave Young <dyoung@redhat.com> - 2.0.11-2
- Rebase to upstream makedumpfile 1.5.9 

* Mon Nov 9 2015 Dave Young <dyoung@redhat.com> - 2.0.11-1
- Rebase to upstream kexec-tools 2.0.11

* Mon Oct 19 2015 Dave Young <dyoung@redhat.com> - 2.0.10-9
- kexec-kdump-howto:Add introduction of parallel dumping
- Remove duplicate prefix path ${initdir}

* Tue Sep 8 2015 Dave Young <dyoung@redhat.com> - 2.0.10-8
- update kdump addon to fix a kickstart installationi issue 

* Wed Aug 19 2015 Dave Young <dyoung@redhat.com> - 2.0.10-7
- add man page for kdumpctl

* Thu Aug 13 2015 Baoquan He <bhe@redhat.com> - 2.0.10-6
- mkdumprd: Remove ifcfg from dracut's modules
- module-setup: Choose the first matched gateway in kdump_static_ip
- module-setup: Add permanent option to detect static ip address or not

* Tue Aug 4 2015 Dave Young <dyoung@redhat.com> - 2.0.10-5
- Update kdump addon to fix an installation hang issue.

* Tue Jul 28 2015 Dave Young <dyoung@redhat.com> - 2.0.10-4
- ipv6 support (except for link scope addresses)
- Apply the manual DNS to the 2nd kernel
- load iTCO_wdt early in cmdline hook

* Thu Jul 23 2015 Dave Young <dyoung@redhat.com> - 2.0.10-3
- Update kdump addon icon
- Revert static route corner case patches per bhe. He discussed with Marc
  it is just a corner case.

* Mon Jul 13 2015 Dave Young <dyoung@redhat.com> - 2.0.10-2
- update kdump addon icon

* Thu Jul 9 2015 Dave Young <dyoung@redhat.com> - 2.0.10-1
- Rebase kexec-tools 2.0.10
- Rebase eppic git tree 050615
- Enhance kdump.conf "default" parameters check

* Thu Jul 2 2015 Dave Young <dyoung@redhat.com> - 2.0.9-2
- Resolve bug 1236456, kexec load fail because koji add extra gcc flags.
- Remove -FPIC for makedumpfile since it is not necessary without harden build

* Tue Jun 23 2015 Dave Young <dyoung@redhat.com> - 2.0.9-1
- Rebase kexec-tools 2.0.9
- Rebase makedumpfile 1.5.8
- revert 6347630 since ipv6 patches has not been reviewed.

* Wed Jun 17 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.8-13
- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild

* Thu Jun 11 2015 Dave Young <dyoung@redhat.com> -2.0.8-13
- Update kdump anaconda addon icon again.

* Wed Jun 10 2015 Dave Young <dyoung@redhat.com> -2.0.8-12
- Update kdump anaconda addon, change an icon.

* Wed Jun 03 2015 Baoquan He <bhe@redhat.com> -2.0.8-11
- make kdump work when kernel crash after shutdown
- Disable transparent hugepages in second kernel
- Filtered out "noauto" options in 2nd kernel fstab

* Tue Apr 21 2015 Baoquan He <bhe@redhat.com> -2.0.8-10
- add fPIC to makefumpfile CFLAGS to support hardening
- dracut-module-setup: Enhance kdump to support the bind mounted feature in Atomic
- Fix the warning if the target path is bind mount in Atomic
- Get the mount point correctly, if the device has several mount point
- kdump-lib: Add new function to judge the system is Atomic or not
- kdump-lib: Add the new function to enhance bind mounted judgement
- Remove duplicate slash in save path

* Thu Apr 09 2015 Baoquan He <bhe@redhat.com> -2.0.8-9
- Revert "execute kdump_post after do_default_action"
- dracut-module-setup.sh: change the insecure use of /tmp/*$$* filenames
- make kdump saving directory name consistent with RHEL6

* Sun Feb 15 2015 Dave Young <dyoung@redhat.com> - 2.0.8-8
- execute kdump_post after do_default_action
- update kdump anaconda addon (translations/help text issus)

* Fri Jan 30 2015 Baoquan He <bhe@redhat.com> - 2.0.8-7
- kdumpctl: adjust the boot dir if kernel is put in sub dir of /boot

* Tue Jan 13 2015 WANG Chao <chaowang@redhat.com> - 2.0.8-6
- mount fail if its mount point doesn't exist in /sysroot
- rebuild initrd dependency during kdump restart
- fix a dump path issue

* Tue Jan 06 2015 WANG Chao <chaowang@redhat.com> - 2.0.8-5
- remove panic_on_warn kernel param in 2nd kernel
- remove sysctl.conf to restore sysctl default values in 2nd kernel
- fix a core_collector issue in ssh and raw dump case
- update to kdump-anaconda-addon-005-2-g86366ae.tar.gz
- some cleanups

* Tue Nov 04 2014 WANG Chao <chaowang@redhat.com> - 2.0.8-4
- Fix ppc64le installation issue
- Fix get_option_value function

* Tue Oct 28 2014 WANG Chao <chaowang@redhat.com> - 2.0.8-3
- fix static route corner case
- fadump fix

* Tue Oct 21 2014 WANG Chao <chaowang@redhat.com> - 2.0.8-2
- Fix build issue on ARM

* Mon Oct 20 2014 WANG Chao <chaowang@redhat.com> - 2.0.8-1
- Rebase kexec-tools-2.0.8
- Remove subpackage kexec-tools-eppic
- Rebase kdump-anaconda-addon-005

* Fri Sep 26 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-11
- Fix build failure on ppc64le
- Fix an issue on iscsi boot environment

* Tue Sep 23 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-10
- Enable ppc64le arch.
- Rebase makedumpfile-1.5.7
- add sample eppic scripts to kexec-tools-eppic package
- Restart kdump service on cpu ADD/REMOVE events

