#global candidate rc4
Name: uboot-tools
Version: 2018.03
Release: 4%{?candidate:.%{candidate}}%{?dist}
Summary: U-Boot utilities
License: GPLv2+ BSD LGPL-2.1+ LGPL-2.0+
URL: http://www.denx.de/wiki/U-Boot
Source0: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}%{?candidate:-%{candidate}}.tar.bz2
Source1: arm-boards
Source2: arm-chromebooks
Source3: aarch64-boards
Source4: aarch64-chromebooks
Source5: 10-devicetree.install
# Fedoraisms patches
Patch1: uefi-use-Fedora-specific-path-name.patch
# general fixes
Patch2: uefi-distro-load-FDT-from-any-partition-on-boot-device.patch
Patch3: usb-kbd-fixes.patch
Patch4: Add-fix-for-Pine64-gigabit-throughput-issues.patch
Patch5: rk33xx-make_fit_atf-fix.patch
Patch6: rk33xx-enable-make-itb.patch
Patch7: net-Only-access-network-devices-after-init.patch
# Board fixes and enablement
Patch10: dragonboard-fixes.patch
Patch11: BeagleBoard.org-PocketBeagle.patch
Patch12: mx6cuboxi-add-support-for-detecting-Revision-1.5-SoM.patch
Patch13: rpi-3-plus-support.patch
Patch14: rpi-Allow-to-boot-without-serial.patch
Patch15: rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch
Patch16: mmc-use-core-clock-frequency-in-bcm2835-sdhost.patch
Patch19: mmc-mv_sdhci-zero-out-sdhci_host-structure.patch
Patch20: mvneta-support-setting-hardware-address.patch
Patch21: sunxi-improve-throughput-in-the-sunxi_mmc-driver.patch
# Patch99: mvebu-enable-generic-distro-boot-config.patch
BuildRequires: bc
BuildRequires: dtc
BuildRequires: gcc make
BuildRequires: git-core
BuildRequires: openssl-devel
BuildRequires: python2-devel
BuildRequires: python2-setuptools
BuildRequires: python2-libfdt
BuildRequires: python2-pyelftools
BuildRequires: SDL-devel
BuildRequires: swig
%ifarch %{arm} aarch64
BuildRequires: vboot-utils
%endif
%ifarch aarch64
BuildRequires: arm-trusted-firmware-armv8
%endif
Requires: dtc
Requires: systemd
%description
This package contains a few U-Boot utilities - mkimage for creating boot images
and fw_printenv/fw_setenv for manipulating the boot environment variables.
%ifarch aarch64
%package -n uboot-images-armv8
Summary: u-boot bootloader images for aarch64 boards
Requires: uboot-tools
BuildArch: noarch
%description -n uboot-images-armv8
u-boot bootloader binaries for aarch64 boards
%endif
%ifarch %{arm}
%package -n uboot-images-armv7
Summary: u-boot bootloader images for armv7 boards
Requires: uboot-tools
BuildArch: noarch
%description -n uboot-images-armv7
u-boot bootloader binaries for armv7 boards
%endif
%ifarch %{arm} aarch64
%package -n uboot-images-elf
Summary: u-boot bootloader images for armv7 boards
Requires: uboot-tools
Obsoletes: uboot-images-qemu
Provides: uboot-images-qemu
%description -n uboot-images-elf
u-boot bootloader ELF binaries for use with qemu and other platforms
%endif
%prep
%setup -q -n u-boot-%{version}%{?candidate:-%{candidate}}
git init
git config --global gc.auto 0
git config user.email "noone@example.com"
git config user.name "no one"
git add .
git commit -a -q -m "%{version} baseline"
git am %{patches} </dev/null
git config --unset user.email
git config --unset user.name
rm -rf .git
cp %SOURCE1 %SOURCE2 %SOURCE3 %SOURCE4 .
