Blob Blame History Raw
From 2d9b6cb9bd00ede47635dc4db413f647143d5a1d Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Thu, 1 Mar 2012 23:55:11 +0100
Subject: [PATCH 135/140] usb-ehci: Fix and simplify nakcnt handling

The nakcnt code in ehci_execute_complete() marked transactions as finished
when a packet completed with a result of USB_RET_NAK, but USB_RET_NAK
means that the device cannot receive / send data at that time and that
the transaction should be retried later, which is also what the usb-uhci
and usb-ohci code does.

Note that there already was some special code in place to handle this
for interrupt endpoints in the form of doing a return from
ehci_execute_complete() when reload == 0, but that for bulk transactions
this was not handled correctly (where as for example the usb-ccid device does
return USB_RET_NAK for bulk packets).

Besides that the code in ehci_execute_complete() decrement nakcnt by 1
on a packet result of USB_RET_NAK, but
-since the transaction got marked as finished,
 nakcnt would never be decremented again
-there is no code checking for nakcnt becoming 0
-there is no use in re-trying the transaction within the same usb frame /
 usb-ehci frame-timer call, since the status of emulated devices won't change
 as long as the usb-ehci frame-timer is running
So we should simply set the nakcnt to 0 when we get a USB_RET_NAK, thus
claiming that we've tried reload times (or as many times as possible if
reload is 0).

Besides the code in ehci_execute_complete() handling USB_RET_NAK there
was also code handling it in ehci_state_executing(), which calls
ehci_execute_complete(), and then does its own handling on top of the handling
in ehci_execute_complete(), this code would decrement nakcnt *again* (if not
already 0), or restore the reload value (which was never changed) on success.

Since the double decrement was wrong to begin with, and is no longer needed
now that we set nakcnt directly to 0 on USB_RET_NAK, and the restore of reload
is not needed either, this patch simply removes all nakcnt handling from
ehci_state_executing().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 hw/usb-ehci.c |   32 ++++----------------------------
 1 file changed, 4 insertions(+), 28 deletions(-)

diff --git a/hw/usb-ehci.c b/hw/usb-ehci.c
index 92cdf2a..aa6fae5 100644
--- a/hw/usb-ehci.c
+++ b/hw/usb-ehci.c
@@ -1269,8 +1269,6 @@ static void ehci_async_complete_packet(USBPort *port, USBPacket *packet)
 
 static void ehci_execute_complete(EHCIQueue *q)
 {
-    int reload;
-
     assert(q->async != EHCI_ASYNC_INFLIGHT);
     q->async = EHCI_ASYNC_NONE;
 
@@ -1289,16 +1287,8 @@ static void ehci_execute_complete(EHCIQueue *q)
             ehci_record_interrupt(q->ehci, USBSTS_ERRINT);
             break;
         case USB_RET_NAK:
-            /* 4.10.3 */
-            reload = get_field(q->qh.epchar, QH_EPCHAR_RL);
-            if ((q->pid == USB_TOKEN_IN) && reload) {
-                int nakcnt = get_field(q->qh.altnext_qtd, QH_ALTNEXT_NAKCNT);
-                nakcnt--;
-                set_field(&q->qh.altnext_qtd, nakcnt, QH_ALTNEXT_NAKCNT);
-            } else if (!reload) {
-                return;
-            }
-            break;
+            set_field(&q->qh.altnext_qtd, 0, QH_ALTNEXT_NAKCNT);
+            return; /* We're not done yet with this transaction */
         case USB_RET_BABBLE:
             q->qh.token |= (QTD_TOKEN_HALT | QTD_TOKEN_BABBLE);
             ehci_record_interrupt(q->ehci, USBSTS_ERRINT);
@@ -1331,7 +1321,7 @@ static void ehci_execute_complete(EHCIQueue *q)
     q->qh.token ^= QTD_TOKEN_DTOGGLE;
     q->qh.token &= ~QTD_TOKEN_ACTIVE;
 
-    if ((q->usb_status != USB_RET_NAK) && (q->qh.token & QTD_TOKEN_IOC)) {
+    if (q->qh.token & QTD_TOKEN_IOC) {
         ehci_record_interrupt(q->ehci, USBSTS_INT);
     }
 }
@@ -1905,7 +1895,6 @@ out:
 static int ehci_state_executing(EHCIQueue *q, int async)
 {
     int again = 0;
-    int reload, nakcnt;
 
     ehci_execute_complete(q);
     if (q->usb_status == USB_RET_ASYNC) {
@@ -1925,21 +1914,8 @@ static int ehci_state_executing(EHCIQueue *q, int async)
         // counter decrements to 0
     }
 
-    reload = get_field(q->qh.epchar, QH_EPCHAR_RL);
-    if (reload) {
-        nakcnt = get_field(q->qh.altnext_qtd, QH_ALTNEXT_NAKCNT);
-        if (q->usb_status == USB_RET_NAK) {
-            if (nakcnt) {
-                nakcnt--;
-            }
-        } else {
-            nakcnt = reload;
-        }
-        set_field(&q->qh.altnext_qtd, nakcnt, QH_ALTNEXT_NAKCNT);
-    }
-
     /* 4.10.5 */
-    if ((q->usb_status == USB_RET_NAK) || (q->qh.token & QTD_TOKEN_ACTIVE)) {
+    if (q->usb_status == USB_RET_NAK) {
         ehci_set_state(q->ehci, async, EST_HORIZONTALQH);
     } else {
         ehci_set_state(q->ehci, async, EST_WRITEBACK);
-- 
1.7.9.3