* Wed Sep 10 2014 Baoquan He <bhe@redhat.com> - 2.0.7-9
- kdumpctl: Use kexec file based syscall for secureboot enabled machines
- kdumpctl: Use kexec file based mode to unload kdump kernel
- kdumpctl: Do not redirect error messages to /dev/null
- kexec: Provide an option to use new kexec system call

* Fri Aug 29 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-8
- use absolute path for executable in systemd service
- update to kdump-anaconda-addon-003
- remove dead kdump firstboot module and po files

* Thu Aug 21 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-7
- install 98-kexec.rules to /usr/lib/
- update kdump-anaconda-addon-0.2

* Sat Aug 16 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.7-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild

* Wed Aug 06 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-5
- rework of kdump error handling
- add fadump support
- add static route support
- systemd will take care of shutdown and umount filesystems

* Thu Jul 24 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-4
- update to kdump-anaconda-addon-001-4-g03898ef.tar.gz
- prefix "kdump-" to eth name

* Mon Jul 21 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-3
- update to kdump-anaconda-addon-20140721.tar.gz

* Wed Jul 16 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-2
- Fix makedumpfile OOM issue

* Tue Jun 10 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-1
- Rebase kexec-tools-2.0.7

* Sun Jun 08 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.6-9
- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild

* Thu May 22 2014 WANG Chao <chaowang@redhat.com> - 2.0.6-8
- re-construct anaconda-addon file hierarchy

* Wed May 21 2014 WANG Chao <chaowang@redhat.com> - 2.0.6-7
- fix a typo in kexec-tools.spec

* Tue May 20 2014 WANG Chao <chaowang@redhat.com> - 2.0.6-6
- New package kdump-anaconda-addon
- fixes for udev event based service restart

* Wed Apr 30 2014 WANG Chao <chaowang@redhat.com> - 2.0.6-5
- Remove nofail mount option
- Rebase makedumpfile-1.5.6

* Thu Apr 17 2014 WANG Chao <chaowang@redhat.com> - 2.0.6-4
- generate kdump service dependencies on the fly
- kdump.conf: a standalone path directive becomes a relative path to it's backed disk.

* Wed Apr 02 2014 WANG Chao <chaowang@redhat.com> - 2.0.6-3
- Add README to git repo
- Add fence_kdump support for generic clusters

* Thu Mar 27 2014 Peter Robinson <pbrobinson@fedoraproject.org> 2.0.6-2
- Exclude AArch64

* Wed Mar 26 2014 WANG Chao <chaowang@redhat.com> - 2.0.6-1
- Rebase kexec-tools-2.0.6
- fix an issue when dump path is mounted on nfs
- vmcore-dmesg: stack smashing fix
- get_ssh_size fix for localized df output

* Mon Mar 10 2014 WANG Chao <chaowang@redhat.com> - 2.0.5-2
- Warn about save vmcore patch mounted by another disk
- Omit dracut resume module

* Tue Mar 04 2014 WANG Chao <chaowang@redhat.com> - 2.0.5-1
- Rebase kexec-tools-2.0.5
- backport several patches from upstream for i386 build

* Mon Mar 03 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-25
- Pass disable_cpu_apicid to kexec of capture kernel
- Relax restriction of dumping on encrypted target
- regression fix on wdt kernel drivers instal

* Mon Feb 17 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-24
- add kdump-in-cluster-environment.txt to rpm pkg
- Secure Boot status check warning
- Some watchdog driver support

* Wed Jan 29 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-23
- ssh dump: create random-seed manually
- makedumpfile: memset() in cyclic bitmap initialization introduce segment fault.
- Add acpi_no_memhotplug to kdump kernel
- Add fence kdump support

* Tue Jan 28 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-22
- Rebase makedumpfile-1.5.5

* Wed Jan 22 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-21
- makedumpfile: Improve progress information for huge memory system
- s390: use nr_cpus=1 instead of maxcpus=1

* Fri Jan 17 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-20
- vmcore-dmesg: fix timestamp error in vmcore-dmesg.txt
- makedumpfile: re-enable mmap() and introduce --non-mmap
- kdump.conf uncomment default core_collector line
- fix an issue when 'ssh' directive appearing in kdump.conf, the rest part of
  lines in this file are ignored

* Tue Dec 24 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-18
- update translation files
- makedumpfile: default to lzo compression
- makedumpfile: add makedumpfile.conf.sample and its manpage

* Sat Dec 21 2013 Ville Skyttä <ville.skytta@iki.fi> - 2.0.4-15
- Fix Tamil (India) locale subdir name.
- Fix bogus date in %%changelog.

* Tue Dec 03 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-14
- Add rd.memdebug in kdump module
- kdumpctl: Avoid leaking fd to subshell
- makedumpfile: Understand >= v3.11-rc4 dmesg
- makedumpfile, ppc: Support to filter dump for kernels that use CONFIG_SPARSEMEM_VMEMMAP.

* Fri Nov 15 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-13
- makedumpfile: disable mmap()

* Tue Oct 29 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-12
- fix sadump format phys_base calculating error
- kdump, x86: Process multiple Crash kernel in /proc/iomem
- makedumpfile: wrong cyclic buffer size recalculation causes bitmap data corruption
- Fix max_mapnr issue on system has over 44-bit addressing.