%build
mkdir builds
%ifarch aarch64 %{arm}
for board in $(cat %{_arch}-boards)
do
echo "Building board: $board"
mkdir builds/$(echo $board)/
# ATF selection, needs improving, suggestions of ATF SoC to Board matrix welcome
sun50i=(pine64_plus a64-olinuxino bananapi_m64 nanopi_a64 nanopi_neo2 orangepi_pc2 orangepi_prime orangepi_win orangepi_zero_plus2 sopine_baseboard)
if [[ " ${sun50i[*]} " == *" $board "* ]]; then
echo "Board: $board using sun50iw1p1"
cp /usr/share/arm-trusted-firmware/sun50iw1p1/* builds/$(echo $board)/
fi
rk3399=(evb-rk3399 firefly-rk3399)
if [[ " ${rk3399[*]} " == *" $board "* ]]; then
echo "Board: $board using rk3399"
cp /usr/share/arm-trusted-firmware/rk3399/* builds/$(echo $board)/
fi
# End ATF
make $(echo $board)_defconfig O=builds/$(echo $board)/
make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 O=builds/$(echo $board)/
rk33xx=(evb-rk3399 firefly-rk3399)
if [[ " ${rk33xx[*]} " == *" $board "* ]]; then
echo "Board: $board using rk33xx"
make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" u-boot.itb V=1 O=builds/$(echo $board)/
fi
done
%endif
make HOSTCC="gcc $RPM_OPT_FLAGS" %{?_smp_mflags} CROSS_COMPILE="" defconfig V=1 O=builds/
make HOSTCC="gcc $RPM_OPT_FLAGS" %{?_smp_mflags} CROSS_COMPILE="" tools-all V=1 O=builds/
%install
mkdir -p $RPM_BUILD_ROOT%{_bindir}
mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}
mkdir -p $RPM_BUILD_ROOT%{_mandir}/man1
mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/
%ifarch aarch64
for board in $(cat %{_arch}-boards)
do
mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
for file in spl/*spl.bin u-boot.bin u-boot.dtb u-boot-dtb.img u-boot.img u-boot.itb spl/sunxi-spl.bin
do
if [ -f builds/$(echo $board)/$(echo $file) ]; then
install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
fi
done
done
%endif
%ifarch %{arm}
for board in $(cat %{_arch}-boards)
do
mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
for file in MLO SPL spl/arndale-spl.bin spl/origen-spl.bin spl/smdkv310-spl.bin spl/*spl.bin u-boot.bin u-boot.dtb u-boot-dtb-tegra.bin u-boot.img u-boot.imx u-boot-nodtb-tegra.bin u-boot-spl.kwb u-boot-sunxi-with-spl.bin
do
if [ -f builds/$(echo $board)/$(echo $file) ]; then
install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
fi
done
done
# Bit of a hack to remove binaries we don't use as they're large
for board in $(cat %{_arch}-boards)
do
if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot-sunxi-with-spl.bin ]; then
rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.*
fi
if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/MLO ]; then
rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
fi
if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/SPL ]; then
rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
fi
if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.imx ]; then
rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
fi
done
%endif
%ifarch aarch64
for board in $(cat %{_arch}-boards)
do
mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
for file in MLO SPL spl/arndale-spl.bin spl/origen-spl.bin spl/smdkv310-spl.bin u-boot.bin u-boot.dtb u-boot-dtb-tegra.bin u-boot.img u-boot.imx u-boot-nodtb-tegra.bin u-boot-spl.kwb u-boot-sunxi-with-spl.bin
do
if [ -f builds/$(echo $board)/$(echo $file) ]; then
install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
fi
done
done
%endif
# ELF binaries
%ifarch %{arm}
for board in vexpress_ca15_tc2 vexpress_ca9x4
do
mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/elf/$(echo $board)/
for file in u-boot
do
if [ -f builds/$(echo $board)/$(echo $file) ]; then
install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/elf/$(echo $board)/
fi
done
done
%endif
%ifarch aarch64
for board in $(cat %{_arch}-boards)
do
mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/elf/$(echo $board)/
for file in u-boot
do
if [ -f builds/$(echo $board)/$(echo $file) ]; then
install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/elf/$(echo $board)/
fi
done
done
%endif
for tool in bmp_logo dumpimage easylogo/easylogo env/fw_printenv fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr gen_ethaddr_crc img2srec mkenvimage mkimage mksunxiboot ncb proftool sunxi-spl-image-builder ubsha1 xway-swap-bytes
do
install -p -m 0755 builds/tools/$tool $RPM_BUILD_ROOT%{_bindir}
done
install -p -m 0644 doc/mkimage.1 $RPM_BUILD_ROOT%{_mandir}/man1
install -p -m 0755 builds/tools/env/fw_printenv $RPM_BUILD_ROOT%{_bindir}
( cd $RPM_BUILD_ROOT%{_bindir}; ln -sf fw_printenv fw_setenv )
install -p -m 0644 tools/env/fw_env.config $RPM_BUILD_ROOT%{_sysconfdir}
# systemd kernel-install script for device tree
mkdir -p $RPM_BUILD_ROOT/lib/kernel/install.d/
install -p -m 0755 %{SOURCE5} $RPM_BUILD_ROOT/lib/kernel/install.d/
# Copy sone useful docs over
mkdir -p builds/docs