* Sat Oct 12 2013 Baoquan He <bhe@redhat.com> -2.0.4-11
- kdump-lib.sh: strip_comments is not implemented correcty

* Fri Sep 27 2013 Baoquan He <bhe@redhat.com> - 2.0.4-10
- Back port 2 revert commits
- kdump.sysconfig: default to "nofail" mount

* Fri Sep 27 2013 Baoquan He <bhe@redhat.com> - 2.0.4-9
- Strip inline comments from the kdump config file before use
- kdump-lib.sh: add common function strip_comments
- Introduce kdump-lib.sh for kdump shared functions
- kdump.service: Start kdump after network is online and remote fs is mounted
- dracut-module-setup: _dev to be a local variable
- kdumpctl: Run multiple kdumpctl instances one by one in serial order

* Wed Aug 21 2013 Baoquan He <bhe@redhat.com> - 2.0.4-8
- remove 98selinux dependency

* Fri Aug 2  2013 Baoquan He <bhe@redhat.com> - 2.0.4-7
- dracut-kdump.sh: add do_dump() and error out if dump vmcore fails
- dracut-module-setup.sh: setup correct system time and time zone in 2nd kernel.
- kernel cmdline: Remove hugepage allocations
- Use /lib/dracut/no-emergency-shell to control action on fail
- Revert: kdump.sysconfig: Add option action_on_fail and set its default as continue
- dracut-kdump.sh: Redirect kdump script stdout/stderr to /dev/console
- makedumpfile: Add vmap_area_list definition for ppc/ppc64.

* Fri Jul 12 2013 Baoquan He <bhe@redhat.com> - 2.0.4-6
- add snappy build
- add lzo build
- pull makedumpfile-1.5.4
- mkdumprd: check return value of subshell
- mkdumprd: get_persistent_dev() return original dev if no persistent dev exists.
- dracut-kdump.sh: Merge dump_to_rootfs() to dump_fs()
- dracut-kdump.sh: explicitly sync after each dump
- Correct wrong weekday of changelog
- kexec-tools.spec: Remove incorrect description in changelog

* Tue Jun 25 2013 Baoquan He <bhe@redhat.com> - 2.0.4-5
- monitor-dd-progress fix
- rawdump: only show dd progress bar when core_collector is not makedumpfile
- kexec-tools.spec: replaces scriptlets with new systemd macros
- dracut-kdump.sh: umount fs right before kdump exit
- dracut-kdump.sh: recursively umount fs and its submounts
- dracut-kdump.sh: cleanup - using local variable names instead of $1/$2 in functions
- dracut-kdump.sh: name the invalid vmcore to vmcore-incomplete
- dracut-kdump.sh: Output top level information about the kdump progress.
- kexec-kdump-howto: Add a section for debugging tips

* Tue Jun 18 2013 Baoquan He <bhe@redhat.com> - 2.0.4-4
- dracut-module-setup.sh: improve the approach to get a bridged interface list
- dracut-module-setup.sh: cleanup - use kdump_get_mac_addr() function
- dracut-module-setup.sh: use kernel exported mac address in kdump_get_mac_addr()
- dracut-module-setup.sh: use perm addr of slaves to setup bonding network
- kdump: Do not output debug messages by default
- dracut-module-setup.sh: kdump module depends on drm module
- mkdumprd: return error if no write permission on save path of server for ssh

* Thu Jun 13 2013 Baoquan He <bhe@redhat.com> - 2.0.4-3
- mkdumprd: remove -M option for dracut
- kdumpctl: add selinux relabel when service startup
- depends on dracut selinux module
- dracut-kdump.sh: umount rootfs after dump_to_rootfs
- kdump.sysconfig: append "panic=10" to kdump cmdline
- kexec-kdump-howto: grubby is suggested modifing kernel cmdline
- kexec-tools.spec: removes kexec udev rules for s390
- kdump.sysconfig: Add option action_on_fail and set its default as continue
- Add tab key as delimiter for core_collector in kdump.conf
- redirect stdout to stderr

* Tue May 14 2013 Baoquan He <bhe@redhat.com> - 2.0.4-2
- kdump: Save vmcore-dmesg.txt before saving vmcore
- Remove "ip=" overwrite to 40ip.conf
- Add support for bridge over bond/team/vlan.
- Fix bonding options syntax and get all specified options from ifcfg file.
- add dracut_args option to kdump.conf
- kexec-tools.spec: Add ethtool to dependency.
- error out if dump target is encrypted

* Wed Apr  3 2013 Baoquan He <bhe@redhat.com> - 2.0.4-1
- Delete several patches which have been merged into kexec-tools-2.0.4
- Revert: Release 2.0.3-72
- Release 2.0.3-72
- Pull kexec-tools-2.0.4
- Check if block device as dump target is resettable
- mkdumprd: add function perror_exit
- Deprecate blacklist option

* Wed Mar 27 2013 Baoquan He <bhe@redhat.com> - 2.0.3-71
- Remove eppic support on ppc and s390 arch

* Mon Mar 18 2013 Baoquan He <bhe@redhat.com> - 2.0.3-70
- Change rules related to eppic in kexec-tools.spec

* Thu Mar 14 2013 Baoquan He <bhe@redhat.com> - 2.0.3-69
- Support for eppic language as a subpackage
 
* Thu Mar 14 2013 Baoquan He <bhe@redhat.com> - 2.0.3-68
- tune sysconfig to save memory usage
- Remove useless codes related to LOGGER in kdumpctl
- kdumpctl:print out the service status
- Return to start() function when check_ssh_target failed
- use findmnt instead of blkid in mkdumprd
- check dump target mounting earlier
- kdumpctl: rename function name check_config
- add function to check kdump config file
- dracut-module-setup.sh: remove UUID/LABEL quotes before using it
- Change dump_to_rootfs to be a default option and reboot to be default action
- Remove "-F" in CORE_COLLECTOR when dump_to_rootfs

* Tue Feb 19 2013 Baoquan He <bhe@redhat.com> - 2.0.3-67
- Remove comma which is redundant
- Modify codes related to dump dir to make it clearer
- Rectify the get_host_ip implementation
- Revert: Merge an upstream patch for fix a ppc64 makedumpfile bug with with CONFIG_SPARSEMEM_EXTREME
- pull makedumpfile 1.5.3

* Tue Feb 5 2013 Dave Young <ruyang@redhat.com> - 2.0.3-66
- Spec: remove kdump image when a corresponding kernel is removed
- Merge an upstream patch for fix a ppc64 makedumpfile bug

* Mon Jan 28 2013 Dave Young <ruyang@redhat.com> - 2.0.3-65
- Add support for team devices
- Update translation file po/it.po
- remove wait for net ok function
- add bootdev cmdline param
- kdumpnic cmdline file name cleanup

* Fri Jan 4 2013 Dave Young <ruyang@redhat.com> - 2.0.3-64
- fix issue of exec on stack for ppc32

* Fri Dec 21 2012 Dave Young <ruyang@redhat.com> - 2.0.3-63
- revert explictly handling of PIPESTATUS
- enable pipefail bash option
- wrong ssh key fix
- build fix: Update 3 po files: po/gu.po po/or.po po/zh_CN.po

* Fri Dec 21 2012 Dave Young <ruyang@redhat.com> - 2.0.3-62
- Pull translated po files from zanata
- Optimize redundent code fetching server of network dump
- change the dump dir format to be more readable

* Wed Dec 12 2012 Dave Young <ruyang@redhat.com> - 2.0.3-61
- firstboot:fix reserve mem ui spinbox step size
- handle readonly mounted filesystem

* Mon Dec 10 2012 Dave Young <ruyang@redhat.com> - 2.0.3-60
- makedumpfile 1.5.1
- Update po tar.gz
- Add a notes for zanata process
- Add two xmls file for po zanata translation
- Cleanup and recreate po files

* Fri Nov 16 2012 Dave Young <ruyang@redhat.com> - 2.0.3-59
- Enable kdump service after installation
- get MEM_RESERVED from sysfs attribute
- get_ssh_size: use -n to redirect stdin from /dev/null
- add random feeding code for ssh dump
- kdump option space checking improvement
- kdumpctl: multi dump target checking fix

* Thu Oct 25 2012 Dave Young <ruyang@redhat.com> - 2.0.3-58
- pull in two upstream patches

* Thu Oct 11 2012 Dave Young <ruyang@redhat.com> - 2.0.3-57
- improve persistent name handling

* Sat Sep 29 2012 Dave Young <ruyang@redhat.com> - 2.0.3-56
- Pull vmcore-dmesg patches from vivek
- ppc/ppc64: compile purgatory with gcc option msoft-float
- Update to support f18 grub2 efi config file
- pass persistent name to dracut --device
- pass persistent name to dracut --mount
- use persistent name in kdump.conf of initramfs
- mkdumprd: add function get_persistent_dev
- remove useless uuid and label handling

* Thu Sep 06 2012 Dave Young <ruyang@redhat.com> - 2.0.3-55
- doc fix for mount dump target before mkdumprd
- pull makedumpfile 1.5.0

* Wed Aug 29 2012 Dave Young <ruyang@redhat.com> - 2.0.3-54
- pass raw device as dracut argument
- iscsi setup fix
- firstboot: add automatic and manual memory reservation for rhel
- firstboot: remove unnecessary underline shortkey
- firstboot: fix gtk warning about non-zero page size
- firstboot: update all kernels config in grubbyCmd
- firstboot: add actual reserved memory widget
- firstboot code cleanup
- rhcrashkernel-param: echo crashkernel=auto for rhel7
- Remove the kernel-kdump handling
- s390x firstboot fix
- remove elilo support
- grub2 fix in firstboot
- Take closing the reboot dialog as no
- Handle new crashkernel= syntax in firstboot
- Fix a localized string in firstboot
- Configure kdump in firstboot
- fix firstboot to ensure kdump svc is disabled properly
- firstboot text domain fix
- Update to use systemctl instead of sysv chkconfig
- port force_rebuild kdump.conf option
- Change return value to indicate the result of dump_raw() correctly.
- call dracut function for default shell

* Mon Jul 23 2012 Dave Young <ruyang@redhat.com> - 2.0.3-53
- refactor net option
- use fstab-sys to mount nfs
- rename function dump_localfs
- dump_localfs error path fix
- update kexec-kdump-howto.txt about systemctl commands
- ssh propagate alert message fix
- remove useless dracut cmdline '-c /dev/null'
- remove useless dracut cmdline for kernel-modules and kdumpbase
- install core_collector in module-setup.sh
- install extra_bins in module-setup.sh
- remove busybox dependency
- improve warning message of space checking
- do not mount root twice
- do not add fstab-sys module in dracut cmdline
- omit dash module
- network dns config fix
- shell exit value fix 

* Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.3-52
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild

* Thu Jul 5 2012 Dave Young <ruyang@redhat.com> - 2.0.3-51
- add s390x netdev setup
- Add s390x support
- Cleanup temp file leaved at /tmp/
- add check_size function for fs dump
- add ssh check_size
- blacklist patch apply fix
- Respect bonding mode
- Support dump over vlan tagged bonding

* Fri Jun 22 2012 Dave Young <ruyang@redhat.com> - 2.0.3-50
- add blacklist option, Resolves: bz805774
- Add kdump_post and kdump_pre support, Resolves: bz805773
- Port check_config from rhel6, Resolves: bz805778
- raw core_collector fix
- ssh core_collector fix
- drcut-kdump.sh: cleanup kdump.conf check

* Tue Jun 12 2012 Dave Young <ruyang@redhat.com> - 2.0.3-49
- cleanup DUMP_INSTRUCTION handling
- final reboot behavior fix
- dump_rootfs for default target fix
- add vlan support
- fix and refactor bond handling code
- fix and refactor bridge handling code
- core_collector doc basic fix
- omit plymouth module, Resolves: bz821997
- mkdumprd manpage cleanup manpage
- mkdumprd: remove --debug
- mkdumprd: remove noconf
- makedumprd: remove -d
- kdump.conf add sshkey
- kdump.conf remove disk_timeout
- kdump.conf make path uncommented
- kdump.conf.5 add default poweroff
- kdump.conf default shell fix
- kdump.conf default default action fix
- kdump.conf.5 remove module option
- kdump.conf remove kdump_pre/kdump_post
- kdump.conf: remove link_delay