cp -p board/amlogic/odroid-c2/README builds/docs/README.odroid-c2
cp -p board/hisilicon/hikey/README builds/docs/README.hikey
cp -p board/hisilicon/hikey/README builds/docs/README.hikey
cp -p board/Marvell/db-88f6820-gp/README builds/docs/README.mvebu-db-88f6820
cp -p board/rockchip/evb_rk3399/README builds/docs/README.evb_rk3399
cp -p board/solidrun/clearfog/README builds/docs/README.clearfog
cp -p board/solidrun/mx6cuboxi/README builds/docs/README.mx6cuboxi
cp -p board/sunxi/README.sunxi64 builds/docs/README.sunxi64
cp -p board/sunxi/README.nand builds/docs/README.sunxi-nand
cp -p board/ti/am335x/README builds/docs/README.am335x
cp -p board/ti/omap5_uevm/README builds/docs/README.omap5_uevm
cp -p board/udoo/README builds/docs/README.udoo
cp -p board/wandboard/README builds/docs/README.wandboard
cp -p board/warp/README builds/docs/README.warp
cp -p board/warp7/README builds/docs/README.warp7
%files
%doc README doc/README.imximage doc/README.kwbimage doc/README.distro doc/README.gpt
%doc doc/README.odroid doc/README.rockchip doc/README.efi doc/uImage.FIT doc/README.arm64
%doc doc/README.chromium builds/docs/*
%{_bindir}/*
%{_mandir}/man1/mkimage.1*
/lib/kernel/install.d/10-devicetree.install
%dir %{_datadir}/uboot/
%config(noreplace) %{_sysconfdir}/fw_env.config
%ifarch aarch64
%files -n uboot-images-armv8
%{_datadir}/uboot/*
%exclude %{_datadir}/uboot/elf
%endif
%ifarch %{arm}
%files -n uboot-images-armv7
%{_datadir}/uboot/*
%exclude %{_datadir}/uboot/elf
%endif
%ifarch %{arm} aarch64
%files -n uboot-images-elf
%{_datadir}/uboot/elf
%endif
%changelog
* Fri Apr 6 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-4
- Improvements for Raspberry Pi, AllWinner MMC perf, mvebu devices
* Tue Mar 20 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-3
- Fix issue with certain MMC cards on Raspberry Pi
* Fri Mar 16 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-2
- Add support for Raspberry Pi 3+
* Tue Mar 13 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-1
- 2018.03 GA
* Fri Mar 9 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.11.rc4
- Enable support for Jetson TX2
* Thu Mar 8 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.10.rc4
- Fix for Raspberry Pi 2 boot
* Wed Mar 7 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.9.rc4
- 2018.03 RC4
- Fixes for Raspberry Pi 3 boot
- Minor kernel install fixes
- Enable am335x_evm_usbspl for Beagle Pocket
- DragonBoard patch rebase
* Sun Mar 4 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.8.rc3
- Add support for SoM rev 1.5 to mx6cuboxi
- Rebuild for new ATF 1.5 rc0 release
* Sun Feb 25 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.7.rc3
- Build 64 bit Rockchips FIT images with ARM Trusted Firmware
* Tue Feb 20 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.6.rc3
- 2018.03 RC3
* Fri Feb 16 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.5.rc2
- A few upstream fixes
* Thu Feb 15 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.4.rc2
- Fix for GBps network on some AllWinner devices
* Tue Feb 13 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.3.rc2
- 2018.03 RC2
* Wed Feb 7 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.2.rc1
- Update uEFI patches
* Tue Jan 30 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.1.rc1
- 2018.03 RC1
* Tue Jan 9 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.01-1
- 2018.01
* Tue Jan 2 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.01-0.2.rc3
- 2018.01 RC3
* Tue Dec 19 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2018.01-0.1.rc2
- 2018.01 RC2
* Thu Nov 23 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2017.11-3
- Newer EFI loader fix patch
- Fix static MAC on omap3/omap4 devices
* Tue Nov 21 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2017.11-2
- Add EFI loader fix
* Wed Nov 15 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2017.11-1
- 2017.11
* Tue Nov 7 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2017.11-0.4.rc4
- 2017.11 RC4
* Sat Nov 4 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2017.11-0.3.rc3
- 2017.11 RC3
* Tue Oct 17 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2017.11-0.2.rc2
- Update / rebase a couple of patches
* Tue Oct 17 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2017.11-0.1.rc2
- 2017.11 RC2
* Tue Oct 10 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2017.09-4
- Improve uEFI partition detection for some devices
* Thu Oct 5 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2017.09-3
- Fix regression in i.MX6 and omap4 devices
- Improve DT detection support on aarch64
- uEFI fixes and improvements
- ENable Sinovoip BPI devices
* Wed Sep 27 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2017.09-2
- Add patch to fix some uEFI console output
- Minor other tweaks