* Mon May 28 2012 Dave Young <ruyang@redhat.com> - 2.0.3-48
- do_default_action cleanup, Resolves: bz805773
- add rhcrashkernel-param for anaconda use, Resolves: bz707441
- Basic iscsi target dump support (software initiator), Resolves bz822701
- Static ip configuratio support, Resolves: bz822739
- udev rules fix, Resolves: bz808817

* Thu May 3 2012 Dave Young <ruyang@redhat.com> - 2.0.3-47
- remove dracut-files.tgz2

* Wed May 2 2012 Dave Young <ruyang@redhat.com> - 2.0.3-46
- mkdumprd: Start using --hostonly and --add kdumpbase while calling dracut
- get_mp function cleanup
- move kdump script order to the end of pre pivot
- port raw dump from rhel6
- remove multi dump

* Mon Apr 23 2012 Dave Young <ruyang@redhat.com> - 2.0.3-45
- update dracut-files.tbz2

* Thu Apr 19 2012 Dave Young <dyoung@redhat.com> - 2.0.3-44
- update ppc64 sysconfig, resolve bug 811449
- deal with nic rename issue, resolve bug 810107
- update x86_64 sysconfig, resolve bug 813711

* Wed Apr 11 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.3-43
- variable name fix from Dave Young.

* Fri Mar 30 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.3-42
- get ip addr with getent
- spec: depends on dracut-network
- Handle net option for nfs in kdump.conf correctly

* Mon Feb 27 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.3-41
- Bump this version.

* Wed Feb 22 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-40
- Fixup sysytemd service file.

* Wed Feb 22 2012 Dave Young <ruyang@redhat.com> - 2.0.2-39
- Add ssh dump support, resolve bug 789253.

* Fri Jan 27 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-38
- Pull the latest makedumpfile release, 1.4.2.

* Fri Jan 27 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-37
- Add initial NFS dump support, experimental.

* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-36
- Really upload the dracut module.

* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-35
- Fix various bugs for nfs dump.

* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-34
- kdump.sh cleanup for fstab handling, from Dave Young.

* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-33
- Handle rootfs correctly.

* Tue Jan 10 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-32
- Fix add_dracut_arg in mkdumprd.

* Tue Jan 10 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-31
- Update kdump dracut module with the latest dracut kdump branch.

* Fri Dec 16 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-30
- Update kdump dracut module to use the latest dracut feature.

* Fri Sep 9 2011 Tom Callaway <spot@fedoraproject.org> - 2.0.2-29
- fix systemd scriptlets

* Wed Sep 7 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-28
- Rename mkdumprd2 to mkdumpramfs.

* Wed Aug 31 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-27
- Add debug_mem_level debugging option, from Jan Stancek.
  Resolve Bug 731395.

* Mon Aug 15 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-26
- Fix several issues caused by the previous revert.

* Mon Aug 15 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-25
- Switch back to old mkdumprd and also keep the new one.

* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-24
- Fix default action handling.

* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-23
- Install modified kdump.conf in initrd.

* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-22
- Handle lvm in pre-pivot hook.

* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-21
- Fix udev rules in module-setup.sh

* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-20
- Generate udev rules in module-setup.sh

* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-19
- Generate udev rules to handle device names.

* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-18
- Fix dump to local filesystem and raw dump.

* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-17
- Depend on dracut-network.

* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-16
- Move dracut module detection code to module-setup.sh.

* Thu Jul 28 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-15
- Use shutdown module of dracut to handle reboot/shutdown/halt.

* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-14
- Wait for loginit.

* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-13
- Use absolute path of reboot/halt/poweroff.

* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-12
- Don't use consolehelper, use real reboot/halt/poweroff.

* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-11
- Rename initrd to initramfs.

* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-10
- Don't depend on busybox, as it doesn't save much space.

* Tue Jul 26 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-9
- Parse default action.

* Mon Jul 25 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-8
- Move path/core_collector/default parsing code to initrd.

* Mon Jul 25 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-7
- Remove obsolete code in kdumpctl.

* Mon Jul 25 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-6
- Support core_collector and extran_bins.

* Thu Jul 21 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-5
- Bypass '-d' option.

* Thu Jul 21 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-4
- Update initramfs infrastructure to make it working
  with dracut.

* Wed Jul 06 2011 Neil Horman <nhorman@redhat.com> - 2.0.2-3
- Removed sysv init script from package

* Mon Jul 04 2011 Neil Horman <nhorman@redhat.com> - 2.0.2-2
- Added systemd unit file (bz 716994)

* Fri Jun 24 2011 Neil Horman <nhorman@redhat.com> - 2.0.2-1
- Updated to upstream version 2.0.2

* Thu Jun 02 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-47
- Fixed misuse of readlink command after directory change (bz 710744)

* Tue Apr 26 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-46
- Fix some grammer in man page (bz 673817)

* Mon Mar 28 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-45
- Fix misuse of basename in mkdumprd (bz 683769)

* Thu Mar 10 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-44
- Fix build break in purgatory makefile

* Thu Mar 10 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-43
- Remove vestigual emitdms code and call from mkdumprd

* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.0-42
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild

* Fri Oct 22 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-41
- Fixed dhcp retry mechanism (bz 645734)

* Wed Sep 29 2010 jkeating - 2.0.0-40
- Rebuilt for gcc bug 634757

* Wed Sep 22 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-39
- fix finding modalias/mkdumprd hang (bz 635893)

* Wed Aug 11 2010 David Malcolm <dmalcolm@redhat.com> - 2.0.0-38
- recompiling .py files against Python 2.7 (rhbz#623327)

* Sun Jun 13 2010 Lubomir Rintel <lkundrak@v3.sk> - 2.0.0-37
- Fix a syntax error in kdump init script

* Sun Jun 13 2010 Lubomir Rintel <lkundrak@v3.sk> - 2.0.0-36
- Cosmetic mkdumprd fixes (drop an unused function, streamline another)

* Sat May 29 2010 CAI Qian <caiqian@redhat.com> - 2.0.0-35
- Forward-port from F13
- Fixed kernel text area search in kcore (bz 587750)

* Sat May 29 2010 CAI Qian <caiqian@redhat.com> - 2.0.0-34
- Massive forward-port from RHEL6
- Update kexec-kdump-howto.txt
- Update docs to reflect use of ext4
- Update mkdumprd to pull in all modules needed
- Fix mkdumprd typo
- Removed universal add of ata_piix from mkdumprd
- Fix infinite loop from modprobe changes
- Fixed kexec-kdump-howto.doc for RHEL6
- Update makedumpfile to 1.3.5
- Improved mkdumprd run time
- Cai's fix for broken regex
- Fixing crashkernel syntax parsing
- Fix initscript to return proper LSB return codes
- Fixed bad call to resolve_dm_name
- Added poweroff option to mkdumprd
- Fixed readlink issue
- Fixed x86_64 page_offset specifictaion
- Fixed lvm setup loop to not hang
- Added utsname support to makedumpfile for 2.6.32
- Fix critical_disks list to exclude cciss/md
- Add help info for -b option
- Add ability to handle firmware hotplug events
- Update mkdumprd to deal with changes in busybox fsck
- Vitaly's fix to detect need for 64 bit elf
- Fix major/minor numbers on /dev/rtc
- Fix ssh id propogation w/ selinux
- Add blacklist feature to kdump.conf
- Removed rhpl code from firstboot
- Fixed firstboot enable sense
- Remove bogus debug comment from mkdumprd.
- Handle SPARSEMEM properly
- Fix scp monitoring script
- Fix firstboot to find grub on EFI systems
- Fixed mkdumprd to remove dup insmod
- Fixed kdump fsck pause
- Fixed kdump option handling
- fixed raid5 module detection

* Thu Mar 11 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-33
- Remove nash references from mkdumprd

* Wed Feb 17 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-32
- Fixed spec file error

* Wed Feb 17 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-31
- Adding kdump.conf man page
- Adding disk timeout parameter (bz 566135)

* Tue Dec 01 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-30
- Fix raid support in mkdumprd (bz 519767)

* Mon Nov 23 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-29
- Updating firstboot script to RHEL-6 version (bz 539812)

* Fri Nov 06 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-28
- Added abrt infrastructure to kdump init script (bz 533370)

* Tue Sep 15 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-27
- Fixing permissions on dracut module files

* Fri Sep 11 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-26
- Rebuild for translation team (bz 522415)

* Thu Sep 10 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-25
- Fix dracut module check file (bz 522486)

* Thu Aug 13 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-24
- update kdump adv conf init script & dracut module

* Wed Jul 29 2009 Neil Horman <nhorman@redhat.com> - 2.0,0-23
- Remove mkdumprd2 and start replacement with dracut

* Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.0-22
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild

* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-21
- Fixed build break

* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-20
- Make makedumpfile a dynamic binary

* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-19
- Fix build issue 

* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-18
- Updated initscript to use mkdumprd2 if manifest is present
- Updated spec to require dash
- Updated sample manifest to point to correct initscript
- Updated populate_std_files helper to fix sh symlink

* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-17
- Fixed mkdumprd2 tarball creation

* Tue Jun 23 2009 Neil Horman <nhorman@redhat.com> 2.0.0-16
- Fix up kdump so it works with latest firstboot

* Mon Jun 15 2009 Neil Horman <nhorman@redhat.com> 2.0.0-15
- Fixed some stat drive detect bugs by E. Biederman (bz505701)

* Wed May 20 2009 Neil Horman <nhorman@redhat.com> 2.0.0-14
- Put early copy of mkdumprd2 out in the wild (bz 466392)

* Fri May 08 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-13
- Update makedumpfile to v 1.3.3 (bz 499849)

* Tue Apr 07 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-12
- Simplifed rootfs mounting code in mkdumprd (bz 494416)

* Sun Apr 05 2009 Lubomir Rintel <lkundrak@v3.sk> - 2.0.0-11
- Install the correct configuration for i586

* Fri Apr 03 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-10
- Fix problem with quoted CORE_COLLECTOR string (bz 493707)

* Thu Apr 02 2009 Orion Poplawski <orion@cora.nwra.com> - 2.0.0-9
- Add BR glibc-static

* Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.0-8
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild

* Thu Dec 04 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.0.0-7
- Rebuild for Python 2.6

* Mon Dec 01 2008 Neil Horman <nhorman@redhat.com> - 2.0.0.6
- adding makedumpfile man page updates (bz 473212)

* Mon Dec 01 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.0.0-5
- Rebuild for Python 2.6

* Wed Nov 05 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-3
- Correct source file to use proper lang package (bz 335191)

* Wed Oct 29 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-2
- Fix mkdumprd typo (bz 469001)

* Mon Sep 15 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-2
- Fix sysconfig files to not specify --args-linux on x86 (bz 461615)

* Wed Aug 27 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-1
- Update kexec-tools to latest upstream version

* Wed Aug 27 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-16
- Fix mkdumprd to properly use UUID/LABEL search (bz 455998)

* Tue Aug  5 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 1.102pre-15
- fix license tag

* Mon Jul 28 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-14
- Add video reset section to docs (bz 456572)

* Fri Jul 11 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-13
- Fix mkdumprd to support dynamic busybox (bz 443878)

* Wed Jun 11 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-12
- Added lvm to bin list (bz 443878)

* Thu Jun 05 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-11
- Update to latest makedumpfile from upstream
- Mass import of RHEL fixes missing in rawhide

* Thu Apr 24 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-10
- Fix mkdumprd to properly pull in libs for lvm/mdadm (bz 443878)

* Wed Apr 16 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-9
- Fix cmdline length issue

* Tue Mar 25 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-8
- Fixing ARCH definition for bz 438661

* Mon Mar 24 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-7
- Adding patches for bz 438661

* Fri Feb 22 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-6
- Bringing rawhide up to date with bugfixes from RHEL5
- Adding patch to prevent kexec buffer overflow on ppc (bz 428684)

* Tue Feb 19 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-5
- Modifying mkdumprd to include dynamic executibles (bz 433350)

* Tue Feb 12 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-4
- bumping rev number for rebuild

* Wed Jan 02 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-3
- Fix ARCH placement in kdump init script (bz 427201)
- Fix BuildRequires
- Fix Makedumpfile to build with new libelf

* Mon Oct 01 2007 Neil Horman <nhorman@redhat.com> - 1.102pre-2
- Fix triggerpostun script (bz 308151)

* Thu Aug 30 2007 Neil Horman <nhorman@redhat.com> - 1.102pre-1
- Bumping kexec version to latest horms tree (bz 257201)
- Adding trigger to remove initrds when a kernel is removed

* Wed Aug 22 2007 Neil Horman <nhorman@redhat.com> - 1.101-81
- Add xen-syms patch to makedumpfile (bz 250341)

* Wed Aug 22 2007 Neil Horman <nhorman@redhat.com> - 1.101-80
- Fix ability to determine space on nfs shares (bz 252170)

* Tue Aug 21 2007 Neil Horman <nhorman@redhat.com> - 1.101-79
- Update kdump.init to always create sparse files (bz 253714)

* Fri Aug 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-78
- Update init script to handle xen kernel cmdlnes (bz 250803)

* Wed Aug 01 2007 Neil Horman <nhorman@redhat.com> - 1.101-77
- Update mkdumprd to suppres notifications /rev makedumpfile (bz 250341)

* Thu Jul 19 2007 Neil Horman <nhorman@redhat.com> - 1.101-76
- Fix mkdumprd to suppress informative messages (bz 248797)

* Wed Jul 18 2007 Neil Horman <nhorman@redhat.com> - 1.101-75
- Updated fr.po translations (bz 248287)

* Tue Jul 17 2007 Neil Horman <nhorman@redhat.com> - 1.101-74
- Fix up add_buff to retry locate_hole on segment overlap (bz 247989)

* Mon Jul 09 2007 Neil Horman <nhorman@redhat.com> - 1.101-73
- Fix up language files for kexec (bz 246508)

* Thu Jul 05 2007 Neil Horman <nhorman@redhat.com> - 1.101-72
- Fixing up initscript for LSB (bz 246967)

* Tue Jun 19 2007 Neil Horman <nhorman@redhat.com> - 1.101-71
- Fixed conflict in mkdumprd in use of /mnt (bz 222911)

* Mon Jun 18 2007 Neil Horman <nhorman@redhat.com> - 1.101-70
- Fixed kdump.init to properly read cmdline (bz 244649)

* Wed Apr 11 2007 Neil Horman <nhorman@redhat.com> - 1.101-69
- Fixed up kdump.init to enforce mode 600 on authorized_keys2 (bz 235986)

* Tue Apr 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-68
- Fix alignment of bootargs and device-tree structures on ppc64

* Tue Apr 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-67
- Allow ppc to boot ppc64 kernels (bz 235608)

* Tue Apr 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-66
- Reduce rmo_top to 0x7c000000 for PS3 (bz 235030)

* Mon Mar 26 2007 Neil Horman <nhorman@redhat.com> - 1.101-65
- Fix spec to own kexec_tools directory (bz 219035)

* Wed Mar 21 2007 Neil Horman <nhorman@redhat.com> - 1.101-64
- Add fix for ppc memory region computation (bz 233312)

* Thu Mar 15 2007 Neil Horman <nhorman@redhat.com> - 1.101-63
- Adding extra check to avoid oom kills on nfs mount failure (bz 215056)

* Tue Mar 06 2007 Neil Horman <nhorman@redhat.com> - 1.101-62
- Updating makedumpfile to version 1.1.1 (bz 2223743)

* Thu Feb 22 2007 Neil Horman <nhorman@redhat.com> - 1.101-61
- Adding multilanguage infrastructure to firstboot_kdump (bz 223175)

* Mon Feb 12 2007 Neil Horman <nhorman@redhat.com> - 1.101-60
- Fixing up file permissions on kdump.conf (bz 228137)

* Fri Feb 09 2007 Neil Horman <nhorman@redhat.com> - 1.101-59
- Adding mkdumprd man page to build

* Thu Jan 25 2007 Neil Horman <nhorman@redhat.com> - 1.101-58
- Updating kdump.init and mkdumprd with most recent RHEL5 fixes
- Fixing BuildReq to require elfutils-devel-static

* Thu Jan 04 2007 Neil Horman <nhorman@redhat.com> - 1.101-56
- Fix option parsing problem for bzImage files (bz 221272)

* Fri Dec 15 2006 Neil Horman <nhorman@redhat.com> - 1.101-55
- Wholesale update of RHEL5 revisions 55-147

* Tue Aug 29 2006 Neil Horman <nhorman@redhat.com> - 1.101-54
- integrate default elf format patch

* Tue Aug 29 2006 Neil Horman <nhorman@redhat.com> - 1.101-53
- Taking Viveks x86_64 crashdump patch (rcv. via email)

* Tue Aug 29 2006 Neil Horman <nhorman@redhat.com> - 1.101-52
- Taking ia64 tools patch for bz 181358

* Mon Aug 28 2006 Neil Horman <nhorman@redhat.com> - 1.101-51
- more doc updates
- added patch to fix build break from kernel headers change

* Thu Aug 24 2006 Neil Horman <nhorman@redhat.com> - 1.101-50
- repo patch to enable support for relocatable kernels.

* Thu Aug 24 2006 Neil Horman <nhorman@redhat.com> - 1.101-49
- rewriting kcp to properly do ssh and scp
- updating mkdumprd to use new kcp syntax

* Wed Aug 23 2006 Neil Horman <nhorman@redhat.com> - 1.101-48
- Bumping revision number 

* Tue Aug 22 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-47
- ppc64 no-more-platform fix

* Mon Aug 21 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-46
- ppc64 fixups:
  - actually build ppc64 binaries (bug 203407)
  - correct usage output
  - avoid segfault in command-line parsing
- install kexec man page
- use regulation Fedora BuildRoot

* Fri Aug 18 2006 Neil Horman <nhorman@redhat.com> - 1.101-45
- fixed typo in mkdumprd for bz 202983
- fixed typo in mkdumprd for bz 203053
- clarified docs in kdump.conf with examples per bz 203015

* Tue Aug 15 2006 Neil Horman <nhorman@redhat.com> - 1.101-44
- updated init script to implement status function/scrub err messages
 
* Wed Aug 09 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-43
- Misc spec cleanups and macro-ifications

* Wed Aug 09 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-42
- Add %%dir /var/crash, so default kdump setup works

* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-41
- fix another silly makefile error for makedumpfile 

* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-40
- exclude makedumpfile from build on non-x86[_64] arches 

* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-39
- exclude makedumpfile from build on non-x86[_64] arches 

* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-38
- updating makedumpfile makefile to use pkg-config on glib-2.0

* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-37
- updating makedumpfile makefile to use pkg-config

* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-36
- Removing unneeded deps after Makefile fixup for makedumpfile

* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-35
- fixing up FC6/RHEL5 BuildRequires line to build in brew

* Wed Aug 02 2006 Neil Horman <nhorman@redhat.com> - 1.101-34
- enabling makedumpfile in build

* Wed Aug 02 2006 Neil Horman <nhorman@redhat.com> - 1.101-33
- added makedumpfile source to package

* Mon Jul 31 2006 Neil Horman <nhorman@redhat.com> - 1.101-32
- added et-dyn patch to allow loading of relocatable kernels

* Thu Jul 27 2006 Neil Horman <nhorman@redhat.com> - 1.101-30
- fixing up missing patch to kdump.init

* Wed Jul 19 2006 Neil Horman <nhorman@redhat.com> - 1.101-30
- add kexec frontend (bz 197695)

* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1.101-29
- rebuild

* Fri Jul 07 2006 Neil Horman <nhorman@redhat.com> 1.101-27.fc6
- Buildrequire zlib-devel

* Thu Jun 22 2006 Neil Horman <nhorman@redhat.com> -1.101-19
- Bumping rev number

* Thu Jun 22 2006 Neil Horman <nhorman@redhat.com> -1.101-17
- Add patch to allow ppc64 to ignore args-linux option

* Wed Mar 08 2006 Bill Nottingham <notting@redhat.com> - 1.101-16
- fix scriptlet - call chkconfig --add, change the default in the
  script itself (#183633)

* Wed Mar 08 2006 Thomas Graf <tgraf@redhat.com> - 1.101-15
- Don't add kdump service by default, let the user manually add it to
  avoid everyone seeing a warning.

* Tue Mar 07 2006 Thomas Graf <tgraf@redhat.com> - 1.101-14
- Fix kdump.init to call kexec from its new location

* Mon Mar  6 2006 Jeremy Katz <katzj@redhat.com> - 1.101-13
- proper requires for scriptlets

* Mon Mar 06 2006 Thomas Graf <tgraf@redhat.com> - 1.101-12
- Move kexec and kdump binaries to /sbin

* Thu Mar 02 2006 Thomas Graf <tgraf@redhat.com> - 1.101-11
- Fix argument order when stopping kexec

* Mon Feb 27 2006 Thomas Graf <tgraf@redhat.com> - 1.101-10
- kdump7.patch
   o Remove elf32 core headers support for x86_64
   o Fix x86 prepare elf core header routine
   o Fix ppc64 kexec -p failure for gcc 4.10
   o Fix few warnings for gcc 4.10
   o Add the missing --initrd option for ppc64
   o Fix ppc64 persistent root device bug
- Remove --elf32-core-headers from default configuration, users
  may re-add it via KEXEC_ARGS.
- Remove obsolete KEXEC_HEADERS
* Wed Feb 22 2006 Thomas Graf <tgraf@redhat.com> - 1.101-9
- Remove wrong quotes around --command-line in kdump.init

* Fri Feb 17 2006 Jeff Moyer <jmoyer@redhat.com> - 1.101-8
- Fix the service stop case.  It was previously unloading the wrong kernel.
- Implement the "restart" function.
- Add the "irqpoll" option as a default kdump kernel commandline parameter.
- Create a default kernel command line in the sysconfig file upon rpm install.

* Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1.101-7.1.1
- rebuilt for new gcc4.1 snapshot and glibc changes

* Thu Feb 02 2006 Thomas Graf <tgraf@redhat.com> - 1.101-7.1
- Add patch to enable the kdump binary for x86_64
* Wed Feb 01 2006 Thomas Graf <tgraf@redhat.com>
- New kdump patch to support s390 arch + various fixes
- Include kdump in x86_64 builds
* Mon Jan 30 2006 Thomas Graf <tgraf@redhat.com>
- New kdump patch to support x86_64 userspace

* Fri Dec 16 2005 Jesse Keating <jkeating@redhat.com>
- rebuilt for new gcj

* Wed Nov 16 2005 Thomas Graf <tgraf@redhat.com> - 1.101-5
- Report missing kdump kernel image as warning
 
* Thu Nov  3 2005 Jeff Moyer <jmoyer@redhat.com> - 1.101-4
- Build for x86_64 as well.  Kdump support doesn't work there, but users
  should be able to use kexec.

* Fri Sep 23 2005 Jeff Moyer <jmoyer@redhat.com> - 1.101-3
- Add a kdump sysconfig file and init script
- Spec file additions for pre/post install/uninstall

* Thu Aug 25 2005 Jeff Moyer <jmoyer@redhat.com>
- Initial prototype for RH/FC5
Powered by Pagure 5.13.3
Documentation • File an Issue • About this Instance • SSH Hostkey/Fingerprint
© Red Hat, Inc. and others.